summaryrefslogtreecommitdiffstats
path: root/drivers/mmc/host/sdhci-s3c.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mmc/host/sdhci-s3c.c')
-rw-r--r--drivers/mmc/host/sdhci-s3c.c793
1 files changed, 793 insertions, 0 deletions
diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
new file mode 100644
index 000000000..9085f3932
--- /dev/null
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -0,0 +1,793 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* linux/drivers/mmc/host/sdhci-s3c.c
+ *
+ * Copyright 2008 Openmoko Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * SDHCI (HSMMC) support for Samsung SoC
+ */
+
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/mmc-sdhci-s3c.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+
+#include <linux/mmc/host.h>
+
+#include "sdhci.h"
+
+#define MAX_BUS_CLK (4)
+
+#define S3C_SDHCI_CONTROL2 (0x80)
+#define S3C_SDHCI_CONTROL3 (0x84)
+#define S3C64XX_SDHCI_CONTROL4 (0x8C)
+
+#define S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR BIT(31)
+#define S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK BIT(30)
+#define S3C_SDHCI_CTRL2_CDINVRXD3 BIT(29)
+#define S3C_SDHCI_CTRL2_SLCARDOUT BIT(28)
+
+#define S3C_SDHCI_CTRL2_FLTCLKSEL_MASK (0xf << 24)
+#define S3C_SDHCI_CTRL2_FLTCLKSEL_SHIFT (24)
+#define S3C_SDHCI_CTRL2_FLTCLKSEL(_x) ((_x) << 24)
+
+#define S3C_SDHCI_CTRL2_LVLDAT_MASK (0xff << 16)
+#define S3C_SDHCI_CTRL2_LVLDAT_SHIFT (16)
+#define S3C_SDHCI_CTRL2_LVLDAT(_x) ((_x) << 16)
+
+#define S3C_SDHCI_CTRL2_ENFBCLKTX BIT(15)
+#define S3C_SDHCI_CTRL2_ENFBCLKRX BIT(14)
+#define S3C_SDHCI_CTRL2_SDCDSEL BIT(13)
+#define S3C_SDHCI_CTRL2_SDSIGPC BIT(12)
+#define S3C_SDHCI_CTRL2_ENBUSYCHKTXSTART BIT(11)
+
+#define S3C_SDHCI_CTRL2_DFCNT_MASK (0x3 << 9)
+#define S3C_SDHCI_CTRL2_DFCNT_SHIFT (9)
+#define S3C_SDHCI_CTRL2_DFCNT_NONE (0x0 << 9)
+#define S3C_SDHCI_CTRL2_DFCNT_4SDCLK (0x1 << 9)
+#define S3C_SDHCI_CTRL2_DFCNT_16SDCLK (0x2 << 9)
+#define S3C_SDHCI_CTRL2_DFCNT_64SDCLK (0x3 << 9)
+
+#define S3C_SDHCI_CTRL2_ENCLKOUTHOLD BIT(8)
+#define S3C_SDHCI_CTRL2_RWAITMODE BIT(7)
+#define S3C_SDHCI_CTRL2_DISBUFRD BIT(6)
+
+#define S3C_SDHCI_CTRL2_SELBASECLK_MASK (0x3 << 4)
+#define S3C_SDHCI_CTRL2_SELBASECLK_SHIFT (4)
+#define S3C_SDHCI_CTRL2_PWRSYNC BIT(3)
+#define S3C_SDHCI_CTRL2_ENCLKOUTMSKCON BIT(1)
+#define S3C_SDHCI_CTRL2_HWINITFIN BIT(0)
+
+#define S3C_SDHCI_CTRL3_FCSEL3 BIT(31)
+#define S3C_SDHCI_CTRL3_FCSEL2 BIT(23)
+#define S3C_SDHCI_CTRL3_FCSEL1 BIT(15)
+#define S3C_SDHCI_CTRL3_FCSEL0 BIT(7)
+
+#define S3C_SDHCI_CTRL3_FIA3_MASK (0x7f << 24)
+#define S3C_SDHCI_CTRL3_FIA3_SHIFT (24)
+#define S3C_SDHCI_CTRL3_FIA3(_x) ((_x) << 24)
+
+#define S3C_SDHCI_CTRL3_FIA2_MASK (0x7f << 16)
+#define S3C_SDHCI_CTRL3_FIA2_SHIFT (16)
+#define S3C_SDHCI_CTRL3_FIA2(_x) ((_x) << 16)
