diff options
Diffstat (limited to 'drivers/media/pci/pt3/pt3.c')
| -rw-r--r-- | drivers/media/pci/pt3/pt3.c | 810 |
1 files changed, 810 insertions, 0 deletions
diff --git a/drivers/media/pci/pt3/pt3.c b/drivers/media/pci/pt3/pt3.c new file mode 100644 index 000000000..f6deac859 --- /dev/null +++ b/drivers/media/pci/pt3/pt3.c @@ -0,0 +1,810 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Earthsoft PT3 driver + * + * Copyright (C) 2014 Akihiro Tsukada <tskd08@gmail.com> + */ + +#include <linux/freezer.h> +#include <linux/kernel.h> +#include <linux/kthread.h> +#include <linux/mutex.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/string.h> +#include <linux/sched/signal.h> + +#include <media/dmxdev.h> +#include <media/dvbdev.h> +#include <media/dvb_demux.h> +#include <media/dvb_frontend.h> + +#include "pt3.h" + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +static bool one_adapter; +module_param(one_adapter, bool, 0444); +MODULE_PARM_DESC(one_adapter, "Place FE's together under one adapter."); + +static int num_bufs = 4; +module_param(num_bufs, int, 0444); +MODULE_PARM_DESC(num_bufs, "Number of DMA buffer (188KiB) per FE."); + + +static const struct i2c_algorithm pt3_i2c_algo = { + .master_xfer = &pt3_i2c_master_xfer, + .functionality = &pt3_i2c_functionality, +}; + +static const struct pt3_adap_config adap_conf[PT3_NUM_FE] = { + { + .demod_info = { + I2C_BOARD_INFO(TC90522_I2C_DEV_SAT, 0x11), + }, + .tuner_info = { + I2C_BOARD_INFO("qm1d1c0042", 0x63), + }, + .tuner_cfg.qm1d1c0042 = { + .lpf = 1, + }, + .init_freq = 1049480 - 300, + }, + { + .demod_info = { + I2C_BOARD_INFO(TC90522_I2C_DEV_TER, 0x10), + }, + .tuner_info = { + I2C_BOARD_INFO("mxl301rf", 0x62), + }, + .init_freq = 515142857, + }, + { + .demod_info = { + I2C_BOARD_INFO(TC90522_I2C_DEV_SAT, 0x13), + }, + .tuner_info = { + I2C_BOARD_INFO("qm1d1c0042", 0x60), + }, + .tuner_cfg.qm1d1c0042 = { + .lpf = 1, + }, + .init_freq = 1049480 + 300, + }, + { + .demod_info = { + I2C_BOARD_INFO(TC90522_I2C_DEV_TER, 0x12), + }, + .tuner_info = { + I2C_BOARD_INFO("mxl301rf", 0x61), + }, + .init_freq = 521142857, + }, +}; + + +struct reg_val { + u8 reg; + u8 val; +}; + +static int +pt3_demod_write(struct pt3_adapter *adap, const struct reg_val *data, int num) +{ + struct i2c_msg msg; + int i, ret; + + ret = 0; + msg.addr = adap->i2c_demod->addr; + msg.flags = 0; + msg.len = 2; + for (i = 0; i < num; i++) { + msg.buf = (u8 *)&data[i]; + ret = i2c_transfer(adap->i2c_demod->adapter, &msg, 1); + if (ret == 0) + ret = -EREMOTE; + if (ret < 0) + return ret; + } + return 0; +} + +static inline void pt3_lnb_ctrl(struct pt3_board *pt3, bool on) +{ + iowrite32((on ? 0x0f : 0x0c), pt3->regs[0] + REG_SYSTEM_W); +} + +static inline struct pt3_adapter *pt3_find_adapter(struct dvb_frontend *fe) +{ + struct pt3_board *pt3; + int i; + + if (one_adapter) { + pt3 = fe->dvb->priv; + for (i = 0; i < PT3_NUM_FE; i++) + if (pt3->adaps[i]->fe == fe) + return pt3->adaps[i]; + } + return container_of(fe->dvb, struct pt3_adapter, dvb_adap); +} + +/* + * all 4 tuners in PT3 are packaged in a can module (Sharp VA4M6JC2103). + * it seems that they share the power lines and Amp power line and + * adaps[3] controls