summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/ath/ath5k
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/ath/ath5k')
-rw-r--r--drivers/net/wireless/ath/ath5k/Kconfig73
-rw-r--r--drivers/net/wireless/ath/ath5k/Makefile23
-rw-r--r--drivers/net/wireless/ath/ath5k/ahb.c231
-rw-r--r--drivers/net/wireless/ath/ath5k/ani.c754
-rw-r--r--drivers/net/wireless/ath/ath5k/ani.h119
-rw-r--r--drivers/net/wireless/ath/ath5k/ath5k.h1714
-rw-r--r--drivers/net/wireless/ath/ath5k/attach.c359
-rw-r--r--drivers/net/wireless/ath/ath5k/base.c3248
-rw-r--r--drivers/net/wireless/ath/ath5k/base.h121
-rw-r--r--drivers/net/wireless/ath/ath5k/caps.c154
-rw-r--r--drivers/net/wireless/ath/ath5k/debug.c1105
-rw-r--r--drivers/net/wireless/ath/ath5k/debug.h165
-rw-r--r--drivers/net/wireless/ath/ath5k/desc.c786
-rw-r--r--drivers/net/wireless/ath/ath5k/desc.h367
-rw-r--r--drivers/net/wireless/ath/ath5k/dma.c913
-rw-r--r--drivers/net/wireless/ath/ath5k/eeprom.c1799
-rw-r--r--drivers/net/wireless/ath/ath5k/eeprom.h495
-rw-r--r--drivers/net/wireless/ath/ath5k/gpio.c213
-rw-r--r--drivers/net/wireless/ath/ath5k/initvals.c1605
-rw-r--r--drivers/net/wireless/ath/ath5k/led.c205
-rw-r--r--drivers/net/wireless/ath/ath5k/mac80211-ops.c821
-rw-r--r--drivers/net/wireless/ath/ath5k/pci.c341
-rw-r--r--drivers/net/wireless/ath/ath5k/pcu.c1011
-rw-r--r--drivers/net/wireless/ath/ath5k/phy.c3961
-rw-r--r--drivers/net/wireless/ath/ath5k/qcu.c729
-rw-r--r--drivers/net/wireless/ath/ath5k/reg.h2604
-rw-r--r--drivers/net/wireless/ath/ath5k/reset.c1380
-rw-r--r--drivers/net/wireless/ath/ath5k/rfbuffer.h853
-rw-r--r--drivers/net/wireless/ath/ath5k/rfgain.h534
-rw-r--r--drivers/net/wireless/ath/ath5k/rfkill.c115
-rw-r--r--drivers/net/wireless/ath/ath5k/sysfs.c123
-rw-r--r--drivers/net/wireless/ath/ath5k/trace.h107
32 files changed, 27028 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/ath5k/Kconfig b/drivers/net/wireless/ath/ath5k/Kconfig
new file mode 100644
index 000000000..6914b37bb
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/Kconfig
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: ISC
+config ATH5K
+ tristate "Atheros 5xxx wireless cards support"
+ depends on (PCI || ATH25) && MAC80211
+ select ATH_COMMON
+ select MAC80211_LEDS if LEDS_CLASS=y || LEDS_CLASS=MAC80211
+ select ATH5K_AHB if ATH25
+ select ATH5K_PCI if !ATH25
+ help
+ This module adds support for wireless adapters based on
+ Atheros 5xxx chipset.
+
+ Currently the following chip versions are supported:
+
+ MAC: AR5211 AR5212
+ PHY: RF5111/2111 RF5112/2112 RF5413/2413
+
+ This driver uses the kernel's mac80211 subsystem.
+
+ If you choose to build a module, it'll be called ath5k. Say M if
+ unsure.
+
+config ATH5K_DEBUG
+ bool "Atheros 5xxx debugging"
+ depends on ATH5K
+ help
+ Atheros 5xxx debugging messages.
+
+ Say Y, if and you will get debug options for ath5k.
+ To use this, you need to mount debugfs:
+
+ mount -t debugfs debug /sys/kernel/debug
+
+ You will get access to files under:
+ /sys/kernel/debug/ath5k/phy0/
+
+ To enable debug, pass the debug level to the debug module
+ parameter. For example:
+
+ modprobe ath5k debug=0x00000400
+
+config ATH5K_TRACER
+ bool "Atheros 5xxx tracer"
+ depends on ATH5K
+ depends on EVENT_TRACING
+ help
+ Say Y here to enable tracepoints for the ath5k driver
+ using the kernel tracing infrastructure. Select this
+ option if you are interested in debugging the driver.
+
+ If unsure, say N.
+
+config ATH5K_AHB
+ bool "Atheros 5xxx AHB bus support"
+ depends on ATH25 && ATH5K
+ help
+ This adds support for WiSoC type chipsets of the 5xxx Atheros
+ family.
+
+config ATH5K_PCI
+ bool "Atheros 5xxx PCI bus support"
+ depends on (!ATH25 && PCI)
+ help
+ This adds support for PCI type chipsets of the 5xxx Atheros
+ family.
+
+config ATH5K_TEST_CHANNELS
+ bool "Enables testing channels on ath5k"
+ depends on ATH5K && CFG80211_CERTIFICATION_ONUS
+ help
+ This enables non-standard IEEE 802.11 channels on ath5k, which
+ can be used for research purposes. This option should be disabled
+ unless doing research.
diff --git a/drivers/net/wireless/ath/ath5k/Makefile b/drivers/net/wireless/ath/ath5k/Makefile
new file mode 100644
index 000000000..78f318d49
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/Makefile
@@ -0,0 +1,23 @@
+# SPDX-License-Identifier: ISC
+ath5k-y += caps.o
+ath5k-y += initvals.o
+ath5k-y += eeprom.o
+ath5k-y += gpio.o
+ath5k-y += desc.o
+ath5k-y += dma.o
+ath5k-y += qcu.o
+ath5k-y += pcu.o
+ath5k-y += phy.o
+ath5k-y += reset.o
+ath5k-y += attach.o
+ath5k-y += base.o
+CFLAGS_base.o += -I$(src)
+ath5k-y += led.o
+ath5k-y += rfkill.o
+ath5k-y += ani.o
+ath5k-y += sysfs.o
+ath5k-y += mac80211-ops.o
+ath5k-$(CONFIG_ATH5K_DEBUG) += debug.o
+ath5k-$(CONFIG_ATH5K_AHB) += ahb.o
+ath5k-$(CONFIG_ATH5K_PCI) += pci.o
+obj-$(CONFIG_ATH5K) += ath5k.o
diff --git a/drivers/net/wireless/ath/ath5k/ahb.c b/drivers/net/wireless/ath/ath5k/ahb.c
new file mode 100644
index 000000000..28a1e5eff
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/ahb.c
@@ -0,0 +1,231 @@
+/*
+ * Copyright (c) 2008-2009 Atheros Communications Inc.
+ * Copyright (c) 2009 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (c) 2009 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/module.h>
+#include <linux/nl80211.h>
+#include <linux/platform_device.h>
+#include <linux/etherdevice.h>
+#include <ath25_platform.h>
+#include "ath5k.h"
+#include "debug.h"
+#include "base.h"
+#include "reg.h"
+
+/* return bus cachesize in 4B word units */
+static void ath5k_ahb_read_cachesize(struct ath_common *common, int *csz)
+{
+ *csz = L1_CACHE_BYTES >> 2;
+}
+
+static bool
+ath5k_ahb_eeprom_read(struct ath_common *common, u32 off, u16 *data)
+{
+ struct ath5k_hw *ah = common->priv;
+ struct platform_device *pdev = to_platform_device(ah->dev);
+ struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev);
+ u16 *eeprom, *eeprom_end;
+
+ eeprom = (u16 *) bcfg->radio;
+ eeprom_end = ((void *) bcfg->config) + BOARD_CONFIG_BUFSZ;
+
+ eeprom += off;
+ if (eeprom > eeprom_end)
+ return false;
+
+ *data = *eeprom;
+ return true;
+}
+
+int ath5k_hw_read_srev(struct ath5k_hw *ah)
+{
+ struct platform_device *pdev = to_platform_device(ah->dev);
+ struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev);
+ ah->ah_mac_srev = bcfg->devid;
+ return 0;
+}
+
+static int ath5k_ahb_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac)
+{
+ struct platform_device *pdev = to_platform_device(ah->dev);
+ struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev);
+ u8 *cfg_mac;
+
+ if (to_platform_device(ah->dev)->id == 0)
+ cfg_mac = bcfg->config->wlan0_mac;
+ else
+ cfg_mac = bcfg->config->wlan1_mac;
+
+ memcpy(mac, cfg_mac, ETH_ALEN);
+ return 0;
+}
+
+static const struct ath_bus_ops ath_ahb_bus_ops = {
+ .ath_bus_type = ATH_AHB,
+ .read_cachesize = ath5k_ahb_read_cachesize,
+ .eeprom_read = ath5k_ahb_eeprom_read,
+ .eeprom_read_mac = ath5k_ahb_eeprom_read_mac,
+};
+
+/*Initialization*/
+static int ath_ahb_probe(struct platform_device *pdev)
+{
+ struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev);
+ struct ath5k_hw *ah;
+ struct ieee80211_hw *hw;
+ struct resource *res;
+ void __iomem *mem;
+ int irq;
+ int ret = 0;
+ u32 reg;
+
+ if (!dev_get_platdata(&pdev->dev)) {
+ dev_err(&pdev->dev, "no platform data specified\n");
+ ret = -EINVAL;
+ goto err_out;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "no memory resource found\n");
+ ret = -ENXIO;
+ goto err_out;
+ }
+
+ mem = ioremap(res->start, resource_size(res));
+ if (mem == NULL) {
+ dev_err(&pdev->dev, "ioremap failed\n");
+ ret = -ENOMEM;
+ goto err_out;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "no IRQ resource found: %d\n", irq);
+ ret = irq;
+ goto err_iounmap;
+ }
+
+ hw = ieee80211_alloc_hw(sizeof(struct ath5k_hw), &ath5k_hw_ops);
+ if (hw == NULL) {
+ dev_err(&pdev->dev, "no memory for ieee80211_hw\n");
+ ret = -ENOMEM;
+ goto err_iounmap;
+ }
+
+ ah = hw->priv;
+ ah->hw = hw;
+ ah->dev = &pdev->dev;
+ ah->iobase = mem;
+ ah->irq = irq;
+ ah->devid = bcfg->devid;
+
+ if (bcfg->devid >= AR5K_SREV_AR2315_R6) {
+ /* Enable WMAC AHB arbitration */
+ reg = ioread32((void __iomem *) AR5K_AR2315_AHB_ARB_CTL);
+ reg |= AR5K_AR2315_AHB_ARB_CTL_WLAN;
+ iowrite32(reg, (void __iomem *) AR5K_AR2315_AHB_ARB_CTL);
+
+ /* Enable global WMAC swapping */
+ reg = ioread32((void __iomem *) AR5K_AR2315_BYTESWAP);
+ reg |= AR5K_AR2315_BYTESWAP_WMAC;
+ iowrite32(reg, (void __iomem *) AR5K_AR2315_BYTESWAP);
+ } else {
+ /* Enable WMAC DMA access (assuming 5312 or 231x*/
+ /* TODO: check other platforms */
+ reg = ioread32((void __iomem *) AR5K_AR5312_ENABLE);
+ if (to_platform_device(ah->dev)->id == 0)
+ reg |= AR5K_AR5312_ENABLE_WLAN0;
+ else
+ reg |= AR5K_AR5312_ENABLE_WLAN1;
+ iowrite32(reg, (void __iomem *) AR5K_AR5312_ENABLE);
+
+ /*
+ * On a dual-band AR5312, the multiband radio is only
+ * used as pass-through. Disable 2 GHz support in the
+ * driver for it
+ */
+ if (to_platform_device(ah->dev)->id == 0 &&
+ (bcfg->config->flags & (BD_WLAN0 | BD_WLAN1)) ==
+ (BD_WLAN1 | BD_WLAN0))
+ ah->ah_capabilities.cap_needs_2GHz_ovr = true;
+ else
+ ah->ah_capabilities.cap_needs_2GHz_ovr = false;
+ }
+
+ ret = ath5k_init_ah(ah, &ath_ahb_bus_ops);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "failed to attach device, err=%d\n", ret);
+ ret = -ENODEV;
+ goto err_free_hw;
+ }
+
+ platform_set_drvdata(pdev, hw);
+
+ return 0;
+
+ err_free_hw:
+ ieee80211_free_hw(hw);
+ err_iounmap:
+ iounmap(mem);
+ err_out:
+ return ret;
+}
+
+static int ath_ahb_remove(struct platform_device *pdev)
+{
+ struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev);
+ struct ieee80211_hw *hw = platform_get_drvdata(pdev);
+ struct ath5k_hw *ah;
+ u32 reg;
+
+ if (!hw)
+ return 0;
+
+ ah = hw->priv;
+
+ if (bcfg->devid >= AR5K_SREV_AR2315_R6) {
+ /* Disable WMAC AHB arbitration */
+ reg = ioread32((void __iomem *) AR5K_AR2315_AHB_ARB_CTL);
+ reg &= ~AR5K_AR2315_AHB_ARB_CTL_WLAN;
+ iowrite32(reg, (void __iomem *) AR5K_AR2315_AHB_ARB_CTL);
+ } else {
+ /*Stop DMA access */
+ reg = ioread32((void __iomem *) AR5K_AR5312_ENABLE);
+ if (to_platform_device(ah->dev)->id == 0)
+ reg &= ~AR5K_AR5312_ENABLE_WLAN0;
+ else
+ reg &= ~AR5K_AR5312_ENABLE_WLAN1;
+ iowrite32(reg, (void __iomem *) AR5K_AR5312_ENABLE);
+ }
+
+ ath5k_deinit_ah(ah);
+ iounmap(ah->iobase);
+ ieee80211_free_hw(hw);
+
+ return 0;
+}
+
+static struct platform_driver ath_ahb_driver = {
+ .probe = ath_ahb_probe,
+ .remove = ath_ahb_remove,
+ .driver = {
+ .name = "ar231x-wmac",
+ },
+};
+
+module_platform_driver(ath_ahb_driver);
diff --git a/drivers/net/wireless/ath/ath5k/ani.c b/drivers/net/wireless/ath/ath5k/ani.c
new file mode 100644
index 000000000..850c608b4
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/ani.c
@@ -0,0 +1,754 @@
+/*
+ * Copyright (C) 2010 Bruno Randolf <br1@einfach.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include "ath5k.h"
+#include "reg.h"
+#include "debug.h"
+#include "ani.h"
+
+/**
+ * DOC: Basic ANI Operation
+ *
+ * Adaptive Noise Immunity (ANI) controls five noise immunity parameters
+ * depending on the amount of interference in the environment, increasing
+ * or reducing sensitivity as necessary.
+ *
+ * The parameters are:
+ *
+ * - "noise immunity"
+ *
+ * - "spur immunity"
+ *
+ * - "firstep level"
+ *
+ * - "OFDM weak signal detection"
+ *
+ * - "CCK weak signal detection"
+ *
+ * Basically we look at the amount of ODFM and CCK timing errors we get and then
+ * raise or lower immunity accordingly by setting one or more of these
+ * parameters.
+ *
+ * Newer chipsets have PHY error counters in hardware which will generate a MIB
+ * interrupt when they overflow. Older hardware has too enable PHY error frames
+ * by setting a RX flag and then count every single PHY error. When a specified
+ * threshold of errors has been reached we will raise immunity.
+ * Also we regularly check the amount of errors and lower or raise immunity as
+ * necessary.
+ */
+
+
+/***********************\
+* ANI parameter control *
+\***********************/
+
+/**
+ * ath5k_ani_set_noise_immunity_level() - Set noise immunity level
+ * @ah: The &struct ath5k_hw
+ * @level: level between 0 and @ATH5K_ANI_MAX_NOISE_IMM_LVL
+ */
+void
+ath5k_ani_set_noise_immunity_level(struct ath5k_hw *ah, int level)
+{
+ /* TODO:
+ * ANI documents suggest the following five levels to use, but the HAL
+ * and ath9k use only the last two levels, making this
+ * essentially an on/off option. There *may* be a reason for this (???),
+ * so i stick with the HAL version for now...
+ */
+#if 0
+ static const s8 lo[] = { -52, -56, -60, -64, -70 };
+ static const s8 hi[] = { -18, -18, -16, -14, -12 };
+ static const s8 sz[] = { -34, -41, -48, -55, -62 };
+ static const s8 fr[] = { -70, -72, -75, -78, -80 };
+#else
+ static const s8 lo[] = { -64, -70 };
+ static const s8 hi[] = { -14, -12 };
+ static const s8 sz[] = { -55, -62 };
+ static const s8 fr[] = { -78, -80 };
+#endif
+ if (level < 0 || level >= ARRAY_SIZE(sz)) {
+ ATH5K_ERR(ah, "noise immunity level %d out of range",
+ level);
+ return;
+ }
+
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DESIRED_SIZE,
+ AR5K_PHY_DESIRED_SIZE_TOT, sz[level]);
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_AGCCOARSE,
+ AR5K_PHY_AGCCOARSE_LO, lo[level]);
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_AGCCOARSE,
+ AR5K_PHY_AGCCOARSE_HI, hi[level]);
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SIG,
+ AR5K_PHY_SIG_FIRPWR, fr[level]);
+
+ ah->ani_state.noise_imm_level = level;
+ ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "new level %d", level);
+}
+
+/**
+ * ath5k_ani_set_spur_immunity_level() - Set spur immunity level
+ * @ah: The &struct ath5k_hw
+ * @level: level between 0 and @max_spur_level (the maximum level is dependent
+ * on the chip revision).
+ */
+void
+ath5k_ani_set_spur_immunity_level(struct ath5k_hw *ah, int level)
+{
+ static const int val[] = { 2, 4, 6, 8, 10, 12, 14, 16 };
+
+ if (level < 0 || level >= ARRAY_SIZE(val) ||
+ level > ah->ani_state.max_spur_level) {
+ ATH5K_ERR(ah, "spur immunity level %d out of range",
+ level);
+ return;
+ }
+
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_OFDM_SELFCORR,
+ AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1, val[level]);
+
+ ah->ani_state.spur_level = level;
+ ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "new level %d", level);
+}
+
+/**
+ * ath5k_ani_set_firstep_level() - Set "firstep" level
+ * @ah: The &struct ath5k_hw
+ * @level: level between 0 and @ATH5K_ANI_MAX_FIRSTEP_LVL
+ */
+void
+ath5k_ani_set_firstep_level(struct ath5k_hw *ah, int level)
+{
+ static const int val[] = { 0, 4, 8 };
+
+ if (level < 0 || level >= ARRAY_SIZE(val)) {
+ ATH5K_ERR(ah, "firstep level %d out of range", level);
+ return;
+ }
+
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SIG,
+ AR5K_PHY_SIG_FIRSTEP, val[level]);
+
+ ah->ani_state.firstep_level = level;
+ ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "new level %d", level);
+}
+
+/**
+ * ath5k_ani_set_ofdm_weak_signal_detection() - Set OFDM weak signal detection
+ * @ah: The &struct ath5k_hw
+ * @on: turn on or off
+ */
+void
+ath5k_ani_set_ofdm_weak_signal_detection(struct ath5k_hw *ah, bool on)
+{
+ static const int m1l[] = { 127, 50 };
+ static const int m2l[] = { 127, 40 };
+ static const int m1[] = { 127, 0x4d };
+ static const int m2[] = { 127, 0x40 };
+ static const int m2cnt[] = { 31, 16 };
+ static const int m2lcnt[] = { 63, 48 };
+
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_WEAK_OFDM_LOW_THR,
+ AR5K_PHY_WEAK_OFDM_LOW_THR_M1, m1l[on]);
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_WEAK_OFDM_LOW_THR,
+ AR5K_PHY_WEAK_OFDM_LOW_THR_M2, m2l[on]);
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_WEAK_OFDM_HIGH_THR,
+ AR5K_PHY_WEAK_OFDM_HIGH_THR_M1, m1[on]);
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_WEAK_OFDM_HIGH_THR,
+ AR5K_PHY_WEAK_OFDM_HIGH_THR_M2, m2[on]);
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_WEAK_OFDM_HIGH_THR,
+ AR5K_PHY_WEAK_OFDM_HIGH_THR_M2_COUNT, m2cnt[on]);
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_WEAK_OFDM_LOW_THR,
+ AR5K_PHY_WEAK_OFDM_LOW_THR_M2_COUNT, m2lcnt[on]);
+
+ if (on)
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_WEAK_OFDM_LOW_THR,
+ AR5K_PHY_WEAK_OFDM_LOW_THR_SELFCOR_EN);
+ else
+ AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_WEAK_OFDM_LOW_THR,
+ AR5K_PHY_WEAK_OFDM_LOW_THR_SELFCOR_EN);
+
+ ah->ani_state.ofdm_weak_sig = on;
+ ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "turned %s",
+ on ? "on" : "off");
+}
+
+/**
+ * ath5k_ani_set_cck_weak_signal_detection() - Set CCK weak signal detection
+ * @ah: The &struct ath5k_hw
+ * @on: turn on or off
+ */
+void
+ath5k_ani_set_cck_weak_signal_detection(struct ath5k_hw *ah, bool on)
+{
+ static const int val[] = { 8, 6 };
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_CCK_CROSSCORR,
+ AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR, val[on]);
+ ah->ani_state.cck_weak_sig = on;
+ ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "turned %s",
+ on ? "on" : "off");
+}
+
+
+/***************\
+* ANI algorithm *
+\***************/
+
+/**
+ * ath5k_ani_raise_immunity() - Increase noise immunity
+ * @ah: The &struct ath5k_hw
+ * @as: The &struct ath5k_ani_state
+ * @ofdm_trigger: If this is true we are called because of too many OFDM errors,
+ * the algorithm will tune more parameters then.
+ *
+ * Try to raise noise immunity (=decrease sensitivity) in several steps
+ * depending on the average RSSI of the beacons we received.
+ */
+static void
+ath5k_ani_raise_immunity(struct ath5k_hw *ah, struct ath5k_ani_state *as,
+ bool ofdm_trigger)
+{
+ int rssi = ewma_beacon_rssi_read(&ah->ah_beacon_rssi_avg);
+
+ ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "raise immunity (%s)",
+ ofdm_trigger ? "ODFM" : "CCK");
+
+ /* first: raise noise immunity */
+ if (as->noise_imm_level < ATH5K_ANI_MAX_NOISE_IMM_LVL) {
+ ath5k_ani_set_noise_immunity_level(ah, as->noise_imm_level + 1);
+ return;
+ }
+
+ /* only OFDM: raise spur immunity level */
+ if (ofdm_trigger &&
+ as->spur_level < ah->ani_state.max_spur_level) {
+ ath5k_ani_set_spur_immunity_level(ah, as->spur_level + 1);
+ return;
+ }
+
+ /* AP mode */
+ if (ah->opmode == NL80211_IFTYPE_AP) {
+ if (as->firstep_level < ATH5K_ANI_MAX_FIRSTEP_LVL)
+ ath5k_ani_set_firstep_level(ah, as->firstep_level + 1);
+ return;
+ }
+
+ /* STA and IBSS mode */
+
+ /* TODO: for IBSS mode it would be better to keep a beacon RSSI average
+ * per each neighbour node and use the minimum of these, to make sure we
+ * don't shut out a remote node by raising immunity too high. */
+
+ if (rssi > ATH5K_ANI_RSSI_THR_HIGH) {
+ ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI,
+ "beacon RSSI high");
+ /* only OFDM: beacon RSSI is high, we can disable ODFM weak
+ * signal detection */
+ if (ofdm_trigger && as->ofdm_weak_sig) {
+ ath5k_ani_set_ofdm_weak_signal_detection(ah, false);
+ ath5k_ani_set_spur_immunity_level(ah, 0);
+ return;
+ }
+ /* as a last resort or CCK: raise firstep level */
+ if (as->firstep_level < ATH5K_ANI_MAX_FIRSTEP_LVL) {
+ ath5k_ani_set_firstep_level(ah, as->firstep_level + 1);
+ return;
+ }
+ } else if (rssi > ATH5K_ANI_RSSI_THR_LOW) {
+ /* beacon RSSI in mid range, we need OFDM weak signal detect,
+ * but can raise firstep level */
+ ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI,
+ "beacon RSSI mid");
+ if (ofdm_trigger && !as->ofdm_weak_sig)
+ ath5k_ani_set_ofdm_weak_signal_detection(ah, true);
+ if (as->firstep_level < ATH5K_ANI_MAX_FIRSTEP_LVL)
+ ath5k_ani_set_firstep_level(ah, as->firstep_level + 1);
+ return;
+ } else if (ah->ah_current_channel->band == NL80211_BAND_2GHZ) {
+ /* beacon RSSI is low. in B/G mode turn of OFDM weak signal
+ * detect and zero firstep level to maximize CCK sensitivity */
+ ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI,
+ "beacon RSSI low, 2GHz");
+ if (ofdm_trigger && as->ofdm_weak_sig)
+ ath5k_ani_set_ofdm_weak_signal_detection(ah, false);
+ if (as->firstep_level > 0)
+ ath5k_ani_set_firstep_level(ah, 0);
+ return;
+ }
+
+ /* TODO: why not?:
+ if (as->cck_weak_sig == true) {
+ ath5k_ani_set_cck_weak_signal_detection(ah, false);
+ }
+ */
+}
+
+/**
+ * ath5k_ani_lower_immunity() - Decrease noise immunity
+ * @ah: The &struct ath5k_hw
+ * @as: The &struct ath5k_ani_state
+ *
+ * Try to lower noise immunity (=increase sensitivity) in several steps
+ * depending on the average RSSI of the beacons we received.
+ */
+static void
+ath5k_ani_lower_immunity(struct ath5k_hw *ah, struct ath5k_ani_state *as)
+{
+ int rssi = ewma_beacon_rssi_read(&ah->ah_beacon_rssi_avg);
+
+ ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "lower immunity");
+
+ if (ah->opmode == NL80211_IFTYPE_AP) {
+ /* AP mode */
+ if (as->firstep_level > 0) {
+ ath5k_ani_set_firstep_level(ah, as->firstep_level - 1);
+ return;
+ }
+ } else {
+ /* STA and IBSS mode (see TODO above) */
+ if (rssi > ATH5K_ANI_RSSI_THR_HIGH) {
+ /* beacon signal is high, leave OFDM weak signal
+ * detection off or it may oscillate
+ * TODO: who said it's off??? */
+ } else if (rssi > ATH5K_ANI_RSSI_THR_LOW) {
+ /* beacon RSSI is mid-range: turn on ODFM weak signal
+ * detection and next, lower firstep level */
+ if (!as->ofdm_weak_sig) {
+ ath5k_ani_set_ofdm_weak_signal_detection(ah,
+ true);
+ return;
+ }
+ if (as->firstep_level > 0) {
+ ath5k_ani_set_firstep_level(ah,
+ as->firstep_level - 1);
+ return;
+ }
+ } else {
+ /* beacon signal is low: only reduce firstep level */
+ if (as->firstep_level > 0) {
+ ath5k_ani_set_firstep_level(ah,
+ as->firstep_level - 1);
+ return;
+ }
+ }
+ }
+
+ /* all modes */
+ if (as->spur_level > 0) {
+ ath5k_ani_set_spur_immunity_level(ah, as->spur_level - 1);
+ return;
+ }
+
+ /* finally, reduce noise immunity */
+ if (as->noise_imm_level > 0) {
+ ath5k_ani_set_noise_immunity_level(ah, as->noise_imm_level - 1);
+ return;
+ }
+}
+
+/**
+ * ath5k_hw_ani_get_listen_time() - Update counters and return listening time
+ * @ah: The &struct ath5k_hw
+ * @as: The &struct ath5k_ani_state
+ *
+ * Return an approximation of the time spent "listening" in milliseconds (ms)
+ * since the last call of this function.
+ * Save a snapshot of the counter values for debugging/statistics.
+ */
+static int
+ath5k_hw_ani_get_listen_time(struct ath5k_hw *ah, struct ath5k_ani_state *as)
+{
+ struct ath_common *common = ath5k_hw_common(ah);
+ int listen;
+
+ spin_lock_bh(&common->cc_lock);
+
+ ath_hw_cycle_counters_update(common);
+ memcpy(&as->last_cc, &common->cc_ani, sizeof(as->last_cc));
+
+ /* clears common->cc_ani */
+ listen = ath_hw_get_listen_time(common);
+
+ spin_unlock_bh(&common->cc_lock);
+
+ return listen;
+}
+
+/**
+ * ath5k_ani_save_and_clear_phy_errors() - Clear and save PHY error counters
+ * @ah: The &struct ath5k_hw
+ * @as: The &struct ath5k_ani_state
+ *
+ * Clear the PHY error counters as soon as possible, since this might be called
+ * from a MIB interrupt and we want to make sure we don't get interrupted again.
+ * Add the count of CCK and OFDM errors to our internal state, so it can be used
+ * by the algorithm later.
+ *
+ * Will be called from interrupt and tasklet context.
+ * Returns 0 if both counters are zero.
+ */
+static int
+ath5k_ani_save_and_clear_phy_errors(struct ath5k_hw *ah,
+ struct ath5k_ani_state *as)
+{
+ unsigned int ofdm_err, cck_err;
+
+ if (!ah->ah_capabilities.cap_has_phyerr_counters)
+ return 0;
+
+ ofdm_err = ath5k_hw_reg_read(ah, AR5K_PHYERR_CNT1);
+ cck_err = ath5k_hw_reg_read(ah, AR5K_PHYERR_CNT2);
+
+ /* reset counters first, we might be in a hurry (interrupt) */
+ ath5k_hw_reg_write(ah, ATH5K_PHYERR_CNT_MAX - ATH5K_ANI_OFDM_TRIG_HIGH,
+ AR5K_PHYERR_CNT1);
+ ath5k_hw_reg_write(ah, ATH5K_PHYERR_CNT_MAX - ATH5K_ANI_CCK_TRIG_HIGH,
+ AR5K_PHYERR_CNT2);
+
+ ofdm_err = ATH5K_ANI_OFDM_TRIG_HIGH - (ATH5K_PHYERR_CNT_MAX - ofdm_err);
+ cck_err = ATH5K_ANI_CCK_TRIG_HIGH - (ATH5K_PHYERR_CNT_MAX - cck_err);
+
+ /* sometimes both can be zero, especially when there is a superfluous
+ * second interrupt. detect that here and return an error. */
+ if (ofdm_err <= 0 && cck_err <= 0)
+ return 0;
+
+ /* avoid negative values should one of the registers overflow */
+ if (ofdm_err > 0) {
+ as->ofdm_errors += ofdm_err;
+ as->sum_ofdm_errors += ofdm_err;
+ }
+ if (cck_err > 0) {
+ as->cck_errors += cck_err;
+ as->sum_cck_errors += cck_err;
+ }
+ return 1;
+}
+
+/**
+ * ath5k_ani_period_restart() - Restart ANI period
+ * @as: The &struct ath5k_ani_state
+ *
+ * Just reset counters, so they are clear for the next "ani period".
+ */
+static void
+ath5k_ani_period_restart(struct ath5k_ani_state *as)
+{
+ /* keep last values for debugging */
+ as->last_ofdm_errors = as->ofdm_errors;
+ as->last_cck_errors = as->cck_errors;
+ as->last_listen = as->listen_time;
+
+ as->ofdm_errors = 0;
+ as->cck_errors = 0;
+ as->listen_time = 0;
+}
+
+/**
+ * ath5k_ani_calibration() - The main ANI calibration function
+ * @ah: The &struct ath5k_hw
+ *
+ * We count OFDM and CCK errors relative to the time where we did not send or
+ * receive ("listen" time) and raise or lower immunity accordingly.
+ * This is called regularly (every second) from the calibration timer, but also
+ * when an error threshold has been reached.
+ *
+ * In order to synchronize access from different contexts, this should be
+ * called only indirectly by scheduling the ANI tasklet!
+ */
+void
+ath5k_ani_calibration(struct ath5k_hw *ah)
+{
+ struct ath5k_ani_state *as = &ah->ani_state;
+ int listen, ofdm_high, ofdm_low, cck_high, cck_low;
+
+ /* get listen time since last call and add it to the counter because we
+ * might not have restarted the "ani period" last time.
+ * always do this to calculate the busy time also in manual mode */
+ listen = ath5k_hw_ani_get_listen_time(ah, as);
+ as->listen_time += listen;
+
+ if (as->ani_mode != ATH5K_ANI_MODE_AUTO)
+ return;
+
+ ath5k_ani_save_and_clear_phy_errors(ah, as);
+
+ ofdm_high = as->listen_time * ATH5K_ANI_OFDM_TRIG_HIGH / 1000;
+ cck_high = as->listen_time * ATH5K_ANI_CCK_TRIG_HIGH / 1000;
+ ofdm_low = as->listen_time * ATH5K_ANI_OFDM_TRIG_LOW / 1000;
+ cck_low = as->listen_time * ATH5K_ANI_CCK_TRIG_LOW / 1000;
+
+ ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI,
+ "listen %d (now %d)", as->listen_time, listen);
+ ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI,
+ "check high ofdm %d/%d cck %d/%d",
+ as->ofdm_errors, ofdm_high, as->cck_errors, cck_high);
+
+ if (as->ofdm_errors > ofdm_high || as->cck_errors > cck_high) {
+ /* too many PHY errors - we have to raise immunity */
+ bool ofdm_flag = as->ofdm_errors > ofdm_high;
+ ath5k_ani_raise_immunity(ah, as, ofdm_flag);
+ ath5k_ani_period_restart(as);
+
+ } else if (as->listen_time > 5 * ATH5K_ANI_LISTEN_PERIOD) {
+ /* If more than 5 (TODO: why 5?) periods have passed and we got
+ * relatively little errors we can try to lower immunity */
+ ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI,
+ "check low ofdm %d/%d cck %d/%d",
+ as->ofdm_errors, ofdm_low, as->cck_errors, cck_low);
+
+ if (as->ofdm_errors <= ofdm_low && as->cck_errors <= cck_low)
+ ath5k_ani_lower_immunity(ah, as);
+
+ ath5k_ani_period_restart(as);
+ }
+}
+
+
+/*******************\
+* Interrupt handler *
+\*******************/
+
+/**
+ * ath5k_ani_mib_intr() - Interrupt handler for ANI MIB counters
+ * @ah: The &struct ath5k_hw
+ *
+ * Just read & reset the registers quickly, so they don't generate more
+ * interrupts, save the counters and schedule the tasklet to decide whether
+ * to raise immunity or not.
+ *
+ * We just need to handle PHY error counters, ath5k_hw_update_mib_counters()
+ * should take care of all "normal" MIB interrupts.
+ */
+void
+ath5k_ani_mib_intr(struct ath5k_hw *ah)
+{
+ struct ath5k_ani_state *as = &ah->ani_state;
+
+ /* nothing to do here if HW does not have PHY error counters - they
+ * can't be the reason for the MIB interrupt then */
+ if (!ah->ah_capabilities.cap_has_phyerr_counters)
+ return;
+
+ /* not in use but clear anyways */
+ ath5k_hw_reg_write(ah, 0, AR5K_OFDM_FIL_CNT);
+ ath5k_hw_reg_write(ah, 0, AR5K_CCK_FIL_CNT);
+
+ if (ah->ani_state.ani_mode != ATH5K_ANI_MODE_AUTO)
+ return;
+
+ /* If one of the errors triggered, we can get a superfluous second
+ * interrupt, even though we have already reset the register. The
+ * function detects that so we can return early. */
+ if (ath5k_ani_save_and_clear_phy_errors(ah, as) == 0)
+ return;
+
+ if (as->ofdm_errors > ATH5K_ANI_OFDM_TRIG_HIGH ||
+ as->cck_errors > ATH5K_ANI_CCK_TRIG_HIGH)
+ tasklet_schedule(&ah->ani_tasklet);
+}
+
+/**
+ * ath5k_ani_phy_error_report - Used by older HW to report PHY errors
+ *
+ * @ah: The &struct ath5k_hw
+ * @phyerr: One of enum ath5k_phy_error_code
+ *
+ * This is used by hardware without PHY error counters to report PHY errors
+ * on a frame-by-frame basis, instead of the interrupt.
+ */
+void
+ath5k_ani_phy_error_report(struct ath5k_hw *ah,
+ enum ath5k_phy_error_code phyerr)
+{
+ struct ath5k_ani_state *as = &ah->ani_state;
+
+ if (phyerr == AR5K_RX_PHY_ERROR_OFDM_TIMING) {
+ as->ofdm_errors++;
+ if (as->ofdm_errors > ATH5K_ANI_OFDM_TRIG_HIGH)
+ tasklet_schedule(&ah->ani_tasklet);
+ } else if (phyerr == AR5K_RX_PHY_ERROR_CCK_TIMING) {
+ as->cck_errors++;
+ if (as->cck_errors > ATH5K_ANI_CCK_TRIG_HIGH)
+ tasklet_schedule(&ah->ani_tasklet);
+ }
+}
+
+
+/****************\
+* Initialization *
+\****************/
+
+/**
+ * ath5k_enable_phy_err_counters() - Enable PHY error counters
+ * @ah: The &struct ath5k_hw
+ *
+ * Enable PHY error counters for OFDM and CCK timing errors.
+ */
+static void
+ath5k_enable_phy_err_counters(struct ath5k_hw *ah)
+{
+ ath5k_hw_reg_write(ah, ATH5K_PHYERR_CNT_MAX - ATH5K_ANI_OFDM_TRIG_HIGH,
+ AR5K_PHYERR_CNT1);
+ ath5k_hw_reg_write(ah, ATH5K_PHYERR_CNT_MAX - ATH5K_ANI_CCK_TRIG_HIGH,
+ AR5K_PHYERR_CNT2);
+ ath5k_hw_reg_write(ah, AR5K_PHY_ERR_FIL_OFDM, AR5K_PHYERR_CNT1_MASK);
+ ath5k_hw_reg_write(ah, AR5K_PHY_ERR_FIL_CCK, AR5K_PHYERR_CNT2_MASK);
+
+ /* not in use */
+ ath5k_hw_reg_write(ah, 0, AR5K_OFDM_FIL_CNT);
+ ath5k_hw_reg_write(ah, 0, AR5K_CCK_FIL_CNT);
+}
+
+/**
+ * ath5k_disable_phy_err_counters() - Disable PHY error counters
+ * @ah: The &struct ath5k_hw
+ *
+ * Disable PHY error counters for OFDM and CCK timing errors.
+ */
+static void
+ath5k_disable_phy_err_counters(struct ath5k_hw *ah)
+{
+ ath5k_hw_reg_write(ah, 0, AR5K_PHYERR_CNT1);
+ ath5k_hw_reg_write(ah, 0, AR5K_PHYERR_CNT2);
+ ath5k_hw_reg_write(ah, 0, AR5K_PHYERR_CNT1_MASK);
+ ath5k_hw_reg_write(ah, 0, AR5K_PHYERR_CNT2_MASK);
+
+ /* not in use */
+ ath5k_hw_reg_write(ah, 0, AR5K_OFDM_FIL_CNT);
+ ath5k_hw_reg_write(ah, 0, AR5K_CCK_FIL_CNT);
+}
+
+/**
+ * ath5k_ani_init() - Initialize ANI
+ * @ah: The &struct ath5k_hw
+ * @mode: One of enum ath5k_ani_mode
+ *
+ * Initialize ANI according to mode.
+ */
+void
+ath5k_ani_init(struct ath5k_hw *ah, enum ath5k_ani_mode mode)
+{
+ /* ANI is only possible on 5212 and newer */
+ if (ah->ah_version < AR5K_AR5212)
+ return;
+
+ if (mode < ATH5K_ANI_MODE_OFF || mode > ATH5K_ANI_MODE_AUTO) {
+ ATH5K_ERR(ah, "ANI mode %d out of range", mode);
+ return;
+ }
+
+ /* clear old state information */
+ memset(&ah->ani_state, 0, sizeof(ah->ani_state));
+
+ /* older hardware has more spur levels than newer */
+ if (ah->ah_mac_srev < AR5K_SREV_AR2414)
+ ah->ani_state.max_spur_level = 7;
+ else
+ ah->ani_state.max_spur_level = 2;
+
+ /* initial values for our ani parameters */
+ if (mode == ATH5K_ANI_MODE_OFF) {
+ ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "ANI off\n");
+ } else if (mode == ATH5K_ANI_MODE_MANUAL_LOW) {
+ ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI,
+ "ANI manual low -> high sensitivity\n");
+ ath5k_ani_set_noise_immunity_level(ah, 0);
+ ath5k_ani_set_spur_immunity_level(ah, 0);
+ ath5k_ani_set_firstep_level(ah, 0);
+ ath5k_ani_set_ofdm_weak_signal_detection(ah, true);
+ ath5k_ani_set_cck_weak_signal_detection(ah, true);
+ } else if (mode == ATH5K_ANI_MODE_MANUAL_HIGH) {
+ ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI,
+ "ANI manual high -> low sensitivity\n");
+ ath5k_ani_set_noise_immunity_level(ah,
+ ATH5K_ANI_MAX_NOISE_IMM_LVL);
+ ath5k_ani_set_spur_immunity_level(ah,
+ ah->ani_state.max_spur_level);
+ ath5k_ani_set_firstep_level(ah, ATH5K_ANI_MAX_FIRSTEP_LVL);
+ ath5k_ani_set_ofdm_weak_signal_detection(ah, false);
+ ath5k_ani_set_cck_weak_signal_detection(ah, false);
+ } else if (mode == ATH5K_ANI_MODE_AUTO) {
+ ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "ANI auto\n");
+ ath5k_ani_set_noise_immunity_level(ah, 0);
+ ath5k_ani_set_spur_immunity_level(ah, 0);
+ ath5k_ani_set_firstep_level(ah, 0);
+ ath5k_ani_set_ofdm_weak_signal_detection(ah, true);
+ ath5k_ani_set_cck_weak_signal_detection(ah, false);
+ }
+
+ /* newer hardware has PHY error counter registers which we can use to
+ * get OFDM and CCK error counts. older hardware has to set rxfilter and
+ * report every single PHY error by calling ath5k_ani_phy_error_report()
+ */
+ if (mode == ATH5K_ANI_MODE_AUTO) {
+ if (ah->ah_capabilities.cap_has_phyerr_counters)
+ ath5k_enable_phy_err_counters(ah);
+ else
+ ath5k_hw_set_rx_filter(ah, ath5k_hw_get_rx_filter(ah) |
+ AR5K_RX_FILTER_PHYERR);
+ } else {
+ if (ah->ah_capabilities.cap_has_phyerr_counters)
+ ath5k_disable_phy_err_counters(ah);
+ else
+ ath5k_hw_set_rx_filter(ah, ath5k_hw_get_rx_filter(ah) &
+ ~AR5K_RX_FILTER_PHYERR);
+ }
+
+ ah->ani_state.ani_mode = mode;
+}
+
+
+/**************\
+* Debug output *
+\**************/
+
+#ifdef CONFIG_ATH5K_DEBUG
+
+/**
+ * ath5k_ani_print_counters() - Print ANI counters
+ * @ah: The &struct ath5k_hw
+ *
+ * Used for debugging ANI
+ */
+void
+ath5k_ani_print_counters(struct ath5k_hw *ah)
+{
+ /* clears too */
+ pr_notice("ACK fail\t%d\n", ath5k_hw_reg_read(ah, AR5K_ACK_FAIL));
+ pr_notice("RTS fail\t%d\n", ath5k_hw_reg_read(ah, AR5K_RTS_FAIL));
+ pr_notice("RTS success\t%d\n", ath5k_hw_reg_read(ah, AR5K_RTS_OK));
+ pr_notice("FCS error\t%d\n", ath5k_hw_reg_read(ah, AR5K_FCS_FAIL));
+
+ /* no clear */
+ pr_notice("tx\t%d\n", ath5k_hw_reg_read(ah, AR5K_PROFCNT_TX));
+ pr_notice("rx\t%d\n", ath5k_hw_reg_read(ah, AR5K_PROFCNT_RX));
+ pr_notice("busy\t%d\n", ath5k_hw_reg_read(ah, AR5K_PROFCNT_RXCLR));
+ pr_notice("cycles\t%d\n", ath5k_hw_reg_read(ah, AR5K_PROFCNT_CYCLE));
+
+ pr_notice("AR5K_PHYERR_CNT1\t%d\n",
+ ath5k_hw_reg_read(ah, AR5K_PHYERR_CNT1));
+ pr_notice("AR5K_PHYERR_CNT2\t%d\n",
+ ath5k_hw_reg_read(ah, AR5K_PHYERR_CNT2));
+ pr_notice("AR5K_OFDM_FIL_CNT\t%d\n",
+ ath5k_hw_reg_read(ah, AR5K_OFDM_FIL_CNT));
+ pr_notice("AR5K_CCK_FIL_CNT\t%d\n",
+ ath5k_hw_reg_read(ah, AR5K_CCK_FIL_CNT));
+}
+
+#endif
diff --git a/drivers/net/wireless/ath/ath5k/ani.h b/drivers/net/wireless/ath/ath5k/ani.h
new file mode 100644
index 000000000..21aa35546
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/ani.h
@@ -0,0 +1,119 @@
+/*
+ * Copyright (C) 2010 Bruno Randolf <br1@einfach.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+#ifndef ANI_H
+#define ANI_H
+
+#include "../ath.h"
+
+enum ath5k_phy_error_code;
+
+/* these thresholds are relative to the ATH5K_ANI_LISTEN_PERIOD */
+#define ATH5K_ANI_LISTEN_PERIOD 100
+#define ATH5K_ANI_OFDM_TRIG_HIGH 500
+#define ATH5K_ANI_OFDM_TRIG_LOW 200
+#define ATH5K_ANI_CCK_TRIG_HIGH 200
+#define ATH5K_ANI_CCK_TRIG_LOW 100
+
+/* average beacon RSSI thresholds */
+#define ATH5K_ANI_RSSI_THR_HIGH 40
+#define ATH5K_ANI_RSSI_THR_LOW 7
+
+/* maximum available levels */
+#define ATH5K_ANI_MAX_FIRSTEP_LVL 2
+#define ATH5K_ANI_MAX_NOISE_IMM_LVL 1
+
+
+/**
+ * enum ath5k_ani_mode - mode for ANI / noise sensitivity
+ *
+ * @ATH5K_ANI_MODE_OFF: Turn ANI off. This can be useful to just stop the ANI
+ * algorithm after it has been on auto mode.
+ * @ATH5K_ANI_MODE_MANUAL_LOW: Manually set all immunity parameters to low,
+ * maximizing sensitivity. ANI will not run.
+ * @ATH5K_ANI_MODE_MANUAL_HIGH: Manually set all immunity parameters to high,
+ * minimizing sensitivity. ANI will not run.
+ * @ATH5K_ANI_MODE_AUTO: Automatically control immunity parameters based on the
+ * amount of OFDM and CCK frame errors (default).
+ */
+enum ath5k_ani_mode {
+ ATH5K_ANI_MODE_OFF = 0,
+ ATH5K_ANI_MODE_MANUAL_LOW = 1,
+ ATH5K_ANI_MODE_MANUAL_HIGH = 2,
+ ATH5K_ANI_MODE_AUTO = 3
+};
+
+
+/**
+ * struct ath5k_ani_state - ANI state and associated counters
+ * @ani_mode: One of enum ath5k_ani_mode
+ * @noise_imm_level: Noise immunity level
+ * @spur_level: Spur immunity level
+ * @firstep_level: FIRstep level
+ * @ofdm_weak_sig: OFDM weak signal detection state (on/off)
+ * @cck_weak_sig: CCK weak signal detection state (on/off)
+ * @max_spur_level: Max spur immunity level (chip specific)
+ * @listen_time: Listen time
+ * @ofdm_errors: OFDM timing error count
+ * @cck_errors: CCK timing error count
+ * @last_cc: The &struct ath_cycle_counters (for stats)
+ * @last_listen: Listen time from previous run (for stats)
+ * @last_ofdm_errors: OFDM timing error count from previous run (for tats)
+ * @last_cck_errors: CCK timing error count from previous run (for stats)
+ * @sum_ofdm_errors: Sum of OFDM timing errors (for stats)
+ * @sum_cck_errors: Sum of all CCK timing errors (for stats)
+ */
+struct ath5k_ani_state {
+ enum ath5k_ani_mode ani_mode;
+
+ /* state */
+ int noise_imm_level;
+ int spur_level;
+ int firstep_level;
+ bool ofdm_weak_sig;
+ bool cck_weak_sig;
+
+ int max_spur_level;
+
+ /* used by the algorithm */
+ unsigned int listen_time;
+ unsigned int ofdm_errors;
+ unsigned int cck_errors;
+
+ /* debug/statistics only: numbers from last ANI calibration */
+ struct ath_cycle_counters last_cc;
+ unsigned int last_listen;
+ unsigned int last_ofdm_errors;
+ unsigned int last_cck_errors;
+ unsigned int sum_ofdm_errors;
+ unsigned int sum_cck_errors;
+};
+
+void ath5k_ani_init(struct ath5k_hw *ah, enum ath5k_ani_mode mode);
+void ath5k_ani_mib_intr(struct ath5k_hw *ah);
+void ath5k_ani_calibration(struct ath5k_hw *ah);
+void ath5k_ani_phy_error_report(struct ath5k_hw *ah,
+ enum ath5k_phy_error_code phyerr);
+
+/* for manual control */
+void ath5k_ani_set_noise_immunity_level(struct ath5k_hw *ah, int level);
+void ath5k_ani_set_spur_immunity_level(struct ath5k_hw *ah, int level);
+void ath5k_ani_set_firstep_level(struct ath5k_hw *ah, int level);
+void ath5k_ani_set_ofdm_weak_signal_detection(struct ath5k_hw *ah, bool on);
+void ath5k_ani_set_cck_weak_signal_detection(struct ath5k_hw *ah, bool on);
+
+void ath5k_ani_print_counters(struct ath5k_hw *ah);
+
+#endif /* ANI_H */
diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
new file mode 100644
index 000000000..f595204f4
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -0,0 +1,1714 @@
+/*
+ * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _ATH5K_H
+#define _ATH5K_H
+
+/* TODO: Clean up channel debugging (doesn't work anyway) and start
+ * working on reg. control code using all available eeprom information
+ * (rev. engineering needed) */
+#define CHAN_DEBUG 0
+
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/types.h>
+#include <linux/average.h>
+#include <linux/leds.h>
+#include <net/mac80211.h>
+#include <net/cfg80211.h>
+
+/* RX/TX descriptor hw structs
+ * TODO: Driver part should only see sw structs */
+#include "desc.h"
+
+/* EEPROM structs/offsets
+ * TODO: Make a more generic struct (eg. add more stuff to ath5k_capabilities)
+ * and clean up common bits, then introduce set/get functions in eeprom.c */
+#include "eeprom.h"
+#include "debug.h"
+#include "../ath.h"
+#include "ani.h"
+
+/* PCI IDs */
+#define PCI_DEVICE_ID_ATHEROS_AR5210 0x0007 /* AR5210 */
+#define PCI_DEVICE_ID_ATHEROS_AR5311 0x0011 /* AR5311 */
+#define PCI_DEVICE_ID_ATHEROS_AR5211 0x0012 /* AR5211 */
+#define PCI_DEVICE_ID_ATHEROS_AR5212 0x0013 /* AR5212 */
+#define PCI_DEVICE_ID_3COM_3CRDAG675 0x0013 /* 3CRDAG675 (Atheros AR5212) */
+#define PCI_DEVICE_ID_3COM_2_3CRPAG175 0x0013 /* 3CRPAG175 (Atheros AR5212) */
+#define PCI_DEVICE_ID_ATHEROS_AR5210_AP 0x0207 /* AR5210 (Early) */
+#define PCI_DEVICE_ID_ATHEROS_AR5212_IBM 0x1014 /* AR5212 (IBM MiniPCI) */
+#define PCI_DEVICE_ID_ATHEROS_AR5210_DEFAULT 0x1107 /* AR5210 (no eeprom) */
+#define PCI_DEVICE_ID_ATHEROS_AR5212_DEFAULT 0x1113 /* AR5212 (no eeprom) */
+#define PCI_DEVICE_ID_ATHEROS_AR5211_DEFAULT 0x1112 /* AR5211 (no eeprom) */
+#define PCI_DEVICE_ID_ATHEROS_AR5212_FPGA 0xf013 /* AR5212 (emulation board) */
+#define PCI_DEVICE_ID_ATHEROS_AR5211_LEGACY 0xff12 /* AR5211 (emulation board) */
+#define PCI_DEVICE_ID_ATHEROS_AR5211_FPGA11B 0xf11b /* AR5211 (emulation board) */
+#define PCI_DEVICE_ID_ATHEROS_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */
+#define PCI_DEVICE_ID_ATHEROS_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */
+#define PCI_DEVICE_ID_ATHEROS_AR5312_REV8 0x0058 /* AR5312 WMAC (AP43-030) */
+#define PCI_DEVICE_ID_ATHEROS_AR5212_0014 0x0014 /* AR5212 compatible */
+#define PCI_DEVICE_ID_ATHEROS_AR5212_0015 0x0015 /* AR5212 compatible */
+#define PCI_DEVICE_ID_ATHEROS_AR5212_0016 0x0016 /* AR5212 compatible */
+#define PCI_DEVICE_ID_ATHEROS_AR5212_0017 0x0017 /* AR5212 compatible */
+#define PCI_DEVICE_ID_ATHEROS_AR5212_0018 0x0018 /* AR5212 compatible */
+#define PCI_DEVICE_ID_ATHEROS_AR5212_0019 0x0019 /* AR5212 compatible */
+#define PCI_DEVICE_ID_ATHEROS_AR2413 0x001a /* AR2413 (Griffin-lite) */
+#define PCI_DEVICE_ID_ATHEROS_AR5413 0x001b /* AR5413 (Eagle) */
+#define PCI_DEVICE_ID_ATHEROS_AR5424 0x001c /* AR5424 (Condor PCI-E) */
+#define PCI_DEVICE_ID_ATHEROS_AR5416 0x0023 /* AR5416 */
+#define PCI_DEVICE_ID_ATHEROS_AR5418 0x0024 /* AR5418 */
+
+/****************************\
+ GENERIC DRIVER DEFINITIONS
+\****************************/
+
+#define ATH5K_PRINTF(fmt, ...) \
+ pr_warn("%s: " fmt, __func__, ##__VA_ARGS__)
+
+void __printf(3, 4)
+_ath5k_printk(const struct ath5k_hw *ah, const char *level,
+ const char *fmt, ...);
+
+#define ATH5K_PRINTK(_sc, _level, _fmt, ...) \
+ _ath5k_printk(_sc, _level, _fmt, ##__VA_ARGS__)
+
+#define ATH5K_PRINTK_LIMIT(_sc, _level, _fmt, ...) \
+do { \
+ if (net_ratelimit()) \
+ ATH5K_PRINTK(_sc, _level, _fmt, ##__VA_ARGS__); \
+} while (0)
+
+#define ATH5K_INFO(_sc, _fmt, ...) \
+ ATH5K_PRINTK(_sc, KERN_INFO, _fmt, ##__VA_ARGS__)
+
+#define ATH5K_WARN(_sc, _fmt, ...) \
+ ATH5K_PRINTK_LIMIT(_sc, KERN_WARNING, _fmt, ##__VA_ARGS__)
+
+#define ATH5K_ERR(_sc, _fmt, ...) \
+ ATH5K_PRINTK_LIMIT(_sc, KERN_ERR, _fmt, ##__VA_ARGS__)
+
+/*
+ * AR5K REGISTER ACCESS
+ */
+
+/* Some macros to read/write fields */
+
+/* First shift, then mask */
+#define AR5K_REG_SM(_val, _flags) \
+ (((_val) << _flags##_S) & (_flags))
+
+/* First mask, then shift */
+#define AR5K_REG_MS(_val, _flags) \
+ (((_val) & (_flags)) >> _flags##_S)
+
+/* Some registers can hold multiple values of interest. For this
+ * reason when we want to write to these registers we must first
+ * retrieve the values which we do not want to clear (lets call this
+ * old_data) and then set the register with this and our new_value:
+ * ( old_data | new_value) */
+#define AR5K_REG_WRITE_BITS(ah, _reg, _flags, _val) \
+ ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & ~(_flags)) | \
+ (((_val) << _flags##_S) & (_flags)), _reg)
+
+#define AR5K_REG_MASKED_BITS(ah, _reg, _flags, _mask) \
+ ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & \
+ (_mask)) | (_flags), _reg)
+
+#define AR5K_REG_ENABLE_BITS(ah, _reg, _flags) \
+ ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) | (_flags), _reg)
+
+#define AR5K_REG_DISABLE_BITS(ah, _reg, _flags) \
+ ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) & ~(_flags), _reg)
+
+/* Access QCU registers per queue */
+#define AR5K_REG_READ_Q(ah, _reg, _queue) \
+ (ath5k_hw_reg_read(ah, _reg) & (1 << _queue)) \
+
+#define AR5K_REG_WRITE_Q(ah, _reg, _queue) \
+ ath5k_hw_reg_write(ah, (1 << _queue), _reg)
+
+#define AR5K_Q_ENABLE_BITS(_reg, _queue) do { \
+ _reg |= 1 << _queue; \
+} while (0)
+
+#define AR5K_Q_DISABLE_BITS(_reg, _queue) do { \
+ _reg &= ~(1 << _queue); \
+} while (0)
+
+/* Used while writing initvals */
+#define AR5K_REG_WAIT(_i) do { \
+ if (_i % 64) \
+ udelay(1); \
+} while (0)
+
+/*
+ * Some tunable values (these should be changeable by the user)
+ * TODO: Make use of them and add more options OR use debug/configfs
+ */
+#define AR5K_TUNE_DMA_BEACON_RESP 2
+#define AR5K_TUNE_SW_BEACON_RESP 10
+#define AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF 0
+#define AR5K_TUNE_MIN_TX_FIFO_THRES 1
+#define AR5K_TUNE_MAX_TX_FIFO_THRES ((IEEE80211_MAX_FRAME_LEN / 64) + 1)
+#define AR5K_TUNE_REGISTER_TIMEOUT 20000
+/* Register for RSSI threshold has a mask of 0xff, so 255 seems to
+ * be the max value. */
+#define AR5K_TUNE_RSSI_THRES 129
+/* This must be set when setting the RSSI threshold otherwise it can
+ * prevent a reset. If AR5K_RSSI_THR is read after writing to it
+ * the BMISS_THRES will be seen as 0, seems hardware doesn't keep
+ * track of it. Max value depends on hardware. For AR5210 this is just 7.
+ * For AR5211+ this seems to be up to 255. */
+#define AR5K_TUNE_BMISS_THRES 7
+#define AR5K_TUNE_REGISTER_DWELL_TIME 20000
+#define AR5K_TUNE_BEACON_INTERVAL 100
+#define AR5K_TUNE_AIFS 2
+#define AR5K_TUNE_AIFS_11B 2
+#define AR5K_TUNE_AIFS_XR 0
+#define AR5K_TUNE_CWMIN 15
+#define AR5K_TUNE_CWMIN_11B 31
+#define AR5K_TUNE_CWMIN_XR 3
+#define AR5K_TUNE_CWMAX 1023
+#define AR5K_TUNE_CWMAX_11B 1023
+#define AR5K_TUNE_CWMAX_XR 7
+#define AR5K_TUNE_NOISE_FLOOR -72
+#define AR5K_TUNE_CCA_MAX_GOOD_VALUE -95
+#define AR5K_TUNE_MAX_TXPOWER 63
+#define AR5K_TUNE_DEFAULT_TXPOWER 25
+#define AR5K_TUNE_TPC_TXPOWER false
+#define ATH5K_TUNE_CALIBRATION_INTERVAL_FULL 60000 /* 60 sec */
+#define ATH5K_TUNE_CALIBRATION_INTERVAL_SHORT 10000 /* 10 sec */
+#define ATH5K_TUNE_CALIBRATION_INTERVAL_ANI 1000 /* 1 sec */
+#define ATH5K_TX_COMPLETE_POLL_INT 3000 /* 3 sec */
+
+#define AR5K_INIT_CARR_SENSE_EN 1
+
+/*Swap RX/TX Descriptor for big endian archs*/
+#if defined(__BIG_ENDIAN)
+#define AR5K_INIT_CFG ( \
+ AR5K_CFG_SWTD | AR5K_CFG_SWRD \
+)
+#else
+#define AR5K_INIT_CFG 0x00000000
+#endif
+
+/* Initial values */
+#define AR5K_INIT_CYCRSSI_THR1 2
+
+/* Tx retry limit defaults from standard */
+#define AR5K_INIT_RETRY_SHORT 7
+#define AR5K_INIT_RETRY_LONG 4
+
+/* Slot time */
+#define AR5K_INIT_SLOT_TIME_TURBO 6
+#define AR5K_INIT_SLOT_TIME_DEFAULT 9
+#define AR5K_INIT_SLOT_TIME_HALF_RATE 13
+#define AR5K_INIT_SLOT_TIME_QUARTER_RATE 21
+#define AR5K_INIT_SLOT_TIME_B 20
+#define AR5K_SLOT_TIME_MAX 0xffff
+
+/* SIFS */
+#define AR5K_INIT_SIFS_TURBO 6
+#define AR5K_INIT_SIFS_DEFAULT_BG 10
+#define AR5K_INIT_SIFS_DEFAULT_A 16
+#define AR5K_INIT_SIFS_HALF_RATE 32
+#define AR5K_INIT_SIFS_QUARTER_RATE 64
+
+/* Used to calculate tx time for non 5/10/40MHz
+ * operation */
+/* It's preamble time + signal time (16 + 4) */
+#define AR5K_INIT_OFDM_PREAMPLE_TIME 20
+/* Preamble time for 40MHz (turbo) operation (min ?) */
+#define AR5K_INIT_OFDM_PREAMBLE_TIME_MIN 14
+#define AR5K_INIT_OFDM_SYMBOL_TIME 4
+#define AR5K_INIT_OFDM_PLCP_BITS 22
+
+/* Rx latency for 5 and 10MHz operation (max ?) */
+#define AR5K_INIT_RX_LAT_MAX 63
+/* Tx latencies from initvals (5212 only but no problem
+ * because we only tweak them on 5212) */
+#define AR5K_INIT_TX_LAT_A 54
+#define AR5K_INIT_TX_LAT_BG 384
+/* Tx latency for 40MHz (turbo) operation (min ?) */
+#define AR5K_INIT_TX_LAT_MIN 32
+/* Default Tx/Rx latencies (same for 5211)*/
+#define AR5K_INIT_TX_LATENCY_5210 54
+#define AR5K_INIT_RX_LATENCY_5210 29
+
+/* Tx frame to Tx data start delay */
+#define AR5K_INIT_TXF2TXD_START_DEFAULT 14
+#define AR5K_INIT_TXF2TXD_START_DELAY_10MHZ 12
+#define AR5K_INIT_TXF2TXD_START_DELAY_5MHZ 13
+
+/* We need to increase PHY switch and agc settling time
+ * on turbo mode */
+#define AR5K_SWITCH_SETTLING 5760
+#define AR5K_SWITCH_SETTLING_TURBO 7168
+
+#define AR5K_AGC_SETTLING 28
+/* 38 on 5210 but shouldn't matter */
+#define AR5K_AGC_SETTLING_TURBO 37
+
+
+
+/*****************************\
+* GENERIC CHIPSET DEFINITIONS *
+\*****************************/
+
+/**
+ * enum ath5k_version - MAC Chips
+ * @AR5K_AR5210: AR5210 (Crete)
+ * @AR5K_AR5211: AR5211 (Oahu/Maui)
+ * @AR5K_AR5212: AR5212 (Venice) and newer
+ */
+enum ath5k_version {
+ AR5K_AR5210 = 0,
+ AR5K_AR5211 = 1,
+ AR5K_AR5212 = 2,
+};
+
+/**
+ * enum ath5k_radio - PHY Chips
+ * @AR5K_RF5110: RF5110 (Fez)
+ * @AR5K_RF5111: RF5111 (Sombrero)
+ * @AR5K_RF5112: RF2112/5112(A) (Derby/Derby2)
+ * @AR5K_RF2413: RF2413/2414 (Griffin/Griffin-Lite)
+ * @AR5K_RF5413: RF5413/5414/5424 (Eagle/Condor)
+ * @AR5K_RF2316: RF2315/2316 (Cobra SoC)
+ * @AR5K_RF2317: RF2317 (Spider SoC)
+ * @AR5K_RF2425: RF2425/2417 (Swan/Nalla)
+ */
+enum ath5k_radio {
+ AR5K_RF5110 = 0,
+ AR5K_RF5111 = 1,
+ AR5K_RF5112 = 2,
+ AR5K_RF2413 = 3,
+ AR5K_RF5413 = 4,
+ AR5K_RF2316 = 5,
+ AR5K_RF2317 = 6,
+ AR5K_RF2425 = 7,
+};
+
+/*
+ * Common silicon revision/version values
+ */
+
+#define AR5K_SREV_UNKNOWN 0xffff
+
+#define AR5K_SREV_AR5210 0x00 /* Crete */
+#define AR5K_SREV_AR5311 0x10 /* Maui 1 */
+#define AR5K_SREV_AR5311A 0x20 /* Maui 2 */
+#define AR5K_SREV_AR5311B 0x30 /* Spirit */
+#define AR5K_SREV_AR5211 0x40 /* Oahu */
+#define AR5K_SREV_AR5212 0x50 /* Venice */
+#define AR5K_SREV_AR5312_R2 0x52 /* AP31 */
+#define AR5K_SREV_AR5212_V4 0x54 /* ??? */
+#define AR5K_SREV_AR5213 0x55 /* ??? */
+#define AR5K_SREV_AR5312_R7 0x57 /* AP30 */
+#define AR5K_SREV_AR2313_R8 0x58 /* AP43 */
+#define AR5K_SREV_AR5213A 0x59 /* Hainan */
+#define AR5K_SREV_AR2413 0x78 /* Griffin lite */
+#define AR5K_SREV_AR2414 0x70 /* Griffin */
+#define AR5K_SREV_AR2315_R6 0x86 /* AP51-Light */
+#define AR5K_SREV_AR2315_R7 0x87 /* AP51-Full */
+#define AR5K_SREV_AR5424 0x90 /* Condor */
+#define AR5K_SREV_AR2317_R1 0x90 /* AP61-Light */
+#define AR5K_SREV_AR2317_R2 0x91 /* AP61-Full */
+#define AR5K_SREV_AR5413 0xa4 /* Eagle lite */
+#define AR5K_SREV_AR5414 0xa0 /* Eagle */
+#define AR5K_SREV_AR2415 0xb0 /* Talon */
+#define AR5K_SREV_AR5416 0xc0 /* PCI-E */
+#define AR5K_SREV_AR5418 0xca /* PCI-E */
+#define AR5K_SREV_AR2425 0xe0 /* Swan */
+#define AR5K_SREV_AR2417 0xf0 /* Nala */
+
+#define AR5K_SREV_RAD_5110 0x00
+#define AR5K_SREV_RAD_5111 0x10
+#define AR5K_SREV_RAD_5111A 0x15
+#define AR5K_SREV_RAD_2111 0x20
+#define AR5K_SREV_RAD_5112 0x30
+#define AR5K_SREV_RAD_5112A 0x35
+#define AR5K_SREV_RAD_5112B 0x36
+#define AR5K_SREV_RAD_2112 0x40
+#define AR5K_SREV_RAD_2112A 0x45
+#define AR5K_SREV_RAD_2112B 0x46
+#define AR5K_SREV_RAD_2413 0x50
+#define AR5K_SREV_RAD_5413 0x60
+#define AR5K_SREV_RAD_2316 0x70 /* Cobra SoC */
+#define AR5K_SREV_RAD_2317 0x80
+#define AR5K_SREV_RAD_5424 0xa0 /* Mostly same as 5413 */
+#define AR5K_SREV_RAD_2425 0xa2
+#define AR5K_SREV_RAD_5133 0xc0
+
+#define AR5K_SREV_PHY_5211 0x30
+#define AR5K_SREV_PHY_5212 0x41
+#define AR5K_SREV_PHY_5212A 0x42
+#define AR5K_SREV_PHY_5212B 0x43
+#define AR5K_SREV_PHY_2413 0x45
+#define AR5K_SREV_PHY_5413 0x61
+#define AR5K_SREV_PHY_2425 0x70
+
+/* TODO add support to mac80211 for vendor-specific rates and modes */
+
+/**
+ * DOC: Atheros XR
+ *
+ * Some of this information is based on Documentation from:
+ *
+ * http://madwifi-project.org/wiki/ChipsetFeatures/SuperAG
+ *
+ * Atheros' eXtended Range - range enhancing extension is a modulation scheme
+ * that is supposed to double the link distance between an Atheros XR-enabled
+ * client device with an Atheros XR-enabled access point. This is achieved
+ * by increasing the receiver sensitivity up to, -105dBm, which is about 20dB
+ * above what the 802.11 specifications demand. In addition, new (proprietary)
+ * data rates are introduced: 3, 2, 1, 0.5 and 0.25 MBit/s.
+ *
+ * Please note that can you either use XR or TURBO but you cannot use both,
+ * they are exclusive.
+ *
+ * Also note that we do not plan to support XR mode at least for now. You can
+ * get a mode similar to XR by using 5MHz bwmode.
+ */
+
+
+/**
+ * DOC: Atheros SuperAG
+ *
+ * In addition to XR we have another modulation scheme called TURBO mode
+ * that is supposed to provide a throughput transmission speed up to 40Mbit/s
+ * -60Mbit/s at a 108Mbit/s signaling rate achieved through the bonding of two
+ * 54Mbit/s 802.11g channels. To use this feature both ends must support it.
+ * There is also a distinction between "static" and "dynamic" turbo modes:
+ *
+ * - Static: is the dumb version: devices set to this mode stick to it until
+ * the mode is turned off.
+ *
+ * - Dynamic: is the intelligent version, the network decides itself if it
+ * is ok to use turbo. As soon as traffic is detected on adjacent channels
+ * (which would get used in turbo mode), or when a non-turbo station joins
+ * the network, turbo mode won't be used until the situation changes again.
+ * Dynamic mode is achieved by Atheros' Adaptive Radio (AR) feature which
+ * monitors the used radio band in order to decide whether turbo mode may
+ * be used or not.
+ *
+ * This article claims Super G sticks to bonding of channels 5 and 6 for
+ * USA:
+ *
+ * https://www.pcworld.com/article/id,113428-page,1/article.html
+ *
+ * The channel bonding seems to be driver specific though.
+ *
+ * In addition to TURBO modes we also have the following features for even
+ * greater speed-up:
+ *
+ * - Bursting: allows multiple frames to be sent at once, rather than pausing
+ * after each frame. Bursting is a standards-compliant feature that can be
+ * used with any Access Point.
+ *
+ * - Fast frames: increases the amount of information that can be sent per
+ * frame, also resulting in a reduction of transmission overhead. It is a
+ * proprietary feature that needs to be supported by the Access Point.
+ *
+ * - Compression: data frames are compressed in real time using a Lempel Ziv
+ * algorithm. This is done transparently. Once this feature is enabled,
+ * compression and decompression takes place inside the chipset, without
+ * putting additional load on the host CPU.
+ *
+ * As with XR we also don't plan to support SuperAG features for now. You can
+ * get a mode similar to TURBO by using 40MHz bwmode.
+ */
+
+
+/**
+ * enum ath5k_driver_mode - PHY operation mode
+ * @AR5K_MODE_11A: 802.11a
+ * @AR5K_MODE_11B: 802.11b
+ * @AR5K_MODE_11G: 801.11g
+ * @AR5K_MODE_MAX: Used for boundary checks
+ *
+ * Do not change the order here, we use these as
+ * array indices and it also maps EEPROM structures.
+ */
+enum ath5k_driver_mode {
+ AR5K_MODE_11A = 0,
+ AR5K_MODE_11B = 1,
+ AR5K_MODE_11G = 2,
+ AR5K_MODE_MAX = 3
+};
+
+/**
+ * enum ath5k_ant_mode - Antenna operation mode
+ * @AR5K_ANTMODE_DEFAULT: Default antenna setup
+ * @AR5K_ANTMODE_FIXED_A: Only antenna A is present
+ * @AR5K_ANTMODE_FIXED_B: Only antenna B is present
+ * @AR5K_ANTMODE_SINGLE_AP: STA locked on a single ap
+ * @AR5K_ANTMODE_SECTOR_AP: AP with tx antenna set on tx desc
+ * @AR5K_ANTMODE_SECTOR_STA: STA with tx antenna set on tx desc
+ * @AR5K_ANTMODE_DEBUG: Debug mode -A -> Rx, B-> Tx-
+ * @AR5K_ANTMODE_MAX: Used for boundary checks
+ *
+ * For more infos on antenna control check out phy.c
+ */
+enum ath5k_ant_mode {
+ AR5K_ANTMODE_DEFAULT = 0,
+ AR5K_ANTMODE_FIXED_A = 1,
+ AR5K_ANTMODE_FIXED_B = 2,
+ AR5K_ANTMODE_SINGLE_AP = 3,
+ AR5K_ANTMODE_SECTOR_AP = 4,
+ AR5K_ANTMODE_SECTOR_STA = 5,
+ AR5K_ANTMODE_DEBUG = 6,
+ AR5K_ANTMODE_MAX,
+};
+
+/**
+ * enum ath5k_bw_mode - Bandwidth operation mode
+ * @AR5K_BWMODE_DEFAULT: 20MHz, default operation
+ * @AR5K_BWMODE_5MHZ: Quarter rate
+ * @AR5K_BWMODE_10MHZ: Half rate
+ * @AR5K_BWMODE_40MHZ: Turbo
+ */
+enum ath5k_bw_mode {
+ AR5K_BWMODE_DEFAULT = 0,
+ AR5K_BWMODE_5MHZ = 1,
+ AR5K_BWMODE_10MHZ = 2,
+ AR5K_BWMODE_40MHZ = 3
+};
+
+
+
+/****************\
+ TX DEFINITIONS
+\****************/
+
+/**
+ * struct ath5k_tx_status - TX Status descriptor
+ * @ts_seqnum: Sequence number
+ * @ts_tstamp: Timestamp
+ * @ts_status: Status code
+ * @ts_final_idx: Final transmission series index
+ * @ts_final_retry: Final retry count
+ * @ts_rssi: RSSI for received ACK
+ * @ts_shortretry: Short retry count
+ * @ts_virtcol: Virtual collision count
+ * @ts_antenna: Antenna used
+ *
+ * TX status descriptor gets filled by the hw
+ * on each transmission attempt.
+ */
+struct ath5k_tx_status {
+ u16 ts_seqnum;
+ u16 ts_tstamp;
+ u8 ts_status;
+ u8 ts_final_idx;
+ u8 ts_final_retry;
+ s8 ts_rssi;
+ u8 ts_shortretry;
+ u8 ts_virtcol;
+ u8 ts_antenna;
+};
+
+#define AR5K_TXSTAT_ALTRATE 0x80
+#define AR5K_TXERR_XRETRY 0x01
+#define AR5K_TXERR_FILT 0x02
+#define AR5K_TXERR_FIFO 0x04
+
+/**
+ * enum ath5k_tx_queue - Queue types used to classify tx queues.
+ * @AR5K_TX_QUEUE_INACTIVE: q is unused -- see ath5k_hw_release_tx_queue
+ * @AR5K_TX_QUEUE_DATA: A normal data queue
+ * @AR5K_TX_QUEUE_BEACON: The beacon queue
+ * @AR5K_TX_QUEUE_CAB: The after-beacon queue
+ * @AR5K_TX_QUEUE_UAPSD: Unscheduled Automatic Power Save Delivery queue
+ */
+enum ath5k_tx_queue {
+ AR5K_TX_QUEUE_INACTIVE = 0,
+ AR5K_TX_QUEUE_DATA,
+ AR5K_TX_QUEUE_BEACON,
+ AR5K_TX_QUEUE_CAB,
+ AR5K_TX_QUEUE_UAPSD,
+};
+
+#define AR5K_NUM_TX_QUEUES 10
+#define AR5K_NUM_TX_QUEUES_NOQCU 2
+
+/**
+ * enum ath5k_tx_queue_subtype - Queue sub-types to classify normal data queues
+ * @AR5K_WME_AC_BK: Background traffic
+ * @AR5K_WME_AC_BE: Best-effort (normal) traffic
+ * @AR5K_WME_AC_VI: Video traffic
+ * @AR5K_WME_AC_VO: Voice traffic
+ *
+ * These are the 4 Access Categories as defined in
+ * WME spec. 0 is the lowest priority and 4 is the
+ * highest. Normal data that hasn't been classified
+ * goes to the Best Effort AC.
+ */
+enum ath5k_tx_queue_subtype {
+ AR5K_WME_AC_BK = 0,
+ AR5K_WME_AC_BE,
+ AR5K_WME_AC_VI,
+ AR5K_WME_AC_VO,
+};
+
+/**
+ * enum ath5k_tx_queue_id - Queue ID numbers as returned by the hw functions
+ * @AR5K_TX_QUEUE_ID_NOQCU_DATA: Data queue on AR5210 (no QCU available)
+ * @AR5K_TX_QUEUE_ID_NOQCU_BEACON: Beacon queue on AR5210 (no QCU available)
+ * @AR5K_TX_QUEUE_ID_DATA_MIN: Data queue min index
+ * @AR5K_TX_QUEUE_ID_DATA_MAX: Data queue max index
+ * @AR5K_TX_QUEUE_ID_CAB: Content after beacon queue
+ * @AR5K_TX_QUEUE_ID_BEACON: Beacon queue
+ * @AR5K_TX_QUEUE_ID_UAPSD: Urgent Automatic Power Save Delivery,
+ *
+ * Each number represents a hw queue. If hw does not support hw queues
+ * (eg 5210) all data goes in one queue.
+ */
+enum ath5k_tx_queue_id {
+ AR5K_TX_QUEUE_ID_NOQCU_DATA = 0,
+ AR5K_TX_QUEUE_ID_NOQCU_BEACON = 1,
+ AR5K_TX_QUEUE_ID_DATA_MIN = 0,
+ AR5K_TX_QUEUE_ID_DATA_MAX = 3,
+ AR5K_TX_QUEUE_ID_UAPSD = 7,
+ AR5K_TX_QUEUE_ID_CAB = 8,
+ AR5K_TX_QUEUE_ID_BEACON = 9,
+};
+
+/*
+ * Flags to set hw queue's parameters...
+ */
+#define AR5K_TXQ_FLAG_TXOKINT_ENABLE 0x0001 /* Enable TXOK interrupt */
+#define AR5K_TXQ_FLAG_TXERRINT_ENABLE 0x0002 /* Enable TXERR interrupt */
+#define AR5K_TXQ_FLAG_TXEOLINT_ENABLE 0x0004 /* Enable TXEOL interrupt -not used- */
+#define AR5K_TXQ_FLAG_TXDESCINT_ENABLE 0x0008 /* Enable TXDESC interrupt -not used- */
+#define AR5K_TXQ_FLAG_TXURNINT_ENABLE 0x0010 /* Enable TXURN interrupt */
+#define AR5K_TXQ_FLAG_CBRORNINT_ENABLE 0x0020 /* Enable CBRORN interrupt */
+#define AR5K_TXQ_FLAG_CBRURNINT_ENABLE 0x0040 /* Enable CBRURN interrupt */
+#define AR5K_TXQ_FLAG_QTRIGINT_ENABLE 0x0080 /* Enable QTRIG interrupt */
+#define AR5K_TXQ_FLAG_TXNOFRMINT_ENABLE 0x0100 /* Enable TXNOFRM interrupt */
+#define AR5K_TXQ_FLAG_BACKOFF_DISABLE 0x0200 /* Disable random post-backoff */
+#define AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE 0x0300 /* Enable ready time expiry policy (?)*/
+#define AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE 0x0800 /* Enable backoff while bursting */
+#define AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS 0x1000 /* Disable backoff while bursting */
+#define AR5K_TXQ_FLAG_COMPRESSION_ENABLE 0x2000 /* Enable hw compression -not implemented-*/
+
+/**
+ * struct ath5k_txq - Transmit queue state
+ * @qnum: Hardware q number
+ * @link: Link ptr in last TX desc
+ * @q: Transmit queue (&struct list_head)
+ * @lock: Lock on q and link
+ * @setup: Is the queue configured
+ * @txq_len:Number of queued buffers
+ * @txq_max: Max allowed num of queued buffers
+ * @txq_poll_mark: Used to check if queue got stuck
+ * @txq_stuck: Queue stuck counter
+ *
+ * One of these exists for each hardware transmit queue.
+ * Packets sent to us from above are assigned to queues based
+ * on their priority. Not all devices support a complete set
+ * of hardware transmit queues. For those devices the array
+ * sc_ac2q will map multiple priorities to fewer hardware queues
+ * (typically all to one hardware queue).
+ */
+struct ath5k_txq {
+ unsigned int qnum;
+ u32 *link;
+ struct list_head q;
+ spinlock_t lock;
+ bool setup;
+ int txq_len;
+ int txq_max;
+ bool txq_poll_mark;
+ unsigned int txq_stuck;
+};
+
+/**
+ * struct ath5k_txq_info - A struct to hold TX queue's parameters
+ * @tqi_type: One of enum ath5k_tx_queue
+ * @tqi_subtype: One of enum ath5k_tx_queue_subtype
+ * @tqi_flags: TX queue flags (see above)
+ * @tqi_aifs: Arbitrated Inter-frame Space
+ * @tqi_cw_min: Minimum Contention Window
+ * @tqi_cw_max: Maximum Contention Window
+ * @tqi_cbr_period: Constant bit rate period
+ * @tqi_ready_time: Time queue waits after an event when RDYTIME is enabled
+ */
+struct ath5k_txq_info {
+ enum ath5k_tx_queue tqi_type;
+ enum ath5k_tx_queue_subtype tqi_subtype;
+ u16 tqi_flags;
+ u8 tqi_aifs;
+ u16 tqi_cw_min;
+ u16 tqi_cw_max;
+ u32 tqi_cbr_period;
+ u32 tqi_cbr_overflow_limit;
+ u32 tqi_burst_time;
+ u32 tqi_ready_time;
+};
+
+/**
+ * enum ath5k_pkt_type - Transmit packet types
+ * @AR5K_PKT_TYPE_NORMAL: Normal data
+ * @AR5K_PKT_TYPE_ATIM: ATIM
+ * @AR5K_PKT_TYPE_PSPOLL: PS-Poll
+ * @AR5K_PKT_TYPE_BEACON: Beacon
+ * @AR5K_PKT_TYPE_PROBE_RESP: Probe response
+ * @AR5K_PKT_TYPE_PIFS: PIFS
+ * Used on tx control descriptor
+ */
+enum ath5k_pkt_type {
+ AR5K_PKT_TYPE_NORMAL = 0,
+ AR5K_PKT_TYPE_ATIM = 1,
+ AR5K_PKT_TYPE_PSPOLL = 2,
+ AR5K_PKT_TYPE_BEACON = 3,
+ AR5K_PKT_TYPE_PROBE_RESP = 4,
+ AR5K_PKT_TYPE_PIFS = 5,
+};
+
+/*
+ * TX power and TPC settings
+ */
+#define AR5K_TXPOWER_OFDM(_r, _v) ( \
+ ((0 & 1) << ((_v) + 6)) | \
+ (((ah->ah_txpower.txp_rates_power_table[(_r)]) & 0x3f) << (_v)) \
+)
+
+#define AR5K_TXPOWER_CCK(_r, _v) ( \
+ (ah->ah_txpower.txp_rates_power_table[(_r)] & 0x3f) << (_v) \
+)
+
+
+
+/****************\
+ RX DEFINITIONS
+\****************/
+
+/**
+ * struct ath5k_rx_status - RX Status descriptor
+ * @rs_datalen: Data length
+ * @rs_tstamp: Timestamp
+ * @rs_status: Status code
+ * @rs_phyerr: PHY error mask
+ * @rs_rssi: RSSI in 0.5dbm units
+ * @rs_keyix: Index to the key used for decrypting
+ * @rs_rate: Rate used to decode the frame
+ * @rs_antenna: Antenna used to receive the frame
+ * @rs_more: Indicates this is a frame fragment (Fast frames)
+ */
+struct ath5k_rx_status {
+ u16 rs_datalen;
+ u16 rs_tstamp;
+ u8 rs_status;
+ u8 rs_phyerr;
+ s8 rs_rssi;
+ u8 rs_keyix;
+ u8 rs_rate;
+ u8 rs_antenna;
+ u8 rs_more;
+};
+
+#define AR5K_RXERR_CRC 0x01
+#define AR5K_RXERR_PHY 0x02
+#define AR5K_RXERR_FIFO 0x04
+#define AR5K_RXERR_DECRYPT 0x08
+#define AR5K_RXERR_MIC 0x10
+#define AR5K_RXKEYIX_INVALID ((u8) -1)
+#define AR5K_TXKEYIX_INVALID ((u32) -1)
+
+
+/**************************\
+ BEACON TIMERS DEFINITIONS
+\**************************/
+
+#define AR5K_BEACON_PERIOD 0x0000ffff
+#define AR5K_BEACON_ENA 0x00800000 /*enable beacon xmit*/
+#define AR5K_BEACON_RESET_TSF 0x01000000 /*force a TSF reset*/
+
+
+/*
+ * TSF to TU conversion:
+ *
+ * TSF is a 64bit value in usec (microseconds).
+ * TU is a 32bit value and defined by IEEE802.11 (page 6) as "A measurement of
+ * time equal to 1024 usec", so it's roughly milliseconds (usec / 1024).
+ */
+#define TSF_TO_TU(_tsf) (u32)((_tsf) >> 10)
+
+
+
+/*******************************\
+ GAIN OPTIMIZATION DEFINITIONS
+\*******************************/
+
+/**
+ * enum ath5k_rfgain - RF Gain optimization engine state
+ * @AR5K_RFGAIN_INACTIVE: Engine disabled
+ * @AR5K_RFGAIN_ACTIVE: Probe active
+ * @AR5K_RFGAIN_READ_REQUESTED: Probe requested
+ * @AR5K_RFGAIN_NEED_CHANGE: Gain_F needs change
+ */
+enum ath5k_rfgain {
+ AR5K_RFGAIN_INACTIVE = 0,
+ AR5K_RFGAIN_ACTIVE,
+ AR5K_RFGAIN_READ_REQUESTED,
+ AR5K_RFGAIN_NEED_CHANGE,
+};
+
+/**
+ * struct ath5k_gain - RF Gain optimization engine state data
+ * @g_step_idx: Current step index
+ * @g_current: Current gain
+ * @g_target: Target gain
+ * @g_low: Low gain boundary
+ * @g_high: High gain boundary
+ * @g_f_corr: Gain_F correction
+ * @g_state: One of enum ath5k_rfgain
+ */
+struct ath5k_gain {
+ u8 g_step_idx;
+ u8 g_current;
+ u8 g_target;
+ u8 g_low;
+ u8 g_high;
+ u8 g_f_corr;
+ u8 g_state;
+};
+
+
+
+/********************\
+ COMMON DEFINITIONS
+\********************/
+
+#define AR5K_SLOT_TIME_9 396
+#define AR5K_SLOT_TIME_20 880
+#define AR5K_SLOT_TIME_MAX 0xffff
+
+/**
+ * struct ath5k_athchan_2ghz - 2GHz to 5GHZ map for RF5111
+ * @a2_flags: Channel flags (internal)
+ * @a2_athchan: HW channel number (internal)
+ *
+ * This structure is used to map 2GHz channels to
+ * 5GHz Atheros channels on 2111 frequency converter
+ * that comes together with RF5111
+ * TODO: Clean up
+ */
+struct ath5k_athchan_2ghz {
+ u32 a2_flags;
+ u16 a2_athchan;
+};
+
+/**
+ * enum ath5k_dmasize - DMA size definitions (2^(n+2))
+ * @AR5K_DMASIZE_4B: 4Bytes
+ * @AR5K_DMASIZE_8B: 8Bytes
+ * @AR5K_DMASIZE_16B: 16Bytes
+ * @AR5K_DMASIZE_32B: 32Bytes
+ * @AR5K_DMASIZE_64B: 64Bytes (Default)
+ * @AR5K_DMASIZE_128B: 128Bytes
+ * @AR5K_DMASIZE_256B: 256Bytes
+ * @AR5K_DMASIZE_512B: 512Bytes
+ *
+ * These are used to set DMA burst size on hw
+ *
+ * Note: Some platforms can't handle more than 4Bytes
+ * be careful on embedded boards.
+ */
+enum ath5k_dmasize {
+ AR5K_DMASIZE_4B = 0,
+ AR5K_DMASIZE_8B,
+ AR5K_DMASIZE_16B,
+ AR5K_DMASIZE_32B,
+ AR5K_DMASIZE_64B,
+ AR5K_DMASIZE_128B,
+ AR5K_DMASIZE_256B,
+ AR5K_DMASIZE_512B
+};
+
+
+
+/******************\
+ RATE DEFINITIONS
+\******************/
+
+/**
+ * DOC: Rate codes
+ *
+ * Seems the ar5xxx hardware supports up to 32 rates, indexed by 1-32.
+ *
+ * The rate code is used to get the RX rate or set the TX rate on the
+ * hardware descriptors. It is also used for internal modulation control
+ * and settings.
+ *
+ * This is the hardware rate map we are aware of (html unfriendly):
+ *
+ * Rate code Rate (Kbps)
+ * --------- -----------
+ * 0x01 3000 (XR)
+ * 0x02 1000 (XR)
+ * 0x03 250 (XR)
+ * 0x04 - 05 -Reserved-
+ * 0x06 2000 (XR)
+ * 0x07 500 (XR)
+ * 0x08 48000 (OFDM)
+ * 0x09 24000 (OFDM)
+ * 0x0A 12000 (OFDM)
+ * 0x0B 6000 (OFDM)
+ * 0x0C 54000 (OFDM)
+ * 0x0D 36000 (OFDM)
+ * 0x0E 18000 (OFDM)
+ * 0x0F 9000 (OFDM)
+ * 0x10 - 17 -Reserved-
+ * 0x18 11000L (CCK)
+ * 0x19 5500L (CCK)
+ * 0x1A 2000L (CCK)
+ * 0x1B 1000L (CCK)
+ * 0x1C 11000S (CCK)
+ * 0x1D 5500S (CCK)
+ * 0x1E 2000S (CCK)
+ * 0x1F -Reserved-
+ *
+ * "S" indicates CCK rates with short preamble and "L" with long preamble.
+ *
+ * AR5211 has different rate codes for CCK (802.11B) rates. It only uses the
+ * lowest 4 bits, so they are the same as above with a 0xF mask.
+ * (0xB, 0xA, 0x9 and 0x8 for 1M, 2M, 5.5M and 11M).
+ * We handle this in ath5k_setup_bands().
+ */
+#define AR5K_MAX_RATES 32
+
+/* B */
+#define ATH5K_RATE_CODE_1M 0x1B
+#define ATH5K_RATE_CODE_2M 0x1A
+#define ATH5K_RATE_CODE_5_5M 0x19
+#define ATH5K_RATE_CODE_11M 0x18
+/* A and G */
+#define ATH5K_RATE_CODE_6M 0x0B
+#define ATH5K_RATE_CODE_9M 0x0F
+#define ATH5K_RATE_CODE_12M 0x0A
+#define ATH5K_RATE_CODE_18M 0x0E
+#define ATH5K_RATE_CODE_24M 0x09
+#define ATH5K_RATE_CODE_36M 0x0D
+#define ATH5K_RATE_CODE_48M 0x08
+#define ATH5K_RATE_CODE_54M 0x0C
+
+/* Adding this flag to rate_code on B rates
+ * enables short preamble */
+#define AR5K_SET_SHORT_PREAMBLE 0x04
+
+/*
+ * Crypto definitions
+ */
+
+#define AR5K_KEYCACHE_SIZE 8
+extern bool ath5k_modparam_nohwcrypt;
+
+/***********************\
+ HW RELATED DEFINITIONS
+\***********************/
+
+/*
+ * Misc definitions
+ */
+#define AR5K_RSSI_EP_MULTIPLIER (1 << 7)
+
+#define AR5K_ASSERT_ENTRY(_e, _s) do { \
+ if (_e >= _s) \
+ return false; \
+} while (0)
+
+/*
+ * Hardware interrupt abstraction
+ */
+
+/**
+ * enum ath5k_int - Hardware interrupt masks helpers
+ * @AR5K_INT_RXOK: Frame successfully received
+ * @AR5K_INT_RXDESC: Request RX descriptor/Read RX descriptor
+ * @AR5K_INT_RXERR: Frame reception failed
+ * @AR5K_INT_RXNOFRM: No frame received within a specified time period
+ * @AR5K_INT_RXEOL: Reached "End Of List", means we need more RX descriptors
+ * @AR5K_INT_RXORN: Indicates we got RX FIFO overrun. Note that Rx overrun is
+ * not always fatal, on some chips we can continue operation
+ * without resetting the card, that's why %AR5K_INT_FATAL is not
+ * common for all chips.
+ * @AR5K_INT_RX_ALL: Mask to identify all RX related interrupts
+ *
+ * @AR5K_INT_TXOK: Frame transmission success
+ * @AR5K_INT_TXDESC: Request TX descriptor/Read TX status descriptor
+ * @AR5K_INT_TXERR: Frame transmission failure
+ * @AR5K_INT_TXEOL: Received End Of List for VEOL (Virtual End Of List). The
+ * Queue Control Unit (QCU) signals an EOL interrupt only if a
+ * descriptor's LinkPtr is NULL. For more details, refer to:
+ * "http://www.freepatentsonline.com/20030225739.html"
+ * @AR5K_INT_TXNOFRM: No frame was transmitted within a specified time period
+ * @AR5K_INT_TXURN: Indicates we got TX FIFO underrun. In such case we should
+ * increase the TX trigger threshold.
+ * @AR5K_INT_TX_ALL: Mask to identify all TX related interrupts
+ *
+ * @AR5K_INT_MIB: Indicates the either Management Information Base counters or
+ * one of the PHY error counters reached the maximum value and
+ * should be read and cleared.
+ * @AR5K_INT_SWI: Software triggered interrupt.
+ * @AR5K_INT_RXPHY: RX PHY Error
+ * @AR5K_INT_RXKCM: RX Key cache miss
+ * @AR5K_INT_SWBA: SoftWare Beacon Alert - indicates its time to send a
+ * beacon that must be handled in software. The alternative is if
+ * you have VEOL support, in that case you let the hardware deal
+ * with things.
+ * @AR5K_INT_BRSSI: Beacon received with an RSSI value below our threshold
+ * @AR5K_INT_BMISS: If in STA mode this indicates we have stopped seeing
+ * beacons from the AP have associated with, we should probably
+ * try to reassociate. When in IBSS mode this might mean we have
+ * not received any beacons from any local stations. Note that
+ * every station in an IBSS schedules to send beacons at the
+ * Target Beacon Transmission Time (TBTT) with a random backoff.
+ * @AR5K_INT_BNR: Beacon queue got triggered (DMA beacon alert) while empty.
+ * @AR5K_INT_TIM: Beacon with local station's TIM bit set
+ * @AR5K_INT_DTIM: Beacon with DTIM bit and zero DTIM count received
+ * @AR5K_INT_DTIM_SYNC: DTIM sync lost
+ * @AR5K_INT_GPIO: GPIO interrupt is used for RF Kill switches connected to
+ * our GPIO pins.
+ * @AR5K_INT_BCN_TIMEOUT: Beacon timeout, we waited after TBTT but got noting
+ * @AR5K_INT_CAB_TIMEOUT: We waited for CAB traffic after the beacon but got
+ * nothing or an incomplete CAB frame sequence.
+ * @AR5K_INT_QCBRORN: A queue got it's CBR counter expired
+ * @AR5K_INT_QCBRURN: A queue got triggered wile empty
+ * @AR5K_INT_QTRIG: A queue got triggered
+ *
+ * @AR5K_INT_FATAL: Fatal errors were encountered, typically caused by bus/DMA
+ * errors. Indicates we need to reset the card.
+ * @AR5K_INT_GLOBAL: Used to clear and set the IER
+ * @AR5K_INT_NOCARD: Signals the card has been removed
+ * @AR5K_INT_COMMON: Common interrupts shared among MACs with the same
+ * bit value
+ *
+ * These are mapped to take advantage of some common bits
+ * between the MACs, to be able to set intr properties
+ * easier. Some of them are not used yet inside hw.c. Most map
+ * to the respective hw interrupt value as they are common among different
+ * MACs.
+ */
+enum ath5k_int {
+ AR5K_INT_RXOK = 0x00000001,
+ AR5K_INT_RXDESC = 0x00000002,
+ AR5K_INT_RXERR = 0x00000004,
+ AR5K_INT_RXNOFRM = 0x00000008,
+ AR5K_INT_RXEOL = 0x00000010,
+ AR5K_INT_RXORN = 0x00000020,
+ AR5K_INT_TXOK = 0x00000040,
+ AR5K_INT_TXDESC = 0x00000080,
+ AR5K_INT_TXERR = 0x00000100,
+ AR5K_INT_TXNOFRM = 0x00000200,
+ AR5K_INT_TXEOL = 0x00000400,
+ AR5K_INT_TXURN = 0x00000800,
+ AR5K_INT_MIB = 0x00001000,
+ AR5K_INT_SWI = 0x00002000,
+ AR5K_INT_RXPHY = 0x00004000,
+ AR5K_INT_RXKCM = 0x00008000,
+ AR5K_INT_SWBA = 0x00010000,
+ AR5K_INT_BRSSI = 0x00020000,
+ AR5K_INT_BMISS = 0x00040000,
+ AR5K_INT_FATAL = 0x00080000, /* Non common */
+ AR5K_INT_BNR = 0x00100000, /* Non common */
+ AR5K_INT_TIM = 0x00200000, /* Non common */
+ AR5K_INT_DTIM = 0x00400000, /* Non common */
+ AR5K_INT_DTIM_SYNC = 0x00800000, /* Non common */
+ AR5K_INT_GPIO = 0x01000000,
+ AR5K_INT_BCN_TIMEOUT = 0x02000000, /* Non common */
+ AR5K_INT_CAB_TIMEOUT = 0x04000000, /* Non common */
+ AR5K_INT_QCBRORN = 0x08000000, /* Non common */
+ AR5K_INT_QCBRURN = 0x10000000, /* Non common */
+ AR5K_INT_QTRIG = 0x20000000, /* Non common */
+ AR5K_INT_GLOBAL = 0x80000000,
+
+ AR5K_INT_TX_ALL = AR5K_INT_TXOK
+ | AR5K_INT_TXDESC
+ | AR5K_INT_TXERR
+ | AR5K_INT_TXNOFRM
+ | AR5K_INT_TXEOL
+ | AR5K_INT_TXURN,
+
+ AR5K_INT_RX_ALL = AR5K_INT_RXOK
+ | AR5K_INT_RXDESC
+ | AR5K_INT_RXERR
+ | AR5K_INT_RXNOFRM
+ | AR5K_INT_RXEOL
+ | AR5K_INT_RXORN,
+
+ AR5K_INT_COMMON = AR5K_INT_RXOK
+ | AR5K_INT_RXDESC
+ | AR5K_INT_RXERR
+ | AR5K_INT_RXNOFRM
+ | AR5K_INT_RXEOL
+ | AR5K_INT_RXORN
+ | AR5K_INT_TXOK
+ | AR5K_INT_TXDESC
+ | AR5K_INT_TXERR
+ | AR5K_INT_TXNOFRM
+ | AR5K_INT_TXEOL
+ | AR5K_INT_TXURN
+ | AR5K_INT_MIB
+ | AR5K_INT_SWI
+ | AR5K_INT_RXPHY
+ | AR5K_INT_RXKCM
+ | AR5K_INT_SWBA
+ | AR5K_INT_BRSSI
+ | AR5K_INT_BMISS
+ | AR5K_INT_GPIO
+ | AR5K_INT_GLOBAL,
+
+ AR5K_INT_NOCARD = 0xffffffff
+};
+
+/**
+ * enum ath5k_calibration_mask - Mask which calibration is active at the moment
+ * @AR5K_CALIBRATION_FULL: Full calibration (AGC + SHORT)
+ * @AR5K_CALIBRATION_SHORT: Short calibration (NF + I/Q)
+ * @AR5K_CALIBRATION_NF: Noise Floor calibration
+ * @AR5K_CALIBRATION_ANI: Adaptive Noise Immunity
+ */
+enum ath5k_calibration_mask {
+ AR5K_CALIBRATION_FULL = 0x01,
+ AR5K_CALIBRATION_SHORT = 0x02,
+ AR5K_CALIBRATION_NF = 0x04,
+ AR5K_CALIBRATION_ANI = 0x08,
+};
+
+/**
+ * enum ath5k_power_mode - Power management modes
+ * @AR5K_PM_UNDEFINED: Undefined
+ * @AR5K_PM_AUTO: Allow card to sleep if possible
+ * @AR5K_PM_AWAKE: Force card to wake up
+ * @AR5K_PM_FULL_SLEEP: Force card to full sleep (DANGEROUS)
+ * @AR5K_PM_NETWORK_SLEEP: Allow to sleep for a specified duration
+ *
+ * Currently only PM_AWAKE is used, FULL_SLEEP and NETWORK_SLEEP/AUTO
+ * are also known to have problems on some cards. This is not a big
+ * problem though because we can have almost the same effect as
+ * FULL_SLEEP by putting card on warm reset (it's almost powered down).
+ */
+enum ath5k_power_mode {
+ AR5K_PM_UNDEFINED = 0,
+ AR5K_PM_AUTO,
+ AR5K_PM_AWAKE,
+ AR5K_PM_FULL_SLEEP,
+ AR5K_PM_NETWORK_SLEEP,
+};
+
+/*
+ * These match net80211 definitions (not used in
+ * mac80211).
+ * TODO: Clean this up
+ */
+#define AR5K_LED_INIT 0 /*IEEE80211_S_INIT*/
+#define AR5K_LED_SCAN 1 /*IEEE80211_S_SCAN*/
+#define AR5K_LED_AUTH 2 /*IEEE80211_S_AUTH*/
+#define AR5K_LED_ASSOC 3 /*IEEE80211_S_ASSOC*/
+#define AR5K_LED_RUN 4 /*IEEE80211_S_RUN*/
+
+/* GPIO-controlled software LED */
+#define AR5K_SOFTLED_PIN 0
+#define AR5K_SOFTLED_ON 0
+#define AR5K_SOFTLED_OFF 1
+
+
+/* XXX: we *may* move cap_range stuff to struct wiphy */
+struct ath5k_capabilities {
+ /*
+ * Supported PHY modes
+ * (ie. AR5K_MODE_11A, AR5K_MODE_11B, ...)
+ */
+ DECLARE_BITMAP(cap_mode, AR5K_MODE_MAX);
+
+ /*
+ * Frequency range (without regulation restrictions)
+ */
+ struct {
+ u16 range_2ghz_min;
+ u16 range_2ghz_max;
+ u16 range_5ghz_min;
+ u16 range_5ghz_max;
+ } cap_range;
+
+ /*
+ * Values stored in the EEPROM (some of them...)
+ */
+ struct ath5k_eeprom_info cap_eeprom;
+
+ /*
+ * Queue information
+ */
+ struct {
+ u8 q_tx_num;
+ } cap_queues;
+
+ bool cap_has_phyerr_counters;
+ bool cap_has_mrr_support;
+ bool cap_needs_2GHz_ovr;
+};
+
+/* size of noise floor history (keep it a power of two) */
+#define ATH5K_NF_CAL_HIST_MAX 8
+struct ath5k_nfcal_hist {
+ s16 index; /* current index into nfval */
+ s16 nfval[ATH5K_NF_CAL_HIST_MAX]; /* last few noise floors */
+};
+
+#define ATH5K_LED_MAX_NAME_LEN 31
+
+/*
+ * State for LED triggers
+ */
+struct ath5k_led {
+ char name[ATH5K_LED_MAX_NAME_LEN + 1]; /* name of the LED in sysfs */
+ struct ath5k_hw *ah; /* driver state */
+ struct led_classdev led_dev; /* led classdev */
+};
+
+/* Rfkill */
+struct ath5k_rfkill {
+ /* GPIO PIN for rfkill */
+ u16 gpio;
+ /* polarity of rfkill GPIO PIN */
+ bool polarity;
+ /* RFKILL toggle tasklet */
+ struct tasklet_struct toggleq;
+};
+
+/* statistics */
+struct ath5k_statistics {
+ /* antenna use */
+ unsigned int antenna_rx[5]; /* frames count per antenna RX */
+ unsigned int antenna_tx[5]; /* frames count per antenna TX */
+
+ /* frame errors */
+ unsigned int rx_all_count; /* all RX frames, including errors */
+ unsigned int tx_all_count; /* all TX frames, including errors */
+ unsigned int rx_bytes_count; /* all RX bytes, including errored pkts
+ * and the MAC headers for each packet
+ */
+ unsigned int tx_bytes_count; /* all TX bytes, including errored pkts
+ * and the MAC headers and padding for
+ * each packet.
+ */
+ unsigned int rxerr_crc;
+ unsigned int rxerr_phy;
+ unsigned int rxerr_phy_code[32];
+ unsigned int rxerr_fifo;
+ unsigned int rxerr_decrypt;
+ unsigned int rxerr_mic;
+ unsigned int rxerr_proc;
+ unsigned int rxerr_jumbo;
+ unsigned int txerr_retry;
+ unsigned int txerr_fifo;
+ unsigned int txerr_filt;
+
+ /* MIB counters */
+ unsigned int ack_fail;
+ unsigned int rts_fail;
+ unsigned int rts_ok;
+ unsigned int fcs_error;
+ unsigned int beacons;
+
+ unsigned int mib_intr;
+ unsigned int rxorn_intr;
+ unsigned int rxeol_intr;
+};
+
+/*
+ * Misc defines
+ */
+
+#define AR5K_MAX_GPIO 10
+#define AR5K_MAX_RF_BANKS 8
+
+#if CHAN_DEBUG
+#define ATH_CHAN_MAX (26 + 26 + 26 + 200 + 200)
+#else
+#define ATH_CHAN_MAX (14 + 14 + 14 + 252 + 20)
+#endif
+
+#define ATH_RXBUF 40 /* number of RX buffers */
+#define ATH_TXBUF 200 /* number of TX buffers */
+#define ATH_BCBUF 4 /* number of beacon buffers */
+#define ATH5K_TXQ_LEN_MAX (ATH_TXBUF / 4) /* bufs per queue */
+#define ATH5K_TXQ_LEN_LOW (ATH5K_TXQ_LEN_MAX / 2) /* low mark */
+
+DECLARE_EWMA(beacon_rssi, 10, 8)
+
+/* Driver state associated with an instance of a device */
+struct ath5k_hw {
+ struct ath_common common;
+
+ struct pci_dev *pdev;
+ struct device *dev; /* for dma mapping */
+ int irq;
+ u16 devid;
+ void __iomem *iobase; /* address of the device */
+ struct mutex lock; /* dev-level lock */
+ struct ieee80211_hw *hw; /* IEEE 802.11 common */
+ struct ieee80211_supported_band sbands[NUM_NL80211_BANDS];
+ struct ieee80211_channel channels[ATH_CHAN_MAX];
+ struct ieee80211_rate rates[NUM_NL80211_BANDS][AR5K_MAX_RATES];
+ s8 rate_idx[NUM_NL80211_BANDS][AR5K_MAX_RATES];
+ enum nl80211_iftype opmode;
+
+#ifdef CONFIG_ATH5K_DEBUG
+ struct ath5k_dbg_info debug; /* debug info */
+#endif /* CONFIG_ATH5K_DEBUG */
+
+ struct ath5k_buf *bufptr; /* allocated buffer ptr */
+ struct ath5k_desc *desc; /* TX/RX descriptors */
+ dma_addr_t desc_daddr; /* DMA (physical) address */
+ size_t desc_len; /* size of TX/RX descriptors */
+
+ DECLARE_BITMAP(status, 4);
+#define ATH_STAT_INVALID 0 /* disable hardware accesses */
+#define ATH_STAT_LEDSOFT 2 /* enable LED gpio status */
+#define ATH_STAT_STARTED 3 /* opened & irqs enabled */
+#define ATH_STAT_RESET 4 /* hw reset */
+
+ unsigned int filter_flags; /* HW flags, AR5K_RX_FILTER_* */
+ unsigned int fif_filter_flags; /* Current FIF_* filter flags */
+ struct ieee80211_channel *curchan; /* current h/w channel */
+
+ u16 nvifs;
+
+ enum ath5k_int imask; /* interrupt mask copy */
+
+ spinlock_t irqlock;
+ bool rx_pending; /* rx tasklet pending */
+ bool tx_pending; /* tx tasklet pending */
+
+ u8 bssidmask[ETH_ALEN];
+
+ unsigned int led_pin, /* GPIO pin for driving LED */
+ led_on; /* pin setting for LED on */
+
+ struct work_struct reset_work; /* deferred chip reset */
+ struct work_struct calib_work; /* deferred phy calibration */
+
+ struct list_head rxbuf; /* receive buffer */
+ spinlock_t rxbuflock;
+ u32 *rxlink; /* link ptr in last RX desc */
+ struct tasklet_struct rxtq; /* rx intr tasklet */
+ struct ath5k_led rx_led; /* rx led */
+
+ struct list_head txbuf; /* transmit buffer */
+ spinlock_t txbuflock;
+ unsigned int txbuf_len; /* buf count in txbuf list */
+ struct ath5k_txq txqs[AR5K_NUM_TX_QUEUES]; /* tx queues */
+ struct tasklet_struct txtq; /* tx intr tasklet */
+ struct ath5k_led tx_led; /* tx led */
+
+ struct ath5k_rfkill rf_kill;
+
+ spinlock_t block; /* protects beacon */
+ struct tasklet_struct beacontq; /* beacon intr tasklet */
+ struct list_head bcbuf; /* beacon buffer */
+ struct ieee80211_vif *bslot[ATH_BCBUF];
+ u16 num_ap_vifs;
+ u16 num_adhoc_vifs;
+ u16 num_mesh_vifs;
+ unsigned int bhalq, /* SW q for outgoing beacons */
+ bmisscount, /* missed beacon transmits */
+ bintval, /* beacon interval in TU */
+ bsent;
+ unsigned int nexttbtt; /* next beacon time in TU */
+ struct ath5k_txq *cabq; /* content after beacon */
+
+ bool assoc; /* associate state */
+ bool enable_beacon; /* true if beacons are on */
+
+ struct ath5k_statistics stats;
+
+ struct ath5k_ani_state ani_state;
+ struct tasklet_struct ani_tasklet; /* ANI calibration */
+
+ struct delayed_work tx_complete_work;
+
+ struct survey_info survey; /* collected survey info */
+
+ enum ath5k_int ah_imr;
+
+ struct ieee80211_channel *ah_current_channel;
+ bool ah_iq_cal_needed;
+ bool ah_single_chip;
+
+ enum ath5k_version ah_version;
+ enum ath5k_radio ah_radio;
+ u32 ah_mac_srev;
+ u16 ah_mac_version;
+ u16 ah_phy_revision;
+ u16 ah_radio_5ghz_revision;
+ u16 ah_radio_2ghz_revision;
+
+#define ah_modes ah_capabilities.cap_mode
+#define ah_ee_version ah_capabilities.cap_eeprom.ee_version
+
+ u8 ah_retry_long;
+ u8 ah_retry_short;
+
+ bool ah_use_32khz_clock;
+
+ u8 ah_coverage_class;
+ bool ah_ack_bitrate_high;
+ u8 ah_bwmode;
+ bool ah_short_slot;
+
+ /* Antenna Control */
+ u32 ah_ant_ctl[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX];
+ u8 ah_ant_mode;
+ u8 ah_tx_ant;
+ u8 ah_def_ant;
+
+ struct ath5k_capabilities ah_capabilities;
+
+ struct ath5k_txq_info ah_txq[AR5K_NUM_TX_QUEUES];
+ u32 ah_txq_status;
+ u32 ah_txq_imr_txok;
+ u32 ah_txq_imr_txerr;
+ u32 ah_txq_imr_txurn;
+ u32 ah_txq_imr_txdesc;
+ u32 ah_txq_imr_txeol;
+ u32 ah_txq_imr_cbrorn;
+ u32 ah_txq_imr_cbrurn;
+ u32 ah_txq_imr_qtrig;
+ u32 ah_txq_imr_nofrm;
+
+ u32 ah_txq_isr_txok_all;
+
+ u32 *ah_rf_banks;
+ size_t ah_rf_banks_size;
+ size_t ah_rf_regs_count;
+ struct ath5k_gain ah_gain;
+ u8 ah_offset[AR5K_MAX_RF_BANKS];
+
+
+ struct {
+ /* Temporary tables used for interpolation */
+ u8 tmpL[AR5K_EEPROM_N_PD_GAINS]
+ [AR5K_EEPROM_POWER_TABLE_SIZE];
+ u8 tmpR[AR5K_EEPROM_N_PD_GAINS]
+ [AR5K_EEPROM_POWER_TABLE_SIZE];
+ u8 txp_pd_table[AR5K_EEPROM_POWER_TABLE_SIZE * 2];
+ u16 txp_rates_power_table[AR5K_MAX_RATES];
+ u8 txp_min_idx;
+ bool txp_tpc;
+ /* Values in 0.25dB units */
+ s16 txp_min_pwr;
+ s16 txp_max_pwr;
+ s16 txp_cur_pwr;
+ /* Values in 0.5dB units */
+ s16 txp_offset;
+ s16 txp_ofdm;
+ s16 txp_cck_ofdm_gainf_delta;
+ /* Value in dB units */
+ s16 txp_cck_ofdm_pwr_delta;
+ bool txp_setup;
+ int txp_requested; /* Requested tx power in dBm */
+ } ah_txpower;
+
+ struct ath5k_nfcal_hist ah_nfcal_hist;
+
+ /* average beacon RSSI in our BSS (used by ANI) */
+ struct ewma_beacon_rssi ah_beacon_rssi_avg;
+
+ /* noise floor from last periodic calibration */
+ s32 ah_noise_floor;
+
+ /* Calibration timestamp */
+ unsigned long ah_cal_next_full;
+ unsigned long ah_cal_next_short;
+ unsigned long ah_cal_next_ani;
+
+ /* Calibration mask */
+ u8 ah_cal_mask;
+
+ /*
+ * Function pointers
+ */
+ int (*ah_setup_tx_desc)(struct ath5k_hw *, struct ath5k_desc *,
+ unsigned int, unsigned int, int, enum ath5k_pkt_type,
+ unsigned int, unsigned int, unsigned int, unsigned int,
+ unsigned int, unsigned int, unsigned int, unsigned int);
+ int (*ah_proc_tx_desc)(struct ath5k_hw *, struct ath5k_desc *,
+ struct ath5k_tx_status *);
+ int (*ah_proc_rx_desc)(struct ath5k_hw *, struct ath5k_desc *,
+ struct ath5k_rx_status *);
+};
+
+struct ath_bus_ops {
+ enum ath_bus_type ath_bus_type;
+ void (*read_cachesize)(struct ath_common *common, int *csz);
+ bool (*eeprom_read)(struct ath_common *common, u32 off, u16 *data);
+ int (*eeprom_read_mac)(struct ath5k_hw *ah, u8 *mac);
+};
+
+/*
+ * Prototypes
+ */
+extern const struct ieee80211_ops ath5k_hw_ops;
+
+/* Initialization and detach functions */
+int ath5k_hw_init(struct ath5k_hw *ah);
+void ath5k_hw_deinit(struct ath5k_hw *ah);
+
+int ath5k_sysfs_register(struct ath5k_hw *ah);
+void ath5k_sysfs_unregister(struct ath5k_hw *ah);
+
+/*Chip id helper functions */
+int ath5k_hw_read_srev(struct ath5k_hw *ah);
+
+/* LED functions */
+int ath5k_init_leds(struct ath5k_hw *ah);
+void ath5k_led_enable(struct ath5k_hw *ah);
+void ath5k_led_off(struct ath5k_hw *ah);
+void ath5k_unregister_leds(struct ath5k_hw *ah);
+
+
+/* Reset Functions */
+int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, struct ieee80211_channel *channel);
+int ath5k_hw_on_hold(struct ath5k_hw *ah);
+int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
+ struct ieee80211_channel *channel, bool fast, bool skip_pcu);
+int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val,
+ bool is_set);
+/* Power management functions */
+
+
+/* Clock rate related functions */
+unsigned int ath5k_hw_htoclock(struct ath5k_hw *ah, unsigned int usec);
+unsigned int ath5k_hw_clocktoh(struct ath5k_hw *ah, unsigned int clock);
+void ath5k_hw_set_clockrate(struct ath5k_hw *ah);
+
+
+/* DMA Related Functions */
+void ath5k_hw_start_rx_dma(struct ath5k_hw *ah);
+u32 ath5k_hw_get_rxdp(struct ath5k_hw *ah);
+int ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr);
+int ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue);
+int ath5k_hw_stop_beacon_queue(struct ath5k_hw *ah, unsigned int queue);
+u32 ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue);
+int ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue,
+ u32 phys_addr);
+int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase);
+/* Interrupt handling */
+bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah);
+int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask);
+enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask);
+void ath5k_hw_update_mib_counters(struct ath5k_hw *ah);
+/* Init/Stop functions */
+void ath5k_hw_dma_init(struct ath5k_hw *ah);
+int ath5k_hw_dma_stop(struct ath5k_hw *ah);
+
+/* EEPROM access functions */
+int ath5k_eeprom_init(struct ath5k_hw *ah);
+void ath5k_eeprom_detach(struct ath5k_hw *ah);
+int ath5k_eeprom_mode_from_channel(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel);
+
+/* Protocol Control Unit Functions */
+/* Helpers */
+int ath5k_hw_get_frame_duration(struct ath5k_hw *ah, enum nl80211_band band,
+ int len, struct ieee80211_rate *rate, bool shortpre);
+unsigned int ath5k_hw_get_default_slottime(struct ath5k_hw *ah);
+unsigned int ath5k_hw_get_default_sifs(struct ath5k_hw *ah);
+int ath5k_hw_set_opmode(struct ath5k_hw *ah, enum nl80211_iftype opmode);
+void ath5k_hw_set_coverage_class(struct ath5k_hw *ah, u8 coverage_class);
+/* RX filter control*/
+int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac);
+void ath5k_hw_set_bssid(struct ath5k_hw *ah);
+void ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask);
+void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1);
+u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah);
+void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter);
+/* Receive (DRU) start/stop functions */
+void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah);
+void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah);
+/* Beacon control functions */
+u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah);
+void ath5k_hw_set_tsf64(struct ath5k_hw *ah, u64 tsf64);
+void ath5k_hw_reset_tsf(struct ath5k_hw *ah);
+void ath5k_hw_init_beacon_timers(struct ath5k_hw *ah, u32 next_beacon,
+ u32 interval);
+bool ath5k_hw_check_beacon_timers(struct ath5k_hw *ah, int intval);
+/* Init function */
+void ath5k_hw_pcu_init(struct ath5k_hw *ah, enum nl80211_iftype op_mode);
+
+/* Queue Control Unit, DFS Control Unit Functions */
+int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue,
+ struct ath5k_txq_info *queue_info);
+int ath5k_hw_set_tx_queueprops(struct ath5k_hw *ah, int queue,
+ const struct ath5k_txq_info *queue_info);
+int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah,
+ enum ath5k_tx_queue queue_type,
+ struct ath5k_txq_info *queue_info);
+void ath5k_hw_set_tx_retry_limits(struct ath5k_hw *ah,
+ unsigned int queue);
+u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue);
+void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue);
+int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue);
+int ath5k_hw_set_ifs_intervals(struct ath5k_hw *ah, unsigned int slot_time);
+/* Init function */
+int ath5k_hw_init_queues(struct ath5k_hw *ah);
+
+/* Hardware Descriptor Functions */
+int ath5k_hw_init_desc_functions(struct ath5k_hw *ah);
+int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
+ u32 size, unsigned int flags);
+int ath5k_hw_setup_mrr_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
+ unsigned int tx_rate1, u_int tx_tries1, u_int tx_rate2,
+ u_int tx_tries2, unsigned int tx_rate3, u_int tx_tries3);
+
+
+/* GPIO Functions */
+void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state);
+int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio);
+int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio);
+u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio);
+int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val);
+void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio,
+ u32 interrupt_level);
+
+
+/* RFkill Functions */
+void ath5k_rfkill_hw_start(struct ath5k_hw *ah);
+void ath5k_rfkill_hw_stop(struct ath5k_hw *ah);
+
+
+/* Misc functions TODO: Cleanup */
+int ath5k_hw_set_capabilities(struct ath5k_hw *ah);
+int ath5k_hw_enable_pspoll(struct ath5k_hw *ah, u8 *bssid, u16 assoc_id);
+int ath5k_hw_disable_pspoll(struct ath5k_hw *ah);
+
+
+/* Initial register settings functions */
+int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel);
+
+
+/* PHY functions */
+/* Misc PHY functions */
+u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, enum nl80211_band band);
+int ath5k_hw_phy_disable(struct ath5k_hw *ah);
+/* Gain_F optimization */
+enum ath5k_rfgain ath5k_hw_gainf_calibrate(struct ath5k_hw *ah);
+int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah);
+/* PHY/RF channel functions */
+bool ath5k_channel_ok(struct ath5k_hw *ah, struct ieee80211_channel *channel);
+/* PHY calibration */
+void ath5k_hw_init_nfcal_hist(struct ath5k_hw *ah);
+int ath5k_hw_phy_calibrate(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel);
+void ath5k_hw_update_noise_floor(struct ath5k_hw *ah);
+/* Spur mitigation */
+bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel);
+/* Antenna control */
+void ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode);
+void ath5k_hw_set_antenna_switch(struct ath5k_hw *ah, u8 ee_mode);
+/* TX power setup */
+int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower);
+/* Init function */
+int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel,
+ u8 mode, bool fast);
+
+/*
+ * Functions used internally
+ */
+
+static inline struct ath_common *ath5k_hw_common(struct ath5k_hw *ah)
+{
+ return &ah->common;
+}
+
+static inline struct ath_regulatory *ath5k_hw_regulatory(struct ath5k_hw *ah)
+{
+ return &(ath5k_hw_common(ah)->regulatory);
+}
+
+#ifdef CONFIG_ATH5K_AHB
+#define AR5K_AR2315_PCI_BASE ((void __iomem *)0xb0100000)
+
+static inline void __iomem *ath5k_ahb_reg(struct ath5k_hw *ah, u16 reg)
+{
+ /* On AR2315 and AR2317 the PCI clock domain registers
+ * are outside of the WMAC register space */
+ if (unlikely((reg >= 0x4000) && (reg < 0x5000) &&
+ (ah->ah_mac_srev >= AR5K_SREV_AR2315_R6)))
+ return AR5K_AR2315_PCI_BASE + reg;
+
+ return ah->iobase + reg;
+}
+
+static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg)
+{
+ return ioread32(ath5k_ahb_reg(ah, reg));
+}
+
+static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg)
+{
+ iowrite32(val, ath5k_ahb_reg(ah, reg));
+}
+
+#else
+
+static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg)
+{
+ return ioread32(ah->iobase + reg);
+}
+
+static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg)
+{
+ iowrite32(val, ah->iobase + reg);
+}
+
+#endif
+
+static inline enum ath_bus_type ath5k_get_bus_type(struct ath5k_hw *ah)
+{
+ return ath5k_hw_common(ah)->bus_ops->ath_bus_type;
+}
+
+static inline void ath5k_read_cachesize(struct ath_common *common, int *csz)
+{
+ common->bus_ops->read_cachesize(common, csz);
+}
+
+static inline bool ath5k_hw_nvram_read(struct ath5k_hw *ah, u32 off, u16 *data)
+{
+ struct ath_common *common = ath5k_hw_common(ah);
+ return common->bus_ops->eeprom_read(common, off, data);
+}
+
+static inline u32 ath5k_hw_bitswap(u32 val, unsigned int bits)
+{
+ u32 retval = 0, bit, i;
+
+ for (i = 0; i < bits; i++) {
+ bit = (val >> i) & 1;
+ retval = (retval << 1) | bit;
+ }
+
+ return retval;
+}
+
+#endif
diff --git a/drivers/net/wireless/ath/ath5k/attach.c b/drivers/net/wireless/ath/ath5k/attach.c
new file mode 100644
index 000000000..12d3a6c92
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/attach.c
@@ -0,0 +1,359 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/*************************************\
+* Attach/Detach Functions and helpers *
+\*************************************/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include "ath5k.h"
+#include "reg.h"
+#include "debug.h"
+
+/**
+ * ath5k_hw_post() - Power On Self Test helper function
+ * @ah: The &struct ath5k_hw
+ */
+static int ath5k_hw_post(struct ath5k_hw *ah)
+{
+
+ static const u32 static_pattern[4] = {
+ 0x55555555, 0xaaaaaaaa,
+ 0x66666666, 0x99999999
+ };
+ static const u16 regs[2] = { AR5K_STA_ID0, AR5K_PHY(8) };
+ int i, c;
+ u16 cur_reg;
+ u32 var_pattern;
+ u32 init_val;
+ u32 cur_val;
+
+ for (c = 0; c < 2; c++) {
+
+ cur_reg = regs[c];
+
+ /* Save previous value */
+ init_val = ath5k_hw_reg_read(ah, cur_reg);
+
+ for (i = 0; i < 256; i++) {
+ var_pattern = i << 16 | i;
+ ath5k_hw_reg_write(ah, var_pattern, cur_reg);
+ cur_val = ath5k_hw_reg_read(ah, cur_reg);
+
+ if (cur_val != var_pattern) {
+ ATH5K_ERR(ah, "POST Failed !!!\n");
+ return -EAGAIN;
+ }
+
+ /* Found on ndiswrapper dumps */
+ var_pattern = 0x0039080f;
+ ath5k_hw_reg_write(ah, var_pattern, cur_reg);
+ }
+
+ for (i = 0; i < 4; i++) {
+ var_pattern = static_pattern[i];
+ ath5k_hw_reg_write(ah, var_pattern, cur_reg);
+ cur_val = ath5k_hw_reg_read(ah, cur_reg);
+
+ if (cur_val != var_pattern) {
+ ATH5K_ERR(ah, "POST Failed !!!\n");
+ return -EAGAIN;
+ }
+
+ /* Found on ndiswrapper dumps */
+ var_pattern = 0x003b080f;
+ ath5k_hw_reg_write(ah, var_pattern, cur_reg);
+ }
+
+ /* Restore previous value */
+ ath5k_hw_reg_write(ah, init_val, cur_reg);
+
+ }
+
+ return 0;
+
+}
+
+/**
+ * ath5k_hw_init() - Check if hw is supported and init the needed structs
+ * @ah: The &struct ath5k_hw associated with the device
+ *
+ * Check if the device is supported, perform a POST and initialize the needed
+ * structs. Returns -ENOMEM if we don't have memory for the needed structs,
+ * -ENODEV if the device is not supported or prints an error msg if something
+ * else went wrong.
+ */
+int ath5k_hw_init(struct ath5k_hw *ah)
+{
+ static const u8 zero_mac[ETH_ALEN] = { };
+ struct ath_common *common = ath5k_hw_common(ah);
+ struct pci_dev *pdev = ah->pdev;
+ struct ath5k_eeprom_info *ee;
+ int ret;
+ u32 srev;
+
+ /*
+ * HW information
+ */
+ ah->ah_bwmode = AR5K_BWMODE_DEFAULT;
+ ah->ah_txpower.txp_tpc = AR5K_TUNE_TPC_TXPOWER;
+ ah->ah_imr = 0;
+ ah->ah_retry_short = AR5K_INIT_RETRY_SHORT;
+ ah->ah_retry_long = AR5K_INIT_RETRY_LONG;
+ ah->ah_ant_mode = AR5K_ANTMODE_DEFAULT;
+ ah->ah_noise_floor = -95; /* until first NF calibration is run */
+ ah->ani_state.ani_mode = ATH5K_ANI_MODE_AUTO;
+ ah->ah_current_channel = &ah->channels[0];
+
+ /*
+ * Find the mac version
+ */
+ ath5k_hw_read_srev(ah);
+ srev = ah->ah_mac_srev;
+ if (srev < AR5K_SREV_AR5311)
+ ah->ah_version = AR5K_AR5210;
+ else if (srev < AR5K_SREV_AR5212)
+ ah->ah_version = AR5K_AR5211;
+ else
+ ah->ah_version = AR5K_AR5212;
+
+ /* Get the MAC version */
+ ah->ah_mac_version = AR5K_REG_MS(srev, AR5K_SREV_VER);
+
+ /* Fill the ath5k_hw struct with the needed functions */
+ ret = ath5k_hw_init_desc_functions(ah);
+ if (ret)
+ goto err;
+
+ /* Bring device out of sleep and reset its units */
+ ret = ath5k_hw_nic_wakeup(ah, NULL);
+ if (ret)
+ goto err;
+
+ /* Get PHY and RADIO revisions */
+ ah->ah_phy_revision = ath5k_hw_reg_read(ah, AR5K_PHY_CHIP_ID) &
+ 0xffffffff;
+ ah->ah_radio_5ghz_revision = ath5k_hw_radio_revision(ah,
+ NL80211_BAND_5GHZ);
+
+ /* Try to identify radio chip based on its srev */
+ switch (ah->ah_radio_5ghz_revision & 0xf0) {
+ case AR5K_SREV_RAD_5111:
+ ah->ah_radio = AR5K_RF5111;
+ ah->ah_single_chip = false;
+ ah->ah_radio_2ghz_revision = ath5k_hw_radio_revision(ah,
+ NL80211_BAND_2GHZ);
+ break;
+ case AR5K_SREV_RAD_5112:
+ case AR5K_SREV_RAD_2112:
+ ah->ah_radio = AR5K_RF5112;
+ ah->ah_single_chip = false;
+ ah->ah_radio_2ghz_revision = ath5k_hw_radio_revision(ah,
+ NL80211_BAND_2GHZ);
+ break;
+ case AR5K_SREV_RAD_2413:
+ ah->ah_radio = AR5K_RF2413;
+ ah->ah_single_chip = true;
+ break;
+ case AR5K_SREV_RAD_5413:
+ ah->ah_radio = AR5K_RF5413;
+ ah->ah_single_chip = true;
+ break;
+ case AR5K_SREV_RAD_2316:
+ ah->ah_radio = AR5K_RF2316;
+ ah->ah_single_chip = true;
+ break;
+ case AR5K_SREV_RAD_2317:
+ ah->ah_radio = AR5K_RF2317;
+ ah->ah_single_chip = true;
+ break;
+ case AR5K_SREV_RAD_5424:
+ if (ah->ah_mac_version == AR5K_SREV_AR2425 ||
+ ah->ah_mac_version == AR5K_SREV_AR2417) {
+ ah->ah_radio = AR5K_RF2425;
+ ah->ah_single_chip = true;
+ } else {
+ ah->ah_radio = AR5K_RF5413;
+ ah->ah_single_chip = true;
+ }
+ break;
+ default:
+ /* Identify radio based on mac/phy srev */
+ if (ah->ah_version == AR5K_AR5210) {
+ ah->ah_radio = AR5K_RF5110;
+ ah->ah_single_chip = false;
+ } else if (ah->ah_version == AR5K_AR5211) {
+ ah->ah_radio = AR5K_RF5111;
+ ah->ah_single_chip = false;
+ ah->ah_radio_2ghz_revision = ath5k_hw_radio_revision(ah,
+ NL80211_BAND_2GHZ);
+ } else if (ah->ah_mac_version == (AR5K_SREV_AR2425 >> 4) ||
+ ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4) ||
+ ah->ah_phy_revision == AR5K_SREV_PHY_2425) {
+ ah->ah_radio = AR5K_RF2425;
+ ah->ah_single_chip = true;
+ ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_2425;
+ } else if (srev == AR5K_SREV_AR5213A &&
+ ah->ah_phy_revision == AR5K_SREV_PHY_5212B) {
+ ah->ah_radio = AR5K_RF5112;
+ ah->ah_single_chip = false;
+ ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_5112B;
+ } else if (ah->ah_mac_version == (AR5K_SREV_AR2415 >> 4) ||
+ ah->ah_mac_version == (AR5K_SREV_AR2315_R6 >> 4)) {
+ ah->ah_radio = AR5K_RF2316;
+ ah->ah_single_chip = true;
+ ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_2316;
+ } else if (ah->ah_mac_version == (AR5K_SREV_AR5414 >> 4) ||
+ ah->ah_phy_revision == AR5K_SREV_PHY_5413) {
+ ah->ah_radio = AR5K_RF5413;
+ ah->ah_single_chip = true;
+ ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_5413;
+ } else if (ah->ah_mac_version == (AR5K_SREV_AR2414 >> 4) ||
+ ah->ah_phy_revision == AR5K_SREV_PHY_2413) {
+ ah->ah_radio = AR5K_RF2413;
+ ah->ah_single_chip = true;
+ ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_2413;
+ } else {
+ ATH5K_ERR(ah, "Couldn't identify radio revision.\n");
+ ret = -ENODEV;
+ goto err;
+ }
+ }
+
+
+ /* Return on unsupported chips (unsupported eeprom etc) */
+ if ((srev >= AR5K_SREV_AR5416) && (srev < AR5K_SREV_AR2425)) {
+ ATH5K_ERR(ah, "Device not yet supported.\n");
+ ret = -ENODEV;
+ goto err;
+ }
+
+ /*
+ * POST
+ */
+ ret = ath5k_hw_post(ah);
+ if (ret)
+ goto err;
+
+ /* Enable pci core retry fix on Hainan (5213A) and later chips */
+ if (srev >= AR5K_SREV_AR5213A)
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_RETRY_FIX);
+
+ /*
+ * Get card capabilities, calibration values etc
+ * TODO: EEPROM work
+ */
+ ret = ath5k_eeprom_init(ah);
+ if (ret) {
+ ATH5K_ERR(ah, "unable to init EEPROM\n");
+ goto err;
+ }
+
+ ee = &ah->ah_capabilities.cap_eeprom;
+
+ /*
+ * Write PCI-E power save settings
+ */
+ if ((ah->ah_version == AR5K_AR5212) && pdev && (pci_is_pcie(pdev))) {
+ ath5k_hw_reg_write(ah, 0x9248fc00, AR5K_PCIE_SERDES);
+ ath5k_hw_reg_write(ah, 0x24924924, AR5K_PCIE_SERDES);
+
+ /* Shut off RX when elecidle is asserted */
+ ath5k_hw_reg_write(ah, 0x28000039, AR5K_PCIE_SERDES);
+ ath5k_hw_reg_write(ah, 0x53160824, AR5K_PCIE_SERDES);
+
+ /* If serdes programming is enabled, increase PCI-E
+ * tx power for systems with long trace from host
+ * to minicard connector. */
+ if (ee->ee_serdes)
+ ath5k_hw_reg_write(ah, 0xe5980579, AR5K_PCIE_SERDES);
+ else
+ ath5k_hw_reg_write(ah, 0xf6800579, AR5K_PCIE_SERDES);
+
+ /* Shut off PLL and CLKREQ active in L1 */
+ ath5k_hw_reg_write(ah, 0x001defff, AR5K_PCIE_SERDES);
+
+ /* Preserve other settings */
+ ath5k_hw_reg_write(ah, 0x1aaabe40, AR5K_PCIE_SERDES);
+ ath5k_hw_reg_write(ah, 0xbe105554, AR5K_PCIE_SERDES);
+ ath5k_hw_reg_write(ah, 0x000e3007, AR5K_PCIE_SERDES);
+
+ /* Reset SERDES to load new settings */
+ ath5k_hw_reg_write(ah, 0x00000000, AR5K_PCIE_SERDES_RESET);
+ usleep_range(1000, 1500);
+ }
+
+ /* Get misc capabilities */
+ ret = ath5k_hw_set_capabilities(ah);
+ if (ret) {
+ ATH5K_ERR(ah, "unable to get device capabilities\n");
+ goto err;
+ }
+
+ /* Crypto settings */
+ common->keymax = (ah->ah_version == AR5K_AR5210 ?
+ AR5K_KEYTABLE_SIZE_5210 : AR5K_KEYTABLE_SIZE_5211);
+
+ if (srev >= AR5K_SREV_AR5212_V4 &&
+ (ee->ee_version < AR5K_EEPROM_VERSION_5_0 ||
+ !AR5K_EEPROM_AES_DIS(ee->ee_misc5)))
+ common->crypt_caps |= ATH_CRYPT_CAP_CIPHER_AESCCM;
+
+ if (srev >= AR5K_SREV_AR2414) {
+ common->crypt_caps |= ATH_CRYPT_CAP_MIC_COMBINED;
+ AR5K_REG_ENABLE_BITS(ah, AR5K_MISC_MODE,
+ AR5K_MISC_MODE_COMBINED_MIC);
+ }
+
+ /* MAC address is cleared until add_interface */
+ ath5k_hw_set_lladdr(ah, zero_mac);
+
+ /* Set BSSID to bcast address: ff:ff:ff:ff:ff:ff for now */
+ eth_broadcast_addr(common->curbssid);
+ ath5k_hw_set_bssid(ah);
+ ath5k_hw_set_opmode(ah, ah->opmode);
+
+ ath5k_hw_rfgain_opt_init(ah);
+
+ ath5k_hw_init_nfcal_hist(ah);
+
+ /* turn on HW LEDs */
+ ath5k_hw_set_ledstate(ah, AR5K_LED_INIT);
+
+ return 0;
+err:
+ return ret;
+}
+
+/**
+ * ath5k_hw_deinit() - Free the &struct ath5k_hw
+ * @ah: The &struct ath5k_hw
+ */
+void ath5k_hw_deinit(struct ath5k_hw *ah)
+{
+ __set_bit(ATH_STAT_INVALID, ah->status);
+
+ kfree(ah->ah_rf_banks);
+
+ ath5k_eeprom_detach(ah);
+
+ /* assume interrupts are down */
+}
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
new file mode 100644
index 000000000..c59c14483
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -0,0 +1,3248 @@
+/*-
+ * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting
+ * Copyright (c) 2004-2005 Atheros Communications, Inc.
+ * Copyright (c) 2006 Devicescape Software, Inc.
+ * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com>
+ * Copyright (c) 2007 Luis R. Rodriguez <mcgrof@winlab.rutgers.edu>
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
+ * redistribution must be conditioned upon including a substantially
+ * similar Disclaimer requirement for further binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
+ * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
+ * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
+ * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ * THE POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/hardirq.h>
+#include <linux/if.h>
+#include <linux/io.h>
+#include <linux/netdevice.h>
+#include <linux/cache.h>
+#include <linux/ethtool.h>
+#include <linux/uaccess.h>
+#include <linux/slab.h>
+#include <linux/etherdevice.h>
+#include <linux/nl80211.h>
+
+#include <net/cfg80211.h>
+#include <net/ieee80211_radiotap.h>
+
+#include <asm/unaligned.h>
+
+#include <net/mac80211.h>
+#include "base.h"
+#include "reg.h"
+#include "debug.h"
+#include "ani.h"
+#include "ath5k.h"
+#include "../regd.h"
+
+#define CREATE_TRACE_POINTS
+#include "trace.h"
+
+bool ath5k_modparam_nohwcrypt;
+module_param_named(nohwcrypt, ath5k_modparam_nohwcrypt, bool, 0444);
+MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
+
+static bool modparam_fastchanswitch;
+module_param_named(fastchanswitch, modparam_fastchanswitch, bool, 0444);
+MODULE_PARM_DESC(fastchanswitch, "Enable fast channel switching for AR2413/AR5413 radios.");
+
+static bool ath5k_modparam_no_hw_rfkill_switch;
+module_param_named(no_hw_rfkill_switch, ath5k_modparam_no_hw_rfkill_switch,
+ bool, 0444);
+MODULE_PARM_DESC(no_hw_rfkill_switch, "Ignore the GPIO RFKill switch state");
+
+
+/* Module info */
+MODULE_AUTHOR("Jiri Slaby");
+MODULE_AUTHOR("Nick Kossifidis");
+MODULE_DESCRIPTION("Support for 5xxx series of Atheros 802.11 wireless LAN cards.");
+MODULE_LICENSE("Dual BSD/GPL");
+
+static int ath5k_init(struct ieee80211_hw *hw);
+static int ath5k_reset(struct ath5k_hw *ah, struct ieee80211_channel *chan,
+ bool skip_pcu);
+
+/* Known SREVs */
+static const struct ath5k_srev_name srev_names[] = {
+#ifdef CONFIG_ATH5K_AHB
+ { "5312", AR5K_VERSION_MAC, AR5K_SREV_AR5312_R2 },
+ { "5312", AR5K_VERSION_MAC, AR5K_SREV_AR5312_R7 },
+ { "2313", AR5K_VERSION_MAC, AR5K_SREV_AR2313_R8 },
+ { "2315", AR5K_VERSION_MAC, AR5K_SREV_AR2315_R6 },
+ { "2315", AR5K_VERSION_MAC, AR5K_SREV_AR2315_R7 },
+ { "2317", AR5K_VERSION_MAC, AR5K_SREV_AR2317_R1 },
+ { "2317", AR5K_VERSION_MAC, AR5K_SREV_AR2317_R2 },
+#else
+ { "5210", AR5K_VERSION_MAC, AR5K_SREV_AR5210 },
+ { "5311", AR5K_VERSION_MAC, AR5K_SREV_AR5311 },
+ { "5311A", AR5K_VERSION_MAC, AR5K_SREV_AR5311A },
+ { "5311B", AR5K_VERSION_MAC, AR5K_SREV_AR5311B },
+ { "5211", AR5K_VERSION_MAC, AR5K_SREV_AR5211 },
+ { "5212", AR5K_VERSION_MAC, AR5K_SREV_AR5212 },
+ { "5213", AR5K_VERSION_MAC, AR5K_SREV_AR5213 },
+ { "5213A", AR5K_VERSION_MAC, AR5K_SREV_AR5213A },
+ { "2413", AR5K_VERSION_MAC, AR5K_SREV_AR2413 },
+ { "2414", AR5K_VERSION_MAC, AR5K_SREV_AR2414 },
+ { "5424", AR5K_VERSION_MAC, AR5K_SREV_AR5424 },
+ { "5413", AR5K_VERSION_MAC, AR5K_SREV_AR5413 },
+ { "5414", AR5K_VERSION_MAC, AR5K_SREV_AR5414 },
+ { "2415", AR5K_VERSION_MAC, AR5K_SREV_AR2415 },
+ { "5416", AR5K_VERSION_MAC, AR5K_SREV_AR5416 },
+ { "5418", AR5K_VERSION_MAC, AR5K_SREV_AR5418 },
+ { "2425", AR5K_VERSION_MAC, AR5K_SREV_AR2425 },
+ { "2417", AR5K_VERSION_MAC, AR5K_SREV_AR2417 },
+#endif
+ { "xxxxx", AR5K_VERSION_MAC, AR5K_SREV_UNKNOWN },
+ { "5110", AR5K_VERSION_RAD, AR5K_SREV_RAD_5110 },
+ { "5111", AR5K_VERSION_RAD, AR5K_SREV_RAD_5111 },
+ { "5111A", AR5K_VERSION_RAD, AR5K_SREV_RAD_5111A },
+ { "2111", AR5K_VERSION_RAD, AR5K_SREV_RAD_2111 },
+ { "5112", AR5K_VERSION_RAD, AR5K_SREV_RAD_5112 },
+ { "5112A", AR5K_VERSION_RAD, AR5K_SREV_RAD_5112A },
+ { "5112B", AR5K_VERSION_RAD, AR5K_SREV_RAD_5112B },
+ { "2112", AR5K_VERSION_RAD, AR5K_SREV_RAD_2112 },
+ { "2112A", AR5K_VERSION_RAD, AR5K_SREV_RAD_2112A },
+ { "2112B", AR5K_VERSION_RAD, AR5K_SREV_RAD_2112B },
+ { "2413", AR5K_VERSION_RAD, AR5K_SREV_RAD_2413 },
+ { "5413", AR5K_VERSION_RAD, AR5K_SREV_RAD_5413 },
+ { "5424", AR5K_VERSION_RAD, AR5K_SREV_RAD_5424 },
+ { "5133", AR5K_VERSION_RAD, AR5K_SREV_RAD_5133 },
+#ifdef CONFIG_ATH5K_AHB
+ { "2316", AR5K_VERSION_RAD, AR5K_SREV_RAD_2316 },
+ { "2317", AR5K_VERSION_RAD, AR5K_SREV_RAD_2317 },
+#endif
+ { "xxxxx", AR5K_VERSION_RAD, AR5K_SREV_UNKNOWN },
+};
+
+static const struct ieee80211_rate ath5k_rates[] = {
+ { .bitrate = 10,
+ .hw_value = ATH5K_RATE_CODE_1M, },
+ { .bitrate = 20,
+ .hw_value = ATH5K_RATE_CODE_2M,
+ .hw_value_short = ATH5K_RATE_CODE_2M | AR5K_SET_SHORT_PREAMBLE,
+ .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+ { .bitrate = 55,
+ .hw_value = ATH5K_RATE_CODE_5_5M,
+ .hw_value_short = ATH5K_RATE_CODE_5_5M | AR5K_SET_SHORT_PREAMBLE,
+ .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+ { .bitrate = 110,
+ .hw_value = ATH5K_RATE_CODE_11M,
+ .hw_value_short = ATH5K_RATE_CODE_11M | AR5K_SET_SHORT_PREAMBLE,
+ .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+ { .bitrate = 60,
+ .hw_value = ATH5K_RATE_CODE_6M,
+ .flags = IEEE80211_RATE_SUPPORTS_5MHZ |
+ IEEE80211_RATE_SUPPORTS_10MHZ },
+ { .bitrate = 90,
+ .hw_value = ATH5K_RATE_CODE_9M,
+ .flags = IEEE80211_RATE_SUPPORTS_5MHZ |
+ IEEE80211_RATE_SUPPORTS_10MHZ },
+ { .bitrate = 120,
+ .hw_value = ATH5K_RATE_CODE_12M,
+ .flags = IEEE80211_RATE_SUPPORTS_5MHZ |
+ IEEE80211_RATE_SUPPORTS_10MHZ },
+ { .bitrate = 180,
+ .hw_value = ATH5K_RATE_CODE_18M,
+ .flags = IEEE80211_RATE_SUPPORTS_5MHZ |
+ IEEE80211_RATE_SUPPORTS_10MHZ },
+ { .bitrate = 240,
+ .hw_value = ATH5K_RATE_CODE_24M,
+ .flags = IEEE80211_RATE_SUPPORTS_5MHZ |
+ IEEE80211_RATE_SUPPORTS_10MHZ },
+ { .bitrate = 360,
+ .hw_value = ATH5K_RATE_CODE_36M,
+ .flags = IEEE80211_RATE_SUPPORTS_5MHZ |
+ IEEE80211_RATE_SUPPORTS_10MHZ },
+ { .bitrate = 480,
+ .hw_value = ATH5K_RATE_CODE_48M,
+ .flags = IEEE80211_RATE_SUPPORTS_5MHZ |
+ IEEE80211_RATE_SUPPORTS_10MHZ },
+ { .bitrate = 540,
+ .hw_value = ATH5K_RATE_CODE_54M,
+ .flags = IEEE80211_RATE_SUPPORTS_5MHZ |
+ IEEE80211_RATE_SUPPORTS_10MHZ },
+};
+
+static inline u64 ath5k_extend_tsf(struct ath5k_hw *ah, u32 rstamp)
+{
+ u64 tsf = ath5k_hw_get_tsf64(ah);
+
+ if ((tsf & 0x7fff) < rstamp)
+ tsf -= 0x8000;
+
+ return (tsf & ~0x7fff) | rstamp;
+}
+
+const char *
+ath5k_chip_name(enum ath5k_srev_type type, u_int16_t val)
+{
+ const char *name = "xxxxx";
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(srev_names); i++) {
+ if (srev_names[i].sr_type != type)
+ continue;
+
+ if ((val & 0xf0) == srev_names[i].sr_val)
+ name = srev_names[i].sr_name;
+
+ if ((val & 0xff) == srev_names[i].sr_val) {
+ name = srev_names[i].sr_name;
+ break;
+ }
+ }
+
+ return name;
+}
+static unsigned int ath5k_ioread32(void *hw_priv, u32 reg_offset)
+{
+ struct ath5k_hw *ah = (struct ath5k_hw *) hw_priv;
+ return ath5k_hw_reg_read(ah, reg_offset);
+}
+
+static void ath5k_iowrite32(void *hw_priv, u32 val, u32 reg_offset)
+{
+ struct ath5k_hw *ah = (struct ath5k_hw *) hw_priv;
+ ath5k_hw_reg_write(ah, val, reg_offset);
+}
+
+static const struct ath_ops ath5k_common_ops = {
+ .read = ath5k_ioread32,
+ .write = ath5k_iowrite32,
+};
+
+/***********************\
+* Driver Initialization *
+\***********************/
+
+static void ath5k_reg_notifier(struct wiphy *wiphy,
+ struct regulatory_request *request)
+{
+ struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
+ struct ath5k_hw *ah = hw->priv;
+ struct ath_regulatory *regulatory = ath5k_hw_regulatory(ah);
+
+ ath_reg_notifier_apply(wiphy, request, regulatory);
+}
+
+/********************\
+* Channel/mode setup *
+\********************/
+
+/*
+ * Returns true for the channel numbers used.
+ */
+#ifdef CONFIG_ATH5K_TEST_CHANNELS
+static bool ath5k_is_standard_channel(short chan, enum nl80211_band band)
+{
+ return true;
+}
+
+#else
+static bool ath5k_is_standard_channel(short chan, enum nl80211_band band)
+{
+ if (band == NL80211_BAND_2GHZ && chan <= 14)
+ return true;
+
+ return /* UNII 1,2 */
+ (((chan & 3) == 0 && chan >= 36 && chan <= 64) ||
+ /* midband */
+ ((chan & 3) == 0 && chan >= 100 && chan <= 140) ||
+ /* UNII-3 */
+ ((chan & 3) == 1 && chan >= 149 && chan <= 165) ||
+ /* 802.11j 5.030-5.080 GHz (20MHz) */
+ (chan == 8 || chan == 12 || chan == 16) ||
+ /* 802.11j 4.9GHz (20MHz) */
+ (chan == 184 || chan == 188 || chan == 192 || chan == 196));
+}
+#endif
+
+static unsigned int
+ath5k_setup_channels(struct ath5k_hw *ah, struct ieee80211_channel *channels,
+ unsigned int mode, unsigned int max)
+{
+ unsigned int count, size, freq, ch;
+ enum nl80211_band band;
+
+ switch (mode) {
+ case AR5K_MODE_11A:
+ /* 1..220, but 2GHz frequencies are filtered by check_channel */
+ size = 220;
+ band = NL80211_BAND_5GHZ;
+ break;
+ case AR5K_MODE_11B:
+ case AR5K_MODE_11G:
+ size = 26;
+ band = NL80211_BAND_2GHZ;
+ break;
+ default:
+ ATH5K_WARN(ah, "bad mode, not copying channels\n");
+ return 0;
+ }
+
+ count = 0;
+ for (ch = 1; ch <= size && count < max; ch++) {
+ freq = ieee80211_channel_to_frequency(ch, band);
+
+ if (freq == 0) /* mapping failed - not a standard channel */
+ continue;
+
+ /* Write channel info, needed for ath5k_channel_ok() */
+ channels[count].center_freq = freq;
+ channels[count].band = band;
+ channels[count].hw_value = mode;
+
+ /* Check if channel is supported by the chipset */
+ if (!ath5k_channel_ok(ah, &channels[count]))
+ continue;
+
+ if (!ath5k_is_standard_channel(ch, band))
+ continue;
+
+ count++;
+ }
+
+ return count;
+}
+
+static void
+ath5k_setup_rate_idx(struct ath5k_hw *ah, struct ieee80211_supported_band *b)
+{
+ u8 i;
+
+ for (i = 0; i < AR5K_MAX_RATES; i++)
+ ah->rate_idx[b->band][i] = -1;
+
+ for (i = 0; i < b->n_bitrates; i++) {
+ ah->rate_idx[b->band][b->bitrates[i].hw_value] = i;
+ if (b->bitrates[i].hw_value_short)
+ ah->rate_idx[b->band][b->bitrates[i].hw_value_short] = i;
+ }
+}
+
+static int
+ath5k_setup_bands(struct ieee80211_hw *hw)
+{
+ struct ath5k_hw *ah = hw->priv;
+ struct ieee80211_supported_band *sband;
+ int max_c, count_c = 0;
+ int i;
+
+ BUILD_BUG_ON(ARRAY_SIZE(ah->sbands) < NUM_NL80211_BANDS);
+ max_c = ARRAY_SIZE(ah->channels);
+
+ /* 2GHz band */
+ sband = &ah->sbands[NL80211_BAND_2GHZ];
+ sband->band = NL80211_BAND_2GHZ;
+ sband->bitrates = &ah->rates[NL80211_BAND_2GHZ][0];
+
+ if (test_bit(AR5K_MODE_11G, ah->ah_capabilities.cap_mode)) {
+ /* G mode */
+ memcpy(sband->bitrates, &ath5k_rates[0],
+ sizeof(struct ieee80211_rate) * 12);
+ sband->n_bitrates = 12;
+
+ sband->channels = ah->channels;
+ sband->n_channels = ath5k_setup_channels(ah, sband->channels,
+ AR5K_MODE_11G, max_c);
+
+ hw->wiphy->bands[NL80211_BAND_2GHZ] = sband;
+ count_c = sband->n_channels;
+ max_c -= count_c;
+ } else if (test_bit(AR5K_MODE_11B, ah->ah_capabilities.cap_mode)) {
+ /* B mode */
+ memcpy(sband->bitrates, &ath5k_rates[0],
+ sizeof(struct ieee80211_rate) * 4);
+ sband->n_bitrates = 4;
+
+ /* 5211 only supports B rates and uses 4bit rate codes
+ * (e.g normally we have 0x1B for 1M, but on 5211 we have 0x0B)
+ * fix them up here:
+ */
+ if (ah->ah_version == AR5K_AR5211) {
+ for (i = 0; i < 4; i++) {
+ sband->bitrates[i].hw_value =
+ sband->bitrates[i].hw_value & 0xF;
+ sband->bitrates[i].hw_value_short =
+ sband->bitrates[i].hw_value_short & 0xF;
+ }
+ }
+
+ sband->channels = ah->channels;
+ sband->n_channels = ath5k_setup_channels(ah, sband->channels,
+ AR5K_MODE_11B, max_c);
+
+ hw->wiphy->bands[NL80211_BAND_2GHZ] = sband;
+ count_c = sband->n_channels;
+ max_c -= count_c;
+ }
+ ath5k_setup_rate_idx(ah, sband);
+
+ /* 5GHz band, A mode */
+ if (test_bit(AR5K_MODE_11A, ah->ah_capabilities.cap_mode)) {
+ sband = &ah->sbands[NL80211_BAND_5GHZ];
+ sband->band = NL80211_BAND_5GHZ;
+ sband->bitrates = &ah->rates[NL80211_BAND_5GHZ][0];
+
+ memcpy(sband->bitrates, &ath5k_rates[4],
+ sizeof(struct ieee80211_rate) * 8);
+ sband->n_bitrates = 8;
+
+ sband->channels = &ah->channels[count_c];
+ sband->n_channels = ath5k_setup_channels(ah, sband->channels,
+ AR5K_MODE_11A, max_c);
+
+ hw->wiphy->bands[NL80211_BAND_5GHZ] = sband;
+ }
+ ath5k_setup_rate_idx(ah, sband);
+
+ ath5k_debug_dump_bands(ah);
+
+ return 0;
+}
+
+/*
+ * Set/change channels. We always reset the chip.
+ * To accomplish this we must first cleanup any pending DMA,
+ * then restart stuff after a la ath5k_init.
+ *
+ * Called with ah->lock.
+ */
+int
+ath5k_chan_set(struct ath5k_hw *ah, struct cfg80211_chan_def *chandef)
+{
+ ATH5K_DBG(ah, ATH5K_DEBUG_RESET,
+ "channel set, resetting (%u -> %u MHz)\n",
+ ah->curchan->center_freq, chandef->chan->center_freq);
+
+ switch (chandef->width) {
+ case NL80211_CHAN_WIDTH_20:
+ case NL80211_CHAN_WIDTH_20_NOHT:
+ ah->ah_bwmode = AR5K_BWMODE_DEFAULT;
+ break;
+ case NL80211_CHAN_WIDTH_5:
+ ah->ah_bwmode = AR5K_BWMODE_5MHZ;
+ break;
+ case NL80211_CHAN_WIDTH_10:
+ ah->ah_bwmode = AR5K_BWMODE_10MHZ;
+ break;
+ default:
+ WARN_ON(1);
+ return -EINVAL;
+ }
+
+ /*
+ * To switch channels clear any pending DMA operations;
+ * wait long enough for the RX fifo to drain, reset the
+ * hardware at the new frequency, and then re-enable
+ * the relevant bits of the h/w.
+ */
+ return ath5k_reset(ah, chandef->chan, true);
+}
+
+void ath5k_vif_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
+{
+ struct ath5k_vif_iter_data *iter_data = data;
+ int i;
+ struct ath5k_vif *avf = (void *)vif->drv_priv;
+
+ if (iter_data->hw_macaddr)
+ for (i = 0; i < ETH_ALEN; i++)
+ iter_data->mask[i] &=
+ ~(iter_data->hw_macaddr[i] ^ mac[i]);
+
+ if (!iter_data->found_active) {
+ iter_data->found_active = true;
+ memcpy(iter_data->active_mac, mac, ETH_ALEN);
+ }
+
+ if (iter_data->need_set_hw_addr && iter_data->hw_macaddr)
+ if (ether_addr_equal(iter_data->hw_macaddr, mac))
+ iter_data->need_set_hw_addr = false;
+
+ if (!iter_data->any_assoc) {
+ if (avf->assoc)
+ iter_data->any_assoc = true;
+ }
+
+ /* Calculate combined mode - when APs are active, operate in AP mode.
+ * Otherwise use the mode of the new interface. This can currently
+ * only deal with combinations of APs and STAs. Only one ad-hoc
+ * interfaces is allowed.
+ */
+ if (avf->opmode == NL80211_IFTYPE_AP)
+ iter_data->opmode = NL80211_IFTYPE_AP;
+ else {
+ if (avf->opmode == NL80211_IFTYPE_STATION)
+ iter_data->n_stas++;
+ if (iter_data->opmode == NL80211_IFTYPE_UNSPECIFIED)
+ iter_data->opmode = avf->opmode;
+ }
+}
+
+void
+ath5k_update_bssid_mask_and_opmode(struct ath5k_hw *ah,
+ struct ieee80211_vif *vif)
+{
+ struct ath_common *common = ath5k_hw_common(ah);
+ struct ath5k_vif_iter_data iter_data;
+ u32 rfilt;
+
+ /*
+ * Use the hardware MAC address as reference, the hardware uses it
+ * together with the BSSID mask when matching addresses.
+ */
+ iter_data.hw_macaddr = common->macaddr;
+ eth_broadcast_addr(iter_data.mask);
+ iter_data.found_active = false;
+ iter_data.need_set_hw_addr = true;
+ iter_data.opmode = NL80211_IFTYPE_UNSPECIFIED;
+ iter_data.n_stas = 0;
+
+ if (vif)
+ ath5k_vif_iter(&iter_data, vif->addr, vif);
+
+ /* Get list of all active MAC addresses */
+ ieee80211_iterate_active_interfaces_atomic(
+ ah->hw, IEEE80211_IFACE_ITER_RESUME_ALL,
+ ath5k_vif_iter, &iter_data);
+ memcpy(ah->bssidmask, iter_data.mask, ETH_ALEN);
+
+ ah->opmode = iter_data.opmode;
+ if (ah->opmode == NL80211_IFTYPE_UNSPECIFIED)
+ /* Nothing active, default to station mode */
+ ah->opmode = NL80211_IFTYPE_STATION;
+
+ ath5k_hw_set_opmode(ah, ah->opmode);
+ ATH5K_DBG(ah, ATH5K_DEBUG_MODE, "mode setup opmode %d (%s)\n",
+ ah->opmode, ath_opmode_to_string(ah->opmode));
+
+ if (iter_data.need_set_hw_addr && iter_data.found_active)
+ ath5k_hw_set_lladdr(ah, iter_data.active_mac);
+
+ if (ath5k_hw_hasbssidmask(ah))
+ ath5k_hw_set_bssid_mask(ah, ah->bssidmask);
+
+ /* Set up RX Filter */
+ if (iter_data.n_stas > 1) {
+ /* If you have multiple STA interfaces connected to
+ * different APs, ARPs are not received (most of the time?)
+ * Enabling PROMISC appears to fix that problem.
+ */
+ ah->filter_flags |= AR5K_RX_FILTER_PROM;
+ }
+
+ rfilt = ah->filter_flags;
+ ath5k_hw_set_rx_filter(ah, rfilt);
+ ATH5K_DBG(ah, ATH5K_DEBUG_MODE, "RX filter 0x%x\n", rfilt);
+}
+
+static inline int
+ath5k_hw_to_driver_rix(struct ath5k_hw *ah, int hw_rix)
+{
+ int rix;
+
+ /* return base rate on errors */
+ if (WARN(hw_rix < 0 || hw_rix >= AR5K_MAX_RATES,
+ "hw_rix out of bounds: %x\n", hw_rix))
+ return 0;
+
+ rix = ah->rate_idx[ah->curchan->band][hw_rix];
+ if (WARN(rix < 0, "invalid hw_rix: %x\n", hw_rix))
+ rix = 0;
+
+ return rix;
+}
+
+/***************\
+* Buffers setup *
+\***************/
+
+static
+struct sk_buff *ath5k_rx_skb_alloc(struct ath5k_hw *ah, dma_addr_t *skb_addr)
+{
+ struct ath_common *common = ath5k_hw_common(ah);
+ struct sk_buff *skb;
+
+ /*
+ * Allocate buffer with headroom_needed space for the
+ * fake physical layer header at the start.
+ */
+ skb = ath_rxbuf_alloc(common,
+ common->rx_bufsize,
+ GFP_ATOMIC);
+
+ if (!skb) {
+ ATH5K_ERR(ah, "can't alloc skbuff of size %u\n",
+ common->rx_bufsize);
+ return NULL;
+ }
+
+ *skb_addr = dma_map_single(ah->dev,
+ skb->data, common->rx_bufsize,
+ DMA_FROM_DEVICE);
+
+ if (unlikely(dma_mapping_error(ah->dev, *skb_addr))) {
+ ATH5K_ERR(ah, "%s: DMA mapping failed\n", __func__);
+ dev_kfree_skb(skb);
+ return NULL;
+ }
+ return skb;
+}
+
+static int
+ath5k_rxbuf_setup(struct ath5k_hw *ah, struct ath5k_buf *bf)
+{
+ struct sk_buff *skb = bf->skb;
+ struct ath5k_desc *ds;
+ int ret;
+
+ if (!skb) {
+ skb = ath5k_rx_skb_alloc(ah, &bf->skbaddr);
+ if (!skb)
+ return -ENOMEM;
+ bf->skb = skb;
+ }
+
+ /*
+ * Setup descriptors. For receive we always terminate
+ * the descriptor list with a self-linked entry so we'll
+ * not get overrun under high load (as can happen with a
+ * 5212 when ANI processing enables PHY error frames).
+ *
+ * To ensure the last descriptor is self-linked we create
+ * each descriptor as self-linked and add it to the end. As
+ * each additional descriptor is added the previous self-linked
+ * entry is "fixed" naturally. This should be safe even
+ * if DMA is happening. When processing RX interrupts we
+ * never remove/process the last, self-linked, entry on the
+ * descriptor list. This ensures the hardware always has
+ * someplace to write a new frame.
+ */
+ ds = bf->desc;
+ ds->ds_link = bf->daddr; /* link to self */
+ ds->ds_data = bf->skbaddr;
+ ret = ath5k_hw_setup_rx_desc(ah, ds, ah->common.rx_bufsize, 0);
+ if (ret) {
+ ATH5K_ERR(ah, "%s: could not setup RX desc\n", __func__);
+ return ret;
+ }
+
+ if (ah->rxlink != NULL)
+ *ah->rxlink = bf->daddr;
+ ah->rxlink = &ds->ds_link;
+ return 0;
+}
+
+static enum ath5k_pkt_type get_hw_packet_type(struct sk_buff *skb)
+{
+ struct ieee80211_hdr *hdr;
+ enum ath5k_pkt_type htype;
+ __le16 fc;
+
+ hdr = (struct ieee80211_hdr *)skb->data;
+ fc = hdr->frame_control;
+
+ if (ieee80211_is_beacon(fc))
+ htype = AR5K_PKT_TYPE_BEACON;
+ else if (ieee80211_is_probe_resp(fc))
+ htype = AR5K_PKT_TYPE_PROBE_RESP;
+ else if (ieee80211_is_atim(fc))
+ htype = AR5K_PKT_TYPE_ATIM;
+ else if (ieee80211_is_pspoll(fc))
+ htype = AR5K_PKT_TYPE_PSPOLL;
+ else
+ htype = AR5K_PKT_TYPE_NORMAL;
+
+ return htype;
+}
+
+static struct ieee80211_rate *
+ath5k_get_rate(const struct ieee80211_hw *hw,
+ const struct ieee80211_tx_info *info,
+ struct ath5k_buf *bf, int idx)
+{
+ /*
+ * convert a ieee80211_tx_rate RC-table entry to
+ * the respective ieee80211_rate struct
+ */
+ if (bf->rates[idx].idx < 0) {
+ return NULL;
+ }
+
+ return &hw->wiphy->bands[info->band]->bitrates[ bf->rates[idx].idx ];
+}
+
+static u16
+ath5k_get_rate_hw_value(const struct ieee80211_hw *hw,
+ const struct ieee80211_tx_info *info,
+ struct ath5k_buf *bf, int idx)
+{
+ struct ieee80211_rate *rate;
+ u16 hw_rate;
+ u8 rc_flags;
+
+ rate = ath5k_get_rate(hw, info, bf, idx);
+ if (!rate)
+ return 0;
+
+ rc_flags = bf->rates[idx].flags;
+ hw_rate = (rc_flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) ?
+ rate->hw_value_short : rate->hw_value;
+
+ return hw_rate;
+}
+
+static bool ath5k_merge_ratetbl(struct ieee80211_sta *sta,
+ struct ath5k_buf *bf,
+ struct ieee80211_tx_info *tx_info)
+{
+ struct ieee80211_sta_rates *ratetbl;
+ u8 i;
+
+ if (!sta)
+ return false;
+
+ ratetbl = rcu_dereference(sta->rates);
+ if (!ratetbl)
+ return false;
+
+ if (tx_info->control.rates[0].idx < 0 ||
+ tx_info->control.rates[0].count == 0)
+ {
+ i = 0;
+ } else {
+ bf->rates[0] = tx_info->control.rates[0];
+ i = 1;
+ }
+
+ for ( ; i < IEEE80211_TX_MAX_RATES; i++) {
+ bf->rates[i].idx = ratetbl->rate[i].idx;
+ bf->rates[i].flags = ratetbl->rate[i].flags;
+ if (tx_info->control.use_rts)
+ bf->rates[i].count = ratetbl->rate[i].count_rts;
+ else if (tx_info->control.use_cts_prot)
+ bf->rates[i].count = ratetbl->rate[i].count_cts;
+ else
+ bf->rates[i].count = ratetbl->rate[i].count;
+ }
+
+ return true;
+}
+
+static int
+ath5k_txbuf_setup(struct ath5k_hw *ah, struct ath5k_buf *bf,
+ struct ath5k_txq *txq, int padsize,
+ struct ieee80211_tx_control *control)
+{
+ struct ath5k_desc *ds = bf->desc;
+ struct sk_buff *skb = bf->skb;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ unsigned int pktlen, flags, keyidx = AR5K_TXKEYIX_INVALID;
+ struct ieee80211_rate *rate;
+ struct ieee80211_sta *sta;
+ unsigned int mrr_rate[3], mrr_tries[3];
+ int i, ret;
+ u16 hw_rate;
+ u16 cts_rate = 0;
+ u16 duration = 0;
+ u8 rc_flags;
+
+ flags = AR5K_TXDESC_INTREQ | AR5K_TXDESC_CLRDMASK;
+
+ /* XXX endianness */
+ bf->skbaddr = dma_map_single(ah->dev, skb->data, skb->len,
+ DMA_TO_DEVICE);
+
+ if (dma_mapping_error(ah->dev, bf->skbaddr))
+ return -ENOSPC;
+
+ if (control)
+ sta = control->sta;
+ else
+ sta = NULL;
+
+ if (!ath5k_merge_ratetbl(sta, bf, info)) {
+ ieee80211_get_tx_rates(info->control.vif,
+ sta, skb, bf->rates,
+ ARRAY_SIZE(bf->rates));
+ }
+
+ rate = ath5k_get_rate(ah->hw, info, bf, 0);
+
+ if (!rate) {
+ ret = -EINVAL;
+ goto err_unmap;
+ }
+
+ if (info->flags & IEEE80211_TX_CTL_NO_ACK)
+ flags |= AR5K_TXDESC_NOACK;
+
+ rc_flags = bf->rates[0].flags;
+
+ hw_rate = ath5k_get_rate_hw_value(ah->hw, info, bf, 0);
+
+ pktlen = skb->len;
+
+ /* FIXME: If we are in g mode and rate is a CCK rate
+ * subtract ah->ah_txpower.txp_cck_ofdm_pwr_delta
+ * from tx power (value is in dB units already) */
+ if (info->control.hw_key) {
+ keyidx = info->control.hw_key->hw_key_idx;
+ pktlen += info->control.hw_key->icv_len;
+ }
+ if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) {
+ flags |= AR5K_TXDESC_RTSENA;
+ cts_rate = ieee80211_get_rts_cts_rate(ah->hw, info)->hw_value;
+ duration = le16_to_cpu(ieee80211_rts_duration(ah->hw,
+ info->control.vif, pktlen, info));
+ }
+ if (rc_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
+ flags |= AR5K_TXDESC_CTSENA;
+ cts_rate = ieee80211_get_rts_cts_rate(ah->hw, info)->hw_value;
+ duration = le16_to_cpu(ieee80211_ctstoself_duration(ah->hw,
+ info->control.vif, pktlen, info));
+ }
+
+ ret = ah->ah_setup_tx_desc(ah, ds, pktlen,
+ ieee80211_get_hdrlen_from_skb(skb), padsize,
+ get_hw_packet_type(skb),
+ (ah->ah_txpower.txp_requested * 2),
+ hw_rate,
+ bf->rates[0].count, keyidx, ah->ah_tx_ant, flags,
+ cts_rate, duration);
+ if (ret)
+ goto err_unmap;
+
+ /* Set up MRR descriptor */
+ if (ah->ah_capabilities.cap_has_mrr_support) {
+ memset(mrr_rate, 0, sizeof(mrr_rate));
+ memset(mrr_tries, 0, sizeof(mrr_tries));
+
+ for (i = 0; i < 3; i++) {
+
+ rate = ath5k_get_rate(ah->hw, info, bf, i);
+ if (!rate)
+ break;
+
+ mrr_rate[i] = ath5k_get_rate_hw_value(ah->hw, info, bf, i);
+ mrr_tries[i] = bf->rates[i].count;
+ }
+
+ ath5k_hw_setup_mrr_tx_desc(ah, ds,
+ mrr_rate[0], mrr_tries[0],
+ mrr_rate[1], mrr_tries[1],
+ mrr_rate[2], mrr_tries[2]);
+ }
+
+ ds->ds_link = 0;
+ ds->ds_data = bf->skbaddr;
+
+ spin_lock_bh(&txq->lock);
+ list_add_tail(&bf->list, &txq->q);
+ txq->txq_len++;
+ if (txq->link == NULL) /* is this first packet? */
+ ath5k_hw_set_txdp(ah, txq->qnum, bf->daddr);
+ else /* no, so only link it */
+ *txq->link = bf->daddr;
+
+ txq->link = &ds->ds_link;
+ ath5k_hw_start_tx_dma(ah, txq->qnum);
+ spin_unlock_bh(&txq->lock);
+
+ return 0;
+err_unmap:
+ dma_unmap_single(ah->dev, bf->skbaddr, skb->len, DMA_TO_DEVICE);
+ return ret;
+}
+
+/*******************\
+* Descriptors setup *
+\*******************/
+
+static int
+ath5k_desc_alloc(struct ath5k_hw *ah)
+{
+ struct ath5k_desc *ds;
+ struct ath5k_buf *bf;
+ dma_addr_t da;
+ unsigned int i;
+ int ret;
+
+ /* allocate descriptors */
+ ah->desc_len = sizeof(struct ath5k_desc) *
+ (ATH_TXBUF + ATH_RXBUF + ATH_BCBUF + 1);
+
+ ah->desc = dma_alloc_coherent(ah->dev, ah->desc_len,
+ &ah->desc_daddr, GFP_KERNEL);
+ if (ah->desc == NULL) {
+ ATH5K_ERR(ah, "can't allocate descriptors\n");
+ ret = -ENOMEM;
+ goto err;
+ }
+ ds = ah->desc;
+ da = ah->desc_daddr;
+ ATH5K_DBG(ah, ATH5K_DEBUG_ANY, "DMA map: %p (%zu) -> %llx\n",
+ ds, ah->desc_len, (unsigned long long)ah->desc_daddr);
+
+ bf = kcalloc(1 + ATH_TXBUF + ATH_RXBUF + ATH_BCBUF,
+ sizeof(struct ath5k_buf), GFP_KERNEL);
+ if (bf == NULL) {
+ ATH5K_ERR(ah, "can't allocate bufptr\n");
+ ret = -ENOMEM;
+ goto err_free;
+ }
+ ah->bufptr = bf;
+
+ INIT_LIST_HEAD(&ah->rxbuf);
+ for (i = 0; i < ATH_RXBUF; i++, bf++, ds++, da += sizeof(*ds)) {
+ bf->desc = ds;
+ bf->daddr = da;
+ list_add_tail(&bf->list, &ah->rxbuf);
+ }
+
+ INIT_LIST_HEAD(&ah->txbuf);
+ ah->txbuf_len = ATH_TXBUF;
+ for (i = 0; i < ATH_TXBUF; i++, bf++, ds++, da += sizeof(*ds)) {
+ bf->desc = ds;
+ bf->daddr = da;
+ list_add_tail(&bf->list, &ah->txbuf);
+ }
+
+ /* beacon buffers */
+ INIT_LIST_HEAD(&ah->bcbuf);
+ for (i = 0; i < ATH_BCBUF; i++, bf++, ds++, da += sizeof(*ds)) {
+ bf->desc = ds;
+ bf->daddr = da;
+ list_add_tail(&bf->list, &ah->bcbuf);
+ }
+
+ return 0;
+err_free:
+ dma_free_coherent(ah->dev, ah->desc_len, ah->desc, ah->desc_daddr);
+err:
+ ah->desc = NULL;
+ return ret;
+}
+
+void
+ath5k_txbuf_free_skb(struct ath5k_hw *ah, struct ath5k_buf *bf)
+{
+ BUG_ON(!bf);
+ if (!bf->skb)
+ return;
+ dma_unmap_single(ah->dev, bf->skbaddr, bf->skb->len,
+ DMA_TO_DEVICE);
+ ieee80211_free_txskb(ah->hw, bf->skb);
+ bf->skb = NULL;
+ bf->skbaddr = 0;
+ bf->desc->ds_data = 0;
+}
+
+void
+ath5k_rxbuf_free_skb(struct ath5k_hw *ah, struct ath5k_buf *bf)
+{
+ struct ath_common *common = ath5k_hw_common(ah);
+
+ BUG_ON(!bf);
+ if (!bf->skb)
+ return;
+ dma_unmap_single(ah->dev, bf->skbaddr, common->rx_bufsize,
+ DMA_FROM_DEVICE);
+ dev_kfree_skb_any(bf->skb);
+ bf->skb = NULL;
+ bf->skbaddr = 0;
+ bf->desc->ds_data = 0;
+}
+
+static void
+ath5k_desc_free(struct ath5k_hw *ah)
+{
+ struct ath5k_buf *bf;
+
+ list_for_each_entry(bf, &ah->txbuf, list)
+ ath5k_txbuf_free_skb(ah, bf);
+ list_for_each_entry(bf, &ah->rxbuf, list)
+ ath5k_rxbuf_free_skb(ah, bf);
+ list_for_each_entry(bf, &ah->bcbuf, list)
+ ath5k_txbuf_free_skb(ah, bf);
+
+ /* Free memory associated with all descriptors */
+ dma_free_coherent(ah->dev, ah->desc_len, ah->desc, ah->desc_daddr);
+ ah->desc = NULL;
+ ah->desc_daddr = 0;
+
+ kfree(ah->bufptr);
+ ah->bufptr = NULL;
+}
+
+
+/**************\
+* Queues setup *
+\**************/
+
+static struct ath5k_txq *
+ath5k_txq_setup(struct ath5k_hw *ah,
+ int qtype, int subtype)
+{
+ struct ath5k_txq *txq;
+ struct ath5k_txq_info qi = {
+ .tqi_subtype = subtype,
+ /* XXX: default values not correct for B and XR channels,
+ * but who cares? */
+ .tqi_aifs = AR5K_TUNE_AIFS,
+ .tqi_cw_min = AR5K_TUNE_CWMIN,
+ .tqi_cw_max = AR5K_TUNE_CWMAX
+ };
+ int qnum;
+
+ /*
+ * Enable interrupts only for EOL and DESC conditions.
+ * We mark tx descriptors to receive a DESC interrupt
+ * when a tx queue gets deep; otherwise we wait for the
+ * EOL to reap descriptors. Note that this is done to
+ * reduce interrupt load and this only defers reaping
+ * descriptors, never transmitting frames. Aside from
+ * reducing interrupts this also permits more concurrency.
+ * The only potential downside is if the tx queue backs
+ * up in which case the top half of the kernel may backup
+ * due to a lack of tx descriptors.
+ */
+ qi.tqi_flags = AR5K_TXQ_FLAG_TXEOLINT_ENABLE |
+ AR5K_TXQ_FLAG_TXDESCINT_ENABLE;
+ qnum = ath5k_hw_setup_tx_queue(ah, qtype, &qi);
+ if (qnum < 0) {
+ /*
+ * NB: don't print a message, this happens
+ * normally on parts with too few tx queues
+ */
+ return ERR_PTR(qnum);
+ }
+ txq = &ah->txqs[qnum];
+ if (!txq->setup) {
+ txq->qnum = qnum;
+ txq->link = NULL;
+ INIT_LIST_HEAD(&txq->q);
+ spin_lock_init(&txq->lock);
+ txq->setup = true;
+ txq->txq_len = 0;
+ txq->txq_max = ATH5K_TXQ_LEN_MAX;
+ txq->txq_poll_mark = false;
+ txq->txq_stuck = 0;
+ }
+ return &ah->txqs[qnum];
+}
+
+static int
+ath5k_beaconq_setup(struct ath5k_hw *ah)
+{
+ struct ath5k_txq_info qi = {
+ /* XXX: default values not correct for B and XR channels,
+ * but who cares? */
+ .tqi_aifs = AR5K_TUNE_AIFS,
+ .tqi_cw_min = AR5K_TUNE_CWMIN,
+ .tqi_cw_max = AR5K_TUNE_CWMAX,
+ /* NB: for dynamic turbo, don't enable any other interrupts */
+ .tqi_flags = AR5K_TXQ_FLAG_TXDESCINT_ENABLE
+ };
+
+ return ath5k_hw_setup_tx_queue(ah, AR5K_TX_QUEUE_BEACON, &qi);
+}
+
+static int
+ath5k_beaconq_config(struct ath5k_hw *ah)
+{
+ struct ath5k_txq_info qi;
+ int ret;
+
+ ret = ath5k_hw_get_tx_queueprops(ah, ah->bhalq, &qi);
+ if (ret)
+ goto err;
+
+ if (ah->opmode == NL80211_IFTYPE_AP ||
+ ah->opmode == NL80211_IFTYPE_MESH_POINT) {
+ /*
+ * Always burst out beacon and CAB traffic
+ * (aifs = cwmin = cwmax = 0)
+ */
+ qi.tqi_aifs = 0;
+ qi.tqi_cw_min = 0;
+ qi.tqi_cw_max = 0;
+ } else if (ah->opmode == NL80211_IFTYPE_ADHOC) {
+ /*
+ * Adhoc mode; backoff between 0 and (2 * cw_min).
+ */
+ qi.tqi_aifs = 0;
+ qi.tqi_cw_min = 0;
+ qi.tqi_cw_max = 2 * AR5K_TUNE_CWMIN;
+ }
+
+ ATH5K_DBG(ah, ATH5K_DEBUG_BEACON,
+ "beacon queueprops tqi_aifs:%d tqi_cw_min:%d tqi_cw_max:%d\n",
+ qi.tqi_aifs, qi.tqi_cw_min, qi.tqi_cw_max);
+
+ ret = ath5k_hw_set_tx_queueprops(ah, ah->bhalq, &qi);
+ if (ret) {
+ ATH5K_ERR(ah, "%s: unable to update parameters for beacon "
+ "hardware queue!\n", __func__);
+ goto err;
+ }
+ ret = ath5k_hw_reset_tx_queue(ah, ah->bhalq); /* push to h/w */
+ if (ret)
+ goto err;
+
+ /* reconfigure cabq with ready time to 80% of beacon_interval */
+ ret = ath5k_hw_get_tx_queueprops(ah, AR5K_TX_QUEUE_ID_CAB, &qi);
+ if (ret)
+ goto err;
+
+ qi.tqi_ready_time = (ah->bintval * 80) / 100;
+ ret = ath5k_hw_set_tx_queueprops(ah, AR5K_TX_QUEUE_ID_CAB, &qi);
+ if (ret)
+ goto err;
+
+ ret = ath5k_hw_reset_tx_queue(ah, AR5K_TX_QUEUE_ID_CAB);
+err:
+ return ret;
+}
+
+/**
+ * ath5k_drain_tx_buffs - Empty tx buffers
+ *
+ * @ah: The &struct ath5k_hw
+ *
+ * Empty tx buffers from all queues in preparation
+ * of a reset or during shutdown.
+ *
+ * NB: this assumes output has been stopped and
+ * we do not need to block ath5k_tx_tasklet
+ */
+static void
+ath5k_drain_tx_buffs(struct ath5k_hw *ah)
+{
+ struct ath5k_txq *txq;
+ struct ath5k_buf *bf, *bf0;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(ah->txqs); i++) {
+ if (ah->txqs[i].setup) {
+ txq = &ah->txqs[i];
+ spin_lock_bh(&txq->lock);
+ list_for_each_entry_safe(bf, bf0, &txq->q, list) {
+ ath5k_debug_printtxbuf(ah, bf);
+
+ ath5k_txbuf_free_skb(ah, bf);
+
+ spin_lock(&ah->txbuflock);
+ list_move_tail(&bf->list, &ah->txbuf);
+ ah->txbuf_len++;
+ txq->txq_len--;
+ spin_unlock(&ah->txbuflock);
+ }
+ txq->link = NULL;
+ txq->txq_poll_mark = false;
+ spin_unlock_bh(&txq->lock);
+ }
+ }
+}
+
+static void
+ath5k_txq_release(struct ath5k_hw *ah)
+{
+ struct ath5k_txq *txq = ah->txqs;
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(ah->txqs); i++, txq++)
+ if (txq->setup) {
+ ath5k_hw_release_tx_queue(ah, txq->qnum);
+ txq->setup = false;
+ }
+}
+
+
+/*************\
+* RX Handling *
+\*************/
+
+/*
+ * Enable the receive h/w following a reset.
+ */
+static int
+ath5k_rx_start(struct ath5k_hw *ah)
+{
+ struct ath_common *common = ath5k_hw_common(ah);
+ struct ath5k_buf *bf;
+ int ret;
+
+ common->rx_bufsize = roundup(IEEE80211_MAX_FRAME_LEN, common->cachelsz);
+
+ ATH5K_DBG(ah, ATH5K_DEBUG_RESET, "cachelsz %u rx_bufsize %u\n",
+ common->cachelsz, common->rx_bufsize);
+
+ spin_lock_bh(&ah->rxbuflock);
+ ah->rxlink = NULL;
+ list_for_each_entry(bf, &ah->rxbuf, list) {
+ ret = ath5k_rxbuf_setup(ah, bf);
+ if (ret != 0) {
+ spin_unlock_bh(&ah->rxbuflock);
+ goto err;
+ }
+ }
+ bf = list_first_entry(&ah->rxbuf, struct ath5k_buf, list);
+ ath5k_hw_set_rxdp(ah, bf->daddr);
+ spin_unlock_bh(&ah->rxbuflock);
+
+ ath5k_hw_start_rx_dma(ah); /* enable recv descriptors */
+ ath5k_update_bssid_mask_and_opmode(ah, NULL); /* set filters, etc. */
+ ath5k_hw_start_rx_pcu(ah); /* re-enable PCU/DMA engine */
+
+ return 0;
+err:
+ return ret;
+}
+
+/*
+ * Disable the receive logic on PCU (DRU)
+ * In preparation for a shutdown.
+ *
+ * Note: Doesn't stop rx DMA, ath5k_hw_dma_stop
+ * does.
+ */
+static void
+ath5k_rx_stop(struct ath5k_hw *ah)
+{
+
+ ath5k_hw_set_rx_filter(ah, 0); /* clear recv filter */
+ ath5k_hw_stop_rx_pcu(ah); /* disable PCU */
+
+ ath5k_debug_printrxbuffs(ah);
+}
+
+static unsigned int
+ath5k_rx_decrypted(struct ath5k_hw *ah, struct sk_buff *skb,
+ struct ath5k_rx_status *rs)
+{
+ struct ath_common *common = ath5k_hw_common(ah);
+ struct ieee80211_hdr *hdr = (void *)skb->data;
+ unsigned int keyix, hlen;
+
+ if (!(rs->rs_status & AR5K_RXERR_DECRYPT) &&
+ rs->rs_keyix != AR5K_RXKEYIX_INVALID)
+ return RX_FLAG_DECRYPTED;
+
+ /* Apparently when a default key is used to decrypt the packet
+ the hw does not set the index used to decrypt. In such cases
+ get the index from the packet. */
+ hlen = ieee80211_hdrlen(hdr->frame_control);
+ if (ieee80211_has_protected(hdr->frame_control) &&
+ !(rs->rs_status & AR5K_RXERR_DECRYPT) &&
+ skb->len >= hlen + 4) {
+ keyix = skb->data[hlen + 3] >> 6;
+
+ if (test_bit(keyix, common->keymap))
+ return RX_FLAG_DECRYPTED;
+ }
+
+ return 0;
+}
+
+
+static void
+ath5k_check_ibss_tsf(struct ath5k_hw *ah, struct sk_buff *skb,
+ struct ieee80211_rx_status *rxs)
+{
+ u64 tsf, bc_tstamp;
+ u32 hw_tu;
+ struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)skb->data;
+
+ if (le16_to_cpu(mgmt->u.beacon.capab_info) & WLAN_CAPABILITY_IBSS) {
+ /*
+ * Received an IBSS beacon with the same BSSID. Hardware *must*
+ * have updated the local TSF. We have to work around various
+ * hardware bugs, though...
+ */
+ tsf = ath5k_hw_get_tsf64(ah);
+ bc_tstamp = le64_to_cpu(mgmt->u.beacon.timestamp);
+ hw_tu = TSF_TO_TU(tsf);
+
+ ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_BEACON,
+ "beacon %llx mactime %llx (diff %lld) tsf now %llx\n",
+ (unsigned long long)bc_tstamp,
+ (unsigned long long)rxs->mactime,
+ (unsigned long long)(rxs->mactime - bc_tstamp),
+ (unsigned long long)tsf);
+
+ /*
+ * Sometimes the HW will give us a wrong tstamp in the rx
+ * status, causing the timestamp extension to go wrong.
+ * (This seems to happen especially with beacon frames bigger
+ * than 78 byte (incl. FCS))
+ * But we know that the receive timestamp must be later than the
+ * timestamp of the beacon since HW must have synced to that.
+ *
+ * NOTE: here we assume mactime to be after the frame was
+ * received, not like mac80211 which defines it at the start.
+ */
+ if (bc_tstamp > rxs->mactime) {
+ ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_BEACON,
+ "fixing mactime from %llx to %llx\n",
+ (unsigned long long)rxs->mactime,
+ (unsigned long long)tsf);
+ rxs->mactime = tsf;
+ }
+
+ /*
+ * Local TSF might have moved higher than our beacon timers,
+ * in that case we have to update them to continue sending
+ * beacons. This also takes care of synchronizing beacon sending
+ * times with other stations.
+ */
+ if (hw_tu >= ah->nexttbtt)
+ ath5k_beacon_update_timers(ah, bc_tstamp);
+
+ /* Check if the beacon timers are still correct, because a TSF
+ * update might have created a window between them - for a
+ * longer description see the comment of this function: */
+ if (!ath5k_hw_check_beacon_timers(ah, ah->bintval)) {
+ ath5k_beacon_update_timers(ah, bc_tstamp);
+ ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_BEACON,
+ "fixed beacon timers after beacon receive\n");
+ }
+ }
+}
+
+/*
+ * Compute padding position. skb must contain an IEEE 802.11 frame
+ */
+static int ath5k_common_padpos(struct sk_buff *skb)
+{
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+ __le16 frame_control = hdr->frame_control;
+ int padpos = 24;
+
+ if (ieee80211_has_a4(frame_control))
+ padpos += ETH_ALEN;
+
+ if (ieee80211_is_data_qos(frame_control))
+ padpos += IEEE80211_QOS_CTL_LEN;
+
+ return padpos;
+}
+
+/*
+ * This function expects an 802.11 frame and returns the number of
+ * bytes added, or -1 if we don't have enough header room.
+ */
+static int ath5k_add_padding(struct sk_buff *skb)
+{
+ int padpos = ath5k_common_padpos(skb);
+ int padsize = padpos & 3;
+
+ if (padsize && skb->len > padpos) {
+
+ if (skb_headroom(skb) < padsize)
+ return -1;
+
+ skb_push(skb, padsize);
+ memmove(skb->data, skb->data + padsize, padpos);
+ return padsize;
+ }
+
+ return 0;
+}
+
+/*
+ * The MAC header is padded to have 32-bit boundary if the
+ * packet payload is non-zero. The general calculation for
+ * padsize would take into account odd header lengths:
+ * padsize = 4 - (hdrlen & 3); however, since only
+ * even-length headers are used, padding can only be 0 or 2
+ * bytes and we can optimize this a bit. We must not try to
+ * remove padding from short control frames that do not have a
+ * payload.
+ *
+ * This function expects an 802.11 frame and returns the number of
+ * bytes removed.
+ */
+static int ath5k_remove_padding(struct sk_buff *skb)
+{
+ int padpos = ath5k_common_padpos(skb);
+ int padsize = padpos & 3;
+
+ if (padsize && skb->len >= padpos + padsize) {
+ memmove(skb->data + padsize, skb->data, padpos);
+ skb_pull(skb, padsize);
+ return padsize;
+ }
+
+ return 0;
+}
+
+static void
+ath5k_receive_frame(struct ath5k_hw *ah, struct sk_buff *skb,
+ struct ath5k_rx_status *rs)
+{
+ struct ieee80211_rx_status *rxs;
+ struct ath_common *common = ath5k_hw_common(ah);
+
+ ath5k_remove_padding(skb);
+
+ rxs = IEEE80211_SKB_RXCB(skb);
+
+ rxs->flag = 0;
+ if (unlikely(rs->rs_status & AR5K_RXERR_MIC))
+ rxs->flag |= RX_FLAG_MMIC_ERROR;
+ if (unlikely(rs->rs_status & AR5K_RXERR_CRC))
+ rxs->flag |= RX_FLAG_FAILED_FCS_CRC;
+
+
+ /*
+ * always extend the mac timestamp, since this information is
+ * also needed for proper IBSS merging.
+ *
+ * XXX: it might be too late to do it here, since rs_tstamp is
+ * 15bit only. that means TSF extension has to be done within
+ * 32768usec (about 32ms). it might be necessary to move this to
+ * the interrupt handler, like it is done in madwifi.
+ */
+ rxs->mactime = ath5k_extend_tsf(ah, rs->rs_tstamp);
+ rxs->flag |= RX_FLAG_MACTIME_END;
+
+ rxs->freq = ah->curchan->center_freq;
+ rxs->band = ah->curchan->band;
+
+ rxs->signal = ah->ah_noise_floor + rs->rs_rssi;
+
+ rxs->antenna = rs->rs_antenna;
+
+ if (rs->rs_antenna > 0 && rs->rs_antenna < 5)
+ ah->stats.antenna_rx[rs->rs_antenna]++;
+ else
+ ah->stats.antenna_rx[0]++; /* invalid */
+
+ rxs->rate_idx = ath5k_hw_to_driver_rix(ah, rs->rs_rate);
+ rxs->flag |= ath5k_rx_decrypted(ah, skb, rs);
+ switch (ah->ah_bwmode) {
+ case AR5K_BWMODE_5MHZ:
+ rxs->bw = RATE_INFO_BW_5;
+ break;
+ case AR5K_BWMODE_10MHZ:
+ rxs->bw = RATE_INFO_BW_10;
+ break;
+ default:
+ break;
+ }
+
+ if (rs->rs_rate ==
+ ah->sbands[ah->curchan->band].bitrates[rxs->rate_idx].hw_value_short)
+ rxs->enc_flags |= RX_ENC_FLAG_SHORTPRE;
+
+ trace_ath5k_rx(ah, skb);
+
+ if (ath_is_mybeacon(common, (struct ieee80211_hdr *)skb->data)) {
+ ewma_beacon_rssi_add(&ah->ah_beacon_rssi_avg, rs->rs_rssi);
+
+ /* check beacons in IBSS mode */
+ if (ah->opmode == NL80211_IFTYPE_ADHOC)
+ ath5k_check_ibss_tsf(ah, skb, rxs);
+ }
+
+ ieee80211_rx(ah->hw, skb);
+}
+
+/** ath5k_frame_receive_ok() - Do we want to receive this frame or not?
+ *
+ * Check if we want to further process this frame or not. Also update
+ * statistics. Return true if we want this frame, false if not.
+ */
+static bool
+ath5k_receive_frame_ok(struct ath5k_hw *ah, struct ath5k_rx_status *rs)
+{
+ ah->stats.rx_all_count++;
+ ah->stats.rx_bytes_count += rs->rs_datalen;
+
+ if (unlikely(rs->rs_status)) {
+ unsigned int filters;
+
+ if (rs->rs_status & AR5K_RXERR_CRC)
+ ah->stats.rxerr_crc++;
+ if (rs->rs_status & AR5K_RXERR_FIFO)
+ ah->stats.rxerr_fifo++;
+ if (rs->rs_status & AR5K_RXERR_PHY) {
+ ah->stats.rxerr_phy++;
+ if (rs->rs_phyerr > 0 && rs->rs_phyerr < 32)
+ ah->stats.rxerr_phy_code[rs->rs_phyerr]++;
+
+ /*
+ * Treat packets that underwent a CCK or OFDM reset as having a bad CRC.
+ * These restarts happen when the radio resynchronizes to a stronger frame
+ * while receiving a weaker frame. Here we receive the prefix of the weak
+ * frame. Since these are incomplete packets, mark their CRC as invalid.
+ */
+ if (rs->rs_phyerr == AR5K_RX_PHY_ERROR_OFDM_RESTART ||
+ rs->rs_phyerr == AR5K_RX_PHY_ERROR_CCK_RESTART) {
+ rs->rs_status |= AR5K_RXERR_CRC;
+ rs->rs_status &= ~AR5K_RXERR_PHY;
+ } else {
+ return false;
+ }
+ }
+ if (rs->rs_status & AR5K_RXERR_DECRYPT) {
+ /*
+ * Decrypt error. If the error occurred
+ * because there was no hardware key, then
+ * let the frame through so the upper layers
+ * can process it. This is necessary for 5210
+ * parts which have no way to setup a ``clear''
+ * key cache entry.
+ *
+ * XXX do key cache faulting
+ */
+ ah->stats.rxerr_decrypt++;
+ if (rs->rs_keyix == AR5K_RXKEYIX_INVALID &&
+ !(rs->rs_status & AR5K_RXERR_CRC))
+ return true;
+ }
+ if (rs->rs_status & AR5K_RXERR_MIC) {
+ ah->stats.rxerr_mic++;
+ return true;
+ }
+
+ /*
+ * Reject any frames with non-crypto errors, and take into account the
+ * current FIF_* filters.
+ */
+ filters = AR5K_RXERR_DECRYPT;
+ if (ah->fif_filter_flags & FIF_FCSFAIL)
+ filters |= AR5K_RXERR_CRC;
+
+ if (rs->rs_status & ~filters)
+ return false;
+ }
+
+ if (unlikely(rs->rs_more)) {
+ ah->stats.rxerr_jumbo++;
+ return false;
+ }
+ return true;
+}
+
+static void
+ath5k_set_current_imask(struct ath5k_hw *ah)
+{
+ enum ath5k_int imask;
+ unsigned long flags;
+
+ if (test_bit(ATH_STAT_RESET, ah->status))
+ return;
+
+ spin_lock_irqsave(&ah->irqlock, flags);
+ imask = ah->imask;
+ if (ah->rx_pending)
+ imask &= ~AR5K_INT_RX_ALL;
+ if (ah->tx_pending)
+ imask &= ~AR5K_INT_TX_ALL;
+ ath5k_hw_set_imr(ah, imask);
+ spin_unlock_irqrestore(&ah->irqlock, flags);
+}
+
+static void
+ath5k_tasklet_rx(struct tasklet_struct *t)
+{
+ struct ath5k_rx_status rs = {};
+ struct sk_buff *skb, *next_skb;
+ dma_addr_t next_skb_addr;
+ struct ath5k_hw *ah = from_tasklet(ah, t, rxtq);
+ struct ath_common *common = ath5k_hw_common(ah);
+ struct ath5k_buf *bf;
+ struct ath5k_desc *ds;
+ int ret;
+
+ spin_lock(&ah->rxbuflock);
+ if (list_empty(&ah->rxbuf)) {
+ ATH5K_WARN(ah, "empty rx buf pool\n");
+ goto unlock;
+ }
+ do {
+ bf = list_first_entry(&ah->rxbuf, struct ath5k_buf, list);
+ BUG_ON(bf->skb == NULL);
+ skb = bf->skb;
+ ds = bf->desc;
+
+ /* bail if HW is still using self-linked descriptor */
+ if (ath5k_hw_get_rxdp(ah) == bf->daddr)
+ break;
+
+ ret = ah->ah_proc_rx_desc(ah, ds, &rs);
+ if (unlikely(ret == -EINPROGRESS))
+ break;
+ else if (unlikely(ret)) {
+ ATH5K_ERR(ah, "error in processing rx descriptor\n");
+ ah->stats.rxerr_proc++;
+ break;
+ }
+
+ if (ath5k_receive_frame_ok(ah, &rs)) {
+ next_skb = ath5k_rx_skb_alloc(ah, &next_skb_addr);
+
+ /*
+ * If we can't replace bf->skb with a new skb under
+ * memory pressure, just skip this packet
+ */
+ if (!next_skb)
+ goto next;
+
+ dma_unmap_single(ah->dev, bf->skbaddr,
+ common->rx_bufsize,
+ DMA_FROM_DEVICE);
+
+ skb_put(skb, rs.rs_datalen);
+
+ ath5k_receive_frame(ah, skb, &rs);
+
+ bf->skb = next_skb;
+ bf->skbaddr = next_skb_addr;
+ }
+next:
+ list_move_tail(&bf->list, &ah->rxbuf);
+ } while (ath5k_rxbuf_setup(ah, bf) == 0);
+unlock:
+ spin_unlock(&ah->rxbuflock);
+ ah->rx_pending = false;
+ ath5k_set_current_imask(ah);
+}
+
+
+/*************\
+* TX Handling *
+\*************/
+
+void
+ath5k_tx_queue(struct ieee80211_hw *hw, struct sk_buff *skb,
+ struct ath5k_txq *txq, struct ieee80211_tx_control *control)
+{
+ struct ath5k_hw *ah = hw->priv;
+ struct ath5k_buf *bf;
+ unsigned long flags;
+ int padsize;
+
+ trace_ath5k_tx(ah, skb, txq);
+
+ /*
+ * The hardware expects the header padded to 4 byte boundaries.
+ * If this is not the case, we add the padding after the header.
+ */
+ padsize = ath5k_add_padding(skb);
+ if (padsize < 0) {
+ ATH5K_ERR(ah, "tx hdrlen not %%4: not enough"
+ " headroom to pad");
+ goto drop_packet;
+ }
+
+ if (txq->txq_len >= txq->txq_max &&
+ txq->qnum <= AR5K_TX_QUEUE_ID_DATA_MAX)
+ ieee80211_stop_queue(hw, txq->qnum);
+
+ spin_lock_irqsave(&ah->txbuflock, flags);
+ if (list_empty(&ah->txbuf)) {
+ ATH5K_ERR(ah, "no further txbuf available, dropping packet\n");
+ spin_unlock_irqrestore(&ah->txbuflock, flags);
+ ieee80211_stop_queues(hw);
+ goto drop_packet;
+ }
+ bf = list_first_entry(&ah->txbuf, struct ath5k_buf, list);
+ list_del(&bf->list);
+ ah->txbuf_len--;
+ if (list_empty(&ah->txbuf))
+ ieee80211_stop_queues(hw);
+ spin_unlock_irqrestore(&ah->txbuflock, flags);
+
+ bf->skb = skb;
+
+ if (ath5k_txbuf_setup(ah, bf, txq, padsize, control)) {
+ bf->skb = NULL;
+ spin_lock_irqsave(&ah->txbuflock, flags);
+ list_add_tail(&bf->list, &ah->txbuf);
+ ah->txbuf_len++;
+ spin_unlock_irqrestore(&ah->txbuflock, flags);
+ goto drop_packet;
+ }
+ return;
+
+drop_packet:
+ ieee80211_free_txskb(hw, skb);
+}
+
+static void
+ath5k_tx_frame_completed(struct ath5k_hw *ah, struct sk_buff *skb,
+ struct ath5k_txq *txq, struct ath5k_tx_status *ts,
+ struct ath5k_buf *bf)
+{
+ struct ieee80211_tx_info *info;
+ u8 tries[3];
+ int i;
+ int size = 0;
+
+ ah->stats.tx_all_count++;
+ ah->stats.tx_bytes_count += skb->len;
+ info = IEEE80211_SKB_CB(skb);
+
+ size = min_t(int, sizeof(info->status.rates), sizeof(bf->rates));
+ memcpy(info->status.rates, bf->rates, size);
+
+ tries[0] = info->status.rates[0].count;
+ tries[1] = info->status.rates[1].count;
+ tries[2] = info->status.rates[2].count;
+
+ ieee80211_tx_info_clear_status(info);
+
+ for (i = 0; i < ts->ts_final_idx; i++) {
+ struct ieee80211_tx_rate *r =
+ &info->status.rates[i];
+
+ r->count = tries[i];
+ }
+
+ info->status.rates[ts->ts_final_idx].count = ts->ts_final_retry;
+ info->status.rates[ts->ts_final_idx + 1].idx = -1;
+
+ if (unlikely(ts->ts_status)) {
+ ah->stats.ack_fail++;
+ if (ts->ts_status & AR5K_TXERR_FILT) {
+ info->flags |= IEEE80211_TX_STAT_TX_FILTERED;
+ ah->stats.txerr_filt++;
+ }
+ if (ts->ts_status & AR5K_TXERR_XRETRY)
+ ah->stats.txerr_retry++;
+ if (ts->ts_status & AR5K_TXERR_FIFO)
+ ah->stats.txerr_fifo++;
+ } else {
+ info->flags |= IEEE80211_TX_STAT_ACK;
+ info->status.ack_signal = ts->ts_rssi;
+
+ /* count the successful attempt as well */
+ info->status.rates[ts->ts_final_idx].count++;
+ }
+
+ /*
+ * Remove MAC header padding before giving the frame
+ * back to mac80211.
+ */
+ ath5k_remove_padding(skb);
+
+ if (ts->ts_antenna > 0 && ts->ts_antenna < 5)
+ ah->stats.antenna_tx[ts->ts_antenna]++;
+ else
+ ah->stats.antenna_tx[0]++; /* invalid */
+
+ trace_ath5k_tx_complete(ah, skb, txq, ts);
+ ieee80211_tx_status(ah->hw, skb);
+}
+
+static void
+ath5k_tx_processq(struct ath5k_hw *ah, struct ath5k_txq *txq)
+{
+ struct ath5k_tx_status ts = {};
+ struct ath5k_buf *bf, *bf0;
+ struct ath5k_desc *ds;
+ struct sk_buff *skb;
+ int ret;
+
+ spin_lock(&txq->lock);
+ list_for_each_entry_safe(bf, bf0, &txq->q, list) {
+
+ txq->txq_poll_mark = false;
+
+ /* skb might already have been processed last time. */
+ if (bf->skb != NULL) {
+ ds = bf->desc;
+
+ ret = ah->ah_proc_tx_desc(ah, ds, &ts);
+ if (unlikely(ret == -EINPROGRESS))
+ break;
+ else if (unlikely(ret)) {
+ ATH5K_ERR(ah,
+ "error %d while processing "
+ "queue %u\n", ret, txq->qnum);
+ break;
+ }
+
+ skb = bf->skb;
+ bf->skb = NULL;
+
+ dma_unmap_single(ah->dev, bf->skbaddr, skb->len,
+ DMA_TO_DEVICE);
+ ath5k_tx_frame_completed(ah, skb, txq, &ts, bf);
+ }
+
+ /*
+ * It's possible that the hardware can say the buffer is
+ * completed when it hasn't yet loaded the ds_link from
+ * host memory and moved on.
+ * Always keep the last descriptor to avoid HW races...
+ */
+ if (ath5k_hw_get_txdp(ah, txq->qnum) != bf->daddr) {
+ spin_lock(&ah->txbuflock);
+ list_move_tail(&bf->list, &ah->txbuf);
+ ah->txbuf_len++;
+ txq->txq_len--;
+ spin_unlock(&ah->txbuflock);
+ }
+ }
+ spin_unlock(&txq->lock);
+ if (txq->txq_len < ATH5K_TXQ_LEN_LOW && txq->qnum < 4)
+ ieee80211_wake_queue(ah->hw, txq->qnum);
+}
+
+static void
+ath5k_tasklet_tx(struct tasklet_struct *t)
+{
+ int i;
+ struct ath5k_hw *ah = from_tasklet(ah, t, txtq);
+
+ for (i = 0; i < AR5K_NUM_TX_QUEUES; i++)
+ if (ah->txqs[i].setup && (ah->ah_txq_isr_txok_all & BIT(i)))
+ ath5k_tx_processq(ah, &ah->txqs[i]);
+
+ ah->tx_pending = false;
+ ath5k_set_current_imask(ah);
+}
+
+
+/*****************\
+* Beacon handling *
+\*****************/
+
+/*
+ * Setup the beacon frame for transmit.
+ */
+static int
+ath5k_beacon_setup(struct ath5k_hw *ah, struct ath5k_buf *bf)
+{
+ struct sk_buff *skb = bf->skb;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ struct ath5k_desc *ds;
+ int ret = 0;
+ u8 antenna;
+ u32 flags;
+ const int padsize = 0;
+
+ bf->skbaddr = dma_map_single(ah->dev, skb->data, skb->len,
+ DMA_TO_DEVICE);
+ ATH5K_DBG(ah, ATH5K_DEBUG_BEACON, "skb %p [data %p len %u] "
+ "skbaddr %llx\n", skb, skb->data, skb->len,
+ (unsigned long long)bf->skbaddr);
+
+ if (dma_mapping_error(ah->dev, bf->skbaddr)) {
+ ATH5K_ERR(ah, "beacon DMA mapping failed\n");
+ dev_kfree_skb_any(skb);
+ bf->skb = NULL;
+ return -EIO;
+ }
+
+ ds = bf->desc;
+ antenna = ah->ah_tx_ant;
+
+ flags = AR5K_TXDESC_NOACK;
+ if (ah->opmode == NL80211_IFTYPE_ADHOC && ath5k_hw_hasveol(ah)) {
+ ds->ds_link = bf->daddr; /* self-linked */
+ flags |= AR5K_TXDESC_VEOL;
+ } else
+ ds->ds_link = 0;
+
+ /*
+ * If we use multiple antennas on AP and use
+ * the Sectored AP scenario, switch antenna every
+ * 4 beacons to make sure everybody hears our AP.
+ * When a client tries to associate, hw will keep
+ * track of the tx antenna to be used for this client
+ * automatically, based on ACKed packets.
+ *
+ * Note: AP still listens and transmits RTS on the
+ * default antenna which is supposed to be an omni.
+ *
+ * Note2: On sectored scenarios it's possible to have
+ * multiple antennas (1 omni -- the default -- and 14
+ * sectors), so if we choose to actually support this
+ * mode, we need to allow the user to set how many antennas
+ * we have and tweak the code below to send beacons
+ * on all of them.
+ */
+ if (ah->ah_ant_mode == AR5K_ANTMODE_SECTOR_AP)
+ antenna = ah->bsent & 4 ? 2 : 1;
+
+
+ /* FIXME: If we are in g mode and rate is a CCK rate
+ * subtract ah->ah_txpower.txp_cck_ofdm_pwr_delta
+ * from tx power (value is in dB units already) */
+ ds->ds_data = bf->skbaddr;
+ ret = ah->ah_setup_tx_desc(ah, ds, skb->len,
+ ieee80211_get_hdrlen_from_skb(skb), padsize,
+ AR5K_PKT_TYPE_BEACON,
+ (ah->ah_txpower.txp_requested * 2),
+ ieee80211_get_tx_rate(ah->hw, info)->hw_value,
+ 1, AR5K_TXKEYIX_INVALID,
+ antenna, flags, 0, 0);
+ if (ret)
+ goto err_unmap;
+
+ return 0;
+err_unmap:
+ dma_unmap_single(ah->dev, bf->skbaddr, skb->len, DMA_TO_DEVICE);
+ return ret;
+}
+
+/*
+ * Updates the beacon that is sent by ath5k_beacon_send. For adhoc,
+ * this is called only once at config_bss time, for AP we do it every
+ * SWBA interrupt so that the TIM will reflect buffered frames.
+ *
+ * Called with the beacon lock.
+ */
+int
+ath5k_beacon_update(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
+{
+ int ret;
+ struct ath5k_hw *ah = hw->priv;
+ struct ath5k_vif *avf;
+ struct sk_buff *skb;
+
+ if (WARN_ON(!vif)) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ skb = ieee80211_beacon_get(hw, vif, 0);
+
+ if (!skb) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ avf = (void *)vif->drv_priv;
+ ath5k_txbuf_free_skb(ah, avf->bbuf);
+ avf->bbuf->skb = skb;
+ ret = ath5k_beacon_setup(ah, avf->bbuf);
+out:
+ return ret;
+}
+
+/*
+ * Transmit a beacon frame at SWBA. Dynamic updates to the
+ * frame contents are done as needed and the slot time is
+ * also adjusted based on current state.
+ *
+ * This is called from software irq context (beacontq tasklets)
+ * or user context from ath5k_beacon_config.
+ */
+static void
+ath5k_beacon_send(struct ath5k_hw *ah)
+{
+ struct ieee80211_vif *vif;
+ struct ath5k_vif *avf;
+ struct ath5k_buf *bf;
+ struct sk_buff *skb;
+ int err;
+
+ ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_BEACON, "in beacon_send\n");
+
+ /*
+ * Check if the previous beacon has gone out. If
+ * not, don't try to post another: skip this
+ * period and wait for the next. Missed beacons
+ * indicate a problem and should not occur. If we
+ * miss too many consecutive beacons reset the device.
+ */
+ if (unlikely(ath5k_hw_num_tx_pending(ah, ah->bhalq) != 0)) {
+ ah->bmisscount++;
+ ATH5K_DBG(ah, ATH5K_DEBUG_BEACON,
+ "missed %u consecutive beacons\n", ah->bmisscount);
+ if (ah->bmisscount > 10) { /* NB: 10 is a guess */
+ ATH5K_DBG(ah, ATH5K_DEBUG_BEACON,
+ "stuck beacon time (%u missed)\n",
+ ah->bmisscount);
+ ATH5K_DBG(ah, ATH5K_DEBUG_RESET,
+ "stuck beacon, resetting\n");
+ ieee80211_queue_work(ah->hw, &ah->reset_work);
+ }
+ return;
+ }
+ if (unlikely(ah->bmisscount != 0)) {
+ ATH5K_DBG(ah, ATH5K_DEBUG_BEACON,
+ "resume beacon xmit after %u misses\n",
+ ah->bmisscount);
+ ah->bmisscount = 0;
+ }
+
+ if ((ah->opmode == NL80211_IFTYPE_AP && ah->num_ap_vifs +
+ ah->num_mesh_vifs > 1) ||
+ ah->opmode == NL80211_IFTYPE_MESH_POINT) {
+ u64 tsf = ath5k_hw_get_tsf64(ah);
+ u32 tsftu = TSF_TO_TU(tsf);
+ int slot = ((tsftu % ah->bintval) * ATH_BCBUF) / ah->bintval;
+ vif = ah->bslot[(slot + 1) % ATH_BCBUF];
+ ATH5K_DBG(ah, ATH5K_DEBUG_BEACON,
+ "tsf %llx tsftu %x intval %u slot %u vif %p\n",
+ (unsigned long long)tsf, tsftu, ah->bintval, slot, vif);
+ } else /* only one interface */
+ vif = ah->bslot[0];
+
+ if (!vif)
+ return;
+
+ avf = (void *)vif->drv_priv;
+ bf = avf->bbuf;
+
+ /*
+ * Stop any current dma and put the new frame on the queue.
+ * This should never fail since we check above that no frames
+ * are still pending on the queue.
+ */
+ if (unlikely(ath5k_hw_stop_beacon_queue(ah, ah->bhalq))) {
+ ATH5K_WARN(ah, "beacon queue %u didn't start/stop ?\n", ah->bhalq);
+ /* NB: hw still stops DMA, so proceed */
+ }
+
+ /* refresh the beacon for AP or MESH mode */
+ if (ah->opmode == NL80211_IFTYPE_AP ||
+ ah->opmode == NL80211_IFTYPE_MESH_POINT) {
+ err = ath5k_beacon_update(ah->hw, vif);
+ if (err)
+ return;
+ }
+
+ if (unlikely(bf->skb == NULL || ah->opmode == NL80211_IFTYPE_STATION ||
+ ah->opmode == NL80211_IFTYPE_MONITOR)) {
+ ATH5K_WARN(ah, "bf=%p bf_skb=%p\n", bf, bf->skb);
+ return;
+ }
+
+ trace_ath5k_tx(ah, bf->skb, &ah->txqs[ah->bhalq]);
+
+ ath5k_hw_set_txdp(ah, ah->bhalq, bf->daddr);
+ ath5k_hw_start_tx_dma(ah, ah->bhalq);
+ ATH5K_DBG(ah, ATH5K_DEBUG_BEACON, "TXDP[%u] = %llx (%p)\n",
+ ah->bhalq, (unsigned long long)bf->daddr, bf->desc);
+
+ skb = ieee80211_get_buffered_bc(ah->hw, vif);
+ while (skb) {
+ ath5k_tx_queue(ah->hw, skb, ah->cabq, NULL);
+
+ if (ah->cabq->txq_len >= ah->cabq->txq_max)
+ break;
+
+ skb = ieee80211_get_buffered_bc(ah->hw, vif);
+ }
+
+ ah->bsent++;
+}
+
+/**
+ * ath5k_beacon_update_timers - update beacon timers
+ *
+ * @ah: struct ath5k_hw pointer we are operating on
+ * @bc_tsf: the timestamp of the beacon. 0 to reset the TSF. -1 to perform a
+ * beacon timer update based on the current HW TSF.
+ *
+ * Calculate the next target beacon transmit time (TBTT) based on the timestamp
+ * of a received beacon or the current local hardware TSF and write it to the
+ * beacon timer registers.
+ *
+ * This is called in a variety of situations, e.g. when a beacon is received,
+ * when a TSF update has been detected, but also when an new IBSS is created or
+ * when we otherwise know we have to update the timers, but we keep it in this
+ * function to have it all together in one place.
+ */
+void
+ath5k_beacon_update_timers(struct ath5k_hw *ah, u64 bc_tsf)
+{
+ u32 nexttbtt, intval, hw_tu, bc_tu;
+ u64 hw_tsf;
+
+ intval = ah->bintval & AR5K_BEACON_PERIOD;
+ if (ah->opmode == NL80211_IFTYPE_AP && ah->num_ap_vifs
+ + ah->num_mesh_vifs > 1) {
+ intval /= ATH_BCBUF; /* staggered multi-bss beacons */
+ if (intval < 15)
+ ATH5K_WARN(ah, "intval %u is too low, min 15\n",
+ intval);
+ }
+ if (WARN_ON(!intval))
+ return;
+
+ /* beacon TSF converted to TU */
+ bc_tu = TSF_TO_TU(bc_tsf);
+
+ /* current TSF converted to TU */
+ hw_tsf = ath5k_hw_get_tsf64(ah);
+ hw_tu = TSF_TO_TU(hw_tsf);
+
+#define FUDGE (AR5K_TUNE_SW_BEACON_RESP + 3)
+ /* We use FUDGE to make sure the next TBTT is ahead of the current TU.
+ * Since we later subtract AR5K_TUNE_SW_BEACON_RESP (10) in the timer
+ * configuration we need to make sure it is bigger than that. */
+
+ if (bc_tsf == -1) {
+ /*
+ * no beacons received, called internally.
+ * just need to refresh timers based on HW TSF.
+ */
+ nexttbtt = roundup(hw_tu + FUDGE, intval);
+ } else if (bc_tsf == 0) {
+ /*
+ * no beacon received, probably called by ath5k_reset_tsf().
+ * reset TSF to start with 0.
+ */
+ nexttbtt = intval;
+ intval |= AR5K_BEACON_RESET_TSF;
+ } else if (bc_tsf > hw_tsf) {
+ /*
+ * beacon received, SW merge happened but HW TSF not yet updated.
+ * not possible to reconfigure timers yet, but next time we
+ * receive a beacon with the same BSSID, the hardware will
+ * automatically update the TSF and then we need to reconfigure
+ * the timers.
+ */
+ ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_BEACON,
+ "need to wait for HW TSF sync\n");
+ return;
+ } else {
+ /*
+ * most important case for beacon synchronization between STA.
+ *
+ * beacon received and HW TSF has been already updated by HW.
+ * update next TBTT based on the TSF of the beacon, but make
+ * sure it is ahead of our local TSF timer.
+ */
+ nexttbtt = bc_tu + roundup(hw_tu + FUDGE - bc_tu, intval);
+ }
+#undef FUDGE
+
+ ah->nexttbtt = nexttbtt;
+
+ intval |= AR5K_BEACON_ENA;
+ ath5k_hw_init_beacon_timers(ah, nexttbtt, intval);
+
+ /*
+ * debugging output last in order to preserve the time critical aspect
+ * of this function
+ */
+ if (bc_tsf == -1)
+ ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_BEACON,
+ "reconfigured timers based on HW TSF\n");
+ else if (bc_tsf == 0)
+ ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_BEACON,
+ "reset HW TSF and timers\n");
+ else
+ ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_BEACON,
+ "updated timers based on beacon TSF\n");
+
+ ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_BEACON,
+ "bc_tsf %llx hw_tsf %llx bc_tu %u hw_tu %u nexttbtt %u\n",
+ (unsigned long long) bc_tsf,
+ (unsigned long long) hw_tsf, bc_tu, hw_tu, nexttbtt);
+ ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_BEACON, "intval %u %s %s\n",
+ intval & AR5K_BEACON_PERIOD,
+ intval & AR5K_BEACON_ENA ? "AR5K_BEACON_ENA" : "",
+ intval & AR5K_BEACON_RESET_TSF ? "AR5K_BEACON_RESET_TSF" : "");
+}
+
+/**
+ * ath5k_beacon_config - Configure the beacon queues and interrupts
+ *
+ * @ah: struct ath5k_hw pointer we are operating on
+ *
+ * In IBSS mode we use a self-linked tx descriptor if possible. We enable SWBA
+ * interrupts to detect TSF updates only.
+ */
+void
+ath5k_beacon_config(struct ath5k_hw *ah)
+{
+ spin_lock_bh(&ah->block);
+ ah->bmisscount = 0;
+ ah->imask &= ~(AR5K_INT_BMISS | AR5K_INT_SWBA);
+
+ if (ah->enable_beacon) {
+ /*
+ * In IBSS mode we use a self-linked tx descriptor and let the
+ * hardware send the beacons automatically. We have to load it
+ * only once here.
+ * We use the SWBA interrupt only to keep track of the beacon
+ * timers in order to detect automatic TSF updates.
+ */
+ ath5k_beaconq_config(ah);
+
+ ah->imask |= AR5K_INT_SWBA;
+
+ if (ah->opmode == NL80211_IFTYPE_ADHOC) {
+ if (ath5k_hw_hasveol(ah))
+ ath5k_beacon_send(ah);
+ } else
+ ath5k_beacon_update_timers(ah, -1);
+ } else {
+ ath5k_hw_stop_beacon_queue(ah, ah->bhalq);
+ }
+
+ ath5k_hw_set_imr(ah, ah->imask);
+ spin_unlock_bh(&ah->block);
+}
+
+static void ath5k_tasklet_beacon(struct tasklet_struct *t)
+{
+ struct ath5k_hw *ah = from_tasklet(ah, t, beacontq);
+
+ /*
+ * Software beacon alert--time to send a beacon.
+ *
+ * In IBSS mode we use this interrupt just to
+ * keep track of the next TBTT (target beacon
+ * transmission time) in order to detect whether
+ * automatic TSF updates happened.
+ */
+ if (ah->opmode == NL80211_IFTYPE_ADHOC) {
+ /* XXX: only if VEOL supported */
+ u64 tsf = ath5k_hw_get_tsf64(ah);
+ ah->nexttbtt += ah->bintval;
+ ATH5K_DBG(ah, ATH5K_DEBUG_BEACON,
+ "SWBA nexttbtt: %x hw_tu: %x "
+ "TSF: %llx\n",
+ ah->nexttbtt,
+ TSF_TO_TU(tsf),
+ (unsigned long long) tsf);
+ } else {
+ spin_lock(&ah->block);
+ ath5k_beacon_send(ah);
+ spin_unlock(&ah->block);
+ }
+}
+
+
+/********************\
+* Interrupt handling *
+\********************/
+
+static void
+ath5k_intr_calibration_poll(struct ath5k_hw *ah)
+{
+ if (time_is_before_eq_jiffies(ah->ah_cal_next_ani) &&
+ !(ah->ah_cal_mask & AR5K_CALIBRATION_FULL) &&
+ !(ah->ah_cal_mask & AR5K_CALIBRATION_SHORT)) {
+
+ /* Run ANI only when calibration is not active */
+
+ ah->ah_cal_next_ani = jiffies +
+ msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_ANI);
+ tasklet_schedule(&ah->ani_tasklet);
+
+ } else if (time_is_before_eq_jiffies(ah->ah_cal_next_short) &&
+ !(ah->ah_cal_mask & AR5K_CALIBRATION_FULL) &&
+ !(ah->ah_cal_mask & AR5K_CALIBRATION_SHORT)) {
+
+ /* Run calibration only when another calibration
+ * is not running.
+ *
+ * Note: This is for both full/short calibration,
+ * if it's time for a full one, ath5k_calibrate_work will deal
+ * with it. */
+
+ ah->ah_cal_next_short = jiffies +
+ msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_SHORT);
+ ieee80211_queue_work(ah->hw, &ah->calib_work);
+ }
+ /* we could use SWI to generate enough interrupts to meet our
+ * calibration interval requirements, if necessary:
+ * AR5K_REG_ENABLE_BITS(ah, AR5K_CR, AR5K_CR_SWI); */
+}
+
+static void
+ath5k_schedule_rx(struct ath5k_hw *ah)
+{
+ ah->rx_pending = true;
+ tasklet_schedule(&ah->rxtq);
+}
+
+static void
+ath5k_schedule_tx(struct ath5k_hw *ah)
+{
+ ah->tx_pending = true;
+ tasklet_schedule(&ah->txtq);
+}
+
+static irqreturn_t
+ath5k_intr(int irq, void *dev_id)
+{
+ struct ath5k_hw *ah = dev_id;
+ enum ath5k_int status;
+ unsigned int counter = 1000;
+
+
+ /*
+ * If hw is not ready (or detached) and we get an
+ * interrupt, or if we have no interrupts pending
+ * (that means it's not for us) skip it.
+ *
+ * NOTE: Group 0/1 PCI interface registers are not
+ * supported on WiSOCs, so we can't check for pending
+ * interrupts (ISR belongs to another register group
+ * so we are ok).
+ */
+ if (unlikely(test_bit(ATH_STAT_INVALID, ah->status) ||
+ ((ath5k_get_bus_type(ah) != ATH_AHB) &&
+ !ath5k_hw_is_intr_pending(ah))))
+ return IRQ_NONE;
+
+ /** Main loop **/
+ do {
+ ath5k_hw_get_isr(ah, &status); /* NB: clears IRQ too */
+
+ ATH5K_DBG(ah, ATH5K_DEBUG_INTR, "status 0x%x/0x%x\n",
+ status, ah->imask);
+
+ /*
+ * Fatal hw error -> Log and reset
+ *
+ * Fatal errors are unrecoverable so we have to
+ * reset the card. These errors include bus and
+ * dma errors.
+ */
+ if (unlikely(status & AR5K_INT_FATAL)) {
+
+ ATH5K_DBG(ah, ATH5K_DEBUG_RESET,
+ "fatal int, resetting\n");
+ ieee80211_queue_work(ah->hw, &ah->reset_work);
+
+ /*
+ * RX Overrun -> Count and reset if needed
+ *
+ * Receive buffers are full. Either the bus is busy or
+ * the CPU is not fast enough to process all received
+ * frames.
+ */
+ } else if (unlikely(status & AR5K_INT_RXORN)) {
+
+ /*
+ * Older chipsets need a reset to come out of this
+ * condition, but we treat it as RX for newer chips.
+ * We don't know exactly which versions need a reset
+ * this guess is copied from the HAL.
+ */
+ ah->stats.rxorn_intr++;
+
+ if (ah->ah_mac_srev < AR5K_SREV_AR5212) {
+ ATH5K_DBG(ah, ATH5K_DEBUG_RESET,
+ "rx overrun, resetting\n");
+ ieee80211_queue_work(ah->hw, &ah->reset_work);
+ } else
+ ath5k_schedule_rx(ah);
+
+ } else {
+
+ /* Software Beacon Alert -> Schedule beacon tasklet */
+ if (status & AR5K_INT_SWBA)
+ tasklet_hi_schedule(&ah->beacontq);
+
+ /*
+ * No more RX descriptors -> Just count
+ *
+ * NB: the hardware should re-read the link when
+ * RXE bit is written, but it doesn't work at
+ * least on older hardware revs.
+ */
+ if (status & AR5K_INT_RXEOL)
+ ah->stats.rxeol_intr++;
+
+
+ /* TX Underrun -> Bump tx trigger level */
+ if (status & AR5K_INT_TXURN)
+ ath5k_hw_update_tx_triglevel(ah, true);
+
+ /* RX -> Schedule rx tasklet */
+ if (status & (AR5K_INT_RXOK | AR5K_INT_RXERR))
+ ath5k_schedule_rx(ah);
+
+ /* TX -> Schedule tx tasklet */
+ if (status & (AR5K_INT_TXOK
+ | AR5K_INT_TXDESC
+ | AR5K_INT_TXERR
+ | AR5K_INT_TXEOL))
+ ath5k_schedule_tx(ah);
+
+ /* Missed beacon -> TODO
+ if (status & AR5K_INT_BMISS)
+ */
+
+ /* MIB event -> Update counters and notify ANI */
+ if (status & AR5K_INT_MIB) {
+ ah->stats.mib_intr++;
+ ath5k_hw_update_mib_counters(ah);
+ ath5k_ani_mib_intr(ah);
+ }
+
+ /* GPIO -> Notify RFKill layer */
+ if (status & AR5K_INT_GPIO)
+ tasklet_schedule(&ah->rf_kill.toggleq);
+
+ }
+
+ if (ath5k_get_bus_type(ah) == ATH_AHB)
+ break;
+
+ } while (ath5k_hw_is_intr_pending(ah) && --counter > 0);
+
+ /*
+ * Until we handle rx/tx interrupts mask them on IMR
+ *
+ * NOTE: ah->(rx/tx)_pending are set when scheduling the tasklets
+ * and unset after we 've handled the interrupts.
+ */
+ if (ah->rx_pending || ah->tx_pending)
+ ath5k_set_current_imask(ah);
+
+ if (unlikely(!counter))
+ ATH5K_WARN(ah, "too many interrupts, giving up for now\n");
+
+ /* Fire up calibration poll */
+ ath5k_intr_calibration_poll(ah);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * Periodically recalibrate the PHY to account
+ * for temperature/environment changes.
+ */
+static void
+ath5k_calibrate_work(struct work_struct *work)
+{
+ struct ath5k_hw *ah = container_of(work, struct ath5k_hw,
+ calib_work);
+
+ /* Should we run a full calibration ? */
+ if (time_is_before_eq_jiffies(ah->ah_cal_next_full)) {
+
+ ah->ah_cal_next_full = jiffies +
+ msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_FULL);
+ ah->ah_cal_mask |= AR5K_CALIBRATION_FULL;
+
+ ATH5K_DBG(ah, ATH5K_DEBUG_CALIBRATE,
+ "running full calibration\n");
+
+ if (ath5k_hw_gainf_calibrate(ah) == AR5K_RFGAIN_NEED_CHANGE) {
+ /*
+ * Rfgain is out of bounds, reset the chip
+ * to load new gain values.
+ */
+ ATH5K_DBG(ah, ATH5K_DEBUG_RESET,
+ "got new rfgain, resetting\n");
+ ieee80211_queue_work(ah->hw, &ah->reset_work);
+ }
+ } else
+ ah->ah_cal_mask |= AR5K_CALIBRATION_SHORT;
+
+
+ ATH5K_DBG(ah, ATH5K_DEBUG_CALIBRATE, "channel %u/%x\n",
+ ieee80211_frequency_to_channel(ah->curchan->center_freq),
+ ah->curchan->hw_value);
+
+ if (ath5k_hw_phy_calibrate(ah, ah->curchan))
+ ATH5K_ERR(ah, "calibration of channel %u failed\n",
+ ieee80211_frequency_to_channel(
+ ah->curchan->center_freq));
+
+ /* Clear calibration flags */
+ if (ah->ah_cal_mask & AR5K_CALIBRATION_FULL)
+ ah->ah_cal_mask &= ~AR5K_CALIBRATION_FULL;
+ else if (ah->ah_cal_mask & AR5K_CALIBRATION_SHORT)
+ ah->ah_cal_mask &= ~AR5K_CALIBRATION_SHORT;
+}
+
+
+static void
+ath5k_tasklet_ani(struct tasklet_struct *t)
+{
+ struct ath5k_hw *ah = from_tasklet(ah, t, ani_tasklet);
+
+ ah->ah_cal_mask |= AR5K_CALIBRATION_ANI;
+ ath5k_ani_calibration(ah);
+ ah->ah_cal_mask &= ~AR5K_CALIBRATION_ANI;
+}
+
+
+static void
+ath5k_tx_complete_poll_work(struct work_struct *work)
+{
+ struct ath5k_hw *ah = container_of(work, struct ath5k_hw,
+ tx_complete_work.work);
+ struct ath5k_txq *txq;
+ int i;
+ bool needreset = false;
+
+ if (!test_bit(ATH_STAT_STARTED, ah->status))
+ return;
+
+ mutex_lock(&ah->lock);
+
+ for (i = 0; i < ARRAY_SIZE(ah->txqs); i++) {
+ if (ah->txqs[i].setup) {
+ txq = &ah->txqs[i];
+ spin_lock_bh(&txq->lock);
+ if (txq->txq_len > 1) {
+ if (txq->txq_poll_mark) {
+ ATH5K_DBG(ah, ATH5K_DEBUG_XMIT,
+ "TX queue stuck %d\n",
+ txq->qnum);
+ needreset = true;
+ txq->txq_stuck++;
+ spin_unlock_bh(&txq->lock);
+ break;
+ } else {
+ txq->txq_poll_mark = true;
+ }
+ }
+ spin_unlock_bh(&txq->lock);
+ }
+ }
+
+ if (needreset) {
+ ATH5K_DBG(ah, ATH5K_DEBUG_RESET,
+ "TX queues stuck, resetting\n");
+ ath5k_reset(ah, NULL, true);
+ }
+
+ mutex_unlock(&ah->lock);
+
+ ieee80211_queue_delayed_work(ah->hw, &ah->tx_complete_work,
+ msecs_to_jiffies(ATH5K_TX_COMPLETE_POLL_INT));
+}
+
+
+/*************************\
+* Initialization routines *
+\*************************/
+
+static const struct ieee80211_iface_limit if_limits[] = {
+ { .max = 2048, .types = BIT(NL80211_IFTYPE_STATION) },
+ { .max = 4, .types =
+#ifdef CONFIG_MAC80211_MESH
+ BIT(NL80211_IFTYPE_MESH_POINT) |
+#endif
+ BIT(NL80211_IFTYPE_AP) },
+};
+
+static const struct ieee80211_iface_combination if_comb = {
+ .limits = if_limits,
+ .n_limits = ARRAY_SIZE(if_limits),
+ .max_interfaces = 2048,
+ .num_different_channels = 1,
+};
+
+int
+ath5k_init_ah(struct ath5k_hw *ah, const struct ath_bus_ops *bus_ops)
+{
+ struct ieee80211_hw *hw = ah->hw;
+ struct ath_common *common;
+ int ret;
+ int csz;
+
+ /* Initialize driver private data */
+ SET_IEEE80211_DEV(hw, ah->dev);
+ ieee80211_hw_set(hw, SUPPORTS_RC_TABLE);
+ ieee80211_hw_set(hw, REPORTS_TX_ACK_STATUS);
+ ieee80211_hw_set(hw, MFP_CAPABLE);
+ ieee80211_hw_set(hw, SIGNAL_DBM);
+ ieee80211_hw_set(hw, RX_INCLUDES_FCS);
+ ieee80211_hw_set(hw, HOST_BROADCAST_PS_BUFFERING);
+
+ hw->wiphy->interface_modes =
+ BIT(NL80211_IFTYPE_AP) |
+ BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_ADHOC) |
+ BIT(NL80211_IFTYPE_MESH_POINT);
+
+ hw->wiphy->iface_combinations = &if_comb;
+ hw->wiphy->n_iface_combinations = 1;
+
+ /* SW support for IBSS_RSN is provided by mac80211 */
+ hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
+
+ hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_5_10_MHZ;
+
+ /* both antennas can be configured as RX or TX */
+ hw->wiphy->available_antennas_tx = 0x3;
+ hw->wiphy->available_antennas_rx = 0x3;
+
+ hw->extra_tx_headroom = 2;
+
+ wiphy_ext_feature_set(hw->wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST);
+
+ /*
+ * Mark the device as detached to avoid processing
+ * interrupts until setup is complete.
+ */
+ __set_bit(ATH_STAT_INVALID, ah->status);
+
+ ah->opmode = NL80211_IFTYPE_STATION;
+ ah->bintval = 1000;
+ mutex_init(&ah->lock);
+ spin_lock_init(&ah->rxbuflock);
+ spin_lock_init(&ah->txbuflock);
+ spin_lock_init(&ah->block);
+ spin_lock_init(&ah->irqlock);
+
+ /* Setup interrupt handler */
+ ret = request_irq(ah->irq, ath5k_intr, IRQF_SHARED, "ath", ah);
+ if (ret) {
+ ATH5K_ERR(ah, "request_irq failed\n");
+ goto err;
+ }
+
+ common = ath5k_hw_common(ah);
+ common->ops = &ath5k_common_ops;
+ common->bus_ops = bus_ops;
+ common->ah = ah;
+ common->hw = hw;
+ common->priv = ah;
+ common->clockrate = 40;
+
+ /*
+ * Cache line size is used to size and align various
+ * structures used to communicate with the hardware.
+ */
+ ath5k_read_cachesize(common, &csz);
+ common->cachelsz = csz << 2; /* convert to bytes */
+
+ spin_lock_init(&common->cc_lock);
+
+ /* Initialize device */
+ ret = ath5k_hw_init(ah);
+ if (ret)
+ goto err_irq;
+
+ /* Set up multi-rate retry capabilities */
+ if (ah->ah_capabilities.cap_has_mrr_support) {
+ hw->max_rates = 4;
+ hw->max_rate_tries = max(AR5K_INIT_RETRY_SHORT,
+ AR5K_INIT_RETRY_LONG);
+ }
+
+ hw->vif_data_size = sizeof(struct ath5k_vif);
+
+ /* Finish private driver data initialization */
+ ret = ath5k_init(hw);
+ if (ret)
+ goto err_ah;
+
+ ATH5K_INFO(ah, "Atheros AR%s chip found (MAC: 0x%x, PHY: 0x%x)\n",
+ ath5k_chip_name(AR5K_VERSION_MAC, ah->ah_mac_srev),
+ ah->ah_mac_srev,
+ ah->ah_phy_revision);
+
+ if (!ah->ah_single_chip) {
+ /* Single chip radio (!RF5111) */
+ if (ah->ah_radio_5ghz_revision &&
+ !ah->ah_radio_2ghz_revision) {
+ /* No 5GHz support -> report 2GHz radio */
+ if (!test_bit(AR5K_MODE_11A,
+ ah->ah_capabilities.cap_mode)) {
+ ATH5K_INFO(ah, "RF%s 2GHz radio found (0x%x)\n",
+ ath5k_chip_name(AR5K_VERSION_RAD,
+ ah->ah_radio_5ghz_revision),
+ ah->ah_radio_5ghz_revision);
+ /* No 2GHz support (5110 and some
+ * 5GHz only cards) -> report 5GHz radio */
+ } else if (!test_bit(AR5K_MODE_11B,
+ ah->ah_capabilities.cap_mode)) {
+ ATH5K_INFO(ah, "RF%s 5GHz radio found (0x%x)\n",
+ ath5k_chip_name(AR5K_VERSION_RAD,
+ ah->ah_radio_5ghz_revision),
+ ah->ah_radio_5ghz_revision);
+ /* Multiband radio */
+ } else {
+ ATH5K_INFO(ah, "RF%s multiband radio found"
+ " (0x%x)\n",
+ ath5k_chip_name(AR5K_VERSION_RAD,
+ ah->ah_radio_5ghz_revision),
+ ah->ah_radio_5ghz_revision);
+ }
+ }
+ /* Multi chip radio (RF5111 - RF2111) ->
+ * report both 2GHz/5GHz radios */
+ else if (ah->ah_radio_5ghz_revision &&
+ ah->ah_radio_2ghz_revision) {
+ ATH5K_INFO(ah, "RF%s 5GHz radio found (0x%x)\n",
+ ath5k_chip_name(AR5K_VERSION_RAD,
+ ah->ah_radio_5ghz_revision),
+ ah->ah_radio_5ghz_revision);
+ ATH5K_INFO(ah, "RF%s 2GHz radio found (0x%x)\n",
+ ath5k_chip_name(AR5K_VERSION_RAD,
+ ah->ah_radio_2ghz_revision),
+ ah->ah_radio_2ghz_revision);
+ }
+ }
+
+ ath5k_debug_init_device(ah);
+
+ /* ready to process interrupts */
+ __clear_bit(ATH_STAT_INVALID, ah->status);
+
+ return 0;
+err_ah:
+ ath5k_hw_deinit(ah);
+err_irq:
+ free_irq(ah->irq, ah);
+err:
+ return ret;
+}
+
+static int
+ath5k_stop_locked(struct ath5k_hw *ah)
+{
+
+ ATH5K_DBG(ah, ATH5K_DEBUG_RESET, "invalid %u\n",
+ test_bit(ATH_STAT_INVALID, ah->status));
+
+ /*
+ * Shutdown the hardware and driver:
+ * stop output from above
+ * disable interrupts
+ * turn off timers
+ * turn off the radio
+ * clear transmit machinery
+ * clear receive machinery
+ * drain and release tx queues
+ * reclaim beacon resources
+ * power down hardware
+ *
+ * Note that some of this work is not possible if the
+ * hardware is gone (invalid).
+ */
+ ieee80211_stop_queues(ah->hw);
+
+ if (!test_bit(ATH_STAT_INVALID, ah->status)) {
+ ath5k_led_off(ah);
+ ath5k_hw_set_imr(ah, 0);
+ synchronize_irq(ah->irq);
+ ath5k_rx_stop(ah);
+ ath5k_hw_dma_stop(ah);
+ ath5k_drain_tx_buffs(ah);
+ ath5k_hw_phy_disable(ah);
+ }
+
+ return 0;
+}
+
+int ath5k_start(struct ieee80211_hw *hw)
+{
+ struct ath5k_hw *ah = hw->priv;
+ struct ath_common *common = ath5k_hw_common(ah);
+ int ret, i;
+
+ mutex_lock(&ah->lock);
+
+ ATH5K_DBG(ah, ATH5K_DEBUG_RESET, "mode %d\n", ah->opmode);
+
+ /*
+ * Stop anything previously setup. This is safe
+ * no matter this is the first time through or not.
+ */
+ ath5k_stop_locked(ah);
+
+ /*
+ * The basic interface to setting the hardware in a good
+ * state is ``reset''. On return the hardware is known to
+ * be powered up and with interrupts disabled. This must
+ * be followed by initialization of the appropriate bits
+ * and then setup of the interrupt mask.
+ */
+ ah->curchan = ah->hw->conf.chandef.chan;
+ ah->imask = AR5K_INT_RXOK
+ | AR5K_INT_RXERR
+ | AR5K_INT_RXEOL
+ | AR5K_INT_RXORN
+ | AR5K_INT_TXDESC
+ | AR5K_INT_TXEOL
+ | AR5K_INT_FATAL
+ | AR5K_INT_GLOBAL
+ | AR5K_INT_MIB;
+
+ ret = ath5k_reset(ah, NULL, false);
+ if (ret)
+ goto done;
+
+ if (!ath5k_modparam_no_hw_rfkill_switch)
+ ath5k_rfkill_hw_start(ah);
+
+ /*
+ * Reset the key cache since some parts do not reset the
+ * contents on initial power up or resume from suspend.
+ */
+ for (i = 0; i < common->keymax; i++)
+ ath_hw_keyreset(common, (u16) i);
+
+ /* Use higher rates for acks instead of base
+ * rate */
+ ah->ah_ack_bitrate_high = true;
+
+ for (i = 0; i < ARRAY_SIZE(ah->bslot); i++)
+ ah->bslot[i] = NULL;
+
+ ret = 0;
+done:
+ mutex_unlock(&ah->lock);
+
+ set_bit(ATH_STAT_STARTED, ah->status);
+ ieee80211_queue_delayed_work(ah->hw, &ah->tx_complete_work,
+ msecs_to_jiffies(ATH5K_TX_COMPLETE_POLL_INT));
+
+ return ret;
+}
+
+static void ath5k_stop_tasklets(struct ath5k_hw *ah)
+{
+ ah->rx_pending = false;
+ ah->tx_pending = false;
+ tasklet_kill(&ah->rxtq);
+ tasklet_kill(&ah->txtq);
+ tasklet_kill(&ah->beacontq);
+ tasklet_kill(&ah->ani_tasklet);
+}
+
+/*
+ * Stop the device, grabbing the top-level lock to protect
+ * against concurrent entry through ath5k_init (which can happen
+ * if another thread does a system call and the thread doing the
+ * stop is preempted).
+ */
+void ath5k_stop(struct ieee80211_hw *hw)
+{
+ struct ath5k_hw *ah = hw->priv;
+ int ret;
+
+ mutex_lock(&ah->lock);
+ ret = ath5k_stop_locked(ah);
+ if (ret == 0 && !test_bit(ATH_STAT_INVALID, ah->status)) {
+ /*
+ * Don't set the card in full sleep mode!
+ *
+ * a) When the device is in this state it must be carefully
+ * woken up or references to registers in the PCI clock
+ * domain may freeze the bus (and system). This varies
+ * by chip and is mostly an issue with newer parts
+ * (madwifi sources mentioned srev >= 0x78) that go to
+ * sleep more quickly.
+ *
+ * b) On older chips full sleep results a weird behaviour
+ * during wakeup. I tested various cards with srev < 0x78
+ * and they don't wake up after module reload, a second
+ * module reload is needed to bring the card up again.
+ *
+ * Until we figure out what's going on don't enable
+ * full chip reset on any chip (this is what Legacy HAL
+ * and Sam's HAL do anyway). Instead Perform a full reset
+ * on the device (same as initial state after attach) and
+ * leave it idle (keep MAC/BB on warm reset) */
+ ret = ath5k_hw_on_hold(ah);
+
+ ATH5K_DBG(ah, ATH5K_DEBUG_RESET,
+ "putting device to sleep\n");
+ }
+
+ mutex_unlock(&ah->lock);
+
+ ath5k_stop_tasklets(ah);
+
+ clear_bit(ATH_STAT_STARTED, ah->status);
+ cancel_delayed_work_sync(&ah->tx_complete_work);
+
+ if (!ath5k_modparam_no_hw_rfkill_switch)
+ ath5k_rfkill_hw_stop(ah);
+}
+
+/*
+ * Reset the hardware. If chan is not NULL, then also pause rx/tx
+ * and change to the given channel.
+ *
+ * This should be called with ah->lock.
+ */
+static int
+ath5k_reset(struct ath5k_hw *ah, struct ieee80211_channel *chan,
+ bool skip_pcu)
+{
+ struct ath_common *common = ath5k_hw_common(ah);
+ int ret, ani_mode;
+ bool fast = chan && modparam_fastchanswitch ? 1 : 0;
+
+ ATH5K_DBG(ah, ATH5K_DEBUG_RESET, "resetting\n");
+
+ __set_bit(ATH_STAT_RESET, ah->status);
+
+ ath5k_hw_set_imr(ah, 0);
+ synchronize_irq(ah->irq);
+ ath5k_stop_tasklets(ah);
+
+ /* Save ani mode and disable ANI during
+ * reset. If we don't we might get false
+ * PHY error interrupts. */
+ ani_mode = ah->ani_state.ani_mode;
+ ath5k_ani_init(ah, ATH5K_ANI_MODE_OFF);
+
+ /* We are going to empty hw queues
+ * so we should also free any remaining
+ * tx buffers */
+ ath5k_drain_tx_buffs(ah);
+
+ /* Stop PCU */
+ ath5k_hw_stop_rx_pcu(ah);
+
+ /* Stop DMA
+ *
+ * Note: If DMA didn't stop continue
+ * since only a reset will fix it.
+ */
+ ret = ath5k_hw_dma_stop(ah);
+
+ /* RF Bus grant won't work if we have pending
+ * frames
+ */
+ if (ret && fast) {
+ ATH5K_DBG(ah, ATH5K_DEBUG_RESET,
+ "DMA didn't stop, falling back to normal reset\n");
+ fast = false;
+ }
+
+ if (chan)
+ ah->curchan = chan;
+
+ ret = ath5k_hw_reset(ah, ah->opmode, ah->curchan, fast, skip_pcu);
+ if (ret) {
+ ATH5K_ERR(ah, "can't reset hardware (%d)\n", ret);
+ goto err;
+ }
+
+ ret = ath5k_rx_start(ah);
+ if (ret) {
+ ATH5K_ERR(ah, "can't start recv logic\n");
+ goto err;
+ }
+
+ ath5k_ani_init(ah, ani_mode);
+
+ /*
+ * Set calibration intervals
+ *
+ * Note: We don't need to run calibration imediately
+ * since some initial calibration is done on reset
+ * even for fast channel switching. Also on scanning
+ * this will get set again and again and it won't get
+ * executed unless we connect somewhere and spend some
+ * time on the channel (that's what calibration needs
+ * anyway to be accurate).
+ */
+ ah->ah_cal_next_full = jiffies +
+ msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_FULL);
+ ah->ah_cal_next_ani = jiffies +
+ msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_ANI);
+ ah->ah_cal_next_short = jiffies +
+ msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_SHORT);
+
+ ewma_beacon_rssi_init(&ah->ah_beacon_rssi_avg);
+
+ /* clear survey data and cycle counters */
+ memset(&ah->survey, 0, sizeof(ah->survey));
+ spin_lock_bh(&common->cc_lock);
+ ath_hw_cycle_counters_update(common);
+ memset(&common->cc_survey, 0, sizeof(common->cc_survey));
+ memset(&common->cc_ani, 0, sizeof(common->cc_ani));
+ spin_unlock_bh(&common->cc_lock);
+
+ /*
+ * Change channels and update the h/w rate map if we're switching;
+ * e.g. 11a to 11b/g.
+ *
+ * We may be doing a reset in response to an ioctl that changes the
+ * channel so update any state that might change as a result.
+ *
+ * XXX needed?
+ */
+/* ath5k_chan_change(ah, c); */
+
+ __clear_bit(ATH_STAT_RESET, ah->status);
+
+ ath5k_beacon_config(ah);
+ /* intrs are enabled by ath5k_beacon_config */
+
+ ieee80211_wake_queues(ah->hw);
+
+ return 0;
+err:
+ return ret;
+}
+
+static void ath5k_reset_work(struct work_struct *work)
+{
+ struct ath5k_hw *ah = container_of(work, struct ath5k_hw,
+ reset_work);
+
+ mutex_lock(&ah->lock);
+ ath5k_reset(ah, NULL, true);
+ mutex_unlock(&ah->lock);
+}
+
+static int
+ath5k_init(struct ieee80211_hw *hw)
+{
+
+ struct ath5k_hw *ah = hw->priv;
+ struct ath_regulatory *regulatory = ath5k_hw_regulatory(ah);
+ struct ath5k_txq *txq;
+ u8 mac[ETH_ALEN] = {};
+ int ret;
+
+
+ /*
+ * Collect the channel list. The 802.11 layer
+ * is responsible for filtering this list based
+ * on settings like the phy mode and regulatory
+ * domain restrictions.
+ */
+ ret = ath5k_setup_bands(hw);
+ if (ret) {
+ ATH5K_ERR(ah, "can't get channels\n");
+ goto err;
+ }
+
+ /*
+ * Allocate tx+rx descriptors and populate the lists.
+ */
+ ret = ath5k_desc_alloc(ah);
+ if (ret) {
+ ATH5K_ERR(ah, "can't allocate descriptors\n");
+ goto err;
+ }
+
+ /*
+ * Allocate hardware transmit queues: one queue for
+ * beacon frames and one data queue for each QoS
+ * priority. Note that hw functions handle resetting
+ * these queues at the needed time.
+ */
+ ret = ath5k_beaconq_setup(ah);
+ if (ret < 0) {
+ ATH5K_ERR(ah, "can't setup a beacon xmit queue\n");
+ goto err_desc;
+ }
+ ah->bhalq = ret;
+ ah->cabq = ath5k_txq_setup(ah, AR5K_TX_QUEUE_CAB, 0);
+ if (IS_ERR(ah->cabq)) {
+ ATH5K_ERR(ah, "can't setup cab queue\n");
+ ret = PTR_ERR(ah->cabq);
+ goto err_bhal;
+ }
+
+ /* 5211 and 5212 usually support 10 queues but we better rely on the
+ * capability information */
+ if (ah->ah_capabilities.cap_queues.q_tx_num >= 6) {
+ /* This order matches mac80211's queue priority, so we can
+ * directly use the mac80211 queue number without any mapping */
+ txq = ath5k_txq_setup(ah, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_VO);
+ if (IS_ERR(txq)) {
+ ATH5K_ERR(ah, "can't setup xmit queue\n");
+ ret = PTR_ERR(txq);
+ goto err_queues;
+ }
+ txq = ath5k_txq_setup(ah, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_VI);
+ if (IS_ERR(txq)) {
+ ATH5K_ERR(ah, "can't setup xmit queue\n");
+ ret = PTR_ERR(txq);
+ goto err_queues;
+ }
+ txq = ath5k_txq_setup(ah, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BE);
+ if (IS_ERR(txq)) {
+ ATH5K_ERR(ah, "can't setup xmit queue\n");
+ ret = PTR_ERR(txq);
+ goto err_queues;
+ }
+ txq = ath5k_txq_setup(ah, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BK);
+ if (IS_ERR(txq)) {
+ ATH5K_ERR(ah, "can't setup xmit queue\n");
+ ret = PTR_ERR(txq);
+ goto err_queues;
+ }
+ hw->queues = 4;
+ } else {
+ /* older hardware (5210) can only support one data queue */
+ txq = ath5k_txq_setup(ah, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BE);
+ if (IS_ERR(txq)) {
+ ATH5K_ERR(ah, "can't setup xmit queue\n");
+ ret = PTR_ERR(txq);
+ goto err_queues;
+ }
+ hw->queues = 1;
+ }
+
+ tasklet_setup(&ah->rxtq, ath5k_tasklet_rx);
+ tasklet_setup(&ah->txtq, ath5k_tasklet_tx);
+ tasklet_setup(&ah->beacontq, ath5k_tasklet_beacon);
+ tasklet_setup(&ah->ani_tasklet, ath5k_tasklet_ani);
+
+ INIT_WORK(&ah->reset_work, ath5k_reset_work);
+ INIT_WORK(&ah->calib_work, ath5k_calibrate_work);
+ INIT_DELAYED_WORK(&ah->tx_complete_work, ath5k_tx_complete_poll_work);
+
+ ret = ath5k_hw_common(ah)->bus_ops->eeprom_read_mac(ah, mac);
+ if (ret) {
+ ATH5K_ERR(ah, "unable to read address from EEPROM\n");
+ goto err_queues;
+ }
+
+ SET_IEEE80211_PERM_ADDR(hw, mac);
+ /* All MAC address bits matter for ACKs */
+ ath5k_update_bssid_mask_and_opmode(ah, NULL);
+
+ regulatory->current_rd = ah->ah_capabilities.cap_eeprom.ee_regdomain;
+ ret = ath_regd_init(regulatory, hw->wiphy, ath5k_reg_notifier);
+ if (ret) {
+ ATH5K_ERR(ah, "can't initialize regulatory system\n");
+ goto err_queues;
+ }
+
+ ret = ieee80211_register_hw(hw);
+ if (ret) {
+ ATH5K_ERR(ah, "can't register ieee80211 hw\n");
+ goto err_queues;
+ }
+
+ if (!ath_is_world_regd(regulatory))
+ regulatory_hint(hw->wiphy, regulatory->alpha2);
+
+ ath5k_init_leds(ah);
+
+ ath5k_sysfs_register(ah);
+
+ return 0;
+err_queues:
+ ath5k_txq_release(ah);
+err_bhal:
+ ath5k_hw_release_tx_queue(ah, ah->bhalq);
+err_desc:
+ ath5k_desc_free(ah);
+err:
+ return ret;
+}
+
+void
+ath5k_deinit_ah(struct ath5k_hw *ah)
+{
+ struct ieee80211_hw *hw = ah->hw;
+
+ /*
+ * NB: the order of these is important:
+ * o call the 802.11 layer before detaching ath5k_hw to
+ * ensure callbacks into the driver to delete global
+ * key cache entries can be handled
+ * o reclaim the tx queue data structures after calling
+ * the 802.11 layer as we'll get called back to reclaim
+ * node state and potentially want to use them
+ * o to cleanup the tx queues the hal is called, so detach
+ * it last
+ * XXX: ??? detach ath5k_hw ???
+ * Other than that, it's straightforward...
+ */
+ ieee80211_unregister_hw(hw);
+ ath5k_desc_free(ah);
+ ath5k_txq_release(ah);
+ ath5k_hw_release_tx_queue(ah, ah->bhalq);
+ ath5k_unregister_leds(ah);
+
+ ath5k_sysfs_unregister(ah);
+ /*
+ * NB: can't reclaim these until after ieee80211_ifdetach
+ * returns because we'll get called back to reclaim node
+ * state and potentially want to use them.
+ */
+ ath5k_hw_deinit(ah);
+ free_irq(ah->irq, ah);
+}
+
+bool
+ath5k_any_vif_assoc(struct ath5k_hw *ah)
+{
+ struct ath5k_vif_iter_data iter_data;
+ iter_data.hw_macaddr = NULL;
+ iter_data.any_assoc = false;
+ iter_data.need_set_hw_addr = false;
+ iter_data.found_active = true;
+
+ ieee80211_iterate_active_interfaces_atomic(
+ ah->hw, IEEE80211_IFACE_ITER_RESUME_ALL,
+ ath5k_vif_iter, &iter_data);
+ return iter_data.any_assoc;
+}
+
+void
+ath5k_set_beacon_filter(struct ieee80211_hw *hw, bool enable)
+{
+ struct ath5k_hw *ah = hw->priv;
+ u32 rfilt;
+ rfilt = ath5k_hw_get_rx_filter(ah);
+ if (enable)
+ rfilt |= AR5K_RX_FILTER_BEACON;
+ else
+ rfilt &= ~AR5K_RX_FILTER_BEACON;
+ ath5k_hw_set_rx_filter(ah, rfilt);
+ ah->filter_flags = rfilt;
+}
+
+void _ath5k_printk(const struct ath5k_hw *ah, const char *level,
+ const char *fmt, ...)
+{
+ struct va_format vaf;
+ va_list args;
+
+ va_start(args, fmt);
+
+ vaf.fmt = fmt;
+ vaf.va = &args;
+
+ if (ah && ah->hw)
+ printk("%s" pr_fmt("%s: %pV"),
+ level, wiphy_name(ah->hw->wiphy), &vaf);
+ else
+ printk("%s" pr_fmt("%pV"), level, &vaf);
+
+ va_end(args);
+}
diff --git a/drivers/net/wireless/ath/ath5k/base.h b/drivers/net/wireless/ath/ath5k/base.h
new file mode 100644
index 000000000..97469d0fb
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/base.h
@@ -0,0 +1,121 @@
+/*-
+ * Copyright (c) 2002-2007 Sam Leffler, Errno Consulting
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
+ * redistribution must be conditioned upon including a substantially
+ * similar Disclaimer requirement for further binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
+ * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
+ * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
+ * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ * THE POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+
+/*
+ * Definitions for the Atheros Wireless LAN controller driver.
+ */
+#ifndef _DEV_ATH5K_BASE_H
+#define _DEV_ATH5K_BASE_H
+
+struct ieee80211_vif;
+struct ieee80211_hw;
+struct ath5k_hw;
+struct ath5k_txq;
+struct ieee80211_channel;
+struct ath_bus_ops;
+struct ieee80211_tx_control;
+enum nl80211_iftype;
+
+enum ath5k_srev_type {
+ AR5K_VERSION_MAC,
+ AR5K_VERSION_RAD,
+};
+
+struct ath5k_srev_name {
+ const char *sr_name;
+ enum ath5k_srev_type sr_type;
+ u_int sr_val;
+};
+
+struct ath5k_buf {
+ struct list_head list;
+ struct ath5k_desc *desc; /* virtual addr of desc */
+ dma_addr_t daddr; /* physical addr of desc */
+ struct sk_buff *skb; /* skbuff for buf */
+ dma_addr_t skbaddr; /* physical addr of skb data */
+ struct ieee80211_tx_rate rates[4]; /* number of multi-rate stages */
+};
+
+struct ath5k_vif {
+ bool assoc; /* are we associated or not */
+ enum nl80211_iftype opmode;
+ int bslot;
+ struct ath5k_buf *bbuf; /* beacon buffer */
+};
+
+struct ath5k_vif_iter_data {
+ const u8 *hw_macaddr;
+ u8 mask[ETH_ALEN];
+ u8 active_mac[ETH_ALEN]; /* first active MAC */
+ bool need_set_hw_addr;
+ bool found_active;
+ bool any_assoc;
+ enum nl80211_iftype opmode;
+ int n_stas;
+};
+
+void ath5k_vif_iter(void *data, u8 *mac, struct ieee80211_vif *vif);
+bool ath5k_any_vif_assoc(struct ath5k_hw *ah);
+
+int ath5k_start(struct ieee80211_hw *hw);
+void ath5k_stop(struct ieee80211_hw *hw);
+
+void ath5k_beacon_update_timers(struct ath5k_hw *ah, u64 bc_tsf);
+int ath5k_beacon_update(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
+void ath5k_beacon_config(struct ath5k_hw *ah);
+void ath5k_set_beacon_filter(struct ieee80211_hw *hw, bool enable);
+
+void ath5k_update_bssid_mask_and_opmode(struct ath5k_hw *ah,
+ struct ieee80211_vif *vif);
+int ath5k_chan_set(struct ath5k_hw *ah, struct cfg80211_chan_def *chandef);
+void ath5k_txbuf_free_skb(struct ath5k_hw *ah, struct ath5k_buf *bf);
+void ath5k_rxbuf_free_skb(struct ath5k_hw *ah, struct ath5k_buf *bf);
+void ath5k_tx_queue(struct ieee80211_hw *hw, struct sk_buff *skb,
+ struct ath5k_txq *txq, struct ieee80211_tx_control *control);
+
+const char *ath5k_chip_name(enum ath5k_srev_type type, u_int16_t val);
+
+int ath5k_init_ah(struct ath5k_hw *ah, const struct ath_bus_ops *bus_ops);
+void ath5k_deinit_ah(struct ath5k_hw *ah);
+
+/* Check whether BSSID mask is supported */
+#define ath5k_hw_hasbssidmask(_ah) (ah->ah_version == AR5K_AR5212)
+
+/* Check whether virtual EOL is supported */
+#define ath5k_hw_hasveol(_ah) (ah->ah_version != AR5K_AR5210)
+
+#endif /* _DEV_ATH5K_BASE_H */
diff --git a/drivers/net/wireless/ath/ath5k/caps.c b/drivers/net/wireless/ath/ath5k/caps.c
new file mode 100644
index 000000000..994169ad3
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/caps.c
@@ -0,0 +1,154 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/**************\
+* Capabilities *
+\**************/
+
+#include "ath5k.h"
+#include "reg.h"
+#include "debug.h"
+#include "../regd.h"
+
+/*
+ * Fill the capabilities struct
+ * TODO: Merge this with EEPROM code when we are done with it
+ */
+int ath5k_hw_set_capabilities(struct ath5k_hw *ah)
+{
+ struct ath5k_capabilities *caps = &ah->ah_capabilities;
+ u16 ee_header;
+
+ /* Capabilities stored in the EEPROM */
+ ee_header = caps->cap_eeprom.ee_header;
+
+ if (ah->ah_version == AR5K_AR5210) {
+ /*
+ * Set radio capabilities
+ * (The AR5110 only supports the middle 5GHz band)
+ */
+ caps->cap_range.range_5ghz_min = 5120;
+ caps->cap_range.range_5ghz_max = 5430;
+ caps->cap_range.range_2ghz_min = 0;
+ caps->cap_range.range_2ghz_max = 0;
+
+ /* Set supported modes */
+ __set_bit(AR5K_MODE_11A, caps->cap_mode);
+ } else {
+ /*
+ * XXX The transceiver supports frequencies from 4920 to 6100MHz
+ * XXX and from 2312 to 2732MHz. There are problems with the
+ * XXX current ieee80211 implementation because the IEEE
+ * XXX channel mapping does not support negative channel
+ * XXX numbers (2312MHz is channel -19). Of course, this
+ * XXX doesn't matter because these channels are out of the
+ * XXX legal range.
+ */
+
+ /*
+ * Set radio capabilities
+ */
+
+ if (AR5K_EEPROM_HDR_11A(ee_header)) {
+ if (ath_is_49ghz_allowed(caps->cap_eeprom.ee_regdomain))
+ caps->cap_range.range_5ghz_min = 4920;
+ else
+ caps->cap_range.range_5ghz_min = 5005;
+ caps->cap_range.range_5ghz_max = 6100;
+
+ /* Set supported modes */
+ __set_bit(AR5K_MODE_11A, caps->cap_mode);
+ }
+
+ /* Enable 802.11b if a 2GHz capable radio (2111/5112) is
+ * connected */
+ if (AR5K_EEPROM_HDR_11B(ee_header) ||
+ (AR5K_EEPROM_HDR_11G(ee_header) &&
+ ah->ah_version != AR5K_AR5211)) {
+ /* 2312 */
+ caps->cap_range.range_2ghz_min = 2412;
+ caps->cap_range.range_2ghz_max = 2732;
+
+ /* Override 2GHz modes on SoCs that need it
+ * NOTE: cap_needs_2GHz_ovr gets set from
+ * ath_ahb_probe */
+ if (!caps->cap_needs_2GHz_ovr) {
+ if (AR5K_EEPROM_HDR_11B(ee_header))
+ __set_bit(AR5K_MODE_11B,
+ caps->cap_mode);
+
+ if (AR5K_EEPROM_HDR_11G(ee_header) &&
+ ah->ah_version != AR5K_AR5211)
+ __set_bit(AR5K_MODE_11G,
+ caps->cap_mode);
+ }
+ }
+ }
+
+ if ((ah->ah_radio_5ghz_revision & 0xf0) == AR5K_SREV_RAD_2112)
+ __clear_bit(AR5K_MODE_11A, caps->cap_mode);
+
+ /* Set number of supported TX queues */
+ if (ah->ah_version == AR5K_AR5210)
+ caps->cap_queues.q_tx_num = AR5K_NUM_TX_QUEUES_NOQCU;
+ else
+ caps->cap_queues.q_tx_num = AR5K_NUM_TX_QUEUES;
+
+ /* Newer hardware has PHY error counters */
+ if (ah->ah_mac_srev >= AR5K_SREV_AR5213A)
+ caps->cap_has_phyerr_counters = true;
+ else
+ caps->cap_has_phyerr_counters = false;
+
+ /* MACs since AR5212 have MRR support */
+ if (ah->ah_version == AR5K_AR5212)
+ caps->cap_has_mrr_support = true;
+ else
+ caps->cap_has_mrr_support = false;
+
+ return 0;
+}
+
+/*
+ * TODO: Following functions should be part of a new function
+ * set_capability
+ */
+
+int ath5k_hw_enable_pspoll(struct ath5k_hw *ah, u8 *bssid,
+ u16 assoc_id)
+{
+ if (ah->ah_version == AR5K_AR5210) {
+ AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1,
+ AR5K_STA_ID1_NO_PSPOLL | AR5K_STA_ID1_DEFAULT_ANTENNA);
+ return 0;
+ }
+
+ return -EIO;
+}
+
+int ath5k_hw_disable_pspoll(struct ath5k_hw *ah)
+{
+ if (ah->ah_version == AR5K_AR5210) {
+ AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1,
+ AR5K_STA_ID1_NO_PSPOLL | AR5K_STA_ID1_DEFAULT_ANTENNA);
+ return 0;
+ }
+
+ return -EIO;
+}
diff --git a/drivers/net/wireless/ath/ath5k/debug.c b/drivers/net/wireless/ath/ath5k/debug.c
new file mode 100644
index 000000000..4b41160e5
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/debug.c
@@ -0,0 +1,1105 @@
+/*
+ * Copyright (c) 2007-2008 Bruno Randolf <bruno@thinktube.com>
+ *
+ * This file is free software: you may copy, redistribute and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation, either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ *
+ * This file incorporates work covered by the following copyright and
+ * permission notice:
+ *
+ * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting
+ * Copyright (c) 2004-2005 Atheros Communications, Inc.
+ * Copyright (c) 2006 Devicescape Software, Inc.
+ * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com>
+ * Copyright (c) 2007 Luis R. Rodriguez <mcgrof@winlab.rutgers.edu>
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
+ * redistribution must be conditioned upon including a substantially
+ * similar Disclaimer requirement for further binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
+ * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
+ * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
+ * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ * THE POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/export.h>
+#include <linux/moduleparam.h>
+#include <linux/vmalloc.h>
+
+#include <linux/seq_file.h>
+#include <linux/list.h>
+#include "debug.h"
+#include "ath5k.h"
+#include "reg.h"
+#include "base.h"
+
+static unsigned int ath5k_debug;
+module_param_named(debug, ath5k_debug, uint, 0);
+
+
+/* debugfs: registers */
+
+struct reg {
+ const char *name;
+ int addr;
+};
+
+#define REG_STRUCT_INIT(r) { #r, r }
+
+/* just a few random registers, might want to add more */
+static const struct reg regs[] = {
+ REG_STRUCT_INIT(AR5K_CR),
+ REG_STRUCT_INIT(AR5K_RXDP),
+ REG_STRUCT_INIT(AR5K_CFG),
+ REG_STRUCT_INIT(AR5K_IER),
+ REG_STRUCT_INIT(AR5K_BCR),
+ REG_STRUCT_INIT(AR5K_RTSD0),
+ REG_STRUCT_INIT(AR5K_RTSD1),
+ REG_STRUCT_INIT(AR5K_TXCFG),
+ REG_STRUCT_INIT(AR5K_RXCFG),
+ REG_STRUCT_INIT(AR5K_RXJLA),
+ REG_STRUCT_INIT(AR5K_MIBC),
+ REG_STRUCT_INIT(AR5K_TOPS),
+ REG_STRUCT_INIT(AR5K_RXNOFRM),
+ REG_STRUCT_INIT(AR5K_TXNOFRM),
+ REG_STRUCT_INIT(AR5K_RPGTO),
+ REG_STRUCT_INIT(AR5K_RFCNT),
+ REG_STRUCT_INIT(AR5K_MISC),
+ REG_STRUCT_INIT(AR5K_QCUDCU_CLKGT),
+ REG_STRUCT_INIT(AR5K_ISR),
+ REG_STRUCT_INIT(AR5K_PISR),
+ REG_STRUCT_INIT(AR5K_SISR0),
+ REG_STRUCT_INIT(AR5K_SISR1),
+ REG_STRUCT_INIT(AR5K_SISR2),
+ REG_STRUCT_INIT(AR5K_SISR3),
+ REG_STRUCT_INIT(AR5K_SISR4),
+ REG_STRUCT_INIT(AR5K_IMR),
+ REG_STRUCT_INIT(AR5K_PIMR),
+ REG_STRUCT_INIT(AR5K_SIMR0),
+ REG_STRUCT_INIT(AR5K_SIMR1),
+ REG_STRUCT_INIT(AR5K_SIMR2),
+ REG_STRUCT_INIT(AR5K_SIMR3),
+ REG_STRUCT_INIT(AR5K_SIMR4),
+ REG_STRUCT_INIT(AR5K_DCM_ADDR),
+ REG_STRUCT_INIT(AR5K_DCCFG),
+ REG_STRUCT_INIT(AR5K_CCFG),
+ REG_STRUCT_INIT(AR5K_CPC0),
+ REG_STRUCT_INIT(AR5K_CPC1),
+ REG_STRUCT_INIT(AR5K_CPC2),
+ REG_STRUCT_INIT(AR5K_CPC3),
+ REG_STRUCT_INIT(AR5K_CPCOVF),
+ REG_STRUCT_INIT(AR5K_RESET_CTL),
+ REG_STRUCT_INIT(AR5K_SLEEP_CTL),
+ REG_STRUCT_INIT(AR5K_INTPEND),
+ REG_STRUCT_INIT(AR5K_SFR),
+ REG_STRUCT_INIT(AR5K_PCICFG),
+ REG_STRUCT_INIT(AR5K_GPIOCR),
+ REG_STRUCT_INIT(AR5K_GPIODO),
+ REG_STRUCT_INIT(AR5K_SREV),
+};
+
+static void *reg_start(struct seq_file *seq, loff_t *pos)
+{
+ return *pos < ARRAY_SIZE(regs) ? (void *)&regs[*pos] : NULL;
+}
+
+static void reg_stop(struct seq_file *seq, void *p)
+{
+ /* nothing to do */
+}
+
+static void *reg_next(struct seq_file *seq, void *p, loff_t *pos)
+{
+ ++*pos;
+ return *pos < ARRAY_SIZE(regs) ? (void *)&regs[*pos] : NULL;
+}
+
+static int reg_show(struct seq_file *seq, void *p)
+{
+ struct ath5k_hw *ah = seq->private;
+ struct reg *r = p;
+ seq_printf(seq, "%-25s0x%08x\n", r->name,
+ ath5k_hw_reg_read(ah, r->addr));
+ return 0;
+}
+
+static const struct seq_operations registers_sops = {
+ .start = reg_start,
+ .next = reg_next,
+ .stop = reg_stop,
+ .show = reg_show
+};
+
+DEFINE_SEQ_ATTRIBUTE(registers);
+
+/* debugfs: beacons */
+
+static ssize_t read_file_beacon(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ath5k_hw *ah = file->private_data;
+ char buf[500];
+ unsigned int len = 0;
+ unsigned int v;
+ u64 tsf;
+
+ v = ath5k_hw_reg_read(ah, AR5K_BEACON);
+ len += scnprintf(buf + len, sizeof(buf) - len,
+ "%-24s0x%08x\tintval: %d\tTIM: 0x%x\n",
+ "AR5K_BEACON", v, v & AR5K_BEACON_PERIOD,
+ (v & AR5K_BEACON_TIM) >> AR5K_BEACON_TIM_S);
+
+ len += scnprintf(buf + len, sizeof(buf) - len, "%-24s0x%08x\n",
+ "AR5K_LAST_TSTP", ath5k_hw_reg_read(ah, AR5K_LAST_TSTP));
+
+ len += scnprintf(buf + len, sizeof(buf) - len, "%-24s0x%08x\n\n",
+ "AR5K_BEACON_CNT", ath5k_hw_reg_read(ah, AR5K_BEACON_CNT));
+
+ v = ath5k_hw_reg_read(ah, AR5K_TIMER0);
+ len += scnprintf(buf + len, sizeof(buf) - len, "%-24s0x%08x\tTU: %08x\n",
+ "AR5K_TIMER0 (TBTT)", v, v);
+
+ v = ath5k_hw_reg_read(ah, AR5K_TIMER1);
+ len += scnprintf(buf + len, sizeof(buf) - len, "%-24s0x%08x\tTU: %08x\n",
+ "AR5K_TIMER1 (DMA)", v, v >> 3);
+
+ v = ath5k_hw_reg_read(ah, AR5K_TIMER2);
+ len += scnprintf(buf + len, sizeof(buf) - len, "%-24s0x%08x\tTU: %08x\n",
+ "AR5K_TIMER2 (SWBA)", v, v >> 3);
+
+ v = ath5k_hw_reg_read(ah, AR5K_TIMER3);
+ len += scnprintf(buf + len, sizeof(buf) - len, "%-24s0x%08x\tTU: %08x\n",
+ "AR5K_TIMER3 (ATIM)", v, v);
+
+ tsf = ath5k_hw_get_tsf64(ah);
+ len += scnprintf(buf + len, sizeof(buf) - len,
+ "TSF\t\t0x%016llx\tTU: %08x\n",
+ (unsigned long long)tsf, TSF_TO_TU(tsf));
+
+ if (len > sizeof(buf))
+ len = sizeof(buf);
+
+ return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static ssize_t write_file_beacon(struct file *file,
+ const char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ struct ath5k_hw *ah = file->private_data;
+ char buf[20];
+
+ count = min_t(size_t, count, sizeof(buf) - 1);
+ if (copy_from_user(buf, userbuf, count))
+ return -EFAULT;
+
+ buf[count] = '\0';
+ if (strncmp(buf, "disable", 7) == 0) {
+ AR5K_REG_DISABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE);
+ pr_info("debugfs disable beacons\n");
+ } else if (strncmp(buf, "enable", 6) == 0) {
+ AR5K_REG_ENABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE);
+ pr_info("debugfs enable beacons\n");
+ }
+ return count;
+}
+
+static const struct file_operations fops_beacon = {
+ .read = read_file_beacon,
+ .write = write_file_beacon,
+ .open = simple_open,
+ .owner = THIS_MODULE,
+ .llseek = default_llseek,
+};
+
+
+/* debugfs: reset */
+
+static ssize_t write_file_reset(struct file *file,
+ const char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ struct ath5k_hw *ah = file->private_data;
+ ATH5K_DBG(ah, ATH5K_DEBUG_RESET, "debug file triggered reset\n");
+ ieee80211_queue_work(ah->hw, &ah->reset_work);
+ return count;
+}
+
+static const struct file_operations fops_reset = {
+ .write = write_file_reset,
+ .open = simple_open,
+ .owner = THIS_MODULE,
+ .llseek = noop_llseek,
+};
+
+
+/* debugfs: debug level */
+
+static const struct {
+ enum ath5k_debug_level level;
+ const char *name;
+ const char *desc;
+} dbg_info[] = {
+ { ATH5K_DEBUG_RESET, "reset", "reset and initialization" },
+ { ATH5K_DEBUG_INTR, "intr", "interrupt handling" },
+ { ATH5K_DEBUG_MODE, "mode", "mode init/setup" },
+ { ATH5K_DEBUG_XMIT, "xmit", "basic xmit operation" },
+ { ATH5K_DEBUG_BEACON, "beacon", "beacon handling" },
+ { ATH5K_DEBUG_CALIBRATE, "calib", "periodic calibration" },
+ { ATH5K_DEBUG_TXPOWER, "txpower", "transmit power setting" },
+ { ATH5K_DEBUG_LED, "led", "LED management" },
+ { ATH5K_DEBUG_DUMPBANDS, "dumpbands", "dump bands" },
+ { ATH5K_DEBUG_DMA, "dma", "dma start/stop" },
+ { ATH5K_DEBUG_ANI, "ani", "adaptive noise immunity" },
+ { ATH5K_DEBUG_DESC, "desc", "descriptor chains" },
+ { ATH5K_DEBUG_ANY, "all", "show all debug levels" },
+};
+
+static ssize_t read_file_debug(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ath5k_hw *ah = file->private_data;
+ char buf[700];
+ unsigned int len = 0;
+ unsigned int i;
+
+ len += scnprintf(buf + len, sizeof(buf) - len,
+ "DEBUG LEVEL: 0x%08x\n\n", ah->debug.level);
+
+ for (i = 0; i < ARRAY_SIZE(dbg_info) - 1; i++) {
+ len += scnprintf(buf + len, sizeof(buf) - len,
+ "%10s %c 0x%08x - %s\n", dbg_info[i].name,
+ ah->debug.level & dbg_info[i].level ? '+' : ' ',
+ dbg_info[i].level, dbg_info[i].desc);
+ }
+ len += scnprintf(buf + len, sizeof(buf) - len,
+ "%10s %c 0x%08x - %s\n", dbg_info[i].name,
+ ah->debug.level == dbg_info[i].level ? '+' : ' ',
+ dbg_info[i].level, dbg_info[i].desc);
+
+ if (len > sizeof(buf))
+ len = sizeof(buf);
+
+ return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static ssize_t write_file_debug(struct file *file,
+ const char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ struct ath5k_hw *ah = file->private_data;
+ unsigned int i;
+ char buf[20];
+
+ count = min_t(size_t, count, sizeof(buf) - 1);
+ if (copy_from_user(buf, userbuf, count))
+ return -EFAULT;
+
+ buf[count] = '\0';
+ for (i = 0; i < ARRAY_SIZE(dbg_info); i++) {
+ if (strncmp(buf, dbg_info[i].name,
+ strlen(dbg_info[i].name)) == 0) {
+ ah->debug.level ^= dbg_info[i].level; /* toggle bit */
+ break;
+ }
+ }
+ return count;
+}
+
+static const struct file_operations fops_debug = {
+ .read = read_file_debug,
+ .write = write_file_debug,
+ .open = simple_open,
+ .owner = THIS_MODULE,
+ .llseek = default_llseek,
+};
+
+
+/* debugfs: antenna */
+
+static ssize_t read_file_antenna(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ath5k_hw *ah = file->private_data;
+ char buf[700];
+ unsigned int len = 0;
+ unsigned int i;
+ unsigned int v;
+
+ len += scnprintf(buf + len, sizeof(buf) - len, "antenna mode\t%d\n",
+ ah->ah_ant_mode);
+ len += scnprintf(buf + len, sizeof(buf) - len, "default antenna\t%d\n",
+ ah->ah_def_ant);
+ len += scnprintf(buf + len, sizeof(buf) - len, "tx antenna\t%d\n",
+ ah->ah_tx_ant);
+
+ len += scnprintf(buf + len, sizeof(buf) - len, "\nANTENNA\t\tRX\tTX\n");
+ for (i = 1; i < ARRAY_SIZE(ah->stats.antenna_rx); i++) {
+ len += scnprintf(buf + len, sizeof(buf) - len,
+ "[antenna %d]\t%d\t%d\n",
+ i, ah->stats.antenna_rx[i], ah->stats.antenna_tx[i]);
+ }
+ len += scnprintf(buf + len, sizeof(buf) - len, "[invalid]\t%d\t%d\n",
+ ah->stats.antenna_rx[0], ah->stats.antenna_tx[0]);
+
+ v = ath5k_hw_reg_read(ah, AR5K_DEFAULT_ANTENNA);
+ len += scnprintf(buf + len, sizeof(buf) - len,
+ "\nAR5K_DEFAULT_ANTENNA\t0x%08x\n", v);
+
+ v = ath5k_hw_reg_read(ah, AR5K_STA_ID1);
+ len += scnprintf(buf + len, sizeof(buf) - len,
+ "AR5K_STA_ID1_DEFAULT_ANTENNA\t%d\n",
+ (v & AR5K_STA_ID1_DEFAULT_ANTENNA) != 0);
+ len += scnprintf(buf + len, sizeof(buf) - len,
+ "AR5K_STA_ID1_DESC_ANTENNA\t%d\n",
+ (v & AR5K_STA_ID1_DESC_ANTENNA) != 0);
+ len += scnprintf(buf + len, sizeof(buf) - len,
+ "AR5K_STA_ID1_RTS_DEF_ANTENNA\t%d\n",
+ (v & AR5K_STA_ID1_RTS_DEF_ANTENNA) != 0);
+ len += scnprintf(buf + len, sizeof(buf) - len,
+ "AR5K_STA_ID1_SELFGEN_DEF_ANT\t%d\n",
+ (v & AR5K_STA_ID1_SELFGEN_DEF_ANT) != 0);
+
+ v = ath5k_hw_reg_read(ah, AR5K_PHY_AGCCTL);
+ len += scnprintf(buf + len, sizeof(buf) - len,
+ "\nAR5K_PHY_AGCCTL_OFDM_DIV_DIS\t%d\n",
+ (v & AR5K_PHY_AGCCTL_OFDM_DIV_DIS) != 0);
+
+ v = ath5k_hw_reg_read(ah, AR5K_PHY_RESTART);
+ len += scnprintf(buf + len, sizeof(buf) - len,
+ "AR5K_PHY_RESTART_DIV_GC\t\t%x\n",
+ (v & AR5K_PHY_RESTART_DIV_GC) >> AR5K_PHY_RESTART_DIV_GC_S);
+
+ v = ath5k_hw_reg_read(ah, AR5K_PHY_FAST_ANT_DIV);
+ len += scnprintf(buf + len, sizeof(buf) - len,
+ "AR5K_PHY_FAST_ANT_DIV_EN\t%d\n",
+ (v & AR5K_PHY_FAST_ANT_DIV_EN) != 0);
+
+ v = ath5k_hw_reg_read(ah, AR5K_PHY_ANT_SWITCH_TABLE_0);
+ len += scnprintf(buf + len, sizeof(buf) - len,
+ "\nAR5K_PHY_ANT_SWITCH_TABLE_0\t0x%08x\n", v);
+ v = ath5k_hw_reg_read(ah, AR5K_PHY_ANT_SWITCH_TABLE_1);
+ len += scnprintf(buf + len, sizeof(buf) - len,
+ "AR5K_PHY_ANT_SWITCH_TABLE_1\t0x%08x\n", v);
+
+ if (len > sizeof(buf))
+ len = sizeof(buf);
+
+ return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static ssize_t write_file_antenna(struct file *file,
+ const char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ struct ath5k_hw *ah = file->private_data;
+ unsigned int i;
+ char buf[20];
+
+ count = min_t(size_t, count, sizeof(buf) - 1);
+ if (copy_from_user(buf, userbuf, count))
+ return -EFAULT;
+
+ buf[count] = '\0';
+ if (strncmp(buf, "diversity", 9) == 0) {
+ ath5k_hw_set_antenna_mode(ah, AR5K_ANTMODE_DEFAULT);
+ pr_info("debug: enable diversity\n");
+ } else if (strncmp(buf, "fixed-a", 7) == 0) {
+ ath5k_hw_set_antenna_mode(ah, AR5K_ANTMODE_FIXED_A);
+ pr_info("debug: fixed antenna A\n");
+ } else if (strncmp(buf, "fixed-b", 7) == 0) {
+ ath5k_hw_set_antenna_mode(ah, AR5K_ANTMODE_FIXED_B);
+ pr_info("debug: fixed antenna B\n");
+ } else if (strncmp(buf, "clear", 5) == 0) {
+ for (i = 0; i < ARRAY_SIZE(ah->stats.antenna_rx); i++) {
+ ah->stats.antenna_rx[i] = 0;
+ ah->stats.antenna_tx[i] = 0;
+ }
+ pr_info("debug: cleared antenna stats\n");
+ }
+ return count;
+}
+
+static const struct file_operations fops_antenna = {
+ .read = read_file_antenna,
+ .write = write_file_antenna,
+ .open = simple_open,
+ .owner = THIS_MODULE,
+ .llseek = default_llseek,
+};
+
+/* debugfs: misc */
+
+static ssize_t read_file_misc(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ath5k_hw *ah = file->private_data;
+ char buf[700];
+ unsigned int len = 0;
+ u32 filt = ath5k_hw_get_rx_filter(ah);
+
+ len += scnprintf(buf + len, sizeof(buf) - len, "bssid-mask: %pM\n",
+ ah->bssidmask);
+ len += scnprintf(buf + len, sizeof(buf) - len, "filter-flags: 0x%x ",
+ filt);
+ if (filt & AR5K_RX_FILTER_UCAST)
+ len += scnprintf(buf + len, sizeof(buf) - len, " UCAST");
+ if (filt & AR5K_RX_FILTER_MCAST)
+ len += scnprintf(buf + len, sizeof(buf) - len, " MCAST");
+ if (filt & AR5K_RX_FILTER_BCAST)
+ len += scnprintf(buf + len, sizeof(buf) - len, " BCAST");
+ if (filt & AR5K_RX_FILTER_CONTROL)
+ len += scnprintf(buf + len, sizeof(buf) - len, " CONTROL");
+ if (filt & AR5K_RX_FILTER_BEACON)
+ len += scnprintf(buf + len, sizeof(buf) - len, " BEACON");
+ if (filt & AR5K_RX_FILTER_PROM)
+ len += scnprintf(buf + len, sizeof(buf) - len, " PROM");
+ if (filt & AR5K_RX_FILTER_XRPOLL)
+ len += scnprintf(buf + len, sizeof(buf) - len, " XRPOLL");
+ if (filt & AR5K_RX_FILTER_PROBEREQ)
+ len += scnprintf(buf + len, sizeof(buf) - len, " PROBEREQ");
+ if (filt & AR5K_RX_FILTER_PHYERR_5212)
+ len += scnprintf(buf + len, sizeof(buf) - len, " PHYERR-5212");
+ if (filt & AR5K_RX_FILTER_RADARERR_5212)
+ len += scnprintf(buf + len, sizeof(buf) - len, " RADARERR-5212");
+ if (filt & AR5K_RX_FILTER_PHYERR_5211)
+ snprintf(buf + len, sizeof(buf) - len, " PHYERR-5211");
+ if (filt & AR5K_RX_FILTER_RADARERR_5211)
+ len += scnprintf(buf + len, sizeof(buf) - len, " RADARERR-5211");
+
+ len += scnprintf(buf + len, sizeof(buf) - len, "\nopmode: %s (%d)\n",
+ ath_opmode_to_string(ah->opmode), ah->opmode);
+
+ if (len > sizeof(buf))
+ len = sizeof(buf);
+
+ return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static const struct file_operations fops_misc = {
+ .read = read_file_misc,
+ .open = simple_open,
+ .owner = THIS_MODULE,
+};
+
+
+/* debugfs: frameerrors */
+
+static ssize_t read_file_frameerrors(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ath5k_hw *ah = file->private_data;
+ struct ath5k_statistics *st = &ah->stats;
+ char buf[700];
+ unsigned int len = 0;
+ int i;
+
+ len += scnprintf(buf + len, sizeof(buf) - len,
+ "RX\n---------------------\n");
+ len += scnprintf(buf + len, sizeof(buf) - len, "CRC\t%u\t(%u%%)\n",
+ st->rxerr_crc,
+ st->rx_all_count > 0 ?
