diff options
Diffstat (limited to 'drivers/net/mdio/mdio-i2c.c')
| -rw-r--r-- | drivers/net/mdio/mdio-i2c.c | 417 |
1 files changed, 417 insertions, 0 deletions
diff --git a/drivers/net/mdio/mdio-i2c.c b/drivers/net/mdio/mdio-i2c.c new file mode 100644 index 000000000..bf8bf5e20 --- /dev/null +++ b/drivers/net/mdio/mdio-i2c.c @@ -0,0 +1,417 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * MDIO I2C bridge + * + * Copyright (C) 2015-2016 Russell King + * Copyright (C) 2021 Marek Behun + * + * Network PHYs can appear on I2C buses when they are part of SFP module. + * This driver exposes these PHYs to the networking PHY code, allowing + * our PHY drivers access to these PHYs, and so allowing configuration + * of their settings. + */ +#include <linux/i2c.h> +#include <linux/mdio/mdio-i2c.h> +#include <linux/phy.h> +#include <linux/sfp.h> + +/* + * I2C bus addresses 0x50 and 0x51 are normally an EEPROM, which is + * specified to be present in SFP modules. These correspond with PHY + * addresses 16 and 17. Disallow access to these "phy" addresses. + */ +static bool i2c_mii_valid_phy_id(int phy_id) +{ + return phy_id != 0x10 && phy_id != 0x11; +} + +static unsigned int i2c_mii_phy_addr(int phy_id) +{ + return phy_id + 0x40; +} + +static int i2c_mii_read_default(struct mii_bus *bus, int phy_id, int reg) +{ + struct i2c_adapter *i2c = bus->priv; + struct i2c_msg msgs[2]; + u8 addr[3], data[2], *p; + int bus_addr, ret; + + if (!i2c_mii_valid_phy_id(phy_id)) + return 0xffff; + + p = addr; + if (reg & MII_ADDR_C45) { + *p++ = 0x20 | ((reg >> 16) & 31); + *p++ = reg >> 8; + } + *p++ = reg; + + bus_addr = i2c_mii_phy_addr(phy_id); + msgs[0].addr = bus_addr; + msgs[0].flags = 0; + msgs[0].len = p - addr; + msgs[0].buf = addr; + msgs[1].addr = bus_addr; + msgs[1].flags = I2C_M_RD; + msgs[1].len = sizeof(data); + msgs[1].buf = data; + + ret = i2c_transfer(i2c, msgs, ARRAY_SIZE(msgs)); + if (ret != ARRAY_SIZE(msgs)) + return 0xffff; + + return data[0] << 8 | data[1]; +} + +static int i2c_mii_write_default(struct mii_bus *bus, int phy_id, int reg, + u16 val) +{ + struct i2c_adapter *i2c = bus->priv; + struct i2c_msg msg; + int ret; + u8 data[5], *p; + + if (!i2c_mii_valid_phy_id(phy_id)) + return 0; + + p = data; + if (reg & MII_ADDR_C45) { + *p++ = (reg >> 16) & 31; + *p++ = reg >> 8; + } + *p++ = reg; + *p++ = val >> 8; + *p++ = val; + + msg.addr = i2c_mii_phy_addr(phy_id); + msg.flags = 0; + msg.len = p - data; + msg.buf = data; + + ret = i2c_transfer(i2c, &msg, 1); + + return ret < 0 ? ret : 0; +} + +/* RollBall SFPs do not access internal PHY via I2C address 0x56, but + * instead via address 0x51, when SFP page is set to 0x03 and password to + * 0xffffffff. + * + * address size contents description + * ------- ---- -------- ----------- + * 0x80 1 CMD 0x01/0x02/0x04 for write/read/done + * 0x81 1 DEV Clause 45 device + * 0x82 2 REG Clause 45 register + * 0x84 2 VAL Register value + */ +#define ROLLBALL_PHY_I2C_ADDR 0x51 + +#define ROLLBALL_PASSWORD (SFP_VSL + 3) + +#define ROLLBALL_CMD_ADDR 0x80 +#define ROLLBALL_DATA_ADDR 0x81 + +#define ROLLBALL_CMD_WRITE 0x01 +#define ROLLBALL_CMD_READ 0x02 +#define ROLLBALL_CMD_DONE 0x04 + +#define SFP_PAGE_ROLLBALL_MDIO 