+
+#define S3C_SDHCI_CTRL3_FIA1_MASK (0x7f << 8)
+#define S3C_SDHCI_CTRL3_FIA1_SHIFT (8)
+#define S3C_SDHCI_CTRL3_FIA1(_x) ((_x) << 8)
+
+#define S3C_SDHCI_CTRL3_FIA0_MASK (0x7f << 0)
+#define S3C_SDHCI_CTRL3_FIA0_SHIFT (0)
+#define S3C_SDHCI_CTRL3_FIA0(_x) ((_x) << 0)
+
+#define S3C64XX_SDHCI_CONTROL4_DRIVE_MASK (0x3 << 16)
+#define S3C64XX_SDHCI_CONTROL4_DRIVE_SHIFT (16)
+#define S3C64XX_SDHCI_CONTROL4_DRIVE_2mA (0x0 << 16)
+#define S3C64XX_SDHCI_CONTROL4_DRIVE_4mA (0x1 << 16)
+#define S3C64XX_SDHCI_CONTROL4_DRIVE_7mA (0x2 << 16)
+#define S3C64XX_SDHCI_CONTROL4_DRIVE_9mA (0x3 << 16)
+
+#define S3C64XX_SDHCI_CONTROL4_BUSY (1)
+
+/**
+ * struct sdhci_s3c - S3C SDHCI instance
+ * @host: The SDHCI host created
+ * @pdev: The platform device we where created from.
+ * @ioarea: The resource created when we claimed the IO area.
+ * @pdata: The platform data for this controller.
+ * @cur_clk: The index of the current bus clock.
+ * @ext_cd_irq: External card detect interrupt.
+ * @clk_io: The clock for the internal bus interface.
+ * @clk_rates: Clock frequencies.
+ * @clk_bus: The clocks that are available for the SD/MMC bus clock.
+ * @no_divider: No or non-standard internal clock divider.
+ */
+struct sdhci_s3c {
+ struct sdhci_host *host;
+ struct platform_device *pdev;
+ struct resource *ioarea;
+ struct s3c_sdhci_platdata *pdata;
+ int cur_clk;
+ int ext_cd_irq;
+
+ struct clk *clk_io;
+ struct clk *clk_bus[MAX_BUS_CLK];
+ unsigned long clk_rates[MAX_BUS_CLK];
+
+ bool no_divider;
+};
+
+/**
+ * struct sdhci_s3c_drv_data - S3C SDHCI platform specific driver data
+ * @sdhci_quirks: sdhci host specific quirks.
+ * @no_divider: no or non-standard internal clock divider.
+ *
+ * Specifies platform specific configuration of sdhci controller.
+ * Note: A structure for driver specific platform data is used for future
+ * expansion of its usage.
+ */
+struct sdhci_s3c_drv_data {
+ unsigned int sdhci_quirks;
+ bool no_divider;
+};
+
+static inline struct sdhci_s3c *to_s3c(struct sdhci_host *host)
+{
+ return sdhci_priv(host);
+}
+
+/**
+ * sdhci_s3c_get_max_clk - callback to get maximum clock frequency.
+ * @host: The SDHCI host instance.
+ *
+ * Callback to return the maximum clock rate acheivable by the controller.
+*/
+static unsigned int sdhci_s3c_get_max_clk(struct sdhci_host *host)
+{
+ struct sdhci_s3c *ourhost = to_s3c(host);
+ unsigned long rate, max = 0;
+ int src;
+
+ for (src = 0; src < MAX_BUS_CLK; src++) {
+ rate = ourhost->clk_rates[src];
+ if (rate > max)
+ max = rate;
+ }
+
+ return max;
+}
+
+/**
+ * sdhci_s3c_consider_clock - consider one the bus clocks for current setting
+ * @ourhost: Our SDHCI instance.
+ * @src: The source clock index.
+ * @wanted: The clock frequency wanted.
