summaryrefslogtreecommitdiffstats
path: root/drivers/input
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--drivers/input/joystick/xpad.c7
-rw-r--r--drivers/input/keyboard/atkbd.c13
-rw-r--r--drivers/input/serio/i8042-acpipnpio.h14
-rw-r--r--drivers/input/touchscreen/goodix.c3
4 files changed, 30 insertions, 7 deletions
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index e8011d70d..13c36f51b 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -294,6 +294,7 @@ static const struct xpad_device {
{ 0x1689, 0xfd00, "Razer Onza Tournament Edition", 0, XTYPE_XBOX360 },
{ 0x1689, 0xfd01, "Razer Onza Classic Edition", 0, XTYPE_XBOX360 },
{ 0x1689, 0xfe00, "Razer Sabertooth", 0, XTYPE_XBOX360 },
+ { 0x17ef, 0x6182, "Lenovo Legion Controller for Windows", 0, XTYPE_XBOX360 },
{ 0x1949, 0x041a, "Amazon Game Controller", 0, XTYPE_XBOX360 },
{ 0x1bad, 0x0002, "Harmonix Rock Band Guitar", 0, XTYPE_XBOX360 },
{ 0x1bad, 0x0003, "Harmonix Rock Band Drumkit", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
@@ -489,6 +490,7 @@ static const struct usb_device_id xpad_table[] = {
XPAD_XBOX360_VENDOR(0x15e4), /* Numark X-Box 360 controllers */
XPAD_XBOX360_VENDOR(0x162e), /* Joytech X-Box 360 controllers */
XPAD_XBOX360_VENDOR(0x1689), /* Razer Onza */
+ XPAD_XBOX360_VENDOR(0x17ef), /* Lenovo */
XPAD_XBOX360_VENDOR(0x1949), /* Amazon controllers */
XPAD_XBOX360_VENDOR(0x1bad), /* Harminix Rock Band Guitar and Drums */
XPAD_XBOX360_VENDOR(0x20d6), /* PowerA Controllers */
@@ -562,6 +564,9 @@ struct xboxone_init_packet {
#define GIP_MOTOR_LT BIT(3)
#define GIP_MOTOR_ALL (GIP_MOTOR_R | GIP_MOTOR_L | GIP_MOTOR_RT | GIP_MOTOR_LT)
+#define GIP_WIRED_INTF_DATA 0
+#define GIP_WIRED_INTF_AUDIO 1
+
/*
* This packet is required for all Xbox One pads with 2015
* or later firmware installed (or present from the factory).
@@ -2006,7 +2011,7 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
}
if (xpad->xtype == XTYPE_XBOXONE &&
- intf->cur_altsetting->desc.bInterfaceNumber != 0) {
+ intf->cur_altsetting->desc.bInterfaceNumber != GIP_WIRED_INTF_DATA) {
/*
* The Xbox One controller lists three interfaces all with the
* same interface class, subclass and protocol. Differentiate by
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index c4d8caade..661d6c8b0 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -792,7 +792,6 @@ static int atkbd_probe(struct atkbd *atkbd)
{
struct ps2dev *ps2dev = &atkbd->ps2dev;
unsigned char param[2];
- bool skip_getid;
/*
* Some systems, where the bit-twiddling when testing the io-lines of the
@@ -806,6 +805,11 @@ static int atkbd_probe(struct atkbd *atkbd)
"keyboard reset failed on %s\n",
ps2dev->serio->phys);
+ if (atkbd_skip_getid(atkbd)) {
+ atkbd->id = 0xab83;
+ return 0;
+ }
+
/*
* Then we check the keyboard ID. We should get 0xab83 under normal conditions.
* Some keyboards report different values, but the first byte is always 0xab or
@@ -814,18 +818,17 @@ static int atkbd_probe(struct atkbd *atkbd)
*/
param[0] = param[1] = 0xa5; /* initialize with invalid values */
- skip_getid = atkbd_skip_getid(atkbd);
- if (skip_getid || ps2_command(ps2dev, param, ATKBD_CMD_GETID)) {
+ if (ps2_command(ps2dev, param, ATKBD_CMD_GETID)) {
/*
- * If the get ID command was skipped or failed, we check if we can at least set
+ * If the get ID command failed, we check if we can at least set
* the LEDs on the keyboard. This should work on every keyboard out there.
* It also turns the LEDs off, which we want anyway.
*/
param[0] = 0;
if (ps2_command(ps2dev, param, ATKBD_CMD_SETLEDS))
return -1;
- atkbd->id = skip_getid ? 0xab83 : 0xabba;
+ atkbd->id = 0xabba;
return 0;
}
diff --git a/drivers/input/serio/i8042-acpipnpio.h b/drivers/input/serio/i8042-acpipnpio.h
index b585b1dab..dfc6c5818 100644
--- a/drivers/input/serio/i8042-acpipnpio.h
+++ b/drivers/input/serio/i8042-acpipnpio.h
@@ -635,6 +635,14 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
.driver_data = (void *)(SERIO_QUIRK_NOAUX)
},
{
+ /* Fujitsu Lifebook U728 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK U728"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOAUX)
+ },
+ {
/* Gigabyte M912 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"),
@@ -1210,6 +1218,12 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
},
{
.matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "NS5x_7xPU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOAUX)
+ },
+ {
+ .matches = {
DMI_MATCH(DMI_BOARD_NAME, "NJ50_70CU"),
},
.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c
index 3f0732db7..6de64b3f9 100644
--- a/drivers/input/touchscreen/goodix.c
+++ b/drivers/input/touchscreen/goodix.c
@@ -884,7 +884,8 @@ static int goodix_add_acpi_gpio_mappings(struct goodix_ts_data *ts)
}
}
- if (ts->gpio_count == 2 && ts->gpio_int_idx == 0) {
+ /* Some devices with gpio_int_idx 0 list a third unused GPIO */
+ if ((ts->gpio_count == 2 || ts->gpio_count == 3) && ts->gpio_int_idx == 0) {
ts->irq_pin_access_method = IRQ_PIN_ACCESS_ACPI_GPIO;
gpio_mapping = acpi_goodix_int_first_gpios;
} else if (ts->gpio_count == 2 && ts->gpio_int_idx == 1) {