summaryrefslogtreecommitdiffstats
path: root/drivers/media/platform/marvell/cafe-driver.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/platform/marvell/cafe-driver.c')
-rw-r--r--drivers/media/platform/marvell/cafe-driver.c673
1 files changed, 673 insertions, 0 deletions
diff --git a/drivers/media/platform/marvell/cafe-driver.c b/drivers/media/platform/marvell/cafe-driver.c
new file mode 100644
index 000000000..ae97ce4ea
--- /dev/null
+++ b/drivers/media/platform/marvell/cafe-driver.c
@@ -0,0 +1,673 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * A driver for the CMOS camera controller in the Marvell 88ALP01 "cafe"
+ * multifunction chip. Currently works with the Omnivision OV7670
+ * sensor.
+ *
+ * The data sheet for this device can be found at:
+ * http://wiki.laptop.org/images/5/5c/88ALP01_Datasheet_July_2007.pdf
+ *
+ * Copyright 2006-11 One Laptop Per Child Association, Inc.
+ * Copyright 2006-11 Jonathan Corbet <corbet@lwn.net>
+ * Copyright 2018 Lubomir Rintel <lkundrak@v3.sk>
+ *
+ * Written by Jonathan Corbet, corbet@lwn.net.
+ *
+ * v4l2_device/v4l2_subdev conversion by:
+ * Copyright (C) 2009 Hans Verkuil <hverkuil@xs4all.nl>
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-device.h>
+#include <media/i2c/ov7670.h>
+#include <linux/device.h>
+#include <linux/wait.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/clkdev.h>
+
+#include "mcam-core.h"
+
+#define CAFE_VERSION 0x000002
+
+
+/*
+ * Parameters.
+ */
+MODULE_AUTHOR("Jonathan Corbet <corbet@lwn.net>");
+MODULE_DESCRIPTION("Marvell 88ALP01 CMOS Camera Controller driver");
+MODULE_LICENSE("GPL");
+
+struct cafe_camera {
+ int registered; /* Fully initialized? */
+ struct mcam_camera mcam;
+ struct pci_dev *pdev;
+ struct i2c_adapter *i2c_adapter;
+ wait_queue_head_t smbus_wait; /* Waiting on i2c events */
+};
+
+/*
+ * Most of the camera controller registers are defined in mcam-core.h,
+ * but the Cafe platform has some additional registers of its own;
+ * they are described here.
+ */
+
+/*
+ * "General purpose register" has a couple of GPIOs used for sensor
+ * power and reset on OLPC XO 1.0 systems.
+ */
+#define REG_GPR 0xb4
+#define GPR_C1EN 0x00000020 /* Pad 1 (power down) enable */
+#define GPR_C0EN 0x00000010 /* Pad 0 (reset) enable */
+#define GPR_C1 0x00000002 /* Control 1 value */
+/*
+ * Control 0 is wired to reset on OLPC machines. For ov7x sensors,
+ * it is active low.
+ */
+#define GPR_C0 0x00000001 /* Control 0 value */
+
+/*
+ * These registers control the SMBUS module for communicating
+ * with the sensor.
+ */
+#define REG_TWSIC0 0xb8 /* TWSI (smbus) control 0 */
+#define TWSIC0_EN 0x00000001 /* TWSI enable */
+#define TWSIC0_MODE 0x00000002 /* 1 = 16-bit, 0 = 8-bit */
+#define TWSIC0_SID 0x000003fc /* Slave ID */
+/*
+ * Subtle trickery: the slave ID field starts with bit 2. But the
+ * Linux i2c stack wants to treat the bottommost bit as a separate
+ * read/write bit, which is why slave ID's are usually presented
+ * >>1. For consistency with that behavior, we shift over three
+ * bits instead of two.