+ */
+static unsigned int sdhci_s3c_consider_clock(struct sdhci_s3c *ourhost,
+ unsigned int src,
+ unsigned int wanted)
+{
+ unsigned long rate;
+ struct clk *clksrc = ourhost->clk_bus[src];
+ int shift;
+
+ if (IS_ERR(clksrc))
+ return UINT_MAX;
+
+ /*
+ * If controller uses a non-standard clock division, find the best clock
+ * speed possible with selected clock source and skip the division.
+ */
+ if (ourhost->no_divider) {
+ rate = clk_round_rate(clksrc, wanted);
+ return wanted - rate;
+ }
+
+ rate = ourhost->clk_rates[src];
+
+ for (shift = 0; shift <= 8; ++shift) {
+ if ((rate >> shift) <= wanted)
+ break;
+ }
+
+ if (shift > 8) {
+ dev_dbg(&ourhost->pdev->dev,
+ "clk %d: rate %ld, min rate %lu > wanted %u\n",
+ src, rate, rate / 256, wanted);
+ return UINT_MAX;
+ }
+
+ dev_dbg(&ourhost->pdev->dev, "clk %d: rate %ld, want %d, got %ld\n",
+ src, rate, wanted, rate >> shift);
+
+ return wanted - (rate >> shift);
+}
+
+/**
+ * sdhci_s3c_set_clock - callback on clock change
+ * @host: The SDHCI host being changed
+ * @clock: The clock rate being requested.
+ *
+ * When the card's clock is going to be changed, look at the new frequency
+ * and find the best clock source to go with it.
+*/
+static void sdhci_s3c_set_clock(struct sdhci_host *host, unsigned int clock)
+{
+ struct sdhci_s3c *ourhost = to_s3c(host);
+ unsigned int best = UINT_MAX;
+ unsigned int delta;
+ int best_src = 0;
+ int src;
+ u32 ctrl;
+
+ host->mmc->actual_clock = 0;
+
+ /* don't bother if the clock is going off. */
+ if (clock == 0) {
+ sdhci_set_clock(host, clock);
+ return;
+ }
+
+ for (src = 0; src < MAX_BUS_CLK; src++) {
+ delta = sdhci_s3c_consider_clock(ourhost, src, clock);
+ if (delta < best) {
+ best = delta;
+ best_src = src;
+ }
+ }
+
+ dev_dbg(&ourhost->pdev->dev,
+ "selected source %d, clock %d, delta %d\n",
+ best_src, clock, best);
+
+ /* select the new clock source */
+ if (ourhost->cur_clk != best_src) {
+ struct clk *clk = ourhost->clk_bus[best_src];
+
+ clk_prepare_enable(clk);
+ if (ourhost->cur_clk >= 0)
+ clk_disable_unprepare(
+ ourhost->clk_bus[ourhost->cur_clk]);
+
+ ourhost->cur_clk = best_src;
+ host->max_clk = ourhost->clk_rates[best_src];
+ }
+
+ /* turn clock off to card before changing clock source */
+ writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL);
+
+ ctrl = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
+ ctrl &= ~S3C_SDHCI_CTRL2_SELBASECLK_MASK;
+ ctrl |= best_src << S3C_SDHCI_CTRL2_SELBASECLK_SHIFT;
+ writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL2);
+
+ /* reprogram default hardware configuration */
+ writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA,
+ host->ioaddr + S3C64XX_SDHCI_CONTROL4);
+
+ ctrl = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
+ ctrl |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
+ S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
+ S3C_SDHCI_CTRL2_ENFBCLKRX |
+ S3C_SDHCI_CTRL2_DFCNT_NONE |
+ S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
+ writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL2);
+
+ /* reconfigure the controller for new clock rate */
+ ctrl = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
+ if (clock < 25 * 1000000)
+ ctrl |= (S3C_SDHCI_CTRL3_FCSEL3 | S3C_SDHCI_CTRL3_FCSEL2);
+ writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL3);
+
+ sdhci_set_clock(host, clock);
+}
+
+/**
+ * sdhci_s3c_get_min_clock - callback to get minimal supported clock value
+ * @host: The SDHCI host being queried
+ *
+ * To init mmc host properly a minimal clock value is needed. For high system
+ * bus clock's values the standard formula gives values out of allowed range.
+ * The clock still can be set to lower values, if clock source other then
+ * system bus is selected.