+ st->rxerr_crc * 100 / st->rx_all_count : 0);
+ len += scnprintf(buf + len, sizeof(buf) - len, "PHY\t%u\t(%u%%)\n",
+ st->rxerr_phy,
+ st->rx_all_count > 0 ?
+ st->rxerr_phy * 100 / st->rx_all_count : 0);
+ for (i = 0; i < 32; i++) {
+ if (st->rxerr_phy_code[i])
+ len += scnprintf(buf + len, sizeof(buf) - len,
+ " phy_err[%u]\t%u\n",
+ i, st->rxerr_phy_code[i]);
+ }
+
+ len += scnprintf(buf + len, sizeof(buf) - len, "FIFO\t%u\t(%u%%)\n",
+ st->rxerr_fifo,
+ st->rx_all_count > 0 ?
+ st->rxerr_fifo * 100 / st->rx_all_count : 0);
+ len += scnprintf(buf + len, sizeof(buf) - len, "decrypt\t%u\t(%u%%)\n",
+ st->rxerr_decrypt,
+ st->rx_all_count > 0 ?
+ st->rxerr_decrypt * 100 / st->rx_all_count : 0);
+ len += scnprintf(buf + len, sizeof(buf) - len, "MIC\t%u\t(%u%%)\n",
+ st->rxerr_mic,
+ st->rx_all_count > 0 ?
+ st->rxerr_mic * 100 / st->rx_all_count : 0);
+ len += scnprintf(buf + len, sizeof(buf) - len, "process\t%u\t(%u%%)\n",
+ st->rxerr_proc,
+ st->rx_all_count > 0 ?
+ st->rxerr_proc * 100 / st->rx_all_count : 0);
+ len += scnprintf(buf + len, sizeof(buf) - len, "jumbo\t%u\t(%u%%)\n",
+ st->rxerr_jumbo,
+ st->rx_all_count > 0 ?
+ st->rxerr_jumbo * 100 / st->rx_all_count : 0);
+ len += scnprintf(buf + len, sizeof(buf) - len, "[RX all\t%u]\n",
+ st->rx_all_count);
+ len += scnprintf(buf + len, sizeof(buf) - len, "RX-all-bytes\t%u\n",
+ st->rx_bytes_count);
+
+ len += scnprintf(buf + len, sizeof(buf) - len,
+ "\nTX\n---------------------\n");
+ len += scnprintf(buf + len, sizeof(buf) - len, "retry\t%u\t(%u%%)\n",
+ st->txerr_retry,
+ st->tx_all_count > 0 ?
+ st->txerr_retry * 100 / st->tx_all_count : 0);
+ len += scnprintf(buf + len, sizeof(buf) - len, "FIFO\t%u\t(%u%%)\n",
+ st->txerr_fifo,
+ st->tx_all_count > 0 ?
+ st->txerr_fifo * 100 / st->tx_all_count : 0);
+ len += scnprintf(buf + len, sizeof(buf) - len, "filter\t%u\t(%u%%)\n",
+ st->txerr_filt,
+ st->tx_all_count > 0 ?
+ st->txerr_filt * 100 / st->tx_all_count : 0);
+ len += scnprintf(buf + len, sizeof(buf) - len, "[TX all\t%u]\n",
+ st->tx_all_count);
+ len += scnprintf(buf + len, sizeof(buf) - len, "TX-all-bytes\t%u\n",
+ st->tx_bytes_count);
+
+ if (len > sizeof(buf))
+ len = sizeof(buf);
+
+ return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static ssize_t write_file_frameerrors(struct file *file,
+ const char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ struct ath5k_hw *ah = file->private_data;
+ struct ath5k_statistics *st = &ah->stats;
+ char buf[20];
+
+ count = min_t(size_t, count, sizeof(buf) - 1);
+ if (copy_from_user(buf, userbuf, count))
+ return -EFAULT;
+
+ buf[count] = '\0';
+ if (strncmp(buf, "clear", 5) == 0) {
+ st->rxerr_crc = 0;
+ st->rxerr_phy = 0;
+ st->rxerr_fifo = 0;
+ st->rxerr_decrypt = 0;
+ st->rxerr_mic = 0;
+ st->rxerr_proc = 0;
+ st->rxerr_jumbo = 0;
+ st->rx_all_count = 0;
+ st->txerr_retry = 0;
+ st->txerr_fifo = 0;
+ st->txerr_filt = 0;
+ st->tx_all_count = 0;
+ pr_info("debug: cleared frameerrors stats\n");
+ }
+ return count;
+}
+
+static const struct file_operations fops_frameerrors = {
+ .read = read_file_frameerrors,
+ .write = write_file_frameerrors,
+ .open = simple_open,
+ .owner = THIS_MODULE,
+ .llseek = default_llseek,
+};
+
+
+/* debugfs: ani */
+
+static ssize_t read_file_ani(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ath5k_hw *ah = file->private_data;
+ struct ath5k_statistics *st = &ah->stats;
+ struct ath5k_ani_state *as = &ah->ani_state;
+
+ char buf[700];
+ unsigned int len = 0;
+
+ len += scnprintf(buf + len, sizeof(buf) - len,
+ "HW has PHY error counters:\t%s\n",
+ ah->ah_capabilities.cap_has_phyerr_counters ?
+ "yes" : "no");
+ len += scnprintf(buf + len, sizeof(buf) - len,
+ "HW max spur immunity level:\t%d\n",
+ as->max_spur_level);
+ len += scnprintf(buf + len, sizeof(buf) - len,
+ "\nANI state\n--------------------------------------------\n");
+ len += scnprintf(buf + len, sizeof(buf) - len, "operating mode:\t\t\t");
+ switch (as->ani_mode) {
+ case ATH5K_ANI_MODE_OFF:
+ len += scnprintf(buf + len, sizeof(buf) - len, "OFF\n");
+ break;
+ case ATH5K_ANI_MODE_MANUAL_LOW:
+ len += scnprintf(buf + len, sizeof(buf) - len,
+ "MANUAL LOW\n");
+ break;
+ case ATH5K_ANI_MODE_MANUAL_HIGH:
+ len += scnprintf(buf + len, sizeof(buf) - len,
+ "MANUAL HIGH\n");
+ break;
+ case ATH5K_ANI_MODE_AUTO:
+ len += scnprintf(buf + len, sizeof(buf) - len, "AUTO\n");
+ break;
+ default:
+ len += scnprintf(buf + len, sizeof(buf) - len,
+ "??? (not good)\n");
+ break;
+ }
+ len += scnprintf(buf + len, sizeof(buf) - len,
+ "noise immunity level:\t\t%d\n",
+ as->noise_imm_level);
+ len += scnprintf(buf + len, sizeof(buf) - len,
+ "spur immunity level:\t\t%d\n",
+ as->spur_level);
+ len += scnprintf(buf + len, sizeof(buf) - len,
+ "firstep level:\t\t\t%d\n",
+ as->firstep_level);
+ len += scnprintf(buf + len, sizeof(buf) - len,
+ "OFDM weak signal detection:\t%s\n",
+ as->ofdm_weak_sig ? "on" : "off");
+ len += scnprintf(buf + len, sizeof(buf) - len,
+ "CCK weak signal detection:\t%s\n",
+ as->cck_weak_sig ? "on" : "off");
+
+ len += scnprintf(buf + len, sizeof(buf) - len,
+ "\nMIB INTERRUPTS:\t\t%u\n",
+ st->mib_intr);
+ len += scnprintf(buf + len, sizeof(buf) - len,
+ "beacon RSSI average:\t%d\n",
+ (int)ewma_beacon_rssi_read(&ah->ah_beacon_rssi_avg));
+
+#define CC_PRINT(_struct, _field) \
+ _struct._field, \
+ _struct.cycles > 0 ? \
+ _struct._field * 100 / _struct.cycles : 0
+
+ len += scnprintf(buf + len, sizeof(buf) - len,
+ "profcnt tx\t\t%u\t(%d%%)\n",
+ CC_PRINT(as->last_cc, tx_frame));
+ len += scnprintf(buf + len, sizeof(buf) - len,
+ "profcnt rx\t\t%u\t(%d%%)\n",
+ CC_PRINT(as->last_cc, rx_frame));
+ len += scnprintf(buf + len, sizeof(buf) - len,
+ "profcnt busy\t\t%u\t(%d%%)\n",
+ CC_PRINT(as->last_cc, rx_busy));
+#undef CC_PRINT
+ len += scnprintf(buf + len, sizeof(buf) - len, "profcnt cycles\t\t%u\n",
+ as->last_cc.cycles);
+ len += scnprintf(buf + len, sizeof(buf) - len,
+ "listen time\t\t%d\tlast: %d\n",
+ as->listen_time, as->last_listen);
+ len += scnprintf(buf + len, sizeof(buf) - len,
+ "OFDM errors\t\t%u\tlast: %u\tsum: %u\n",
+ as->ofdm_errors, as->last_ofdm_errors,
+ as->sum_ofdm_errors);
+ len += scnprintf(buf + len, sizeof(buf) - len,
+ "CCK errors\t\t%u\tlast: %u\tsum: %u\n",
+ as->cck_errors, as->last_cck_errors,
+ as->sum_cck_errors);
+ len += scnprintf(buf + len, sizeof(buf) - len,
+ "AR5K_PHYERR_CNT1\t%x\t(=%d)\n",
+ ath5k_hw_reg_read(ah, AR5K_PHYERR_CNT1),
+ ATH5K_ANI_OFDM_TRIG_HIGH - (ATH5K_PHYERR_CNT_MAX -
+ ath5k_hw_reg_read(ah, AR5K_PHYERR_CNT1)));
+ len += scnprintf(buf + len, sizeof(buf) - len,
+ "AR5K_PHYERR_CNT2\t%x\t(=%d)\n",
+ ath5k_hw_reg_read(ah, AR5K_PHYERR_CNT2),
+ ATH5K_ANI_CCK_TRIG_HIGH - (ATH5K_PHYERR_CNT_MAX -
+ ath5k_hw_reg_read(ah, AR5K_PHYERR_CNT2)));
+
+ if (len > sizeof(buf))
+ len = sizeof(buf);
+
+ return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static ssize_t write_file_ani(struct file *file,
+ const char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ struct ath5k_hw *ah = file->private_data;
+ char buf[20];
+
+ count = min_t(size_t, count, sizeof(buf) - 1);
+ if (copy_from_user(buf, userbuf, count))
+ return -EFAULT;
+
+ buf[count] = '\0';
+ if (strncmp(buf, "sens-low", 8) == 0) {
+ ath5k_ani_init(ah, ATH5K_ANI_MODE_MANUAL_HIGH);
+ } else if (strncmp(buf, "sens-high", 9) == 0) {
+ ath5k_ani_init(ah, ATH5K_ANI_MODE_MANUAL_LOW);
+ } else if (strncmp(buf, "ani-off", 7) == 0) {
+ ath5k_ani_init(ah, ATH5K_ANI_MODE_OFF);
+ } else if (strncmp(buf, "ani-on", 6) == 0) {
+ ath5k_ani_init(ah, ATH5K_ANI_MODE_AUTO);
+ } else if (strncmp(buf, "noise-low", 9) == 0) {
+ ath5k_ani_set_noise_immunity_level(ah, 0);
+ } else if (strncmp(buf, "noise-high", 10) == 0) {
+ ath5k_ani_set_noise_immunity_level(ah,
+ ATH5K_ANI_MAX_NOISE_IMM_LVL);
+ } else if (strncmp(buf, "spur-low", 8) == 0) {
+ ath5k_ani_set_spur_immunity_level(ah, 0);
+ } else if (strncmp(buf, "spur-high", 9) == 0) {
+ ath5k_ani_set_spur_immunity_level(ah,
+ ah->ani_state.max_spur_level);
+ } else if (strncmp(buf, "fir-low", 7) == 0) {
+ ath5k_ani_set_firstep_level(ah, 0);
+ } else if (strncmp(buf, "fir-high", 8) == 0) {
+ ath5k_ani_set_firstep_level(ah, ATH5K_ANI_MAX_FIRSTEP_LVL);
+ } else if (strncmp(buf, "ofdm-off", 8) == 0) {
+ ath5k_ani_set_ofdm_weak_signal_detection(ah, false);
+ } else if (strncmp(buf, "ofdm-on", 7) == 0) {
+ ath5k_ani_set_ofdm_weak_signal_detection(ah, true);
+ } else if (strncmp(buf, "cck-off", 7) == 0) {
+ ath5k_ani_set_cck_weak_signal_detection(ah, false);
+ } else if (strncmp(buf, "cck-on", 6) == 0) {
+ ath5k_ani_set_cck_weak_signal_detection(ah, true);
+ }
+ return count;
+}
+
+static const struct file_operations fops_ani = {
+ .read = read_file_ani,
+ .write = write_file_ani,
+ .open = simple_open,
+ .owner = THIS_MODULE,
+ .llseek = default_llseek,
+};
+
+
+/* debugfs: queues etc */
+
+static ssize_t read_file_queue(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ath5k_hw *ah = file->private_data;
+ char buf[700];
+ unsigned int len = 0;
+
+ struct ath5k_txq *txq;
+ struct ath5k_buf *bf, *bf0;
+ int i, n;
+
+ len += scnprintf(buf + len, sizeof(buf) - len,
+ "available txbuffers: %d\n", ah->txbuf_len);
+
+ for (i = 0; i < ARRAY_SIZE(ah->txqs); i++) {
+ txq = &ah->txqs[i];
+
+ len += scnprintf(buf + len, sizeof(buf) - len,
+ "%02d: %ssetup\n", i, txq->setup ? "" : "not ");
+
+ if (!txq->setup)
+ continue;
+
+ n = 0;
+ spin_lock_bh(&txq->lock);
+ list_for_each_entry_safe(bf, bf0, &txq->q, list)
+ n++;
+ spin_unlock_bh(&txq->lock);
+
+ len += scnprintf(buf + len, sizeof(buf) - len,
+ " len: %d bufs: %d\n", txq->txq_len, n);
+ len += scnprintf(buf + len, sizeof(buf) - len,
+ " stuck: %d\n", txq->txq_stuck);
+ }
+
+ if (len > sizeof(buf))
+ len = sizeof(buf);
+
+ return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static ssize_t write_file_queue(struct file *file,
+ const char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ struct ath5k_hw *ah = file->private_data;
+ char buf[20];
+
+ count = min_t(size_t, count, sizeof(buf) - 1);
+ if (copy_from_user(buf, userbuf, count))
+ return -EFAULT;
+
+ buf[count] = '\0';
+ if (strncmp(buf, "start", 5) == 0)
+ ieee80211_wake_queues(ah->hw);
+ else if (strncmp(buf, "stop", 4) == 0)
+ ieee80211_stop_queues(ah->hw);
+
+ return count;
+}
+
+
+static const struct file_operations fops_queue = {
+ .read = read_file_queue,
+ .write = write_file_queue,
+ .open = simple_open,
+ .owner = THIS_MODULE,
+ .llseek = default_llseek,
+};
+
+/* debugfs: eeprom */
+
+struct eeprom_private {
+ u16 *buf;
+ int len;
+};
+
+static int open_file_eeprom(struct inode *inode, struct file *file)
+{
+ struct eeprom_private *ep;
+ struct ath5k_hw *ah = inode->i_private;
+ bool res;
+ int i, ret;
+ u32 eesize; /* NB: in 16-bit words */
+ u16 val, *buf;
+
+ /* Get eeprom size */
+
+ res = ath5k_hw_nvram_read(ah, AR5K_EEPROM_SIZE_UPPER, &val);
+ if (!res)
+ return -EACCES;
+
+ if (val == 0) {
+ eesize = AR5K_EEPROM_INFO_MAX + AR5K_EEPROM_INFO_BASE;
+ } else {
+ eesize = (val & AR5K_EEPROM_SIZE_UPPER_MASK) <<
+ AR5K_EEPROM_SIZE_ENDLOC_SHIFT;
+ ath5k_hw_nvram_read(ah, AR5K_EEPROM_SIZE_LOWER, &val);
+ eesize = eesize | val;
+ }
+
+ if (eesize > 4096)
+ return -EINVAL;
+
+ /* Create buffer and read in eeprom */
+
+ buf = vmalloc(array_size(eesize, 2));
+ if (!buf) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ for (i = 0; i < eesize; ++i) {
+ if (!ath5k_hw_nvram_read(ah, i, &val)) {
+ ret = -EIO;
+ goto freebuf;
+ }
+ buf[i] = val;
+ }
+
+ /* Create private struct and assign to file */
+
+ ep = kmalloc(sizeof(*ep), GFP_KERNEL);
+ if (!ep) {
+ ret = -ENOMEM;
+ goto freebuf;
+ }
+
+ ep->buf = buf;
+ ep->len = eesize * 2;
+
+ file->private_data = (void *)ep;
+
+ return 0;
+
+freebuf:
+ vfree(buf);
+err:
+ return ret;
+
+}
+
+static ssize_t read_file_eeprom(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct eeprom_private *ep = file->private_data;
+
+ return simple_read_from_buffer(user_buf, count, ppos, ep->buf, ep->len);
+}
+
+static int release_file_eeprom(struct inode *inode, struct file *file)
+{
+ struct eeprom_private *ep = file->private_data;
+
+ vfree(ep->buf);
+ kfree(ep);
+
+ return 0;
+}
+
+static const struct file_operations fops_eeprom = {
+ .open = open_file_eeprom,
+ .read = read_file_eeprom,
+ .release = release_file_eeprom,
+ .owner = THIS_MODULE,
+};
+
+
+void
+ath5k_debug_init_device(struct ath5k_hw *ah)
+{
+ struct dentry *phydir;
+
+ ah->debug.level = ath5k_debug;
+
+ phydir = debugfs_create_dir("ath5k", ah->hw->wiphy->debugfsdir);
+ if (!phydir)
+ return;
+
+ debugfs_create_file("debug", 0600, phydir, ah, &fops_debug);
+ debugfs_create_file("registers", 0400, phydir, ah, &registers_fops);
+ debugfs_create_file("beacon", 0600, phydir, ah, &fops_beacon);
+ debugfs_create_file("reset", 0200, phydir, ah, &fops_reset);
+ debugfs_create_file("antenna", 0600, phydir, ah, &fops_antenna);
+ debugfs_create_file("misc", 0400, phydir, ah, &fops_misc);
+ debugfs_create_file("eeprom", 0400, phydir, ah, &fops_eeprom);
+ debugfs_create_file("frameerrors", 0600, phydir, ah, &fops_frameerrors);
+ debugfs_create_file("ani", 0600, phydir, ah, &fops_ani);
+ debugfs_create_file("queue", 0600, phydir, ah, &fops_queue);
+ debugfs_create_bool("32khz_clock", 0600, phydir,
+ &ah->ah_use_32khz_clock);
+}
+
+/* functions used in other places */
+
+void
+ath5k_debug_dump_bands(struct ath5k_hw *ah)
+{
+ unsigned int b, i;
+
+ if (likely(!(ah->debug.level & ATH5K_DEBUG_DUMPBANDS)))
+ return;
+
+ for (b = 0; b < NUM_NL80211_BANDS; b++) {
+ struct ieee80211_supported_band *band = &ah->sbands[b];
+ char bname[6];
+ switch (band->band) {
+ case NL80211_BAND_2GHZ:
+ strcpy(bname, "2 GHz");
+ break;
+ case NL80211_BAND_5GHZ:
+ strcpy(bname, "5 GHz");
+ break;
+ default:
+ printk(KERN_DEBUG "Band not supported: %d\n",
+ band->band);
+ return;
+ }
+ printk(KERN_DEBUG "Band %s: channels %d, rates %d\n", bname,
+ band->n_channels, band->n_bitrates);
+ printk(KERN_DEBUG " channels:\n");
+ for (i = 0; i < band->n_channels; i++)
+ printk(KERN_DEBUG " %3d %d %.4x %.4x\n",
+ ieee80211_frequency_to_channel(
+ band->channels[i].center_freq),
+ band->channels[i].center_freq,
+ band->channels[i].hw_value,
+ band->channels[i].flags);
+ printk(KERN_DEBUG " rates:\n");
+ for (i = 0; i < band->n_bitrates; i++)
+ printk(KERN_DEBUG " %4d %.4x %.4x %.4x\n",
+ band->bitrates[i].bitrate,
+ band->bitrates[i].hw_value,
+ band->bitrates[i].flags,
+ band->bitrates[i].hw_value_short);
+ }
+}
+
+static inline void
+ath5k_debug_printrxbuf(struct ath5k_buf *bf, int done,
+ struct ath5k_rx_status *rs)
+{
+ struct ath5k_desc *ds = bf->desc;
+ struct ath5k_hw_all_rx_desc *rd = &ds->ud.ds_rx;
+
+ printk(KERN_DEBUG "R (%p %llx) %08x %08x %08x %08x %08x %08x %c\n",
+ ds, (unsigned long long)bf->daddr,
+ ds->ds_link, ds->ds_data,
+ rd->rx_ctl.rx_control_0, rd->rx_ctl.rx_control_1,
+ rd->rx_stat.rx_status_0, rd->rx_stat.rx_status_1,
+ !done ? ' ' : (rs->rs_status == 0) ? '*' : '!');
+}
+
+void
+ath5k_debug_printrxbuffs(struct ath5k_hw *ah)
+{
+ struct ath5k_desc *ds;
+ struct ath5k_buf *bf;
+ struct ath5k_rx_status rs = {};
+ int status;
+
+ if (likely(!(ah->debug.level & ATH5K_DEBUG_DESC)))
+ return;
+
+ printk(KERN_DEBUG "rxdp %x, rxlink %p\n",
+ ath5k_hw_get_rxdp(ah), ah->rxlink);
+
+ spin_lock_bh(&ah->rxbuflock);
+ list_for_each_entry(bf, &ah->rxbuf, list) {
+ ds = bf->desc;
+ status = ah->ah_proc_rx_desc(ah, ds, &rs);
+ if (!status)
+ ath5k_debug_printrxbuf(bf, status == 0, &rs);
+ }
+ spin_unlock_bh(&ah->rxbuflock);
+}
+
+void
+ath5k_debug_printtxbuf(struct ath5k_hw *ah, struct ath5k_buf *bf)
+{
+ struct ath5k_desc *ds = bf->desc;
+ struct ath5k_hw_5212_tx_desc *td = &ds->ud.ds_tx5212;
+ struct ath5k_tx_status ts = {};
+ int done;
+
+ if (likely(!(ah->debug.level & ATH5K_DEBUG_DESC)))
+ return;
+
+ done = ah->ah_proc_tx_desc(ah, bf->desc, &ts);
+
+ printk(KERN_DEBUG "T (%p %llx) %08x %08x %08x %08x %08x %08x %08x "
+ "%08x %c\n", ds, (unsigned long long)bf->daddr, ds->ds_link,
+ ds->ds_data, td->tx_ctl.tx_control_0, td->tx_ctl.tx_control_1,
+ td->tx_ctl.tx_control_2, td->tx_ctl.tx_control_3,
+ td->tx_stat.tx_status_0, td->tx_stat.tx_status_1,
+ done ? ' ' : (ts.ts_status == 0) ? '*' : '!');
+}
diff --git a/drivers/net/wireless/ath/ath5k/debug.h b/drivers/net/wireless/ath/ath5k/debug.h
new file mode 100644
index 000000000..0a3f916a1
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/debug.h
@@ -0,0 +1,165 @@
+/*
+ * Copyright (c) 2007 Bruno Randolf <bruno@thinktube.com>
+ *
+ * This file is free software: you may copy, redistribute and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation, either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ *
+ * This file incorporates work covered by the following copyright and
+ * permission notice:
+ *
+ * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting
+ * Copyright (c) 2004-2005 Atheros Communications, Inc.
+ * Copyright (c) 2006 Devicescape Software, Inc.
+ * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com>
+ * Copyright (c) 2007 Luis R. Rodriguez <mcgrof@winlab.rutgers.edu>
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
+ * redistribution must be conditioned upon including a substantially
+ * similar Disclaimer requirement for further binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
+ * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
+ * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
+ * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ * THE POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef _ATH5K_DEBUG_H
+#define _ATH5K_DEBUG_H
+
+struct ath5k_hw;
+struct sk_buff;
+struct ath5k_buf;
+
+struct ath5k_dbg_info {
+ unsigned int level; /* debug level */
+};
+
+/**
+ * enum ath5k_debug_level - ath5k debug level
+ *
+ * @ATH5K_DEBUG_RESET: reset processing
+ * @ATH5K_DEBUG_INTR: interrupt handling
+ * @ATH5K_DEBUG_MODE: mode init/setup
+ * @ATH5K_DEBUG_XMIT: basic xmit operation
+ * @ATH5K_DEBUG_BEACON: beacon handling
+ * @ATH5K_DEBUG_CALIBRATE: periodic calibration
+ * @ATH5K_DEBUG_TXPOWER: transmit power setting
+ * @ATH5K_DEBUG_LED: led management
+ * @ATH5K_DEBUG_DUMP_RX: print received skb content
+ * @ATH5K_DEBUG_DUMP_TX: print transmit skb content
+ * @ATH5K_DEBUG_DUMPBANDS: dump bands
+ * @ATH5K_DEBUG_DMA: debug dma start/stop
+ * @ATH5K_DEBUG_TRACE: trace function calls
+ * @ATH5K_DEBUG_DESC: descriptor setup
+ * @ATH5K_DEBUG_ANY: show at any debug level
+ *
+ * The debug level is used to control the amount and type of debugging output
+ * we want to see. The debug level is given in calls to ATH5K_DBG to specify
+ * where the message should appear, and the user can control the debugging
+ * messages he wants to see, either by the module parameter 'debug' on module
+ * load, or dynamically by using debugfs 'ath5k/phyX/debug'. these levels can
+ * be combined together by bitwise OR.
+ */
+enum ath5k_debug_level {
+ ATH5K_DEBUG_RESET = 0x00000001,
+ ATH5K_DEBUG_INTR = 0x00000002,
+ ATH5K_DEBUG_MODE = 0x00000004,
+ ATH5K_DEBUG_XMIT = 0x00000008,
+ ATH5K_DEBUG_BEACON = 0x00000010,
+ ATH5K_DEBUG_CALIBRATE = 0x00000020,
+ ATH5K_DEBUG_TXPOWER = 0x00000040,
+ ATH5K_DEBUG_LED = 0x00000080,
+ ATH5K_DEBUG_DUMPBANDS = 0x00000400,
+ ATH5K_DEBUG_DMA = 0x00000800,
+ ATH5K_DEBUG_ANI = 0x00002000,
+ ATH5K_DEBUG_DESC = 0x00004000,
+ ATH5K_DEBUG_ANY = 0xffffffff
+};
+
+#ifdef CONFIG_ATH5K_DEBUG
+
+#define ATH5K_DBG(_sc, _m, _fmt, ...) do { \
+ if (unlikely((_sc)->debug.level & (_m) && net_ratelimit())) \
+ ATH5K_PRINTK(_sc, KERN_DEBUG, "(%s:%d): " _fmt, \
+ __func__, __LINE__, ##__VA_ARGS__); \
+ } while (0)
+
+#define ATH5K_DBG_UNLIMIT(_sc, _m, _fmt, ...) do { \
+ if (unlikely((_sc)->debug.level & (_m))) \
+ ATH5K_PRINTK(_sc, KERN_DEBUG, "(%s:%d): " _fmt, \
+ __func__, __LINE__, ##__VA_ARGS__); \
+ } while (0)
+
+void
+ath5k_debug_init_device(struct ath5k_hw *ah);
+
+void
+ath5k_debug_printrxbuffs(struct ath5k_hw *ah);
+
+void
+ath5k_debug_dump_bands(struct ath5k_hw *ah);
+
+void
+ath5k_debug_printtxbuf(struct ath5k_hw *ah, struct ath5k_buf *bf);
+
+#else /* no debugging */
+
+#include <linux/compiler.h>
+
+static inline __printf(3, 4) void
+ATH5K_DBG(struct ath5k_hw *ah, unsigned int m, const char *fmt, ...) {}
+
+static inline __printf(3, 4) void
+ATH5K_DBG_UNLIMIT(struct ath5k_hw *ah, unsigned int m, const char *fmt, ...)
+{}
+
+static inline void
+ath5k_debug_init_device(struct ath5k_hw *ah) {}
+
+static inline void
+ath5k_debug_printrxbuffs(struct ath5k_hw *ah) {}
+
+static inline void
+ath5k_debug_dump_bands(struct ath5k_hw *ah) {}
+
+static inline void
+ath5k_debug_printtxbuf(struct ath5k_hw *ah, struct ath5k_buf *bf) {}
+
+#endif /* ifdef CONFIG_ATH5K_DEBUG */
+
+#endif /* ifndef _ATH5K_DEBUG_H */
diff --git a/drivers/net/wireless/ath/ath5k/desc.c b/drivers/net/wireless/ath/ath5k/desc.c
new file mode 100644
index 000000000..80f751394
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/desc.c
@@ -0,0 +1,786 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ * Copyright (c) 2007-2008 Pavel Roskin <proski@gnu.org>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/******************************\
+ Hardware Descriptor Functions
+\******************************/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include "ath5k.h"
+#include "reg.h"
+#include "debug.h"
+
+
+/**
+ * DOC: Hardware descriptor functions
+ *
+ * Here we handle the processing of the low-level hw descriptors
+ * that hw reads and writes via DMA for each TX and RX attempt (that means
+ * we can also have descriptors for failed TX/RX tries). We have two kind of
+ * descriptors for RX and TX, control descriptors tell the hw how to send or
+ * receive a packet where to read/write it from/to etc and status descriptors
+ * that contain information about how the packet was sent or received (errors
+ * included).
+ *
+ * Descriptor format is not exactly the same for each MAC chip version so we
+ * have function pointers on &struct ath5k_hw we initialize at runtime based on
+ * the chip used.
+ */
+
+
+/************************\
+* TX Control descriptors *
+\************************/
+
+/**
+ * ath5k_hw_setup_2word_tx_desc() - Initialize a 2-word tx control descriptor
+ * @ah: The &struct ath5k_hw
+ * @desc: The &struct ath5k_desc
+ * @pkt_len: Frame length in bytes
+ * @hdr_len: Header length in bytes (only used on AR5210)
+ * @padsize: Any padding we've added to the frame length
+ * @type: One of enum ath5k_pkt_type
+ * @tx_power: Tx power in 0.5dB steps
+ * @tx_rate0: HW idx for transmission rate
+ * @tx_tries0: Max number of retransmissions
+ * @key_index: Index on key table to use for encryption
+ * @antenna_mode: Which antenna to use (0 for auto)
+ * @flags: One of AR5K_TXDESC_* flags (desc.h)
+ * @rtscts_rate: HW idx for RTS/CTS transmission rate
+ * @rtscts_duration: What to put on duration field on the header of RTS/CTS
+ *
+ * Internal function to initialize a 2-Word TX control descriptor
+ * found on AR5210 and AR5211 MACs chips.
+ *
+ * Returns 0 on success or -EINVAL on false input
+ */
+static int
+ath5k_hw_setup_2word_tx_desc(struct ath5k_hw *ah,
+ struct ath5k_desc *desc,
+ unsigned int pkt_len, unsigned int hdr_len,
+ int padsize,
+ enum ath5k_pkt_type type,
+ unsigned int tx_power,
+ unsigned int tx_rate0, unsigned int tx_tries0,
+ unsigned int key_index,
+ unsigned int antenna_mode,
+ unsigned int flags,
+ unsigned int rtscts_rate, unsigned int rtscts_duration)
+{
+ u32 frame_type;
+ struct ath5k_hw_2w_tx_ctl *tx_ctl;
+ unsigned int frame_len;
+
+ tx_ctl = &desc->ud.ds_tx5210.tx_ctl;
+
+ /*
+ * Validate input
+ * - Zero retries don't make sense.
+ * - A zero rate will put the HW into a mode where it continuously sends
+ * noise on the channel, so it is important to avoid this.
+ */
+ if (unlikely(tx_tries0 == 0)) {
+ ATH5K_ERR(ah, "zero retries\n");
+ WARN_ON(1);
+ return -EINVAL;
+ }
+ if (unlikely(tx_rate0 == 0)) {
+ ATH5K_ERR(ah, "zero rate\n");
+ WARN_ON(1);
+ return -EINVAL;
+ }
+
+ /* Clear descriptor */
+ memset(&desc->ud.ds_tx5210, 0, sizeof(struct ath5k_hw_5210_tx_desc));
+
+ /* Setup control descriptor */
+
+ /* Verify and set frame length */
+
+ /* remove padding we might have added before */
+ frame_len = pkt_len - padsize + FCS_LEN;
+
+ if (frame_len & ~AR5K_2W_TX_DESC_CTL0_FRAME_LEN)
+ return -EINVAL;
+
+ tx_ctl->tx_control_0 = frame_len & AR5K_2W_TX_DESC_CTL0_FRAME_LEN;
+
+ /* Verify and set buffer length */
+
+ /* NB: beacon's BufLen must be a multiple of 4 bytes */
+ if (type == AR5K_PKT_TYPE_BEACON)
+ pkt_len = roundup(pkt_len, 4);
+
+ if (pkt_len & ~AR5K_2W_TX_DESC_CTL1_BUF_LEN)
+ return -EINVAL;
+
+ tx_ctl->tx_control_1 = pkt_len & AR5K_2W_TX_DESC_CTL1_BUF_LEN;
+
+ /*
+ * Verify and set header length (only 5210)
+ */
+ if (ah->ah_version == AR5K_AR5210) {
+ if (hdr_len & ~AR5K_2W_TX_DESC_CTL0_HEADER_LEN_5210)
+ return -EINVAL;
+ tx_ctl->tx_control_0 |=
+ AR5K_REG_SM(hdr_len, AR5K_2W_TX_DESC_CTL0_HEADER_LEN_5210);
+ }
+
+ /*Differences between 5210-5211*/
+ if (ah->ah_version == AR5K_AR5210) {
+ switch (type) {
+ case AR5K_PKT_TYPE_BEACON:
+ case AR5K_PKT_TYPE_PROBE_RESP:
+ frame_type = AR5K_AR5210_TX_DESC_FRAME_TYPE_NO_DELAY;
+ break;
+ case AR5K_PKT_TYPE_PIFS:
+ frame_type = AR5K_AR5210_TX_DESC_FRAME_TYPE_PIFS;
+ break;
+ default:
+ frame_type = type;
+ break;
+ }
+
+ tx_ctl->tx_control_0 |=
+ AR5K_REG_SM(frame_type, AR5K_2W_TX_DESC_CTL0_FRAME_TYPE_5210) |
+ AR5K_REG_SM(tx_rate0, AR5K_2W_TX_DESC_CTL0_XMIT_RATE);
+
+ } else {
+ tx_ctl->tx_control_0 |=
+ AR5K_REG_SM(tx_rate0, AR5K_2W_TX_DESC_CTL0_XMIT_RATE) |
+ AR5K_REG_SM(antenna_mode,
+ AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT);
+ tx_ctl->tx_control_1 |=
+ AR5K_REG_SM(type, AR5K_2W_TX_DESC_CTL1_FRAME_TYPE_5211);
+ }
+
+#define _TX_FLAGS(_c, _flag) \
+ if (flags & AR5K_TXDESC_##_flag) { \
+ tx_ctl->tx_control_##_c |= \
+ AR5K_2W_TX_DESC_CTL##_c##_##_flag; \
+ }
+#define _TX_FLAGS_5211(_c, _flag) \
+ if (flags & AR5K_TXDESC_##_flag) { \
+ tx_ctl->tx_control_##_c |= \
+ AR5K_2W_TX_DESC_CTL##_c##_##_flag##_5211; \
+ }
+ _TX_FLAGS(0, CLRDMASK);
+ _TX_FLAGS(0, INTREQ);
+ _TX_FLAGS(0, RTSENA);
+
+ if (ah->ah_version == AR5K_AR5211) {
+ _TX_FLAGS_5211(0, VEOL);
+ _TX_FLAGS_5211(1, NOACK);
+ }
+
+#undef _TX_FLAGS
+#undef _TX_FLAGS_5211
+
+ /*
+ * WEP crap
+ */
+ if (key_index != AR5K_TXKEYIX_INVALID) {
+ tx_ctl->tx_control_0 |=
+ AR5K_2W_TX_DESC_CTL0_ENCRYPT_KEY_VALID;
+ tx_ctl->tx_control_1 |=
+ AR5K_REG_SM(key_index,
+ AR5K_2W_TX_DESC_CTL1_ENC_KEY_IDX);
+ }
+
+ /*
+ * RTS/CTS Duration [5210 ?]
+ */
+ if ((ah->ah_version == AR5K_AR5210) &&
+ (flags & (AR5K_TXDESC_RTSENA | AR5K_TXDESC_CTSENA)))
+ tx_ctl->tx_control_1 |= rtscts_duration &
+ AR5K_2W_TX_DESC_CTL1_RTS_DURATION_5210;
+
+ return 0;
+}
+
+/**
+ * ath5k_hw_setup_4word_tx_desc() - Initialize a 4-word tx control descriptor
+ * @ah: The &struct ath5k_hw
+ * @desc: The &struct ath5k_desc
+ * @pkt_len: Frame length in bytes
+ * @hdr_len: Header length in bytes (only used on AR5210)
+ * @padsize: Any padding we've added to the frame length
+ * @type: One of enum ath5k_pkt_type
+ * @tx_power: Tx power in 0.5dB steps
+ * @tx_rate0: HW idx for transmission rate
+ * @tx_tries0: Max number of retransmissions
+ * @key_index: Index on key table to use for encryption
+ * @antenna_mode: Which antenna to use (0 for auto)
+ * @flags: One of AR5K_TXDESC_* flags (desc.h)
+ * @rtscts_rate: HW idx for RTS/CTS transmission rate
+ * @rtscts_duration: What to put on duration field on the header of RTS/CTS
+ *
+ * Internal function to initialize a 4-Word TX control descriptor
+ * found on AR5212 and later MACs chips.
+ *
+ * Returns 0 on success or -EINVAL on false input
+ */
+static int
+ath5k_hw_setup_4word_tx_desc(struct ath5k_hw *ah,
+ struct ath5k_desc *desc,
+ unsigned int pkt_len, unsigned int hdr_len,
+ int padsize,
+ enum ath5k_pkt_type type,
+ unsigned int tx_power,
+ unsigned int tx_rate0, unsigned int tx_tries0,
+ unsigned int key_index,
+ unsigned int antenna_mode,
+ unsigned int flags,
+ unsigned int rtscts_rate, unsigned int rtscts_duration)
+{
+ struct ath5k_hw_4w_tx_ctl *tx_ctl;
+ unsigned int frame_len;
+
+ /*
+ * Use local variables for these to reduce load/store access on
+ * uncached memory
+ */
+ u32 txctl0 = 0, txctl1 = 0, txctl2 = 0, txctl3 = 0;
+
+ tx_ctl = &desc->ud.ds_tx5212.tx_ctl;
+
+ /*
+ * Validate input
+ * - Zero retries don't make sense.
+ * - A zero rate will put the HW into a mode where it continuously sends
+ * noise on the channel, so it is important to avoid this.
+ */
+ if (unlikely(tx_tries0 == 0)) {
+ ATH5K_ERR(ah, "zero retries\n");
+ WARN_ON(1);
+ return -EINVAL;
+ }
+ if (unlikely(tx_rate0 == 0)) {
+ ATH5K_ERR(ah, "zero rate\n");
+ WARN_ON(1);
+ return -EINVAL;
+ }
+
+ tx_power += ah->ah_txpower.txp_offset;
+ if (tx_power > AR5K_TUNE_MAX_TXPOWER)
+ tx_power = AR5K_TUNE_MAX_TXPOWER;
+
+ /* Clear descriptor status area */
+ memset(&desc->ud.ds_tx5212.tx_stat, 0,
+ sizeof(desc->ud.ds_tx5212.tx_stat));
+
+ /* Setup control descriptor */
+
+ /* Verify and set frame length */
+
+ /* remove padding we might have added before */
+ frame_len = pkt_len - padsize + FCS_LEN;
+
+ if (frame_len & ~AR5K_4W_TX_DESC_CTL0_FRAME_LEN)
+ return -EINVAL;
+
+ txctl0 = frame_len & AR5K_4W_TX_DESC_CTL0_FRAME_LEN;
+
+ /* Verify and set buffer length */
+
+ /* NB: beacon's BufLen must be a multiple of 4 bytes */
+ if (type == AR5K_PKT_TYPE_BEACON)
+ pkt_len = roundup(pkt_len, 4);
+
+ if (pkt_len & ~AR5K_4W_TX_DESC_CTL1_BUF_LEN)
+ return -EINVAL;
+
+ txctl1 = pkt_len & AR5K_4W_TX_DESC_CTL1_BUF_LEN;
+
+ txctl0 |= AR5K_REG_SM(tx_power, AR5K_4W_TX_DESC_CTL0_XMIT_POWER) |
+ AR5K_REG_SM(antenna_mode, AR5K_4W_TX_DESC_CTL0_ANT_MODE_XMIT);
+ txctl1 |= AR5K_REG_SM(type, AR5K_4W_TX_DESC_CTL1_FRAME_TYPE);
+ txctl2 = AR5K_REG_SM(tx_tries0, AR5K_4W_TX_DESC_CTL2_XMIT_TRIES0);
+ txctl3 = tx_rate0 & AR5K_4W_TX_DESC_CTL3_XMIT_RATE0;
+
+#define _TX_FLAGS(_c, _flag) \
+ if (flags & AR5K_TXDESC_##_flag) { \
+ txctl##_c |= AR5K_4W_TX_DESC_CTL##_c##_##_flag; \
+ }
+
+ _TX_FLAGS(0, CLRDMASK);
+ _TX_FLAGS(0, VEOL);
+ _TX_FLAGS(0, INTREQ);
+ _TX_FLAGS(0, RTSENA);
+ _TX_FLAGS(0, CTSENA);
+ _TX_FLAGS(1, NOACK);
+
+#undef _TX_FLAGS
+
+ /*
+ * WEP crap
+ */
+ if (key_index != AR5K_TXKEYIX_INVALID) {
+ txctl0 |= AR5K_4W_TX_DESC_CTL0_ENCRYPT_KEY_VALID;
+ txctl1 |= AR5K_REG_SM(key_index,
+ AR5K_4W_TX_DESC_CTL1_ENCRYPT_KEY_IDX);
+ }
+
+ /*
+ * RTS/CTS
+ */
+ if (flags & (AR5K_TXDESC_RTSENA | AR5K_TXDESC_CTSENA)) {
+ if ((flags & AR5K_TXDESC_RTSENA) &&
+ (flags & AR5K_TXDESC_CTSENA))
+ return -EINVAL;
+ txctl2 |= rtscts_duration & AR5K_4W_TX_DESC_CTL2_RTS_DURATION;
+ txctl3 |= AR5K_REG_SM(rtscts_rate,
+ AR5K_4W_TX_DESC_CTL3_RTS_CTS_RATE);
+ }
+
+ tx_ctl->tx_control_0 = txctl0;
+ tx_ctl->tx_control_1 = txctl1;
+ tx_ctl->tx_control_2 = txctl2;
+ tx_ctl->tx_control_3 = txctl3;
+
+ return 0;
+}
+
+/**
+ * ath5k_hw_setup_mrr_tx_desc() - Initialize an MRR tx control descriptor
+ * @ah: The &struct ath5k_hw
+ * @desc: The &struct ath5k_desc
+ * @tx_rate1: HW idx for rate used on transmission series 1
+ * @tx_tries1: Max number of retransmissions for transmission series 1
+ * @tx_rate2: HW idx for rate used on transmission series 2
+ * @tx_tries2: Max number of retransmissions for transmission series 2
+ * @tx_rate3: HW idx for rate used on transmission series 3
+ * @tx_tries3: Max number of retransmissions for transmission series 3
+ *
+ * Multi rate retry (MRR) tx control descriptors are available only on AR5212
+ * MACs, they are part of the normal 4-word tx control descriptor (see above)
+ * but we handle them through a separate function for better abstraction.
+ *
+ * Returns 0 on success or -EINVAL on invalid input
+ */
+int
+ath5k_hw_setup_mrr_tx_desc(struct ath5k_hw *ah,
+ struct ath5k_desc *desc,
+ u_int tx_rate1, u_int tx_tries1,
+ u_int tx_rate2, u_int tx_tries2,
+ u_int tx_rate3, u_int tx_tries3)
+{
+ struct ath5k_hw_4w_tx_ctl *tx_ctl;
+
+ /* no mrr support for cards older than 5212 */
+ if (ah->ah_version < AR5K_AR5212)
+ return 0;
+
+ /*
+ * Rates can be 0 as long as the retry count is 0 too.
+ * A zero rate and nonzero retry count will put the HW into a mode where
+ * it continuously sends noise on the channel, so it is important to
+ * avoid this.
+ */
+ if (unlikely((tx_rate1 == 0 && tx_tries1 != 0) ||
+ (tx_rate2 == 0 && tx_tries2 != 0) ||
+ (tx_rate3 == 0 && tx_tries3 != 0))) {
+ ATH5K_ERR(ah, "zero rate\n");
+ WARN_ON(1);
+ return -EINVAL;
+ }
+
+ if (ah->ah_version == AR5K_AR5212) {
+ tx_ctl = &desc->ud.ds_tx5212.tx_ctl;
+
+#define _XTX_TRIES(_n) \
+ if (tx_tries##_n) { \
+ tx_ctl->tx_control_2 |= \
+ AR5K_REG_SM(tx_tries##_n, \
+ AR5K_4W_TX_DESC_CTL2_XMIT_TRIES##_n); \
+ tx_ctl->tx_control_3 |= \
+ AR5K_REG_SM(tx_rate##_n, \
+ AR5K_4W_TX_DESC_CTL3_XMIT_RATE##_n); \
+ }
+
+ _XTX_TRIES(1);
+ _XTX_TRIES(2);
+ _XTX_TRIES(3);
+
+#undef _XTX_TRIES
+
+ return 1;
+ }
+
+ return 0;
+}
+
+
+/***********************\
+* TX Status descriptors *
+\***********************/
+
+/**
+ * ath5k_hw_proc_2word_tx_status() - Process a tx status descriptor on 5210/1
+ * @ah: The &struct ath5k_hw
+ * @desc: The &struct ath5k_desc
+ * @ts: The &struct ath5k_tx_status
+ */
+static int
+ath5k_hw_proc_2word_tx_status(struct ath5k_hw *ah,
+ struct ath5k_desc *desc,
+ struct ath5k_tx_status *ts)
+{
+ struct ath5k_hw_tx_status *tx_status;
+
+ tx_status = &desc->ud.ds_tx5210.tx_stat;
+
+ /* No frame has been send or error */
+ if (unlikely((tx_status->tx_status_1 & AR5K_DESC_TX_STATUS1_DONE) == 0))
+ return -EINPROGRESS;
+
+ /*
+ * Get descriptor status
+ */
+ ts->ts_tstamp = AR5K_REG_MS(tx_status->tx_status_0,
+ AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP);
+ ts->ts_shortretry = AR5K_REG_MS(tx_status->tx_status_0,
+ AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT);
+ ts->ts_final_retry = AR5K_REG_MS(tx_status->tx_status_0,
+ AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT);
+ /*TODO: ts->ts_virtcol + test*/
+ ts->ts_seqnum = AR5K_REG_MS(tx_status->tx_status_1,
+ AR5K_DESC_TX_STATUS1_SEQ_NUM);
+ ts->ts_rssi = AR5K_REG_MS(tx_status->tx_status_1,
+ AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH);
+ ts->ts_antenna = 1;
+ ts->ts_status = 0;
+ ts->ts_final_idx = 0;
+
+ if (!(tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK)) {
+ if (tx_status->tx_status_0 &
+ AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES)
+ ts->ts_status |= AR5K_TXERR_XRETRY;
+
+ if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN)
+ ts->ts_status |= AR5K_TXERR_FIFO;
+
+ if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FILTERED)
+ ts->ts_status |= AR5K_TXERR_FILT;
+ }
+
+ return 0;
+}
+
+/**
+ * ath5k_hw_proc_4word_tx_status() - Process a tx status descriptor on 5212
+ * @ah: The &struct ath5k_hw
+ * @desc: The &struct ath5k_desc
+ * @ts: The &struct ath5k_tx_status
+ */
+static int
+ath5k_hw_proc_4word_tx_status(struct ath5k_hw *ah,
+ struct ath5k_desc *desc,
+ struct ath5k_tx_status *ts)
+{
+ struct ath5k_hw_tx_status *tx_status;
+ u32 txstat0, txstat1;
+
+ tx_status = &desc->ud.ds_tx5212.tx_stat;
+
+ txstat1 = READ_ONCE(tx_status->tx_status_1);
+
+ /* No frame has been send or error */
+ if (unlikely(!(txstat1 & AR5K_DESC_TX_STATUS1_DONE)))
+ return -EINPROGRESS;
+
+ txstat0 = READ_ONCE(tx_status->tx_status_0);
+
+ /*
+ * Get descriptor status
+ */
+ ts->ts_tstamp = AR5K_REG_MS(txstat0,
+ AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP);
+ ts->ts_shortretry = AR5K_REG_MS(txstat0,
+ AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT);
+ ts->ts_final_retry = AR5K_REG_MS(txstat0,
+ AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT);
+ ts->ts_seqnum = AR5K_REG_MS(txstat1,
+ AR5K_DESC_TX_STATUS1_SEQ_NUM);
+ ts->ts_rssi = AR5K_REG_MS(txstat1,
+ AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH);
+ ts->ts_antenna = (txstat1 &
+ AR5K_DESC_TX_STATUS1_XMIT_ANTENNA_5212) ? 2 : 1;
+ ts->ts_status = 0;
+
+ ts->ts_final_idx = AR5K_REG_MS(txstat1,
+ AR5K_DESC_TX_STATUS1_FINAL_TS_IX_5212);
+
+ /* TX error */
+ if (!(txstat0 & AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK)) {
+ if (txstat0 & AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES)
+ ts->ts_status |= AR5K_TXERR_XRETRY;
+
+ if (txstat0 & AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN)
+ ts->ts_status |= AR5K_TXERR_FIFO;
+
+ if (txstat0 & AR5K_DESC_TX_STATUS0_FILTERED)
+ ts->ts_status |= AR5K_TXERR_FILT;
+ }
+
+ return 0;
+}
+
+
+/****************\
+* RX Descriptors *
+\****************/
+
+/**
+ * ath5k_hw_setup_rx_desc() - Initialize an rx control descriptor
+ * @ah: The &struct ath5k_hw
+ * @desc: The &struct ath5k_desc
+ * @size: RX buffer length in bytes
+ * @flags: One of AR5K_RXDESC_* flags
+ */
+int
+ath5k_hw_setup_rx_desc(struct ath5k_hw *ah,
+ struct ath5k_desc *desc,
+ u32 size, unsigned int flags)
+{
+ struct ath5k_hw_rx_ctl *rx_ctl;
+
+ rx_ctl = &desc->ud.ds_rx.rx_ctl;
+
+ /*
+ * Clear the descriptor
+ * If we don't clean the status descriptor,
+ * while scanning we get too many results,
+ * most of them virtual, after some secs
+ * of scanning system hangs. M.F.
+ */
+ memset(&desc->ud.ds_rx, 0, sizeof(struct ath5k_hw_all_rx_desc));
+
+ if (unlikely(size & ~AR5K_DESC_RX_CTL1_BUF_LEN))
+ return -EINVAL;
+
+ /* Setup descriptor */
+ rx_ctl->rx_control_1 = size & AR5K_DESC_RX_CTL1_BUF_LEN;
+
+ if (flags & AR5K_RXDESC_INTREQ)
+ rx_ctl->rx_control_1 |= AR5K_DESC_RX_CTL1_INTREQ;
+
+ return 0;
+}
+
+/**
+ * ath5k_hw_proc_5210_rx_status() - Process the rx status descriptor on 5210/1
+ * @ah: The &struct ath5k_hw
+ * @desc: The &struct ath5k_desc
+ * @rs: The &struct ath5k_rx_status
+ *
+ * Internal function used to process an RX status descriptor
+ * on AR5210/5211 MAC.
+ *
+ * Returns 0 on success or -EINPROGRESS in case we haven't received the who;e
+ * frame yet.
+ */
+static int
+ath5k_hw_proc_5210_rx_status(struct ath5k_hw *ah,
+ struct ath5k_desc *desc,
+ struct ath5k_rx_status *rs)
+{
+ struct ath5k_hw_rx_status *rx_status;
+
+ rx_status = &desc->ud.ds_rx.rx_stat;
+
+ /* No frame received / not ready */
+ if (unlikely(!(rx_status->rx_status_1 &
+ AR5K_5210_RX_DESC_STATUS1_DONE)))
+ return -EINPROGRESS;
+
+ memset(rs, 0, sizeof(struct ath5k_rx_status));
+
+ /*
+ * Frame receive status
+ */
+ rs->rs_datalen = rx_status->rx_status_0 &
+ AR5K_5210_RX_DESC_STATUS0_DATA_LEN;
+ rs->rs_rssi = AR5K_REG_MS(rx_status->rx_status_0,
+ AR5K_5210_RX_DESC_STATUS0_RECEIVE_SIGNAL);
+ rs->rs_rate = AR5K_REG_MS(rx_status->rx_status_0,
+ AR5K_5210_RX_DESC_STATUS0_RECEIVE_RATE);
+ rs->rs_more = !!(rx_status->rx_status_0 &
+ AR5K_5210_RX_DESC_STATUS0_MORE);
+ /* TODO: this timestamp is 13 bit, later on we assume 15 bit!
+ * also the HAL code for 5210 says the timestamp is bits [10..22] of the
+ * TSF, and extends the timestamp here to 15 bit.
+ * we need to check on 5210...
+ */
+ rs->rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1,
+ AR5K_5210_RX_DESC_STATUS1_RECEIVE_TIMESTAMP);
+
+ if (ah->ah_version == AR5K_AR5211)
+ rs->rs_antenna = AR5K_REG_MS(rx_status->rx_status_0,
+ AR5K_5210_RX_DESC_STATUS0_RECEIVE_ANT_5211);
+ else
+ rs->rs_antenna = (rx_status->rx_status_0 &
+ AR5K_5210_RX_DESC_STATUS0_RECEIVE_ANT_5210)
+ ? 2 : 1;
+
+ /*
+ * Key table status
+ */
+ if (rx_status->rx_status_1 & AR5K_5210_RX_DESC_STATUS1_KEY_INDEX_VALID)
+ rs->rs_keyix = AR5K_REG_MS(rx_status->rx_status_1,
+ AR5K_5210_RX_DESC_STATUS1_KEY_INDEX);
+ else
+ rs->rs_keyix = AR5K_RXKEYIX_INVALID;
+
+ /*
+ * Receive/descriptor errors
+ */
+ if (!(rx_status->rx_status_1 &
+ AR5K_5210_RX_DESC_STATUS1_FRAME_RECEIVE_OK)) {
+ if (rx_status->rx_status_1 &
+ AR5K_5210_RX_DESC_STATUS1_CRC_ERROR)
+ rs->rs_status |= AR5K_RXERR_CRC;
+
+ /* only on 5210 */
+ if ((ah->ah_version == AR5K_AR5210) &&
+ (rx_status->rx_status_1 &
+ AR5K_5210_RX_DESC_STATUS1_FIFO_OVERRUN_5210))
+ rs->rs_status |= AR5K_RXERR_FIFO;
+
+ if (rx_status->rx_status_1 &
+ AR5K_5210_RX_DESC_STATUS1_PHY_ERROR) {
+ rs->rs_status |= AR5K_RXERR_PHY;
+ rs->rs_phyerr = AR5K_REG_MS(rx_status->rx_status_1,
+ AR5K_5210_RX_DESC_STATUS1_PHY_ERROR);
+ }
+
+ if (rx_status->rx_status_1 &
+ AR5K_5210_RX_DESC_STATUS1_DECRYPT_CRC_ERROR)
+ rs->rs_status |= AR5K_RXERR_DECRYPT;
+ }
+
+ return 0;
+}
+
+/**
+ * ath5k_hw_proc_5212_rx_status() - Process the rx status descriptor on 5212
+ * @ah: The &struct ath5k_hw
+ * @desc: The &struct ath5k_desc
+ * @rs: The &struct ath5k_rx_status
+ *
+ * Internal function used to process an RX status descriptor
+ * on AR5212 and later MAC.
+ *
+ * Returns 0 on success or -EINPROGRESS in case we haven't received the who;e
+ * frame yet.
+ */
+static int
+ath5k_hw_proc_5212_rx_status(struct ath5k_hw *ah,
+ struct ath5k_desc *desc,
+ struct ath5k_rx_status *rs)
+{
+ struct ath5k_hw_rx_status *rx_status;
+ u32 rxstat0, rxstat1;
+
+ rx_status = &desc->ud.ds_rx.rx_stat;
+ rxstat1 = READ_ONCE(rx_status->rx_status_1);
+
+ /* No frame received / not ready */
+ if (unlikely(!(rxstat1 & AR5K_5212_RX_DESC_STATUS1_DONE)))
+ return -EINPROGRESS;
+
+ memset(rs, 0, sizeof(struct ath5k_rx_status));
+ rxstat0 = READ_ONCE(rx_status->rx_status_0);
+
+ /*
+ * Frame receive status
+ */
+ rs->rs_datalen = rxstat0 & AR5K_5212_RX_DESC_STATUS0_DATA_LEN;
+ rs->rs_rssi = AR5K_REG_MS(rxstat0,
+ AR5K_5212_RX_DESC_STATUS0_RECEIVE_SIGNAL);
+ rs->rs_rate = AR5K_REG_MS(rxstat0,
+ AR5K_5212_RX_DESC_STATUS0_RECEIVE_RATE);
+ rs->rs_antenna = AR5K_REG_MS(rxstat0,
+ AR5K_5212_RX_DESC_STATUS0_RECEIVE_ANTENNA);
+ rs->rs_more = !!(rxstat0 & AR5K_5212_RX_DESC_STATUS0_MORE);
+ rs->rs_tstamp = AR5K_REG_MS(rxstat1,
+ AR5K_5212_RX_DESC_STATUS1_RECEIVE_TIMESTAMP);
+
+ /*
+ * Key table status
+ */
+ if (rxstat1 & AR5K_5212_RX_DESC_STATUS1_KEY_INDEX_VALID)
+ rs->rs_keyix = AR5K_REG_MS(rxstat1,
+ AR5K_5212_RX_DESC_STATUS1_KEY_INDEX);
+ else
+ rs->rs_keyix = AR5K_RXKEYIX_INVALID;
+
+ /*
+ * Receive/descriptor errors
+ */
+ if (!(rxstat1 & AR5K_5212_RX_DESC_STATUS1_FRAME_RECEIVE_OK)) {
+ if (rxstat1 & AR5K_5212_RX_DESC_STATUS1_CRC_ERROR)
+ rs->rs_status |= AR5K_RXERR_CRC;
+
+ if (rxstat1 & AR5K_5212_RX_DESC_STATUS1_PHY_ERROR) {
+ rs->rs_status |= AR5K_RXERR_PHY;
+ rs->rs_phyerr = AR5K_REG_MS(rxstat1,
+ AR5K_5212_RX_DESC_STATUS1_PHY_ERROR_CODE);
+ if (!ah->ah_capabilities.cap_has_phyerr_counters)
+ ath5k_ani_phy_error_report(ah, rs->rs_phyerr);
+ }
+
+ if (rxstat1 & AR5K_5212_RX_DESC_STATUS1_DECRYPT_CRC_ERROR)
+ rs->rs_status |= AR5K_RXERR_DECRYPT;
+
+ if (rxstat1 & AR5K_5212_RX_DESC_STATUS1_MIC_ERROR)
+ rs->rs_status |= AR5K_RXERR_MIC;
+ }
+ return 0;
+}
+
+
+/********\
+* Attach *
+\********/
+
+/**
+ * ath5k_hw_init_desc_functions() - Init function pointers inside ah
+ * @ah: The &struct ath5k_hw
+ *
+ * Maps the internal descriptor functions to the function pointers on ah, used
+ * from above. This is used as an abstraction layer to handle the various chips
+ * the same way.
+ */
+int
+ath5k_hw_init_desc_functions(struct ath5k_hw *ah)
+{
+ if (ah->ah_version == AR5K_AR5212) {
+ ah->ah_setup_tx_desc = ath5k_hw_setup_4word_tx_desc;
+ ah->ah_proc_tx_desc = ath5k_hw_proc_4word_tx_status;
+ ah->ah_proc_rx_desc = ath5k_hw_proc_5212_rx_status;
+ } else if (ah->ah_version <= AR5K_AR5211) {
+ ah->ah_setup_tx_desc = ath5k_hw_setup_2word_tx_desc;
+ ah->ah_proc_tx_desc = ath5k_hw_proc_2word_tx_status;
+ ah->ah_proc_rx_desc = ath5k_hw_proc_5210_rx_status;
+ } else
+ return -ENOTSUPP;
+ return 0;
+}
diff --git a/drivers/net/wireless/ath/ath5k/desc.h b/drivers/net/wireless/ath/ath5k/desc.h
new file mode 100644
index 000000000..8d6c01a49
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/desc.h
@@ -0,0 +1,367 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/*
+ * RX/TX descriptor structures
+ */
+
+/**
+ * struct ath5k_hw_rx_ctl - Common hardware RX control descriptor
+ * @rx_control_0: RX control word 0
+ * @rx_control_1: RX control word 1
+ */
+struct ath5k_hw_rx_ctl {
+ u32 rx_control_0;
+ u32 rx_control_1;
+} __packed __aligned(4);
+
+/* RX control word 1 fields/flags */
+#define AR5K_DESC_RX_CTL1_BUF_LEN 0x00000fff /* data buffer length */
+#define AR5K_DESC_RX_CTL1_INTREQ 0x00002000 /* RX interrupt request */
+
+/**
+ * struct ath5k_hw_rx_status - Common hardware RX status descriptor
+ * @rx_status_0: RX status word 0
+ * @rx_status_1: RX status word 1
+ *
+ * 5210, 5211 and 5212 differ only in the fields and flags defined below
+ */
+struct ath5k_hw_rx_status {
+ u32 rx_status_0;
+ u32 rx_status_1;
+} __packed __aligned(4);
+
+/* 5210/5211 */
+/* RX status word 0 fields/flags */
+#define AR5K_5210_RX_DESC_STATUS0_DATA_LEN 0x00000fff /* RX data length */
+#define AR5K_5210_RX_DESC_STATUS0_MORE 0x00001000 /* more desc for this frame */
+#define AR5K_5210_RX_DESC_STATUS0_RECEIVE_ANT_5210 0x00004000 /* [5210] receive on ant 1 */
+#define AR5K_5210_RX_DESC_STATUS0_RECEIVE_RATE 0x00078000 /* reception rate */
+#define AR5K_5210_RX_DESC_STATUS0_RECEIVE_RATE_S 15
+#define AR5K_5210_RX_DESC_STATUS0_RECEIVE_SIGNAL 0x07f80000 /* rssi */
+#define AR5K_5210_RX_DESC_STATUS0_RECEIVE_SIGNAL_S 19
+#define AR5K_5210_RX_DESC_STATUS0_RECEIVE_ANT_5211 0x38000000 /* [5211] receive antenna */
+#define AR5K_5210_RX_DESC_STATUS0_RECEIVE_ANT_5211_S 27
+
+/* RX status word 1 fields/flags */
+#define AR5K_5210_RX_DESC_STATUS1_DONE 0x00000001 /* descriptor complete */
+#define AR5K_5210_RX_DESC_STATUS1_FRAME_RECEIVE_OK 0x00000002 /* reception success */
+#define AR5K_5210_RX_DESC_STATUS1_CRC_ERROR 0x00000004 /* CRC error */
+#define AR5K_5210_RX_DESC_STATUS1_FIFO_OVERRUN_5210 0x00000008 /* [5210] FIFO overrun */
+#define AR5K_5210_RX_DESC_STATUS1_DECRYPT_CRC_ERROR 0x00000010 /* decryption CRC failure */
+#define AR5K_5210_RX_DESC_STATUS1_PHY_ERROR 0x000000e0 /* PHY error */
+#define AR5K_5210_RX_DESC_STATUS1_PHY_ERROR_S 5
+#define AR5K_5210_RX_DESC_STATUS1_KEY_INDEX_VALID 0x00000100 /* key index valid */
+#define AR5K_5210_RX_DESC_STATUS1_KEY_INDEX 0x00007e00 /* decryption key index */
+#define AR5K_5210_RX_DESC_STATUS1_KEY_INDEX_S 9
+#define AR5K_5210_RX_DESC_STATUS1_RECEIVE_TIMESTAMP 0x0fff8000 /* 13 bit of TSF */
+#define AR5K_5210_RX_DESC_STATUS1_RECEIVE_TIMESTAMP_S 15
+#define AR5K_5210_RX_DESC_STATUS1_KEY_CACHE_MISS 0x10000000 /* key cache miss */
+
+/* 5212 */
+/* RX status word 0 fields/flags */
+#define AR5K_5212_RX_DESC_STATUS0_DATA_LEN 0x00000fff /* RX data length */
+#define AR5K_5212_RX_DESC_STATUS0_MORE 0x00001000 /* more desc for this frame */
+#define AR5K_5212_RX_DESC_STATUS0_DECOMP_CRC_ERROR 0x00002000 /* decompression CRC error */
+#define AR5K_5212_RX_DESC_STATUS0_RECEIVE_RATE 0x000f8000 /* reception rate */
+#define AR5K_5212_RX_DESC_STATUS0_RECEIVE_RATE_S 15
+#define AR5K_5212_RX_DESC_STATUS0_RECEIVE_SIGNAL 0x0ff00000 /* rssi */
+#define AR5K_5212_RX_DESC_STATUS0_RECEIVE_SIGNAL_S 20
+#define AR5K_5212_RX_DESC_STATUS0_RECEIVE_ANTENNA 0xf0000000 /* receive antenna */
+#define AR5K_5212_RX_DESC_STATUS0_RECEIVE_ANTENNA_S 28
+
+/* RX status word 1 fields/flags */
+#define AR5K_5212_RX_DESC_STATUS1_DONE 0x00000001 /* descriptor complete */
+#define AR5K_5212_RX_DESC_STATUS1_FRAME_RECEIVE_OK 0x00000002 /* frame reception success */
+#define AR5K_5212_RX_DESC_STATUS1_CRC_ERROR 0x00000004 /* CRC error */
+#define AR5K_5212_RX_DESC_STATUS1_DECRYPT_CRC_ERROR 0x00000008 /* decryption CRC failure */
+#define AR5K_5212_RX_DESC_STATUS1_PHY_ERROR 0x00000010 /* PHY error */
+#define AR5K_5212_RX_DESC_STATUS1_MIC_ERROR 0x00000020 /* MIC decrypt error */
+#define AR5K_5212_RX_DESC_STATUS1_KEY_INDEX_VALID 0x00000100 /* key index valid */
+#define AR5K_5212_RX_DESC_STATUS1_KEY_INDEX 0x0000fe00 /* decryption key index */
+#define AR5K_5212_RX_DESC_STATUS1_KEY_INDEX_S 9
+#define AR5K_5212_RX_DESC_STATUS1_RECEIVE_TIMESTAMP 0x7fff0000 /* first 15bit of the TSF */
+#define AR5K_5212_RX_DESC_STATUS1_RECEIVE_TIMESTAMP_S 16
+#define AR5K_5212_RX_DESC_STATUS1_KEY_CACHE_MISS 0x80000000 /* key cache miss */
+#define AR5K_5212_RX_DESC_STATUS1_PHY_ERROR_CODE 0x0000ff00 /* phy error code overlays key index and valid fields */
+#define AR5K_5212_RX_DESC_STATUS1_PHY_ERROR_CODE_S 8
+
+/**
+ * enum ath5k_phy_error_code - PHY Error codes
+ * @AR5K_RX_PHY_ERROR_UNDERRUN: Transmit underrun, [5210] No error
+ * @AR5K_RX_PHY_ERROR_TIMING: Timing error
+ * @AR5K_RX_PHY_ERROR_PARITY: Illegal parity
+ * @AR5K_RX_PHY_ERROR_RATE: Illegal rate
+ * @AR5K_RX_PHY_ERROR_LENGTH: Illegal length
+ * @AR5K_RX_PHY_ERROR_RADAR: Radar detect, [5210] 64 QAM rate
+ * @AR5K_RX_PHY_ERROR_SERVICE: Illegal service
+ * @AR5K_RX_PHY_ERROR_TOR: Transmit override receive
+ * @AR5K_RX_PHY_ERROR_OFDM_TIMING: OFDM Timing error [5212+]
+ * @AR5K_RX_PHY_ERROR_OFDM_SIGNAL_PARITY: OFDM Signal parity error [5212+]
+ * @AR5K_RX_PHY_ERROR_OFDM_RATE_ILLEGAL: OFDM Illegal rate [5212+]
+ * @AR5K_RX_PHY_ERROR_OFDM_LENGTH_ILLEGAL: OFDM Illegal length [5212+]
+ * @AR5K_RX_PHY_ERROR_OFDM_POWER_DROP: OFDM Power drop [5212+]
+ * @AR5K_RX_PHY_ERROR_OFDM_SERVICE: OFDM Service (?) [5212+]
+ * @AR5K_RX_PHY_ERROR_OFDM_RESTART: OFDM Restart (?) [5212+]
+ * @AR5K_RX_PHY_ERROR_CCK_TIMING: CCK Timing error [5212+]
+ * @AR5K_RX_PHY_ERROR_CCK_HEADER_CRC: Header CRC error [5212+]
+ * @AR5K_RX_PHY_ERROR_CCK_RATE_ILLEGAL: Illegal rate [5212+]
+ * @AR5K_RX_PHY_ERROR_CCK_SERVICE: CCK Service (?) [5212+]
+ * @AR5K_RX_PHY_ERROR_CCK_RESTART: CCK Restart (?) [5212+]
+ */
+enum ath5k_phy_error_code {
+ AR5K_RX_PHY_ERROR_UNDERRUN = 0,
+ AR5K_RX_PHY_ERROR_TIMING = 1,
+ AR5K_RX_PHY_ERROR_PARITY = 2,
+ AR5K_RX_PHY_ERROR_RATE = 3,
+ AR5K_RX_PHY_ERROR_LENGTH = 4,
+ AR5K_RX_PHY_ERROR_RADAR = 5,
+ AR5K_RX_PHY_ERROR_SERVICE = 6,
+ AR5K_RX_PHY_ERROR_TOR = 7,
+ AR5K_RX_PHY_ERROR_OFDM_TIMING = 17,
+ AR5K_RX_PHY_ERROR_OFDM_SIGNAL_PARITY = 18,
+ AR5K_RX_PHY_ERROR_OFDM_RATE_ILLEGAL = 19,
+ AR5K_RX_PHY_ERROR_OFDM_LENGTH_ILLEGAL = 20,
+ AR5K_RX_PHY_ERROR_OFDM_POWER_DROP = 21,
+ AR5K_RX_PHY_ERROR_OFDM_SERVICE = 22,
+ AR5K_RX_PHY_ERROR_OFDM_RESTART = 23,
+ AR5K_RX_PHY_ERROR_CCK_TIMING = 25,
+ AR5K_RX_PHY_ERROR_CCK_HEADER_CRC = 26,
+ AR5K_RX_PHY_ERROR_CCK_RATE_ILLEGAL = 27,
+ AR5K_RX_PHY_ERROR_CCK_SERVICE = 30,
+ AR5K_RX_PHY_ERROR_CCK_RESTART = 31,
+};
+
+/**
+ * struct ath5k_hw_2w_tx_ctl - 5210/5211 hardware 2-word TX control descriptor
+ * @tx_control_0: TX control word 0
+ * @tx_control_1: TX control word 1
+ */
+struct ath5k_hw_2w_tx_ctl {
+ u32 tx_control_0;
+ u32 tx_control_1;
+} __packed __aligned(4);
+
+/* TX control word 0 fields/flags */
+#define AR5K_2W_TX_DESC_CTL0_FRAME_LEN 0x00000fff /* frame length */
+#define AR5K_2W_TX_DESC_CTL0_HEADER_LEN_5210 0x0003f000 /* [5210] header length */
+#define AR5K_2W_TX_DESC_CTL0_HEADER_LEN_5210_S 12
+#define AR5K_2W_TX_DESC_CTL0_XMIT_RATE 0x003c0000 /* tx rate */
+#define AR5K_2W_TX_DESC_CTL0_XMIT_RATE_S 18
+#define AR5K_2W_TX_DESC_CTL0_RTSENA 0x00400000 /* RTS/CTS enable */
+#define AR5K_2W_TX_DESC_CTL0_LONG_PACKET_5210 0x00800000 /* [5210] long packet */
+#define AR5K_2W_TX_DESC_CTL0_VEOL_5211 0x00800000 /* [5211] virtual end-of-list */
+#define AR5K_2W_TX_DESC_CTL0_CLRDMASK 0x01000000 /* clear destination mask */
+#define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5210 0x02000000 /* [5210] antenna selection */
+#define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5211 0x1e000000 /* [5211] antenna selection */
+#define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT \
+ (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5210 : \
+ AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5211)
+#define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_S 25
+#define AR5K_2W_TX_DESC_CTL0_FRAME_TYPE_5210 0x1c000000 /* [5210] frame type */
+#define AR5K_2W_TX_DESC_CTL0_FRAME_TYPE_5210_S 26
+#define AR5K_2W_TX_DESC_CTL0_INTREQ 0x20000000 /* TX interrupt request */
+#define AR5K_2W_TX_DESC_CTL0_ENCRYPT_KEY_VALID 0x40000000 /* key is valid */
+
+/* TX control word 1 fields/flags */
+#define AR5K_2W_TX_DESC_CTL1_BUF_LEN 0x00000fff /* data buffer length */
+#define AR5K_2W_TX_DESC_CTL1_MORE 0x00001000 /* more desc for this frame */
+#define AR5K_2W_TX_DESC_CTL1_ENC_KEY_IDX_5210 0x0007e000 /* [5210] key table index */
+#define AR5K_2W_TX_DESC_CTL1_ENC_KEY_IDX_5211 0x000fe000 /* [5211] key table index */
+#define AR5K_2W_TX_DESC_CTL1_ENC_KEY_IDX \
+ (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_2W_TX_DESC_CTL1_ENC_KEY_IDX_5210 : \
+ AR5K_2W_TX_DESC_CTL1_ENC_KEY_IDX_5211)
+#define AR5K_2W_TX_DESC_CTL1_ENC_KEY_IDX_S 13
+#define AR5K_2W_TX_DESC_CTL1_FRAME_TYPE_5211 0x00700000 /* [5211] frame type */
+#define AR5K_2W_TX_DESC_CTL1_FRAME_TYPE_5211_S 20
+#define AR5K_2W_TX_DESC_CTL1_NOACK_5211 0x00800000 /* [5211] no ACK */
+#define AR5K_2W_TX_DESC_CTL1_RTS_DURATION_5210 0xfff80000 /* [5210] lower 13 bit of duration */
+
+/* Frame types */
+#define AR5K_AR5210_TX_DESC_FRAME_TYPE_NORMAL 0
+#define AR5K_AR5210_TX_DESC_FRAME_TYPE_ATIM 1
+#define AR5K_AR5210_TX_DESC_FRAME_TYPE_PSPOLL 2
+#define AR5K_AR5210_TX_DESC_FRAME_TYPE_NO_DELAY 3
+#define AR5K_AR5211_TX_DESC_FRAME_TYPE_BEACON 3
+#define AR5K_AR5210_TX_DESC_FRAME_TYPE_PIFS 4
+#define AR5K_AR5211_TX_DESC_FRAME_TYPE_PRESP 4
+
+/**
+ * struct ath5k_hw_4w_tx_ctl - 5212 hardware 4-word TX control descriptor
+ * @tx_control_0: TX control word 0
+ * @tx_control_1: TX control word 1
+ * @tx_control_2: TX control word 2
+ * @tx_control_3: TX control word 3
+ */
+struct ath5k_hw_4w_tx_ctl {
+ u32 tx_control_0;
+ u32 tx_control_1;
+ u32 tx_control_2;
+ u32 tx_control_3;
+} __packed __aligned(4);
+
+/* TX control word 0 fields/flags */
+#define AR5K_4W_TX_DESC_CTL0_FRAME_LEN 0x00000fff /* frame length */
+#define AR5K_4W_TX_DESC_CTL0_XMIT_POWER 0x003f0000 /* transmit power */
+#define AR5K_4W_TX_DESC_CTL0_XMIT_POWER_S 16
+#define AR5K_4W_TX_DESC_CTL0_RTSENA 0x00400000 /* RTS/CTS enable */
+#define AR5K_4W_TX_DESC_CTL0_VEOL 0x00800000 /* virtual end-of-list */
+#define AR5K_4W_TX_DESC_CTL0_CLRDMASK 0x01000000 /* clear destination mask */
+#define AR5K_4W_TX_DESC_CTL0_ANT_MODE_XMIT 0x1e000000 /* TX antenna selection */
+#define AR5K_4W_TX_DESC_CTL0_ANT_MODE_XMIT_S 25
+#define AR5K_4W_TX_DESC_CTL0_INTREQ 0x20000000 /* TX interrupt request */
+#define AR5K_4W_TX_DESC_CTL0_ENCRYPT_KEY_VALID 0x40000000 /* destination index valid */
+#define AR5K_4W_TX_DESC_CTL0_CTSENA 0x80000000 /* precede frame with CTS */
+
+/* TX control word 1 fields/flags */
+#define AR5K_4W_TX_DESC_CTL1_BUF_LEN 0x00000fff /* data buffer length */
+#define AR5K_4W_TX_DESC_CTL1_MORE 0x00001000 /* more desc for this frame */
+#define AR5K_4W_TX_DESC_CTL1_ENCRYPT_KEY_IDX 0x000fe000 /* destination table index */
+#define AR5K_4W_TX_DESC_CTL1_ENCRYPT_KEY_IDX_S 13
+#define AR5K_4W_TX_DESC_CTL1_FRAME_TYPE 0x00f00000 /* frame type */
+#define AR5K_4W_TX_DESC_CTL1_FRAME_TYPE_S 20
+#define AR5K_4W_TX_DESC_CTL1_NOACK 0x01000000 /* no ACK */
+#define AR5K_4W_TX_DESC_CTL1_COMP_PROC 0x06000000 /* compression processing */
+#define AR5K_4W_TX_DESC_CTL1_COMP_PROC_S 25
+#define AR5K_4W_TX_DESC_CTL1_COMP_IV_LEN 0x18000000 /* length of frame IV */
+#define AR5K_4W_TX_DESC_CTL1_COMP_IV_LEN_S 27
+#define AR5K_4W_TX_DESC_CTL1_COMP_ICV_LEN 0x60000000 /* length of frame ICV */
+#define AR5K_4W_TX_DESC_CTL1_COMP_ICV_LEN_S 29
+
+/* TX control word 2 fields/flags */
+#define AR5K_4W_TX_DESC_CTL2_RTS_DURATION 0x00007fff /* RTS/CTS duration */
+#define AR5K_4W_TX_DESC_CTL2_DURATION_UPD_EN 0x00008000 /* frame duration update */
+#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES0 0x000f0000 /* series 0 max attempts */
+#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES0_S 16
+#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES1 0x00f00000 /* series 1 max attempts */
+#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES1_S 20
+#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES2 0x0f000000 /* series 2 max attempts */
+#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES2_S 24
+#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES3 0xf0000000 /* series 3 max attempts */
+#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES3_S 28
+
+/* TX control word 3 fields/flags */
+#define AR5K_4W_TX_DESC_CTL3_XMIT_RATE0 0x0000001f /* series 0 tx rate */
+#define AR5K_4W_TX_DESC_CTL3_XMIT_RATE1 0x000003e0 /* series 1 tx rate */
+#define AR5K_4W_TX_DESC_CTL3_XMIT_RATE1_S 5
+#define AR5K_4W_TX_DESC_CTL3_XMIT_RATE2 0x00007c00 /* series 2 tx rate */
+#define AR5K_4W_TX_DESC_CTL3_XMIT_RATE2_S 10
+#define AR5K_4W_TX_DESC_CTL3_XMIT_RATE3 0x000f8000 /* series 3 tx rate */
+#define AR5K_4W_TX_DESC_CTL3_XMIT_RATE3_S 15
+#define AR5K_4W_TX_DESC_CTL3_RTS_CTS_RATE 0x01f00000 /* RTS or CTS rate */
+#define AR5K_4W_TX_DESC_CTL3_RTS_CTS_RATE_S 20
+
+/**
+ * struct ath5k_hw_tx_status - Common TX status descriptor
+ * @tx_status_0: TX status word 0
+ * @tx_status_1: TX status word 1
+ */
+struct ath5k_hw_tx_status {
+ u32 tx_status_0;
+ u32 tx_status_1;
+} __packed __aligned(4);
+
+/* TX status word 0 fields/flags */
+#define AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK 0x00000001 /* TX success */
+#define AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES 0x00000002 /* excessive retries */
+#define AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN 0x00000004 /* FIFO underrun */
+#define AR5K_DESC_TX_STATUS0_FILTERED 0x00000008 /* TX filter indication */
+/* according to the HAL sources the spec has short/long retry counts reversed.
+ * we have it reversed to the HAL sources as well, for 5210 and 5211.
+ * For 5212 these fields are defined as RTS_FAIL_COUNT and DATA_FAIL_COUNT,
+ * but used respectively as SHORT and LONG retry count in the code later. This
+ * is consistent with the definitions here... TODO: check */
+#define AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT 0x000000f0 /* short retry count */
+#define AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT_S 4
+#define AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT 0x00000f00 /* long retry count */
+#define AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT_S 8
+#define AR5K_DESC_TX_STATUS0_VIRTCOLL_CT_5211 0x0000f000 /* [5211+] virtual collision count */
+#define AR5K_DESC_TX_STATUS0_VIRTCOLL_CT_5212_S 12
+#define AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP 0xffff0000 /* TX timestamp */
+#define AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP_S 16
+
+/* TX status word 1 fields/flags */
+#define AR5K_DESC_TX_STATUS1_DONE 0x00000001 /* descriptor complete */
+#define AR5K_DESC_TX_STATUS1_SEQ_NUM 0x00001ffe /* TX sequence number */
+#define AR5K_DESC_TX_STATUS1_SEQ_NUM_S 1
+#define AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH 0x001fe000 /* signal strength of ACK */
+#define AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH_S 13
+#define AR5K_DESC_TX_STATUS1_FINAL_TS_IX_5212 0x00600000 /* [5212] final TX attempt series ix */
+#define AR5K_DESC_TX_STATUS1_FINAL_TS_IX_5212_S 21
+#define AR5K_DESC_TX_STATUS1_COMP_SUCCESS_5212 0x00800000 /* [5212] compression status */
+#define AR5K_DESC_TX_STATUS1_XMIT_ANTENNA_5212 0x01000000 /* [5212] transmit antenna */
+
+/**
+ * struct ath5k_hw_5210_tx_desc - 5210/5211 hardware TX descriptor
+ * @tx_ctl: The &struct ath5k_hw_2w_tx_ctl
+ * @tx_stat: The &struct ath5k_hw_tx_status
+ */
+struct ath5k_hw_5210_tx_desc {
+ struct ath5k_hw_2w_tx_ctl tx_ctl;
+ struct ath5k_hw_tx_status tx_stat;
+} __packed __aligned(4);
+
+/**
+ * struct ath5k_hw_5212_tx_desc - 5212 hardware TX descriptor
+ * @tx_ctl: The &struct ath5k_hw_4w_tx_ctl
+ * @tx_stat: The &struct ath5k_hw_tx_status
+ */
+struct ath5k_hw_5212_tx_desc {
+ struct ath5k_hw_4w_tx_ctl tx_ctl;
+ struct ath5k_hw_tx_status tx_stat;
+} __packed __aligned(4);
+
+/**
+ * struct ath5k_hw_all_rx_desc - Common hardware RX descriptor
+ * @rx_ctl: The &struct ath5k_hw_rx_ctl
+ * @rx_stat: The &struct ath5k_hw_rx_status
+ */
+struct ath5k_hw_all_rx_desc {
+ struct ath5k_hw_rx_ctl rx_ctl;
+ struct ath5k_hw_rx_status rx_stat;
+} __packed __aligned(4);
+
+/**
+ * struct ath5k_desc - Atheros hardware DMA descriptor
+ * @ds_link: Physical address of the next descriptor
+ * @ds_data: Physical address of data buffer (skb)
+ * @ud: Union containing hw_5xxx_tx_desc structs and hw_all_rx_desc
+ *
+ * This is read and written to by the hardware
+ */
+struct ath5k_desc {
+ u32 ds_link;
+ u32 ds_data;
+
+ union {
+ struct ath5k_hw_5210_tx_desc ds_tx5210;
+ struct ath5k_hw_5212_tx_desc ds_tx5212;
+ struct ath5k_hw_all_rx_desc ds_rx;
+ } ud;
+} __packed __aligned(4);
+
+#define AR5K_RXDESC_INTREQ 0x0020
+
+#define AR5K_TXDESC_CLRDMASK 0x0001
+#define AR5K_TXDESC_NOACK 0x0002 /*[5211+]*/
+#define AR5K_TXDESC_RTSENA 0x0004
+#define AR5K_TXDESC_CTSENA 0x0008
+#define AR5K_TXDESC_INTREQ 0x0010
+#define AR5K_TXDESC_VEOL 0x0020 /*[5211+]*/
diff --git a/drivers/net/wireless/ath/ath5k/dma.c b/drivers/net/wireless/ath/ath5k/dma.c
new file mode 100644
index 000000000..d9e376eb0
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/dma.c
@@ -0,0 +1,913 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/*************************************\
+* DMA and interrupt masking functions *
+\*************************************/
+
+/**
+ * DOC: DMA and interrupt masking functions
+ *
+ * Here we setup descriptor pointers (rxdp/txdp) start/stop dma engine and
+ * handle queue setup for 5210 chipset (rest are handled on qcu.c).
+ * Also we setup interrupt mask register (IMR) and read the various interrupt
+ * status registers (ISR).
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include "ath5k.h"
+#include "reg.h"
+#include "debug.h"
+
+
+/*********\
+* Receive *
+\*********/
+
+/**
+ * ath5k_hw_start_rx_dma() - Start DMA receive
+ * @ah: The &struct ath5k_hw
+ */
+void
+ath5k_hw_start_rx_dma(struct ath5k_hw *ah)
+{
+ ath5k_hw_reg_write(ah, AR5K_CR_RXE, AR5K_CR);
+ ath5k_hw_reg_read(ah, AR5K_CR);
+}
+
+/**
+ * ath5k_hw_stop_rx_dma() - Stop DMA receive
+ * @ah: The &struct ath5k_hw
+ */
+static int
+ath5k_hw_stop_rx_dma(struct ath5k_hw *ah)
+{
+ unsigned int i;
+
+ ath5k_hw_reg_write(ah, AR5K_CR_RXD, AR5K_CR);
+
+ /*
+ * It may take some time to disable the DMA receive unit
+ */
+ for (i = 1000; i > 0 &&
+ (ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_CR_RXE) != 0;
+ i--)
+ udelay(100);
+
+ if (!i)
+ ATH5K_DBG(ah, ATH5K_DEBUG_DMA,
+ "failed to stop RX DMA !\n");
+
+ return i ? 0 : -EBUSY;
+}
+
+/**
+ * ath5k_hw_get_rxdp() - Get RX Descriptor's address
+ * @ah: The &struct ath5k_hw
+ */
+u32
+ath5k_hw_get_rxdp(struct ath5k_hw *ah)
+{
+ return ath5k_hw_reg_read(ah, AR5K_RXDP);
+}
+
+/**
+ * ath5k_hw_set_rxdp() - Set RX Descriptor's address
+ * @ah: The &struct ath5k_hw
+ * @phys_addr: RX descriptor address
+ *
+ * Returns -EIO if rx is active
+ */
+int
+ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr)
+{
+ if (ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_CR_RXE) {
+ ATH5K_DBG(ah, ATH5K_DEBUG_DMA,
+ "tried to set RXDP while rx was active !\n");
+ return -EIO;
+ }
+
+ ath5k_hw_reg_write(ah, phys_addr, AR5K_RXDP);
+ return 0;
+}
+
+
+/**********\
+* Transmit *
+\**********/
+
+/**
+ * ath5k_hw_start_tx_dma() - Start DMA transmit for a specific queue
+ * @ah: The &struct ath5k_hw
+ * @queue: The hw queue number
+ *
+ * Start DMA transmit for a specific queue and since 5210 doesn't have
+ * QCU/DCU, set up queue parameters for 5210 here based on queue type (one
+ * queue for normal data and one queue for beacons). For queue setup
+ * on newer chips check out qcu.c. Returns -EINVAL if queue number is out
+ * of range or if queue is already disabled.
+ *
+ * NOTE: Must be called after setting up tx control descriptor for that
+ * queue (see below).
+ */
+int
+ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue)
+{
+ u32 tx_queue;
+
+ AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
+
+ /* Return if queue is declared inactive */
+ if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE)
+ return -EINVAL;
+
+ if (ah->ah_version == AR5K_AR5210) {
+ tx_queue = ath5k_hw_reg_read(ah, AR5K_CR);
+
+ /*
+ * Set the queue by type on 5210
+ */
+ switch (ah->ah_txq[queue].tqi_type) {
+ case AR5K_TX_QUEUE_DATA:
+ tx_queue |= AR5K_CR_TXE0 & ~AR5K_CR_TXD0;
+ break;
+ case AR5K_TX_QUEUE_BEACON:
+ tx_queue |= AR5K_CR_TXE1 & ~AR5K_CR_TXD1;
+ ath5k_hw_reg_write(ah, AR5K_BCR_TQ1V | AR5K_BCR_BDMAE,
+ AR5K_BSR);
+ break;
+ case AR5K_TX_QUEUE_CAB:
+ tx_queue |= AR5K_CR_TXE1 & ~AR5K_CR_TXD1;
+ ath5k_hw_reg_write(ah, AR5K_BCR_TQ1FV | AR5K_BCR_TQ1V |
+ AR5K_BCR_BDMAE, AR5K_BSR);
+ break;
+ default:
+ return -EINVAL;
+ }
+ /* Start queue */
+ ath5k_hw_reg_write(ah, tx_queue, AR5K_CR);
+ ath5k_hw_reg_read(ah, AR5K_CR);
+ } else {
+ /* Return if queue is disabled */
+ if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXD, queue))
+ return -EIO;
+
+ /* Start queue */
+ AR5K_REG_WRITE_Q(ah, AR5K_QCU_TXE, queue);
+ }
+
+ return 0;
+}
+
+/**
+ * ath5k_hw_stop_tx_dma() - Stop DMA transmit on a specific queue
+ * @ah: The &struct ath5k_hw
+ * @queue: The hw queue number
+ *
+ * Stop DMA transmit on a specific hw queue and drain queue so we don't
+ * have any pending frames. Returns -EBUSY if we still have pending frames,
+ * -EINVAL if queue number is out of range or inactive.
+ */
+static int
+ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue)
+{
+ unsigned int i = 40;
+ u32 tx_queue, pending;
+
+ AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
+
+ /* Return if queue is declared inactive */
+ if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE)
+ return -EINVAL;
+
+ if (ah->ah_version == AR5K_AR5210) {
+ tx_queue = ath5k_hw_reg_read(ah, AR5K_CR);
+
+ /*
+ * Set by queue type
+ */
+ switch (ah->ah_txq[queue].tqi_type) {
+ case AR5K_TX_QUEUE_DATA:
+ tx_queue |= AR5K_CR_TXD0 & ~AR5K_CR_TXE0;
+ break;
+ case AR5K_TX_QUEUE_BEACON:
+ case AR5K_TX_QUEUE_CAB:
+ /* XXX Fix me... */
+ tx_queue |= AR5K_CR_TXD1 & ~AR5K_CR_TXD1;
+ ath5k_hw_reg_write(ah, 0, AR5K_BSR);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* Stop queue */
+ ath5k_hw_reg_write(ah, tx_queue, AR5K_CR);
+ ath5k_hw_reg_read(ah, AR5K_CR);
+ } else {
+
+ /*
+ * Enable DCU early termination to quickly
+ * flush any pending frames from QCU
+ */
+ AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
+ AR5K_QCU_MISC_DCU_EARLY);
+
+ /*
+ * Schedule TX disable and wait until queue is empty
+ */
+ AR5K_REG_WRITE_Q(ah, AR5K_QCU_TXD, queue);
+
+ /* Wait for queue to stop */
+ for (i = 1000; i > 0 &&
+ (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, queue) != 0);
+ i--)
+ udelay(100);
+
+ if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, queue))
+ ATH5K_DBG(ah, ATH5K_DEBUG_DMA,
+ "queue %i didn't stop !\n", queue);
+
+ /* Check for pending frames */
+ i = 1000;
+ do {
+ pending = ath5k_hw_reg_read(ah,
+ AR5K_QUEUE_STATUS(queue)) &
+ AR5K_QCU_STS_FRMPENDCNT;
+ udelay(100);
+ } while (--i && pending);
+
+ /* For 2413+ order PCU to drop packets using
+ * QUIET mechanism */
+ if (ah->ah_mac_version >= (AR5K_SREV_AR2414 >> 4) &&
+ pending) {
+ /* Set periodicity and duration */
+ ath5k_hw_reg_write(ah,
+ AR5K_REG_SM(100, AR5K_QUIET_CTL2_QT_PER)|
+ AR5K_REG_SM(10, AR5K_QUIET_CTL2_QT_DUR),
+ AR5K_QUIET_CTL2);
+
+ /* Enable quiet period for current TSF */
+ ath5k_hw_reg_write(ah,
+ AR5K_QUIET_CTL1_QT_EN |
+ AR5K_REG_SM(ath5k_hw_reg_read(ah,
+ AR5K_TSF_L32_5211) >> 10,
+ AR5K_QUIET_CTL1_NEXT_QT_TSF),
+ AR5K_QUIET_CTL1);
+
+ /* Force channel idle high */
+ AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW_5211,
+ AR5K_DIAG_SW_CHANNEL_IDLE_HIGH);
+
+ /* Wait a while and disable mechanism */
+ udelay(400);
+ AR5K_REG_DISABLE_BITS(ah, AR5K_QUIET_CTL1,
+ AR5K_QUIET_CTL1_QT_EN);
+
+ /* Re-check for pending frames */
+ i = 100;
+ do {
+ pending = ath5k_hw_reg_read(ah,
+ AR5K_QUEUE_STATUS(queue)) &
+ AR5K_QCU_STS_FRMPENDCNT;
+ udelay(100);
+ } while (--i && pending);
+
+ AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW_5211,
+ AR5K_DIAG_SW_CHANNEL_IDLE_HIGH);
+
+ if (pending)
+ ATH5K_DBG(ah, ATH5K_DEBUG_DMA,
+ "quiet mechanism didn't work q:%i !\n",
+ queue);
+ }
+
+ /*
+ * Disable DCU early termination
+ */
+ AR5K_REG_DISABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
+ AR5K_QCU_MISC_DCU_EARLY);
+
+ /* Clear register */
+ ath5k_hw_reg_write(ah, 0, AR5K_QCU_TXD);
+ if (pending) {
+ ATH5K_DBG(ah, ATH5K_DEBUG_DMA,
+ "tx dma didn't stop (q:%i, frm:%i) !\n",
+ queue, pending);
+ return -EBUSY;
+ }
+ }
+
+ /* TODO: Check for success on 5210 else return error */
+ return 0;
+}
+
+/**
+ * ath5k_hw_stop_beacon_queue() - Stop beacon queue
+ * @ah: The &struct ath5k_hw
+ * @queue: The queue number
+ *
+ * Returns -EIO if queue didn't stop
+ */
+int
+ath5k_hw_stop_beacon_queue(struct ath5k_hw *ah, unsigned int queue)
+{
+ int ret;
+ ret = ath5k_hw_stop_tx_dma(ah, queue);
+ if (ret) {
+ ATH5K_DBG(ah, ATH5K_DEBUG_DMA,
+ "beacon queue didn't stop !\n");
+ return -EIO;
+ }
+ return 0;
+}
+
+/**
+ * ath5k_hw_get_txdp() - Get TX Descriptor's address for a specific queue
+ * @ah: The &struct ath5k_hw
+ * @queue: The hw queue number
+ *
+ * Get TX descriptor's address for a specific queue. For 5210 we ignore
+ * the queue number and use tx queue type since we only have 2 queues.
+ * We use TXDP0 for normal data queue and TXDP1 for beacon queue.
+ * For newer chips with QCU/DCU we just read the corresponding TXDP register.
+ *
+ * XXX: Is TXDP read and clear ?
+ */
+u32
+ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue)
+{
+ u16 tx_reg;
+
+ AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
+
+ /*
+ * Get the transmit queue descriptor pointer from the selected queue
+ */
+ /*5210 doesn't have QCU*/
+ if (ah->ah_version == AR5K_AR5210) {
+ switch (ah->ah_txq[queue].tqi_type) {
+ case AR5K_TX_QUEUE_DATA:
+ tx_reg = AR5K_NOQCU_TXDP0;
+ break;
+ case AR5K_TX_QUEUE_BEACON:
+ case AR5K_TX_QUEUE_CAB:
+ tx_reg = AR5K_NOQCU_TXDP1;
+ break;
+ default:
+ return 0xffffffff;
+ }
+ } else {
+ tx_reg = AR5K_QUEUE_TXDP(queue);
+ }
+
+ return ath5k_hw_reg_read(ah, tx_reg);
+}
+
+/**
+ * ath5k_hw_set_txdp() - Set TX Descriptor's address for a specific queue
+ * @ah: The &struct ath5k_hw
+ * @queue: The hw queue number
+ * @phys_addr: The physical address
+ *
+ * Set TX descriptor's address for a specific queue. For 5210 we ignore
+ * the queue number and we use tx queue type since we only have 2 queues
+ * so as above we use TXDP0 for normal data queue and TXDP1 for beacon queue.
+ * For newer chips with QCU/DCU we just set the corresponding TXDP register.
+ * Returns -EINVAL if queue type is invalid for 5210 and -EIO if queue is still
+ * active.
+ */
+int
+ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr)
+{
+ u16 tx_reg;
+
+ AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
+
+ /*
+ * Set the transmit queue descriptor pointer register by type
+ * on 5210
+ */
+ if (ah->ah_version == AR5K_AR5210) {
+ switch (ah->ah_txq[queue].tqi_type) {
+ case AR5K_TX_QUEUE_DATA:
+ tx_reg = AR5K_NOQCU_TXDP0;
+ break;
+ case AR5K_TX_QUEUE_BEACON:
+ case AR5K_TX_QUEUE_CAB:
+ tx_reg = AR5K_NOQCU_TXDP1;
+ break;
+ default:
+ return -EINVAL;
+ }
+ } else {
+ /*
+ * Set the transmit queue descriptor pointer for
+ * the selected queue on QCU for 5211+
+ * (this won't work if the queue is still active)
+ */
+ if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, queue))
+ return -EIO;
+
+ tx_reg = AR5K_QUEUE_TXDP(queue);
+ }
+
+ /* Set descriptor pointer */
+ ath5k_hw_reg_write(ah, phys_addr, tx_reg);
+
+ return 0;
+}
+
+/**
+ * ath5k_hw_update_tx_triglevel() - Update tx trigger level
+ * @ah: The &struct ath5k_hw
+ * @increase: Flag to force increase of trigger level
+ *
+ * This function increases/decreases the tx trigger level for the tx fifo
+ * buffer (aka FIFO threshold) that is used to indicate when PCU flushes
+ * the buffer and transmits its data. Lowering this results sending small
+ * frames more quickly but can lead to tx underruns, raising it a lot can
+ * result other problems. Right now we start with the lowest possible
+ * (64Bytes) and if we get tx underrun we increase it using the increase
+ * flag. Returns -EIO if we have reached maximum/minimum.
+ *
+ * XXX: Link this with tx DMA size ?
+ * XXX2: Use it to save interrupts ?
+ */
+int
+ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase)
+{
+ u32 trigger_level, imr;
+ int ret = -EIO;
+
+ /*
+ * Disable interrupts by setting the mask
+ */
+ imr = ath5k_hw_set_imr(ah, ah->ah_imr & ~AR5K_INT_GLOBAL);
+
+ trigger_level = AR5K_REG_MS(ath5k_hw_reg_read(ah, AR5K_TXCFG),
+ AR5K_TXCFG_TXFULL);
+
+ if (!increase) {
+ if (--trigger_level < AR5K_TUNE_MIN_TX_FIFO_THRES)
+ goto done;
+ } else
+ trigger_level +=
+ ((AR5K_TUNE_MAX_TX_FIFO_THRES - trigger_level) / 2);
+
+ /*
+ * Update trigger level on success
+ */
+ if (ah->ah_version == AR5K_AR5210)
+ ath5k_hw_reg_write(ah, trigger_level, AR5K_TRIG_LVL);
+ else
+ AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG,
+ AR5K_TXCFG_TXFULL, trigger_level);
+
+ ret = 0;
+
+done:
+ /*
+ * Restore interrupt mask
+ */
+ ath5k_hw_set_imr(ah, imr);
+
+ return ret;
+}
+
+
+/*******************\
+* Interrupt masking *
+\*******************/
+
+/**
+ * ath5k_hw_is_intr_pending() - Check if we have pending interrupts
+ * @ah: The &struct ath5k_hw
+ *
+ * Check if we have pending interrupts to process. Returns 1 if we
+ * have pending interrupts and 0 if we haven't.
+ */
+bool
+ath5k_hw_is_intr_pending(struct ath5k_hw *ah)
+{
+ return ath5k_hw_reg_read(ah, AR5K_INTPEND) == 1 ? 1 : 0;
+}
+
+/**
+ * ath5k_hw_get_isr() - Get interrupt status
+ * @ah: The @struct ath5k_hw
+ * @interrupt_mask: Driver's interrupt mask used to filter out
+ * interrupts in sw.
+ *
+ * This function is used inside our interrupt handler to determine the reason
+ * for the interrupt by reading Primary Interrupt Status Register. Returns an
+ * abstract interrupt status mask which is mostly ISR with some uncommon bits
+ * being mapped on some standard non hw-specific positions
+ * (check out &ath5k_int).
+ *
+ * NOTE: We do write-to-clear, so the active PISR/SISR bits at the time this
+ * function gets called are cleared on return.
+ */
+int
+ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask)
+{
+ u32 data = 0;
+
+ /*
+ * Read interrupt status from Primary Interrupt
+ * Register.
+ *
+ * Note: PISR/SISR Not available on 5210
+ */
+ if (ah->ah_version == AR5K_AR5210) {
+ u32 isr = 0;
+ isr = ath5k_hw_reg_read(ah, AR5K_ISR);
+ if (unlikely(isr == AR5K_INT_NOCARD)) {
+ *interrupt_mask = isr;
+ return -ENODEV;
+ }
+
+ /*
+ * Filter out the non-common bits from the interrupt
+ * status.
+ */
+ *interrupt_mask = (isr & AR5K_INT_COMMON) & ah->ah_imr;
+
+ /* Hanlde INT_FATAL */
+ if (unlikely(isr & (AR5K_ISR_SSERR | AR5K_ISR_MCABT
+ | AR5K_ISR_DPERR)))
+ *interrupt_mask |= AR5K_INT_FATAL;
+
+ /*
+ * XXX: BMISS interrupts may occur after association.
+ * I found this on 5210 code but it needs testing. If this is
+ * true we should disable them before assoc and re-enable them
+ * after a successful assoc + some jiffies.
+ interrupt_mask &= ~AR5K_INT_BMISS;
+ */
+
+ data = isr;
+ } else {
+ u32 pisr = 0;
+ u32 pisr_clear = 0;
+ u32 sisr0 = 0;
+ u32 sisr1 = 0;
+ u32 sisr2 = 0;
+ u32 sisr3 = 0;
+ u32 sisr4 = 0;
+
+ /* Read PISR and SISRs... */
+ pisr = ath5k_hw_reg_read(ah, AR5K_PISR);
+ if (unlikely(pisr == AR5K_INT_NOCARD)) {
+ *interrupt_mask = pisr;
+ return -ENODEV;
+ }
+
+ sisr0 = ath5k_hw_reg_read(ah, AR5K_SISR0);
+ sisr1 = ath5k_hw_reg_read(ah, AR5K_SISR1);
+ sisr2 = ath5k_hw_reg_read(ah, AR5K_SISR2);
+ sisr3 = ath5k_hw_reg_read(ah, AR5K_SISR3);
+ sisr4 = ath5k_hw_reg_read(ah, AR5K_SISR4);
+
+ /*
+ * PISR holds the logical OR of interrupt bits
+ * from SISR registers:
+ *
+ * TXOK and TXDESC -> Logical OR of TXOK and TXDESC
+ * per-queue bits on SISR0
+ *
+ * TXERR and TXEOL -> Logical OR of TXERR and TXEOL
+ * per-queue bits on SISR1
+ *
+ * TXURN -> Logical OR of TXURN per-queue bits on SISR2
+ *
+ * HIUERR -> Logical OR of MCABT, SSERR and DPER bits on SISR2
+ *
+ * BCNMISC -> Logical OR of TIM, CAB_END, DTIM_SYNC
+ * BCN_TIMEOUT, CAB_TIMEOUT and DTIM
+ * (and TSFOOR ?) bits on SISR2
+ *
+ * QCBRORN and QCBRURN -> Logical OR of QCBRORN and
+ * QCBRURN per-queue bits on SISR3
+ * QTRIG -> Logical OR of QTRIG per-queue bits on SISR4
+ *
+ * If we clean these bits on PISR we 'll also clear all
+ * related bits from SISRs, e.g. if we write the TXOK bit on
+ * PISR we 'll clean all TXOK bits from SISR0 so if a new TXOK
+ * interrupt got fired for another queue while we were reading
+ * the interrupt registers and we write back the TXOK bit on
+ * PISR we 'll lose it. So make sure that we don't write back
+ * on PISR any bits that come from SISRs. Clearing them from
+ * SISRs will also clear PISR so no need to worry here.
+ */
+
+ /* XXX: There seems to be an issue on some cards
+ * with tx interrupt flags not being updated
+ * on PISR despite that all Tx interrupt bits
+ * are cleared on SISRs. Since we handle all
+ * Tx queues all together it shouldn't be an
+ * issue if we clear Tx interrupt flags also
+ * on PISR to avoid that.
+ */
+ pisr_clear = (pisr & ~AR5K_ISR_BITS_FROM_SISRS) |
+ (pisr & AR5K_INT_TX_ALL);
+
+ /*
+ * Write to clear them...
+ * Note: This means that each bit we write back
+ * to the registers will get cleared, leaving the
+ * rest unaffected. So this won't affect new interrupts
+ * we didn't catch while reading/processing, we 'll get
+ * them next time get_isr gets called.
+ */
+ ath5k_hw_reg_write(ah, sisr0, AR5K_SISR0);
+ ath5k_hw_reg_write(ah, sisr1, AR5K_SISR1);
+ ath5k_hw_reg_write(ah, sisr2, AR5K_SISR2);
+ ath5k_hw_reg_write(ah, sisr3, AR5K_SISR3);
+ ath5k_hw_reg_write(ah, sisr4, AR5K_SISR4);
+ ath5k_hw_reg_write(ah, pisr_clear, AR5K_PISR);
+ /* Flush previous write */
+ ath5k_hw_reg_read(ah, AR5K_PISR);
+
+ /*
+ * Filter out the non-common bits from the interrupt
+ * status.
+ */
+ *interrupt_mask = (pisr & AR5K_INT_COMMON) & ah->ah_imr;
+
+ ah->ah_txq_isr_txok_all = 0;
+
+ /* We treat TXOK,TXDESC, TXERR and TXEOL
+ * the same way (schedule the tx tasklet)
+ * so we track them all together per queue */
+ if (pisr & AR5K_ISR_TXOK)
+ ah->ah_txq_isr_txok_all |= AR5K_REG_MS(sisr0,
+ AR5K_SISR0_QCU_TXOK);
+
+ if (pisr & AR5K_ISR_TXDESC)
+ ah->ah_txq_isr_txok_all |= AR5K_REG_MS(sisr0,
+ AR5K_SISR0_QCU_TXDESC);
+
+ if (pisr & AR5K_ISR_TXERR)
+ ah->ah_txq_isr_txok_all |= AR5K_REG_MS(sisr1,
+ AR5K_SISR1_QCU_TXERR);
+
+ if (pisr & AR5K_ISR_TXEOL)
+ ah->ah_txq_isr_txok_all |= AR5K_REG_MS(sisr1,
+ AR5K_SISR1_QCU_TXEOL);
+
+ /* Misc Beacon related interrupts */
+
+ /* For AR5211 */
+ if (pisr & AR5K_ISR_TIM)
+ *interrupt_mask |= AR5K_INT_TIM;
+
+ /* For AR5212+ */
+ if (pisr & AR5K_ISR_BCNMISC) {
+ if (sisr2 & AR5K_SISR2_TIM)
+ *interrupt_mask |= AR5K_INT_TIM;
+ if (sisr2 & AR5K_SISR2_DTIM)
+ *interrupt_mask |= AR5K_INT_DTIM;
+ if (sisr2 & AR5K_SISR2_DTIM_SYNC)
+ *interrupt_mask |= AR5K_INT_DTIM_SYNC;
+ if (sisr2 & AR5K_SISR2_BCN_TIMEOUT)
+ *interrupt_mask |= AR5K_INT_BCN_TIMEOUT;
+ if (sisr2 & AR5K_SISR2_CAB_TIMEOUT)
+ *interrupt_mask |= AR5K_INT_CAB_TIMEOUT;
+ }
+
+ /* Below interrupts are unlikely to happen */
+
+ /* HIU = Host Interface Unit (PCI etc)
+ * Can be one of MCABT, SSERR, DPERR from SISR2 */
+ if (unlikely(pisr & (AR5K_ISR_HIUERR)))
+ *interrupt_mask |= AR5K_INT_FATAL;
+
+ /*Beacon Not Ready*/
+ if (unlikely(pisr & (AR5K_ISR_BNR)))
+ *interrupt_mask |= AR5K_INT_BNR;
+
+ /* A queue got CBR overrun */
+ if (unlikely(pisr & (AR5K_ISR_QCBRORN)))
+ *interrupt_mask |= AR5K_INT_QCBRORN;
+
+ /* A queue got CBR underrun */
+ if (unlikely(pisr & (AR5K_ISR_QCBRURN)))
+ *interrupt_mask |= AR5K_INT_QCBRURN;
+
+ /* A queue got triggered */
+ if (unlikely(pisr & (AR5K_ISR_QTRIG)))
+ *interrupt_mask |= AR5K_INT_QTRIG;
+
+ data = pisr;
+ }
+
+ /*
+ * In case we didn't handle anything,
+ * print the register value.
+ */
+ if (unlikely(*interrupt_mask == 0 && net_ratelimit()))
+ ATH5K_PRINTF("ISR: 0x%08x IMR: 0x%08x\n", data, ah->ah_imr);
+
+ return 0;
+}
+
+/**
+ * ath5k_hw_set_imr() - Set interrupt mask
+ * @ah: The &struct ath5k_hw
+ * @new_mask: The new interrupt mask to be set
+ *
+ * Set the interrupt mask in hw to save interrupts. We do that by mapping
+ * ath5k_int bits to hw-specific bits to remove abstraction and writing
+ * Interrupt Mask Register.
+ */
+enum ath5k_int
+ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask)
+{
+ enum ath5k_int old_mask, int_mask;
+
+ old_mask = ah->ah_imr;
+
+ /*
+ * Disable card interrupts to prevent any race conditions
+ * (they will be re-enabled afterwards if AR5K_INT GLOBAL
+ * is set again on the new mask).
+ */
+ if (old_mask & AR5K_INT_GLOBAL) {
+ ath5k_hw_reg_write(ah, AR5K_IER_DISABLE, AR5K_IER);
+ ath5k_hw_reg_read(ah, AR5K_IER);
+ }
+
+ /*
+ * Add additional, chipset-dependent interrupt mask flags
+ * and write them to the IMR (interrupt mask register).
+ */
+ int_mask = new_mask & AR5K_INT_COMMON;
+
+ if (ah->ah_version != AR5K_AR5210) {
+ /* Preserve per queue TXURN interrupt mask */
+ u32 simr2 = ath5k_hw_reg_read(ah, AR5K_SIMR2)
+ & AR5K_SIMR2_QCU_TXURN;
+
+ /* Fatal interrupt abstraction for 5211+ */
+ if (new_mask & AR5K_INT_FATAL) {
+ int_mask |= AR5K_IMR_HIUERR;
+ simr2 |= (AR5K_SIMR2_MCABT | AR5K_SIMR2_SSERR
+ | AR5K_SIMR2_DPERR);
+ }
+
+ /* Misc beacon related interrupts */
+ if (new_mask & AR5K_INT_TIM)
+ int_mask |= AR5K_IMR_TIM;
+
+ if (new_mask & AR5K_INT_TIM)
+ simr2 |= AR5K_SISR2_TIM;
+ if (new_mask & AR5K_INT_DTIM)
+ simr2 |= AR5K_SISR2_DTIM;
+ if (new_mask & AR5K_INT_DTIM_SYNC)
+ simr2 |= AR5K_SISR2_DTIM_SYNC;
+ if (new_mask & AR5K_INT_BCN_TIMEOUT)
+ simr2 |= AR5K_SISR2_BCN_TIMEOUT;
+ if (new_mask & AR5K_INT_CAB_TIMEOUT)
+ simr2 |= AR5K_SISR2_CAB_TIMEOUT;
+
+ /*Beacon Not Ready*/
+ if (new_mask & AR5K_INT_BNR)
+ int_mask |= AR5K_INT_BNR;
+
+ /* Note: Per queue interrupt masks
+ * are set via ath5k_hw_reset_tx_queue() (qcu.c) */
+ ath5k_hw_reg_write(ah, int_mask, AR5K_PIMR);
+ ath5k_hw_reg_write(ah, simr2, AR5K_SIMR2);
+
+ } else {
+ /* Fatal interrupt abstraction for 5210 */
+ if (new_mask & AR5K_INT_FATAL)
+ int_mask |= (AR5K_IMR_SSERR | AR5K_IMR_MCABT
+ | AR5K_IMR_HIUERR | AR5K_IMR_DPERR);
+
+ /* Only common interrupts left for 5210 (no SIMRs) */
+ ath5k_hw_reg_write(ah, int_mask, AR5K_IMR);
+ }
+
+ /* If RXNOFRM interrupt is masked disable it
+ * by setting AR5K_RXNOFRM to zero */
+ if (!(new_mask & AR5K_INT_RXNOFRM))
+ ath5k_hw_reg_write(ah, 0, AR5K_RXNOFRM);
+
+ /* Store new interrupt mask */
+ ah->ah_imr = new_mask;
+
+ /* ..re-enable interrupts if AR5K_INT_GLOBAL is set */
+ if (new_mask & AR5K_INT_GLOBAL) {
+ ath5k_hw_reg_write(ah, AR5K_IER_ENABLE, AR5K_IER);
+ ath5k_hw_reg_read(ah, AR5K_IER);
+ }
+
+ return old_mask;
+}
+
+
+/********************\
+ Init/Stop functions
+\********************/
+
+/**
+ * ath5k_hw_dma_init() - Initialize DMA unit
+ * @ah: The &struct ath5k_hw
+ *
+ * Set DMA size and pre-enable interrupts
+ * (driver handles tx/rx buffer setup and
+ * dma start/stop)
+ *
+ * XXX: Save/restore RXDP/TXDP registers ?
+ */
+void
+ath5k_hw_dma_init(struct ath5k_hw *ah)
+{
+ /*
+ * Set Rx/Tx DMA Configuration
+ *
+ * Set standard DMA size (128). Note that
+ * a DMA size of 512 causes rx overruns and tx errors
+ * on pci-e cards (tested on 5424 but since rx overruns
+ * also occur on 5416/5418 with madwifi we set 128
+ * for all PCI-E cards to be safe).
+ *
+ * XXX: need to check 5210 for this
+ * TODO: Check out tx trigger level, it's always 64 on dumps but I
+ * guess we can tweak it and see how it goes ;-)
+ */
+ if (ah->ah_version != AR5K_AR5210) {
+ AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG,
+ AR5K_TXCFG_SDMAMR, AR5K_DMASIZE_128B);
+ AR5K_REG_WRITE_BITS(ah, AR5K_RXCFG,
+ AR5K_RXCFG_SDMAMW, AR5K_DMASIZE_128B);
+ }
+
+ /* Pre-enable interrupts on 5211/5212*/
+ if (ah->ah_version != AR5K_AR5210)
+ ath5k_hw_set_imr(ah, ah->ah_imr);
+
+}
+
+/**
+ * ath5k_hw_dma_stop() - stop DMA unit
+ * @ah: The &struct ath5k_hw
+ *
+ * Stop tx/rx DMA and interrupts. Returns
+ * -EBUSY if tx or rx dma failed to stop.
+ *
+ * XXX: Sometimes DMA unit hangs and we have
+ * stuck frames on tx queues, only a reset
+ * can fix that.
+ */
+int
+ath5k_hw_dma_stop(struct ath5k_hw *ah)
+{
+ int i, qmax, err;
+ err = 0;
+
+ /* Disable interrupts */
+ ath5k_hw_set_imr(ah, 0);
+
+ /* Stop rx dma */
+ err = ath5k_hw_stop_rx_dma(ah);
+ if (err)
+ return err;
+
+ /* Clear any pending interrupts
+ * and disable tx dma */
+ if (ah->ah_version != AR5K_AR5210) {
+ ath5k_hw_reg_write(ah, 0xffffffff, AR5K_PISR);
+ qmax = AR5K_NUM_TX_QUEUES;
+ } else {
+ /* PISR/SISR Not available on 5210 */
+ ath5k_hw_reg_read(ah, AR5K_ISR);
+ qmax = AR5K_NUM_TX_QUEUES_NOQCU;
+ }
+
+ for (i = 0; i < qmax; i++) {
+ err = ath5k_hw_stop_tx_dma(ah, i);
+ /* -EINVAL -> queue inactive */
+ if (err && err != -EINVAL)
+ return err;
+ }
+
+ return 0;
+}
diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c
new file mode 100644
index 000000000..58d3e86f6
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/eeprom.c
@@ -0,0 +1,1799 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2009 Nick Kossifidis <mickflemm@gmail.com>
+ * Copyright (c) 2008-2009 Felix Fietkau <nbd@openwrt.org>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/*************************************\
+* EEPROM access functions and helpers *
+\*************************************/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/slab.h>
+
+#include "ath5k.h"
+#include "reg.h"
+#include "debug.h"
+
+
+/******************\
+* Helper functions *
+\******************/
+
+/*
+ * Translate binary channel representation in EEPROM to frequency
+ */
+static u16 ath5k_eeprom_bin2freq(struct ath5k_eeprom_info *ee, u16 bin,
+ unsigned int mode)
+{
+ u16 val;
+
+ if (bin == AR5K_EEPROM_CHANNEL_DIS)
+ return bin;
+
+ if (mode == AR5K_EEPROM_MODE_11A) {
+ if (ee->ee_version > AR5K_EEPROM_VERSION_3_2)
+ val = (5 * bin) + 4800;
+ else
+ val = bin > 62 ? (10 * 62) + (5 * (bin - 62)) + 5100 :
+ (bin * 10) + 5100;
+ } else {
+ if (ee->ee_version > AR5K_EEPROM_VERSION_3_2)
+ val = bin + 2300;
+ else
+ val = bin + 2400;
+ }
+
+ return val;
+}
+
+
+/*********\
+* Parsers *
+\*********/
+
+/*
+ * Initialize eeprom & capabilities structs
+ */
+static int
+ath5k_eeprom_init_header(struct ath5k_hw *ah)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ u16 val;
+ u32 cksum, offset, eep_max = AR5K_EEPROM_INFO_MAX;
+
+ /*
+ * Read values from EEPROM and store them in the capability structure
+ */
+ AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MAGIC, ee_magic);
+ AR5K_EEPROM_READ_HDR(AR5K_EEPROM_PROTECT, ee_protect);
+ AR5K_EEPROM_READ_HDR(AR5K_EEPROM_REG_DOMAIN, ee_regdomain);
+ AR5K_EEPROM_READ_HDR(AR5K_EEPROM_VERSION, ee_version);
+ AR5K_EEPROM_READ_HDR(AR5K_EEPROM_HDR, ee_header);
+
+ /* Return if we have an old EEPROM */
+ if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_0)
+ return 0;
+
+ /*
+ * Validate the checksum of the EEPROM date. There are some
+ * devices with invalid EEPROMs.
+ */
+ AR5K_EEPROM_READ(AR5K_EEPROM_SIZE_UPPER, val);
+ if (val) {
+ eep_max = (val & AR5K_EEPROM_SIZE_UPPER_MASK) <<
+ AR5K_EEPROM_SIZE_ENDLOC_SHIFT;
+ AR5K_EEPROM_READ(AR5K_EEPROM_SIZE_LOWER, val);
+ eep_max = (eep_max | val) - AR5K_EEPROM_INFO_BASE;
+
+ /*
+ * Fail safe check to prevent stupid loops due
+ * to busted EEPROMs. XXX: This value is likely too
+ * big still, waiting on a better value.
+ */
+ if (eep_max > (3 * AR5K_EEPROM_INFO_MAX)) {
+ ATH5K_ERR(ah, "Invalid max custom EEPROM size: "
+ "%d (0x%04x) max expected: %d (0x%04x)\n",
+ eep_max, eep_max,
+ 3 * AR5K_EEPROM_INFO_MAX,
+ 3 * AR5K_EEPROM_INFO_MAX);
+ return -EIO;
+ }
+ }
+
+ for (cksum = 0, offset = 0; offset < eep_max; offset++) {
+ AR5K_EEPROM_READ(AR5K_EEPROM_INFO(offset), val);
+ cksum ^= val;
+ }
+ if (cksum != AR5K_EEPROM_INFO_CKSUM) {
+ ATH5K_ERR(ah, "Invalid EEPROM "
+ "checksum: 0x%04x eep_max: 0x%04x (%s)\n",
+ cksum, eep_max,
+ eep_max == AR5K_EEPROM_INFO_MAX ?
+ "default size" : "custom size");
+ return -EIO;
+ }
+
+ AR5K_EEPROM_READ_HDR(AR5K_EEPROM_ANT_GAIN(ah->ah_ee_version),
+ ee_ant_gain);
+
+ if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) {
+ AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC0, ee_misc0);
+ AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC1, ee_misc1);
+
+ /* XXX: Don't know which versions include these two */
+ AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC2, ee_misc2);
+
+ if (ee->ee_version >= AR5K_EEPROM_VERSION_4_3)
+ AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC3, ee_misc3);
+
+ if (ee->ee_version >= AR5K_EEPROM_VERSION_5_0) {
+ AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC4, ee_misc4);
+ AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC5, ee_misc5);
+ AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC6, ee_misc6);
+ }
+ }
+
+ if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_3) {
+ AR5K_EEPROM_READ(AR5K_EEPROM_OBDB0_2GHZ, val);
+ ee->ee_ob[AR5K_EEPROM_MODE_11B][0] = val & 0x7;
+ ee->ee_db[AR5K_EEPROM_MODE_11B][0] = (val >> 3) & 0x7;
+
+ AR5K_EEPROM_READ(AR5K_EEPROM_OBDB1_2GHZ, val);
+ ee->ee_ob[AR5K_EEPROM_MODE_11G][0] = val & 0x7;
+ ee->ee_db[AR5K_EEPROM_MODE_11G][0] = (val >> 3) & 0x7;
+ }
+
+ AR5K_EEPROM_READ(AR5K_EEPROM_IS_HB63, val);
+
+ if ((ah->ah_mac_version == (AR5K_SREV_AR2425 >> 4)) && val)
+ ee->ee_is_hb63 = true;
+ else
+ ee->ee_is_hb63 = false;
+
+ AR5K_EEPROM_READ(AR5K_EEPROM_RFKILL, val);
+ ee->ee_rfkill_pin = (u8) AR5K_REG_MS(val, AR5K_EEPROM_RFKILL_GPIO_SEL);
+ ee->ee_rfkill_pol = val & AR5K_EEPROM_RFKILL_POLARITY ? true : false;
+
+ /* Check if PCIE_OFFSET points to PCIE_SERDES_SECTION
+ * and enable serdes programming if needed.
+ *
+ * XXX: Serdes values seem to be fixed so
+ * no need to read them here, we write them
+ * during ath5k_hw_init */
+ AR5K_EEPROM_READ(AR5K_EEPROM_PCIE_OFFSET, val);
+ ee->ee_serdes = (val == AR5K_EEPROM_PCIE_SERDES_SECTION) ?
+ true : false;
+
+ return 0;
+}
+
+
+/*
+ * Read antenna infos from eeprom
+ */
+static int ath5k_eeprom_read_ants(struct ath5k_hw *ah, u32 *offset,
+ unsigned int mode)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ u32 o = *offset;
+ u16 val;
+ int i = 0;
+
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_switch_settling[mode] = (val >> 8) & 0x7f;
+ ee->ee_atn_tx_rx[mode] = (val >> 2) & 0x3f;
+ ee->ee_ant_control[mode][i] = (val << 4) & 0x3f;
+
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_ant_control[mode][i++] |= (val >> 12) & 0xf;
+ ee->ee_ant_control[mode][i++] = (val >> 6) & 0x3f;
+ ee->ee_ant_control[mode][i++] = val & 0x3f;
+
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_ant_control[mode][i++] = (val >> 10) & 0x3f;
+ ee->ee_ant_control[mode][i++] = (val >> 4) & 0x3f;
+ ee->ee_ant_control[mode][i] = (val << 2) & 0x3f;
+
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_ant_control[mode][i++] |= (val >> 14) & 0x3;
+ ee->ee_ant_control[mode][i++] = (val >> 8) & 0x3f;
+ ee->ee_ant_control[mode][i++] = (val >> 2) & 0x3f;
+ ee->ee_ant_control[mode][i] = (val << 4) & 0x3f;
+
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_ant_control[mode][i++] |= (val >> 12) & 0xf;
+ ee->ee_ant_control[mode][i++] = (val >> 6) & 0x3f;
+ ee->ee_ant_control[mode][i++] = val & 0x3f;
+
+ /* Get antenna switch tables */
+ ah->ah_ant_ctl[mode][AR5K_ANT_CTL] =
+ (ee->ee_ant_control[mode][0] << 4);
+ ah->ah_ant_ctl[mode][AR5K_ANT_SWTABLE_A] =
+ ee->ee_ant_control[mode][1] |
+ (ee->ee_ant_control[mode][2] << 6) |
+ (ee->ee_ant_control[mode][3] << 12) |
+ (ee->ee_ant_control[mode][4] << 18) |
+ (ee->ee_ant_control[mode][5] << 24);
+ ah->ah_ant_ctl[mode][AR5K_ANT_SWTABLE_B] =
+ ee->ee_ant_control[mode][6] |
+ (ee->ee_ant_control[mode][7] << 6) |
+ (ee->ee_ant_control[mode][8] << 12) |
+ (ee->ee_ant_control[mode][9] << 18) |
+ (ee->ee_ant_control[mode][10] << 24);
+
+ /* return new offset */
+ *offset = o;
+
+ return 0;
+}
+
+/*
+ * Read supported modes and some mode-specific calibration data
+ * from eeprom
+ */
+static int ath5k_eeprom_read_modes(struct ath5k_hw *ah, u32 *offset,
+ unsigned int mode)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ u32 o = *offset;
+ u16 val;
+
+ ee->ee_n_piers[mode] = 0;
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_adc_desired_size[mode] = (s8)((val >> 8) & 0xff);
+ switch (mode) {
+ case AR5K_EEPROM_MODE_11A:
+ ee->ee_ob[mode][3] = (val >> 5) & 0x7;
+ ee->ee_db[mode][3] = (val >> 2) & 0x7;
+ ee->ee_ob[mode][2] = (val << 1) & 0x7;
+
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_ob[mode][2] |= (val >> 15) & 0x1;
+ ee->ee_db[mode][2] = (val >> 12) & 0x7;
+ ee->ee_ob[mode][1] = (val >> 9) & 0x7;
+ ee->ee_db[mode][1] = (val >> 6) & 0x7;
+ ee->ee_ob[mode][0] = (val >> 3) & 0x7;
+ ee->ee_db[mode][0] = val & 0x7;
+ break;
+ case AR5K_EEPROM_MODE_11G:
+ case AR5K_EEPROM_MODE_11B:
+ ee->ee_ob[mode][1] = (val >> 4) & 0x7;
+ ee->ee_db[mode][1] = val & 0x7;
+ break;
+ }
+
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_tx_end2xlna_enable[mode] = (val >> 8) & 0xff;
+ ee->ee_thr_62[mode] = val & 0xff;
+
+ if (ah->ah_ee_version <= AR5K_EEPROM_VERSION_3_2)
+ ee->ee_thr_62[mode] = mode == AR5K_EEPROM_MODE_11A ? 15 : 28;
+
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_tx_end2xpa_disable[mode] = (val >> 8) & 0xff;
+ ee->ee_tx_frm2xpa_enable[mode] = val & 0xff;
+
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_pga_desired_size[mode] = (val >> 8) & 0xff;
+
+ if ((val & 0xff) & 0x80)
+ ee->ee_noise_floor_thr[mode] = -((((val & 0xff) ^ 0xff)) + 1);
+ else
+ ee->ee_noise_floor_thr[mode] = val & 0xff;
+
+ if (ah->ah_ee_version <= AR5K_EEPROM_VERSION_3_2)
+ ee->ee_noise_floor_thr[mode] =
+ mode == AR5K_EEPROM_MODE_11A ? -54 : -1;
+
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_xlna_gain[mode] = (val >> 5) & 0xff;
+ ee->ee_x_gain[mode] = (val >> 1) & 0xf;
+ ee->ee_xpd[mode] = val & 0x1;
+
+ if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0 &&
+ mode != AR5K_EEPROM_MODE_11B)
+ ee->ee_fixed_bias[mode] = (val >> 13) & 0x1;
+
+ if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_3_3) {
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_false_detect[mode] = (val >> 6) & 0x7f;
+
+ if (mode == AR5K_EEPROM_MODE_11A)
+ ee->ee_xr_power[mode] = val & 0x3f;
+ else {
+ /* b_DB_11[bg] and b_OB_11[bg] */
+ ee->ee_ob[mode][0] = val & 0x7;
+ ee->ee_db[mode][0] = (val >> 3) & 0x7;
+ }
+ }
+
+ if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_4) {
+ ee->ee_i_gain[mode] = AR5K_EEPROM_I_GAIN;
+ ee->ee_cck_ofdm_power_delta = AR5K_EEPROM_CCK_OFDM_DELTA;
+ } else {
+ ee->ee_i_gain[mode] = (val >> 13) & 0x7;
+
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_i_gain[mode] |= (val << 3) & 0x38;
+
+ if (mode == AR5K_EEPROM_MODE_11G) {
+ ee->ee_cck_ofdm_power_delta = (val >> 3) & 0xff;
+ if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_6)
+ ee->ee_scaled_cck_delta = (val >> 11) & 0x1f;
+ }
+ }
+
+ if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0 &&
+ mode == AR5K_EEPROM_MODE_11A) {
+ ee->ee_i_cal[mode] = (val >> 8) & 0x3f;
+ ee->ee_q_cal[mode] = (val >> 3) & 0x1f;
+ }
+
+ if (ah->ah_ee_version < AR5K_EEPROM_VERSION_4_0)
+ goto done;
+
+ /* Note: >= v5 have bg freq piers on another location
+ * so these freq piers are ignored for >= v5 (should be 0xff
+ * anyway) */
+ switch (mode) {
+ case AR5K_EEPROM_MODE_11A:
+ if (ah->ah_ee_version < AR5K_EEPROM_VERSION_4_1)
+ break;
+
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_margin_tx_rx[mode] = val & 0x3f;
+ break;
+ case AR5K_EEPROM_MODE_11B:
+ AR5K_EEPROM_READ(o++, val);
+
+ ee->ee_pwr_cal_b[0].freq =
+ ath5k_eeprom_bin2freq(ee, val & 0xff, mode);
+ if (ee->ee_pwr_cal_b[0].freq != AR5K_EEPROM_CHANNEL_DIS)
+ ee->ee_n_piers[mode]++;
+
+ ee->ee_pwr_cal_b[1].freq =
+ ath5k_eeprom_bin2freq(ee, (val >> 8) & 0xff, mode);
+ if (ee->ee_pwr_cal_b[1].freq != AR5K_EEPROM_CHANNEL_DIS)
+ ee->ee_n_piers[mode]++;
+
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_pwr_cal_b[2].freq =
+ ath5k_eeprom_bin2freq(ee, val & 0xff, mode);
+ if (ee->ee_pwr_cal_b[2].freq != AR5K_EEPROM_CHANNEL_DIS)
+ ee->ee_n_piers[mode]++;
+
+ if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1)
+ ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f;
+ break;
+ case AR5K_EEPROM_MODE_11G:
+ AR5K_EEPROM_READ(o++, val);
+
+ ee->ee_pwr_cal_g[0].freq =
+ ath5k_eeprom_bin2freq(ee, val & 0xff, mode);
+ if (ee->ee_pwr_cal_g[0].freq != AR5K_EEPROM_CHANNEL_DIS)
+ ee->ee_n_piers[mode]++;
+
+ ee->ee_pwr_cal_g[1].freq =
+ ath5k_eeprom_bin2freq(ee, (val >> 8) & 0xff, mode);
+ if (ee->ee_pwr_cal_g[1].freq != AR5K_EEPROM_CHANNEL_DIS)
+ ee->ee_n_piers[mode]++;
+
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_turbo_max_power[mode] = val & 0x7f;
+ ee->ee_xr_power[mode] = (val >> 7) & 0x3f;
+
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_pwr_cal_g[2].freq =
+ ath5k_eeprom_bin2freq(ee, val & 0xff, mode);
+ if (ee->ee_pwr_cal_g[2].freq != AR5K_EEPROM_CHANNEL_DIS)
+ ee->ee_n_piers[mode]++;
+
+ if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1)
+ ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f;
+
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_i_cal[mode] = (val >> 5) & 0x3f;
+ ee->ee_q_cal[mode] = val & 0x1f;
+
+ if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_2) {
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_cck_ofdm_gain_delta = val & 0xff;
+ }
+ break;
+ }
+
+ /*
+ * Read turbo mode information on newer EEPROM versions
+ */
+ if (ee->ee_version < AR5K_EEPROM_VERSION_5_0)
+ goto done;
+
+ switch (mode) {
+ case AR5K_EEPROM_MODE_11A:
+ ee->ee_switch_settling_turbo[mode] = (val >> 6) & 0x7f;
+
+ ee->ee_atn_tx_rx_turbo[mode] = (val >> 13) & 0x7;
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_atn_tx_rx_turbo[mode] |= (val & 0x7) << 3;
+ ee->ee_margin_tx_rx_turbo[mode] = (val >> 3) & 0x3f;
+
+ ee->ee_adc_desired_size_turbo[mode] = (val >> 9) & 0x7f;
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_adc_desired_size_turbo[mode] |= (val & 0x1) << 7;
+ ee->ee_pga_desired_size_turbo[mode] = (val >> 1) & 0xff;
+
+ if (AR5K_EEPROM_EEMAP(ee->ee_misc0) >= 2)
+ ee->ee_pd_gain_overlap = (val >> 9) & 0xf;
+ break;
+ case AR5K_EEPROM_MODE_11G:
+ ee->ee_switch_settling_turbo[mode] = (val >> 8) & 0x7f;
+
+ ee->ee_atn_tx_rx_turbo[mode] = (val >> 15) & 0x7;
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_atn_tx_rx_turbo[mode] |= (val & 0x1f) << 1;
+ ee->ee_margin_tx_rx_turbo[mode] = (val >> 5) & 0x3f;
+
+ ee->ee_adc_desired_size_turbo[mode] = (val >> 11) & 0x7f;
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_adc_desired_size_turbo[mode] |= (val & 0x7) << 5;
+ ee->ee_pga_desired_size_turbo[mode] = (val >> 3) & 0xff;
+ break;
+ }
+
+done:
+ /* return new offset */
+ *offset = o;
+
+ return 0;
+}
+
+/* Read mode-specific data (except power calibration data) */
+static int
+ath5k_eeprom_init_modes(struct ath5k_hw *ah)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ u32 mode_offset[3];
+ unsigned int mode;
+ u32 offset;
+ int ret;
+
+ /*
+ * Get values for all modes
+ */
+ mode_offset[AR5K_EEPROM_MODE_11A] = AR5K_EEPROM_MODES_11A(ah->ah_ee_version);
+ mode_offset[AR5K_EEPROM_MODE_11B] = AR5K_EEPROM_MODES_11B(ah->ah_ee_version);
+ mode_offset[AR5K_EEPROM_MODE_11G] = AR5K_EEPROM_MODES_11G(ah->ah_ee_version);
+
+ ee->ee_turbo_max_power[AR5K_EEPROM_MODE_11A] =
+ AR5K_EEPROM_HDR_T_5GHZ_DBM(ee->ee_header);
+
+ for (mode = AR5K_EEPROM_MODE_11A; mode <= AR5K_EEPROM_MODE_11G; mode++) {
+ offset = mode_offset[mode];
+
+ ret = ath5k_eeprom_read_ants(ah, &offset, mode);
+ if (ret)
+ return ret;
+
+ ret = ath5k_eeprom_read_modes(ah, &offset, mode);
+ if (ret)
+ return ret;
+ }
+
+ /* override for older eeprom versions for better performance */
+ if (ah->ah_ee_version <= AR5K_EEPROM_VERSION_3_2) {
+ ee->ee_thr_62[AR5K_EEPROM_MODE_11A] = 15;
+ ee->ee_thr_62[AR5K_EEPROM_MODE_11B] = 28;
+ ee->ee_thr_62[AR5K_EEPROM_MODE_11G] = 28;
+ }
+
+ return 0;
+}
+
+/* Read the frequency piers for each mode (mostly used on newer eeproms with 0xff
+ * frequency mask) */
+static inline int
+ath5k_eeprom_read_freq_list(struct ath5k_hw *ah, int *offset, int max,
+ struct ath5k_chan_pcal_info *pc, unsigned int mode)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ int o = *offset;
+ int i = 0;
+ u8 freq1, freq2;
+ u16 val;
+
+ ee->ee_n_piers[mode] = 0;
+ while (i < max) {
+ AR5K_EEPROM_READ(o++, val);
+
+ freq1 = val & 0xff;
+ if (!freq1)
+ break;
+
+ pc[i++].freq = ath5k_eeprom_bin2freq(ee,
+ freq1, mode);
+ ee->ee_n_piers[mode]++;
+
+ freq2 = (val >> 8) & 0xff;
+ if (!freq2 || i >= max)
+ break;
+
+ pc[i++].freq = ath5k_eeprom_bin2freq(ee,
+ freq2, mode);
+ ee->ee_n_piers[mode]++;
+ }
+
+ /* return new offset */
+ *offset = o;
+
+ return 0;
+}
+
+/* Read frequency piers for 802.11a */
+static int
+ath5k_eeprom_init_11a_pcal_freq(struct ath5k_hw *ah, int offset)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ struct ath5k_chan_pcal_info *pcal = ee->ee_pwr_cal_a;
+ int i;
+ u16 val;
+ u8 mask;
+
+ if (ee->ee_version >= AR5K_EEPROM_VERSION_3_3) {
+ ath5k_eeprom_read_freq_list(ah, &offset,
+ AR5K_EEPROM_N_5GHZ_CHAN, pcal,
+ AR5K_EEPROM_MODE_11A);
+ } else {
+ mask = AR5K_EEPROM_FREQ_M(ah->ah_ee_version);
+
+ AR5K_EEPROM_READ(offset++, val);
+ pcal[0].freq = (val >> 9) & mask;
+ pcal[1].freq = (val >> 2) & mask;
+ pcal[2].freq = (val << 5) & mask;
+
+ AR5K_EEPROM_READ(offset++, val);
+ pcal[2].freq |= (val >> 11) & 0x1f;
+ pcal[3].freq = (val >> 4) & mask;
+ pcal[4].freq = (val << 3) & mask;
+
+ AR5K_EEPROM_READ(offset++, val);
+ pcal[4].freq |= (val >> 13) & 0x7;
+ pcal[5].freq = (val >> 6) & mask;
+ pcal[6].freq = (val << 1) & mask;
+
+ AR5K_EEPROM_READ(offset++, val);
+ pcal[6].freq |= (val >> 15) & 0x1;
+ pcal[7].freq = (val >> 8) & mask;
+ pcal[8].freq = (val >> 1) & mask;
+ pcal[9].freq = (val << 6) & mask;
+
+ AR5K_EEPROM_READ(offset++, val);
+ pcal[9].freq |= (val >> 10) & 0x3f;
+
+ /* Fixed number of piers */
+ ee->ee_n_piers[AR5K_EEPROM_MODE_11A] = 10;
+
+ for (i = 0; i < AR5K_EEPROM_N_5GHZ_CHAN; i++) {
+ pcal[i].freq = ath5k_eeprom_bin2freq(ee,
+ pcal[i].freq, AR5K_EEPROM_MODE_11A);
+ }
+ }
+
+ return 0;
+}
+
+/* Read frequency piers for 802.11bg on eeprom versions >= 5 and eemap >= 2 */
+static inline int
+ath5k_eeprom_init_11bg_2413(struct ath5k_hw *ah, unsigned int mode, int offset)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ struct ath5k_chan_pcal_info *pcal;
+
+ switch (mode) {
+ case AR5K_EEPROM_MODE_11B:
+ pcal = ee->ee_pwr_cal_b;
+ break;
+ case AR5K_EEPROM_MODE_11G:
+ pcal = ee->ee_pwr_cal_g;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ ath5k_eeprom_read_freq_list(ah, &offset,
+ AR5K_EEPROM_N_2GHZ_CHAN_2413, pcal,
+ mode);
+
+ return 0;
+}
+
+
+/*
+ * Read power calibration for RF5111 chips
+ *
+ * For RF5111 we have an XPD -eXternal Power Detector- curve
+ * for each calibrated channel. Each curve has 0,5dB Power steps
+ * on x axis and PCDAC steps (offsets) on y axis and looks like an
+ * exponential function. To recreate the curve we read 11 points
+ * here and interpolate later.
