diff options
Diffstat (limited to 'drivers/net/phy/dp83822.c')
| -rw-r--r-- | drivers/net/phy/dp83822.c | 651 |
1 files changed, 651 insertions, 0 deletions
diff --git a/drivers/net/phy/dp83822.c b/drivers/net/phy/dp83822.c new file mode 100644 index 000000000..267e6fd3d --- /dev/null +++ b/drivers/net/phy/dp83822.c @@ -0,0 +1,651 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Driver for the Texas Instruments DP83822, DP83825 and DP83826 PHYs. + * + * Copyright (C) 2017 Texas Instruments Inc. + */ + +#include <linux/ethtool.h> +#include <linux/etherdevice.h> +#include <linux/kernel.h> +#include <linux/mii.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/phy.h> +#include <linux/netdevice.h> + +#define DP83822_PHY_ID 0x2000a240 +#define DP83825S_PHY_ID 0x2000a140 +#define DP83825I_PHY_ID 0x2000a150 +#define DP83825CM_PHY_ID 0x2000a160 +#define DP83825CS_PHY_ID 0x2000a170 +#define DP83826C_PHY_ID 0x2000a130 +#define DP83826NC_PHY_ID 0x2000a110 + +#define DP83822_DEVADDR 0x1f + +#define MII_DP83822_CTRL_2 0x0a +#define MII_DP83822_PHYSTS 0x10 +#define MII_DP83822_PHYSCR 0x11 +#define MII_DP83822_MISR1 0x12 +#define MII_DP83822_MISR2 0x13 +#define MII_DP83822_FCSCR 0x14 +#define MII_DP83822_RCSR 0x17 +#define MII_DP83822_RESET_CTRL 0x1f +#define MII_DP83822_GENCFG 0x465 +#define MII_DP83822_SOR1 0x467 + +/* GENCFG */ +#define DP83822_SIG_DET_LOW BIT(0) + +/* Control Register 2 bits */ +#define DP83822_FX_ENABLE BIT(14) + +#define DP83822_HW_RESET BIT(15) +#define DP83822_SW_RESET BIT(14) + +/* PHY STS bits */ +#define DP83822_PHYSTS_DUPLEX BIT(2) +#define DP83822_PHYSTS_10 BIT(1) +#define DP83822_PHYSTS_LINK BIT(0) + +/* PHYSCR Register Fields */ +#define DP83822_PHYSCR_INT_OE BIT(0) /* Interrupt Output Enable */ +#define DP83822_PHYSCR_INTEN BIT(1) /* Interrupt Enable */ + +/* MISR1 bits */ +#define DP83822_RX_ERR_HF_INT_EN BIT(0) +#define DP83822_FALSE_CARRIER_HF_INT_EN BIT(1) +#define DP83822_ANEG_COMPLETE_INT_EN BIT(2) +#define DP83822_DUP_MODE_CHANGE_INT_EN BIT(3) +#define DP83822_SPEED_CHANGED_INT_EN BIT(4) +#define DP83822_LINK_STAT_INT_EN BIT(5) +#define DP83822_ENERGY_DET_INT_EN BIT(6) +#define DP83822_LINK_QUAL_INT_EN BIT(7) + +/* MISR2 bits */ +#define DP83822_JABBER_DET_INT_EN BIT(0) +#define DP83822_WOL_PKT_INT_EN BIT(1) +#define DP83822_SLEEP_MODE_INT_EN BIT(2) +#define DP83822_MDI_XOVER_INT_EN BIT(3) +#define DP83822_LB_FIFO_INT_EN BIT(4) +#define DP83822_PAGE_RX_INT_EN BIT(5) +#define DP83822_ANEG_ERR_INT_EN BIT(6) +#define DP83822_EEE_ERROR_CHANGE_INT_EN BIT(7) + +/* INT_STAT1 bits */ +#define DP83822_WOL_INT_EN BIT(4) +#define DP83822_WOL_INT_STAT BIT(12) + +#define MII_DP83822_RXSOP1 0x04a5 +#define MII_DP83822_RXSOP2 0x04a6 +#define MII_DP83822_RXSOP3 0x04a7 + +/* WoL Registers */ +#define MII_DP83822_WOL_CFG 0x04a0 +#define MII_DP83822_WOL_STAT 0x04a1 +#define MII_DP83822_WOL_DA1 0x04a2 +#define MII_DP83822_WOL_DA2 0x04a3 +#define MII_DP83822_WOL_DA3 0x04a4 + +/* WoL