+*/
+static unsigned int sdhci_s3c_get_min_clock(struct sdhci_host *host)
+{
+ struct sdhci_s3c *ourhost = to_s3c(host);
+ unsigned long rate, min = ULONG_MAX;
+ int src;
+
+ for (src = 0; src < MAX_BUS_CLK; src++) {
+ rate = ourhost->clk_rates[src] / 256;
+ if (!rate)
+ continue;
+ if (rate < min)
+ min = rate;
+ }
+
+ return min;
+}
+
+/* sdhci_cmu_get_max_clk - callback to get maximum clock frequency.*/
+static unsigned int sdhci_cmu_get_max_clock(struct sdhci_host *host)
+{
+ struct sdhci_s3c *ourhost = to_s3c(host);
+ unsigned long rate, max = 0;
+ int src;
+
+ for (src = 0; src < MAX_BUS_CLK; src++) {
+ struct clk *clk;
+
+ clk = ourhost->clk_bus[src];
+ if (IS_ERR(clk))
+ continue;
+
+ rate = clk_round_rate(clk, ULONG_MAX);
+ if (rate > max)
+ max = rate;
+ }
+
+ return max;
+}
+
+/* sdhci_cmu_get_min_clock - callback to get minimal supported clock value. */
+static unsigned int sdhci_cmu_get_min_clock(struct sdhci_host *host)
+{
+ struct sdhci_s3c *ourhost = to_s3c(host);
+ unsigned long rate, min = ULONG_MAX;
+ int src;
+
+ for (src = 0; src < MAX_BUS_CLK; src++) {
+ struct clk *clk;
+
+ clk = ourhost->clk_bus[src];
+ if (IS_ERR(clk))
+ continue;
+
+ rate = clk_round_rate(clk, 0);
+ if (rate < min)
+ min = rate;
+ }
+
+ return min;
+}
+
+/* sdhci_cmu_set_clock - callback on clock change.*/
+static void sdhci_cmu_set_clock(struct sdhci_host *host, unsigned int clock)
+{
+ struct sdhci_s3c *ourhost = to_s3c(host);
+ struct device *dev = &ourhost->pdev->dev;
+ unsigned long timeout;
+ u16 clk = 0;
+ int ret;
+
+ host->mmc->actual_clock = 0;
+
+ /* If the clock is going off, set to 0 at clock control register */
+ if (clock == 0) {
+ sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
+ return;
+ }
+
+ sdhci_s3c_set_clock(host, clock);
+
+ /* Reset SD Clock Enable */
+ clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+ clk &= ~SDHCI_CLOCK_CARD_EN;
+ sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+
+ ret = clk_set_rate(ourhost->clk_bus[ourhost->cur_clk], clock);
+ if (ret != 0) {
+ dev_err(dev, "%s: failed to set clock rate %uHz\n",
+ mmc_hostname(host->mmc), clock);
+ return;
+ }
+
+ clk = SDHCI_CLOCK_INT_EN;
+ sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+
+ /* Wait max 20 ms */
+ timeout = 20;
+ while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
+ & SDHCI_CLOCK_INT_STABLE)) {
+ if (timeout == 0) {
+ dev_err(dev, "%s: Internal clock never stabilised.\n",
+ mmc_hostname(host->mmc));
+ return;
+ }
+ timeout--;
+ mdelay(1);
+ }
+
+ clk |= SDHCI_CLOCK_CARD_EN;
+ sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+}
+
+static struct sdhci_ops sdhci_s3c_ops = {
+ .get_max_clock = sdhci_s3c_get_max_clk,
+ .set_clock = sdhci_s3c_set_clock,
+ .get_min_clock = sdhci_s3c_get_min_clock,
+ .set_bus_width = sdhci_set_bus_width,
+ .reset = sdhci_reset,
+ .set_uhs_signaling = sdhci_set_uhs_signaling,
+};
+
+#ifdef CONFIG_OF
+static int sdhci_s3c_parse_dt(struct device *dev,
+ struct sdhci_host *host, struct s3c_sdhci_platdata *pdata)
+{
+ struct device_node *node = dev->of_node;