those powers. + */ +static int +pt3_set_tuner_power(struct pt3_board *pt3, bool tuner_on, bool amp_on) +{ + struct reg_val rv = { 0x1e, 0x99 }; + + if (tuner_on) + rv.val |= 0x40; + if (amp_on) + rv.val |= 0x04; + return pt3_demod_write(pt3->adaps[PT3_NUM_FE - 1], &rv, 1); +} + +static int pt3_set_lna(struct dvb_frontend *fe) +{ + struct pt3_adapter *adap; + struct pt3_board *pt3; + u32 val; + int ret; + + /* LNA is shared btw. 2 TERR-tuners */ + + adap = pt3_find_adapter(fe); + val = fe->dtv_property_cache.lna; + if (val == LNA_AUTO || val == adap->cur_lna) + return 0; + + pt3 = adap->dvb_adap.priv; + if (mutex_lock_interruptible(&pt3->lock)) + return -ERESTARTSYS; + if (val) + pt3->lna_on_cnt++; + else + pt3->lna_on_cnt--; + + if (val && pt3->lna_on_cnt <= 1) { + pt3->lna_on_cnt = 1; + ret = pt3_set_tuner_power(pt3, true, true); + } else if (!val && pt3->lna_on_cnt <= 0) { + pt3->lna_on_cnt = 0; + ret = pt3_set_tuner_power(pt3, true, false); + } else + ret = 0; + mutex_unlock(&pt3->lock); + adap->cur_lna = (val != 0); + return ret; +} + +static int pt3_set_voltage(struct dvb_frontend *fe, enum fe_sec_voltage volt) +{ + struct pt3_adapter *adap; + struct pt3_board *pt3; + bool on; + + /* LNB power is shared btw. 2 SAT-tuners */ + + adap = pt3_find_adapter(fe); + on = (volt != SEC_VOLTAGE_OFF); + if (on == adap->cur_lnb) + return 0; + adap->cur_lnb = on; + pt3 = adap->dvb_adap.priv; + if (mutex_lock_interruptible(&pt3->lock)) + return -ERESTARTSYS; + if (on) + pt3->lnb_on_cnt++; + else + pt3->lnb_on_cnt--; + + if (on && pt3->lnb_on_cnt <= 1) { + pt3->lnb_on_cnt = 1; + pt3_lnb_ctrl(pt3, true); + } else if (!on && pt3->lnb_on_cnt <= 0) { + pt3->lnb_on_cnt = 0; + pt3_lnb_ctrl(pt3, false); + } + mutex_unlock(&pt3->lock); + return 0; +} + +/* register values used in pt3_fe_init() */ + +static const struct reg_val init0_sat[] = { + { 0x03, 0x01 }, + { 0x1e, 0x10 }, +}; +static const struct reg_val init0_ter[] = { + { 0x01, 0x40 }, + { 0x1c, 0x10 }, +}; +static const struct reg_val cfg_sat[] = { + { 0x1c, 0x15 }, + { 0x1f, 0x04 }, +}; +static const struct reg_val cfg_ter[] = { + { 0x1d, 0x01 }, +}; + +/* + * pt3_fe_init: initialize demod sub modules and ISDB-T tuners all at once. + * + * As for demod IC (TC90522) and ISDB-T tuners (MxL301RF), + * the i2c sequences for init'ing them are not public and hidden in a ROM, + * and include the board specific configurations as well. + * They are stored in a lump and cannot be taken out / accessed separately, + * thus cannot be moved to the FE/tuner driver. + */ +static int pt3_fe_init(struct pt3_board *pt3) +{ + int i, ret; + struct dvb_frontend *fe; + + pt3_i2c_reset(pt3); + ret = pt3_init_all_demods(pt3); + if (ret < 0) { + dev_warn(&pt3->pdev->dev, "Failed to init demod chips\n"); + return ret; + } + + /* additional config? */ + for (i = 0; i < PT3_NUM_FE; i++) { + fe = pt3->adaps[i]->fe; + + if (fe->ops.delsys[0] == SYS_ISDBS) + ret = pt3_demod_write(pt3->adaps[i], + init0_sat, ARRAY_SIZE(init0_sat)); + else + ret = pt3_demod_write(pt3->adaps[i], + init0_ter, ARRAY_SIZE(init0_ter)); + if (ret < 0) { + dev_warn(&pt3->pdev->dev, + "demod[%d] failed in init sequence0\n", i); + return ret; + } + ret = fe->ops.init(fe); + if (ret < 0) + return ret; + } + + usleep_range(2000, 4000); + ret = pt3_set_tuner_power(pt3, true, false); + if (ret < 0) { + dev_warn(&pt3->pdev->dev, "Failed to control tuner module\n"); + return ret; + } + + /* output pin configuration */ + for (i = 0; i < PT3_NUM_FE; i++) { + fe = pt3->adaps[i]->fe; + if (fe->ops.delsys[0] == SYS_ISDBS) + ret = pt3_demod_write(pt3->adaps[i], + cfg_sat, ARRAY_SIZE(cfg_sat)); + else + ret = pt3_demod_write(pt3->adaps[i], + cfg_ter, ARRAY_SIZE(cfg_ter)); + if (ret < 0) { + dev_warn(&pt3->pdev->dev, + "demod[%d] failed in init sequence1\n", i); + return ret; + } + } + usleep_range(4000, 6000); + + for (i = 0; i < PT3_NUM_FE; i++) { + fe = pt3->adaps[i]->fe; + if (fe->ops.delsys[0] != SYS_ISDBS) + continue; + /* init and wake-up ISDB-S tuners */ + ret = fe->ops.tuner_ops.init(fe); + if (ret < 0) { + dev_warn(&pt3->pdev->dev, + "Failed to init SAT-tuner[%d]\n", i); + return ret; + } + } + ret = pt3_init_all_mxl301rf(pt3); + if (ret < 0) { + dev_warn(&pt3->pdev->dev, "Failed to init TERR-tuners\n"); + return ret; + } + + ret = pt3_set_tuner_power(pt3, true, true); + if (ret < 0) { + dev_warn(&pt3->pdev->dev, "Failed to control tuner module\n"); + return ret; + } + + /* Wake up all tuners and make an initial tuning, + * in order to avoid interference among the tuners in the module, + * according to the doc from the manufacturer. + */ + for (i = 0; i < PT3_NUM_FE; i++) { + fe = pt3->adaps[i]->fe; + ret = 0; + if (fe->ops.delsys[0] == SYS_ISDBT) + ret = fe->ops.tuner_ops.init(fe); + /* set only when called from pt3_probe(), not resume() */ + if (ret == 0 && fe->dtv_property_cache.frequency == 0) { + fe->dtv_property_cache.frequency = + adap_conf[i].init_freq; + ret = fe->ops.tuner_ops.set_params(fe); + } + if (ret < 0) { + dev_warn(&pt3->pdev->dev, + "Failed in initial tuning of tuner[%d]\n", i); + return ret; + } + } + + /* and sleep again, waiting to be opened by users. */ + for (i = 0; i < PT3_NUM_FE; i++) { + fe = pt3->adaps[i]->fe; + if (fe->ops.tuner_ops.sleep) + ret = fe->ops.tuner_ops.sleep(fe); + if (ret < 0) + break; + if (fe->ops.sleep) + ret = fe->ops.sleep(fe); + if (ret < 0) + break; + if (fe->ops.delsys[0] == SYS_ISDBS) + fe->ops.set_voltage = &pt3_set_voltage; + else + fe->ops.set_lna = &pt3_set_lna; + } + if (i < PT3_NUM_FE) { + dev_warn(&pt3->pdev->dev, "FE[%d] failed to standby\n", i); + return ret; + } + return 0; +} + + +static int pt3_attach_fe(struct pt3_board *pt3, int i) +{ + const struct i2c_board_info *info; + struct tc90522_config cfg; + struct i2c_client *cl; + struct dvb_adapter *dvb_adap; + int ret; + + info = &adap_conf[i].demod_info; + cfg = adap_conf[i].demod_cfg; + cfg.tuner_i2c = NULL; + + ret = -ENODEV; + cl = dvb_module_probe("tc90522", info->type, &pt3->i2c_adap, + info->addr, &cfg); + if (!cl) + return -ENODEV; + pt3->adaps[i]->i2c_demod = cl; + + if (!strncmp(cl->name, TC90522_I2C_DEV_SAT, + strlen(TC90522_I2C_DEV_SAT))) { + struct qm1d1c0042_config tcfg; + + tcfg = adap_conf[i].tuner_cfg.qm1d1c0042; + tcfg.fe = cfg.fe; + info = &adap_conf[i].tuner_info; + cl = dvb_module_probe("qm1d1c0042", info->type, cfg.tuner_i2c, + info->addr, &tcfg); + } else { + struct mxl301rf_config tcfg; + + tcfg = adap_conf[i].tuner_cfg.mxl301rf; + tcfg.fe = cfg.fe; + info = &adap_conf[i].tuner_info; + cl = dvb_module_probe("mxl301rf", info->type, cfg.tuner_i2c, + info->addr, &tcfg); + } + if (!cl) + goto err_demod_module_release; + pt3->adaps[i]->i2c_tuner = cl; + + dvb_adap = &pt3->adaps[one_adapter ? 