bits */ +#define DP83822_WOL_MAGIC_EN BIT(0) +#define DP83822_WOL_SECURE_ON BIT(5) +#define DP83822_WOL_EN BIT(7) +#define DP83822_WOL_INDICATION_SEL BIT(8) +#define DP83822_WOL_CLR_INDICATION BIT(11) + +/* RCSR bits */ +#define DP83822_RGMII_MODE_EN BIT(9) +#define DP83822_RX_CLK_SHIFT BIT(12) +#define DP83822_TX_CLK_SHIFT BIT(11) + +/* SOR1 mode */ +#define DP83822_STRAP_MODE1 0 +#define DP83822_STRAP_MODE2 BIT(0) +#define DP83822_STRAP_MODE3 BIT(1) +#define DP83822_STRAP_MODE4 GENMASK(1, 0) + +#define DP83822_COL_STRAP_MASK GENMASK(11, 10) +#define DP83822_COL_SHIFT 10 +#define DP83822_RX_ER_STR_MASK GENMASK(9, 8) +#define DP83822_RX_ER_SHIFT 8 + +#define MII_DP83822_FIBER_ADVERTISE (ADVERTISED_TP | ADVERTISED_MII | \ + ADVERTISED_FIBRE | \ + ADVERTISED_Pause | ADVERTISED_Asym_Pause) + +struct dp83822_private { + bool fx_signal_det_low; + int fx_enabled; + u16 fx_sd_enable; +}; + +static int dp83822_set_wol(struct phy_device *phydev, + struct ethtool_wolinfo *wol) +{ + struct net_device *ndev = phydev->attached_dev; + u16 value; + const u8 *mac; + + if (wol->wolopts & (WAKE_MAGIC | WAKE_MAGICSECURE)) { + mac = (const u8 *)ndev->dev_addr; + + if (!is_valid_ether_addr(mac)) + return -EINVAL; + + /* MAC addresses start with byte 5, but stored in mac[0]. + * 822 PHYs store bytes 4|5, 2|3, 0|1 + */ + phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_DA1, + (mac[1] << 8) | mac[0]); + phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_DA2, + (mac[3] << 8) | mac[2]); + phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_DA3, + (mac[5] << 8) | mac[4]); + + value = phy_read_mmd(phydev, DP83822_DEVADDR, + MII_DP83822_WOL_CFG); + if (wol->wolopts & WAKE_MAGIC) + value |= DP83822_WOL_MAGIC_EN; + else + value &= ~DP83822_WOL_MAGIC_EN; + + if (wol->wolopts & WAKE_MAGICSECURE) { + phy_write_mmd(phydev, DP83822_DEVADDR, + MII_DP83822_RXSOP1, + (wol->sopass[1] << 8) | wol->sopass[0]); + phy_write_mmd(phydev, DP83822_DEVADDR, + MII_DP83822_RXSOP2, + (wol->sopass[3] << 8) | wol->sopass[2]); + phy_write_mmd(phydev, DP83822_DEVADDR, + MII_DP83822_RXSOP3, + (wol->sopass[5] << 8) | wol->sopass[4]); + value |= DP83822_WOL_SECURE_ON; + } else { + value &= ~DP83822_WOL_SECURE_ON; + } + + /* Clear any pending WoL interrupt */ + phy_read(phydev, MII_DP83822_MISR2); + + value |= DP83822_WOL_EN | DP83822_WOL_INDICATION_SEL | + DP83822_WOL_CLR_INDICATION; + + return phy_write_mmd(phydev, DP83822_DEVADDR, + MII_DP83822_WOL_CFG, value); + } else { + return phy_clear_bits_mmd(phydev, DP83822_DEVADDR, + MII_DP83822_WOL_CFG, DP83822_WOL_EN); + } +} + +static void dp83822_get_wol(struct phy_device *phydev, + struct ethtool_wolinfo *wol) +{ + int value; + u16 sopass_val; + + wol->supported = (WAKE_MAGIC | WAKE_MAGICSECURE); + wol->wolopts = 0; + + value = phy_read_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG); + + if (value & DP83822_WOL_MAGIC_EN) + wol->wolopts |= WAKE_MAGIC; + + if (value & DP83822_WOL_SECURE_ON) { + sopass_val = phy_read_mmd(phydev, DP83822_DEVADDR, + MII_DP83822_RXSOP1); + wol->sopass[0] = (sopass_val & 0xff); + wol->sopass[1] = (sopass_val >> 8); + + sopass_val = phy_read_mmd(phydev, DP83822_DEVADDR, + MII_DP83822_RXSOP2); + wol->sopass[2] = (sopass_val & 0xff); + wol->sopass[3] = (sopass_val >> 8); + + sopass_val = phy_read_mmd(phydev, DP83822_DEVADDR, + MII_DP83822_RXSOP3); + wol->sopass[4] = (sopass_val & 0xff); + wol->sopass[5] = (sopass_val >> 8); + + wol->wolopts |= WAKE_MAGICSECURE; + } + + /* WoL is not enabled so set wolopts to 0 */ + if (!(value & DP83822_WOL_EN)) + wol->wolopts = 0; +} + +static int dp83822_config_intr(struct phy_device *phydev) +{ + struct dp83822_private *dp83822 = phydev->priv; + int misr_status; + int physcr_status; + int err; + + if (phydev->interrupts == PHY_INTERRUPT_ENABLED) { + misr_status = phy_read(phydev, MII_DP83822_MISR1); + if (misr_status < 0) + return misr_status; + + misr_status |= (DP83822_LINK_STAT_INT_EN | + DP83822_ENERGY_DET_INT_EN | + DP83822_LINK_QUAL_INT_EN); + + /* Private data pointer is NULL on DP83825/26 */ + if (!dp83822 || !dp83822->fx_enabled) + misr_status |= DP83822_ANEG_COMPLETE_INT_EN | + DP83822_DUP_MODE_CHANGE_INT_EN | + DP83822_SPEED_CHANGED_INT_EN; + + + err = phy_write(phydev, MII_DP83822_MISR1, misr_status); + if (err < 0) + return err; + + misr_status = phy_read(phydev, MII_DP83822_MISR2); + if (misr_status < 0) + return misr_status; + + misr_status |= (DP83822_JABBER_DET_INT_EN | + DP83822_SLEEP_MODE_INT_EN | + DP83822_LB_FIFO_INT_EN | + DP83822_PAGE_RX_INT_EN | + DP83822_EEE_ERROR_CHANGE_INT_EN); + + /* Private data pointer is NULL on DP83825/26 */ + if (!dp83822 || !dp83822->fx_enabled) + misr_status |= DP83822_ANEG_ERR_INT_EN | + DP83822_WOL_PKT_INT_EN; + + err = phy_write(phydev, MII_DP83822_MISR2, misr_status); + if (err < 0) + return err; + + physcr_status = phy_read(phydev, MII_DP83822_PHYSCR); + if (physcr_status < 0) + return physcr_status; + + physcr_status |= DP83822_PHYSCR_INT_OE | DP83822_PHYSCR_INTEN; + + } else { + err = phy_write(phydev, MII_DP83822_MISR1, 0); + if (err < 0) + return err; + + err = phy_write(phydev, MII_DP83822_MISR2, 0); + if (err < 0) + return err; + + physcr_status = phy_read(phydev, MII_DP83822_PHYSCR); + if (physcr_status < 0) + return physcr_status; + + physcr_status &= ~DP83822_PHYSCR_INTEN; + } + + return phy_write(phydev, MII_DP83822_PHYSCR, physcr_status); +} + +static irqreturn_t dp83822_handle_interrupt(struct phy_device *phydev) +{ + bool trigger_machine = false; + int irq_status; + + /* The MISR1 and MISR2 registers are holding the interrupt status in + * the upper half (15:8), while the lower half (7:0) is used for + * controlling the interrupt enable state of those individual interrupt + * sources. To determine the possible interrupt sources, just read the + * MISR* register and use it directly to know which interrupts have + * been enabled