+ u32 max_width;
+
+ /* if the bus-width property is not specified, assume width as 1 */
+ if (of_property_read_u32(node, "bus-width", &max_width))
+ max_width = 1;
+ pdata->max_width = max_width;
+
+ /* get the card detection method */
+ if (of_get_property(node, "broken-cd", NULL)) {
+ pdata->cd_type = S3C_SDHCI_CD_NONE;
+ return 0;
+ }
+
+ if (of_get_property(node, "non-removable", NULL)) {
+ pdata->cd_type = S3C_SDHCI_CD_PERMANENT;
+ return 0;
+ }
+
+ if (of_get_named_gpio(node, "cd-gpios", 0))
+ return 0;
+
+ /* assuming internal card detect that will be configured by pinctrl */
+ pdata->cd_type = S3C_SDHCI_CD_INTERNAL;
+ return 0;
+}
+#else
+static int sdhci_s3c_parse_dt(struct device *dev,
+ struct sdhci_host *host, struct s3c_sdhci_platdata *pdata)
+{
+ return -EINVAL;
+}
+#endif
+
+static inline const struct sdhci_s3c_drv_data *sdhci_s3c_get_driver_data(
+ struct platform_device *pdev)
+{
+#ifdef CONFIG_OF
+ if (pdev->dev.of_node)
+ return of_device_get_match_data(&pdev->dev);
+#endif
+ return (const struct sdhci_s3c_drv_data *)
+ platform_get_device_id(pdev)->driver_data;
+}
+
+static int sdhci_s3c_probe(struct platform_device *pdev)
+{
+ struct s3c_sdhci_platdata *pdata;
+ const struct sdhci_s3c_drv_data *drv_data;
+ struct device *dev = &pdev->dev;
+ struct sdhci_host *host;
+ struct sdhci_s3c *sc;
+ int ret, irq, ptr, clks;
+
+ if (!pdev->dev.platform_data && !pdev->dev.of_node) {
+ dev_err(dev, "no device data specified\n");
+ return -ENOENT;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
+ host = sdhci_alloc_host(dev, sizeof(struct sdhci_s3c));
+ if (IS_ERR(host)) {
+ dev_err(dev, "sdhci_alloc_host() failed\n");
+ return PTR_ERR(host);
+ }
+ sc = sdhci_priv(host);
+
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata) {
+ ret = -ENOMEM;
+ goto err_pdata_io_clk;
+ }
+
+ if (pdev->dev.of_node) {
+ ret = sdhci_s3c_parse_dt(&pdev->dev, host, pdata);
+ if (ret)
+ goto err_pdata_io_clk;
+ } else {
+ memcpy(pdata, pdev->dev.platform_data, sizeof(*pdata));
+ }
+
+ drv_data = sdhci_s3c_get_driver_data(pdev);
+
+ sc->host = host;
+ sc->pdev = pdev;
+ sc->pdata = pdata;
+ sc->cur_clk = -1;
+
+ platform_set_drvdata(pdev, host);
+
+ sc->clk_io = devm_clk_get(dev, "hsmmc");
+ if (IS_ERR(sc->clk_io)) {
+ dev_err(dev, "failed to get io clock\n");
+ ret = PTR_ERR(sc->clk_io);
+ goto err_pdata_io_clk;
+ }
+
+ /* enable the local io clock and keep it running for the moment. */
+ clk_prepare_enable(sc->clk_io);
+
+ for (clks = 0, ptr = 0; ptr < MAX_BUS_CLK; ptr++) {
+ char name[14];
+
+ snprintf(name, 14, "mmc_busclk.%d", ptr);
+ sc->clk_bus[ptr] = devm_clk_get(dev, name);
+ if (IS_ERR(sc->clk_bus[ptr]))
+ continue;
+
+ clks++;
+ sc->clk_rates[ptr] = clk_get_rate(sc->clk_bus[ptr]);
+
+ dev_info(dev, "clock source %d: %s (%ld Hz)\n",
+ ptr, name, sc->clk_rates[ptr]);
+ }
+
+ if (clks == 0) {
+ dev_err(dev, "failed to find any bus clocks\n");
+ ret = -ENOENT;
+ goto err_no_busclks;
+ }
+
+ host->ioaddr = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(host->ioaddr)) {
+ ret = PTR_ERR(host->ioaddr);
