summaryrefslogtreecommitdiffstats
path: root/drivers/media/tuners/mt2060.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/tuners/mt2060.c')
-rw-r--r--drivers/media/tuners/mt2060.c537
1 files changed, 537 insertions, 0 deletions
diff --git a/drivers/media/tuners/mt2060.c b/drivers/media/tuners/mt2060.c
new file mode 100644
index 000000000..da7e23c26
--- /dev/null
+++ b/drivers/media/tuners/mt2060.c
@@ -0,0 +1,537 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Driver for Microtune MT2060 "Single chip dual conversion broadband tuner"
+ *
+ * Copyright (c) 2006 Olivier DANET <odanet@caramail.com>
+ */
+
+/* In that file, frequencies are expressed in kiloHertz to avoid 32 bits overflows */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/dvb/frontend.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+
+#include <media/dvb_frontend.h>
+
+#include "mt2060.h"
+#include "mt2060_priv.h"
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
+
+#define dprintk(args...) do { if (debug) {printk(KERN_DEBUG "MT2060: " args); printk("\n"); }} while (0)
+
+// Reads a single register
+static int mt2060_readreg(struct mt2060_priv *priv, u8 reg, u8 *val)
+{
+ struct i2c_msg msg[2] = {
+ { .addr = priv->cfg->i2c_address, .flags = 0, .len = 1 },
+ { .addr = priv->cfg->i2c_address, .flags = I2C_M_RD, .len = 1 },
+ };
+ int rc = 0;
+ u8 *b;
+
+ b = kmalloc(2, GFP_KERNEL);
+ if (!b)
+ return -ENOMEM;
+
+ b[0] = reg;
+ b[1] = 0;
+
+ msg[0].buf = b;
+ msg[1].buf = b + 1;
+
+ if (i2c_transfer(priv->i2c, msg, 2) != 2) {
+ printk(KERN_WARNING "mt2060 I2C read failed\n");
+ rc = -EREMOTEIO;
+ }
+ *val = b[1];
+ kfree(b);
+
+ return rc;
+}
+
+// Writes a single register
+static int mt2060_writereg(struct mt2060_priv *priv, u8 reg, u8 val)
+{
+ struct i2c_msg msg = {
+ .addr = priv->cfg->i2c_address, .flags = 0, .len = 2
+ };
+ u8 *buf;
+ int rc = 0;
+
+ buf = kmalloc(2, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ buf[0] = reg;
+ buf[1] = val;
+
+ msg.buf = buf;
+
+ if (i2c_transfer(priv->i2c, &msg, 1) != 1) {
+ printk(KERN_WARNING "mt2060 I2C write failed\n");
+ rc = -EREMOTEIO;
+ }
+ kfree(buf);
+ return rc;
+}
+
+// Writes a set of consecutive registers
+static int mt2060_writeregs(struct mt2060_priv *priv,u8 *buf, u8 len)
+{
+ int rem, val_len;
+ u8 *xfer_buf;
+ int rc = 0;
+ struct i2c_msg msg = {
+ .addr = priv->cfg->i2c_address, .flags = 0
+ };
+
+ xfer_buf = kmalloc(16, GFP_KERNEL);
+ if (!xfer_buf)
+ return -ENOMEM;
+
+ msg.buf = xfer_buf;
+
+ for (rem = len - 1; rem > 0; rem -= priv->i2c_max_regs) {
+ val_len = min_t(int, rem, priv->i2c_max_regs);
+ msg.len = 1 + val_len;
+ xfer_buf[0] = buf[0] + len - 1 - rem;
+ memcpy(&xfer_buf[1], &buf[1 + len - 1 - rem], val_len);
+
+ if (i2c_transfer(priv->i2c, &msg, 1) != 1) {
+ printk(KERN_WARNING "mt2060 I2C write failed (len=%i)\n", val_len);
+ rc = -EREMOTEIO;
+ break;
+ }
+ }
+
+ kfree(xfer_buf);
+ return rc;
+}
+
+// Initialisation sequences
+// LNABAND=3, NUM1=0x3C, DIV1=0x74, NUM2=0x1080, DIV2=0x49
+static u8 mt2060_config1[] = {
+ REG_LO1C1,
+ 0x3F, 0x74, 0x00, 0x08, 0x93
+};
+
+// FMCG=2, GP2=0, GP1=0
+static u8 mt2060_config2[] = {
+ REG_MISC_CTRL,
+ 0x20, 0x1E, 0x30, 0xff, 0x80, 0xff, 0x00, 0x2c, 0x42
+};
+
+// VGAG=3, V1CSE=1
+
