summaryrefslogtreecommitdiffstats
path: root/drivers/leds/leds-lp5523.c
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--drivers/leds/leds-lp5523.c993
1 files changed, 993 insertions, 0 deletions
diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c
new file mode 100644
index 000000000..369d40b0b
--- /dev/null
+++ b/drivers/leds/leds-lp5523.c
@@ -0,0 +1,993 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * lp5523.c - LP5523, LP55231 LED Driver
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Copyright (C) 2012 Texas Instruments
+ *
+ * Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
+ * Milo(Woogyom) Kim <milo.kim@ti.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/firmware.h>
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/platform_data/leds-lp55xx.h>
+#include <linux/slab.h>
+
+#include "leds-lp55xx-common.h"
+
+#define LP5523_PROGRAM_LENGTH 32 /* bytes */
+/* Memory is used like this:
+ * 0x00 engine 1 program
+ * 0x10 engine 2 program
+ * 0x20 engine 3 program
+ * 0x30 engine 1 muxing info
+ * 0x40 engine 2 muxing info
+ * 0x50 engine 3 muxing info
+ */
+#define LP5523_MAX_LEDS 9
+
+/* Registers */
+#define LP5523_REG_ENABLE 0x00
+#define LP5523_REG_OP_MODE 0x01
+#define LP5523_REG_ENABLE_LEDS_MSB 0x04
+#define LP5523_REG_ENABLE_LEDS_LSB 0x05
+#define LP5523_REG_LED_CTRL_BASE 0x06
+#define LP5523_REG_LED_PWM_BASE 0x16
+#define LP5523_REG_LED_CURRENT_BASE 0x26
+#define LP5523_REG_CONFIG 0x36
+#define LP5523_REG_STATUS 0x3A
+#define LP5523_REG_RESET 0x3D
+#define LP5523_REG_LED_TEST_CTRL 0x41
+#define LP5523_REG_LED_TEST_ADC 0x42
+#define LP5523_REG_MASTER_FADER_BASE 0x48
+#define LP5523_REG_CH1_PROG_START 0x4C
+#define LP5523_REG_CH2_PROG_START 0x4D
+#define LP5523_REG_CH3_PROG_START 0x4E
+#define LP5523_REG_PROG_PAGE_SEL 0x4F
+#define LP5523_REG_PROG_MEM 0x50
+
+/* Bit description in registers */
+#define LP5523_ENABLE 0x40
+#define LP5523_AUTO_INC 0x40
+#define LP5523_PWR_SAVE 0x20
+#define LP5523_PWM_PWR_SAVE 0x04
+#define LP5523_CP_AUTO 0x18
+#define LP5523_AUTO_CLK 0x02
+
+#define LP5523_EN_LEDTEST 0x80
+#define LP5523_LEDTEST_DONE 0x80
+#define LP5523_RESET 0xFF
+#define LP5523_ADC_SHORTCIRC_LIM 80
+#define LP5523_EXT_CLK_USED 0x08
+#define LP5523_ENG_STATUS_MASK 0x07
+
+#define LP5523_FADER_MAPPING_MASK 0xC0
+#define LP5523_FADER_MAPPING_SHIFT 6
+
+/* Memory Page Selection */
+#define LP5523_PAGE_ENG1 0
+#define LP5523_PAGE_ENG2 1
+#define LP5523_PAGE_ENG3 2
+#define LP5523_PAGE_MUX1 3
+#define LP5523_PAGE_MUX2 4
+#define LP5523_PAGE_MUX3 5
+
+/* Program Memory Operations */
+#define LP5523_MODE_ENG1_M 0x30 /* Operation Mode Register */
+#define LP5523_MODE_ENG2_M 0x0C
+#define LP5523_MODE_ENG3_M 0x03
+#define LP5523_LOAD_ENG1 0x10
+#define LP5523_LOAD_ENG2 0x04
+#define LP5523_LOAD_ENG3 0x01
+
+#define LP5523_ENG1_IS_LOADING(mode) \
+ ((mode & LP5523_MODE_ENG1_M) == LP5523_LOAD_ENG1)
+#define LP5523_ENG2_IS_LOADING(mode) \
+ ((mode & LP5523_MODE_ENG2_M) == LP5523_LOAD_ENG2)
+#define LP5523_ENG3_IS_LOADING(mode) \
+ ((mode & LP5523_MODE_ENG3_M) == LP5523_LOAD_ENG3)
