diff options
Diffstat (limited to 'drivers/media/dvb-frontends/sp2.c')
| -rw-r--r-- | drivers/media/dvb-frontends/sp2.c | 429 |
1 files changed, 429 insertions, 0 deletions
diff --git a/drivers/media/dvb-frontends/sp2.c b/drivers/media/dvb-frontends/sp2.c new file mode 100644 index 000000000..27e7037e1 --- /dev/null +++ b/drivers/media/dvb-frontends/sp2.c @@ -0,0 +1,429 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * CIMaX SP2/SP2HF (Atmel T90FJR) CI driver + * + * Copyright (C) 2014 Olli Salonen <olli.salonen@iki.fi> + * + * Heavily based on CIMax2(R) SP2 driver in conjunction with NetUp Dual + * DVB-S2 CI card (cimax2) with following copyrights: + * + * Copyright (C) 2009 NetUP Inc. + * Copyright (C) 2009 Igor M. Liplianin <liplianin@netup.ru> + * Copyright (C) 2009 Abylay Ospan <aospan@netup.ru> + */ + +#include "sp2_priv.h" + +static int sp2_read_i2c(struct sp2 *s, u8 reg, u8 *buf, int len) +{ + int ret; + struct i2c_client *client = s->client; + struct i2c_adapter *adap = client->adapter; + struct i2c_msg msg[] = { + { + .addr = client->addr, + .flags = 0, + .buf = ®, + .len = 1 + }, { + .addr = client->addr, + .flags = I2C_M_RD, + .buf = buf, + .len = len + } + }; + + ret = i2c_transfer(adap, msg, 2); + + if (ret != 2) { + dev_err(&client->dev, "i2c read error, reg = 0x%02x, status = %d\n", + reg, ret); + if (ret < 0) + return ret; + else + return -EIO; + } + + dev_dbg(&s->client->dev, "addr=0x%04x, reg = 0x%02x, data = %02x\n", + client->addr, reg, buf[0]); + + return 0; +} + +static int sp2_write_i2c(struct sp2 *s, u8 reg, u8 *buf, int len) +{ + int ret; + u8 buffer[35]; + struct i2c_client *client = s->client; + struct i2c_adapter *adap = client->adapter; + struct i2c_msg msg = { + .addr = client->addr, + .flags = 0, + .buf = &buffer[0], + .len = len + 1 + }; + + if ((len + 1) > sizeof(buffer)) { + dev_err(&client->dev, "i2c wr reg=%02x: len=%d is too big!\n", + reg, len); + return -EINVAL; + } + + buffer[0] = reg; + memcpy(&buffer[1], buf, len); + + ret = i2c_transfer(adap, &msg, 1); + + if (ret != 1) { + dev_err(&client->dev, "i2c write error, reg = 0x%02x, status = %d\n", + reg, ret); + if (ret < 0) + return ret; + else + return -EIO; + } + + dev_dbg(&s->client->dev, "addr=0x%04x, reg = 0x%02x, data = %*ph\n", + client->addr, reg, len, buf); + + return 0; +} + +static int sp2_ci_op_cam(struct dvb_ca_en50221 *en50221, int slot, u8 acs, + u8 read, int addr, u8 data) +{ + struct sp2 *s = en50221->data; + u8 store; + int mem, ret; + int (*ci_op_cam)(void*, u8, int, u8, int*) = s->ci_control; + + if (slot != 0) + return -EINVAL; + + /* + * change module access type between IO space and attribute memory + * when needed + */ + if (s->module_access_type != acs) { + ret = sp2_read_i2c(s, 0x00, &store, 1); + + if (ret) + return ret; + + store &= ~(SP2_MOD_CTL_ACS1 | SP2_MOD_CTL_ACS0); + store |= acs; + + ret = sp2_write_i2c(s, 0x00, &store, 1); + if (ret) + return ret; + } + + s->module_access_type = acs; + + /* implementation of ci_op_cam is device specific */ + if (ci_op_cam) { + ret = ci_op_cam(s->priv, read, addr, data, &mem); + } else { + dev_err(&s->client->dev, "callback not defined"); + return -EINVAL; + } + + if (ret) + return