3 + +static int __i2c_transfer_err(struct i2c_adapter *i2c, struct i2c_msg *msgs, + int num) +{ + int ret; + + ret = __i2c_transfer(i2c, msgs, num); + if (ret < 0) + return ret; + else if (ret != num) + return -EIO; + else + return 0; +} + +static int __i2c_rollball_get_page(struct i2c_adapter *i2c, int bus_addr, + u8 *page) +{ + struct i2c_msg msgs[2]; + u8 addr = SFP_PAGE; + + msgs[0].addr = bus_addr; + msgs[0].flags = 0; + msgs[0].len = 1; + msgs[0].buf = &addr; + + msgs[1].addr = bus_addr; + msgs[1].flags = I2C_M_RD; + msgs[1].len = 1; + msgs[1].buf = page; + + return __i2c_transfer_err(i2c, msgs, 2); +} + +static int __i2c_rollball_set_page(struct i2c_adapter *i2c, int bus_addr, + u8 page) +{ + struct i2c_msg msg; + u8 buf[2]; + + buf[0] = SFP_PAGE; + buf[1] = page; + + msg.addr = bus_addr; + msg.flags = 0; + msg.len = 2; + msg.buf = buf; + + return __i2c_transfer_err(i2c, &msg, 1); +} + +/* In order to not interfere with other SFP code (which possibly may manipulate + * SFP_PAGE), for every transfer we do this: + * 1. lock the bus + * 2. save content of SFP_PAGE + * 3. set SFP_PAGE to 3 + * 4. do the transfer + * 5. restore original SFP_PAGE + * 6. unlock the bus + * Note that one might think that steps 2 to 5 could be theoretically done all + * in one call to i2c_transfer (by constructing msgs array in such a way), but + * unfortunately tests show that this does not work :-( Changed SFP_PAGE does + * not take into account until i2c_transfer() is done. + */ +static int i2c_transfer_rollball(struct i2c_adapter *i2c, + struct i2c_msg *msgs, int num) +{ + int ret, main_err = 0; + u8 saved_page; + + i2c_lock_bus(i2c, I2C_LOCK_SEGMENT); + + /* save original page */ + ret = __i2c_rollball_get_page(i2c, msgs->addr, &saved_page); + if (ret) + goto unlock; + + /* change to RollBall MDIO page */ + ret = __i2c_rollball_set_page(i2c, msgs->addr, SFP_PAGE_ROLLBALL_MDIO); + if (ret) + goto unlock; + + /* do the transfer; we try to restore original page if this fails */ + ret = __i2c_transfer_err(i2c, msgs, num); + if (ret) + main_err = ret; + + /* restore original page */ + ret = __i2c_rollball_set_page(i2c, msgs->addr, saved_page); + +unlock: + i2c_unlock_bus(i2c, I2C_LOCK_SEGMENT); + + return main_err ? : ret; +} + +static int i2c_rollball_mii_poll(struct mii_bus *bus, int bus_addr, u8 *buf, + size_t len) +{ + struct i2c_adapter *i2c = bus->priv; + struct i2c_msg msgs[2]; + u8 cmd_addr, tmp, *res; + int i, ret; + + cmd_addr = ROLLBALL_CMD_ADDR; + + res = buf ? buf : &tmp; + len = buf ? len : 1; + + msgs[0].addr = bus_addr; + msgs[0].flags = 0; + msgs[0].len = 1; + msgs[0].buf = &cmd_addr; + + msgs[1].addr = bus_addr; + msgs[1].flags = I2C_M_RD; + msgs[1].len = len; + msgs[1].buf = res; + + /* By experiment it takes up to 70 ms to access a register for these + * SFPs. Sleep 20ms between iterations and try 10 times. + */ + i = 10; + do { + msleep(20); + + ret = i2c_transfer_rollball(i2c, msgs, ARRAY_SIZE(msgs)); + if (ret) + return ret; + + if (*res == ROLLBALL_CMD_DONE) + return 0; + } while (i-- > 0); + + dev_dbg(&bus->dev, "poll timed out\n"); + + return -ETIMEDOUT; +} + +static int i2c_rollball_mii_cmd(struct mii_bus *bus, int bus_addr, u8 cmd, + u8 *data, size_t len) +{ + struct i2c_adapter *i2c = bus->priv; + struct i2c_msg msgs[2]; + u8 cmdbuf[2]; + + cmdbuf[0] = ROLLBALL_CMD_ADDR; + cmdbuf[1] = cmd; + + msgs[0].addr = bus_addr; + msgs[0].flags = 0; + msgs[0].len = len; + msgs[0].buf = data; + + msgs[1].addr = bus_addr; + msgs[1].flags = 0; + msgs[1].len = sizeof(cmdbuf); + msgs[1].buf = cmdbuf; + + return i2c_transfer_rollball(i2c, msgs, ARRAY_SIZE(msgs)); +} + +static int i2c_mii_read_rollball(struct mii_bus *bus, int phy_id, int reg) +{ + u8 buf[4], res[6]; + int bus_addr, ret; + u16 val; + + if (!(reg & MII_ADDR_C45)) + return -EOPNOTSUPP; + + bus_addr = i2c_mii_phy_addr(phy_id); + if (bus_addr != ROLLBALL_PHY_I2C_ADDR) + return 0xffff; + + buf[0] = ROLLBALL_DATA_ADDR; + buf[1] = (reg >> 16) & 0x1f; + buf[2] = (reg >> 8) & 0xff; + buf[3] = reg & 0xff; + + ret = i2c_rollball_mii_cmd(bus, bus_addr, ROLLBALL_CMD_READ, buf, + sizeof(buf)); + if (ret < 0) + return ret; + + ret = i2c_rollball_mii_poll(bus, bus_addr, res, sizeof(res)); + if (ret == -ETIMEDOUT) + return 0xffff; + else if (ret < 0) + return ret; + + val = res[4] << 8 | res[5]; + + return val; +} + +static int i2c_mii_write_rollball(struct mii_bus *bus, int phy_id, int reg, + u16 val) +{ + int bus_addr, ret; + u8 buf[6]; + + if (!(reg & MII_ADDR_C45)) + return -EOPNOTSUPP; + + bus_addr = i2c_mii_phy_addr(phy_id); + if (bus_addr != ROLLBALL_PHY_I2C_ADDR) + return 0; + + buf[0] = ROLLBALL_DATA_ADDR; + buf[1] = (reg >> 16) & 0x1f; + buf[2] = (reg >> 8) & 0xff; + buf[3] = reg & 0xff; + buf[4] = val >> 8; + buf[5] = val & 0xff; + + ret = i2c_rollball_mii_cmd(bus, bus_addr, ROLLBALL_CMD_WRITE, buf, + sizeof(buf)); + if (ret < 0) + return ret; + + ret = i2c_rollball_mii_poll(bus, bus_addr, NULL, 0); + if (ret < 0) + return ret; + + return 0; +} + +static int i2c_mii_init_rollball(struct i2c_adapter *i2c) +{ + struct i2c_msg msg; + u8 pw[5]; + int ret; + + pw[0] = ROLLBALL_PASSWORD; + pw[1] = 0xff; + pw[2] = 0xff; + pw[3] = 0xff; + pw[4] = 0xff; + + msg.addr = ROLLBALL_PHY_I2C_ADDR; + msg.flags = 0; + msg.len = sizeof(pw); + msg.buf = pw; + + ret = i2c_transfer(i2c, &msg, 1); + if (ret < 0) + return ret; + else if (ret != 1) + return -EIO; + else + return 0; +} + +struct mii_bus *mdio_i2c_alloc(struct device *parent, struct i2c_adapter *i2c, + enum mdio_i2c_proto protocol) +{ + struct mii_bus *mii; + int ret; + + if (!i2c_check_functionality(i2c, I2C_FUNC_I2C)) + return ERR_PTR(-EINVAL); + + mii = mdiobus_alloc(); + if (!mii) + return ERR_PTR(-ENOMEM); + + snprintf(mii->id, MII_BUS_ID_SIZE, "i2c:%s", dev_name(parent)); + mii->parent = parent; + mii->priv = i2c; + + switch (protocol) { + case MDIO_I2C_ROLLBALL: + ret = i2c_mii_init_rollball(i2c); + if (ret < 0) { + dev_err(parent, + "Cannot initialize RollBall MDIO I2C protocol: %d\n", + ret); + mdiobus_free(mii); + return ERR_PTR(ret); + } + + mii->read = i2c_mii_read_rollball; + mii->write = i2c_mii_write_rollball; + break; + default: + mii->read = i2c_mii_read_default; + mii->write = i2c_mii_write_default; + break; + } + + return mii; +} +EXPORT_SYMBOL_GPL(mdio_i2c_alloc); + +MODULE_AUTHOR("Russell King"); +MODULE_DESCRIPTION("MDIO I2C bridge library"); +MODULE_LICENSE("GPL v2"); |