+
+#define LP5523_EXEC_ENG1_M 0x30 /* Enable Register */
+#define LP5523_EXEC_ENG2_M 0x0C
+#define LP5523_EXEC_ENG3_M 0x03
+#define LP5523_EXEC_M 0x3F
+#define LP5523_RUN_ENG1 0x20
+#define LP5523_RUN_ENG2 0x08
+#define LP5523_RUN_ENG3 0x02
+
+#define LED_ACTIVE(mux, led) (!!(mux & (0x0001 << led)))
+
+enum lp5523_chip_id {
+ LP5523,
+ LP55231,
+};
+
+static int lp5523_init_program_engine(struct lp55xx_chip *chip);
+
+static inline void lp5523_wait_opmode_done(void)
+{
+ usleep_range(1000, 2000);
+}
+
+static void lp5523_set_led_current(struct lp55xx_led *led, u8 led_current)
+{
+ led->led_current = led_current;
+ lp55xx_write(led->chip, LP5523_REG_LED_CURRENT_BASE + led->chan_nr,
+ led_current);
+}
+
+static int lp5523_post_init_device(struct lp55xx_chip *chip)
+{
+ int ret;
+
+ ret = lp55xx_write(chip, LP5523_REG_ENABLE, LP5523_ENABLE);
+ if (ret)
+ return ret;
+
+ /* Chip startup time is 500 us, 1 - 2 ms gives some margin */
+ usleep_range(1000, 2000);
+
+ ret = lp55xx_write(chip, LP5523_REG_CONFIG,
+ LP5523_AUTO_INC | LP5523_PWR_SAVE |
+ LP5523_CP_AUTO | LP5523_AUTO_CLK |
+ LP5523_PWM_PWR_SAVE);
+ if (ret)
+ return ret;
+
+ /* turn on all leds */
+ ret = lp55xx_write(chip, LP5523_REG_ENABLE_LEDS_MSB, 0x01);
+ if (ret)
+ return ret;
+
+ ret = lp55xx_write(chip, LP5523_REG_ENABLE_LEDS_LSB, 0xff);
+ if (ret)
+ return ret;
+
+ return lp5523_init_program_engine(chip);
+}
+
+static void lp5523_load_engine(struct lp55xx_chip *chip)
+{
+ enum lp55xx_engine_index idx = chip->engine_idx;
+ static const u8 mask[] = {
+ [LP55XX_ENGINE_1] = LP5523_MODE_ENG1_M,
+ [LP55XX_ENGINE_2] = LP5523_MODE_ENG2_M,
+ [LP55XX_ENGINE_3] = LP5523_MODE_ENG3_M,
+ };
+
+ static const u8 val[] = {
+ [LP55XX_ENGINE_1] = LP5523_LOAD_ENG1,
+ [LP55XX_ENGINE_2] = LP5523_LOAD_ENG2,
+ [LP55XX_ENGINE_3] = LP5523_LOAD_ENG3,
+ };
+
+ lp55xx_update_bits(chip, LP5523_REG_OP_MODE, mask[idx], val[idx]);
+
+ lp5523_wait_opmode_done();
+}
+
+static void lp5523_load_engine_and_select_page(struct lp55xx_chip *chip)
+{
+ enum lp55xx_engine_index idx = chip->engine_idx;
+ static const u8 page_sel[] = {
+ [LP55XX_ENGINE_1] = LP5523_PAGE_ENG1,
+ [LP55XX_ENGINE_2] = LP5523_PAGE_ENG2,
+ [LP55XX_ENGINE_3] = LP5523_PAGE_ENG3,
+ };
+
+ lp5523_load_engine(chip);
+
+ lp55xx_write(chip, LP5523_REG_PROG_PAGE_SEL, page_sel[idx]);
+}
+
+static void lp5523_stop_all_engines(struct lp55xx_chip *chip)
+{
+ lp55xx_write(chip, LP5523_REG_OP_MODE, 0);
+ lp5523_wait_opmode_done();
+}
+
+static void lp5523_stop_engine(struct lp55xx_chip *chip)
+{
+ enum lp55xx_engine_index idx = chip->engine_idx;
+ static const u8 mask[] = {
+ [LP55XX_ENGINE_1] = LP5523_MODE_ENG1_M,
+ [LP55XX_ENGINE_2] = LP5523_MODE_ENG2_M,
+ [LP55XX_ENGINE_3] = LP5523_MODE_ENG3_M,
+ };
+
+ lp55xx_update_bits(chip, LP5523_REG_OP_MODE, mask[idx], 0);
+
+ lp5523_wait_opmode_done();
+}
+
+static void lp5523_turn_off_channels(struct lp55xx_chip *chip)
+{
+ int i;
+
+ for (i = 0; i < LP5523_MAX_LEDS; i++)
+ lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + i, 0);
+}
+
+static void lp5523_run_engine(struct lp55xx_chip *chip, bool start)