+ */
+
+/* Used to match PCDAC steps with power values on RF5111 chips
+ * (eeprom versions < 4). For RF5111 we have 11 pre-defined PCDAC
+ * steps that match with the power values we read from eeprom. On
+ * older eeprom versions (< 3.2) these steps are equally spaced at
+ * 10% of the pcdac curve -until the curve reaches its maximum-
+ * (11 steps from 0 to 100%) but on newer eeprom versions (>= 3.2)
+ * these 11 steps are spaced in a different way. This function returns
+ * the pcdac steps based on eeprom version and curve min/max so that we
+ * can have pcdac/pwr points.
+ */
+static inline void
+ath5k_get_pcdac_intercepts(struct ath5k_hw *ah, u8 min, u8 max, u8 *vp)
+{
+ static const u16 intercepts3[] = {
+ 0, 5, 10, 20, 30, 50, 70, 85, 90, 95, 100
+ };
+ static const u16 intercepts3_2[] = {
+ 0, 10, 20, 30, 40, 50, 60, 70, 80, 90, 100
+ };
+ const u16 *ip;
+ int i;
+
+ if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_3_2)
+ ip = intercepts3_2;
+ else
+ ip = intercepts3;
+
+ for (i = 0; i < ARRAY_SIZE(intercepts3); i++)
+ vp[i] = (ip[i] * max + (100 - ip[i]) * min) / 100;
+}
+
+static int
+ath5k_eeprom_free_pcal_info(struct ath5k_hw *ah, int mode)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ struct ath5k_chan_pcal_info *chinfo;
+ u8 pier, pdg;
+
+ switch (mode) {
+ case AR5K_EEPROM_MODE_11A:
+ if (!AR5K_EEPROM_HDR_11A(ee->ee_header))
+ return 0;
+ chinfo = ee->ee_pwr_cal_a;
+ break;
+ case AR5K_EEPROM_MODE_11B:
+ if (!AR5K_EEPROM_HDR_11B(ee->ee_header))
+ return 0;
+ chinfo = ee->ee_pwr_cal_b;
+ break;
+ case AR5K_EEPROM_MODE_11G:
+ if (!AR5K_EEPROM_HDR_11G(ee->ee_header))
+ return 0;
+ chinfo = ee->ee_pwr_cal_g;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ for (pier = 0; pier < ee->ee_n_piers[mode]; pier++) {
+ if (!chinfo[pier].pd_curves)
+ continue;
+
+ for (pdg = 0; pdg < AR5K_EEPROM_N_PD_CURVES; pdg++) {
+ struct ath5k_pdgain_info *pd =
+ &chinfo[pier].pd_curves[pdg];
+
+ kfree(pd->pd_step);
+ kfree(pd->pd_pwr);
+ }
+
+ kfree(chinfo[pier].pd_curves);
+ }
+
+ return 0;
+}
+
+/* Convert RF5111 specific data to generic raw data
+ * used by interpolation code */
+static int
+ath5k_eeprom_convert_pcal_info_5111(struct ath5k_hw *ah, int mode,
+ struct ath5k_chan_pcal_info *chinfo)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ struct ath5k_chan_pcal_info_rf5111 *pcinfo;
+ struct ath5k_pdgain_info *pd;
+ u8 pier, point, idx;
+ u8 *pdgain_idx = ee->ee_pdc_to_idx[mode];
+
+ /* Fill raw data for each calibration pier */
+ for (pier = 0; pier < ee->ee_n_piers[mode]; pier++) {
+
+ pcinfo = &chinfo[pier].rf5111_info;
+
+ /* Allocate pd_curves for this cal pier */
+ chinfo[pier].pd_curves =
+ kcalloc(AR5K_EEPROM_N_PD_CURVES,
+ sizeof(struct ath5k_pdgain_info),
+ GFP_KERNEL);
+
+ if (!chinfo[pier].pd_curves)
+ goto err_out;
+
+ /* Only one curve for RF5111
+ * find out which one and place
+ * in pd_curves.
+ * Note: ee_x_gain is reversed here */
+ for (idx = 0; idx < AR5K_EEPROM_N_PD_CURVES; idx++) {
+
+ if (!((ee->ee_x_gain[mode] >> idx) & 0x1)) {
+ pdgain_idx[0] = idx;
+ break;
+ }
+ }
+
+ if (idx == AR5K_EEPROM_N_PD_CURVES)
+ goto err_out;
+
+ ee->ee_pd_gains[mode] = 1;
+
+ pd = &chinfo[pier].pd_curves[idx];
+
+ pd->pd_points = AR5K_EEPROM_N_PWR_POINTS_5111;
+
+ /* Allocate pd points for this curve */
+ pd->pd_step = kcalloc(AR5K_EEPROM_N_PWR_POINTS_5111,
+ sizeof(u8), GFP_KERNEL);
+ if (!pd->pd_step)
+ goto err_out;
+
+ pd->pd_pwr = kcalloc(AR5K_EEPROM_N_PWR_POINTS_5111,
+ sizeof(s16), GFP_KERNEL);
+ if (!pd->pd_pwr)
+ goto err_out;
+
+ /* Fill raw dataset
+ * (convert power to 0.25dB units
+ * for RF5112 compatibility) */
+ for (point = 0; point < pd->pd_points; point++) {
+
+ /* Absolute values */
+ pd->pd_pwr[point] = 2 * pcinfo->pwr[point];
+
+ /* Already sorted */
+ pd->pd_step[point] = pcinfo->pcdac[point];
+ }
+
+ /* Set min/max pwr */
+ chinfo[pier].min_pwr = pd->pd_pwr[0];
+ chinfo[pier].max_pwr = pd->pd_pwr[10];
+
+ }
+
+ return 0;
+
+err_out:
+ ath5k_eeprom_free_pcal_info(ah, mode);
+ return -ENOMEM;
+}
+
+/* Parse EEPROM data */
+static int
+ath5k_eeprom_read_pcal_info_5111(struct ath5k_hw *ah, int mode)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ struct ath5k_chan_pcal_info *pcal;
+ int offset, ret;
+ int i;
+ u16 val;
+
+ offset = AR5K_EEPROM_GROUPS_START(ee->ee_version);
+ switch (mode) {
+ case AR5K_EEPROM_MODE_11A:
+ if (!AR5K_EEPROM_HDR_11A(ee->ee_header))
+ return 0;
+
+ ret = ath5k_eeprom_init_11a_pcal_freq(ah,
+ offset + AR5K_EEPROM_GROUP1_OFFSET);
+ if (ret < 0)
+ return ret;
+
+ offset += AR5K_EEPROM_GROUP2_OFFSET;
+ pcal = ee->ee_pwr_cal_a;
+ break;
+ case AR5K_EEPROM_MODE_11B:
+ if (!AR5K_EEPROM_HDR_11B(ee->ee_header) &&
+ !AR5K_EEPROM_HDR_11G(ee->ee_header))
+ return 0;
+
+ pcal = ee->ee_pwr_cal_b;
+ offset += AR5K_EEPROM_GROUP3_OFFSET;
+
+ /* fixed piers */
+ pcal[0].freq = 2412;
+ pcal[1].freq = 2447;
+ pcal[2].freq = 2484;
+ ee->ee_n_piers[mode] = 3;
+ break;
+ case AR5K_EEPROM_MODE_11G:
+ if (!AR5K_EEPROM_HDR_11G(ee->ee_header))
+ return 0;
+
+ pcal = ee->ee_pwr_cal_g;
+ offset += AR5K_EEPROM_GROUP4_OFFSET;
+
+ /* fixed piers */
+ pcal[0].freq = 2312;
+ pcal[1].freq = 2412;
+ pcal[2].freq = 2484;
+ ee->ee_n_piers[mode] = 3;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ for (i = 0; i < ee->ee_n_piers[mode]; i++) {
+ struct ath5k_chan_pcal_info_rf5111 *cdata =
+ &pcal[i].rf5111_info;
+
+ AR5K_EEPROM_READ(offset++, val);
+ cdata->pcdac_max = ((val >> 10) & AR5K_EEPROM_PCDAC_M);
+ cdata->pcdac_min = ((val >> 4) & AR5K_EEPROM_PCDAC_M);
+ cdata->pwr[0] = ((val << 2) & AR5K_EEPROM_POWER_M);
+
+ AR5K_EEPROM_READ(offset++, val);
+ cdata->pwr[0] |= ((val >> 14) & 0x3);
+ cdata->pwr[1] = ((val >> 8) & AR5K_EEPROM_POWER_M);
+ cdata->pwr[2] = ((val >> 2) & AR5K_EEPROM_POWER_M);
+ cdata->pwr[3] = ((val << 4) & AR5K_EEPROM_POWER_M);
+
+ AR5K_EEPROM_READ(offset++, val);
+ cdata->pwr[3] |= ((val >> 12) & 0xf);
+ cdata->pwr[4] = ((val >> 6) & AR5K_EEPROM_POWER_M);
+ cdata->pwr[5] = (val & AR5K_EEPROM_POWER_M);
+
+ AR5K_EEPROM_READ(offset++, val);
+ cdata->pwr[6] = ((val >> 10) & AR5K_EEPROM_POWER_M);
+ cdata->pwr[7] = ((val >> 4) & AR5K_EEPROM_POWER_M);
+ cdata->pwr[8] = ((val << 2) & AR5K_EEPROM_POWER_M);
+
+ AR5K_EEPROM_READ(offset++, val);
+ cdata->pwr[8] |= ((val >> 14) & 0x3);
+ cdata->pwr[9] = ((val >> 8) & AR5K_EEPROM_POWER_M);
+ cdata->pwr[10] = ((val >> 2) & AR5K_EEPROM_POWER_M);
+
+ ath5k_get_pcdac_intercepts(ah, cdata->pcdac_min,
+ cdata->pcdac_max, cdata->pcdac);
+ }
+
+ return ath5k_eeprom_convert_pcal_info_5111(ah, mode, pcal);
+}
+
+
+/*
+ * Read power calibration for RF5112 chips
+ *
+ * For RF5112 we have 4 XPD -eXternal Power Detector- curves
+ * for each calibrated channel on 0, -6, -12 and -18dBm but we only
+ * use the higher (3) and the lower (0) curves. Each curve has 0.5dB
+ * power steps on x axis and PCDAC steps on y axis and looks like a
+ * linear function. To recreate the curve and pass the power values
+ * on hw, we read 4 points for xpd 0 (lower gain -> max power)
+ * and 3 points for xpd 3 (higher gain -> lower power) here and
+ * interpolate later.
+ *
+ * Note: Many vendors just use xpd 0 so xpd 3 is zeroed.
+ */
+
+/* Convert RF5112 specific data to generic raw data
+ * used by interpolation code */
+static int
+ath5k_eeprom_convert_pcal_info_5112(struct ath5k_hw *ah, int mode,
+ struct ath5k_chan_pcal_info *chinfo)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ struct ath5k_chan_pcal_info_rf5112 *pcinfo;
+ u8 *pdgain_idx = ee->ee_pdc_to_idx[mode];
+ unsigned int pier, pdg, point;
+
+ /* Fill raw data for each calibration pier */
+ for (pier = 0; pier < ee->ee_n_piers[mode]; pier++) {
+
+ pcinfo = &chinfo[pier].rf5112_info;
+
+ /* Allocate pd_curves for this cal pier */
+ chinfo[pier].pd_curves =
+ kcalloc(AR5K_EEPROM_N_PD_CURVES,
+ sizeof(struct ath5k_pdgain_info),
+ GFP_KERNEL);
+
+ if (!chinfo[pier].pd_curves)
+ goto err_out;
+
+ /* Fill pd_curves */
+ for (pdg = 0; pdg < ee->ee_pd_gains[mode]; pdg++) {
+
+ u8 idx = pdgain_idx[pdg];
+ struct ath5k_pdgain_info *pd =
+ &chinfo[pier].pd_curves[idx];
+
+ /* Lowest gain curve (max power) */
+ if (pdg == 0) {
+ /* One more point for better accuracy */
+ pd->pd_points = AR5K_EEPROM_N_XPD0_POINTS;
+
+ /* Allocate pd points for this curve */
+ pd->pd_step = kcalloc(pd->pd_points,
+ sizeof(u8), GFP_KERNEL);
+
+ if (!pd->pd_step)
+ goto err_out;
+
+ pd->pd_pwr = kcalloc(pd->pd_points,
+ sizeof(s16), GFP_KERNEL);
+
+ if (!pd->pd_pwr)
+ goto err_out;
+
+ /* Fill raw dataset
+ * (all power levels are in 0.25dB units) */
+ pd->pd_step[0] = pcinfo->pcdac_x0[0];
+ pd->pd_pwr[0] = pcinfo->pwr_x0[0];
+
+ for (point = 1; point < pd->pd_points;
+ point++) {
+ /* Absolute values */
+ pd->pd_pwr[point] =
+ pcinfo->pwr_x0[point];
+
+ /* Deltas */
+ pd->pd_step[point] =
+ pd->pd_step[point - 1] +
+ pcinfo->pcdac_x0[point];
+ }
+
+ /* Set min power for this frequency */
+ chinfo[pier].min_pwr = pd->pd_pwr[0];
+
+ /* Highest gain curve (min power) */
+ } else if (pdg == 1) {
+
+ pd->pd_points = AR5K_EEPROM_N_XPD3_POINTS;
+
+ /* Allocate pd points for this curve */
+ pd->pd_step = kcalloc(pd->pd_points,
+ sizeof(u8), GFP_KERNEL);
+
+ if (!pd->pd_step)
+ goto err_out;
+
+ pd->pd_pwr = kcalloc(pd->pd_points,
+ sizeof(s16), GFP_KERNEL);
+
+ if (!pd->pd_pwr)
+ goto err_out;
+
+ /* Fill raw dataset
+ * (all power levels are in 0.25dB units) */
+ for (point = 0; point < pd->pd_points;
+ point++) {
+ /* Absolute values */
+ pd->pd_pwr[point] =
+ pcinfo->pwr_x3[point];
+
+ /* Fixed points */
+ pd->pd_step[point] =
+ pcinfo->pcdac_x3[point];
+ }
+
+ /* Since we have a higher gain curve
+ * override min power */
+ chinfo[pier].min_pwr = pd->pd_pwr[0];
+ }
+ }
+ }
+
+ return 0;
+
+err_out:
+ ath5k_eeprom_free_pcal_info(ah, mode);
+ return -ENOMEM;
+}
+
+/* Parse EEPROM data */
+static int
+ath5k_eeprom_read_pcal_info_5112(struct ath5k_hw *ah, int mode)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ struct ath5k_chan_pcal_info_rf5112 *chan_pcal_info;
+ struct ath5k_chan_pcal_info *gen_chan_info;
+ u8 *pdgain_idx = ee->ee_pdc_to_idx[mode];
+ u32 offset;
+ u8 i, c;
+ u16 val;
+ u8 pd_gains = 0;
+
+ /* Count how many curves we have and
+ * identify them (which one of the 4
+ * available curves we have on each count).
+ * Curves are stored from lower (x0) to
+ * higher (x3) gain */
+ for (i = 0; i < AR5K_EEPROM_N_PD_CURVES; i++) {
+ /* ee_x_gain[mode] is x gain mask */
+ if ((ee->ee_x_gain[mode] >> i) & 0x1)
+ pdgain_idx[pd_gains++] = i;
+ }
+ ee->ee_pd_gains[mode] = pd_gains;
+
+ if (pd_gains == 0 || pd_gains > 2)
+ return -EINVAL;
+
+ switch (mode) {
+ case AR5K_EEPROM_MODE_11A:
+ /*
+ * Read 5GHz EEPROM channels
+ */
+ offset = AR5K_EEPROM_GROUPS_START(ee->ee_version);
+ ath5k_eeprom_init_11a_pcal_freq(ah, offset);
+
+ offset += AR5K_EEPROM_GROUP2_OFFSET;
+ gen_chan_info = ee->ee_pwr_cal_a;
+ break;
+ case AR5K_EEPROM_MODE_11B:
+ offset = AR5K_EEPROM_GROUPS_START(ee->ee_version);
+ if (AR5K_EEPROM_HDR_11A(ee->ee_header))
+ offset += AR5K_EEPROM_GROUP3_OFFSET;
+
+ /* NB: frequency piers parsed during mode init */
+ gen_chan_info = ee->ee_pwr_cal_b;
+ break;
+ case AR5K_EEPROM_MODE_11G:
+ offset = AR5K_EEPROM_GROUPS_START(ee->ee_version);
+ if (AR5K_EEPROM_HDR_11A(ee->ee_header))
+ offset += AR5K_EEPROM_GROUP4_OFFSET;
+ else if (AR5K_EEPROM_HDR_11B(ee->ee_header))
+ offset += AR5K_EEPROM_GROUP2_OFFSET;
+
+ /* NB: frequency piers parsed during mode init */
+ gen_chan_info = ee->ee_pwr_cal_g;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ for (i = 0; i < ee->ee_n_piers[mode]; i++) {
+ chan_pcal_info = &gen_chan_info[i].rf5112_info;
+
+ /* Power values in quarter dB
+ * for the lower xpd gain curve
+ * (0 dBm -> higher output power) */
+ for (c = 0; c < AR5K_EEPROM_N_XPD0_POINTS; c++) {
+ AR5K_EEPROM_READ(offset++, val);
+ chan_pcal_info->pwr_x0[c] = (s8) (val & 0xff);
+ chan_pcal_info->pwr_x0[++c] = (s8) ((val >> 8) & 0xff);
+ }
+
+ /* PCDAC steps
+ * corresponding to the above power
+ * measurements */
+ AR5K_EEPROM_READ(offset++, val);
+ chan_pcal_info->pcdac_x0[1] = (val & 0x1f);
+ chan_pcal_info->pcdac_x0[2] = ((val >> 5) & 0x1f);
+ chan_pcal_info->pcdac_x0[3] = ((val >> 10) & 0x1f);
+
+ /* Power values in quarter dB
+ * for the higher xpd gain curve
+ * (18 dBm -> lower output power) */
+ AR5K_EEPROM_READ(offset++, val);
+ chan_pcal_info->pwr_x3[0] = (s8) (val & 0xff);
+ chan_pcal_info->pwr_x3[1] = (s8) ((val >> 8) & 0xff);
+
+ AR5K_EEPROM_READ(offset++, val);
+ chan_pcal_info->pwr_x3[2] = (val & 0xff);
+
+ /* PCDAC steps
+ * corresponding to the above power
+ * measurements (fixed) */
+ chan_pcal_info->pcdac_x3[0] = 20;
+ chan_pcal_info->pcdac_x3[1] = 35;
+ chan_pcal_info->pcdac_x3[2] = 63;
+
+ if (ee->ee_version >= AR5K_EEPROM_VERSION_4_3) {
+ chan_pcal_info->pcdac_x0[0] = ((val >> 8) & 0x3f);
+
+ /* Last xpd0 power level is also channel maximum */
+ gen_chan_info[i].max_pwr = chan_pcal_info->pwr_x0[3];
+ } else {
+ chan_pcal_info->pcdac_x0[0] = 1;
+ gen_chan_info[i].max_pwr = (s8) ((val >> 8) & 0xff);
+ }
+
+ }
+
+ return ath5k_eeprom_convert_pcal_info_5112(ah, mode, gen_chan_info);
+}
+
+
+/*
+ * Read power calibration for RF2413 chips
+ *
+ * For RF2413 we have a Power to PDDAC table (Power Detector)
+ * instead of a PCDAC and 4 pd gain curves for each calibrated channel.
+ * Each curve has power on x axis in 0.5 db steps and PDDADC steps on y
+ * axis and looks like an exponential function like the RF5111 curve.
+ *
+ * To recreate the curves we read here the points and interpolate
+ * later. Note that in most cases only 2 (higher and lower) curves are
+ * used (like RF5112) but vendors have the opportunity to include all
+ * 4 curves on eeprom. The final curve (higher power) has an extra
+ * point for better accuracy like RF5112.
+ */
+
+/* For RF2413 power calibration data doesn't start on a fixed location and
+ * if a mode is not supported, its section is missing -not zeroed-.
+ * So we need to calculate the starting offset for each section by using
+ * these two functions */
+
+/* Return the size of each section based on the mode and the number of pd
+ * gains available (maximum 4). */
+static inline unsigned int
+ath5k_pdgains_size_2413(struct ath5k_eeprom_info *ee, unsigned int mode)
+{
+ static const unsigned int pdgains_size[] = { 4, 6, 9, 12 };
+ unsigned int sz;
+
+ sz = pdgains_size[ee->ee_pd_gains[mode] - 1];
+ sz *= ee->ee_n_piers[mode];
+
+ return sz;
+}
+
+/* Return the starting offset for a section based on the modes supported
+ * and each section's size. */
+static unsigned int
+ath5k_cal_data_offset_2413(struct ath5k_eeprom_info *ee, int mode)
+{
+ u32 offset = AR5K_EEPROM_CAL_DATA_START(ee->ee_misc4);
+
+ switch (mode) {
+ case AR5K_EEPROM_MODE_11G:
+ if (AR5K_EEPROM_HDR_11B(ee->ee_header))
+ offset += ath5k_pdgains_size_2413(ee,
+ AR5K_EEPROM_MODE_11B) +
+ AR5K_EEPROM_N_2GHZ_CHAN_2413 / 2;
+ fallthrough;
+ case AR5K_EEPROM_MODE_11B:
+ if (AR5K_EEPROM_HDR_11A(ee->ee_header))
+ offset += ath5k_pdgains_size_2413(ee,
+ AR5K_EEPROM_MODE_11A) +
+ AR5K_EEPROM_N_5GHZ_CHAN / 2;
+ fallthrough;
+ case AR5K_EEPROM_MODE_11A:
+ break;
+ default:
+ break;
+ }
+
+ return offset;
+}
+
+/* Convert RF2413 specific data to generic raw data
+ * used by interpolation code */
+static int
+ath5k_eeprom_convert_pcal_info_2413(struct ath5k_hw *ah, int mode,
+ struct ath5k_chan_pcal_info *chinfo)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ struct ath5k_chan_pcal_info_rf2413 *pcinfo;
+ u8 *pdgain_idx = ee->ee_pdc_to_idx[mode];
+ unsigned int pier, pdg, point;
+
+ /* Fill raw data for each calibration pier */
+ for (pier = 0; pier < ee->ee_n_piers[mode]; pier++) {
+
+ pcinfo = &chinfo[pier].rf2413_info;
+
+ /* Allocate pd_curves for this cal pier */
+ chinfo[pier].pd_curves =
+ kcalloc(AR5K_EEPROM_N_PD_CURVES,
+ sizeof(struct ath5k_pdgain_info),
+ GFP_KERNEL);
+
+ if (!chinfo[pier].pd_curves)
+ goto err_out;
+
+ /* Fill pd_curves */
+ for (pdg = 0; pdg < ee->ee_pd_gains[mode]; pdg++) {
+
+ u8 idx = pdgain_idx[pdg];
+ struct ath5k_pdgain_info *pd =
+ &chinfo[pier].pd_curves[idx];
+
+ /* One more point for the highest power
+ * curve (lowest gain) */
+ if (pdg == ee->ee_pd_gains[mode] - 1)
+ pd->pd_points = AR5K_EEPROM_N_PD_POINTS;
+ else
+ pd->pd_points = AR5K_EEPROM_N_PD_POINTS - 1;
+
+ /* Allocate pd points for this curve */
+ pd->pd_step = kcalloc(pd->pd_points,
+ sizeof(u8), GFP_KERNEL);
+
+ if (!pd->pd_step)
+ goto err_out;
+
+ pd->pd_pwr = kcalloc(pd->pd_points,
+ sizeof(s16), GFP_KERNEL);
+
+ if (!pd->pd_pwr)
+ goto err_out;
+
+ /* Fill raw dataset
+ * convert all pwr levels to
+ * quarter dB for RF5112 compatibility */
+ pd->pd_step[0] = pcinfo->pddac_i[pdg];
+ pd->pd_pwr[0] = 4 * pcinfo->pwr_i[pdg];
+
+ for (point = 1; point < pd->pd_points; point++) {
+
+ pd->pd_pwr[point] = pd->pd_pwr[point - 1] +
+ 2 * pcinfo->pwr[pdg][point - 1];
+
+ pd->pd_step[point] = pd->pd_step[point - 1] +
+ pcinfo->pddac[pdg][point - 1];
+
+ }
+
+ /* Highest gain curve -> min power */
+ if (pdg == 0)
+ chinfo[pier].min_pwr = pd->pd_pwr[0];
+
+ /* Lowest gain curve -> max power */
+ if (pdg == ee->ee_pd_gains[mode] - 1)
+ chinfo[pier].max_pwr =
+ pd->pd_pwr[pd->pd_points - 1];
+ }
+ }
+
+ return 0;
+
+err_out:
+ ath5k_eeprom_free_pcal_info(ah, mode);
+ return -ENOMEM;
+}
+
+/* Parse EEPROM data */
+static int
+ath5k_eeprom_read_pcal_info_2413(struct ath5k_hw *ah, int mode)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ struct ath5k_chan_pcal_info_rf2413 *pcinfo;
+ struct ath5k_chan_pcal_info *chinfo;
+ u8 *pdgain_idx = ee->ee_pdc_to_idx[mode];
+ u32 offset;
+ int idx, i;
+ u16 val;
+ u8 pd_gains = 0;
+
+ /* Count how many curves we have and
+ * identify them (which one of the 4
+ * available curves we have on each count).
+ * Curves are stored from higher to
+ * lower gain so we go backwards */
+ for (idx = AR5K_EEPROM_N_PD_CURVES - 1; idx >= 0; idx--) {
+ /* ee_x_gain[mode] is x gain mask */
+ if ((ee->ee_x_gain[mode] >> idx) & 0x1)
+ pdgain_idx[pd_gains++] = idx;
+
+ }
+ ee->ee_pd_gains[mode] = pd_gains;
+
+ if (pd_gains == 0)
+ return -EINVAL;
+
+ offset = ath5k_cal_data_offset_2413(ee, mode);
+ switch (mode) {
+ case AR5K_EEPROM_MODE_11A:
+ if (!AR5K_EEPROM_HDR_11A(ee->ee_header))
+ return 0;
+
+ ath5k_eeprom_init_11a_pcal_freq(ah, offset);
+ offset += AR5K_EEPROM_N_5GHZ_CHAN / 2;
+ chinfo = ee->ee_pwr_cal_a;
+ break;
+ case AR5K_EEPROM_MODE_11B:
+ if (!AR5K_EEPROM_HDR_11B(ee->ee_header))
+ return 0;
+
+ ath5k_eeprom_init_11bg_2413(ah, mode, offset);
+ offset += AR5K_EEPROM_N_2GHZ_CHAN_2413 / 2;
+ chinfo = ee->ee_pwr_cal_b;
+ break;
+ case AR5K_EEPROM_MODE_11G:
+ if (!AR5K_EEPROM_HDR_11G(ee->ee_header))
+ return 0;
+
+ ath5k_eeprom_init_11bg_2413(ah, mode, offset);
+ offset += AR5K_EEPROM_N_2GHZ_CHAN_2413 / 2;
+ chinfo = ee->ee_pwr_cal_g;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ for (i = 0; i < ee->ee_n_piers[mode]; i++) {
+ pcinfo = &chinfo[i].rf2413_info;
+
+ /*
+ * Read pwr_i, pddac_i and the first
+ * 2 pd points (pwr, pddac)
+ */
+ AR5K_EEPROM_READ(offset++, val);
+ pcinfo->pwr_i[0] = val & 0x1f;
+ pcinfo->pddac_i[0] = (val >> 5) & 0x7f;
+ pcinfo->pwr[0][0] = (val >> 12) & 0xf;
+
+ AR5K_EEPROM_READ(offset++, val);
+ pcinfo->pddac[0][0] = val & 0x3f;
+ pcinfo->pwr[0][1] = (val >> 6) & 0xf;
+ pcinfo->pddac[0][1] = (val >> 10) & 0x3f;
+
+ AR5K_EEPROM_READ(offset++, val);
+ pcinfo->pwr[0][2] = val & 0xf;
+ pcinfo->pddac[0][2] = (val >> 4) & 0x3f;
+
+ pcinfo->pwr[0][3] = 0;
+ pcinfo->pddac[0][3] = 0;
+
+ if (pd_gains > 1) {
+ /*
+ * Pd gain 0 is not the last pd gain
+ * so it only has 2 pd points.
+ * Continue with pd gain 1.
+ */
+ pcinfo->pwr_i[1] = (val >> 10) & 0x1f;
+
+ pcinfo->pddac_i[1] = (val >> 15) & 0x1;
+ AR5K_EEPROM_READ(offset++, val);
+ pcinfo->pddac_i[1] |= (val & 0x3F) << 1;
+
+ pcinfo->pwr[1][0] = (val >> 6) & 0xf;
+ pcinfo->pddac[1][0] = (val >> 10) & 0x3f;
+
+ AR5K_EEPROM_READ(offset++, val);
+ pcinfo->pwr[1][1] = val & 0xf;
+ pcinfo->pddac[1][1] = (val >> 4) & 0x3f;
+ pcinfo->pwr[1][2] = (val >> 10) & 0xf;
+
+ pcinfo->pddac[1][2] = (val >> 14) & 0x3;
+ AR5K_EEPROM_READ(offset++, val);
+ pcinfo->pddac[1][2] |= (val & 0xF) << 2;
+
+ pcinfo->pwr[1][3] = 0;
+ pcinfo->pddac[1][3] = 0;
+ } else if (pd_gains == 1) {
+ /*
+ * Pd gain 0 is the last one so
+ * read the extra point.
+ */
+ pcinfo->pwr[0][3] = (val >> 10) & 0xf;
+
+ pcinfo->pddac[0][3] = (val >> 14) & 0x3;
+ AR5K_EEPROM_READ(offset++, val);
+ pcinfo->pddac[0][3] |= (val & 0xF) << 2;
+ }
+
+ /*
+ * Proceed with the other pd_gains
+ * as above.
+ */
+ if (pd_gains > 2) {
+ pcinfo->pwr_i[2] = (val >> 4) & 0x1f;
+ pcinfo->pddac_i[2] = (val >> 9) & 0x7f;
+
+ AR5K_EEPROM_READ(offset++, val);
+ pcinfo->pwr[2][0] = (val >> 0) & 0xf;
+ pcinfo->pddac[2][0] = (val >> 4) & 0x3f;
+ pcinfo->pwr[2][1] = (val >> 10) & 0xf;
+
+ pcinfo->pddac[2][1] = (val >> 14) & 0x3;
+ AR5K_EEPROM_READ(offset++, val);
+ pcinfo->pddac[2][1] |= (val & 0xF) << 2;
+
+ pcinfo->pwr[2][2] = (val >> 4) & 0xf;
+ pcinfo->pddac[2][2] = (val >> 8) & 0x3f;
+
+ pcinfo->pwr[2][3] = 0;
+ pcinfo->pddac[2][3] = 0;
+ } else if (pd_gains == 2) {
+ pcinfo->pwr[1][3] = (val >> 4) & 0xf;
+ pcinfo->pddac[1][3] = (val >> 8) & 0x3f;
+ }
+
+ if (pd_gains > 3) {
+ pcinfo->pwr_i[3] = (val >> 14) & 0x3;
+ AR5K_EEPROM_READ(offset++, val);
+ pcinfo->pwr_i[3] |= ((val >> 0) & 0x7) << 2;
+
+ pcinfo->pddac_i[3] = (val >> 3) & 0x7f;
+ pcinfo->pwr[3][0] = (val >> 10) & 0xf;
+ pcinfo->pddac[3][0] = (val >> 14) & 0x3;
+
+ AR5K_EEPROM_READ(offset++, val);
+ pcinfo->pddac[3][0] |= (val & 0xF) << 2;
+ pcinfo->pwr[3][1] = (val >> 4) & 0xf;
+ pcinfo->pddac[3][1] = (val >> 8) & 0x3f;
+
+ pcinfo->pwr[3][2] = (val >> 14) & 0x3;
+ AR5K_EEPROM_READ(offset++, val);
+ pcinfo->pwr[3][2] |= ((val >> 0) & 0x3) << 2;
+
+ pcinfo->pddac[3][2] = (val >> 2) & 0x3f;
+ pcinfo->pwr[3][3] = (val >> 8) & 0xf;
+
+ pcinfo->pddac[3][3] = (val >> 12) & 0xF;
+ AR5K_EEPROM_READ(offset++, val);
+ pcinfo->pddac[3][3] |= ((val >> 0) & 0x3) << 4;
+ } else if (pd_gains == 3) {
+ pcinfo->pwr[2][3] = (val >> 14) & 0x3;
+ AR5K_EEPROM_READ(offset++, val);
+ pcinfo->pwr[2][3] |= ((val >> 0) & 0x3) << 2;
+
+ pcinfo->pddac[2][3] = (val >> 2) & 0x3f;
+ }
+ }
+
+ return ath5k_eeprom_convert_pcal_info_2413(ah, mode, chinfo);
+}
+
+
+/*
+ * Read per rate target power (this is the maximum tx power
+ * supported by the card). This info is used when setting
+ * tx power, no matter the channel.
+ *
+ * This also works for v5 EEPROMs.
+ */
+static int
+ath5k_eeprom_read_target_rate_pwr_info(struct ath5k_hw *ah, unsigned int mode)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ struct ath5k_rate_pcal_info *rate_pcal_info;
+ u8 *rate_target_pwr_num;
+ u32 offset;
+ u16 val;
+ int i;
+
+ offset = AR5K_EEPROM_TARGET_PWRSTART(ee->ee_misc1);
+ rate_target_pwr_num = &ee->ee_rate_target_pwr_num[mode];
+ switch (mode) {
+ case AR5K_EEPROM_MODE_11A:
+ offset += AR5K_EEPROM_TARGET_PWR_OFF_11A(ee->ee_version);
+ rate_pcal_info = ee->ee_rate_tpwr_a;
+ ee->ee_rate_target_pwr_num[mode] = AR5K_EEPROM_N_5GHZ_RATE_CHAN;
+ break;
+ case AR5K_EEPROM_MODE_11B:
+ offset += AR5K_EEPROM_TARGET_PWR_OFF_11B(ee->ee_version);
+ rate_pcal_info = ee->ee_rate_tpwr_b;
+ ee->ee_rate_target_pwr_num[mode] = 2; /* 3rd is g mode's 1st */
+ break;
+ case AR5K_EEPROM_MODE_11G:
+ offset += AR5K_EEPROM_TARGET_PWR_OFF_11G(ee->ee_version);
+ rate_pcal_info = ee->ee_rate_tpwr_g;
+ ee->ee_rate_target_pwr_num[mode] = AR5K_EEPROM_N_2GHZ_CHAN;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* Different freq mask for older eeproms (<= v3.2) */
+ if (ee->ee_version <= AR5K_EEPROM_VERSION_3_2) {
+ for (i = 0; i < (*rate_target_pwr_num); i++) {
+ AR5K_EEPROM_READ(offset++, val);
+ rate_pcal_info[i].freq =
+ ath5k_eeprom_bin2freq(ee, (val >> 9) & 0x7f, mode);
+
+ rate_pcal_info[i].target_power_6to24 = ((val >> 3) & 0x3f);
+ rate_pcal_info[i].target_power_36 = (val << 3) & 0x3f;
+
+ AR5K_EEPROM_READ(offset++, val);
+
+ if (rate_pcal_info[i].freq == AR5K_EEPROM_CHANNEL_DIS ||
+ val == 0) {
+ (*rate_target_pwr_num) = i;
+ break;
+ }
+
+ rate_pcal_info[i].target_power_36 |= ((val >> 13) & 0x7);
+ rate_pcal_info[i].target_power_48 = ((val >> 7) & 0x3f);
+ rate_pcal_info[i].target_power_54 = ((val >> 1) & 0x3f);
+ }
+ } else {
+ for (i = 0; i < (*rate_target_pwr_num); i++) {
+ AR5K_EEPROM_READ(offset++, val);
+ rate_pcal_info[i].freq =
+ ath5k_eeprom_bin2freq(ee, (val >> 8) & 0xff, mode);
+
+ rate_pcal_info[i].target_power_6to24 = ((val >> 2) & 0x3f);
+ rate_pcal_info[i].target_power_36 = (val << 4) & 0x3f;
+
+ AR5K_EEPROM_READ(offset++, val);
+
+ if (rate_pcal_info[i].freq == AR5K_EEPROM_CHANNEL_DIS ||
+ val == 0) {
+ (*rate_target_pwr_num) = i;
+ break;
+ }
+
+ rate_pcal_info[i].target_power_36 |= (val >> 12) & 0xf;
+ rate_pcal_info[i].target_power_48 = ((val >> 6) & 0x3f);
+ rate_pcal_info[i].target_power_54 = (val & 0x3f);
+ }
+ }
+
+ return 0;
+}
+
+
+/*
+ * Read per channel calibration info from EEPROM
+ *
+ * This info is used to calibrate the baseband power table. Imagine
+ * that for each channel there is a power curve that's hw specific
+ * (depends on amplifier etc) and we try to "correct" this curve using
+ * offsets we pass on to phy chip (baseband -> before amplifier) so that
+ * it can use accurate power values when setting tx power (takes amplifier's
+ * performance on each channel into account).
+ *
+ * EEPROM provides us with the offsets for some pre-calibrated channels
+ * and we have to interpolate to create the full table for these channels and
+ * also the table for any channel.
+ */
+static int
+ath5k_eeprom_read_pcal_info(struct ath5k_hw *ah)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ int (*read_pcal)(struct ath5k_hw *hw, int mode);
+ int mode;
+ int err;
+
+ if ((ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) &&
+ (AR5K_EEPROM_EEMAP(ee->ee_misc0) == 1))
+ read_pcal = ath5k_eeprom_read_pcal_info_5112;
+ else if ((ah->ah_ee_version >= AR5K_EEPROM_VERSION_5_0) &&
+ (AR5K_EEPROM_EEMAP(ee->ee_misc0) == 2))
+ read_pcal = ath5k_eeprom_read_pcal_info_2413;
+ else
+ read_pcal = ath5k_eeprom_read_pcal_info_5111;
+
+
+ for (mode = AR5K_EEPROM_MODE_11A; mode <= AR5K_EEPROM_MODE_11G;
+ mode++) {
+ err = read_pcal(ah, mode);
+ if (err)
+ return err;
+
+ err = ath5k_eeprom_read_target_rate_pwr_info(ah, mode);
+ if (err < 0)
+ return err;
+ }
+
+ return 0;
+}
+
+/* Read conformance test limits used for regulatory control */
+static int
+ath5k_eeprom_read_ctl_info(struct ath5k_hw *ah)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ struct ath5k_edge_power *rep;
+ unsigned int fmask, pmask;
+ unsigned int ctl_mode;
+ int i, j;
+ u32 offset;
+ u16 val;
+
+ pmask = AR5K_EEPROM_POWER_M;
+ fmask = AR5K_EEPROM_FREQ_M(ee->ee_version);
+ offset = AR5K_EEPROM_CTL(ee->ee_version);
+ ee->ee_ctls = AR5K_EEPROM_N_CTLS(ee->ee_version);
+ for (i = 0; i < ee->ee_ctls; i += 2) {
+ AR5K_EEPROM_READ(offset++, val);
+ ee->ee_ctl[i] = (val >> 8) & 0xff;
+ ee->ee_ctl[i + 1] = val & 0xff;
+ }
+
+ offset = AR5K_EEPROM_GROUP8_OFFSET;
+ if (ee->ee_version >= AR5K_EEPROM_VERSION_4_0)
+ offset += AR5K_EEPROM_TARGET_PWRSTART(ee->ee_misc1) -
+ AR5K_EEPROM_GROUP5_OFFSET;
+ else
+ offset += AR5K_EEPROM_GROUPS_START(ee->ee_version);
+
+ rep = ee->ee_ctl_pwr;
+ for (i = 0; i < ee->ee_ctls; i++) {
+ switch (ee->ee_ctl[i] & AR5K_CTL_MODE_M) {
+ case AR5K_CTL_11A:
+ case AR5K_CTL_TURBO:
+ ctl_mode = AR5K_EEPROM_MODE_11A;
+ break;
+ default:
+ ctl_mode = AR5K_EEPROM_MODE_11G;
+ break;
+ }
+ if (ee->ee_ctl[i] == 0) {
+ if (ee->ee_version >= AR5K_EEPROM_VERSION_3_3)
+ offset += 8;
+ else
+ offset += 7;
+ rep += AR5K_EEPROM_N_EDGES;
+ continue;
+ }
+ if (ee->ee_version >= AR5K_EEPROM_VERSION_3_3) {
+ for (j = 0; j < AR5K_EEPROM_N_EDGES; j += 2) {
+ AR5K_EEPROM_READ(offset++, val);
+ rep[j].freq = (val >> 8) & fmask;
+ rep[j + 1].freq = val & fmask;
+ }
+ for (j = 0; j < AR5K_EEPROM_N_EDGES; j += 2) {
+ AR5K_EEPROM_READ(offset++, val);
+ rep[j].edge = (val >> 8) & pmask;
+ rep[j].flag = (val >> 14) & 1;
+ rep[j + 1].edge = val & pmask;
+ rep[j + 1].flag = (val >> 6) & 1;
+ }
+ } else {
+ AR5K_EEPROM_READ(offset++, val);
+ rep[0].freq = (val >> 9) & fmask;
+ rep[1].freq = (val >> 2) & fmask;
+ rep[2].freq = (val << 5) & fmask;
+
+ AR5K_EEPROM_READ(offset++, val);
+ rep[2].freq |= (val >> 11) & 0x1f;
+ rep[3].freq = (val >> 4) & fmask;
+ rep[4].freq = (val << 3) & fmask;
+
+ AR5K_EEPROM_READ(offset++, val);
+ rep[4].freq |= (val >> 13) & 0x7;
+ rep[5].freq = (val >> 6) & fmask;
+ rep[6].freq = (val << 1) & fmask;
+
+ AR5K_EEPROM_READ(offset++, val);
+ rep[6].freq |= (val >> 15) & 0x1;
+ rep[7].freq = (val >> 8) & fmask;
+
+ rep[0].edge = (val >> 2) & pmask;
+ rep[1].edge = (val << 4) & pmask;
+
+ AR5K_EEPROM_READ(offset++, val);
+ rep[1].edge |= (val >> 12) & 0xf;
+ rep[2].edge = (val >> 6) & pmask;
+ rep[3].edge = val & pmask;
+
+ AR5K_EEPROM_READ(offset++, val);
+ rep[4].edge = (val >> 10) & pmask;
+ rep[5].edge = (val >> 4) & pmask;
+ rep[6].edge = (val << 2) & pmask;
+
+ AR5K_EEPROM_READ(offset++, val);
+ rep[6].edge |= (val >> 14) & 0x3;
+ rep[7].edge = (val >> 8) & pmask;
+ }
+ for (j = 0; j < AR5K_EEPROM_N_EDGES; j++) {
+ rep[j].freq = ath5k_eeprom_bin2freq(ee,
+ rep[j].freq, ctl_mode);
+ }
+ rep += AR5K_EEPROM_N_EDGES;
+ }
+
+ return 0;
+}
+
+static int
+ath5k_eeprom_read_spur_chans(struct ath5k_hw *ah)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ u32 offset;
+ u16 val;
+ int i;
+
+ offset = AR5K_EEPROM_CTL(ee->ee_version) +
+ AR5K_EEPROM_N_CTLS(ee->ee_version);
+
+ if (ee->ee_version < AR5K_EEPROM_VERSION_5_3) {
+ /* No spur info for 5GHz */
+ ee->ee_spur_chans[0][0] = AR5K_EEPROM_NO_SPUR;
+ /* 2 channels for 2GHz (2464/2420) */
+ ee->ee_spur_chans[0][1] = AR5K_EEPROM_5413_SPUR_CHAN_1;
+ ee->ee_spur_chans[1][1] = AR5K_EEPROM_5413_SPUR_CHAN_2;
+ ee->ee_spur_chans[2][1] = AR5K_EEPROM_NO_SPUR;
+ } else if (ee->ee_version >= AR5K_EEPROM_VERSION_5_3) {
+ for (i = 0; i < AR5K_EEPROM_N_SPUR_CHANS; i++) {
+ AR5K_EEPROM_READ(offset, val);
+ ee->ee_spur_chans[i][0] = val;
+ AR5K_EEPROM_READ(offset + AR5K_EEPROM_N_SPUR_CHANS,
+ val);
+ ee->ee_spur_chans[i][1] = val;
+ offset++;
+ }
+ }
+
+ return 0;
+}
+
+
+/***********************\
+* Init/Detach functions *
+\***********************/
+
+/*
+ * Initialize eeprom data structure
+ */
+int
+ath5k_eeprom_init(struct ath5k_hw *ah)
+{
+ int err;
+
+ err = ath5k_eeprom_init_header(ah);
+ if (err < 0)
+ return err;
+
+ err = ath5k_eeprom_init_modes(ah);
+ if (err < 0)
+ return err;
+
+ err = ath5k_eeprom_read_pcal_info(ah);
+ if (err < 0)
+ return err;
+
+ err = ath5k_eeprom_read_ctl_info(ah);
+ if (err < 0)
+ return err;
+
+ err = ath5k_eeprom_read_spur_chans(ah);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+void
+ath5k_eeprom_detach(struct ath5k_hw *ah)
+{
+ u8 mode;
+
+ for (mode = AR5K_EEPROM_MODE_11A; mode <= AR5K_EEPROM_MODE_11G; mode++)
+ ath5k_eeprom_free_pcal_info(ah, mode);
+}
+
+int
+ath5k_eeprom_mode_from_channel(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel)
+{
+ switch (channel->hw_value) {
+ case AR5K_MODE_11A:
+ return AR5K_EEPROM_MODE_11A;
+ case AR5K_MODE_11G:
+ return AR5K_EEPROM_MODE_11G;
+ case AR5K_MODE_11B:
+ return AR5K_EEPROM_MODE_11B;
+ default:
+ ATH5K_WARN(ah, "channel is not A/B/G!");
+ return AR5K_EEPROM_MODE_11A;
+ }
+}
diff --git a/drivers/net/wireless/ath/ath5k/eeprom.h b/drivers/net/wireless/ath/ath5k/eeprom.h
new file mode 100644
index 000000000..693296ee9
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/eeprom.h
@@ -0,0 +1,495 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/*
+ * Common ar5xxx EEPROM data offsets (set these on AR5K_EEPROM_BASE)
+ */
+#define AR5K_EEPROM_PCIE_OFFSET 0x02 /* Contains offset to PCI-E infos */
+#define AR5K_EEPROM_PCIE_SERDES_SECTION 0x40 /* PCIE_OFFSET points here when
+ * SERDES infos are present */
+#define AR5K_EEPROM_MAGIC 0x003d /* EEPROM Magic number */
+#define AR5K_EEPROM_MAGIC_VALUE 0x5aa5 /* Default - found on EEPROM */
+
+#define AR5K_EEPROM_IS_HB63 0x000b /* Talon detect */
+
+#define AR5K_EEPROM_RFKILL 0x0f
+#define AR5K_EEPROM_RFKILL_GPIO_SEL 0x0000001c
+#define AR5K_EEPROM_RFKILL_GPIO_SEL_S 2
+#define AR5K_EEPROM_RFKILL_POLARITY 0x00000002
+#define AR5K_EEPROM_RFKILL_POLARITY_S 1
+
+#define AR5K_EEPROM_REG_DOMAIN 0x00bf /* EEPROM regdom */
+
+/* FLASH(EEPROM) Defines for AR531X chips */
+#define AR5K_EEPROM_SIZE_LOWER 0x1b /* size info -- lower */
+#define AR5K_EEPROM_SIZE_UPPER 0x1c /* size info -- upper */
+#define AR5K_EEPROM_SIZE_UPPER_MASK 0xfff0
+#define AR5K_EEPROM_SIZE_UPPER_SHIFT 4
+#define AR5K_EEPROM_SIZE_ENDLOC_SHIFT 12
+
+#define AR5K_EEPROM_CHECKSUM 0x00c0 /* EEPROM checksum */
+#define AR5K_EEPROM_INFO_BASE 0x00c0 /* EEPROM header */
+#define AR5K_EEPROM_INFO_MAX (0x400 - AR5K_EEPROM_INFO_BASE)
+#define AR5K_EEPROM_INFO_CKSUM 0xffff
+#define AR5K_EEPROM_INFO(_n) (AR5K_EEPROM_INFO_BASE + (_n))
+
+#define AR5K_EEPROM_VERSION AR5K_EEPROM_INFO(1) /* EEPROM Version */
+#define AR5K_EEPROM_VERSION_3_0 0x3000 /* No idea what's going on before this version */
+#define AR5K_EEPROM_VERSION_3_1 0x3001 /* ob/db values for 2GHz (ar5211_rfregs) */
+#define AR5K_EEPROM_VERSION_3_2 0x3002 /* different frequency representation (eeprom_bin2freq) */
+#define AR5K_EEPROM_VERSION_3_3 0x3003 /* offsets changed, has 32 CTLs (see below) and ee_false_detect (eeprom_read_modes) */
+#define AR5K_EEPROM_VERSION_3_4 0x3004 /* has ee_i_gain, ee_cck_ofdm_power_delta (eeprom_read_modes) */
+#define AR5K_EEPROM_VERSION_4_0 0x4000 /* has ee_misc, ee_cal_pier, ee_turbo_max_power and ee_xr_power (eeprom_init) */
+#define AR5K_EEPROM_VERSION_4_1 0x4001 /* has ee_margin_tx_rx (eeprom_init) */
+#define AR5K_EEPROM_VERSION_4_2 0x4002 /* has ee_cck_ofdm_gain_delta (eeprom_init) */
+#define AR5K_EEPROM_VERSION_4_3 0x4003 /* power calibration changes */
+#define AR5K_EEPROM_VERSION_4_4 0x4004
+#define AR5K_EEPROM_VERSION_4_5 0x4005
+#define AR5K_EEPROM_VERSION_4_6 0x4006 /* has ee_scaled_cck_delta */
+#define AR5K_EEPROM_VERSION_4_7 0x3007 /* 4007 ? */
+#define AR5K_EEPROM_VERSION_4_9 0x4009 /* EAR futureproofing */
+#define AR5K_EEPROM_VERSION_5_0 0x5000 /* Has 2413 PDADC calibration etc */
+#define AR5K_EEPROM_VERSION_5_1 0x5001 /* Has capability values */
+#define AR5K_EEPROM_VERSION_5_3 0x5003 /* Has spur mitigation tables */
+
+#define AR5K_EEPROM_MODE_11A 0
+#define AR5K_EEPROM_MODE_11B 1
+#define AR5K_EEPROM_MODE_11G 2
+
+#define AR5K_EEPROM_HDR AR5K_EEPROM_INFO(2) /* Header that contains the device caps */
+#define AR5K_EEPROM_HDR_11A(_v) (((_v) >> AR5K_EEPROM_MODE_11A) & 0x1)
+#define AR5K_EEPROM_HDR_11B(_v) (((_v) >> AR5K_EEPROM_MODE_11B) & 0x1)
+#define AR5K_EEPROM_HDR_11G(_v) (((_v) >> AR5K_EEPROM_MODE_11G) & 0x1)
+#define AR5K_EEPROM_HDR_T_2GHZ_DIS(_v) (((_v) >> 3) & 0x1) /* Disable turbo for 2GHz */
+#define AR5K_EEPROM_HDR_T_5GHZ_DBM(_v) (((_v) >> 4) & 0x7f) /* Max turbo power for < 2W power consumption */
+#define AR5K_EEPROM_HDR_DEVICE(_v) (((_v) >> 11) & 0x7) /* Device type (1 Cardbus, 2 PCI, 3 MiniPCI, 4 AP) */
+#define AR5K_EEPROM_HDR_RFKILL(_v) (((_v) >> 14) & 0x1) /* Device has RFKill support */
+#define AR5K_EEPROM_HDR_T_5GHZ_DIS(_v) (((_v) >> 15) & 0x1) /* Disable turbo for 5GHz */
+
+/* Newer EEPROMs are using a different offset */
+#define AR5K_EEPROM_OFF(_v, _v3_0, _v3_3) \
+ (((_v) >= AR5K_EEPROM_VERSION_3_3) ? _v3_3 : _v3_0)
+
+#define AR5K_EEPROM_ANT_GAIN(_v) AR5K_EEPROM_OFF(_v, 0x00c4, 0x00c3)
+#define AR5K_EEPROM_ANT_GAIN_5GHZ(_v) ((s8)(((_v) >> 8) & 0xff))
+#define AR5K_EEPROM_ANT_GAIN_2GHZ(_v) ((s8)((_v) & 0xff))
+
+/* Misc values available since EEPROM 4.0 */
+#define AR5K_EEPROM_MISC0 AR5K_EEPROM_INFO(4)
+#define AR5K_EEPROM_EARSTART(_v) ((_v) & 0xfff)
+#define AR5K_EEPROM_HDR_XR2_DIS(_v) (((_v) >> 12) & 0x1)
+#define AR5K_EEPROM_HDR_XR5_DIS(_v) (((_v) >> 13) & 0x1)
+#define AR5K_EEPROM_EEMAP(_v) (((_v) >> 14) & 0x3)
+
+#define AR5K_EEPROM_MISC1 AR5K_EEPROM_INFO(5)
+#define AR5K_EEPROM_TARGET_PWRSTART(_v) ((_v) & 0xfff)
+#define AR5K_EEPROM_HAS32KHZCRYSTAL(_v) (((_v) >> 14) & 0x1) /* has 32KHz crystal for sleep mode */
+#define AR5K_EEPROM_HAS32KHZCRYSTAL_OLD(_v) (((_v) >> 15) & 0x1)
+
+#define AR5K_EEPROM_MISC2 AR5K_EEPROM_INFO(6)
+#define AR5K_EEPROM_EEP_FILE_VERSION(_v) (((_v) >> 8) & 0xff)
+#define AR5K_EEPROM_EAR_FILE_VERSION(_v) ((_v) & 0xff)
+
+#define AR5K_EEPROM_MISC3 AR5K_EEPROM_INFO(7)
+#define AR5K_EEPROM_ART_BUILD_NUM(_v) (((_v) >> 10) & 0x3f)
+#define AR5K_EEPROM_EAR_FILE_ID(_v) ((_v) & 0xff)
+
+#define AR5K_EEPROM_MISC4 AR5K_EEPROM_INFO(8)
+#define AR5K_EEPROM_CAL_DATA_START(_v) (((_v) >> 4) & 0xfff)
+#define AR5K_EEPROM_MASK_R0(_v) (((_v) >> 2) & 0x3) /* modes supported by radio 0 (bit 1: G, bit 2: A) */
+#define AR5K_EEPROM_MASK_R1(_v) ((_v) & 0x3) /* modes supported by radio 1 (bit 1: G, bit 2: A) */
+
+#define AR5K_EEPROM_MISC5 AR5K_EEPROM_INFO(9)
+#define AR5K_EEPROM_COMP_DIS(_v) ((_v) & 0x1) /* disable compression */
+#define AR5K_EEPROM_AES_DIS(_v) (((_v) >> 1) & 0x1) /* disable AES */
+#define AR5K_EEPROM_FF_DIS(_v) (((_v) >> 2) & 0x1) /* disable fast frames */
+#define AR5K_EEPROM_BURST_DIS(_v) (((_v) >> 3) & 0x1) /* disable bursting */
+#define AR5K_EEPROM_MAX_QCU(_v) (((_v) >> 4) & 0xf) /* max number of QCUs. defaults to 10 */
+#define AR5K_EEPROM_HEAVY_CLIP_EN(_v) (((_v) >> 8) & 0x1) /* enable heavy clipping */
+#define AR5K_EEPROM_KEY_CACHE_SIZE(_v) (((_v) >> 12) & 0xf) /* key cache size. defaults to 128 */
+
+#define AR5K_EEPROM_MISC6 AR5K_EEPROM_INFO(10)
+#define AR5K_EEPROM_TX_CHAIN_DIS ((_v) & 0x7) /* MIMO chains disabled for TX bitmask */
+#define AR5K_EEPROM_RX_CHAIN_DIS (((_v) >> 3) & 0x7) /* MIMO chains disabled for RX bitmask */
+#define AR5K_EEPROM_FCC_MID_EN (((_v) >> 6) & 0x1) /* 5.47-5.7GHz supported */
+#define AR5K_EEPROM_JAP_U1EVEN_EN (((_v) >> 7) & 0x1) /* Japan UNII1 band (5.15-5.25GHz) on even channels (5180, 5200, 5220, 5240) supported */
+#define AR5K_EEPROM_JAP_U2_EN (((_v) >> 8) & 0x1) /* Japan UNII2 band (5.25-5.35GHz) supported */
+#define AR5K_EEPROM_JAP_MID_EN (((_v) >> 9) & 0x1) /* Japan band from 5.47-5.7GHz supported */
+#define AR5K_EEPROM_JAP_U1ODD_EN (((_v) >> 10) & 0x1) /* Japan UNII2 band (5.15-5.25GHz) on odd channels (5170, 5190, 5210, 5230) supported */
+#define AR5K_EEPROM_JAP_11A_NEW_EN (((_v) >> 11) & 0x1) /* Japan A mode enabled (using even channels) */
+
+/* calibration settings */
+#define AR5K_EEPROM_MODES_11A(_v) AR5K_EEPROM_OFF(_v, 0x00c5, 0x00d4)
+#define AR5K_EEPROM_MODES_11B(_v) AR5K_EEPROM_OFF(_v, 0x00d0, 0x00f2)
+#define AR5K_EEPROM_MODES_11G(_v) AR5K_EEPROM_OFF(_v, 0x00da, 0x010d)
+#define AR5K_EEPROM_CTL(_v) AR5K_EEPROM_OFF(_v, 0x00e4, 0x0128) /* Conformance test limits */
+#define AR5K_EEPROM_GROUPS_START(_v) AR5K_EEPROM_OFF(_v, 0x0100, 0x0150) /* Start of Groups */
+#define AR5K_EEPROM_GROUP1_OFFSET 0x0
+#define AR5K_EEPROM_GROUP2_OFFSET 0x5
+#define AR5K_EEPROM_GROUP3_OFFSET 0x37
+#define AR5K_EEPROM_GROUP4_OFFSET 0x46
+#define AR5K_EEPROM_GROUP5_OFFSET 0x55
+#define AR5K_EEPROM_GROUP6_OFFSET 0x65
+#define AR5K_EEPROM_GROUP7_OFFSET 0x69
+#define AR5K_EEPROM_GROUP8_OFFSET 0x6f
+
+#define AR5K_EEPROM_TARGET_PWR_OFF_11A(_v) AR5K_EEPROM_OFF(_v, AR5K_EEPROM_GROUPS_START(_v) + \
+ AR5K_EEPROM_GROUP5_OFFSET, 0x0000)
+#define AR5K_EEPROM_TARGET_PWR_OFF_11B(_v) AR5K_EEPROM_OFF(_v, AR5K_EEPROM_GROUPS_START(_v) + \
+ AR5K_EEPROM_GROUP6_OFFSET, 0x0010)
+#define AR5K_EEPROM_TARGET_PWR_OFF_11G(_v) AR5K_EEPROM_OFF(_v, AR5K_EEPROM_GROUPS_START(_v) + \
+ AR5K_EEPROM_GROUP7_OFFSET, 0x0014)
+
+/* [3.1 - 3.3] */
+#define AR5K_EEPROM_OBDB0_2GHZ 0x00ec
+#define AR5K_EEPROM_OBDB1_2GHZ 0x00ed
+
+#define AR5K_EEPROM_PROTECT 0x003f /* EEPROM protect status */
+#define AR5K_EEPROM_PROTECT_RD_0_31 0x0001 /* Read protection bit for offsets 0x0 - 0x1f */
+#define AR5K_EEPROM_PROTECT_WR_0_31 0x0002 /* Write protection bit for offsets 0x0 - 0x1f */
+#define AR5K_EEPROM_PROTECT_RD_32_63 0x0004 /* 0x20 - 0x3f */
+#define AR5K_EEPROM_PROTECT_WR_32_63 0x0008
+#define AR5K_EEPROM_PROTECT_RD_64_127 0x0010 /* 0x40 - 0x7f */
+#define AR5K_EEPROM_PROTECT_WR_64_127 0x0020
+#define AR5K_EEPROM_PROTECT_RD_128_191 0x0040 /* 0x80 - 0xbf (regdom) */
+#define AR5K_EEPROM_PROTECT_WR_128_191 0x0080
+#define AR5K_EEPROM_PROTECT_RD_192_207 0x0100 /* 0xc0 - 0xcf */
+#define AR5K_EEPROM_PROTECT_WR_192_207 0x0200
+#define AR5K_EEPROM_PROTECT_RD_208_223 0x0400 /* 0xd0 - 0xdf */
+#define AR5K_EEPROM_PROTECT_WR_208_223 0x0800
+#define AR5K_EEPROM_PROTECT_RD_224_239 0x1000 /* 0xe0 - 0xef */
+#define AR5K_EEPROM_PROTECT_WR_224_239 0x2000
+#define AR5K_EEPROM_PROTECT_RD_240_255 0x4000 /* 0xf0 - 0xff */
+#define AR5K_EEPROM_PROTECT_WR_240_255 0x8000
+
+/* Some EEPROM defines */
+#define AR5K_EEPROM_EEP_SCALE 100
+#define AR5K_EEPROM_EEP_DELTA 10
+#define AR5K_EEPROM_N_MODES 3
+#define AR5K_EEPROM_N_5GHZ_CHAN 10
+#define AR5K_EEPROM_N_5GHZ_RATE_CHAN 8
+#define AR5K_EEPROM_N_2GHZ_CHAN 3
+#define AR5K_EEPROM_N_2GHZ_CHAN_2413 4
+#define AR5K_EEPROM_N_2GHZ_CHAN_MAX 4
+#define AR5K_EEPROM_MAX_CHAN 10
+#define AR5K_EEPROM_N_PWR_POINTS_5111 11
+#define AR5K_EEPROM_N_PCDAC 11
+#define AR5K_EEPROM_N_PHASE_CAL 5
+#define AR5K_EEPROM_N_TEST_FREQ 8
+#define AR5K_EEPROM_N_EDGES 8
+#define AR5K_EEPROM_N_INTERCEPTS 11
+#define AR5K_EEPROM_FREQ_M(_v) AR5K_EEPROM_OFF(_v, 0x7f, 0xff)
+#define AR5K_EEPROM_PCDAC_M 0x3f
+#define AR5K_EEPROM_PCDAC_START 1
+#define AR5K_EEPROM_PCDAC_STOP 63
+#define AR5K_EEPROM_PCDAC_STEP 1
+#define AR5K_EEPROM_NON_EDGE_M 0x40
+#define AR5K_EEPROM_CHANNEL_POWER 8
+#define AR5K_EEPROM_N_OBDB 4
+#define AR5K_EEPROM_OBDB_DIS 0xffff
+#define AR5K_EEPROM_CHANNEL_DIS 0xff
+#define AR5K_EEPROM_SCALE_OC_DELTA(_x) (((_x) * 2) / 10)
+#define AR5K_EEPROM_N_CTLS(_v) AR5K_EEPROM_OFF(_v, 16, 32)
+#define AR5K_EEPROM_MAX_CTLS 32
+#define AR5K_EEPROM_N_PD_CURVES 4
+#define AR5K_EEPROM_N_XPD0_POINTS 4
+#define AR5K_EEPROM_N_XPD3_POINTS 3
+#define AR5K_EEPROM_N_PD_GAINS 4
+#define AR5K_EEPROM_N_PD_POINTS 5
+#define AR5K_EEPROM_N_INTERCEPT_10_2GHZ 35
+#define AR5K_EEPROM_N_INTERCEPT_10_5GHZ 55
+#define AR5K_EEPROM_POWER_M 0x3f
+#define AR5K_EEPROM_POWER_MIN 0
+#define AR5K_EEPROM_POWER_MAX 3150
+#define AR5K_EEPROM_POWER_STEP 50
+#define AR5K_EEPROM_POWER_TABLE_SIZE 64
+#define AR5K_EEPROM_N_POWER_LOC_11B 4
+#define AR5K_EEPROM_N_POWER_LOC_11G 6
+#define AR5K_EEPROM_I_GAIN 10
+#define AR5K_EEPROM_CCK_OFDM_DELTA 15
+#define AR5K_EEPROM_N_IQ_CAL 2
+/* 5GHz/2GHz */
+enum ath5k_eeprom_freq_bands {
+ AR5K_EEPROM_BAND_5GHZ = 0,
+ AR5K_EEPROM_BAND_2GHZ = 1,
+ AR5K_EEPROM_N_FREQ_BANDS,
+};
+/* Spur chans per freq band */
+#define AR5K_EEPROM_N_SPUR_CHANS 5
+/* fbin value for chan 2464 x2 */
+#define AR5K_EEPROM_5413_SPUR_CHAN_1 1640
+/* fbin value for chan 2420 x2 */
+#define AR5K_EEPROM_5413_SPUR_CHAN_2 1200
+#define AR5K_EEPROM_SPUR_CHAN_MASK 0x3FFF
+#define AR5K_EEPROM_NO_SPUR 0x8000
+#define AR5K_SPUR_CHAN_WIDTH 87
+#define AR5K_SPUR_SYMBOL_WIDTH_BASE_100Hz 3125
+#define AR5K_SPUR_SYMBOL_WIDTH_TURBO_100Hz 6250
+
+#define AR5K_EEPROM_READ(_o, _v) do { \
+ if (!ath5k_hw_nvram_read(ah, (_o), &(_v))) \
+ return -EIO; \
+} while (0)
+
+#define AR5K_EEPROM_READ_HDR(_o, _v) \
+ AR5K_EEPROM_READ(_o, ah->ah_capabilities.cap_eeprom._v); \
+
+enum ath5k_ant_table {
+ AR5K_ANT_CTL = 0, /* Idle switch table settings */
+ AR5K_ANT_SWTABLE_A = 1, /* Switch table for antenna A */
+ AR5K_ANT_SWTABLE_B = 2, /* Switch table for antenna B */
+ AR5K_ANT_MAX,
+};
+
+enum ath5k_ctl_mode {
+ AR5K_CTL_11A = 0,
+ AR5K_CTL_11B = 1,
+ AR5K_CTL_11G = 2,
+ AR5K_CTL_TURBO = 3,
+ AR5K_CTL_TURBOG = 4,
+ AR5K_CTL_2GHT20 = 5,
+ AR5K_CTL_5GHT20 = 6,
+ AR5K_CTL_2GHT40 = 7,
+ AR5K_CTL_5GHT40 = 8,
+ AR5K_CTL_MODE_M = 15,
+};
+
+/* Per channel calibration data, used for power table setup */
+struct ath5k_chan_pcal_info_rf5111 {
+ /* Power levels in half dBm units
+ * for one power curve. */
+ u8 pwr[AR5K_EEPROM_N_PWR_POINTS_5111];
+ /* PCDAC table steps
+ * for the above values */
+ u8 pcdac[AR5K_EEPROM_N_PWR_POINTS_5111];
+ /* Starting PCDAC step */
+ u8 pcdac_min;
+ /* Final PCDAC step */
+ u8 pcdac_max;
+};
+
+struct ath5k_chan_pcal_info_rf5112 {
+ /* Power levels in quarter dBm units
+ * for lower (0) and higher (3)
+ * level curves in 0.25dB units */
+ s8 pwr_x0[AR5K_EEPROM_N_XPD0_POINTS];
+ s8 pwr_x3[AR5K_EEPROM_N_XPD3_POINTS];
+ /* PCDAC table steps
+ * for the above values */
+ u8 pcdac_x0[AR5K_EEPROM_N_XPD0_POINTS];
+ u8 pcdac_x3[AR5K_EEPROM_N_XPD3_POINTS];
+};
+
+struct ath5k_chan_pcal_info_rf2413 {
+ /* Starting pwr/pddac values */
+ s8 pwr_i[AR5K_EEPROM_N_PD_GAINS];
+ u8 pddac_i[AR5K_EEPROM_N_PD_GAINS];
+ /* (pwr,pddac) points
+ * power levels in 0.5dB units */
+ s8 pwr[AR5K_EEPROM_N_PD_GAINS]
+ [AR5K_EEPROM_N_PD_POINTS];
+ u8 pddac[AR5K_EEPROM_N_PD_GAINS]
+ [AR5K_EEPROM_N_PD_POINTS];
+};
+
+enum ath5k_powertable_type {
+ AR5K_PWRTABLE_PWR_TO_PCDAC = 0,
+ AR5K_PWRTABLE_LINEAR_PCDAC = 1,
+ AR5K_PWRTABLE_PWR_TO_PDADC = 2,
+};
+
+struct ath5k_pdgain_info {
+ u8 pd_points;
+ u8 *pd_step;
+ /* Power values are in
+ * 0.25dB units */
+ s16 *pd_pwr;
+};
+
+struct ath5k_chan_pcal_info {
+ /* Frequency */
+ u16 freq;
+ /* Tx power boundaries */
+ s16 max_pwr;
+ s16 min_pwr;
+ union {
+ struct ath5k_chan_pcal_info_rf5111 rf5111_info;
+ struct ath5k_chan_pcal_info_rf5112 rf5112_info;
+ struct ath5k_chan_pcal_info_rf2413 rf2413_info;
+ };
+ /* Raw values used by phy code
+ * Curves are stored in order from lower
+ * gain to higher gain (max txpower -> min txpower) */
+ struct ath5k_pdgain_info *pd_curves;
+};
+
+/* Per rate calibration data for each mode,
+ * used for rate power table setup.
+ * Note: Values in 0.5dB units */
+struct ath5k_rate_pcal_info {
+ u16 freq; /* Frequency */
+ /* Power level for 6-24Mbit/s rates or
+ * 1Mb rate */
+ u16 target_power_6to24;
+ /* Power level for 36Mbit rate or
+ * 2Mb rate */
+ u16 target_power_36;
+ /* Power level for 48Mbit rate or
+ * 5.5Mbit rate */
+ u16 target_power_48;
+ /* Power level for 54Mbit rate or
+ * 11Mbit rate */
+ u16 target_power_54;
+};
+
+/* Power edges for conformance test limits */
+struct ath5k_edge_power {
+ u16 freq;
+ u16 edge; /* in half dBm */
+ bool flag;
+};
+
+/**
+ * struct ath5k_eeprom_info - EEPROM calibration data
+ *
+ * @ee_regdomain: ath/regd.c takes care of COUNTRY_ERD and WORLDWIDE_ROAMING
+ * flags
+ * @ee_ant_gain: Antenna gain in 0.5dB steps signed [5211 only?]
+ * @ee_cck_ofdm_gain_delta: difference in gainF to output the same power for
+ * OFDM and CCK packets
+ * @ee_cck_ofdm_power_delta: power difference between OFDM (6Mbps) and CCK
+ * (11Mbps) rate in G mode. 0.1dB steps
+ * @ee_scaled_cck_delta: for Japan Channel 14: 0.1dB resolution
+ *
+ * @ee_i_cal: Initial I coefficient to correct I/Q mismatch in the receive path
+ * @ee_q_cal: Initial Q coefficient to correct I/Q mismatch in the receive path
+ * @ee_fixed_bias: use ee_ob and ee_db settings or use automatic control
+ * @ee_switch_settling: RX/TX Switch settling time
+ * @ee_atn_tx_rx: Difference in attenuation between TX and RX in 1dB steps
+ * @ee_ant_control: Antenna Control Settings
+ * @ee_ob: Bias current for Output stage of PA
+ * B/G mode: Index [0] is used for AR2112/5112, otherwise [1]
+ * A mode: [0] 5.15-5.25 [1] 5.25-5.50 [2] 5.50-5.70 [3] 5.70-5.85 GHz
+ * @ee_db: Bias current for Output stage of PA. see @ee_ob
+ * @ee_tx_end2xlna_enable: Time difference from when BB finishes sending a frame
+ * to when the external LNA is activated
+ * @ee_tx_end2xpa_disable: Time difference from when BB finishes sending a frame
+ * to when the external PA switch is deactivated
+ * @ee_tx_frm2xpa_enable: Time difference from when MAC sends frame to when
+ * external PA switch is activated
+ * @ee_thr_62: Clear Channel Assessment (CCA) sensitivity
+ * (IEEE802.11a section 17.3.10.5 )
+ * @ee_xlna_gain: Total gain of the LNA (information only)
+ * @ee_xpd: Use external (1) or internal power detector
+ * @ee_x_gain: Gain for external power detector output (differences in EEMAP
+ * versions!)
+ * @ee_i_gain: Initial gain value after reset
+ * @ee_margin_tx_rx: Margin in dB when final attenuation stage should be used
+ *
+ * @ee_false_detect: Backoff in Sensitivity (dB) on channels with spur signals
+ * @ee_noise_floor_thr: Noise floor threshold in 1dB steps
+ * @ee_adc_desired_size: Desired amplitude for ADC, used by AGC; in 0.5 dB steps
+ * @ee_pga_desired_size: Desired output of PGA (for BB gain) in 0.5 dB steps
+ * @ee_pd_gain_overlap: PD ADC curves need to overlap in 0.5dB steps (ee_map>=2)
+ */
+struct ath5k_eeprom_info {
+
+ /* Header information */
+ u16 ee_magic;
+ u16 ee_protect;
+ u16 ee_regdomain;
+ u16 ee_version;
+ u16 ee_header;
+ u16 ee_ant_gain;
+ u8 ee_rfkill_pin;
+ bool ee_rfkill_pol;
+ bool ee_is_hb63;
+ bool ee_serdes;
+ u16 ee_misc0;
+ u16 ee_misc1;
+ u16 ee_misc2;
+ u16 ee_misc3;
+ u16 ee_misc4;
+ u16 ee_misc5;
+ u16 ee_misc6;
+ u16 ee_cck_ofdm_gain_delta;
+ u16 ee_cck_ofdm_power_delta;
+ u16 ee_scaled_cck_delta;
+
+ /* RF Calibration settings (reset, rfregs) */
+ u16 ee_i_cal[AR5K_EEPROM_N_MODES];
+ u16 ee_q_cal[AR5K_EEPROM_N_MODES];
+ u16 ee_fixed_bias[AR5K_EEPROM_N_MODES];
+ u16 ee_turbo_max_power[AR5K_EEPROM_N_MODES];
+ u16 ee_xr_power[AR5K_EEPROM_N_MODES];
+ u16 ee_switch_settling[AR5K_EEPROM_N_MODES];
+ u16 ee_atn_tx_rx[AR5K_EEPROM_N_MODES];
+ u16 ee_ant_control[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_PCDAC];
+ u16 ee_ob[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_OBDB];
+ u16 ee_db[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_OBDB];
+ u16 ee_tx_end2xlna_enable[AR5K_EEPROM_N_MODES];
+ u16 ee_tx_end2xpa_disable[AR5K_EEPROM_N_MODES];
+ u16 ee_tx_frm2xpa_enable[AR5K_EEPROM_N_MODES];
+ u16 ee_thr_62[AR5K_EEPROM_N_MODES];
+ u16 ee_xlna_gain[AR5K_EEPROM_N_MODES];
+ u16 ee_xpd[AR5K_EEPROM_N_MODES];
+ u16 ee_x_gain[AR5K_EEPROM_N_MODES];
+ u16 ee_i_gain[AR5K_EEPROM_N_MODES];
+ u16 ee_margin_tx_rx[AR5K_EEPROM_N_MODES];
+ u16 ee_switch_settling_turbo[AR5K_EEPROM_N_MODES];
+ u16 ee_margin_tx_rx_turbo[AR5K_EEPROM_N_MODES];
+ u16 ee_atn_tx_rx_turbo[AR5K_EEPROM_N_MODES];
+
+ /* Power calibration data */
+ u16 ee_false_detect[AR5K_EEPROM_N_MODES];
+
+ /* Number of pd gain curves per mode */
+ u8 ee_pd_gains[AR5K_EEPROM_N_MODES];
+ /* Back mapping pdcurve number -> pdcurve index in pd->pd_curves */
+ u8 ee_pdc_to_idx[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_PD_GAINS];
+
+ u8 ee_n_piers[AR5K_EEPROM_N_MODES];
+ struct ath5k_chan_pcal_info ee_pwr_cal_a[AR5K_EEPROM_N_5GHZ_CHAN];
+ struct ath5k_chan_pcal_info ee_pwr_cal_b[AR5K_EEPROM_N_2GHZ_CHAN_MAX];
+ struct ath5k_chan_pcal_info ee_pwr_cal_g[AR5K_EEPROM_N_2GHZ_CHAN_MAX];
+
+ /* Per rate target power levels */
+ u8 ee_rate_target_pwr_num[AR5K_EEPROM_N_MODES];
+ struct ath5k_rate_pcal_info ee_rate_tpwr_a[AR5K_EEPROM_N_5GHZ_CHAN];
+ struct ath5k_rate_pcal_info ee_rate_tpwr_b[AR5K_EEPROM_N_2GHZ_CHAN_MAX];
+ struct ath5k_rate_pcal_info ee_rate_tpwr_g[AR5K_EEPROM_N_2GHZ_CHAN_MAX];
+
+ /* Conformance test limits (Unused) */
+ u8 ee_ctls;
+ u8 ee_ctl[AR5K_EEPROM_MAX_CTLS];
+ struct ath5k_edge_power ee_ctl_pwr[AR5K_EEPROM_N_EDGES * AR5K_EEPROM_MAX_CTLS];
+
+ /* Noise Floor Calibration settings */
+ s16 ee_noise_floor_thr[AR5K_EEPROM_N_MODES];
+ s8 ee_adc_desired_size[AR5K_EEPROM_N_MODES];
+ s8 ee_pga_desired_size[AR5K_EEPROM_N_MODES];
+ s8 ee_adc_desired_size_turbo[AR5K_EEPROM_N_MODES];
+ s8 ee_pga_desired_size_turbo[AR5K_EEPROM_N_MODES];
+ s8 ee_pd_gain_overlap;
+
+ /* Spur mitigation data (fbin values for spur channels) */
+ u16 ee_spur_chans[AR5K_EEPROM_N_SPUR_CHANS][AR5K_EEPROM_N_FREQ_BANDS];
+
+ /* Antenna raw switch tables */
+ u32 ee_antenna[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX];
+};
diff --git a/drivers/net/wireless/ath/ath5k/gpio.c b/drivers/net/wireless/ath/ath5k/gpio.c
new file mode 100644
index 000000000..73d3dd8a3
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/gpio.c
@@ -0,0 +1,213 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/****************\
+ GPIO Functions
+\****************/
+
+#include "ath5k.h"
+#include "reg.h"
+#include "debug.h"
+
+
+/**
+ * DOC: GPIO/LED functions
+ *
+ * Here we control the 6 bidirectional GPIO pins provided by the hw.
+ * We can set a GPIO pin to be an input or an output pin on GPIO control
+ * register and then read or set its status from GPIO data input/output
+ * registers.
+ *
+ * We also control the two LED pins provided by the hw, LED_0 is our
+ * "power" LED and LED_1 is our "network activity" LED but many scenarios
+ * are available from hw. Vendors might also provide LEDs connected to the
+ * GPIO pins, we handle them through the LED subsystem on led.c
+ */
+
+
+/**
+ * ath5k_hw_set_ledstate() - Set led state
+ * @ah: The &struct ath5k_hw
+ * @state: One of AR5K_LED_*
+ *
+ * Used to set the LED blinking state. This only
+ * works for the LED connected to the LED_0, LED_1 pins,
+ * not the GPIO based.
+ */
+void
+ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state)
+{
+ u32 led;
+ /*5210 has different led mode handling*/
+ u32 led_5210;
+
+ /*Reset led status*/
+ if (ah->ah_version != AR5K_AR5210)
+ AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG,
+ AR5K_PCICFG_LEDMODE | AR5K_PCICFG_LED);
+ else
+ AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_LED);
+
+ /*
+ * Some blinking values, define at your wish
+ */
+ switch (state) {
+ case AR5K_LED_SCAN:
+ case AR5K_LED_AUTH:
+ led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_PEND;
+ led_5210 = AR5K_PCICFG_LED_PEND | AR5K_PCICFG_LED_BCTL;
+ break;
+
+ case AR5K_LED_INIT:
+ led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_NONE;
+ led_5210 = AR5K_PCICFG_LED_PEND;
+ break;
+
+ case AR5K_LED_ASSOC:
+ case AR5K_LED_RUN:
+ led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_ASSOC;
+ led_5210 = AR5K_PCICFG_LED_ASSOC;
+ break;
+
+ default:
+ led = AR5K_PCICFG_LEDMODE_PROM | AR5K_PCICFG_LED_NONE;
+ led_5210 = AR5K_PCICFG_LED_PEND;
+ break;
+ }
+
+ /*Write new status to the register*/
+ if (ah->ah_version != AR5K_AR5210)
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, led);
+ else
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, led_5210);
+}
+
+/**
+ * ath5k_hw_set_gpio_input() - Set GPIO inputs
+ * @ah: The &struct ath5k_hw
+ * @gpio: GPIO pin to set as input
+ */
+int
+ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio)
+{
+ if (gpio >= AR5K_NUM_GPIO)
+ return -EINVAL;
+
+ ath5k_hw_reg_write(ah,
+ (ath5k_hw_reg_read(ah, AR5K_GPIOCR) & ~AR5K_GPIOCR_OUT(gpio))
+ | AR5K_GPIOCR_IN(gpio), AR5K_GPIOCR);
+
+ return 0;
+}
+
+/**
+ * ath5k_hw_set_gpio_output() - Set GPIO outputs
+ * @ah: The &struct ath5k_hw
+ * @gpio: The GPIO pin to set as output
+ */
+int
+ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio)
+{
+ if (gpio >= AR5K_NUM_GPIO)
+ return -EINVAL;
+
+ ath5k_hw_reg_write(ah,
+ (ath5k_hw_reg_read(ah, AR5K_GPIOCR) & ~AR5K_GPIOCR_OUT(gpio))
+ | AR5K_GPIOCR_OUT(gpio), AR5K_GPIOCR);
+
+ return 0;
+}
+
+/**
+ * ath5k_hw_get_gpio() - Get GPIO state
+ * @ah: The &struct ath5k_hw
+ * @gpio: The GPIO pin to read
+ */
+u32
+ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio)
+{
+ if (gpio >= AR5K_NUM_GPIO)
+ return 0xffffffff;
+
+ /* GPIO input magic */
+ return ((ath5k_hw_reg_read(ah, AR5K_GPIODI) & AR5K_GPIODI_M) >> gpio) &
+ 0x1;
+}
+
+/**
+ * ath5k_hw_set_gpio() - Set GPIO state
+ * @ah: The &struct ath5k_hw
+ * @gpio: The GPIO pin to set
+ * @val: Value to set (boolean)
+ */
+int
+ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val)
+{
+ u32 data;
+
+ if (gpio >= AR5K_NUM_GPIO)
+ return -EINVAL;
+
+ /* GPIO output magic */
+ data = ath5k_hw_reg_read(ah, AR5K_GPIODO);
+
+ data &= ~(1 << gpio);
+ data |= (val & 1) << gpio;
+
+ ath5k_hw_reg_write(ah, data, AR5K_GPIODO);
+
+ return 0;
+}
+
+/**
+ * ath5k_hw_set_gpio_intr() - Initialize the GPIO interrupt (RFKill switch)
+ * @ah: The &struct ath5k_hw
+ * @gpio: The GPIO pin to use
+ * @interrupt_level: True to generate interrupt on active pin (high)
+ *
+ * This function is used to set up the GPIO interrupt for the hw RFKill switch.
+ * That switch is connected to a GPIO pin and it's number is stored on EEPROM.
+ * It can either open or close the circuit to indicate that we should disable
+ * RF/Wireless to save power (we also get that from EEPROM).
+ */
+void
+ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio,
+ u32 interrupt_level)
+{
+ u32 data;
+
+ if (gpio >= AR5K_NUM_GPIO)
+ return;
+
+ /*
+ * Set the GPIO interrupt
+ */
+ data = (ath5k_hw_reg_read(ah, AR5K_GPIOCR) &
+ ~(AR5K_GPIOCR_INT_SEL(gpio) | AR5K_GPIOCR_INT_SELH |
+ AR5K_GPIOCR_INT_ENA | AR5K_GPIOCR_OUT(gpio))) |
+ (AR5K_GPIOCR_INT_SEL(gpio) | AR5K_GPIOCR_INT_ENA);
+
+ ath5k_hw_reg_write(ah, interrupt_level ? data :
+ (data | AR5K_GPIOCR_INT_SELH), AR5K_GPIOCR);
+
+ ah->ah_imr |= AR5K_IMR_GPIO;
+
+ /* Enable GPIO interrupts */
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PIMR, AR5K_IMR_GPIO);
+}
+
diff --git a/drivers/net/wireless/ath/ath5k/initvals.c b/drivers/net/wireless/ath/ath5k/initvals.c
new file mode 100644
index 000000000..ee1c2fa8b
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/initvals.c
@@ -0,0 +1,1605 @@
+/*
+ * Initial register settings functions
+ *
+ * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2009 Nick Kossifidis <mickflemm@gmail.com>
+ * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include "ath5k.h"
+#include "reg.h"
+#include "debug.h"
+
+/**
+ * struct ath5k_ini - Mode-independent initial register writes
+ * @ini_register: Register address
+ * @ini_value: Default value
+ * @ini_mode: 0 to write 1 to read (and clear)
+ */
+struct ath5k_ini {
+ u16 ini_register;
+ u32 ini_value;
+
+ enum {
+ AR5K_INI_WRITE = 0, /* Default */
+ AR5K_INI_READ = 1,
+ } ini_mode;
+};
+
+/**
+ * struct ath5k_ini_mode - Mode specific initial register values
+ * @mode_register: Register address
+ * @mode_value: Set of values for each enum ath5k_driver_mode
+ */
+struct ath5k_ini_mode {
+ u16 mode_register;
+ u32 mode_value[3];
+};
+
+/* Initial register settings for AR5210 */
+static const struct ath5k_ini ar5210_ini[] = {
+ /* PCU and MAC registers */
+ { AR5K_NOQCU_TXDP0, 0 },
+ { AR5K_NOQCU_TXDP1, 0 },
+ { AR5K_RXDP, 0 },
+ { AR5K_CR, 0 },
+ { AR5K_ISR, 0, AR5K_INI_READ },
+ { AR5K_IMR, 0 },
+ { AR5K_IER, AR5K_IER_DISABLE },
+ { AR5K_BSR, 0, AR5K_INI_READ },
+ { AR5K_TXCFG, AR5K_DMASIZE_128B },
+ { AR5K_RXCFG, AR5K_DMASIZE_128B },
+ { AR5K_CFG, AR5K_INIT_CFG },
+ { AR5K_TOPS, 8 },
+ { AR5K_RXNOFRM, 8 },
+ { AR5K_RPGTO, 0 },
+ { AR5K_TXNOFRM, 0 },
+ { AR5K_SFR, 0 },
+ { AR5K_MIBC, 0 },
+ { AR5K_MISC, 0 },
+ { AR5K_RX_FILTER_5210, 0 },
+ { AR5K_MCAST_FILTER0_5210, 0 },
+ { AR5K_MCAST_FILTER1_5210, 0 },
+ { AR5K_TX_MASK0, 0 },
+ { AR5K_TX_MASK1, 0 },
+ { AR5K_CLR_TMASK, 0 },
+ { AR5K_TRIG_LVL, AR5K_TUNE_MIN_TX_FIFO_THRES },
+ { AR5K_DIAG_SW_5210, 0 },
+ { AR5K_RSSI_THR, AR5K_TUNE_RSSI_THRES },
+ { AR5K_TSF_L32_5210, 0 },
+ { AR5K_TIMER0_5210, 0 },
+ { AR5K_TIMER1_5210, 0xffffffff },
+ { AR5K_TIMER2_5210, 0xffffffff },
+ { AR5K_TIMER3_5210, 1 },
+ { AR5K_CFP_DUR_5210, 0 },
+ { AR5K_CFP_PERIOD_5210, 0 },
+ /* PHY registers */
+ { AR5K_PHY(0), 0x00000047 },
+ { AR5K_PHY_AGC, 0x00000000 },
+ { AR5K_PHY(3), 0x09848ea6 },
+ { AR5K_PHY(4), 0x3d32e000 },
+ { AR5K_PHY(5), 0x0000076b },
+ { AR5K_PHY_ACT, AR5K_PHY_ACT_DISABLE },
+ { AR5K_PHY(8), 0x02020200 },
+ { AR5K_PHY(9), 0x00000e0e },
+ { AR5K_PHY(10), 0x0a020201 },
+ { AR5K_PHY(11), 0x00036ffc },
+ { AR5K_PHY(12), 0x00000000 },
+ { AR5K_PHY(13), 0x00000e0e },
+ { AR5K_PHY(14), 0x00000007 },
+ { AR5K_PHY(15), 0x00020100 },
+ { AR5K_PHY(16), 0x89630000 },
+ { AR5K_PHY(17), 0x1372169c },
+ { AR5K_PHY(18), 0x0018b633 },
+ { AR5K_PHY(19), 0x1284613c },
+ { AR5K_PHY(20), 0x0de8b8e0 },
+ { AR5K_PHY(21), 0x00074859 },
+ { AR5K_PHY(22), 0x7e80beba },
+ { AR5K_PHY(23), 0x313a665e },
+ { AR5K_PHY_AGCCTL, 0x00001d08 },
+ { AR5K_PHY(25), 0x0001ce00 },
+ { AR5K_PHY(26), 0x409a4190 },
+ { AR5K_PHY(28), 0x0000000f },
+ { AR5K_PHY(29), 0x00000080 },
+ { AR5K_PHY(30), 0x00000004 },
+ { AR5K_PHY(31), 0x00000018 }, /* 0x987c */
+ { AR5K_PHY(64), 0x00000000 }, /* 0x9900 */
+ { AR5K_PHY(65), 0x00000000 },
+ { AR5K_PHY(66), 0x00000000 },
+ { AR5K_PHY(67), 0x00800000 },
+ { AR5K_PHY(68), 0x00000003 },
+ /* BB gain table (64bytes) */
+ { AR5K_BB_GAIN(0), 0x00000000 },
+ { AR5K_BB_GAIN(1), 0x00000020 },
+ { AR5K_BB_GAIN(2), 0x00000010 },
+ { AR5K_BB_GAIN(3), 0x00000030 },
+ { AR5K_BB_GAIN(4), 0x00000008 },
+ { AR5K_BB_GAIN(5), 0x00000028 },
+ { AR5K_BB_GAIN(6), 0x00000028 },
+ { AR5K_BB_GAIN(7), 0x00000004 },
+ { AR5K_BB_GAIN(8), 0x00000024 },
+ { AR5K_BB_GAIN(9), 0x00000014 },
+ { AR5K_BB_GAIN(10), 0x00000034 },
+ { AR5K_BB_GAIN(11), 0x0000000c },
+ { AR5K_BB_GAIN(12), 0x0000002c },
+ { AR5K_BB_GAIN(13), 0x00000002 },
+ { AR5K_BB_GAIN(14), 0x00000022 },
+ { AR5K_BB_GAIN(15), 0x00000012 },
+ { AR5K_BB_GAIN(16), 0x00000032 },
+ { AR5K_BB_GAIN(17), 0x0000000a },
+ { AR5K_BB_GAIN(18), 0x0000002a },
+ { AR5K_BB_GAIN(19), 0x00000001 },
+ { AR5K_BB_GAIN(20), 0x00000021 },
+ { AR5K_BB_GAIN(21), 0x00000011 },
+ { AR5K_BB_GAIN(22), 0x00000031 },
+ { AR5K_BB_GAIN(23), 0x00000009 },
+ { AR5K_BB_GAIN(24), 0x00000029 },
+ { AR5K_BB_GAIN(25), 0x00000005 },
+ { AR5K_BB_GAIN(26), 0x00000025 },
+ { AR5K_BB_GAIN(27), 0x00000015 },
+ { AR5K_BB_GAIN(28), 0x00000035 },
+ { AR5K_BB_GAIN(29), 0x0000000d },
+ { AR5K_BB_GAIN(30), 0x0000002d },
+ { AR5K_BB_GAIN(31), 0x00000003 },
+ { AR5K_BB_GAIN(32), 0x00000023 },
+ { AR5K_BB_GAIN(33), 0x00000013 },
+ { AR5K_BB_GAIN(34), 0x00000033 },
+ { AR5K_BB_GAIN(35), 0x0000000b },
+ { AR5K_BB_GAIN(36), 0x0000002b },
+ { AR5K_BB_GAIN(37), 0x00000007 },
+ { AR5K_BB_GAIN(38), 0x00000027 },
+ { AR5K_BB_GAIN(39), 0x00000017 },
+ { AR5K_BB_GAIN(40), 0x00000037 },
+ { AR5K_BB_GAIN(41), 0x0000000f },
+ { AR5K_BB_GAIN(42), 0x0000002f },
+ { AR5K_BB_GAIN(43), 0x0000002f },
+ { AR5K_BB_GAIN(44), 0x0000002f },
+ { AR5K_BB_GAIN(45), 0x0000002f },
+ { AR5K_BB_GAIN(46), 0x0000002f },
+ { AR5K_BB_GAIN(47), 0x0000002f },
+ { AR5K_BB_GAIN(48), 0x0000002f },
+ { AR5K_BB_GAIN(49), 0x0000002f },
+ { AR5K_BB_GAIN(50), 0x0000002f },
+ { AR5K_BB_GAIN(51), 0x0000002f },
+ { AR5K_BB_GAIN(52), 0x0000002f },
+ { AR5K_BB_GAIN(53), 0x0000002f },
+ { AR5K_BB_GAIN(54), 0x0000002f },
+ { AR5K_BB_GAIN(55), 0x0000002f },
+ { AR5K_BB_GAIN(56), 0x0000002f },
+ { AR5K_BB_GAIN(57), 0x0000002f },
+ { AR5K_BB_GAIN(58), 0x0000002f },
+ { AR5K_BB_GAIN(59), 0x0000002f },
+ { AR5K_BB_GAIN(60), 0x0000002f },
+ { AR5K_BB_GAIN(61), 0x0000002f },
+ { AR5K_BB_GAIN(62), 0x0000002f },
+ { AR5K_BB_GAIN(63), 0x0000002f },
+ /* 5110 RF gain table (64btes) */
+ { AR5K_RF_GAIN(0), 0x0000001d },
+ { AR5K_RF_GAIN(1), 0x0000005d },
+ { AR5K_RF_GAIN(2), 0x0000009d },
+ { AR5K_RF_GAIN(3), 0x000000dd },
+ { AR5K_RF_GAIN(4), 0x0000011d },
+ { AR5K_RF_GAIN(5), 0x00000021 },
+ { AR5K_RF_GAIN(6), 0x00000061 },
+ { AR5K_RF_GAIN(7), 0x000000a1 },
+ { AR5K_RF_GAIN(8), 0x000000e1 },
+ { AR5K_RF_GAIN(9), 0x00000031 },
+ { AR5K_RF_GAIN(10), 0x00000071 },
+ { AR5K_RF_GAIN(11), 0x000000b1 },
+ { AR5K_RF_GAIN(12), 0x0000001c },
+ { AR5K_RF_GAIN(13), 0x0000005c },
+ { AR5K_RF_GAIN(14), 0x00000029 },
+ { AR5K_RF_GAIN(15), 0x00000069 },
+ { AR5K_RF_GAIN(16), 0x000000a9 },
+ { AR5K_RF_GAIN(17), 0x00000020 },
+ { AR5K_RF_GAIN(18), 0x00000019 },
+ { AR5K_RF_GAIN(19), 0x00000059 },
+ { AR5K_RF_GAIN(20), 0x00000099 },
+ { AR5K_RF_GAIN(21), 0x00000030 },
+ { AR5K_RF_GAIN(22), 0x00000005 },
+ { AR5K_RF_GAIN(23), 0x00000025 },
+ { AR5K_RF_GAIN(24), 0x00000065 },
+ { AR5K_RF_GAIN(25), 0x000000a5 },
+ { AR5K_RF_GAIN(26), 0x00000028 },
+ { AR5K_RF_GAIN(27), 0x00000068 },
+ { AR5K_RF_GAIN(28), 0x0000001f },
+ { AR5K_RF_GAIN(29), 0x0000001e },
+ { AR5K_RF_GAIN(30), 0x00000018 },
+ { AR5K_RF_GAIN(31), 0x00000058 },
+ { AR5K_RF_GAIN(32), 0x00000098 },
+ { AR5K_RF_GAIN(33), 0x00000003 },
+ { AR5K_RF_GAIN(34), 0x00000004 },
+ { AR5K_RF_GAIN(35), 0x00000044 },
+ { AR5K_RF_GAIN(36), 0x00000084 },
+ { AR5K_RF_GAIN(37), 0x00000013 },
+ { AR5K_RF_GAIN(38), 0x00000012 },
+ { AR5K_RF_GAIN(39), 0x00000052 },
+ { AR5K_RF_GAIN(40), 0x00000092 },
+ { AR5K_RF_GAIN(41), 0x000000d2 },
+ { AR5K_RF_GAIN(42), 0x0000002b },
+ { AR5K_RF_GAIN(43), 0x0000002a },
+ { AR5K_RF_GAIN(44), 0x0000006a },
+ { AR5K_RF_GAIN(45), 0x000000aa },
+ { AR5K_RF_GAIN(46), 0x0000001b },
+ { AR5K_RF_GAIN(47), 0x0000001a },
+ { AR5K_RF_GAIN(48), 0x0000005a },
+ { AR5K_RF_GAIN(49), 0x0000009a },
+ { AR5K_RF_GAIN(50), 0x000000da },
+ { AR5K_RF_GAIN(51), 0x00000006 },
+ { AR5K_RF_GAIN(52), 0x00000006 },
+ { AR5K_RF_GAIN(53), 0x00000006 },
+ { AR5K_RF_GAIN(54), 0x00000006 },
+ { AR5K_RF_GAIN(55), 0x00000006 },
+ { AR5K_RF_GAIN(56), 0x00000006 },
+ { AR5K_RF_GAIN(57), 0x00000006 },
+ { AR5K_RF_GAIN(58), 0x00000006 },
+ { AR5K_RF_GAIN(59), 0x00000006 },
+ { AR5K_RF_GAIN(60), 0x00000006 },
+ { AR5K_RF_GAIN(61), 0x00000006 },
+ { AR5K_RF_GAIN(62), 0x00000006 },
+ { AR5K_RF_GAIN(63), 0x00000006 },
+ /* PHY activation */
+ { AR5K_PHY(53), 0x00000020 },
+ { AR5K_PHY(51), 0x00000004 },
+ { AR5K_PHY(50), 0x00060106 },
+ { AR5K_PHY(39), 0x0000006d },
+ { AR5K_PHY(48), 0x00000000 },
+ { AR5K_PHY(52), 0x00000014 },
+ { AR5K_PHY_ACT, AR5K_PHY_ACT_ENABLE },
+};
+
+/* Initial register settings for AR5211 */
+static const struct ath5k_ini ar5211_ini[] = {
+ { AR5K_RXDP, 0x00000000 },
+ { AR5K_RTSD0, 0x84849c9c },
+ { AR5K_RTSD1, 0x7c7c7c7c },
+ { AR5K_RXCFG, 0x00000005 },
+ { AR5K_MIBC, 0x00000000 },
+ { AR5K_TOPS, 0x00000008 },
+ { AR5K_RXNOFRM, 0x00000008 },
+ { AR5K_TXNOFRM, 0x00000010 },
+ { AR5K_RPGTO, 0x00000000 },
+ { AR5K_RFCNT, 0x0000001f },
+ { AR5K_QUEUE_TXDP(0), 0x00000000 },
+ { AR5K_QUEUE_TXDP(1), 0x00000000 },
+ { AR5K_QUEUE_TXDP(2), 0x00000000 },
+ { AR5K_QUEUE_TXDP(3), 0x00000000 },
+ { AR5K_QUEUE_TXDP(4), 0x00000000 },
+ { AR5K_QUEUE_TXDP(5), 0x00000000 },
+ { AR5K_QUEUE_TXDP(6), 0x00000000 },
+ { AR5K_QUEUE_TXDP(7), 0x00000000 },
+ { AR5K_QUEUE_TXDP(8), 0x00000000 },
+ { AR5K_QUEUE_TXDP(9), 0x00000000 },
+ { AR5K_DCU_FP, 0x00000000 },
+ { AR5K_STA_ID1, 0x00000000 },
+ { AR5K_BSS_ID0, 0x00000000 },
+ { AR5K_BSS_ID1, 0x00000000 },
+ { AR5K_RSSI_THR, 0x00000000 },
+ { AR5K_CFP_PERIOD_5211, 0x00000000 },
+ { AR5K_TIMER0_5211, 0x00000030 },
+ { AR5K_TIMER1_5211, 0x0007ffff },
+ { AR5K_TIMER2_5211, 0x01ffffff },
+ { AR5K_TIMER3_5211, 0x00000031 },
+ { AR5K_CFP_DUR_5211, 0x00000000 },
+ { AR5K_RX_FILTER_5211, 0x00000000 },
+ { AR5K_MCAST_FILTER0_5211, 0x00000000 },
+ { AR5K_MCAST_FILTER1_5211, 0x00000002 },
+ { AR5K_DIAG_SW_5211, 0x00000000 },
+ { AR5K_ADDAC_TEST, 0x00000000 },
+ { AR5K_DEFAULT_ANTENNA, 0x00000000 },
+ /* PHY registers */
+ { AR5K_PHY_AGC, 0x00000000 },
+ { AR5K_PHY(3), 0x2d849093 },
+ { AR5K_PHY(4), 0x7d32e000 },
+ { AR5K_PHY(5), 0x00000f6b },
+ { AR5K_PHY_ACT, 0x00000000 },
+ { AR5K_PHY(11), 0x00026ffe },
+ { AR5K_PHY(12), 0x00000000 },
+ { AR5K_PHY(15), 0x00020100 },
+ { AR5K_PHY(16), 0x206a017a },
+ { AR5K_PHY(19), 0x1284613c },
+ { AR5K_PHY(21), 0x00000859 },
+ { AR5K_PHY(26), 0x409a4190 }, /* 0x9868 */
+ { AR5K_PHY(27), 0x050cb081 },
+ { AR5K_PHY(28), 0x0000000f },
+ { AR5K_PHY(29), 0x00000080 },
+ { AR5K_PHY(30), 0x0000000c },
+ { AR5K_PHY(64), 0x00000000 },
+ { AR5K_PHY(65), 0x00000000 },
+ { AR5K_PHY(66), 0x00000000 },
+ { AR5K_PHY(67), 0x00800000 },
+ { AR5K_PHY(68), 0x00000001 },
+ { AR5K_PHY(71), 0x0000092a },
+ { AR5K_PHY_IQ, 0x00000000 },
+ { AR5K_PHY(73), 0x00058a05 },
+ { AR5K_PHY(74), 0x00000001 },
+ { AR5K_PHY(75), 0x00000000 },
+ { AR5K_PHY_PAPD_PROBE, 0x00000000 },
+ { AR5K_PHY(77), 0x00000000 }, /* 0x9934 */
+ { AR5K_PHY(78), 0x00000000 }, /* 0x9938 */
+ { AR5K_PHY(79), 0x0000003f }, /* 0x993c */
+ { AR5K_PHY(80), 0x00000004 },
+ { AR5K_PHY(82), 0x00000000 },
+ { AR5K_PHY(83), 0x00000000 },
+ { AR5K_PHY(84), 0x00000000 },
+ { AR5K_PHY_RADAR, 0x5d50f14c },
+ { AR5K_PHY(86), 0x00000018 },
+ { AR5K_PHY(87), 0x004b6a8e },
+ /* Initial Power table (32bytes)
+ * common on all cards/modes.