+ goto err_req_regs;
+ }
+
+ /* Ensure we have minimal gpio selected CMD/CLK/Detect */
+ if (pdata->cfg_gpio)
+ pdata->cfg_gpio(pdev, pdata->max_width);
+
+ host->hw_name = "samsung-hsmmc";
+ host->ops = &sdhci_s3c_ops;
+ host->quirks = 0;
+ host->quirks2 = 0;
+ host->irq = irq;
+
+ /* Setup quirks for the controller */
+ host->quirks |= SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC;
+ host->quirks |= SDHCI_QUIRK_NO_HISPD_BIT;
+ if (drv_data) {
+ host->quirks |= drv_data->sdhci_quirks;
+ sc->no_divider = drv_data->no_divider;
+ }
+
+#ifndef CONFIG_MMC_SDHCI_S3C_DMA
+
+ /* we currently see overruns on errors, so disable the SDMA
+ * support as well. */
+ host->quirks |= SDHCI_QUIRK_BROKEN_DMA;
+
+#endif /* CONFIG_MMC_SDHCI_S3C_DMA */
+
+ /* It seems we do not get an DATA transfer complete on non-busy
+ * transfers, not sure if this is a problem with this specific
+ * SDHCI block, or a missing configuration that needs to be set. */
+ host->quirks |= SDHCI_QUIRK_NO_BUSY_IRQ;
+
+ /* This host supports the Auto CMD12 */
+ host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12;
+
+ /* Samsung SoCs need BROKEN_ADMA_ZEROLEN_DESC */
+ host->quirks |= SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC;
+
+ if (pdata->cd_type == S3C_SDHCI_CD_NONE ||
+ pdata->cd_type == S3C_SDHCI_CD_PERMANENT)
+ host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
+
+ if (pdata->cd_type == S3C_SDHCI_CD_PERMANENT)
+ host->mmc->caps = MMC_CAP_NONREMOVABLE;
+
+ switch (pdata->max_width) {
+ case 8:
+ host->mmc->caps |= MMC_CAP_8_BIT_DATA;
+ fallthrough;
+ case 4:
+ host->mmc->caps |= MMC_CAP_4_BIT_DATA;
+ break;
+ }
+
+ if (pdata->pm_caps)
+ host->mmc->pm_caps |= pdata->pm_caps;
+
+ host->quirks |= (SDHCI_QUIRK_32BIT_DMA_ADDR |
+ SDHCI_QUIRK_32BIT_DMA_SIZE);
+
+ /* HSMMC on Samsung SoCs uses SDCLK as timeout clock */
+ host->quirks |= SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK;
+
+ /*
+ * If controller does not have internal clock divider,
+ * we can use overriding functions instead of default.
+ */
+ if (sc->no_divider) {
+ sdhci_s3c_ops.set_clock = sdhci_cmu_set_clock;
+ sdhci_s3c_ops.get_min_clock = sdhci_cmu_get_min_clock;
+ sdhci_s3c_ops.get_max_clock = sdhci_cmu_get_max_clock;
+ }
+
+ /* It supports additional host capabilities if needed */
+ if (pdata->host_caps)
+ host->mmc->caps |= pdata->host_caps;
+
+ if (pdata->host_caps2)
+ host->mmc->caps2 |= pdata->host_caps2;
+
+ pm_runtime_enable(&pdev->dev);
+ pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
+ pm_runtime_use_autosuspend(&pdev->dev);
+ pm_suspend_ignore_children(&pdev->dev, 1);
+
+ ret = mmc_of_parse(host->mmc);
+ if (ret)
+ goto err_req_regs;
+
+ ret = sdhci_add_host(host);
+ if (ret)
+ goto err_req_regs;
+
+#ifdef CONFIG_PM
+ if (pdata->cd_type != S3C_SDHCI_CD_INTERNAL)
+ clk_disable_unprepare(sc->clk_io);
+#endif
+ return 0;
+
+ err_req_regs:
+ pm_runtime_disable(&pdev->dev);
+
+ err_no_busclks:
+ clk_disable_unprepare(sc->clk_io);
+
+ err_pdata_io_clk:
+ sdhci_free_host(host);
+
+ return ret;
+}
+
+static int sdhci_s3c_remove(struct platform_device *pdev)