+{
+ int ret;
+ u8 mode;
+ u8 exec;
+
+ /* stop engine */
+ if (!start) {
+ lp5523_stop_engine(chip);
+ lp5523_turn_off_channels(chip);
+ return;
+ }
+
+ /*
+ * To run the engine,
+ * operation mode and enable register should updated at the same time
+ */
+
+ ret = lp55xx_read(chip, LP5523_REG_OP_MODE, &mode);
+ if (ret)
+ return;
+
+ ret = lp55xx_read(chip, LP5523_REG_ENABLE, &exec);
+ if (ret)
+ return;
+
+ /* change operation mode to RUN only when each engine is loading */
+ if (LP5523_ENG1_IS_LOADING(mode)) {
+ mode = (mode & ~LP5523_MODE_ENG1_M) | LP5523_RUN_ENG1;
+ exec = (exec & ~LP5523_EXEC_ENG1_M) | LP5523_RUN_ENG1;
+ }
+
+ if (LP5523_ENG2_IS_LOADING(mode)) {
+ mode = (mode & ~LP5523_MODE_ENG2_M) | LP5523_RUN_ENG2;
+ exec = (exec & ~LP5523_EXEC_ENG2_M) | LP5523_RUN_ENG2;
+ }
+
+ if (LP5523_ENG3_IS_LOADING(mode)) {
+ mode = (mode & ~LP5523_MODE_ENG3_M) | LP5523_RUN_ENG3;
+ exec = (exec & ~LP5523_EXEC_ENG3_M) | LP5523_RUN_ENG3;
+ }
+
+ lp55xx_write(chip, LP5523_REG_OP_MODE, mode);
+ lp5523_wait_opmode_done();
+
+ lp55xx_update_bits(chip, LP5523_REG_ENABLE, LP5523_EXEC_M, exec);
+}
+
+static int lp5523_init_program_engine(struct lp55xx_chip *chip)
+{
+ int i;
+ int j;
+ int ret;
+ u8 status;
+ /* one pattern per engine setting LED MUX start and stop addresses */
+ static const u8 pattern[][LP5523_PROGRAM_LENGTH] = {
+ { 0x9c, 0x30, 0x9c, 0xb0, 0x9d, 0x80, 0xd8, 0x00, 0},
+ { 0x9c, 0x40, 0x9c, 0xc0, 0x9d, 0x80, 0xd8, 0x00, 0},
+ { 0x9c, 0x50, 0x9c, 0xd0, 0x9d, 0x80, 0xd8, 0x00, 0},
+ };
+
+ /* hardcode 32 bytes of memory for each engine from program memory */
+ ret = lp55xx_write(chip, LP5523_REG_CH1_PROG_START, 0x00);
+ if (ret)
+ return ret;
+
+ ret = lp55xx_write(chip, LP5523_REG_CH2_PROG_START, 0x10);
+ if (ret)
+ return ret;
+
+ ret = lp55xx_write(chip, LP5523_REG_CH3_PROG_START, 0x20);
+ if (ret)
+ return ret;
+
+ /* write LED MUX address space for each engine */
+ for (i = LP55XX_ENGINE_1; i <= LP55XX_ENGINE_3; i++) {
+ chip->engine_idx = i;
+ lp5523_load_engine_and_select_page(chip);
+
+ for (j = 0; j < LP5523_PROGRAM_LENGTH; j++) {
+ ret = lp55xx_write(chip, LP5523_REG_PROG_MEM + j,
+ pattern[i - 1][j]);
+ if (ret)
+ goto out;
+ }
+ }
+
+ lp5523_run_engine(chip, true);
+
+ /* Let the programs run for couple of ms and check the engine status */
+ usleep_range(3000, 6000);
+ ret = lp55xx_read(chip, LP5523_REG_STATUS, &status);
+ if (ret)
+ goto out;
+ status &= LP5523_ENG_STATUS_MASK;
+
+ if (status != LP5523_ENG_STATUS_MASK) {
+ dev_err(&chip->cl->dev,
+ "could not configure LED engine, status = 0x%.2x\n",
+ status);
+ ret = -1;
+ }
+
+out:
+ lp5523_stop_all_engines(chip);
+ return ret;
+}
+
+static int lp5523_update_program_memory(struct lp55xx_chip *chip,
+ const u8 *data, size_t size)
+{
+ u8 pattern[LP5523_PROGRAM_LENGTH] = {0};
+ unsigned int cmd;
+ char c[3];
+ int nrchars;
+ int ret;
+ int offset = 0;
+ int i = 0;
+
+ while ((offset < size - 1) && (i < LP5523_PROGRAM_LENGTH)) {
+ /* separate sscanfs because length is working only for %s */