0 : i]->dvb_adap; + ret = dvb_register_frontend(dvb_adap, cfg.fe); + if (ret < 0) + goto err_tuner_module_release; + pt3->adaps[i]->fe = cfg.fe; + return 0; + +err_tuner_module_release: + dvb_module_release(pt3->adaps[i]->i2c_tuner); +err_demod_module_release: + dvb_module_release(pt3->adaps[i]->i2c_demod); + + return ret; +} + + +static int pt3_fetch_thread(void *data) +{ + struct pt3_adapter *adap = data; + ktime_t delay; + bool was_frozen; + +#define PT3_INITIAL_BUF_DROPS 4 +#define PT3_FETCH_DELAY 10 +#define PT3_FETCH_DELAY_DELTA 2 + + pt3_init_dmabuf(adap); + adap->num_discard = PT3_INITIAL_BUF_DROPS; + + dev_dbg(adap->dvb_adap.device, "PT3: [%s] started\n", + adap->thread->comm); + set_freezable(); + while (!kthread_freezable_should_stop(&was_frozen)) { + if (was_frozen) + adap->num_discard = PT3_INITIAL_BUF_DROPS; + + pt3_proc_dma(adap); + + delay = ktime_set(0, PT3_FETCH_DELAY * NSEC_PER_MSEC); + set_current_state(TASK_UNINTERRUPTIBLE|TASK_FREEZABLE); + schedule_hrtimeout_range(&delay, + PT3_FETCH_DELAY_DELTA * NSEC_PER_MSEC, + HRTIMER_MODE_REL); + } + dev_dbg(adap->dvb_adap.device, "PT3: [%s] exited\n", + adap->thread->comm); + return 0; +} + +static int pt3_start_streaming(struct pt3_adapter *adap) +{ + struct task_struct *thread; + + /* start fetching thread */ + thread = kthread_run(pt3_fetch_thread, adap, "pt3-ad%i-dmx%i", + adap->dvb_adap.num, adap->dmxdev.dvbdev->id); + if (IS_ERR(thread)) { + int ret = PTR_ERR(thread); + + adap->thread = NULL; + dev_warn(adap->dvb_adap.device, + "PT3 (adap:%d, dmx:%d): failed to start kthread\n", + adap->dvb_adap.num, adap->dmxdev.dvbdev->id); + return ret; + } + adap->thread = thread; + + return pt3_start_dma(adap); +} + +static int pt3_stop_streaming(struct pt3_adapter *adap) +{ + int ret; + + ret = pt3_stop_dma(adap); + if (ret) + dev_warn(adap->dvb_adap.device, + "PT3: failed to stop streaming of adap:%d/FE:%d\n", + adap->dvb_adap.num, adap->fe->id); + + /* kill the fetching thread */ + ret = kthread_stop(adap->thread); + adap->thread = NULL; + return ret; +} + +static int pt3_start_feed(struct dvb_demux_feed *feed) +{ + struct pt3_adapter *adap; + + if (signal_pending(current)) + return -EINTR; + + adap = container_of(feed->demux, struct pt3_adapter, demux); + adap->num_feeds++; + if (adap->num_feeds > 1) + return 0; + + return pt3_start_streaming(adap); + +} + +static int pt3_stop_feed(struct dvb_demux_feed *feed) +{ + struct pt3_adapter *adap; + + adap = container_of(feed->demux, struct pt3_adapter, demux); + + adap->num_feeds--; + if (adap->num_feeds > 0 || !adap->thread) + return 0; + adap->num_feeds = 0; + + return pt3_stop_streaming(adap); +} + + +static int pt3_alloc_adapter(struct pt3_board *pt3, int index) +{ + int ret; + struct pt3_adapter *adap; + struct dvb_adapter *da; + + adap = kzalloc(sizeof(*adap), GFP_KERNEL); + if (!adap) + return -ENOMEM; + + pt3->adaps[index] = adap; + adap->adap_idx = index; + + if (index == 0 || !one_adapter) { + ret = dvb_register_adapter(&adap->dvb_adap, "PT3 DVB", + THIS_MODULE, &pt3->pdev->dev, adapter_nr); + if (ret < 0) { + dev_err(&pt3->pdev->dev, + "failed to register adapter dev\n"); + goto err_mem; + } + da = &adap->dvb_adap; + } else + da = &pt3->adaps[0]->dvb_adap; + + adap->dvb_adap.priv = pt3; + adap->demux.dmx.capabilities = DMX_TS_FILTERING | DMX_SECTION_FILTERING; + adap->demux.priv = adap; + adap->demux.feednum = 256; + adap->demux.filternum = 256; + adap->demux.start_feed = pt3_start_feed; + adap->demux.stop_feed = pt3_stop_feed; + ret = dvb_dmx_init(&adap->demux); + if (ret < 0) { + dev_err(&pt3->pdev->dev, "failed to init dmx dev\n"); + goto err_adap; + } + + adap->dmxdev.filternum = 256; + adap->dmxdev.demux = &adap->demux.dmx; + ret = dvb_dmxdev_init(&adap->dmxdev, da); + if (ret < 0) { + dev_err(&pt3->pdev->dev, "failed to init dmxdev\n"); + goto err_demux; + } + + ret = pt3_alloc_dmabuf(adap); + if (ret) { + dev_err(&pt3->pdev->dev, "failed to alloc DMA buffers\n"); + goto err_dmabuf; + } + + return 0; + +err_dmabuf: + pt3_free_dmabuf(adap); + dvb_dmxdev_release(&adap->dmxdev); +err_demux: + dvb_dmx_release(&adap->demux); +err_adap: + if (index == 0 || !one_adapter) + dvb_unregister_adapter(da); +err_mem: + kfree(adap); + pt3->adaps[index] = NULL; + return ret; +} + +static void pt3_cleanup_adapter(struct pt3_board *pt3, int index) +{ + struct pt3_adapter *adap; + struct dmx_demux *dmx; + + adap = pt3->adaps[index]; + if (adap == NULL) + return; + + /* stop demux kthread */ + if (adap->thread) + pt3_stop_streaming(adap); + + dmx = &adap->demux.dmx; + dmx->close(dmx); + if (adap->fe) { + adap->fe->callback = NULL; + if (adap->fe->frontend_priv) + dvb_unregister_frontend(adap->fe); + dvb_module_release(adap->i2c_tuner); + dvb_module_release(adap->i2c_demod); + } + pt3_free_dmabuf(adap); + dvb_dmxdev_release(&adap->dmxdev); + dvb_dmx_release(&adap->demux); + if (index == 0 || !one_adapter) + dvb_unregister_adapter(&adap->dvb_adap); + kfree(adap); + pt3->adaps[index] = NULL; +} + +#ifdef CONFIG_PM_SLEEP + +static int pt3_suspend(struct device *dev) +{ + struct pt3_board *pt3 = dev_get_drvdata(dev); + int i; + struct pt3_adapter *adap; + + for (i = 0; i < PT3_NUM_FE; i++) { + adap = pt3->adaps[i]; + if (adap->num_feeds > 0) + pt3_stop_dma(adap); + dvb_frontend_suspend(adap->fe); + pt3_free_dmabuf(adap); + } + + pt3_lnb_ctrl(pt3, false); + pt3_set_tuner_power(pt3, false, false); + return 0; +} + +static int pt3_resume(struct device *dev) +{ + struct pt3_board *pt3 = dev_get_drvdata(dev); + int i, ret; + struct pt3_adapter *adap; + + ret = pt3_fe_init(pt3); + if (ret) + return ret; + + if (pt3->lna_on_cnt > 0) + pt3_set_tuner_power(pt3, true, true); + if (pt3->lnb_on_cnt > 0) + pt3_lnb_ctrl(pt3, true); + + for (i = 0; i < PT3_NUM_FE; i++) { + adap = pt3->adaps[i]; + dvb_frontend_resume(adap->fe); + ret = pt3_alloc_dmabuf(adap); + if (ret) { + dev_err(&pt3->pdev->dev, "failed to alloc DMA bufs\n"); + continue; + } + if (adap->num_feeds > 0) + pt3_start_dma(adap); + } + + return 0; +} + +#endif /* CONFIG_PM_SLEEP */ + + +static void