+ */
+#define TWSIC0_SID_SHIFT 3
+#define TWSIC0_CLKDIV 0x0007fc00 /* Clock divider */
+#define TWSIC0_MASKACK 0x00400000 /* Mask ack from sensor */
+#define TWSIC0_OVMAGIC 0x00800000 /* Make it work on OV sensors */
+
+#define REG_TWSIC1 0xbc /* TWSI control 1 */
+#define TWSIC1_DATA 0x0000ffff /* Data to/from camchip */
+#define TWSIC1_ADDR 0x00ff0000 /* Address (register) */
+#define TWSIC1_ADDR_SHIFT 16
+#define TWSIC1_READ 0x01000000 /* Set for read op */
+#define TWSIC1_WSTAT 0x02000000 /* Write status */
+#define TWSIC1_RVALID 0x04000000 /* Read data valid */
+#define TWSIC1_ERROR 0x08000000 /* Something screwed up */
+
+/*
+ * Here's the weird global control registers
+ */
+#define REG_GL_CSR 0x3004 /* Control/status register */
+#define GCSR_SRS 0x00000001 /* SW Reset set */
+#define GCSR_SRC 0x00000002 /* SW Reset clear */
+#define GCSR_MRS 0x00000004 /* Master reset set */
+#define GCSR_MRC 0x00000008 /* HW Reset clear */
+#define GCSR_CCIC_EN 0x00004000 /* CCIC Clock enable */
+#define REG_GL_IMASK 0x300c /* Interrupt mask register */
+#define GIMSK_CCIC_EN 0x00000004 /* CCIC Interrupt enable */
+
+#define REG_GL_FCR 0x3038 /* GPIO functional control register */
+#define GFCR_GPIO_ON 0x08 /* Camera GPIO enabled */
+#define REG_GL_GPIOR 0x315c /* GPIO register */
+#define GGPIO_OUT 0x80000 /* GPIO output */
+#define GGPIO_VAL 0x00008 /* Output pin value */
+
+#define REG_LEN (REG_GL_IMASK + 4)
+
+
+/*
+ * Debugging and related.
+ */
+#define cam_err(cam, fmt, arg...) \
+ dev_err(&(cam)->pdev->dev, fmt, ##arg);
+#define cam_warn(cam, fmt, arg...) \
+ dev_warn(&(cam)->pdev->dev, fmt, ##arg);
+
+/* -------------------------------------------------------------------- */
+/*
+ * The I2C/SMBUS interface to the camera itself starts here. The
+ * controller handles SMBUS itself, presenting a relatively simple register
+ * interface; all we have to do is to tell it where to route the data.
+ */
+#define CAFE_SMBUS_TIMEOUT (HZ) /* generous */
+
+static int cafe_smbus_write_done(struct mcam_camera *mcam)
+{
+ unsigned long flags;
+ int c1;
+
+ /*
+ * We must delay after the interrupt, or the controller gets confused
+ * and never does give us good status. Fortunately, we don't do this
+ * often.
+ */
+ udelay(20);
+ spin_lock_irqsave(&mcam->dev_lock, flags);
+ c1 = mcam_reg_read(mcam, REG_TWSIC1);
+ spin_unlock_irqrestore(&mcam->dev_lock, flags);
+ return (c1 & (TWSIC1_WSTAT|TWSIC1_ERROR)) != TWSIC1_WSTAT;
+}
+
+static int cafe_smbus_write_data(struct cafe_camera *cam,
+ u16 addr, u8 command, u8 value)
+{
+ unsigned int rval;
+ unsigned long flags;
+ struct mcam_camera *mcam = &cam->mcam;
+
+ spin_lock_irqsave(&mcam->dev_lock, flags);
+ rval = TWSIC0_EN | ((addr << TWSIC0_SID_SHIFT) & TWSIC0_SID);
+ rval |= TWSIC0_OVMAGIC; /* Make OV sensors work */
+ /*
+ * Marvell sez set clkdiv to all 1's for now.
+ */
+ rval |= TWSIC0_CLKDIV;
+ mcam_reg_write(mcam, REG_TWSIC0, rval);
+ (void) mcam_reg_read(mcam, REG_TWSIC1); /* force write */
+ rval = value | ((command << TWSIC1_ADDR_SHIFT) & TWSIC1_ADDR);
+ mcam_reg_write(mcam, REG_TWSIC1, rval);
+ spin_unlock_irqrestore(&mcam->dev_lock, flags);
+
+ /* Unfortunately, reading TWSIC1 too soon after sending a command
+ * causes the device to die.
+ * Use a busy-wait because we often send a large quantity of small
+ * commands at-once; using msleep() would cause a lot of context
+ * switches which take longer than 2ms, resulting in a noticeable
+ * boot-time and capture-start delays.
+ */
+ mdelay(2);
+
+ /*
+ * Another sad fact is that sometimes, commands silently complete but
+ * cafe_smbus_write_done() never becomes aware of this.