previously or not. + */ + irq_status = phy_read(phydev, MII_DP83822_MISR1); + if (irq_status < 0) { + phy_error(phydev); + return IRQ_NONE; + } + if (irq_status & ((irq_status & GENMASK(7, 0)) << 8)) + trigger_machine = true; + + irq_status = phy_read(phydev, MII_DP83822_MISR2); + if (irq_status < 0) { + phy_error(phydev); + return IRQ_NONE; + } + if (irq_status & ((irq_status & GENMASK(7, 0)) << 8)) + trigger_machine = true; + + if (!trigger_machine) + return IRQ_NONE; + + phy_trigger_machine(phydev); + + return IRQ_HANDLED; +} + +static int dp8382x_disable_wol(struct phy_device *phydev) +{ + return phy_clear_bits_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG, + DP83822_WOL_EN | DP83822_WOL_MAGIC_EN | + DP83822_WOL_SECURE_ON); +} + +static int dp83822_read_status(struct phy_device *phydev) +{ + struct dp83822_private *dp83822 = phydev->priv; + int status = phy_read(phydev, MII_DP83822_PHYSTS); + int ctrl2; + int ret; + + if (dp83822->fx_enabled) { + if (status & DP83822_PHYSTS_LINK) { + phydev->speed = SPEED_UNKNOWN; + phydev->duplex = DUPLEX_UNKNOWN; + } else { + ctrl2 = phy_read(phydev, MII_DP83822_CTRL_2); + if (ctrl2 < 0) + return ctrl2; + + if (!(ctrl2 & DP83822_FX_ENABLE)) { + ret = phy_write(phydev, MII_DP83822_CTRL_2, + DP83822_FX_ENABLE | ctrl2); + if (ret < 0) + return ret; + } + } + } + + ret = genphy_read_status(phydev); + if (ret) + return ret; + + if (status < 0) + return status; + + if (status & DP83822_PHYSTS_DUPLEX) + phydev->duplex = DUPLEX_FULL; + else + phydev->duplex = DUPLEX_HALF; + + if (status & DP83822_PHYSTS_10) + phydev->speed = SPEED_10; + else + phydev->speed = SPEED_100; + + return 0; +} + +static int dp83822_config_init(struct phy_device *phydev) +{ + struct dp83822_private *dp83822 = phydev->priv; + struct device *dev = &phydev->mdio.dev; + int rgmii_delay; + s32 rx_int_delay; + s32 tx_int_delay; + int err = 0; + int bmcr; + + if (phy_interface_is_rgmii(phydev)) { + rx_int_delay = phy_get_internal_delay(phydev, dev, NULL, 0, + true); + + if (rx_int_delay <= 0) + rgmii_delay = 0; + else + rgmii_delay = DP83822_RX_CLK_SHIFT; + + tx_int_delay = phy_get_internal_delay(phydev, dev, NULL, 0, + false); + if (tx_int_delay <= 0) + rgmii_delay &= ~DP83822_TX_CLK_SHIFT; + else + rgmii_delay |= DP83822_TX_CLK_SHIFT; + + if (rgmii_delay) { + err = phy_set_bits_mmd(phydev, DP83822_DEVADDR, + MII_DP83822_RCSR, rgmii_delay); + if (err) + return err; + } + + phy_set_bits_mmd(phydev, DP83822_DEVADDR, + MII_DP83822_RCSR, DP83822_RGMII_MODE_EN); + } else { + phy_clear_bits_mmd(phydev, DP83822_DEVADDR, + MII_DP83822_RCSR, DP83822_RGMII_MODE_EN); + } + + if (dp83822->fx_enabled) { + err = phy_modify(phydev, MII_DP83822_CTRL_2, + DP83822_FX_ENABLE, 1); + if (err < 0) + return err; + + /* Only allow advertising what this PHY supports */ + linkmode_and(phydev->advertising, phydev->advertising, + phydev->supported); + + linkmode_set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, + phydev->supported); + linkmode_set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, + phydev->advertising); + linkmode_set_bit(ETHTOOL_LINK_MODE_100baseFX_Full_BIT, + phydev->supported); + linkmode_set_bit(ETHTOOL_LINK_MODE_100baseFX_Half_BIT, + phydev->supported); + linkmode_set_bit(ETHTOOL_LINK_MODE_100baseFX_Full_BIT, + phydev->advertising); + linkmode_set_bit(ETHTOOL_LINK_MODE_100baseFX_Half_BIT, + phydev->advertising); + + /* Auto neg is not supported in fiber mode */ + bmcr = phy_read(phydev, MII_BMCR); + if (bmcr < 0) + return bmcr; + + if (bmcr & BMCR_ANENABLE) { + err = phy_modify(phydev, MII_BMCR, BMCR_ANENABLE, 0); + if (err < 0) + return err; + } + phydev->autoneg = AUTONEG_DISABLE; + linkmode_clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, + phydev->supported); + linkmode_clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, + phydev->advertising); + + /* Setup fiber advertisement */ + err = phy_modify_changed(phydev, MII_ADVERTISE, + MII_DP83822_FIBER_ADVERTISE, + MII_DP83822_FIBER_ADVERTISE); + + if (err < 0) + return err; + + if (dp83822->fx_signal_det_low) { + err = phy_set_bits_mmd(phydev, DP83822_DEVADDR, + MII_DP83822_GENCFG, + DP83822_SIG_DET_LOW); + if (err) + return err; + } + } + return dp8382x_disable_wol(phydev); +} + +static int dp8382x_config_init(struct phy_device *phydev) +{ + return dp8382x_disable_wol(phydev); +} + +static int dp83822_phy_reset(struct phy_device *phydev) +{ + int err; + + err = phy_write(phydev, MII_DP83822_RESET_CTRL, DP83822_SW_RESET); + if (err < 0) + return err; + + return phydev->drv->config_init(phydev); +} + +#ifdef CONFIG_OF_MDIO +static int dp83822_of_init(struct phy_device *phydev) +{ + struct dp83822_private *dp83822 = phydev->priv; + struct device *dev = &phydev->mdio.dev; + + /* Signal detection for the PHY is only enabled if the FX_EN and the + * SD_EN pins are strapped. Signal detection can only enabled if FX_EN + * is strapped otherwise signal detection is disabled for the PHY. + */ + if (dp83822->fx_enabled && dp83822->fx_sd_enable) + dp83822->fx_signal_det_low = device_property_present(dev, + "ti,link-loss-low"); + if (!dp83822->fx_enabled) + dp83822->fx_enabled = device_property_present(dev, + "ti,fiber-mode"); + + return 0; +} +#else +static int dp83822_of_init(struct phy_device *phydev) +{ + return 0; +} +#endif /* CONFIG_OF_MDIO */ + +static int dp83822_read_straps(struct phy_device *phydev) +{ + struct dp83822_private *dp83822 = phydev->priv; + int fx_enabled, fx_sd_enable; + int val; + + val = phy_read_mmd(phydev, DP83822_DEVADDR, MII_DP83822_SOR1); + if (val < 0) + return val; + + fx_enabled = (val & DP83822_COL_STRAP_MASK) >> DP83822_COL_SHIFT; + if (fx_enabled == DP83822_STRAP_MODE2 || + fx_enabled == DP83822_STRAP_MODE3) + dp83822->fx_enabled = 1; + + if (dp83822->fx_enabled) { + fx_sd_enable = (val & DP83822_RX_ER_STR_MASK) >> DP83822_RX_ER_SHIFT; + if (fx_sd_enable == DP83822_STRAP_MODE3 || + fx_sd_enable == DP83822_STRAP_MODE4) + dp83822->fx_sd_enable = 1; + } + + return 0; +} + +static int dp83822_probe(struct phy_device *phydev) +{ + struct dp83822_private *dp83822; + int ret; + + dp83822 = devm_kzalloc(&phydev->mdio.dev, sizeof(*dp83822), + GFP_KERNEL); + if (!dp83822) + return -ENOMEM; + + phydev->priv = dp83822; + + ret = dp83822_read_straps(phydev); + if (ret) + return ret; + + dp83822_of_init(phydev); + + if (dp83822->fx_enabled) + phydev->port = PORT_FIBRE; + + return 0; +} + +static int dp83822_suspend(struct phy_device *phydev) +{ + int value; + + value = phy_read_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG); + + if (!(value & DP83822_WOL_EN)) + genphy_suspend(phydev); + + return 0; +} + +static int dp83822_resume(struct phy_device *phydev) +{ + int value; + + genphy_resume(phydev); + + value = phy_read_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG); + + phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG, value | + DP83822_WOL_CLR_INDICATION); + + return 0; +} + +#define DP83822_PHY_DRIVER(_id, _name) \ + { \ + PHY_ID_MATCH_MODEL(_id), \ + .name = (_name), \ + /* PHY_BASIC_FEATURES */ \ + .probe = dp83822_probe, \ + .soft_reset = dp83822_phy_reset, \ + .config_init = dp83822_config_init, \ + .read_status = dp83822_read_status, \ + .get_wol = dp83822_get_wol, \ + .set_wol = dp83822_set_wol, \ + .config_intr = dp83822_config_intr, \ + .handle_interrupt = dp83822_handle_interrupt, \ + .suspend = dp83822_suspend, \ + .resume = dp83822_resume, \ + } + +#define DP8382X_PHY_DRIVER(_id, _name) \ + { \ + PHY_ID_MATCH_MODEL(_id), \ + .name = (_name), \ + /* PHY_BASIC_FEATURES */ \ + .soft_reset = dp83822_phy_reset, \ + .config_init = dp8382x_config_init, \ + .get_wol = dp83822_get_wol, \ + .set_wol = dp83822_set_wol, \ + .config_intr = dp83822_config_intr, \ + .handle_interrupt = dp83822_handle_interrupt, \ + .suspend = dp83822_suspend, \ + .resume = dp83822_resume, \ + } + +static struct phy_driver dp83822_driver[] = { + DP83822_PHY_DRIVER(DP83822_PHY_ID, "TI DP83822"), + DP8382X_PHY_DRIVER(DP83825I_PHY_ID, "TI DP83825I"), + DP8382X_PHY_DRIVER(DP83826C_PHY_ID, "TI DP83826C"), + DP8382X_PHY_DRIVER(DP83826NC_PHY_ID, "TI DP83826NC"), + DP8382X_PHY_DRIVER(DP83825S_PHY_ID, "TI DP83825S"), + DP8382X_PHY_DRIVER(DP83825CM_PHY_ID, "TI DP83825M"), + DP8382X_PHY_DRIVER(DP83825CS_PHY_ID, "TI DP83825CS"), +}; +module_phy_driver(dp83822_driver); + +static struct mdio_device_id __maybe_unused dp83822_tbl[] = { + { DP83822_PHY_ID, 0xfffffff0 }, + { DP83825I_PHY_ID, 0xfffffff0 }, + { DP83826C_PHY_ID, 0xfffffff0 }, + { DP83826NC_PHY_ID, 0xfffffff0 }, + { DP83825S_PHY_ID, 0xfffffff0 }, + { DP83825CM_PHY_ID, 0xfffffff0 }, + { DP83825CS_PHY_ID, 0xfffffff0 }, + { }, +}; +MODULE_DEVICE_TABLE(mdio, dp83822_tbl); + +MODULE_DESCRIPTION("Texas Instruments DP83822 PHY driver"); +MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com"); +MODULE_LICENSE("GPL v2"); |