diff options
Diffstat (limited to 'drivers/media/i2c/ov5640.c')
| -rw-r--r-- | drivers/media/i2c/ov5640.c | 3992 |
1 files changed, 3992 insertions, 0 deletions
diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c new file mode 100644 index 000000000..e0019668a --- /dev/null +++ b/drivers/media/i2c/ov5640.c @@ -0,0 +1,3992 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2011-2013 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2014-2017 Mentor Graphics Inc. + */ + +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/clkdev.h> +#include <linux/ctype.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/pm_runtime.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> +#include <linux/types.h> +#include <media/v4l2-async.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-device.h> +#include <media/v4l2-event.h> +#include <media/v4l2-fwnode.h> +#include <media/v4l2-subdev.h> + +/* min/typical/max system clock (xclk) frequencies */ +#define OV5640_XCLK_MIN 6000000 +#define OV5640_XCLK_MAX 54000000 + +#define OV5640_NATIVE_WIDTH 2624 +#define OV5640_NATIVE_HEIGHT 1964 +#define OV5640_PIXEL_ARRAY_TOP 14 +#define OV5640_PIXEL_ARRAY_LEFT 16 +#define OV5640_PIXEL_ARRAY_WIDTH 2592 +#define OV5640_PIXEL_ARRAY_HEIGHT 1944 + +/* FIXME: not documented. */ +#define OV5640_MIN_VBLANK 24 +#define OV5640_MAX_VTS 3375 + +#define OV5640_DEFAULT_SLAVE_ID 0x3c + +#define OV5640_LINK_RATE_MAX 490000000U + +#define OV5640_REG_SYS_RESET02 0x3002 +#define OV5640_REG_SYS_CLOCK_ENABLE02 0x3006 +#define OV5640_REG_SYS_CTRL0 0x3008 +#define OV5640_REG_SYS_CTRL0_SW_PWDN 0x42 +#define OV5640_REG_SYS_CTRL0_SW_PWUP 0x02 +#define OV5640_REG_SYS_CTRL0_SW_RST 0x82 +#define OV5640_REG_CHIP_ID 0x300a +#define OV5640_REG_IO_MIPI_CTRL00 0x300e +#define OV5640_REG_PAD_OUTPUT_ENABLE01 0x3017 +#define OV5640_REG_PAD_OUTPUT_ENABLE02 0x3018 +#define OV5640_REG_PAD_OUTPUT00 0x3019 +#define OV5640_REG_SYSTEM_CONTROL1 0x302e +#define OV5640_REG_SC_PLL_CTRL0 0x3034 +#define OV5640_REG_SC_PLL_CTRL1 0x3035 +#define OV5640_REG_SC_PLL_CTRL2 0x3036 +#define OV5640_REG_SC_PLL_CTRL3 0x3037 +#define OV5640_REG_SLAVE_ID 0x3100 +#define OV5640_REG_SCCB_SYS_CTRL1 0x3103 +#define OV5640_REG_SYS_ROOT_DIVIDER 0x3108 +#define OV5640_REG_AWB_R_GAIN 0x3400 +#define OV5640_REG_AWB_G_GAIN 0x3402 +#define OV5640_REG_AWB_B_GAIN 0x3404 +#define OV5640_REG_AWB_MANUAL_CTRL 0x3406 +#define OV5640_REG_AEC_PK_EXPOSURE_HI 0x3500 +#define OV5640_REG_AEC_PK_EXPOSURE_MED 0x3501 +#define OV5640_REG_AEC_PK_EXPOSURE_LO 0x3502 +#define OV5640_REG_AEC_PK_MANUAL 0x3503 +#define OV5640_REG_AEC_PK_REAL_GAIN 0x350a +#define OV5640_REG_AEC_PK_VTS 0x350c +#define OV5640_REG_TIMING_HS 0x3800 +#define OV5640_REG_TIMING_VS 0x3802 +#define OV5640_REG_TIMING_HW 0x3804 +#define OV5640_REG_TIMING_VH 0x3806 +#define OV5640_REG_TIMING_DVPHO 0x3808 +#define OV5640_REG_TIMING_DVPVO 0x380a +#define OV5640_REG_TIMING_HTS 0x380c +#define OV5640_REG_TIMING_VTS 0x380e +#define OV5640_REG_TIMING_HOFFS 0x3810 +#define OV5640_REG_TIMING_VOFFS 0x3812 +#define OV5640_REG_TIMING_TC_REG20 0x3820 +#define OV5640_REG_TIMING_TC_REG21 0x3821 +#define OV5640_REG_AEC_CTRL00 0x3a00 +#define OV5640_REG_AEC_B50_STEP 0x3a08 +#define OV5640_REG_AEC_B60_STEP 0x3a0a +#define OV5640_REG_AEC_CTRL0D 0x3a0d +#define OV5640_REG_AEC_CTRL0E 0x3a0e +#define OV5640_REG_AEC_CTRL0F 0x3a0f +#define OV5640_REG_AEC_CTRL10 0x3a10 +#define OV5640_REG_AEC_CTRL11 0x3a11 +#define OV5640_REG_AEC_CTRL1B 0x3a1b +#define OV5640_REG_AEC_CTRL1E 0x3a1e +#define OV5640_REG_AEC_CTRL1F 0x3a1f +#define OV5640_REG_HZ5060_CTRL00 0x3c00 +#define OV5640_REG_HZ5060_CTRL01 0x3c01 +#define OV5640_REG_SIGMADELTA_CTRL0C 0x3c0c +#define OV5640_REG_FRAME_CTRL01 0x4202 +#define OV5640_REG_FORMAT_CONTROL00 0x4300 +#define OV5640_REG_VFIFO_HSIZE 0x4602 +#define OV5640_REG_VFIFO_VSIZE 0x4604 +#define OV5640_REG_JPG_MODE_SELECT 0x4713 +#define OV5640_REG_CCIR656_CTRL00 0x4730 +#define OV5640_REG_POLARITY_CTRL00 0x4740 +#define OV5640_REG_MIPI_CTRL00 0x4800 +#define OV5640_REG_DEBUG_MODE 0x4814 +#define OV5640_REG_PCLK_PERIOD 0x4837 +#define OV5640_REG_ISP_FORMAT_MUX_CTRL 0x501f +#define OV5640_REG_PRE_ISP_TEST_SET1 0x503d +#define OV5640_REG_SDE_CTRL0 0x5580 +#define OV5640_REG_SDE_CTRL1 0x5581 +#define OV5640_REG_SDE_CTRL3 0x5583 +#define OV5640_REG_SDE_CTRL4 0x5584 +#define OV5640_REG_SDE_CTRL5 0x5585 +#define OV5640_REG_AVG_READOUT 0x56a1 + +enum ov5640_mode_id { + OV5640_MODE_QQVGA_160_120 = 0, + OV5640_MODE_QCIF_176_144, + OV5640_MODE_QVGA_320_240, + OV5640_MODE_VGA_640_480, + OV5640_MODE_NTSC_720_480, + OV5640_MODE_PAL_720_576, + OV5640_MODE_XGA_1024_768, + OV5640_MODE_720P_1280_720, + OV5640_MODE_1080P_1920_1080, + OV5640_MODE_QSXGA_2592_1944, + OV5640_NUM_MODES, +}; + +enum ov5640_frame_rate { + OV5640_15_FPS = 0, + OV5640_30_FPS, + OV5640_60_FPS, + OV5640_NUM_FRAMERATES, +}; + +enum ov5640_pixel_rate_id { + OV5640_PIXEL_RATE_168M, + OV5640_PIXEL_RATE_148M, + OV5640_PIXEL_RATE_124M, + OV5640_PIXEL_RATE_96M, + OV5640_PIXEL_RATE_48M, + OV5640_NUM_PIXEL_RATES, +}; + +/* + * The chip manual suggests 24/48/96/192 MHz pixel clocks. + * + * 192MHz exceeds the sysclk limits; use 168MHz as maximum pixel rate for + * full resolution mode @15 FPS. + */ +static const u32 ov5640_pixel_rates[] = { + [OV5640_PIXEL_RATE_168M] = 168000000, + [OV5640_PIXEL_RATE_148M] = 148000000, + [OV5640_PIXEL_RATE_124M] = 124000000, + [OV5640_PIXEL_RATE_96M] = 96000000, + [OV5640_PIXEL_RATE_48M] = 48000000, +}; + +/* + * MIPI CSI-2 link frequencies. + * + * Derived from the above defined pixel rate for bpp = (8, 16, 24) and + * data_lanes = (1, 2) + * + * link_freq = (pixel_rate * bpp) / (2 * data_lanes) + */ +static const s64 ov5640_csi2_link_freqs[] = { + 992000000, 888000000, 768000000, 744000000, 672000000, 672000000, + 592000000, 592000000, 576000000, 576000000, 496000000, 496000000, + 384000000, 384000000, 384000000, 336000000, 296000000, 288000000, + 248000000, 192000000, 192000000, 192000000, 96000000, +}; + +/* Link freq for default mode: UYVY 16 bpp, 2 data lanes. */ +#define OV5640_DEFAULT_LINK_FREQ 13 + +enum ov5640_format_mux { + OV5640_FMT_MUX_YUV422 = 0, + OV5640_FMT_MUX_RGB, + OV5640_FMT_MUX_DITHER, + OV5640_FMT_MUX_RAW_DPC, + OV5640_FMT_MUX_SNR_RAW, + OV5640_FMT_MUX_RAW_CIP, +}; + +struct ov5640_pixfmt { + u32 code; + u32 colorspace; + u8 bpp; + u8 ctrl00; + enum ov5640_format_mux mux; +}; + +static const struct ov5640_pixfmt ov5640_dvp_formats[] = { + { + /* YUV422, YUYV */ + .code = MEDIA_BUS_FMT_JPEG_1X8, + .colorspace = V4L2_COLORSPACE_JPEG, + .bpp = 16, + .ctrl00 = 0x30, + .mux = OV5640_FMT_MUX_YUV422, + }, { + /* YUV422, UYVY */ + .code = MEDIA_BUS_FMT_UYVY8_2X8, + .colorspace = V4L2_COLORSPACE_SRGB, + .bpp = 16, + .ctrl00 = 0x3f, + .mux = OV5640_FMT_MUX_YUV422, + }, { + /* YUV422, YUYV */ + .code = MEDIA_BUS_FMT_YUYV8_2X8, + .colorspace = V4L2_COLORSPACE_SRGB, + .bpp = 16, + .ctrl00 = 0x30, + .mux = OV5640_FMT_MUX_YUV422, + }, { + /* RGB565 {g[2:0],b[4:0]},{r[4:0],g[5:3]} */ + .code = MEDIA_BUS_FMT_RGB565_2X8_LE, + .colorspace = V4L2_COLORSPACE_SRGB, + .bpp = 16, + .ctrl00 = 0x6f, + .mux = OV5640_FMT_MUX_RGB, + }, { + /* RGB565 {r[4:0],g[5:3]},{g[2:0],b[4:0]} */ + .code = MEDIA_BUS_FMT_RGB565_2X8_BE, + .colorspace = V4L2_COLORSPACE_SRGB, + .bpp = 16, + .ctrl00 = 0x61, + .mux = OV5640_FMT_MUX_RGB, + }, { + /* Raw, BGBG... / GRGR... */ + .code = MEDIA_BUS_FMT_SBGGR8_1X8, + .colorspace = V4L2_COLORSPACE_SRGB, + .bpp = 8, + .ctrl00 = 0x00, + .mux = OV5640_FMT_MUX_RAW_DPC, + }, { + /* Raw bayer, GBGB... / RGRG... */ + .code = MEDIA_BUS_FMT_SGBRG8_1X8, + .colorspace = V4L2_COLORSPACE_SRGB, + .bpp = 8, + .ctrl00 = 0x01, + .mux = OV5640_FMT_MUX_RAW_DPC, + }, { + /* Raw bayer, GRGR... / BGBG... */ + .code = MEDIA_BUS_FMT_SGRBG8_1X8, + .colorspace = V4L2_COLORSPACE_SRGB, + .bpp = 8, + .ctrl00 = 0x02, + .mux = OV5640_FMT_MUX_RAW_DPC, + }, { + /* Raw bayer, RGRG... / GBGB... */ + .code = MEDIA_BUS_FMT_SRGGB8_1X8, + .colorspace = V4L2_COLORSPACE_SRGB, + .bpp = 8, + .ctrl00 = 0x03, + .mux = OV5640_FMT_MUX_RAW_DPC, + }, + { /* sentinel */ } +}; + +static const struct ov5640_pixfmt ov5640_csi2_formats[] = { + { + /* YUV422, YUYV */ + .code = MEDIA_BUS_FMT_JPEG_1X8, + .colorspace = V4L2_COLORSPACE_JPEG, + .bpp = 16, + .ctrl00 = 0x30, + .mux = OV5640_FMT_MUX_YUV422, + }, { + /* YUV422, UYVY */ + .code = MEDIA_BUS_FMT_UYVY8_1X16, + .colorspace = V4L2_COLORSPACE_SRGB, + .bpp = 16, + .ctrl00 = 0x3f, + .mux = OV5640_FMT_MUX_YUV422, + }, { + /* YUV422, YUYV */ + .code = MEDIA_BUS_FMT_YUYV8_1X16, + .colorspace = V4L2_COLORSPACE_SRGB, + .bpp = 16, + .ctrl00 = 0x30, + .mux = OV5640_FMT_MUX_YUV422, + }, { + /* RGB565 {g[2:0],b[4:0]},{r[4:0],g[5:3]} */ + .code = MEDIA_BUS_FMT_RGB565_1X16, + .colorspace = V4L2_COLORSPACE_SRGB, + .bpp = 16, + .ctrl00 = 0x6f, + .mux = OV5640_FMT_MUX_RGB, + }, { + /* BGR888: RGB */ + .code = MEDIA_BUS_FMT_BGR888_1X24, + .colorspace = V4L2_COLORSPACE_SRGB, + .bpp = 24, + .ctrl00 = 0x23, + .mux = OV5640_FMT_MUX_RGB, + }, { + /* Raw, BGBG... / GRGR... */ + .code = MEDIA_BUS_FMT_SBGGR8_1X8, + .colorspace = V4L2_COLORSPACE_SRGB, + .bpp = 8, + .ctrl00 = 0x00, + .mux = OV5640_FMT_MUX_RAW_DPC, + }, { + /* Raw bayer, GBGB... / RGRG... */ + .code = MEDIA_BUS_FMT_SGBRG8_1X8, + .colorspace = V4L2_COLORSPACE_SRGB, + .bpp = 8, + .ctrl00 = 0x01, + .mux = OV5640_FMT_MUX_RAW_DPC, + }, { + /* Raw bayer, GRGR... / BGBG... */ + .code = MEDIA_BUS_FMT_SGRBG8_1X8, + .colorspace = V4L2_COLORSPACE_SRGB, + .bpp = 8, + .ctrl00 = 0x02, + .mux = OV5640_FMT_MUX_RAW_DPC, + }, { + /* Raw bayer, RGRG... / GBGB... */ + .code = MEDIA_BUS_FMT_SRGGB8_1X8, + .colorspace = V4L2_COLORSPACE_SRGB, + .bpp = 8, + .ctrl00 = 0x03, + .mux = OV5640_FMT_MUX_RAW_DPC, + }, + { /* sentinel */ } +}; + +/* + * FIXME: remove this when a subdev API becomes available + * to set the MIPI CSI-2 virtual channel. + */ +static unsigned int virtual_channel; +module_param(virtual_channel, uint, 0444); +MODULE_PARM_DESC(virtual_channel, + "MIPI CSI-2 virtual channel (0..3), default 0"); + +static const int ov5640_framerates[] = { + [OV5640_15_FPS] = 15, + [OV5640_30_FPS] = 30, + [OV5640_60_FPS] = 60, +}; + +/* regulator supplies */ +static const char * const ov5640_supply_name[] = { + "DOVDD", /* Digital I/O (1.8V) supply */ + "AVDD", /* Analog (2.8V) supply */ + "DVDD", /* Digital Core (1.5V) supply */ +}; + +#define OV5640_NUM_SUPPLIES ARRAY_SIZE(ov5640_supply_name) + +/* + * Image size under 1280 * 960 are SUBSAMPLING + * Image size upper 1280 * 960 are SCALING + */ +enum ov5640_downsize_mode { + SUBSAMPLING, + SCALING, +}; + +struct reg_value { + u16 reg_addr; + u8 val; + u8 mask; + u32 delay_ms; +}; + +struct ov5640_timings { + /* Analog crop rectangle. */ + struct v4l2_rect analog_crop; + /* Visibile crop: from analog crop top-left corner. */ + struct v4l2_rect crop; + /* Total pixels per line: width + fixed hblank. */ + u32 htot; + /* Default vertical blanking: frame height = height + vblank. */ + u32 vblank_def; +}; + +struct ov5640_mode_info { + enum ov5640_mode_id id; + enum ov5640_downsize_mode dn_mode; + enum ov5640_pixel_rate_id pixel_rate; + + unsigned int width; + unsigned int height; + + struct ov5640_timings dvp_timings; + struct ov5640_timings csi2_timings; + + const struct reg_value *reg_data; + u32 reg_data_size; + + /* Used by s_frame_interval only. */ + u32 max_fps; + u32 def_fps; +}; + +struct ov5640_ctrls { + struct v4l2_ctrl_handler handler; + struct v4l2_ctrl *pixel_rate; + struct v4l2_ctrl *link_freq; + struct v4l2_ctrl *hblank; + struct v4l2_ctrl *vblank; + struct { + struct v4l2_ctrl *auto_exp; + struct v4l2_ctrl *exposure; + }; + struct { + struct v4l2_ctrl *auto_wb; + struct v4l2_ctrl *blue_balance; + struct v4l2_ctrl *red_balance; + }; + struct { + struct v4l2_ctrl *auto_gain; + struct v4l2_ctrl *gain; + }; + struct v4l2_ctrl *brightness; + struct v4l2_ctrl *light_freq; + struct v4l2_ctrl *saturation; + struct v4l2_ctrl *contrast; + struct v4l2_ctrl *hue; + struct v4l2_ctrl *test_pattern; + struct v4l2_ctrl *hflip; + struct v4l2_ctrl *vflip; +}; + +struct ov5640_dev { + struct i2c_client *i2c_client; + struct v4l2_subdev sd; + struct media_pad pad; + struct v4l2_fwnode_endpoint ep; /* the parsed DT endpoint info */ + struct clk *xclk; /* system clock to OV5640 */ + u32 xclk_freq; + + struct regulator_bulk_data supplies[OV5640_NUM_SUPPLIES]; + struct gpio_desc *reset_gpio; + struct gpio_desc *pwdn_gpio; + bool upside_down; + + /* lock to protect all members below */ + struct mutex lock; + + struct v4l2_mbus_framefmt fmt; + bool pending_fmt_change; + + const struct ov5640_mode_info *current_mode; + const struct ov5640_mode_info *last_mode; + enum ov5640_frame_rate current_fr; + struct v4l2_fract frame_interval; + s64 current_link_freq; + + struct ov5640_ctrls ctrls; + + u32 prev_sysclk, prev_hts; + u32 ae_low, ae_high, ae_target; + + bool pending_mode_change; + bool streaming; +}; + +static inline struct ov5640_dev *to_ov5640_dev(struct v4l2_subdev *sd) +{ + return container_of(sd, struct ov5640_dev, sd); +} + +static inline struct v4l2_subdev *ctrl_to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct ov5640_dev, + ctrls.handler)->sd; +} + +static inline bool ov5640_is_csi2(const struct ov5640_dev *sensor) +{ + return sensor->ep.bus_type == V4L2_MBUS_CSI2_DPHY; +} + +static inline const struct ov5640_pixfmt * +ov5640_formats(struct ov5640_dev *sensor) +{ + return ov5640_is_csi2(sensor) ? ov5640_csi2_formats + : ov5640_dvp_formats; +} + +static const struct ov5640_pixfmt * +ov5640_code_to_pixfmt(struct ov5640_dev *sensor, u32 code) +{ + const struct ov5640_pixfmt *formats = ov5640_formats(sensor); + unsigned int i; + + for (i = 0; formats[i].code; ++i) { + if (formats[i].code == code) + return &formats[i]; + } + + return &formats[0]; +} + +static u32 ov5640_code_to_bpp(struct ov5640_dev *sensor, u32 code) +{ + const struct ov5640_pixfmt *format = ov5640_code_to_pixfmt(sensor, + code); + + return format->bpp; +} + +/* + * FIXME: all of these register tables are likely filled with + * entries that set the register to their power-on default values, + * and which are otherwise not touched by this driver. Those entries + * should be identified and removed to speed register load time + * over i2c. + */ +/* YUV422 UYVY VGA@30fps */ + +static const struct v4l2_mbus_framefmt ov5640_default_fmt = { + .code = MEDIA_BUS_FMT_UYVY8_2X8, + .width = 640, + .height = 480, + .colorspace = V4L2_COLORSPACE_SRGB, + .ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(V4L2_COLORSPACE_SRGB), + .quantization = V4L2_QUANTIZATION_FULL_RANGE, + .xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(V4L2_COLORSPACE_SRGB), + .field = V4L2_FIELD_NONE, +}; + +static const struct reg_value ov5640_init_setting[] = { + {0x3103, 0x11, 0, 0}, + {0x3103, 0x03, 0, 0}, {0x3630, 0x36, 0, 0}, + {0x3631, 0x0e, 0, 0}, {0x3632, 0xe2, 0, 0}, {0x3633, 0x12, 0, 0}, + {0x3621, 0xe0, 0, 0}, {0x3704, 0xa0, 0, 0}, {0x3703, 0x5a, 0, 0}, + {0x3715, 0x78, 0, 0}, {0x3717, 0x01, 0, 0}, {0x370b, 0x60, 0, 0}, + {0x3705, 0x1a, 0, 0}, {0x3905, 0x02, 0, 0}, {0x3906, 0x10, 0, 0}, + {0x3901, 0x0a, 0, 0}, {0x3731, 0x12, 0, 0}, {0x3600, 0x08, 0, 0}, + {0x3601, 0x33, 0, 0}, {0x302d, 0x60, 0, 0}, {0x3620, 0x52, 0, 0}, + {0x371b, 0x20, 0, 0}, {0x471c, 0x50, 0, 0}, {0x3a13, 0x43, 0, 0}, + {0x3a18, 0x00, 0, 0}, {0x3a19, 0xf8, 0, 0}, {0x3635, 0x13, 0, 0}, + {0x3636, 0x03, 0, 0}, {0x3634, 0x40, 0, 0}, {0x3622, 0x01, 0, 0}, + {0x3c01, 0xa4, 0, 0}, {0x3c04, 0x28, 0, 0}, {0x3c05, 0x98, 0, 0}, + {0x3c06, 0x00, 0, 0}, {0x3c07, 0x08, 0, 0}, {0x3c08, 0x00, 0, 0}, + {0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0}, + {0x3820, 0x41, 0, 0}, {0x3821, 0x07, 0, 0}, {0x3814, 0x31, 0, 0}, + {0x3815, 0x31, 0, 0}, + {0x3618, 0x00, 0, 0}, {0x3612, 0x29, 0, 0}, {0x3708, 0x64, 0, 0}, + {0x3709, 0x52, 0, 0}, {0x370c, 0x03, 0, 0}, {0x3a02, 0x03, 0, 0}, + {0x3a03, 0xd8, 0, 0}, {0x3a08, 0x01, 0, 0}, {0x3a09, 0x27, 0, 0}, + {0x3a0a, 0x00, 0, 0}, {0x3a0b, 0xf6, 0, 0}, {0x3a0e, 0x03, 0, 0}, + {0x3a0d, 0x04, 0, 0}, {0x3a14, 0x03, 0, 0}, {0x3a15, 0xd8, 0, 0}, + {0x4001, 0x02, 0, 0}, {0x4004, 0x02, 0, 0}, {0x3000, 0x00, 0, 0}, + {0x3002, 0x1c, 0, 0}, {0x3004, 0xff, 0, 0}, {0x3006, 0xc3, 0, 0}, + {0x302e, 0x08, 0, 0}, {0x4300, 0x3f, 0, 0}, + {0x501f, 0x00, 0, 0}, {0x440e, 0x00, 0, 0}, {0x4837, 0x0a, 0, 0}, + {0x5000, 0xa7, 0, 0}, {0x5001, 0xa3, 0, 0}, {0x5180, 0xff, 0, 0}, + {0x5181, 0xf2, 0, 0}, {0x5182, 0x00, 0, 0}, {0x5183, 0x14, 0, 0}, + {0x5184, 0x25, 0, 0}, {0x5185, 0x24, 0, 0}, {0x5186, 0x09, 0, 0}, + {0x5187, 0x09, 0, 0}, {0x5188, 0x09, 0, 0}, {0x5189, 0x88, 0, 0}, + {0x518a, 0x54, 0, 0}, {0x518b, 0xee, 0, 0}, {0x518c, 0xb2, 0, 0}, + {0x518d, 0x50, 0, 0}, {0x518e, 0x34, 0, 0}, {0x518f, 0x6b, 0, 0}, + {0x5190, 0x46, 0, 0}, {0x5191, 0xf8, 0, 0}, {0x5192, 0x04, 0, 0}, + {0x5193, 0x70, 0, 0}, {0x5194, 0xf0, 0, 0}, {0x5195, 0xf0, 0, 0}, + {0x5196, 0x03, 0, 0}, {0x5197, 0x01, 0, 0}, {0x5198, 0x04, 0, 0}, + {0x5199, 0x6c, 0, 0}, {0x519a, 0x04, 0, 0}, {0x519b, 0x00, 0, 0}, + {0x519c, 0x09, 0, 0}, {0x519d, 0x2b, 0, 0}, {0x519e, 0x38, 0, 0}, + {0x5381, 0x1e, 0, 0}, {0x5382, 0x5b, 0, 0}, {0x5383, 0x08, 0, 0}, + {0x5384, 0x0a, 0, 0}, {0x5385, 0x7e, 0, 0}, {0x5386, 0x88, 0, 0}, + {0x5387, 0x7c, 0, 0}, {0x5388, 0x6c, 0, 0}, {0x5389, 0x10, 0, 0}, + {0x538a, 0x01, 0, 0}, {0x538b, 0x98, 0, 0}, {0x5300, 0x08, 0, 0}, + {0x5301, 0x30, 0, 0}, {0x5302, 0x10, 0, 0}, {0x5303, 0x00, 0, 0}, + {0x5304, 0x08, 0, 0}, {0x5305, 0x30, 0, 0}, {0x5306, 0x08, 0, 0}, + {0x5307, 0x16, 0, 0}, {0x5309, 0x08, 0, 0}, {0x530a, 0x30, 0, 0}, + {0x530b, 0x04, 0, 0}, {0x530c, 0x06, 0, 0}, {0x5480, 0x01, 0, 0}, + {0x5481, 0x08, 0, 0}, {0x5482, 0x14, 0, 0}, {0x5483, 0x28, 0, 0}, + {0x5484, 0x51, 0, 0}, {0x5485, 0x65, 0, 0}, {0x5486, 0x71, 0, 0}, + {0x5487, 0x7d, 0, 0}, {0x5488, 0x87, 0, 0}, {0x5489, 0x91, 0, 0}, + {0x548a, 0x9a, 0, 0}, {0x548b, 0xaa, 0, 0}, {0x548c, 0xb8, 0, 0}, + {0x548d, 0xcd, 0, 0}, {0x548e, 0xdd, 0, 0}, {0x548f, 0xea, 0, 0}, + {0x5490, 0x1d, 0, 0}, {0x5580, 0x02, 0, 0}, {0x5583, 0x40, 0, 0}, + {0x5584, 0x10, 0, 0}, {0x5589, 0x10, 0, 0}, {0x558a, 0x00, 0, 0}, + {0x558b, 0xf8, 0, 0}, {0x5800, 0x23, 0, 0}, {0x5801, 0x14, 0, 0}, + {0x5802, 0x0f, 0, 0}, {0x5803, 0x0f, 0, 0}, {0x5804, 0x12, 0, 0}, + {0x5805, 0x26, 0, 0}, {0x5806, 0x0c, 0, 0}, {0x5807, 0x08, 0, 0}, + {0x5808, 0x05, 0, 0}, {0x5809, 0x05, 0, 0}, {0x580a, 0x08, 0, 0}, + {0x580b, 0x0d, 0, 0}, {0x580c, 0x08, 0, 0}, {0x580d, 0x03, 0, 0}, + {0x580e, 0x00, 0, 0}, {0x580f, 0x00, 0, 0}, {0x5810, 0x03, 0, 0}, + {0x5811, 0x09, 0, 0}, {0x5812, 0x07, 0, 0}, {0x5813, 0x03, 0, 0}, + {0x5814, 0x00, 0, 0}, {0x5815, 0x01, 0, 0}, {0x5816, 0x03, 0, 0}, + {0x5817, 0x08, 0, 0}, {0x5818, 0x0d, 0, 0}, {0x5819, 0x08, 0, 0}, + {0x581a, 0x05, 0, 0}, {0x581b, 0x06, 0, 0}, {0x581c, 0x08, 0, 0}, + {0x581d, 0x0e, 0, 0}, {0x581e, 0x29, 0, 0}, {0x581f, 0x17, 0, 0}, + {0x5820, 0x11, 0, 0}, {0x5821, 0x11, 0, 0}, {0x5822, 0x15, 0, 0}, + {0x5823, 0x28, 0, 0}, {0x5824, 0x46, 0, 0}, {0x5825, 0x26, 0, 0}, + {0x5826, 0x08, 0, 0}, {0x5827, 0x26, 0, 0}, {0x5828, 0x64, 0, 0}, + {0x5829, 0x26, 0, 0}, {0x582a, 0x24, 0, 0}, {0x582b, 0x22, 0, 0}, + {0x582c, 0x24, 0, 0}, {0x582d, 0x24, 0, 0}, {0x582e, 0x06, 0, 0}, + {0x582f, 0x22, 0, 0}, {0x5830, 0x40, 0, 0}, {0x5831, 0x42, 0, 0}, + {0x5832, 0x24, 0, 0}, {0x5833, 0x26, 0, 0}, {0x5834, 0x24, 0, 0}, + {0x5835, 0x22, 0, 0}, {0x5836, 0x22, 0, 0}, {0x5837, 0x26, 0, 0}, + {0x5838, 0x44, 0, 0}, {0x5839, 0x24, 0, 0}, {0x583a, 0x26, 0, 0}, + {0x583b, 0x28, 0, 0}, {0x583c, 0x42, 0, 0}, {0x583d, 0xce, 0, 0}, + {0x5025, 0x00, 0, 0}, {0x3a0f, 0x30, 0, 0}, {0x3a10, 0x28, 0, 0}, + {0x3a1b, 0x30, 0, 0}, {0x3a1e, 0x26, 0, 0}, {0x3a11, 0x60, 0, 0}, + {0x3a1f, 0x14, 0, 0}, {0x3008, 0x02, 0, 0}, {0x3c00, 0x04, 0, 300}, +}; + +static const struct reg_value ov5640_setting_low_res[] = { + {0x3c07, 0x08, 0, 0}, + {0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0}, + {0x3814, 0x31, 0, 0}, + {0x3815, 0x31, 0, 0}, + {0x3618, 0x00, 0, 0}, {0x3612, 0x29, 0, 0}, {0x3708, 0x64, 0, 0}, + {0x3709, 0x52, 0, 0}, {0x370c, 0x03, 0, 0}, {0x3a02, 0x03, 0, 0}, + {0x3a03, 0xd8, 0, 0}, {0x3a08, 0x01, 0, 0}, {0x3a09, 0x27, 0, 0}, + {0x3a0a, 0x00, 0, 0}, {0x3a0b, 0xf6, 0, 0}, {0x3a0e, 0x03, 0, 0}, + {0x3a0d, 0x04, 0, 0}, {0x3a14, 0x03, 0, 0}, {0x3a15, 0xd8, 0, 0}, + {0x4001, 0x02, 0, 0}, {0x4004, 0x02, 0, 0}, + {0x4407, 0x04, 0, 0}, {0x460b, 0x35, 0, 0}, {0x460c, 0x22, 0, 0}, + {0x3824, 0x02, 0, 0}, {0x5001, 0xa3, 0, 0}, +}; + +static const struct reg_value ov5640_setting_720P_1280_720[] = { + {0x3c07, 0x07, 0, 0}, + {0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0}, + {0x3814, 0x31, 0, 0}, + {0x3815, 0x31, 0, 0}, + {0x3618, 0x00, 0, 0}, {0x3612, 0x29, 0, 0}, {0x3708, 0x64, 0, 0}, + {0x3709, 0x52, 0, 0}, {0x370c, 0x03, 0, 0}, {0x3a02, 0x02, 0, 0}, + {0x3a03, 0xe4, 0, 0}, {0x3a08, 0x01, 0, 0}, {0x3a09, 0xbc, 0, 0}, + {0x3a0a, 0x01, 0, 0}, {0x3a0b, 0x72, 0, 0}, {0x3a0e, 0x01, 0, 0}, + {0x3a0d, 0x02, 0, 0}, {0x3a14, 0x02, 0, 0}, {0x3a15, 0xe4, 0, 0}, + {0x4001, 0x02, 0, 0}, {0x4004, 0x02, 0, 0}, + {0x4407, 0x04, 0, 0}, {0x460b, 0x37, 0, 0}, {0x460c, 0x20, 0, 0}, + {0x3824, 0x04, 0, 0}, {0x5001, 0x83, 0, 0}, +}; + +static const struct reg_value ov5640_setting_1080P_1920_1080[] = { + {0x3c07, 0x08, 0, 0}, + {0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0}, + {0x3814, 0x11, 0, 0}, + {0x3815, 0x11, 0, 0}, + {0x3618, 0x04, 0, 0}, {0x3612, 0x29, 0, 0}, {0x3708, 0x21, 0, 0}, + {0x3709, 0x12, 0, 0}, {0x370c, 0x00, 0, 0}, {0x3a02, 0x03, 0, 0}, + {0x3a03, 0xd8, 0, 0}, {0x3a08, 0x01, 0, 0}, {0x3a09, 0x27, 0, 0}, + {0x3a0a, 0x00, 0, 0}, {0x3a0b, 0xf6, 0, 0}, {0x3a0e, 0x03, 0, 0}, + {0x3a0d, 0x04, 0, 0}, {0x3a14, 0x03, 0, 0}, {0x3a15, 0xd8, 0, 0}, + {0x4001, 0x02, 0, 0}, {0x4004, 0x06, 0, 0}, + {0x4407, 0x04, 0, 0}, {0x460b, 0x35, 0, 0}, {0x460c, 0x22, 0, 0}, + {0x3824, 0x02, 0, 0}, {0x5001, 0x83, 0, 0}, + {0x3c07, 0x07, 0, 0}, {0x3c08, 0x00, 0, 0}, + {0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0}, + {0x3612, 0x2b, 0, 0}, {0x3708, 0x64, 0, 0}, + {0x3a02, 0x04, 0, 0}, {0x3a03, 0x60, 0, 0}, {0x3a08, 0x01, 0, 0}, + {0x3a09, 0x50, 0, 0}, {0x3a0a, 0x01, 0, 0}, {0x3a0b, 0x18, 0, 0}, + {0x3a0e, 0x03, 0, 0}, {0x3a0d, 0x04, 0, 0}, {0x3a14, 0x04, 0, 0}, + {0x3a15, 0x60, 0, 0}, {0x4407, 0x04, 0, 0}, + {0x460b, 0x37, 0, 0}, {0x460c, 0x20, 0, 0}, {0x3824, 0x04, 0, 0}, + {0x4005, 0x1a, 0, 0}, +}; + +static const struct reg_value ov5640_setting_QSXGA_2592_1944[] = { + {0x3c07, 0x08, 0, 0}, + {0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0}, + {0x3814, 0x11, 0, 0}, + {0x3815, 0x11, 0, 0}, + {0x3618, 0x04, 0, 0}, {0x3612, 0x29, 0, 0}, {0x3708, 0x21, 0, 0}, + {0x3709, 0x12, 0, 0}, {0x370c, 0x00, 0, 0}, {0x3a02, 0x03, 0, 0}, + {0x3a03, 0xd8, 0, 0}, {0x3a08, 0x01, 0, 0}, {0x3a09, 0x27, 0, 0}, + {0x3a0a, 0x00, 0, 0}, {0x3a0b, 0xf6, 0, 0}, {0x3a0e, 0x03, 0, 0}, + {0x3a0d, 0x04, 0, 0}, {0x3a14, 0x03, 0, 0}, {0x3a15, 0xd8, 0, 0}, + {0x4001, 0x02, 0, 0}, {0x4004, 0x06, 0, 0}, + {0x4407, 0x04, 0, 0}, {0x460b, 0x35, 0, 0}, {0x460c, 0x22, 0, 0}, + {0x3824, 0x02, 0, 0}, {0x5001, 0x83, 0, 70}, +}; + +static const struct ov5640_mode_info ov5640_mode_data[OV5640_NUM_MODES] = { + { + /* 160x120 */ + .id = OV5640_MODE_QQVGA_160_120, + .dn_mode = SUBSAMPLING, + .pixel_rate = OV5640_PIXEL_RATE_48M, + .width = 160, + .height = 120, + .dvp_timings = { + .analog_crop = { + .left = 0, + .top = 4, + .width = 2624, + .height = 1944, + }, + .crop = { + .left = 16, + .top = 6, + .width = 160, + .height = 120, + }, + .htot = 1896, + .vblank_def = 864, + }, + .csi2_timings = { + /* Feed the full valid pixel array to the ISP. */ + .analog_crop = { + .left = OV5640_PIXEL_ARRAY_LEFT, + .top = OV5640_PIXEL_ARRAY_TOP, + .width = OV5640_PIXEL_ARRAY_WIDTH, + .height = OV5640_PIXEL_ARRAY_HEIGHT, + }, + /* Maintain a minimum processing margin. */ + .crop = { + .left = 2, + .top = 4, + .width = 160, + .height = 120, + }, + .htot = 1600, + .vblank_def = 878, + }, + .reg_data = ov5640_setting_low_res, + .reg_data_size = ARRAY_SIZE(ov5640_setting_low_res), + .max_fps = OV5640_30_FPS, + .def_fps = OV5640_30_FPS + }, { + /* 176x144 */ + .id = OV5640_MODE_QCIF_176_144, + .dn_mode = SUBSAMPLING, + .pixel_rate = OV5640_PIXEL_RATE_48M, + .width = 176, + .height = 144, + .dvp_timings = { + .analog_crop = { + .left = 0, + .top = 4, + .width = 2624, + .height = 1944, + }, + .crop = { + .left = 16, + .top = 6, + .width = 176, + .height = 144, + }, + .htot = 1896, + .vblank_def = 840, + }, + .csi2_timings = { + /* Feed the full valid pixel array to the ISP. */ + .analog_crop = { + .left = OV5640_PIXEL_ARRAY_LEFT, + .top = OV5640_PIXEL_ARRAY_TOP, + .width = OV5640_PIXEL_ARRAY_WIDTH, + .height = OV5640_PIXEL_ARRAY_HEIGHT, + }, + /* Maintain a minimum processing margin. */ + .crop = { + .left = 2, + .top = 4, + .width = 176, + .height = 144, + }, + .htot = 1600, + .vblank_def = 854, + }, + .reg_data = ov5640_setting_low_res, + .reg_data_size = ARRAY_SIZE(ov5640_setting_low_res), + .max_fps = OV5640_30_FPS, + .def_fps = OV5640_30_FPS + }, { + /* 320x240 */ + .id = OV5640_MODE_QVGA_320_240, + .dn_mode = SUBSAMPLING, + .width = 320, + .height = 240, + .pixel_rate = OV5640_PIXEL_RATE_48M, + .dvp_timings = { + .analog_crop = { + .left = 0, + .top = 4, + .width = 2624, + .height = 1944, + }, + .crop = { + .left = 16, + .top = 6, + .width = 320, + .height = 240, + }, + .htot = 1896, + .vblank_def = 744, + }, + .csi2_timings = { + /* Feed the full valid pixel array to the ISP. */ + .analog_crop = { + .left = OV5640_PIXEL_ARRAY_LEFT, + .top = OV5640_PIXEL_ARRAY_TOP, + .width = OV5640_PIXEL_ARRAY_WIDTH, + .height = OV5640_PIXEL_ARRAY_HEIGHT, + }, + /* Maintain a minimum processing margin. */ + .crop = { + .left = 2, + .top = 4, + .width = 320, + .height = 240, + }, + .htot = 1600, + .vblank_def = 760, + }, + .reg_data = ov5640_setting_low_res, + .reg_data_size = ARRAY_SIZE(ov5640_setting_low_res), + .max_fps = OV5640_30_FPS, + .def_fps = OV5640_30_FPS + }, { + /* 640x480 */ + .id = OV5640_MODE_VGA_640_480, + .dn_mode = SUBSAMPLING, + .pixel_rate = OV5640_PIXEL_RATE_48M, + .width = 640, + .height = 480, + .dvp_timings = { + .analog_crop = { + .left = 0, + .top = 4, + .width = 2624, + .height = 1944, + }, + .crop = { + .left = 16, + .top = 6, + .width = 640, + .height = 480, + }, + .htot = 1896, + .vblank_def = 600, + }, + .csi2_timings = { + /* Feed the full valid pixel array to the ISP. */ + .analog_crop = { + .left = OV5640_PIXEL_ARRAY_LEFT, + .top = OV5640_PIXEL_ARRAY_TOP, + .width = OV5640_PIXEL_ARRAY_WIDTH, + .height = OV5640_PIXEL_ARRAY_HEIGHT, + }, + /* Maintain a minimum processing margin. */ + .crop = { + .left = 2, + .top = 4, + .width = 640, + .height = 480, + }, + .htot = 1600, + .vblank_def = 520, + }, + .reg_data = ov5640_setting_low_res, + .reg_data_size = ARRAY_SIZE(ov5640_setting_low_res), + .max_fps = OV5640_60_FPS, + .def_fps = OV5640_30_FPS + }, { + /* 720x480 */ + .id = OV5640_MODE_NTSC_720_480, + .dn_mode = SUBSAMPLING, + .width = 720, + .height = 480, + .pixel_rate = OV5640_PIXEL_RATE_96M, + .dvp_timings = { + .analog_crop = { + .left = 0, + .top = 4, + .width = 2624, + .height = 1944, + }, + .crop = { + .left = 56, + .top = 60, + .width = 720, + .height = 480, + }, + .htot = 1896, + .vblank_def = 504, + }, + .csi2_timings = { + /* Feed the full valid pixel array to the ISP. */ + .analog_crop = { + .left = OV5640_PIXEL_ARRAY_LEFT, + .top = OV5640_PIXEL_ARRAY_TOP, + .width = OV5640_PIXEL_ARRAY_WIDTH, + .height = OV5640_PIXEL_ARRAY_HEIGHT, + }, + .crop = { + .left = 56, + .top = 60, + .width = 720, + .height = 480, + }, + .htot = 1896, + .vblank_def = 1206, + }, + .reg_data = ov5640_setting_low_res, + .reg_data_size = ARRAY_SIZE(ov5640_setting_low_res), + .max_fps = OV5640_30_FPS, + .def_fps = OV5640_30_FPS + }, { + /* 720x576 */ + .id = OV5640_MODE_PAL_720_576, + .dn_mode = SUBSAMPLING, + .width = 720, + .height = 576, + .pixel_rate = OV5640_PIXEL_RATE_96M, + .dvp_timings = { + .analog_crop = { + .left = 0, + .top = 4, + .width = 2624, + .height = 1944, + }, + .crop = { + .left = 56, + .top = 6, + .width = 720, + .height = 576, + }, + .htot = 1896, + .vblank_def = 408, + }, + .csi2_timings = { + /* Feed the full valid pixel array to the ISP. */ + .analog_crop = { + .left = OV5640_PIXEL_ARRAY_LEFT, + .top = OV5640_PIXEL_ARRAY_TOP, + .width = OV5640_PIXEL_ARRAY_WIDTH, + .height = OV5640_PIXEL_ARRAY_HEIGHT, + }, + .crop = { + .left = 56, + .top = 6, + .width = 720, + .height = 576, + }, + .htot = 1896, + .vblank_def = 1110, + }, + .reg_data = ov5640_setting_low_res, + .reg_data_size = ARRAY_SIZE(ov5640_setting_low_res), + .max_fps = OV5640_30_FPS, + .def_fps = OV5640_30_FPS + }, { + /* 1024x768 */ + .id = OV5640_MODE_XGA_1024_768, + .dn_mode = SUBSAMPLING, + .pixel_rate = OV5640_PIXEL_RATE_96M, + .width = 1024, + .height = 768, + .dvp_timings = { + .analog_crop = { + .left = 0, + .top = 4, + .width = 2624, + .height = 1944, + }, + .crop = { + .left = 16, + .top = 6, + .width = 1024, + .height = 768, + }, + .htot = 1896, + .vblank_def = 312, + }, + .csi2_timings = { + .analog_crop = { + .left = 0, + .top = 4, + .width = OV5640_NATIVE_WIDTH, + .height = OV5640_PIXEL_ARRAY_HEIGHT, + }, + .crop = { + .left = 16, + .top = 6, + .width = 1024, + .height = 768, + }, + .htot = 1896, + .vblank_def = 918, + }, + .reg_data = ov5640_setting_low_res, + .reg_data_size = ARRAY_SIZE(ov5640_setting_low_res), + .max_fps = OV5640_30_FPS, + .def_fps = OV5640_30_FPS + }, { + /* 1280x720 */ + .id = OV5640_MODE_720P_1280_720, + .dn_mode = SUBSAMPLING, + .pixel_rate = OV5640_PIXEL_RATE_124M, + .width = 1280, + .height = 720, + .dvp_timings = { + .analog_crop = { + .left = 0, + .top = 250, + .width = 2624, + .height = 1456, + }, + .crop = { + .left = 16, + .top = 4, + .width = 1280, + .height = 720, + }, + .htot = 1892, + .vblank_def = 20, + }, + .csi2_timings = { + .analog_crop = { + .left = 0, + .top = 250, + .width = 2624, + .height = 1456, + }, + .crop = { + .left = 16, + .top = 4, + .width = 1280, + .height = 720, + }, + .htot = 1600, + .vblank_def = 560, + }, + .reg_data = ov5640_setting_720P_1280_720, + .reg_data_size = ARRAY_SIZE(ov5640_setting_720P_1280_720), + .max_fps = OV5640_30_FPS, + .def_fps = OV5640_30_FPS + }, { + /* 1920x1080 */ + .id = OV5640_MODE_1080P_1920_1080, + .dn_mode = SCALING, + .pixel_rate = OV5640_PIXEL_RATE_148M, + .width = 1920, + .height = 1080, + .dvp_timings = { + .analog_crop = { + .left = 336, + .top = 434, + .width = 1952, + .height = 1088, + }, + .crop = { + .left = 16, + .top = 4, + .width = 1920, + .height = 1080, + }, + .htot = 2500, + .vblank_def = 40, + }, + .csi2_timings = { + /* Crop the full valid pixel array in the center. */ + .analog_crop = { + .left = 336, + .top = 434, + .width = 1952, + .height = 1088, + }, + /* Maintain a larger processing margins. */ + .crop = { + .left = 16, + .top = 4, + .width = 1920, + .height = 1080, + }, + .htot = 2234, + .vblank_def = 24, + }, + .reg_data = ov5640_setting_1080P_1920_1080, + .reg_data_size = ARRAY_SIZE(ov5640_setting_1080P_1920_1080), + .max_fps = OV5640_30_FPS, + .def_fps = OV5640_30_FPS + }, { + /* 2592x1944 */ + .id = OV5640_MODE_QSXGA_2592_1944, + .dn_mode = SCALING, + .pixel_rate = OV5640_PIXEL_RATE_168M, + .width = OV5640_PIXEL_ARRAY_WIDTH, + .height = OV5640_PIXEL_ARRAY_HEIGHT, + .dvp_timings = { + .analog_crop = { + .left = 0, + .top = 0, + .width = 2624, + .height = 1952, + }, + .crop = { + .left = 16, + .top = 4, + .width = 2592, + .height = 1944, + }, + .htot = 2844, + .vblank_def = 24, + }, + .csi2_timings = { + /* Give more processing margin to full resolution. */ + .analog_crop = { + .left = 0, + .top = 0, + .width = OV5640_NATIVE_WIDTH, + .height = 1952, + }, + .crop = { + .left = 16, + .top = 4, + .width = 2592, + .height = 1944, + }, + .htot = 2844, + .vblank_def = 24, + }, + .reg_data = ov5640_setting_QSXGA_2592_1944, + .reg_data_size = ARRAY_SIZE(ov5640_setting_QSXGA_2592_1944), + .max_fps = OV5640_15_FPS, + .def_fps = OV5640_15_FPS + }, +}; + +static const struct ov5640_timings * +ov5640_timings(const struct ov5640_dev *sensor, + const struct ov5640_mode_info *mode) +{ + if (ov5640_is_csi2(sensor)) + return &mode->csi2_timings; + + return &mode->dvp_timings; +} + +static int ov5640_init_slave_id(struct ov5640_dev *sensor) +{ + struct i2c_client *client = sensor->i2c_client; + struct i2c_msg msg; + u8 buf[3]; + int ret; + + if (client->addr == OV5640_DEFAULT_SLAVE_ID) + return 0; + + buf[0] = OV5640_REG_SLAVE_ID >> 8; + buf[1] = OV5640_REG_SLAVE_ID & 0xff; + buf[2] = client->addr << 1; + + msg.addr = OV5640_DEFAULT_SLAVE_ID; + msg.flags = 0; + msg.buf = buf; + msg.len = sizeof(buf); + + ret = i2c_transfer(client->adapter, &msg, 1); + if (ret < 0) { + dev_err(&client->dev, "%s: failed with %d\n", __func__, ret); + return ret; + } + + return 0; +} + +static int ov5640_write_reg(struct ov5640_dev *sensor, u16 reg, u8 val) +{ + struct i2c_client *client = sensor->i2c_client; + struct i2c_msg msg; + u8 buf[3]; + int ret; + + buf[0] = reg >> 8; + buf[1] = reg & 0xff; + buf[2] = val; + + msg.addr = client->addr; + msg.flags = client->flags; + msg.buf = buf; + msg.len = sizeof(buf); + + ret = i2c_transfer(client->adapter, &msg, 1); + if (ret < 0) { + dev_err(&client->dev, "%s: error: reg=%x, val=%x\n", + __func__, reg, val); + return ret; + } + + return 0; +} + +static int ov5640_read_reg(struct ov5640_dev *sensor, u16 reg, u8 *val) +{ + struct i2c_client *client = sensor->i2c_client; + struct i2c_msg msg[2]; + u8 buf[2]; + int ret; + + buf[0] = reg >> 8; + buf[1] = reg & 0xff; + + msg[0].addr = client->addr; + msg[0].flags = client->flags; + msg[0].buf = buf; + msg[0].len = sizeof(buf); + + msg[1].addr = client->addr; + msg[1].flags = client->flags | I2C_M_RD; + msg[1].buf = buf; + msg[1].len = 1; + + ret = i2c_transfer(client->adapter, msg, 2); + if (ret < 0) { + dev_err(&client->dev, "%s: error: reg=%x\n", + __func__, reg); + return ret; + } + + *val = buf[0]; + return 0; +} + +static int ov5640_read_reg16(struct ov5640_dev *sensor, u16 reg, u16 *val) +{ + u8 hi, lo; + int ret; + + ret = ov5640_read_reg(sensor, reg, &hi); + if (ret) + return ret; + ret = ov5640_read_reg(sensor, reg + 1, &lo); + if (ret) + return ret; + + *val = ((u16)hi << 8) | (u16)lo; + return 0; +} + +static int ov5640_write_reg16(struct ov5640_dev *sensor, u16 reg, u16 val) +{ + int ret; + + ret = ov5640_write_reg(sensor, reg, val >> 8); + if (ret) + return ret; + + return ov5640_write_reg(sensor, reg + 1, val & 0xff); +} + +static int ov5640_mod_reg(struct ov5640_dev *sensor, u16 reg, + u8 mask, u8 val) +{ + u8 readval; + int ret; + + ret = ov5640_read_reg(sensor, reg, &readval); + if (ret) + return ret; + + readval &= ~mask; + val &= mask; + val |= readval; + + return ov5640_write_reg(sensor, reg, val); +} + +/* + * After trying the various combinations, reading various + * documentations spread around the net, and from the various + * feedback, the clock tree is probably as follows: + * + * +--------------+ + * | Ext. Clock | + * +-+------------+ + * | +----------+ + * +->| PLL1 | - reg 0x3036, for the multiplier + * +-+--------+ - reg 0x3037, bits 0-3 for the pre-divider + * | +--------------+ + * +->| System Clock | - reg 0x3035, bits 4-7 + * +-+------------+ + * | +--------------+ + * +->| MIPI Divider | - reg 0x3035, bits 0-3 + * | +-+------------+ + * | +----------------> MIPI SCLK + * | + +-----+ + * | +->| / 2 |-------> MIPI BIT CLK + * | +-----+ + * | +--------------+ + * +->| PLL Root Div | - reg 0x3037, bit 4 + * +-+------------+ + * | +---------+ + * +->| Bit Div | - reg 0x3034, bits 0-3 + * +-+-------+ + * | +-------------+ + * +->| SCLK Div | - reg 0x3108, bits 0-1 + * | +-+-----------+ + * | +---------------> SCLK + * | +-------------+ + * +->| SCLK 2X Div | - reg 0x3108, bits 2-3 + * | +-+-----------+ + * | +---------------> SCLK 2X + * | +-------------+ + * +->| PCLK Div | - reg 0x3108, bits 4-5 + * ++------------+ + * + +-----------+ + * +->| P_DIV | - reg 0x3035, bits 0-3 + * +-----+-----+ + * +------------> PCLK + * + * There seems to be also constraints: + * - the PLL pre-divider output rate should be in the 4-27MHz range + * - the PLL multiplier output rate should be in the 500-1000MHz range + * - PCLK >= SCLK * 2 in YUV, >= SCLK in Raw or JPEG + */ + +/* + * This is supposed to be ranging from 1 to 8, but the value is always + * set to 3 in the vendor kernels. + */ +#define OV5640_PLL_PREDIV 3 + +#define OV5640_PLL_MULT_MIN 4 +#define OV5640_PLL_MULT_MAX 252 + +/* + * This is supposed to be ranging from 1 to 16, but the value is + * always set to either 1 or 2 in the vendor kernels. + */ +#define OV5640_SYSDIV_MIN 1 +#define OV5640_SYSDIV_MAX 16 + +/* + * This is supposed to be ranging from 1 to 2, but the value is always + * set to 2 in the vendor kernels. + */ +#define OV5640_PLL_ROOT_DIV 2 +#define OV5640_PLL_CTRL3_PLL_ROOT_DIV_2 BIT(4) + +/* + * We only supports 8-bit formats at the moment + */ +#define OV5640_BIT_DIV 2 +#define OV5640_PLL_CTRL0_MIPI_MODE_8BIT 0x08 + +/* + * This is supposed to be ranging from 1 to 8, but the value is always + * set to 2 in the vendor kernels. + */ +#define OV5640_SCLK_ROOT_DIV 2 + +/* + * This is hardcoded so that the consistency is maintained between SCLK and + * SCLK 2x. + */ +#define OV5640_SCLK2X_ROOT_DIV (OV5640_SCLK_ROOT_DIV / 2) + +/* + * This is supposed to be ranging from 1 to 8, but the value is always + * set to 1 in the vendor kernels. + */ +#define OV5640_PCLK_ROOT_DIV 1 +#define OV5640_PLL_SYS_ROOT_DIVIDER_BYPASS 0x00 + +static unsigned long ov5640_compute_sys_clk(struct ov5640_dev *sensor, + u8 pll_prediv, u8 pll_mult, + u8 sysdiv) +{ + unsigned long sysclk = sensor->xclk_freq / pll_prediv * pll_mult; + + /* PLL1 output cannot exceed 1GHz. */ + if (sysclk / 1000000 > 1000) + return 0; + + return sysclk / sysdiv; +} + +static unsigned long ov5640_calc_sys_clk(struct ov5640_dev *sensor, + unsigned long rate, + u8 *pll_prediv, u8 *pll_mult, + u8 *sysdiv) +{ + unsigned long best = ~0; + u8 best_sysdiv = 1, best_mult = 1; + u8 _sysdiv, _pll_mult; + + for (_sysdiv = OV5640_SYSDIV_MIN; + _sysdiv <= OV5640_SYSDIV_MAX; + _sysdiv++) { + for (_pll_mult = OV5640_PLL_MULT_MIN; + _pll_mult <= OV5640_PLL_MULT_MAX; + _pll_mult++) { + unsigned long _rate; + + /* + * The PLL multiplier cannot be odd if above + * 127. + */ + if (_pll_mult > 127 && (_pll_mult % 2)) + continue; + + _rate = ov5640_compute_sys_clk(sensor, + OV5640_PLL_PREDIV, + _pll_mult, _sysdiv); + + /* + * We have reached the maximum allowed PLL1 output, + * increase sysdiv. + */ + if (!