+ * Note: Table is rewritten during
+ * txpower setup later using calibration
+ * data etc. so next write is non-common */
+ { AR5K_PHY_PCDAC_TXPOWER(1), 0x06ff05ff },
+ { AR5K_PHY_PCDAC_TXPOWER(2), 0x07ff07ff },
+ { AR5K_PHY_PCDAC_TXPOWER(3), 0x08ff08ff },
+ { AR5K_PHY_PCDAC_TXPOWER(4), 0x09ff09ff },
+ { AR5K_PHY_PCDAC_TXPOWER(5), 0x0aff0aff },
+ { AR5K_PHY_PCDAC_TXPOWER(6), 0x0bff0bff },
+ { AR5K_PHY_PCDAC_TXPOWER(7), 0x0cff0cff },
+ { AR5K_PHY_PCDAC_TXPOWER(8), 0x0dff0dff },
+ { AR5K_PHY_PCDAC_TXPOWER(9), 0x0fff0eff },
+ { AR5K_PHY_PCDAC_TXPOWER(10), 0x12ff12ff },
+ { AR5K_PHY_PCDAC_TXPOWER(11), 0x14ff13ff },
+ { AR5K_PHY_PCDAC_TXPOWER(12), 0x16ff15ff },
+ { AR5K_PHY_PCDAC_TXPOWER(13), 0x19ff17ff },
+ { AR5K_PHY_PCDAC_TXPOWER(14), 0x1bff1aff },
+ { AR5K_PHY_PCDAC_TXPOWER(15), 0x1eff1dff },
+ { AR5K_PHY_PCDAC_TXPOWER(16), 0x23ff20ff },
+ { AR5K_PHY_PCDAC_TXPOWER(17), 0x27ff25ff },
+ { AR5K_PHY_PCDAC_TXPOWER(18), 0x2cff29ff },
+ { AR5K_PHY_PCDAC_TXPOWER(19), 0x31ff2fff },
+ { AR5K_PHY_PCDAC_TXPOWER(20), 0x37ff34ff },
+ { AR5K_PHY_PCDAC_TXPOWER(21), 0x3aff3aff },
+ { AR5K_PHY_PCDAC_TXPOWER(22), 0x3aff3aff },
+ { AR5K_PHY_PCDAC_TXPOWER(23), 0x3aff3aff },
+ { AR5K_PHY_PCDAC_TXPOWER(24), 0x3aff3aff },
+ { AR5K_PHY_PCDAC_TXPOWER(25), 0x3aff3aff },
+ { AR5K_PHY_PCDAC_TXPOWER(26), 0x3aff3aff },
+ { AR5K_PHY_PCDAC_TXPOWER(27), 0x3aff3aff },
+ { AR5K_PHY_PCDAC_TXPOWER(28), 0x3aff3aff },
+ { AR5K_PHY_PCDAC_TXPOWER(29), 0x3aff3aff },
+ { AR5K_PHY_PCDAC_TXPOWER(30), 0x3aff3aff },
+ { AR5K_PHY_PCDAC_TXPOWER(31), 0x3aff3aff },
+ { AR5K_PHY_CCKTXCTL, 0x00000000 },
+ { AR5K_PHY(642), 0x503e4646 },
+ { AR5K_PHY_GAIN_2GHZ, 0x6480416c },
+ { AR5K_PHY(644), 0x0199a003 },
+ { AR5K_PHY(645), 0x044cd610 },
+ { AR5K_PHY(646), 0x13800040 },
+ { AR5K_PHY(647), 0x1be00060 },
+ { AR5K_PHY(648), 0x0c53800a },
+ { AR5K_PHY(649), 0x0014df3b },
+ { AR5K_PHY(650), 0x000001b5 },
+ { AR5K_PHY(651), 0x00000020 },
+};
+
+/* Initial mode-specific settings for AR5211
+ * 5211 supports OFDM-only g (draft g) but we
+ * need to test it ! */
+static const struct ath5k_ini_mode ar5211_ini_mode[] = {
+ { AR5K_TXCFG,
+ /* A B G */
+ { 0x00000015, 0x0000001d, 0x00000015 } },
+ { AR5K_QUEUE_DFS_LOCAL_IFS(0),
+ { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
+ { AR5K_QUEUE_DFS_LOCAL_IFS(1),
+ { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
+ { AR5K_QUEUE_DFS_LOCAL_IFS(2),
+ { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
+ { AR5K_QUEUE_DFS_LOCAL_IFS(3),
+ { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
+ { AR5K_QUEUE_DFS_LOCAL_IFS(4),
+ { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
+ { AR5K_QUEUE_DFS_LOCAL_IFS(5),
+ { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
+ { AR5K_QUEUE_DFS_LOCAL_IFS(6),
+ { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
+ { AR5K_QUEUE_DFS_LOCAL_IFS(7),
+ { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
+ { AR5K_QUEUE_DFS_LOCAL_IFS(8),
+ { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
+ { AR5K_QUEUE_DFS_LOCAL_IFS(9),
+ { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
+ { AR5K_DCU_GBL_IFS_SLOT,
+ { 0x00000168, 0x000001b8, 0x00000168 } },
+ { AR5K_DCU_GBL_IFS_SIFS,
+ { 0x00000230, 0x000000b0, 0x00000230 } },
+ { AR5K_DCU_GBL_IFS_EIFS,
+ { 0x00000d98, 0x00001f48, 0x00000d98 } },
+ { AR5K_DCU_GBL_IFS_MISC,
+ { 0x0000a0e0, 0x00005880, 0x0000a0e0 } },
+ { AR5K_TIME_OUT,
+ { 0x04000400, 0x20003000, 0x04000400 } },
+ { AR5K_USEC_5211,
+ { 0x0e8d8fa7, 0x01608f95, 0x0e8d8fa7 } },
+ { AR5K_PHY(8),
+ { 0x02020200, 0x02010200, 0x02020200 } },
+ { AR5K_PHY_RF_CTL2,
+ { 0x00000e0e, 0x00000707, 0x00000e0e } },
+ { AR5K_PHY_RF_CTL3,
+ { 0x0a020001, 0x05010000, 0x0a020001 } },
+ { AR5K_PHY_RF_CTL4,
+ { 0x00000e0e, 0x00000e0e, 0x00000e0e } },
+ { AR5K_PHY_PA_CTL,
+ { 0x00000007, 0x0000000b, 0x0000000b } },
+ { AR5K_PHY_SETTLING,
+ { 0x1372169c, 0x137216a8, 0x1372169c } },
+ { AR5K_PHY_GAIN,
+ { 0x0018ba67, 0x0018ba69, 0x0018ba69 } },
+ { AR5K_PHY_DESIRED_SIZE,
+ { 0x0c28b4e0, 0x0c28b4e0, 0x0c28b4e0 } },
+ { AR5K_PHY_SIG,
+ { 0x7e800d2e, 0x7ec00d2e, 0x7e800d2e } },
+ { AR5K_PHY_AGCCOARSE,
+ { 0x31375d5e, 0x313a5d5e, 0x31375d5e } },
+ { AR5K_PHY_AGCCTL,
+ { 0x0000bd10, 0x0000bd38, 0x0000bd10 } },
+ { AR5K_PHY_NF,
+ { 0x0001ce00, 0x0001ce00, 0x0001ce00 } },
+ { AR5K_PHY_RX_DELAY,
+ { 0x00002710, 0x0000157c, 0x00002710 } },
+ { AR5K_PHY(70),
+ { 0x00000190, 0x00000084, 0x00000190 } },
+ { AR5K_PHY_FRAME_CTL_5211,
+ { 0x6fe01020, 0x6fe00920, 0x6fe01020 } },
+ { AR5K_PHY_PCDAC_TXPOWER_BASE,
+ { 0x05ff14ff, 0x05ff14ff, 0x05ff19ff } },
+ { AR5K_RF_BUFFER_CONTROL_4,
+ { 0x00000010, 0x00000010, 0x00000010 } },
+};
+
+/* Initial register settings for AR5212 and newer chips */
+static const struct ath5k_ini ar5212_ini_common_start[] = {
+ { AR5K_RXDP, 0x00000000 },
+ { AR5K_RXCFG, 0x00000005 },
+ { AR5K_MIBC, 0x00000000 },
+ { AR5K_TOPS, 0x00000008 },
+ { AR5K_RXNOFRM, 0x00000008 },
+ { AR5K_TXNOFRM, 0x00000010 },
+ { AR5K_RPGTO, 0x00000000 },
+ { AR5K_RFCNT, 0x0000001f },
+ { AR5K_QUEUE_TXDP(0), 0x00000000 },
+ { AR5K_QUEUE_TXDP(1), 0x00000000 },
+ { AR5K_QUEUE_TXDP(2), 0x00000000 },
+ { AR5K_QUEUE_TXDP(3), 0x00000000 },
+ { AR5K_QUEUE_TXDP(4), 0x00000000 },
+ { AR5K_QUEUE_TXDP(5), 0x00000000 },
+ { AR5K_QUEUE_TXDP(6), 0x00000000 },
+ { AR5K_QUEUE_TXDP(7), 0x00000000 },
+ { AR5K_QUEUE_TXDP(8), 0x00000000 },
+ { AR5K_QUEUE_TXDP(9), 0x00000000 },
+ { AR5K_DCU_FP, 0x00000000 },
+ { AR5K_DCU_TXP, 0x00000000 },
+ /* Tx filter table 0 (32 entries) */
+ { AR5K_DCU_TX_FILTER_0(0), 0x00000000 }, /* DCU 0 */
+ { AR5K_DCU_TX_FILTER_0(1), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_0(2), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_0(3), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_0(4), 0x00000000 }, /* DCU 1 */
+ { AR5K_DCU_TX_FILTER_0(5), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_0(6), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_0(7), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_0(8), 0x00000000 }, /* DCU 2 */
+ { AR5K_DCU_TX_FILTER_0(9), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_0(10), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_0(11), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_0(12), 0x00000000 }, /* DCU 3 */
+ { AR5K_DCU_TX_FILTER_0(13), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_0(14), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_0(15), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_0(16), 0x00000000 }, /* DCU 4 */
+ { AR5K_DCU_TX_FILTER_0(17), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_0(18), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_0(19), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_0(20), 0x00000000 }, /* DCU 5 */
+ { AR5K_DCU_TX_FILTER_0(21), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_0(22), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_0(23), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_0(24), 0x00000000 }, /* DCU 6 */
+ { AR5K_DCU_TX_FILTER_0(25), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_0(26), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_0(27), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_0(28), 0x00000000 }, /* DCU 7 */
+ { AR5K_DCU_TX_FILTER_0(29), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_0(30), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_0(31), 0x00000000 },
+ /* Tx filter table 1 (16 entries) */
+ { AR5K_DCU_TX_FILTER_1(0), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_1(1), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_1(2), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_1(3), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_1(4), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_1(5), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_1(6), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_1(7), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_1(8), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_1(9), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_1(10), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_1(11), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_1(12), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_1(13), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_1(14), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_1(15), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_CLR, 0x00000000 },
+ { AR5K_DCU_TX_FILTER_SET, 0x00000000 },
+ { AR5K_STA_ID1, 0x00000000 },
+ { AR5K_BSS_ID0, 0x00000000 },
+ { AR5K_BSS_ID1, 0x00000000 },
+ { AR5K_BEACON_5211, 0x00000000 },
+ { AR5K_CFP_PERIOD_5211, 0x00000000 },
+ { AR5K_TIMER0_5211, 0x00000030 },
+ { AR5K_TIMER1_5211, 0x0007ffff },
+ { AR5K_TIMER2_5211, 0x01ffffff },
+ { AR5K_TIMER3_5211, 0x00000031 },
+ { AR5K_CFP_DUR_5211, 0x00000000 },
+ { AR5K_RX_FILTER_5211, 0x00000000 },
+ { AR5K_DIAG_SW_5211, 0x00000000 },
+ { AR5K_ADDAC_TEST, 0x00000000 },
+ { AR5K_DEFAULT_ANTENNA, 0x00000000 },
+ { AR5K_FRAME_CTL_QOSM, 0x000fc78f },
+ { AR5K_XRMODE, 0x2a82301a },
+ { AR5K_XRDELAY, 0x05dc01e0 },
+ { AR5K_XRTIMEOUT, 0x1f402710 },
+ { AR5K_XRCHIRP, 0x01f40000 },
+ { AR5K_XRSTOMP, 0x00001e1c },
+ { AR5K_SLEEP0, 0x0002aaaa },
+ { AR5K_SLEEP1, 0x02005555 },
+ { AR5K_SLEEP2, 0x00000000 },
+ { AR_BSSMSKL, 0xffffffff },
+ { AR_BSSMSKU, 0x0000ffff },
+ { AR5K_TXPC, 0x00000000 },
+ { AR5K_PROFCNT_TX, 0x00000000 },
+ { AR5K_PROFCNT_RX, 0x00000000 },
+ { AR5K_PROFCNT_RXCLR, 0x00000000 },
+ { AR5K_PROFCNT_CYCLE, 0x00000000 },
+ { AR5K_QUIET_CTL1, 0x00000088 },
+ /* Initial rate duration table (32 entries )*/
+ { AR5K_RATE_DUR(0), 0x00000000 },
+ { AR5K_RATE_DUR(1), 0x0000008c },
+ { AR5K_RATE_DUR(2), 0x000000e4 },
+ { AR5K_RATE_DUR(3), 0x000002d5 },
+ { AR5K_RATE_DUR(4), 0x00000000 },
+ { AR5K_RATE_DUR(5), 0x00000000 },
+ { AR5K_RATE_DUR(6), 0x000000a0 },
+ { AR5K_RATE_DUR(7), 0x000001c9 },
+ { AR5K_RATE_DUR(8), 0x0000002c },
+ { AR5K_RATE_DUR(9), 0x0000002c },
+ { AR5K_RATE_DUR(10), 0x00000030 },
+ { AR5K_RATE_DUR(11), 0x0000003c },
+ { AR5K_RATE_DUR(12), 0x0000002c },
+ { AR5K_RATE_DUR(13), 0x0000002c },
+ { AR5K_RATE_DUR(14), 0x00000030 },
+ { AR5K_RATE_DUR(15), 0x0000003c },
+ { AR5K_RATE_DUR(16), 0x00000000 },
+ { AR5K_RATE_DUR(17), 0x00000000 },
+ { AR5K_RATE_DUR(18), 0x00000000 },
+ { AR5K_RATE_DUR(19), 0x00000000 },
+ { AR5K_RATE_DUR(20), 0x00000000 },
+ { AR5K_RATE_DUR(21), 0x00000000 },
+ { AR5K_RATE_DUR(22), 0x00000000 },
+ { AR5K_RATE_DUR(23), 0x00000000 },
+ { AR5K_RATE_DUR(24), 0x000000d5 },
+ { AR5K_RATE_DUR(25), 0x000000df },
+ { AR5K_RATE_DUR(26), 0x00000102 },
+ { AR5K_RATE_DUR(27), 0x0000013a },
+ { AR5K_RATE_DUR(28), 0x00000075 },
+ { AR5K_RATE_DUR(29), 0x0000007f },
+ { AR5K_RATE_DUR(30), 0x000000a2 },
+ { AR5K_RATE_DUR(31), 0x00000000 },
+ { AR5K_QUIET_CTL2, 0x00010002 },
+ { AR5K_TSF_PARM, 0x00000001 },
+ { AR5K_QOS_NOACK, 0x000000c0 },
+ { AR5K_PHY_ERR_FIL, 0x00000000 },
+ { AR5K_XRLAT_TX, 0x00000168 },
+ { AR5K_ACKSIFS, 0x00000000 },
+ /* Rate -> db table
+ * notice ...03<-02<-01<-00 ! */
+ { AR5K_RATE2DB(0), 0x03020100 },
+ { AR5K_RATE2DB(1), 0x07060504 },
+ { AR5K_RATE2DB(2), 0x0b0a0908 },
+ { AR5K_RATE2DB(3), 0x0f0e0d0c },
+ { AR5K_RATE2DB(4), 0x13121110 },
+ { AR5K_RATE2DB(5), 0x17161514 },
+ { AR5K_RATE2DB(6), 0x1b1a1918 },
+ { AR5K_RATE2DB(7), 0x1f1e1d1c },
+ /* Db -> Rate table */
+ { AR5K_DB2RATE(0), 0x03020100 },
+ { AR5K_DB2RATE(1), 0x07060504 },
+ { AR5K_DB2RATE(2), 0x0b0a0908 },
+ { AR5K_DB2RATE(3), 0x0f0e0d0c },
+ { AR5K_DB2RATE(4), 0x13121110 },
+ { AR5K_DB2RATE(5), 0x17161514 },
+ { AR5K_DB2RATE(6), 0x1b1a1918 },
+ { AR5K_DB2RATE(7), 0x1f1e1d1c },
+ /* PHY registers (Common settings
+ * for all chips/modes) */
+ { AR5K_PHY(3), 0xad848e19 },
+ { AR5K_PHY(4), 0x7d28e000 },
+ { AR5K_PHY_TIMING_3, 0x9c0a9f6b },
+ { AR5K_PHY_ACT, 0x00000000 },
+ { AR5K_PHY(16), 0x206a017a },
+ { AR5K_PHY(21), 0x00000859 },
+ { AR5K_PHY_BIN_MASK_1, 0x00000000 },
+ { AR5K_PHY_BIN_MASK_2, 0x00000000 },
+ { AR5K_PHY_BIN_MASK_3, 0x00000000 },
+ { AR5K_PHY_BIN_MASK_CTL, 0x00800000 },
+ { AR5K_PHY_ANT_CTL, 0x00000001 },
+ /*{ AR5K_PHY(71), 0x0000092a },*/ /* Old value */
+ { AR5K_PHY_MAX_RX_LEN, 0x00000c80 },
+ { AR5K_PHY_IQ, 0x05100000 },
+ { AR5K_PHY_WARM_RESET, 0x00000001 },
+ { AR5K_PHY_CTL, 0x00000004 },
+ { AR5K_PHY_TXPOWER_RATE1, 0x1e1f2022 },
+ { AR5K_PHY_TXPOWER_RATE2, 0x0a0b0c0d },
+ { AR5K_PHY_TXPOWER_RATE_MAX, 0x0000003f },
+ { AR5K_PHY(82), 0x9280b212 },
+ { AR5K_PHY_RADAR, 0x5d50e188 },
+ /*{ AR5K_PHY(86), 0x000000ff },*/
+ { AR5K_PHY(87), 0x004b6a8e },
+ { AR5K_PHY_NFTHRES, 0x000003ce },
+ { AR5K_PHY_RESTART, 0x192fb515 },
+ { AR5K_PHY(94), 0x00000001 },
+ { AR5K_PHY_RFBUS_REQ, 0x00000000 },
+ /*{ AR5K_PHY(644), 0x0080a333 },*/ /* Old value */
+ /*{ AR5K_PHY(645), 0x00206c10 },*/ /* Old value */
+ { AR5K_PHY(644), 0x00806333 },
+ { AR5K_PHY(645), 0x00106c10 },
+ { AR5K_PHY(646), 0x009c4060 },
+ /* { AR5K_PHY(647), 0x1483800a }, */
+ /* { AR5K_PHY(648), 0x01831061 }, */ /* Old value */
+ { AR5K_PHY(648), 0x018830c6 },
+ { AR5K_PHY(649), 0x00000400 },
+ /*{ AR5K_PHY(650), 0x000001b5 },*/
+ { AR5K_PHY(651), 0x00000000 },
+ { AR5K_PHY_TXPOWER_RATE3, 0x20202020 },
+ { AR5K_PHY_TXPOWER_RATE4, 0x20202020 },
+ /*{ AR5K_PHY(655), 0x13c889af },*/
+ { AR5K_PHY(656), 0x38490a20 },
+ { AR5K_PHY(657), 0x00007bb6 },
+ { AR5K_PHY(658), 0x0fff3ffc },
+};
+
+/* Initial mode-specific settings for AR5212 (Written before ar5212_ini) */
+static const struct ath5k_ini_mode ar5212_ini_mode_start[] = {
+ { AR5K_QUEUE_DFS_LOCAL_IFS(0),
+ /* A/XR B G */
+ { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
+ { AR5K_QUEUE_DFS_LOCAL_IFS(1),
+ { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
+ { AR5K_QUEUE_DFS_LOCAL_IFS(2),
+ { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
+ { AR5K_QUEUE_DFS_LOCAL_IFS(3),
+ { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
+ { AR5K_QUEUE_DFS_LOCAL_IFS(4),
+ { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
+ { AR5K_QUEUE_DFS_LOCAL_IFS(5),
+ { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
+ { AR5K_QUEUE_DFS_LOCAL_IFS(6),
+ { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
+ { AR5K_QUEUE_DFS_LOCAL_IFS(7),
+ { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
+ { AR5K_QUEUE_DFS_LOCAL_IFS(8),
+ { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
+ { AR5K_QUEUE_DFS_LOCAL_IFS(9),
+ { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
+ { AR5K_DCU_GBL_IFS_SIFS,
+ { 0x00000230, 0x000000b0, 0x00000160 } },
+ { AR5K_DCU_GBL_IFS_SLOT,
+ { 0x00000168, 0x000001b8, 0x0000018c } },
+ { AR5K_DCU_GBL_IFS_EIFS,
+ { 0x00000e60, 0x00001f1c, 0x00003e38 } },
+ { AR5K_DCU_GBL_IFS_MISC,
+ { 0x0000a0e0, 0x00005880, 0x0000b0e0 } },
+ { AR5K_TIME_OUT,
+ { 0x03e803e8, 0x04200420, 0x08400840 } },
+ { AR5K_PHY(8),
+ { 0x02020200, 0x02010200, 0x02020200 } },
+ { AR5K_PHY_RF_CTL2,
+ { 0x00000e0e, 0x00000707, 0x00000e0e } },
+ { AR5K_PHY_SETTLING,
+ { 0x1372161c, 0x13721722, 0x137216a2 } },
+ { AR5K_PHY_AGCCTL,
+ { 0x00009d10, 0x00009d18, 0x00009d18 } },
+ { AR5K_PHY_NF,
+ { 0x0001ce00, 0x0001ce00, 0x0001ce00 } },
+ { AR5K_PHY_WEAK_OFDM_HIGH_THR,
+ { 0x409a4190, 0x409a4190, 0x409a4190 } },
+ { AR5K_PHY(70),
+ { 0x000001b8, 0x00000084, 0x00000108 } },
+ { AR5K_PHY_OFDM_SELFCORR,
+ { 0x10058a05, 0x10058a05, 0x10058a05 } },
+ { 0xa230,
+ { 0x00000000, 0x00000000, 0x00000108 } },
+};
+
+/* Initial mode-specific settings for AR5212 + RF5111
+ * (Written after ar5212_ini) */
+static const struct ath5k_ini_mode rf5111_ini_mode_end[] = {
+ { AR5K_TXCFG,
+ /* A/XR B G */
+ { 0x00008015, 0x00008015, 0x00008015 } },
+ { AR5K_USEC_5211,
+ { 0x128d8fa7, 0x04e00f95, 0x12e00fab } },
+ { AR5K_PHY_RF_CTL3,
+ { 0x0a020001, 0x05010100, 0x0a020001 } },
+ { AR5K_PHY_RF_CTL4,
+ { 0x00000e0e, 0x00000e0e, 0x00000e0e } },
+ { AR5K_PHY_PA_CTL,
+ { 0x00000007, 0x0000000b, 0x0000000b } },
+ { AR5K_PHY_GAIN,
+ { 0x0018da5a, 0x0018ca69, 0x0018ca69 } },
+ { AR5K_PHY_DESIRED_SIZE,
+ { 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0 } },
+ { AR5K_PHY_SIG,
+ { 0x7e800d2e, 0x7ee84d2e, 0x7ee84d2e } },
+ { AR5K_PHY_AGCCOARSE,
+ { 0x3137665e, 0x3137665e, 0x3137665e } },
+ { AR5K_PHY_WEAK_OFDM_LOW_THR,
+ { 0x050cb081, 0x050cb081, 0x050cb080 } },
+ { AR5K_PHY_RX_DELAY,
+ { 0x00002710, 0x0000157c, 0x00002af8 } },
+ { AR5K_PHY_FRAME_CTL_5211,
+ { 0xf7b81020, 0xf7b80d20, 0xf7b81020 } },
+ { AR5K_PHY_GAIN_2GHZ,
+ { 0x642c416a, 0x6440416a, 0x6440416a } },
+ { AR5K_PHY_CCK_RX_CTL_4,
+ { 0x1883800a, 0x1873800a, 0x1883800a } },
+};
+
+/* Common for all modes */
+static const struct ath5k_ini rf5111_ini_common_end[] = {
+ { AR5K_DCU_FP, 0x00000000 },
+ { AR5K_PHY_AGC, 0x00000000 },
+ { AR5K_PHY_ADC_CTL, 0x00022ffe },
+ { 0x983c, 0x00020100 },
+ { AR5K_PHY_GAIN_OFFSET, 0x1284613c },
+ { AR5K_PHY_PAPD_PROBE, 0x00004883 },
+ { 0x9940, 0x00000004 },
+ { 0x9958, 0x000000ff },
+ { 0x9974, 0x00000000 },
+ { AR5K_PHY_SPENDING, 0x00000018 },
+ { AR5K_PHY_CCKTXCTL, 0x00000000 },
+ { AR5K_PHY_CCK_CROSSCORR, 0xd03e6788 },
+ { AR5K_PHY_DAG_CCK_CTL, 0x000001b5 },
+ { 0xa23c, 0x13c889af },
+};
+
+
+/* Initial mode-specific settings for AR5212 + RF5112
+ * (Written after ar5212_ini) */
+static const struct ath5k_ini_mode rf5112_ini_mode_end[] = {
+ { AR5K_TXCFG,
+ /* A/XR B G */
+ { 0x00008015, 0x00008015, 0x00008015 } },
+ { AR5K_USEC_5211,
+ { 0x128d93a7, 0x04e01395, 0x12e013ab } },
+ { AR5K_PHY_RF_CTL3,
+ { 0x0a020001, 0x05020100, 0x0a020001 } },
+ { AR5K_PHY_RF_CTL4,
+ { 0x00000e0e, 0x00000e0e, 0x00000e0e } },
+ { AR5K_PHY_PA_CTL,
+ { 0x00000007, 0x0000000b, 0x0000000b } },
+ { AR5K_PHY_GAIN,
+ { 0x0018da6d, 0x0018ca75, 0x0018ca75 } },
+ { AR5K_PHY_DESIRED_SIZE,
+ { 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0 } },
+ { AR5K_PHY_SIG,
+ { 0x7e800d2e, 0x7ee80d2e, 0x7ee80d2e } },
+ { AR5K_PHY_AGCCOARSE,
+ { 0x3137665e, 0x3137665e, 0x3137665e } },
+ { AR5K_PHY_WEAK_OFDM_LOW_THR,
+ { 0x050cb081, 0x050cb081, 0x050cb081 } },
+ { AR5K_PHY_RX_DELAY,
+ { 0x000007d0, 0x0000044c, 0x00000898 } },
+ { AR5K_PHY_FRAME_CTL_5211,
+ { 0xf7b81020, 0xf7b80d10, 0xf7b81010 } },
+ { AR5K_PHY_CCKTXCTL,
+ { 0x00000000, 0x00000008, 0x00000008 } },
+ { AR5K_PHY_CCK_CROSSCORR,
+ { 0xd6be6788, 0xd03e6788, 0xd03e6788 } },
+ { AR5K_PHY_GAIN_2GHZ,
+ { 0x642c0140, 0x6442c160, 0x6442c160 } },
+ { AR5K_PHY_CCK_RX_CTL_4,
+ { 0x1883800a, 0x1873800a, 0x1883800a } },
+};
+
+static const struct ath5k_ini rf5112_ini_common_end[] = {
+ { AR5K_DCU_FP, 0x00000000 },
+ { AR5K_PHY_AGC, 0x00000000 },
+ { AR5K_PHY_ADC_CTL, 0x00022ffe },
+ { 0x983c, 0x00020100 },
+ { AR5K_PHY_GAIN_OFFSET, 0x1284613c },
+ { AR5K_PHY_PAPD_PROBE, 0x00004882 },
+ { 0x9940, 0x00000004 },
+ { 0x9958, 0x000000ff },
+ { 0x9974, 0x00000000 },
+ { AR5K_PHY_DAG_CCK_CTL, 0x000001b5 },
+ { 0xa23c, 0x13c889af },
+};
+
+
+/* Initial mode-specific settings for RF5413/5414
+ * (Written after ar5212_ini) */
+static const struct ath5k_ini_mode rf5413_ini_mode_end[] = {
+ { AR5K_TXCFG,
+ /* A/XR B G */
+ { 0x00000015, 0x00000015, 0x00000015 } },
+ { AR5K_USEC_5211,
+ { 0x128d93a7, 0x04e01395, 0x12e013ab } },
+ { AR5K_PHY_RF_CTL3,
+ { 0x0a020001, 0x05020100, 0x0a020001 } },
+ { AR5K_PHY_RF_CTL4,
+ { 0x00000e0e, 0x00000e0e, 0x00000e0e } },
+ { AR5K_PHY_PA_CTL,
+ { 0x00000007, 0x0000000b, 0x0000000b } },
+ { AR5K_PHY_GAIN,
+ { 0x0018fa61, 0x001a1a63, 0x001a1a63 } },
+ { AR5K_PHY_DESIRED_SIZE,
+ { 0x0c98b4e0, 0x0c98b0da, 0x0c98b0da } },
+ { AR5K_PHY_SIG,
+ { 0x7ec80d2e, 0x7ec80d2e, 0x7ec80d2e } },
+ { AR5K_PHY_AGCCOARSE,
+ { 0x3139605e, 0x3139605e, 0x3139605e } },
+ { AR5K_PHY_WEAK_OFDM_LOW_THR,
+ { 0x050cb081, 0x050cb081, 0x050cb081 } },
+ { AR5K_PHY_RX_DELAY,
+ { 0x000007d0, 0x0000044c, 0x00000898 } },
+ { AR5K_PHY_FRAME_CTL_5211,
+ { 0xf7b81000, 0xf7b80d00, 0xf7b81000 } },
+ { AR5K_PHY_CCKTXCTL,
+ { 0x00000000, 0x00000000, 0x00000000 } },
+ { AR5K_PHY_CCK_CROSSCORR,
+ { 0xd6be6788, 0xd03e6788, 0xd03e6788 } },
+ { AR5K_PHY_GAIN_2GHZ,
+ { 0x002ec1e0, 0x002ac120, 0x002ac120 } },
+ { AR5K_PHY_CCK_RX_CTL_4,
+ { 0x1883800a, 0x1863800a, 0x1883800a } },
+ { 0xa300,
+ { 0x18010000, 0x18010000, 0x18010000 } },
+ { 0xa304,
+ { 0x30032602, 0x30032602, 0x30032602 } },
+ { 0xa308,
+ { 0x48073e06, 0x48073e06, 0x48073e06 } },
+ { 0xa30c,
+ { 0x560b4c0a, 0x560b4c0a, 0x560b4c0a } },
+ { 0xa310,
+ { 0x641a600f, 0x641a600f, 0x641a600f } },
+ { 0xa314,
+ { 0x784f6e1b, 0x784f6e1b, 0x784f6e1b } },
+ { 0xa318,
+ { 0x868f7c5a, 0x868f7c5a, 0x868f7c5a } },
+ { 0xa31c,
+ { 0x90cf865b, 0x8ecf865b, 0x8ecf865b } },
+ { 0xa320,
+ { 0x9d4f970f, 0x9b4f970f, 0x9b4f970f } },
+ { 0xa324,
+ { 0xa7cfa38f, 0xa3cf9f8f, 0xa3cf9f8f } },
+ { 0xa328,
+ { 0xb55faf1f, 0xb35faf1f, 0xb35faf1f } },
+ { 0xa32c,
+ { 0xbddfb99f, 0xbbdfb99f, 0xbbdfb99f } },
+ { 0xa330,
+ { 0xcb7fc53f, 0xcb7fc73f, 0xcb7fc73f } },
+ { 0xa334,
+ { 0xd5ffd1bf, 0xd3ffd1bf, 0xd3ffd1bf } },
+};
+
+static const struct ath5k_ini rf5413_ini_common_end[] = {
+ { AR5K_DCU_FP, 0x000003e0 },
+ { AR5K_5414_CBCFG, 0x00000010 },
+ { AR5K_SEQ_MASK, 0x0000000f },
+ { 0x809c, 0x00000000 },
+ { 0x80a0, 0x00000000 },
+ { AR5K_MIC_QOS_CTL, 0x00000000 },
+ { AR5K_MIC_QOS_SEL, 0x00000000 },
+ { AR5K_MISC_MODE, 0x00000000 },
+ { AR5K_OFDM_FIL_CNT, 0x00000000 },
+ { AR5K_CCK_FIL_CNT, 0x00000000 },
+ { AR5K_PHYERR_CNT1, 0x00000000 },
+ { AR5K_PHYERR_CNT1_MASK, 0x00000000 },
+ { AR5K_PHYERR_CNT2, 0x00000000 },
+ { AR5K_PHYERR_CNT2_MASK, 0x00000000 },
+ { AR5K_TSF_THRES, 0x00000000 },
+ { 0x8140, 0x800003f9 },
+ { 0x8144, 0x00000000 },
+ { AR5K_PHY_AGC, 0x00000000 },
+ { AR5K_PHY_ADC_CTL, 0x0000a000 },
+ { 0x983c, 0x00200400 },
+ { AR5K_PHY_GAIN_OFFSET, 0x1284233c },
+ { AR5K_PHY_SCR, 0x0000001f },
+ { AR5K_PHY_SLMT, 0x00000080 },
+ { AR5K_PHY_SCAL, 0x0000000e },
+ { 0x9958, 0x00081fff },
+ { AR5K_PHY_TIMING_7, 0x00000000 },
+ { AR5K_PHY_TIMING_8, 0x02800000 },
+ { AR5K_PHY_TIMING_11, 0x00000000 },
+ { AR5K_PHY_HEAVY_CLIP_ENABLE, 0x00000000 },
+ { 0x99e4, 0xaaaaaaaa },
+ { 0x99e8, 0x3c466478 },
+ { 0x99ec, 0x000000aa },
+ { AR5K_PHY_SCLOCK, 0x0000000c },
+ { AR5K_PHY_SDELAY, 0x000000ff },
+ { AR5K_PHY_SPENDING, 0x00000014 },
+ { AR5K_PHY_DAG_CCK_CTL, 0x000009b5 },
+ { 0xa23c, 0x93c889af },
+ { AR5K_PHY_FAST_ADC, 0x00000001 },
+ { 0xa250, 0x0000a000 },
+ { AR5K_PHY_BLUETOOTH, 0x00000000 },
+ { AR5K_PHY_TPC_RG1, 0x0cc75380 },
+ { 0xa25c, 0x0f0f0f01 },
+ { 0xa260, 0x5f690f01 },
+ { 0xa264, 0x00418a11 },
+ { 0xa268, 0x00000000 },
+ { AR5K_PHY_TPC_RG5, 0x0c30c16a },
+ { 0xa270, 0x00820820 },
+ { 0xa274, 0x081b7caa },
+ { 0xa278, 0x1ce739ce },
+ { 0xa27c, 0x051701ce },
+ { 0xa338, 0x00000000 },
+ { 0xa33c, 0x00000000 },
+ { 0xa340, 0x00000000 },
+ { 0xa344, 0x00000000 },
+ { 0xa348, 0x3fffffff },
+ { 0xa34c, 0x3fffffff },
+ { 0xa350, 0x3fffffff },
+ { 0xa354, 0x0003ffff },
+ { 0xa358, 0x79a8aa1f },
+ { 0xa35c, 0x066c420f },
+ { 0xa360, 0x0f282207 },
+ { 0xa364, 0x17601685 },
+ { 0xa368, 0x1f801104 },
+ { 0xa36c, 0x37a00c03 },
+ { 0xa370, 0x3fc40883 },
+ { 0xa374, 0x57c00803 },
+ { 0xa378, 0x5fd80682 },
+ { 0xa37c, 0x7fe00482 },
+ { 0xa380, 0x7f3c7bba },
+ { 0xa384, 0xf3307ff0 },
+};
+
+/* Initial mode-specific settings for RF2413/2414
+ * (Written after ar5212_ini) */
+/* XXX: a mode ? */
+static const struct ath5k_ini_mode rf2413_ini_mode_end[] = {
+ { AR5K_TXCFG,
+ /* A/XR B G */
+ { 0x00000015, 0x00000015, 0x00000015 } },
+ { AR5K_USEC_5211,
+ { 0x128d93a7, 0x04e01395, 0x12e013ab } },
+ { AR5K_PHY_RF_CTL3,
+ { 0x0a020001, 0x05020000, 0x0a020001 } },
+ { AR5K_PHY_RF_CTL4,
+ { 0x00000e00, 0x00000e00, 0x00000e00 } },
+ { AR5K_PHY_PA_CTL,
+ { 0x00000002, 0x0000000a, 0x0000000a } },
+ { AR5K_PHY_GAIN,
+ { 0x0018da6d, 0x001a6a64, 0x001a6a64 } },
+ { AR5K_PHY_DESIRED_SIZE,
+ { 0x0de8b4e0, 0x0de8b0da, 0x0c98b0da } },
+ { AR5K_PHY_SIG,
+ { 0x7e800d2e, 0x7ee80d2e, 0x7ec80d2e } },
+ { AR5K_PHY_AGCCOARSE,
+ { 0x3137665e, 0x3137665e, 0x3139605e } },
+ { AR5K_PHY_WEAK_OFDM_LOW_THR,
+ { 0x050cb081, 0x050cb081, 0x050cb081 } },
+ { AR5K_PHY_RX_DELAY,
+ { 0x000007d0, 0x0000044c, 0x00000898 } },
+ { AR5K_PHY_FRAME_CTL_5211,
+ { 0xf7b81000, 0xf7b80d00, 0xf7b81000 } },
+ { AR5K_PHY_CCKTXCTL,
+ { 0x00000000, 0x00000000, 0x00000000 } },
+ { AR5K_PHY_CCK_CROSSCORR,
+ { 0xd6be6788, 0xd03e6788, 0xd03e6788 } },
+ { AR5K_PHY_GAIN_2GHZ,
+ { 0x002c0140, 0x0042c140, 0x0042c140 } },
+ { AR5K_PHY_CCK_RX_CTL_4,
+ { 0x1883800a, 0x1863800a, 0x1883800a } },
+};
+
+static const struct ath5k_ini rf2413_ini_common_end[] = {
+ { AR5K_DCU_FP, 0x000003e0 },
+ { AR5K_SEQ_MASK, 0x0000000f },
+ { AR5K_MIC_QOS_CTL, 0x00000000 },
+ { AR5K_MIC_QOS_SEL, 0x00000000 },
+ { AR5K_MISC_MODE, 0x00000000 },
+ { AR5K_OFDM_FIL_CNT, 0x00000000 },
+ { AR5K_CCK_FIL_CNT, 0x00000000 },
+ { AR5K_PHYERR_CNT1, 0x00000000 },
+ { AR5K_PHYERR_CNT1_MASK, 0x00000000 },
+ { AR5K_PHYERR_CNT2, 0x00000000 },
+ { AR5K_PHYERR_CNT2_MASK, 0x00000000 },
+ { AR5K_TSF_THRES, 0x00000000 },
+ { 0x8140, 0x800000a8 },
+ { 0x8144, 0x00000000 },
+ { AR5K_PHY_AGC, 0x00000000 },
+ { AR5K_PHY_ADC_CTL, 0x0000a000 },
+ { 0x983c, 0x00200400 },
+ { AR5K_PHY_GAIN_OFFSET, 0x1284233c },
+ { AR5K_PHY_SCR, 0x0000001f },
+ { AR5K_PHY_SLMT, 0x00000080 },
+ { AR5K_PHY_SCAL, 0x0000000e },
+ { 0x9958, 0x000000ff },
+ { AR5K_PHY_TIMING_7, 0x00000000 },
+ { AR5K_PHY_TIMING_8, 0x02800000 },
+ { AR5K_PHY_TIMING_11, 0x00000000 },
+ { AR5K_PHY_HEAVY_CLIP_ENABLE, 0x00000000 },
+ { 0x99e4, 0xaaaaaaaa },
+ { 0x99e8, 0x3c466478 },
+ { 0x99ec, 0x000000aa },
+ { AR5K_PHY_SCLOCK, 0x0000000c },
+ { AR5K_PHY_SDELAY, 0x000000ff },
+ { AR5K_PHY_SPENDING, 0x00000014 },
+ { AR5K_PHY_DAG_CCK_CTL, 0x000009b5 },
+ { 0xa23c, 0x93c889af },
+ { AR5K_PHY_FAST_ADC, 0x00000001 },
+ { 0xa250, 0x0000a000 },
+ { AR5K_PHY_BLUETOOTH, 0x00000000 },
+ { AR5K_PHY_TPC_RG1, 0x0cc75380 },
+ { 0xa25c, 0x0f0f0f01 },
+ { 0xa260, 0x5f690f01 },
+ { 0xa264, 0x00418a11 },
+ { 0xa268, 0x00000000 },
+ { AR5K_PHY_TPC_RG5, 0x0c30c16a },
+ { 0xa270, 0x00820820 },
+ { 0xa274, 0x001b7caa },
+ { 0xa278, 0x1ce739ce },
+ { 0xa27c, 0x051701ce },
+ { 0xa300, 0x18010000 },
+ { 0xa304, 0x30032602 },
+ { 0xa308, 0x48073e06 },
+ { 0xa30c, 0x560b4c0a },
+ { 0xa310, 0x641a600f },
+ { 0xa314, 0x784f6e1b },
+ { 0xa318, 0x868f7c5a },
+ { 0xa31c, 0x8ecf865b },
+ { 0xa320, 0x9d4f970f },
+ { 0xa324, 0xa5cfa18f },
+ { 0xa328, 0xb55faf1f },
+ { 0xa32c, 0xbddfb99f },
+ { 0xa330, 0xcd7fc73f },
+ { 0xa334, 0xd5ffd1bf },
+ { 0xa338, 0x00000000 },
+ { 0xa33c, 0x00000000 },
+ { 0xa340, 0x00000000 },
+ { 0xa344, 0x00000000 },
+ { 0xa348, 0x3fffffff },
+ { 0xa34c, 0x3fffffff },
+ { 0xa350, 0x3fffffff },
+ { 0xa354, 0x0003ffff },
+ { 0xa358, 0x79a8aa1f },
+ { 0xa35c, 0x066c420f },
+ { 0xa360, 0x0f282207 },
+ { 0xa364, 0x17601685 },
+ { 0xa368, 0x1f801104 },
+ { 0xa36c, 0x37a00c03 },
+ { 0xa370, 0x3fc40883 },
+ { 0xa374, 0x57c00803 },
+ { 0xa378, 0x5fd80682 },
+ { 0xa37c, 0x7fe00482 },
+ { 0xa380, 0x7f3c7bba },
+ { 0xa384, 0xf3307ff0 },
+};
+
+/* Initial mode-specific settings for RF2425
+ * (Written after ar5212_ini) */
+/* XXX: a mode ? */
+static const struct ath5k_ini_mode rf2425_ini_mode_end[] = {
+ { AR5K_TXCFG,
+ /* A/XR B G */
+ { 0x00000015, 0x00000015, 0x00000015 } },
+ { AR5K_USEC_5211,
+ { 0x128d93a7, 0x04e01395, 0x12e013ab } },
+ { AR5K_PHY_RF_CTL3,
+ { 0x0a020001, 0x05020100, 0x0a020001 } },
+ { AR5K_PHY_RF_CTL4,
+ { 0x00000e0e, 0x00000e0e, 0x00000e0e } },
+ { AR5K_PHY_PA_CTL,
+ { 0x00000003, 0x0000000b, 0x0000000b } },
+ { AR5K_PHY_SETTLING,
+ { 0x1372161c, 0x13721722, 0x13721422 } },
+ { AR5K_PHY_GAIN,
+ { 0x0018fa61, 0x00199a65, 0x00199a65 } },
+ { AR5K_PHY_DESIRED_SIZE,
+ { 0x0c98b4e0, 0x0c98b0da, 0x0c98b0da } },
+ { AR5K_PHY_SIG,
+ { 0x7ec80d2e, 0x7ec80d2e, 0x7ec80d2e } },
+ { AR5K_PHY_AGCCOARSE,
+ { 0x3139605e, 0x3139605e, 0x3139605e } },
+ { AR5K_PHY_WEAK_OFDM_LOW_THR,
+ { 0x050cb081, 0x050cb081, 0x050cb081 } },
+ { AR5K_PHY_RX_DELAY,
+ { 0x000007d0, 0x0000044c, 0x00000898 } },
+ { AR5K_PHY_FRAME_CTL_5211,
+ { 0xf7b81000, 0xf7b80d00, 0xf7b81000 } },
+ { AR5K_PHY_CCKTXCTL,
+ { 0x00000000, 0x00000000, 0x00000000 } },
+ { AR5K_PHY_CCK_CROSSCORR,
+ { 0xd6be6788, 0xd03e6788, 0xd03e6788 } },
+ { AR5K_PHY_GAIN_2GHZ,
+ { 0x00000140, 0x0052c140, 0x0052c140 } },
+ { AR5K_PHY_CCK_RX_CTL_4,
+ { 0x1883800a, 0x1863800a, 0x1883800a } },
+ { 0xa324,
+ { 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf } },
+ { 0xa328,
+ { 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf } },
+ { 0xa32c,
+ { 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf } },
+ { 0xa330,
+ { 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf } },
+ { 0xa334,
+ { 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf } },
+};
+
+static const struct ath5k_ini rf2425_ini_common_end[] = {
+ { AR5K_DCU_FP, 0x000003e0 },
+ { AR5K_SEQ_MASK, 0x0000000f },
+ { 0x809c, 0x00000000 },
+ { 0x80a0, 0x00000000 },
+ { AR5K_MIC_QOS_CTL, 0x00000000 },
+ { AR5K_MIC_QOS_SEL, 0x00000000 },
+ { AR5K_MISC_MODE, 0x00000000 },
+ { AR5K_OFDM_FIL_CNT, 0x00000000 },
+ { AR5K_CCK_FIL_CNT, 0x00000000 },
+ { AR5K_PHYERR_CNT1, 0x00000000 },
+ { AR5K_PHYERR_CNT1_MASK, 0x00000000 },
+ { AR5K_PHYERR_CNT2, 0x00000000 },
+ { AR5K_PHYERR_CNT2_MASK, 0x00000000 },
+ { AR5K_TSF_THRES, 0x00000000 },
+ { 0x8140, 0x800003f9 },
+ { 0x8144, 0x00000000 },
+ { AR5K_PHY_AGC, 0x00000000 },
+ { AR5K_PHY_ADC_CTL, 0x0000a000 },
+ { 0x983c, 0x00200400 },
+ { AR5K_PHY_GAIN_OFFSET, 0x1284233c },
+ { AR5K_PHY_SCR, 0x0000001f },
+ { AR5K_PHY_SLMT, 0x00000080 },
+ { AR5K_PHY_SCAL, 0x0000000e },
+ { 0x9958, 0x00081fff },
+ { AR5K_PHY_TIMING_7, 0x00000000 },
+ { AR5K_PHY_TIMING_8, 0x02800000 },
+ { AR5K_PHY_TIMING_11, 0x00000000 },
+ { 0x99dc, 0xfebadbe8 },
+ { AR5K_PHY_HEAVY_CLIP_ENABLE, 0x00000000 },
+ { 0x99e4, 0xaaaaaaaa },
+ { 0x99e8, 0x3c466478 },
+ { 0x99ec, 0x000000aa },
+ { AR5K_PHY_SCLOCK, 0x0000000c },
+ { AR5K_PHY_SDELAY, 0x000000ff },
+ { AR5K_PHY_SPENDING, 0x00000014 },
+ { AR5K_PHY_DAG_CCK_CTL, 0x000009b5 },
+ { AR5K_PHY_TXPOWER_RATE3, 0x20202020 },
+ { AR5K_PHY_TXPOWER_RATE4, 0x20202020 },
+ { 0xa23c, 0x93c889af },
+ { AR5K_PHY_FAST_ADC, 0x00000001 },
+ { 0xa250, 0x0000a000 },
+ { AR5K_PHY_BLUETOOTH, 0x00000000 },
+ { AR5K_PHY_TPC_RG1, 0x0cc75380 },
+ { 0xa25c, 0x0f0f0f01 },
+ { 0xa260, 0x5f690f01 },
+ { 0xa264, 0x00418a11 },
+ { 0xa268, 0x00000000 },
+ { AR5K_PHY_TPC_RG5, 0x0c30c166 },
+ { 0xa270, 0x00820820 },
+ { 0xa274, 0x081a3caa },
+ { 0xa278, 0x1ce739ce },
+ { 0xa27c, 0x051701ce },
+ { 0xa300, 0x16010000 },
+ { 0xa304, 0x2c032402 },
+ { 0xa308, 0x48433e42 },
+ { 0xa30c, 0x5a0f500b },
+ { 0xa310, 0x6c4b624a },
+ { 0xa314, 0x7e8b748a },
+ { 0xa318, 0x96cf8ccb },
+ { 0xa31c, 0xa34f9d0f },
+ { 0xa320, 0xa7cfa58f },
+ { 0xa348, 0x3fffffff },
+ { 0xa34c, 0x3fffffff },
+ { 0xa350, 0x3fffffff },
+ { 0xa354, 0x0003ffff },
+ { 0xa358, 0x79a8aa1f },
+ { 0xa35c, 0x066c420f },
+ { 0xa360, 0x0f282207 },
+ { 0xa364, 0x17601685 },
+ { 0xa368, 0x1f801104 },
+ { 0xa36c, 0x37a00c03 },
+ { 0xa370, 0x3fc40883 },
+ { 0xa374, 0x57c00803 },
+ { 0xa378, 0x5fd80682 },
+ { 0xa37c, 0x7fe00482 },
+ { 0xa380, 0x7f3c7bba },
+ { 0xa384, 0xf3307ff0 },
+};
+
+/*
+ * Initial BaseBand Gain settings for RF5111/5112 (AR5210 comes with
+ * RF5110 only so initial BB Gain settings are included in AR5K_AR5210_INI)
+ */
+
+/* RF5111 Initial BaseBand Gain settings */
+static const struct ath5k_ini rf5111_ini_bbgain[] = {
+ { AR5K_BB_GAIN(0), 0x00000000 },
+ { AR5K_BB_GAIN(1), 0x00000020 },
+ { AR5K_BB_GAIN(2), 0x00000010 },
+ { AR5K_BB_GAIN(3), 0x00000030 },
+ { AR5K_BB_GAIN(4), 0x00000008 },
+ { AR5K_BB_GAIN(5), 0x00000028 },
+ { AR5K_BB_GAIN(6), 0x00000004 },
+ { AR5K_BB_GAIN(7), 0x00000024 },
+ { AR5K_BB_GAIN(8), 0x00000014 },
+ { AR5K_BB_GAIN(9), 0x00000034 },
+ { AR5K_BB_GAIN(10), 0x0000000c },
+ { AR5K_BB_GAIN(11), 0x0000002c },
+ { AR5K_BB_GAIN(12), 0x00000002 },
+ { AR5K_BB_GAIN(13), 0x00000022 },
+ { AR5K_BB_GAIN(14), 0x00000012 },
+ { AR5K_BB_GAIN(15), 0x00000032 },
+ { AR5K_BB_GAIN(16), 0x0000000a },
+ { AR5K_BB_GAIN(17), 0x0000002a },
+ { AR5K_BB_GAIN(18), 0x00000006 },
+ { AR5K_BB_GAIN(19), 0x00000026 },
+ { AR5K_BB_GAIN(20), 0x00000016 },
+ { AR5K_BB_GAIN(21), 0x00000036 },
+ { AR5K_BB_GAIN(22), 0x0000000e },
+ { AR5K_BB_GAIN(23), 0x0000002e },
+ { AR5K_BB_GAIN(24), 0x00000001 },
+ { AR5K_BB_GAIN(25), 0x00000021 },
+ { AR5K_BB_GAIN(26), 0x00000011 },
+ { AR5K_BB_GAIN(27), 0x00000031 },
+ { AR5K_BB_GAIN(28), 0x00000009 },
+ { AR5K_BB_GAIN(29), 0x00000029 },
+ { AR5K_BB_GAIN(30), 0x00000005 },
+ { AR5K_BB_GAIN(31), 0x00000025 },
+ { AR5K_BB_GAIN(32), 0x00000015 },
+ { AR5K_BB_GAIN(33), 0x00000035 },
+ { AR5K_BB_GAIN(34), 0x0000000d },
+ { AR5K_BB_GAIN(35), 0x0000002d },
+ { AR5K_BB_GAIN(36), 0x00000003 },
+ { AR5K_BB_GAIN(37), 0x00000023 },
+ { AR5K_BB_GAIN(38), 0x00000013 },
+ { AR5K_BB_GAIN(39), 0x00000033 },
+ { AR5K_BB_GAIN(40), 0x0000000b },
+ { AR5K_BB_GAIN(41), 0x0000002b },
+ { AR5K_BB_GAIN(42), 0x0000002b },
+ { AR5K_BB_GAIN(43), 0x0000002b },
+ { AR5K_BB_GAIN(44), 0x0000002b },
+ { AR5K_BB_GAIN(45), 0x0000002b },
+ { AR5K_BB_GAIN(46), 0x0000002b },
+ { AR5K_BB_GAIN(47), 0x0000002b },
+ { AR5K_BB_GAIN(48), 0x0000002b },
+ { AR5K_BB_GAIN(49), 0x0000002b },
+ { AR5K_BB_GAIN(50), 0x0000002b },
+ { AR5K_BB_GAIN(51), 0x0000002b },
+ { AR5K_BB_GAIN(52), 0x0000002b },
+ { AR5K_BB_GAIN(53), 0x0000002b },
+ { AR5K_BB_GAIN(54), 0x0000002b },
+ { AR5K_BB_GAIN(55), 0x0000002b },
+ { AR5K_BB_GAIN(56), 0x0000002b },
+ { AR5K_BB_GAIN(57), 0x0000002b },
+ { AR5K_BB_GAIN(58), 0x0000002b },
+ { AR5K_BB_GAIN(59), 0x0000002b },
+ { AR5K_BB_GAIN(60), 0x0000002b },
+ { AR5K_BB_GAIN(61), 0x0000002b },
+ { AR5K_BB_GAIN(62), 0x00000002 },
+ { AR5K_BB_GAIN(63), 0x00000016 },
+};
+
+/* RF5112 Initial BaseBand Gain settings (Same for RF5413/5414+) */
+static const struct ath5k_ini rf5112_ini_bbgain[] = {
+ { AR5K_BB_GAIN(0), 0x00000000 },
+ { AR5K_BB_GAIN(1), 0x00000001 },
+ { AR5K_BB_GAIN(2), 0x00000002 },
+ { AR5K_BB_GAIN(3), 0x00000003 },
+ { AR5K_BB_GAIN(4), 0x00000004 },
+ { AR5K_BB_GAIN(5), 0x00000005 },
+ { AR5K_BB_GAIN(6), 0x00000008 },
+ { AR5K_BB_GAIN(7), 0x00000009 },
+ { AR5K_BB_GAIN(8), 0x0000000a },
+ { AR5K_BB_GAIN(9), 0x0000000b },
+ { AR5K_BB_GAIN(10), 0x0000000c },
+ { AR5K_BB_GAIN(11), 0x0000000d },
+ { AR5K_BB_GAIN(12), 0x00000010 },
+ { AR5K_BB_GAIN(13), 0x00000011 },
+ { AR5K_BB_GAIN(14), 0x00000012 },
+ { AR5K_BB_GAIN(15), 0x00000013 },
+ { AR5K_BB_GAIN(16), 0x00000014 },
+ { AR5K_BB_GAIN(17), 0x00000015 },
+ { AR5K_BB_GAIN(18), 0x00000018 },
+ { AR5K_BB_GAIN(19), 0x00000019 },
+ { AR5K_BB_GAIN(20), 0x0000001a },
+ { AR5K_BB_GAIN(21), 0x0000001b },
+ { AR5K_BB_GAIN(22), 0x0000001c },
+ { AR5K_BB_GAIN(23), 0x0000001d },
+ { AR5K_BB_GAIN(24), 0x00000020 },
+ { AR5K_BB_GAIN(25), 0x00000021 },
+ { AR5K_BB_GAIN(26), 0x00000022 },
+ { AR5K_BB_GAIN(27), 0x00000023 },
+ { AR5K_BB_GAIN(28), 0x00000024 },
+ { AR5K_BB_GAIN(29), 0x00000025 },
+ { AR5K_BB_GAIN(30), 0x00000028 },
+ { AR5K_BB_GAIN(31), 0x00000029 },
+ { AR5K_BB_GAIN(32), 0x0000002a },
+ { AR5K_BB_GAIN(33), 0x0000002b },
+ { AR5K_BB_GAIN(34), 0x0000002c },
+ { AR5K_BB_GAIN(35), 0x0000002d },
+ { AR5K_BB_GAIN(36), 0x00000030 },
+ { AR5K_BB_GAIN(37), 0x00000031 },
+ { AR5K_BB_GAIN(38), 0x00000032 },
+ { AR5K_BB_GAIN(39), 0x00000033 },
+ { AR5K_BB_GAIN(40), 0x00000034 },
+ { AR5K_BB_GAIN(41), 0x00000035 },
+ { AR5K_BB_GAIN(42), 0x00000035 },
+ { AR5K_BB_GAIN(43), 0x00000035 },
+ { AR5K_BB_GAIN(44), 0x00000035 },
+ { AR5K_BB_GAIN(45), 0x00000035 },
+ { AR5K_BB_GAIN(46), 0x00000035 },
+ { AR5K_BB_GAIN(47), 0x00000035 },
+ { AR5K_BB_GAIN(48), 0x00000035 },
+ { AR5K_BB_GAIN(49), 0x00000035 },
+ { AR5K_BB_GAIN(50), 0x00000035 },
+ { AR5K_BB_GAIN(51), 0x00000035 },
+ { AR5K_BB_GAIN(52), 0x00000035 },
+ { AR5K_BB_GAIN(53), 0x00000035 },
+ { AR5K_BB_GAIN(54), 0x00000035 },
+ { AR5K_BB_GAIN(55), 0x00000035 },
+ { AR5K_BB_GAIN(56), 0x00000035 },
+ { AR5K_BB_GAIN(57), 0x00000035 },
+ { AR5K_BB_GAIN(58), 0x00000035 },
+ { AR5K_BB_GAIN(59), 0x00000035 },
+ { AR5K_BB_GAIN(60), 0x00000035 },
+ { AR5K_BB_GAIN(61), 0x00000035 },
+ { AR5K_BB_GAIN(62), 0x00000010 },
+ { AR5K_BB_GAIN(63), 0x0000001a },
+};
+
+
+/**
+ * ath5k_hw_ini_registers() - Write initial register dump common for all modes
+ * @ah: The &struct ath5k_hw
+ * @size: Dump size
+ * @ini_regs: The array of &struct ath5k_ini
+ * @skip_pcu: Skip PCU registers
+ */
+static void
+ath5k_hw_ini_registers(struct ath5k_hw *ah, unsigned int size,
+ const struct ath5k_ini *ini_regs, bool skip_pcu)
+{
+ unsigned int i;
+
+ /* Write initial registers */
+ for (i = 0; i < size; i++) {
+ /* Skip PCU registers if
+ * requested */
+ if (skip_pcu &&
+ ini_regs[i].ini_register >= AR5K_PCU_MIN &&
+ ini_regs[i].ini_register <= AR5K_PCU_MAX)
+ continue;
+
+ switch (ini_regs[i].ini_mode) {
+ case AR5K_INI_READ:
+ /* Cleared on read */
+ ath5k_hw_reg_read(ah, ini_regs[i].ini_register);
+ break;
+ case AR5K_INI_WRITE:
+ default:
+ AR5K_REG_WAIT(i);
+ ath5k_hw_reg_write(ah, ini_regs[i].ini_value,
+ ini_regs[i].ini_register);
+ }
+ }
+}
+
+/**
+ * ath5k_hw_ini_mode_registers() - Write initial mode-specific register dump
+ * @ah: The &struct ath5k_hw
+ * @size: Dump size
+ * @ini_mode: The array of &struct ath5k_ini_mode
+ * @mode: One of enum ath5k_driver_mode
+ */
+static void
+ath5k_hw_ini_mode_registers(struct ath5k_hw *ah,
+ unsigned int size, const struct ath5k_ini_mode *ini_mode,
+ u8 mode)
+{
+ unsigned int i;
+
+ for (i = 0; i < size; i++) {
+ AR5K_REG_WAIT(i);
+ ath5k_hw_reg_write(ah, ini_mode[i].mode_value[mode],
+ (u32)ini_mode[i].mode_register);
+ }
+
+}
+
+/**
+ * ath5k_hw_write_initvals() - Write initial chip-specific register dump
+ * @ah: The &struct ath5k_hw
+ * @mode: One of enum ath5k_driver_mode
+ * @skip_pcu: Skip PCU registers
+ *
+ * Write initial chip-specific register dump, to get the chipset on a
+ * clean and ready-to-work state after warm reset.
+ */
+int
+ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool skip_pcu)
+{
+ /*
+ * Write initial register settings
+ */
+
+ /* For AR5212 and compatible */
+ if (ah->ah_version == AR5K_AR5212) {
+
+ /* First set of mode-specific settings */
+ ath5k_hw_ini_mode_registers(ah,
+ ARRAY_SIZE(ar5212_ini_mode_start),
+ ar5212_ini_mode_start, mode);
+
+ /*
+ * Write initial settings common for all modes
+ */
+ ath5k_hw_ini_registers(ah, ARRAY_SIZE(ar5212_ini_common_start),
+ ar5212_ini_common_start, skip_pcu);
+
+ /* Second set of mode-specific settings */
+ switch (ah->ah_radio) {
+ case AR5K_RF5111:
+
+ ath5k_hw_ini_mode_registers(ah,
+ ARRAY_SIZE(rf5111_ini_mode_end),
+ rf5111_ini_mode_end, mode);
+
+ ath5k_hw_ini_registers(ah,
+ ARRAY_SIZE(rf5111_ini_common_end),
+ rf5111_ini_common_end, skip_pcu);
+
+ /* Baseband gain table */
+ ath5k_hw_ini_registers(ah,
+ ARRAY_SIZE(rf5111_ini_bbgain),
+ rf5111_ini_bbgain, skip_pcu);
+
+ break;
+ case AR5K_RF5112:
+
+ ath5k_hw_ini_mode_registers(ah,
+ ARRAY_SIZE(rf5112_ini_mode_end),
+ rf5112_ini_mode_end, mode);
+
+ ath5k_hw_ini_registers(ah,
+ ARRAY_SIZE(rf5112_ini_common_end),
+ rf5112_ini_common_end, skip_pcu);
+
+ ath5k_hw_ini_registers(ah,
+ ARRAY_SIZE(rf5112_ini_bbgain),
+ rf5112_ini_bbgain, skip_pcu);
+
+ break;
+ case AR5K_RF5413:
+
+ ath5k_hw_ini_mode_registers(ah,
+ ARRAY_SIZE(rf5413_ini_mode_end),
+ rf5413_ini_mode_end, mode);
+
+ ath5k_hw_ini_registers(ah,
+ ARRAY_SIZE(rf5413_ini_common_end),
+ rf5413_ini_common_end, skip_pcu);
+
+ ath5k_hw_ini_registers(ah,
+ ARRAY_SIZE(rf5112_ini_bbgain),
+ rf5112_ini_bbgain, skip_pcu);
+
+ break;
+ case AR5K_RF2316:
+ case AR5K_RF2413:
+
+ ath5k_hw_ini_mode_registers(ah,
+ ARRAY_SIZE(rf2413_ini_mode_end),
+ rf2413_ini_mode_end, mode);
+
+ ath5k_hw_ini_registers(ah,
+ ARRAY_SIZE(rf2413_ini_common_end),
+ rf2413_ini_common_end, skip_pcu);
+
+ /* Override settings from rf2413_ini_common_end */
+ if (ah->ah_radio == AR5K_RF2316) {
+ ath5k_hw_reg_write(ah, 0x00004000,
+ AR5K_PHY_AGC);
+ ath5k_hw_reg_write(ah, 0x081b7caa,
+ 0xa274);
+ }
+
+ ath5k_hw_ini_registers(ah,
+ ARRAY_SIZE(rf5112_ini_bbgain),
+ rf5112_ini_bbgain, skip_pcu);
+ break;
+ case AR5K_RF2317:
+
+ ath5k_hw_ini_mode_registers(ah,
+ ARRAY_SIZE(rf2413_ini_mode_end),
+ rf2413_ini_mode_end, mode);
+
+ ath5k_hw_ini_registers(ah,
+ ARRAY_SIZE(rf2425_ini_common_end),
+ rf2425_ini_common_end, skip_pcu);
+
+ /* Override settings from rf2413_ini_mode_end */
+ ath5k_hw_reg_write(ah, 0x00180a65, AR5K_PHY_GAIN);
+
+ /* Override settings from rf2413_ini_common_end */
+ ath5k_hw_reg_write(ah, 0x00004000, AR5K_PHY_AGC);
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TPC_RG5,
+ AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP, 0xa);
+ ath5k_hw_reg_write(ah, 0x800000a8, 0x8140);
+ ath5k_hw_reg_write(ah, 0x000000ff, 0x9958);
+
+ ath5k_hw_ini_registers(ah,
+ ARRAY_SIZE(rf5112_ini_bbgain),
+ rf5112_ini_bbgain, skip_pcu);
+ break;
+ case AR5K_RF2425:
+
+ ath5k_hw_ini_mode_registers(ah,
+ ARRAY_SIZE(rf2425_ini_mode_end),
+ rf2425_ini_mode_end, mode);
+
+ ath5k_hw_ini_registers(ah,
+ ARRAY_SIZE(rf2425_ini_common_end),
+ rf2425_ini_common_end, skip_pcu);
+
+ ath5k_hw_ini_registers(ah,
+ ARRAY_SIZE(rf5112_ini_bbgain),
+ rf5112_ini_bbgain, skip_pcu);
+ break;
+ default:
+ return -EINVAL;
+
+ }
+
+ /* For AR5211 */
+ } else if (ah->ah_version == AR5K_AR5211) {
+
+ /* AR5K_MODE_11B */
+ if (mode > 2) {
+ ATH5K_ERR(ah, "unsupported channel mode: %d\n", mode);
+ return -EINVAL;
+ }
+
+ /* Mode-specific settings */
+ ath5k_hw_ini_mode_registers(ah, ARRAY_SIZE(ar5211_ini_mode),
+ ar5211_ini_mode, mode);
+
+ /*
+ * Write initial settings common for all modes
+ */
+ ath5k_hw_ini_registers(ah, ARRAY_SIZE(ar5211_ini),
+ ar5211_ini, skip_pcu);
+
+ /* AR5211 only comes with 5111 */
+
+ /* Baseband gain table */
+ ath5k_hw_ini_registers(ah, ARRAY_SIZE(rf5111_ini_bbgain),
+ rf5111_ini_bbgain, skip_pcu);
+ /* For AR5210 (for mode settings check out ath5k_hw_reset_tx_queue) */
+ } else if (ah->ah_version == AR5K_AR5210) {
+ ath5k_hw_ini_registers(ah, ARRAY_SIZE(ar5210_ini),
+ ar5210_ini, skip_pcu);
+ }
+
+ return 0;
+}
diff --git a/drivers/net/wireless/ath/ath5k/led.c b/drivers/net/wireless/ath/ath5k/led.c
new file mode 100644
index 000000000..33e9928af
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/led.c
@@ -0,0 +1,205 @@
+/*
+ * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting
+ * Copyright (c) 2004-2005 Atheros Communications, Inc.
+ * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com>
+ * Copyright (c) 2009 Bob Copeland <me@bobcopeland.com>
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
+ * redistribution must be conditioned upon including a substantially
+ * similar Disclaimer requirement for further binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
+ * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
+ * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
+ * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ * THE POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/pci.h>
+#include "ath5k.h"
+
+#define ATH_SDEVICE(subv, subd) \
+ .vendor = PCI_ANY_ID, .device = PCI_ANY_ID, \
+ .subvendor = (subv), .subdevice = (subd)
+
+#define ATH_LED(pin, polarity) .driver_data = (((pin) << 8) | (polarity))
+#define ATH_PIN(data) ((data) >> 8)
+#define ATH_POLARITY(data) ((data) & 0xff)
+
+/* Devices we match on for LED config info (typically laptops) */
+static const struct pci_device_id ath5k_led_devices[] = {
+ /* AR5211 */
+ { PCI_VDEVICE(ATHEROS, PCI_DEVICE_ID_ATHEROS_AR5211), ATH_LED(0, 0) },
+ /* HP Compaq nc6xx, nc4000, nx6000 */
+ { ATH_SDEVICE(PCI_VENDOR_ID_COMPAQ, PCI_ANY_ID), ATH_LED(1, 1) },
+ /* Acer Aspire One A150 (maximlevitsky@gmail.com) */
+ { ATH_SDEVICE(PCI_VENDOR_ID_FOXCONN, 0xe008), ATH_LED(3, 0) },
+ /* Acer Aspire One AO531h AO751h (keng-yu.lin@canonical.com) */
+ { ATH_SDEVICE(PCI_VENDOR_ID_FOXCONN, 0xe00d), ATH_LED(3, 0) },
+ /* Acer Ferrari 5000 (russ.dill@gmail.com) */
+ { ATH_SDEVICE(PCI_VENDOR_ID_AMBIT, 0x0422), ATH_LED(1, 1) },
+ /* E-machines E510 (tuliom@gmail.com) */
+ { ATH_SDEVICE(PCI_VENDOR_ID_AMBIT, 0x0428), ATH_LED(3, 0) },
+ /* BenQ Joybook R55v (nowymarluk@wp.pl) */
+ { ATH_SDEVICE(PCI_VENDOR_ID_QMI, 0x0100), ATH_LED(1, 0) },
+ /* Acer Extensa 5620z (nekoreeve@gmail.com) */
+ { ATH_SDEVICE(PCI_VENDOR_ID_QMI, 0x0105), ATH_LED(3, 0) },
+ /* Fukato Datacask Jupiter 1014a (mrb74@gmx.at) */
+ { ATH_SDEVICE(PCI_VENDOR_ID_AZWAVE, 0x1026), ATH_LED(3, 0) },
+ /* IBM ThinkPad AR5BXB6 (legovini@spiro.fisica.unipd.it) */
+ { ATH_SDEVICE(PCI_VENDOR_ID_IBM, 0x058a), ATH_LED(1, 0) },
+ /* HP Compaq CQ60-206US (ddreggors@jumptv.com) */
+ { ATH_SDEVICE(PCI_VENDOR_ID_HP, 0x0137a), ATH_LED(3, 1) },
+ /* HP Compaq C700 (nitrousnrg@gmail.com) */
+ { ATH_SDEVICE(PCI_VENDOR_ID_HP, 0x0137b), ATH_LED(3, 0) },
+ /* LiteOn AR5BXB63 (magooz@salug.it) */
+ { ATH_SDEVICE(PCI_VENDOR_ID_ATHEROS, 0x3067), ATH_LED(3, 0) },
+ /* IBM-specific AR5212 (all others) */
+ { PCI_VDEVICE(ATHEROS, PCI_DEVICE_ID_ATHEROS_AR5212_IBM), ATH_LED(0, 0) },
+ /* Dell Vostro A860 (shahar@shahar-or.co.il) */
+ { ATH_SDEVICE(PCI_VENDOR_ID_QMI, 0x0112), ATH_LED(3, 0) },
+ { }
+};
+
+void ath5k_led_enable(struct ath5k_hw *ah)
+{
+ if (IS_ENABLED(CONFIG_MAC80211_LEDS) &&
+ test_bit(ATH_STAT_LEDSOFT, ah->status)) {
+ ath5k_hw_set_gpio_output(ah, ah->led_pin);
+ ath5k_led_off(ah);
+ }
+}
+
+static void ath5k_led_on(struct ath5k_hw *ah)
+{
+ if (!test_bit(ATH_STAT_LEDSOFT, ah->status))
+ return;
+ ath5k_hw_set_gpio(ah, ah->led_pin, ah->led_on);
+}
+
+void ath5k_led_off(struct ath5k_hw *ah)
+{
+ if (!IS_ENABLED(CONFIG_MAC80211_LEDS) ||
+ !test_bit(ATH_STAT_LEDSOFT, ah->status))
+ return;
+ ath5k_hw_set_gpio(ah, ah->led_pin, !ah->led_on);
+}
+
+static void
+ath5k_led_brightness_set(struct led_classdev *led_dev,
+ enum led_brightness brightness)
+{
+ struct ath5k_led *led = container_of(led_dev, struct ath5k_led,
+ led_dev);
+
+ if (brightness == LED_OFF)
+ ath5k_led_off(led->ah);
+ else
+ ath5k_led_on(led->ah);
+}
+
+static int
+ath5k_register_led(struct ath5k_hw *ah, struct ath5k_led *led,
+ const char *name, const char *trigger)
+{
+ int err;
+
+ led->ah = ah;
+ strncpy(led->name, name, sizeof(led->name));
+ led->name[sizeof(led->name)-1] = 0;
+ led->led_dev.name = led->name;
+ led->led_dev.default_trigger = trigger;
+ led->led_dev.brightness_set = ath5k_led_brightness_set;
+
+ err = led_classdev_register(ah->dev, &led->led_dev);
+ if (err) {
+ ATH5K_WARN(ah, "could not register LED %s\n", name);
+ led->ah = NULL;
+ }
+ return err;
+}
+
+static void
+ath5k_unregister_led(struct ath5k_led *led)
+{
+ if (!IS_ENABLED(CONFIG_MAC80211_LEDS) || !led->ah)
+ return;
+ led_classdev_unregister(&led->led_dev);
+ ath5k_led_off(led->ah);
+ led->ah = NULL;
+}
+
+void ath5k_unregister_leds(struct ath5k_hw *ah)
+{
+ ath5k_unregister_led(&ah->rx_led);
+ ath5k_unregister_led(&ah->tx_led);
+}
+
+int ath5k_init_leds(struct ath5k_hw *ah)
+{
+ int ret = 0;
+ struct ieee80211_hw *hw = ah->hw;
+#ifndef CONFIG_ATH5K_AHB
+ struct pci_dev *pdev = ah->pdev;
+#endif
+ char name[ATH5K_LED_MAX_NAME_LEN + 1];
+ const struct pci_device_id *match;
+
+ if (!IS_ENABLED(CONFIG_MAC80211_LEDS) || !ah->pdev)
+ return 0;
+
+#ifdef CONFIG_ATH5K_AHB
+ match = NULL;
+#else
+ match = pci_match_id(&ath5k_led_devices[0], pdev);
+#endif
+ if (match) {
+ __set_bit(ATH_STAT_LEDSOFT, ah->status);
+ ah->led_pin = ATH_PIN(match->driver_data);
+ ah->led_on = ATH_POLARITY(match->driver_data);
+ }
+
+ if (!test_bit(ATH_STAT_LEDSOFT, ah->status))
+ goto out;
+
+ ath5k_led_enable(ah);
+
+ snprintf(name, sizeof(name), "ath5k-%s::rx", wiphy_name(hw->wiphy));
+ ret = ath5k_register_led(ah, &ah->rx_led, name,
+ ieee80211_get_rx_led_name(hw));
+ if (ret)
+ goto out;
+
+ snprintf(name, sizeof(name), "ath5k-%s::tx", wiphy_name(hw->wiphy));
+ ret = ath5k_register_led(ah, &ah->tx_led, name,
+ ieee80211_get_tx_led_name(hw));
+out:
+ return ret;
+}
+
diff --git a/drivers/net/wireless/ath/ath5k/mac80211-ops.c b/drivers/net/wireless/ath/ath5k/mac80211-ops.c
new file mode 100644
index 000000000..ed5d2160a
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/mac80211-ops.c
@@ -0,0 +1,821 @@
+/*-
+ * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting
+ * Copyright (c) 2004-2005 Atheros Communications, Inc.
+ * Copyright (c) 2006 Devicescape Software, Inc.
+ * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com>
+ * Copyright (c) 2007 Luis R. Rodriguez <mcgrof@winlab.rutgers.edu>
+ * Copyright (c) 2010 Bruno Randolf <br1@einfach.org>
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
+ * redistribution must be conditioned upon including a substantially
+ * similar Disclaimer requirement for further binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
+ * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
+ * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
+ * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ * THE POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <net/mac80211.h>
+#include <asm/unaligned.h>
+
+#include "ath5k.h"
+#include "base.h"
+#include "reg.h"
+
+/********************\
+* Mac80211 functions *
+\********************/
+
+static void
+ath5k_tx(struct ieee80211_hw *hw, struct ieee80211_tx_control *control,
+ struct sk_buff *skb)
+{
+ struct ath5k_hw *ah = hw->priv;
+ u16 qnum = skb_get_queue_mapping(skb);
+
+ if (WARN_ON(qnum >= ah->ah_capabilities.cap_queues.q_tx_num)) {
+ ieee80211_free_txskb(hw, skb);
+ return;
+ }
+
+ ath5k_tx_queue(hw, skb, &ah->txqs[qnum], control);
+}
+
+
+static int
+ath5k_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
+{
+ struct ath5k_hw *ah = hw->priv;
+ int ret;
+ struct ath5k_vif *avf = (void *)vif->drv_priv;
+
+ mutex_lock(&ah->lock);
+
+ if ((vif->type == NL80211_IFTYPE_AP ||
+ vif->type == NL80211_IFTYPE_ADHOC)
+ && (ah->num_ap_vifs + ah->num_adhoc_vifs) >= ATH_BCBUF) {
+ ret = -ELNRNG;
+ goto end;
+ }
+
+ /* Don't allow other interfaces if one ad-hoc is configured.
+ * TODO: Fix the problems with ad-hoc and multiple other interfaces.
+ * We would need to operate the HW in ad-hoc mode to allow TSF updates
+ * for the IBSS, but this breaks with additional AP or STA interfaces
+ * at the moment. */
+ if (ah->num_adhoc_vifs ||
+ (ah->nvifs && vif->type == NL80211_IFTYPE_ADHOC)) {
+ ATH5K_ERR(ah, "Only one single ad-hoc interface is allowed.\n");
+ ret = -ELNRNG;
+ goto end;
+ }
+
+ switch (vif->type) {
+ case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_STATION:
+ case NL80211_IFTYPE_ADHOC:
+ case NL80211_IFTYPE_MESH_POINT:
+ avf->opmode = vif->type;
+ break;
+ default:
+ ret = -EOPNOTSUPP;
+ goto end;
+ }
+
+ ah->nvifs++;
+ ATH5K_DBG(ah, ATH5K_DEBUG_MODE, "add interface mode %d\n", avf->opmode);
+
+ /* Assign the vap/adhoc to a beacon xmit slot. */
+ if ((avf->opmode == NL80211_IFTYPE_AP) ||
+ (avf->opmode == NL80211_IFTYPE_ADHOC) ||
+ (avf->opmode == NL80211_IFTYPE_MESH_POINT)) {
+ int slot;
+
+ WARN_ON(list_empty(&ah->bcbuf));
+ avf->bbuf = list_first_entry(&ah->bcbuf, struct ath5k_buf,
+ list);
+ list_del(&avf->bbuf->list);
+
+ avf->bslot = 0;
+ for (slot = 0; slot < ATH_BCBUF; slot++) {
+ if (!ah->bslot[slot]) {
+ avf->bslot = slot;
+ break;
+ }
+ }
+ BUG_ON(ah->bslot[avf->bslot] != NULL);
+ ah->bslot[avf->bslot] = vif;
+ if (avf->opmode == NL80211_IFTYPE_AP)
+ ah->num_ap_vifs++;
+ else if (avf->opmode == NL80211_IFTYPE_ADHOC)
+ ah->num_adhoc_vifs++;
+ else if (avf->opmode == NL80211_IFTYPE_MESH_POINT)
+ ah->num_mesh_vifs++;
+ }
+
+ /* Any MAC address is fine, all others are included through the
+ * filter.
+ */
+ ath5k_hw_set_lladdr(ah, vif->addr);
+
+ ath5k_update_bssid_mask_and_opmode(ah, vif);
+ ret = 0;
+end:
+ mutex_unlock(&ah->lock);
+ return ret;
+}
+
+
+static void
+ath5k_remove_interface(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif)
+{
+ struct ath5k_hw *ah = hw->priv;
+ struct ath5k_vif *avf = (void *)vif->drv_priv;
+ unsigned int i;
+
+ mutex_lock(&ah->lock);
+ ah->nvifs--;
+
+ if (avf->bbuf) {
+ ath5k_txbuf_free_skb(ah, avf->bbuf);
+ list_add_tail(&avf->bbuf->list, &ah->bcbuf);
+ for (i = 0; i < ATH_BCBUF; i++) {
+ if (ah->bslot[i] == vif) {
+ ah->bslot[i] = NULL;
+ break;
+ }
+ }
+ avf->bbuf = NULL;
+ }
+ if (avf->opmode == NL80211_IFTYPE_AP)
+ ah->num_ap_vifs--;
+ else if (avf->opmode == NL80211_IFTYPE_ADHOC)
+ ah->num_adhoc_vifs--;
+ else if (avf->opmode == NL80211_IFTYPE_MESH_POINT)
+ ah->num_mesh_vifs--;
+
+ ath5k_update_bssid_mask_and_opmode(ah, NULL);
+ mutex_unlock(&ah->lock);
+}
+
+
+/*
+ * TODO: Phy disable/diversity etc
+ */
+static int
+ath5k_config(struct ieee80211_hw *hw, u32 changed)
+{
+ struct ath5k_hw *ah = hw->priv;
+ struct ieee80211_conf *conf = &hw->conf;
+ int ret = 0;
+ int i;
+
+ mutex_lock(&ah->lock);
+
+ if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
+ ret = ath5k_chan_set(ah, &conf->chandef);
+ if (ret < 0)
+ goto unlock;
+ }
+
+ if ((changed & IEEE80211_CONF_CHANGE_POWER) &&
+ (ah->ah_txpower.txp_requested != conf->power_level)) {
+ ah->ah_txpower.txp_requested = conf->power_level;
+
+ /* Half dB steps */
+ ath5k_hw_set_txpower_limit(ah, (conf->power_level * 2));
+ }
+
+ if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS) {
+ ah->ah_retry_long = conf->long_frame_max_tx_count;
+ ah->ah_retry_short = conf->short_frame_max_tx_count;
+
+ for (i = 0; i < ah->ah_capabilities.cap_queues.q_tx_num; i++)
+ ath5k_hw_set_tx_retry_limits(ah, i);
+ }
+
+ /* TODO:
+ * 1) Move this on config_interface and handle each case
+ * separately eg. when we have only one STA vif, use
+ * AR5K_ANTMODE_SINGLE_AP
+ *
+ * 2) Allow the user to change antenna mode eg. when only
+ * one antenna is present
+ *
+ * 3) Allow the user to set default/tx antenna when possible
+ *
+ * 4) Default mode should handle 90% of the cases, together
+ * with fixed a/b and single AP modes we should be able to
+ * handle 99%. Sectored modes are extreme cases and i still
+ * haven't found a usage for them. If we decide to support them,
+ * then we must allow the user to set how many tx antennas we
+ * have available
+ */
+ ath5k_hw_set_antenna_mode(ah, ah->ah_ant_mode);
+
+unlock:
+ mutex_unlock(&ah->lock);
+ return ret;
+}
+
+
+static void
+ath5k_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+ struct ieee80211_bss_conf *bss_conf, u64 changes)
+{
+ struct ath5k_vif *avf = (void *)vif->drv_priv;
+ struct ath5k_hw *ah = hw->priv;
+ struct ath_common *common = ath5k_hw_common(ah);
+
+ mutex_lock(&ah->lock);
+
+ if (changes & BSS_CHANGED_BSSID) {
+ /* Cache for later use during resets */
+ memcpy(common->curbssid, bss_conf->bssid, ETH_ALEN);
+ common->curaid = 0;
+ ath5k_hw_set_bssid(ah);
+ }
+
+ if (changes & BSS_CHANGED_BEACON_INT)
+ ah->bintval = bss_conf->beacon_int;
+
+ if (changes & BSS_CHANGED_ERP_SLOT) {
+ int slot_time;
+
+ ah->ah_short_slot = bss_conf->use_short_slot;
+ slot_time = ath5k_hw_get_default_slottime(ah) +
+ 3 * ah->ah_coverage_class;
+ ath5k_hw_set_ifs_intervals(ah, slot_time);
+ }
+
+ if (changes & BSS_CHANGED_ASSOC) {
+ avf->assoc = vif->cfg.assoc;
+ if (vif->cfg.assoc)
+ ah->assoc = vif->cfg.assoc;
+ else
+ ah->assoc = ath5k_any_vif_assoc(ah);
+
+ if (ah->opmode == NL80211_IFTYPE_STATION)
+ ath5k_set_beacon_filter(hw, ah->assoc);
+ ath5k_hw_set_ledstate(ah, ah->assoc ?
+ AR5K_LED_ASSOC : AR5K_LED_INIT);
+ if (vif->cfg.assoc) {
+ ATH5K_DBG(ah, ATH5K_DEBUG_ANY,
+ "Bss Info ASSOC %d, bssid: %pM\n",
+ vif->cfg.aid, common->curbssid);
+ common->curaid = vif->cfg.aid;
+ ath5k_hw_set_bssid(ah);
+ /* Once ANI is available you would start it here */
+ }
+ }
+
+ if (changes & BSS_CHANGED_BEACON) {
+ spin_lock_bh(&ah->block);
+ ath5k_beacon_update(hw, vif);
+ spin_unlock_bh(&ah->block);
+ }
+
+ if (changes & BSS_CHANGED_BEACON_ENABLED)
+ ah->enable_beacon = bss_conf->enable_beacon;
+
+ if (changes & (BSS_CHANGED_BEACON | BSS_CHANGED_BEACON_ENABLED |
+ BSS_CHANGED_BEACON_INT))
+ ath5k_beacon_config(ah);
+
+ mutex_unlock(&ah->lock);
+}
+
+
+static u64
+ath5k_prepare_multicast(struct ieee80211_hw *hw,
+ struct netdev_hw_addr_list *mc_list)
+{
+ u32 mfilt[2], val;
+ u8 pos;
+ struct netdev_hw_addr *ha;
+
+ mfilt[0] = 0;
+ mfilt[1] = 0;
+
+ netdev_hw_addr_list_for_each(ha, mc_list) {
+ /* calculate XOR of eight 6-bit values */
+ val = get_unaligned_le32(ha->addr + 0);
+ pos = (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val;
+ val = get_unaligned_le32(ha->addr + 3);
+ pos ^= (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val;
+ pos &= 0x3f;
+ mfilt[pos / 32] |= (1 << (pos % 32));
+ /* XXX: we might be able to just do this instead,
+ * but not sure, needs testing, if we do use this we'd
+ * need to inform below not to reset the mcast */
+ /* ath5k_hw_set_mcast_filterindex(ah,
+ * ha->addr[5]); */
+ }
+
+ return ((u64)(mfilt[1]) << 32) | mfilt[0];
+}
+
+
+/*
+ * o always accept unicast, broadcast, and multicast traffic
+ * o multicast traffic for all BSSIDs will be enabled if mac80211
+ * says it should be
+ * o maintain current state of phy ofdm or phy cck error reception.
+ * If the hardware detects any of these type of errors then
+ * ath5k_hw_get_rx_filter() will pass to us the respective
+ * hardware filters to be able to receive these type of frames.
+ * o probe request frames are accepted only when operating in
+ * hostap, adhoc, or monitor modes
+ * o enable promiscuous mode according to the interface state
+ * o accept beacons:
+ * - when operating in adhoc mode so the 802.11 layer creates
+ * node table entries for peers,
+ * - when operating in station mode for collecting rssi data when
+ * the station is otherwise quiet, or
+ * - when scanning
+ */
+static void
+ath5k_configure_filter(struct ieee80211_hw *hw, unsigned int changed_flags,
+ unsigned int *new_flags, u64 multicast)
+{
+#define SUPPORTED_FIF_FLAGS \
+ (FIF_ALLMULTI | FIF_FCSFAIL | \
+ FIF_PLCPFAIL | FIF_CONTROL | FIF_OTHER_BSS | \
+ FIF_BCN_PRBRESP_PROMISC)
+
+ struct ath5k_hw *ah = hw->priv;
+ u32 mfilt[2], rfilt;
+ struct ath5k_vif_iter_data iter_data; /* to count STA interfaces */
+
+ mutex_lock(&ah->lock);
+
+ mfilt[0] = multicast;
+ mfilt[1] = multicast >> 32;
+
+ /* Only deal with supported flags */
+ changed_flags &= SUPPORTED_FIF_FLAGS;
+ *new_flags &= SUPPORTED_FIF_FLAGS;
+
+ /* If HW detects any phy or radar errors, leave those filters on.
+ * Also, always enable Unicast, Broadcasts and Multicast
+ * XXX: move unicast, bssid broadcasts and multicast to mac80211 */
+ rfilt = (ath5k_hw_get_rx_filter(ah) & (AR5K_RX_FILTER_PHYERR)) |
+ (AR5K_RX_FILTER_UCAST | AR5K_RX_FILTER_BCAST |
+ AR5K_RX_FILTER_MCAST);
+
+ /* Note, AR5K_RX_FILTER_MCAST is already enabled */
+ if (*new_flags & FIF_ALLMULTI) {
+ mfilt[0] = ~0;
+ mfilt[1] = ~0;
+ }
+
+ /* This is the best we can do */
+ if (*new_flags & (FIF_FCSFAIL | FIF_PLCPFAIL))
+ rfilt |= AR5K_RX_FILTER_PHYERR;
+
+ /* FIF_BCN_PRBRESP_PROMISC really means to enable beacons
+ * and probes for any BSSID */
+ if ((*new_flags & FIF_BCN_PRBRESP_PROMISC) || (ah->nvifs > 1))
+ rfilt |= AR5K_RX_FILTER_BEACON;
+
+ /* FIF_CONTROL doc says we should only pass on control frames for this
+ * station. This needs testing. I believe right now this
+ * enables *all* control frames, which is OK.. but
+ * we should see if we can improve on granularity */
+ if (*new_flags & FIF_CONTROL)
+ rfilt |= AR5K_RX_FILTER_CONTROL;
+
+ /* Additional settings per mode -- this is per ath5k */
+
+ /* XXX move these to mac80211, and add a beacon IFF flag to mac80211 */
+
+ switch (ah->opmode) {
+ case NL80211_IFTYPE_MESH_POINT:
+ rfilt |= AR5K_RX_FILTER_CONTROL |
+ AR5K_RX_FILTER_BEACON |
+ AR5K_RX_FILTER_PROBEREQ |
+ AR5K_RX_FILTER_PROM;
+ break;
+ case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_ADHOC:
+ rfilt |= AR5K_RX_FILTER_PROBEREQ |
+ AR5K_RX_FILTER_BEACON;
+ break;
+ case NL80211_IFTYPE_STATION:
+ if (ah->assoc)
+ rfilt |= AR5K_RX_FILTER_BEACON;
+ break;
+ default:
+ break;
+ }
+
+ iter_data.hw_macaddr = NULL;
+ iter_data.n_stas = 0;
+ iter_data.need_set_hw_addr = false;
+ ieee80211_iterate_active_interfaces_atomic(
+ ah->hw, IEEE80211_IFACE_ITER_RESUME_ALL,
+ ath5k_vif_iter, &iter_data);
+
+ /* Set up RX Filter */
+ if (iter_data.n_stas > 1) {
+ /* If you have multiple STA interfaces connected to
+ * different APs, ARPs are not received (most of the time?)
+ * Enabling PROMISC appears to fix that problem.
+ */
+ rfilt |= AR5K_RX_FILTER_PROM;
+ }
+
+ /* Set filters */
+ ath5k_hw_set_rx_filter(ah, rfilt);
+
+ /* Set multicast bits */
+ ath5k_hw_set_mcast_filter(ah, mfilt[0], mfilt[1]);
+ /* Set the cached hw filter flags, this will later actually
+ * be set in HW */
+ ah->filter_flags = rfilt;
+ /* Store current FIF filter flags */
+ ah->fif_filter_flags = *new_flags;
+
+ mutex_unlock(&ah->lock);
+}
+
+
+static int
+ath5k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
+ struct ieee80211_vif *vif, struct ieee80211_sta *sta,
+ struct ieee80211_key_conf *key)
+{
+ struct ath5k_hw *ah = hw->priv;
+ struct ath_common *common = ath5k_hw_common(ah);
+ int ret = 0;
+
+ if (ath5k_modparam_nohwcrypt)
+ return -EOPNOTSUPP;
+
+ if (key->flags & IEEE80211_KEY_FLAG_RX_MGMT)
+ return -EOPNOTSUPP;
+
+ if (vif->type == NL80211_IFTYPE_ADHOC &&
+ (key->cipher == WLAN_CIPHER_SUITE_TKIP ||
+ key->cipher == WLAN_CIPHER_SUITE_CCMP) &&
+ !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) {
+ /* don't program group keys when using IBSS_RSN */
+ return -EOPNOTSUPP;
+ }
+
+ switch (key->cipher) {
+ case WLAN_CIPHER_SUITE_WEP40:
+ case WLAN_CIPHER_SUITE_WEP104:
+ case WLAN_CIPHER_SUITE_TKIP:
+ break;
+ case WLAN_CIPHER_SUITE_CCMP:
+ if (common->crypt_caps & ATH_CRYPT_CAP_CIPHER_AESCCM)
+ break;
+ return -EOPNOTSUPP;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ mutex_lock(&ah->lock);
+
+ switch (cmd) {
+ case SET_KEY:
+ ret = ath_key_config(common, vif, sta, key);
+ if (ret >= 0) {
+ key->hw_key_idx = ret;
+ /* push IV and Michael MIC generation to stack */
+ key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
+ if (key->cipher == WLAN_CIPHER_SUITE_TKIP)
+ key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
+ if (key->cipher == WLAN_CIPHER_SUITE_CCMP)
+ key->flags |= IEEE80211_KEY_FLAG_SW_MGMT_TX;
+ ret = 0;
+ }
+ break;
+ case DISABLE_KEY:
+ ath_key_delete(common, key->hw_key_idx);
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ mutex_unlock(&ah->lock);
+ return ret;
+}
+
+
+static void
+ath5k_sw_scan_start(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ const u8 *mac_addr)
+{
+ struct ath5k_hw *ah = hw->priv;
+ if (!ah->assoc)
+ ath5k_hw_set_ledstate(ah, AR5K_LED_SCAN);
+}
+
+
+static void
+ath5k_sw_scan_complete(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
+{
+ struct ath5k_hw *ah = hw->priv;
+ ath5k_hw_set_ledstate(ah, ah->assoc ?
+ AR5K_LED_ASSOC : AR5K_LED_INIT);
+}
+
+
+static int
+ath5k_get_stats(struct ieee80211_hw *hw,
+ struct ieee80211_low_level_stats *stats)
+{
+ struct ath5k_hw *ah = hw->priv;
+
+ /* Force update */
+ ath5k_hw_update_mib_counters(ah);
+
+ stats->dot11ACKFailureCount = ah->stats.ack_fail;
+ stats->dot11RTSFailureCount = ah->stats.rts_fail;
+ stats->dot11RTSSuccessCount = ah->stats.rts_ok;
+ stats->dot11FCSErrorCount = ah->stats.fcs_error;
+
+ return 0;
+}
+
+
+static int
+ath5k_conf_tx(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+ unsigned int link_id, u16 queue,
+ const struct ieee80211_tx_queue_params *params)
+{
+ struct ath5k_hw *ah = hw->priv;
+ struct ath5k_txq_info qi;
+ int ret = 0;
+
+ if (queue >= ah->ah_capabilities.cap_queues.q_tx_num)
+ return 0;
+
+ mutex_lock(&ah->lock);
+
+ ath5k_hw_get_tx_queueprops(ah, queue, &qi);
+
+ qi.tqi_aifs = params->aifs;
+ qi.tqi_cw_min = params->cw_min;
+ qi.tqi_cw_max = params->cw_max;
+ qi.tqi_burst_time = params->txop * 32;
+
+ ATH5K_DBG(ah, ATH5K_DEBUG_ANY,
+ "Configure tx [queue %d], "
+ "aifs: %d, cw_min: %d, cw_max: %d, txop: %d\n",
+ queue, params->aifs, params->cw_min,
+ params->cw_max, params->txop);
+
+ if (ath5k_hw_set_tx_queueprops(ah, queue, &qi)) {
+ ATH5K_ERR(ah,
+ "Unable to update hardware queue %u!\n", queue);
+ ret = -EIO;
+ } else
+ ath5k_hw_reset_tx_queue(ah, queue);
+
+ mutex_unlock(&ah->lock);
+
+ return ret;
+}
+
+
+static u64
+ath5k_get_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
+{
+ struct ath5k_hw *ah = hw->priv;
+
+ return ath5k_hw_get_tsf64(ah);
+}
+
+
+static void
+ath5k_set_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif, u64 tsf)
+{
+ struct ath5k_hw *ah = hw->priv;
+
+ ath5k_hw_set_tsf64(ah, tsf);
+}
+
+
+static void
+ath5k_reset_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
+{
+ struct ath5k_hw *ah = hw->priv;
+
+ /*
+ * in IBSS mode we need to update the beacon timers too.
+ * this will also reset the TSF if we call it with 0
+ */
+ if (ah->opmode == NL80211_IFTYPE_ADHOC)
+ ath5k_beacon_update_timers(ah, 0);
+ else
+ ath5k_hw_reset_tsf(ah);
+}
+
+
+static int
+ath5k_get_survey(struct ieee80211_hw *hw, int idx, struct survey_info *survey)
+{
+ struct ath5k_hw *ah = hw->priv;
+ struct ieee80211_conf *conf = &hw->conf;
+ struct ath_common *common = ath5k_hw_common(ah);
+ struct ath_cycle_counters *cc = &common->cc_survey;
+ unsigned int div = common->clockrate * 1000;
+
+ if (idx != 0)
+ return -ENOENT;
+
+ spin_lock_bh(&common->cc_lock);
+ ath_hw_cycle_counters_update(common);
+ if (cc->cycles > 0) {
+ ah->survey.time += cc->cycles / div;
+ ah->survey.time_busy += cc->rx_busy / div;
+ ah->survey.time_rx += cc->rx_frame / div;
+ ah->survey.time_tx += cc->tx_frame / div;
+ }
+ memset(cc, 0, sizeof(*cc));
+ spin_unlock_bh(&common->cc_lock);
+
+ memcpy(survey, &ah->survey, sizeof(*survey));
+
+ survey->channel = conf->chandef.chan;
+ survey->noise = ah->ah_noise_floor;
+ survey->filled = SURVEY_INFO_NOISE_DBM |
+ SURVEY_INFO_IN_USE |
+ SURVEY_INFO_TIME |
+ SURVEY_INFO_TIME_BUSY |
+ SURVEY_INFO_TIME_RX |
+ SURVEY_INFO_TIME_TX;
+
+ return 0;
+}
+
+
+/**
+ * ath5k_set_coverage_class - Set IEEE 802.11 coverage class
+ *
+ * @hw: struct ieee80211_hw pointer
+ * @coverage_class: IEEE 802.11 coverage class number
+ *
+ * Mac80211 callback. Sets slot time, ACK timeout and CTS timeout for given
+ * coverage class. The values are persistent, they are restored after device
+ * reset.
+ */
+static void
+ath5k_set_coverage_class(struct ieee80211_hw *hw, s16 coverage_class)
+{
+ struct ath5k_hw *ah = hw->priv;
+
+ mutex_lock(&ah->lock);
+ ath5k_hw_set_coverage_class(ah, coverage_class);
+ mutex_unlock(&ah->lock);
+}
+
+
+static int
+ath5k_set_antenna(struct ieee80211_hw *hw, u32 tx_ant, u32 rx_ant)
+{
+ struct ath5k_hw *ah = hw->priv;
+
+ if (tx_ant == 1 && rx_ant == 1)
+ ath5k_hw_set_antenna_mode(ah, AR5K_ANTMODE_FIXED_A);
+ else if (tx_ant == 2 && rx_ant == 2)
+ ath5k_hw_set_antenna_mode(ah, AR5K_ANTMODE_FIXED_B);
+ else if ((tx_ant & 3) == 3 && (rx_ant & 3) == 3)
+ ath5k_hw_set_antenna_mode(ah, AR5K_ANTMODE_DEFAULT);
+ else
+ return -EINVAL;
+ return 0;
+}
+
+
+static int
+ath5k_get_antenna(struct ieee80211_hw *hw, u32 *tx_ant, u32 *rx_ant)
+{
+ struct ath5k_hw *ah = hw->priv;
+
+ switch (ah->ah_ant_mode) {
+ case AR5K_ANTMODE_FIXED_A:
+ *tx_ant = 1; *rx_ant = 1; break;
+ case AR5K_ANTMODE_FIXED_B:
+ *tx_ant = 2; *rx_ant = 2; break;
+ case AR5K_ANTMODE_DEFAULT:
+ *tx_ant = 3; *rx_ant = 3; break;
+ }
+ return 0;
+}
+
+
+static void ath5k_get_ringparam(struct ieee80211_hw *hw,
+ u32 *tx, u32 *tx_max, u32 *rx, u32 *rx_max)
+{
+ struct ath5k_hw *ah = hw->priv;
+
+ *tx = ah->txqs[AR5K_TX_QUEUE_ID_DATA_MIN].txq_max;
+
+ *tx_max = ATH5K_TXQ_LEN_MAX;
+ *rx = *rx_max = ATH_RXBUF;
+}
+
+
+static int ath5k_set_ringparam(struct ieee80211_hw *hw, u32 tx, u32 rx)
+{
+ struct ath5k_hw *ah = hw->priv;
+ u16 qnum;
+
+ /* only support setting tx ring size for now */
+ if (rx != ATH_RXBUF)
+ return -EINVAL;
+
+ /* restrict tx ring size min/max */
+ if (!tx || tx > ATH5K_TXQ_LEN_MAX)
+ return -EINVAL;
+
+ for (qnum = 0; qnum < ARRAY_SIZE(ah->txqs); qnum++) {
+ if (!ah->txqs[qnum].setup)
+ continue;
+ if (ah->txqs[qnum].qnum < AR5K_TX_QUEUE_ID_DATA_MIN ||
+ ah->txqs[qnum].qnum > AR5K_TX_QUEUE_ID_DATA_MAX)
+ continue;
+
+ ah->txqs[qnum].txq_max = tx;
+ if (ah->txqs[qnum].txq_len >= ah->txqs[qnum].txq_max)
+ ieee80211_stop_queue(hw, ah->txqs[qnum].qnum);
+ }
+
+ return 0;
+}
+
+
+const struct ieee80211_ops ath5k_hw_ops = {
+ .tx = ath5k_tx,
+ .start = ath5k_start,
+ .stop = ath5k_stop,
+ .add_interface = ath5k_add_interface,
+ /* .change_interface = not implemented */
+ .remove_interface = ath5k_remove_interface,
+ .config = ath5k_config,
+ .bss_info_changed = ath5k_bss_info_changed,
+ .prepare_multicast = ath5k_prepare_multicast,
+ .configure_filter = ath5k_configure_filter,
+ /* .set_tim = not implemented */
+ .set_key = ath5k_set_key,
+ /* .update_tkip_key = not implemented */
+ /* .hw_scan = not implemented */
+ .sw_scan_start = ath5k_sw_scan_start,
+ .sw_scan_complete = ath5k_sw_scan_complete,
+ .get_stats = ath5k_get_stats,
+ /* .set_frag_threshold = not implemented */
+ /* .set_rts_threshold = not implemented */
+ /* .sta_add = not implemented */
+ /* .sta_remove = not implemented */
+ /* .sta_notify = not implemented */
+ .conf_tx = ath5k_conf_tx,
+ .get_tsf = ath5k_get_tsf,
+ .set_tsf = ath5k_set_tsf,
+ .reset_tsf = ath5k_reset_tsf,
+ /* .tx_last_beacon = not implemented */
+ /* .ampdu_action = not needed */
+ .get_survey = ath5k_get_survey,
+ .set_coverage_class = ath5k_set_coverage_class,
+ /* .rfkill_poll = not implemented */
+ /* .flush = not implemented */
+ /* .channel_switch = not implemented */
+ /* .napi_poll = not implemented */
+ .set_antenna = ath5k_set_antenna,
+ .get_antenna = ath5k_get_antenna,
+ .set_ringparam = ath5k_set_ringparam,
+ .get_ringparam = ath5k_get_ringparam,
+};
diff --git a/drivers/net/wireless/ath/ath5k/pci.c b/drivers/net/wireless/ath/ath5k/pci.c
new file mode 100644
index 000000000..86b8cb975
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/pci.c
@@ -0,0 +1,341 @@
+/*
+ * Copyright (c) 2008-2009 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/nl80211.h>
+#include <linux/pci.h>
+#include <linux/etherdevice.h>
+#include <linux/module.h>
+#include "../ath.h"
+#include "ath5k.h"
+#include "debug.h"
+#include "base.h"
+#include "reg.h"
+
+/* Known PCI ids */
+static const struct pci_device_id ath5k_pci_id_table[] = {
+ { PCI_VDEVICE(ATHEROS, 0x0207) }, /* 5210 early */
+ { PCI_VDEVICE(ATHEROS, 0x0007) }, /* 5210 */
+ { PCI_VDEVICE(ATHEROS, 0x0011) }, /* 5311 - this is on AHB bus !*/
+ { PCI_VDEVICE(ATHEROS, 0x0012) }, /* 5211 */
+ { PCI_VDEVICE(ATHEROS, 0x0013) }, /* 5212 */
+ { PCI_VDEVICE(3COM_2, 0x0013) }, /* 3com 5212 */
+ { PCI_VDEVICE(3COM, 0x0013) }, /* 3com 3CRDAG675 5212 */
+ { PCI_VDEVICE(ATHEROS, 0x1014) }, /* IBM minipci 5212 */
+ { PCI_VDEVICE(ATHEROS, 0x0014) }, /* 5212 compatible */
+ { PCI_VDEVICE(ATHEROS, 0x0015) }, /* 5212 compatible */
+ { PCI_VDEVICE(ATHEROS, 0x0016) }, /* 5212 compatible */
+ { PCI_VDEVICE(ATHEROS, 0x0017) }, /* 5212 compatible */
+ { PCI_VDEVICE(ATHEROS, 0x0018) }, /* 5212 compatible */
+ { PCI_VDEVICE(ATHEROS, 0x0019) }, /* 5212 compatible */
+ { PCI_VDEVICE(ATHEROS, 0x001a) }, /* 2413 Griffin-lite */
+ { PCI_VDEVICE(ATHEROS, 0x001b) }, /* 5413 Eagle */
+ { PCI_VDEVICE(ATHEROS, 0x001c) }, /* PCI-E cards */
+ { PCI_VDEVICE(ATHEROS, 0x001d) }, /* 2417 Nala */
+ { PCI_VDEVICE(ATHEROS, 0xff1b) }, /* AR5BXB63 */
+ { 0 }
+};
+MODULE_DEVICE_TABLE(pci, ath5k_pci_id_table);
+
+/* return bus cachesize in 4B word units */
+static void ath5k_pci_read_cachesize(struct ath_common *common, int *csz)
+{
+ struct ath5k_hw *ah = (struct ath5k_hw *) common->priv;
+ u8 u8tmp;
+
+ pci_read_config_byte(ah->pdev, PCI_CACHE_LINE_SIZE, &u8tmp);
+ *csz = (int)u8tmp;
+
+ /*
+ * This check was put in to avoid "unpleasant" consequences if
+ * the bootrom has not fully initialized all PCI devices.
+ * Sometimes the cache line size register is not set
+ */
+
+ if (*csz == 0)
+ *csz = L1_CACHE_BYTES >> 2; /* Use the default size */
+}
+
+/*
+ * Read from eeprom
+ */
+static bool
+ath5k_pci_eeprom_read(struct ath_common *common, u32 offset, u16 *data)
+{
+ struct ath5k_hw *ah = (struct ath5k_hw *) common->ah;
+ u32 status, timeout;
+
+ /*
+ * Initialize EEPROM access
+ */
+ if (ah->ah_version == AR5K_AR5210) {
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_EEAE);
+ (void)ath5k_hw_reg_read(ah, AR5K_EEPROM_BASE + (4 * offset));
+ } else {
+ ath5k_hw_reg_write(ah, offset, AR5K_EEPROM_BASE);
+ AR5K_REG_ENABLE_BITS(ah, AR5K_EEPROM_CMD,
+ AR5K_EEPROM_CMD_READ);
+ }
+
+ for (timeout = AR5K_TUNE_REGISTER_TIMEOUT; timeout > 0; timeout--) {
+ status = ath5k_hw_reg_read(ah, AR5K_EEPROM_STATUS);
+ if (status & AR5K_EEPROM_STAT_RDDONE) {
+ if (status & AR5K_EEPROM_STAT_RDERR)
+ return false;
+ *data = (u16)(ath5k_hw_reg_read(ah, AR5K_EEPROM_DATA) &
+ 0xffff);
+ return true;
+ }
+ usleep_range(15, 20);
+ }
+
+ return false;
+}
+
+int ath5k_hw_read_srev(struct ath5k_hw *ah)
+{
+ ah->ah_mac_srev = ath5k_hw_reg_read(ah, AR5K_SREV);
+ return 0;
+}
+
+/*
+ * Read the MAC address from eeprom or platform_data
+ */
+static int ath5k_pci_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac)
+{
+ u8 mac_d[ETH_ALEN] = {};
+ u32 total, offset;
+ u16 data;
+ int octet;
+
+ AR5K_EEPROM_READ(0x20, data);
+
+ for (offset = 0x1f, octet = 0, total = 0; offset >= 0x1d; offset--) {
+ AR5K_EEPROM_READ(offset, data);
+
+ total += data;
+ mac_d[octet + 1] = data & 0xff;
+ mac_d[octet] = data >> 8;
+ octet += 2;
+ }
+
+ if (!total || total == 3 * 0xffff)
+ return -EINVAL;
+
+ memcpy(mac, mac_d, ETH_ALEN);
+
+ return 0;
+}
+
+
+/* Common ath_bus_opts structure */
+static const struct ath_bus_ops ath_pci_bus_ops = {
+ .ath_bus_type = ATH_PCI,
+ .read_cachesize = ath5k_pci_read_cachesize,
+ .eeprom_read = ath5k_pci_eeprom_read,
+ .eeprom_read_mac = ath5k_pci_eeprom_read_mac,
+};
+
+/********************\
+* PCI Initialization *
+\********************/
+
+static int
+ath5k_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ void __iomem *mem;
+ struct ath5k_hw *ah;
+ struct ieee80211_hw *hw;
+ int ret;
+ u8 csz;
+
+ /*
+ * L0s needs to be disabled on all ath5k cards.
+ *
+ * For distributions shipping with CONFIG_PCIEASPM (this will be enabled
+ * by default in the future in 2.6.36) this will also mean both L1 and
+ * L0s will be disabled when a pre 1.1 PCIe device is detected. We do
+ * know L1 works correctly even for all ath5k pre 1.1 PCIe devices
+ * though but cannot currently undue the effect of a blacklist, for
+ * details you can read pcie_aspm_sanity_check() and see how it adjusts
+ * the device link capability.
+ *
+ * It may be possible in the future to implement some PCI API to allow
+ * drivers to override blacklists for pre 1.1 PCIe but for now it is
+ * best to accept that both L0s and L1 will be disabled completely for
+ * distributions shipping with CONFIG_PCIEASPM rather than having this
+ * issue present. Motivation for adding this new API will be to help
+ * with power consumption for some of these devices.
+ */
+ pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S);
+
+ ret = pci_enable_device(pdev);
+ if (ret) {
+ dev_err(&pdev->dev, "can't enable device\n");
+ goto err;
+ }
+
+ /* XXX 32-bit addressing only */
+ ret = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
+ if (ret) {
+ dev_err(&pdev->dev, "32-bit DMA not available\n");
+ goto err_dis;
+ }
+
+ /*
+ * Cache line size is used to size and align various
+ * structures used to communicate with the hardware.
+ */
+ pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz);
+ if (csz == 0) {
+ /*
+ * Linux 2.4.18 (at least) writes the cache line size
+ * register as a 16-bit wide register which is wrong.
+ * We must have this setup properly for rx buffer
+ * DMA to work so force a reasonable value here if it
+ * comes up zero.
+ */
+ csz = L1_CACHE_BYTES >> 2;
+ pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz);
+ }
+ /*
+ * The default setting of latency timer yields poor results,
+ * set it to the value used by other systems. It may be worth
+ * tweaking this setting more.
+ */
+ pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8);
+
+ /* Enable bus mastering */
+ pci_set_master(pdev);
+
+ /*
+ * Disable the RETRY_TIMEOUT register (0x41) to keep
+ * PCI Tx retries from interfering with C3 CPU state.
+ */
+ pci_write_config_byte(pdev, 0x41, 0);
+
+ ret = pci_request_region(pdev, 0, "ath5k");
+ if (ret) {
+ dev_err(&pdev->dev, "cannot reserve PCI memory region\n");
+ goto err_dis;
+ }
+
+ mem = pci_iomap(pdev, 0, 0);
+ if (!mem) {
+ dev_err(&pdev->dev, "cannot remap PCI memory region\n");
+ ret = -EIO;
+ goto err_reg;
+ }
+
+ /*
+ * Allocate hw (mac80211 main struct)
+ * and hw->priv (driver private data)
+ */
+ hw = ieee80211_alloc_hw(sizeof(*ah), &ath5k_hw_ops);
+ if (hw == NULL) {
+ dev_err(&pdev->dev, "cannot allocate ieee80211_hw\n");
+ ret = -ENOMEM;
+ goto err_map;
+ }
+
+ dev_info(&pdev->dev, "registered as '%s'\n", wiphy_name(hw->wiphy));
+
+ ah = hw->priv;
+ ah->hw = hw;
+ ah->pdev = pdev;
+ ah->dev = &pdev->dev;
+ ah->irq = pdev->irq;
+ ah->devid = id->device;
+ ah->iobase = mem; /* So we can unmap it on detach */
+
+ /* Initialize */
+ ret = ath5k_init_ah(ah, &ath_pci_bus_ops);
+ if (ret)
+ goto err_free;
+
+ /* Set private data */
+ pci_set_drvdata(pdev, hw);
+
+ return 0;
+err_free:
+ ieee80211_free_hw(hw);
+err_map:
+ pci_iounmap(pdev, mem);
+err_reg:
+ pci_release_region(pdev, 0);
+err_dis:
+ pci_disable_device(pdev);
+err:
+ return ret;
+}
+
+static void
+ath5k_pci_remove(struct pci_dev *pdev)
+{
+ struct ieee80211_hw *hw = pci_get_drvdata(pdev);
+ struct ath5k_hw *ah = hw->priv;
+
+ ath5k_deinit_ah(ah);
+ pci_iounmap(pdev, ah->iobase);
+ pci_release_region(pdev, 0);
+ pci_disable_device(pdev);
+ ieee80211_free_hw(hw);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int ath5k_pci_suspend(struct device *dev)
+{
+ struct ieee80211_hw *hw = dev_get_drvdata(dev);
+ struct ath5k_hw *ah = hw->priv;
+
+ ath5k_led_off(ah);
+ return 0;
+}
+
+static int ath5k_pci_resume(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct ieee80211_hw *hw = pci_get_drvdata(pdev);
+ struct ath5k_hw *ah = hw->priv;
+
+ /*
+ * Suspend/Resume resets the PCI configuration space, so we have to
+ * re-disable the RETRY_TIMEOUT register (0x41) to keep
+ * PCI Tx retries from interfering with C3 CPU state
+ */
+ pci_write_config_byte(pdev, 0x41, 0);
+
+ ath5k_led_enable(ah);
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(ath5k_pm_ops, ath5k_pci_suspend, ath5k_pci_resume);
+#define ATH5K_PM_OPS (&ath5k_pm_ops)
+#else
+#define ATH5K_PM_OPS NULL
+#endif /* CONFIG_PM_SLEEP */
+
+static struct pci_driver ath5k_pci_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = ath5k_pci_id_table,
+ .probe = ath5k_pci_probe,
+ .remove = ath5k_pci_remove,
+ .driver.pm = ATH5K_PM_OPS,
+};
+
+module_pci_driver(ath5k_pci_driver);
diff --git a/drivers/net/wireless/ath/ath5k/pcu.c b/drivers/net/wireless/ath/ath5k/pcu.c
new file mode 100644
index 000000000..3f4ce4e9c
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/pcu.c
@@ -0,0 +1,1011 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ * Copyright (c) 2007-2008 Matthew W. S. Bell <mentor@madwifi.org>
+ * Copyright (c) 2007-2008 Luis Rodriguez <mcgrof@winlab.rutgers.edu>
+ * Copyright (c) 2007-2008 Pavel Roskin <proski@gnu.org>
+ * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/*********************************\
+* Protocol Control Unit Functions *
+\*********************************/
+
+#include <asm/unaligned.h>
+
+#include "ath5k.h"
+#include "reg.h"
+#include "debug.h"
+
+/**
+ * DOC: Protocol Control Unit (PCU) functions
+ *
+ * Protocol control unit is responsible to maintain various protocol
+ * properties before a frame is send and after a frame is received to/from
+ * baseband. To be more specific, PCU handles:
+ *
+ * - Buffering of RX and TX frames (after QCU/DCUs)
+ *
+ * - Encrypting and decrypting (using the built-in engine)
+ *
+ * - Generating ACKs, RTS/CTS frames
+ *
+ * - Maintaining TSF
+ *
+ * - FCS
+ *
+ * - Updating beacon data (with TSF etc)
+ *
+ * - Generating virtual CCA
+ *
+ * - RX/Multicast filtering
+ *
+ * - BSSID filtering
+ *
+ * - Various statistics
+ *
+ * -Different operating modes: AP, STA, IBSS
+ *
+ * Note: Most of these functions can be tweaked/bypassed so you can do
+ * them on sw above for debugging or research. For more infos check out PCU
+ * registers on reg.h.
+ */
+
+/**
+ * DOC: ACK rates
+ *
+ * AR5212+ can use higher rates for ack transmission
+ * based on current tx rate instead of the base rate.
+ * It does this to better utilize channel usage.
+ * There is a mapping between G rates (that cover both
+ * CCK and OFDM) and ack rates that we use when setting
+ * rate -> duration table. This mapping is hw-based so
+ * don't change anything.
+ *
+ * To enable this functionality we must set
+ * ah->ah_ack_bitrate_high to true else base rate is
+ * used (1Mb for CCK, 6Mb for OFDM).
+ */
+static const unsigned int ack_rates_high[] =
+/* Tx -> ACK */
+/* 1Mb -> 1Mb */ { 0,
+/* 2MB -> 2Mb */ 1,
+/* 5.5Mb -> 2Mb */ 1,
+/* 11Mb -> 2Mb */ 1,
+/* 6Mb -> 6Mb */ 4,
+/* 9Mb -> 6Mb */ 4,
+/* 12Mb -> 12Mb */ 6,
+/* 18Mb -> 12Mb */ 6,
+/* 24Mb -> 24Mb */ 8,
+/* 36Mb -> 24Mb */ 8,
+/* 48Mb -> 24Mb */ 8,
+/* 54Mb -> 24Mb */ 8 };
+
+/*******************\
+* Helper functions *
+\*******************/
+
+/**
+ * ath5k_hw_get_frame_duration() - Get tx time of a frame
+ * @ah: The &struct ath5k_hw
+ * @band: One of enum nl80211_band
+ * @len: Frame's length in bytes
+ * @rate: The @struct ieee80211_rate
+ * @shortpre: Indicate short preample
+ *
+ * Calculate tx duration of a frame given it's rate and length
+ * It extends ieee80211_generic_frame_duration for non standard
+ * bwmodes.
+ */
+int
+ath5k_hw_get_frame_duration(struct ath5k_hw *ah, enum nl80211_band band,
+ int len, struct ieee80211_rate *rate, bool shortpre)
+{
+ int sifs, preamble, plcp_bits, sym_time;
+ int bitrate, bits, symbols, symbol_bits;
+ int dur;
+
+ /* Fallback */
+ if (!ah->ah_bwmode) {
+ __le16 raw_dur = ieee80211_generic_frame_duration(ah->hw,
+ NULL, band, len, rate);
+
+ /* subtract difference between long and short preamble */
+ dur = le16_to_cpu(raw_dur);
+ if (shortpre)
+ dur -= 96;
+
+ return dur;
+ }
+
+ bitrate = rate->bitrate;
+ preamble = AR5K_INIT_OFDM_PREAMPLE_TIME;
+ plcp_bits = AR5K_INIT_OFDM_PLCP_BITS;
+ sym_time = AR5K_INIT_OFDM_SYMBOL_TIME;
+
+ switch (ah->ah_bwmode) {
+ case AR5K_BWMODE_40MHZ:
+ sifs = AR5K_INIT_SIFS_TURBO;
+ preamble = AR5K_INIT_OFDM_PREAMBLE_TIME_MIN;
+ break;
+ case AR5K_BWMODE_10MHZ:
+ sifs = AR5K_INIT_SIFS_HALF_RATE;
+ preamble *= 2;
+ sym_time *= 2;
+ bitrate = DIV_ROUND_UP(bitrate, 2);
+ break;
+ case AR5K_BWMODE_5MHZ:
+ sifs = AR5K_INIT_SIFS_QUARTER_RATE;
+ preamble *= 4;
+ sym_time *= 4;
+ bitrate = DIV_ROUND_UP(bitrate, 4);
+ break;
+ default:
+ sifs = AR5K_INIT_SIFS_DEFAULT_BG;
+ break;
+ }
+
+ bits = plcp_bits + (len << 3);
+ /* Bit rate is in 100Kbits */
+ symbol_bits = bitrate * sym_time;
+ symbols = DIV_ROUND_UP(bits * 10, symbol_bits);
+
+ dur = sifs + preamble + (sym_time * symbols);
+
+ return dur;
+}
+
+/**
+ * ath5k_hw_get_default_slottime() - Get the default slot time for current mode
+ * @ah: The &struct ath5k_hw
+ */
+unsigned int
+ath5k_hw_get_default_slottime(struct ath5k_hw *ah)
+{
+ struct ieee80211_channel *channel = ah->ah_current_channel;
+ unsigned int slot_time;
+
+ switch (ah->ah_bwmode) {
+ case AR5K_BWMODE_40MHZ:
+ slot_time = AR5K_INIT_SLOT_TIME_TURBO;
+ break;
+ case AR5K_BWMODE_10MHZ:
+ slot_time = AR5K_INIT_SLOT_TIME_HALF_RATE;
+ break;
+ case AR5K_BWMODE_5MHZ:
+ slot_time = AR5K_INIT_SLOT_TIME_QUARTER_RATE;
+ break;
+ case AR5K_BWMODE_DEFAULT:
+ default:
+ slot_time = AR5K_INIT_SLOT_TIME_DEFAULT;
+ if ((channel->hw_value == AR5K_MODE_11B) && !ah->ah_short_slot)
+ slot_time = AR5K_INIT_SLOT_TIME_B;
+ break;
+ }
+
+ return slot_time;
+}
+
+/**
+ * ath5k_hw_get_default_sifs() - Get the default SIFS for current mode
+ * @ah: The &struct ath5k_hw
+ */
+unsigned int
+ath5k_hw_get_default_sifs(struct ath5k_hw *ah)
+{
+ struct ieee80211_channel *channel = ah->ah_current_channel;
+ unsigned int sifs;
+
+ switch (ah->ah_bwmode) {
+ case AR5K_BWMODE_40MHZ:
+ sifs = AR5K_INIT_SIFS_TURBO;
+ break;
+ case AR5K_BWMODE_10MHZ:
+ sifs = AR5K_INIT_SIFS_HALF_RATE;
+ break;
+ case AR5K_BWMODE_5MHZ:
+ sifs = AR5K_INIT_SIFS_QUARTER_RATE;
+ break;
+ case AR5K_BWMODE_DEFAULT:
+ default:
+ sifs = AR5K_INIT_SIFS_DEFAULT_BG;
+ if (channel->band == NL80211_BAND_5GHZ)
+ sifs = AR5K_INIT_SIFS_DEFAULT_A;
+ break;
+ }
+
+ return sifs;
+}
+
+/**
+ * ath5k_hw_update_mib_counters() - Update MIB counters (mac layer statistics)
+ * @ah: The &struct ath5k_hw
+ *
+ * Reads MIB counters from PCU and updates sw statistics. Is called after a
+ * MIB interrupt, because one of these counters might have reached their maximum
+ * and triggered the MIB interrupt, to let us read and clear the counter.
+ *
+ * NOTE: Is called in interrupt context!
+ */
+void
+ath5k_hw_update_mib_counters(struct ath5k_hw *ah)
+{
+ struct ath5k_statistics *stats = &ah->stats;
+
+ /* Read-And-Clear */
+ stats->ack_fail += ath5k_hw_reg_read(ah, AR5K_ACK_FAIL);
+ stats->rts_fail += ath5k_hw_reg_read(ah, AR5K_RTS_FAIL);
+ stats->rts_ok += ath5k_hw_reg_read(ah, AR5K_RTS_OK);
+ stats->fcs_error += ath5k_hw_reg_read(ah, AR5K_FCS_FAIL);
+ stats->beacons += ath5k_hw_reg_read(ah, AR5K_BEACON_CNT);
+}
+
+
+/******************\
+* ACK/CTS Timeouts *
+\******************/
+
+/**
+ * ath5k_hw_write_rate_duration() - Fill rate code to duration table
+ * @ah: The &struct ath5k_hw
+ *
+ * Write the rate code to duration table upon hw reset. This is a helper for
+ * ath5k_hw_pcu_init(). It seems all this is doing is setting an ACK timeout on
+ * the hardware, based on current mode, for each rate. The rates which are
+ * capable of short preamble (802.11b rates 2Mbps, 5.5Mbps, and 11Mbps) have
+ * different rate code so we write their value twice (one for long preamble
+ * and one for short).
+ *
+ * Note: Band doesn't matter here, if we set the values for OFDM it works
+ * on both a and g modes. So all we have to do is set values for all g rates
+ * that include all OFDM and CCK rates.
+ *
+ */
+static inline void
+ath5k_hw_write_rate_duration(struct ath5k_hw *ah)
+{
+ struct ieee80211_rate *rate;
+ unsigned int i;
+ /* 802.11g covers both OFDM and CCK */
+ u8 band = NL80211_BAND_2GHZ;
+
+ /* Write rate duration table */
+ for (i = 0; i < ah->sbands[band].n_bitrates; i++) {
+ u32 reg;
+ u16 tx_time;
+
+ if (ah->ah_ack_bitrate_high)
+ rate = &ah->sbands[band].bitrates[ack_rates_high[i]];
+ /* CCK -> 1Mb */
+ else if (i < 4)
+ rate = &ah->sbands[band].bitrates[0];
+ /* OFDM -> 6Mb */
+ else
+ rate = &ah->sbands[band].bitrates[4];
+
+ /* Set ACK timeout */
+ reg = AR5K_RATE_DUR(rate->hw_value);
+
+ /* An ACK frame consists of 10 bytes. If you add the FCS,
+ * which ieee80211_generic_frame_duration() adds,
+ * its 14 bytes. Note we use the control rate and not the
+ * actual rate for this rate. See mac80211 tx.c
+ * ieee80211_duration() for a brief description of
+ * what rate we should choose to TX ACKs. */
+ tx_time = ath5k_hw_get_frame_duration(ah, band, 10,
+ rate, false);
+
+ ath5k_hw_reg_write(ah, tx_time, reg);
+
+ if (!(rate->flags & IEEE80211_RATE_SHORT_PREAMBLE))
+ continue;
+
+ tx_time = ath5k_hw_get_frame_duration(ah, band, 10, rate, true);
+ ath5k_hw_reg_write(ah, tx_time,
+ reg + (AR5K_SET_SHORT_PREAMBLE << 2));
+ }
+}
+
+/**
+ * ath5k_hw_set_ack_timeout() - Set ACK timeout on PCU
+ * @ah: The &struct ath5k_hw
+ * @timeout: Timeout in usec
+ */
+static int
+ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout)
+{
+ if (ath5k_hw_clocktoh(ah, AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_ACK))
+ <= timeout)
+ return -EINVAL;
+
+ AR5K_REG_WRITE_BITS(ah, AR5K_TIME_OUT, AR5K_TIME_OUT_ACK,
+ ath5k_hw_htoclock(ah, timeout));
+
+ return 0;
+}
+
+/**
+ * ath5k_hw_set_cts_timeout() - Set CTS timeout on PCU
+ * @ah: The &struct ath5k_hw
+ * @timeout: Timeout in usec
+ */
+static int
+ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout)
+{
+ if (ath5k_hw_clocktoh(ah, AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_CTS))
+ <= timeout)
+ return -EINVAL;
+
+ AR5K_REG_WRITE_BITS(ah, AR5K_TIME_OUT, AR5K_TIME_OUT_CTS,
+ ath5k_hw_htoclock(ah, timeout));
+
+ return 0;
+}
+
+
+/*******************\
+* RX filter Control *
+\*******************/
+
+/**
+ * ath5k_hw_set_lladdr() - Set station id
+ * @ah: The &struct ath5k_hw
+ * @mac: The card's mac address (array of octets)
+ *
+ * Set station id on hw using the provided mac address
+ */
+int
+ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac)
+{
+ struct ath_common *common = ath5k_hw_common(ah);
+ u32 low_id, high_id;
+ u32 pcu_reg;
+
+ /* Set new station ID */
+ memcpy(common->macaddr, mac, ETH_ALEN);
+
+ pcu_reg = ath5k_hw_reg_read(ah, AR5K_STA_ID1) & 0xffff0000;
+
+ low_id = get_unaligned_le32(mac);
+ high_id = get_unaligned_le16(mac + 4);
+
+ ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0);
+ ath5k_hw_reg_write(ah, pcu_reg | high_id, AR5K_STA_ID1);
+
+ return 0;
+}
+
+/**
+ * ath5k_hw_set_bssid() - Set current BSSID on hw
+ * @ah: The &struct ath5k_hw
+ *
+ * Sets the current BSSID and BSSID mask we have from the
+ * common struct into the hardware
+ */
+void
+ath5k_hw_set_bssid(struct ath5k_hw *ah)
+{
+ struct ath_common *common = ath5k_hw_common(ah);
+ u16 tim_offset = 0;
+
+ /*
+ * Set BSSID mask on 5212
+ */
+ if (ah->ah_version == AR5K_AR5212)
+ ath_hw_setbssidmask(common);
+
+ /*
+ * Set BSSID
+ */
+ ath5k_hw_reg_write(ah,
+ get_unaligned_le32(common->curbssid),
+ AR5K_BSS_ID0);
+ ath5k_hw_reg_write(ah,
+ get_unaligned_le16(common->curbssid + 4) |
+ ((common->curaid & 0x3fff) << AR5K_BSS_ID1_AID_S),
+ AR5K_BSS_ID1);
+
+ if (common->curaid == 0) {
+ ath5k_hw_disable_pspoll(ah);
+ return;
+ }
+
+ AR5K_REG_WRITE_BITS(ah, AR5K_BEACON, AR5K_BEACON_TIM,
+ tim_offset ? tim_offset + 4 : 0);
+
+ ath5k_hw_enable_pspoll(ah, NULL, 0);
+}
+
+/**
+ * ath5k_hw_set_bssid_mask() - Filter out bssids we listen
+ * @ah: The &struct ath5k_hw
+ * @mask: The BSSID mask to set (array of octets)
+ *
+ * BSSID masking is a method used by AR5212 and newer hardware to inform PCU
+ * which bits of the interface's MAC address should be looked at when trying
+ * to decide which packets to ACK. In station mode and AP mode with a single
+ * BSS every bit matters since we lock to only one BSS. In AP mode with
+ * multiple BSSes (virtual interfaces) not every bit matters because hw must
+ * accept frames for all BSSes and so we tweak some bits of our mac address
+ * in order to have multiple BSSes.
+ *
+ * For more information check out ../hw.c of the common ath module.
+ */
+void
+ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask)
+{
+ struct ath_common *common = ath5k_hw_common(ah);
+
+ /* Cache bssid mask so that we can restore it
+ * on reset */
+ memcpy(common->bssidmask, mask, ETH_ALEN);
+ if (ah->ah_version == AR5K_AR5212)
+ ath_hw_setbssidmask(common);
+}
+
+/**
+ * ath5k_hw_set_mcast_filter() - Set multicast filter
+ * @ah: The &struct ath5k_hw
+ * @filter0: Lower 32bits of muticast filter
+ * @filter1: Higher 16bits of multicast filter
+ */
+void
+ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1)
+{
+ ath5k_hw_reg_write(ah, filter0, AR5K_MCAST_FILTER0);
+ ath5k_hw_reg_write(ah, filter1, AR5K_MCAST_FILTER1);
+}
+
+/**
+ * ath5k_hw_get_rx_filter() - Get current rx filter
+ * @ah: The &struct ath5k_hw
+ *
+ * Returns the RX filter by reading rx filter and
+ * phy error filter registers. RX filter is used
+ * to set the allowed frame types that PCU will accept
+ * and pass to the driver. For a list of frame types
+ * check out reg.h.
+ */
+u32
+ath5k_hw_get_rx_filter(struct ath5k_hw *ah)
+{
+ u32 data, filter = 0;
+
+ filter = ath5k_hw_reg_read(ah, AR5K_RX_FILTER);
+
+ /*Radar detection for 5212*/
+ if (ah->ah_version == AR5K_AR5212) {
+ data = ath5k_hw_reg_read(ah, AR5K_PHY_ERR_FIL);
+
+ if (data & AR5K_PHY_ERR_FIL_RADAR)
+ filter |= AR5K_RX_FILTER_RADARERR;
+ if (data & (AR5K_PHY_ERR_FIL_OFDM | AR5K_PHY_ERR_FIL_CCK))
+ filter |= AR5K_RX_FILTER_PHYERR;
+ }
+
+ return filter;
+}
+
+/**
+ * ath5k_hw_set_rx_filter() - Set rx filter
+ * @ah: The &struct ath5k_hw
+ * @filter: RX filter mask (see reg.h)
+ *
+ * Sets RX filter register and also handles PHY error filter
+ * register on 5212 and newer chips so that we have proper PHY
+ * error reporting.
+ */
+void
+ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter)
+{
+ u32 data = 0;
+
+ /* Set PHY error filter register on 5212*/
+ if (ah->ah_version == AR5K_AR5212) {
+ if (filter & AR5K_RX_FILTER_RADARERR)
+ data |= AR5K_PHY_ERR_FIL_RADAR;
+ if (filter & AR5K_RX_FILTER_PHYERR)
+ data |= AR5K_PHY_ERR_FIL_OFDM | AR5K_PHY_ERR_FIL_CCK;
+ }
+
+ /*
+ * The AR5210 uses promiscuous mode to detect radar activity
+ */
+ if (ah->ah_version == AR5K_AR5210 &&
+ (filter & AR5K_RX_FILTER_RADARERR)) {
+ filter &= ~AR5K_RX_FILTER_RADARERR;
+ filter |= AR5K_RX_FILTER_PROM;
+ }
+
+ /*Zero length DMA (phy error reporting) */
+ if (data)
+ AR5K_REG_ENABLE_BITS(ah, AR5K_RXCFG, AR5K_RXCFG_ZLFDMA);
+ else
+ AR5K_REG_DISABLE_BITS(ah, AR5K_RXCFG, AR5K_RXCFG_ZLFDMA);
+
+ /*Write RX Filter register*/
+ ath5k_hw_reg_write(ah, filter & 0xff, AR5K_RX_FILTER);
+
+ /*Write PHY error filter register on 5212*/
+ if (ah->ah_version == AR5K_AR5212)
+ ath5k_hw_reg_write(ah, data, AR5K_PHY_ERR_FIL);
+
+}
+
+
+/****************\
+* Beacon control *
+\****************/
+
+#define ATH5K_MAX_TSF_READ 10
+
+/**
+ * ath5k_hw_get_tsf64() - Get the full 64bit TSF
+ * @ah: The &struct ath5k_hw
+ *
+ * Returns the current TSF
+ */
+u64
+ath5k_hw_get_tsf64(struct ath5k_hw *ah)
+{
+ u32 tsf_lower, tsf_upper1, tsf_upper2;
+ int i;
+ unsigned long flags;
+
+ /* This code is time critical - we don't want to be interrupted here */
+ local_irq_save(flags);
+
+ /*
+ * While reading TSF upper and then lower part, the clock is still
+ * counting (or jumping in case of IBSS merge) so we might get
+ * inconsistent values. To avoid this, we read the upper part again
+ * and check it has not been changed. We make the hypothesis that a
+ * maximum of 3 changes can happens in a row (we use 10 as a safe
+ * value).
+ *
+ * Impact on performance is pretty small, since in most cases, only
+ * 3 register reads are needed.
+ */
+
+ tsf_upper1 = ath5k_hw_reg_read(ah, AR5K_TSF_U32);
+ for (i = 0; i < ATH5K_MAX_TSF_READ; i++) {
+ tsf_lower = ath5k_hw_reg_read(ah, AR5K_TSF_L32);
+ tsf_upper2 = ath5k_hw_reg_read(ah, AR5K_TSF_U32);
+ if (tsf_upper2 == tsf_upper1)
+ break;
+ tsf_upper1 = tsf_upper2;
+ }
+
+ local_irq_restore(flags);
+
+ WARN_ON(i == ATH5K_MAX_TSF_READ);
+
+ return ((u64)tsf_upper1 << 32) | tsf_lower;
+}
+
+#undef ATH5K_MAX_TSF_READ
+
+/**
+ * ath5k_hw_set_tsf64() - Set a new 64bit TSF
+ * @ah: The &struct ath5k_hw
+ * @tsf64: The new 64bit TSF
+ *
+ * Sets the new TSF
+ */
+void
+ath5k_hw_set_tsf64(struct ath5k_hw *ah, u64 tsf64)
+{
+ ath5k_hw_reg_write(ah, tsf64 & 0xffffffff, AR5K_TSF_L32);
+ ath5k_hw_reg_write(ah, (tsf64 >> 32) & 0xffffffff, AR5K_TSF_U32);
+}
+
+/**
+ * ath5k_hw_reset_tsf() - Force a TSF reset
+ * @ah: The &struct ath5k_hw
+ *
+ * Forces a TSF reset on PCU
+ */
+void
+ath5k_hw_reset_tsf(struct ath5k_hw *ah)
+{
+ u32 val;
+
+ val = ath5k_hw_reg_read(ah, AR5K_BEACON) | AR5K_BEACON_RESET_TSF;
+
+ /*
+ * Each write to the RESET_TSF bit toggles a hardware internal
+ * signal to reset TSF, but if left high it will cause a TSF reset
+ * on the next chip reset as well. Thus we always write the value
+ * twice to clear the signal.
+ */
+ ath5k_hw_reg_write(ah, val, AR5K_BEACON);
+ ath5k_hw_reg_write(ah, val, AR5K_BEACON);
+}
+
+/**
+ * ath5k_hw_init_beacon_timers() - Initialize beacon timers
+ * @ah: The &struct ath5k_hw
+ * @next_beacon: Next TBTT
+ * @interval: Current beacon interval
+ *
+ * This function is used to initialize beacon timers based on current
+ * operation mode and settings.
+ */
+void
+ath5k_hw_init_beacon_timers(struct ath5k_hw *ah, u32 next_beacon, u32 interval)
+{
+ u32 timer1, timer2, timer3;
+
+ /*
+ * Set the additional timers by mode
+ */
+ switch (ah->opmode) {
+ case NL80211_IFTYPE_MONITOR:
+ case NL80211_IFTYPE_STATION:
+ /* In STA mode timer1 is used as next wakeup
+ * timer and timer2 as next CFP duration start
+ * timer. Both in 1/8TUs. */
+ /* TODO: PCF handling */
+ if (ah->ah_version == AR5K_AR5210) {
+ timer1 = 0xffffffff;
+ timer2 = 0xffffffff;
+ } else {
+ timer1 = 0x0000ffff;
+ timer2 = 0x0007ffff;
+ }
+ /* Mark associated AP as PCF incapable for now */
+ AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, AR5K_STA_ID1_PCF);
+ break;
+ case NL80211_IFTYPE_ADHOC:
+ AR5K_REG_ENABLE_BITS(ah, AR5K_TXCFG, AR5K_TXCFG_ADHOC_BCN_ATIM);
+ fallthrough;
+ default:
+ /* On non-STA modes timer1 is used as next DMA
+ * beacon alert (DBA) timer and timer2 as next
+ * software beacon alert. Both in 1/8TUs. */
+ timer1 = (next_beacon - AR5K_TUNE_DMA_BEACON_RESP) << 3;
+ timer2 = (next_beacon - AR5K_TUNE_SW_BEACON_RESP) << 3;
+ break;
+ }
+
+ /* Timer3 marks the end of our ATIM window
+ * a zero length window is not allowed because
+ * we 'll get no beacons */
+ timer3 = next_beacon + 1;
+
+ /*
+ * Set the beacon register and enable all timers.
+ */
+ /* When in AP or Mesh Point mode zero timer0 to start TSF */
+ if (ah->opmode == NL80211_IFTYPE_AP ||
+ ah->opmode == NL80211_IFTYPE_MESH_POINT)
+ ath5k_hw_reg_write(ah, 0, AR5K_TIMER0);
+
+ ath5k_hw_reg_write(ah, next_beacon, AR5K_TIMER0);
+ ath5k_hw_reg_write(ah, timer1, AR5K_TIMER1);
+ ath5k_hw_reg_write(ah, timer2, AR5K_TIMER2);
+ ath5k_hw_reg_write(ah, timer3, AR5K_TIMER3);
+
+ /* Force a TSF reset if requested and enable beacons */
+ if (interval & AR5K_BEACON_RESET_TSF)
+ ath5k_hw_reset_tsf(ah);
+
+ ath5k_hw_reg_write(ah, interval & (AR5K_BEACON_PERIOD |
+ AR5K_BEACON_ENABLE),
+ AR5K_BEACON);
+
+ /* Flush any pending BMISS interrupts on ISR by
+ * performing a clear-on-write operation on PISR
+ * register for the BMISS bit (writing a bit on
+ * ISR toggles a reset for that bit and leaves
+ * the remaining bits intact) */
+ if (ah->ah_version == AR5K_AR5210)
+ ath5k_hw_reg_write(ah, AR5K_ISR_BMISS, AR5K_ISR);
+ else
+ ath5k_hw_reg_write(ah, AR5K_ISR_BMISS, AR5K_PISR);
+
+ /* TODO: Set enhanced sleep registers on AR5212
+ * based on vif->bss_conf params, until then
+ * disable power save reporting.*/
+ AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, AR5K_STA_ID1_PWR_SV);
+
+}
+
+/**
+ * ath5k_check_timer_win() - Check if timer B is timer A + window
+ * @a: timer a (before b)
+ * @b: timer b (after a)
+ * @window: difference between a and b
+ * @intval: timers are increased by this interval
+ *
+ * This helper function checks if timer B is timer A + window and covers
+ * cases where timer A or B might have already been updated or wrapped
+ * around (Timers are 16 bit).
+ *
+ * Returns true if O.K.
+ */
+static inline bool
+ath5k_check_timer_win(int a, int b, int window, int intval)
+{
+ /*
+ * 1.) usually B should be A + window
+ * 2.) A already updated, B not updated yet
+ * 3.) A already updated and has wrapped around
+ * 4.) B has wrapped around
+ */
+ if ((b - a == window) || /* 1.) */
+ (a - b == intval - window) || /* 2.) */
+ ((a | 0x10000) - b == intval - window) || /* 3.) */
+ ((b | 0x10000) - a == window)) /* 4.) */
+ return true; /* O.K. */
+ return false;
+}
+
+/**
+ * ath5k_hw_check_beacon_timers() - Check if the beacon timers are correct
+ * @ah: The &struct ath5k_hw
+ * @intval: beacon interval
+ *
+ * This is a workaround for IBSS mode
+ *
+ * The need for this function arises from the fact that we have 4 separate
+ * HW timer registers (TIMER0 - TIMER3), which are closely related to the
+ * next beacon target time (NBTT), and that the HW updates these timers
+ * separately based on the current TSF value. The hardware increments each
+ * timer by the beacon interval, when the local TSF converted to TU is equal
+ * to the value stored in the timer.
+ *
+ * The reception of a beacon with the same BSSID can update the local HW TSF
+ * at any time - this is something we can't avoid. If the TSF jumps to a
+ * time which is later than the time stored in a timer, this timer will not
+ * be updated until the TSF in TU wraps around at 16 bit (the size of the
+ * timers) and reaches the time which is stored in the timer.
+ *
+ * The problem is that these timers are closely related to TIMER0 (NBTT) and
+ * that they define a time "window". When the TSF jumps between two timers
+ * (e.g. ATIM and NBTT), the one in the past will be left behind (not
+ * updated), while the one in the future will be updated every beacon
+ * interval. This causes the window to get larger, until the TSF wraps
+ * around as described above and the timer which was left behind gets
+ * updated again. But - because the beacon interval is usually not an exact
+ * divisor of the size of the timers (16 bit), an unwanted "window" between
+ * these timers has developed!
+ *
+ * This is especially important with the ATIM window, because during
+ * the ATIM window only ATIM frames and no data frames are allowed to be
+ * sent, which creates transmission pauses after each beacon. This symptom
+ * has been described as "ramping ping" because ping times increase linearly
+ * for some time and then drop down again. A wrong window on the DMA beacon
+ * timer has the same effect, so we check for these two conditions.
+ *
+ * Returns true if O.K.
+ */
+bool
+ath5k_hw_check_beacon_timers(struct ath5k_hw *ah, int intval)
+{
+ unsigned int nbtt, atim, dma;
+
+ nbtt = ath5k_hw_reg_read(ah, AR5K_TIMER0);
+ atim = ath5k_hw_reg_read(ah, AR5K_TIMER3);
+ dma = ath5k_hw_reg_read(ah, AR5K_TIMER1) >> 3;
+
+ /* NOTE: SWBA is different. Having a wrong window there does not
+ * stop us from sending data and this condition is caught by
+ * other means (SWBA interrupt) */
+
+ if (ath5k_check_timer_win(nbtt, atim, 1, intval) &&
+ ath5k_check_timer_win(dma, nbtt, AR5K_TUNE_DMA_BEACON_RESP,
+ intval))
+ return true; /* O.K. */
+ return false;
+}
+
+/**
+ * ath5k_hw_set_coverage_class() - Set IEEE 802.11 coverage class
+ * @ah: The &struct ath5k_hw
+ * @coverage_class: IEEE 802.11 coverage class number
+ *
+ * Sets IFS intervals and ACK/CTS timeouts for given coverage class.
+ */
+void
+ath5k_hw_set_coverage_class(struct ath5k_hw *ah, u8 coverage_class)
+{
+ /* As defined by IEEE 802.11-2007 17.3.8.6 */
+ int slot_time = ath5k_hw_get_default_slottime(ah) + 3 * coverage_class;
+ int ack_timeout = ath5k_hw_get_default_sifs(ah) + slot_time;
+ int cts_timeout = ack_timeout;
+
+ ath5k_hw_set_ifs_intervals(ah, slot_time);
+ ath5k_hw_set_ack_timeout(ah, ack_timeout);
+ ath5k_hw_set_cts_timeout(ah, cts_timeout);
+
+ ah->ah_coverage_class = coverage_class;
+}
+
+/***************************\
+* Init/Start/Stop functions *
+\***************************/
+
+/**
+ * ath5k_hw_start_rx_pcu() - Start RX engine
+ * @ah: The &struct ath5k_hw
+ *
+ * Starts RX engine on PCU so that hw can process RXed frames
+ * (ACK etc).
+ *
+ * NOTE: RX DMA should be already enabled using ath5k_hw_start_rx_dma
+ */
+void
+ath5k_hw_start_rx_pcu(struct ath5k_hw *ah)
+{
+ AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX);
+}
+
+/**
+ * ath5k_hw_stop_rx_pcu() - Stop RX engine
+ * @ah: The &struct ath5k_hw
+ *
+ * Stops RX engine on PCU
+ */
+void
+ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah)
+{
+ AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX);
+}
+
+/**
+ * ath5k_hw_set_opmode() - Set PCU operating mode
+ * @ah: The &struct ath5k_hw
+ * @op_mode: One of enum nl80211_iftype
+ *
+ * Configure PCU for the various operating modes (AP/STA etc)
+ */
+int
+ath5k_hw_set_opmode(struct ath5k_hw *ah, enum nl80211_iftype op_mode)
+{
+ struct ath_common *common = ath5k_hw_common(ah);
+ u32 pcu_reg, beacon_reg, low_id, high_id;
+
+ ATH5K_DBG(ah, ATH5K_DEBUG_MODE, "mode %d\n", op_mode);
+
+ /* Preserve rest settings */
+ pcu_reg = ath5k_hw_reg_read(ah, AR5K_STA_ID1) & 0xffff0000;
+ pcu_reg &= ~(AR5K_STA_ID1_ADHOC | AR5K_STA_ID1_AP
+ | AR5K_STA_ID1_KEYSRCH_MODE
+ | (ah->ah_version == AR5K_AR5210 ?
+ (AR5K_STA_ID1_PWR_SV | AR5K_STA_ID1_NO_PSPOLL) : 0));
+
+ beacon_reg = 0;
+
+ switch (op_mode) {
+ case NL80211_IFTYPE_ADHOC:
+ pcu_reg |= AR5K_STA_ID1_ADHOC | AR5K_STA_ID1_KEYSRCH_MODE;
+ beacon_reg |= AR5K_BCR_ADHOC;
+ if (ah->ah_version == AR5K_AR5210)
+ pcu_reg |= AR5K_STA_ID1_NO_PSPOLL;
+ else
+ AR5K_REG_ENABLE_BITS(ah, AR5K_CFG, AR5K_CFG_IBSS);
+ break;
+
+ case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_MESH_POINT:
+ pcu_reg |= AR5K_STA_ID1_AP | AR5K_STA_ID1_KEYSRCH_MODE;
+ beacon_reg |= AR5K_BCR_AP;
+ if (ah->ah_version == AR5K_AR5210)
+ pcu_reg |= AR5K_STA_ID1_NO_PSPOLL;
+ else
+ AR5K_REG_DISABLE_BITS(ah, AR5K_CFG, AR5K_CFG_IBSS);
+ break;
+
+ case NL80211_IFTYPE_STATION:
+ pcu_reg |= AR5K_STA_ID1_KEYSRCH_MODE
+ | (ah->ah_version == AR5K_AR5210 ?
+ AR5K_STA_ID1_PWR_SV : 0);
+ fallthrough;
+ case NL80211_IFTYPE_MONITOR:
+ pcu_reg |= AR5K_STA_ID1_KEYSRCH_MODE
+ | (ah->ah_version == AR5K_AR5210 ?
+ AR5K_STA_ID1_NO_PSPOLL : 0);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ /*
+ * Set PCU registers
+ */
+ low_id = get_unaligned_le32(common->macaddr);
+ high_id = get_unaligned_le16(common->macaddr + 4);
+ ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0);
+ ath5k_hw_reg_write(ah, pcu_reg | high_id, AR5K_STA_ID1);
+
+ /*
+ * Set Beacon Control Register on 5210
+ */
+ if (ah->ah_version == AR5K_AR5210)
+ ath5k_hw_reg_write(ah, beacon_reg, AR5K_BCR);
+
+ return 0;
+}
+
+/**
+ * ath5k_hw_pcu_init() - Initialize PCU
+ * @ah: The &struct ath5k_hw
+ * @op_mode: One of enum nl80211_iftype
+ *
+ * This function is used to initialize PCU by setting current
+ * operation mode and various other settings.
+ */
+void
+ath5k_hw_pcu_init(struct ath5k_hw *ah, enum nl80211_iftype op_mode)
+{
+ /* Set bssid and bssid mask */
+ ath5k_hw_set_bssid(ah);
+
+ /* Set PCU config */
+ ath5k_hw_set_opmode(ah, op_mode);
+
+ /* Write rate duration table only on AR5212 and if
+ * virtual interface has already been brought up
+ * XXX: rethink this after new mode changes to
+ * mac80211 are integrated */
+ if (ah->ah_version == AR5K_AR5212 &&
+ ah->nvifs)
+ ath5k_hw_write_rate_duration(ah);
+
+ /* Set RSSI/BRSSI thresholds
+ *
+ * Note: If we decide to set this value
+ * dynamically, have in mind that when AR5K_RSSI_THR
+ * register is read it might return 0x40 if we haven't
+ * wrote anything to it plus BMISS RSSI threshold is zeroed.
+ * So doing a save/restore procedure here isn't the right
+ * choice. Instead store it on ath5k_hw */
+ ath5k_hw_reg_write(ah, (AR5K_TUNE_RSSI_THRES |
+ AR5K_TUNE_BMISS_THRES <<
+ AR5K_RSSI_THR_BMISS_S),
+ AR5K_RSSI_THR);
+
+ /* MIC QoS support */
+ if (ah->ah_mac_srev >= AR5K_SREV_AR2413) {
+ ath5k_hw_reg_write(ah, 0x000100aa, AR5K_MIC_QOS_CTL);
+ ath5k_hw_reg_write(ah, 0x00003210, AR5K_MIC_QOS_SEL);
+ }
+
+ /* QoS NOACK Policy */
+ if (ah->ah_version == AR5K_AR5212) {
+ ath5k_hw_reg_write(ah,
+ AR5K_REG_SM(2, AR5K_QOS_NOACK_2BIT_VALUES) |
+ AR5K_REG_SM(5, AR5K_QOS_NOACK_BIT_OFFSET) |
+ AR5K_REG_SM(0, AR5K_QOS_NOACK_BYTE_OFFSET),
+ AR5K_QOS_NOACK);
+ }
+
+ /* Restore slot time and ACK timeouts */
+ if (ah->ah_coverage_class > 0)
+ ath5k_hw_set_coverage_class(ah, ah->ah_coverage_class);
+
+ /* Set ACK bitrate mode (see ack_rates_high) */
+ if (ah->ah_version == AR5K_AR5212) {
+ u32 val = AR5K_STA_ID1_BASE_RATE_11B | AR5K_STA_ID1_ACKCTS_6MB;
+ if (ah->ah_ack_bitrate_high)
+ AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, val);
+ else
+ AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, val);
+ }
+ return;
+}
diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
new file mode 100644
index 000000000..5797ef9c7
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -0,0 +1,3961 @@
+/*
+ * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2009 Nick Kossifidis <mickflemm@gmail.com>
+ * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com>
+ * Copyright (c) 2008-2009 Felix Fietkau <nbd@openwrt.org>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/***********************\
+* PHY related functions *
+\***********************/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <asm/unaligned.h>
+
+#include "ath5k.h"
+#include "reg.h"
+#include "rfbuffer.h"
+#include "rfgain.h"
+#include "../regd.h"
+
+
+/**
+ * DOC: PHY related functions
+ *
+ * Here we handle the low-level functions related to baseband
+ * and analog frontend (RF) parts. This is by far the most complex
+ * part of the hw code so make sure you know what you are doing.
+ *
+ * Here is a list of what this is all about:
+ *
+ * - Channel setting/switching
+ *
+ * - Automatic Gain Control (AGC) calibration
+ *
+ * - Noise Floor calibration
+ *
+ * - I/Q imbalance calibration (QAM correction)
+ *
+ * - Calibration due to thermal changes (gain_F)
+ *
+ * - Spur noise mitigation
+ *
+ * - RF/PHY initialization for the various operating modes and bwmodes
+ *
+ * - Antenna control
+ *
+ * - TX power control per channel/rate/packet type
+ *
+ * Also have in mind we never got documentation for most of these
+ * functions, what we have comes mostly from Atheros's code, reverse
+ * engineering and patent docs/presentations etc.
+ */
+
+
+/******************\
+* Helper functions *
+\******************/
+
+/**
+ * ath5k_hw_radio_revision() - Get the PHY Chip revision
+ * @ah: The &struct ath5k_hw
+ * @band: One of enum nl80211_band
+ *
+ * Returns the revision number of a 2GHz, 5GHz or single chip
+ * radio.
+ */
+u16
+ath5k_hw_radio_revision(struct ath5k_hw *ah, enum nl80211_band band)
+{
+ unsigned int i;
+ u32 srev;
+ u16 ret;
+
+ /*
+ * Set the radio chip access register
+ */
+ switch (band) {
+ case NL80211_BAND_2GHZ:
+ ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_2GHZ, AR5K_PHY(0));
+ break;
+ case NL80211_BAND_5GHZ:
+ ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0));
+ break;
+ default:
+ return 0;
+ }
+
+ usleep_range(2000, 2500);
+
+ /* ...wait until PHY is ready and read the selected radio revision */
+ ath5k_hw_reg_write(ah, 0x00001c16, AR5K_PHY(0x34));
+
+ for (i = 0; i < 8; i++)
+ ath5k_hw_reg_write(ah, 0x00010000, AR5K_PHY(0x20));
+
+ if (ah->ah_version == AR5K_AR5210) {
+ srev = (ath5k_hw_reg_read(ah, AR5K_PHY(256)) >> 28) & 0xf;
+ ret = (u16)ath5k_hw_bitswap(srev, 4) + 1;
+ } else {
+ srev = (ath5k_hw_reg_read(ah, AR5K_PHY(0x100)) >> 24) & 0xff;
+ ret = (u16)ath5k_hw_bitswap(((srev & 0xf0) >> 4) |
+ ((srev & 0x0f) << 4), 8);
+ }
+
+ /* Reset to the 5GHz mode */
+ ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0));
+
+ return ret;
+}
+
+/**
+ * ath5k_channel_ok() - Check if a channel is supported by the hw
+ * @ah: The &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
+ *
+ * Note: We don't do any regulatory domain checks here, it's just
+ * a sanity check.
+ */
+bool
+ath5k_channel_ok(struct ath5k_hw *ah, struct ieee80211_channel *channel)
+{
+ u16 freq = channel->center_freq;
+
+ /* Check if the channel is in our supported range */
+ if (channel->band == NL80211_BAND_2GHZ) {
+ if ((freq >= ah->ah_capabilities.cap_range.range_2ghz_min) &&
+ (freq <= ah->ah_capabilities.cap_range.range_2ghz_max))
+ return true;
+ } else if (channel->band == NL80211_BAND_5GHZ)
+ if ((freq >= ah->ah_capabilities.cap_range.range_5ghz_min) &&
+ (freq <= ah->ah_capabilities.cap_range.range_5ghz_max))
+ return true;
+
+ return false;
+}
+
+/**
+ * ath5k_hw_chan_has_spur_noise() - Check if channel is sensitive to spur noise
+ * @ah: The &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
+ */
+bool
+ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel)
+{
+ u8 refclk_freq;
+
+ if ((ah->ah_radio == AR5K_RF5112) ||
+ (ah->ah_radio == AR5K_RF5413) ||
+ (ah->ah_radio == AR5K_RF2413) ||
+ (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4)))
+ refclk_freq = 40;
+ else
+ refclk_freq = 32;
+
+ if ((channel->center_freq % refclk_freq != 0) &&
+ ((channel->center_freq % refclk_freq < 10) ||
+ (channel->center_freq % refclk_freq > 22)))
+ return true;
+ else
+ return false;
+}
+
+/**
+ * ath5k_hw_rfb_op() - Perform an operation on the given RF Buffer
+ * @ah: The &struct ath5k_hw
+ * @rf_regs: The struct ath5k_rf_reg
+ * @val: New value
+ * @reg_id: RF register ID
+ * @set: Indicate we need to swap data
+ *
+ * This is an internal function used to modify RF Banks before
+ * writing them to AR5K_RF_BUFFER. Check out rfbuffer.h for more
+ * infos.
+ */
+static unsigned int
+ath5k_hw_rfb_op(struct ath5k_hw *ah, const struct ath5k_rf_reg *rf_regs,
+ u32 val, u8 reg_id, bool set)
+{
+ const struct ath5k_rf_reg *rfreg = NULL;
+ u8 offset, bank, num_bits, col, position;
+ u16 entry;
+ u32 mask, data, last_bit, bits_shifted, first_bit;
+ u32 *rfb;
+ s32 bits_left;
+ int i;
+
+ data = 0;
+ rfb = ah->ah_rf_banks;
+
+ for (i = 0; i < ah->ah_rf_regs_count; i++) {
+ if (rf_regs[i].index == reg_id) {
+ rfreg = &rf_regs[i];
+ break;
+ }
+ }
+
+ if (rfb == NULL || rfreg == NULL) {
+ ATH5K_PRINTF("Rf register not found!\n");
+ /* should not happen */
+ return 0;
+ }
+
+ bank = rfreg->bank;
+ num_bits = rfreg->field.len;
+ first_bit = rfreg->field.pos;
+ col = rfreg->field.col;
+
+ /* first_bit is an offset from bank's
+ * start. Since we have all banks on
+ * the same array, we use this offset
+ * to mark each bank's start */
+ offset = ah->ah_offset[bank];
+
+ /* Boundary check */
+ if (!(col <= 3 && num_bits <= 32 && first_bit + num_bits <= 319)) {
+ ATH5K_PRINTF("invalid values at offset %u\n", offset);
+ return 0;
+ }
+
+ entry = ((first_bit - 1) / 8) + offset;
+ position = (first_bit - 1) % 8;
+
+ if (set)
+ data = ath5k_hw_bitswap(val, num_bits);
+
+ for (bits_shifted = 0, bits_left = num_bits; bits_left > 0;
+ position = 0, entry++) {
+
+ last_bit = (position + bits_left > 8) ? 8 :
+ position + bits_left;
+
+ mask = (((1 << last_bit) - 1) ^ ((1 << position) - 1)) <<
+ (col * 8);
+
+ if (set) {
+ rfb[entry] &= ~mask;
+ rfb[entry] |= ((data << position) << (col * 8)) & mask;
+ data >>= (8 - position);
+ } else {
+ data |= (((rfb[entry] & mask) >> (col * 8)) >> position)
+ << bits_shifted;
+ bits_shifted += last_bit - position;
+ }
+
+ bits_left -= 8 - position;
+ }
+
+ data = set ? 1 : ath5k_hw_bitswap(data, num_bits);
+
+ return data;
+}
+
+/**
+ * ath5k_hw_write_ofdm_timings() - set OFDM timings on AR5212
+ * @ah: the &struct ath5k_hw
+ * @channel: the currently set channel upon reset
+ *
+ * Write the delta slope coefficient (used on pilot tracking ?) for OFDM
+ * operation on the AR5212 upon reset. This is a helper for ath5k_hw_phy_init.
+ *
+ * Since delta slope is floating point we split it on its exponent and
+ * mantissa and provide these values on hw.
+ *
+ * For more infos i think this patent is related
+ * "http://www.freepatentsonline.com/7184495.html"
+ */
+static inline int
+ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel)
+{
+ /* Get exponent and mantissa and set it */
+ u32 coef_scaled, coef_exp, coef_man,
+ ds_coef_exp, ds_coef_man, clock;
+
+ BUG_ON(!(ah->ah_version == AR5K_AR5212) ||
+ (channel->hw_value == AR5K_MODE_11B));
+
+ /* Get coefficient
+ * ALGO: coef = (5 * clock / carrier_freq) / 2
+ * we scale coef by shifting clock value by 24 for
+ * better precision since we use integers */
+ switch (ah->ah_bwmode) {
+ case AR5K_BWMODE_40MHZ:
+ clock = 40 * 2;
+ break;
+ case AR5K_BWMODE_10MHZ:
+ clock = 40 / 2;
+ break;
+ case AR5K_BWMODE_5MHZ:
+ clock = 40 / 4;
+ break;
+ default:
+ clock = 40;
+ break;
+ }
+ coef_scaled = ((5 * (clock << 24)) / 2) / channel->center_freq;
+
+ /* Get exponent
+ * ALGO: coef_exp = 14 - highest set bit position */
+ coef_exp = ilog2(coef_scaled);
+
+ /* Doesn't make sense if it's zero*/
+ if (!coef_scaled || !coef_exp)
+ return -EINVAL;
+
+ /* Note: we've shifted coef_scaled by 24 */
+ coef_exp = 14 - (coef_exp - 24);
+
+
+ /* Get mantissa (significant digits)
+ * ALGO: coef_mant = floor(coef_scaled* 2^coef_exp+0.5) */
+ coef_man = coef_scaled +
+ (1 << (24 - coef_exp - 1));
+
+ /* Calculate delta slope coefficient exponent
+ * and mantissa (remove scaling) and set them on hw */
+ ds_coef_man = coef_man >> (24 - coef_exp);
+ ds_coef_exp = coef_exp - 16;
+
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3,
+ AR5K_PHY_TIMING_3_DSC_MAN, ds_coef_man);
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3,
+ AR5K_PHY_TIMING_3_DSC_EXP, ds_coef_exp);
+
+ return 0;
+}
+
+/**
+ * ath5k_hw_phy_disable() - Disable PHY
+ * @ah: The &struct ath5k_hw
+ */
+int ath5k_hw_phy_disable(struct ath5k_hw *ah)
+{
+ /*Just a try M.F.*/
+ ath5k_hw_reg_write(ah, AR5K_PHY_ACT_DISABLE, AR5K_PHY_ACT);
+
+ return 0;
+}
+
+/**
+ * ath5k_hw_wait_for_synth() - Wait for synth to settle
+ * @ah: The &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
+ */
+static void
+ath5k_hw_wait_for_synth(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel)
+{
+ /*
+ * On 5211+ read activation -> rx delay
+ * and use it (100ns steps).
+ */
+ if (ah->ah_version != AR5K_AR5210) {
+ u32 delay;
+ delay = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) &
+ AR5K_PHY_RX_DELAY_M;
+ delay = (channel->hw_value == AR5K_MODE_11B) ?
+ ((delay << 2) / 22) : (delay / 10);
+ if (ah->ah_bwmode == AR5K_BWMODE_10MHZ)
+ delay = delay << 1;
+ if (ah->ah_bwmode == AR5K_BWMODE_5MHZ)
+ delay = delay << 2;
+ /* XXX: /2 on turbo ? Let's be safe
+ * for now */
+ usleep_range(100 + delay, 100 + (2 * delay));
+ } else {
+ usleep_range(1000, 1500);
+ }
+}
+
+
+/**********************\
+* RF Gain optimization *
+\**********************/
+
+/**
+ * DOC: RF Gain optimization
+ *
+ * This code is used to optimize RF gain on different environments
+ * (temperature mostly) based on feedback from a power detector.
+ *
+ * It's only used on RF5111 and RF5112, later RF chips seem to have
+ * auto adjustment on hw -notice they have a much smaller BANK 7 and
+ * no gain optimization ladder-.
+ *
+ * For more infos check out this patent doc
+ * "http://www.freepatentsonline.com/7400691.html"
+ *
+ * This paper describes power drops as seen on the receiver due to
+ * probe packets
+ * "http://www.cnri.dit.ie/publications/ICT08%20-%20Practical%20Issues
+ * %20of%20Power%20Control.pdf"
+ *
+ * And this is the MadWiFi bug entry related to the above
+ * "http://madwifi-project.org/ticket/1659"
+ * with various measurements and diagrams
+ */
+
+/**
+ * ath5k_hw_rfgain_opt_init() - Initialize ah_gain during attach
+ * @ah: The &struct ath5k_hw
+ */
+int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah)
+{
+ /* Initialize the gain optimization values */
+ switch (ah->ah_radio) {
+ case AR5K_RF5111:
+ ah->ah_gain.g_step_idx = rfgain_opt_5111.go_default;
+ ah->ah_gain.g_low = 20;
+ ah->ah_gain.g_high = 35;
+ ah->ah_gain.g_state = AR5K_RFGAIN_ACTIVE;
+ break;
+ case AR5K_RF5112:
+ ah->ah_gain.g_step_idx = rfgain_opt_5112.go_default;
+ ah->ah_gain.g_low = 20;
+ ah->ah_gain.g_high = 85;
+ ah->ah_gain.g_state = AR5K_RFGAIN_ACTIVE;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/**
+ * ath5k_hw_request_rfgain_probe() - Request a PAPD probe packet
+ * @ah: The &struct ath5k_hw
+ *
+ * Schedules a gain probe check on the next transmitted packet.
+ * That means our next packet is going to be sent with lower
+ * tx power and a Peak to Average Power Detector (PAPD) will try
+ * to measure the gain.
+ *
+ * TODO: Force a tx packet (bypassing PCU arbitrator etc)
+ * just after we enable the probe so that we don't mess with
+ * standard traffic.
+ */
+static void
+ath5k_hw_request_rfgain_probe(struct ath5k_hw *ah)
+{
+
+ /* Skip if gain calibration is inactive or
+ * we already handle a probe request */
+ if (ah->ah_gain.g_state != AR5K_RFGAIN_ACTIVE)
+ return;
+
+ /* Send the packet with 2dB below max power as
+ * patent doc suggest */
+ ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txpower.txp_ofdm - 4,
+ AR5K_PHY_PAPD_PROBE_TXPOWER) |
+ AR5K_PHY_PAPD_PROBE_TX_NEXT, AR5K_PHY_PAPD_PROBE);
+
+ ah->ah_gain.g_state = AR5K_RFGAIN_READ_REQUESTED;
+
+}
+
+/**
+ * ath5k_hw_rf_gainf_corr() - Calculate Gain_F measurement correction
+ * @ah: The &struct ath5k_hw
+ *
+ * Calculate Gain_F measurement correction
+ * based on the current step for RF5112 rev. 2
+ */
+static u32
+ath5k_hw_rf_gainf_corr(struct ath5k_hw *ah)
+{
+ u32 mix, step;
+ const struct ath5k_gain_opt *go;
+ const struct ath5k_gain_opt_step *g_step;
+ const struct ath5k_rf_reg *rf_regs;
+
+ /* Only RF5112 Rev. 2 supports it */
+ if ((ah->ah_radio != AR5K_RF5112) ||
+ (ah->ah_radio_5ghz_revision <= AR5K_SREV_RAD_5112A))
+ return 0;
+
+ go = &rfgain_opt_5112;
+ rf_regs = rf_regs_5112a;
+ ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_5112a);
+
+ g_step = &go->go_step[ah->ah_gain.g_step_idx];
+
+ if (ah->ah_rf_banks == NULL)
+ return 0;
+
+ ah->ah_gain.g_f_corr = 0;
+
+ /* No VGA (Variable Gain Amplifier) override, skip */
+ if (ath5k_hw_rfb_op(ah, rf_regs, 0, AR5K_RF_MIXVGA_OVR, false) != 1)
+ return 0;
+
+ /* Mix gain stepping */
+ step = ath5k_hw_rfb_op(ah, rf_regs, 0, AR5K_RF_MIXGAIN_STEP, false);
+
+ /* Mix gain override */
+ mix = g_step->gos_param[0];
+
+ switch (mix) {
+ case 3:
+ ah->ah_gain.g_f_corr = step * 2;
+ break;
+ case 2:
+ ah->ah_gain.g_f_corr = (step - 5) * 2;
+ break;
+ case 1:
+ ah->ah_gain.g_f_corr = step;
+ break;
+ default:
+ ah->ah_gain.g_f_corr = 0;
+ break;
+ }
+
+ return ah->ah_gain.g_f_corr;
+}
+
+/**
+ * ath5k_hw_rf_check_gainf_readback() - Validate Gain_F feedback from detector
+ * @ah: The &struct ath5k_hw
+ *
+ * Check if current gain_F measurement is in the range of our
+ * power detector windows. If we get a measurement outside range
+ * we know it's not accurate (detectors can't measure anything outside
+ * their detection window) so we must ignore it.