+ ret = sscanf(data + offset, "%2s%n ", c, &nrchars);
+ if (ret != 1)
+ goto err;
+
+ ret = sscanf(c, "%2x", &cmd);
+ if (ret != 1)
+ goto err;
+
+ pattern[i] = (u8)cmd;
+ offset += nrchars;
+ i++;
+ }
+
+ /* Each instruction is 16bit long. Check that length is even */
+ if (i % 2)
+ goto err;
+
+ for (i = 0; i < LP5523_PROGRAM_LENGTH; i++) {
+ ret = lp55xx_write(chip, LP5523_REG_PROG_MEM + i, pattern[i]);
+ if (ret)
+ return -EINVAL;
+ }
+
+ return size;
+
+err:
+ dev_err(&chip->cl->dev, "wrong pattern format\n");
+ return -EINVAL;
+}
+
+static void lp5523_firmware_loaded(struct lp55xx_chip *chip)
+{
+ const struct firmware *fw = chip->fw;
+
+ if (fw->size > LP5523_PROGRAM_LENGTH) {
+ dev_err(&chip->cl->dev, "firmware data size overflow: %zu\n",
+ fw->size);
+ return;
+ }
+
+ /*
+ * Program memory sequence
+ * 1) set engine mode to "LOAD"
+ * 2) write firmware data into program memory
+ */
+
+ lp5523_load_engine_and_select_page(chip);
+ lp5523_update_program_memory(chip, fw->data, fw->size);
+}
+
+static ssize_t show_engine_mode(struct device *dev,
+ struct device_attribute *attr,
+ char *buf, int nr)
+{
+ struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
+ struct lp55xx_chip *chip = led->chip;
+ enum lp55xx_engine_mode mode = chip->engines[nr - 1].mode;
+
+ switch (mode) {
+ case LP55XX_ENGINE_RUN:
+ return sprintf(buf, "run\n");
+ case LP55XX_ENGINE_LOAD:
+ return sprintf(buf, "load\n");
+ case LP55XX_ENGINE_DISABLED:
+ default:
+ return sprintf(buf, "disabled\n");
+ }
+}
+show_mode(1)
+show_mode(2)
+show_mode(3)
+
+static ssize_t store_engine_mode(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len, int nr)
+{
+ struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
+ struct lp55xx_chip *chip = led->chip;
+ struct lp55xx_engine *engine = &chip->engines[nr - 1];
+
+ mutex_lock(&chip->lock);
+
+ chip->engine_idx = nr;
+
+ if (!strncmp(buf, "run", 3)) {
+ lp5523_run_engine(chip, true);
+ engine->mode = LP55XX_ENGINE_RUN;
+ } else if (!strncmp(buf, "load", 4)) {
+ lp5523_stop_engine(chip);
+ lp5523_load_engine(chip);
+ engine->mode = LP55XX_ENGINE_LOAD;
+ } else if (!strncmp(buf, "disabled", 8)) {
+ lp5523_stop_engine(chip);
+ engine->mode = LP55XX_ENGINE_DISABLED;
+ }
+
+ mutex_unlock(&chip->lock);
+
+ return len;
+}
+store_mode(1)
+store_mode(2)
+store_mode(3)
+
+static int lp5523_mux_parse(const char *buf, u16 *mux, size_t len)
+{
+ u16 tmp_mux = 0;
+ int i;
+
+ len = min_t(int, len, LP5523_MAX_LEDS);
+
+ for (i = 0; i < len; i++) {
+ switch (buf[i]) {
+ case '1':
+ tmp_mux |= (1 << i);
+ break;
+ case '0':
+ break;
+ case '\n':
+ i = len;
+ break;
+ default:
+ return -1;
+ }
+ }
+ *mux = tmp_mux;
+
+ return 0;
+}
+
+static void lp5523_mux_to_array(u16 led_mux, char *array)
+{
+ int i, pos = 0;
+
+ for (i = 0; i < LP5523_MAX_LEDS; i++)
+ pos += sprintf(array + pos, "%x", LED_ACTIVE(led_mux, i));
+
+ array[pos] = '\0';
+}
+
+static ssize_t show_engine_leds(struct device *dev,
+ struct device_attribute *attr,
+ char *buf, int nr)
+{
+ struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