_rate) + break; + + /* + * Prefer rates above the expected clock rate than + * below, even if that means being less precise. + */ + if (_rate < rate) + continue; + + if (abs(rate - _rate) < abs(rate - best)) { + best = _rate; + best_sysdiv = _sysdiv; + best_mult = _pll_mult; + } + + if (_rate == rate) + goto out; + } + } + +out: + *sysdiv = best_sysdiv; + *pll_prediv = OV5640_PLL_PREDIV; + *pll_mult = best_mult; + + return best; +} + +/* + * ov5640_set_mipi_pclk() - Calculate the clock tree configuration values + * for the MIPI CSI-2 output. + */ +static int ov5640_set_mipi_pclk(struct ov5640_dev *sensor) +{ + u8 bit_div, mipi_div, pclk_div, sclk_div, sclk2x_div, root_div; + u8 prediv, mult, sysdiv; + unsigned long link_freq; + unsigned long sysclk; + u8 pclk_period; + u32 sample_rate; + u32 num_lanes; + int ret; + + /* Use the link freq computed at ov5640_update_pixel_rate() time. */ + link_freq = sensor->current_link_freq; + + /* + * - mipi_div - Additional divider for the MIPI lane clock. + * + * Higher link frequencies would make sysclk > 1GHz. + * Keep the sysclk low and do not divide in the MIPI domain. + */ + if (link_freq > OV5640_LINK_RATE_MAX) + mipi_div = 1; + else + mipi_div = 2; + + sysclk = link_freq * mipi_div; + ov5640_calc_sys_clk(sensor, sysclk, &prediv, &mult, &sysdiv); + + /* + * Adjust PLL parameters to maintain the MIPI_SCLK-to-PCLK ratio. + * + * - root_div = 2 (fixed) + * - bit_div : MIPI 8-bit = 2; MIPI 10-bit = 2.5 + * - pclk_div = 1 (fixed) + * - p_div = (2 lanes ? mipi_div : 2 * mipi_div) + * + * This results in the following MIPI_SCLK depending on the number + * of lanes: + * + * - 2 lanes: MIPI_SCLK = (4 or 5) * PCLK + * - 1 lanes: MIPI_SCLK = (8 or 10) * PCLK + */ + root_div = OV5640_PLL_CTRL3_PLL_ROOT_DIV_2; + bit_div = OV5640_PLL_CTRL0_MIPI_MODE_8BIT; + pclk_div = ilog2(OV5640_PCLK_ROOT_DIV); + + /* + * Scaler clock: + * - YUV: PCLK >= 2 * SCLK + * - RAW or JPEG: PCLK >= SCLK + * - sclk2x_div = sclk_div / 2 + */ + sclk_div = ilog2(OV5640_SCLK_ROOT_DIV); + sclk2x_div = ilog2(OV5640_SCLK2X_ROOT_DIV); + + /* + * Set the pixel clock period expressed in ns with 1-bit decimal + * (0x01=0.5ns). + * + * The register is very briefly documented. In the OV5645 datasheet it + * is described as (2 * pclk period), and from testing it seems the + * actual definition is 2 * 8-bit sample period. + * + * 2 * sample_period = (mipi_clk * 2 * num_lanes / bpp) * (bpp / 8) / 2 + */ + num_lanes = sensor->ep.bus.mipi_csi2.num_data_lanes; + sample_rate = (link_freq * mipi_div * num_lanes * 2) / 16; + pclk_period = 2000000000UL / sample_rate; + + /* Program the clock tree registers. */ + ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL0, 0x0f, bit_div); + if (ret) + return ret; + + ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL1, 0xff, + (sysdiv << 4) | mipi_div); + if (ret) + return ret; + + ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL2, 0xff, mult); + if (ret) + return ret; + + ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL3, 0x1f, + root_div | prediv); + if (ret) + return ret; + + ret = ov5640_mod_reg(sensor, OV5640_REG_SYS_ROOT_DIVIDER, 0x3f, + (pclk_div << 4) | (sclk2x_div << 2) | sclk_div); + if (ret) + return ret; + + return ov5640_write_reg(sensor, OV5640_REG_PCLK_PERIOD, pclk_period); +} + +static u32 ov5640_calc_pixel_rate(struct ov5640_dev *sensor) +{ + const struct ov5640_mode_info *mode = sensor->current_mode; + const struct ov5640_timings *timings = &mode->dvp_timings; + u32 rate; + + rate = timings->htot * (timings->crop.height + timings->vblank_def); + rate *= ov5640_framerates[sensor->current_fr]; + + return rate; +} + +static unsigned long ov5640_calc_pclk(struct ov5640_dev *sensor, + unsigned long rate, + u8 *pll_prediv, u8 *pll_mult, u8 *sysdiv, + u8 *pll_rdiv, u8 *bit_div, u8 *pclk_div) +{ + unsigned long _rate = rate * OV5640_PLL_ROOT_DIV * OV5640_BIT_DIV * + OV5640_PCLK_ROOT_DIV; + + _rate = ov5640_calc_sys_clk(sensor, _rate, pll_prediv, pll_mult, + sysdiv); + *pll_rdiv = OV5640_PLL_ROOT_DIV; + *bit_div = OV5640_BIT_DIV; + *pclk_div = OV5640_PCLK_ROOT_DIV; + + return _rate / *pll_rdiv / *bit_div / *pclk_div; +} + +static int ov5640_set_dvp_pclk(struct ov5640_dev *sensor) +{ + u8 prediv, mult, sysdiv, pll_rdiv, bit_div, pclk_div; + u32 rate; + int ret; + + rate = ov5640_calc_pixel_rate(sensor); + rate *= ov5640_code_to_bpp(sensor, sensor->fmt.code); + rate /= sensor->ep.bus.parallel.bus_width; + + ov5640_calc_pclk(sensor, rate, &prediv, &mult, &sysdiv, &pll_rdiv, + &bit_div, &pclk_div); + + if (bit_div == 2) + bit_div = 8; + + ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL0, + 0x0f, bit_div); + if (ret) + return ret; + + /* + * We need to set sysdiv according to the clock, and to clear + * the MIPI divider. + */ + ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL1, + 0xff, sysdiv << 4); + if (ret) + return ret; + + ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL2, + 0xff, mult); + if (ret) + return ret; + + ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL3, + 0x1f, prediv | ((pll_rdiv - 1) << 4)); + if (ret) + return ret; + + return ov5640_mod_reg(sensor, OV5640_REG_SYS_ROOT_DIVIDER, 0x30, + (ilog2(pclk_div) << 4)); +} + +/* set JPEG framing sizes */ +static int ov5640_set_jpeg_timings(struct ov5640_dev *sensor, + const struct ov5640_mode_info *mode) +{ + int ret; + + /* + * compression mode 3 timing + * + * Data is transmitted with programmable width (VFIFO_HSIZE). + * No padding done. Last line may have less data. Varying + * number of lines per frame, depending on amount of data. + */ + ret = ov5640_mod_reg(sensor, OV5640_REG_JPG_MODE_SELECT, 0x7, 0x3); + if (ret < 0) + return ret; + + ret = ov5640_write_reg16(sensor, OV5640_REG_VFIFO_HSIZE, mode->width); + if (ret < 0) + return ret; + + return ov5640_write_reg16(sensor, OV5640_REG_VFIFO_VSIZE, mode->height); +} + +/* download ov5640 settings to sensor through i2c */ +static int ov5640_set_timings(struct ov5640_dev *sensor, + const struct ov5640_mode_info *mode) +{ + const struct ov5640_timings *timings; + const struct v4l2_rect *analog_crop; + const struct v4l2_rect *crop; + int ret; + + if (sensor->fmt.code == MEDIA_BUS_FMT_JPEG_1X8) { + ret = ov5640_set_jpeg_timings(sensor, mode); + if (ret < 0) + return ret; + } + + timings = ov5640_timings(sensor, mode); + analog_crop = &timings->analog_crop; + crop = &timings->crop; + + ret = ov5640_write_reg16(sensor, OV5640_REG_TIMING_HS, + analog_crop->left); + if (ret < 0) + return ret; + + ret = ov5640_write_reg16(sensor, OV5640_REG_TIMING_VS, + analog_crop->top); + if (ret < 0) + return ret; + + ret = ov5640_write_reg16(sensor, OV5640_REG_TIMING_HW, + analog_crop->left + analog_crop->width - 1); + if (ret < 0) + return ret; + + ret = ov5640_write_reg16(sensor, OV5640_REG_TIMING_VH, + analog_crop->top + analog_crop->height - 1); + if (ret < 0) + return ret; + + ret = ov5640_write_reg16(sensor, OV5640_REG_TIMING_HOFFS, crop->left); + if (ret < 0) + return ret; + + ret = ov5640_write_reg16(sensor, OV5640_REG_TIMING_VOFFS, crop->top); + if (ret < 0) + return ret; + + ret = ov5640_write_reg16(sensor, OV5640_REG_TIMING_DVPHO, mode->width); + if (ret < 0) + return ret; + + ret = ov5640_write_reg16(sensor, OV5640_REG_TIMING_DVPVO, mode->height); + if (ret < 0) + return ret; + + ret = ov5640_write_reg16(sensor, OV5640_REG_TIMING_HTS, timings->htot); + if (ret < 0) + return ret; + + ret = ov5640_write_reg16(sensor, OV5640_REG_TIMING_VTS, + mode->height + timings->vblank_def); + if (ret < 0) + return ret; + + return 0; +} + +static void ov5640_load_regs(struct ov5640_dev *sensor, + const struct reg_value *regs, unsigned int regnum) +{ + unsigned int i; + u32 delay_ms; + u16 reg_addr; + u8 mask, val; + int ret = 0; + + for (i = 0; i < regnum; ++i, ++regs) { + delay_ms = regs->delay_ms; + reg_addr = regs->reg_addr; + val = regs->val; + mask = regs->mask; + + /* remain in power down mode for DVP */ + if (regs->reg_addr == OV5640_REG_SYS_CTRL0 && + val == OV5640_REG_SYS_CTRL0_SW_PWUP && + !ov5640_is_csi2(sensor)) + continue; + + if (mask) + ret = ov5640_mod_reg(sensor, reg_addr, mask, val); + else + ret = ov5640_write_reg(sensor, reg_addr, val); + if (ret) + break; + + if (delay_ms) + usleep_range(1000 * delay_ms, 1000 * delay_ms + 100); + } +} + +static int ov5640_set_autoexposure(struct ov5640_dev *sensor, bool on) +{ + return ov5640_mod_reg(sensor, OV5640_REG_AEC_PK_MANUAL, + BIT(0), on ? 0 : BIT(0)); +} + +/* read exposure, in number of line periods */ +static int ov5640_get_exposure(struct ov5640_dev *sensor) +{ + int exp, ret; + u8 temp; + + ret = ov5640_read_reg(sensor, OV5640_REG_AEC_PK_EXPOSURE_HI, &temp); + if (ret) + return ret; + exp = ((int)temp & 0x0f) << 16; + ret = ov5640_read_reg(sensor, OV5640_REG_AEC_PK_EXPOSURE_MED, &temp); + if (ret) + return ret; + exp |= ((int)temp << 8); + ret = ov5640_read_reg(sensor, OV5640_REG_AEC_PK_EXPOSURE_LO, &temp); + if (ret) + return ret; + exp |= (int)temp; + + return exp >> 4; +} + +/* write exposure, given number of line periods */ +static int ov5640_set_exposure(struct ov5640_dev *sensor, u32 exposure) +{ + int ret; + + exposure <<= 4; + + ret = ov5640_write_reg(sensor, + OV5640_REG_AEC_PK_EXPOSURE_LO, + exposure & 0xff); + if (ret) + return ret; + ret = ov5640_write_reg(sensor, + OV5640_REG_AEC_PK_EXPOSURE_MED, + (exposure >> 8) & 0xff); + if (ret) + return ret; + return ov5640_write_reg(sensor, + OV5640_REG_AEC_PK_EXPOSURE_HI, + (exposure >> 16) & 0x0f); +} + +static int ov5640_get_gain(struct ov5640_dev *sensor) +{ + u16 gain; + int ret; + + ret = ov5640_read_reg16(sensor, OV5640_REG_AEC_PK_REAL_GAIN, &gain); + if (ret) + return ret; + + return gain & 0x3ff; +} + +static int ov5640_set_gain(struct ov5640_dev *sensor, int gain) +{ + return ov5640_write_reg16(sensor, OV5640_REG_AEC_PK_REAL_GAIN, + (u16)gain & 0x3ff); +} + +static int ov5640_set_autogain(struct ov5640_dev *sensor, bool on) +{ + return ov5640_mod_reg(sensor, OV5640_REG_AEC_PK_MANUAL, + BIT(1), on ? 0 : BIT(1)); +} + +static int ov5640_set_stream_dvp(struct ov5640_dev *sensor, bool on) +{ + return ov5640_write_reg(sensor, OV5640_REG_SYS_CTRL0, on ? + OV5640_REG_SYS_CTRL0_SW_PWUP : + OV5640_REG_SYS_CTRL0_SW_PWDN); +} + +static int ov5640_set_stream_mipi(struct ov5640_dev *sensor, bool on) +{ + int ret; + + /* + * Enable/disable the MIPI interface + * + * 0x300e = on ? 0x45 : 0x40 + * + * FIXME: the sensor manual (version 2.03) reports + * [7:5] = 000 : 1 data lane mode + * [7:5] = 001 : 2 data lanes mode + * But this settings do not work, while the following ones + * have been validated for 2 data lanes mode. + * + * [7:5] = 010 : 2 data lanes mode + * [4] = 0 : Power up MIPI HS Tx + * [3] = 0 : Power up MIPI LS Rx + * [2] = 1/0 : MIPI interface enable/disable + * [1:0] = 01/00: FIXME: 'debug' + */ + ret = ov5640_write_reg(sensor, OV5640_REG_IO_MIPI_CTRL00, + on ? 0x45 : 0x40); + if (ret) + return ret; + + return ov5640_write_reg(sensor, OV5640_REG_FRAME_CTRL01, + on ? 0x00 : 0x0f); +} + +static int ov5640_get_sysclk(struct ov5640_dev *sensor) +{ + /* calculate sysclk */ + u32 xvclk = sensor->xclk_freq / 10000; + u32 multiplier, prediv, VCO, sysdiv, pll_rdiv; + u32 sclk_rdiv_map[] = {1, 2, 4, 8}; + u32 bit_div2x = 1, sclk_rdiv, sysclk; + u8 temp1, temp2; + int ret; + + ret = ov5640_read_reg(sensor, OV5640_REG_SC_PLL_CTRL0, &temp1); + if (ret) + return ret; + temp2 = temp1 & 0x0f; + if (temp2 == 8 || temp2 == 10) + bit_div2x = temp2 / 2; + + ret = ov5640_read_reg(sensor, OV5640_REG_SC_PLL_CTRL1, &temp1); + if (ret) + return ret; + sysdiv = temp1 >> 4; + if (sysdiv == 0) + sysdiv = 16; + + ret = ov5640_read_reg(sensor, OV5640_REG_SC_PLL_CTRL2, &temp1); + if (ret) + return ret; + multiplier = temp1; + + ret = ov5640_read_reg(sensor, OV5640_REG_SC_PLL_CTRL3, &temp1); + if (ret) + return ret; + prediv = temp1 & 0x0f; + pll_rdiv = ((temp1 >> 4) & 0x01) + 1; + + ret = ov5640_read_reg(sensor, OV5640_REG_SYS_ROOT_DIVIDER, &temp1); + if (ret) + return ret; + temp2 = temp1 & 0x03; + sclk_rdiv = sclk_rdiv_map[temp2]; + + if (!prediv || !sysdiv || !pll_rdiv || !bit_div2x) + return -EINVAL; + + VCO = xvclk * multiplier / prediv; + + sysclk = VCO / sysdiv / pll_rdiv * 2 / bit_div2x / sclk_rdiv; + + return sysclk; +} + +static int ov5640_set_night_mode(struct ov5640_dev *sensor) +{ + /* read HTS from register settings */ + u8 mode; + int ret; + + ret = ov5640_read_reg(sensor, OV5640_REG_AEC_CTRL00, &mode); + if (ret) + return ret; + mode &= 0xfb; + return ov5640_write_reg(sensor, OV5640_REG_AEC_CTRL00, mode); +} + +static int ov5640_get_hts(struct ov5640_dev *sensor) +{ + /* read HTS from register settings */ + u16 hts; + int ret; + + ret = ov5640_read_reg16(sensor, OV5640_REG_TIMING_HTS, &hts); + if (ret) + return ret; + return hts; +} + +static int ov5640_get_vts(struct ov5640_dev *sensor) +{ + u16 vts; + int ret; + + ret = ov5640_read_reg16(sensor, OV5640_REG_TIMING_VTS, &vts); + if (ret) + return ret; + return vts; +} + +static int ov5640_set_vts(struct ov5640_dev *sensor, int vts) +{ + return ov5640_write_reg16(sensor, OV5640_REG_TIMING_VTS, vts); +} + +static int ov5640_get_light_freq(struct ov5640_dev *sensor) +{ + /* get banding filter value */ + int ret, light_freq = 0; + u8 temp, temp1; + + ret = ov5640_read_reg(sensor, OV5640_REG_HZ5060_CTRL01, &temp); + if (ret) + return ret; + + if (temp & 0x80) { + /* manual */ + ret = ov5640_read_reg(sensor, OV5640_REG_HZ5060_CTRL00, + &temp1); + if (ret) + return ret; + if (temp1 & 0x04) { + /* 50Hz */ + light_freq = 50; + } else { + /* 60Hz */ + light_freq = 60; + } + } else { + /* auto */ + ret = ov5640_read_reg(sensor, OV5640_REG_SIGMADELTA_CTRL0C, + &temp1); + if (ret) + return ret; + + if (temp1 & 0x01) { + /* 50Hz */ + light_freq = 50; + } else { + /* 60Hz */ + } + } + + return light_freq; +} + +static int ov5640_set_bandingfilter(struct ov5640_dev *sensor) +{ + u32 band_step60, max_band60, band_step50, max_band50, prev_vts; + int ret; + + /* read preview PCLK */ + ret = ov5640_get_sysclk(sensor); + if (ret < 0) + return ret; + if (ret == 0) + return -EINVAL; + sensor->prev_sysclk = ret; + /* read preview HTS */ + ret = ov5640_get_hts(sensor); + if (ret < 0) + return ret; + if (ret == 0) + return -EINVAL; + sensor->prev_hts = ret; + + /* read preview VTS */ + ret = ov5640_get_vts(sensor); + if (ret < 0) + return ret; + prev_vts = ret; + + /* calculate banding filter */ + /* 60Hz */ + band_step60 = sensor->prev_sysclk * 100 / sensor->prev_hts * 100 / 120; + ret = ov5640_write_reg16(sensor, OV5640_REG_AEC_B60_STEP, band_step60); + if (ret) + return ret; + if (!band_step60) + return -EINVAL; + max_band60 = (int)((prev_vts - 4) / band_step60); + ret = ov5640_write_reg(sensor, OV5640_REG_AEC_CTRL0D, max_band60); + if (ret) + return ret; + + /* 50Hz */ + band_step50 = sensor->prev_sysclk * 100 / sensor->prev_hts; + ret = ov5640_write_reg16(sensor, OV5640_REG_AEC_B50_STEP, band_step50); + if (ret) + return ret; + if (!band_step50) + return -EINVAL; + max_band50 = (int)((prev_vts - 4) / band_step50); + return ov5640_write_reg(sensor, OV5640_REG_AEC_CTRL0E, max_band50); +} + +static int ov5640_set_ae_target(struct ov5640_dev *sensor, int target) +{ + /* stable in high */ + u32 fast_high, fast_low; + int ret; + + sensor->ae_low = target * 23 / 25; /* 0.92 */ + sensor->ae_high = target * 27 / 25; /* 1.08 */ + + fast_high = sensor->ae_high << 1; + if (fast_high > 255) + fast_high = 255; + + fast_low = sensor->ae_low >> 1; + + ret = ov5640_write_reg(sensor, OV5640_REG_AEC_CTRL0F, sensor->ae_high); + if (ret) + return ret; + ret = ov5640_write_reg(sensor, OV5640_REG_AEC_CTRL10, sensor->ae_low); + if (ret) + return ret; + ret = ov5640_write_reg(sensor, OV5640_REG_AEC_CTRL1B, sensor->ae_high); + if (ret) + return ret; + ret = ov5640_write_reg(sensor, OV5640_REG_AEC_CTRL1E, sensor->ae_low); + if (ret) + return ret; + ret = ov5640_write_reg(sensor, OV5640_REG_AEC_CTRL11, fast_high); + if (ret) + return ret; + return ov5640_write_reg(sensor, OV5640_REG_AEC_CTRL1F, fast_low); +} + +static int ov5640_get_binning(struct ov5640_dev *sensor) +{ + u8 temp; + int ret; + + ret = ov5640_read_reg(sensor, OV5640_REG_TIMING_TC_REG21, &temp); + if (ret) + return ret; + + return temp & BIT(0); +} + +static int ov5640_set_binning(struct ov5640_dev *sensor, bool enable) +{ + int ret; + + /* + * TIMING TC REG21: + * - [0]: Horizontal binning enable + */ + ret = ov5640_mod_reg(sensor, OV5640_REG_TIMING_TC_REG21, + BIT(0), enable ? BIT(0) : 0); + if (ret) + return ret; + /* + * TIMING TC REG20: + * - [0]: Undocumented, but hardcoded init sequences + * are always setting REG21/REG20 bit 0 to same value... + */ + return ov5640_mod_reg(sensor, OV5640_REG_TIMING_TC_REG20, + BIT(0), enable ? BIT(0) : 0); +} + +static int ov5640_set_virtual_channel(struct ov5640_dev *sensor) +{ + struct i2c_client *client = sensor->i2c_client; + u8 temp, channel = virtual_channel; + int ret; + + if (channel > 3) { + dev_err(&client->dev, + "%s: wrong virtual_channel parameter, expected (0..3), got %d\n", + __func__, channel); + return -EINVAL; + } + + ret = ov5640_read_reg(sensor, OV5640_REG_DEBUG_MODE, &temp); + if (ret) + return ret; + temp &= ~(3 << 6); + temp |= (channel << 6); + return ov5640_write_reg(sensor, OV5640_REG_DEBUG_MODE, temp); +} + +static const struct ov5640_mode_info * +ov5640_find_mode(struct ov5640_dev *sensor, int width, int height, bool nearest) +{ + const struct ov5640_mode_info *mode; + + mode = v4l2_find_nearest_size(ov5640_mode_data, + ARRAY_SIZE(ov5640_mode_data), + width, height, width, height); + + if (!mode || + (!nearest && + (mode->width != width || mode->height != height))) + return NULL; + + return mode; +} + +/* + * sensor changes between scaling and subsampling, go through + * exposure calculation + */ +static int ov5640_set_mode_exposure_calc(struct ov5640_dev *sensor, + const struct ov5640_mode_info *mode) +{ + u32 prev_shutter, prev_gain16; + u32 cap_shutter, cap_gain16; + u32 cap_sysclk, cap_hts, cap_vts; + u32 light_freq, cap_bandfilt, cap_maxband; + u32 cap_gain16_shutter; + u8 average; + int ret; + + if (!mode->reg_data) + return -EINVAL; + + /* read preview shutter */ + ret = ov5640_get_exposure(sensor); + if (ret < 0) + return ret; + prev_shutter = ret; + ret = ov5640_get_binning(sensor); + if (ret < 0) + return ret; + if (ret && mode->id != OV5640_MODE_720P_1280_720 && + mode->id != OV5640_MODE_1080P_1920_1080) + prev_shutter *= 2; + + /* read preview gain */ + ret = ov5640_get_gain(sensor); + if (ret < 0) + return ret; + prev_gain16 = ret; + + /* get average */ + ret = ov5640_read_reg(sensor, OV5640_REG_AVG_READOUT, &average); + if (ret) + return ret; + + /* turn off night mode for capture */ + ret = ov5640_set_night_mode(sensor); + if (ret < 0) + return ret; + + /* Write capture setting */ + ov5640_load_regs(sensor, mode->reg_data, mode->reg_data_size); + ret = ov5640_set_timings(sensor, mode); + if (ret < 0) + return ret; + + /* read capture VTS */ + ret = ov5640_get_vts(sensor); + if (ret < 0) + return ret; + cap_vts = ret; + ret = ov5640_get_hts(sensor); + if (ret < 0) + return ret; + if (ret == 0) + return -EINVAL; + cap_hts = ret; + + ret = ov5640_get_sysclk(sensor); + if (ret < 0) + return ret; + if (ret == 0) + return -EINVAL; + cap_sysclk = ret; + + /* calculate capture banding filter */ + ret = ov5640_get_light_freq(sensor); + if (ret < 0) + return ret; + light_freq = ret; + + if (light_freq == 60) { + /* 60Hz */ + cap_bandfilt = cap_sysclk * 100 / cap_hts * 100 / 120; + } else { + /* 50Hz */ + cap_bandfilt = cap_sysclk * 100 / cap_hts; + } + + if (!sensor->prev_sysclk) { + ret = ov5640_get_sysclk(sensor); + if (ret < 0) + return ret; + if (ret == 0) + return -EINVAL; + sensor->prev_sysclk = ret; + } + + if (!cap_bandfilt) + return -EINVAL; + + cap_maxband = (int)((cap_vts - 4) / cap_bandfilt); + + /* calculate capture shutter/gain16 */ + if (average > sensor->ae_low && average < sensor->ae_high) { + /* in stable range */ + cap_gain16_shutter = + prev_gain16 * prev_shutter * + cap_sysclk / sensor->prev_sysclk * + sensor->prev_hts / cap_hts * + sensor->ae_target / average; + } else { + cap_gain16_shutter = + prev_gain16 * prev_shutter * + cap_sysclk / sensor->prev_sysclk * + sensor->prev_hts / cap_hts; + } + + /* gain to shutter */ + if (cap_gain16_shutter < (cap_bandfilt * 16)) { + /* shutter < 1/100 */ + cap_shutter = cap_gain16_shutter / 16; + if (cap_shutter < 1) + cap_shutter = 1; + + cap_gain16 = cap_gain16_shutter / cap_shutter; + if (cap_gain16 < 16) + cap_gain16 = 16; + } else { + if (cap_gain16_shutter > (cap_bandfilt * cap_maxband * 16)) { + /* exposure reach max */ + cap_shutter = cap_bandfilt * cap_maxband; + if (!cap_shutter) + return -EINVAL; + + cap_gain16 = cap_gain16_shutter / cap_shutter; + } else { + /* 1/100 < (cap_shutter = n/100) =< max */ + cap_shutter = + ((int)(cap_gain16_shutter / 16 / cap_bandfilt)) + * cap_bandfilt; + if (!cap_shutter) + return -EINVAL; + + cap_gain16 = cap_gain16_shutter / cap_shutter; + } + } + + /* set capture gain */ + ret = ov5640_set_gain(sensor, cap_gain16); + if (ret) + return ret; + + /* write capture shutter */ + if (cap_shutter > (cap_vts - 4)) { + cap_vts = cap_shutter + 4; + ret = ov5640_set_vts(sensor, cap_vts); + if (ret < 0) + return ret; + } + + /* set exposure */ + return ov5640_set_exposure(sensor, cap_shutter); +} + +/* + * if sensor changes inside scaling or subsampling + * change mode directly + */ +static int ov5640_set_mode_direct(struct ov5640_dev *sensor, + const struct ov5640_mode_info *mode) +{ + if (!mode->reg_data) + return -EINVAL; + + /* Write capture setting */ + ov5640_load_regs(sensor, mode->reg_data, mode->reg_data_size); + return ov5640_set_timings(sensor, mode); +} + +static int ov5640_set_mode(struct ov5640_dev *sensor) +{ + const struct ov5640_mode_info *mode = sensor->current_mode; + const struct ov5640_mode_info *orig_mode = sensor->last_mode; + enum ov5640_downsize_mode dn_mode, orig_dn_mode; + bool auto_gain = sensor->ctrls.auto_gain->val == 1; + bool auto_exp = sensor->ctrls.auto_exp->val == V4L2_EXPOSURE_AUTO; + int ret; + + dn_mode = mode->dn_mode; + orig_dn_mode = orig_mode->dn_mode; + + /* auto gain and exposure must be turned off when changing modes */ + if (auto_gain) { + ret = ov5640_set_autogain(sensor, false); + if (ret) + return ret; + } + + if (auto_exp) { + ret = ov5640_set_autoexposure(sensor, false); + if (ret) + goto restore_auto_gain; + } + + if (ov5640_is_csi2(sensor)) + ret = ov5640_set_mipi_pclk(sensor); + else + ret = ov5640_set_dvp_pclk(sensor); + if (ret < 0) + return 0; + + if ((dn_mode == SUBSAMPLING && orig_dn_mode == SCALING) || + (dn_mode == SCALING && orig_dn_mode == SUBSAMPLING)) { + /* + * change between subsampling and scaling + * go through exposure calculation + */ + ret = ov5640_set_mode_exposure_calc(sensor, mode); + } else { + /* + * change inside subsampling or scaling + * download firmware directly + */ + ret = ov5640_set_mode_direct(sensor, mode); + } + if (ret < 0) + goto restore_auto_exp_gain; + + /* restore auto gain and exposure */ + if (auto_gain) + ov5640_set_autogain(sensor, true); + if (auto_exp) + ov5640_set_autoexposure(sensor, true); + + ret = ov5640_set_binning(sensor, dn_mode != SCALING); + if (ret < 0) + return ret; + ret = ov5640_set_ae_target(sensor, sensor->ae_target); + if (ret < 0) + return ret; + ret = ov5640_get_light_freq(sensor); + if (ret < 0) + return ret; + ret = ov5640_set_bandingfilter(sensor); + if (ret < 0) + return ret; + ret = ov5640_set_virtual_channel(sensor); + if (ret < 0) + return ret; + + sensor->pending_mode_change = false; + sensor->last_mode = mode; + + return 0; + +restore_auto_exp_gain: + if (auto_exp) + ov5640_set_autoexposure(sensor, true); +restore_auto_gain: + if (auto_gain) + ov5640_set_autogain(sensor, true); + + return ret; +} + +static int ov5640_set_framefmt(struct ov5640_dev *sensor, + struct v4l2_mbus_framefmt *format); + +/* restore the last set video mode after chip power-on */ +static int ov5640_restore_mode(struct ov5640_dev *sensor) +{ + int ret; + + /* first load the initial register values */ + ov5640_load_regs(sensor, ov5640_init_setting, + ARRAY_SIZE(ov5640_init_setting)); + + ret = ov5640_mod_reg(sensor, OV5640_REG_SYS_ROOT_DIVIDER, 0x3f, + (ilog2(OV5640_SCLK2X_ROOT_DIV) << 2) | + ilog2(OV5640_SCLK_ROOT_DIV)); + if (ret) + return ret; + + /* now restore the last capture mode */ + ret = ov5640_set_mode(sensor); + if (ret < 0) + return ret; + + return ov5640_set_framefmt(sensor, &sensor->fmt); +} + +static void ov5640_power(struct ov5640_dev *sensor, bool enable) +{ + gpiod_set_value_cansleep(sensor->pwdn_gpio, enable ? 