+ *
+ * Returns true if readback was O.K. or false on failure
+ */
+static bool
+ath5k_hw_rf_check_gainf_readback(struct ath5k_hw *ah)
+{
+ const struct ath5k_rf_reg *rf_regs;
+ u32 step, mix_ovr, level[4];
+
+ if (ah->ah_rf_banks == NULL)
+ return false;
+
+ if (ah->ah_radio == AR5K_RF5111) {
+
+ rf_regs = rf_regs_5111;
+ ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_5111);
+
+ step = ath5k_hw_rfb_op(ah, rf_regs, 0, AR5K_RF_RFGAIN_STEP,
+ false);
+
+ level[0] = 0;
+ level[1] = (step == 63) ? 50 : step + 4;
+ level[2] = (step != 63) ? 64 : level[0];
+ level[3] = level[2] + 50;
+
+ ah->ah_gain.g_high = level[3] -
+ (step == 63 ? AR5K_GAIN_DYN_ADJUST_HI_MARGIN : -5);
+ ah->ah_gain.g_low = level[0] +
+ (step == 63 ? AR5K_GAIN_DYN_ADJUST_LO_MARGIN : 0);
+ } else {
+
+ rf_regs = rf_regs_5112;
+ ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_5112);
+
+ mix_ovr = ath5k_hw_rfb_op(ah, rf_regs, 0, AR5K_RF_MIXVGA_OVR,
+ false);
+
+ level[0] = level[2] = 0;
+
+ if (mix_ovr == 1) {
+ level[1] = level[3] = 83;
+ } else {
+ level[1] = level[3] = 107;
+ ah->ah_gain.g_high = 55;
+ }
+ }
+
+ return (ah->ah_gain.g_current >= level[0] &&
+ ah->ah_gain.g_current <= level[1]) ||
+ (ah->ah_gain.g_current >= level[2] &&
+ ah->ah_gain.g_current <= level[3]);
+}
+
+/**
+ * ath5k_hw_rf_gainf_adjust() - Perform Gain_F adjustment
+ * @ah: The &struct ath5k_hw
+ *
+ * Choose the right target gain based on current gain
+ * and RF gain optimization ladder
+ */
+static s8
+ath5k_hw_rf_gainf_adjust(struct ath5k_hw *ah)
+{
+ const struct ath5k_gain_opt *go;
+ const struct ath5k_gain_opt_step *g_step;
+ int ret = 0;
+
+ switch (ah->ah_radio) {
+ case AR5K_RF5111:
+ go = &rfgain_opt_5111;
+ break;
+ case AR5K_RF5112:
+ go = &rfgain_opt_5112;
+ break;
+ default:
+ return 0;
+ }
+
+ g_step = &go->go_step[ah->ah_gain.g_step_idx];
+
+ if (ah->ah_gain.g_current >= ah->ah_gain.g_high) {
+
+ /* Reached maximum */
+ if (ah->ah_gain.g_step_idx == 0)
+ return -1;
+
+ for (ah->ah_gain.g_target = ah->ah_gain.g_current;
+ ah->ah_gain.g_target >= ah->ah_gain.g_high &&
+ ah->ah_gain.g_step_idx > 0;
+ g_step = &go->go_step[ah->ah_gain.g_step_idx])
+ ah->ah_gain.g_target -= 2 *
+ (go->go_step[--(ah->ah_gain.g_step_idx)].gos_gain -
+ g_step->gos_gain);
+
+ ret = 1;
+ goto done;
+ }
+
+ if (ah->ah_gain.g_current <= ah->ah_gain.g_low) {
+
+ /* Reached minimum */
+ if (ah->ah_gain.g_step_idx == (go->go_steps_count - 1))
+ return -2;
+
+ for (ah->ah_gain.g_target = ah->ah_gain.g_current;
+ ah->ah_gain.g_target <= ah->ah_gain.g_low &&
+ ah->ah_gain.g_step_idx < go->go_steps_count - 1;
+ g_step = &go->go_step[ah->ah_gain.g_step_idx])
+ ah->ah_gain.g_target -= 2 *
+ (go->go_step[++ah->ah_gain.g_step_idx].gos_gain -
+ g_step->gos_gain);
+
+ ret = 2;
+ goto done;
+ }
+
+done:
+ ATH5K_DBG(ah, ATH5K_DEBUG_CALIBRATE,
+ "ret %d, gain step %u, current gain %u, target gain %u\n",
+ ret, ah->ah_gain.g_step_idx, ah->ah_gain.g_current,
+ ah->ah_gain.g_target);
+
+ return ret;
+}
+
+/**
+ * ath5k_hw_gainf_calibrate() - Do a gain_F calibration
+ * @ah: The &struct ath5k_hw
+ *
+ * Main callback for thermal RF gain calibration engine
+ * Check for a new gain reading and schedule an adjustment
+ * if needed.
+ *
+ * Returns one of enum ath5k_rfgain codes
+ */
+enum ath5k_rfgain
+ath5k_hw_gainf_calibrate(struct ath5k_hw *ah)
+{
+ u32 data, type;
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+
+ if (ah->ah_rf_banks == NULL ||
+ ah->ah_gain.g_state == AR5K_RFGAIN_INACTIVE)
+ return AR5K_RFGAIN_INACTIVE;
+
+ /* No check requested, either engine is inactive
+ * or an adjustment is already requested */
+ if (ah->ah_gain.g_state != AR5K_RFGAIN_READ_REQUESTED)
+ goto done;
+
+ /* Read the PAPD (Peak to Average Power Detector)
+ * register */
+ data = ath5k_hw_reg_read(ah, AR5K_PHY_PAPD_PROBE);
+
+ /* No probe is scheduled, read gain_F measurement */
+ if (!(data & AR5K_PHY_PAPD_PROBE_TX_NEXT)) {
+ ah->ah_gain.g_current = data >> AR5K_PHY_PAPD_PROBE_GAINF_S;
+ type = AR5K_REG_MS(data, AR5K_PHY_PAPD_PROBE_TYPE);
+
+ /* If tx packet is CCK correct the gain_F measurement
+ * by cck ofdm gain delta */
+ if (type == AR5K_PHY_PAPD_PROBE_TYPE_CCK) {
+ if (ah->ah_radio_5ghz_revision >= AR5K_SREV_RAD_5112A)
+ ah->ah_gain.g_current +=
+ ee->ee_cck_ofdm_gain_delta;
+ else
+ ah->ah_gain.g_current +=
+ AR5K_GAIN_CCK_PROBE_CORR;
+ }
+
+ /* Further correct gain_F measurement for
+ * RF5112A radios */
+ if (ah->ah_radio_5ghz_revision >= AR5K_SREV_RAD_5112A) {
+ ath5k_hw_rf_gainf_corr(ah);
+ ah->ah_gain.g_current =
+ ah->ah_gain.g_current >= ah->ah_gain.g_f_corr ?
+ (ah->ah_gain.g_current - ah->ah_gain.g_f_corr) :
+ 0;
+ }
+
+ /* Check if measurement is ok and if we need
+ * to adjust gain, schedule a gain adjustment,
+ * else switch back to the active state */
+ if (ath5k_hw_rf_check_gainf_readback(ah) &&
+ AR5K_GAIN_CHECK_ADJUST(&ah->ah_gain) &&
+ ath5k_hw_rf_gainf_adjust(ah)) {
+ ah->ah_gain.g_state = AR5K_RFGAIN_NEED_CHANGE;
+ } else {
+ ah->ah_gain.g_state = AR5K_RFGAIN_ACTIVE;
+ }
+ }
+
+done:
+ return ah->ah_gain.g_state;
+}
+
+/**
+ * ath5k_hw_rfgain_init() - Write initial RF gain settings to hw
+ * @ah: The &struct ath5k_hw
+ * @band: One of enum nl80211_band
+ *
+ * Write initial RF gain table to set the RF sensitivity.
+ *
+ * NOTE: This one works on all RF chips and has nothing to do
+ * with Gain_F calibration
+ */
+static int
+ath5k_hw_rfgain_init(struct ath5k_hw *ah, enum nl80211_band band)
+{
+ const struct ath5k_ini_rfgain *ath5k_rfg;
+ unsigned int i, size, index;
+
+ switch (ah->ah_radio) {
+ case AR5K_RF5111:
+ ath5k_rfg = rfgain_5111;
+ size = ARRAY_SIZE(rfgain_5111);
+ break;
+ case AR5K_RF5112:
+ ath5k_rfg = rfgain_5112;
+ size = ARRAY_SIZE(rfgain_5112);
+ break;
+ case AR5K_RF2413:
+ ath5k_rfg = rfgain_2413;
+ size = ARRAY_SIZE(rfgain_2413);
+ break;
+ case AR5K_RF2316:
+ ath5k_rfg = rfgain_2316;
+ size = ARRAY_SIZE(rfgain_2316);
+ break;
+ case AR5K_RF5413:
+ ath5k_rfg = rfgain_5413;
+ size = ARRAY_SIZE(rfgain_5413);
+ break;
+ case AR5K_RF2317:
+ case AR5K_RF2425:
+ ath5k_rfg = rfgain_2425;
+ size = ARRAY_SIZE(rfgain_2425);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ index = (band == NL80211_BAND_2GHZ) ? 1 : 0;
+
+ for (i = 0; i < size; i++) {
+ AR5K_REG_WAIT(i);
+ ath5k_hw_reg_write(ah, ath5k_rfg[i].rfg_value[index],
+ (u32)ath5k_rfg[i].rfg_register);
+ }
+
+ return 0;
+}
+
+
+/********************\
+* RF Registers setup *
+\********************/
+
+/**
+ * ath5k_hw_rfregs_init() - Initialize RF register settings
+ * @ah: The &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
+ * @mode: One of enum ath5k_driver_mode
+ *
+ * Setup RF registers by writing RF buffer on hw. For
+ * more infos on this, check out rfbuffer.h
+ */
+static int
+ath5k_hw_rfregs_init(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel,
+ unsigned int mode)
+{
+ const struct ath5k_rf_reg *rf_regs;
+ const struct ath5k_ini_rfbuffer *ini_rfb;
+ const struct ath5k_gain_opt *go = NULL;
+ const struct ath5k_gain_opt_step *g_step;
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ u8 ee_mode = 0;
+ u32 *rfb;
+ int i, obdb = -1, bank = -1;
+
+ switch (ah->ah_radio) {
+ case AR5K_RF5111:
+ rf_regs = rf_regs_5111;
+ ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_5111);
+ ini_rfb = rfb_5111;
+ ah->ah_rf_banks_size = ARRAY_SIZE(rfb_5111);
+ go = &rfgain_opt_5111;
+ break;
+ case AR5K_RF5112:
+ if (ah->ah_radio_5ghz_revision >= AR5K_SREV_RAD_5112A) {
+ rf_regs = rf_regs_5112a;
+ ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_5112a);
+ ini_rfb = rfb_5112a;
+ ah->ah_rf_banks_size = ARRAY_SIZE(rfb_5112a);
+ } else {
+ rf_regs = rf_regs_5112;
+ ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_5112);
+ ini_rfb = rfb_5112;
+ ah->ah_rf_banks_size = ARRAY_SIZE(rfb_5112);
+ }
+ go = &rfgain_opt_5112;
+ break;
+ case AR5K_RF2413:
+ rf_regs = rf_regs_2413;
+ ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_2413);
+ ini_rfb = rfb_2413;
+ ah->ah_rf_banks_size = ARRAY_SIZE(rfb_2413);
+ break;
+ case AR5K_RF2316:
+ rf_regs = rf_regs_2316;
+ ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_2316);
+ ini_rfb = rfb_2316;
+ ah->ah_rf_banks_size = ARRAY_SIZE(rfb_2316);
+ break;
+ case AR5K_RF5413:
+ rf_regs = rf_regs_5413;
+ ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_5413);
+ ini_rfb = rfb_5413;
+ ah->ah_rf_banks_size = ARRAY_SIZE(rfb_5413);
+ break;
+ case AR5K_RF2317:
+ rf_regs = rf_regs_2425;
+ ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_2425);
+ ini_rfb = rfb_2317;
+ ah->ah_rf_banks_size = ARRAY_SIZE(rfb_2317);
+ break;
+ case AR5K_RF2425:
+ rf_regs = rf_regs_2425;
+ ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_2425);
+ if (ah->ah_mac_srev < AR5K_SREV_AR2417) {
+ ini_rfb = rfb_2425;
+ ah->ah_rf_banks_size = ARRAY_SIZE(rfb_2425);
+ } else {
+ ini_rfb = rfb_2417;
+ ah->ah_rf_banks_size = ARRAY_SIZE(rfb_2417);
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* If it's the first time we set RF buffer, allocate
+ * ah->ah_rf_banks based on ah->ah_rf_banks_size
+ * we set above */
+ if (ah->ah_rf_banks == NULL) {
+ ah->ah_rf_banks = kmalloc_array(ah->ah_rf_banks_size,
+ sizeof(u32),
+ GFP_KERNEL);
+ if (ah->ah_rf_banks == NULL) {
+ ATH5K_ERR(ah, "out of memory\n");
+ return -ENOMEM;
+ }
+ }
+
+ /* Copy values to modify them */
+ rfb = ah->ah_rf_banks;
+
+ for (i = 0; i < ah->ah_rf_banks_size; i++) {
+ if (ini_rfb[i].rfb_bank >= AR5K_MAX_RF_BANKS) {
+ ATH5K_ERR(ah, "invalid bank\n");
+ return -EINVAL;
+ }
+
+ /* Bank changed, write down the offset */
+ if (bank != ini_rfb[i].rfb_bank) {
+ bank = ini_rfb[i].rfb_bank;
+ ah->ah_offset[bank] = i;
+ }
+
+ rfb[i] = ini_rfb[i].rfb_mode_data[mode];
+ }
+
+ /* Set Output and Driver bias current (OB/DB) */
+ if (channel->band == NL80211_BAND_2GHZ) {
+
+ if (channel->hw_value == AR5K_MODE_11B)
+ ee_mode = AR5K_EEPROM_MODE_11B;
+ else
+ ee_mode = AR5K_EEPROM_MODE_11G;
+
+ /* For RF511X/RF211X combination we
+ * use b_OB and b_DB parameters stored
+ * in eeprom on ee->ee_ob[ee_mode][0]
+ *
+ * For all other chips we use OB/DB for 2GHz
+ * stored in the b/g modal section just like
+ * 802.11a on ee->ee_ob[ee_mode][1] */
+ if ((ah->ah_radio == AR5K_RF5111) ||
+ (ah->ah_radio == AR5K_RF5112))
+ obdb = 0;
+ else
+ obdb = 1;
+
+ ath5k_hw_rfb_op(ah, rf_regs, ee->ee_ob[ee_mode][obdb],
+ AR5K_RF_OB_2GHZ, true);
+
+ ath5k_hw_rfb_op(ah, rf_regs, ee->ee_db[ee_mode][obdb],
+ AR5K_RF_DB_2GHZ, true);
+
+ /* RF5111 always needs OB/DB for 5GHz, even if we use 2GHz */
+ } else if ((channel->band == NL80211_BAND_5GHZ) ||
+ (ah->ah_radio == AR5K_RF5111)) {
+
+ /* For 11a, Turbo and XR we need to choose
+ * OB/DB based on frequency range */
+ ee_mode = AR5K_EEPROM_MODE_11A;
+ obdb = channel->center_freq >= 5725 ? 3 :
+ (channel->center_freq >= 5500 ? 2 :
+ (channel->center_freq >= 5260 ? 1 :
+ (channel->center_freq > 4000 ? 0 : -1)));
+
+ if (obdb < 0)
+ return -EINVAL;
+
+ ath5k_hw_rfb_op(ah, rf_regs, ee->ee_ob[ee_mode][obdb],
+ AR5K_RF_OB_5GHZ, true);
+
+ ath5k_hw_rfb_op(ah, rf_regs, ee->ee_db[ee_mode][obdb],
+ AR5K_RF_DB_5GHZ, true);
+ }
+
+ g_step = &go->go_step[ah->ah_gain.g_step_idx];
+
+ /* Set turbo mode (N/A on RF5413) */
+ if ((ah->ah_bwmode == AR5K_BWMODE_40MHZ) &&
+ (ah->ah_radio != AR5K_RF5413))
+ ath5k_hw_rfb_op(ah, rf_regs, 1, AR5K_RF_TURBO, false);
+
+ /* Bank Modifications (chip-specific) */
+ if (ah->ah_radio == AR5K_RF5111) {
+
+ /* Set gain_F settings according to current step */
+ if (channel->hw_value != AR5K_MODE_11B) {
+
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_FRAME_CTL,
+ AR5K_PHY_FRAME_CTL_TX_CLIP,
+ g_step->gos_param[0]);
+
+ ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[1],
+ AR5K_RF_PWD_90, true);
+
+ ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[2],
+ AR5K_RF_PWD_84, true);
+
+ ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[3],
+ AR5K_RF_RFGAIN_SEL, true);
+
+ /* We programmed gain_F parameters, switch back
+ * to active state */
+ ah->ah_gain.g_state = AR5K_RFGAIN_ACTIVE;
+
+ }
+
+ /* Bank 6/7 setup */
+
+ ath5k_hw_rfb_op(ah, rf_regs, !ee->ee_xpd[ee_mode],
+ AR5K_RF_PWD_XPD, true);
+
+ ath5k_hw_rfb_op(ah, rf_regs, ee->ee_x_gain[ee_mode],
+ AR5K_RF_XPD_GAIN, true);
+
+ ath5k_hw_rfb_op(ah, rf_regs, ee->ee_i_gain[ee_mode],
+ AR5K_RF_GAIN_I, true);
+
+ ath5k_hw_rfb_op(ah, rf_regs, ee->ee_xpd[ee_mode],
+ AR5K_RF_PLO_SEL, true);
+
+ /* Tweak power detectors for half/quarter rate support */
+ if (ah->ah_bwmode == AR5K_BWMODE_5MHZ ||
+ ah->ah_bwmode == AR5K_BWMODE_10MHZ) {
+ u8 wait_i;
+
+ ath5k_hw_rfb_op(ah, rf_regs, 0x1f,
+ AR5K_RF_WAIT_S, true);
+
+ wait_i = (ah->ah_bwmode == AR5K_BWMODE_5MHZ) ?
+ 0x1f : 0x10;
+
+ ath5k_hw_rfb_op(ah, rf_regs, wait_i,
+ AR5K_RF_WAIT_I, true);
+ ath5k_hw_rfb_op(ah, rf_regs, 3,
+ AR5K_RF_MAX_TIME, true);
+
+ }
+ }
+
+ if (ah->ah_radio == AR5K_RF5112) {
+
+ /* Set gain_F settings according to current step */
+ if (channel->hw_value != AR5K_MODE_11B) {
+
+ ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[0],
+ AR5K_RF_MIXGAIN_OVR, true);
+
+ ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[1],
+ AR5K_RF_PWD_138, true);
+
+ ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[2],
+ AR5K_RF_PWD_137, true);
+
+ ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[3],
+ AR5K_RF_PWD_136, true);
+
+ ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[4],
+ AR5K_RF_PWD_132, true);
+
+ ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[5],
+ AR5K_RF_PWD_131, true);
+
+ ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[6],
+ AR5K_RF_PWD_130, true);
+
+ /* We programmed gain_F parameters, switch back
+ * to active state */
+ ah->ah_gain.g_state = AR5K_RFGAIN_ACTIVE;
+ }
+
+ /* Bank 6/7 setup */
+
+ ath5k_hw_rfb_op(ah, rf_regs, ee->ee_xpd[ee_mode],
+ AR5K_RF_XPD_SEL, true);
+
+ if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_5112A) {
+ /* Rev. 1 supports only one xpd */
+ ath5k_hw_rfb_op(ah, rf_regs,
+ ee->ee_x_gain[ee_mode],
+ AR5K_RF_XPD_GAIN, true);
+
+ } else {
+ u8 *pdg_curve_to_idx = ee->ee_pdc_to_idx[ee_mode];
+ if (ee->ee_pd_gains[ee_mode] > 1) {
+ ath5k_hw_rfb_op(ah, rf_regs,
+ pdg_curve_to_idx[0],
+ AR5K_RF_PD_GAIN_LO, true);
+ ath5k_hw_rfb_op(ah, rf_regs,
+ pdg_curve_to_idx[1],
+ AR5K_RF_PD_GAIN_HI, true);
+ } else {
+ ath5k_hw_rfb_op(ah, rf_regs,
+ pdg_curve_to_idx[0],
+ AR5K_RF_PD_GAIN_LO, true);
+ ath5k_hw_rfb_op(ah, rf_regs,
+ pdg_curve_to_idx[0],
+ AR5K_RF_PD_GAIN_HI, true);
+ }
+
+ /* Lower synth voltage on Rev 2 */
+ if (ah->ah_radio == AR5K_RF5112 &&
+ (ah->ah_radio_5ghz_revision & AR5K_SREV_REV) > 0) {
+ ath5k_hw_rfb_op(ah, rf_regs, 2,
+ AR5K_RF_HIGH_VC_CP, true);
+
+ ath5k_hw_rfb_op(ah, rf_regs, 2,
+ AR5K_RF_MID_VC_CP, true);
+
+ ath5k_hw_rfb_op(ah, rf_regs, 2,
+ AR5K_RF_LOW_VC_CP, true);
+
+ ath5k_hw_rfb_op(ah, rf_regs, 2,
+ AR5K_RF_PUSH_UP, true);
+ }
+
+ /* Decrease power consumption on 5213+ BaseBand */
+ if (ah->ah_phy_revision >= AR5K_SREV_PHY_5212A) {
+ ath5k_hw_rfb_op(ah, rf_regs, 1,
+ AR5K_RF_PAD2GND, true);
+
+ ath5k_hw_rfb_op(ah, rf_regs, 1,
+ AR5K_RF_XB2_LVL, true);
+
+ ath5k_hw_rfb_op(ah, rf_regs, 1,
+ AR5K_RF_XB5_LVL, true);
+
+ ath5k_hw_rfb_op(ah, rf_regs, 1,
+ AR5K_RF_PWD_167, true);
+
+ ath5k_hw_rfb_op(ah, rf_regs, 1,
+ AR5K_RF_PWD_166, true);
+ }
+ }
+
+ ath5k_hw_rfb_op(ah, rf_regs, ee->ee_i_gain[ee_mode],
+ AR5K_RF_GAIN_I, true);
+
+ /* Tweak power detector for half/quarter rates */
+ if (ah->ah_bwmode == AR5K_BWMODE_5MHZ ||
+ ah->ah_bwmode == AR5K_BWMODE_10MHZ) {
+ u8 pd_delay;
+
+ pd_delay = (ah->ah_bwmode == AR5K_BWMODE_5MHZ) ?
+ 0xf : 0x8;
+
+ ath5k_hw_rfb_op(ah, rf_regs, pd_delay,
+ AR5K_RF_PD_PERIOD_A, true);
+ ath5k_hw_rfb_op(ah, rf_regs, 0xf,
+ AR5K_RF_PD_DELAY_A, true);
+
+ }
+ }
+
+ if (ah->ah_radio == AR5K_RF5413 &&
+ channel->band == NL80211_BAND_2GHZ) {
+
+ ath5k_hw_rfb_op(ah, rf_regs, 1, AR5K_RF_DERBY_CHAN_SEL_MODE,
+ true);
+
+ /* Set optimum value for early revisions (on pci-e chips) */
+ if (ah->ah_mac_srev >= AR5K_SREV_AR5424 &&
+ ah->ah_mac_srev < AR5K_SREV_AR5413)
+ ath5k_hw_rfb_op(ah, rf_regs, ath5k_hw_bitswap(6, 3),
+ AR5K_RF_PWD_ICLOBUF_2G, true);
+
+ }
+
+ /* Write RF banks on hw */
+ for (i = 0; i < ah->ah_rf_banks_size; i++) {
+ AR5K_REG_WAIT(i);
+ ath5k_hw_reg_write(ah, rfb[i], ini_rfb[i].rfb_ctrl_register);
+ }
+
+ return 0;
+}
+
+
+/**************************\
+ PHY/RF channel functions
+\**************************/
+
+/**
+ * ath5k_hw_rf5110_chan2athchan() - Convert channel freq on RF5110
+ * @channel: The &struct ieee80211_channel
+ *
+ * Map channel frequency to IEEE channel number and convert it
+ * to an internal channel value used by the RF5110 chipset.
+ */
+static u32
+ath5k_hw_rf5110_chan2athchan(struct ieee80211_channel *channel)
+{
+ u32 athchan;
+
+ athchan = (ath5k_hw_bitswap(
+ (ieee80211_frequency_to_channel(
+ channel->center_freq) - 24) / 2, 5)
+ << 1) | (1 << 6) | 0x1;
+ return athchan;
+}
+
+/**
+ * ath5k_hw_rf5110_channel() - Set channel frequency on RF5110
+ * @ah: The &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
+ */
+static int
+ath5k_hw_rf5110_channel(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel)
+{
+ u32 data;
+
+ /*
+ * Set the channel and wait
+ */
+ data = ath5k_hw_rf5110_chan2athchan(channel);
+ ath5k_hw_reg_write(ah, data, AR5K_RF_BUFFER);
+ ath5k_hw_reg_write(ah, 0, AR5K_RF_BUFFER_CONTROL_0);
+ usleep_range(1000, 1500);
+
+ return 0;
+}
+
+/**
+ * ath5k_hw_rf5111_chan2athchan() - Handle 2GHz channels on RF5111/2111
+ * @ieee: IEEE channel number
+ * @athchan: The &struct ath5k_athchan_2ghz
+ *
+ * In order to enable the RF2111 frequency converter on RF5111/2111 setups
+ * we need to add some offsets and extra flags to the data values we pass
+ * on to the PHY. So for every 2GHz channel this function gets called
+ * to do the conversion.
+ */
+static int
+ath5k_hw_rf5111_chan2athchan(unsigned int ieee,
+ struct ath5k_athchan_2ghz *athchan)
+{
+ int channel;
+
+ /* Cast this value to catch negative channel numbers (>= -19) */
+ channel = (int)ieee;
+
+ /*
+ * Map 2GHz IEEE channel to 5GHz Atheros channel
+ */
+ if (channel <= 13) {
+ athchan->a2_athchan = 115 + channel;
+ athchan->a2_flags = 0x46;
+ } else if (channel == 14) {
+ athchan->a2_athchan = 124;
+ athchan->a2_flags = 0x44;
+ } else if (channel >= 15 && channel <= 26) {
+ athchan->a2_athchan = ((channel - 14) * 4) + 132;
+ athchan->a2_flags = 0x46;
+ } else
+ return -EINVAL;
+
+ return 0;
+}
+
+/**
+ * ath5k_hw_rf5111_channel() - Set channel frequency on RF5111/2111
+ * @ah: The &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
+ */
+static int
+ath5k_hw_rf5111_channel(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel)
+{
+ struct ath5k_athchan_2ghz ath5k_channel_2ghz;
+ unsigned int ath5k_channel =
+ ieee80211_frequency_to_channel(channel->center_freq);
+ u32 data0, data1, clock;
+ int ret;
+
+ /*
+ * Set the channel on the RF5111 radio
+ */
+ data0 = data1 = 0;
+
+ if (channel->band == NL80211_BAND_2GHZ) {
+ /* Map 2GHz channel to 5GHz Atheros channel ID */
+ ret = ath5k_hw_rf5111_chan2athchan(
+ ieee80211_frequency_to_channel(channel->center_freq),
+ &ath5k_channel_2ghz);
+ if (ret)
+ return ret;
+
+ ath5k_channel = ath5k_channel_2ghz.a2_athchan;
+ data0 = ((ath5k_hw_bitswap(ath5k_channel_2ghz.a2_flags, 8) & 0xff)
+ << 5) | (1 << 4);
+ }
+
+ if (ath5k_channel < 145 || !(ath5k_channel & 1)) {
+ clock = 1;
+ data1 = ((ath5k_hw_bitswap(ath5k_channel - 24, 8) & 0xff) << 2) |
+ (clock << 1) | (1 << 10) | 1;
+ } else {
+ clock = 0;
+ data1 = ((ath5k_hw_bitswap((ath5k_channel - 24) / 2, 8) & 0xff)
+ << 2) | (clock << 1) | (1 << 10) | 1;
+ }
+
+ ath5k_hw_reg_write(ah, (data1 & 0xff) | ((data0 & 0xff) << 8),
+ AR5K_RF_BUFFER);
+ ath5k_hw_reg_write(ah, ((data1 >> 8) & 0xff) | (data0 & 0xff00),
+ AR5K_RF_BUFFER_CONTROL_3);
+
+ return 0;
+}
+
+/**
+ * ath5k_hw_rf5112_channel() - Set channel frequency on 5112 and newer
+ * @ah: The &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
+ *
+ * On RF5112/2112 and newer we don't need to do any conversion.
+ * We pass the frequency value after a few modifications to the
+ * chip directly.
+ *
+ * NOTE: Make sure channel frequency given is within our range or else
+ * we might damage the chip ! Use ath5k_channel_ok before calling this one.
+ */
+static int
+ath5k_hw_rf5112_channel(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel)
+{
+ u32 data, data0, data1, data2;
+ u16 c;
+
+ data = data0 = data1 = data2 = 0;
+ c = channel->center_freq;
+
+ /* My guess based on code:
+ * 2GHz RF has 2 synth modes, one with a Local Oscillator
+ * at 2224Hz and one with a LO at 2192Hz. IF is 1520Hz
+ * (3040/2). data0 is used to set the PLL divider and data1
+ * selects synth mode. */
+ if (c < 4800) {
+ /* Channel 14 and all frequencies with 2Hz spacing
+ * below/above (non-standard channels) */
+ if (!((c - 2224) % 5)) {
+ /* Same as (c - 2224) / 5 */
+ data0 = ((2 * (c - 704)) - 3040) / 10;
+ data1 = 1;
+ /* Channel 1 and all frequencies with 5Hz spacing
+ * below/above (standard channels without channel 14) */
+ } else if (!((c - 2192) % 5)) {
+ /* Same as (c - 2192) / 5 */
+ data0 = ((2 * (c - 672)) - 3040) / 10;
+ data1 = 0;
+ } else
+ return -EINVAL;
+
+ data0 = ath5k_hw_bitswap((data0 << 2) & 0xff, 8);
+ /* This is more complex, we have a single synthesizer with
+ * 4 reference clock settings (?) based on frequency spacing
+ * and set using data2. LO is at 4800Hz and data0 is again used
+ * to set some divider.
+ *
+ * NOTE: There is an old atheros presentation at Stanford
+ * that mentions a method called dual direct conversion
+ * with 1GHz sliding IF for RF5110. Maybe that's what we
+ * have here, or an updated version. */
+ } else if ((c % 5) != 2 || c > 5435) {
+ if (!(c % 20) && c >= 5120) {
+ data0 = ath5k_hw_bitswap(((c - 4800) / 20 << 2), 8);
+ data2 = ath5k_hw_bitswap(3, 2);
+ } else if (!(c % 10)) {
+ data0 = ath5k_hw_bitswap(((c - 4800) / 10 << 1), 8);
+ data2 = ath5k_hw_bitswap(2, 2);
+ } else if (!(c % 5)) {
+ data0 = ath5k_hw_bitswap((c - 4800) / 5, 8);
+ data2 = ath5k_hw_bitswap(1, 2);
+ } else
+ return -EINVAL;
+ } else {
+ data0 = ath5k_hw_bitswap((10 * (c - 2 - 4800)) / 25 + 1, 8);
+ data2 = ath5k_hw_bitswap(0, 2);
+ }
+
+ data = (data0 << 4) | (data1 << 1) | (data2 << 2) | 0x1001;
+
+ ath5k_hw_reg_write(ah, data & 0xff, AR5K_RF_BUFFER);
+ ath5k_hw_reg_write(ah, (data >> 8) & 0x7f, AR5K_RF_BUFFER_CONTROL_5);
+
+ return 0;
+}
+
+/**
+ * ath5k_hw_rf2425_channel() - Set channel frequency on RF2425
+ * @ah: The &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
+ *
+ * AR2425/2417 have a different 2GHz RF so code changes
+ * a little bit from RF5112.
+ */
+static int
+ath5k_hw_rf2425_channel(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel)
+{
+ u32 data, data0, data2;
+ u16 c;
+
+ data = data0 = data2 = 0;
+ c = channel->center_freq;
+
+ if (c < 4800) {
+ data0 = ath5k_hw_bitswap((c - 2272), 8);
+ data2 = 0;
+ /* ? 5GHz ? */
+ } else if ((c % 5) != 2 || c > 5435) {
+ if (!(c % 20) && c < 5120)
+ data0 = ath5k_hw_bitswap(((c - 4800) / 20 << 2), 8);
+ else if (!(c % 10))
+ data0 = ath5k_hw_bitswap(((c - 4800) / 10 << 1), 8);
+ else if (!(c % 5))
+ data0 = ath5k_hw_bitswap((c - 4800) / 5, 8);
+ else
+ return -EINVAL;
+ data2 = ath5k_hw_bitswap(1, 2);
+ } else {
+ data0 = ath5k_hw_bitswap((10 * (c - 2 - 4800)) / 25 + 1, 8);
+ data2 = ath5k_hw_bitswap(0, 2);
+ }
+
+ data = (data0 << 4) | data2 << 2 | 0x1001;
+
+ ath5k_hw_reg_write(ah, data & 0xff, AR5K_RF_BUFFER);
+ ath5k_hw_reg_write(ah, (data >> 8) & 0x7f, AR5K_RF_BUFFER_CONTROL_5);
+
+ return 0;
+}
+
+/**
+ * ath5k_hw_channel() - Set a channel on the radio chip
+ * @ah: The &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
+ *
+ * This is the main function called to set a channel on the
+ * radio chip based on the radio chip version.
+ */
+static int
+ath5k_hw_channel(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel)
+{
+ int ret;
+ /*
+ * Check bounds supported by the PHY (we don't care about regulatory
+ * restrictions at this point).
+ */
+ if (!ath5k_channel_ok(ah, channel)) {
+ ATH5K_ERR(ah,
+ "channel frequency (%u MHz) out of supported "
+ "band range\n",
+ channel->center_freq);
+ return -EINVAL;
+ }
+
+ /*
+ * Set the channel and wait
+ */
+ switch (ah->ah_radio) {
+ case AR5K_RF5110:
+ ret = ath5k_hw_rf5110_channel(ah, channel);
+ break;
+ case AR5K_RF5111:
+ ret = ath5k_hw_rf5111_channel(ah, channel);
+ break;
+ case AR5K_RF2317:
+ case AR5K_RF2425:
+ ret = ath5k_hw_rf2425_channel(ah, channel);
+ break;
+ default:
+ ret = ath5k_hw_rf5112_channel(ah, channel);
+ break;
+ }
+
+ if (ret)
+ return ret;
+
+ /* Set JAPAN setting for channel 14 */
+ if (channel->center_freq == 2484) {
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_CCKTXCTL,
+ AR5K_PHY_CCKTXCTL_JAPAN);
+ } else {
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_CCKTXCTL,
+ AR5K_PHY_CCKTXCTL_WORLD);
+ }
+
+ ah->ah_current_channel = channel;
+
+ return 0;
+}
+
+
+/*****************\
+ PHY calibration
+\*****************/
+
+/**
+ * DOC: PHY Calibration routines
+ *
+ * Noise floor calibration: When we tell the hardware to
+ * perform a noise floor calibration by setting the
+ * AR5K_PHY_AGCCTL_NF bit on AR5K_PHY_AGCCTL, it will periodically
+ * sample-and-hold the minimum noise level seen at the antennas.
+ * This value is then stored in a ring buffer of recently measured
+ * noise floor values so we have a moving window of the last few
+ * samples. The median of the values in the history is then loaded
+ * into the hardware for its own use for RSSI and CCA measurements.
+ * This type of calibration doesn't interfere with traffic.
+ *
+ * AGC calibration: When we tell the hardware to perform
+ * an AGC (Automatic Gain Control) calibration by setting the
+ * AR5K_PHY_AGCCTL_CAL, hw disconnects the antennas and does
+ * a calibration on the DC offsets of ADCs. During this period
+ * rx/tx gets disabled so we have to deal with it on the driver
+ * part.
+ *
+ * I/Q calibration: When we tell the hardware to perform
+ * an I/Q calibration, it tries to correct I/Q imbalance and
+ * fix QAM constellation by sampling data from rxed frames.
+ * It doesn't interfere with traffic.
+ *
+ * For more infos on AGC and I/Q calibration check out patent doc
+ * #03/094463.
+ */
+
+/**
+ * ath5k_hw_read_measured_noise_floor() - Read measured NF from hw
+ * @ah: The &struct ath5k_hw
+ */
+static s32
+ath5k_hw_read_measured_noise_floor(struct ath5k_hw *ah)
+{
+ s32 val;
+
+ val = ath5k_hw_reg_read(ah, AR5K_PHY_NF);
+ return sign_extend32(AR5K_REG_MS(val, AR5K_PHY_NF_MINCCA_PWR), 8);
+}
+
+/**
+ * ath5k_hw_init_nfcal_hist() - Initialize NF calibration history buffer
+ * @ah: The &struct ath5k_hw
+ */
+void
+ath5k_hw_init_nfcal_hist(struct ath5k_hw *ah)
+{
+ int i;
+
+ ah->ah_nfcal_hist.index = 0;
+ for (i = 0; i < ATH5K_NF_CAL_HIST_MAX; i++)
+ ah->ah_nfcal_hist.nfval[i] = AR5K_TUNE_CCA_MAX_GOOD_VALUE;
+}
+
+/**
+ * ath5k_hw_update_nfcal_hist() - Update NF calibration history buffer
+ * @ah: The &struct ath5k_hw
+ * @noise_floor: The NF we got from hw
+ */
+static void ath5k_hw_update_nfcal_hist(struct ath5k_hw *ah, s16 noise_floor)
+{
+ struct ath5k_nfcal_hist *hist = &ah->ah_nfcal_hist;
+ hist->index = (hist->index + 1) & (ATH5K_NF_CAL_HIST_MAX - 1);
+ hist->nfval[hist->index] = noise_floor;
+}
+
+/**
+ * ath5k_hw_get_median_noise_floor() - Get median NF from history buffer
+ * @ah: The &struct ath5k_hw
+ */
+static s16
+ath5k_hw_get_median_noise_floor(struct ath5k_hw *ah)
+{
+ s16 sort[ATH5K_NF_CAL_HIST_MAX];
+ s16 tmp;
+ int i, j;
+
+ memcpy(sort, ah->ah_nfcal_hist.nfval, sizeof(sort));
+ for (i = 0; i < ATH5K_NF_CAL_HIST_MAX - 1; i++) {
+ for (j = 1; j < ATH5K_NF_CAL_HIST_MAX - i; j++) {
+ if (sort[j] > sort[j - 1]) {
+ tmp = sort[j];
+ sort[j] = sort[j - 1];
+ sort[j - 1] = tmp;
+ }
+ }
+ }
+ for (i = 0; i < ATH5K_NF_CAL_HIST_MAX; i++) {
+ ATH5K_DBG(ah, ATH5K_DEBUG_CALIBRATE,
+ "cal %d:%d\n", i, sort[i]);
+ }
+ return sort[(ATH5K_NF_CAL_HIST_MAX - 1) / 2];
+}
+
+/**
+ * ath5k_hw_update_noise_floor() - Update NF on hardware
+ * @ah: The &struct ath5k_hw
+ *
+ * This is the main function we call to perform a NF calibration,
+ * it reads NF from hardware, calculates the median and updates
+ * NF on hw.
+ */
+void
+ath5k_hw_update_noise_floor(struct ath5k_hw *ah)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ u32 val;
+ s16 nf, threshold;
+ u8 ee_mode;
+
+ /* keep last value if calibration hasn't completed */
+ if (ath5k_hw_reg_read(ah, AR5K_PHY_AGCCTL) & AR5K_PHY_AGCCTL_NF) {
+ ATH5K_DBG(ah, ATH5K_DEBUG_CALIBRATE,
+ "NF did not complete in calibration window\n");
+
+ return;
+ }
+
+ ah->ah_cal_mask |= AR5K_CALIBRATION_NF;
+
+ ee_mode = ath5k_eeprom_mode_from_channel(ah, ah->ah_current_channel);
+
+ /* completed NF calibration, test threshold */
+ nf = ath5k_hw_read_measured_noise_floor(ah);
+ threshold = ee->ee_noise_floor_thr[ee_mode];
+
+ if (nf > threshold) {
+ ATH5K_DBG(ah, ATH5K_DEBUG_CALIBRATE,
+ "noise floor failure detected; "
+ "read %d, threshold %d\n",
+ nf, threshold);
+
+ nf = AR5K_TUNE_CCA_MAX_GOOD_VALUE;
+ }
+
+ ath5k_hw_update_nfcal_hist(ah, nf);
+ nf = ath5k_hw_get_median_noise_floor(ah);
+
+ /* load noise floor (in .5 dBm) so the hardware will use it */
+ val = ath5k_hw_reg_read(ah, AR5K_PHY_NF) & ~AR5K_PHY_NF_M;
+ val |= (nf * 2) & AR5K_PHY_NF_M;
+ ath5k_hw_reg_write(ah, val, AR5K_PHY_NF);
+
+ AR5K_REG_MASKED_BITS(ah, AR5K_PHY_AGCCTL, AR5K_PHY_AGCCTL_NF,
+ ~(AR5K_PHY_AGCCTL_NF_EN | AR5K_PHY_AGCCTL_NF_NOUPDATE));
+
+ ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL, AR5K_PHY_AGCCTL_NF,
+ 0, false);
+
+ /*
+ * Load a high max CCA Power value (-50 dBm in .5 dBm units)
+ * so that we're not capped by the median we just loaded.
+ * This will be used as the initial value for the next noise
+ * floor calibration.
+ */
+ val = (val & ~AR5K_PHY_NF_M) | ((-50 * 2) & AR5K_PHY_NF_M);
+ ath5k_hw_reg_write(ah, val, AR5K_PHY_NF);
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL,
+ AR5K_PHY_AGCCTL_NF_EN |
+ AR5K_PHY_AGCCTL_NF_NOUPDATE |
+ AR5K_PHY_AGCCTL_NF);
+
+ ah->ah_noise_floor = nf;
+
+ ah->ah_cal_mask &= ~AR5K_CALIBRATION_NF;
+
+ ATH5K_DBG(ah, ATH5K_DEBUG_CALIBRATE,
+ "noise floor calibrated: %d\n", nf);
+}
+
+/**
+ * ath5k_hw_rf5110_calibrate() - Perform a PHY calibration on RF5110
+ * @ah: The &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
+ *
+ * Do a complete PHY calibration (AGC + NF + I/Q) on RF5110
+ */
+static int
+ath5k_hw_rf5110_calibrate(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel)
+{
+ u32 phy_sig, phy_agc, phy_sat, beacon;
+ int ret;
+
+ if (!(ah->ah_cal_mask & AR5K_CALIBRATION_FULL))
+ return 0;
+
+ /*
+ * Disable beacons and RX/TX queues, wait
+ */
+ AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW_5210,
+ AR5K_DIAG_SW_DIS_TX_5210 | AR5K_DIAG_SW_DIS_RX_5210);
+ beacon = ath5k_hw_reg_read(ah, AR5K_BEACON_5210);
+ ath5k_hw_reg_write(ah, beacon & ~AR5K_BEACON_ENABLE, AR5K_BEACON_5210);
+
+ usleep_range(2000, 2500);
+
+ /*
+ * Set the channel (with AGC turned off)
+ */
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGC, AR5K_PHY_AGC_DISABLE);
+ udelay(10);
+ ret = ath5k_hw_channel(ah, channel);
+
+ /*
+ * Activate PHY and wait
+ */
+ ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT);
+ usleep_range(1000, 1500);
+
+ AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_AGC, AR5K_PHY_AGC_DISABLE);
+
+ if (ret)
+ return ret;
+
+ /*
+ * Calibrate the radio chip
+ */
+
+ /* Remember normal state */
+ phy_sig = ath5k_hw_reg_read(ah, AR5K_PHY_SIG);
+ phy_agc = ath5k_hw_reg_read(ah, AR5K_PHY_AGCCOARSE);
+ phy_sat = ath5k_hw_reg_read(ah, AR5K_PHY_ADCSAT);
+
+ /* Update radio registers */
+ ath5k_hw_reg_write(ah, (phy_sig & ~(AR5K_PHY_SIG_FIRPWR)) |
+ AR5K_REG_SM(-1, AR5K_PHY_SIG_FIRPWR), AR5K_PHY_SIG);
+
+ ath5k_hw_reg_write(ah, (phy_agc & ~(AR5K_PHY_AGCCOARSE_HI |
+ AR5K_PHY_AGCCOARSE_LO)) |
+ AR5K_REG_SM(-1, AR5K_PHY_AGCCOARSE_HI) |
+ AR5K_REG_SM(-127, AR5K_PHY_AGCCOARSE_LO), AR5K_PHY_AGCCOARSE);
+
+ ath5k_hw_reg_write(ah, (phy_sat & ~(AR5K_PHY_ADCSAT_ICNT |
+ AR5K_PHY_ADCSAT_THR)) |
+ AR5K_REG_SM(2, AR5K_PHY_ADCSAT_ICNT) |
+ AR5K_REG_SM(12, AR5K_PHY_ADCSAT_THR), AR5K_PHY_ADCSAT);
+
+ udelay(20);
+
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGC, AR5K_PHY_AGC_DISABLE);
+ udelay(10);
+ ath5k_hw_reg_write(ah, AR5K_PHY_RFSTG_DISABLE, AR5K_PHY_RFSTG);
+ AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_AGC, AR5K_PHY_AGC_DISABLE);
+
+ usleep_range(1000, 1500);
+
+ /*
+ * Enable calibration and wait until completion
+ */
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL, AR5K_PHY_AGCCTL_CAL);
+
+ ret = ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL,
+ AR5K_PHY_AGCCTL_CAL, 0, false);
+
+ /* Reset to normal state */
+ ath5k_hw_reg_write(ah, phy_sig, AR5K_PHY_SIG);
+ ath5k_hw_reg_write(ah, phy_agc, AR5K_PHY_AGCCOARSE);
+ ath5k_hw_reg_write(ah, phy_sat, AR5K_PHY_ADCSAT);
+
+ if (ret) {
+ ATH5K_ERR(ah, "calibration timeout (%uMHz)\n",
+ channel->center_freq);
+ return ret;
+ }
+
+ /*
+ * Re-enable RX/TX and beacons
+ */
+ AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW_5210,
+ AR5K_DIAG_SW_DIS_TX_5210 | AR5K_DIAG_SW_DIS_RX_5210);
+ ath5k_hw_reg_write(ah, beacon, AR5K_BEACON_5210);
+
+ return 0;
+}
+
+/**
+ * ath5k_hw_rf511x_iq_calibrate() - Perform I/Q calibration on RF5111 and newer
+ * @ah: The &struct ath5k_hw
+ */
+static int
+ath5k_hw_rf511x_iq_calibrate(struct ath5k_hw *ah)
+{
+ u32 i_pwr, q_pwr;
+ s32 iq_corr, i_coff, i_coffd, q_coff, q_coffd;
+ int i;
+
+ /* Skip if I/Q calibration is not needed or if it's still running */
+ if (!ah->ah_iq_cal_needed)
+ return -EINVAL;
+ else if (ath5k_hw_reg_read(ah, AR5K_PHY_IQ) & AR5K_PHY_IQ_RUN) {
+ ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_CALIBRATE,
+ "I/Q calibration still running");
+ return -EBUSY;
+ }
+
+ /* Calibration has finished, get the results and re-run */
+
+ /* Work around for empty results which can apparently happen on 5212:
+ * Read registers up to 10 times until we get both i_pr and q_pwr */
+ for (i = 0; i <= 10; i++) {
+ iq_corr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_CORR);
+ i_pwr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_PWR_I);
+ q_pwr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_PWR_Q);
+ ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_CALIBRATE,
+ "iq_corr:%x i_pwr:%x q_pwr:%x", iq_corr, i_pwr, q_pwr);
+ if (i_pwr && q_pwr)
+ break;
+ }
+
+ i_coffd = ((i_pwr >> 1) + (q_pwr >> 1)) >> 7;
+
+ if (ah->ah_version == AR5K_AR5211)
+ q_coffd = q_pwr >> 6;
+ else
+ q_coffd = q_pwr >> 7;
+
+ /* In case i_coffd became zero, cancel calibration
+ * not only it's too small, it'll also result a divide
+ * by zero later on. */
+ if (i_coffd == 0 || q_coffd < 2)
+ return -ECANCELED;
+
+ /* Protect against loss of sign bits */
+
+ i_coff = (-iq_corr) / i_coffd;
+ i_coff = clamp(i_coff, -32, 31); /* signed 6 bit */
+
+ if (ah->ah_version == AR5K_AR5211)
+ q_coff = (i_pwr / q_coffd) - 64;
+ else
+ q_coff = (i_pwr / q_coffd) - 128;
+ q_coff = clamp(q_coff, -16, 15); /* signed 5 bit */
+
+ ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_CALIBRATE,
+ "new I:%d Q:%d (i_coffd:%x q_coffd:%x)",
+ i_coff, q_coff, i_coffd, q_coffd);
+
+ /* Commit new I/Q values (set enable bit last to match HAL sources) */
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_Q_I_COFF, i_coff);
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_Q_Q_COFF, q_coff);
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_ENABLE);
+
+ /* Re-enable calibration -if we don't we'll commit
+ * the same values again and again */
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ,
+ AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15);
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_RUN);
+
+ return 0;
+}
+
+/**
+ * ath5k_hw_phy_calibrate() - Perform a PHY calibration
+ * @ah: The &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
+ *
+ * The main function we call from above to perform
+ * a short or full PHY calibration based on RF chip
+ * and current channel
+ */
+int
+ath5k_hw_phy_calibrate(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel)
+{
+ int ret;
+
+ if (ah->ah_radio == AR5K_RF5110)
+ return ath5k_hw_rf5110_calibrate(ah, channel);
+
+ ret = ath5k_hw_rf511x_iq_calibrate(ah);
+ if (ret) {
+ ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_CALIBRATE,
+ "No I/Q correction performed (%uMHz)\n",
+ channel->center_freq);
+
+ /* Happens all the time if there is not much
+ * traffic, consider it normal behaviour. */
+ ret = 0;
+ }
+
+ /* On full calibration request a PAPD probe for
+ * gainf calibration if needed */
+ if ((ah->ah_cal_mask & AR5K_CALIBRATION_FULL) &&
+ (ah->ah_radio == AR5K_RF5111 ||
+ ah->ah_radio == AR5K_RF5112) &&
+ channel->hw_value != AR5K_MODE_11B)
+ ath5k_hw_request_rfgain_probe(ah);
+
+ /* Update noise floor */
+ if (!(ah->ah_cal_mask & AR5K_CALIBRATION_NF))
+ ath5k_hw_update_noise_floor(ah);
+
+ return ret;
+}
+
+
+/***************************\
+* Spur mitigation functions *
+\***************************/
+
+/**
+ * ath5k_hw_set_spur_mitigation_filter() - Configure SPUR filter
+ * @ah: The &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
+ *
+ * This function gets called during PHY initialization to
+ * configure the spur filter for the given channel. Spur is noise
+ * generated due to "reflection" effects, for more information on this
+ * method check out patent US7643810
+ */
+static void
+ath5k_hw_set_spur_mitigation_filter(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ u32 mag_mask[4] = {0, 0, 0, 0};
+ u32 pilot_mask[2] = {0, 0};
+ /* Note: fbin values are scaled up by 2 */
+ u16 spur_chan_fbin, chan_fbin, symbol_width, spur_detection_window;
+ s32 spur_delta_phase, spur_freq_sigma_delta;
+ s32 spur_offset, num_symbols_x16;
+ u8 num_symbol_offsets, i, freq_band;
+
+ /* Convert current frequency to fbin value (the same way channels
+ * are stored on EEPROM, check out ath5k_eeprom_bin2freq) and scale
+ * up by 2 so we can compare it later */
+ if (channel->band == NL80211_BAND_2GHZ) {
+ chan_fbin = (channel->center_freq - 2300) * 10;
+ freq_band = AR5K_EEPROM_BAND_2GHZ;
+ } else {
+ chan_fbin = (channel->center_freq - 4900) * 10;
+ freq_band = AR5K_EEPROM_BAND_5GHZ;
+ }
+
+ /* Check if any spur_chan_fbin from EEPROM is
+ * within our current channel's spur detection range */
+ spur_chan_fbin = AR5K_EEPROM_NO_SPUR;
+ spur_detection_window = AR5K_SPUR_CHAN_WIDTH;
+ /* XXX: Half/Quarter channels ?*/
+ if (ah->ah_bwmode == AR5K_BWMODE_40MHZ)
+ spur_detection_window *= 2;
+
+ for (i = 0; i < AR5K_EEPROM_N_SPUR_CHANS; i++) {
+ spur_chan_fbin = ee->ee_spur_chans[i][freq_band];
+
+ /* Note: mask cleans AR5K_EEPROM_NO_SPUR flag
+ * so it's zero if we got nothing from EEPROM */
+ if (spur_chan_fbin == AR5K_EEPROM_NO_SPUR) {
+ spur_chan_fbin &= AR5K_EEPROM_SPUR_CHAN_MASK;
+ break;
+ }
+
+ if ((chan_fbin - spur_detection_window <=
+ (spur_chan_fbin & AR5K_EEPROM_SPUR_CHAN_MASK)) &&
+ (chan_fbin + spur_detection_window >=
+ (spur_chan_fbin & AR5K_EEPROM_SPUR_CHAN_MASK))) {
+ spur_chan_fbin &= AR5K_EEPROM_SPUR_CHAN_MASK;
+ break;
+ }
+ }
+
+ /* We need to enable spur filter for this channel */
+ if (spur_chan_fbin) {
+ spur_offset = spur_chan_fbin - chan_fbin;
+ /*
+ * Calculate deltas:
+ * spur_freq_sigma_delta -> spur_offset / sample_freq << 21
+ * spur_delta_phase -> spur_offset / chip_freq << 11
+ * Note: Both values have 100Hz resolution
+ */
+ switch (ah->ah_bwmode) {
+ case AR5K_BWMODE_40MHZ:
+ /* Both sample_freq and chip_freq are 80MHz */
+ spur_delta_phase = (spur_offset << 16) / 25;
+ spur_freq_sigma_delta = (spur_delta_phase >> 10);
+ symbol_width = AR5K_SPUR_SYMBOL_WIDTH_BASE_100Hz * 2;
+ break;
+ case AR5K_BWMODE_10MHZ:
+ /* Both sample_freq and chip_freq are 20MHz (?) */
+ spur_delta_phase = (spur_offset << 18) / 25;
+ spur_freq_sigma_delta = (spur_delta_phase >> 10);
+ symbol_width = AR5K_SPUR_SYMBOL_WIDTH_BASE_100Hz / 2;
+ break;
+ case AR5K_BWMODE_5MHZ:
+ /* Both sample_freq and chip_freq are 10MHz (?) */
+ spur_delta_phase = (spur_offset << 19) / 25;
+ spur_freq_sigma_delta = (spur_delta_phase >> 10);
+ symbol_width = AR5K_SPUR_SYMBOL_WIDTH_BASE_100Hz / 4;
+ break;
+ default:
+ if (channel->band == NL80211_BAND_5GHZ) {
+ /* Both sample_freq and chip_freq are 40MHz */
+ spur_delta_phase = (spur_offset << 17) / 25;
+ spur_freq_sigma_delta =
+ (spur_delta_phase >> 10);
+ symbol_width =
+ AR5K_SPUR_SYMBOL_WIDTH_BASE_100Hz;
+ } else {
+ /* sample_freq -> 40MHz chip_freq -> 44MHz
+ * (for b compatibility) */
+ spur_delta_phase = (spur_offset << 17) / 25;
+ spur_freq_sigma_delta =
+ (spur_offset << 8) / 55;
+ symbol_width =
+ AR5K_SPUR_SYMBOL_WIDTH_BASE_100Hz;
+ }
+ break;
+ }
+
+ /* Calculate pilot and magnitude masks */
+
+ /* Scale up spur_offset by 1000 to switch to 100HZ resolution
+ * and divide by symbol_width to find how many symbols we have
+ * Note: number of symbols is scaled up by 16 */
+ num_symbols_x16 = ((spur_offset * 1000) << 4) / symbol_width;
+
+ /* Spur is on a symbol if num_symbols_x16 % 16 is zero */
+ if (!(num_symbols_x16 & 0xF))
+ /* _X_ */
+ num_symbol_offsets = 3;
+ else
+ /* _xx_ */
+ num_symbol_offsets = 4;
+
+ for (i = 0; i < num_symbol_offsets; i++) {
+
+ /* Calculate pilot mask */
+ s32 curr_sym_off =
+ (num_symbols_x16 / 16) + i + 25;
+
+ /* Pilot magnitude mask seems to be a way to
+ * declare the boundaries for our detection
+ * window or something, it's 2 for the middle
+ * value(s) where the symbol is expected to be
+ * and 1 on the boundary values */
+ u8 plt_mag_map =
+ (i == 0 || i == (num_symbol_offsets - 1))
+ ? 1 : 2;
+
+ if (curr_sym_off >= 0 && curr_sym_off <= 32) {
+ if (curr_sym_off <= 25)
+ pilot_mask[0] |= 1 << curr_sym_off;
+ else if (curr_sym_off >= 27)
+ pilot_mask[0] |= 1 << (curr_sym_off - 1);
+ } else if (curr_sym_off >= 33 && curr_sym_off <= 52)
+ pilot_mask[1] |= 1 << (curr_sym_off - 33);
+
+ /* Calculate magnitude mask (for viterbi decoder) */
+ if (curr_sym_off >= -1 && curr_sym_off <= 14)
+ mag_mask[0] |=
+ plt_mag_map << (curr_sym_off + 1) * 2;
+ else if (curr_sym_off >= 15 && curr_sym_off <= 30)
+ mag_mask[1] |=
+ plt_mag_map << (curr_sym_off - 15) * 2;
+ else if (curr_sym_off >= 31 && curr_sym_off <= 46)
+ mag_mask[2] |=
+ plt_mag_map << (curr_sym_off - 31) * 2;
+ else if (curr_sym_off >= 47 && curr_sym_off <= 53)
+ mag_mask[3] |=
+ plt_mag_map << (curr_sym_off - 47) * 2;
+
+ }
+
+ /* Write settings on hw to enable spur filter */
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_BIN_MASK_CTL,
+ AR5K_PHY_BIN_MASK_CTL_RATE, 0xff);
+ /* XXX: Self correlator also ? */
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ,
+ AR5K_PHY_IQ_PILOT_MASK_EN |
+ AR5K_PHY_IQ_CHAN_MASK_EN |
+ AR5K_PHY_IQ_SPUR_FILT_EN);
+
+ /* Set delta phase and freq sigma delta */
+ ath5k_hw_reg_write(ah,
+ AR5K_REG_SM(spur_delta_phase,
+ AR5K_PHY_TIMING_11_SPUR_DELTA_PHASE) |
+ AR5K_REG_SM(spur_freq_sigma_delta,
+ AR5K_PHY_TIMING_11_SPUR_FREQ_SD) |
+ AR5K_PHY_TIMING_11_USE_SPUR_IN_AGC,
+ AR5K_PHY_TIMING_11);
+
+ /* Write pilot masks */
+ ath5k_hw_reg_write(ah, pilot_mask[0], AR5K_PHY_TIMING_7);
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_8,
+ AR5K_PHY_TIMING_8_PILOT_MASK_2,
+ pilot_mask[1]);
+
+ ath5k_hw_reg_write(ah, pilot_mask[0], AR5K_PHY_TIMING_9);
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_10,
+ AR5K_PHY_TIMING_10_PILOT_MASK_2,
+ pilot_mask[1]);
+
+ /* Write magnitude masks */
+ ath5k_hw_reg_write(ah, mag_mask[0], AR5K_PHY_BIN_MASK_1);
+ ath5k_hw_reg_write(ah, mag_mask[1], AR5K_PHY_BIN_MASK_2);
+ ath5k_hw_reg_write(ah, mag_mask[2], AR5K_PHY_BIN_MASK_3);
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_BIN_MASK_CTL,
+ AR5K_PHY_BIN_MASK_CTL_MASK_4,
+ mag_mask[3]);
+
+ ath5k_hw_reg_write(ah, mag_mask[0], AR5K_PHY_BIN_MASK2_1);
+ ath5k_hw_reg_write(ah, mag_mask[1], AR5K_PHY_BIN_MASK2_2);
+ ath5k_hw_reg_write(ah, mag_mask[2], AR5K_PHY_BIN_MASK2_3);
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_BIN_MASK2_4,
+ AR5K_PHY_BIN_MASK2_4_MASK_4,
+ mag_mask[3]);
+
+ } else if (ath5k_hw_reg_read(ah, AR5K_PHY_IQ) &
+ AR5K_PHY_IQ_SPUR_FILT_EN) {
+ /* Clean up spur mitigation settings and disable filter */
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_BIN_MASK_CTL,
+ AR5K_PHY_BIN_MASK_CTL_RATE, 0);
+ AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_IQ,
+ AR5K_PHY_IQ_PILOT_MASK_EN |
+ AR5K_PHY_IQ_CHAN_MASK_EN |
+ AR5K_PHY_IQ_SPUR_FILT_EN);
+ ath5k_hw_reg_write(ah, 0, AR5K_PHY_TIMING_11);
+
+ /* Clear pilot masks */
+ ath5k_hw_reg_write(ah, 0, AR5K_PHY_TIMING_7);
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_8,
+ AR5K_PHY_TIMING_8_PILOT_MASK_2,
+ 0);
+
+ ath5k_hw_reg_write(ah, 0, AR5K_PHY_TIMING_9);
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_10,
+ AR5K_PHY_TIMING_10_PILOT_MASK_2,
+ 0);
+
+ /* Clear magnitude masks */
+ ath5k_hw_reg_write(ah, 0, AR5K_PHY_BIN_MASK_1);
+ ath5k_hw_reg_write(ah, 0, AR5K_PHY_BIN_MASK_2);
+ ath5k_hw_reg_write(ah, 0, AR5K_PHY_BIN_MASK_3);
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_BIN_MASK_CTL,
+ AR5K_PHY_BIN_MASK_CTL_MASK_4,
+ 0);
+
+ ath5k_hw_reg_write(ah, 0, AR5K_PHY_BIN_MASK2_1);
+ ath5k_hw_reg_write(ah, 0, AR5K_PHY_BIN_MASK2_2);
+ ath5k_hw_reg_write(ah, 0, AR5K_PHY_BIN_MASK2_3);
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_BIN_MASK2_4,
+ AR5K_PHY_BIN_MASK2_4_MASK_4,
+ 0);
+ }
+}
+
+
+/*****************\
+* Antenna control *
+\*****************/
+
+/**
+ * DOC: Antenna control
+ *
+ * Hw supports up to 14 antennas ! I haven't found any card that implements
+ * that. The maximum number of antennas I've seen is up to 4 (2 for 2GHz and 2
+ * for 5GHz). Antenna 1 (MAIN) should be omnidirectional, 2 (AUX)
+ * omnidirectional or sectorial and antennas 3-14 sectorial (or directional).
+ *
+ * We can have a single antenna for RX and multiple antennas for TX.
+ * RX antenna is our "default" antenna (usually antenna 1) set on
+ * DEFAULT_ANTENNA register and TX antenna is set on each TX control descriptor
+ * (0 for automatic selection, 1 - 14 antenna number).
+ *
+ * We can let hw do all the work doing fast antenna diversity for both
+ * tx and rx or we can do things manually. Here are the options we have
+ * (all are bits of STA_ID1 register):
+ *
+ * AR5K_STA_ID1_DEFAULT_ANTENNA -> When 0 is set as the TX antenna on TX
+ * control descriptor, use the default antenna to transmit or else use the last
+ * antenna on which we received an ACK.
+ *
+ * AR5K_STA_ID1_DESC_ANTENNA -> Update default antenna after each TX frame to
+ * the antenna on which we got the ACK for that frame.
+ *
+ * AR5K_STA_ID1_RTS_DEF_ANTENNA -> Use default antenna for RTS or else use the
+ * one on the TX descriptor.
+ *
+ * AR5K_STA_ID1_SELFGEN_DEF_ANT -> Use default antenna for self generated frames
+ * (ACKs etc), or else use current antenna (the one we just used for TX).
+ *
+ * Using the above we support the following scenarios:
+ *
+ * AR5K_ANTMODE_DEFAULT -> Hw handles antenna diversity etc automatically
+ *
+ * AR5K_ANTMODE_FIXED_A -> Only antenna A (MAIN) is present
+ *
+ * AR5K_ANTMODE_FIXED_B -> Only antenna B (AUX) is present
+ *
+ * AR5K_ANTMODE_SINGLE_AP -> Sta locked on a single ap
+ *
+ * AR5K_ANTMODE_SECTOR_AP -> AP with tx antenna set on tx desc
+ *
+ * AR5K_ANTMODE_SECTOR_STA -> STA with tx antenna set on tx desc
+ *
+ * AR5K_ANTMODE_DEBUG Debug mode -A -> Rx, B-> Tx-
+ *
+ * Also note that when setting antenna to F on tx descriptor card inverts
+ * current tx antenna.
+ */
+
+/**
+ * ath5k_hw_set_def_antenna() - Set default rx antenna on AR5211/5212 and newer
+ * @ah: The &struct ath5k_hw
+ * @ant: Antenna number
+ */
+static void
+ath5k_hw_set_def_antenna(struct ath5k_hw *ah, u8 ant)
+{
+ if (ah->ah_version != AR5K_AR5210)
+ ath5k_hw_reg_write(ah, ant & 0x7, AR5K_DEFAULT_ANTENNA);
+}
+
+/**
+ * ath5k_hw_set_fast_div() - Enable/disable fast rx antenna diversity
+ * @ah: The &struct ath5k_hw
+ * @ee_mode: One of enum ath5k_driver_mode
+ * @enable: True to enable, false to disable
+ */
+static void
+ath5k_hw_set_fast_div(struct ath5k_hw *ah, u8 ee_mode, bool enable)
+{
+ switch (ee_mode) {
+ case AR5K_EEPROM_MODE_11G:
+ /* XXX: This is set to
+ * disabled on initvals !!! */
+ case AR5K_EEPROM_MODE_11A:
+ if (enable)
+ AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_AGCCTL,
+ AR5K_PHY_AGCCTL_OFDM_DIV_DIS);
+ else
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL,
+ AR5K_PHY_AGCCTL_OFDM_DIV_DIS);
+ break;
+ case AR5K_EEPROM_MODE_11B:
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL,
+ AR5K_PHY_AGCCTL_OFDM_DIV_DIS);
+ break;
+ default:
+ return;
+ }
+
+ if (enable) {
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_RESTART,
+ AR5K_PHY_RESTART_DIV_GC, 4);
+
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_FAST_ANT_DIV,
+ AR5K_PHY_FAST_ANT_DIV_EN);
+ } else {
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_RESTART,
+ AR5K_PHY_RESTART_DIV_GC, 0);
+
+ AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_FAST_ANT_DIV,
+ AR5K_PHY_FAST_ANT_DIV_EN);
+ }
+}
+
+/**
+ * ath5k_hw_set_antenna_switch() - Set up antenna switch table
+ * @ah: The &struct ath5k_hw
+ * @ee_mode: One of enum ath5k_driver_mode
+ *
+ * Switch table comes from EEPROM and includes information on controlling
+ * the 2 antenna RX attenuators
+ */
+void
+ath5k_hw_set_antenna_switch(struct ath5k_hw *ah, u8 ee_mode)
+{
+ u8 ant0, ant1;
+
+ /*
+ * In case a fixed antenna was set as default
+ * use the same switch table twice.
+ */
+ if (ah->ah_ant_mode == AR5K_ANTMODE_FIXED_A)
+ ant0 = ant1 = AR5K_ANT_SWTABLE_A;
+ else if (ah->ah_ant_mode == AR5K_ANTMODE_FIXED_B)
+ ant0 = ant1 = AR5K_ANT_SWTABLE_B;
+ else {
+ ant0 = AR5K_ANT_SWTABLE_A;
+ ant1 = AR5K_ANT_SWTABLE_B;
+ }
+
+ /* Set antenna idle switch table */
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_ANT_CTL,
+ AR5K_PHY_ANT_CTL_SWTABLE_IDLE,
+ (ah->ah_ant_ctl[ee_mode][AR5K_ANT_CTL] |
+ AR5K_PHY_ANT_CTL_TXRX_EN));
+
+ /* Set antenna switch tables */
+ ath5k_hw_reg_write(ah, ah->ah_ant_ctl[ee_mode][ant0],
+ AR5K_PHY_ANT_SWITCH_TABLE_0);
+ ath5k_hw_reg_write(ah, ah->ah_ant_ctl[ee_mode][ant1],
+ AR5K_PHY_ANT_SWITCH_TABLE_1);
+}
+
+/**
+ * ath5k_hw_set_antenna_mode() - Set antenna operating mode
+ * @ah: The &struct ath5k_hw
+ * @ant_mode: One of enum ath5k_ant_mode
+ */
+void
+ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode)
+{
+ struct ieee80211_channel *channel = ah->ah_current_channel;
+ bool use_def_for_tx, update_def_on_tx, use_def_for_rts, fast_div;
+ bool use_def_for_sg;
+ int ee_mode;
+ u8 def_ant, tx_ant;
+ u32 sta_id1 = 0;
+
+ /* if channel is not initialized yet we can't set the antennas
+ * so just store the mode. it will be set on the next reset */
+ if (channel == NULL) {
+ ah->ah_ant_mode = ant_mode;
+ return;
+ }
+
+ def_ant = ah->ah_def_ant;
+
+ ee_mode = ath5k_eeprom_mode_from_channel(ah, channel);
+
+ switch (ant_mode) {
+ case AR5K_ANTMODE_DEFAULT:
+ tx_ant = 0;
+ use_def_for_tx = false;
+ update_def_on_tx = false;
+ use_def_for_rts = false;
+ use_def_for_sg = false;
+ fast_div = true;
+ break;
+ case AR5K_ANTMODE_FIXED_A:
+ def_ant = 1;
+ tx_ant = 1;
+ use_def_for_tx = true;
+ update_def_on_tx = false;
+ use_def_for_rts = true;
+ use_def_for_sg = true;
+ fast_div = false;
+ break;
+ case AR5K_ANTMODE_FIXED_B:
+ def_ant = 2;
+ tx_ant = 2;
+ use_def_for_tx = true;
+ update_def_on_tx = false;
+ use_def_for_rts = true;
+ use_def_for_sg = true;
+ fast_div = false;
+ break;
+ case AR5K_ANTMODE_SINGLE_AP:
+ def_ant = 1; /* updated on tx */
+ tx_ant = 0;
+ use_def_for_tx = true;
+ update_def_on_tx = true;
+ use_def_for_rts = true;
+ use_def_for_sg = true;
+ fast_div = true;
+ break;
+ case AR5K_ANTMODE_SECTOR_AP:
+ tx_ant = 1; /* variable */
+ use_def_for_tx = false;
+ update_def_on_tx = false;
+ use_def_for_rts = true;
+ use_def_for_sg = false;
+ fast_div = false;
+ break;
+ case AR5K_ANTMODE_SECTOR_STA:
+ tx_ant = 1; /* variable */
+ use_def_for_tx = true;
+ update_def_on_tx = false;
+ use_def_for_rts = true;
+ use_def_for_sg = false;
+ fast_div = true;
+ break;
+ case AR5K_ANTMODE_DEBUG:
+ def_ant = 1;
+ tx_ant = 2;
+ use_def_for_tx = false;
+ update_def_on_tx = false;
+ use_def_for_rts = false;
+ use_def_for_sg = false;
+ fast_div = false;
+ break;
+ default:
+ return;
+ }
+
+ ah->ah_tx_ant = tx_ant;
+ ah->ah_ant_mode = ant_mode;
+ ah->ah_def_ant = def_ant;
+
+ sta_id1 |= use_def_for_tx ? AR5K_STA_ID1_DEFAULT_ANTENNA : 0;
+ sta_id1 |= update_def_on_tx ? AR5K_STA_ID1_DESC_ANTENNA : 0;
+ sta_id1 |= use_def_for_rts ? AR5K_STA_ID1_RTS_DEF_ANTENNA : 0;
+ sta_id1 |= use_def_for_sg ? AR5K_STA_ID1_SELFGEN_DEF_ANT : 0;
+
+ AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, AR5K_STA_ID1_ANTENNA_SETTINGS);
+
+ if (sta_id1)
+ AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, sta_id1);
+
+ ath5k_hw_set_antenna_switch(ah, ee_mode);
+ /* Note: set diversity before default antenna
+ * because it won't work correctly */
+ ath5k_hw_set_fast_div(ah, ee_mode, fast_div);
+ ath5k_hw_set_def_antenna(ah, def_ant);
+}
+
+
+/****************\
+* TX power setup *
+\****************/
+
+/*
+ * Helper functions
+ */
+
+/**
+ * ath5k_get_interpolated_value() - Get interpolated Y val between two points
+ * @target: X value of the middle point
+ * @x_left: X value of the left point
+ * @x_right: X value of the right point
+ * @y_left: Y value of the left point
+ * @y_right: Y value of the right point
+ */
+static s16
+ath5k_get_interpolated_value(s16 target, s16 x_left, s16 x_right,
+ s16 y_left, s16 y_right)
+{
+ s16 ratio, result;
+
+ /* Avoid divide by zero and skip interpolation
+ * if we have the same point */
+ if ((x_left == x_right) || (y_left == y_right))
+ return y_left;
+
+ /*
+ * Since we use ints and not fps, we need to scale up in
+ * order to get a sane ratio value (or else we 'll eg. get
+ * always 1 instead of 1.25, 1.75 etc). We scale up by 100
+ * to have some accuracy both for 0.5 and 0.25 steps.
+ */
+ ratio = ((100 * y_right - 100 * y_left) / (x_right - x_left));
+
+ /* Now scale down to be in range */
+ result = y_left + (ratio * (target - x_left) / 100);
+
+ return result;
+}
+
+/**
+ * ath5k_get_linear_pcdac_min() - Find vertical boundary (min pwr) for the
+ * linear PCDAC curve
+ * @stepL: Left array with y values (pcdac steps)
+ * @stepR: Right array with y values (pcdac steps)
+ * @pwrL: Left array with x values (power steps)
+ * @pwrR: Right array with x values (power steps)
+ *
+ * Since we have the top of the curve and we draw the line below
+ * until we reach 1 (1 pcdac step) we need to know which point
+ * (x value) that is so that we don't go below x axis and have negative
+ * pcdac values when creating the curve, or fill the table with zeros.
+ */
+static s16
+ath5k_get_linear_pcdac_min(const u8 *stepL, const u8 *stepR,
+ const s16 *pwrL, const s16 *pwrR)
+{
+ s8 tmp;
+ s16 min_pwrL, min_pwrR;
+ s16 pwr_i;
+
+ /* Some vendors write the same pcdac value twice !!! */
+ if (stepL[0] == stepL[1] || stepR[0] == stepR[1])
+ return max(pwrL[0], pwrR[0]);
+
+ if (pwrL[0] == pwrL[1])
+ min_pwrL = pwrL[0];
+ else {
+ pwr_i = pwrL[0];
+ do {
+ pwr_i--;
+ tmp = (s8) ath5k_get_interpolated_value(pwr_i,
+ pwrL[0], pwrL[1],
+ stepL[0], stepL[1]);
+ } while (tmp > 1);
+
+ min_pwrL = pwr_i;
+ }
+
+ if (pwrR[0] == pwrR[1])
+ min_pwrR = pwrR[0];
+ else {
+ pwr_i = pwrR[0];
+ do {
+ pwr_i--;
+ tmp = (s8) ath5k_get_interpolated_value(pwr_i,
+ pwrR[0], pwrR[1],
+ stepR[0], stepR[1]);
+ } while (tmp > 1);
+
+ min_pwrR = pwr_i;
+ }
+
+ /* Keep the right boundary so that it works for both curves */
+ return max(min_pwrL, min_pwrR);
+}
+
+/**
+ * ath5k_create_power_curve() - Create a Power to PDADC or PCDAC curve
+ * @pmin: Minimum power value (xmin)
+ * @pmax: Maximum power value (xmax)
+ * @pwr: Array of power steps (x values)
+ * @vpd: Array of matching PCDAC/PDADC steps (y values)
+ * @num_points: Number of provided points
+ * @vpd_table: Array to fill with the full PCDAC/PDADC values (y values)
+ * @type: One of enum ath5k_powertable_type (eeprom.h)
+ *
+ * Interpolate (pwr,vpd) points to create a Power to PDADC or a
+ * Power to PCDAC curve.
+ *
+ * Each curve has power on x axis (in 0.5dB units) and PCDAC/PDADC
+ * steps (offsets) on y axis. Power can go up to 31.5dB and max
+ * PCDAC/PDADC step for each curve is 64 but we can write more than
+ * one curves on hw so we can go up to 128 (which is the max step we
+ * can write on the final table).
+ *
+ * We write y values (PCDAC/PDADC steps) on hw.
+ */
+static void
+ath5k_create_power_curve(s16 pmin, s16 pmax,
+ const s16 *pwr, const u8 *vpd,
+ u8 num_points,
+ u8 *vpd_table, u8 type)
+{
+ u8 idx[2] = { 0, 1 };
+ s16 pwr_i = 2 * pmin;
+ int i;
+
+ if (num_points < 2)
+ return;
+
+ /* We want the whole line, so adjust boundaries
+ * to cover the entire power range. Note that
+ * power values are already 0.25dB so no need
+ * to multiply pwr_i by 2 */
+ if (type == AR5K_PWRTABLE_LINEAR_PCDAC) {
+ pwr_i = pmin;
+ pmin = 0;
+ pmax = 63;
+ }
+
+ /* Find surrounding turning points (TPs)
+ * and interpolate between them */
+ for (i = 0; (i <= (u16) (pmax - pmin)) &&
+ (i < AR5K_EEPROM_POWER_TABLE_SIZE); i++) {
+
+ /* We passed the right TP, move to the next set of TPs
+ * if we pass the last TP, extrapolate above using the last
+ * two TPs for ratio */
+ if ((pwr_i > pwr[idx[1]]) && (idx[1] < num_points - 1)) {
+ idx[0]++;
+ idx[1]++;
+ }
+
+ vpd_table[i] = (u8) ath5k_get_interpolated_value(pwr_i,
+ pwr[idx[0]], pwr[idx[1]],
+ vpd[idx[0]], vpd[idx[1]]);
+
+ /* Increase by 0.5dB
+ * (0.25 dB units) */
+ pwr_i += 2;
+ }
+}
+
+/**
+ * ath5k_get_chan_pcal_surrounding_piers() - Get surrounding calibration piers
+ * for a given channel.
+ * @ah: The &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
+ * @pcinfo_l: The &struct ath5k_chan_pcal_info to put the left cal. pier
+ * @pcinfo_r: The &struct ath5k_chan_pcal_info to put the right cal. pier
+ *
+ * Get the surrounding per-channel power calibration piers
+ * for a given frequency so that we can interpolate between
+ * them and come up with an appropriate dataset for our current
+ * channel.
+ */
+static void
+ath5k_get_chan_pcal_surrounding_piers(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel,
+ struct ath5k_chan_pcal_info **pcinfo_l,
+ struct ath5k_chan_pcal_info **pcinfo_r)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ struct ath5k_chan_pcal_info *pcinfo;
+ u8 idx_l, idx_r;
+ u8 mode, max, i;
+ u32 target = channel->center_freq;
+
+ idx_l = 0;
+ idx_r = 0;
+
+ switch (channel->hw_value) {
+ case AR5K_EEPROM_MODE_11A:
+ pcinfo = ee->ee_pwr_cal_a;
+ mode = AR5K_EEPROM_MODE_11A;
+ break;
+ case AR5K_EEPROM_MODE_11B:
+ pcinfo = ee->ee_pwr_cal_b;
+ mode = AR5K_EEPROM_MODE_11B;
+ break;
+ case AR5K_EEPROM_MODE_11G:
+ default:
+ pcinfo = ee->ee_pwr_cal_g;
+ mode = AR5K_EEPROM_MODE_11G;
+ break;
+ }
+ max = ee->ee_n_piers[mode] - 1;
+
+ /* Frequency is below our calibrated
+ * range. Use the lowest power curve
+ * we have */
+ if (target < pcinfo[0].freq) {
+ idx_l = idx_r = 0;
+ goto done;
+ }
+
+ /* Frequency is above our calibrated
+ * range. Use the highest power curve
+ * we have */
+ if (target > pcinfo[max].freq) {
+ idx_l = idx_r = max;
+ goto done;
+ }
+
+ /* Frequency is inside our calibrated
+ * channel range. Pick the surrounding
+ * calibration piers so that we can
+ * interpolate */
+ for (i = 0; i <= max; i++) {
+
+ /* Frequency matches one of our calibration
+ * piers, no need to interpolate, just use
+ * that calibration pier */
+ if (pcinfo[i].freq == target) {
+ idx_l = idx_r = i;
+ goto done;
+ }
+
+ /* We found a calibration pier that's above
+ * frequency, use this pier and the previous
+ * one to interpolate */
+ if (target < pcinfo[i].freq) {
+ idx_r = i;
+ idx_l = idx_r - 1;
+ goto done;
+ }
+ }
+
+done:
+ *pcinfo_l = &pcinfo[idx_l];
+ *pcinfo_r = &pcinfo[idx_r];
+}
+
+/**
+ * ath5k_get_rate_pcal_data() - Get the interpolated per-rate power
+ * calibration data
+ * @ah: The &struct ath5k_hw *ah,
+ * @channel: The &struct ieee80211_channel
+ * @rates: The &struct ath5k_rate_pcal_info to fill
+ *
+ * Get the surrounding per-rate power calibration data
+ * for a given frequency and interpolate between power
+ * values to set max target power supported by hw for
+ * each rate on this frequency.
+ */
+static void
+ath5k_get_rate_pcal_data(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel,
+ struct ath5k_rate_pcal_info *rates)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ struct ath5k_rate_pcal_info *rpinfo;
+ u8 idx_l, idx_r;
+ u8 mode, max, i;
+ u32 target = channel->center_freq;
+
+ idx_l = 0;
+ idx_r = 0;
+
+ switch (channel->hw_value) {
+ case AR5K_MODE_11A:
+ rpinfo = ee->ee_rate_tpwr_a;
+ mode = AR5K_EEPROM_MODE_11A;
+ break;
+ case AR5K_MODE_11B:
+ rpinfo = ee->ee_rate_tpwr_b;
+ mode = AR5K_EEPROM_MODE_11B;
+ break;
+ case AR5K_MODE_11G:
+ default:
+ rpinfo = ee->ee_rate_tpwr_g;
+ mode = AR5K_EEPROM_MODE_11G;
+ break;
+ }
+ max = ee->ee_rate_target_pwr_num[mode] - 1;
+
+ /* Get the surrounding calibration
+ * piers - same as above */
+ if (target < rpinfo[0].freq) {
+ idx_l = idx_r = 0;
+ goto done;
+ }
+
+ if (target > rpinfo[max].freq) {
+ idx_l = idx_r = max;
+ goto done;
+ }
+
+ for (i = 0; i <= max; i++) {
+
+ if (rpinfo[i].freq == target) {
+ idx_l = idx_r = i;
+ goto done;
+ }
+
+ if (target < rpinfo[i].freq) {
+ idx_r = i;
+ idx_l = idx_r - 1;
+ goto done;
+ }
+ }
+
+done:
+ /* Now interpolate power value, based on the frequency */
+ rates->freq = target;
+
+ rates->target_power_6to24 =
+ ath5k_get_interpolated_value(target, rpinfo[idx_l].freq,
+ rpinfo[idx_r].freq,
+ rpinfo[idx_l].target_power_6to24,
+ rpinfo[idx_r].target_power_6to24);
+
+ rates->target_power_36 =
+ ath5k_get_interpolated_value(target, rpinfo[idx_l].freq,
+ rpinfo[idx_r].freq,
+ rpinfo[idx_l].target_power_36,
+ rpinfo[idx_r].target_power_36);
+
+ rates->target_power_48 =
+ ath5k_get_interpolated_value(target, rpinfo[idx_l].freq,
+ rpinfo[idx_r].freq,
+ rpinfo[idx_l].target_power_48,
+ rpinfo[idx_r].target_power_48);
+
+ rates->target_power_54 =
+ ath5k_get_interpolated_value(target, rpinfo[idx_l].freq,
+ rpinfo[idx_r].freq,
+ rpinfo[idx_l].target_power_54,
+ rpinfo[idx_r].target_power_54);
+}
+
+/**
+ * ath5k_get_max_ctl_power() - Get max edge power for a given frequency
+ * @ah: the &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
+ *
+ * Get the max edge power for this channel if
+ * we have such data from EEPROM's Conformance Test
+ * Limits (CTL), and limit max power if needed.
+ */
+static void
+ath5k_get_max_ctl_power(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel)
+{
+ struct ath_regulatory *regulatory = ath5k_hw_regulatory(ah);
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ struct ath5k_edge_power *rep = ee->ee_ctl_pwr;
+ u8 *ctl_val = ee->ee_ctl;
+ s16 max_chan_pwr = ah->ah_txpower.txp_max_pwr / 4;
+ s16 edge_pwr = 0;
+ u8 rep_idx;
+ u8 i, ctl_mode;
+ u8 ctl_idx = 0xFF;
+ u32 target = channel->center_freq;
+
+ ctl_mode = ath_regd_get_band_ctl(regulatory, channel->band);
+
+ switch (channel->hw_value) {
+ case AR5K_MODE_11A:
+ if (ah->ah_bwmode == AR5K_BWMODE_40MHZ)
+ ctl_mode |= AR5K_CTL_TURBO;
+ else
+ ctl_mode |= AR5K_CTL_11A;
+ break;
+ case AR5K_MODE_11G:
+ if (ah->ah_bwmode == AR5K_BWMODE_40MHZ)
+ ctl_mode |= AR5K_CTL_TURBOG;
+ else
+ ctl_mode |= AR5K_CTL_11G;
+ break;
+ case AR5K_MODE_11B:
+ ctl_mode |= AR5K_CTL_11B;
+ break;
+ default:
+ return;
+ }
+
+ for (i = 0; i < ee->ee_ctls; i++) {
+ if (ctl_val[i] == ctl_mode) {
+ ctl_idx = i;
+ break;
+ }
+ }
+
+ /* If we have a CTL dataset available grab it and find the
+ * edge power for our frequency */
+ if (ctl_idx == 0xFF)
+ return;
+
+ /* Edge powers are sorted by frequency from lower
+ * to higher. Each CTL corresponds to 8 edge power
+ * measurements. */
+ rep_idx = ctl_idx * AR5K_EEPROM_N_EDGES;
+
+ /* Don't do boundaries check because we
+ * might have more that one bands defined
+ * for this mode */
+
+ /* Get the edge power that's closer to our
+ * frequency */
+ for (i = 0; i < AR5K_EEPROM_N_EDGES; i++) {
+ rep_idx += i;
+ if (target <= rep[rep_idx].freq)
+ edge_pwr = (s16) rep[rep_idx].edge;
+ }
+
+ if (edge_pwr)
+ ah->ah_txpower.txp_max_pwr = 4 * min(edge_pwr, max_chan_pwr);
+}
+
+
+/*
+ * Power to PCDAC table functions
+ */
+
+/**
+ * DOC: Power to PCDAC table functions
+ *
+ * For RF5111 we have an XPD -eXternal Power Detector- curve
+ * for each calibrated channel. Each curve has 0,5dB Power steps
+ * on x axis and PCDAC steps (offsets) on y axis and looks like an
+ * exponential function. To recreate the curve we read 11 points
+ * from eeprom (eeprom.c) and interpolate here.
+ *
+ * For RF5112 we have 4 XPD -eXternal Power Detector- curves
+ * for each calibrated channel on 0, -6, -12 and -18dBm but we only
+ * use the higher (3) and the lower (0) curves. Each curve again has 0.5dB
+ * power steps on x axis and PCDAC steps on y axis and looks like a
+ * linear function. To recreate the curve and pass the power values
+ * on hw, we get 4 points for xpd 0 (lower gain -> max power)
+ * and 3 points for xpd 3 (higher gain -> lower power) from eeprom (eeprom.c)
+ * and interpolate here.
+ *
+ * For a given channel we get the calibrated points (piers) for it or
+ * -if we don't have calibration data for this specific channel- from the
+ * available surrounding channels we have calibration data for, after we do a
+ * linear interpolation between them. Then since we have our calibrated points
+ * for this channel, we do again a linear interpolation between them to get the
+ * whole curve.
+ *
+ * We finally write the Y values of the curve(s) (the PCDAC values) on hw
+ */
+
+/**
+ * ath5k_fill_pwr_to_pcdac_table() - Fill Power to PCDAC table on RF5111
+ * @ah: The &struct ath5k_hw
+ * @table_min: Minimum power (x min)
+ * @table_max: Maximum power (x max)
+ *
+ * No further processing is needed for RF5111, the only thing we have to
+ * do is fill the values below and above calibration range since eeprom data
+ * may not cover the entire PCDAC table.
+ */
+static void
+ath5k_fill_pwr_to_pcdac_table(struct ath5k_hw *ah, s16* table_min,
+ s16 *table_max)
+{
+ u8 *pcdac_out = ah->ah_txpower.txp_pd_table;
+ u8 *pcdac_tmp = ah->ah_txpower.tmpL[0];
+ u8 pcdac_0, pcdac_n, pcdac_i, pwr_idx, i;
+ s16 min_pwr, max_pwr;
+
+ /* Get table boundaries */
+ min_pwr = table_min[0];
+ pcdac_0 = pcdac_tmp[0];
+
+ max_pwr = table_max[0];
+ pcdac_n = pcdac_tmp[table_max[0] - table_min[0]];
+
+ /* Extrapolate below minimum using pcdac_0 */
+ pcdac_i = 0;
+ for (i = 0; i < min_pwr; i++)
+ pcdac_out[pcdac_i++] = pcdac_0;
+
+ /* Copy values from pcdac_tmp */
+ pwr_idx = min_pwr;
+ for (i = 0; pwr_idx <= max_pwr &&
+ pcdac_i < AR5K_EEPROM_POWER_TABLE_SIZE; i++) {
+ pcdac_out[pcdac_i++] = pcdac_tmp[i];
+ pwr_idx++;
+ }
+
+ /* Extrapolate above maximum */
+ while (pcdac_i < AR5K_EEPROM_POWER_TABLE_SIZE)
+ pcdac_out[pcdac_i++] = pcdac_n;
+
+}
+
+/**
+ * ath5k_combine_linear_pcdac_curves() - Combine available PCDAC Curves
+ * @ah: The &struct ath5k_hw
+ * @table_min: Minimum power (x min)
+ * @table_max: Maximum power (x max)
+ * @pdcurves: Number of pd curves
+ *
+ * Combine available XPD Curves and fill Linear Power to PCDAC table on RF5112
+ * RFX112 can have up to 2 curves (one for low txpower range and one for
+ * higher txpower range). We need to put them both on pcdac_out and place
+ * them in the correct location. In case we only have one curve available
+ * just fit it on pcdac_out (it's supposed to cover the entire range of
+ * available pwr levels since it's always the higher power curve). Extrapolate
+ * below and above final table if needed.
+ */
+static void
+ath5k_combine_linear_pcdac_curves(struct ath5k_hw *ah, s16* table_min,
+ s16 *table_max, u8 pdcurves)
+{
+ u8 *pcdac_out = ah->ah_txpower.txp_pd_table;
+ u8 *pcdac_low_pwr;
+ u8 *pcdac_high_pwr;
+ u8 *pcdac_tmp;
+ u8 pwr;
+ s16 max_pwr_idx;
+ s16 min_pwr_idx;
+ s16 mid_pwr_idx = 0;
+ /* Edge flag turns on the 7nth bit on the PCDAC
+ * to declare the higher power curve (force values
+ * to be greater than 64). If we only have one curve
+ * we don't need to set this, if we have 2 curves and
+ * fill the table backwards this can also be used to
+ * switch from higher power curve to lower power curve */
+ u8 edge_flag;
+ int i;
+
+ /* When we have only one curve available
+ * that's the higher power curve. If we have
+ * two curves the first is the high power curve
+ * and the next is the low power curve. */
+ if (pdcurves > 1) {
+ pcdac_low_pwr = ah->ah_txpower.tmpL[1];
+ pcdac_high_pwr = ah->ah_txpower.tmpL[0];
+ mid_pwr_idx = table_max[1] - table_min[1] - 1;
+ max_pwr_idx = (table_max[0] - table_min[0]) / 2;
+
+ /* If table size goes beyond 31.5dB, keep the
+ * upper 31.5dB range when setting tx power.
+ * Note: 126 = 31.5 dB in quarter dB steps */
+ if (table_max[0] - table_min[1] > 126)
+ min_pwr_idx = table_max[0] - 126;
+ else
+ min_pwr_idx = table_min[1];
+
+ /* Since we fill table backwards
+ * start from high power curve */
+ pcdac_tmp = pcdac_high_pwr;
+
+ edge_flag = 0x40;
+ } else {
+ pcdac_low_pwr = ah->ah_txpower.tmpL[1]; /* Zeroed */
+ pcdac_high_pwr = ah->ah_txpower.tmpL[0];
+ min_pwr_idx = table_min[0];
+ max_pwr_idx = (table_max[0] - table_min[0]) / 2;
+ pcdac_tmp = pcdac_high_pwr;
+ edge_flag = 0;
+ }
+
+ /* This is used when setting tx power*/
+ ah->ah_txpower.txp_min_idx = min_pwr_idx / 2;
+
+ /* Fill Power to PCDAC table backwards */
+ pwr = max_pwr_idx;
+ for (i = 63; i >= 0; i--) {
+ /* Entering lower power range, reset
+ * edge flag and set pcdac_tmp to lower
+ * power curve.*/
+ if (edge_flag == 0x40 &&
+ (2 * pwr <= (table_max[1] - table_min[0]) || pwr == 0)) {
+ edge_flag = 0x00;
+ pcdac_tmp = pcdac_low_pwr;
+ pwr = mid_pwr_idx / 2;
+ }
+
+ /* Don't go below 1, extrapolate below if we have
+ * already switched to the lower power curve -or
+ * we only have one curve and edge_flag is zero
+ * anyway */
+ if (pcdac_tmp[pwr] < 1 && (edge_flag == 0x00)) {
+ while (i >= 0) {
+ pcdac_out[i] = pcdac_out[i + 1];
+ i--;
+ }
+ break;
+ }
+
+ pcdac_out[i] = pcdac_tmp[pwr] | edge_flag;
+
+ /* Extrapolate above if pcdac is greater than
+ * 126 -this can happen because we OR pcdac_out
+ * value with edge_flag on high power curve */
+ if (pcdac_out[i] > 126)
+ pcdac_out[i] = 126;
+
+ /* Decrease by a 0.5dB step */
+ pwr--;
+ }
+}
+
+/**
+ * ath5k_write_pcdac_table() - Write the PCDAC values on hw
+ * @ah: The &struct ath5k_hw
+ */
+static void
+ath5k_write_pcdac_table(struct ath5k_hw *ah)
+{
+ u8 *pcdac_out = ah->ah_txpower.txp_pd_table;
+ int i;
+
+ /*
+ * Write TX power values
+ */
+ for (i = 0; i < (AR5K_EEPROM_POWER_TABLE_SIZE / 2); i++) {
+ ath5k_hw_reg_write(ah,
+ (((pcdac_out[2 * i + 0] << 8 | 0xff) & 0xffff) << 0) |
+ (((pcdac_out[2 * i + 1] << 8 | 0xff) & 0xffff) << 16),
+ AR5K_PHY_PCDAC_TXPOWER(i));
+ }
+}
+
+
+/*
+ * Power to PDADC table functions
+ */
+
+/**
+ * DOC: Power to PDADC table functions
+ *
+ * For RF2413 and later we have a Power to PDADC table (Power Detector)
+ * instead of a PCDAC (Power Control) and 4 pd gain curves for each
+ * calibrated channel. Each curve has power on x axis in 0.5 db steps and
+ * PDADC steps on y axis and looks like an exponential function like the
+ * RF5111 curve.
+ *
+ * To recreate the curves we read the points from eeprom (eeprom.c)
+ * and interpolate here. Note that in most cases only 2 (higher and lower)
+ * curves are used (like RF5112) but vendors have the opportunity to include
+ * all 4 curves on eeprom. The final curve (higher power) has an extra
+ * point for better accuracy like RF5112.
+ *
+ * The process is similar to what we do above for RF5111/5112
+ */
+
+/**
+ * ath5k_combine_pwr_to_pdadc_curves() - Combine the various PDADC curves
+ * @ah: The &struct ath5k_hw
+ * @pwr_min: Minimum power (x min)
+ * @pwr_max: Maximum power (x max)
+ * @pdcurves: Number of available curves
+ *
+ * Combine the various pd curves and create the final Power to PDADC table
+ * We can have up to 4 pd curves, we need to do a similar process
+ * as we do for RF5112. This time we don't have an edge_flag but we
+ * set the gain boundaries on a separate register.
+ */
+static void
+ath5k_combine_pwr_to_pdadc_curves(struct ath5k_hw *ah,
+ s16 *pwr_min, s16 *pwr_max, u8 pdcurves)
+{
+ u8 gain_boundaries[AR5K_EEPROM_N_PD_GAINS];
+ u8 *pdadc_out = ah->ah_txpower.txp_pd_table;
+ u8 *pdadc_tmp;
+ s16 pdadc_0;
+ u8 pdadc_i, pdadc_n, pwr_step, pdg, max_idx, table_size;
+ u8 pd_gain_overlap;
+
+ /* Note: Register value is initialized on initvals
+ * there is no feedback from hw.
+ * XXX: What about pd_gain_overlap from EEPROM ? */
+ pd_gain_overlap = (u8) ath5k_hw_reg_read(ah, AR5K_PHY_TPC_RG5) &
+ AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP;
+
+ /* Create final PDADC table */
+ for (pdg = 0, pdadc_i = 0; pdg < pdcurves; pdg++) {
+ pdadc_tmp = ah->ah_txpower.tmpL[pdg];
+
+ if (pdg == pdcurves - 1)
+ /* 2 dB boundary stretch for last
+ * (higher power) curve */
+ gain_boundaries[pdg] = pwr_max[pdg] + 4;
+ else
+ /* Set gain boundary in the middle
+ * between this curve and the next one */
+ gain_boundaries[pdg] =
+ (pwr_max[pdg] + pwr_min[pdg + 1]) / 2;
+
+ /* Sanity check in case our 2 db stretch got out of
+ * range. */
+ if (gain_boundaries[pdg] > AR5K_TUNE_MAX_TXPOWER)
+ gain_boundaries[pdg] = AR5K_TUNE_MAX_TXPOWER;
+
+ /* For the first curve (lower power)
+ * start from 0 dB */
+ if (pdg == 0)
+ pdadc_0 = 0;
+ else
+ /* For the other curves use the gain overlap */
+ pdadc_0 = (gain_boundaries[pdg - 1] - pwr_min[pdg]) -
+ pd_gain_overlap;
+
+ /* Force each power step to be at least 0.5 dB */
+ if ((pdadc_tmp[1] - pdadc_tmp[0]) > 1)
+ pwr_step = pdadc_tmp[1] - pdadc_tmp[0];
+ else
+ pwr_step = 1;
+
+ /* If pdadc_0 is negative, we need to extrapolate
+ * below this pdgain by a number of pwr_steps */
+ while ((pdadc_0 < 0) && (pdadc_i < 128)) {
+ s16 tmp = pdadc_tmp[0] + pdadc_0 * pwr_step;
+ pdadc_out[pdadc_i++] = (tmp < 0) ? 0 : (u8) tmp;
+ pdadc_0++;
+ }
+
+ /* Set last pwr level, using gain boundaries */
+ pdadc_n = gain_boundaries[pdg] + pd_gain_overlap - pwr_min[pdg];
+ /* Limit it to be inside pwr range */
+ table_size = pwr_max[pdg] - pwr_min[pdg];
+ max_idx = min(pdadc_n, table_size);
+
+ /* Fill pdadc_out table */
+ while (pdadc_0 < max_idx && pdadc_i < 128)
+ pdadc_out[pdadc_i++] = pdadc_tmp[pdadc_0++];
+
+ /* Need to extrapolate above this pdgain? */
+ if (pdadc_n <= max_idx)
+ continue;
+
+ /* Force each power step to be at least 0.5 dB */
+ if ((pdadc_tmp[table_size - 1] - pdadc_tmp[table_size - 2]) > 1)
+ pwr_step = pdadc_tmp[table_size - 1] -
+ pdadc_tmp[table_size - 2];
+ else
+ pwr_step = 1;
+
+ /* Extrapolate above */
+ while ((pdadc_0 < (s16) pdadc_n) &&
+ (pdadc_i < AR5K_EEPROM_POWER_TABLE_SIZE * 2)) {
+ s16 tmp = pdadc_tmp[table_size - 1] +
+ (pdadc_0 - max_idx) * pwr_step;
+ pdadc_out[pdadc_i++] = (tmp > 127) ? 127 : (u8) tmp;
+ pdadc_0++;
+ }
+ }
+
+ while (pdg < AR5K_EEPROM_N_PD_GAINS) {
+ gain_boundaries[pdg] = gain_boundaries[pdg - 1];
+ pdg++;
+ }
+
+ while (pdadc_i < AR5K_EEPROM_POWER_TABLE_SIZE * 2) {
+ pdadc_out[pdadc_i] = pdadc_out[pdadc_i - 1];
+ pdadc_i++;
+ }
+
+ /* Set gain boundaries */
+ ath5k_hw_reg_write(ah,
+ AR5K_REG_SM(pd_gain_overlap,
+ AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP) |
+ AR5K_REG_SM(gain_boundaries[0],
+ AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_1) |
+ AR5K_REG_SM(gain_boundaries[1],
+ AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_2) |
+ AR5K_REG_SM(gain_boundaries[2],
+ AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_3) |
+ AR5K_REG_SM(gain_boundaries[3],
+ AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_4),
+ AR5K_PHY_TPC_RG5);
+
+ /* Used for setting rate power table */
+ ah->ah_txpower.txp_min_idx = pwr_min[0];
+
+}
+
+/**
+ * ath5k_write_pwr_to_pdadc_table() - Write the PDADC values on hw
+ * @ah: The &struct ath5k_hw
+ * @ee_mode: One of enum ath5k_driver_mode
+ */
+static void
+ath5k_write_pwr_to_pdadc_table(struct ath5k_hw *ah, u8 ee_mode)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ u8 *pdadc_out = ah->ah_txpower.txp_pd_table;
+ u8 *pdg_to_idx = ee->ee_pdc_to_idx[ee_mode];
+ u8 pdcurves = ee->ee_pd_gains[ee_mode];
+ u32 reg;
+ u8 i;
+
+ /* Select the right pdgain curves */
+
+ /* Clear current settings */
+ reg = ath5k_hw_reg_read(ah, AR5K_PHY_TPC_RG1);
+ reg &= ~(AR5K_PHY_TPC_RG1_PDGAIN_1 |
+ AR5K_PHY_TPC_RG1_PDGAIN_2 |
+ AR5K_PHY_TPC_RG1_PDGAIN_3 |
+ AR5K_PHY_TPC_RG1_NUM_PD_GAIN);
+
+ /*
+ * Use pd_gains curve from eeprom
+ *
+ * This overrides the default setting from initvals
+ * in case some vendors (e.g. Zcomax) don't use the default
+ * curves. If we don't honor their settings we 'll get a
+ * 5dB (1 * gain overlap ?) drop.
+ */
+ reg |= AR5K_REG_SM(pdcurves, AR5K_PHY_TPC_RG1_NUM_PD_GAIN);
+
+ switch (pdcurves) {
+ case 3:
+ reg |= AR5K_REG_SM(pdg_to_idx[2], AR5K_PHY_TPC_RG1_PDGAIN_3);
+ fallthrough;
+ case 2:
+ reg |= AR5K_REG_SM(pdg_to_idx[1], AR5K_PHY_TPC_RG1_PDGAIN_2);
+ fallthrough;
+ case 1:
+ reg |= AR5K_REG_SM(pdg_to_idx[0], AR5K_PHY_TPC_RG1_PDGAIN_1);
+ break;
+ }
+ ath5k_hw_reg_write(ah, reg, AR5K_PHY_TPC_RG1);
+
+ /*
+ * Write TX power values
+ */
+ for (i = 0; i < (AR5K_EEPROM_POWER_TABLE_SIZE / 2); i++) {
+ u32 val = get_unaligned_le32(&pdadc_out[4 * i]);
+ ath5k_hw_reg_write(ah, val, AR5K_PHY_PDADC_TXPOWER(i));
+ }
+}
+
+
+/*
+ * Common code for PCDAC/PDADC tables
+ */
+
+/**
+ * ath5k_setup_channel_powertable() - Set up power table for this channel
+ * @ah: The &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
+ * @ee_mode: One of enum ath5k_driver_mode
+ * @type: One of enum ath5k_powertable_type (eeprom.h)
+ *
+ * This is the main function that uses all of the above
+ * to set PCDAC/PDADC table on hw for the current channel.
+ * This table is used for tx power calibration on the baseband,
+ * without it we get weird tx power levels and in some cases
+ * distorted spectral mask
+ */
+static int
+ath5k_setup_channel_powertable(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel,
+ u8 ee_mode, u8 type)
+{
+ struct ath5k_pdgain_info *pdg_L, *pdg_R;
+ struct ath5k_chan_pcal_info *pcinfo_L;
+ struct ath5k_chan_pcal_info *pcinfo_R;
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ u8 *pdg_curve_to_idx = ee->ee_pdc_to_idx[ee_mode];
+ s16 table_min[AR5K_EEPROM_N_PD_GAINS];
+ s16 table_max[AR5K_EEPROM_N_PD_GAINS];
+ u8 *tmpL;
+ u8 *tmpR;
+ u32 target = channel->center_freq;
+ int pdg, i;
+
+ /* Get surrounding freq piers for this channel */
+ ath5k_get_chan_pcal_surrounding_piers(ah, channel,
+ &pcinfo_L,
+ &pcinfo_R);
+
+ /* Loop over pd gain curves on
+ * surrounding freq piers by index */
+ for (pdg = 0; pdg < ee->ee_pd_gains[ee_mode]; pdg++) {
+
+ /* Fill curves in reverse order
+ * from lower power (max gain)
+ * to higher power. Use curve -> idx
+ * backmapping we did on eeprom init */
+ u8 idx = pdg_curve_to_idx[pdg];
+
+ /* Grab the needed curves by index */
+ pdg_L = &pcinfo_L->pd_curves[idx];
+ pdg_R = &pcinfo_R->pd_curves[idx];
+
+ /* Initialize the temp tables */
+ tmpL = ah->ah_txpower.tmpL[pdg];
+ tmpR = ah->ah_txpower.tmpR[pdg];
+
+ /* Set curve's x boundaries and create
+ * curves so that they cover the same
+ * range (if we don't do that one table
+ * will have values on some range and the
+ * other one won't have any so interpolation
+ * will fail) */
+ table_min[pdg] = min(pdg_L->pd_pwr[0],
+ pdg_R->pd_pwr[0]) / 2;
+
+ table_max[pdg] = max(pdg_L->pd_pwr[pdg_L->pd_points - 1],
+ pdg_R->pd_pwr[pdg_R->pd_points - 1]) / 2;
+
+ /* Now create the curves on surrounding channels
+ * and interpolate if needed to get the final
+ * curve for this gain on this channel */
+ switch (type) {
+ case AR5K_PWRTABLE_LINEAR_PCDAC:
+ /* Override min/max so that we don't loose
+ * accuracy (don't divide by 2) */
+ table_min[pdg] = min(pdg_L->pd_pwr[0],
+ pdg_R->pd_pwr[0]);
+
+ table_max[pdg] =
+ max(pdg_L->pd_pwr[pdg_L->pd_points - 1],
+ pdg_R->pd_pwr[pdg_R->pd_points - 1]);
+
+ /* Override minimum so that we don't get
+ * out of bounds while extrapolating
+ * below. Don't do this when we have 2
+ * curves and we are on the high power curve
+ * because table_min is ok in this case */
+ if (!(ee->ee_pd_gains[ee_mode] > 1 && pdg == 0)) {
+
+ table_min[pdg] =
+ ath5k_get_linear_pcdac_min(pdg_L->pd_step,
+ pdg_R->pd_step,
+ pdg_L->pd_pwr,
+ pdg_R->pd_pwr);
+
+ /* Don't go too low because we will
+ * miss the upper part of the curve.
+ * Note: 126 = 31.5dB (max power supported)
+ * in 0.25dB units */
+ if (table_max[pdg] - table_min[pdg] > 126)
+ table_min[pdg] = table_max[pdg] - 126;
+ }
+
+ fallthrough;
+ case AR5K_PWRTABLE_PWR_TO_PCDAC:
+ case AR5K_PWRTABLE_PWR_TO_PDADC:
+
+ ath5k_create_power_curve(table_min[pdg],
+ table_max[pdg],
+ pdg_L->pd_pwr,
+ pdg_L->pd_step,
+ pdg_L->pd_points, tmpL, type);
+
+ /* We are in a calibration
+ * pier, no need to interpolate
+ * between freq piers */
+ if (pcinfo_L == pcinfo_R)
+ continue;
+
+ ath5k_create_power_curve(table_min[pdg],
+ table_max[pdg],
+ pdg_R->pd_pwr,
+ pdg_R->pd_step,
+ pdg_R->pd_points, tmpR, type);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* Interpolate between curves
+ * of surrounding freq piers to
+ * get the final curve for this
+ * pd gain. Re-use tmpL for interpolation
+ * output */
+ for (i = 0; (i < (u16) (table_max[pdg] - table_min[pdg])) &&
+ (i < AR5K_EEPROM_POWER_TABLE_SIZE); i++) {
+ tmpL[i] = (u8) ath5k_get_interpolated_value(target,
+ (s16) pcinfo_L->freq,
+ (s16) pcinfo_R->freq,
+ (s16) tmpL[i],
+ (s16) tmpR[i]);
+ }
+ }
+
+ /* Now we have a set of curves for this
+ * channel on tmpL (x range is table_max - table_min
+ * and y values are tmpL[pdg][]) sorted in the same
+ * order as EEPROM (because we've used the backmapping).
+ * So for RF5112 it's from higher power to lower power
+ * and for RF2413 it's from lower power to higher power.
+ * For RF5111 we only have one curve. */
+
+ /* Fill min and max power levels for this
+ * channel by interpolating the values on
+ * surrounding channels to complete the dataset */
+ ah->ah_txpower.txp_min_pwr = ath5k_get_interpolated_value(target,
+ (s16) pcinfo_L->freq,
+ (s16) pcinfo_R->freq,
+ pcinfo_L->min_pwr, pcinfo_R->min_pwr);
+
+ ah->ah_txpower.txp_max_pwr = ath5k_get_interpolated_value(target,
+ (s16) pcinfo_L->freq,
+ (s16) pcinfo_R->freq,
+ pcinfo_L->max_pwr, pcinfo_R->max_pwr);
+
+ /* Fill PCDAC/PDADC table */
+ switch (type) {
+ case AR5K_PWRTABLE_LINEAR_PCDAC:
+ /* For RF5112 we can have one or two curves
+ * and each curve covers a certain power lvl
+ * range so we need to do some more processing */
+ ath5k_combine_linear_pcdac_curves(ah, table_min, table_max,
+ ee->ee_pd_gains[ee_mode]);
+
+ /* Set txp.offset so that we can
+ * match max power value with max
+ * table index */
+ ah->ah_txpower.txp_offset = 64 - (table_max[0] / 2);
+ break;
+ case AR5K_PWRTABLE_PWR_TO_PCDAC:
+ /* We are done for RF5111 since it has only
+ * one curve, just fit the curve on the table */
+ ath5k_fill_pwr_to_pcdac_table(ah, table_min, table_max);
+
+ /* No rate powertable adjustment for RF5111 */
+ ah->ah_txpower.txp_min_idx = 0;
+ ah->ah_txpower.txp_offset = 0;
+ break;
+ case AR5K_PWRTABLE_PWR_TO_PDADC:
+ /* Set PDADC boundaries and fill
+ * final PDADC table */
+ ath5k_combine_pwr_to_pdadc_curves(ah, table_min, table_max,
+ ee->ee_pd_gains[ee_mode]);
+
+ /* Set txp.offset, note that table_min
+ * can be negative */
+ ah->ah_txpower.txp_offset = table_min[0];
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ ah->ah_txpower.txp_setup = true;
+
+ return 0;
+}
+
+/**
+ * ath5k_write_channel_powertable() - Set power table for current channel on hw
+ * @ah: The &struct ath5k_hw
+ * @ee_mode: One of enum ath5k_driver_mode
+ * @type: One of enum ath5k_powertable_type (eeprom.h)
+ */
+static void
+ath5k_write_channel_powertable(struct ath5k_hw *ah, u8 ee_mode, u8 type)
+{
+ if (type == AR5K_PWRTABLE_PWR_TO_PDADC)
+ ath5k_write_pwr_to_pdadc_table(ah, ee_mode);
+ else
+ ath5k_write_pcdac_table(ah);
+}
+
+
+/**
+ * DOC: Per-rate tx power setting
+ *
+ * This is the code that sets the desired tx power limit (below
+ * maximum) on hw for each rate (we also have TPC that sets
+ * power per packet type). We do that by providing an index on the
+ * PCDAC/PDADC table we set up above, for each rate.
+ *
+ * For now we only limit txpower based on maximum tx power
+ * supported by hw (what's inside rate_info) + conformance test
+ * limits. We need to limit this even more, based on regulatory domain
+ * etc to be safe. Normally this is done from above so we don't care
+ * here, all we care is that the tx power we set will be O.K.
+ * for the hw (e.g. won't create noise on PA etc).
+ *
+ * Rate power table contains indices to PCDAC/PDADC table (0.5dB steps -
+ * x values) and is indexed as follows:
+ * rates[0] - rates[7] -> OFDM rates
+ * rates[8] - rates[14] -> CCK rates
+ * rates[15] -> XR rates (they all have the same power)
+ */
+
+/**
+ * ath5k_setup_rate_powertable() - Set up rate power table for a given tx power
+ * @ah: The &struct ath5k_hw
+ * @max_pwr: The maximum tx power requested in 0.5dB steps
+ * @rate_info: The &struct ath5k_rate_pcal_info to fill
+ * @ee_mode: One of enum ath5k_driver_mode
+ */
+static void
+ath5k_setup_rate_powertable(struct ath5k_hw *ah, u16 max_pwr,
+ struct ath5k_rate_pcal_info *rate_info,
+ u8 ee_mode)
+{
+ unsigned int i;
+ u16 *rates;
+ s16 rate_idx_scaled = 0;
+
+ /* max_pwr is power level we got from driver/user in 0.5dB
+ * units, switch to 0.25dB units so we can compare */
+ max_pwr *= 2;
+ max_pwr = min(max_pwr, (u16) ah->ah_txpower.txp_max_pwr) / 2;
+
+ /* apply rate limits */
+ rates = ah->ah_txpower.txp_rates_power_table;
+
+ /* OFDM rates 6 to 24Mb/s */
+ for (i = 0; i < 5; i++)
+ rates[i] = min(max_pwr, rate_info->target_power_6to24);
+
+ /* Rest OFDM rates */
+ rates[5] = min(rates[0], rate_info->target_power_36);
+ rates[6] = min(rates[0], rate_info->target_power_48);
+ rates[7] = min(rates[0], rate_info->target_power_54);
+
+ /* CCK rates */
+ /* 1L */
+ rates[8] = min(rates[0], rate_info->target_power_6to24);
+ /* 2L */
+ rates[9] = min(rates[0], rate_info->target_power_36);
+ /* 2S */
+ rates[10] = min(rates[0], rate_info->target_power_36);
+ /* 5L */
+ rates[11] = min(rates[0], rate_info->target_power_48);
+ /* 5S */
+ rates[12] = min(rates[0], rate_info->target_power_48);
+ /* 11L */
+ rates[13] = min(rates[0], rate_info->target_power_54);
+ /* 11S */
+ rates[14] = min(rates[0], rate_info->target_power_54);
+
+ /* XR rates */
+ rates[15] = min(rates[0], rate_info->target_power_6to24);
+
+ /* CCK rates have different peak to average ratio
+ * so we have to tweak their power so that gainf
+ * correction works ok. For this we use OFDM to
+ * CCK delta from eeprom */
+ if ((ee_mode == AR5K_EEPROM_MODE_11G) &&
+ (ah->ah_phy_revision < AR5K_SREV_PHY_5212A))
+ for (i = 8; i <= 15; i++)
+ rates[i] -= ah->ah_txpower.txp_cck_ofdm_gainf_delta;
+
+ /* Save min/max and current tx power for this channel
+ * in 0.25dB units.
+ *
+ * Note: We use rates[0] for current tx power because
+ * it covers most of the rates, in most cases. It's our
+ * tx power limit and what the user expects to see. */
+ ah->ah_txpower.txp_min_pwr = 2 * rates[7];
+ ah->ah_txpower.txp_cur_pwr = 2 * rates[0];
+
+ /* Set max txpower for correct OFDM operation on all rates
+ * -that is the txpower for 54Mbit-, it's used for the PAPD
+ * gain probe and it's in 0.5dB units */
+ ah->ah_txpower.txp_ofdm = rates[7];
+
+ /* Now that we have all rates setup use table offset to
+ * match the power range set by user with the power indices
+ * on PCDAC/PDADC table */
+ for (i = 0; i < 16; i++) {
+ rate_idx_scaled = rates[i] + ah->ah_txpower.txp_offset;
+ /* Don't get out of bounds */
+ if (rate_idx_scaled > 63)
+ rate_idx_scaled = 63;
+ if (rate_idx_scaled < 0)
+ rate_idx_scaled = 0;
+ rates[i] = rate_idx_scaled;
+ }
+}
+
+
+/**
+ * ath5k_hw_txpower() - Set transmission power limit for a given channel
+ * @ah: The &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
+ * @txpower: Requested tx power in 0.5dB steps
+ *
+ * Combines all of the above to set the requested tx power limit
+ * on hw.
+ */
+static int
+ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel,
+ u8 txpower)
+{
+ struct ath5k_rate_pcal_info rate_info;
+ struct ieee80211_channel *curr_channel = ah->ah_current_channel;
+ int ee_mode;
+ u8 type;
+ int ret;
+
+ if (txpower > AR5K_TUNE_MAX_TXPOWER) {
+ ATH5K_ERR(ah, "invalid tx power: %u\n", txpower);
+ return -EINVAL;
+ }
+
+ ee_mode = ath5k_eeprom_mode_from_channel(ah, channel);
+
+ /* Initialize TX power table */
+ switch (ah->ah_radio) {
+ case AR5K_RF5110:
+ /* TODO */
+ return 0;
+ case AR5K_RF5111:
+ type = AR5K_PWRTABLE_PWR_TO_PCDAC;
+ break;
+ case AR5K_RF5112:
+ type = AR5K_PWRTABLE_LINEAR_PCDAC;
+ break;
+ case AR5K_RF2413:
+ case AR5K_RF5413:
+ case AR5K_RF2316:
+ case AR5K_RF2317:
+ case AR5K_RF2425:
+ type = AR5K_PWRTABLE_PWR_TO_PDADC;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /*
+ * If we don't change channel/mode skip tx powertable calculation
+ * and use the cached one.
+ */
+ if (!ah->ah_txpower.txp_setup ||
+ (channel->hw_value != curr_channel->hw_value) ||
+ (channel->center_freq != curr_channel->center_freq)) {
+ /* Reset TX power values but preserve requested
+ * tx power from above */
+ int requested_txpower = ah->ah_txpower.txp_requested;
+
+ memset(&ah->ah_txpower, 0, sizeof(ah->ah_txpower));
+
+ /* Restore TPC setting and requested tx power */
+ ah->ah_txpower.txp_tpc = AR5K_TUNE_TPC_TXPOWER;
+
+ ah->ah_txpower.txp_requested = requested_txpower;
+
+ /* Calculate the powertable */
+ ret = ath5k_setup_channel_powertable(ah, channel,
+ ee_mode, type);
+ if (ret)
+ return ret;
+ }
+
+ /* Write table on hw */
+ ath5k_write_channel_powertable(ah, ee_mode, type);
+
+ /* Limit max power if we have a CTL available */
+ ath5k_get_max_ctl_power(ah, channel);
+
+ /* FIXME: Antenna reduction stuff */
+
+ /* FIXME: Limit power on turbo modes */
+
+ /* FIXME: TPC scale reduction */
+
+ /* Get surrounding channels for per-rate power table
+ * calibration */
+ ath5k_get_rate_pcal_data(ah, channel, &rate_info);
+
+ /* Setup rate power table */
+ ath5k_setup_rate_powertable(ah, txpower, &rate_info, ee_mode);
+
+ /* Write rate power table on hw */
+ ath5k_hw_reg_write(ah, AR5K_TXPOWER_OFDM(3, 24) |
+ AR5K_TXPOWER_OFDM(2, 16) | AR5K_TXPOWER_OFDM(1, 8) |
+ AR5K_TXPOWER_OFDM(0, 0), AR5K_PHY_TXPOWER_RATE1);
+
+ ath5k_hw_reg_write(ah, AR5K_TXPOWER_OFDM(7, 24) |
+ AR5K_TXPOWER_OFDM(6, 16) | AR5K_TXPOWER_OFDM(5, 8) |
+ AR5K_TXPOWER_OFDM(4, 0), AR5K_PHY_TXPOWER_RATE2);
+
+ ath5k_hw_reg_write(ah, AR5K_TXPOWER_CCK(10, 24) |
+ AR5K_TXPOWER_CCK(9, 16) | AR5K_TXPOWER_CCK(15, 8) |
+ AR5K_TXPOWER_CCK(8, 0), AR5K_PHY_TXPOWER_RATE3);
+
+ ath5k_hw_reg_write(ah, AR5K_TXPOWER_CCK(14, 24) |
+ AR5K_TXPOWER_CCK(13, 16) | AR5K_TXPOWER_CCK(12, 8) |
+ AR5K_TXPOWER_CCK(11, 0), AR5K_PHY_TXPOWER_RATE4);
+
+ /* FIXME: TPC support */
+ if (ah->ah_txpower.txp_tpc) {
+ ath5k_hw_reg_write(ah, AR5K_PHY_TXPOWER_RATE_MAX_TPC_ENABLE |
+ AR5K_TUNE_MAX_TXPOWER, AR5K_PHY_TXPOWER_RATE_MAX);
+
+ ath5k_hw_reg_write(ah,
+ AR5K_REG_MS(AR5K_TUNE_MAX_TXPOWER, AR5K_TPC_ACK) |
+ AR5K_REG_MS(AR5K_TUNE_MAX_TXPOWER, AR5K_TPC_CTS) |
+ AR5K_REG_MS(AR5K_TUNE_MAX_TXPOWER, AR5K_TPC_CHIRP),
+ AR5K_TPC);
+ } else {
+ ath5k_hw_reg_write(ah, AR5K_TUNE_MAX_TXPOWER,
+ AR5K_PHY_TXPOWER_RATE_MAX);
+ }
+
+ return 0;
+}
+
+/**
+ * ath5k_hw_set_txpower_limit() - Set txpower limit for the current channel
+ * @ah: The &struct ath5k_hw
+ * @txpower: The requested tx power limit in 0.5dB steps
+ *
+ * This function provides access to ath5k_hw_txpower to the driver in
+ * case user or an application changes it while PHY is running.
+ */
+int
+ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower)
+{
+ ATH5K_DBG(ah, ATH5K_DEBUG_TXPOWER,
+ "changing txpower to %d\n", txpower);
+
+ return ath5k_hw_txpower(ah, ah->ah_current_channel, txpower);
+}
+
+
+/*************\
+ Init function
+\*************/
+
+/**
+ * ath5k_hw_phy_init() - Initialize PHY
+ * @ah: The &struct ath5k_hw
+ * @channel: The @struct ieee80211_channel
+ * @mode: One of enum ath5k_driver_mode
+ * @fast: Try a fast channel switch instead
+ *
+ * This is the main function used during reset to initialize PHY
+ * or do a fast channel change if possible.
+ *
+ * NOTE: Do not call this one from the driver, it assumes PHY is in a
+ * warm reset state !
+ */
+int
+ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel,
+ u8 mode, bool fast)
+{
+ struct ieee80211_channel *curr_channel;
+ int ret, i;
+ u32 phy_tst1;
+ ret = 0;
+
+ /*
+ * Sanity check for fast flag
+ * Don't try fast channel change when changing modulation
+ * mode/band. We check for chip compatibility on
+ * ath5k_hw_reset.
+ */
+ curr_channel = ah->ah_current_channel;
+ if (fast && (channel->hw_value != curr_channel->hw_value))
+ return -EINVAL;
+
+ /*
+ * On fast channel change we only set the synth parameters
+ * while PHY is running, enable calibration and skip the rest.
+ */
+ if (fast) {
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_RFBUS_REQ,
+ AR5K_PHY_RFBUS_REQ_REQUEST);
+ for (i = 0; i < 100; i++) {
+ if (ath5k_hw_reg_read(ah, AR5K_PHY_RFBUS_GRANT))
+ break;
+ udelay(5);
+ }
+ /* Failed */
+ if (i >= 100)
+ return -EIO;
+
+ /* Set channel and wait for synth */
+ ret = ath5k_hw_channel(ah, channel);
+ if (ret)
+ return ret;
+
+ ath5k_hw_wait_for_synth(ah, channel);
+ }
+
+ /*
+ * Set TX power
+ *
+ * Note: We need to do that before we set
+ * RF buffer settings on 5211/5212+ so that we
+ * properly set curve indices.
+ */
+ ret = ath5k_hw_txpower(ah, channel, ah->ah_txpower.txp_requested ?
+ ah->ah_txpower.txp_requested * 2 :
+ AR5K_TUNE_MAX_TXPOWER);
+ if (ret)
+ return ret;
+
+ /* Write OFDM timings on 5212*/
+ if (ah->ah_version == AR5K_AR5212 &&
+ channel->hw_value != AR5K_MODE_11B) {
+
+ ret = ath5k_hw_write_ofdm_timings(ah, channel);
+ if (ret)
+ return ret;
+
+ /* Spur info is available only from EEPROM versions
+ * greater than 5.3, but the EEPROM routines will use
+ * static values for older versions */
+ if (ah->ah_mac_srev >= AR5K_SREV_AR5424)
+ ath5k_hw_set_spur_mitigation_filter(ah,
+ channel);
+ }
+
+ /* If we used fast channel switching
+ * we are done, release RF bus and
+ * fire up NF calibration.
+ *
+ * Note: Only NF calibration due to
+ * channel change, not AGC calibration
+ * since AGC is still running !
+ */
+ if (fast) {
+ /*
+ * Release RF Bus grant
+ */
+ AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_RFBUS_REQ,
+ AR5K_PHY_RFBUS_REQ_REQUEST);
+
+ /*
+ * Start NF calibration
+ */
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL,
+ AR5K_PHY_AGCCTL_NF);
+
+ return ret;
+ }
+
+ /*
+ * For 5210 we do all initialization using
+ * initvals, so we don't have to modify
+ * any settings (5210 also only supports
+ * a/aturbo modes)
+ */
+ if (ah->ah_version != AR5K_AR5210) {
+
+ /*
+ * Write initial RF gain settings
+ * This should work for both 5111/5112
+ */
+ ret = ath5k_hw_rfgain_init(ah, channel->band);
+ if (ret)
+ return ret;
+
+ usleep_range(1000, 1500);
+
+ /*
+ * Write RF buffer
+ */
+ ret = ath5k_hw_rfregs_init(ah, channel, mode);
+ if (ret)
+ return ret;
+
+ /*Enable/disable 802.11b mode on 5111
+ (enable 2111 frequency converter + CCK)*/
+ if (ah->ah_radio == AR5K_RF5111) {
+ if (mode == AR5K_MODE_11B)
+ AR5K_REG_ENABLE_BITS(ah, AR5K_TXCFG,
+ AR5K_TXCFG_B_MODE);
+ else
+ AR5K_REG_DISABLE_BITS(ah, AR5K_TXCFG,
+ AR5K_TXCFG_B_MODE);
+ }
+
+ } else if (ah->ah_version == AR5K_AR5210) {
+ usleep_range(1000, 1500);
+ /* Disable phy and wait */
+ ath5k_hw_reg_write(ah, AR5K_PHY_ACT_DISABLE, AR5K_PHY_ACT);
+ usleep_range(1000, 1500);
+ }
+
+ /* Set channel on PHY */
+ ret = ath5k_hw_channel(ah, channel);
+ if (ret)
+ return ret;
+
+ /*
+ * Enable the PHY and wait until completion
+ * This includes BaseBand and Synthesizer
+ * activation.
+ */
+ ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT);
+
+ ath5k_hw_wait_for_synth(ah, channel);
+
+ /*
+ * Perform ADC test to see if baseband is ready
+ * Set tx hold and check adc test register
+ */
+ phy_tst1 = ath5k_hw_reg_read(ah, AR5K_PHY_TST1);
+ ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1);
+ for (i = 0; i <= 20; i++) {
+ if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10))
+ break;
+ usleep_range(200, 250);
+ }
+ ath5k_hw_reg_write(ah, phy_tst1, AR5K_PHY_TST1);
+
+ /*
+ * Start automatic gain control calibration
+ *
+ * During AGC calibration RX path is re-routed to
+ * a power detector so we don't receive anything.
+ *
+ * This method is used to calibrate some static offsets
+ * used together with on-the fly I/Q calibration (the
+ * one performed via ath5k_hw_phy_calibrate), which doesn't
+ * interrupt rx path.
+ *
+ * While rx path is re-routed to the power detector we also
+ * start a noise floor calibration to measure the
+ * card's noise floor (the noise we measure when we are not
+ * transmitting or receiving anything).
+ *
+ * If we are in a noisy environment, AGC calibration may time
+ * out and/or noise floor calibration might timeout.
+ */
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL,
+ AR5K_PHY_AGCCTL_CAL | AR5K_PHY_AGCCTL_NF);
+
+ /* At the same time start I/Q calibration for QAM constellation
+ * -no need for CCK- */
+ ah->ah_iq_cal_needed = false;
+ if (!(mode == AR5K_MODE_11B)) {
+ ah->ah_iq_cal_needed = true;
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ,
+ AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15);
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ,
+ AR5K_PHY_IQ_RUN);
+ }
+
+ /* Wait for gain calibration to finish (we check for I/Q calibration
+ * during ath5k_phy_calibrate) */
+ if (ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL,
+ AR5K_PHY_AGCCTL_CAL, 0, false)) {
+ ATH5K_ERR(ah, "gain calibration timeout (%uMHz)\n",
+ channel->center_freq);
+ }
+
+ /* Restore antenna mode */
+ ath5k_hw_set_antenna_mode(ah, ah->ah_ant_mode);
+
+ return ret;
+}
diff --git a/drivers/net/wireless/ath/ath5k/qcu.c b/drivers/net/wireless/ath/ath5k/qcu.c
new file mode 100644
index 000000000..147947f63
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/qcu.c
@@ -0,0 +1,729 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/********************************************\
+Queue Control Unit, DCF Control Unit Functions
+\********************************************/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include "ath5k.h"
+#include "reg.h"
+#include "debug.h"
+#include <linux/log2.h>
+
+/**
+ * DOC: Queue Control Unit (QCU)/DCF Control Unit (DCU) functions
+ *
+ * Here we setup parameters for the 12 available TX queues. Note that
+ * on the various registers we can usually only map the first 10 of them so
+ * basically we have 10 queues to play with. Each queue has a matching
+ * QCU that controls when the queue will get triggered and multiple QCUs
+ * can be mapped to a single DCU that controls the various DFS parameters
+ * for the various queues. In our setup we have a 1:1 mapping between QCUs
+ * and DCUs allowing us to have different DFS settings for each queue.
+ *
+ * When a frame goes into a TX queue, QCU decides when it'll trigger a
+ * transmission based on various criteria (such as how many data we have inside
+ * it's buffer or -if it's a beacon queue- if it's time to fire up the queue
+ * based on TSF etc), DCU adds backoff, IFSes etc and then a scheduler
+ * (arbitrator) decides the priority of each QCU based on it's configuration
+ * (e.g. beacons are always transmitted when they leave DCU bypassing all other
+ * frames from other queues waiting to be transmitted). After a frame leaves
+ * the DCU it goes to PCU for further processing and then to PHY for
+ * the actual transmission.
+ */
+
+
+/******************\
+* Helper functions *
+\******************/
+
+/**
+ * ath5k_hw_num_tx_pending() - Get number of pending frames for a given queue
+ * @ah: The &struct ath5k_hw
+ * @queue: One of enum ath5k_tx_queue_id
+ */
+u32
+ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue)
+{
+ u32 pending;
+ AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
+
+ /* Return if queue is declared inactive */
+ if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE)
+ return false;
+
+ /* XXX: How about AR5K_CFG_TXCNT ? */
+ if (ah->ah_version == AR5K_AR5210)
+ return false;
+
+ pending = ath5k_hw_reg_read(ah, AR5K_QUEUE_STATUS(queue));
+ pending &= AR5K_QCU_STS_FRMPENDCNT;
+
+ /* It's possible to have no frames pending even if TXE
+ * is set. To indicate that q has not stopped return
+ * true */
+ if (!pending && AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, queue))
+ return true;
+
+ return pending;
+}
+
+/**
+ * ath5k_hw_release_tx_queue() - Set a transmit queue inactive
+ * @ah: The &struct ath5k_hw
+ * @queue: One of enum ath5k_tx_queue_id
+ */
+void
+ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue)
+{
+ if (WARN_ON(queue >= ah->ah_capabilities.cap_queues.q_tx_num))
+ return;
+
+ /* This queue will be skipped in further operations */
+ ah->ah_txq[queue].tqi_type = AR5K_TX_QUEUE_INACTIVE;
+ /*For SIMR setup*/
+ AR5K_Q_DISABLE_BITS(ah->ah_txq_status, queue);
+}
+
+/**
+ * ath5k_cw_validate() - Make sure the given cw is valid
+ * @cw_req: The contention window value to check
+ *
+ * Make sure cw is a power of 2 minus 1 and smaller than 1024
+ */
+static u16
+ath5k_cw_validate(u16 cw_req)
+{
+ cw_req = min(cw_req, (u16)1023);
+
+ /* Check if cw_req + 1 a power of 2 */
+ if (is_power_of_2(cw_req + 1))
+ return cw_req;
+
+ /* Check if cw_req is a power of 2 */
+ if (is_power_of_2(cw_req))
+ return cw_req - 1;
+
+ /* If none of the above is correct
+ * find the closest power of 2 */
+ cw_req = (u16) roundup_pow_of_two(cw_req) - 1;
+
+ return cw_req;
+}
+
+/**
+ * ath5k_hw_get_tx_queueprops() - Get properties for a transmit queue
+ * @ah: The &struct ath5k_hw
+ * @queue: One of enum ath5k_tx_queue_id
+ * @queue_info: The &struct ath5k_txq_info to fill
+ */
+int
+ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue,
+ struct ath5k_txq_info *queue_info)
+{
+ memcpy(queue_info, &ah->ah_txq[queue], sizeof(struct ath5k_txq_info));
+ return 0;
+}
+
+/**
+ * ath5k_hw_set_tx_queueprops() - Set properties for a transmit queue
+ * @ah: The &struct ath5k_hw
+ * @queue: One of enum ath5k_tx_queue_id
+ * @qinfo: The &struct ath5k_txq_info to use
+ *
+ * Returns 0 on success or -EIO if queue is inactive
+ */
+int
+ath5k_hw_set_tx_queueprops(struct ath5k_hw *ah, int queue,
+ const struct ath5k_txq_info *qinfo)
+{
+ struct ath5k_txq_info *qi;
+
+ AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
+
+ qi = &ah->ah_txq[queue];
+
+ if (qi->tqi_type == AR5K_TX_QUEUE_INACTIVE)
+ return -EIO;
+
+ /* copy and validate values */
+ qi->tqi_type = qinfo->tqi_type;
+ qi->tqi_subtype = qinfo->tqi_subtype;
+ qi->tqi_flags = qinfo->tqi_flags;
+ /*
+ * According to the docs: Although the AIFS field is 8 bit wide,
+ * the maximum supported value is 0xFC. Setting it higher than that
+ * will cause the DCU to hang.
+ */
+ qi->tqi_aifs = min(qinfo->tqi_aifs, (u8)0xFC);
+ qi->tqi_cw_min = ath5k_cw_validate(qinfo->tqi_cw_min);
+ qi->tqi_cw_max = ath5k_cw_validate(qinfo->tqi_cw_max);
+ qi->tqi_cbr_period = qinfo->tqi_cbr_period;
+ qi->tqi_cbr_overflow_limit = qinfo->tqi_cbr_overflow_limit;
+ qi->tqi_burst_time = qinfo->tqi_burst_time;
+ qi->tqi_ready_time = qinfo->tqi_ready_time;
+
+ /*XXX: Is this supported on 5210 ?*/
+ /*XXX: Is this correct for AR5K_WME_AC_VI,VO ???*/
+ if ((qinfo->tqi_type == AR5K_TX_QUEUE_DATA &&
+ ((qinfo->tqi_subtype == AR5K_WME_AC_VI) ||
+ (qinfo->tqi_subtype == AR5K_WME_AC_VO))) ||
+ qinfo->tqi_type == AR5K_TX_QUEUE_UAPSD)
+ qi->tqi_flags |= AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS;
+
+ return 0;
+}
+
+/**
+ * ath5k_hw_setup_tx_queue() - Initialize a transmit queue
+ * @ah: The &struct ath5k_hw
+ * @queue_type: One of enum ath5k_tx_queue
+ * @queue_info: The &struct ath5k_txq_info to use
+ *
+ * Returns 0 on success, -EINVAL on invalid arguments
+ */
+int
+ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type,
+ struct ath5k_txq_info *queue_info)
+{
+ unsigned int queue;
+ int ret;
+
+ /*
+ * Get queue by type
+ */
+ /* 5210 only has 2 queues */
+ if (ah->ah_capabilities.cap_queues.q_tx_num == 2) {
+ switch (queue_type) {
+ case AR5K_TX_QUEUE_DATA:
+ queue = AR5K_TX_QUEUE_ID_NOQCU_DATA;
+ break;
+ case AR5K_TX_QUEUE_BEACON:
+ case AR5K_TX_QUEUE_CAB:
+ queue = AR5K_TX_QUEUE_ID_NOQCU_BEACON;
+ break;
+ default:
+ return -EINVAL;
+ }
+ } else {
+ switch (queue_type) {
+ case AR5K_TX_QUEUE_DATA:
+ queue = queue_info->tqi_subtype;
+ break;
+ case AR5K_TX_QUEUE_UAPSD:
+ queue = AR5K_TX_QUEUE_ID_UAPSD;
+ break;
+ case AR5K_TX_QUEUE_BEACON:
+ queue = AR5K_TX_QUEUE_ID_BEACON;
+ break;
+ case AR5K_TX_QUEUE_CAB:
+ queue = AR5K_TX_QUEUE_ID_CAB;
+ break;
+ default:
+ return -EINVAL;
+ }
+ }
+
+ /*
+ * Setup internal queue structure
+ */
+ memset(&ah->ah_txq[queue], 0, sizeof(struct ath5k_txq_info));
+ ah->ah_txq[queue].tqi_type = queue_type;
+
+ if (queue_info != NULL) {
+ queue_info->tqi_type = queue_type;
+ ret = ath5k_hw_set_tx_queueprops(ah, queue, queue_info);
+ if (ret)
+ return ret;
+ }
+
+ /*
+ * We use ah_txq_status to hold a temp value for
+ * the Secondary interrupt mask registers on 5211+
+ * check out ath5k_hw_reset_tx_queue
+ */
+ AR5K_Q_ENABLE_BITS(ah->ah_txq_status, queue);
+
+ return queue;
+}
+
+
+/*******************************\
+* Single QCU/DCU initialization *
+\*******************************/
+
+/**
+ * ath5k_hw_set_tx_retry_limits() - Set tx retry limits on DCU
+ * @ah: The &struct ath5k_hw
+ * @queue: One of enum ath5k_tx_queue_id
+ *
+ * This function is used when initializing a queue, to set
+ * retry limits based on ah->ah_retry_* and the chipset used.