+ struct lp55xx_chip *chip = led->chip;
+ char mux[LP5523_MAX_LEDS + 1];
+
+ lp5523_mux_to_array(chip->engines[nr - 1].led_mux, mux);
+
+ return sprintf(buf, "%s\n", mux);
+}
+show_leds(1)
+show_leds(2)
+show_leds(3)
+
+static int lp5523_load_mux(struct lp55xx_chip *chip, u16 mux, int nr)
+{
+ struct lp55xx_engine *engine = &chip->engines[nr - 1];
+ int ret;
+ static const u8 mux_page[] = {
+ [LP55XX_ENGINE_1] = LP5523_PAGE_MUX1,
+ [LP55XX_ENGINE_2] = LP5523_PAGE_MUX2,
+ [LP55XX_ENGINE_3] = LP5523_PAGE_MUX3,
+ };
+
+ lp5523_load_engine(chip);
+
+ ret = lp55xx_write(chip, LP5523_REG_PROG_PAGE_SEL, mux_page[nr]);
+ if (ret)
+ return ret;
+
+ ret = lp55xx_write(chip, LP5523_REG_PROG_MEM, (u8)(mux >> 8));
+ if (ret)
+ return ret;
+
+ ret = lp55xx_write(chip, LP5523_REG_PROG_MEM + 1, (u8)(mux));
+ if (ret)
+ return ret;
+
+ engine->led_mux = mux;
+ return 0;
+}
+
+static ssize_t store_engine_leds(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len, int nr)
+{
+ struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
+ struct lp55xx_chip *chip = led->chip;
+ struct lp55xx_engine *engine = &chip->engines[nr - 1];
+ u16 mux = 0;
+ ssize_t ret;
+
+ if (lp5523_mux_parse(buf, &mux, len))
+ return -EINVAL;
+
+ mutex_lock(&chip->lock);
+
+ chip->engine_idx = nr;
+ ret = -EINVAL;
+
+ if (engine->mode != LP55XX_ENGINE_LOAD)
+ goto leave;
+
+ if (lp5523_load_mux(chip, mux, nr))
+ goto leave;
+
+ ret = len;
+leave:
+ mutex_unlock(&chip->lock);
+ return ret;
+}
+store_leds(1)
+store_leds(2)
+store_leds(3)
+
+static ssize_t store_engine_load(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len, int nr)
+{
+ struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
+ struct lp55xx_chip *chip = led->chip;
+ int ret;
+
+ mutex_lock(&chip->lock);
+
+ chip->engine_idx = nr;
+ lp5523_load_engine_and_select_page(chip);
+ ret = lp5523_update_program_memory(chip, buf, len);
+
+ mutex_unlock(&chip->lock);
+
+ return ret;
+}
+store_load(1)
+store_load(2)
+store_load(3)
+
+static ssize_t lp5523_selftest(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
+ struct lp55xx_chip *chip = led->chip;
+ struct lp55xx_platform_data *pdata = chip->pdata;
+ int i, ret, pos = 0;
+ u8 status, adc, vdd;
+
+ mutex_lock(&chip->lock);
+
+ ret = lp55xx_read(chip, LP5523_REG_STATUS, &status);
+ if (ret < 0)
+ goto fail;
+
+ /* Check that ext clock is really in use if requested */
+ if (pdata->clock_mode == LP55XX_CLOCK_EXT) {
+ if ((status & LP5523_EXT_CLK_USED) == 0)
+ goto fail;
+ }
+
+ /* Measure VDD (i.e. VBAT) first (channel 16 corresponds to VDD) */
+ lp55xx_write(chip, LP5523_REG_LED_TEST_CTRL, LP5523_EN_LEDTEST | 16);
+ usleep_range(3000, 6000); /* ADC conversion time is typically 2.7 ms */
+ ret = lp55xx_read(chip, LP5523_REG_STATUS, &status);
+ if (ret < 0)
+ goto fail;
+
+ if (!(status & LP5523_LEDTEST_DONE))
+ usleep_range(3000, 6000); /* Was not ready. Wait little bit */
+
+ ret = lp55xx_read(chip, LP5523_REG_LED_TEST_ADC, &vdd);
+ if (ret < 0)
+ goto fail;
+
+ vdd--; /* There may be some fluctuation in measurement */
+