0 : 1); +} + +/* + * From section 2.7 power up sequence: + * t0 + t1 + t2 >= 5ms Delay from DOVDD stable to PWDN pull down + * t3 >= 1ms Delay from PWDN pull down to RESETB pull up + * t4 >= 20ms Delay from RESETB pull up to SCCB (i2c) stable + * + * Some modules don't expose RESETB/PWDN pins directly, instead providing a + * "PWUP" GPIO which is wired through appropriate delays and inverters to the + * pins. + * + * In such cases, this gpio should be mapped to pwdn_gpio in the driver, and we + * should still toggle the pwdn_gpio below with the appropriate delays, while + * the calls to reset_gpio will be ignored. + */ +static void ov5640_powerup_sequence(struct ov5640_dev *sensor) +{ + if (sensor->pwdn_gpio) { + gpiod_set_value_cansleep(sensor->reset_gpio, 1); + + /* camera power cycle */ + ov5640_power(sensor, false); + usleep_range(5000, 10000); /* t2 */ + ov5640_power(sensor, true); + usleep_range(1000, 2000); /* t3 */ + + gpiod_set_value_cansleep(sensor->reset_gpio, 0); + } else { + /* software reset */ + ov5640_write_reg(sensor, OV5640_REG_SYS_CTRL0, + OV5640_REG_SYS_CTRL0_SW_RST); + } + usleep_range(20000, 25000); /* t4 */ + + /* + * software standby: allows registers programming; + * exit at restore_mode() for CSI, s_stream(1) for DVP + */ + ov5640_write_reg(sensor, OV5640_REG_SYS_CTRL0, + OV5640_REG_SYS_CTRL0_SW_PWDN); +} + +static int ov5640_set_power_on(struct ov5640_dev *sensor) +{ + struct i2c_client *client = sensor->i2c_client; + int ret; + + ret = clk_prepare_enable(sensor->xclk); + if (ret) { + dev_err(&client->dev, "%s: failed to enable clock\n", + __func__); + return ret; + } + + ret = regulator_bulk_enable(OV5640_NUM_SUPPLIES, + sensor->supplies); + if (ret) { + dev_err(&client->dev, "%s: failed to enable regulators\n", + __func__); + goto xclk_off; + } + + ov5640_powerup_sequence(sensor); + + ret = ov5640_init_slave_id(sensor); + if (ret) + goto power_off; + + return 0; + +power_off: + ov5640_power(sensor, false); + regulator_bulk_disable(OV5640_NUM_SUPPLIES, sensor->supplies); +xclk_off: + clk_disable_unprepare(sensor->xclk); + return ret; +} + +static void ov5640_set_power_off(struct ov5640_dev *sensor) +{ + ov5640_power(sensor, false); + regulator_bulk_disable(OV5640_NUM_SUPPLIES, sensor->supplies); + clk_disable_unprepare(sensor->xclk); +} + +static int ov5640_set_power_mipi(struct ov5640_dev *sensor, bool on) +{ + int ret; + + if (!on) { + /* Reset MIPI bus settings to their default values. */ + ov5640_write_reg(sensor, OV5640_REG_IO_MIPI_CTRL00, 0x58); + ov5640_write_reg(sensor, OV5640_REG_MIPI_CTRL00, 0x04); + ov5640_write_reg(sensor, OV5640_REG_PAD_OUTPUT00, 0x00); + return 0; + } + + /* + * Power up MIPI HS Tx and LS Rx; 2 data lanes mode + * + * 0x300e = 0x40 + * [7:5] = 010 : 2 data lanes mode (see FIXME note in + * "ov5640_set_stream_mipi()") + * [4] = 0 : Power up MIPI HS Tx + * [3] = 0 : Power up MIPI LS Rx + * [2] = 1 : MIPI interface enabled + */ + ret = ov5640_write_reg(sensor, OV5640_REG_IO_MIPI_CTRL00, 0x44); + if (ret) + return ret; + + /* + * Gate clock and set LP11 in 'no packets mode' (idle) + * + * 0x4800 = 0x24 + * [5] = 1 : Gate clock when 'no packets' + * [2] = 1 : MIPI bus in LP11 when 'no packets' + */ + ret = ov5640_write_reg(sensor, OV5640_REG_MIPI_CTRL00, 0x24); + if (ret) + return ret; + + /* + * Set data lanes and clock in LP11 when 'sleeping' + * + * 0x3019 = 0x70 + * [6] = 1 : MIPI data lane 2 in LP11 when 'sleeping' + * [5] = 1 : MIPI data lane 1 in LP11 when 'sleeping' + * [4] = 1 : MIPI clock lane in LP11 when 'sleeping' + */ + ret = ov5640_write_reg(sensor, OV5640_REG_PAD_OUTPUT00, 0x70); + if (ret) + return ret; + + /* Give lanes some time to coax into LP11 state. */ + usleep_range(500, 1000); + + return 0; +} + +static int ov5640_set_power_dvp(struct ov5640_dev *sensor, bool on) +{ + unsigned int flags = sensor->ep.bus.parallel.flags; + bool bt656 = sensor->ep.bus_type == V4L2_MBUS_BT656; + u8 polarities = 0; + int ret; + + if (!on) { + /* Reset settings to their default values. */ + ov5640_write_reg(sensor, OV5640_REG_CCIR656_CTRL00, 0x00); + ov5640_write_reg(sensor, OV5640_REG_IO_MIPI_CTRL00, 0x58); + ov5640_write_reg(sensor, OV5640_REG_POLARITY_CTRL00, 0x20); + ov5640_write_reg(sensor, OV5640_REG_PAD_OUTPUT_ENABLE01, 0x00); + ov5640_write_reg(sensor, OV5640_REG_PAD_OUTPUT_ENABLE02, 0x00); + return 0; + } + + /* + * Note about parallel port configuration. + * + * When configured in parallel mode, the OV5640 will + * output 10 bits data on DVP data lines [9:0]. + * If only 8 bits data are wanted, the 8 bits data lines + * of the camera interface must be physically connected + * on the DVP data lines [9:2]. + * + * Control lines polarity can be configured through + * devicetree endpoint control lines properties. + * If no endpoint control lines properties are set, + * polarity will be as below: + * - VSYNC: active high + * - HREF: active low + * - PCLK: active low + * + * VSYNC & HREF are not configured if BT656 bus mode is selected + */ + + /* + * BT656 embedded synchronization configuration + * + * CCIR656 CTRL00 + * - [7]: SYNC code selection (0: auto generate sync code, + * 1: sync code from regs 0x4732-0x4735) + * - [6]: f value in CCIR656 SYNC code when fixed f value + * - [5]: Fixed f value + * - [4:3]: Blank toggle data options (00: data=1'h040/1'h200, + * 01: data from regs 0x4736-0x4738, 10: always keep 0) + * - [1]: Clip data disable + * - [0]: CCIR656 mode enable + * + * Default CCIR656 SAV/EAV mode with default codes + * SAV=0xff000080 & EAV=0xff00009d is enabled here with settings: + * - CCIR656 mode enable + * - auto generation of sync codes + * - blank toggle data 1'h040/1'h200 + * - clip reserved data (0x00 & 0xff changed to 0x01 & 0xfe) + */ + ret = ov5640_write_reg(sensor, OV5640_REG_CCIR656_CTRL00, + bt656 ? 0x01 : 0x00); + if (ret) + return ret; + + /* + * configure parallel port control lines polarity + * + * POLARITY CTRL0 + * - [5]: PCLK polarity (0: active low, 1: active high) + * - [1]: HREF polarity (0: active low, 1: active high) + * - [0]: VSYNC polarity (mismatch here between + * datasheet and hardware, 0 is active high + * and 1 is active low...) + */ + if (!bt656) { + if (flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH) + polarities |= BIT(1); + if (flags & V4L2_MBUS_VSYNC_ACTIVE_LOW) + polarities |= BIT(0); + } + if (flags & V4L2_MBUS_PCLK_SAMPLE_RISING) + polarities |= BIT(5); + + ret = ov5640_write_reg(sensor, OV5640_REG_POLARITY_CTRL00, polarities); + if (ret) + return ret; + + /* + * powerdown MIPI TX/RX PHY & enable DVP + * + * MIPI CONTROL 00 + * [4] = 1 : Power down MIPI HS Tx + * [3] = 1 : Power down MIPI LS Rx + * [2] = 0 : DVP enable (MIPI disable) + */ + ret = ov5640_write_reg(sensor, OV5640_REG_IO_MIPI_CTRL00, 0x18); + if (ret) + return ret; + + /* + * enable VSYNC/HREF/PCLK DVP control lines + * & D[9:6] DVP data lines + * + * PAD OUTPUT ENABLE 01 + * - 6: VSYNC output enable + * - 5: HREF output enable + * - 4: PCLK output enable + * - [3:0]: D[9:6] output enable + */ + ret = ov5640_write_reg(sensor, OV5640_REG_PAD_OUTPUT_ENABLE01, + bt656 ? 0x1f : 0x7f); + if (ret) + return ret; + + /* + * enable D[5:0] DVP data lines + * + * PAD OUTPUT ENABLE 02 + * - [7:2]: D[5:0] output enable + */ + return ov5640_write_reg(sensor, OV5640_REG_PAD_OUTPUT_ENABLE02, 0xfc); +} + +static int ov5640_set_power(struct ov5640_dev *sensor, bool on) +{ + int ret = 0; + + if (on) { + ret = ov5640_set_power_on(sensor); + if (ret) + return ret; + + ret = ov5640_restore_mode(sensor); + if (ret) + goto power_off; + } + + if (sensor->ep.bus_type == V4L2_MBUS_CSI2_DPHY) + ret = ov5640_set_power_mipi(sensor, on); + else + ret = ov5640_set_power_dvp(sensor, on); + if (ret) + goto power_off; + + if (!on) + ov5640_set_power_off(sensor); + + return 0; + +power_off: + ov5640_set_power_off(sensor); + return ret; +} + +static int ov5640_sensor_suspend(struct device *dev) +{ + struct v4l2_subdev *sd = dev_get_drvdata(dev); + struct ov5640_dev *ov5640 = to_ov5640_dev(sd); + + return ov5640_set_power(ov5640, false); +} + +static int ov5640_sensor_resume(struct device *dev) +{ + struct v4l2_subdev *sd = dev_get_drvdata(dev); + struct ov5640_dev *ov5640 = to_ov5640_dev(sd); + + return ov5640_set_power(ov5640, true); +} + +/* --------------- Subdev Operations --------------- */ + +static int ov5640_try_frame_interval(struct ov5640_dev *sensor, + struct v4l2_fract *fi, + u32 width, u32 height) +{ + const struct ov5640_mode_info *mode; + enum ov5640_frame_rate rate = OV5640_15_FPS; + int minfps, maxfps, best_fps, fps; + int i; + + minfps = ov5640_framerates[OV5640_15_FPS]; + maxfps = ov5640_framerates[OV5640_60_FPS]; + + if (fi->numerator == 0) { + fi->denominator = maxfps; + fi->numerator = 1; + rate = OV5640_60_FPS; + goto find_mode; + } + + fps = clamp_val(DIV_ROUND_CLOSEST(fi->denominator, fi->numerator), + minfps, maxfps); + + best_fps = minfps; + for (i = 0; i < ARRAY_SIZE(ov5640_framerates); i++) { + int curr_fps = ov5640_framerates[i]; + + if (abs(curr_fps - fps) < abs(best_fps - fps)) { + best_fps = curr_fps; + rate = i; + } + } + + fi->numerator = 1; + fi->denominator = best_fps; + +find_mode: + mode = ov5640_find_mode(sensor, width, height, false); + return mode ? rate : -EINVAL; +} + +static int ov5640_get_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_format *format) +{ + struct ov5640_dev *sensor = to_ov5640_dev(sd); + struct v4l2_mbus_framefmt *fmt; + + if (format->pad != 0) + return -EINVAL; + + mutex_lock(&sensor->lock); + + if (format->which == V4L2_SUBDEV_FORMAT_TRY) + fmt = v4l2_subdev_get_try_format(&sensor->sd, sd_state, + format->pad); + else + fmt = &sensor->fmt; + + format->format = *fmt; + + mutex_unlock(&sensor->lock); + + return 0; +} + +static int ov5640_try_fmt_internal(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *fmt, + enum ov5640_frame_rate fr, + const struct ov5640_mode_info **new_mode) +{ + struct ov5640_dev *sensor = to_ov5640_dev(sd); + const struct ov5640_mode_info *mode; + const struct ov5640_pixfmt *pixfmt; + unsigned int bpp; + + mode = ov5640_find_mode(sensor, fmt->width, fmt->height, true); + if (!mode) + return -EINVAL; + + pixfmt = ov5640_code_to_pixfmt(sensor, fmt->code); + bpp = pixfmt->bpp; + + /* + * Adjust mode according to bpp: + * - 8bpp modes work for resolution >= 1280x720 + * - 24bpp modes work resolution < 1280x720 + */ + if (bpp == 8 && mode->width < 1280) + mode = &ov5640_mode_data[OV5640_MODE_720P_1280_720]; + else if (bpp == 24 && mode->width > 1024) + mode = &ov5640_mode_data[OV5640_MODE_XGA_1024_768]; + + fmt->width = mode->width; + fmt->height = mode->height; + + if (new_mode) + *new_mode = mode; + + fmt->code = pixfmt->code; + fmt->colorspace = pixfmt->colorspace; + fmt->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(fmt->colorspace); + fmt->quantization = V4L2_QUANTIZATION_FULL_RANGE; + fmt->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(fmt->colorspace); + + return 0; +} + +static void __v4l2_ctrl_vblank_update(struct ov5640_dev *sensor, u32 vblank) +{ + const struct ov5640_mode_info *mode = sensor->current_mode; + + __v4l2_ctrl_modify_range(sensor->ctrls.vblank, OV5640_MIN_VBLANK, + OV5640_MAX_VTS - mode->height, 1, vblank); + + __v4l2_ctrl_s_ctrl(sensor->ctrls.vblank, vblank); +} + +static int ov5640_update_pixel_rate(struct ov5640_dev *sensor) +{ + const struct ov5640_mode_info *mode = sensor->current_mode; + enum ov5640_pixel_rate_id pixel_rate_id = mode->pixel_rate; + struct v4l2_mbus_framefmt *fmt = &sensor->fmt; + const struct ov5640_timings *timings = ov5640_timings(sensor, mode); + s32 exposure_val, exposure_max; + unsigned int hblank; + unsigned int i = 0; + u32 pixel_rate; + s64 link_freq; + u32 num_lanes; + u32 vblank; + u32 bpp; + + /* + * Update the pixel rate control value. + * + * For DVP mode, maintain the pixel rate calculation using fixed FPS. + */ + if (!ov5640_is_csi2(sensor)) { + __v4l2_ctrl_s_ctrl_int64(sensor->ctrls.pixel_rate, + ov5640_calc_pixel_rate(sensor)); + + __v4l2_ctrl_vblank_update(sensor, timings->vblank_def); + + return 0; + } + + /* + * The MIPI CSI-2 link frequency should comply with the CSI-2 + * specification and be lower than 1GHz. + * + * Start from the suggested pixel_rate for the current mode and + * progressively slow it down if it exceeds 1GHz. + */ + num_lanes = sensor->ep.bus.mipi_csi2.num_data_lanes; + bpp = ov5640_code_to_bpp(sensor, fmt->code); + do { + pixel_rate = ov5640_pixel_rates[pixel_rate_id]; + link_freq = pixel_rate * bpp / (2 * num_lanes); + } while (link_freq >= 1000000000U && + ++pixel_rate_id < OV5640_NUM_PIXEL_RATES); + + sensor->current_link_freq = link_freq; + + /* + * Higher link rates require the clock tree to be programmed with + * 'mipi_div' = 1; this has the effect of halving the actual output + * pixel rate in the MIPI domain. + * + * Adjust the pixel rate and link frequency control value to report it + * correctly to userspace. + */ + if (link_freq > OV5640_LINK_RATE_MAX) { + pixel_rate /= 2; + link_freq /= 2; + } + + for (i = 0; i < ARRAY_SIZE(ov5640_csi2_link_freqs); ++i) { + if (ov5640_csi2_link_freqs[i] == link_freq) + break; + } + WARN_ON(i == ARRAY_SIZE(ov5640_csi2_link_freqs)); + + __v4l2_ctrl_s_ctrl_int64(sensor->ctrls.pixel_rate, pixel_rate); + __v4l2_ctrl_s_ctrl(sensor->ctrls.link_freq, i); + + hblank = timings->htot - mode->width; + __v4l2_ctrl_modify_range(sensor->ctrls.hblank, + hblank, hblank, 1, hblank); + + vblank = timings->vblank_def; + __v4l2_ctrl_vblank_update(sensor, vblank); + + exposure_max = timings->crop.height + vblank - 4; + exposure_val = clamp_t(s32, sensor->ctrls.exposure->val, + sensor->ctrls.exposure->minimum, + exposure_max); + + __v4l2_ctrl_modify_range(sensor->ctrls.exposure, + sensor->ctrls.exposure->minimum, + exposure_max, 1, exposure_val); + + return 0; +} + +static int ov5640_set_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_format *format) +{ + struct ov5640_dev *sensor = to_ov5640_dev(sd); + const struct ov5640_mode_info *new_mode; + struct v4l2_mbus_framefmt *mbus_fmt = &format->format; + int ret; + + if (format->pad != 0) + return -EINVAL; + + mutex_lock(&sensor->lock); + + if (sensor->streaming) { + ret = -EBUSY; + goto out; + } + + ret = ov5640_try_fmt_internal(sd, mbus_fmt, + sensor->current_fr, &new_mode); + if (ret) + goto out; + + if (format->which == V4L2_SUBDEV_FORMAT_TRY) { + *v4l2_subdev_get_try_format(sd, sd_state, 0) = *mbus_fmt; + goto out; + } + + if (new_mode != sensor->current_mode) { + sensor->current_fr = new_mode->def_fps; + sensor->current_mode = new_mode; + sensor->pending_mode_change = true; + } + if (mbus_fmt->code != sensor->fmt.code) + sensor->pending_fmt_change = true; + + /* update