+#ifdef MT2060_SPURCHECK
+/* The function below calculates the frequency offset between the output frequency if2
+ and the closer cross modulation subcarrier between lo1 and lo2 up to the tenth harmonic */
+static int mt2060_spurcalc(u32 lo1,u32 lo2,u32 if2)
+{
+ int I,J;
+ int dia,diamin,diff;
+ diamin=1000000;
+ for (I = 1; I < 10; I++) {
+ J = ((2*I*lo1)/lo2+1)/2;
+ diff = I*(int)lo1-J*(int)lo2;
+ if (diff < 0) diff=-diff;
+ dia = (diff-(int)if2);
+ if (dia < 0) dia=-dia;
+ if (diamin > dia) diamin=dia;
+ }
+ return diamin;
+}
+
+#define BANDWIDTH 4000 // kHz
+
+/* Calculates the frequency offset to add to avoid spurs. Returns 0 if no offset is needed */
+static int mt2060_spurcheck(u32 lo1,u32 lo2,u32 if2)
+{
+ u32 Spur,Sp1,Sp2;
+ int I,J;
+ I=0;
+ J=1000;
+
+ Spur=mt2060_spurcalc(lo1,lo2,if2);
+ if (Spur < BANDWIDTH) {
+ /* Potential spurs detected */
+ dprintk("Spurs before : f_lo1: %d f_lo2: %d (kHz)",
+ (int)lo1,(int)lo2);
+ I=1000;
+ Sp1 = mt2060_spurcalc(lo1+I,lo2+I,if2);
+ Sp2 = mt2060_spurcalc(lo1-I,lo2-I,if2);
+
+ if (Sp1 < Sp2) {
+ J=-J; I=-I; Spur=Sp2;
+ } else
+ Spur=Sp1;
+
+ while (Spur < BANDWIDTH) {
+ I += J;
+ Spur = mt2060_spurcalc(lo1+I,lo2+I,if2);
+ }
+ dprintk("Spurs after : f_lo1: %d f_lo2: %d (kHz)",
+ (int)(lo1+I),(int)(lo2+I));
+ }
+ return I;
+}
+#endif
+
+#define IF2 36150 // IF2 frequency = 36.150 MHz
+#define FREF 16000 // Quartz oscillator 16 MHz
+
+static int mt2060_set_params(struct dvb_frontend *fe)
+{
+ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+ struct mt2060_priv *priv;
+ int i=0;
+ u32 freq;
+ u8 lnaband;
+ u32 f_lo1,f_lo2;
+ u32 div1,num1,div2,num2;
+ u8 b[8];
+ u32 if1;
+
+ priv = fe->tuner_priv;
+
+ if1 = priv->if1_freq;
+ b[0] = REG_LO1B1;
+ b[1] = 0xFF;
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */
+
+ mt2060_writeregs(priv,b,2);
+
+ freq = c->frequency / 1000; /* Hz -> kHz */
+
+ f_lo1 = freq + if1 * 1000;
+ f_lo1 = (f_lo1 / 250) * 250;
+ f_lo2 = f_lo1 - freq - IF2;
+ // From the Comtech datasheet, the step used is 50kHz. The tuner chip could be more precise
+ f_lo2 = ((f_lo2 + 25) / 50) * 50;
+ priv->frequency = (f_lo1 - f_lo2 - IF2) * 1000;
+
+#ifdef MT2060_SPURCHECK
+ // LO-related spurs detection and correction
+ num1 = mt2060_spurcheck(f_lo1,f_lo2,IF2);
+ f_lo1 += num1;
+ f_lo2 += num1;
+#endif
+ //Frequency LO1 = 16MHz * (DIV1 + NUM1/64 )
+ num1 = f_lo1 / (FREF / 64);
+ div1 = num1 / 64;
+ num1 &= 0x3f;
+
+ // Frequency LO2 = 16MHz * (DIV2 + NUM2/8192 )
+ num2 = f_lo2 * 64 / (FREF / 128);
+ div2 = num2 / 8192;
+ num2 &= 0x1fff;
+
+ if (freq <= 95000) lnaband = 0xB0; else
+ if (freq <= 180000) lnaband = 0xA0; else
+ if (freq <= 260000) lnaband = 0x90; else
+ if (freq <= 335000) lnaband = 0x80; else
+ if (freq <= 425000) lnaband = 0x70; else
+ if (freq <= 480000) lnaband = 0x60; else
+ if (freq <= 570000) lnaband = 0x50; else
+ if (freq <= 645000) lnaband = 0x40; else
+ if (freq <= 730000) lnaband = 0x30; else
+ if (freq <= 810000) lnaband = 0x20; else lnaband = 0x10;
+
+ b[0] = REG_LO1C1;
+ b[1] = lnaband | ((num1 >>2) & 0x0F);
+ b[2] = div1;
+ b[3] = (num2 & 0x0F) | ((num1 & 3) << 4);
+ b[4] = num2 >> 4;
+ b[5] = ((num2 >>12) & 1) | (div2 << 1);
+
+ dprintk("IF1: %dMHz",(int)if1);
+ dprintk("PLL freq=%dkHz f_lo1=%dkHz f_lo2=%dkHz",(int)freq,(int)f_lo1,(int)f_lo2);