+ for (i = 0; i < LP5523_MAX_LEDS; i++) {
+ /* Skip non-existing channels */
+ if (pdata->led_config[i].led_current == 0)
+ continue;
+
+ /* Set default current */
+ lp55xx_write(chip, LP5523_REG_LED_CURRENT_BASE + i,
+ pdata->led_config[i].led_current);
+
+ lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + i, 0xff);
+ /* let current stabilize 2 - 4ms before measurements start */
+ usleep_range(2000, 4000);
+ lp55xx_write(chip, LP5523_REG_LED_TEST_CTRL,
+ LP5523_EN_LEDTEST | i);
+ /* ADC conversion time is 2.7 ms typically */
+ usleep_range(3000, 6000);
+ ret = lp55xx_read(chip, LP5523_REG_STATUS, &status);
+ if (ret < 0)
+ goto fail;
+
+ if (!(status & LP5523_LEDTEST_DONE))
+ usleep_range(3000, 6000);/* Was not ready. Wait. */
+
+ ret = lp55xx_read(chip, LP5523_REG_LED_TEST_ADC, &adc);
+ if (ret < 0)
+ goto fail;
+
+ if (adc >= vdd || adc < LP5523_ADC_SHORTCIRC_LIM)
+ pos += sprintf(buf + pos, "LED %d FAIL\n", i);
+
+ lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + i, 0x00);
+
+ /* Restore current */
+ lp55xx_write(chip, LP5523_REG_LED_CURRENT_BASE + i,
+ led->led_current);
+ led++;
+ }
+ if (pos == 0)
+ pos = sprintf(buf, "OK\n");
+ goto release_lock;
+fail:
+ pos = sprintf(buf, "FAIL\n");
+
+release_lock:
+ mutex_unlock(&chip->lock);
+
+ return pos;
+}
+
+#define show_fader(nr) \
+static ssize_t show_master_fader##nr(struct device *dev, \
+ struct device_attribute *attr, \
+ char *buf) \
+{ \
+ return show_master_fader(dev, attr, buf, nr); \
+}
+
+#define store_fader(nr) \
+static ssize_t store_master_fader##nr(struct device *dev, \
+ struct device_attribute *attr, \
+ const char *buf, size_t len) \
+{ \
+ return store_master_fader(dev, attr, buf, len, nr); \
+}
+
+static ssize_t show_master_fader(struct device *dev,
+ struct device_attribute *attr,
+ char *buf, int nr)
+{
+ struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
+ struct lp55xx_chip *chip = led->chip;
+ int ret;
+ u8 val;
+
+ mutex_lock(&chip->lock);
+ ret = lp55xx_read(chip, LP5523_REG_MASTER_FADER_BASE + nr - 1, &val);
+ mutex_unlock(&chip->lock);
+
+ if (ret == 0)
+ ret = sprintf(buf, "%u\n", val);
+
+ return ret;
+}
+show_fader(1)
+show_fader(2)
+show_fader(3)
+
+static ssize_t store_master_fader(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len, int nr)
+{
+ struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
+ struct lp55xx_chip *chip = led->chip;
+ int ret;
+ unsigned long val;
+
+ if (kstrtoul(buf, 0, &val))
+ return -EINVAL;
+
+ if (val > 0xff)
+ return -EINVAL;
+
+ mutex_lock(&chip->lock);
+ ret = lp55xx_write(chip, LP5523_REG_MASTER_FADER_BASE + nr - 1,
+ (u8)val);
+ mutex_unlock(&chip->lock);
+
+ if (ret == 0)
+ ret = len;
+
+ return ret;
+}
+store_fader(1)
+store_fader(2)
+store_fader(3)
+
+static ssize_t show_master_fader_leds(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
+ struct lp55xx_chip *chip = led->chip;
+ int i, ret, pos = 0;
+ u8 val;
+
+ mutex_lock(&chip->lock);
+
+ for (i = 0; i < LP5523_MAX_LEDS; i++) {
+ ret = lp55xx_read(chip, LP5523_REG_LED_CTRL_BASE + i, &val);
+ if (ret)
+ goto leave;