format even if code is unchanged, resolution might change */ + sensor->fmt = *mbus_fmt; + + ov5640_update_pixel_rate(sensor); + +out: + mutex_unlock(&sensor->lock); + return ret; +} + +static int ov5640_get_selection(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_selection *sel) +{ + struct ov5640_dev *sensor = to_ov5640_dev(sd); + const struct ov5640_mode_info *mode = sensor->current_mode; + const struct ov5640_timings *timings; + + switch (sel->target) { + case V4L2_SEL_TGT_CROP: { + mutex_lock(&sensor->lock); + timings = ov5640_timings(sensor, mode); + sel->r = timings->analog_crop; + mutex_unlock(&sensor->lock); + + return 0; + } + + case V4L2_SEL_TGT_NATIVE_SIZE: + case V4L2_SEL_TGT_CROP_BOUNDS: + sel->r.top = 0; + sel->r.left = 0; + sel->r.width = OV5640_NATIVE_WIDTH; + sel->r.height = OV5640_NATIVE_HEIGHT; + + return 0; + + case V4L2_SEL_TGT_CROP_DEFAULT: + sel->r.top = OV5640_PIXEL_ARRAY_TOP; + sel->r.left = OV5640_PIXEL_ARRAY_LEFT; + sel->r.width = OV5640_PIXEL_ARRAY_WIDTH; + sel->r.height = OV5640_PIXEL_ARRAY_HEIGHT; + + return 0; + } + + return -EINVAL; +} + +static int ov5640_set_framefmt(struct ov5640_dev *sensor, + struct v4l2_mbus_framefmt *format) +{ + bool is_jpeg = format->code == MEDIA_BUS_FMT_JPEG_1X8; + const struct ov5640_pixfmt *pixfmt; + int ret = 0; + + pixfmt = ov5640_code_to_pixfmt(sensor, format->code); + + /* FORMAT CONTROL00: YUV and RGB formatting */ + ret = ov5640_write_reg(sensor, OV5640_REG_FORMAT_CONTROL00, + pixfmt->ctrl00); + if (ret) + return ret; + + /* FORMAT MUX CONTROL: ISP YUV or RGB */ + ret = ov5640_write_reg(sensor, OV5640_REG_ISP_FORMAT_MUX_CTRL, + pixfmt->mux); + if (ret) + return ret; + + /* + * TIMING TC REG21: + * - [5]: JPEG enable + */ + ret = ov5640_mod_reg(sensor, OV5640_REG_TIMING_TC_REG21, + BIT(5), is_jpeg ? BIT(5) : 0); + if (ret) + return ret; + + /* + * SYSTEM RESET02: + * - [4]: Reset JFIFO + * - [3]: Reset SFIFO + * - [2]: Reset JPEG + */ + ret = ov5640_mod_reg(sensor, OV5640_REG_SYS_RESET02, + BIT(4) | BIT(3) | BIT(2), + is_jpeg ? 0 : (BIT(4) | BIT(3) | BIT(2))); + if (ret) + return ret; + + /* + * CLOCK ENABLE02: + * - [5]: Enable JPEG 2x clock + * - [3]: Enable JPEG clock + */ + return ov5640_mod_reg(sensor, OV5640_REG_SYS_CLOCK_ENABLE02, + BIT(5) | BIT(3), + is_jpeg ? (BIT(5) | BIT(3)) : 0); +} + +/* + * Sensor Controls. + */ + +static int ov5640_set_ctrl_hue(struct ov5640_dev *sensor, int value) +{ + int ret; + + if (value) { + ret = ov5640_mod_reg(sensor, OV5640_REG_SDE_CTRL0, + BIT(0), BIT(0)); + if (ret) + return ret; + ret = ov5640_write_reg16(sensor, OV5640_REG_SDE_CTRL1, value); + } else { + ret = ov5640_mod_reg(sensor, OV5640_REG_SDE_CTRL0, BIT(0), 0); + } + + return ret; +} + +static int ov5640_set_ctrl_contrast(struct ov5640_dev *sensor, int value) +{ + int ret; + + if (value) { + ret = ov5640_mod_reg(sensor, OV5640_REG_SDE_CTRL0, + BIT(2), BIT(2)); + if (ret) + return ret; + ret = ov5640_write_reg(sensor, OV5640_REG_SDE_CTRL5, + value & 0xff); + } else { + ret = ov5640_mod_reg(sensor, OV5640_REG_SDE_CTRL0, BIT(2), 0); + } + + return ret; +} + +static int ov5640_set_ctrl_saturation(struct ov5640_dev *sensor, int value) +{ + int ret; + + if (value) { + ret = ov5640_mod_reg(sensor, OV5640_REG_SDE_CTRL0, + BIT(1), BIT(1)); + if (ret) + return ret; + ret = ov5640_write_reg(sensor, OV5640_REG_SDE_CTRL3, + value & 0xff); + if (ret) + return ret; + ret = ov5640_write_reg(sensor, OV5640_REG_SDE_CTRL4, + value & 0xff); + } else { + ret = ov5640_mod_reg(sensor, OV5640_REG_SDE_CTRL0, BIT(1), 0); + } + + return ret; +} + +static int ov5640_set_ctrl_white_balance(struct ov5640_dev *sensor, int awb) +{ + int ret; + + ret = ov5640_mod_reg(sensor, OV5640_REG_AWB_MANUAL_CTRL, + BIT(0), awb ? 0 : 1); + if (ret) + return ret; + + if (!awb) { + u16 red = (u16)sensor->ctrls.red_balance->val; + u16 blue = (u16)sensor->ctrls.blue_balance->val; + + ret = ov5640_write_reg16(sensor, OV5640_REG_AWB_R_GAIN, red); + if (ret) + return ret; + ret = ov5640_write_reg16(sensor, OV5640_REG_AWB_B_GAIN, blue); + } + + return ret; +} + +static int ov5640_set_ctrl_exposure(struct ov5640_dev *sensor, + enum v4l2_exposure_auto_type auto_exposure) +{ + struct ov5640_ctrls *ctrls = &sensor->ctrls; + bool auto_exp = (auto_exposure == V4L2_EXPOSURE_AUTO); + int ret = 0; + + if (ctrls->auto_exp->is_new) { + ret = ov5640_set_autoexposure(sensor, auto_exp); + if (ret) + return ret; + } + + if (!auto_exp && ctrls->exposure->is_new) { + u16 max_exp; + + ret = ov5640_read_reg16(sensor, OV5640_REG_AEC_PK_VTS, + &max_exp); + if (ret) + return ret; + ret = ov5640_get_vts(sensor); + if (ret < 0) + return ret; + max_exp += ret; + ret = 0; + + if (ctrls->exposure->val < max_exp) + ret = ov5640_set_exposure(sensor, ctrls->exposure->val); + } + + return ret; +} + +static int ov5640_set_ctrl_gain(struct ov5640_dev *sensor, bool auto_gain) +{ + struct ov5640_ctrls *ctrls = &sensor->ctrls; + int ret = 0; + + if (ctrls->auto_gain->is_new) { + ret = ov5640_set_autogain(sensor, auto_gain); + if (ret) + return ret; + } + + if (!auto_gain && ctrls->gain->is_new) + ret = ov5640_set_gain(sensor, ctrls->gain->val); + + return ret; +} + +static const char * const test_pattern_menu[] = { + "Disabled", + "Color bars", + "Color bars w/ rolling bar", + "Color squares", + "Color squares w/ rolling bar", +}; + +#define OV5640_TEST_ENABLE BIT(7) +#define OV5640_TEST_ROLLING BIT(6) /* rolling horizontal bar */ +#define OV5640_TEST_TRANSPARENT BIT(5) +#define OV5640_TEST_SQUARE_BW BIT(4) /* black & white squares */ +#define OV5640_TEST_BAR_STANDARD (0 << 2) +#define OV5640_TEST_BAR_VERT_CHANGE_1 (1 << 2) +#define OV5640_TEST_BAR_HOR_CHANGE (2 << 2) +#define OV5640_TEST_BAR_VERT_CHANGE_2 (3 << 2) +#define OV5640_TEST_BAR (0 << 0) +#define OV5640_TEST_RANDOM (1 << 0) +#define OV5640_TEST_SQUARE (2 << 0) +#define OV5640_TEST_BLACK (3 << 0) + +static const u8 test_pattern_val[] = { + 0, + OV5640_TEST_ENABLE | OV5640_TEST_BAR_VERT_CHANGE_1 | + OV5640_TEST_BAR, + OV5640_TEST_ENABLE | OV5640_TEST_ROLLING | + OV5640_TEST_BAR_VERT_CHANGE_1 | OV5640_TEST_BAR, + OV5640_TEST_ENABLE | OV5640_TEST_SQUARE, + OV5640_TEST_ENABLE | OV5640_TEST_ROLLING | OV5640_TEST_SQUARE, +}; + +static int ov5640_set_ctrl_test_pattern(struct ov5640_dev *sensor, int value) +{ + return ov5640_write_reg(sensor, OV5640_REG_PRE_ISP_TEST_SET1, + test_pattern_val[value]); +} + +static int ov5640_set_ctrl_light_freq(struct ov5640_dev *sensor, int value) +{ + int ret; + + ret = ov5640_mod_reg(sensor, OV5640_REG_HZ5060_CTRL01, BIT(7), + (value == V4L2_CID_POWER_LINE_FREQUENCY_AUTO) ? + 0 : BIT(7)); + if (ret) + return ret; + + return ov5640_mod_reg(sensor, OV5640_REG_HZ5060_CTRL00, BIT(2), + (value == V4L2_CID_POWER_LINE_FREQUENCY_50HZ) ? + BIT(2) : 0); +} + +static int ov5640_set_ctrl_hflip(struct ov5640_dev *sensor, int value) +{ + /* + * If sensor is mounted upside down, mirror logic is inversed. + * + * Sensor is a BSI (Back Side Illuminated) one, + * so image captured is physically mirrored. + * This is why mirror logic is inversed in + * order to cancel this mirror effect. + */ + + /* + * TIMING TC REG21: + * - [2]: ISP mirror + * - [1]: Sensor mirror + */ + return ov5640_mod_reg(sensor, OV5640_REG_TIMING_TC_REG21, + BIT(2) | BIT(1), + (!(value ^ sensor->upside_down)) ? + (BIT(2) | BIT(1)) : 0); +} + +static int ov5640_set_ctrl_vflip(struct ov5640_dev *sensor, int value) +{ + /* If sensor is mounted upside down, flip logic is inversed */ + + /* + * TIMING TC REG20: + * - [2]: ISP vflip + * - [1]: Sensor vflip + */ + return ov5640_mod_reg(sensor, OV5640_REG_TIMING_TC_REG20, + BIT(2) | BIT(1), + (value ^ sensor->upside_down) ? + (BIT(2) | BIT(1)) : 0); +} + +static int ov5640_set_ctrl_vblank(struct ov5640_dev *sensor, int value) +{ + const struct ov5640_mode_info *mode = sensor->current_mode; + + /* Update the VTOT timing register value. */ + return ov5640_write_reg16(sensor, OV5640_REG_TIMING_VTS, + mode->height + value); +} + +static int ov5640_g_volatile_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = ctrl_to_sd(ctrl); + struct ov5640_dev *sensor = to_ov5640_dev(sd); + int val; + + /* v4l2_ctrl_lock() locks our own mutex */ + + if (!pm_runtime_get_if_in_use(&sensor->i2c_client->dev)) + return 0; + + switch (ctrl->id) { + case V4L2_CID_AUTOGAIN: + val = ov5640_get_gain(sensor); + if (val < 0) + return val; + sensor->ctrls.gain->val = val; + break; + case V4L2_CID_EXPOSURE_AUTO: + val = ov5640_get_exposure(sensor); + if (val < 0) + return val; + sensor->ctrls.exposure->val = val; + break; + } + + pm_runtime_put_autosuspend(&sensor->i2c_client->dev); + + return 0; +} + +static int ov5640_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = ctrl_to_sd(ctrl); + struct ov5640_dev *sensor = to_ov5640_dev(sd); + const struct ov5640_mode_info *mode = sensor->current_mode; + const struct ov5640_timings *timings; + unsigned int exp_max; + int ret; + + /* v4l2_ctrl_lock() locks our own mutex */ + + switch (ctrl->id) { + case V4L2_CID_VBLANK: + /* Update the exposure range to the newly programmed vblank. */ + timings = ov5640_timings(sensor, mode); + exp_max = mode->height + ctrl->val - 4; + __v4l2_ctrl_modify_range(sensor->ctrls.exposure, + sensor->ctrls.exposure->minimum, + exp_max, sensor->ctrls.exposure->step, + timings->vblank_def); + break; + } + + /* + * If the device is not powered up by the host driver do + * not apply any controls to H/W at this time. Instead + * the controls will be restored at start streaming time. + */ + if (!pm_runtime_get_if_in_use(&sensor->i2c_client->dev)) + return 0; + + switch (ctrl->id) { + case V4L2_CID_AUTOGAIN: + ret = ov5640_set_ctrl_gain(sensor, ctrl->val); + break; + case V4L2_CID_EXPOSURE_AUTO: + ret = ov5640_set_ctrl_exposure(sensor, ctrl->val); + break; + case V4L2_CID_AUTO_WHITE_BALANCE: + ret = ov5640_set_ctrl_white_balance(sensor, ctrl->val); + break; + case V4L2_CID_HUE: + ret = ov5640_set_ctrl_hue(sensor, ctrl->val); + break; + case V4L2_CID_CONTRAST: + ret = ov5640_set_ctrl_contrast(sensor, ctrl->val); + break; + case V4L2_CID_SATURATION: + ret = ov5640_set_ctrl_saturation(sensor, ctrl->val); + break; + case V4L2_CID_TEST_PATTERN: + ret = ov5640_set_ctrl_test_pattern(sensor, ctrl->val); + break; + case V4L2_CID_POWER_LINE_FREQUENCY: + ret = ov5640_set_ctrl_light_freq(sensor, ctrl->val); + break; + case V4L2_CID_HFLIP: + ret = ov5640_set_ctrl_hflip(sensor, ctrl->val); + break; + case V4L2_CID_VFLIP: + ret = ov5640_set_ctrl_vflip(sensor, ctrl->val); + break; + case V4L2_CID_VBLANK: + ret = ov5640_set_ctrl_vblank(sensor, ctrl->val); + break; + default: + ret = -EINVAL; + break; + } + + pm_runtime_put_autosuspend(&sensor->i2c_client->dev); + + return ret; +} + +static const struct v4l2_ctrl_ops ov5640_ctrl_ops = { + .g_volatile_ctrl = ov5640_g_volatile_ctrl, + .s_ctrl = ov5640_s_ctrl, +}; + +static int ov5640_init_controls(struct ov5640_dev *sensor) +{ + const struct ov5640_mode_info *mode = sensor->current_mode; + const struct v4l2_ctrl_ops *ops = &ov5640_ctrl_ops; + struct ov5640_ctrls *ctrls = &sensor->ctrls; + struct v4l2_ctrl_handler *hdl = &ctrls->handler; + struct v4l2_fwnode_device_properties props; + const struct ov5640_timings *timings; + unsigned int max_vblank; + unsigned int hblank; + int ret; + + v4l2_ctrl_handler_init(hdl, 32); + + /* we can use our own mutex for the ctrl lock */ + hdl->lock = &sensor->lock; + + /* Clock related controls */ + ctrls->pixel_rate = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_PIXEL_RATE, + ov5640_pixel_rates[OV5640_NUM_PIXEL_RATES - 1], + ov5640_pixel_rates[0], 1, + ov5640_pixel_rates[mode->pixel_rate]); + + ctrls->link_freq = v4l2_ctrl_new_int_menu(hdl, ops, + V4L2_CID_LINK_FREQ, + ARRAY_SIZE(ov5640_csi2_link_freqs) - 1, + OV5640_DEFAULT_LINK_FREQ, + ov5640_csi2_link_freqs); + + timings = ov5640_timings(sensor, mode); + hblank = timings->htot - mode->width; + ctrls->hblank = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_HBLANK, hblank, + hblank, 1, hblank); + + max_vblank = OV5640_MAX_VTS - mode->height; + ctrls->vblank = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_VBLANK, + OV5640_MIN_VBLANK, max_vblank, + 1, timings->vblank_def); + + /* Auto/manual white balance */ + ctrls->auto_wb = v4l2_ctrl_new_std(hdl, ops, + V4L2_CID_AUTO_WHITE_BALANCE, + 0, 1, 1, 1); + ctrls->blue_balance = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_BLUE_BALANCE, + 0, 4095, 1, 0); + ctrls->red_balance = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_RED_BALANCE, + 0, 4095, 1, 0); + /* Auto/manual exposure */ + ctrls->auto_exp = v4l2_ctrl_new_std_menu(hdl, ops, + V4L2_CID_EXPOSURE_AUTO, + V4L2_EXPOSURE_MANUAL, 0, + V4L2_EXPOSURE_AUTO); + ctrls->exposure = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_EXPOSURE, + 0, 65535, 1, 0); + /* Auto/manual gain */ + ctrls->auto_gain = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_AUTOGAIN, + 0, 1, 1, 1); + ctrls->gain = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_ANALOGUE_GAIN, + 