+ */
+void
+ath5k_hw_set_tx_retry_limits(struct ath5k_hw *ah,
+ unsigned int queue)
+{
+ /* Single data queue on AR5210 */
+ if (ah->ah_version == AR5K_AR5210) {
+ struct ath5k_txq_info *tq = &ah->ah_txq[queue];
+
+ if (queue > 0)
+ return;
+
+ ath5k_hw_reg_write(ah,
+ (tq->tqi_cw_min << AR5K_NODCU_RETRY_LMT_CW_MIN_S)
+ | AR5K_REG_SM(ah->ah_retry_long,
+ AR5K_NODCU_RETRY_LMT_SLG_RETRY)
+ | AR5K_REG_SM(ah->ah_retry_short,
+ AR5K_NODCU_RETRY_LMT_SSH_RETRY)
+ | AR5K_REG_SM(ah->ah_retry_long,
+ AR5K_NODCU_RETRY_LMT_LG_RETRY)
+ | AR5K_REG_SM(ah->ah_retry_short,
+ AR5K_NODCU_RETRY_LMT_SH_RETRY),
+ AR5K_NODCU_RETRY_LMT);
+ /* DCU on AR5211+ */
+ } else {
+ ath5k_hw_reg_write(ah,
+ AR5K_REG_SM(ah->ah_retry_long,
+ AR5K_DCU_RETRY_LMT_RTS)
+ | AR5K_REG_SM(ah->ah_retry_long,
+ AR5K_DCU_RETRY_LMT_STA_RTS)
+ | AR5K_REG_SM(max(ah->ah_retry_long, ah->ah_retry_short),
+ AR5K_DCU_RETRY_LMT_STA_DATA),
+ AR5K_QUEUE_DFS_RETRY_LIMIT(queue));
+ }
+}
+
+/**
+ * ath5k_hw_reset_tx_queue() - Initialize a single hw queue
+ * @ah: The &struct ath5k_hw
+ * @queue: One of enum ath5k_tx_queue_id
+ *
+ * Set DCF properties for the given transmit queue on DCU
+ * and configures all queue-specific parameters.
+ */
+int
+ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue)
+{
+ struct ath5k_txq_info *tq = &ah->ah_txq[queue];
+
+ AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
+
+ /* Skip if queue inactive or if we are on AR5210
+ * that doesn't have QCU/DCU */
+ if ((ah->ah_version == AR5K_AR5210) ||
+ (tq->tqi_type == AR5K_TX_QUEUE_INACTIVE))
+ return 0;
+
+ /*
+ * Set contention window (cw_min/cw_max)
+ * and arbitrated interframe space (aifs)...
+ */
+ ath5k_hw_reg_write(ah,
+ AR5K_REG_SM(tq->tqi_cw_min, AR5K_DCU_LCL_IFS_CW_MIN) |
+ AR5K_REG_SM(tq->tqi_cw_max, AR5K_DCU_LCL_IFS_CW_MAX) |
+ AR5K_REG_SM(tq->tqi_aifs, AR5K_DCU_LCL_IFS_AIFS),
+ AR5K_QUEUE_DFS_LOCAL_IFS(queue));
+
+ /*
+ * Set tx retry limits for this queue
+ */
+ ath5k_hw_set_tx_retry_limits(ah, queue);
+
+
+ /*
+ * Set misc registers
+ */
+
+ /* Enable DCU to wait for next fragment from QCU */
+ AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue),
+ AR5K_DCU_MISC_FRAG_WAIT);
+
+ /* On Maui and Spirit use the global seqnum on DCU */
+ if (ah->ah_mac_version < AR5K_SREV_AR5211)
+ AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue),
+ AR5K_DCU_MISC_SEQNUM_CTL);
+
+ /* Constant bit rate period */
+ if (tq->tqi_cbr_period) {
+ ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_cbr_period,
+ AR5K_QCU_CBRCFG_INTVAL) |
+ AR5K_REG_SM(tq->tqi_cbr_overflow_limit,
+ AR5K_QCU_CBRCFG_ORN_THRES),
+ AR5K_QUEUE_CBRCFG(queue));
+
+ AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
+ AR5K_QCU_MISC_FRSHED_CBR);
+
+ if (tq->tqi_cbr_overflow_limit)
+ AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
+ AR5K_QCU_MISC_CBR_THRES_ENABLE);
+ }
+
+ /* Ready time interval */
+ if (tq->tqi_ready_time && (tq->tqi_type != AR5K_TX_QUEUE_CAB))
+ ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_ready_time,
+ AR5K_QCU_RDYTIMECFG_INTVAL) |
+ AR5K_QCU_RDYTIMECFG_ENABLE,
+ AR5K_QUEUE_RDYTIMECFG(queue));
+
+ if (tq->tqi_burst_time) {
+ ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_burst_time,
+ AR5K_DCU_CHAN_TIME_DUR) |
+ AR5K_DCU_CHAN_TIME_ENABLE,
+ AR5K_QUEUE_DFS_CHANNEL_TIME(queue));
+
+ if (tq->tqi_flags & AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE)
+ AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
+ AR5K_QCU_MISC_RDY_VEOL_POLICY);
+ }
+
+ /* Enable/disable Post frame backoff */
+ if (tq->tqi_flags & AR5K_TXQ_FLAG_BACKOFF_DISABLE)
+ ath5k_hw_reg_write(ah, AR5K_DCU_MISC_POST_FR_BKOFF_DIS,
+ AR5K_QUEUE_DFS_MISC(queue));
+
+ /* Enable/disable fragmentation burst backoff */
+ if (tq->tqi_flags & AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE)
+ ath5k_hw_reg_write(ah, AR5K_DCU_MISC_BACKOFF_FRAG,
+ AR5K_QUEUE_DFS_MISC(queue));
+
+ /*
+ * Set registers by queue type
+ */
+ switch (tq->tqi_type) {
+ case AR5K_TX_QUEUE_BEACON:
+ AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
+ AR5K_QCU_MISC_FRSHED_DBA_GT |
+ AR5K_QCU_MISC_CBREXP_BCN_DIS |
+ AR5K_QCU_MISC_BCN_ENABLE);
+
+ AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue),
+ (AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL <<
+ AR5K_DCU_MISC_ARBLOCK_CTL_S) |
+ AR5K_DCU_MISC_ARBLOCK_IGNORE |
+ AR5K_DCU_MISC_POST_FR_BKOFF_DIS |
+ AR5K_DCU_MISC_BCN_ENABLE);
+ break;
+
+ case AR5K_TX_QUEUE_CAB:
+ /* XXX: use BCN_SENT_GT, if we can figure out how */
+ AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
+ AR5K_QCU_MISC_FRSHED_DBA_GT |
+ AR5K_QCU_MISC_CBREXP_DIS |
+ AR5K_QCU_MISC_CBREXP_BCN_DIS);
+
+ ath5k_hw_reg_write(ah, ((tq->tqi_ready_time -
+ (AR5K_TUNE_SW_BEACON_RESP -
+ AR5K_TUNE_DMA_BEACON_RESP) -
+ AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF) * 1024) |
+ AR5K_QCU_RDYTIMECFG_ENABLE,
+ AR5K_QUEUE_RDYTIMECFG(queue));
+
+ AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue),
+ (AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL <<
+ AR5K_DCU_MISC_ARBLOCK_CTL_S));
+ break;
+
+ case AR5K_TX_QUEUE_UAPSD:
+ AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
+ AR5K_QCU_MISC_CBREXP_DIS);
+ break;
+
+ case AR5K_TX_QUEUE_DATA:
+ default:
+ break;
+ }
+
+ /* TODO: Handle frame compression */
+
+ /*
+ * Enable interrupts for this tx queue
+ * in the secondary interrupt mask registers
+ */
+ if (tq->tqi_flags & AR5K_TXQ_FLAG_TXOKINT_ENABLE)
+ AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txok, queue);
+
+ if (tq->tqi_flags & AR5K_TXQ_FLAG_TXERRINT_ENABLE)
+ AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txerr, queue);
+
+ if (tq->tqi_flags & AR5K_TXQ_FLAG_TXURNINT_ENABLE)
+ AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txurn, queue);
+
+ if (tq->tqi_flags & AR5K_TXQ_FLAG_TXDESCINT_ENABLE)
+ AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txdesc, queue);
+
+ if (tq->tqi_flags & AR5K_TXQ_FLAG_TXEOLINT_ENABLE)
+ AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txeol, queue);
+
+ if (tq->tqi_flags & AR5K_TXQ_FLAG_CBRORNINT_ENABLE)
+ AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_cbrorn, queue);
+
+ if (tq->tqi_flags & AR5K_TXQ_FLAG_CBRURNINT_ENABLE)
+ AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_cbrurn, queue);
+
+ if (tq->tqi_flags & AR5K_TXQ_FLAG_QTRIGINT_ENABLE)
+ AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_qtrig, queue);
+
+ if (tq->tqi_flags & AR5K_TXQ_FLAG_TXNOFRMINT_ENABLE)
+ AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_nofrm, queue);
+
+ /* Update secondary interrupt mask registers */
+
+ /* Filter out inactive queues */
+ ah->ah_txq_imr_txok &= ah->ah_txq_status;
+ ah->ah_txq_imr_txerr &= ah->ah_txq_status;
+ ah->ah_txq_imr_txurn &= ah->ah_txq_status;
+ ah->ah_txq_imr_txdesc &= ah->ah_txq_status;
+ ah->ah_txq_imr_txeol &= ah->ah_txq_status;
+ ah->ah_txq_imr_cbrorn &= ah->ah_txq_status;
+ ah->ah_txq_imr_cbrurn &= ah->ah_txq_status;
+ ah->ah_txq_imr_qtrig &= ah->ah_txq_status;
+ ah->ah_txq_imr_nofrm &= ah->ah_txq_status;
+
+ ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txok,
+ AR5K_SIMR0_QCU_TXOK) |
+ AR5K_REG_SM(ah->ah_txq_imr_txdesc,
+ AR5K_SIMR0_QCU_TXDESC),
+ AR5K_SIMR0);
+
+ ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txerr,
+ AR5K_SIMR1_QCU_TXERR) |
+ AR5K_REG_SM(ah->ah_txq_imr_txeol,
+ AR5K_SIMR1_QCU_TXEOL),
+ AR5K_SIMR1);
+
+ /* Update SIMR2 but don't overwrite rest simr2 settings */
+ AR5K_REG_DISABLE_BITS(ah, AR5K_SIMR2, AR5K_SIMR2_QCU_TXURN);
+ AR5K_REG_ENABLE_BITS(ah, AR5K_SIMR2,
+ AR5K_REG_SM(ah->ah_txq_imr_txurn,
+ AR5K_SIMR2_QCU_TXURN));
+
+ ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_cbrorn,
+ AR5K_SIMR3_QCBRORN) |
+ AR5K_REG_SM(ah->ah_txq_imr_cbrurn,
+ AR5K_SIMR3_QCBRURN),
+ AR5K_SIMR3);
+
+ ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_qtrig,
+ AR5K_SIMR4_QTRIG), AR5K_SIMR4);
+
+ /* Set TXNOFRM_QCU for the queues with TXNOFRM enabled */
+ ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_nofrm,
+ AR5K_TXNOFRM_QCU), AR5K_TXNOFRM);
+
+ /* No queue has TXNOFRM enabled, disable the interrupt
+ * by setting AR5K_TXNOFRM to zero */
+ if (ah->ah_txq_imr_nofrm == 0)
+ ath5k_hw_reg_write(ah, 0, AR5K_TXNOFRM);
+
+ /* Set QCU mask for this DCU to save power */
+ AR5K_REG_WRITE_Q(ah, AR5K_QUEUE_QCUMASK(queue), queue);
+
+ return 0;
+}
+
+
+/**************************\
+* Global QCU/DCU functions *
+\**************************/
+
+/**
+ * ath5k_hw_set_ifs_intervals() - Set global inter-frame spaces on DCU
+ * @ah: The &struct ath5k_hw
+ * @slot_time: Slot time in us
+ *
+ * Sets the global IFS intervals on DCU (also works on AR5210) for
+ * the given slot time and the current bwmode.
+ */
+int ath5k_hw_set_ifs_intervals(struct ath5k_hw *ah, unsigned int slot_time)
+{
+ struct ieee80211_channel *channel = ah->ah_current_channel;
+ enum nl80211_band band;
+ struct ieee80211_supported_band *sband;
+ struct ieee80211_rate *rate;
+ u32 ack_tx_time, eifs, eifs_clock, sifs, sifs_clock;
+ u32 slot_time_clock = ath5k_hw_htoclock(ah, slot_time);
+ u32 rate_flags, i;
+
+ if (slot_time < 6 || slot_time_clock > AR5K_SLOT_TIME_MAX)
+ return -EINVAL;
+
+ sifs = ath5k_hw_get_default_sifs(ah);
+ sifs_clock = ath5k_hw_htoclock(ah, sifs - 2);
+
+ /* EIFS
+ * Txtime of ack at lowest rate + SIFS + DIFS
+ * (DIFS = SIFS + 2 * Slot time)
+ *
+ * Note: HAL has some predefined values for EIFS
+ * Turbo: (37 + 2 * 6)
+ * Default: (74 + 2 * 9)
+ * Half: (149 + 2 * 13)
+ * Quarter: (298 + 2 * 21)
+ *
+ * (74 + 2 * 6) for AR5210 default and turbo !
+ *
+ * According to the formula we have
+ * ack_tx_time = 25 for turbo and
+ * ack_tx_time = 42.5 * clock multiplier
+ * for default/half/quarter.
+ *
+ * This can't be right, 42 is what we would get
+ * from ath5k_hw_get_frame_dur_for_bwmode or
+ * ieee80211_generic_frame_duration for zero frame
+ * length and without SIFS !
+ *
+ * Also we have different lowest rate for 802.11a
+ */
+ if (channel->band == NL80211_BAND_5GHZ)
+ band = NL80211_BAND_5GHZ;
+ else
+ band = NL80211_BAND_2GHZ;
+
+ switch (ah->ah_bwmode) {
+ case AR5K_BWMODE_5MHZ:
+ rate_flags = IEEE80211_RATE_SUPPORTS_5MHZ;
+ break;
+ case AR5K_BWMODE_10MHZ:
+ rate_flags = IEEE80211_RATE_SUPPORTS_10MHZ;
+ break;
+ default:
+ rate_flags = 0;
+ break;
+ }
+ sband = &ah->sbands[band];
+ rate = NULL;
+ for (i = 0; i < sband->n_bitrates; i++) {
+ if ((rate_flags & sband->bitrates[i].flags) != rate_flags)
+ continue;
+ rate = &sband->bitrates[i];
+ break;
+ }
+ if (WARN_ON(!rate))
+ return -EINVAL;
+
+ ack_tx_time = ath5k_hw_get_frame_duration(ah, band, 10, rate, false);
+
+ /* ack_tx_time includes an SIFS already */
+ eifs = ack_tx_time + sifs + 2 * slot_time;
+ eifs_clock = ath5k_hw_htoclock(ah, eifs);
+
+ /* Set IFS settings on AR5210 */
+ if (ah->ah_version == AR5K_AR5210) {
+ u32 pifs, pifs_clock, difs, difs_clock;
+
+ /* Set slot time */
+ ath5k_hw_reg_write(ah, slot_time_clock, AR5K_SLOT_TIME);
+
+ /* Set EIFS */
+ eifs_clock = AR5K_REG_SM(eifs_clock, AR5K_IFS1_EIFS);
+
+ /* PIFS = Slot time + SIFS */
+ pifs = slot_time + sifs;
+ pifs_clock = ath5k_hw_htoclock(ah, pifs);
+ pifs_clock = AR5K_REG_SM(pifs_clock, AR5K_IFS1_PIFS);
+
+ /* DIFS = SIFS + 2 * Slot time */
+ difs = sifs + 2 * slot_time;
+ difs_clock = ath5k_hw_htoclock(ah, difs);
+
+ /* Set SIFS/DIFS */
+ ath5k_hw_reg_write(ah, (difs_clock <<
+ AR5K_IFS0_DIFS_S) | sifs_clock,
+ AR5K_IFS0);
+
+ /* Set PIFS/EIFS and preserve AR5K_INIT_CARR_SENSE_EN */
+ ath5k_hw_reg_write(ah, pifs_clock | eifs_clock |
+ (AR5K_INIT_CARR_SENSE_EN << AR5K_IFS1_CS_EN_S),
+ AR5K_IFS1);
+
+ return 0;
+ }
+
+ /* Set IFS slot time */
+ ath5k_hw_reg_write(ah, slot_time_clock, AR5K_DCU_GBL_IFS_SLOT);
+
+ /* Set EIFS interval */
+ ath5k_hw_reg_write(ah, eifs_clock, AR5K_DCU_GBL_IFS_EIFS);
+
+ /* Set SIFS interval in usecs */
+ AR5K_REG_WRITE_BITS(ah, AR5K_DCU_GBL_IFS_MISC,
+ AR5K_DCU_GBL_IFS_MISC_SIFS_DUR_USEC,
+ sifs);
+
+ /* Set SIFS interval in clock cycles */
+ ath5k_hw_reg_write(ah, sifs_clock, AR5K_DCU_GBL_IFS_SIFS);
+
+ return 0;
+}
+
+
+/**
+ * ath5k_hw_init_queues() - Initialize tx queues
+ * @ah: The &struct ath5k_hw
+ *
+ * Initializes all tx queues based on information on
+ * ah->ah_txq* set by the driver
+ */
+int
+ath5k_hw_init_queues(struct ath5k_hw *ah)
+{
+ int i, ret;
+
+ /* TODO: HW Compression support for data queues */
+ /* TODO: Burst prefetch for data queues */
+
+ /*
+ * Reset queues and start beacon timers at the end of the reset routine
+ * This also sets QCU mask on each DCU for 1:1 qcu to dcu mapping
+ * Note: If we want we can assign multiple qcus on one dcu.
+ */
+ if (ah->ah_version != AR5K_AR5210)
+ for (i = 0; i < ah->ah_capabilities.cap_queues.q_tx_num; i++) {
+ ret = ath5k_hw_reset_tx_queue(ah, i);
+ if (ret) {
+ ATH5K_ERR(ah,
+ "failed to reset TX queue #%d\n", i);
+ return ret;
+ }
+ }
+ else
+ /* No QCU/DCU on AR5210, just set tx
+ * retry limits. We set IFS parameters
+ * on ath5k_hw_set_ifs_intervals */
+ ath5k_hw_set_tx_retry_limits(ah, 0);
+
+ /* Set the turbo flag when operating on 40MHz */
+ if (ah->ah_bwmode == AR5K_BWMODE_40MHZ)
+ AR5K_REG_ENABLE_BITS(ah, AR5K_DCU_GBL_IFS_MISC,
+ AR5K_DCU_GBL_IFS_MISC_TURBO_MODE);
+
+ /* If we didn't set IFS timings through
+ * ath5k_hw_set_coverage_class make sure
+ * we set them here */
+ if (!ah->ah_coverage_class) {
+ unsigned int slot_time = ath5k_hw_get_default_slottime(ah);
+ ath5k_hw_set_ifs_intervals(ah, slot_time);
+ }
+
+ return 0;
+}
diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h
new file mode 100644
index 000000000..0ea1608b4
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/reg.h
@@ -0,0 +1,2604 @@
+/*
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2007-2008 Michael Taylor <mike.taylor@apprion.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/*
+ * Register values for Atheros 5210/5211/5212 cards from OpenBSD's ar5k
+ * maintained by Reyk Floeter
+ *
+ * I tried to document those registers by looking at ar5k code, some
+ * 802.11 (802.11e mostly) papers and by reading various public available
+ * Atheros presentations and papers like these:
+ *
+ * 5210 - http://nova.stanford.edu/~bbaas/ps/isscc2002_slides.pdf
+ *
+ * 5211 - http://www.hotchips.org/archives/hc14/3_Tue/16_mcfarland.pdf
+ *
+ * This file also contains register values found on a memory dump of
+ * Atheros's ART program (Atheros Radio Test), on ath9k, on legacy-hal
+ * released by Atheros and on various debug messages found on the net.
+ */
+
+#include "../reg.h"
+
+/*====MAC DMA REGISTERS====*/
+
+/*
+ * AR5210-Specific TXDP registers
+ * 5210 has only 2 transmit queues so no DCU/QCU, just
+ * 2 transmit descriptor pointers...
+ */
+#define AR5K_NOQCU_TXDP0 0x0000 /* Queue 0 - data */
+#define AR5K_NOQCU_TXDP1 0x0004 /* Queue 1 - beacons */
+
+/*
+ * Mac Control Register
+ */
+#define AR5K_CR 0x0008 /* Register Address */
+#define AR5K_CR_TXE0 0x00000001 /* TX Enable for queue 0 on 5210 */
+#define AR5K_CR_TXE1 0x00000002 /* TX Enable for queue 1 on 5210 */
+#define AR5K_CR_RXE 0x00000004 /* RX Enable */
+#define AR5K_CR_TXD0 0x00000008 /* TX Disable for queue 0 on 5210 */
+#define AR5K_CR_TXD1 0x00000010 /* TX Disable for queue 1 on 5210 */
+#define AR5K_CR_RXD 0x00000020 /* RX Disable */
+#define AR5K_CR_SWI 0x00000040 /* Software Interrupt */
+
+/*
+ * RX Descriptor Pointer register
+ */
+#define AR5K_RXDP 0x000c
+
+/*
+ * Configuration and status register
+ */
+#define AR5K_CFG 0x0014 /* Register Address */
+#define AR5K_CFG_SWTD 0x00000001 /* Byte-swap TX descriptor (for big endian archs) */
+#define AR5K_CFG_SWTB 0x00000002 /* Byte-swap TX buffer */
+#define AR5K_CFG_SWRD 0x00000004 /* Byte-swap RX descriptor */
+#define AR5K_CFG_SWRB 0x00000008 /* Byte-swap RX buffer */
+#define AR5K_CFG_SWRG 0x00000010 /* Byte-swap Register access */
+#define AR5K_CFG_IBSS 0x00000020 /* 0-BSS, 1-IBSS [5211+] */
+#define AR5K_CFG_PHY_OK 0x00000100 /* [5211+] */
+#define AR5K_CFG_EEBS 0x00000200 /* EEPROM is busy */
+#define AR5K_CFG_CLKGD 0x00000400 /* Clock gated (Disable dynamic clock) */
+#define AR5K_CFG_TXCNT 0x00007800 /* Tx frame count (?) [5210] */
+#define AR5K_CFG_TXCNT_S 11
+#define AR5K_CFG_TXFSTAT 0x00008000 /* Tx frame status (?) [5210] */
+#define AR5K_CFG_TXFSTRT 0x00010000 /* [5210] */
+#define AR5K_CFG_PCI_THRES 0x00060000 /* PCI Master req q threshold [5211+] */
+#define AR5K_CFG_PCI_THRES_S 17
+
+/*
+ * Interrupt enable register
+ */
+#define AR5K_IER 0x0024 /* Register Address */
+#define AR5K_IER_DISABLE 0x00000000 /* Disable card interrupts */
+#define AR5K_IER_ENABLE 0x00000001 /* Enable card interrupts */
+
+
+/*
+ * 0x0028 is Beacon Control Register on 5210
+ * and first RTS duration register on 5211
+ */
+
+/*
+ * Beacon control register [5210]
+ */
+#define AR5K_BCR 0x0028 /* Register Address */
+#define AR5K_BCR_AP 0x00000000 /* AP mode */
+#define AR5K_BCR_ADHOC 0x00000001 /* Ad-Hoc mode */
+#define AR5K_BCR_BDMAE 0x00000002 /* DMA enable */
+#define AR5K_BCR_TQ1FV 0x00000004 /* Use Queue1 for CAB traffic */
+#define AR5K_BCR_TQ1V 0x00000008 /* Use Queue1 for Beacon traffic */
+#define AR5K_BCR_BCGET 0x00000010
+
+/*
+ * First RTS duration register [5211]
+ */
+#define AR5K_RTSD0 0x0028 /* Register Address */
+#define AR5K_RTSD0_6 0x000000ff /* 6Mb RTS duration mask (?) */
+#define AR5K_RTSD0_6_S 0 /* 6Mb RTS duration shift (?) */
+#define AR5K_RTSD0_9 0x0000ff00 /* 9Mb*/
+#define AR5K_RTSD0_9_S 8
+#define AR5K_RTSD0_12 0x00ff0000 /* 12Mb*/
+#define AR5K_RTSD0_12_S 16
+#define AR5K_RTSD0_18 0xff000000 /* 16Mb*/
+#define AR5K_RTSD0_18_S 24
+
+
+/*
+ * 0x002c is Beacon Status Register on 5210
+ * and second RTS duration register on 5211
+ */
+
+/*
+ * Beacon status register [5210]
+ *
+ * As i can see in ar5k_ar5210_tx_start Reyk uses some of the values of BCR
+ * for this register, so i guess TQ1V,TQ1FV and BDMAE have the same meaning
+ * here and SNP/SNAP means "snapshot" (so this register gets synced with BCR).
+ * So SNAPPEDBCRVALID should also stand for "snapped BCR -values- valid", so i
+ * renamed it to SNAPSHOTSVALID to make more sense. I really have no idea what
+ * else can it be. I also renamed SNPBCMD to SNPADHOC to match BCR.
+ */
+#define AR5K_BSR 0x002c /* Register Address */
+#define AR5K_BSR_BDLYSW 0x00000001 /* SW Beacon delay (?) */
+#define AR5K_BSR_BDLYDMA 0x00000002 /* DMA Beacon delay (?) */
+#define AR5K_BSR_TXQ1F 0x00000004 /* Beacon queue (1) finished */
+#define AR5K_BSR_ATIMDLY 0x00000008 /* ATIM delay (?) */
+#define AR5K_BSR_SNPADHOC 0x00000100 /* Ad-hoc mode set (?) */
+#define AR5K_BSR_SNPBDMAE 0x00000200 /* Beacon DMA enabled (?) */
+#define AR5K_BSR_SNPTQ1FV 0x00000400 /* Queue1 is used for CAB traffic (?) */
+#define AR5K_BSR_SNPTQ1V 0x00000800 /* Queue1 is used for Beacon traffic (?) */
+#define AR5K_BSR_SNAPSHOTSVALID 0x00001000 /* BCR snapshots are valid (?) */
+#define AR5K_BSR_SWBA_CNT 0x00ff0000
+
+/*
+ * Second RTS duration register [5211]
+ */
+#define AR5K_RTSD1 0x002c /* Register Address */
+#define AR5K_RTSD1_24 0x000000ff /* 24Mb */
+#define AR5K_RTSD1_24_S 0
+#define AR5K_RTSD1_36 0x0000ff00 /* 36Mb */
+#define AR5K_RTSD1_36_S 8
+#define AR5K_RTSD1_48 0x00ff0000 /* 48Mb */
+#define AR5K_RTSD1_48_S 16
+#define AR5K_RTSD1_54 0xff000000 /* 54Mb */
+#define AR5K_RTSD1_54_S 24
+
+
+/*
+ * Transmit configuration register
+ */
+#define AR5K_TXCFG 0x0030 /* Register Address */
+#define AR5K_TXCFG_SDMAMR 0x00000007 /* DMA size (read) */
+#define AR5K_TXCFG_SDMAMR_S 0
+#define AR5K_TXCFG_B_MODE 0x00000008 /* Set b mode for 5111 (enable 2111) */
+#define AR5K_TXCFG_TXFSTP 0x00000008 /* TX DMA full Stop [5210] */
+#define AR5K_TXCFG_TXFULL 0x000003f0 /* TX Trigger level mask */
+#define AR5K_TXCFG_TXFULL_S 4
+#define AR5K_TXCFG_TXFULL_0B 0x00000000
+#define AR5K_TXCFG_TXFULL_64B 0x00000010
+#define AR5K_TXCFG_TXFULL_128B 0x00000020
+#define AR5K_TXCFG_TXFULL_192B 0x00000030
+#define AR5K_TXCFG_TXFULL_256B 0x00000040
+#define AR5K_TXCFG_TXCONT_EN 0x00000080
+#define AR5K_TXCFG_DMASIZE 0x00000100 /* Flag for passing DMA size [5210] */
+#define AR5K_TXCFG_JUMBO_DESC_EN 0x00000400 /* Enable jumbo tx descriptors [5211+] */
+#define AR5K_TXCFG_ADHOC_BCN_ATIM 0x00000800 /* Adhoc Beacon ATIM Policy */
+#define AR5K_TXCFG_ATIM_WINDOW_DEF_DIS 0x00001000 /* Disable ATIM window defer [5211+] */
+#define AR5K_TXCFG_RTSRND 0x00001000 /* [5211+] */
+#define AR5K_TXCFG_FRMPAD_DIS 0x00002000 /* [5211+] */
+#define AR5K_TXCFG_RDY_CBR_DIS 0x00004000 /* Ready time CBR disable [5211+] */
+#define AR5K_TXCFG_JUMBO_FRM_MODE 0x00008000 /* Jumbo frame mode [5211+] */
+#define AR5K_TXCFG_DCU_DBL_BUF_DIS 0x00008000 /* Disable double buffering on DCU */
+#define AR5K_TXCFG_DCU_CACHING_DIS 0x00010000 /* Disable DCU caching */
+
+/*
+ * Receive configuration register
+ */
+#define AR5K_RXCFG 0x0034 /* Register Address */
+#define AR5K_RXCFG_SDMAMW 0x00000007 /* DMA size (write) */
+#define AR5K_RXCFG_SDMAMW_S 0
+#define AR5K_RXCFG_ZLFDMA 0x00000008 /* Enable Zero-length frame DMA */
+#define AR5K_RXCFG_DEF_ANTENNA 0x00000010 /* Default antenna (?) */
+#define AR5K_RXCFG_JUMBO_RXE 0x00000020 /* Enable jumbo rx descriptors [5211+] */
+#define AR5K_RXCFG_JUMBO_WRAP 0x00000040 /* Wrap jumbo frames [5211+] */
+#define AR5K_RXCFG_SLE_ENTRY 0x00000080 /* Sleep entry policy */
+
+/*
+ * Receive jumbo descriptor last address register
+ * Only found in 5211 (?)
+ */
+#define AR5K_RXJLA 0x0038
+
+/*
+ * MIB control register
+ */
+#define AR5K_MIBC 0x0040 /* Register Address */
+#define AR5K_MIBC_COW 0x00000001 /* Counter Overflow Warning */
+#define AR5K_MIBC_FMC 0x00000002 /* Freeze MIB Counters */
+#define AR5K_MIBC_CMC 0x00000004 /* Clear MIB Counters */
+#define AR5K_MIBC_MCS 0x00000008 /* MIB counter strobe, increment all */
+
+/*
+ * Timeout prescale register
+ */
+#define AR5K_TOPS 0x0044
+#define AR5K_TOPS_M 0x0000ffff
+
+/*
+ * Receive timeout register (no frame received)
+ */
+#define AR5K_RXNOFRM 0x0048
+#define AR5K_RXNOFRM_M 0x000003ff
+
+/*
+ * Transmit timeout register (no frame sent)
+ */
+#define AR5K_TXNOFRM 0x004c
+#define AR5K_TXNOFRM_M 0x000003ff
+#define AR5K_TXNOFRM_QCU 0x000ffc00
+#define AR5K_TXNOFRM_QCU_S 10
+
+/*
+ * Receive frame gap timeout register
+ */
+#define AR5K_RPGTO 0x0050
+#define AR5K_RPGTO_M 0x000003ff
+
+/*
+ * Receive frame count limit register
+ */
+#define AR5K_RFCNT 0x0054
+#define AR5K_RFCNT_M 0x0000001f /* [5211+] (?) */
+#define AR5K_RFCNT_RFCL 0x0000000f /* [5210] */
+
+/*
+ * Misc settings register
+ * (reserved0-3)
+ */
+#define AR5K_MISC 0x0058 /* Register Address */
+#define AR5K_MISC_DMA_OBS_M 0x000001e0
+#define AR5K_MISC_DMA_OBS_S 5
+#define AR5K_MISC_MISC_OBS_M 0x00000e00
+#define AR5K_MISC_MISC_OBS_S 9
+#define AR5K_MISC_MAC_OBS_LSB_M 0x00007000
+#define AR5K_MISC_MAC_OBS_LSB_S 12
+#define AR5K_MISC_MAC_OBS_MSB_M 0x00038000
+#define AR5K_MISC_MAC_OBS_MSB_S 15
+#define AR5K_MISC_LED_DECAY 0x001c0000 /* [5210] */
+#define AR5K_MISC_LED_BLINK 0x00e00000 /* [5210] */
+
+/*
+ * QCU/DCU clock gating register (5311)
+ * (reserved4-5)
+ */
+#define AR5K_QCUDCU_CLKGT 0x005c /* Register Address (?) */
+#define AR5K_QCUDCU_CLKGT_QCU 0x0000ffff /* Mask for QCU clock */
+#define AR5K_QCUDCU_CLKGT_DCU 0x07ff0000 /* Mask for DCU clock */
+
+/*
+ * Interrupt Status Registers
+ *
+ * For 5210 there is only one status register but for
+ * 5211/5212 we have one primary and 4 secondary registers.
+ * So we have AR5K_ISR for 5210 and AR5K_PISR /SISRx for 5211/5212.
+ * Most of these bits are common for all chipsets.
+ *
+ * NOTE: On 5211+ TXOK, TXDESC, TXERR, TXEOL and TXURN contain
+ * the logical OR from per-queue interrupt bits found on SISR registers
+ * (see below).
+ */
+#define AR5K_ISR 0x001c /* Register Address [5210] */
+#define AR5K_PISR 0x0080 /* Register Address [5211+] */
+#define AR5K_ISR_RXOK 0x00000001 /* Frame successfully received */
+#define AR5K_ISR_RXDESC 0x00000002 /* RX descriptor request */
+#define AR5K_ISR_RXERR 0x00000004 /* Receive error */
+#define AR5K_ISR_RXNOFRM 0x00000008 /* No frame received (receive timeout) */
+#define AR5K_ISR_RXEOL 0x00000010 /* Empty RX descriptor */
+#define AR5K_ISR_RXORN 0x00000020 /* Receive FIFO overrun */
+#define AR5K_ISR_TXOK 0x00000040 /* Frame successfully transmitted */
+#define AR5K_ISR_TXDESC 0x00000080 /* TX descriptor request */
+#define AR5K_ISR_TXERR 0x00000100 /* Transmit error */
+#define AR5K_ISR_TXNOFRM 0x00000200 /* No frame transmitted (transmit timeout)
+ * NOTE: We don't have per-queue info for this
+ * one, but we can enable it per-queue through
+ * TXNOFRM_QCU field on TXNOFRM register */
+#define AR5K_ISR_TXEOL 0x00000400 /* Empty TX descriptor */
+#define AR5K_ISR_TXURN 0x00000800 /* Transmit FIFO underrun */
+#define AR5K_ISR_MIB 0x00001000 /* Update MIB counters */
+#define AR5K_ISR_SWI 0x00002000 /* Software interrupt */
+#define AR5K_ISR_RXPHY 0x00004000 /* PHY error */
+#define AR5K_ISR_RXKCM 0x00008000 /* RX Key cache miss */
+#define AR5K_ISR_SWBA 0x00010000 /* Software beacon alert */
+#define AR5K_ISR_BRSSI 0x00020000 /* Beacon rssi below threshold (?) */
+#define AR5K_ISR_BMISS 0x00040000 /* Beacon missed */
+#define AR5K_ISR_HIUERR 0x00080000 /* Host Interface Unit error [5211+]
+ * 'or' of MCABT, SSERR, DPERR from SISR2 */
+#define AR5K_ISR_BNR 0x00100000 /* Beacon not ready [5211+] */
+#define AR5K_ISR_MCABT 0x00100000 /* Master Cycle Abort [5210] */
+#define AR5K_ISR_RXCHIRP 0x00200000 /* CHIRP Received [5212+] */
+#define AR5K_ISR_SSERR 0x00200000 /* Signaled System Error [5210] */
+#define AR5K_ISR_DPERR 0x00400000 /* Bus parity error [5210] */
+#define AR5K_ISR_RXDOPPLER 0x00400000 /* Doppler chirp received [5212+] */
+#define AR5K_ISR_TIM 0x00800000 /* [5211+] */
+#define AR5K_ISR_BCNMISC 0x00800000 /* Misc beacon related interrupt
+ * 'or' of TIM, CAB_END, DTIM_SYNC, BCN_TIMEOUT,
+ * CAB_TIMEOUT and DTIM bits from SISR2 [5212+] */
+#define AR5K_ISR_GPIO 0x01000000 /* GPIO (rf kill) */
+#define AR5K_ISR_QCBRORN 0x02000000 /* QCU CBR overrun [5211+] */
+#define AR5K_ISR_QCBRURN 0x04000000 /* QCU CBR underrun [5211+] */
+#define AR5K_ISR_QTRIG 0x08000000 /* QCU scheduling trigger [5211+] */
+
+#define AR5K_ISR_BITS_FROM_SISRS (AR5K_ISR_TXOK | AR5K_ISR_TXDESC |\
+ AR5K_ISR_TXERR | AR5K_ISR_TXEOL |\
+ AR5K_ISR_TXURN | AR5K_ISR_HIUERR |\
+ AR5K_ISR_BCNMISC | AR5K_ISR_QCBRORN |\
+ AR5K_ISR_QCBRURN | AR5K_ISR_QTRIG)
+
+/*
+ * Secondary status registers [5211+] (0 - 4)
+ *
+ * These give the status for each QCU, only QCUs 0-9 are
+ * represented.
+ */
+#define AR5K_SISR0 0x0084 /* Register Address [5211+] */
+#define AR5K_SISR0_QCU_TXOK 0x000003ff /* Mask for QCU_TXOK */
+#define AR5K_SISR0_QCU_TXOK_S 0
+#define AR5K_SISR0_QCU_TXDESC 0x03ff0000 /* Mask for QCU_TXDESC */
+#define AR5K_SISR0_QCU_TXDESC_S 16
+
+#define AR5K_SISR1 0x0088 /* Register Address [5211+] */
+#define AR5K_SISR1_QCU_TXERR 0x000003ff /* Mask for QCU_TXERR */
+#define AR5K_SISR1_QCU_TXERR_S 0
+#define AR5K_SISR1_QCU_TXEOL 0x03ff0000 /* Mask for QCU_TXEOL */
+#define AR5K_SISR1_QCU_TXEOL_S 16
+
+#define AR5K_SISR2 0x008c /* Register Address [5211+] */
+#define AR5K_SISR2_QCU_TXURN 0x000003ff /* Mask for QCU_TXURN */
+#define AR5K_SISR2_QCU_TXURN_S 0
+#define AR5K_SISR2_MCABT 0x00010000 /* Master Cycle Abort */
+#define AR5K_SISR2_SSERR 0x00020000 /* Signaled System Error */
+#define AR5K_SISR2_DPERR 0x00040000 /* Bus parity error */
+#define AR5K_SISR2_TIM 0x01000000 /* [5212+] */
+#define AR5K_SISR2_CAB_END 0x02000000 /* [5212+] */
+#define AR5K_SISR2_DTIM_SYNC 0x04000000 /* DTIM sync lost [5212+] */
+#define AR5K_SISR2_BCN_TIMEOUT 0x08000000 /* Beacon Timeout [5212+] */
+#define AR5K_SISR2_CAB_TIMEOUT 0x10000000 /* CAB Timeout [5212+] */
+#define AR5K_SISR2_DTIM 0x20000000 /* [5212+] */
+#define AR5K_SISR2_TSFOOR 0x80000000 /* TSF Out of range */
+
+#define AR5K_SISR3 0x0090 /* Register Address [5211+] */
+#define AR5K_SISR3_QCBRORN 0x000003ff /* Mask for QCBRORN */
+#define AR5K_SISR3_QCBRORN_S 0
+#define AR5K_SISR3_QCBRURN 0x03ff0000 /* Mask for QCBRURN */
+#define AR5K_SISR3_QCBRURN_S 16
+
+#define AR5K_SISR4 0x0094 /* Register Address [5211+] */
+#define AR5K_SISR4_QTRIG 0x000003ff /* Mask for QTRIG */
+#define AR5K_SISR4_QTRIG_S 0
+
+/*
+ * Shadow read-and-clear interrupt status registers [5211+]
+ */
+#define AR5K_RAC_PISR 0x00c0 /* Read and clear PISR */
+#define AR5K_RAC_SISR0 0x00c4 /* Read and clear SISR0 */
+#define AR5K_RAC_SISR1 0x00c8 /* Read and clear SISR1 */
+#define AR5K_RAC_SISR2 0x00cc /* Read and clear SISR2 */
+#define AR5K_RAC_SISR3 0x00d0 /* Read and clear SISR3 */
+#define AR5K_RAC_SISR4 0x00d4 /* Read and clear SISR4 */
+
+/*
+ * Interrupt Mask Registers
+ *
+ * As with ISRs 5210 has one IMR (AR5K_IMR) and 5211/5212 has one primary
+ * (AR5K_PIMR) and 4 secondary IMRs (AR5K_SIMRx). Note that ISR/IMR flags match.
+ */
+#define AR5K_IMR 0x0020 /* Register Address [5210] */
+#define AR5K_PIMR 0x00a0 /* Register Address [5211+] */
+#define AR5K_IMR_RXOK 0x00000001 /* Frame successfully received*/
+#define AR5K_IMR_RXDESC 0x00000002 /* RX descriptor request*/
+#define AR5K_IMR_RXERR 0x00000004 /* Receive error*/
+#define AR5K_IMR_RXNOFRM 0x00000008 /* No frame received (receive timeout)*/
+#define AR5K_IMR_RXEOL 0x00000010 /* Empty RX descriptor*/
+#define AR5K_IMR_RXORN 0x00000020 /* Receive FIFO overrun*/
+#define AR5K_IMR_TXOK 0x00000040 /* Frame successfully transmitted*/
+#define AR5K_IMR_TXDESC 0x00000080 /* TX descriptor request*/
+#define AR5K_IMR_TXERR 0x00000100 /* Transmit error*/
+#define AR5K_IMR_TXNOFRM 0x00000200 /* No frame transmitted (transmit timeout)*/
+#define AR5K_IMR_TXEOL 0x00000400 /* Empty TX descriptor*/
+#define AR5K_IMR_TXURN 0x00000800 /* Transmit FIFO underrun*/
+#define AR5K_IMR_MIB 0x00001000 /* Update MIB counters*/
+#define AR5K_IMR_SWI 0x00002000 /* Software interrupt */
+#define AR5K_IMR_RXPHY 0x00004000 /* PHY error*/
+#define AR5K_IMR_RXKCM 0x00008000 /* RX Key cache miss */
+#define AR5K_IMR_SWBA 0x00010000 /* Software beacon alert*/
+#define AR5K_IMR_BRSSI 0x00020000 /* Beacon rssi below threshold (?) */
+#define AR5K_IMR_BMISS 0x00040000 /* Beacon missed*/
+#define AR5K_IMR_HIUERR 0x00080000 /* Host Interface Unit error [5211+] */
+#define AR5K_IMR_BNR 0x00100000 /* Beacon not ready [5211+] */
+#define AR5K_IMR_MCABT 0x00100000 /* Master Cycle Abort [5210] */
+#define AR5K_IMR_RXCHIRP 0x00200000 /* CHIRP Received [5212+]*/
+#define AR5K_IMR_SSERR 0x00200000 /* Signaled System Error [5210] */
+#define AR5K_IMR_DPERR 0x00400000 /* Det par Error (?) [5210] */
+#define AR5K_IMR_RXDOPPLER 0x00400000 /* Doppler chirp received [5212+] */
+#define AR5K_IMR_TIM 0x00800000 /* [5211+] */
+#define AR5K_IMR_BCNMISC 0x00800000 /* 'or' of TIM, CAB_END, DTIM_SYNC, BCN_TIMEOUT,
+ CAB_TIMEOUT and DTIM bits from SISR2 [5212+] */
+#define AR5K_IMR_GPIO 0x01000000 /* GPIO (rf kill)*/
+#define AR5K_IMR_QCBRORN 0x02000000 /* QCU CBR overrun (?) [5211+] */
+#define AR5K_IMR_QCBRURN 0x04000000 /* QCU CBR underrun (?) [5211+] */
+#define AR5K_IMR_QTRIG 0x08000000 /* QCU scheduling trigger [5211+] */
+
+/*
+ * Secondary interrupt mask registers [5211+] (0 - 4)
+ */
+#define AR5K_SIMR0 0x00a4 /* Register Address [5211+] */
+#define AR5K_SIMR0_QCU_TXOK 0x000003ff /* Mask for QCU_TXOK */
+#define AR5K_SIMR0_QCU_TXOK_S 0
+#define AR5K_SIMR0_QCU_TXDESC 0x03ff0000 /* Mask for QCU_TXDESC */
+#define AR5K_SIMR0_QCU_TXDESC_S 16
+
+#define AR5K_SIMR1 0x00a8 /* Register Address [5211+] */
+#define AR5K_SIMR1_QCU_TXERR 0x000003ff /* Mask for QCU_TXERR */
+#define AR5K_SIMR1_QCU_TXERR_S 0
+#define AR5K_SIMR1_QCU_TXEOL 0x03ff0000 /* Mask for QCU_TXEOL */
+#define AR5K_SIMR1_QCU_TXEOL_S 16
+
+#define AR5K_SIMR2 0x00ac /* Register Address [5211+] */
+#define AR5K_SIMR2_QCU_TXURN 0x000003ff /* Mask for QCU_TXURN */
+#define AR5K_SIMR2_QCU_TXURN_S 0
+#define AR5K_SIMR2_MCABT 0x00010000 /* Master Cycle Abort */
+#define AR5K_SIMR2_SSERR 0x00020000 /* Signaled System Error */
+#define AR5K_SIMR2_DPERR 0x00040000 /* Bus parity error */
+#define AR5K_SIMR2_TIM 0x01000000 /* [5212+] */
+#define AR5K_SIMR2_CAB_END 0x02000000 /* [5212+] */
+#define AR5K_SIMR2_DTIM_SYNC 0x04000000 /* DTIM Sync lost [5212+] */
+#define AR5K_SIMR2_BCN_TIMEOUT 0x08000000 /* Beacon Timeout [5212+] */
+#define AR5K_SIMR2_CAB_TIMEOUT 0x10000000 /* CAB Timeout [5212+] */
+#define AR5K_SIMR2_DTIM 0x20000000 /* [5212+] */
+#define AR5K_SIMR2_TSFOOR 0x80000000 /* TSF OOR (?) */
+
+#define AR5K_SIMR3 0x00b0 /* Register Address [5211+] */
+#define AR5K_SIMR3_QCBRORN 0x000003ff /* Mask for QCBRORN */
+#define AR5K_SIMR3_QCBRORN_S 0
+#define AR5K_SIMR3_QCBRURN 0x03ff0000 /* Mask for QCBRURN */
+#define AR5K_SIMR3_QCBRURN_S 16
+
+#define AR5K_SIMR4 0x00b4 /* Register Address [5211+] */
+#define AR5K_SIMR4_QTRIG 0x000003ff /* Mask for QTRIG */
+#define AR5K_SIMR4_QTRIG_S 0
+
+/*
+ * DMA Debug registers 0-7
+ * 0xe0 - 0xfc
+ */
+
+/*
+ * Decompression mask registers [5212+]
+ */
+#define AR5K_DCM_ADDR 0x0400 /*Decompression mask address (index) */
+#define AR5K_DCM_DATA 0x0404 /*Decompression mask data */
+
+/*
+ * Wake On Wireless pattern control register [5212+]
+ */
+#define AR5K_WOW_PCFG 0x0410 /* Register Address */
+#define AR5K_WOW_PCFG_PAT_MATCH_EN 0x00000001 /* Pattern match enable */
+#define AR5K_WOW_PCFG_LONG_FRAME_POL 0x00000002 /* Long frame policy */
+#define AR5K_WOW_PCFG_WOBMISS 0x00000004 /* Wake on bea(con) miss (?) */
+#define AR5K_WOW_PCFG_PAT_0_EN 0x00000100 /* Enable pattern 0 */
+#define AR5K_WOW_PCFG_PAT_1_EN 0x00000200 /* Enable pattern 1 */
+#define AR5K_WOW_PCFG_PAT_2_EN 0x00000400 /* Enable pattern 2 */
+#define AR5K_WOW_PCFG_PAT_3_EN 0x00000800 /* Enable pattern 3 */
+#define AR5K_WOW_PCFG_PAT_4_EN 0x00001000 /* Enable pattern 4 */
+#define AR5K_WOW_PCFG_PAT_5_EN 0x00002000 /* Enable pattern 5 */
+
+/*
+ * Wake On Wireless pattern index register (?) [5212+]
+ */
+#define AR5K_WOW_PAT_IDX 0x0414
+
+/*
+ * Wake On Wireless pattern data register [5212+]
+ */
+#define AR5K_WOW_PAT_DATA 0x0418 /* Register Address */
+#define AR5K_WOW_PAT_DATA_0_3_V 0x00000001 /* Pattern 0, 3 value */
+#define AR5K_WOW_PAT_DATA_1_4_V 0x00000100 /* Pattern 1, 4 value */
+#define AR5K_WOW_PAT_DATA_2_5_V 0x00010000 /* Pattern 2, 5 value */
+#define AR5K_WOW_PAT_DATA_0_3_M 0x01000000 /* Pattern 0, 3 mask */
+#define AR5K_WOW_PAT_DATA_1_4_M 0x04000000 /* Pattern 1, 4 mask */
+#define AR5K_WOW_PAT_DATA_2_5_M 0x10000000 /* Pattern 2, 5 mask */
+
+/*
+ * Decompression configuration registers [5212+]
+ */
+#define AR5K_DCCFG 0x0420 /* Register Address */
+#define AR5K_DCCFG_GLOBAL_EN 0x00000001 /* Enable decompression on all queues */
+#define AR5K_DCCFG_BYPASS_EN 0x00000002 /* Bypass decompression */
+#define AR5K_DCCFG_BCAST_EN 0x00000004 /* Enable decompression for bcast frames */
+#define AR5K_DCCFG_MCAST_EN 0x00000008 /* Enable decompression for mcast frames */
+
+/*
+ * Compression configuration registers [5212+]
+ */
+#define AR5K_CCFG 0x0600 /* Register Address */
+#define AR5K_CCFG_WINDOW_SIZE 0x00000007 /* Compression window size */
+#define AR5K_CCFG_CPC_EN 0x00000008 /* Enable performance counters */
+
+#define AR5K_CCFG_CCU 0x0604 /* Register Address */
+#define AR5K_CCFG_CCU_CUP_EN 0x00000001 /* CCU Catchup enable */
+#define AR5K_CCFG_CCU_CREDIT 0x00000002 /* CCU Credit (field) */
+#define AR5K_CCFG_CCU_CD_THRES 0x00000080 /* CCU Cyc(lic?) debt threshold (field) */
+#define AR5K_CCFG_CCU_CUP_LCNT 0x00010000 /* CCU Catchup lit(?) count */
+#define AR5K_CCFG_CCU_INIT 0x00100200 /* Initial value during reset */
+
+/*
+ * Compression performance counter registers [5212+]
+ */
+#define AR5K_CPC0 0x0610 /* Compression performance counter 0 */
+#define AR5K_CPC1 0x0614 /* Compression performance counter 1*/
+#define AR5K_CPC2 0x0618 /* Compression performance counter 2 */
+#define AR5K_CPC3 0x061c /* Compression performance counter 3 */
+#define AR5K_CPCOVF 0x0620 /* Compression performance overflow */
+
+
+/*
+ * Queue control unit (QCU) registers [5211+]
+ *
+ * Card has 12 TX Queues but i see that only 0-9 are used (?)
+ * both in binary HAL (see ah.h) and ar5k. Each queue has it's own
+ * TXDP at addresses 0x0800 - 0x082c, a CBR (Constant Bit Rate)
+ * configuration register (0x08c0 - 0x08ec), a ready time configuration
+ * register (0x0900 - 0x092c), a misc configuration register (0x09c0 -
+ * 0x09ec) and a status register (0x0a00 - 0x0a2c). We also have some
+ * global registers, QCU transmit enable/disable and "one shot arm (?)"
+ * set/clear, which contain status for all queues (we shift by 1 for each
+ * queue). To access these registers easily we define some macros here
+ * that are used inside HAL. For more infos check out *_tx_queue functs.
+ */
+
+/*
+ * Generic QCU Register access macros
+ */
+#define AR5K_QUEUE_REG(_r, _q) (((_q) << 2) + _r)
+#define AR5K_QCU_GLOBAL_READ(_r, _q) (AR5K_REG_READ(_r) & (1 << _q))
+#define AR5K_QCU_GLOBAL_WRITE(_r, _q) AR5K_REG_WRITE(_r, (1 << _q))
+
+/*
+ * QCU Transmit descriptor pointer registers
+ */
+#define AR5K_QCU_TXDP_BASE 0x0800 /* Register Address - Queue0 TXDP */
+#define AR5K_QUEUE_TXDP(_q) AR5K_QUEUE_REG(AR5K_QCU_TXDP_BASE, _q)
+
+/*
+ * QCU Transmit enable register
+ */
+#define AR5K_QCU_TXE 0x0840
+#define AR5K_ENABLE_QUEUE(_q) AR5K_QCU_GLOBAL_WRITE(AR5K_QCU_TXE, _q)
+#define AR5K_QUEUE_ENABLED(_q) AR5K_QCU_GLOBAL_READ(AR5K_QCU_TXE, _q)
+
+/*
+ * QCU Transmit disable register
+ */
+#define AR5K_QCU_TXD 0x0880
+#define AR5K_DISABLE_QUEUE(_q) AR5K_QCU_GLOBAL_WRITE(AR5K_QCU_TXD, _q)
+#define AR5K_QUEUE_DISABLED(_q) AR5K_QCU_GLOBAL_READ(AR5K_QCU_TXD, _q)
+
+/*
+ * QCU Constant Bit Rate configuration registers
+ */
+#define AR5K_QCU_CBRCFG_BASE 0x08c0 /* Register Address - Queue0 CBRCFG */
+#define AR5K_QCU_CBRCFG_INTVAL 0x00ffffff /* CBR Interval mask */
+#define AR5K_QCU_CBRCFG_INTVAL_S 0
+#define AR5K_QCU_CBRCFG_ORN_THRES 0xff000000 /* CBR overrun threshold mask */
+#define AR5K_QCU_CBRCFG_ORN_THRES_S 24
+#define AR5K_QUEUE_CBRCFG(_q) AR5K_QUEUE_REG(AR5K_QCU_CBRCFG_BASE, _q)
+
+/*
+ * QCU Ready time configuration registers
+ */
+#define AR5K_QCU_RDYTIMECFG_BASE 0x0900 /* Register Address - Queue0 RDYTIMECFG */
+#define AR5K_QCU_RDYTIMECFG_INTVAL 0x00ffffff /* Ready time interval mask */
+#define AR5K_QCU_RDYTIMECFG_INTVAL_S 0
+#define AR5K_QCU_RDYTIMECFG_ENABLE 0x01000000 /* Ready time enable mask */
+#define AR5K_QUEUE_RDYTIMECFG(_q) AR5K_QUEUE_REG(AR5K_QCU_RDYTIMECFG_BASE, _q)
+
+/*
+ * QCU one shot arm set registers
+ */
+#define AR5K_QCU_ONESHOTARM_SET 0x0940 /* Register Address -QCU "one shot arm set (?)" */
+#define AR5K_QCU_ONESHOTARM_SET_M 0x0000ffff
+
+/*
+ * QCU one shot arm clear registers
+ */
+#define AR5K_QCU_ONESHOTARM_CLEAR 0x0980 /* Register Address -QCU "one shot arm clear (?)" */
+#define AR5K_QCU_ONESHOTARM_CLEAR_M 0x0000ffff
+
+/*
+ * QCU misc registers
+ */
+#define AR5K_QCU_MISC_BASE 0x09c0 /* Register Address -Queue0 MISC */
+#define AR5K_QCU_MISC_FRSHED_M 0x0000000f /* Frame scheduling mask */
+#define AR5K_QCU_MISC_FRSHED_ASAP 0 /* ASAP */
+#define AR5K_QCU_MISC_FRSHED_CBR 1 /* Constant Bit Rate */
+#define AR5K_QCU_MISC_FRSHED_DBA_GT 2 /* DMA Beacon alert gated */
+#define AR5K_QCU_MISC_FRSHED_TIM_GT 3 /* TIMT gated */
+#define AR5K_QCU_MISC_FRSHED_BCN_SENT_GT 4 /* Beacon sent gated */
+#define AR5K_QCU_MISC_ONESHOT_ENABLE 0x00000010 /* Oneshot enable */
+#define AR5K_QCU_MISC_CBREXP_DIS 0x00000020 /* Disable CBR expired counter (normal queue) */
+#define AR5K_QCU_MISC_CBREXP_BCN_DIS 0x00000040 /* Disable CBR expired counter (beacon queue) */
+#define AR5K_QCU_MISC_BCN_ENABLE 0x00000080 /* Enable Beacon use */
+#define AR5K_QCU_MISC_CBR_THRES_ENABLE 0x00000100 /* CBR expired threshold enabled */
+#define AR5K_QCU_MISC_RDY_VEOL_POLICY 0x00000200 /* TXE reset when RDYTIME expired or VEOL */
+#define AR5K_QCU_MISC_CBR_RESET_CNT 0x00000400 /* CBR threshold (counter) reset */
+#define AR5K_QCU_MISC_DCU_EARLY 0x00000800 /* DCU early termination */
+#define AR5K_QCU_MISC_DCU_CMP_EN 0x00001000 /* Enable frame compression */
+#define AR5K_QUEUE_MISC(_q) AR5K_QUEUE_REG(AR5K_QCU_MISC_BASE, _q)
+
+
+/*
+ * QCU status registers
+ */
+#define AR5K_QCU_STS_BASE 0x0a00 /* Register Address - Queue0 STS */
+#define AR5K_QCU_STS_FRMPENDCNT 0x00000003 /* Frames pending counter */
+#define AR5K_QCU_STS_CBREXPCNT 0x0000ff00 /* CBR expired counter */
+#define AR5K_QUEUE_STATUS(_q) AR5K_QUEUE_REG(AR5K_QCU_STS_BASE, _q)
+
+/*
+ * QCU ready time shutdown register
+ */
+#define AR5K_QCU_RDYTIMESHDN 0x0a40
+#define AR5K_QCU_RDYTIMESHDN_M 0x000003ff
+
+/*
+ * QCU compression buffer base registers [5212+]
+ */
+#define AR5K_QCU_CBB_SELECT 0x0b00
+#define AR5K_QCU_CBB_ADDR 0x0b04
+#define AR5K_QCU_CBB_ADDR_S 9
+
+/*
+ * QCU compression buffer configuration register [5212+]
+ * (buffer size)
+ */
+#define AR5K_QCU_CBCFG 0x0b08
+
+
+
+/*
+ * Distributed Coordination Function (DCF) control unit (DCU)
+ * registers [5211+]
+ *
+ * These registers control the various characteristics of each queue
+ * for 802.11e (WME) compatibility so they go together with
+ * QCU registers in pairs. For each queue we have a QCU mask register,
+ * (0x1000 - 0x102c), a local-IFS settings register (0x1040 - 0x106c),
+ * a retry limit register (0x1080 - 0x10ac), a channel time register
+ * (0x10c0 - 0x10ec), a misc-settings register (0x1100 - 0x112c) and
+ * a sequence number register (0x1140 - 0x116c). It seems that "global"
+ * registers here affect all queues (see use of DCU_GBL_IFS_SLOT in ar5k).
+ * We use the same macros here for easier register access.
+ *
+ */
+
+/*
+ * DCU QCU mask registers
+ */
+#define AR5K_DCU_QCUMASK_BASE 0x1000 /* Register Address -Queue0 DCU_QCUMASK */
+#define AR5K_DCU_QCUMASK_M 0x000003ff
+#define AR5K_QUEUE_QCUMASK(_q) AR5K_QUEUE_REG(AR5K_DCU_QCUMASK_BASE, _q)
+
+/*
+ * DCU local Inter Frame Space settings register
+ */
+#define AR5K_DCU_LCL_IFS_BASE 0x1040 /* Register Address -Queue0 DCU_LCL_IFS */
+#define AR5K_DCU_LCL_IFS_CW_MIN 0x000003ff /* Minimum Contention Window */
+#define AR5K_DCU_LCL_IFS_CW_MIN_S 0
+#define AR5K_DCU_LCL_IFS_CW_MAX 0x000ffc00 /* Maximum Contention Window */
+#define AR5K_DCU_LCL_IFS_CW_MAX_S 10
+#define AR5K_DCU_LCL_IFS_AIFS 0x0ff00000 /* Arbitrated Interframe Space */
+#define AR5K_DCU_LCL_IFS_AIFS_S 20
+#define AR5K_DCU_LCL_IFS_AIFS_MAX 0xfc /* Anything above that can cause DCU to hang */
+#define AR5K_QUEUE_DFS_LOCAL_IFS(_q) AR5K_QUEUE_REG(AR5K_DCU_LCL_IFS_BASE, _q)
+
+/*
+ * DCU retry limit registers
+ * all these fields don't allow zero values
+ */
+#define AR5K_DCU_RETRY_LMT_BASE 0x1080 /* Register Address -Queue0 DCU_RETRY_LMT */
+#define AR5K_DCU_RETRY_LMT_RTS 0x0000000f /* RTS failure limit. Transmission fails if no CTS is received for this number of times */
+#define AR5K_DCU_RETRY_LMT_RTS_S 0
+#define AR5K_DCU_RETRY_LMT_STA_RTS 0x00003f00 /* STA RTS failure limit. If exceeded CW reset */
+#define AR5K_DCU_RETRY_LMT_STA_RTS_S 8
+#define AR5K_DCU_RETRY_LMT_STA_DATA 0x000fc000 /* STA data failure limit. If exceeded CW reset. */
+#define AR5K_DCU_RETRY_LMT_STA_DATA_S 14
+#define AR5K_QUEUE_DFS_RETRY_LIMIT(_q) AR5K_QUEUE_REG(AR5K_DCU_RETRY_LMT_BASE, _q)
+
+/*
+ * DCU channel time registers
+ */
+#define AR5K_DCU_CHAN_TIME_BASE 0x10c0 /* Register Address -Queue0 DCU_CHAN_TIME */
+#define AR5K_DCU_CHAN_TIME_DUR 0x000fffff /* Channel time duration */
+#define AR5K_DCU_CHAN_TIME_DUR_S 0
+#define AR5K_DCU_CHAN_TIME_ENABLE 0x00100000 /* Enable channel time */
+#define AR5K_QUEUE_DFS_CHANNEL_TIME(_q) AR5K_QUEUE_REG(AR5K_DCU_CHAN_TIME_BASE, _q)
+
+/*
+ * DCU misc registers [5211+]
+ *
+ * Note: Arbiter lockout control controls the
+ * behaviour on low priority queues when we have multiple queues
+ * with pending frames. Intra-frame lockout means we wait until
+ * the queue's current frame transmits (with post frame backoff and bursting)
+ * before we transmit anything else and global lockout means we
+ * wait for the whole queue to finish before higher priority queues
+ * can transmit (this is used on beacon and CAB queues).
+ * No lockout means there is no special handling.
+ */
+#define AR5K_DCU_MISC_BASE 0x1100 /* Register Address -Queue0 DCU_MISC */
+#define AR5K_DCU_MISC_BACKOFF 0x0000003f /* Mask for backoff threshold */
+#define AR5K_DCU_MISC_ETS_RTS_POL 0x00000040 /* End of transmission series
+ station RTS/data failure count
+ reset policy (?) */
+#define AR5K_DCU_MISC_ETS_CW_POL 0x00000080 /* End of transmission series
+ CW reset policy */
+#define AR5K_DCU_MISC_FRAG_WAIT 0x00000100 /* Wait for next fragment */
+#define AR5K_DCU_MISC_BACKOFF_FRAG 0x00000200 /* Enable backoff while bursting */
+#define AR5K_DCU_MISC_HCFPOLL_ENABLE 0x00000800 /* CF - Poll enable */
+#define AR5K_DCU_MISC_BACKOFF_PERSIST 0x00001000 /* Persistent backoff */
+#define AR5K_DCU_MISC_FRMPRFTCH_ENABLE 0x00002000 /* Enable frame pre-fetch */
+#define AR5K_DCU_MISC_VIRTCOL 0x0000c000 /* Mask for Virtual Collision (?) */
+#define AR5K_DCU_MISC_VIRTCOL_NORMAL 0
+#define AR5K_DCU_MISC_VIRTCOL_IGNORE 1
+#define AR5K_DCU_MISC_BCN_ENABLE 0x00010000 /* Enable Beacon use */
+#define AR5K_DCU_MISC_ARBLOCK_CTL 0x00060000 /* Arbiter lockout control mask */
+#define AR5K_DCU_MISC_ARBLOCK_CTL_S 17
+#define AR5K_DCU_MISC_ARBLOCK_CTL_NONE 0 /* No arbiter lockout */
+#define AR5K_DCU_MISC_ARBLOCK_CTL_INTFRM 1 /* Intra-frame lockout */
+#define AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL 2 /* Global lockout */
+#define AR5K_DCU_MISC_ARBLOCK_IGNORE 0x00080000 /* Ignore Arbiter lockout */
+#define AR5K_DCU_MISC_SEQ_NUM_INCR_DIS 0x00100000 /* Disable sequence number increment */
+#define AR5K_DCU_MISC_POST_FR_BKOFF_DIS 0x00200000 /* Disable post-frame backoff */
+#define AR5K_DCU_MISC_VIRT_COLL_POLICY 0x00400000 /* Virtual Collision cw policy */
+#define AR5K_DCU_MISC_BLOWN_IFS_POLICY 0x00800000 /* Blown IFS policy (?) */
+#define AR5K_DCU_MISC_SEQNUM_CTL 0x01000000 /* Sequence number control (?) */
+#define AR5K_QUEUE_DFS_MISC(_q) AR5K_QUEUE_REG(AR5K_DCU_MISC_BASE, _q)
+
+/*
+ * DCU frame sequence number registers
+ */
+#define AR5K_DCU_SEQNUM_BASE 0x1140
+#define AR5K_DCU_SEQNUM_M 0x00000fff
+#define AR5K_QUEUE_DCU_SEQNUM(_q) AR5K_QUEUE_REG(AR5K_DCU_SEQNUM_BASE, _q)
+
+/*
+ * DCU global IFS SIFS register
+ */
+#define AR5K_DCU_GBL_IFS_SIFS 0x1030
+#define AR5K_DCU_GBL_IFS_SIFS_M 0x0000ffff
+
+/*
+ * DCU global IFS slot interval register
+ */
+#define AR5K_DCU_GBL_IFS_SLOT 0x1070
+#define AR5K_DCU_GBL_IFS_SLOT_M 0x0000ffff
+
+/*
+ * DCU global IFS EIFS register
+ */
+#define AR5K_DCU_GBL_IFS_EIFS 0x10b0
+#define AR5K_DCU_GBL_IFS_EIFS_M 0x0000ffff
+
+/*
+ * DCU global IFS misc register
+ *
+ * LFSR stands for Linear Feedback Shift Register
+ * and it's used for generating pseudo-random
+ * number sequences.
+ *
+ * (If i understand correctly, random numbers are
+ * used for idle sensing -multiplied with cwmin/max etc-)
+ */
+#define AR5K_DCU_GBL_IFS_MISC 0x10f0 /* Register Address */
+#define AR5K_DCU_GBL_IFS_MISC_LFSR_SLICE 0x00000007 /* LFSR Slice Select */
+#define AR5K_DCU_GBL_IFS_MISC_TURBO_MODE 0x00000008 /* Turbo mode */
+#define AR5K_DCU_GBL_IFS_MISC_SIFS_DUR_USEC 0x000003f0 /* SIFS Duration mask */
+#define AR5K_DCU_GBL_IFS_MISC_SIFS_DUR_USEC_S 4
+#define AR5K_DCU_GBL_IFS_MISC_USEC_DUR 0x000ffc00 /* USEC Duration mask */
+#define AR5K_DCU_GBL_IFS_MISC_USEC_DUR_S 10
+#define AR5K_DCU_GBL_IFS_MISC_DCU_ARB_DELAY 0x00300000 /* DCU Arbiter delay mask */
+#define AR5K_DCU_GBL_IFS_MISC_SIFS_CNT_RST 0x00400000 /* SIFS cnt reset policy (?) */
+#define AR5K_DCU_GBL_IFS_MISC_AIFS_CNT_RST 0x00800000 /* AIFS cnt reset policy (?) */
+#define AR5K_DCU_GBL_IFS_MISC_RND_LFSR_SL_DIS 0x01000000 /* Disable random LFSR slice */
+
+/*
+ * DCU frame prefetch control register
+ */
+#define AR5K_DCU_FP 0x1230 /* Register Address */
+#define AR5K_DCU_FP_NOBURST_DCU_EN 0x00000001 /* Enable non-burst prefetch on DCU (?) */
+#define AR5K_DCU_FP_NOBURST_EN 0x00000010 /* Enable non-burst prefetch (?) */
+#define AR5K_DCU_FP_BURST_DCU_EN 0x00000020 /* Enable burst prefetch on DCU (?) */
+
+/*
+ * DCU transmit pause control/status register
+ */
+#define AR5K_DCU_TXP 0x1270 /* Register Address */
+#define AR5K_DCU_TXP_M 0x000003ff /* Tx pause mask */
+#define AR5K_DCU_TXP_STATUS 0x00010000 /* Tx pause status */
+
+/*
+ * DCU transmit filter table 0 (32 entries)
+ * each entry contains a 32bit slice of the
+ * 128bit tx filter for each DCU (4 slices per DCU)
+ */
+#define AR5K_DCU_TX_FILTER_0_BASE 0x1038
+#define AR5K_DCU_TX_FILTER_0(_n) (AR5K_DCU_TX_FILTER_0_BASE + (_n * 64))
+
+/*
+ * DCU transmit filter table 1 (16 entries)
+ */
+#define AR5K_DCU_TX_FILTER_1_BASE 0x103c
+#define AR5K_DCU_TX_FILTER_1(_n) (AR5K_DCU_TX_FILTER_1_BASE + (_n * 64))
+
+/*
+ * DCU clear transmit filter register
+ */
+#define AR5K_DCU_TX_FILTER_CLR 0x143c
+
+/*
+ * DCU set transmit filter register
+ */
+#define AR5K_DCU_TX_FILTER_SET 0x147c
+
+/*
+ * Reset control register
+ */
+#define AR5K_RESET_CTL 0x4000 /* Register Address */
+#define AR5K_RESET_CTL_PCU 0x00000001 /* Protocol Control Unit reset */
+#define AR5K_RESET_CTL_DMA 0x00000002 /* DMA (Rx/Tx) reset [5210] */
+#define AR5K_RESET_CTL_BASEBAND 0x00000002 /* Baseband reset [5211+] */
+#define AR5K_RESET_CTL_MAC 0x00000004 /* MAC reset (PCU+Baseband ?) [5210] */
+#define AR5K_RESET_CTL_PHY 0x00000008 /* PHY reset [5210] */
+#define AR5K_RESET_CTL_PCI 0x00000010 /* PCI Core reset (interrupts etc) */
+
+/*
+ * Sleep control register
+ */
+#define AR5K_SLEEP_CTL 0x4004 /* Register Address */
+#define AR5K_SLEEP_CTL_SLDUR 0x0000ffff /* Sleep duration mask */
+#define AR5K_SLEEP_CTL_SLDUR_S 0
+#define AR5K_SLEEP_CTL_SLE 0x00030000 /* Sleep enable mask */
+#define AR5K_SLEEP_CTL_SLE_S 16
+#define AR5K_SLEEP_CTL_SLE_WAKE 0x00000000 /* Force chip awake */
+#define AR5K_SLEEP_CTL_SLE_SLP 0x00010000 /* Force chip sleep */
+#define AR5K_SLEEP_CTL_SLE_ALLOW 0x00020000 /* Normal sleep policy */
+#define AR5K_SLEEP_CTL_SLE_UNITS 0x00000008 /* [5211+] */
+#define AR5K_SLEEP_CTL_DUR_TIM_POL 0x00040000 /* Sleep duration timing policy */
+#define AR5K_SLEEP_CTL_DUR_WRITE_POL 0x00080000 /* Sleep duration write policy */
+#define AR5K_SLEEP_CTL_SLE_POL 0x00100000 /* Sleep policy mode */
+
+/*
+ * Interrupt pending register
+ */
+#define AR5K_INTPEND 0x4008
+#define AR5K_INTPEND_M 0x00000001
+
+/*
+ * Sleep force register
+ */
+#define AR5K_SFR 0x400c
+#define AR5K_SFR_EN 0x00000001
+
+/*
+ * PCI configuration register
+ * TODO: Fix LED stuff
+ */
+#define AR5K_PCICFG 0x4010 /* Register Address */
+#define AR5K_PCICFG_EEAE 0x00000001 /* Eeprom access enable [5210] */
+#define AR5K_PCICFG_SLEEP_CLOCK_EN 0x00000002 /* Enable sleep clock */
+#define AR5K_PCICFG_CLKRUNEN 0x00000004 /* CLKRUN enable [5211+] */
+#define AR5K_PCICFG_EESIZE 0x00000018 /* Mask for EEPROM size [5211+] */
+#define AR5K_PCICFG_EESIZE_S 3
+#define AR5K_PCICFG_EESIZE_4K 0 /* 4K */
+#define AR5K_PCICFG_EESIZE_8K 1 /* 8K */
+#define AR5K_PCICFG_EESIZE_16K 2 /* 16K */
+#define AR5K_PCICFG_EESIZE_FAIL 3 /* Failed to get size [5211+] */
+#define AR5K_PCICFG_LED 0x00000060 /* Led status [5211+] */
+#define AR5K_PCICFG_LED_NONE 0x00000000 /* Default [5211+] */
+#define AR5K_PCICFG_LED_PEND 0x00000020 /* Scan / Auth pending */
+#define AR5K_PCICFG_LED_ASSOC 0x00000040 /* Associated */
+#define AR5K_PCICFG_BUS_SEL 0x00000380 /* Mask for "bus select" [5211+] (?) */
+#define AR5K_PCICFG_CBEFIX_DIS 0x00000400 /* Disable CBE fix */
+#define AR5K_PCICFG_SL_INTEN 0x00000800 /* Enable interrupts when asleep */
+#define AR5K_PCICFG_LED_BCTL 0x00001000 /* Led blink (?) [5210] */
+#define AR5K_PCICFG_RETRY_FIX 0x00001000 /* Enable pci core retry fix */
+#define AR5K_PCICFG_SL_INPEN 0x00002000 /* Sleep even with pending interrupts*/
+#define AR5K_PCICFG_SPWR_DN 0x00010000 /* Mask for power status */
+#define AR5K_PCICFG_LEDMODE 0x000e0000 /* Ledmode [5211+] */
+#define AR5K_PCICFG_LEDMODE_PROP 0x00000000 /* Blink on standard traffic [5211+] */
+#define AR5K_PCICFG_LEDMODE_PROM 0x00020000 /* Default mode (blink on any traffic) [5211+] */
+#define AR5K_PCICFG_LEDMODE_PWR 0x00040000 /* Some other blinking mode (?) [5211+] */
+#define AR5K_PCICFG_LEDMODE_RAND 0x00060000 /* Random blinking (?) [5211+] */
+#define AR5K_PCICFG_LEDBLINK 0x00700000 /* Led blink rate */
+#define AR5K_PCICFG_LEDBLINK_S 20
+#define AR5K_PCICFG_LEDSLOW 0x00800000 /* Slowest led blink rate [5211+] */
+#define AR5K_PCICFG_LEDSTATE \
+ (AR5K_PCICFG_LED | AR5K_PCICFG_LEDMODE | \
+ AR5K_PCICFG_LEDBLINK | AR5K_PCICFG_LEDSLOW)
+#define AR5K_PCICFG_SLEEP_CLOCK_RATE 0x03000000 /* Sleep clock rate */
+#define AR5K_PCICFG_SLEEP_CLOCK_RATE_S 24
+
+/*
+ * "General Purpose Input/Output" (GPIO) control register
+ *
+ * I'm not sure about this but after looking at the code
+ * for all chipsets here is what i got.
+ *
+ * We have 6 GPIOs (pins), each GPIO has 4 modes (2 bits)
+ * Mode 0 -> always input
+ * Mode 1 -> output when GPIODO for this GPIO is set to 0
+ * Mode 2 -> output when GPIODO for this GPIO is set to 1
+ * Mode 3 -> always output
+ *
+ * For more infos check out get_gpio/set_gpio and
+ * set_gpio_input/set_gpio_output functs.
+ * For more infos on gpio interrupt check out set_gpio_intr.
+ */
+#define AR5K_NUM_GPIO 6
+
+#define AR5K_GPIOCR 0x4014 /* Register Address */
+#define AR5K_GPIOCR_INT_ENA 0x00008000 /* Enable GPIO interrupt */
+#define AR5K_GPIOCR_INT_SELL 0x00000000 /* Generate interrupt when pin is low */
+#define AR5K_GPIOCR_INT_SELH 0x00010000 /* Generate interrupt when pin is high */
+#define AR5K_GPIOCR_IN(n) (0 << ((n) * 2)) /* Mode 0 for pin n */
+#define AR5K_GPIOCR_OUT0(n) (1 << ((n) * 2)) /* Mode 1 for pin n */
+#define AR5K_GPIOCR_OUT1(n) (2 << ((n) * 2)) /* Mode 2 for pin n */
+#define AR5K_GPIOCR_OUT(n) (3 << ((n) * 2)) /* Mode 3 for pin n */
+#define AR5K_GPIOCR_INT_SEL(n) ((n) << 12) /* Interrupt for GPIO pin n */
+
+/*
+ * "General Purpose Input/Output" (GPIO) data output register
+ */
+#define AR5K_GPIODO 0x4018
+
+/*
+ * "General Purpose Input/Output" (GPIO) data input register
+ */
+#define AR5K_GPIODI 0x401c
+#define AR5K_GPIODI_M 0x0000002f
+
+/*
+ * Silicon revision register
+ */
+#define AR5K_SREV 0x4020 /* Register Address */
+#define AR5K_SREV_REV 0x0000000f /* Mask for revision */
+#define AR5K_SREV_REV_S 0
+#define AR5K_SREV_VER 0x000000ff /* Mask for version */
+#define AR5K_SREV_VER_S 4
+
+/*
+ * TXE write posting register
+ */
+#define AR5K_TXEPOST 0x4028
+
+/*
+ * QCU sleep mask
+ */
+#define AR5K_QCU_SLEEP_MASK 0x402c
+
+/* 0x4068 is compression buffer configuration
+ * register on 5414 and pm configuration register
+ * on 5424 and newer pci-e chips. */
+
+/*
+ * Compression buffer configuration
+ * register (enable/disable) [5414]
+ */
+#define AR5K_5414_CBCFG 0x4068
+#define AR5K_5414_CBCFG_BUF_DIS 0x10 /* Disable buffer */
+
+/*
+ * PCI-E Power management configuration
+ * and status register [5424+]
+ */
+#define AR5K_PCIE_PM_CTL 0x4068 /* Register address */
+/* Only 5424 */
+#define AR5K_PCIE_PM_CTL_L1_WHEN_D2 0x00000001 /* enable PCIe core enter L1
+ when d2_sleep_en is asserted */
+#define AR5K_PCIE_PM_CTL_L0_L0S_CLEAR 0x00000002 /* Clear L0 and L0S counters */
+#define AR5K_PCIE_PM_CTL_L0_L0S_EN 0x00000004 /* Start L0 nd L0S counters */
+#define AR5K_PCIE_PM_CTL_LDRESET_EN 0x00000008 /* Enable reset when link goes
+ down */
+/* Wake On Wireless */
+#define AR5K_PCIE_PM_CTL_PME_EN 0x00000010 /* PME Enable */
+#define AR5K_PCIE_PM_CTL_AUX_PWR_DET 0x00000020 /* Aux power detect */
+#define AR5K_PCIE_PM_CTL_PME_CLEAR 0x00000040 /* Clear PME */
+#define AR5K_PCIE_PM_CTL_PSM_D0 0x00000080
+#define AR5K_PCIE_PM_CTL_PSM_D1 0x00000100
+#define AR5K_PCIE_PM_CTL_PSM_D2 0x00000200
+#define AR5K_PCIE_PM_CTL_PSM_D3 0x00000400
+
+/*
+ * PCI-E Workaround enable register
+ */
+#define AR5K_PCIE_WAEN 0x407c
+
+/*
+ * PCI-E Serializer/Deserializer
+ * registers
+ */
+#define AR5K_PCIE_SERDES 0x4080
+#define AR5K_PCIE_SERDES_RESET 0x4084
+
+/*====EEPROM REGISTERS====*/
+
+/*
+ * EEPROM access registers
+ *
+ * Here we got a difference between 5210/5211-12
+ * read data register for 5210 is at 0x6800 and
+ * status register is at 0x6c00. There is also
+ * no eeprom command register on 5210 and the
+ * offsets are different.
+ *
+ * To read eeprom data for a specific offset:
+ * 5210 - enable eeprom access (AR5K_PCICFG_EEAE)
+ * read AR5K_EEPROM_BASE +(4 * offset)
+ * check the eeprom status register
+ * and read eeprom data register.
+ *
+ * 5211 - write offset to AR5K_EEPROM_BASE
+ * 5212 write AR5K_EEPROM_CMD_READ on AR5K_EEPROM_CMD
+ * check the eeprom status register
+ * and read eeprom data register.
+ *
+ * To write eeprom data for a specific offset:
+ * 5210 - enable eeprom access (AR5K_PCICFG_EEAE)
+ * write data to AR5K_EEPROM_BASE +(4 * offset)
+ * check the eeprom status register
+ * 5211 - write AR5K_EEPROM_CMD_RESET on AR5K_EEPROM_CMD
+ * 5212 write offset to AR5K_EEPROM_BASE
+ * write data to data register
+ * write AR5K_EEPROM_CMD_WRITE on AR5K_EEPROM_CMD
+ * check the eeprom status register
+ *
+ * For more infos check eeprom_* functs and the ar5k.c
+ * file posted in madwifi-devel mailing list.
+ * http://sourceforge.net/mailarchive/message.php?msg_id=8966525
+ *
+ */
+#define AR5K_EEPROM_BASE 0x6000
+
+/*
+ * EEPROM data register
+ */
+#define AR5K_EEPROM_DATA_5211 0x6004
+#define AR5K_EEPROM_DATA_5210 0x6800
+#define AR5K_EEPROM_DATA (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_EEPROM_DATA_5210 : AR5K_EEPROM_DATA_5211)
+
+/*
+ * EEPROM command register
+ */
+#define AR5K_EEPROM_CMD 0x6008 /* Register Address */
+#define AR5K_EEPROM_CMD_READ 0x00000001 /* EEPROM read */
+#define AR5K_EEPROM_CMD_WRITE 0x00000002 /* EEPROM write */
+#define AR5K_EEPROM_CMD_RESET 0x00000004 /* EEPROM reset */
+
+/*
+ * EEPROM status register
+ */
+#define AR5K_EEPROM_STAT_5210 0x6c00 /* Register Address [5210] */
+#define AR5K_EEPROM_STAT_5211 0x600c /* Register Address [5211+] */
+#define AR5K_EEPROM_STATUS (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_EEPROM_STAT_5210 : AR5K_EEPROM_STAT_5211)
+#define AR5K_EEPROM_STAT_RDERR 0x00000001 /* EEPROM read failed */
+#define AR5K_EEPROM_STAT_RDDONE 0x00000002 /* EEPROM read successful */
+#define AR5K_EEPROM_STAT_WRERR 0x00000004 /* EEPROM write failed */
+#define AR5K_EEPROM_STAT_WRDONE 0x00000008 /* EEPROM write successful */
+
+/*
+ * EEPROM config register
+ */
+#define AR5K_EEPROM_CFG 0x6010 /* Register Address */
+#define AR5K_EEPROM_CFG_SIZE 0x00000003 /* Size determination override */
+#define AR5K_EEPROM_CFG_SIZE_AUTO 0
+#define AR5K_EEPROM_CFG_SIZE_4KBIT 1
+#define AR5K_EEPROM_CFG_SIZE_8KBIT 2
+#define AR5K_EEPROM_CFG_SIZE_16KBIT 3
+#define AR5K_EEPROM_CFG_WR_WAIT_DIS 0x00000004 /* Disable write wait */
+#define AR5K_EEPROM_CFG_CLK_RATE 0x00000018 /* Clock rate */
+#define AR5K_EEPROM_CFG_CLK_RATE_S 3
+#define AR5K_EEPROM_CFG_CLK_RATE_156KHZ 0
+#define AR5K_EEPROM_CFG_CLK_RATE_312KHZ 1
+#define AR5K_EEPROM_CFG_CLK_RATE_625KHZ 2
+#define AR5K_EEPROM_CFG_PROT_KEY 0x00ffff00 /* Protection key */
+#define AR5K_EEPROM_CFG_PROT_KEY_S 8
+#define AR5K_EEPROM_CFG_LIND_EN 0x01000000 /* Enable length indicator (?) */
+
+
+/*
+ * TODO: Wake On Wireless registers
+ * Range 0x7000 - 0x7ce0
+ */
+
+/*
+ * Protocol Control Unit (PCU) registers
+ */
+/*
+ * Used for checking initial register writes
+ * during channel reset (see reset func)
+ */
+#define AR5K_PCU_MIN 0x8000
+#define AR5K_PCU_MAX 0x8fff
+
+/*
+ * First station id register (Lower 32 bits of MAC address)
+ */
+#define AR5K_STA_ID0 0x8000
+#define AR5K_STA_ID0_ARRD_L32 0xffffffff
+
+/*
+ * Second station id register (Upper 16 bits of MAC address + PCU settings)
+ */
+#define AR5K_STA_ID1 0x8004 /* Register Address */
+#define AR5K_STA_ID1_ADDR_U16 0x0000ffff /* Upper 16 bits of MAC address */
+#define AR5K_STA_ID1_AP 0x00010000 /* Set AP mode */
+#define AR5K_STA_ID1_ADHOC 0x00020000 /* Set Ad-Hoc mode */
+#define AR5K_STA_ID1_PWR_SV 0x00040000 /* Power save reporting */
+#define AR5K_STA_ID1_NO_KEYSRCH 0x00080000 /* No key search */
+#define AR5K_STA_ID1_NO_PSPOLL 0x00100000 /* No power save polling [5210] */
+#define AR5K_STA_ID1_PCF_5211 0x00100000 /* Enable PCF on [5211+] */
+#define AR5K_STA_ID1_PCF_5210 0x00200000 /* Enable PCF on [5210]*/
+#define AR5K_STA_ID1_PCF (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_STA_ID1_PCF_5210 : AR5K_STA_ID1_PCF_5211)
+#define AR5K_STA_ID1_DEFAULT_ANTENNA 0x00200000 /* Use default antenna */
+#define AR5K_STA_ID1_DESC_ANTENNA 0x00400000 /* Update antenna from descriptor */
+#define AR5K_STA_ID1_RTS_DEF_ANTENNA 0x00800000 /* Use default antenna for RTS */
+#define AR5K_STA_ID1_ACKCTS_6MB 0x01000000 /* Rate to use for ACK/CTS. 0: highest mandatory rate <= RX rate; 1: 1Mbps in B mode */
+#define AR5K_STA_ID1_BASE_RATE_11B 0x02000000 /* 802.11b base rate. 0: 1, 2, 5.5 and 11Mbps; 1: 1 and 2Mbps. [5211+] */
+#define AR5K_STA_ID1_SELFGEN_DEF_ANT 0x04000000 /* Use def. antenna for self generated frames */
+#define AR5K_STA_ID1_CRYPT_MIC_EN 0x08000000 /* Enable MIC */
+#define AR5K_STA_ID1_KEYSRCH_MODE 0x10000000 /* Look up key when key id != 0 */
+#define AR5K_STA_ID1_PRESERVE_SEQ_NUM 0x20000000 /* Preserve sequence number */
+#define AR5K_STA_ID1_CBCIV_ENDIAN 0x40000000 /* ??? */
+#define AR5K_STA_ID1_KEYSRCH_MCAST 0x80000000 /* Do key cache search for mcast frames */
+
+#define AR5K_STA_ID1_ANTENNA_SETTINGS (AR5K_STA_ID1_DEFAULT_ANTENNA | \
+ AR5K_STA_ID1_DESC_ANTENNA | \
+ AR5K_STA_ID1_RTS_DEF_ANTENNA | \
+ AR5K_STA_ID1_SELFGEN_DEF_ANT)
+
+/*
+ * First BSSID register (MAC address, lower 32bits)
+ */
+#define AR5K_BSS_ID0 0x8008
+
+/*
+ * Second BSSID register (MAC address in upper 16 bits)
+ *
+ * AID: Association ID
+ */
+#define AR5K_BSS_ID1 0x800c
+#define AR5K_BSS_ID1_AID 0xffff0000
+#define AR5K_BSS_ID1_AID_S 16
+
+/*
+ * Backoff slot time register
+ */
+#define AR5K_SLOT_TIME 0x8010
+
+/*
+ * ACK/CTS timeout register
+ */
+#define AR5K_TIME_OUT 0x8014 /* Register Address */
+#define AR5K_TIME_OUT_ACK 0x00001fff /* ACK timeout mask */
+#define AR5K_TIME_OUT_ACK_S 0
+#define AR5K_TIME_OUT_CTS 0x1fff0000 /* CTS timeout mask */
+#define AR5K_TIME_OUT_CTS_S 16
+
+/*
+ * RSSI threshold register
+ */
+#define AR5K_RSSI_THR 0x8018 /* Register Address */
+#define AR5K_RSSI_THR_M 0x000000ff /* Mask for RSSI threshold [5211+] */
+#define AR5K_RSSI_THR_BMISS_5210 0x00000700 /* Mask for Beacon Missed threshold [5210] */
+#define AR5K_RSSI_THR_BMISS_5210_S 8
+#define AR5K_RSSI_THR_BMISS_5211 0x0000ff00 /* Mask for Beacon Missed threshold [5211+] */
+#define AR5K_RSSI_THR_BMISS_5211_S 8
+#define AR5K_RSSI_THR_BMISS (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_RSSI_THR_BMISS_5210 : AR5K_RSSI_THR_BMISS_5211)
+#define AR5K_RSSI_THR_BMISS_S 8
+
+/*
+ * 5210 has more PCU registers because there is no QCU/DCU
+ * so queue parameters are set here, this way a lot common
+ * registers have different address for 5210. To make things
+ * easier we define a macro based on ah->ah_version for common
+ * registers with different addresses and common flags.
+ */
+
+/*
+ * Retry limit register
+ *
+ * Retry limit register for 5210 (no QCU/DCU so it's done in PCU)
+ */
+#define AR5K_NODCU_RETRY_LMT 0x801c /* Register Address */
+#define AR5K_NODCU_RETRY_LMT_SH_RETRY 0x0000000f /* Short retry limit mask */
+#define AR5K_NODCU_RETRY_LMT_SH_RETRY_S 0
+#define AR5K_NODCU_RETRY_LMT_LG_RETRY 0x000000f0 /* Long retry mask */
+#define AR5K_NODCU_RETRY_LMT_LG_RETRY_S 4
+#define AR5K_NODCU_RETRY_LMT_SSH_RETRY 0x00003f00 /* Station short retry limit mask */
+#define AR5K_NODCU_RETRY_LMT_SSH_RETRY_S 8
+#define AR5K_NODCU_RETRY_LMT_SLG_RETRY 0x000fc000 /* Station long retry limit mask */
+#define AR5K_NODCU_RETRY_LMT_SLG_RETRY_S 14
+#define AR5K_NODCU_RETRY_LMT_CW_MIN 0x3ff00000 /* Minimum contention window mask */
+#define AR5K_NODCU_RETRY_LMT_CW_MIN_S 20
+
+/*
+ * Transmit latency register
+ */
+#define AR5K_USEC_5210 0x8020 /* Register Address [5210] */
+#define AR5K_USEC_5211 0x801c /* Register Address [5211+] */
+#define AR5K_USEC (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_USEC_5210 : AR5K_USEC_5211)
+#define AR5K_USEC_1 0x0000007f /* clock cycles for 1us */
+#define AR5K_USEC_1_S 0
+#define AR5K_USEC_32 0x00003f80 /* clock cycles for 1us while on 32MHz clock */
+#define AR5K_USEC_32_S 7
+#define AR5K_USEC_TX_LATENCY_5211 0x007fc000
+#define AR5K_USEC_TX_LATENCY_5211_S 14
+#define AR5K_USEC_RX_LATENCY_5211 0x1f800000
+#define AR5K_USEC_RX_LATENCY_5211_S 23
+#define AR5K_USEC_TX_LATENCY_5210 0x000fc000 /* also for 5311 */
+#define AR5K_USEC_TX_LATENCY_5210_S 14
+#define AR5K_USEC_RX_LATENCY_5210 0x03f00000 /* also for 5311 */
+#define AR5K_USEC_RX_LATENCY_5210_S 20
+
+/*
+ * PCU beacon control register
+ */
+#define AR5K_BEACON_5210 0x8024 /*Register Address [5210] */
+#define AR5K_BEACON_5211 0x8020 /*Register Address [5211+] */
+#define AR5K_BEACON (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_BEACON_5210 : AR5K_BEACON_5211)
+#define AR5K_BEACON_PERIOD 0x0000ffff /* Mask for beacon period */
+#define AR5K_BEACON_PERIOD_S 0
+#define AR5K_BEACON_TIM 0x007f0000 /* Mask for TIM offset */
+#define AR5K_BEACON_TIM_S 16
+#define AR5K_BEACON_ENABLE 0x00800000 /* Enable beacons */
+#define AR5K_BEACON_RESET_TSF 0x01000000 /* Force TSF reset */
+
+/*
+ * CFP period register
+ */
+#define AR5K_CFP_PERIOD_5210 0x8028
+#define AR5K_CFP_PERIOD_5211 0x8024
+#define AR5K_CFP_PERIOD (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_CFP_PERIOD_5210 : AR5K_CFP_PERIOD_5211)
+
+/*
+ * Next beacon time register
+ */
+#define AR5K_TIMER0_5210 0x802c
+#define AR5K_TIMER0_5211 0x8028
+#define AR5K_TIMER0 (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_TIMER0_5210 : AR5K_TIMER0_5211)
+
+/*
+ * Next DMA beacon alert register
+ */
+#define AR5K_TIMER1_5210 0x8030
+#define AR5K_TIMER1_5211 0x802c
+#define AR5K_TIMER1 (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_TIMER1_5210 : AR5K_TIMER1_5211)
+
+/*
+ * Next software beacon alert register
+ */
+#define AR5K_TIMER2_5210 0x8034
+#define AR5K_TIMER2_5211 0x8030
+#define AR5K_TIMER2 (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_TIMER2_5210 : AR5K_TIMER2_5211)
+
+/*
+ * Next ATIM window time register
+ */
+#define AR5K_TIMER3_5210 0x8038
+#define AR5K_TIMER3_5211 0x8034
+#define AR5K_TIMER3 (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_TIMER3_5210 : AR5K_TIMER3_5211)
+
+
+/*
+ * 5210 First inter frame spacing register (IFS)
+ */
+#define AR5K_IFS0 0x8040
+#define AR5K_IFS0_SIFS 0x000007ff
+#define AR5K_IFS0_SIFS_S 0
+#define AR5K_IFS0_DIFS 0x007ff800
+#define AR5K_IFS0_DIFS_S 11
+
+/*
+ * 5210 Second inter frame spacing register (IFS)
+ */
+#define AR5K_IFS1 0x8044
+#define AR5K_IFS1_PIFS 0x00000fff
+#define AR5K_IFS1_PIFS_S 0
+#define AR5K_IFS1_EIFS 0x03fff000
+#define AR5K_IFS1_EIFS_S 12
+#define AR5K_IFS1_CS_EN 0x04000000
+#define AR5K_IFS1_CS_EN_S 26
+
+/*
+ * CFP duration register
+ */
+#define AR5K_CFP_DUR_5210 0x8048
+#define AR5K_CFP_DUR_5211 0x8038
+#define AR5K_CFP_DUR (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_CFP_DUR_5210 : AR5K_CFP_DUR_5211)
+
+/*
+ * Receive filter register
+ */
+#define AR5K_RX_FILTER_5210 0x804c /* Register Address [5210] */
+#define AR5K_RX_FILTER_5211 0x803c /* Register Address [5211+] */
+#define AR5K_RX_FILTER (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_RX_FILTER_5210 : AR5K_RX_FILTER_5211)
+#define AR5K_RX_FILTER_UCAST 0x00000001 /* Don't filter unicast frames */
+#define AR5K_RX_FILTER_MCAST 0x00000002 /* Don't filter multicast frames */
+#define AR5K_RX_FILTER_BCAST 0x00000004 /* Don't filter broadcast frames */
+#define AR5K_RX_FILTER_CONTROL 0x00000008 /* Don't filter control frames */
+#define AR5K_RX_FILTER_BEACON 0x00000010 /* Don't filter beacon frames */
+#define AR5K_RX_FILTER_PROM 0x00000020 /* Set promiscuous mode */
+#define AR5K_RX_FILTER_XRPOLL 0x00000040 /* Don't filter XR poll frame [5212+] */
+#define AR5K_RX_FILTER_PROBEREQ 0x00000080 /* Don't filter probe requests [5212+] */
+#define AR5K_RX_FILTER_PHYERR_5212 0x00000100 /* Don't filter phy errors [5212+] */
+#define AR5K_RX_FILTER_RADARERR_5212 0x00000200 /* Don't filter phy radar errors [5212+] */
+#define AR5K_RX_FILTER_PHYERR_5211 0x00000040 /* [5211] */
+#define AR5K_RX_FILTER_RADARERR_5211 0x00000080 /* [5211] */
+#define AR5K_RX_FILTER_PHYERR \
+ ((ah->ah_version == AR5K_AR5211 ? \
+ AR5K_RX_FILTER_PHYERR_5211 : AR5K_RX_FILTER_PHYERR_5212))
+#define AR5K_RX_FILTER_RADARERR \
+ ((ah->ah_version == AR5K_AR5211 ? \
+ AR5K_RX_FILTER_RADARERR_5211 : AR5K_RX_FILTER_RADARERR_5212))
+
+/*
+ * Multicast filter register (lower 32 bits)
+ */
+#define AR5K_MCAST_FILTER0_5210 0x8050
+#define AR5K_MCAST_FILTER0_5211 0x8040
+#define AR5K_MCAST_FILTER0 (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_MCAST_FILTER0_5210 : AR5K_MCAST_FILTER0_5211)
+
+/*
+ * Multicast filter register (higher 16 bits)
+ */
+#define AR5K_MCAST_FILTER1_5210 0x8054
+#define AR5K_MCAST_FILTER1_5211 0x8044
+#define AR5K_MCAST_FILTER1 (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_MCAST_FILTER1_5210 : AR5K_MCAST_FILTER1_5211)
+
+
+/*
+ * Transmit mask register (lower 32 bits) [5210]
+ */
+#define AR5K_TX_MASK0 0x8058
+
+/*
+ * Transmit mask register (higher 16 bits) [5210]
+ */
+#define AR5K_TX_MASK1 0x805c
+
+/*
+ * Clear transmit mask [5210]
+ */
+#define AR5K_CLR_TMASK 0x8060
+
+/*
+ * Trigger level register (before transmission) [5210]
+ */
+#define AR5K_TRIG_LVL 0x8064
+
+
+/*
+ * PCU Diagnostic register
+ *
+ * Used for tweaking/diagnostics.
+ */
+#define AR5K_DIAG_SW_5210 0x8068 /* Register Address [5210] */
+#define AR5K_DIAG_SW_5211 0x8048 /* Register Address [5211+] */
+#define AR5K_DIAG_SW (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_DIAG_SW_5210 : AR5K_DIAG_SW_5211)
+#define AR5K_DIAG_SW_DIS_WEP_ACK 0x00000001 /* Disable ACKs if WEP key is invalid */
+#define AR5K_DIAG_SW_DIS_ACK 0x00000002 /* Disable ACKs */
+#define AR5K_DIAG_SW_DIS_CTS 0x00000004 /* Disable CTSs */
+#define AR5K_DIAG_SW_DIS_ENC 0x00000008 /* Disable HW encryption */
+#define AR5K_DIAG_SW_DIS_DEC 0x00000010 /* Disable HW decryption */
+#define AR5K_DIAG_SW_DIS_TX_5210 0x00000020 /* Disable transmit [5210] */
+#define AR5K_DIAG_SW_DIS_RX_5210 0x00000040 /* Disable receive */
+#define AR5K_DIAG_SW_DIS_RX_5211 0x00000020
+#define AR5K_DIAG_SW_DIS_RX (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_DIAG_SW_DIS_RX_5210 : AR5K_DIAG_SW_DIS_RX_5211)
+#define AR5K_DIAG_SW_LOOP_BACK_5210 0x00000080 /* TX Data Loopback (i guess it goes with DIS_TX) [5210] */
+#define AR5K_DIAG_SW_LOOP_BACK_5211 0x00000040
+#define AR5K_DIAG_SW_LOOP_BACK (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_DIAG_SW_LOOP_BACK_5210 : AR5K_DIAG_SW_LOOP_BACK_5211)
+#define AR5K_DIAG_SW_CORR_FCS_5210 0x00000100 /* Generate invalid TX FCS */
+#define AR5K_DIAG_SW_CORR_FCS_5211 0x00000080
+#define AR5K_DIAG_SW_CORR_FCS (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_DIAG_SW_CORR_FCS_5210 : AR5K_DIAG_SW_CORR_FCS_5211)
+#define AR5K_DIAG_SW_CHAN_INFO_5210 0x00000200 /* Add 56 bytes of channel info before the frame data in the RX buffer */
+#define AR5K_DIAG_SW_CHAN_INFO_5211 0x00000100
+#define AR5K_DIAG_SW_CHAN_INFO (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_DIAG_SW_CHAN_INFO_5210 : AR5K_DIAG_SW_CHAN_INFO_5211)
+#define AR5K_DIAG_SW_EN_SCRAM_SEED_5210 0x00000400 /* Enable fixed scrambler seed */
+#define AR5K_DIAG_SW_EN_SCRAM_SEED_5211 0x00000200
+#define AR5K_DIAG_SW_EN_SCRAM_SEED (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_DIAG_SW_EN_SCRAM_SEED_5210 : AR5K_DIAG_SW_EN_SCRAM_SEED_5211)
+#define AR5K_DIAG_SW_ECO_ENABLE 0x00000400 /* [5211+] */
+#define AR5K_DIAG_SW_SCVRAM_SEED 0x0003f800 /* [5210] */
+#define AR5K_DIAG_SW_SCRAM_SEED_M 0x0001fc00 /* Scrambler seed mask */
+#define AR5K_DIAG_SW_SCRAM_SEED_S 10
+#define AR5K_DIAG_SW_DIS_SEQ_INC_5210 0x00040000 /* Disable seqnum increment (?)[5210] */
+#define AR5K_DIAG_SW_FRAME_NV0_5210 0x00080000
+#define AR5K_DIAG_SW_FRAME_NV0_5211 0x00020000 /* Accept frames of non-zero protocol number */
+#define AR5K_DIAG_SW_FRAME_NV0 (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_DIAG_SW_FRAME_NV0_5210 : AR5K_DIAG_SW_FRAME_NV0_5211)
+#define AR5K_DIAG_SW_OBSPT_M 0x000c0000 /* Observation point select (?) */
+#define AR5K_DIAG_SW_OBSPT_S 18
+#define AR5K_DIAG_SW_RX_CLEAR_HIGH 0x00100000 /* Ignore carrier sense */
+#define AR5K_DIAG_SW_IGNORE_CARR_SENSE 0x00200000 /* Ignore virtual carrier sense */
+#define AR5K_DIAG_SW_CHANNEL_IDLE_HIGH 0x00400000 /* Force channel idle high */
+#define AR5K_DIAG_SW_PHEAR_ME 0x00800000 /* ??? */
+
+/*
+ * TSF (clock) register (lower 32 bits)
+ */
+#define AR5K_TSF_L32_5210 0x806c
+#define AR5K_TSF_L32_5211 0x804c
+#define AR5K_TSF_L32 (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_TSF_L32_5210 : AR5K_TSF_L32_5211)
+
+/*
+ * TSF (clock) register (higher 32 bits)
+ */
+#define AR5K_TSF_U32_5210 0x8070
+#define AR5K_TSF_U32_5211 0x8050
+#define AR5K_TSF_U32 (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_TSF_U32_5210 : AR5K_TSF_U32_5211)
+
+/*
+ * Last beacon timestamp register (Read Only)
+ */
+#define AR5K_LAST_TSTP 0x8080
+
+/*
+ * ADDAC test register [5211+]
+ */
+#define AR5K_ADDAC_TEST 0x8054 /* Register Address */
+#define AR5K_ADDAC_TEST_TXCONT 0x00000001 /* Test continuous tx */
+#define AR5K_ADDAC_TEST_TST_MODE 0x00000002 /* Test mode */
+#define AR5K_ADDAC_TEST_LOOP_EN 0x00000004 /* Enable loop */
+#define AR5K_ADDAC_TEST_LOOP_LEN 0x00000008 /* Loop length (field) */
+#define AR5K_ADDAC_TEST_USE_U8 0x00004000 /* Use upper 8 bits */
+#define AR5K_ADDAC_TEST_MSB 0x00008000 /* State of MSB */
+#define AR5K_ADDAC_TEST_TRIG_SEL 0x00010000 /* Trigger select */
+#define AR5K_ADDAC_TEST_TRIG_PTY 0x00020000 /* Trigger polarity */
+#define AR5K_ADDAC_TEST_RXCONT 0x00040000 /* Continuous capture */
+#define AR5K_ADDAC_TEST_CAPTURE 0x00080000 /* Begin capture */
+#define AR5K_ADDAC_TEST_TST_ARM 0x00100000 /* ARM rx buffer for capture */
+
+/*
+ * Default antenna register [5211+]
+ */
+#define AR5K_DEFAULT_ANTENNA 0x8058
+
+/*
+ * Frame control QoS mask register (?) [5211+]
+ * (FC_QOS_MASK)
+ */
+#define AR5K_FRAME_CTL_QOSM 0x805c
+
+/*
+ * Seq mask register (?) [5211+]
+ */
+#define AR5K_SEQ_MASK 0x8060
+
+/*
+ * Retry count register [5210]
+ */
+#define AR5K_RETRY_CNT 0x8084 /* Register Address [5210] */
+#define AR5K_RETRY_CNT_SSH 0x0000003f /* Station short retry count (?) */
+#define AR5K_RETRY_CNT_SLG 0x00000fc0 /* Station long retry count (?) */
+
+/*
+ * Back-off status register [5210]
+ */
+#define AR5K_BACKOFF 0x8088 /* Register Address [5210] */
+#define AR5K_BACKOFF_CW 0x000003ff /* Backoff Contention Window (?) */
+#define AR5K_BACKOFF_CNT 0x03ff0000 /* Backoff count (?) */
+
+
+
+/*
+ * NAV register (current)
+ */
+#define AR5K_NAV_5210 0x808c
+#define AR5K_NAV_5211 0x8084
+#define AR5K_NAV (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_NAV_5210 : AR5K_NAV_5211)
+
+/*
+ * MIB counters:
+ *
+ * max value is 0xc000, if this is reached we get a MIB interrupt.
+ * they can be controlled via AR5K_MIBC and are cleared on read.
+ */
+
+/*
+ * RTS success (MIB counter)
+ */
+#define AR5K_RTS_OK_5210 0x8090
+#define AR5K_RTS_OK_5211 0x8088
+#define AR5K_RTS_OK (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_RTS_OK_5210 : AR5K_RTS_OK_5211)
+
+/*
+ * RTS failure (MIB counter)
+ */
+#define AR5K_RTS_FAIL_5210 0x8094
+#define AR5K_RTS_FAIL_5211 0x808c
+#define AR5K_RTS_FAIL (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_RTS_FAIL_5210 : AR5K_RTS_FAIL_5211)
+
+/*
+ * ACK failure (MIB counter)
+ */
+#define AR5K_ACK_FAIL_5210 0x8098
+#define AR5K_ACK_FAIL_5211 0x8090
+#define AR5K_ACK_FAIL (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_ACK_FAIL_5210 : AR5K_ACK_FAIL_5211)
+
+/*
+ * FCS failure (MIB counter)
+ */
+#define AR5K_FCS_FAIL_5210 0x809c
+#define AR5K_FCS_FAIL_5211 0x8094
+#define AR5K_FCS_FAIL (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_FCS_FAIL_5210 : AR5K_FCS_FAIL_5211)
+
+/*
+ * Beacon count register
+ */
+#define AR5K_BEACON_CNT_5210 0x80a0
+#define AR5K_BEACON_CNT_5211 0x8098
+#define AR5K_BEACON_CNT (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_BEACON_CNT_5210 : AR5K_BEACON_CNT_5211)
+
+
+/*===5212 Specific PCU registers===*/
+
+/*
+ * Transmit power control register
+ */
+#define AR5K_TPC 0x80e8
+#define AR5K_TPC_ACK 0x0000003f /* ack frames */
+#define AR5K_TPC_ACK_S 0
+#define AR5K_TPC_CTS 0x00003f00 /* cts frames */
+#define AR5K_TPC_CTS_S 8
+#define AR5K_TPC_CHIRP 0x003f0000 /* chirp frames */
+#define AR5K_TPC_CHIRP_S 16
+#define AR5K_TPC_DOPPLER 0x0f000000 /* doppler chirp span */
+#define AR5K_TPC_DOPPLER_S 24
+
+/*
+ * XR (eXtended Range) mode register
+ */
+#define AR5K_XRMODE 0x80c0 /* Register Address */
+#define AR5K_XRMODE_POLL_TYPE_M 0x0000003f /* Mask for Poll type (?) */
+#define AR5K_XRMODE_POLL_TYPE_S 0
+#define AR5K_XRMODE_POLL_SUBTYPE_M 0x0000003c /* Mask for Poll subtype (?) */
+#define AR5K_XRMODE_POLL_SUBTYPE_S 2
+#define AR5K_XRMODE_POLL_WAIT_ALL 0x00000080 /* Wait for poll */
+#define AR5K_XRMODE_SIFS_DELAY 0x000fff00 /* Mask for SIFS delay */
+#define AR5K_XRMODE_FRAME_HOLD_M 0xfff00000 /* Mask for frame hold (?) */
+#define AR5K_XRMODE_FRAME_HOLD_S 20
+
+/*
+ * XR delay register
+ */
+#define AR5K_XRDELAY 0x80c4 /* Register Address */
+#define AR5K_XRDELAY_SLOT_DELAY_M 0x0000ffff /* Mask for slot delay */
+#define AR5K_XRDELAY_SLOT_DELAY_S 0
+#define AR5K_XRDELAY_CHIRP_DELAY_M 0xffff0000 /* Mask for CHIRP data delay */
+#define AR5K_XRDELAY_CHIRP_DELAY_S 16
+
+/*
+ * XR timeout register
+ */
+#define AR5K_XRTIMEOUT 0x80c8 /* Register Address */
+#define AR5K_XRTIMEOUT_CHIRP_M 0x0000ffff /* Mask for CHIRP timeout */
+#define AR5K_XRTIMEOUT_CHIRP_S 0
+#define AR5K_XRTIMEOUT_POLL_M 0xffff0000 /* Mask for Poll timeout */
+#define AR5K_XRTIMEOUT_POLL_S 16
+
+/*
+ * XR chirp register
+ */
+#define AR5K_XRCHIRP 0x80cc /* Register Address */
+#define AR5K_XRCHIRP_SEND 0x00000001 /* Send CHIRP */
+#define AR5K_XRCHIRP_GAP 0xffff0000 /* Mask for CHIRP gap (?) */
+
+/*
+ * XR stomp register
+ */
+#define AR5K_XRSTOMP 0x80d0 /* Register Address */
+#define AR5K_XRSTOMP_TX 0x00000001 /* Stomp Tx (?) */
+#define AR5K_XRSTOMP_RX 0x00000002 /* Stomp Rx (?) */
+#define AR5K_XRSTOMP_TX_RSSI 0x00000004 /* Stomp Tx RSSI (?) */
+#define AR5K_XRSTOMP_TX_BSSID 0x00000008 /* Stomp Tx BSSID (?) */
+#define AR5K_XRSTOMP_DATA 0x00000010 /* Stomp data (?)*/
+#define AR5K_XRSTOMP_RSSI_THRES 0x0000ff00 /* Mask for XR RSSI threshold */
+
+/*
+ * First enhanced sleep register
+ */
+#define AR5K_SLEEP0 0x80d4 /* Register Address */
+#define AR5K_SLEEP0_NEXT_DTIM 0x0007ffff /* Mask for next DTIM (?) */
+#define AR5K_SLEEP0_NEXT_DTIM_S 0
+#define AR5K_SLEEP0_ASSUME_DTIM 0x00080000 /* Assume DTIM */
+#define AR5K_SLEEP0_ENH_SLEEP_EN 0x00100000 /* Enable enhanced sleep control */
+#define AR5K_SLEEP0_CABTO 0xff000000 /* Mask for CAB Time Out */
+#define AR5K_SLEEP0_CABTO_S 24
+
+/*
+ * Second enhanced sleep register
+ */
+#define AR5K_SLEEP1 0x80d8 /* Register Address */
+#define AR5K_SLEEP1_NEXT_TIM 0x0007ffff /* Mask for next TIM (?) */
+#define AR5K_SLEEP1_NEXT_TIM_S 0
+#define AR5K_SLEEP1_BEACON_TO 0xff000000 /* Mask for Beacon Time Out */
+#define AR5K_SLEEP1_BEACON_TO_S 24
+
+/*
+ * Third enhanced sleep register
+ */
+#define AR5K_SLEEP2 0x80dc /* Register Address */
+#define AR5K_SLEEP2_TIM_PER 0x0000ffff /* Mask for TIM period (?) */
+#define AR5K_SLEEP2_TIM_PER_S 0
+#define AR5K_SLEEP2_DTIM_PER 0xffff0000 /* Mask for DTIM period (?) */
+#define AR5K_SLEEP2_DTIM_PER_S 16
+
+/*
+ * TX power control (TPC) register
+ *
+ * XXX: PCDAC steps (0.5dBm) or dBm ?
+ *
+ */
+#define AR5K_TXPC 0x80e8 /* Register Address */
+#define AR5K_TXPC_ACK_M 0x0000003f /* ACK tx power */
+#define AR5K_TXPC_ACK_S 0
+#define AR5K_TXPC_CTS_M 0x00003f00 /* CTS tx power */
+#define AR5K_TXPC_CTS_S 8
+#define AR5K_TXPC_CHIRP_M 0x003f0000 /* CHIRP tx power */
+#define AR5K_TXPC_CHIRP_S 16
+#define AR5K_TXPC_DOPPLER 0x0f000000 /* Doppler chirp span (?) */
+#define AR5K_TXPC_DOPPLER_S 24
+
+/*
+ * Profile count registers
+ *
+ * These registers can be cleared and frozen with ATH5K_MIBC, but they do not
+ * generate a MIB interrupt.
+ * Instead of overflowing, they shift by one bit to the right. All registers
+ * shift together, i.e. when one reaches the max, all shift at the same time by
+ * one bit to the right. This way we should always get consistent values.
+ */
+#define AR5K_PROFCNT_TX 0x80ec /* Tx count */
+#define AR5K_PROFCNT_RX 0x80f0 /* Rx count */
+#define AR5K_PROFCNT_RXCLR 0x80f4 /* Busy count */
+#define AR5K_PROFCNT_CYCLE 0x80f8 /* Cycle counter */
+
+/*
+ * Quiet period control registers
+ */
+#define AR5K_QUIET_CTL1 0x80fc /* Register Address */
+#define AR5K_QUIET_CTL1_NEXT_QT_TSF 0x0000ffff /* Next quiet period TSF (TU) */
+#define AR5K_QUIET_CTL1_NEXT_QT_TSF_S 0
+#define AR5K_QUIET_CTL1_QT_EN 0x00010000 /* Enable quiet period */
+#define AR5K_QUIET_CTL1_ACK_CTS_EN 0x00020000 /* Send ACK/CTS during quiet period */
+
+#define AR5K_QUIET_CTL2 0x8100 /* Register Address */
+#define AR5K_QUIET_CTL2_QT_PER 0x0000ffff /* Mask for quiet period periodicity */
+#define AR5K_QUIET_CTL2_QT_PER_S 0
+#define AR5K_QUIET_CTL2_QT_DUR 0xffff0000 /* Mask for quiet period duration */
+#define AR5K_QUIET_CTL2_QT_DUR_S 16
+
+/*
+ * TSF parameter register
+ */
+#define AR5K_TSF_PARM 0x8104 /* Register Address */
+#define AR5K_TSF_PARM_INC 0x000000ff /* Mask for TSF increment */
+#define AR5K_TSF_PARM_INC_S 0
+
+/*
+ * QoS NOACK policy
+ */
+#define AR5K_QOS_NOACK 0x8108 /* Register Address */
+#define AR5K_QOS_NOACK_2BIT_VALUES 0x0000000f /* ??? */
+#define AR5K_QOS_NOACK_2BIT_VALUES_S 0
+#define AR5K_QOS_NOACK_BIT_OFFSET 0x00000070 /* ??? */
+#define AR5K_QOS_NOACK_BIT_OFFSET_S 4
+#define AR5K_QOS_NOACK_BYTE_OFFSET 0x00000180 /* ??? */
+#define AR5K_QOS_NOACK_BYTE_OFFSET_S 7
+
+/*
+ * PHY error filter register
+ */
+#define AR5K_PHY_ERR_FIL 0x810c
+#define AR5K_PHY_ERR_FIL_RADAR 0x00000020 /* Radar signal */
+#define AR5K_PHY_ERR_FIL_OFDM 0x00020000 /* OFDM false detect (ANI) */
+#define AR5K_PHY_ERR_FIL_CCK 0x02000000 /* CCK false detect (ANI) */
+
+/*
+ * XR latency register
+ */
+#define AR5K_XRLAT_TX 0x8110
+
+/*
+ * ACK SIFS register
+ */
+#define AR5K_ACKSIFS 0x8114 /* Register Address */
+#define AR5K_ACKSIFS_INC 0x00000000 /* ACK SIFS Increment (field) */
+
+/*
+ * MIC QoS control register (?)
+ */
+#define AR5K_MIC_QOS_CTL 0x8118 /* Register Address */
+#define AR5K_MIC_QOS_CTL_OFF(_n) (1 << (_n * 2))
+#define AR5K_MIC_QOS_CTL_MQ_EN 0x00010000 /* Enable MIC QoS */
+
+/*
+ * MIC QoS select register (?)
+ */
+#define AR5K_MIC_QOS_SEL 0x811c
+#define AR5K_MIC_QOS_SEL_OFF(_n) (1 << (_n * 4))
+
+/*
+ * Misc mode control register (?)
+ */
+#define AR5K_MISC_MODE 0x8120 /* Register Address */
+#define AR5K_MISC_MODE_FBSSID_MATCH 0x00000001 /* Force BSSID match */
+#define AR5K_MISC_MODE_ACKSIFS_MEM 0x00000002 /* ACK SIFS memory (?) */
+#define AR5K_MISC_MODE_COMBINED_MIC 0x00000004 /* use rx/tx MIC key */
+/* more bits */
+
+/*
+ * OFDM Filter counter
+ */
+#define AR5K_OFDM_FIL_CNT 0x8124
+
+/*
+ * CCK Filter counter
+ */
+#define AR5K_CCK_FIL_CNT 0x8128
+
+/*
+ * PHY Error Counters (same masks as AR5K_PHY_ERR_FIL)
+ */
+#define AR5K_PHYERR_CNT1 0x812c
+#define AR5K_PHYERR_CNT1_MASK 0x8130
+
+#define AR5K_PHYERR_CNT2 0x8134
+#define AR5K_PHYERR_CNT2_MASK 0x8138
+
+/* if the PHY Error Counters reach this maximum, we get MIB interrupts */
+#define ATH5K_PHYERR_CNT_MAX 0x00c00000
+
+/*
+ * TSF Threshold register (?)
+ */
+#define AR5K_TSF_THRES 0x813c
+
+/*
+ * TODO: Wake On Wireless registers
+ * Range: 0x8147 - 0x818c
+ */
+
+/*
+ * Rate -> ACK SIFS mapping table (32 entries)
+ */
+#define AR5K_RATE_ACKSIFS_BASE 0x8680 /* Register Address */
+#define AR5K_RATE_ACKSIFS(_n) (AR5K_RATE_ACKSIFS_BSE + ((_n) << 2))
+#define AR5K_RATE_ACKSIFS_NORMAL 0x00000001 /* Normal SIFS (field) */
+#define AR5K_RATE_ACKSIFS_TURBO 0x00000400 /* Turbo SIFS (field) */
+
+/*
+ * Rate -> duration mapping table (32 entries)
+ */
+#define AR5K_RATE_DUR_BASE 0x8700
+#define AR5K_RATE_DUR(_n) (AR5K_RATE_DUR_BASE + ((_n) << 2))
+
+/*
+ * Rate -> db mapping table
+ * (8 entries, each one has 4 8bit fields)
+ */
+#define AR5K_RATE2DB_BASE 0x87c0
+#define AR5K_RATE2DB(_n) (AR5K_RATE2DB_BASE + ((_n) << 2))
+
+/*
+ * db -> Rate mapping table
+ * (8 entries, each one has 4 8bit fields)
+ */
+#define AR5K_DB2RATE_BASE 0x87e0
+#define AR5K_DB2RATE(_n) (AR5K_DB2RATE_BASE + ((_n) << 2))
+
+/*===5212 end===*/
+
+#define AR5K_KEYTABLE_SIZE_5210 64
+#define AR5K_KEYTABLE_SIZE_5211 128
+
+/*===PHY REGISTERS===*/
+
+/*
+ * PHY registers start
+ */
+#define AR5K_PHY_BASE 0x9800
+#define AR5K_PHY(_n) (AR5K_PHY_BASE + ((_n) << 2))
+
+/*
+ * TST_2 (Misc config parameters)
+ */
+#define AR5K_PHY_TST2 0x9800 /* Register Address */
+#define AR5K_PHY_TST2_TRIG_SEL 0x00000007 /* Trigger select (?)*/
+#define AR5K_PHY_TST2_TRIG 0x00000010 /* Trigger (?) */
+#define AR5K_PHY_TST2_CBUS_MODE 0x00000060 /* Cardbus mode (?) */
+#define AR5K_PHY_TST2_CLK32 0x00000400 /* CLK_OUT is CLK32 (32kHz external) */
+#define AR5K_PHY_TST2_CHANCOR_DUMP_EN 0x00000800 /* Enable Chancor dump (?) */
+#define AR5K_PHY_TST2_EVEN_CHANCOR_DUMP 0x00001000 /* Even Chancor dump (?) */
+#define AR5K_PHY_TST2_RFSILENT_EN 0x00002000 /* Enable RFSILENT */
+#define AR5K_PHY_TST2_ALT_RFDATA 0x00004000 /* Alternate RFDATA (5-2GHz switch ?) */
+#define AR5K_PHY_TST2_MINI_OBS_EN 0x00008000 /* Enable mini OBS (?) */
+#define AR5K_PHY_TST2_RX2_IS_RX5_INV 0x00010000 /* 2GHz rx path is the 5GHz path inverted (?) */
+#define AR5K_PHY_TST2_SLOW_CLK160 0x00020000 /* Slow CLK160 (?) */
+#define AR5K_PHY_TST2_AGC_OBS_SEL_3 0x00040000 /* AGC OBS Select 3 (?) */
+#define AR5K_PHY_TST2_BBB_OBS_SEL 0x00080000 /* BB OBS Select (field ?) */
+#define AR5K_PHY_TST2_ADC_OBS_SEL 0x00800000 /* ADC OBS Select (field ?) */
+#define AR5K_PHY_TST2_RX_CLR_SEL 0x08000000 /* RX Clear Select (?) */
+#define AR5K_PHY_TST2_FORCE_AGC_CLR 0x10000000 /* Force AGC clear (?) */
+#define AR5K_PHY_SHIFT_2GHZ 0x00004007 /* Used to access 2GHz radios */
+#define AR5K_PHY_SHIFT_5GHZ 0x00000007 /* Used to access 5GHz radios (default) */
+
+/*
+ * PHY frame control register [5110] /turbo mode register [5111+]
+ *
+ * There is another frame control register for [5111+]
+ * at address 0x9944 (see below) but the 2 first flags
+ * are common here between 5110 frame control register
+ * and [5111+] turbo mode register, so this also works as
+ * a "turbo mode register" for 5110. We treat this one as
+ * a frame control register for 5110 below.
+ */
+#define AR5K_PHY_TURBO 0x9804 /* Register Address */
+#define AR5K_PHY_TURBO_MODE 0x00000001 /* Enable turbo mode */
+#define AR5K_PHY_TURBO_SHORT 0x00000002 /* Set short symbols to turbo mode */
+#define AR5K_PHY_TURBO_MIMO 0x00000004 /* Set turbo for mimo */
+
+/*
+ * PHY agility command register
+ * (aka TST_1)
+ */
+#define AR5K_PHY_AGC 0x9808 /* Register Address */
+#define AR5K_PHY_TST1 0x9808
+#define AR5K_PHY_AGC_DISABLE 0x08000000 /* Disable AGC to A2 (?)*/
+#define AR5K_PHY_TST1_TXHOLD 0x00003800 /* Set tx hold (?) */
+#define AR5K_PHY_TST1_TXSRC_SRC 0x00000002 /* Used with bit 7 (?) */
+#define AR5K_PHY_TST1_TXSRC_SRC_S 1
+#define AR5K_PHY_TST1_TXSRC_ALT 0x00000080 /* Set input to tsdac (?) */
+#define AR5K_PHY_TST1_TXSRC_ALT_S 7
+
+
+/*
+ * PHY timing register 3 [5112+]
+ */
+#define AR5K_PHY_TIMING_3 0x9814
+#define AR5K_PHY_TIMING_3_DSC_MAN 0xfffe0000
+#define AR5K_PHY_TIMING_3_DSC_MAN_S 17
+#define AR5K_PHY_TIMING_3_DSC_EXP 0x0001e000
+#define AR5K_PHY_TIMING_3_DSC_EXP_S 13
+
+/*
+ * PHY chip revision register
+ */
+#define AR5K_PHY_CHIP_ID 0x9818
+
+/*
+ * PHY activation register
+ */
+#define AR5K_PHY_ACT 0x981c /* Register Address */
+#define AR5K_PHY_ACT_ENABLE 0x00000001 /* Activate PHY */
+#define AR5K_PHY_ACT_DISABLE 0x00000002 /* Deactivate PHY */
+
+/*
+ * PHY RF control registers
+ */
+#define AR5K_PHY_RF_CTL2 0x9824 /* Register Address */
+#define AR5K_PHY_RF_CTL2_TXF2TXD_START 0x0000000f /* TX frame to TX data start */
+#define AR5K_PHY_RF_CTL2_TXF2TXD_START_S 0
+
+#define AR5K_PHY_RF_CTL3 0x9828 /* Register Address */
+#define AR5K_PHY_RF_CTL3_TXE2XLNA_ON 0x0000ff00 /* TX end to XLNA on */
+#define AR5K_PHY_RF_CTL3_TXE2XLNA_ON_S 8
+
+#define AR5K_PHY_ADC_CTL 0x982c
+#define AR5K_PHY_ADC_CTL_INBUFGAIN_OFF 0x00000003
+#define AR5K_PHY_ADC_CTL_INBUFGAIN_OFF_S 0
+#define AR5K_PHY_ADC_CTL_PWD_DAC_OFF 0x00002000
+#define AR5K_PHY_ADC_CTL_PWD_BAND_GAP_OFF 0x00004000
+#define AR5K_PHY_ADC_CTL_PWD_ADC_OFF 0x00008000
+#define AR5K_PHY_ADC_CTL_INBUFGAIN_ON 0x00030000
+#define AR5K_PHY_ADC_CTL_INBUFGAIN_ON_S 16
+
+#define AR5K_PHY_RF_CTL4 0x9834 /* Register Address */
+#define AR5K_PHY_RF_CTL4_TXF2XPA_A_ON 0x00000001 /* TX frame to XPA A on (field) */
+#define AR5K_PHY_RF_CTL4_TXF2XPA_B_ON 0x00000100 /* TX frame to XPA B on (field) */
+#define AR5K_PHY_RF_CTL4_TXE2XPA_A_OFF 0x00010000 /* TX end to XPA A off (field) */
+#define AR5K_PHY_RF_CTL4_TXE2XPA_B_OFF 0x01000000 /* TX end to XPA B off (field) */
+
+/*
+ * Pre-Amplifier control register
+ * (XPA -> external pre-amplifier)
+ */
+#define AR5K_PHY_PA_CTL 0x9838 /* Register Address */
+#define AR5K_PHY_PA_CTL_XPA_A_HI 0x00000001 /* XPA A high (?) */
+#define AR5K_PHY_PA_CTL_XPA_B_HI 0x00000002 /* XPA B high (?) */
+#define AR5K_PHY_PA_CTL_XPA_A_EN 0x00000004 /* Enable XPA A */
+#define AR5K_PHY_PA_CTL_XPA_B_EN 0x00000008 /* Enable XPA B */
+
+/*
+ * PHY settling register
+ */
+#define AR5K_PHY_SETTLING 0x9844 /* Register Address */
+#define AR5K_PHY_SETTLING_AGC 0x0000007f /* AGC settling time */
+#define AR5K_PHY_SETTLING_AGC_S 0
+#define AR5K_PHY_SETTLING_SWITCH 0x00003f80 /* Switch settling time */
+#define AR5K_PHY_SETTLING_SWITCH_S 7
+
+/*
+ * PHY Gain registers
+ */
+#define AR5K_PHY_GAIN 0x9848 /* Register Address */
+#define AR5K_PHY_GAIN_TXRX_ATTEN 0x0003f000 /* TX-RX Attenuation */
+#define AR5K_PHY_GAIN_TXRX_ATTEN_S 12
+#define AR5K_PHY_GAIN_TXRX_RF_MAX 0x007c0000
+#define AR5K_PHY_GAIN_TXRX_RF_MAX_S 18
+
+#define AR5K_PHY_GAIN_OFFSET 0x984c /* Register Address */
+#define AR5K_PHY_GAIN_OFFSET_RXTX_FLAG 0x00020000 /* RX-TX flag (?) */
+
+/*
+ * Desired ADC/PGA size register
+ * (for more infos read ANI patent)
+ */
+#define AR5K_PHY_DESIRED_SIZE 0x9850 /* Register Address */
+#define AR5K_PHY_DESIRED_SIZE_ADC 0x000000ff /* ADC desired size */
+#define AR5K_PHY_DESIRED_SIZE_ADC_S 0
+#define AR5K_PHY_DESIRED_SIZE_PGA 0x0000ff00 /* PGA desired size */
+#define AR5K_PHY_DESIRED_SIZE_PGA_S 8
+#define AR5K_PHY_DESIRED_SIZE_TOT 0x0ff00000 /* Total desired size */
+#define AR5K_PHY_DESIRED_SIZE_TOT_S 20
+
+/*
+ * PHY signal register
+ * (for more infos read ANI patent)
+ */
+#define AR5K_PHY_SIG 0x9858 /* Register Address */
+#define AR5K_PHY_SIG_FIRSTEP 0x0003f000 /* FIRSTEP */
+#define AR5K_PHY_SIG_FIRSTEP_S 12
+#define AR5K_PHY_SIG_FIRPWR 0x03fc0000 /* FIPWR */
+#define AR5K_PHY_SIG_FIRPWR_S 18
+
+/*
+ * PHY coarse agility control register
+ * (for more infos read ANI patent)
+ */
+#define AR5K_PHY_AGCCOARSE 0x985c /* Register Address */
+#define AR5K_PHY_AGCCOARSE_LO 0x00007f80 /* AGC Coarse low */
+#define AR5K_PHY_AGCCOARSE_LO_S 7
+#define AR5K_PHY_AGCCOARSE_HI 0x003f8000 /* AGC Coarse high */
+#define AR5K_PHY_AGCCOARSE_HI_S 15
+
+/*
+ * PHY agility control register
+ */
+#define AR5K_PHY_AGCCTL 0x9860 /* Register address */
+#define AR5K_PHY_AGCCTL_CAL 0x00000001 /* Enable PHY calibration */
+#define AR5K_PHY_AGCCTL_NF 0x00000002 /* Enable Noise Floor calibration */
+#define AR5K_PHY_AGCCTL_OFDM_DIV_DIS 0x00000008 /* Disable antenna diversity on OFDM modes */
+#define AR5K_PHY_AGCCTL_NF_EN 0x00008000 /* Enable nf calibration to happen (?) */
+#define AR5K_PHY_AGCTL_FLTR_CAL 0x00010000 /* Allow filter calibration (?) */
+#define AR5K_PHY_AGCCTL_NF_NOUPDATE 0x00020000 /* Don't update nf automatically */
+
+/*
+ * PHY noise floor status register (CCA = Clear Channel Assessment)
+ */
+#define AR5K_PHY_NF 0x9864 /* Register address */
+#define AR5K_PHY_NF_M 0x000001ff /* Noise floor, written to hardware in 1/2 dBm units */
+#define AR5K_PHY_NF_SVAL(_n) (((_n) & AR5K_PHY_NF_M) | (1 << 9))
+#define AR5K_PHY_NF_THRESH62 0x0007f000 /* Thresh62 -check ANI patent- (field) */
+#define AR5K_PHY_NF_THRESH62_S 12
+#define AR5K_PHY_NF_MINCCA_PWR 0x0ff80000 /* Minimum measured noise level, read from hardware in 1 dBm units */
+#define AR5K_PHY_NF_MINCCA_PWR_S 19
+
+/*
+ * PHY ADC saturation register [5110]
+ */
+#define AR5K_PHY_ADCSAT 0x9868
+#define AR5K_PHY_ADCSAT_ICNT 0x0001f800
+#define AR5K_PHY_ADCSAT_ICNT_S 11
+#define AR5K_PHY_ADCSAT_THR 0x000007e0
+#define AR5K_PHY_ADCSAT_THR_S 5
+
+/*
+ * PHY Weak ofdm signal detection threshold registers (ANI) [5212+]
+ */
+
+/* High thresholds */
+#define AR5K_PHY_WEAK_OFDM_HIGH_THR 0x9868
+#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2_COUNT 0x0000001f
+#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2_COUNT_S 0
+#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M1 0x00fe0000
+#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M1_S 17
+#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2 0x7f000000
+#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2_S 24
+
+/* Low thresholds */
+#define AR5K_PHY_WEAK_OFDM_LOW_THR 0x986c
+#define AR5K_PHY_WEAK_OFDM_LOW_THR_SELFCOR_EN 0x00000001
+#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2_COUNT 0x00003f00
+#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2_COUNT_S 8
+#define AR5K_PHY_WEAK_OFDM_LOW_THR_M1 0x001fc000
+#define AR5K_PHY_WEAK_OFDM_LOW_THR_M1_S 14
+#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2 0x0fe00000
+#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2_S 21
+
+
+/*
+ * PHY sleep registers [5112+]
+ */
+#define AR5K_PHY_SCR 0x9870
+
+#define AR5K_PHY_SLMT 0x9874
+#define AR5K_PHY_SLMT_32MHZ 0x0000007f
+
+#define AR5K_PHY_SCAL 0x9878
+#define AR5K_PHY_SCAL_32MHZ 0x0000000e
+#define AR5K_PHY_SCAL_32MHZ_5311 0x00000008
+#define AR5K_PHY_SCAL_32MHZ_2417 0x0000000a
+#define AR5K_PHY_SCAL_32MHZ_HB63 0x00000032
+
+/*
+ * PHY PLL (Phase Locked Loop) control register
+ */
+#define AR5K_PHY_PLL 0x987c
+#define AR5K_PHY_PLL_20MHZ 0x00000013 /* For half rate (?) */
+/* 40MHz -> 5GHz band */
+#define AR5K_PHY_PLL_40MHZ_5211 0x00000018
+#define AR5K_PHY_PLL_40MHZ_5212 0x000000aa
+#define AR5K_PHY_PLL_40MHZ_5413 0x00000004
+#define AR5K_PHY_PLL_40MHZ (ah->ah_version == AR5K_AR5211 ? \
+ AR5K_PHY_PLL_40MHZ_5211 : AR5K_PHY_PLL_40MHZ_5212)
+/* 44MHz -> 2.4GHz band */
+#define AR5K_PHY_PLL_44MHZ_5211 0x00000019
+#define AR5K_PHY_PLL_44MHZ_5212 0x000000ab
+#define AR5K_PHY_PLL_44MHZ (ah->ah_version == AR5K_AR5211 ? \
+ AR5K_PHY_PLL_44MHZ_5211 : AR5K_PHY_PLL_44MHZ_5212)
+
+#define AR5K_PHY_PLL_RF5111 0x00000000
+#define AR5K_PHY_PLL_RF5112 0x00000040
+#define AR5K_PHY_PLL_HALF_RATE 0x00000100
+#define AR5K_PHY_PLL_QUARTER_RATE 0x00000200
+
+/*
+ * RF Buffer register
+ *
+ * It's obvious from the code that 0x989c is the buffer register but
+ * for the other special registers that we write to after sending each
+ * packet, i have no idea. So I'll name them BUFFER_CONTROL_X registers
+ * for now. It's interesting that they are also used for some other operations.
+ */
+
+#define AR5K_RF_BUFFER 0x989c
+#define AR5K_RF_BUFFER_CONTROL_0 0x98c0 /* Channel on 5110 */
+#define AR5K_RF_BUFFER_CONTROL_1 0x98c4 /* Bank 7 on 5112 */
+#define AR5K_RF_BUFFER_CONTROL_2 0x98cc /* Bank 7 on 5111 */
+
+#define AR5K_RF_BUFFER_CONTROL_3 0x98d0 /* Bank 2 on 5112 */
+ /* Channel set on 5111 */
+ /* Used to read radio revision*/
+
+#define AR5K_RF_BUFFER_CONTROL_4 0x98d4 /* RF Stage register on 5110 */
+ /* Bank 0,1,2,6 on 5111 */
+ /* Bank 1 on 5112 */
+ /* Used during activation on 5111 */
+
+#define AR5K_RF_BUFFER_CONTROL_5 0x98d8 /* Bank 3 on 5111 */
+ /* Used during activation on 5111 */
+ /* Channel on 5112 */
+ /* Bank 6 on 5112 */
+
+#define AR5K_RF_BUFFER_CONTROL_6 0x98dc /* Bank 3 on 5112 */
+
+/*
+ * PHY RF stage register [5210]
+ */
+#define AR5K_PHY_RFSTG 0x98d4
+#define AR5K_PHY_RFSTG_DISABLE 0x00000021
+
+/*
+ * BIN masks (?)