+
+ val = (val & LP5523_FADER_MAPPING_MASK)
+ >> LP5523_FADER_MAPPING_SHIFT;
+ if (val > 3) {
+ ret = -EINVAL;
+ goto leave;
+ }
+ buf[pos++] = val + '0';
+ }
+ buf[pos++] = '\n';
+ ret = pos;
+leave:
+ mutex_unlock(&chip->lock);
+ return ret;
+}
+
+static ssize_t store_master_fader_leds(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
+ struct lp55xx_chip *chip = led->chip;
+ int i, n, ret;
+ u8 val;
+
+ n = min_t(int, len, LP5523_MAX_LEDS);
+
+ mutex_lock(&chip->lock);
+
+ for (i = 0; i < n; i++) {
+ if (buf[i] >= '0' && buf[i] <= '3') {
+ val = (buf[i] - '0') << LP5523_FADER_MAPPING_SHIFT;
+ ret = lp55xx_update_bits(chip,
+ LP5523_REG_LED_CTRL_BASE + i,
+ LP5523_FADER_MAPPING_MASK,
+ val);
+ if (ret)
+ goto leave;
+ } else {
+ ret = -EINVAL;
+ goto leave;
+ }
+ }
+ ret = len;
+leave:
+ mutex_unlock(&chip->lock);
+ return ret;
+}
+
+static int lp5523_multicolor_brightness(struct lp55xx_led *led)
+{
+ struct lp55xx_chip *chip = led->chip;
+ int ret;
+ int i;
+
+ mutex_lock(&chip->lock);
+ for (i = 0; i < led->mc_cdev.num_colors; i++) {
+ ret = lp55xx_write(chip,
+ LP5523_REG_LED_PWM_BASE +
+ led->mc_cdev.subled_info[i].channel,
+ led->mc_cdev.subled_info[i].brightness);
+ if (ret)
+ break;
+ }
+ mutex_unlock(&chip->lock);
+ return ret;
+}
+
+static int lp5523_led_brightness(struct lp55xx_led *led)
+{
+ struct lp55xx_chip *chip = led->chip;
+ int ret;
+
+ mutex_lock(&chip->lock);
+ ret = lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + led->chan_nr,
+ led->brightness);
+ mutex_unlock(&chip->lock);
+ return ret;
+}
+
+static LP55XX_DEV_ATTR_RW(engine1_mode, show_engine1_mode, store_engine1_mode);
+static LP55XX_DEV_ATTR_RW(engine2_mode, show_engine2_mode, store_engine2_mode);
+static LP55XX_DEV_ATTR_RW(engine3_mode, show_engine3_mode, store_engine3_mode);
+static LP55XX_DEV_ATTR_RW(engine1_leds, show_engine1_leds, store_engine1_leds);
+static LP55XX_DEV_ATTR_RW(engine2_leds, show_engine2_leds, store_engine2_leds);
+static LP55XX_DEV_ATTR_RW(engine3_leds, show_engine3_leds, store_engine3_leds);
+static LP55XX_DEV_ATTR_WO(engine1_load, store_engine1_load);
+static LP55XX_DEV_ATTR_WO(engine2_load, store_engine2_load);
+static LP55XX_DEV_ATTR_WO(engine3_load, store_engine3_load);
+static LP55XX_DEV_ATTR_RO(selftest, lp5523_selftest);
+static LP55XX_DEV_ATTR_RW(master_fader1, show_master_fader1,
+ store_master_fader1);
+static LP55XX_DEV_ATTR_RW(master_fader2, show_master_fader2,
+ store_master_fader2);
+static LP55XX_DEV_ATTR_RW(master_fader3, show_master_fader3,
+ store_master_fader3);
+static LP55XX_DEV_ATTR_RW(master_fader_leds, show_master_fader_leds,
+ store_master_fader_leds);
+
+static struct attribute *lp5523_attributes[] = {
+ &dev_attr_engine1_mode.attr,
+ &dev_attr_engine2_mode.attr,
+ &dev_attr_engine3_mode.attr,
+ &dev_attr_engine1_load.attr,
+ &dev_attr_engine2_load.attr,
+ &dev_attr_engine3_load.attr,
+ &dev_attr_engine1_leds.attr,
+ &dev_attr_engine2_leds.attr,
+ &dev_attr_engine3_leds.attr,
+ &dev_attr_selftest.attr,
+ &dev_attr_master_fader1.attr,
+ &dev_attr_master_fader2.attr,