ret; + + dev_dbg(&s->client->dev, "%s: slot=%d, addr=0x%04x, %s, data=%x", + (read) ? "read" : "write", slot, addr, + (acs == SP2_CI_ATTR_ACS) ? "attr" : "io", + (read) ? mem : data); + + if (read) + return mem; + else + return 0; + +} + +int sp2_ci_read_attribute_mem(struct dvb_ca_en50221 *en50221, + int slot, int addr) +{ + return sp2_ci_op_cam(en50221, slot, SP2_CI_ATTR_ACS, + SP2_CI_RD, addr, 0); +} + +int sp2_ci_write_attribute_mem(struct dvb_ca_en50221 *en50221, + int slot, int addr, u8 data) +{ + return sp2_ci_op_cam(en50221, slot, SP2_CI_ATTR_ACS, + SP2_CI_WR, addr, data); +} + +int sp2_ci_read_cam_control(struct dvb_ca_en50221 *en50221, + int slot, u8 addr) +{ + return sp2_ci_op_cam(en50221, slot, SP2_CI_IO_ACS, + SP2_CI_RD, addr, 0); +} + +int sp2_ci_write_cam_control(struct dvb_ca_en50221 *en50221, + int slot, u8 addr, u8 data) +{ + return sp2_ci_op_cam(en50221, slot, SP2_CI_IO_ACS, + SP2_CI_WR, addr, data); +} + +int sp2_ci_slot_reset(struct dvb_ca_en50221 *en50221, int slot) +{ + struct sp2 *s = en50221->data; + u8 buf; + int ret; + + dev_dbg(&s->client->dev, "slot: %d\n", slot); + + if (slot != 0) + return -EINVAL; + + /* RST on */ + buf = SP2_MOD_CTL_RST; + ret = sp2_write_i2c(s, 0x00, &buf, 1); + + if (ret) + return ret; + + usleep_range(500, 600); + + /* RST off */ + buf = 0x00; + ret = sp2_write_i2c(s, 0x00, &buf, 1); + + if (ret) + return ret; + + msleep(1000); + + return 0; +} + +int sp2_ci_slot_shutdown(struct dvb_ca_en50221 *en50221, int slot) +{ + struct sp2 *s = en50221->data; + + dev_dbg(&s->client->dev, "slot:%d\n", slot); + + /* not implemented */ + return 0; +} + +int sp2_ci_slot_ts_enable(struct dvb_ca_en50221 *en50221, int slot) +{ + struct sp2 *s = en50221->data; + u8 buf; + + dev_dbg(&s->client->dev, "slot:%d\n", slot); + + if (slot != 0) + return -EINVAL; + + sp2_read_i2c(s, 0x00, &buf, 1); + + /* disable bypass and enable TS */ + buf |= (SP2_MOD_CTL_TSOEN | SP2_MOD_CTL_TSIEN); + return sp2_write_i2c(s, 0, &buf, 1); +} + +int sp2_ci_poll_slot_status(struct dvb_ca_en50221 *en50221, + int slot, int open) +{ + struct sp2 *s = en50221->data; + u8 buf[2]; + int ret; + + dev_dbg(&s->client->dev, "slot:%d open:%d\n", slot, open); + + /* + * CAM module INSERT/REMOVE processing. Slow operation because of i2c + * transfers. Throttle read to one per sec. + */ + if (time_after(jiffies, s->next_status_checked_time)) { + ret = sp2_read_i2c(s, 0x00, buf, 1); + s->next_status_checked_time = jiffies + msecs_to_jiffies(1000); + + if (ret) + return 0; + + if (buf[0] & SP2_MOD_CTL_DET) + s->status = DVB_CA_EN50221_POLL_CAM_PRESENT | + DVB_CA_EN50221_POLL_CAM_READY; + else + s->status = 0; + } + + return s->status; +} + +static int sp2_init(struct sp2 *s) +{ + int ret = 0; + u8 buf; + u8 cimax_init[34] = { + 0x00, /* module A control*/ + 0x00, /* auto select mask high A */ + 0x00, /* auto select mask low A */ + 0x00, /* auto select pattern high A */ + 0x00, /* auto select pattern low A */ + 0x44, /* memory access time A, 600 ns */ + 0x00, /* invert input A */ + 0x00, /* RFU */ + 0x00, /* RFU */ + 0x00, /* module B control*/ + 0x00, /* auto select mask high B */ + 0x00, /* auto select mask low B */ + 0x00, /* auto select