+ * This happens at random and appears to possible occur with any
+ * command.
+ * We don't understand why this is. We work around this issue
+ * with the timeout in the wait below, assuming that all commands
+ * complete within the timeout.
+ */
+ wait_event_timeout(cam->smbus_wait, cafe_smbus_write_done(mcam),
+ CAFE_SMBUS_TIMEOUT);
+
+ spin_lock_irqsave(&mcam->dev_lock, flags);
+ rval = mcam_reg_read(mcam, REG_TWSIC1);
+ spin_unlock_irqrestore(&mcam->dev_lock, flags);
+
+ if (rval & TWSIC1_WSTAT) {
+ cam_err(cam, "SMBUS write (%02x/%02x/%02x) timed out\n", addr,
+ command, value);
+ return -EIO;
+ }
+ if (rval & TWSIC1_ERROR) {
+ cam_err(cam, "SMBUS write (%02x/%02x/%02x) error\n", addr,
+ command, value);
+ return -EIO;
+ }
+ return 0;
+}
+
+
+
+static int cafe_smbus_read_done(struct mcam_camera *mcam)
+{
+ unsigned long flags;
+ int c1;
+
+ /*
+ * We must delay after the interrupt, or the controller gets confused
+ * and never does give us good status. Fortunately, we don't do this
+ * often.
+ */
+ udelay(20);
+ spin_lock_irqsave(&mcam->dev_lock, flags);
+ c1 = mcam_reg_read(mcam, REG_TWSIC1);
+ spin_unlock_irqrestore(&mcam->dev_lock, flags);
+ return c1 & (TWSIC1_RVALID|TWSIC1_ERROR);
+}
+
+
+
+static int cafe_smbus_read_data(struct cafe_camera *cam,
+ u16 addr, u8 command, u8 *value)
+{
+ unsigned int rval;
+ unsigned long flags;
+ struct mcam_camera *mcam = &cam->mcam;
+
+ spin_lock_irqsave(&mcam->dev_lock, flags);
+ rval = TWSIC0_EN | ((addr << TWSIC0_SID_SHIFT) & TWSIC0_SID);
+ rval |= TWSIC0_OVMAGIC; /* Make OV sensors work */
+ /*
+ * Marvel sez set clkdiv to all 1's for now.
+ */
+ rval |= TWSIC0_CLKDIV;
+ mcam_reg_write(mcam, REG_TWSIC0, rval);
+ (void) mcam_reg_read(mcam, REG_TWSIC1); /* force write */
+ rval = TWSIC1_READ | ((command << TWSIC1_ADDR_SHIFT) & TWSIC1_ADDR);
+ mcam_reg_write(mcam, REG_TWSIC1, rval);
+ spin_unlock_irqrestore(&mcam->dev_lock, flags);
+
+ wait_event_timeout(cam->smbus_wait,
+ cafe_smbus_read_done(mcam), CAFE_SMBUS_TIMEOUT);
+ spin_lock_irqsave(&mcam->dev_lock, flags);
+ rval = mcam_reg_read(mcam, REG_TWSIC1);
+ spin_unlock_irqrestore(&mcam->dev_lock, flags);
+
+ if (rval & TWSIC1_ERROR) {
+ cam_err(cam, "SMBUS read (%02x/%02x) error\n", addr, command);
+ return -EIO;
+ }
+ if (!(rval & TWSIC1_RVALID)) {
+ cam_err(cam, "SMBUS read (%02x/%02x) timed out\n", addr,
+ command);
+ return -EIO;
+ }
+ *value = rval & 0xff;
+ return 0;
+}
+
+/*
+ * Perform a transfer over SMBUS. This thing is called under
+ * the i2c bus lock, so we shouldn't race with ourselves...
+ */
+static int cafe_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
+ unsigned short flags, char rw, u8 command,
+ int size, union i2c_smbus_data *data)
+{
+ struct cafe_camera *cam = i2c_get_adapdata(adapter);
+ int ret = -EINVAL;
+
+ /*
+ * This interface would appear to only do byte data ops. OK
+ * it can do word too, but the cam chip has no use for that.