+ dprintk("PLL div1=%d num1=%d div2=%d num2=%d",(int)div1,(int)num1,(int)div2,(int)num2);
+ dprintk("PLL [1..5]: %2x %2x %2x %2x %2x",(int)b[1],(int)b[2],(int)b[3],(int)b[4],(int)b[5]);
+
+ mt2060_writeregs(priv,b,6);
+
+ //Waits for pll lock or timeout
+ i = 0;
+ do {
+ mt2060_readreg(priv,REG_LO_STATUS,b);
+ if ((b[0] & 0x88)==0x88)
+ break;
+ msleep(4);
+ i++;
+ } while (i<10);
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */
+
+ return 0;
+}
+
+static void mt2060_calibrate(struct mt2060_priv *priv)
+{
+ u8 b = 0;
+ int i = 0;
+
+ if (mt2060_writeregs(priv,mt2060_config1,sizeof(mt2060_config1)))
+ return;
+ if (mt2060_writeregs(priv,mt2060_config2,sizeof(mt2060_config2)))
+ return;
+
+ /* initialize the clock output */
+ mt2060_writereg(priv, REG_VGAG, (priv->cfg->clock_out << 6) | 0x30);
+
+ do {
+ b |= (1 << 6); // FM1SS;
+ mt2060_writereg(priv, REG_LO2C1,b);
+ msleep(20);
+
+ if (i == 0) {
+ b |= (1 << 7); // FM1CA;
+ mt2060_writereg(priv, REG_LO2C1,b);
+ b &= ~(1 << 7); // FM1CA;
+ msleep(20);
+ }
+
+ b &= ~(1 << 6); // FM1SS
+ mt2060_writereg(priv, REG_LO2C1,b);
+
+ msleep(20);
+ i++;
+ } while (i < 9);
+
+ i = 0;
+ while (i++ < 10 && mt2060_readreg(priv, REG_MISC_STAT, &b) == 0 && (b & (1 << 6)) == 0)
+ msleep(20);
+
+ if (i <= 10) {
+ mt2060_readreg(priv, REG_FM_FREQ, &priv->fmfreq); // now find out, what is fmreq used for :)
+ dprintk("calibration was successful: %d", (int)priv->fmfreq);
+ } else
+ dprintk("FMCAL timed out");
+}
+
+static int mt2060_get_frequency(struct dvb_frontend *fe, u32 *frequency)
+{
+ struct mt2060_priv *priv = fe->tuner_priv;
+ *frequency = priv->frequency;
+ return 0;
+}
+
+static int mt2060_get_if_frequency(struct dvb_frontend *fe, u32 *frequency)
+{
+ *frequency = IF2 * 1000;
+ return 0;
+}
+
+static int mt2060_init(struct dvb_frontend *fe)
+{
+ struct mt2060_priv *priv = fe->tuner_priv;
+ int ret;
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */
+
+ if (priv->sleep) {
+ ret = mt2060_writereg(priv, REG_MISC_CTRL, 0x20);
+ if (ret)
+ goto err_i2c_gate_ctrl;
+ }
+
+ ret = mt2060_writereg(priv, REG_VGAG,
+ (priv->cfg->clock_out << 6) | 0x33);
+
+err_i2c_gate_ctrl:
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */
+
+ return ret;
+}
+
+static int mt2060_sleep(struct dvb_frontend *fe)
+{
+ struct mt2060_priv *priv = fe->tuner_priv;
+ int ret;
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */
+
+ ret = mt2060_writereg(priv, REG_VGAG,
+ (priv->cfg->clock_out << 6) | 0x30);
+ if (ret)
+ goto err_i2c_gate_ctrl;
+
+ if (priv->sleep)
+ ret = mt2060_writereg(priv, REG_MISC_CTRL, 0xe8);
+
+err_i2c_gate_ctrl:
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */
+
+ return ret;
+}
+
+static void mt2060_release(struct dvb_frontend *fe)
+{
+ kfree(fe->tuner_priv);
+ fe->tuner_priv = NULL;
+}
+
+static const struct dvb_tuner_ops mt2060_tuner_ops = {
+ .info = {
+ .name = "Microtune MT2060",
+ .frequency_min_hz = 48 * MHz,
+ .frequency_max_hz = 860 * MHz,
+ .frequency_step_hz = 50 * kHz,
+ },
+
+ .release = mt2060_release,
+
+ .init = mt2060_init,
+ .sleep = mt2060_sleep,
+
+ .set_params = mt2060_set_params,
+ .get_frequency = mt2060_get_frequency,
+ .get_if_frequency = mt2060_get_if_frequency,
+};
+