+{
+ struct sdhci_host *host = platform_get_drvdata(pdev);
+ struct sdhci_s3c *sc = sdhci_priv(host);
+
+ if (sc->ext_cd_irq)
+ free_irq(sc->ext_cd_irq, sc);
+
+#ifdef CONFIG_PM
+ if (sc->pdata->cd_type != S3C_SDHCI_CD_INTERNAL)
+ clk_prepare_enable(sc->clk_io);
+#endif
+ sdhci_remove_host(host, 1);
+
+ pm_runtime_dont_use_autosuspend(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+
+ clk_disable_unprepare(sc->clk_io);
+
+ sdhci_free_host(host);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int sdhci_s3c_suspend(struct device *dev)
+{
+ struct sdhci_host *host = dev_get_drvdata(dev);
+
+ if (host->tuning_mode != SDHCI_TUNING_MODE_3)
+ mmc_retune_needed(host->mmc);
+
+ return sdhci_suspend_host(host);
+}
+
+static int sdhci_s3c_resume(struct device *dev)
+{
+ struct sdhci_host *host = dev_get_drvdata(dev);
+
+ return sdhci_resume_host(host);
+}
+#endif
+
+#ifdef CONFIG_PM
+static int sdhci_s3c_runtime_suspend(struct device *dev)
+{
+ struct sdhci_host *host = dev_get_drvdata(dev);
+ struct sdhci_s3c *ourhost = to_s3c(host);
+ struct clk *busclk = ourhost->clk_io;
+ int ret;
+
+ ret = sdhci_runtime_suspend_host(host);
+
+ if (host->tuning_mode != SDHCI_TUNING_MODE_3)
+ mmc_retune_needed(host->mmc);
+
+ if (ourhost->cur_clk >= 0)
+ clk_disable_unprepare(ourhost->clk_bus[ourhost->cur_clk]);
+ clk_disable_unprepare(busclk);
+ return ret;
+}
+
+static int sdhci_s3c_runtime_resume(struct device *dev)
+{
+ struct sdhci_host *host = dev_get_drvdata(dev);
+ struct sdhci_s3c *ourhost = to_s3c(host);
+ struct clk *busclk = ourhost->clk_io;
+ int ret;
+
+ clk_prepare_enable(busclk);
+ if (ourhost->cur_clk >= 0)
+ clk_prepare_enable(ourhost->clk_bus[ourhost->cur_clk]);
+ ret = sdhci_runtime_resume_host(host, 0);
+ return ret;
+}
+#endif
+
+static const struct dev_pm_ops sdhci_s3c_pmops = {
+ SET_SYSTEM_SLEEP_PM_OPS(sdhci_s3c_suspend, sdhci_s3c_resume)
+ SET_RUNTIME_PM_OPS(sdhci_s3c_runtime_suspend, sdhci_s3c_runtime_resume,
+ NULL)
+};
+
+static const struct platform_device_id sdhci_s3c_driver_ids[] = {
+ {
+ .name = "s3c-sdhci",
+ .driver_data = (kernel_ulong_t)NULL,
+ },
+ { }
+};
+MODULE_DEVICE_TABLE(platform, sdhci_s3c_driver_ids);
+
+#ifdef CONFIG_OF
+static const struct sdhci_s3c_drv_data exynos4_sdhci_drv_data = {
+ .no_divider = true,
+};
+
+static const struct of_device_id sdhci_s3c_dt_match[] = {
+ { .compatible = "samsung,s3c6410-sdhci", },
+ { .compatible = "samsung,exynos4210-sdhci",
+ .data = &exynos4_sdhci_drv_data },
+ {},
+};
+MODULE_DEVICE_TABLE(of, sdhci_s3c_dt_match);
+#endif
+
+static struct platform_driver sdhci_s3c_driver = {
+ .probe = sdhci_s3c_probe,
+ .remove = sdhci_s3c_remove,
+ .id_table = sdhci_s3c_driver_ids,
+ .driver = {
+ .name = "s3c-sdhci",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
+ .of_match_table = of_match_ptr(sdhci_s3c_dt_match),
+ .pm = &sdhci_s3c_pmops,
+ },
+};
+
+module_platform_driver(sdhci_s3c_driver);
+
+MODULE_DESCRIPTION("Samsung SDHCI (HSMMC) glue");
+MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
+MODULE_LICENSE("GPL v2");