+ */
+ if (size != I2C_SMBUS_BYTE_DATA) {
+ cam_err(cam, "funky xfer size %d\n", size);
+ return -EINVAL;
+ }
+
+ if (rw == I2C_SMBUS_WRITE)
+ ret = cafe_smbus_write_data(cam, addr, command, data->byte);
+ else if (rw == I2C_SMBUS_READ)
+ ret = cafe_smbus_read_data(cam, addr, command, &data->byte);
+ return ret;
+}
+
+
+static void cafe_smbus_enable_irq(struct cafe_camera *cam)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&cam->mcam.dev_lock, flags);
+ mcam_reg_set_bit(&cam->mcam, REG_IRQMASK, TWSIIRQS);
+ spin_unlock_irqrestore(&cam->mcam.dev_lock, flags);
+}
+
+static u32 cafe_smbus_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_SMBUS_READ_BYTE_DATA |
+ I2C_FUNC_SMBUS_WRITE_BYTE_DATA;
+}
+
+static const struct i2c_algorithm cafe_smbus_algo = {
+ .smbus_xfer = cafe_smbus_xfer,
+ .functionality = cafe_smbus_func
+};
+
+static int cafe_smbus_setup(struct cafe_camera *cam)
+{
+ struct i2c_adapter *adap;
+ int ret;
+
+ adap = kzalloc(sizeof(*adap), GFP_KERNEL);
+ if (adap == NULL)
+ return -ENOMEM;
+ adap->owner = THIS_MODULE;
+ adap->algo = &cafe_smbus_algo;
+ strscpy(adap->name, "cafe_ccic", sizeof(adap->name));
+ adap->dev.parent = &cam->pdev->dev;
+ i2c_set_adapdata(adap, cam);
+ ret = i2c_add_adapter(adap);
+ if (ret) {
+ printk(KERN_ERR "Unable to register cafe i2c adapter\n");
+ kfree(adap);
+ return ret;
+ }
+
+ cam->i2c_adapter = adap;
+ cafe_smbus_enable_irq(cam);
+ return 0;
+}
+
+static void cafe_smbus_shutdown(struct cafe_camera *cam)
+{
+ i2c_del_adapter(cam->i2c_adapter);
+ kfree(cam->i2c_adapter);
+}
+
+
+/*
+ * Controller-level stuff
+ */
+
+static void cafe_ctlr_init(struct mcam_camera *mcam)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&mcam->dev_lock, flags);
+ /*
+ * Added magic to bring up the hardware on the B-Test board
+ */
+ mcam_reg_write(mcam, 0x3038, 0x8);
+ mcam_reg_write(mcam, 0x315c, 0x80008);
+ /*
+ * Go through the dance needed to wake the device up.
+ * Note that these registers are global and shared
+ * with the NAND and SD devices. Interaction between the
+ * three still needs to be examined.
+ */
+ mcam_reg_write(mcam, REG_GL_CSR, GCSR_SRS|GCSR_MRS); /* Needed? */
+ mcam_reg_write(mcam, REG_GL_CSR, GCSR_SRC|GCSR_MRC);
+ mcam_reg_write(mcam, REG_GL_CSR, GCSR_SRC|GCSR_MRS);
+ /*
+ * Here we must wait a bit for the controller to come around.
+ */
+ spin_unlock_irqrestore(&mcam->dev_lock, flags);
+ msleep(5);
+ spin_lock_irqsave(&mcam->dev_lock, flags);
+
+ mcam_reg_write(mcam, REG_GL_CSR, GCSR_CCIC_EN|GCSR_SRC|GCSR_MRC);
+ mcam_reg_set_bit(mcam, REG_GL_IMASK, GIMSK_CCIC_EN);
+ /*
+ * Mask all interrupts.
+ */
+ mcam_reg_write(mcam, REG_IRQMASK, 0);
+ spin_unlock_irqrestore(&mcam->dev_lock, flags);
+}
+
+
+static int cafe_ctlr_power_up(struct mcam_camera *mcam)
+{
+ /*
+ * Part one of the sensor dance: turn the global
+ * GPIO signal on.
+ */
+ mcam_reg_write(mcam, REG_GL_FCR, GFCR_GPIO_ON);
+ mcam_reg_write(mcam, REG_GL_GPIOR, GGPIO_OUT|GGPIO_VAL);
+ /*
+ * Put the sensor into operational mode (assumes OLPC-style
+ * wiring). Control 0 is reset - set to 1 to operate.