0, 1023, 1, 0); + + ctrls->saturation = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_SATURATION, + 0, 255, 1, 64); + ctrls->hue = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_HUE, + 0, 359, 1, 0); + ctrls->contrast = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_CONTRAST, + 0, 255, 1, 0); + ctrls->test_pattern = + v4l2_ctrl_new_std_menu_items(hdl, ops, V4L2_CID_TEST_PATTERN, + ARRAY_SIZE(test_pattern_menu) - 1, + 0, 0, test_pattern_menu); + ctrls->hflip = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_HFLIP, + 0, 1, 1, 0); + ctrls->vflip = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_VFLIP, + 0, 1, 1, 0); + + ctrls->light_freq = + v4l2_ctrl_new_std_menu(hdl, ops, + V4L2_CID_POWER_LINE_FREQUENCY, + V4L2_CID_POWER_LINE_FREQUENCY_AUTO, 0, + V4L2_CID_POWER_LINE_FREQUENCY_50HZ); + + if (hdl->error) { + ret = hdl->error; + goto free_ctrls; + } + + ret = v4l2_fwnode_device_parse(&sensor->i2c_client->dev, &props); + if (ret) + goto free_ctrls; + + if (props.rotation == 180) + sensor->upside_down = true; + + ret = v4l2_ctrl_new_fwnode_properties(hdl, ops, &props); + if (ret) + goto free_ctrls; + + ctrls->pixel_rate->flags |= V4L2_CTRL_FLAG_READ_ONLY; + ctrls->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY; + ctrls->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY; + ctrls->gain->flags |= V4L2_CTRL_FLAG_VOLATILE; + ctrls->exposure->flags |= V4L2_CTRL_FLAG_VOLATILE; + + v4l2_ctrl_auto_cluster(3, &ctrls->auto_wb, 0, false); + v4l2_ctrl_auto_cluster(2, &ctrls->auto_gain, 0, true); + v4l2_ctrl_auto_cluster(2, &ctrls->auto_exp, 1, true); + + sensor->sd.ctrl_handler = hdl; + return 0; + +free_ctrls: + v4l2_ctrl_handler_free(hdl); + return ret; +} + +static int ov5640_enum_frame_size(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_frame_size_enum *fse) +{ + struct ov5640_dev *sensor = to_ov5640_dev(sd); + u32 bpp = ov5640_code_to_bpp(sensor, fse->code); + unsigned int index = fse->index; + + if (fse->pad != 0) + return -EINVAL; + if (!bpp) + return -EINVAL; + + /* Only low-resolution modes are supported for 24bpp formats. */ + if (bpp == 24 && index >= OV5640_MODE_720P_1280_720) + return -EINVAL; + + /* FIXME: Low resolution modes don't work in 8bpp formats. */ + if (bpp == 8) + index += OV5640_MODE_720P_1280_720; + + if (index >= OV5640_NUM_MODES) + return -EINVAL; + + fse->min_width = ov5640_mode_data[index].width; + fse->max_width = fse->min_width; + fse->min_height = ov5640_mode_data[index].height; + fse->max_height = fse->min_height; + + return 0; +} + +static int ov5640_enum_frame_interval( + struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_frame_interval_enum *fie) +{ + struct ov5640_dev *sensor = to_ov5640_dev(sd); + struct v4l2_fract tpf; + int ret; + + if (fie->pad != 0) + return -EINVAL; + if (fie->index >= OV5640_NUM_FRAMERATES) + return -EINVAL; + + tpf.numerator = 1; + tpf.denominator = ov5640_framerates[fie->index]; + + ret = ov5640_try_frame_interval(sensor, &tpf, + fie->width, fie->height); + if (ret < 0) + return -EINVAL; + + fie->interval = tpf; + return 0; +} + +static int ov5640_g_frame_interval(struct v4l2_subdev *sd, + struct v4l2_subdev_frame_interval *fi) +{ + struct ov5640_dev *sensor = to_ov5640_dev(sd); + + mutex_lock(&sensor->lock); + fi->interval = sensor->frame_interval; + mutex_unlock(&sensor->lock); + + return 0; +} + +static int ov5640_s_frame_interval(struct v4l2_subdev *sd, + struct v4l2_subdev_frame_interval *fi) +{ + struct ov5640_dev *sensor = to_ov5640_dev(sd); + const struct ov5640_mode_info *mode; + int frame_rate, ret = 0; + + if (fi->pad != 0) + return -EINVAL; + + mutex_lock(&sensor->lock); + + if (sensor->streaming) { + ret = -EBUSY; + goto out; + } + + mode = sensor->current_mode; + + frame_rate = ov5640_try_frame_interval(sensor, &fi->interval, + mode->width, + mode->height); + if (frame_rate < 0) { + /* Always return a valid frame interval value */ + fi->interval = sensor->frame_interval; + goto out; + } + + mode = ov5640_find_mode(sensor, mode->width, mode->height, true); + if (!mode) { + ret = -EINVAL; + goto out; + } + + if (ov5640_framerates[frame_rate] > ov5640_framerates[mode->max_fps]) { + ret = -EINVAL; + goto out; + } + + if (mode != sensor->current_mode || + frame_rate != sensor->current_fr) { + sensor->current_fr = frame_rate; + sensor->frame_interval = fi->interval; + sensor->current_mode = mode; + sensor->pending_mode_change = true; + + ov5640_update_pixel_rate(sensor); + } +out: + mutex_unlock(&sensor->lock); + return ret; +} + +static int ov5640_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_mbus_code_enum *code) +{ + struct ov5640_dev *sensor = to_ov5640_dev(sd); + const struct ov5640_pixfmt *formats; + unsigned int num_formats; + + if (ov5640_is_csi2(sensor)) { + formats = ov5640_csi2_formats; + num_formats = ARRAY_SIZE(ov5640_csi2_formats) - 1; + } else { + formats = ov5640_dvp_formats; + num_formats = ARRAY_SIZE(ov5640_dvp_formats) - 1; + } + + if (code->index >= num_formats) + return -EINVAL; + + code->code = formats[code->index].code; + + return 0; +} + +static int ov5640_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct ov5640_dev *sensor = to_ov5640_dev(sd); + int ret = 0; + + if (enable) { + ret = pm_runtime_resume_and_get(&sensor->i2c_client->dev); + if (ret < 0) + return ret; + + ret = v4l2_ctrl_handler_setup(&sensor->ctrls.handler); + if (ret) { + pm_runtime_put(&sensor->i2c_client->dev); + return ret; + } + } + + mutex_lock(&sensor->lock); + + if (sensor->streaming == !enable) { + if (enable && sensor->pending_mode_change) { + ret = ov5640_set_mode(sensor); + if (ret) + goto out; + } + + if (enable && sensor->pending_fmt_change) { + ret = ov5640_set_framefmt(sensor, &sensor->fmt); + if (ret) + goto out; + sensor->pending_fmt_change = false; + } + + if (ov5640_is_csi2(sensor)) + ret = ov5640_set_stream_mipi(sensor, enable); + else + ret = ov5640_set_stream_dvp(sensor, enable); + + if (!ret) + sensor->streaming = enable; + } + +out: + mutex_unlock(&sensor->lock); + + if (!enable || ret) + pm_runtime_put_autosuspend(&sensor->i2c_client->dev); + + return ret; +} + +static int ov5640_init_cfg(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state) +{ + struct v4l2_mbus_framefmt *fmt = + v4l2_subdev_get_try_format(sd, state, 0); + struct v4l2_rect *crop = v4l2_subdev_get_try_crop(sd, state, 0); + + *fmt = ov5640_default_fmt; + + crop->left = OV5640_PIXEL_ARRAY_LEFT; + crop->top = OV5640_PIXEL_ARRAY_TOP; + crop->width = OV5640_PIXEL_ARRAY_WIDTH; + crop->height = OV5640_PIXEL_ARRAY_HEIGHT; + + return 0; +} + +static const struct v4l2_subdev_core_ops ov5640_core_ops = { + .log_status = v4l2_ctrl_subdev_log_status, + .subscribe_event = v4l2_ctrl_subdev_subscribe_event, + .unsubscribe_event = v4l2_event_subdev_unsubscribe, +}; + +static const struct v4l2_subdev_video_ops ov5640_video_ops = { + .g_frame_interval = ov5640_g_frame_interval, + .s_frame_interval = ov5640_s_frame_interval, + .s_stream = ov5640_s_stream, +}; + +static const struct v4l2_subdev_pad_ops ov5640_pad_ops = { + .init_cfg = ov5640_init_cfg, + .enum_mbus_code = ov5640_enum_mbus_code, + .get_fmt = ov5640_get_fmt, + .set_fmt = ov5640_set_fmt, + .get_selection = ov5640_get_selection, + .enum_frame_size = ov5640_enum_frame_size, + .enum_frame_interval = ov5640_enum_frame_interval, +}; + +static const struct v4l2_subdev_ops ov5640_subdev_ops = { + .core = &ov5640_core_ops, + .video = &ov5640_video_ops, + .pad = &ov5640_pad_ops, +}; + +static int ov5640_get_regulators(struct ov5640_dev *sensor) +{ + int i; + + for (i = 0; i < OV5640_NUM_SUPPLIES; i++) + sensor->supplies[i].supply = ov5640_supply_name[i]; + + return devm_regulator_bulk_get(&sensor->i2c_client->dev, + OV5640_NUM_SUPPLIES, + sensor->supplies); +} + +static int ov5640_check_chip_id(struct ov5640_dev *sensor) +{ + struct i2c_client *client = sensor->i2c_client; + int ret = 0; + u16 chip_id; + + ret = ov5640_read_reg16(sensor, OV5640_REG_CHIP_ID, &chip_id); + if (ret) { + dev_err(&client->dev, "%s: failed to read chip identifier\n", + __func__); + return ret; + } + + if (chip_id != 0x5640) { + dev_err(&client->dev, "%s: wrong chip identifier, expected 0x5640, got 0x%x\n", + __func__, chip_id); + return -ENXIO; + } + + return 0; +} + +static int ov5640_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct fwnode_handle *endpoint; + struct ov5640_dev *sensor; + int ret; + + sensor = devm_kzalloc(dev, sizeof(*sensor), GFP_KERNEL); + if (!sensor) + return -ENOMEM; + + sensor->i2c_client = client; + + /* + * default init sequence initialize sensor to + * YUV422 UYVY VGA@30fps + */ + sensor->fmt = ov5640_default_fmt; + sensor->frame_interval.numerator = 1; + sensor->frame_interval.denominator = ov5640_framerates[OV5640_30_FPS]; + sensor->current_fr = OV5640_30_FPS; + sensor->current_mode = + &ov5640_mode_data[OV5640_MODE_VGA_640_480]; + sensor->last_mode = sensor->current_mode; + sensor->current_link_freq = + ov5640_csi2_link_freqs[OV5640_DEFAULT_LINK_FREQ]; + + sensor->ae_target = 52; + + endpoint = fwnode_graph_get_next_endpoint(dev_fwnode(&client->dev), + NULL); + if (!endpoint) { + dev_err(dev, "endpoint node not found\n"); + return -EINVAL; + } + + ret = v4l2_fwnode_endpoint_parse(endpoint, &sensor->ep); + fwnode_handle_put(endpoint); + if (ret) { + dev_err(dev, "Could not parse endpoint\n"); + return ret; + } + + if (sensor->ep.bus_type != V4L2_MBUS_PARALLEL && + sensor->ep.bus_type != V4L2_MBUS_CSI2_DPHY && + sensor->ep.bus_type != V4L2_MBUS_BT656) { + dev_err(dev, "Unsupported bus type %d\n", sensor->ep.bus_type); + return -EINVAL; + } + + /* get system clock (xclk) */ + sensor->xclk = devm_clk_get(dev, "xclk"); + if (IS_ERR(sensor->xclk)) { + dev_err(dev, "failed to get xclk\n"); + return PTR_ERR(sensor->xclk); + } + + sensor->xclk_freq = clk_get_rate(sensor->xclk); + if (sensor->xclk_freq < OV5640_XCLK_MIN || + sensor->xclk_freq > OV5640_XCLK_MAX) { + dev_err(dev, "xclk frequency out of range: %d Hz\n", + sensor->xclk_freq); + return -EINVAL; + } + + /* request optional power down pin */ + sensor->pwdn_gpio = devm_gpiod_get_optional(dev, "powerdown", + GPIOD_OUT_HIGH); + if (IS_ERR(sensor->pwdn_gpio)) + return PTR_ERR(sensor->pwdn_gpio); + + /* request optional reset pin */ + sensor->reset_gpio = devm_gpiod_get_optional(dev, "reset", + GPIOD_OUT_HIGH); + if (IS_ERR(sensor->reset_gpio)) + return PTR_ERR(sensor->reset_gpio); + + v4l2_i2c_subdev_init(&sensor->sd, client, &ov5640_subdev_ops); + + sensor->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | + V4L2_SUBDEV_FL_HAS_EVENTS; + sensor->pad.flags = MEDIA_PAD_FL_SOURCE; + sensor->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR; + ret = media_entity_pads_init(&sensor->sd.entity, 1, &sensor->pad); + if (ret) + return ret; + + ret = ov5640_get_regulators(sensor); + if (ret) + goto entity_cleanup; + + mutex_init(&sensor->lock); + + ret = ov5640_init_controls(sensor); + if (ret) + goto entity_cleanup; + + ret = ov5640_sensor_resume(dev); + if (ret) { + dev_err(dev, "failed to power on\n"); + goto free_ctrls; + } + + pm_runtime_set_active(dev); + pm_runtime_get_noresume(dev); + pm_runtime_enable(dev); + + ret = ov5640_check_chip_id(sensor); + if (ret) + goto err_pm_runtime; + + ret = v4l2_async_register_subdev_sensor(&sensor->sd); + if (ret) + goto err_pm_runtime; + + pm_runtime_set_autosuspend_delay(dev, 1000); + pm_runtime_use_autosuspend(dev); + pm_runtime_put_autosuspend(dev); + + return 0; + +err_pm_runtime: + pm_runtime_put_noidle(dev); + pm_runtime_disable(dev); + ov5640_sensor_suspend(dev); +free_ctrls: + v4l2_ctrl_handler_free(&sensor->ctrls.handler); +entity_cleanup: + media_entity_cleanup(&sensor->sd.entity); + mutex_destroy(&sensor->lock); + return ret; +} + +static void ov5640_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct ov5640_dev *sensor = to_ov5640_dev(sd); + struct device *dev = &client->dev; + + pm_runtime_disable(dev); + if (!pm_runtime_status_suspended(dev)) + ov5640_sensor_suspend(dev); + pm_runtime_set_suspended(dev); + + v4l2_async_unregister_subdev(&sensor->sd); + media_entity_cleanup(&sensor->sd.entity); + v4l2_ctrl_handler_free(&sensor->ctrls.handler); + mutex_destroy(&sensor->lock); +} + +static const struct dev_pm_ops ov5640_pm_ops = { + SET_RUNTIME_PM_OPS(ov5640_sensor_suspend, ov5640_sensor_resume, NULL) +}; + +static const struct i2c_device_id ov5640_id[] = { + {"ov5640", 0}, + {}, +}; +MODULE_DEVICE_TABLE(i2c, ov5640_id); + +static const struct of_device_id ov5640_dt_ids[] = { + { .compatible = "ovti,ov5640" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, ov5640_dt_ids); + +static struct i2c_driver ov5640_i2c_driver = { + .driver = { + .name = "ov5640", + .of_match_table = ov5640_dt_ids, + .pm = &ov5640_pm_ops, + }, + .id_table = ov5640_id, + .probe_new = ov5640_probe, + .remove = ov5640_remove, +}; + +module_i2c_driver(ov5640_i2c_driver); + +MODULE_DESCRIPTION("OV5640 MIPI Camera Subdev Driver"); +MODULE_LICENSE("GPL"); |