1 files changed, 108 insertions, 0 deletions
diff --git a/drivers/media/pci/mantis/mantis_vp1034.c b/drivers/media/pci/mantis/mantis_vp1034.c
new file mode 100644
index 000000000..29ae1a351
--- /dev/null
+++ b/drivers/media/pci/mantis/mantis_vp1034.c
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+	Mantis VP-1034 driver
+
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+*/
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <asm/io.h>
+
+#include <media/dmxdev.h>
+#include <media/dvbdev.h>
+#include <media/dvb_demux.h>
+#include <media/dvb_frontend.h>
+#include <media/dvb_net.h>
+
+#include "mb86a16.h"
+#include "mantis_common.h"
+#include "mantis_ioc.h"
+#include "mantis_dvb.h"
+#include "mantis_vp1034.h"
+#include "mantis_reg.h"
+
+static const struct mb86a16_config vp1034_mb86a16_config = {
+	.demod_address	= 0x08,
+	.set_voltage	= vp1034_set_voltage,
+};
+
+#define MANTIS_MODEL_NAME	"VP-1034"
+#define MANTIS_DEV_TYPE		"DVB-S/DSS"
+
+int vp1034_set_voltage(struct dvb_frontend *fe, enum fe_sec_voltage voltage)
+{
+	struct mantis_pci *mantis = fe->dvb->priv;
+
+	switch (voltage) {
+	case SEC_VOLTAGE_13:
+		dprintk(MANTIS_ERROR, 1, "Polarization=[13V]");
+		mantis_gpio_set_bits(mantis, 13, 1);
+		mantis_gpio_set_bits(mantis, 14, 0);
+		break;
+	case SEC_VOLTAGE_18:
+		dprintk(MANTIS_ERROR, 1, "Polarization=[18V]");
+		mantis_gpio_set_bits(mantis, 13, 1);
+		mantis_gpio_set_bits(mantis, 14, 1);
+		break;
+	case SEC_VOLTAGE_OFF:
+		dprintk(MANTIS_ERROR, 1, "Frontend (dummy) POWERDOWN");
+		break;
+	default:
+		dprintk(MANTIS_ERROR, 1, "Invalid = (%d)", (u32) voltage);
+		return -EINVAL;
+	}
+	mmwrite(0x00, MANTIS_GPIF_DOUT);
+
+	return 0;
+}
+
+static int vp1034_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
+{
+	struct i2c_adapter *adapter	= &mantis->adapter;
+
+	int err = 0;
+
+	err = mantis_frontend_power(mantis, POWER_ON);
+	if (err == 0) {
+		mantis_frontend_soft_reset(mantis);
+		msleep(250);
+
+		dprintk(MANTIS_ERROR, 1, "Probing for MB86A16 (DVB-S/DSS)");
+		fe = dvb_attach(mb86a16_attach, &vp1034_mb86a16_config, adapter);
+		if (fe) {
+			dprintk(MANTIS_ERROR, 1,
+			"found MB86A16 DVB-S/DSS frontend @0x%02x",
+			vp1034_mb86a16_config.demod_address);
+
+		} else {
+			return -1;
+		}
+	} else {
+		dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
+			adapter->name,
+			err);
+
+		return -EIO;
+	}
+	mantis->fe = fe;
+	dprintk(MANTIS_ERROR, 1, "Done!");
+
+	return 0;
+}
+
+struct mantis_hwconfig vp1034_config = {
+	.model_name	= MANTIS_MODEL_NAME,
+	.dev_type	= MANTIS_DEV_TYPE,
+	.ts_size	= MANTIS_TS_204,
+
+	.baud_rate	= MANTIS_BAUD_9600,
+	.parity		= MANTIS_PARITY_NONE,
+	.bytes		= 0,
+
+	.frontend_init	= vp1034_frontend_init,
+	.power		= GPIF_A12,
+	.reset		= GPIF_A13,
+};