pattern high B */ + 0x00, /* auto select pattern low B */ + 0x44, /* memory access time B, 600 ns */ + 0x00, /* invert input B */ + 0x00, /* RFU */ + 0x00, /* RFU */ + 0x00, /* auto select mask high Ext */ + 0x00, /* auto select mask low Ext */ + 0x00, /* auto select pattern high Ext */ + 0x00, /* auto select pattern low Ext */ + 0x00, /* RFU */ + 0x02, /* destination - module A */ + 0x01, /* power control reg, VCC power on */ + 0x00, /* RFU */ + 0x00, /* int status read only */ + 0x00, /* Interrupt Mask Register */ + 0x05, /* EXTINT=active-high, INT=push-pull */ + 0x00, /* USCG1 */ + 0x04, /* ack active low */ + 0x00, /* LOCK = 0 */ + 0x22, /* unknown */ + 0x00, /* synchronization? */ + }; + + dev_dbg(&s->client->dev, "\n"); + + s->ca.owner = THIS_MODULE; + s->ca.read_attribute_mem = sp2_ci_read_attribute_mem; + s->ca.write_attribute_mem = sp2_ci_write_attribute_mem; + s->ca.read_cam_control = sp2_ci_read_cam_control; + s->ca.write_cam_control = sp2_ci_write_cam_control; + s->ca.slot_reset = sp2_ci_slot_reset; + s->ca.slot_shutdown = sp2_ci_slot_shutdown; + s->ca.slot_ts_enable = sp2_ci_slot_ts_enable; + s->ca.poll_slot_status = sp2_ci_poll_slot_status; + s->ca.data = s; + s->module_access_type = 0; + + /* initialize all regs */ + ret = sp2_write_i2c(s, 0x00, &cimax_init[0], 34); + if (ret) + goto err; + + /* lock registers */ + buf = 1; + ret = sp2_write_i2c(s, 0x1f, &buf, 1); + if (ret) + goto err; + + /* power on slots */ + ret = sp2_write_i2c(s, 0x18, &buf, 1); + if (ret) + goto err; + + ret = dvb_ca_en50221_init(s->dvb_adap, &s->ca, 0, 1); + if (ret) + goto err; + + return 0; + +err: + dev_dbg(&s->client->dev, "init failed=%d\n", ret); + return ret; +} + +static int sp2_exit(struct i2c_client *client) +{ + struct sp2 *s; + + dev_dbg(&client->dev, "\n"); + + if (!client) + return 0; + + s = i2c_get_clientdata(client); + if (!s) + return 0; + + if (!s->ca.data) + return 0; + + dvb_ca_en50221_release(&s->ca); + + return 0; +} + +static int sp2_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct sp2_config *cfg = client->dev.platform_data; + struct sp2 *s; + int ret; + + dev_dbg(&client->dev, "\n"); + + s = kzalloc(sizeof(*s), GFP_KERNEL); + if (!s) { + ret = -ENOMEM; + goto err; + } + + s->client = client; + s->dvb_adap = cfg->dvb_adap; + s->priv = cfg->priv; + s->ci_control = cfg->ci_control; + + i2c_set_clientdata(client, s); + + ret = sp2_init(s); + if (ret) + goto err; + + dev_info(&s->client->dev, "CIMaX SP2 successfully attached\n"); + return 0; +err: + dev_dbg(&client->dev, "init failed=%d\n", ret); + kfree(s); + + return ret; +} + +static void sp2_remove(struct i2c_client *client) +{ + struct sp2 *s = i2c_get_clientdata(client); + + dev_dbg(&client->dev, "\n"); + sp2_exit(client); + kfree(s); +} + +static const struct i2c_device_id sp2_id[] = { + {"sp2", 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, sp2_id); + +static struct i2c_driver sp2_driver = { + .driver = { + .name = "sp2", + }, + .probe = sp2_probe, + .remove = sp2_remove, + .id_table = sp2_id, +}; + +module_i2c_driver(sp2_driver); + +MODULE_DESCRIPTION("CIMaX SP2/HF CI driver"); +MODULE_AUTHOR("Olli Salonen <olli.salonen@iki.fi>"); +MODULE_LICENSE("GPL"); |