+ * Control 1 is power down, set to 0 to operate.
+ */
+ mcam_reg_write(mcam, REG_GPR, GPR_C1EN|GPR_C0EN); /* pwr up, reset */
+ mcam_reg_write(mcam, REG_GPR, GPR_C1EN|GPR_C0EN|GPR_C0);
+
+ return 0;
+}
+
+static void cafe_ctlr_power_down(struct mcam_camera *mcam)
+{
+ mcam_reg_write(mcam, REG_GPR, GPR_C1EN|GPR_C0EN|GPR_C1);
+ mcam_reg_write(mcam, REG_GL_FCR, GFCR_GPIO_ON);
+ mcam_reg_write(mcam, REG_GL_GPIOR, GGPIO_OUT);
+}
+
+
+
+/*
+ * The platform interrupt handler.
+ */
+static irqreturn_t cafe_irq(int irq, void *data)
+{
+ struct cafe_camera *cam = data;
+ struct mcam_camera *mcam = &cam->mcam;
+ unsigned int irqs, handled;
+
+ spin_lock(&mcam->dev_lock);
+ irqs = mcam_reg_read(mcam, REG_IRQSTAT);
+ handled = cam->registered && mccic_irq(mcam, irqs);
+ if (irqs & TWSIIRQS) {
+ mcam_reg_write(mcam, REG_IRQSTAT, TWSIIRQS);
+ wake_up(&cam->smbus_wait);
+ handled = 1;
+ }
+ spin_unlock(&mcam->dev_lock);
+ return IRQ_RETVAL(handled);
+}
+
+/* -------------------------------------------------------------------------- */
+
+static struct ov7670_config sensor_cfg = {
+ /*
+ * Exclude QCIF mode, because it only captures a tiny portion
+ * of the sensor FOV
+ */
+ .min_width = 320,
+ .min_height = 240,
+
+ /*
+ * Set the clock speed for the XO 1; I don't believe this
+ * driver has ever run anywhere else.
+ */
+ .clock_speed = 45,
+ .use_smbus = 1,
+};
+
+static struct i2c_board_info ov7670_info = {
+ .type = "ov7670",
+ .addr = 0x42 >> 1,
+ .platform_data = &sensor_cfg,
+};
+
+/* -------------------------------------------------------------------------- */
+/*
+ * PCI interface stuff.
+ */
+
+static int cafe_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ int ret;
+ struct cafe_camera *cam;
+ struct mcam_camera *mcam;
+ struct v4l2_async_subdev *asd;
+ struct i2c_client *i2c_dev;
+
+ /*
+ * Start putting together one of our big camera structures.
+ */
+ ret = -ENOMEM;
+ cam = kzalloc(sizeof(struct cafe_camera), GFP_KERNEL);
+ if (cam == NULL)
+ goto out;
+ pci_set_drvdata(pdev, cam);
+ cam->pdev = pdev;
+ mcam = &cam->mcam;
+ mcam->chip_id = MCAM_CAFE;
+ spin_lock_init(&mcam->dev_lock);
+ init_waitqueue_head(&cam->smbus_wait);
+ mcam->plat_power_up = cafe_ctlr_power_up;
+ mcam->plat_power_down = cafe_ctlr_power_down;
+ mcam->dev = &pdev->dev;
+ /*
+ * Vmalloc mode for buffers is traditional with this driver.
+ * We *might* be able to run DMA_contig, especially on a system
+ * with CMA in it.
+ */
+ mcam->buffer_mode = B_vmalloc;
+ /*
+ * Get set up on the PCI bus.
+ */
+ ret = pci_enable_device(pdev);
+ if (ret)
+ goto out_free;
+ pci_set_master(pdev);
+
+ ret = -EIO;
+ mcam->regs = pci_iomap(pdev, 0, 0);
+ if (!mcam->regs) {
+ printk(KERN_ERR "Unable to ioremap cafe-ccic regs\n");
+ goto out_disable;
+ }
+ mcam->regs_size = pci_resource_len(pdev, 0);
+ ret = request_irq(pdev->irq, cafe_irq, IRQF_SHARED, "cafe-ccic", cam);
+ if (ret)
+ goto out_iounmap;
+
+ /*
+ * Initialize the controller.