+ &dev_attr_master_fader3.attr,
+ &dev_attr_master_fader_leds.attr,
+ NULL,
+};
+
+static const struct attribute_group lp5523_group = {
+ .attrs = lp5523_attributes,
+};
+
+/* Chip specific configurations */
+static struct lp55xx_device_config lp5523_cfg = {
+ .reset = {
+ .addr = LP5523_REG_RESET,
+ .val = LP5523_RESET,
+ },
+ .enable = {
+ .addr = LP5523_REG_ENABLE,
+ .val = LP5523_ENABLE,
+ },
+ .max_channel = LP5523_MAX_LEDS,
+ .post_init_device = lp5523_post_init_device,
+ .brightness_fn = lp5523_led_brightness,
+ .multicolor_brightness_fn = lp5523_multicolor_brightness,
+ .set_led_current = lp5523_set_led_current,
+ .firmware_cb = lp5523_firmware_loaded,
+ .run_engine = lp5523_run_engine,
+ .dev_attr_group = &lp5523_group,
+};
+
+static int lp5523_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int ret;
+ struct lp55xx_chip *chip;
+ struct lp55xx_led *led;
+ struct lp55xx_platform_data *pdata = dev_get_platdata(&client->dev);
+ struct device_node *np = dev_of_node(&client->dev);
+
+ chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ chip->cfg = &lp5523_cfg;
+
+ if (!pdata) {
+ if (np) {
+ pdata = lp55xx_of_populate_pdata(&client->dev, np,
+ chip);
+ if (IS_ERR(pdata))
+ return PTR_ERR(pdata);
+ } else {
+ dev_err(&client->dev, "no platform data\n");
+ return -EINVAL;
+ }
+ }
+
+ led = devm_kcalloc(&client->dev,
+ pdata->num_channels, sizeof(*led), GFP_KERNEL);
+ if (!led)
+ return -ENOMEM;
+
+ chip->cl = client;
+ chip->pdata = pdata;
+
+ mutex_init(&chip->lock);
+
+ i2c_set_clientdata(client, led);
+
+ ret = lp55xx_init_device(chip);
+ if (ret)
+ goto err_init;
+
+ dev_info(&client->dev, "%s Programmable led chip found\n", id->name);
+
+ ret = lp55xx_register_leds(led, chip);
+ if (ret)
+ goto err_out;
+
+ ret = lp55xx_register_sysfs(chip);
+ if (ret) {
+ dev_err(&client->dev, "registering sysfs failed\n");
+ goto err_out;
+ }
+
+ return 0;
+
+err_out:
+ lp55xx_deinit_device(chip);
+err_init:
+ return ret;
+}
+
+static void lp5523_remove(struct i2c_client *client)
+{
+ struct lp55xx_led *led = i2c_get_clientdata(client);
+ struct lp55xx_chip *chip = led->chip;
+
+ lp5523_stop_all_engines(chip);
+ lp55xx_unregister_sysfs(chip);
+ lp55xx_deinit_device(chip);
+}
+
+static const struct i2c_device_id lp5523_id[] = {
+ { "lp5523", LP5523 },
+ { "lp55231", LP55231 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(i2c, lp5523_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id of_lp5523_leds_match[] = {
+ { .compatible = "national,lp5523", },
+ { .compatible = "ti,lp55231", },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, of_lp5523_leds_match);
+#endif
+
+static struct i2c_driver lp5523_driver = {
+ .driver = {
+ .name = "lp5523x",
+ .of_match_table = of_match_ptr(of_lp5523_leds_match),
+ },
+ .probe = lp5523_probe,
+ .remove = lp5523_remove,
+ .id_table = lp5523_id,
+};
+
+module_i2c_driver(lp5523_driver);
+
+MODULE_AUTHOR("Mathias Nyman <mathias.nyman@nokia.com>");
+MODULE_AUTHOR("Milo Kim <milo.kim@ti.com>");
+MODULE_DESCRIPTION("LP5523 LED engine");
+MODULE_LICENSE("GPL");