diff options
Diffstat (limited to 'drivers/irqchip/irq-gic-common.c')
| -rw-r--r-- | drivers/irqchip/irq-gic-common.c | 150 |
1 files changed, 150 insertions, 0 deletions
diff --git a/drivers/irqchip/irq-gic-common.c b/drivers/irqchip/irq-gic-common.c new file mode 100644 index 000000000..afd6a1841 --- /dev/null +++ b/drivers/irqchip/irq-gic-common.c @@ -0,0 +1,150 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2002 ARM Limited, All Rights Reserved. + */ + +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/irqchip/arm-gic.h> + +#include "irq-gic-common.h" + +static DEFINE_RAW_SPINLOCK(irq_controller_lock); + +void gic_enable_of_quirks(const struct device_node *np, + const struct gic_quirk *quirks, void *data) +{ + for (; quirks->desc; quirks++) { + if (!quirks->compatible && !quirks->property) + continue; + if (quirks->compatible && + !of_device_is_compatible(np, quirks->compatible)) + continue; + if (quirks->property && + !of_property_read_bool(np, quirks->property)) + continue; + if (quirks->init(data)) + pr_info("GIC: enabling workaround for %s\n", + quirks->desc); + } +} + +void gic_enable_quirks(u32 iidr, const struct gic_quirk *quirks, + void *data) +{ + for (; quirks->desc; quirks++) { + if (quirks->compatible || quirks->property) + continue; + if (quirks->iidr != (quirks->mask & iidr)) + continue; + if (quirks->init(data)) + pr_info("GIC: enabling workaround for %s\n", + quirks->desc); + } +} + +int gic_configure_irq(unsigned int irq, unsigned int type, + void __iomem *base, void (*sync_access)(void)) +{ + u32 confmask = 0x2 << ((irq % 16) * 2); + u32 confoff = (irq / 16) * 4; + u32 val, oldval; + int ret = 0; + unsigned long flags; + + /* + * Read current configuration register, and insert the config + * for "irq", depending on "type". + */ + raw_spin_lock_irqsave(&irq_controller_lock, flags); + val = oldval = readl_relaxed(base + confoff); + if (type & IRQ_TYPE_LEVEL_MASK) + val &= ~confmask; + else if (type & IRQ_TYPE_EDGE_BOTH) + val |= confmask; + + /* If the current configuration is the same, then we are done */ + if (val == oldval) { + raw_spin_unlock_irqrestore(&irq_controller_lock, flags); + return 0; + } + + /* + * Write back the new configuration, and possibly re-enable + * the interrupt. If we fail to write a new configuration for + * an SPI then WARN and return an error. If we fail to write the + * configuration for a PPI this is most likely because the GIC + * does not allow us to set the configuration or we are in a + * non-secure mode, and hence it may not be catastrophic. + */ + writel_relaxed(val, base + confoff); + if (readl_relaxed(base + confoff) != val) + ret = -EINVAL; + + raw_spin_unlock_irqrestore(&irq_controller_lock, flags); + + if (sync_access) + sync_access(); + + return ret; +} + +void gic_dist_config(void __iomem *base, int gic_irqs, + void (*sync_access)(void)) +{ + unsigned int i; + + /* + * Set all global interrupts to be level triggered, active low. + */ + for (i = 32; i < gic_irqs; i += 16) + writel_relaxed(GICD_INT_ACTLOW_LVLTRIG, + base + GIC_DIST_CONFIG + i / 4); + + /* + * Set priority on all global interrupts. + */ + for (i = 32; i < gic_irqs; i += 4) + writel_relaxed(GICD_INT_DEF_PRI_X4, base + GIC_DIST_PRI + i); + + /* + * Deactivate and disable all SPIs. Leave the PPI and SGIs + * alone as they are in the redistributor registers on GICv3. + */ + for (i = 32; i < gic_irqs; i += 32) { + writel_relaxed(GICD_INT_EN_CLR_X32, + base + GIC_DIST_ACTIVE_CLEAR + i / 8); + writel_relaxed(GICD_INT_EN_CLR_X32, + base + GIC_DIST_ENABLE_CLEAR + i / 8); + } + + if (sync_access) + sync_access(); +} + +void gic_cpu_config(void __iomem *base, int nr, void (*sync_access)(void)) +{ + int i; + + /* + * Deal with the banked PPI and SGI interrupts - disable all + * private interrupts. Make sure everything is deactivated. + */ + for (i = 0; i < nr; i += 32) { + writel_relaxed(GICD_INT_EN_CLR_X32, + base + GIC_DIST_ACTIVE_CLEAR + i / 8); + writel_relaxed(GICD_INT_EN_CLR_X32, + base + GIC_DIST_ENABLE_CLEAR + i / 8); + } + + /* + * Set priority on PPI and SGI interrupts + */ + for (i = 0; i < nr; i += 4) + writel_relaxed(GICD_INT_DEF_PRI_X4, + base + GIC_DIST_PRI + i * 4 / 4); + + if (sync_access) + sync_access(); +} |