+ */
+ cafe_ctlr_init(mcam);
+
+ /*
+ * Set up I2C/SMBUS communications. We have to drop the mutex here
+ * because the sensor could attach in this call chain, leading to
+ * unsightly deadlocks.
+ */
+ ret = cafe_smbus_setup(cam);
+ if (ret)
+ goto out_pdown;
+
+ v4l2_async_nf_init(&mcam->notifier);
+
+ asd = v4l2_async_nf_add_i2c(&mcam->notifier,
+ i2c_adapter_id(cam->i2c_adapter),
+ ov7670_info.addr, struct v4l2_async_subdev);
+ if (IS_ERR(asd)) {
+ ret = PTR_ERR(asd);
+ goto out_smbus_shutdown;
+ }
+
+ ret = mccic_register(mcam);
+ if (ret)
+ goto out_smbus_shutdown;
+
+ clkdev_create(mcam->mclk, "xclk", "%d-%04x",
+ i2c_adapter_id(cam->i2c_adapter), ov7670_info.addr);
+
+ i2c_dev = i2c_new_client_device(cam->i2c_adapter, &ov7670_info);
+ if (IS_ERR(i2c_dev)) {
+ ret = PTR_ERR(i2c_dev);
+ goto out_mccic_shutdown;
+ }
+
+ cam->registered = 1;
+ return 0;
+
+out_mccic_shutdown:
+ mccic_shutdown(mcam);
+out_smbus_shutdown:
+ cafe_smbus_shutdown(cam);
+out_pdown:
+ cafe_ctlr_power_down(mcam);
+ free_irq(pdev->irq, cam);
+out_iounmap:
+ pci_iounmap(pdev, mcam->regs);
+out_disable:
+ pci_disable_device(pdev);
+out_free:
+ kfree(cam);
+out:
+ return ret;
+}
+
+
+/*
+ * Shut down an initialized device
+ */
+static void cafe_shutdown(struct cafe_camera *cam)
+{
+ mccic_shutdown(&cam->mcam);
+ cafe_smbus_shutdown(cam);
+ free_irq(cam->pdev->irq, cam);
+ pci_iounmap(cam->pdev, cam->mcam.regs);
+}
+
+
+static void cafe_pci_remove(struct pci_dev *pdev)
+{
+ struct cafe_camera *cam = pci_get_drvdata(pdev);
+
+ if (cam == NULL) {
+ printk(KERN_WARNING "pci_remove on unknown pdev %p\n", pdev);
+ return;
+ }
+ cafe_shutdown(cam);
+ kfree(cam);
+}
+
+
+/*
+ * Basic power management.
+ */
+static int __maybe_unused cafe_pci_suspend(struct device *dev)
+{
+ struct cafe_camera *cam = dev_get_drvdata(dev);
+
+ mccic_suspend(&cam->mcam);
+ return 0;
+}
+
+
+static int __maybe_unused cafe_pci_resume(struct device *dev)
+{
+ struct cafe_camera *cam = dev_get_drvdata(dev);
+
+ cafe_ctlr_init(&cam->mcam);
+ return mccic_resume(&cam->mcam);
+}
+
+static const struct pci_device_id cafe_ids[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL,
+ PCI_DEVICE_ID_MARVELL_88ALP01_CCIC) },
+ { 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, cafe_ids);
+
+static SIMPLE_DEV_PM_OPS(cafe_pci_pm_ops, cafe_pci_suspend, cafe_pci_resume);
+
+static struct pci_driver cafe_pci_driver = {
+ .name = "cafe1000-ccic",
+ .id_table = cafe_ids,
+ .probe = cafe_pci_probe,
+ .remove = cafe_pci_remove,
+ .driver.pm = &cafe_pci_pm_ops,
+};
+
+
+
+
+static int __init cafe_init(void)
+{
+ int ret;
+
+ printk(KERN_NOTICE "Marvell M88ALP01 'CAFE' Camera Controller version %d\n",
+ CAFE_VERSION);
+ ret = pci_register_driver(&cafe_pci_driver);
+ if (ret) {
+ printk(KERN_ERR "Unable to register cafe_ccic driver\n");
+ goto out;
+ }
+ ret = 0;
+
+out:
+ return ret;
+}
+
+
+static void __exit cafe_exit(void)
+{
+ pci_unregister_driver(&cafe_pci_driver);
+}
+
+module_init(cafe_init);
+module_exit(cafe_exit);