+/* This functions tries to identify a MT2060 tuner by reading the PART/REV register. This is hasty. */
+struct dvb_frontend * mt2060_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct mt2060_config *cfg, u16 if1)
+{
+ struct mt2060_priv *priv = NULL;
+ u8 id = 0;
+
+ priv = kzalloc(sizeof(struct mt2060_priv), GFP_KERNEL);
+ if (priv == NULL)
+ return NULL;
+
+ priv->cfg = cfg;
+ priv->i2c = i2c;
+ priv->if1_freq = if1;
+ priv->i2c_max_regs = ~0;
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */
+
+ if (mt2060_readreg(priv,REG_PART_REV,&id) != 0) {
+ kfree(priv);
+ return NULL;
+ }
+
+ if (id != PART_REV) {
+ kfree(priv);
+ return NULL;
+ }
+ printk(KERN_INFO "MT2060: successfully identified (IF1 = %d)\n", if1);
+ memcpy(&fe->ops.tuner_ops, &mt2060_tuner_ops, sizeof(struct dvb_tuner_ops));
+
+ fe->tuner_priv = priv;
+
+ mt2060_calibrate(priv);
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */
+
+ return fe;
+}
+EXPORT_SYMBOL_GPL(mt2060_attach);
+
+static int mt2060_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct mt2060_platform_data *pdata = client->dev.platform_data;
+ struct dvb_frontend *fe;
+ struct mt2060_priv *dev;
+ int ret;
+ u8 chip_id;
+
+ dev_dbg(&client->dev, "\n");
+
+ if (!pdata) {
+ dev_err(&client->dev, "Cannot proceed without platform data\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ dev = devm_kzalloc(&client->dev, sizeof(*dev), GFP_KERNEL);
+ if (!dev) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ fe = pdata->dvb_frontend;
+ dev->config.i2c_address = client->addr;
+ dev->config.clock_out = pdata->clock_out;
+ dev->cfg = &dev->config;
+ dev->i2c = client->adapter;
+ dev->if1_freq = pdata->if1 ? pdata->if1 : 1220;
+ dev->client = client;
+ dev->i2c_max_regs = pdata->i2c_write_max ? pdata->i2c_write_max - 1 : ~0;
+ dev->sleep = true;
+
+ ret = mt2060_readreg(dev, REG_PART_REV, &chip_id);
+ if (ret) {
+ ret = -ENODEV;
+ goto err;
+ }
+
+ dev_dbg(&client->dev, "chip id=%02x\n", chip_id);
+
+ if (chip_id != PART_REV) {
+ ret = -ENODEV;
+ goto err;
+ }
+
+ /* Power on, calibrate, sleep */
+ ret = mt2060_writereg(dev, REG_MISC_CTRL, 0x20);
+ if (ret)
+ goto err;
+ mt2060_calibrate(dev);
+ ret = mt2060_writereg(dev, REG_MISC_CTRL, 0xe8);
+ if (ret)
+ goto err;
+
+ dev_info(&client->dev, "Microtune MT2060 successfully identified\n");
+ memcpy(&fe->ops.tuner_ops, &mt2060_tuner_ops, sizeof(fe->ops.tuner_ops));
+ fe->ops.tuner_ops.release = NULL;
+ fe->tuner_priv = dev;
+ i2c_set_clientdata(client, dev);
+
+ return 0;
+err:
+ dev_dbg(&client->dev, "failed=%d\n", ret);
+ return ret;
+}
+
+static void mt2060_remove(struct i2c_client *client)
+{
+ dev_dbg(&client->dev, "\n");
+}
+
+static const struct i2c_device_id mt2060_id_table[] = {
+ {"mt2060", 0},
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, mt2060_id_table);
+
+static struct i2c_driver mt2060_driver = {
+ .driver = {
+ .name = "mt2060",
+ .suppress_bind_attrs = true,
+ },
+ .probe = mt2060_probe,
+ .remove = mt2060_remove,
+ .id_table = mt2060_id_table,
+};
+
+module_i2c_driver(mt2060_driver);
+
+MODULE_AUTHOR("Olivier DANET");
+MODULE_DESCRIPTION("Microtune MT2060 silicon tuner driver");
+MODULE_LICENSE("GPL");
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-26 13:11:03 +0000