pt3_remove(struct pci_dev *pdev) +{ + struct pt3_board *pt3; + int i; + + pt3 = pci_get_drvdata(pdev); + for (i = PT3_NUM_FE - 1; i >= 0; i--) + pt3_cleanup_adapter(pt3, i); + i2c_del_adapter(&pt3->i2c_adap); +} + +static int pt3_probe(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + u8 rev; + u32 ver; + int i, ret; + struct pt3_board *pt3; + struct i2c_adapter *i2c; + + if (pci_read_config_byte(pdev, PCI_REVISION_ID, &rev) || rev != 1) + return -ENODEV; + + ret = pcim_enable_device(pdev); + if (ret < 0) + return -ENODEV; + pci_set_master(pdev); + + ret = pcim_iomap_regions(pdev, BIT(0) | BIT(2), DRV_NAME); + if (ret < 0) + return ret; + + ret = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)); + if (ret == 0) + dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64)); + else { + ret = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (ret == 0) + dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + else { + dev_err(&pdev->dev, "Failed to set DMA mask\n"); + return ret; + } + dev_info(&pdev->dev, "Use 32bit DMA\n"); + } + + pt3 = devm_kzalloc(&pdev->dev, sizeof(*pt3), GFP_KERNEL); + if (!pt3) + return -ENOMEM; + pci_set_drvdata(pdev, pt3); + pt3->pdev = pdev; + mutex_init(&pt3->lock); + pt3->regs[0] = pcim_iomap_table(pdev)[0]; + pt3->regs[1] = pcim_iomap_table(pdev)[2]; + + ver = ioread32(pt3->regs[0] + REG_VERSION); + if ((ver >> 16) != 0x0301) { + dev_warn(&pdev->dev, "PT%d, I/F-ver.:%d not supported\n", + ver >> 24, (ver & 0x00ff0000) >> 16); + return -ENODEV; + } + + pt3->num_bufs = clamp_val(num_bufs, MIN_DATA_BUFS, MAX_DATA_BUFS); + + pt3->i2c_buf = devm_kmalloc(&pdev->dev, sizeof(*pt3->i2c_buf), GFP_KERNEL); + if (!pt3->i2c_buf) + return -ENOMEM; + i2c = &pt3->i2c_adap; + i2c->owner = THIS_MODULE; + i2c->algo = &pt3_i2c_algo; + i2c->algo_data = NULL; + i2c->dev.parent = &pdev->dev; + strscpy(i2c->name, DRV_NAME, sizeof(i2c->name)); + i2c_set_adapdata(i2c, pt3); + ret = i2c_add_adapter(i2c); + if (ret < 0) + return ret; + + for (i = 0; i < PT3_NUM_FE; i++) { + ret = pt3_alloc_adapter(pt3, i); + if (ret < 0) + break; + + ret = pt3_attach_fe(pt3, i); + if (ret < 0) + break; + } + if (i < PT3_NUM_FE) { + dev_err(&pdev->dev, "Failed to create FE%d\n", i); + goto err_cleanup_adapters; + } + + ret = pt3_fe_init(pt3); + if (ret < 0) { + dev_err(&pdev->dev, "Failed to init frontends\n"); + i = PT3_NUM_FE - 1; + goto err_cleanup_adapters; + } + + dev_info(&pdev->dev, + "successfully init'ed PT%d (fw:0x%02x, I/F:0x%02x)\n", + ver >> 24, (ver >> 8) & 0xff, (ver >> 16) & 0xff); + return 0; + +err_cleanup_adapters: + while (i >= 0) + pt3_cleanup_adapter(pt3, i--); + i2c_del_adapter(i2c); + return ret; +} + +static const struct pci_device_id pt3_id_table[] = { + { PCI_DEVICE_SUB(0x1172, 0x4c15, 0xee8d, 0x0368) }, + { }, +}; +MODULE_DEVICE_TABLE(pci, pt3_id_table); + +static SIMPLE_DEV_PM_OPS(pt3_pm_ops, pt3_suspend, pt3_resume); + +static struct pci_driver pt3_driver = { + .name = DRV_NAME, + .probe = pt3_probe, + .remove = pt3_remove, + .id_table = pt3_id_table, + + .driver.pm = &pt3_pm_ops, +}; + +module_pci_driver(pt3_driver); + +MODULE_DESCRIPTION("Earthsoft PT3 Driver"); +MODULE_AUTHOR("Akihiro TSUKADA"); +MODULE_LICENSE("GPL"); |