+ */
+#define AR5K_PHY_BIN_MASK_1 0x9900
+#define AR5K_PHY_BIN_MASK_2 0x9904
+#define AR5K_PHY_BIN_MASK_3 0x9908
+
+#define AR5K_PHY_BIN_MASK_CTL 0x990c
+#define AR5K_PHY_BIN_MASK_CTL_MASK_4 0x00003fff
+#define AR5K_PHY_BIN_MASK_CTL_MASK_4_S 0
+#define AR5K_PHY_BIN_MASK_CTL_RATE 0xff000000
+#define AR5K_PHY_BIN_MASK_CTL_RATE_S 24
+
+/*
+ * PHY Antenna control register
+ */
+#define AR5K_PHY_ANT_CTL 0x9910 /* Register Address */
+#define AR5K_PHY_ANT_CTL_TXRX_EN 0x00000001 /* Enable TX/RX (?) */
+#define AR5K_PHY_ANT_CTL_SECTORED_ANT 0x00000004 /* Sectored Antenna */
+#define AR5K_PHY_ANT_CTL_HITUNE5 0x00000008 /* Hitune5 (?) */
+#define AR5K_PHY_ANT_CTL_SWTABLE_IDLE 0x000003f0 /* Switch table idle (?) */
+#define AR5K_PHY_ANT_CTL_SWTABLE_IDLE_S 4
+
+/*
+ * PHY receiver delay register [5111+]
+ */
+#define AR5K_PHY_RX_DELAY 0x9914 /* Register Address */
+#define AR5K_PHY_RX_DELAY_M 0x00003fff /* Mask for RX activate to receive delay (/100ns) */
+
+/*
+ * PHY max rx length register (?) [5111]
+ */
+#define AR5K_PHY_MAX_RX_LEN 0x991c
+
+/*
+ * PHY timing register 4
+ * I(nphase)/Q(adrature) calibration register [5111+]
+ */
+#define AR5K_PHY_IQ 0x9920 /* Register Address */
+#define AR5K_PHY_IQ_CORR_Q_Q_COFF 0x0000001f /* Mask for q correction info */
+#define AR5K_PHY_IQ_CORR_Q_Q_COFF_S 0
+#define AR5K_PHY_IQ_CORR_Q_I_COFF 0x000007e0 /* Mask for i correction info */
+#define AR5K_PHY_IQ_CORR_Q_I_COFF_S 5
+#define AR5K_PHY_IQ_CORR_ENABLE 0x00000800 /* Enable i/q correction */
+#define AR5K_PHY_IQ_CAL_NUM_LOG_MAX 0x0000f000 /* Mask for max number of samples in log scale */
+#define AR5K_PHY_IQ_CAL_NUM_LOG_MAX_S 12
+#define AR5K_PHY_IQ_RUN 0x00010000 /* Run i/q calibration */
+#define AR5K_PHY_IQ_USE_PT_DF 0x00020000 /* Use pilot track df (?) */
+#define AR5K_PHY_IQ_EARLY_TRIG_THR 0x00200000 /* Early trigger threshold (?) (field) */
+#define AR5K_PHY_IQ_PILOT_MASK_EN 0x10000000 /* Enable pilot mask (?) */
+#define AR5K_PHY_IQ_CHAN_MASK_EN 0x20000000 /* Enable channel mask (?) */
+#define AR5K_PHY_IQ_SPUR_FILT_EN 0x40000000 /* Enable spur filter */
+#define AR5K_PHY_IQ_SPUR_RSSI_EN 0x80000000 /* Enable spur rssi */
+
+/*
+ * PHY timing register 5
+ * OFDM Self-correlator Cyclic RSSI threshold params
+ * (Check out bb_cycpwr_thr1 on ANI patent)
+ */
+#define AR5K_PHY_OFDM_SELFCORR 0x9924 /* Register Address */
+#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1_EN 0x00000001 /* Enable cyclic RSSI thr 1 */
+#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1 0x000000fe /* Mask for Cyclic RSSI threshold 1 */
+#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1_S 1
+#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR3 0x00000100 /* Cyclic RSSI threshold 3 (field) (?) */
+#define AR5K_PHY_OFDM_SELFCORR_RSSI_1ATHR_EN 0x00008000 /* Enable 1A RSSI threshold (?) */
+#define AR5K_PHY_OFDM_SELFCORR_RSSI_1ATHR 0x00010000 /* 1A RSSI threshold (field) (?) */
+#define AR5K_PHY_OFDM_SELFCORR_LSCTHR_HIRSSI 0x00800000 /* Long sc threshold hi rssi (?) */
+
+/*
+ * PHY-only warm reset register
+ */
+#define AR5K_PHY_WARM_RESET 0x9928
+
+/*
+ * PHY-only control register
+ */
+#define AR5K_PHY_CTL 0x992c /* Register Address */
+#define AR5K_PHY_CTL_RX_DRAIN_RATE 0x00000001 /* RX drain rate (?) */
+#define AR5K_PHY_CTL_LATE_TX_SIG_SYM 0x00000002 /* Late tx signal symbol (?) */
+#define AR5K_PHY_CTL_GEN_SCRAMBLER 0x00000004 /* Generate scrambler */
+#define AR5K_PHY_CTL_TX_ANT_SEL 0x00000008 /* TX antenna select */
+#define AR5K_PHY_CTL_TX_ANT_STATIC 0x00000010 /* Static TX antenna */
+#define AR5K_PHY_CTL_RX_ANT_SEL 0x00000020 /* RX antenna select */
+#define AR5K_PHY_CTL_RX_ANT_STATIC 0x00000040 /* Static RX antenna */
+#define AR5K_PHY_CTL_LOW_FREQ_SLE_EN 0x00000080 /* Enable low freq sleep */
+
+/*
+ * PHY PAPD probe register [5111+]
+ */
+#define AR5K_PHY_PAPD_PROBE 0x9930
+#define AR5K_PHY_PAPD_PROBE_SH_HI_PAR 0x00000001
+#define AR5K_PHY_PAPD_PROBE_PCDAC_BIAS 0x00000002
+#define AR5K_PHY_PAPD_PROBE_COMP_GAIN 0x00000040
+#define AR5K_PHY_PAPD_PROBE_TXPOWER 0x00007e00
+#define AR5K_PHY_PAPD_PROBE_TXPOWER_S 9
+#define AR5K_PHY_PAPD_PROBE_TX_NEXT 0x00008000
+#define AR5K_PHY_PAPD_PROBE_PREDIST_EN 0x00010000
+#define AR5K_PHY_PAPD_PROBE_TYPE 0x01800000 /* [5112+] */
+#define AR5K_PHY_PAPD_PROBE_TYPE_S 23
+#define AR5K_PHY_PAPD_PROBE_TYPE_OFDM 0
+#define AR5K_PHY_PAPD_PROBE_TYPE_XR 1
+#define AR5K_PHY_PAPD_PROBE_TYPE_CCK 2
+#define AR5K_PHY_PAPD_PROBE_GAINF 0xfe000000
+#define AR5K_PHY_PAPD_PROBE_GAINF_S 25
+#define AR5K_PHY_PAPD_PROBE_INI_5111 0x00004883 /* [5212+] */
+#define AR5K_PHY_PAPD_PROBE_INI_5112 0x00004882 /* [5212+] */
+
+/*
+ * PHY TX rate power registers [5112+]
+ */
+#define AR5K_PHY_TXPOWER_RATE1 0x9934
+#define AR5K_PHY_TXPOWER_RATE2 0x9938
+#define AR5K_PHY_TXPOWER_RATE_MAX 0x993c
+#define AR5K_PHY_TXPOWER_RATE_MAX_TPC_ENABLE 0x00000040
+#define AR5K_PHY_TXPOWER_RATE3 0xa234
+#define AR5K_PHY_TXPOWER_RATE4 0xa238
+
+/*
+ * PHY frame control register [5111+]
+ */
+#define AR5K_PHY_FRAME_CTL_5210 0x9804
+#define AR5K_PHY_FRAME_CTL_5211 0x9944
+#define AR5K_PHY_FRAME_CTL (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_PHY_FRAME_CTL_5210 : AR5K_PHY_FRAME_CTL_5211)
+/*---[5111+]---*/
+#define AR5K_PHY_FRAME_CTL_WIN_LEN 0x00000003 /* Force window length (?) */
+#define AR5K_PHY_FRAME_CTL_WIN_LEN_S 0
+#define AR5K_PHY_FRAME_CTL_TX_CLIP 0x00000038 /* Mask for tx clip (?) */
+#define AR5K_PHY_FRAME_CTL_TX_CLIP_S 3
+#define AR5K_PHY_FRAME_CTL_PREP_CHINFO 0x00010000 /* Prepend chan info */
+#define AR5K_PHY_FRAME_CTL_EMU 0x80000000
+#define AR5K_PHY_FRAME_CTL_EMU_S 31
+/*---[5110/5111]---*/
+#define AR5K_PHY_FRAME_CTL_TIMING_ERR 0x01000000 /* PHY timing error */
+#define AR5K_PHY_FRAME_CTL_PARITY_ERR 0x02000000 /* Parity error */
+#define AR5K_PHY_FRAME_CTL_ILLRATE_ERR 0x04000000 /* Illegal rate */
+#define AR5K_PHY_FRAME_CTL_ILLLEN_ERR 0x08000000 /* Illegal length */
+#define AR5K_PHY_FRAME_CTL_SERVICE_ERR 0x20000000
+#define AR5K_PHY_FRAME_CTL_TXURN_ERR 0x40000000 /* TX underrun */
+#define AR5K_PHY_FRAME_CTL_INI \
+ (AR5K_PHY_FRAME_CTL_SERVICE_ERR | \
+ AR5K_PHY_FRAME_CTL_TXURN_ERR | \
+ AR5K_PHY_FRAME_CTL_ILLLEN_ERR | \
+ AR5K_PHY_FRAME_CTL_ILLRATE_ERR | \
+ AR5K_PHY_FRAME_CTL_PARITY_ERR | \
+ AR5K_PHY_FRAME_CTL_TIMING_ERR)
+
+/*
+ * PHY Tx Power adjustment register [5212A+]
+ */
+#define AR5K_PHY_TX_PWR_ADJ 0x994c
+#define AR5K_PHY_TX_PWR_ADJ_CCK_GAIN_DELTA 0x00000fc0
+#define AR5K_PHY_TX_PWR_ADJ_CCK_GAIN_DELTA_S 6
+#define AR5K_PHY_TX_PWR_ADJ_CCK_PCDAC_INDEX 0x00fc0000
+#define AR5K_PHY_TX_PWR_ADJ_CCK_PCDAC_INDEX_S 18
+
+/*
+ * PHY radar detection register [5111+]
+ */
+#define AR5K_PHY_RADAR 0x9954
+#define AR5K_PHY_RADAR_ENABLE 0x00000001
+#define AR5K_PHY_RADAR_DISABLE 0x00000000
+#define AR5K_PHY_RADAR_INBANDTHR 0x0000003e /* Inband threshold
+ 5-bits, units unknown {0..31}
+ (? MHz ?) */
+#define AR5K_PHY_RADAR_INBANDTHR_S 1
+
+#define AR5K_PHY_RADAR_PRSSI_THR 0x00000fc0 /* Pulse RSSI/SNR threshold
+ 6-bits, dBm range {0..63}
+ in dBm units. */
+#define AR5K_PHY_RADAR_PRSSI_THR_S 6
+
+#define AR5K_PHY_RADAR_PHEIGHT_THR 0x0003f000 /* Pulse height threshold
+ 6-bits, dBm range {0..63}
+ in dBm units. */
+#define AR5K_PHY_RADAR_PHEIGHT_THR_S 12
+
+#define AR5K_PHY_RADAR_RSSI_THR 0x00fc0000 /* Radar RSSI/SNR threshold.
+ 6-bits, dBm range {0..63}
+ in dBm units. */
+#define AR5K_PHY_RADAR_RSSI_THR_S 18
+
+#define AR5K_PHY_RADAR_FIRPWR_THR 0x7f000000 /* Finite Impulse Response
+ filter power out threshold.
+ 7-bits, standard power range
+ {0..127} in 1/2 dBm units. */
+#define AR5K_PHY_RADAR_FIRPWR_THRS 24
+
+/*
+ * PHY antenna switch table registers
+ */
+#define AR5K_PHY_ANT_SWITCH_TABLE_0 0x9960
+#define AR5K_PHY_ANT_SWITCH_TABLE_1 0x9964
+
+/*
+ * PHY Noise floor threshold
+ */
+#define AR5K_PHY_NFTHRES 0x9968
+
+/*
+ * Sigma Delta register (?) [5213]
+ */
+#define AR5K_PHY_SIGMA_DELTA 0x996C
+#define AR5K_PHY_SIGMA_DELTA_ADC_SEL 0x00000003
+#define AR5K_PHY_SIGMA_DELTA_ADC_SEL_S 0
+#define AR5K_PHY_SIGMA_DELTA_FILT2 0x000000f8
+#define AR5K_PHY_SIGMA_DELTA_FILT2_S 3
+#define AR5K_PHY_SIGMA_DELTA_FILT1 0x00001f00
+#define AR5K_PHY_SIGMA_DELTA_FILT1_S 8
+#define AR5K_PHY_SIGMA_DELTA_ADC_CLIP 0x01ffe000
+#define AR5K_PHY_SIGMA_DELTA_ADC_CLIP_S 13
+
+/*
+ * RF restart register [5112+] (?)
+ */
+#define AR5K_PHY_RESTART 0x9970 /* restart */
+#define AR5K_PHY_RESTART_DIV_GC 0x001c0000 /* Fast diversity gc_limit (?) */
+#define AR5K_PHY_RESTART_DIV_GC_S 18
+
+/*
+ * RF Bus access request register (for synth-only channel switching)
+ */
+#define AR5K_PHY_RFBUS_REQ 0x997C
+#define AR5K_PHY_RFBUS_REQ_REQUEST 0x00000001
+
+/*
+ * Spur mitigation masks (?)
+ */
+#define AR5K_PHY_TIMING_7 0x9980
+#define AR5K_PHY_TIMING_8 0x9984
+#define AR5K_PHY_TIMING_8_PILOT_MASK_2 0x000fffff
+#define AR5K_PHY_TIMING_8_PILOT_MASK_2_S 0
+
+#define AR5K_PHY_BIN_MASK2_1 0x9988
+#define AR5K_PHY_BIN_MASK2_2 0x998c
+#define AR5K_PHY_BIN_MASK2_3 0x9990
+
+#define AR5K_PHY_BIN_MASK2_4 0x9994
+#define AR5K_PHY_BIN_MASK2_4_MASK_4 0x00003fff
+#define AR5K_PHY_BIN_MASK2_4_MASK_4_S 0
+
+#define AR5K_PHY_TIMING_9 0x9998
+#define AR5K_PHY_TIMING_10 0x999c
+#define AR5K_PHY_TIMING_10_PILOT_MASK_2 0x000fffff
+#define AR5K_PHY_TIMING_10_PILOT_MASK_2_S 0
+
+/*
+ * Spur mitigation control
+ */
+#define AR5K_PHY_TIMING_11 0x99a0 /* Register address */
+#define AR5K_PHY_TIMING_11_SPUR_DELTA_PHASE 0x000fffff /* Spur delta phase */
+#define AR5K_PHY_TIMING_11_SPUR_DELTA_PHASE_S 0
+#define AR5K_PHY_TIMING_11_SPUR_FREQ_SD 0x3ff00000 /* Freq sigma delta */
+#define AR5K_PHY_TIMING_11_SPUR_FREQ_SD_S 20
+#define AR5K_PHY_TIMING_11_USE_SPUR_IN_AGC 0x40000000 /* Spur filter in AGC detector */
+#define AR5K_PHY_TIMING_11_USE_SPUR_IN_SELFCOR 0x80000000 /* Spur filter in OFDM self correlator */
+
+/*
+ * Gain tables
+ */
+#define AR5K_BB_GAIN_BASE 0x9b00 /* BaseBand Amplifier Gain table base address */
+#define AR5K_BB_GAIN(_n) (AR5K_BB_GAIN_BASE + ((_n) << 2))
+#define AR5K_RF_GAIN_BASE 0x9a00 /* RF Amplifier Gain table base address */
+#define AR5K_RF_GAIN(_n) (AR5K_RF_GAIN_BASE + ((_n) << 2))
+
+/*
+ * PHY timing IQ calibration result register [5111+]
+ */
+#define AR5K_PHY_IQRES_CAL_PWR_I 0x9c10 /* I (Inphase) power value */
+#define AR5K_PHY_IQRES_CAL_PWR_Q 0x9c14 /* Q (Quadrature) power value */
+#define AR5K_PHY_IQRES_CAL_CORR 0x9c18 /* I/Q Correlation */
+
+/*
+ * PHY current RSSI register [5111+]
+ */
+#define AR5K_PHY_CURRENT_RSSI 0x9c1c
+
+/*
+ * PHY RF Bus grant register
+ */
+#define AR5K_PHY_RFBUS_GRANT 0x9c20
+#define AR5K_PHY_RFBUS_GRANT_OK 0x00000001
+
+/*
+ * PHY ADC test register
+ */
+#define AR5K_PHY_ADC_TEST 0x9c24
+#define AR5K_PHY_ADC_TEST_I 0x00000001
+#define AR5K_PHY_ADC_TEST_Q 0x00000200
+
+/*
+ * PHY DAC test register
+ */
+#define AR5K_PHY_DAC_TEST 0x9c28
+#define AR5K_PHY_DAC_TEST_I 0x00000001
+#define AR5K_PHY_DAC_TEST_Q 0x00000200
+
+/*
+ * PHY PTAT register (?)
+ */
+#define AR5K_PHY_PTAT 0x9c2c
+
+/*
+ * PHY Illegal TX rate register [5112+]
+ */
+#define AR5K_PHY_BAD_TX_RATE 0x9c30
+
+/*
+ * PHY SPUR Power register [5112+]
+ */
+#define AR5K_PHY_SPUR_PWR 0x9c34 /* Register Address */
+#define AR5K_PHY_SPUR_PWR_I 0x00000001 /* SPUR Power estimate for I (field) */
+#define AR5K_PHY_SPUR_PWR_Q 0x00000100 /* SPUR Power estimate for Q (field) */
+#define AR5K_PHY_SPUR_PWR_FILT 0x00010000 /* Power with SPUR removed (field) */
+
+/*
+ * PHY Channel status register [5112+] (?)
+ */
+#define AR5K_PHY_CHAN_STATUS 0x9c38
+#define AR5K_PHY_CHAN_STATUS_BT_ACT 0x00000001
+#define AR5K_PHY_CHAN_STATUS_RX_CLR_RAW 0x00000002
+#define AR5K_PHY_CHAN_STATUS_RX_CLR_MAC 0x00000004
+#define AR5K_PHY_CHAN_STATUS_RX_CLR_PAP 0x00000008
+
+/*
+ * Heavy clip enable register
+ */
+#define AR5K_PHY_HEAVY_CLIP_ENABLE 0x99e0
+
+/*
+ * PHY clock sleep registers [5112+]
+ */
+#define AR5K_PHY_SCLOCK 0x99f0
+#define AR5K_PHY_SCLOCK_32MHZ 0x0000000c
+#define AR5K_PHY_SDELAY 0x99f4
+#define AR5K_PHY_SDELAY_32MHZ 0x000000ff
+#define AR5K_PHY_SPENDING 0x99f8
+
+
+/*
+ * PHY PAPD I (power?) table (?)
+ * (92! entries)
+ */
+#define AR5K_PHY_PAPD_I_BASE 0xa000
+#define AR5K_PHY_PAPD_I(_n) (AR5K_PHY_PAPD_I_BASE + ((_n) << 2))
+
+/*
+ * PHY PCDAC TX power table
+ */
+#define AR5K_PHY_PCDAC_TXPOWER_BASE 0xa180
+#define AR5K_PHY_PCDAC_TXPOWER(_n) (AR5K_PHY_PCDAC_TXPOWER_BASE + ((_n) << 2))
+
+/*
+ * PHY mode register [5111+]
+ */
+#define AR5K_PHY_MODE 0x0a200 /* Register Address */
+#define AR5K_PHY_MODE_MOD 0x00000001 /* PHY Modulation bit */
+#define AR5K_PHY_MODE_MOD_OFDM 0
+#define AR5K_PHY_MODE_MOD_CCK 1
+#define AR5K_PHY_MODE_FREQ 0x00000002 /* Freq mode bit */
+#define AR5K_PHY_MODE_FREQ_5GHZ 0
+#define AR5K_PHY_MODE_FREQ_2GHZ 2
+#define AR5K_PHY_MODE_MOD_DYN 0x00000004 /* Enable Dynamic OFDM/CCK mode [5112+] */
+#define AR5K_PHY_MODE_RAD 0x00000008 /* [5212+] */
+#define AR5K_PHY_MODE_RAD_RF5111 0
+#define AR5K_PHY_MODE_RAD_RF5112 8
+#define AR5K_PHY_MODE_XR 0x00000010 /* Enable XR mode [5112+] */
+#define AR5K_PHY_MODE_HALF_RATE 0x00000020 /* Enable Half rate (test) */
+#define AR5K_PHY_MODE_QUARTER_RATE 0x00000040 /* Enable Quarter rat (test) */
+
+/*
+ * PHY CCK transmit control register [5111+ (?)]
+ */
+#define AR5K_PHY_CCKTXCTL 0xa204
+#define AR5K_PHY_CCKTXCTL_WORLD 0x00000000
+#define AR5K_PHY_CCKTXCTL_JAPAN 0x00000010
+#define AR5K_PHY_CCKTXCTL_SCRAMBLER_DIS 0x00000001
+#define AR5K_PHY_CCKTXCTK_DAC_SCALE 0x00000004
+
+/*
+ * PHY CCK Cross-correlator Barker RSSI threshold register [5212+]
+ */
+#define AR5K_PHY_CCK_CROSSCORR 0xa208
+#define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR 0x0000003f
+#define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR_S 0
+
+/* Same address is used for antenna diversity activation */
+#define AR5K_PHY_FAST_ANT_DIV 0xa208
+#define AR5K_PHY_FAST_ANT_DIV_EN 0x00002000
+
+/*
+ * PHY 2GHz gain register [5111+]
+ */
+#define AR5K_PHY_GAIN_2GHZ 0xa20c
+#define AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX 0x00fc0000
+#define AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX_S 18
+#define AR5K_PHY_GAIN_2GHZ_INI_5111 0x6480416c
+
+#define AR5K_PHY_CCK_RX_CTL_4 0xa21c
+#define AR5K_PHY_CCK_RX_CTL_4_FREQ_EST_SHORT 0x01f80000
+#define AR5K_PHY_CCK_RX_CTL_4_FREQ_EST_SHORT_S 19
+
+#define AR5K_PHY_DAG_CCK_CTL 0xa228
+#define AR5K_PHY_DAG_CCK_CTL_EN_RSSI_THR 0x00000200
+#define AR5K_PHY_DAG_CCK_CTL_RSSI_THR 0x0001fc00
+#define AR5K_PHY_DAG_CCK_CTL_RSSI_THR_S 10
+
+#define AR5K_PHY_FAST_ADC 0xa24c
+
+#define AR5K_PHY_BLUETOOTH 0xa254
+
+/*
+ * Transmit Power Control register
+ * [2413+]
+ */
+#define AR5K_PHY_TPC_RG1 0xa258
+#define AR5K_PHY_TPC_RG1_NUM_PD_GAIN 0x0000c000
+#define AR5K_PHY_TPC_RG1_NUM_PD_GAIN_S 14
+#define AR5K_PHY_TPC_RG1_PDGAIN_1 0x00030000
+#define AR5K_PHY_TPC_RG1_PDGAIN_1_S 16
+#define AR5K_PHY_TPC_RG1_PDGAIN_2 0x000c0000
+#define AR5K_PHY_TPC_RG1_PDGAIN_2_S 18
+#define AR5K_PHY_TPC_RG1_PDGAIN_3 0x00300000
+#define AR5K_PHY_TPC_RG1_PDGAIN_3_S 20
+
+#define AR5K_PHY_TPC_RG5 0xa26C
+#define AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP 0x0000000F
+#define AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP_S 0
+#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_1 0x000003F0
+#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_1_S 4
+#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_2 0x0000FC00
+#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_2_S 10
+#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_3 0x003F0000
+#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_3_S 16
+#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_4 0x0FC00000
+#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_4_S 22
+
+/*
+ * PHY PDADC Tx power table
+ */
+#define AR5K_PHY_PDADC_TXPOWER_BASE 0xa280
+#define AR5K_PHY_PDADC_TXPOWER(_n) (AR5K_PHY_PDADC_TXPOWER_BASE + ((_n) << 2))
+
+/*
+ * Platform registers for WiSoC
+ */
+#define AR5K_AR5312_RESET 0xbc003020
+#define AR5K_AR5312_RESET_BB0_COLD 0x00000004
+#define AR5K_AR5312_RESET_BB1_COLD 0x00000200
+#define AR5K_AR5312_RESET_WMAC0 0x00002000
+#define AR5K_AR5312_RESET_BB0_WARM 0x00004000
+#define AR5K_AR5312_RESET_WMAC1 0x00020000
+#define AR5K_AR5312_RESET_BB1_WARM 0x00040000
+
+#define AR5K_AR5312_ENABLE 0xbc003080
+#define AR5K_AR5312_ENABLE_WLAN0 0x00000001
+#define AR5K_AR5312_ENABLE_WLAN1 0x00000008
+
+#define AR5K_AR2315_RESET 0xb1000004
+#define AR5K_AR2315_RESET_WMAC 0x00000001
+#define AR5K_AR2315_RESET_BB_WARM 0x00000002
+
+#define AR5K_AR2315_AHB_ARB_CTL 0xb1000008
+#define AR5K_AR2315_AHB_ARB_CTL_WLAN 0x00000002
+
+#define AR5K_AR2315_BYTESWAP 0xb100000c
+#define AR5K_AR2315_BYTESWAP_WMAC 0x00000002
diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c
new file mode 100644
index 000000000..9fdb5283b
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/reset.c
@@ -0,0 +1,1380 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ * Copyright (c) 2007-2008 Luis Rodriguez <mcgrof@winlab.rutgers.edu>
+ * Copyright (c) 2007-2008 Pavel Roskin <proski@gnu.org>
+ * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/****************************\
+ Reset function and helpers
+\****************************/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <asm/unaligned.h>
+
+#include <linux/pci.h> /* To determine if a card is pci-e */
+#include <linux/log2.h>
+#include <linux/platform_device.h>
+#include "ath5k.h"
+#include "reg.h"
+#include "debug.h"
+
+
+/**
+ * DOC: Reset function and helpers
+ *
+ * Here we implement the main reset routine, used to bring the card
+ * to a working state and ready to receive. We also handle routines
+ * that don't fit on other places such as clock, sleep and power control
+ */
+
+
+/******************\
+* Helper functions *
+\******************/
+
+/**
+ * ath5k_hw_register_timeout() - Poll a register for a flag/field change
+ * @ah: The &struct ath5k_hw
+ * @reg: The register to read
+ * @flag: The flag/field to check on the register
+ * @val: The field value we expect (if we check a field)
+ * @is_set: Instead of checking if the flag got cleared, check if it got set
+ *
+ * Some registers contain flags that indicate that an operation is
+ * running. We use this function to poll these registers and check
+ * if these flags get cleared. We also use it to poll a register
+ * field (containing multiple flags) until it gets a specific value.
+ *
+ * Returns -EAGAIN if we exceeded AR5K_TUNE_REGISTER_TIMEOUT * 15us or 0
+ */
+int
+ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val,
+ bool is_set)
+{
+ int i;
+ u32 data;
+
+ for (i = AR5K_TUNE_REGISTER_TIMEOUT; i > 0; i--) {
+ data = ath5k_hw_reg_read(ah, reg);
+ if (is_set && (data & flag))
+ break;
+ else if ((data & flag) == val)
+ break;
+ udelay(15);
+ }
+
+ return (i <= 0) ? -EAGAIN : 0;
+}
+
+
+/*************************\
+* Clock related functions *
+\*************************/
+
+/**
+ * ath5k_hw_htoclock() - Translate usec to hw clock units
+ * @ah: The &struct ath5k_hw
+ * @usec: value in microseconds
+ *
+ * Translate usecs to hw clock units based on the current
+ * hw clock rate.
+ *
+ * Returns number of clock units
+ */
+unsigned int
+ath5k_hw_htoclock(struct ath5k_hw *ah, unsigned int usec)
+{
+ struct ath_common *common = ath5k_hw_common(ah);
+ return usec * common->clockrate;
+}
+
+/**
+ * ath5k_hw_clocktoh() - Translate hw clock units to usec
+ * @ah: The &struct ath5k_hw
+ * @clock: value in hw clock units
+ *
+ * Translate hw clock units to usecs based on the current
+ * hw clock rate.
+ *
+ * Returns number of usecs
+ */
+unsigned int
+ath5k_hw_clocktoh(struct ath5k_hw *ah, unsigned int clock)
+{
+ struct ath_common *common = ath5k_hw_common(ah);
+ return clock / common->clockrate;
+}
+
+/**
+ * ath5k_hw_init_core_clock() - Initialize core clock
+ * @ah: The &struct ath5k_hw
+ *
+ * Initialize core clock parameters (usec, usec32, latencies etc),
+ * based on current bwmode and chipset properties.
+ */
+static void
+ath5k_hw_init_core_clock(struct ath5k_hw *ah)
+{
+ struct ieee80211_channel *channel = ah->ah_current_channel;
+ struct ath_common *common = ath5k_hw_common(ah);
+ u32 usec_reg, txlat, rxlat, usec, clock, sclock, txf2txs;
+
+ /*
+ * Set core clock frequency
+ */
+ switch (channel->hw_value) {
+ case AR5K_MODE_11A:
+ clock = 40;
+ break;
+ case AR5K_MODE_11B:
+ clock = 22;
+ break;
+ case AR5K_MODE_11G:
+ default:
+ clock = 44;
+ break;
+ }
+
+ /* Use clock multiplier for non-default
+ * bwmode */
+ switch (ah->ah_bwmode) {
+ case AR5K_BWMODE_40MHZ:
+ clock *= 2;
+ break;
+ case AR5K_BWMODE_10MHZ:
+ clock /= 2;
+ break;
+ case AR5K_BWMODE_5MHZ:
+ clock /= 4;
+ break;
+ default:
+ break;
+ }
+
+ common->clockrate = clock;
+
+ /*
+ * Set USEC parameters
+ */
+ /* Set USEC counter on PCU*/
+ usec = clock - 1;
+ usec = AR5K_REG_SM(usec, AR5K_USEC_1);
+
+ /* Set usec duration on DCU */
+ if (ah->ah_version != AR5K_AR5210)
+ AR5K_REG_WRITE_BITS(ah, AR5K_DCU_GBL_IFS_MISC,
+ AR5K_DCU_GBL_IFS_MISC_USEC_DUR,
+ clock);
+
+ /* Set 32MHz USEC counter */
+ if ((ah->ah_radio == AR5K_RF5112) ||
+ (ah->ah_radio == AR5K_RF2413) ||
+ (ah->ah_radio == AR5K_RF5413) ||
+ (ah->ah_radio == AR5K_RF2316) ||
+ (ah->ah_radio == AR5K_RF2317))
+ /* Remain on 40MHz clock ? */
+ sclock = 40 - 1;
+ else
+ sclock = 32 - 1;
+ sclock = AR5K_REG_SM(sclock, AR5K_USEC_32);
+
+ /*
+ * Set tx/rx latencies
+ */
+ usec_reg = ath5k_hw_reg_read(ah, AR5K_USEC_5211);
+ txlat = AR5K_REG_MS(usec_reg, AR5K_USEC_TX_LATENCY_5211);
+ rxlat = AR5K_REG_MS(usec_reg, AR5K_USEC_RX_LATENCY_5211);
+
+ /*
+ * Set default Tx frame to Tx data start delay
+ */
+ txf2txs = AR5K_INIT_TXF2TXD_START_DEFAULT;
+
+ /*
+ * 5210 initvals don't include usec settings
+ * so we need to use magic values here for
+ * tx/rx latencies
+ */
+ if (ah->ah_version == AR5K_AR5210) {
+ /* same for turbo */
+ txlat = AR5K_INIT_TX_LATENCY_5210;
+ rxlat = AR5K_INIT_RX_LATENCY_5210;
+ }
+
+ if (ah->ah_mac_srev < AR5K_SREV_AR5211) {
+ /* 5311 has different tx/rx latency masks
+ * from 5211, since we deal 5311 the same
+ * as 5211 when setting initvals, shift
+ * values here to their proper locations
+ *
+ * Note: Initvals indicate tx/rx/ latencies
+ * are the same for turbo mode */
+ txlat = AR5K_REG_SM(txlat, AR5K_USEC_TX_LATENCY_5210);
+ rxlat = AR5K_REG_SM(rxlat, AR5K_USEC_RX_LATENCY_5210);
+ } else
+ switch (ah->ah_bwmode) {
+ case AR5K_BWMODE_10MHZ:
+ txlat = AR5K_REG_SM(txlat * 2,
+ AR5K_USEC_TX_LATENCY_5211);
+ rxlat = AR5K_REG_SM(AR5K_INIT_RX_LAT_MAX,
+ AR5K_USEC_RX_LATENCY_5211);
+ txf2txs = AR5K_INIT_TXF2TXD_START_DELAY_10MHZ;
+ break;
+ case AR5K_BWMODE_5MHZ:
+ txlat = AR5K_REG_SM(txlat * 4,
+ AR5K_USEC_TX_LATENCY_5211);
+ rxlat = AR5K_REG_SM(AR5K_INIT_RX_LAT_MAX,
+ AR5K_USEC_RX_LATENCY_5211);
+ txf2txs = AR5K_INIT_TXF2TXD_START_DELAY_5MHZ;
+ break;
+ case AR5K_BWMODE_40MHZ:
+ txlat = AR5K_INIT_TX_LAT_MIN;
+ rxlat = AR5K_REG_SM(rxlat / 2,
+ AR5K_USEC_RX_LATENCY_5211);
+ txf2txs = AR5K_INIT_TXF2TXD_START_DEFAULT;
+ break;
+ default:
+ break;
+ }
+
+ usec_reg = (usec | sclock | txlat | rxlat);
+ ath5k_hw_reg_write(ah, usec_reg, AR5K_USEC);
+
+ /* On 5112 set tx frame to tx data start delay */
+ if (ah->ah_radio == AR5K_RF5112) {
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_RF_CTL2,
+ AR5K_PHY_RF_CTL2_TXF2TXD_START,
+ txf2txs);
+ }
+}
+
+/**
+ * ath5k_hw_set_sleep_clock() - Setup sleep clock operation
+ * @ah: The &struct ath5k_hw
+ * @enable: Enable sleep clock operation (false to disable)
+ *
+ * If there is an external 32KHz crystal available, use it
+ * as ref. clock instead of 32/40MHz clock and baseband clocks
+ * to save power during sleep or restore normal 32/40MHz
+ * operation.
+ *
+ * NOTE: When operating on 32KHz certain PHY registers (27 - 31,
+ * 123 - 127) require delay on access.
+ */
+static void
+ath5k_hw_set_sleep_clock(struct ath5k_hw *ah, bool enable)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ u32 scal, spending, sclock;
+
+ /* Only set 32KHz settings if we have an external
+ * 32KHz crystal present */
+ if ((AR5K_EEPROM_HAS32KHZCRYSTAL(ee->ee_misc1) ||
+ AR5K_EEPROM_HAS32KHZCRYSTAL_OLD(ee->ee_misc1)) &&
+ enable) {
+
+ /* 1 usec/cycle */
+ AR5K_REG_WRITE_BITS(ah, AR5K_USEC_5211, AR5K_USEC_32, 1);
+ /* Set up tsf increment on each cycle */
+ AR5K_REG_WRITE_BITS(ah, AR5K_TSF_PARM, AR5K_TSF_PARM_INC, 61);
+
+ /* Set baseband sleep control registers
+ * and sleep control rate */
+ ath5k_hw_reg_write(ah, 0x1f, AR5K_PHY_SCR);
+
+ if ((ah->ah_radio == AR5K_RF5112) ||
+ (ah->ah_radio == AR5K_RF5413) ||
+ (ah->ah_radio == AR5K_RF2316) ||
+ (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4)))
+ spending = 0x14;
+ else
+ spending = 0x18;
+ ath5k_hw_reg_write(ah, spending, AR5K_PHY_SPENDING);
+
+ if ((ah->ah_radio == AR5K_RF5112) ||
+ (ah->ah_radio == AR5K_RF5413) ||
+ (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) {
+ ath5k_hw_reg_write(ah, 0x26, AR5K_PHY_SLMT);
+ ath5k_hw_reg_write(ah, 0x0d, AR5K_PHY_SCAL);
+ ath5k_hw_reg_write(ah, 0x07, AR5K_PHY_SCLOCK);
+ ath5k_hw_reg_write(ah, 0x3f, AR5K_PHY_SDELAY);
+ AR5K_REG_WRITE_BITS(ah, AR5K_PCICFG,
+ AR5K_PCICFG_SLEEP_CLOCK_RATE, 0x02);
+ } else {
+ ath5k_hw_reg_write(ah, 0x0a, AR5K_PHY_SLMT);
+ ath5k_hw_reg_write(ah, 0x0c, AR5K_PHY_SCAL);
+ ath5k_hw_reg_write(ah, 0x03, AR5K_PHY_SCLOCK);
+ ath5k_hw_reg_write(ah, 0x20, AR5K_PHY_SDELAY);
+ AR5K_REG_WRITE_BITS(ah, AR5K_PCICFG,
+ AR5K_PCICFG_SLEEP_CLOCK_RATE, 0x03);
+ }
+
+ /* Enable sleep clock operation */
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG,
+ AR5K_PCICFG_SLEEP_CLOCK_EN);
+
+ } else {
+
+ /* Disable sleep clock operation and
+ * restore default parameters */
+ AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG,
+ AR5K_PCICFG_SLEEP_CLOCK_EN);
+
+ AR5K_REG_WRITE_BITS(ah, AR5K_PCICFG,
+ AR5K_PCICFG_SLEEP_CLOCK_RATE, 0);
+
+ /* Set DAC/ADC delays */
+ ath5k_hw_reg_write(ah, 0x1f, AR5K_PHY_SCR);
+ ath5k_hw_reg_write(ah, AR5K_PHY_SLMT_32MHZ, AR5K_PHY_SLMT);
+
+ if (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))
+ scal = AR5K_PHY_SCAL_32MHZ_2417;
+ else if (ee->ee_is_hb63)
+ scal = AR5K_PHY_SCAL_32MHZ_HB63;
+ else
+ scal = AR5K_PHY_SCAL_32MHZ;
+ ath5k_hw_reg_write(ah, scal, AR5K_PHY_SCAL);
+
+ ath5k_hw_reg_write(ah, AR5K_PHY_SCLOCK_32MHZ, AR5K_PHY_SCLOCK);
+ ath5k_hw_reg_write(ah, AR5K_PHY_SDELAY_32MHZ, AR5K_PHY_SDELAY);
+
+ if ((ah->ah_radio == AR5K_RF5112) ||
+ (ah->ah_radio == AR5K_RF5413) ||
+ (ah->ah_radio == AR5K_RF2316) ||
+ (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4)))
+ spending = 0x14;
+ else
+ spending = 0x18;
+ ath5k_hw_reg_write(ah, spending, AR5K_PHY_SPENDING);
+
+ /* Set up tsf increment on each cycle */
+ AR5K_REG_WRITE_BITS(ah, AR5K_TSF_PARM, AR5K_TSF_PARM_INC, 1);
+
+ if ((ah->ah_radio == AR5K_RF5112) ||
+ (ah->ah_radio == AR5K_RF5413) ||
+ (ah->ah_radio == AR5K_RF2316) ||
+ (ah->ah_radio == AR5K_RF2317))
+ sclock = 40 - 1;
+ else
+ sclock = 32 - 1;
+ AR5K_REG_WRITE_BITS(ah, AR5K_USEC_5211, AR5K_USEC_32, sclock);
+ }
+}
+
+
+/*********************\
+* Reset/Sleep control *
+\*********************/
+
+/**
+ * ath5k_hw_nic_reset() - Reset the various chipset units
+ * @ah: The &struct ath5k_hw
+ * @val: Mask to indicate what units to reset
+ *
+ * To reset the various chipset units we need to write
+ * the mask to AR5K_RESET_CTL and poll the register until
+ * all flags are cleared.
+ *
+ * Returns 0 if we are O.K. or -EAGAIN (from athk5_hw_register_timeout)
+ */
+static int
+ath5k_hw_nic_reset(struct ath5k_hw *ah, u32 val)
+{
+ int ret;
+ u32 mask = val ? val : ~0U;
+
+ /* Read-and-clear RX Descriptor Pointer*/
+ ath5k_hw_reg_read(ah, AR5K_RXDP);
+
+ /*
+ * Reset the device and wait until success
+ */
+ ath5k_hw_reg_write(ah, val, AR5K_RESET_CTL);
+
+ /* Wait at least 128 PCI clocks */
+ usleep_range(15, 20);
+
+ if (ah->ah_version == AR5K_AR5210) {
+ val &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_DMA
+ | AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_PHY;
+ mask &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_DMA
+ | AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_PHY;
+ } else {
+ val &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND;
+ mask &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND;
+ }
+
+ ret = ath5k_hw_register_timeout(ah, AR5K_RESET_CTL, mask, val, false);
+
+ /*
+ * Reset configuration register (for hw byte-swap). Note that this
+ * is only set for big endian. We do the necessary magic in
+ * AR5K_INIT_CFG.
+ */
+ if ((val & AR5K_RESET_CTL_PCU) == 0)
+ ath5k_hw_reg_write(ah, AR5K_INIT_CFG, AR5K_CFG);
+
+ return ret;
+}
+
+/**
+ * ath5k_hw_wisoc_reset() - Reset AHB chipset
+ * @ah: The &struct ath5k_hw
+ * @flags: Mask to indicate what units to reset
+ *
+ * Same as ath5k_hw_nic_reset but for AHB based devices
+ *
+ * Returns 0 if we are O.K. or -EAGAIN (from athk5_hw_register_timeout)
+ */
+static int
+ath5k_hw_wisoc_reset(struct ath5k_hw *ah, u32 flags)
+{
+ u32 mask = flags ? flags : ~0U;
+ u32 __iomem *reg;
+ u32 regval;
+ u32 val = 0;
+
+ /* ah->ah_mac_srev is not available at this point yet */
+ if (ah->devid >= AR5K_SREV_AR2315_R6) {
+ reg = (u32 __iomem *) AR5K_AR2315_RESET;
+ if (mask & AR5K_RESET_CTL_PCU)
+ val |= AR5K_AR2315_RESET_WMAC;
+ if (mask & AR5K_RESET_CTL_BASEBAND)
+ val |= AR5K_AR2315_RESET_BB_WARM;
+ } else {
+ reg = (u32 __iomem *) AR5K_AR5312_RESET;
+ if (to_platform_device(ah->dev)->id == 0) {
+ if (mask & AR5K_RESET_CTL_PCU)
+ val |= AR5K_AR5312_RESET_WMAC0;
+ if (mask & AR5K_RESET_CTL_BASEBAND)
+ val |= AR5K_AR5312_RESET_BB0_COLD |
+ AR5K_AR5312_RESET_BB0_WARM;
+ } else {
+ if (mask & AR5K_RESET_CTL_PCU)
+ val |= AR5K_AR5312_RESET_WMAC1;
+ if (mask & AR5K_RESET_CTL_BASEBAND)
+ val |= AR5K_AR5312_RESET_BB1_COLD |
+ AR5K_AR5312_RESET_BB1_WARM;
+ }
+ }
+
+ /* Put BB/MAC into reset */
+ regval = ioread32(reg);
+ iowrite32(regval | val, reg);
+ regval = ioread32(reg);
+ udelay(100); /* NB: should be atomic */
+
+ /* Bring BB/MAC out of reset */
+ iowrite32(regval & ~val, reg);
+ regval = ioread32(reg);
+
+ /*
+ * Reset configuration register (for hw byte-swap). Note that this
+ * is only set for big endian. We do the necessary magic in
+ * AR5K_INIT_CFG.
+ */
+ if ((flags & AR5K_RESET_CTL_PCU) == 0)
+ ath5k_hw_reg_write(ah, AR5K_INIT_CFG, AR5K_CFG);
+
+ return 0;
+}
+
+/**
+ * ath5k_hw_set_power_mode() - Set power mode
+ * @ah: The &struct ath5k_hw
+ * @mode: One of enum ath5k_power_mode
+ * @set_chip: Set to true to write sleep control register
+ * @sleep_duration: How much time the device is allowed to sleep
+ * when sleep logic is enabled (in 128 microsecond increments).
+ *
+ * This function is used to configure sleep policy and allowed
+ * sleep modes. For more information check out the sleep control
+ * register on reg.h and STA_ID1.
+ *
+ * Returns 0 on success, -EIO if chip didn't wake up or -EINVAL if an invalid
+ * mode is requested.
+ */
+static int
+ath5k_hw_set_power_mode(struct ath5k_hw *ah, enum ath5k_power_mode mode,
+ bool set_chip, u16 sleep_duration)
+{
+ unsigned int i;
+ u32 staid, data;
+
+ staid = ath5k_hw_reg_read(ah, AR5K_STA_ID1);
+
+ switch (mode) {
+ case AR5K_PM_AUTO:
+ staid &= ~AR5K_STA_ID1_DEFAULT_ANTENNA;
+ fallthrough;
+ case AR5K_PM_NETWORK_SLEEP:
+ if (set_chip)
+ ath5k_hw_reg_write(ah,
+ AR5K_SLEEP_CTL_SLE_ALLOW |
+ sleep_duration,
+ AR5K_SLEEP_CTL);
+
+ staid |= AR5K_STA_ID1_PWR_SV;
+ break;
+
+ case AR5K_PM_FULL_SLEEP:
+ if (set_chip)
+ ath5k_hw_reg_write(ah, AR5K_SLEEP_CTL_SLE_SLP,
+ AR5K_SLEEP_CTL);
+
+ staid |= AR5K_STA_ID1_PWR_SV;
+ break;
+
+ case AR5K_PM_AWAKE:
+
+ staid &= ~AR5K_STA_ID1_PWR_SV;
+
+ if (!set_chip)
+ goto commit;
+
+ data = ath5k_hw_reg_read(ah, AR5K_SLEEP_CTL);
+
+ /* If card is down we 'll get 0xffff... so we
+ * need to clean this up before we write the register
+ */
+ if (data & 0xffc00000)
+ data = 0;
+ else
+ /* Preserve sleep duration etc */
+ data = data & ~AR5K_SLEEP_CTL_SLE;
+
+ ath5k_hw_reg_write(ah, data | AR5K_SLEEP_CTL_SLE_WAKE,
+ AR5K_SLEEP_CTL);
+ usleep_range(15, 20);
+
+ for (i = 200; i > 0; i--) {
+ /* Check if the chip did wake up */
+ if ((ath5k_hw_reg_read(ah, AR5K_PCICFG) &
+ AR5K_PCICFG_SPWR_DN) == 0)
+ break;
+
+ /* Wait a bit and retry */
+ usleep_range(50, 75);
+ ath5k_hw_reg_write(ah, data | AR5K_SLEEP_CTL_SLE_WAKE,
+ AR5K_SLEEP_CTL);
+ }
+
+ /* Fail if the chip didn't wake up */
+ if (i == 0)
+ return -EIO;
+
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+commit:
+ ath5k_hw_reg_write(ah, staid, AR5K_STA_ID1);
+
+ return 0;
+}
+
+/**
+ * ath5k_hw_on_hold() - Put device on hold
+ * @ah: The &struct ath5k_hw
+ *
+ * Put MAC and Baseband on warm reset and keep that state
+ * (don't clean sleep control register). After this MAC
+ * and Baseband are disabled and a full reset is needed
+ * to come back. This way we save as much power as possible
+ * without putting the card on full sleep.
+ *
+ * Returns 0 on success or -EIO on error
+ */
+int
+ath5k_hw_on_hold(struct ath5k_hw *ah)
+{
+ struct pci_dev *pdev = ah->pdev;
+ u32 bus_flags;
+ int ret;
+
+ if (ath5k_get_bus_type(ah) == ATH_AHB)
+ return 0;
+
+ /* Make sure device is awake */
+ ret = ath5k_hw_set_power_mode(ah, AR5K_PM_AWAKE, true, 0);
+ if (ret) {
+ ATH5K_ERR(ah, "failed to wakeup the MAC Chip\n");
+ return ret;
+ }
+
+ /*
+ * Put chipset on warm reset...
+ *
+ * Note: putting PCI core on warm reset on PCI-E cards
+ * results card to hang and always return 0xffff... so
+ * we ignore that flag for PCI-E cards. On PCI cards
+ * this flag gets cleared after 64 PCI clocks.
+ */
+ bus_flags = (pdev && pci_is_pcie(pdev)) ? 0 : AR5K_RESET_CTL_PCI;
+
+ if (ah->ah_version == AR5K_AR5210) {
+ ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
+ AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_DMA |
+ AR5K_RESET_CTL_PHY | AR5K_RESET_CTL_PCI);
+ usleep_range(2000, 2500);
+ } else {
+ ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
+ AR5K_RESET_CTL_BASEBAND | bus_flags);
+ }
+
+ if (ret) {
+ ATH5K_ERR(ah, "failed to put device on warm reset\n");
+ return -EIO;
+ }
+
+ /* ...wakeup again!*/
+ ret = ath5k_hw_set_power_mode(ah, AR5K_PM_AWAKE, true, 0);
+ if (ret) {
+ ATH5K_ERR(ah, "failed to put device on hold\n");
+ return ret;
+ }
+
+ return ret;
+}
+
+/**
+ * ath5k_hw_nic_wakeup() - Force card out of sleep
+ * @ah: The &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
+ *
+ * Bring up MAC + PHY Chips and program PLL
+ * NOTE: Channel is NULL for the initial wakeup.
+ *
+ * Returns 0 on success, -EIO on hw failure or -EINVAL for false channel infos
+ */
+int
+ath5k_hw_nic_wakeup(struct ath5k_hw *ah, struct ieee80211_channel *channel)
+{
+ struct pci_dev *pdev = ah->pdev;
+ u32 turbo, mode, clock, bus_flags;
+ int ret;
+
+ turbo = 0;
+ mode = 0;
+ clock = 0;
+
+ if ((ath5k_get_bus_type(ah) != ATH_AHB) || channel) {
+ /* Wakeup the device */
+ ret = ath5k_hw_set_power_mode(ah, AR5K_PM_AWAKE, true, 0);
+ if (ret) {
+ ATH5K_ERR(ah, "failed to wakeup the MAC Chip\n");
+ return ret;
+ }
+ }
+
+ /*
+ * Put chipset on warm reset...
+ *
+ * Note: putting PCI core on warm reset on PCI-E cards
+ * results card to hang and always return 0xffff... so
+ * we ignore that flag for PCI-E cards. On PCI cards
+ * this flag gets cleared after 64 PCI clocks.
+ */
+ bus_flags = (pdev && pci_is_pcie(pdev)) ? 0 : AR5K_RESET_CTL_PCI;
+
+ if (ah->ah_version == AR5K_AR5210) {
+ ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
+ AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_DMA |
+ AR5K_RESET_CTL_PHY | AR5K_RESET_CTL_PCI);
+ usleep_range(2000, 2500);
+ } else {
+ if (ath5k_get_bus_type(ah) == ATH_AHB)
+ ret = ath5k_hw_wisoc_reset(ah, AR5K_RESET_CTL_PCU |
+ AR5K_RESET_CTL_BASEBAND);
+ else
+ ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
+ AR5K_RESET_CTL_BASEBAND | bus_flags);
+ }
+
+ if (ret) {
+ ATH5K_ERR(ah, "failed to reset the MAC Chip\n");
+ return -EIO;
+ }
+
+ /* ...wakeup again!...*/
+ ret = ath5k_hw_set_power_mode(ah, AR5K_PM_AWAKE, true, 0);
+ if (ret) {
+ ATH5K_ERR(ah, "failed to resume the MAC Chip\n");
+ return ret;
+ }
+
+ /* ...reset configuration register on Wisoc ...
+ * ...clear reset control register and pull device out of
+ * warm reset on others */
+ if (ath5k_get_bus_type(ah) == ATH_AHB)
+ ret = ath5k_hw_wisoc_reset(ah, 0);
+ else
+ ret = ath5k_hw_nic_reset(ah, 0);
+
+ if (ret) {
+ ATH5K_ERR(ah, "failed to warm reset the MAC Chip\n");
+ return -EIO;
+ }
+
+ /* On initialization skip PLL programming since we don't have
+ * a channel / mode set yet */
+ if (!channel)
+ return 0;
+
+ if (ah->ah_version != AR5K_AR5210) {
+ /*
+ * Get channel mode flags
+ */
+
+ if (ah->ah_radio >= AR5K_RF5112) {
+ mode = AR5K_PHY_MODE_RAD_RF5112;
+ clock = AR5K_PHY_PLL_RF5112;
+ } else {
+ mode = AR5K_PHY_MODE_RAD_RF5111; /*Zero*/
+ clock = AR5K_PHY_PLL_RF5111; /*Zero*/
+ }
+
+ if (channel->band == NL80211_BAND_2GHZ) {
+ mode |= AR5K_PHY_MODE_FREQ_2GHZ;
+ clock |= AR5K_PHY_PLL_44MHZ;
+
+ if (channel->hw_value == AR5K_MODE_11B) {
+ mode |= AR5K_PHY_MODE_MOD_CCK;
+ } else {
+ /* XXX Dynamic OFDM/CCK is not supported by the
+ * AR5211 so we set MOD_OFDM for plain g (no
+ * CCK headers) operation. We need to test
+ * this, 5211 might support ofdm-only g after
+ * all, there are also initial register values
+ * in the code for g mode (see initvals.c).
+ */
+ if (ah->ah_version == AR5K_AR5211)
+ mode |= AR5K_PHY_MODE_MOD_OFDM;
+ else
+ mode |= AR5K_PHY_MODE_MOD_DYN;
+ }
+ } else if (channel->band == NL80211_BAND_5GHZ) {
+ mode |= (AR5K_PHY_MODE_FREQ_5GHZ |
+ AR5K_PHY_MODE_MOD_OFDM);
+
+ /* Different PLL setting for 5413 */
+ if (ah->ah_radio == AR5K_RF5413)
+ clock = AR5K_PHY_PLL_40MHZ_5413;
+ else
+ clock |= AR5K_PHY_PLL_40MHZ;
+ } else {
+ ATH5K_ERR(ah, "invalid radio frequency mode\n");
+ return -EINVAL;
+ }
+
+ /*XXX: Can bwmode be used with dynamic mode ?
+ * (I don't think it supports 44MHz) */
+ /* On 2425 initvals TURBO_SHORT is not present */
+ if (ah->ah_bwmode == AR5K_BWMODE_40MHZ) {
+ turbo = AR5K_PHY_TURBO_MODE;
+ if (ah->ah_radio != AR5K_RF2425)
+ turbo |= AR5K_PHY_TURBO_SHORT;
+ } else if (ah->ah_bwmode != AR5K_BWMODE_DEFAULT) {
+ if (ah->ah_radio == AR5K_RF5413) {
+ mode |= (ah->ah_bwmode == AR5K_BWMODE_10MHZ) ?
+ AR5K_PHY_MODE_HALF_RATE :
+ AR5K_PHY_MODE_QUARTER_RATE;
+ } else if (ah->ah_version == AR5K_AR5212) {
+ clock |= (ah->ah_bwmode == AR5K_BWMODE_10MHZ) ?
+ AR5K_PHY_PLL_HALF_RATE :
+ AR5K_PHY_PLL_QUARTER_RATE;
+ }
+ }
+
+ } else { /* Reset the device */
+
+ /* ...enable Atheros turbo mode if requested */
+ if (ah->ah_bwmode == AR5K_BWMODE_40MHZ)
+ ath5k_hw_reg_write(ah, AR5K_PHY_TURBO_MODE,
+ AR5K_PHY_TURBO);
+ }
+
+ if (ah->ah_version != AR5K_AR5210) {
+
+ /* ...update PLL if needed */
+ if (ath5k_hw_reg_read(ah, AR5K_PHY_PLL) != clock) {
+ ath5k_hw_reg_write(ah, clock, AR5K_PHY_PLL);
+ usleep_range(300, 350);
+ }
+
+ /* ...set the PHY operating mode */
+ ath5k_hw_reg_write(ah, mode, AR5K_PHY_MODE);
+ ath5k_hw_reg_write(ah, turbo, AR5K_PHY_TURBO);
+ }
+
+ return 0;
+}
+
+
+/**************************************\
+* Post-initvals register modifications *
+\**************************************/
+
+/**
+ * ath5k_hw_tweak_initval_settings() - Tweak initial settings
+ * @ah: The &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
+ *
+ * Some settings are not handled on initvals, e.g. bwmode
+ * settings, some phy settings, workarounds etc that in general
+ * don't fit anywhere else or are too small to introduce a separate
+ * function for each one. So we have this function to handle
+ * them all during reset and complete card's initialization.
+ */
+static void
+ath5k_hw_tweak_initval_settings(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel)
+{
+ if (ah->ah_version == AR5K_AR5212 &&
+ ah->ah_phy_revision >= AR5K_SREV_PHY_5212A) {
+
+ /* Setup ADC control */
+ ath5k_hw_reg_write(ah,
+ (AR5K_REG_SM(2,
+ AR5K_PHY_ADC_CTL_INBUFGAIN_OFF) |
+ AR5K_REG_SM(2,
+ AR5K_PHY_ADC_CTL_INBUFGAIN_ON) |
+ AR5K_PHY_ADC_CTL_PWD_DAC_OFF |
+ AR5K_PHY_ADC_CTL_PWD_ADC_OFF),
+ AR5K_PHY_ADC_CTL);
+
+
+
+ /* Disable barker RSSI threshold */
+ AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_DAG_CCK_CTL,
+ AR5K_PHY_DAG_CCK_CTL_EN_RSSI_THR);
+
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DAG_CCK_CTL,
+ AR5K_PHY_DAG_CCK_CTL_RSSI_THR, 2);
+
+ /* Set the mute mask */
+ ath5k_hw_reg_write(ah, 0x0000000f, AR5K_SEQ_MASK);
+ }
+
+ /* Clear PHY_BLUETOOTH to allow RX_CLEAR line debug */
+ if (ah->ah_phy_revision >= AR5K_SREV_PHY_5212B)
+ ath5k_hw_reg_write(ah, 0, AR5K_PHY_BLUETOOTH);
+
+ /* Enable DCU double buffering */
+ if (ah->ah_phy_revision > AR5K_SREV_PHY_5212B)
+ AR5K_REG_DISABLE_BITS(ah, AR5K_TXCFG,
+ AR5K_TXCFG_DCU_DBL_BUF_DIS);
+
+ /* Set fast ADC */
+ if ((ah->ah_radio == AR5K_RF5413) ||
+ (ah->ah_radio == AR5K_RF2317) ||
+ (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) {
+ u32 fast_adc = true;
+
+ if (channel->center_freq == 2462 ||
+ channel->center_freq == 2467)
+ fast_adc = 0;
+
+ /* Only update if needed */
+ if (ath5k_hw_reg_read(ah, AR5K_PHY_FAST_ADC) != fast_adc)
+ ath5k_hw_reg_write(ah, fast_adc,
+ AR5K_PHY_FAST_ADC);
+ }
+
+ /* Fix for first revision of the RF5112 RF chipset */
+ if (ah->ah_radio == AR5K_RF5112 &&
+ ah->ah_radio_5ghz_revision <
+ AR5K_SREV_RAD_5112A) {
+ u32 data;
+ ath5k_hw_reg_write(ah, AR5K_PHY_CCKTXCTL_WORLD,
+ AR5K_PHY_CCKTXCTL);
+ if (channel->band == NL80211_BAND_5GHZ)
+ data = 0xffb81020;
+ else
+ data = 0xffb80d20;
+ ath5k_hw_reg_write(ah, data, AR5K_PHY_FRAME_CTL);
+ }
+
+ if (ah->ah_mac_srev < AR5K_SREV_AR5211) {
+ /* Clear QCU/DCU clock gating register */
+ ath5k_hw_reg_write(ah, 0, AR5K_QCUDCU_CLKGT);
+ /* Set DAC/ADC delays */
+ ath5k_hw_reg_write(ah, AR5K_PHY_SCAL_32MHZ_5311,
+ AR5K_PHY_SCAL);
+ /* Enable PCU FIFO corruption ECO */
+ AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW_5211,
+ AR5K_DIAG_SW_ECO_ENABLE);
+ }
+
+ if (ah->ah_bwmode) {
+ /* Increase PHY switch and AGC settling time
+ * on turbo mode (ath5k_hw_commit_eeprom_settings
+ * will override settling time if available) */
+ if (ah->ah_bwmode == AR5K_BWMODE_40MHZ) {
+
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SETTLING,
+ AR5K_PHY_SETTLING_AGC,
+ AR5K_AGC_SETTLING_TURBO);
+
+ /* XXX: Initvals indicate we only increase
+ * switch time on AR5212, 5211 and 5210
+ * only change agc time (bug?) */
+ if (ah->ah_version == AR5K_AR5212)
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SETTLING,
+ AR5K_PHY_SETTLING_SWITCH,
+ AR5K_SWITCH_SETTLING_TURBO);
+
+ if (ah->ah_version == AR5K_AR5210) {
+ /* Set Frame Control Register */
+ ath5k_hw_reg_write(ah,
+ (AR5K_PHY_FRAME_CTL_INI |
+ AR5K_PHY_TURBO_MODE |
+ AR5K_PHY_TURBO_SHORT | 0x2020),
+ AR5K_PHY_FRAME_CTL_5210);
+ }
+ /* On 5413 PHY force window length for half/quarter rate*/
+ } else if ((ah->ah_mac_srev >= AR5K_SREV_AR5424) &&
+ (ah->ah_mac_srev <= AR5K_SREV_AR5414)) {
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_FRAME_CTL_5211,
+ AR5K_PHY_FRAME_CTL_WIN_LEN,
+ 3);
+ }
+ } else if (ah->ah_version == AR5K_AR5210) {
+ /* Set Frame Control Register for normal operation */
+ ath5k_hw_reg_write(ah, (AR5K_PHY_FRAME_CTL_INI | 0x1020),
+ AR5K_PHY_FRAME_CTL_5210);
+ }
+}
+
+/**
+ * ath5k_hw_commit_eeprom_settings() - Commit settings from EEPROM
+ * @ah: The &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
+ *
+ * Use settings stored on EEPROM to properly initialize the card
+ * based on various infos and per-mode calibration data.
+ */
+static void
+ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ s16 cck_ofdm_pwr_delta;
+ u8 ee_mode;
+
+ /* TODO: Add support for AR5210 EEPROM */
+ if (ah->ah_version == AR5K_AR5210)
+ return;
+
+ ee_mode = ath5k_eeprom_mode_from_channel(ah, channel);
+
+ /* Adjust power delta for channel 14 */
+ if (channel->center_freq == 2484)
+ cck_ofdm_pwr_delta =
+ ((ee->ee_cck_ofdm_power_delta -
+ ee->ee_scaled_cck_delta) * 2) / 10;
+ else
+ cck_ofdm_pwr_delta =
+ (ee->ee_cck_ofdm_power_delta * 2) / 10;
+
+ /* Set CCK to OFDM power delta on tx power
+ * adjustment register */
+ if (ah->ah_phy_revision >= AR5K_SREV_PHY_5212A) {
+ if (channel->hw_value == AR5K_MODE_11G)
+ ath5k_hw_reg_write(ah,
+ AR5K_REG_SM((ee->ee_cck_ofdm_gain_delta * -1),
+ AR5K_PHY_TX_PWR_ADJ_CCK_GAIN_DELTA) |
+ AR5K_REG_SM((cck_ofdm_pwr_delta * -1),
+ AR5K_PHY_TX_PWR_ADJ_CCK_PCDAC_INDEX),
+ AR5K_PHY_TX_PWR_ADJ);
+ else
+ ath5k_hw_reg_write(ah, 0, AR5K_PHY_TX_PWR_ADJ);
+ } else {
+ /* For older revs we scale power on sw during tx power
+ * setup */
+ ah->ah_txpower.txp_cck_ofdm_pwr_delta = cck_ofdm_pwr_delta;
+ ah->ah_txpower.txp_cck_ofdm_gainf_delta =
+ ee->ee_cck_ofdm_gain_delta;
+ }
+
+ /* XXX: necessary here? is called from ath5k_hw_set_antenna_mode()
+ * too */
+ ath5k_hw_set_antenna_switch(ah, ee_mode);
+
+ /* Noise floor threshold */
+ ath5k_hw_reg_write(ah,
+ AR5K_PHY_NF_SVAL(ee->ee_noise_floor_thr[ee_mode]),
+ AR5K_PHY_NFTHRES);
+
+ if ((ah->ah_bwmode == AR5K_BWMODE_40MHZ) &&
+ (ah->ah_ee_version >= AR5K_EEPROM_VERSION_5_0)) {
+ /* Switch settling time (Turbo) */
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SETTLING,
+ AR5K_PHY_SETTLING_SWITCH,
+ ee->ee_switch_settling_turbo[ee_mode]);
+
+ /* Tx/Rx attenuation (Turbo) */
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN,
+ AR5K_PHY_GAIN_TXRX_ATTEN,
+ ee->ee_atn_tx_rx_turbo[ee_mode]);
+
+ /* ADC/PGA desired size (Turbo) */
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DESIRED_SIZE,
+ AR5K_PHY_DESIRED_SIZE_ADC,
+ ee->ee_adc_desired_size_turbo[ee_mode]);
+
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DESIRED_SIZE,
+ AR5K_PHY_DESIRED_SIZE_PGA,
+ ee->ee_pga_desired_size_turbo[ee_mode]);
+
+ /* Tx/Rx margin (Turbo) */
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN_2GHZ,
+ AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX,
+ ee->ee_margin_tx_rx_turbo[ee_mode]);
+
+ } else {
+ /* Switch settling time */
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SETTLING,
+ AR5K_PHY_SETTLING_SWITCH,
+ ee->ee_switch_settling[ee_mode]);
+
+ /* Tx/Rx attenuation */
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN,
+ AR5K_PHY_GAIN_TXRX_ATTEN,
+ ee->ee_atn_tx_rx[ee_mode]);
+
+ /* ADC/PGA desired size */
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DESIRED_SIZE,
+ AR5K_PHY_DESIRED_SIZE_ADC,
+ ee->ee_adc_desired_size[ee_mode]);
+
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DESIRED_SIZE,
+ AR5K_PHY_DESIRED_SIZE_PGA,
+ ee->ee_pga_desired_size[ee_mode]);
+
+ /* Tx/Rx margin */
+ if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1)
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN_2GHZ,
+ AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX,
+ ee->ee_margin_tx_rx[ee_mode]);
+ }
+
+ /* XPA delays */
+ ath5k_hw_reg_write(ah,
+ (ee->ee_tx_end2xpa_disable[ee_mode] << 24) |
+ (ee->ee_tx_end2xpa_disable[ee_mode] << 16) |
+ (ee->ee_tx_frm2xpa_enable[ee_mode] << 8) |
+ (ee->ee_tx_frm2xpa_enable[ee_mode]), AR5K_PHY_RF_CTL4);
+
+ /* XLNA delay */
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_RF_CTL3,
+ AR5K_PHY_RF_CTL3_TXE2XLNA_ON,
+ ee->ee_tx_end2xlna_enable[ee_mode]);
+
+ /* Thresh64 (ANI) */
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_NF,
+ AR5K_PHY_NF_THRESH62,
+ ee->ee_thr_62[ee_mode]);
+
+ /* False detect backoff for channels
+ * that have spur noise. Write the new
+ * cyclic power RSSI threshold. */
+ if (ath5k_hw_chan_has_spur_noise(ah, channel))
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_OFDM_SELFCORR,
+ AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1,
+ AR5K_INIT_CYCRSSI_THR1 +
+ ee->ee_false_detect[ee_mode]);
+ else
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_OFDM_SELFCORR,
+ AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1,
+ AR5K_INIT_CYCRSSI_THR1);
+
+ /* I/Q correction (set enable bit last to match HAL sources) */
+ /* TODO: Per channel i/q infos ? */
+ if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) {
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_Q_I_COFF,
+ ee->ee_i_cal[ee_mode]);
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_Q_Q_COFF,
+ ee->ee_q_cal[ee_mode]);
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_ENABLE);
+ }
+
+ /* Heavy clipping -disable for now */
+ if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_5_1)
+ ath5k_hw_reg_write(ah, 0, AR5K_PHY_HEAVY_CLIP_ENABLE);
+}
+
+
+/*********************\
+* Main reset function *
+\*********************/
+
+/**
+ * ath5k_hw_reset() - The main reset function
+ * @ah: The &struct ath5k_hw
+ * @op_mode: One of enum nl80211_iftype
+ * @channel: The &struct ieee80211_channel
+ * @fast: Enable fast channel switching
+ * @skip_pcu: Skip pcu initialization
+ *
+ * This is the function we call each time we want to (re)initialize the
+ * card and pass new settings to hw. We also call it when hw runs into
+ * trouble to make it come back to a working state.
+ *
+ * Returns 0 on success, -EINVAL on false op_mode or channel infos, or -EIO
+ * on failure.
+ */
+int
+ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
+ struct ieee80211_channel *channel, bool fast, bool skip_pcu)
+{
+ u32 s_seq[10], s_led[3], tsf_up, tsf_lo;
+ u8 mode;
+ int i, ret;
+
+ tsf_up = 0;
+ tsf_lo = 0;
+ mode = 0;
+
+ /*
+ * Sanity check for fast flag
+ * Fast channel change only available
+ * on AR2413/AR5413.
+ */
+ if (fast && (ah->ah_radio != AR5K_RF2413) &&
+ (ah->ah_radio != AR5K_RF5413))
+ fast = false;
+
+ /* Disable sleep clock operation
+ * to avoid register access delay on certain
+ * PHY registers */
+ if (ah->ah_version == AR5K_AR5212)
+ ath5k_hw_set_sleep_clock(ah, false);
+
+ mode = channel->hw_value;
+ switch (mode) {
+ case AR5K_MODE_11A:
+ break;
+ case AR5K_MODE_11G:
+ if (ah->ah_version <= AR5K_AR5211) {
+ ATH5K_ERR(ah,
+ "G mode not available on 5210/5211");
+ return -EINVAL;
+ }
+ break;
+ case AR5K_MODE_11B:
+ if (ah->ah_version < AR5K_AR5211) {
+ ATH5K_ERR(ah,
+ "B mode not available on 5210");
+ return -EINVAL;
+ }
+ break;
+ default:
+ ATH5K_ERR(ah,
+ "invalid channel: %d\n", channel->center_freq);
+ return -EINVAL;
+ }
+
+ /*
+ * If driver requested fast channel change and DMA has stopped
+ * go on. If it fails continue with a normal reset.
+ */
+ if (fast) {
+ ret = ath5k_hw_phy_init(ah, channel, mode, true);
+ if (ret) {
+ ATH5K_DBG(ah, ATH5K_DEBUG_RESET,
+ "fast chan change failed, falling back to normal reset\n");
+ /* Non fatal, can happen eg.
+ * on mode change */
+ ret = 0;
+ } else {
+ ATH5K_DBG(ah, ATH5K_DEBUG_RESET,
+ "fast chan change successful\n");
+ return 0;
+ }
+ }
+
+ /*
+ * Save some registers before a reset
+ */
+ if (ah->ah_version != AR5K_AR5210) {
+ /*
+ * Save frame sequence count
+ * For revs. after Oahu, only save
+ * seq num for DCU 0 (Global seq num)
+ */
+ if (ah->ah_mac_srev < AR5K_SREV_AR5211) {
+
+ for (i = 0; i < 10; i++)
+ s_seq[i] = ath5k_hw_reg_read(ah,
+ AR5K_QUEUE_DCU_SEQNUM(i));
+
+ } else {
+ s_seq[0] = ath5k_hw_reg_read(ah,
+ AR5K_QUEUE_DCU_SEQNUM(0));
+ }
+
+ /* TSF accelerates on AR5211 during reset
+ * As a workaround save it here and restore
+ * it later so that it's back in time after
+ * reset. This way it'll get re-synced on the
+ * next beacon without breaking ad-hoc.
+ *
+ * On AR5212 TSF is almost preserved across a
+ * reset so it stays back in time anyway and
+ * we don't have to save/restore it.
+ *
+ * XXX: Since this breaks power saving we have
+ * to disable power saving until we receive the
+ * next beacon, so we can resync beacon timers */
+ if (ah->ah_version == AR5K_AR5211) {
+ tsf_up = ath5k_hw_reg_read(ah, AR5K_TSF_U32);
+ tsf_lo = ath5k_hw_reg_read(ah, AR5K_TSF_L32);
+ }
+ }
+
+
+ /*GPIOs*/
+ s_led[0] = ath5k_hw_reg_read(ah, AR5K_PCICFG) &
+ AR5K_PCICFG_LEDSTATE;
+ s_led[1] = ath5k_hw_reg_read(ah, AR5K_GPIOCR);
+ s_led[2] = ath5k_hw_reg_read(ah, AR5K_GPIODO);
+
+
+ /*
+ * Since we are going to write rf buffer
+ * check if we have any pending gain_F
+ * optimization settings
+ */
+ if (ah->ah_version == AR5K_AR5212 &&
+ (ah->ah_radio <= AR5K_RF5112)) {
+ if (!fast && ah->ah_rf_banks != NULL)
+ ath5k_hw_gainf_calibrate(ah);
+ }
+
+ /* Wakeup the device */
+ ret = ath5k_hw_nic_wakeup(ah, channel);
+ if (ret)
+ return ret;
+
+ /* PHY access enable */
+ if (ah->ah_mac_srev >= AR5K_SREV_AR5211)
+ ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0));
+ else
+ ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ | 0x40,
+ AR5K_PHY(0));
+
+ /* Write initial settings */
+ ret = ath5k_hw_write_initvals(ah, mode, skip_pcu);
+ if (ret)
+ return ret;
+
+ /* Initialize core clock settings */
+ ath5k_hw_init_core_clock(ah);
+
+ /*
+ * Tweak initval settings for revised
+ * chipsets and add some more config
+ * bits
+ */
+ ath5k_hw_tweak_initval_settings(ah, channel);
+
+ /* Commit values from EEPROM */
+ ath5k_hw_commit_eeprom_settings(ah, channel);
+
+
+ /*
+ * Restore saved values
+ */
+
+ /* Seqnum, TSF */
+ if (ah->ah_version != AR5K_AR5210) {
+ if (ah->ah_mac_srev < AR5K_SREV_AR5211) {
+ for (i = 0; i < 10; i++)
+ ath5k_hw_reg_write(ah, s_seq[i],
+ AR5K_QUEUE_DCU_SEQNUM(i));
+ } else {
+ ath5k_hw_reg_write(ah, s_seq[0],
+ AR5K_QUEUE_DCU_SEQNUM(0));
+ }
+
+ if (ah->ah_version == AR5K_AR5211) {
+ ath5k_hw_reg_write(ah, tsf_up, AR5K_TSF_U32);
+ ath5k_hw_reg_write(ah, tsf_lo, AR5K_TSF_L32);
+ }
+ }
+
+ /* Ledstate */
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, s_led[0]);
+
+ /* Gpio settings */
+ ath5k_hw_reg_write(ah, s_led[1], AR5K_GPIOCR);
+ ath5k_hw_reg_write(ah, s_led[2], AR5K_GPIODO);
+
+ /*
+ * Initialize PCU
+ */
+ ath5k_hw_pcu_init(ah, op_mode);
+
+ /*
+ * Initialize PHY
+ */
+ ret = ath5k_hw_phy_init(ah, channel, mode, false);
+ if (ret) {
+ ATH5K_ERR(ah,
+ "failed to initialize PHY (%i) !\n", ret);
+ return ret;
+ }
+
+ /*
+ * Configure QCUs/DCUs
+ */
+ ret = ath5k_hw_init_queues(ah);
+ if (ret)
+ return ret;
+
+
+ /*
+ * Initialize DMA/Interrupts
+ */
+ ath5k_hw_dma_init(ah);
+
+
+ /*
+ * Enable 32KHz clock function for AR5212+ chips
+ * Set clocks to 32KHz operation and use an
+ * external 32KHz crystal when sleeping if one
+ * exists.
+ * Disabled by default because it is also disabled in
+ * other drivers and it is known to cause stability
+ * issues on some devices
+ */
+ if (ah->ah_use_32khz_clock && ah->ah_version == AR5K_AR5212 &&
+ op_mode != NL80211_IFTYPE_AP)
+ ath5k_hw_set_sleep_clock(ah, true);
+
+ /*
+ * Disable beacons and reset the TSF
+ */
+ AR5K_REG_DISABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE);
+ ath5k_hw_reset_tsf(ah);
+ return 0;
+}
diff --git a/drivers/net/wireless/ath/ath5k/rfbuffer.h b/drivers/net/wireless/ath/ath5k/rfbuffer.h
new file mode 100644
index 000000000..151935c48
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/rfbuffer.h
@@ -0,0 +1,853 @@
+/*
+ * RF Buffer handling functions
+ *
+ * Copyright (c) 2009 Nick Kossifidis <mickflemm@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+
+/**
+ * DOC: RF Buffer registers
+ *
+ * There are some special registers on the RF chip
+ * that control various operation settings related mostly to
+ * the analog parts (channel, gain adjustment etc).
+ *
+ * We don't write on those registers directly but
+ * we send a data packet on the chip, using a special register,
+ * that holds all the settings we need. After we've sent the
+ * data packet, we write on another special register to notify hw
+ * to apply the settings. This is done so that control registers
+ * can be dynamically programmed during operation and the settings
+ * are applied faster on the hw.
+ *
+ * We call each data packet an "RF Bank" and all the data we write
+ * (all RF Banks) "RF Buffer". This file holds initial RF Buffer
+ * data for the different RF chips, and various info to match RF
+ * Buffer offsets with specific RF registers so that we can access
+ * them. We tweak these settings on rfregs_init function.
+ *
+ * Also check out reg.h and U.S. Patent 6677779 B1 (about buffer
+ * registers and control registers):
+ *
+ * https://www.google.com/patents?id=qNURAAAAEBAJ
+ */
+
+
+/**
+ * struct ath5k_ini_rfbuffer - Initial RF Buffer settings
+ * @rfb_bank: RF Bank number
+ * @rfb_ctrl_register: RF Buffer control register
+ * @rfb_mode_data: RF Buffer data for each mode
+ *
+ * Struct to hold default mode specific RF
+ * register values (RF Banks) for each chip.
+ */
+struct ath5k_ini_rfbuffer {
+ u8 rfb_bank;
+ u16 rfb_ctrl_register;
+ u32 rfb_mode_data[3];
+};
+
+/**
+ * struct ath5k_rfb_field - An RF Buffer field (register/value)
+ * @len: Field length
+ * @pos: Offset on the raw packet
+ * @col: Used for shifting
+ *
+ * Struct to hold RF Buffer field
+ * infos used to access certain RF
+ * analog registers
+ */
+struct ath5k_rfb_field {
+ u8 len;
+ u16 pos;
+ u8 col;
+};
+
+/**
+ * struct ath5k_rf_reg - RF analog register definition
+ * @bank: RF Buffer Bank number
+ * @index: Register's index on ath5k_rf_regx_idx
+ * @field: The &struct ath5k_rfb_field
+ *
+ * We use this struct to define the set of RF registers
+ * on each chip that we want to tweak. Some RF registers
+ * are common between different chip versions so this saves
+ * us space and complexity because we can refer to an rf
+ * register by it's index no matter what chip we work with
+ * as long as it has that register.
+ */
+struct ath5k_rf_reg {
+ u8 bank;
+ u8 index;
+ struct ath5k_rfb_field field;
+};
+
+/**
+ * enum ath5k_rf_regs_idx - Map RF registers to indexes
+ *
+ * We do this to handle common bits and make our
+ * life easier by using an index for each register
+ * instead of a full rfb_field
+ */
+enum ath5k_rf_regs_idx {
+ /* BANK 2 */
+ AR5K_RF_TURBO = 0,
+ /* BANK 6 */
+ AR5K_RF_OB_2GHZ,
+ AR5K_RF_OB_5GHZ,
+ AR5K_RF_DB_2GHZ,
+ AR5K_RF_DB_5GHZ,
+ AR5K_RF_FIXED_BIAS_A,
+ AR5K_RF_FIXED_BIAS_B,
+ AR5K_RF_PWD_XPD,
+ AR5K_RF_XPD_SEL,
+ AR5K_RF_XPD_GAIN,
+ AR5K_RF_PD_GAIN_LO,
+ AR5K_RF_PD_GAIN_HI,
+ AR5K_RF_HIGH_VC_CP,
+ AR5K_RF_MID_VC_CP,
+ AR5K_RF_LOW_VC_CP,
+ AR5K_RF_PUSH_UP,
+ AR5K_RF_PAD2GND,
+ AR5K_RF_XB2_LVL,
+ AR5K_RF_XB5_LVL,
+ AR5K_RF_PWD_ICLOBUF_2G,
+ AR5K_RF_PWD_84,
+ AR5K_RF_PWD_90,
+ AR5K_RF_PWD_130,
+ AR5K_RF_PWD_131,
+ AR5K_RF_PWD_132,
+ AR5K_RF_PWD_136,
+ AR5K_RF_PWD_137,
+ AR5K_RF_PWD_138,
+ AR5K_RF_PWD_166,
+ AR5K_RF_PWD_167,
+ AR5K_RF_DERBY_CHAN_SEL_MODE,
+ /* BANK 7 */
+ AR5K_RF_GAIN_I,
+ AR5K_RF_PLO_SEL,
+ AR5K_RF_RFGAIN_SEL,
+ AR5K_RF_RFGAIN_STEP,
+ AR5K_RF_WAIT_S,
+ AR5K_RF_WAIT_I,
+ AR5K_RF_MAX_TIME,
+ AR5K_RF_MIXVGA_OVR,
+ AR5K_RF_MIXGAIN_OVR,
+ AR5K_RF_MIXGAIN_STEP,
+ AR5K_RF_PD_DELAY_A,
+ AR5K_RF_PD_DELAY_B,
+ AR5K_RF_PD_DELAY_XR,
+ AR5K_RF_PD_PERIOD_A,
+ AR5K_RF_PD_PERIOD_B,
+ AR5K_RF_PD_PERIOD_XR,
+};
+
+
+/*******************\
+* RF5111 (Sombrero) *
+\*******************/
+
+/* BANK 2 len pos col */
+#define AR5K_RF5111_RF_TURBO { 1, 3, 0 }
+
+/* BANK 6 len pos col */
+#define AR5K_RF5111_OB_2GHZ { 3, 119, 0 }
+#define AR5K_RF5111_DB_2GHZ { 3, 122, 0 }
+
+#define AR5K_RF5111_OB_5GHZ { 3, 104, 0 }
+#define AR5K_RF5111_DB_5GHZ { 3, 107, 0 }
+
+#define AR5K_RF5111_PWD_XPD { 1, 95, 0 }
+#define AR5K_RF5111_XPD_GAIN { 4, 96, 0 }
+
+/* Access to PWD registers */
+#define AR5K_RF5111_PWD(_n) { 1, (135 - _n), 3 }
+
+/* BANK 7 len pos col */
+#define AR5K_RF5111_GAIN_I { 6, 29, 0 }
+#define AR5K_RF5111_PLO_SEL { 1, 4, 0 }
+#define AR5K_RF5111_RFGAIN_SEL { 1, 36, 0 }
+#define AR5K_RF5111_RFGAIN_STEP { 6, 37, 0 }
+/* Only on AR5212 BaseBand and up */
+#define AR5K_RF5111_WAIT_S { 5, 19, 0 }
+#define AR5K_RF5111_WAIT_I { 5, 24, 0 }
+#define AR5K_RF5111_MAX_TIME { 2, 49, 0 }
+
+static const struct ath5k_rf_reg rf_regs_5111[] = {
+ {2, AR5K_RF_TURBO, AR5K_RF5111_RF_TURBO},
+ {6, AR5K_RF_OB_2GHZ, AR5K_RF5111_OB_2GHZ},
+ {6, AR5K_RF_DB_2GHZ, AR5K_RF5111_DB_2GHZ},
+ {6, AR5K_RF_OB_5GHZ, AR5K_RF5111_OB_5GHZ},
+ {6, AR5K_RF_DB_5GHZ, AR5K_RF5111_DB_5GHZ},
+ {6, AR5K_RF_PWD_XPD, AR5K_RF5111_PWD_XPD},
+ {6, AR5K_RF_XPD_GAIN, AR5K_RF5111_XPD_GAIN},
+ {6, AR5K_RF_PWD_84, AR5K_RF5111_PWD(84)},
+ {6, AR5K_RF_PWD_90, AR5K_RF5111_PWD(90)},
+ {7, AR5K_RF_GAIN_I, AR5K_RF5111_GAIN_I},
+ {7, AR5K_RF_PLO_SEL, AR5K_RF5111_PLO_SEL},
+ {7, AR5K_RF_RFGAIN_SEL, AR5K_RF5111_RFGAIN_SEL},
+ {7, AR5K_RF_RFGAIN_STEP, AR5K_RF5111_RFGAIN_STEP},
+ {7, AR5K_RF_WAIT_S, AR5K_RF5111_WAIT_S},
+ {7, AR5K_RF_WAIT_I, AR5K_RF5111_WAIT_I},
+ {7, AR5K_RF_MAX_TIME, AR5K_RF5111_MAX_TIME}
+};
+
+/* Default mode specific settings */
+static const struct ath5k_ini_rfbuffer rfb_5111[] = {
+ /* BANK / C.R. A/XR B G */
+ { 0, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 0, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 0, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 0, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 0, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 0, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 0, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 0, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 0, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 0, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 0, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 0, 0x989c, { 0x00380000, 0x00380000, 0x00380000 } },
+ { 0, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 0, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 0, 0x989c, { 0x00000000, 0x000000c0, 0x00000080 } },
+ { 0, 0x989c, { 0x000400f9, 0x000400ff, 0x000400fd } },
+ { 0, 0x98d4, { 0x00000000, 0x00000004, 0x00000004 } },
+ { 1, 0x98d4, { 0x00000020, 0x00000020, 0x00000020 } },
+ { 2, 0x98d4, { 0x00000010, 0x00000010, 0x00000010 } },
+ { 3, 0x98d8, { 0x00601068, 0x00601068, 0x00601068 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x10000000, 0x10000000, 0x10000000 } },
+ { 6, 0x989c, { 0x04000000, 0x04000000, 0x04000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00000000, 0x0a000000, 0x00000000 } },
+ { 6, 0x989c, { 0x003800c0, 0x023800c0, 0x003800c0 } },
+ { 6, 0x989c, { 0x00020006, 0x00000006, 0x00020006 } },
+ { 6, 0x989c, { 0x00000089, 0x00000089, 0x00000089 } },
+ { 6, 0x989c, { 0x000000a0, 0x000000a0, 0x000000a0 } },
+ { 6, 0x989c, { 0x00040007, 0x00040007, 0x00040007 } },
+ { 6, 0x98d4, { 0x0000001a, 0x0000001a, 0x0000001a } },
+ { 7, 0x989c, { 0x00000040, 0x00000040, 0x00000040 } },
+ { 7, 0x989c, { 0x00000010, 0x00000010, 0x00000010 } },
+ { 7, 0x989c, { 0x00000008, 0x00000008, 0x00000008 } },
+ { 7, 0x989c, { 0x0000004f, 0x0000004f, 0x0000004f } },
+ { 7, 0x989c, { 0x000000f1, 0x00000061, 0x000000f1 } },
+ { 7, 0x989c, { 0x0000904f, 0x0000904c, 0x0000904f } },
+ { 7, 0x989c, { 0x0000125a, 0x0000129a, 0x0000125a } },
+ { 7, 0x98cc, { 0x0000000e, 0x0000000f, 0x0000000e } },
+};
+
+
+
+/***********************\
+* RF5112/RF2112 (Derby) *
+\***********************/
+
+/* BANK 2 (Common) len pos col */
+#define AR5K_RF5112X_RF_TURBO { 1, 1, 2 }
+
+/* BANK 7 (Common) len pos col */
+#define AR5K_RF5112X_GAIN_I { 6, 14, 0 }
+#define AR5K_RF5112X_MIXVGA_OVR { 1, 36, 0 }
+#define AR5K_RF5112X_MIXGAIN_OVR { 2, 37, 0 }
+#define AR5K_RF5112X_MIXGAIN_STEP { 4, 32, 0 }
+#define AR5K_RF5112X_PD_DELAY_A { 4, 58, 0 }
+#define AR5K_RF5112X_PD_DELAY_B { 4, 62, 0 }
+#define AR5K_RF5112X_PD_DELAY_XR { 4, 66, 0 }
+#define AR5K_RF5112X_PD_PERIOD_A { 4, 70, 0 }
+#define AR5K_RF5112X_PD_PERIOD_B { 4, 74, 0 }
+#define AR5K_RF5112X_PD_PERIOD_XR { 4, 78, 0 }
+
+/* RFX112 (Derby 1) */
+
+/* BANK 6 len pos col */
+#define AR5K_RF5112_OB_2GHZ { 3, 269, 0 }
+#define AR5K_RF5112_DB_2GHZ { 3, 272, 0 }
+
+#define AR5K_RF5112_OB_5GHZ { 3, 261, 0 }
+#define AR5K_RF5112_DB_5GHZ { 3, 264, 0 }
+
+#define AR5K_RF5112_FIXED_BIAS_A { 1, 260, 0 }
+#define AR5K_RF5112_FIXED_BIAS_B { 1, 259, 0 }
+
+#define AR5K_RF5112_XPD_SEL { 1, 284, 0 }
+#define AR5K_RF5112_XPD_GAIN { 2, 252, 0 }
+
+/* Access to PWD registers */
+#define AR5K_RF5112_PWD(_n) { 1, (302 - _n), 3 }
+
+static const struct ath5k_rf_reg rf_regs_5112[] = {
+ {2, AR5K_RF_TURBO, AR5K_RF5112X_RF_TURBO},
+ {6, AR5K_RF_OB_2GHZ, AR5K_RF5112_OB_2GHZ},
+ {6, AR5K_RF_DB_2GHZ, AR5K_RF5112_DB_2GHZ},
+ {6, AR5K_RF_OB_5GHZ, AR5K_RF5112_OB_5GHZ},
+ {6, AR5K_RF_DB_5GHZ, AR5K_RF5112_DB_5GHZ},
+ {6, AR5K_RF_FIXED_BIAS_A, AR5K_RF5112_FIXED_BIAS_A},
+ {6, AR5K_RF_FIXED_BIAS_B, AR5K_RF5112_FIXED_BIAS_B},
+ {6, AR5K_RF_XPD_SEL, AR5K_RF5112_XPD_SEL},
+ {6, AR5K_RF_XPD_GAIN, AR5K_RF5112_XPD_GAIN},
+ {6, AR5K_RF_PWD_130, AR5K_RF5112_PWD(130)},
+ {6, AR5K_RF_PWD_131, AR5K_RF5112_PWD(131)},
+ {6, AR5K_RF_PWD_132, AR5K_RF5112_PWD(132)},
+ {6, AR5K_RF_PWD_136, AR5K_RF5112_PWD(136)},
+ {6, AR5K_RF_PWD_137, AR5K_RF5112_PWD(137)},
+ {6, AR5K_RF_PWD_138, AR5K_RF5112_PWD(138)},
+ {7, AR5K_RF_GAIN_I, AR5K_RF5112X_GAIN_I},
+ {7, AR5K_RF_MIXVGA_OVR, AR5K_RF5112X_MIXVGA_OVR},
+ {7, AR5K_RF_MIXGAIN_OVR, AR5K_RF5112X_MIXGAIN_OVR},
+ {7, AR5K_RF_MIXGAIN_STEP, AR5K_RF5112X_MIXGAIN_STEP},
+ {7, AR5K_RF_PD_DELAY_A, AR5K_RF5112X_PD_DELAY_A},
+ {7, AR5K_RF_PD_DELAY_B, AR5K_RF5112X_PD_DELAY_B},
+ {7, AR5K_RF_PD_DELAY_XR, AR5K_RF5112X_PD_DELAY_XR},
+ {7, AR5K_RF_PD_PERIOD_A, AR5K_RF5112X_PD_PERIOD_A},
+ {7, AR5K_RF_PD_PERIOD_B, AR5K_RF5112X_PD_PERIOD_B},
+ {7, AR5K_RF_PD_PERIOD_XR, AR5K_RF5112X_PD_PERIOD_XR},
+};
+
+/* Default mode specific settings */
+static const struct ath5k_ini_rfbuffer rfb_5112[] = {
+ /* BANK / C.R. A/XR B G */
+ { 1, 0x98d4, { 0x00000020, 0x00000020, 0x00000020 } },
+ { 2, 0x98d0, { 0x03060408, 0x03060408, 0x03060408 } },
+ { 3, 0x98dc, { 0x00a0c0c0, 0x00e0c0c0, 0x00e0c0c0 } },
+ { 6, 0x989c, { 0x00a00000, 0x00a00000, 0x00a00000 } },
+ { 6, 0x989c, { 0x000a0000, 0x000a0000, 0x000a0000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00660000, 0x00660000, 0x00660000 } },
+ { 6, 0x989c, { 0x00db0000, 0x00db0000, 0x00db0000 } },
+ { 6, 0x989c, { 0x00f10000, 0x00f10000, 0x00f10000 } },
+ { 6, 0x989c, { 0x00120000, 0x00120000, 0x00120000 } },
+ { 6, 0x989c, { 0x00120000, 0x00120000, 0x00120000 } },
+ { 6, 0x989c, { 0x00730000, 0x00730000, 0x00730000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x000c0000, 0x000c0000, 0x000c0000 } },
+ { 6, 0x989c, { 0x00ff0000, 0x00ff0000, 0x00ff0000 } },
+ { 6, 0x989c, { 0x00ff0000, 0x00ff0000, 0x00ff0000 } },
+ { 6, 0x989c, { 0x008b0000, 0x008b0000, 0x008b0000 } },
+ { 6, 0x989c, { 0x00600000, 0x00600000, 0x00600000 } },
+ { 6, 0x989c, { 0x000c0000, 0x000c0000, 0x000c0000 } },
+ { 6, 0x989c, { 0x00840000, 0x00840000, 0x00840000 } },
+ { 6, 0x989c, { 0x00640000, 0x00640000, 0x00640000 } },
+ { 6, 0x989c, { 0x00200000, 0x00200000, 0x00200000 } },
+ { 6, 0x989c, { 0x00240000, 0x00240000, 0x00240000 } },
+ { 6, 0x989c, { 0x00250000, 0x00250000, 0x00250000 } },
+ { 6, 0x989c, { 0x00110000, 0x00110000, 0x00110000 } },
+ { 6, 0x989c, { 0x00110000, 0x00110000, 0x00110000 } },
+ { 6, 0x989c, { 0x00510000, 0x00510000, 0x00510000 } },
+ { 6, 0x989c, { 0x1c040000, 0x1c040000, 0x1c040000 } },
+ { 6, 0x989c, { 0x000a0000, 0x000a0000, 0x000a0000 } },
+ { 6, 0x989c, { 0x00a10000, 0x00a10000, 0x00a10000 } },
+ { 6, 0x989c, { 0x00400000, 0x00400000, 0x00400000 } },
+ { 6, 0x989c, { 0x03090000, 0x03090000, 0x03090000 } },
+ { 6, 0x989c, { 0x06000000, 0x06000000, 0x06000000 } },
+ { 6, 0x989c, { 0x000000b0, 0x000000a8, 0x000000a8 } },
+ { 6, 0x989c, { 0x0000002e, 0x0000002e, 0x0000002e } },
+ { 6, 0x989c, { 0x006c4a41, 0x006c4af1, 0x006c4a61 } },
+ { 6, 0x989c, { 0x0050892a, 0x0050892b, 0x0050892b } },
+ { 6, 0x989c, { 0x00842400, 0x00842400, 0x00842400 } },
+ { 6, 0x989c, { 0x00c69200, 0x00c69200, 0x00c69200 } },
+ { 6, 0x98d0, { 0x0002000c, 0x0002000c, 0x0002000c } },
+ { 7, 0x989c, { 0x00000094, 0x00000094, 0x00000094 } },
+ { 7, 0x989c, { 0x00000091, 0x00000091, 0x00000091 } },
+ { 7, 0x989c, { 0x0000000a, 0x00000012, 0x00000012 } },
+ { 7, 0x989c, { 0x00000080, 0x00000080, 0x00000080 } },
+ { 7, 0x989c, { 0x000000c1, 0x000000c1, 0x000000c1 } },
+ { 7, 0x989c, { 0x00000060, 0x00000060, 0x00000060 } },
+ { 7, 0x989c, { 0x000000f0, 0x000000f0, 0x000000f0 } },
+ { 7, 0x989c, { 0x00000022, 0x00000022, 0x00000022 } },
+ { 7, 0x989c, { 0x00000092, 0x00000092, 0x00000092 } },
+ { 7, 0x989c, { 0x000000d4, 0x000000d4, 0x000000d4 } },
+ { 7, 0x989c, { 0x000014cc, 0x000014cc, 0x000014cc } },
+ { 7, 0x989c, { 0x0000048c, 0x0000048c, 0x0000048c } },
+ { 7, 0x98c4, { 0x00000003, 0x00000003, 0x00000003 } },
+};
+
+/* RFX112A (Derby 2) */
+
+/* BANK 6 len pos col */
+#define AR5K_RF5112A_OB_2GHZ { 3, 287, 0 }
+#define AR5K_RF5112A_DB_2GHZ { 3, 290, 0 }
+
+#define AR5K_RF5112A_OB_5GHZ { 3, 279, 0 }
+#define AR5K_RF5112A_DB_5GHZ { 3, 282, 0 }
+
+#define AR5K_RF5112A_FIXED_BIAS_A { 1, 278, 0 }
+#define AR5K_RF5112A_FIXED_BIAS_B { 1, 277, 0 }
+
+#define AR5K_RF5112A_XPD_SEL { 1, 302, 0 }
+#define AR5K_RF5112A_PDGAINLO { 2, 270, 0 }
+#define AR5K_RF5112A_PDGAINHI { 2, 257, 0 }
+
+/* Access to PWD registers */
+#define AR5K_RF5112A_PWD(_n) { 1, (306 - _n), 3 }
+
+/* Voltage regulators */
+#define AR5K_RF5112A_HIGH_VC_CP { 2, 90, 2 }
+#define AR5K_RF5112A_MID_VC_CP { 2, 92, 2 }
+#define AR5K_RF5112A_LOW_VC_CP { 2, 94, 2 }
+#define AR5K_RF5112A_PUSH_UP { 1, 254, 2 }
+
+/* Power consumption */
+#define AR5K_RF5112A_PAD2GND { 1, 281, 1 }
+#define AR5K_RF5112A_XB2_LVL { 2, 1, 3 }
+#define AR5K_RF5112A_XB5_LVL { 2, 3, 3 }
+
+static const struct ath5k_rf_reg rf_regs_5112a[] = {
+ {2, AR5K_RF_TURBO, AR5K_RF5112X_RF_TURBO},
+ {6, AR5K_RF_OB_2GHZ, AR5K_RF5112A_OB_2GHZ},
+ {6, AR5K_RF_DB_2GHZ, AR5K_RF5112A_DB_2GHZ},
+ {6, AR5K_RF_OB_5GHZ, AR5K_RF5112A_OB_5GHZ},
+ {6, AR5K_RF_DB_5GHZ, AR5K_RF5112A_DB_5GHZ},
+ {6, AR5K_RF_FIXED_BIAS_A, AR5K_RF5112A_FIXED_BIAS_A},
+ {6, AR5K_RF_FIXED_BIAS_B, AR5K_RF5112A_FIXED_BIAS_B},
+ {6, AR5K_RF_XPD_SEL, AR5K_RF5112A_XPD_SEL},
+ {6, AR5K_RF_PD_GAIN_LO, AR5K_RF5112A_PDGAINLO},
+ {6, AR5K_RF_PD_GAIN_HI, AR5K_RF5112A_PDGAINHI},
+ {6, AR5K_RF_PWD_130, AR5K_RF5112A_PWD(130)},
+ {6, AR5K_RF_PWD_131, AR5K_RF5112A_PWD(131)},
+ {6, AR5K_RF_PWD_132, AR5K_RF5112A_PWD(132)},
+ {6, AR5K_RF_PWD_136, AR5K_RF5112A_PWD(136)},
+ {6, AR5K_RF_PWD_137, AR5K_RF5112A_PWD(137)},
+ {6, AR5K_RF_PWD_138, AR5K_RF5112A_PWD(138)},
+ {6, AR5K_RF_PWD_166, AR5K_RF5112A_PWD(166)},
+ {6, AR5K_RF_PWD_167, AR5K_RF5112A_PWD(167)},
+ {6, AR5K_RF_HIGH_VC_CP, AR5K_RF5112A_HIGH_VC_CP},
+ {6, AR5K_RF_MID_VC_CP, AR5K_RF5112A_MID_VC_CP},
+ {6, AR5K_RF_LOW_VC_CP, AR5K_RF5112A_LOW_VC_CP},
+ {6, AR5K_RF_PUSH_UP, AR5K_RF5112A_PUSH_UP},
+ {6, AR5K_RF_PAD2GND, AR5K_RF5112A_PAD2GND},
+ {6, AR5K_RF_XB2_LVL, AR5K_RF5112A_XB2_LVL},
+ {6, AR5K_RF_XB5_LVL, AR5K_RF5112A_XB5_LVL},
+ {7, AR5K_RF_GAIN_I, AR5K_RF5112X_GAIN_I},
+ {7, AR5K_RF_MIXVGA_OVR, AR5K_RF5112X_MIXVGA_OVR},
+ {7, AR5K_RF_MIXGAIN_OVR, AR5K_RF5112X_MIXGAIN_OVR},
+ {7, AR5K_RF_MIXGAIN_STEP, AR5K_RF5112X_MIXGAIN_STEP},
+ {7, AR5K_RF_PD_DELAY_A, AR5K_RF5112X_PD_DELAY_A},
+ {7, AR5K_RF_PD_DELAY_B, AR5K_RF5112X_PD_DELAY_B},
+ {7, AR5K_RF_PD_DELAY_XR, AR5K_RF5112X_PD_DELAY_XR},
+ {7, AR5K_RF_PD_PERIOD_A, AR5K_RF5112X_PD_PERIOD_A},
+ {7, AR5K_RF_PD_PERIOD_B, AR5K_RF5112X_PD_PERIOD_B},
+ {7, AR5K_RF_PD_PERIOD_XR, AR5K_RF5112X_PD_PERIOD_XR},
+};
+
+/* Default mode specific settings */
+static const struct ath5k_ini_rfbuffer rfb_5112a[] = {
+ /* BANK / C.R. A/XR B G */
+ { 1, 0x98d4, { 0x00000020, 0x00000020, 0x00000020 } },
+ { 2, 0x98d0, { 0x03060408, 0x03060408, 0x03060408 } },
+ { 3, 0x98dc, { 0x00a020c0, 0x00e020c0, 0x00e020c0 } },
+ { 6, 0x989c, { 0x0f000000, 0x0f000000, 0x0f000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00800000, 0x00800000, 0x00800000 } },
+ { 6, 0x989c, { 0x002a0000, 0x002a0000, 0x002a0000 } },
+ { 6, 0x989c, { 0x00010000, 0x00010000, 0x00010000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00180000, 0x00180000, 0x00180000 } },
+ { 6, 0x989c, { 0x00600000, 0x006e0000, 0x006e0000 } },
+ { 6, 0x989c, { 0x00c70000, 0x00c70000, 0x00c70000 } },
+ { 6, 0x989c, { 0x004b0000, 0x004b0000, 0x004b0000 } },
+ { 6, 0x989c, { 0x04480000, 0x04480000, 0x04480000 } },
+ { 6, 0x989c, { 0x004c0000, 0x004c0000, 0x004c0000 } },
+ { 6, 0x989c, { 0x00e40000, 0x00e40000, 0x00e40000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00fc0000, 0x00fc0000, 0x00fc0000 } },
+ { 6, 0x989c, { 0x00ff0000, 0x00ff0000, 0x00ff0000 } },
+ { 6, 0x989c, { 0x043f0000, 0x043f0000, 0x043f0000 } },
+ { 6, 0x989c, { 0x000c0000, 0x000c0000, 0x000c0000 } },
+ { 6, 0x989c, { 0x02190000, 0x02190000, 0x02190000 } },
+ { 6, 0x989c, { 0x00240000, 0x00240000, 0x00240000 } },
+ { 6, 0x989c, { 0x00b40000, 0x00b40000, 0x00b40000 } },
+ { 6, 0x989c, { 0x00990000, 0x00990000, 0x00990000 } },
+ { 6, 0x989c, { 0x00500000, 0x00500000, 0x00500000 } },
+ { 6, 0x989c, { 0x002a0000, 0x002a0000, 0x002a0000 } },
+ { 6, 0x989c, { 0x00120000, 0x00120000, 0x00120000 } },
+ { 6, 0x989c, { 0xc0320000, 0xc0320000, 0xc0320000 } },
+ { 6, 0x989c, { 0x01740000, 0x01740000, 0x01740000 } },
+ { 6, 0x989c, { 0x00110000, 0x00110000, 0x00110000 } },
+ { 6, 0x989c, { 0x86280000, 0x86280000, 0x86280000 } },
+ { 6, 0x989c, { 0x31840000, 0x31840000, 0x31840000 } },
+ { 6, 0x989c, { 0x00f20080, 0x00f20080, 0x00f20080 } },
+ { 6, 0x989c, { 0x00270019, 0x00270019, 0x00270019 } },
+ { 6, 0x989c, { 0x00000003, 0x00000003, 0x00000003 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x000000b2, 0x000000b2, 0x000000b2 } },
+ { 6, 0x989c, { 0x00b02084, 0x00b02084, 0x00b02084 } },
+ { 6, 0x989c, { 0x004125a4, 0x004125a4, 0x004125a4 } },
+ { 6, 0x989c, { 0x00119220, 0x00119220, 0x00119220 } },
+ { 6, 0x989c, { 0x001a4800, 0x001a4800, 0x001a4800 } },
+ { 6, 0x98d8, { 0x000b0230, 0x000b0230, 0x000b0230 } },
+ { 7, 0x989c, { 0x00000094, 0x00000094, 0x00000094 } },
+ { 7, 0x989c, { 0x00000091, 0x00000091, 0x00000091 } },
+ { 7, 0x989c, { 0x00000012, 0x00000012, 0x00000012 } },
+ { 7, 0x989c, { 0x00000080, 0x00000080, 0x00000080 } },
+ { 7, 0x989c, { 0x000000d9, 0x000000d9, 0x000000d9 } },
+ { 7, 0x989c, { 0x00000060, 0x00000060, 0x00000060 } },
+ { 7, 0x989c, { 0x000000f0, 0x000000f0, 0x000000f0 } },
+ { 7, 0x989c, { 0x000000a2, 0x000000a2, 0x000000a2 } },
+ { 7, 0x989c, { 0x00000052, 0x00000052, 0x00000052 } },
+ { 7, 0x989c, { 0x000000d4, 0x000000d4, 0x000000d4 } },
+ { 7, 0x989c, { 0x000014cc, 0x000014cc, 0x000014cc } },
+ { 7, 0x989c, { 0x0000048c, 0x0000048c, 0x0000048c } },
+ { 7, 0x98c4, { 0x00000003, 0x00000003, 0x00000003 } },
+};
+
+
+
+/******************\
+* RF2413 (Griffin) *
+\******************/
+
+/* BANK 2 len pos col */
+#define AR5K_RF2413_RF_TURBO { 1, 1, 2 }
+
+/* BANK 6 len pos col */
+#define AR5K_RF2413_OB_2GHZ { 3, 168, 0 }
+#define AR5K_RF2413_DB_2GHZ { 3, 165, 0 }
+
+static const struct ath5k_rf_reg rf_regs_2413[] = {
+ {2, AR5K_RF_TURBO, AR5K_RF2413_RF_TURBO},
+ {6, AR5K_RF_OB_2GHZ, AR5K_RF2413_OB_2GHZ},
+ {6, AR5K_RF_DB_2GHZ, AR5K_RF2413_DB_2GHZ},
+};
+
+/* Default mode specific settings
+ * XXX: a/aTurbo ???
+ */
+static const struct ath5k_ini_rfbuffer rfb_2413[] = {
+ /* BANK / C.R. A/XR B G */
+ { 1, 0x98d4, { 0x00000020, 0x00000020, 0x00000020 } },
+ { 2, 0x98d0, { 0x02001408, 0x02001408, 0x02001408 } },
+ { 3, 0x98dc, { 0x00a020c0, 0x00e020c0, 0x00e020c0 } },
+ { 6, 0x989c, { 0xf0000000, 0xf0000000, 0xf0000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x03000000, 0x03000000, 0x03000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x40400000, 0x40400000, 0x40400000 } },
+ { 6, 0x989c, { 0x65050000, 0x65050000, 0x65050000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00420000, 0x00420000, 0x00420000 } },
+ { 6, 0x989c, { 0x00b50000, 0x00b50000, 0x00b50000 } },
+ { 6, 0x989c, { 0x00030000, 0x00030000, 0x00030000 } },
+ { 6, 0x989c, { 0x00f70000, 0x00f70000, 0x00f70000 } },
+ { 6, 0x989c, { 0x009d0000, 0x009d0000, 0x009d0000 } },
+ { 6, 0x989c, { 0x00220000, 0x00220000, 0x00220000 } },
+ { 6, 0x989c, { 0x04220000, 0x04220000, 0x04220000 } },
+ { 6, 0x989c, { 0x00230018, 0x00230018, 0x00230018 } },
+ { 6, 0x989c, { 0x00280000, 0x00280060, 0x00280060 } },
+ { 6, 0x989c, { 0x005000c0, 0x005000c3, 0x005000c3 } },
+ { 6, 0x989c, { 0x0004007f, 0x0004007f, 0x0004007f } },
+ { 6, 0x989c, { 0x00000458, 0x00000458, 0x00000458 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x0000c000, 0x0000c000, 0x0000c000 } },
+ { 6, 0x98d8, { 0x00400230, 0x00400230, 0x00400230 } },
+ { 7, 0x989c, { 0x00006400, 0x00006400, 0x00006400 } },
+ { 7, 0x989c, { 0x00000800, 0x00000800, 0x00000800 } },
+ { 7, 0x98cc, { 0x0000000e, 0x0000000e, 0x0000000e } },
+};
+
+
+
+/***************************\
+* RF2315/RF2316 (Cobra SoC) *
+\***************************/
+
+/* BANK 2 len pos col */
+#define AR5K_RF2316_RF_TURBO { 1, 1, 2 }
+
+/* BANK 6 len pos col */
+#define AR5K_RF2316_OB_2GHZ { 3, 178, 0 }
+#define AR5K_RF2316_DB_2GHZ { 3, 175, 0 }
+
+static const struct ath5k_rf_reg rf_regs_2316[] = {
+ {2, AR5K_RF_TURBO, AR5K_RF2316_RF_TURBO},
+ {6, AR5K_RF_OB_2GHZ, AR5K_RF2316_OB_2GHZ},
+ {6, AR5K_RF_DB_2GHZ, AR5K_RF2316_DB_2GHZ},
+};
+
+/* Default mode specific settings */
+static const struct ath5k_ini_rfbuffer rfb_2316[] = {
+ /* BANK / C.R. A/XR B G */
+ { 1, 0x98d4, { 0x00000020, 0x00000020, 0x00000020 } },
+ { 2, 0x98d0, { 0x02001408, 0x02001408, 0x02001408 } },
+ { 3, 0x98dc, { 0x00a020c0, 0x00e020c0, 0x00e020c0 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0xc0000000, 0xc0000000, 0xc0000000 } },
+ { 6, 0x989c, { 0x0f000000, 0x0f000000, 0x0f000000 } },
+ { 6, 0x989c, { 0x02000000, 0x02000000, 0x02000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0xf8000000, 0xf8000000, 0xf8000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x95150000, 0x95150000, 0x95150000 } },
+ { 6, 0x989c, { 0xc1000000, 0xc1000000, 0xc1000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00080000, 0x00080000, 0x00080000 } },
+ { 6, 0x989c, { 0x00d50000, 0x00d50000, 0x00d50000 } },
+ { 6, 0x989c, { 0x000e0000, 0x000e0000, 0x000e0000 } },
+ { 6, 0x989c, { 0x00dc0000, 0x00dc0000, 0x00dc0000 } },
+ { 6, 0x989c, { 0x00770000, 0x00770000, 0x00770000 } },
+ { 6, 0x989c, { 0x008a0000, 0x008a0000, 0x008a0000 } },
+ { 6, 0x989c, { 0x10880000, 0x10880000, 0x10880000 } },
+ { 6, 0x989c, { 0x008c0060, 0x008c0060, 0x008c0060 } },
+ { 6, 0x989c, { 0x00a00000, 0x00a00080, 0x00a00080 } },
+ { 6, 0x989c, { 0x00400000, 0x0040000d, 0x0040000d } },
+ { 6, 0x989c, { 0x00110400, 0x00110400, 0x00110400 } },
+ { 6, 0x989c, { 0x00000060, 0x00000060, 0x00000060 } },
+ { 6, 0x989c, { 0x00000001, 0x00000001, 0x00000001 } },
+ { 6, 0x989c, { 0x00000b00, 0x00000b00, 0x00000b00 } },
+ { 6, 0x989c, { 0x00000be8, 0x00000be8, 0x00000be8 } },
+ { 6, 0x98c0, { 0x00010000, 0x00010000, 0x00010000 } },
+ { 7, 0x989c, { 0x00006400, 0x00006400, 0x00006400 } },
+ { 7, 0x989c, { 0x00000800, 0x00000800, 0x00000800 } },
+ { 7, 0x98cc, { 0x0000000e, 0x0000000e, 0x0000000e } },
+};
+
+
+
+/******************************\
+* RF5413/RF5424 (Eagle/Condor) *
+\******************************/
+
+/* BANK 6 len pos col */
+#define AR5K_RF5413_OB_2GHZ { 3, 241, 0 }
+#define AR5K_RF5413_DB_2GHZ { 3, 238, 0 }
+
+#define AR5K_RF5413_OB_5GHZ { 3, 247, 0 }
+#define AR5K_RF5413_DB_5GHZ { 3, 244, 0 }
+
+#define AR5K_RF5413_PWD_ICLOBUF2G { 3, 131, 3 }
+#define AR5K_RF5413_DERBY_CHAN_SEL_MODE { 1, 291, 2 }
+
+static const struct ath5k_rf_reg rf_regs_5413[] = {
+ {6, AR5K_RF_OB_2GHZ, AR5K_RF5413_OB_2GHZ},
+ {6, AR5K_RF_DB_2GHZ, AR5K_RF5413_DB_2GHZ},
+ {6, AR5K_RF_OB_5GHZ, AR5K_RF5413_OB_5GHZ},
+ {6, AR5K_RF_DB_5GHZ, AR5K_RF5413_DB_5GHZ},
+ {6, AR5K_RF_PWD_ICLOBUF_2G, AR5K_RF5413_PWD_ICLOBUF2G},
+ {6, AR5K_RF_DERBY_CHAN_SEL_MODE, AR5K_RF5413_DERBY_CHAN_SEL_MODE},
+};
+
+/* Default mode specific settings */
+static const struct ath5k_ini_rfbuffer rfb_5413[] = {
+ /* BANK / C.R. A/XR B G */
+ { 1, 0x98d4, { 0x00000020, 0x00000020, 0x00000020 } },
+ { 2, 0x98d0, { 0x00000008, 0x00000008, 0x00000008 } },
+ { 3, 0x98dc, { 0x00a000c0, 0x00e000c0, 0x00e000c0 } },
+ { 6, 0x989c, { 0x33000000, 0x33000000, 0x33000000 } },
+ { 6, 0x989c, { 0x01000000, 0x01000000, 0x01000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x1f000000, 0x1f000000, 0x1f000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00b80000, 0x00b80000, 0x00b80000 } },
+ { 6, 0x989c, { 0x00b70000, 0x00b70000, 0x00b70000 } },
+ { 6, 0x989c, { 0x00840000, 0x00840000, 0x00840000 } },
+ { 6, 0x989c, { 0x00980000, 0x00980000, 0x00980000 } },
+ { 6, 0x989c, { 0x00c00000, 0x00c00000, 0x00c00000 } },
+ { 6, 0x989c, { 0x00ff0000, 0x00ff0000, 0x00ff0000 } },
+ { 6, 0x989c, { 0x00ff0000, 0x00ff0000, 0x00ff0000 } },
+ { 6, 0x989c, { 0x00ff0000, 0x00ff0000, 0x00ff0000 } },
+ { 6, 0x989c, { 0x00ff0000, 0x00ff0000, 0x00ff0000 } },
+ { 6, 0x989c, { 0x00d70000, 0x00d70000, 0x00d70000 } },
+ { 6, 0x989c, { 0x00610000, 0x00610000, 0x00610000 } },
+ { 6, 0x989c, { 0x00fe0000, 0x00fe0000, 0x00fe0000 } },
+ { 6, 0x989c, { 0x00de0000, 0x00de0000, 0x00de0000 } },
+ { 6, 0x989c, { 0x007f0000, 0x007f0000, 0x007f0000 } },
+ { 6, 0x989c, { 0x043d0000, 0x043d0000, 0x043d0000 } },
+ { 6, 0x989c, { 0x00770000, 0x00770000, 0x00770000 } },
+ { 6, 0x989c, { 0x00440000, 0x00440000, 0x00440000 } },
+ { 6, 0x989c, { 0x00980000, 0x00980000, 0x00980000 } },
+ { 6, 0x989c, { 0x00100080, 0x00100080, 0x00100080 } },
+ { 6, 0x989c, { 0x0005c034, 0x0005c034, 0x0005c034 } },
+ { 6, 0x989c, { 0x003100f0, 0x003100f0, 0x003100f0 } },
+ { 6, 0x989c, { 0x000c011f, 0x000c011f, 0x000c011f } },
+ { 6, 0x989c, { 0x00510040, 0x00510040, 0x00510040 } },
+ { 6, 0x989c, { 0x005000da, 0x005000da, 0x005000da } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00004044, 0x00004044, 0x00004044 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x000060c0, 0x000060c0, 0x000060c0 } },
+ { 6, 0x989c, { 0x00002c00, 0x00003600, 0x00003600 } },
+ { 6, 0x98c8, { 0x00000403, 0x00040403, 0x00040403 } },
+ { 7, 0x989c, { 0x00006400, 0x00006400, 0x00006400 } },
+ { 7, 0x989c, { 0x00000800, 0x00000800, 0x00000800 } },
+ { 7, 0x98cc, { 0x0000000e, 0x0000000e, 0x0000000e } },
+};
+
+
+
+/***************************\
+* RF2425/RF2417 (Swan/Nala) *
+* AR2317 (Spider SoC) *
+\***************************/
+
+/* BANK 2 len pos col */
+#define AR5K_RF2425_RF_TURBO { 1, 1, 2 }
+
+/* BANK 6 len pos col */
+#define AR5K_RF2425_OB_2GHZ { 3, 193, 0 }
+#define AR5K_RF2425_DB_2GHZ { 3, 190, 0 }
+
+static const struct ath5k_rf_reg rf_regs_2425[] = {
+ {2, AR5K_RF_TURBO, AR5K_RF2425_RF_TURBO},
+ {6, AR5K_RF_OB_2GHZ, AR5K_RF2425_OB_2GHZ},
+ {6, AR5K_RF_DB_2GHZ, AR5K_RF2425_DB_2GHZ},
+};
+
+/* Default mode specific settings
+ */
+static const struct ath5k_ini_rfbuffer rfb_2425[] = {
+ /* BANK / C.R. A/XR B G */
+ { 1, 0x98d4, { 0x00000020, 0x00000020, 0x00000020 } },
+ { 2, 0x98d0, { 0x02001408, 0x02001408, 0x02001408 } },
+ { 3, 0x98dc, { 0x00a020c0, 0x00e020c0, 0x00e020c0 } },
+ { 6, 0x989c, { 0x10000000, 0x10000000, 0x10000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x002a0000, 0x002a0000, 0x002a0000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00100000, 0x00100000, 0x00100000 } },
+ { 6, 0x989c, { 0x00020000, 0x00020000, 0x00020000 } },
+ { 6, 0x989c, { 0x00730000, 0x00730000, 0x00730000 } },
+ { 6, 0x989c, { 0x00f80000, 0x00f80000, 0x00f80000 } },
+ { 6, 0x989c, { 0x00e70000, 0x00e70000, 0x00e70000 } },
+ { 6, 0x989c, { 0x00140000, 0x00140000, 0x00140000 } },
+ { 6, 0x989c, { 0x00910040, 0x00910040, 0x00910040 } },
+ { 6, 0x989c, { 0x0007001a, 0x0007001a, 0x0007001a } },
+ { 6, 0x989c, { 0x00410000, 0x00410000, 0x00410000 } },
+ { 6, 0x989c, { 0x00810000, 0x00810060, 0x00810060 } },
+ { 6, 0x989c, { 0x00020800, 0x00020803, 0x00020803 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00001660, 0x00001660, 0x00001660 } },
+ { 6, 0x989c, { 0x00001688, 0x00001688, 0x00001688 } },
+ { 6, 0x98c4, { 0x00000001, 0x00000001, 0x00000001 } },
+ { 7, 0x989c, { 0x00006400, 0x00006400, 0x00006400 } },
+ { 7, 0x989c, { 0x00000800, 0x00000800, 0x00000800 } },
+ { 7, 0x98cc, { 0x0000000e, 0x0000000e, 0x0000000e } },
+};
+
+/*
+ * TODO: Handle the few differences with swan during
+ * bank modification and get rid of this
+ */
+static const struct ath5k_ini_rfbuffer rfb_2317[] = {
+ /* BANK / C.R. A/XR B G */
+ { 1, 0x98d4, { 0x00000020, 0x00000020, 0x00000020 } },
+ { 2, 0x98d0, { 0x02001408, 0x02001408, 0x02001408 } },
+ { 3, 0x98dc, { 0x00a020c0, 0x00e020c0, 0x00e020c0 } },
+ { 6, 0x989c, { 0x10000000, 0x10000000, 0x10000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x002a0000, 0x002a0000, 0x002a0000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00100000, 0x00100000, 0x00100000 } },
+ { 6, 0x989c, { 0x00020000, 0x00020000, 0x00020000 } },
+ { 6, 0x989c, { 0x00730000, 0x00730000, 0x00730000 } },
+ { 6, 0x989c, { 0x00f80000, 0x00f80000, 0x00f80000 } },
+ { 6, 0x989c, { 0x00e70000, 0x00e70000, 0x00e70000 } },
+ { 6, 0x989c, { 0x00140100, 0x00140100, 0x00140100 } },
+ { 6, 0x989c, { 0x00910040, 0x00910040, 0x00910040 } },
+ { 6, 0x989c, { 0x0007001a, 0x0007001a, 0x0007001a } },
+ { 6, 0x989c, { 0x00410000, 0x00410000, 0x00410000 } },
+ { 6, 0x989c, { 0x00810000, 0x00810060, 0x00810060 } },
+ { 6, 0x989c, { 0x00020800, 0x00020803, 0x00020803 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00001660, 0x00001660, 0x00001660 } },
+ { 6, 0x989c, { 0x00009688, 0x00009688, 0x00009688 } },
+ { 6, 0x98c4, { 0x00000001, 0x00000001, 0x00000001 } },
+ { 7, 0x989c, { 0x00006400, 0x00006400, 0x00006400 } },
+ { 7, 0x989c, { 0x00000800, 0x00000800, 0x00000800 } },
+ { 7, 0x98cc, { 0x0000000e, 0x0000000e, 0x0000000e } },
+};
+
+/*
+ * TODO: Handle the few differences with swan during
+ * bank modification and get rid of this
+ */
+static const struct ath5k_ini_rfbuffer rfb_2417[] = {
+ /* BANK / C.R. A/XR B G */
+ { 1, 0x98d4, { 0x00000020, 0x00000020, 0x00000020 } },
+ { 2, 0x98d0, { 0x02001408, 0x02001408, 0x02001408 } },
+ { 3, 0x98dc, { 0x00a020c0, 0x00e020c0, 0x00e020c0 } },
+ { 6, 0x989c, { 0x10000000, 0x10000000, 0x10000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x002a0000, 0x002a0000, 0x002a0000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00100000, 0x00100000, 0x00100000 } },
+ { 6, 0x989c, { 0x00020000, 0x00020000, 0x00020000 } },
+ { 6, 0x989c, { 0x00730000, 0x00730000, 0x00730000 } },
+ { 6, 0x989c, { 0x00f80000, 0x00f80000, 0x00f80000 } },
+ { 6, 0x989c, { 0x00e70000, 0x80e70000, 0x80e70000 } },
+ { 6, 0x989c, { 0x00140000, 0x00140000, 0x00140000 } },
+ { 6, 0x989c, { 0x00910040, 0x00910040, 0x00910040 } },
+ { 6, 0x989c, { 0x0007001a, 0x0207001a, 0x0207001a } },
+ { 6, 0x989c, { 0x00410000, 0x00410000, 0x00410000 } },
+ { 6, 0x989c, { 0x00810000, 0x00810060, 0x00810060 } },
+ { 6, 0x989c, { 0x00020800, 0x00020803, 0x00020803 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c, { 0x00001660, 0x00001660, 0x00001660 } },
+ { 6, 0x989c, { 0x00001688, 0x00001688, 0x00001688 } },
+ { 6, 0x98c4, { 0x00000001, 0x00000001, 0x00000001 } },
+ { 7, 0x989c, { 0x00006400, 0x00006400, 0x00006400 } },
+ { 7, 0x989c, { 0x00000800, 0x00000800, 0x00000800 } },
+ { 7, 0x98cc, { 0x0000000e, 0x0000000e, 0x0000000e } },
+};
diff --git a/drivers/net/wireless/ath/ath5k/rfgain.h b/drivers/net/wireless/ath/ath5k/rfgain.h
new file mode 100644
index 000000000..4d21df0e5
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/rfgain.h
@@ -0,0 +1,534 @@
+/*
+ * RF Gain optimization
+ *
+ * Copyright (c) 2004-2009 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2009 Nick Kossifidis <mickflemm@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/**
+ * struct ath5k_ini_rfgain - RF Gain table
+ * @rfg_register: RF Gain register address
+ * @rfg_value: Register value for 5 and 2GHz
+ *
+ * Mode-specific RF Gain table (64bytes) for RF5111/5112
+ * (RF5110 only comes with AR5210 and only supports a/turbo a mode so initial
+ * RF Gain values are included in AR5K_AR5210_INI)
+ */
+struct ath5k_ini_rfgain {
+ u16 rfg_register;
+ u32 rfg_value[2]; /* [freq (see below)] */
+};
+
+/* Initial RF Gain settings for RF5111 */
+static const struct ath5k_ini_rfgain rfgain_5111[] = {
+ /* 5GHz 2GHz */
+ { AR5K_RF_GAIN(0), { 0x000001a9, 0x00000000 } },
+ { AR5K_RF_GAIN(1), { 0x000001e9, 0x00000040 } },
+ { AR5K_RF_GAIN(2), { 0x00000029, 0x00000080 } },
+ { AR5K_RF_GAIN(3), { 0x00000069, 0x00000150 } },
+ { AR5K_RF_GAIN(4), { 0x00000199, 0x00000190 } },
+ { AR5K_RF_GAIN(5), { 0x000001d9, 0x000001d0 } },
+ { AR5K_RF_GAIN(6), { 0x00000019, 0x00000010 } },
+ { AR5K_RF_GAIN(7), { 0x00000059, 0x00000044 } },
+ { AR5K_RF_GAIN(8), { 0x00000099, 0x00000084 } },
+ { AR5K_RF_GAIN(9), { 0x000001a5, 0x00000148 } },
+ { AR5K_RF_GAIN(10), { 0x000001e5, 0x00000188 } },
+ { AR5K_RF_GAIN(11), { 0x00000025, 0x000001c8 } },
+ { AR5K_RF_GAIN(12), { 0x000001c8, 0x00000014 } },
+ { AR5K_RF_GAIN(13), { 0x00000008, 0x00000042 } },
+ { AR5K_RF_GAIN(14), { 0x00000048, 0x00000082 } },
+ { AR5K_RF_GAIN(15), { 0x00000088, 0x00000178 } },
+ { AR5K_RF_GAIN(16), { 0x00000198, 0x000001b8 } },
+ { AR5K_RF_GAIN(17), { 0x000001d8, 0x000001f8 } },
+ { AR5K_RF_GAIN(18), { 0x00000018, 0x00000012 } },
+ { AR5K_RF_GAIN(19), { 0x00000058, 0x00000052 } },
+ { AR5K_RF_GAIN(20), { 0x00000098, 0x00000092 } },
+ { AR5K_RF_GAIN(21), { 0x000001a4, 0x0000017c } },
+ { AR5K_RF_GAIN(22), { 0x000001e4, 0x000001bc } },
+ { AR5K_RF_GAIN(23), { 0x00000024, 0x000001fc } },
+ { AR5K_RF_GAIN(24), { 0x00000064, 0x0000000a } },
+ { AR5K_RF_GAIN(25), { 0x000000a4, 0x0000004a } },
+ { AR5K_RF_GAIN(26), { 0x000000e4, 0x0000008a } },
+ { AR5K_RF_GAIN(27), { 0x0000010a, 0x0000015a } },
+ { AR5K_RF_GAIN(28), { 0x0000014a, 0x0000019a } },
+ { AR5K_RF_GAIN(29), { 0x0000018a, 0x000001da } },
+ { AR5K_RF_GAIN(30), { 0x000001ca, 0x0000000e } },
+ { AR5K_RF_GAIN(31), { 0x0000000a, 0x0000004e } },
+ { AR5K_RF_GAIN(32), { 0x0000004a, 0x0000008e } },
+ { AR5K_RF_GAIN(33), { 0x0000008a, 0x0000015e } },
+ { AR5K_RF_GAIN(34), { 0x000001ba, 0x0000019e } },
+ { AR5K_RF_GAIN(35), { 0x000001fa, 0x000001de } },
+ { AR5K_RF_GAIN(36), { 0x0000003a, 0x00000009 } },
+ { AR5K_RF_GAIN(37), { 0x0000007a, 0x00000049 } },
+ { AR5K_RF_GAIN(38), { 0x00000186, 0x00000089 } },
+ { AR5K_RF_GAIN(39), { 0x000001c6, 0x00000179 } },
+ { AR5K_RF_GAIN(40), { 0x00000006, 0x000001b9 } },
+ { AR5K_RF_GAIN(41), { 0x00000046, 0x000001f9 } },
+ { AR5K_RF_GAIN(42), { 0x00000086, 0x00000039 } },
+ { AR5K_RF_GAIN(43), { 0x000000c6, 0x00000079 } },
+ { AR5K_RF_GAIN(44), { 0x000000c6, 0x000000b9 } },
+ { AR5K_RF_GAIN(45), { 0x000000c6, 0x000001bd } },
+ { AR5K_RF_GAIN(46), { 0x000000c6, 0x000001fd } },
+ { AR5K_RF_GAIN(47), { 0x000000c6, 0x0000003d } },
+ { AR5K_RF_GAIN(48), { 0x000000c6, 0x0000007d } },
+ { AR5K_RF_GAIN(49), { 0x000000c6, 0x000000bd } },
+ { AR5K_RF_GAIN(50), { 0x000000c6, 0x000000fd } },
+ { AR5K_RF_GAIN(51), { 0x000000c6, 0x000000fd } },
+ { AR5K_RF_GAIN(52), { 0x000000c6, 0x000000fd } },
+ { AR5K_RF_GAIN(53), { 0x000000c6, 0x000000fd } },
+ { AR5K_RF_GAIN(54), { 0x000000c6, 0x000000fd } },
+ { AR5K_RF_GAIN(55), { 0x000000c6, 0x000000fd } },
+ { AR5K_RF_GAIN(56), { 0x000000c6, 0x000000fd } },
+ { AR5K_RF_GAIN(57), { 0x000000c6, 0x000000fd } },
+ { AR5K_RF_GAIN(58), { 0x000000c6, 0x000000fd } },
+ { AR5K_RF_GAIN(59), { 0x000000c6, 0x000000fd } },
+ { AR5K_RF_GAIN(60), { 0x000000c6, 0x000000fd } },
+ { AR5K_RF_GAIN(61), { 0x000000c6, 0x000000fd } },
+ { AR5K_RF_GAIN(62), { 0x000000c6, 0x000000fd } },
+ { AR5K_RF_GAIN(63), { 0x000000c6, 0x000000fd } },
+};
+
+/* Initial RF Gain settings for RF5112 */
+static const struct ath5k_ini_rfgain rfgain_5112[] = {
+ /* 5GHz 2GHz */
+ { AR5K_RF_GAIN(0), { 0x00000007, 0x00000007 } },
+ { AR5K_RF_GAIN(1), { 0x00000047, 0x00000047 } },
+ { AR5K_RF_GAIN(2), { 0x00000087, 0x00000087 } },
+ { AR5K_RF_GAIN(3), { 0x000001a0, 0x000001a0 } },
+ { AR5K_RF_GAIN(4), { 0x000001e0, 0x000001e0 } },
+ { AR5K_RF_GAIN(5), { 0x00000020, 0x00000020 } },
+ { AR5K_RF_GAIN(6), { 0x00000060, 0x00000060 } },
+ { AR5K_RF_GAIN(7), { 0x000001a1, 0x000001a1 } },
+ { AR5K_RF_GAIN(8), { 0x000001e1, 0x000001e1 } },
+ { AR5K_RF_GAIN(9), { 0x00000021, 0x00000021 } },
+ { AR5K_RF_GAIN(10), { 0x00000061, 0x00000061 } },
+ { AR5K_RF_GAIN(11), { 0x00000162, 0x00000162 } },
+ { AR5K_RF_GAIN(12), { 0x000001a2, 0x000001a2 } },
+ { AR5K_RF_GAIN(13), { 0x000001e2, 0x000001e2 } },
+ { AR5K_RF_GAIN(14), { 0x00000022, 0x00000022 } },
+ { AR5K_RF_GAIN(15), { 0x00000062, 0x00000062 } },
+ { AR5K_RF_GAIN(16), { 0x00000163, 0x00000163 } },
+ { AR5K_RF_GAIN(17), { 0x000001a3, 0x000001a3 } },
+ { AR5K_RF_GAIN(18), { 0x000001e3, 0x000001e3 } },
+ { AR5K_RF_GAIN(19), { 0x00000023, 0x00000023 } },
+ { AR5K_RF_GAIN(20), { 0x00000063, 0x00000063 } },
+ { AR5K_RF_GAIN(21), { 0x00000184, 0x00000184 } },
+ { AR5K_RF_GAIN(22), { 0x000001c4, 0x000001c4 } },
+ { AR5K_RF_GAIN(23), { 0x00000004, 0x00000004 } },
+ { AR5K_RF_GAIN(24), { 0x000001ea, 0x0000000b } },
+ { AR5K_RF_GAIN(25), { 0x0000002a, 0x0000004b } },
+ { AR5K_RF_GAIN(26), { 0x0000006a, 0x0000008b } },
+ { AR5K_RF_GAIN(27), { 0x000000aa, 0x000001ac } },
+ { AR5K_RF_GAIN(28), { 0x000001ab, 0x000001ec } },
+ { AR5K_RF_GAIN(29), { 0x000001eb, 0x0000002c } },
+ { AR5K_RF_GAIN(30), { 0x0000002b, 0x00000012 } },
+ { AR5K_RF_GAIN(31), { 0x0000006b, 0x00000052 } },
+ { AR5K_RF_GAIN(32), { 0x000000ab, 0x00000092 } },
+ { AR5K_RF_GAIN(33), { 0x000001ac, 0x00000193 } },
+ { AR5K_RF_GAIN(34), { 0x000001ec, 0x000001d3 } },
+ { AR5K_RF_GAIN(35), { 0x0000002c, 0x00000013 } },
+ { AR5K_RF_GAIN(36), { 0x0000003a, 0x00000053 } },
+ { AR5K_RF_GAIN(37), { 0x0000007a, 0x00000093 } },
+ { AR5K_RF_GAIN(38), { 0x000000ba, 0x00000194 } },
+ { AR5K_RF_GAIN(39), { 0x000001bb, 0x000001d4 } },
+ { AR5K_RF_GAIN(40), { 0x000001fb, 0x00000014 } },
+ { AR5K_RF_GAIN(41), { 0x0000003b, 0x0000003a } },
+ { AR5K_RF_GAIN(42), { 0x0000007b, 0x0000007a } },
+ { AR5K_RF_GAIN(43), { 0x000000bb, 0x000000ba } },
+ { AR5K_RF_GAIN(44), { 0x000001bc, 0x000001bb } },
+ { AR5K_RF_GAIN(45), { 0x000001fc, 0x000001fb } },
+ { AR5K_RF_GAIN(46), { 0x0000003c, 0x0000003b } },
+ { AR5K_RF_GAIN(47), { 0x0000007c, 0x0000007b } },
+ { AR5K_RF_GAIN(48), { 0x000000bc, 0x000000bb } },
+ { AR5K_RF_GAIN(49), { 0x000000fc, 0x000001bc } },
+ { AR5K_RF_GAIN(50), { 0x000000fc, 0x000001fc } },
+ { AR5K_RF_GAIN(51), { 0x000000fc, 0x0000003c } },
+ { AR5K_RF_GAIN(52), { 0x000000fc, 0x0000007c } },
+ { AR5K_RF_GAIN(53), { 0x000000fc, 0x000000bc } },
+ { AR5K_RF_GAIN(54), { 0x000000fc, 0x000000fc } },
+ { AR5K_RF_GAIN(55), { 0x000000fc, 0x000000fc } },
+ { AR5K_RF_GAIN(56), { 0x000000fc, 0x000000fc } },
+ { AR5K_RF_GAIN(57), { 0x000000fc, 0x000000fc } },
+ { AR5K_RF_GAIN(58), { 0x000000fc, 0x000000fc } },
+ { AR5K_RF_GAIN(59), { 0x000000fc, 0x000000fc } },
+ { AR5K_RF_GAIN(60), { 0x000000fc, 0x000000fc } },
+ { AR5K_RF_GAIN(61), { 0x000000fc, 0x000000fc } },
+ { AR5K_RF_GAIN(62), { 0x000000fc, 0x000000fc } },
+ { AR5K_RF_GAIN(63), { 0x000000fc, 0x000000fc } },
+};
+
+/* Initial RF Gain settings for RF2413 */
+static const struct ath5k_ini_rfgain rfgain_2413[] = {
+ { AR5K_RF_GAIN(0), { 0x00000000, 0x00000000 } },
+ { AR5K_RF_GAIN(1), { 0x00000000, 0x00000040 } },
+ { AR5K_RF_GAIN(2), { 0x00000000, 0x00000080 } },
+ { AR5K_RF_GAIN(3), { 0x00000000, 0x00000181 } },
+ { AR5K_RF_GAIN(4), { 0x00000000, 0x000001c1 } },
+ { AR5K_RF_GAIN(5), { 0x00000000, 0x00000001 } },
+ { AR5K_RF_GAIN(6), { 0x00000000, 0x00000041 } },
+ { AR5K_RF_GAIN(7), { 0x00000000, 0x00000081 } },
+ { AR5K_RF_GAIN(8), { 0x00000000, 0x00000168 } },
+ { AR5K_RF_GAIN(9), { 0x00000000, 0x000001a8 } },
+ { AR5K_RF_GAIN(10), { 0x00000000, 0x000001e8 } },
+ { AR5K_RF_GAIN(11), { 0x00000000, 0x00000028 } },
+ { AR5K_RF_GAIN(12), { 0x00000000, 0x00000068 } },
+ { AR5K_RF_GAIN(13), { 0x00000000, 0x00000189 } },
+ { AR5K_RF_GAIN(14), { 0x00000000, 0x000001c9 } },
+ { AR5K_RF_GAIN(15), { 0x00000000, 0x00000009 } },
+ { AR5K_RF_GAIN(16), { 0x00000000, 0x00000049 } },
+ { AR5K_RF_GAIN(17), { 0x00000000, 0x00000089 } },
+ { AR5K_RF_GAIN(18), { 0x00000000, 0x00000190 } },
+ { AR5K_RF_GAIN(19), { 0x00000000, 0x000001d0 } },
+ { AR5K_RF_GAIN(20), { 0x00000000, 0x00000010 } },
+ { AR5K_RF_GAIN(21), { 0x00000000, 0x00000050 } },
+ { AR5K_RF_GAIN(22), { 0x00000000, 0x00000090 } },
+ { AR5K_RF_GAIN(23), { 0x00000000, 0x00000191 } },
+ { AR5K_RF_GAIN(24), { 0x00000000, 0x000001d1 } },
+ { AR5K_RF_GAIN(25), { 0x00000000, 0x00000011 } },
+ { AR5K_RF_GAIN(26), { 0x00000000, 0x00000051 } },
+ { AR5K_RF_GAIN(27), { 0x00000000, 0x00000091 } },
+ { AR5K_RF_GAIN(28), { 0x00000000, 0x00000178 } },
+ { AR5K_RF_GAIN(29), { 0x00000000, 0x000001b8 } },
+ { AR5K_RF_GAIN(30), { 0x00000000, 0x000001f8 } },
+ { AR5K_RF_GAIN(31), { 0x00000000, 0x00000038 } },
+ { AR5K_RF_GAIN(32), { 0x00000000, 0x00000078 } },
+ { AR5K_RF_GAIN(33), { 0x00000000, 0x00000199 } },
+ { AR5K_RF_GAIN(34), { 0x00000000, 0x000001d9 } },
+ { AR5K_RF_GAIN(35), { 0x00000000, 0x00000019 } },
+ { AR5K_RF_GAIN(36), { 0x00000000, 0x00000059 } },
+ { AR5K_RF_GAIN(37), { 0x00000000, 0x00000099 } },
+ { AR5K_RF_GAIN(38), { 0x00000000, 0x000000d9 } },
+ { AR5K_RF_GAIN(39), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(40), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(41), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(42), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(43), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(44), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(45), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(46), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(47), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(48), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(49), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(50), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(51), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(52), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(53), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(54), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(55), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(56), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(57), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(58), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(59), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(60), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(61), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(62), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(63), { 0x00000000, 0x000000f9 } },
+};
+
+/* Initial RF Gain settings for AR2316 */
+static const struct ath5k_ini_rfgain rfgain_2316[] = {
+ { AR5K_RF_GAIN(0), { 0x00000000, 0x00000000 } },
+ { AR5K_RF_GAIN(1), { 0x00000000, 0x00000040 } },
+ { AR5K_RF_GAIN(2), { 0x00000000, 0x00000080 } },
+ { AR5K_RF_GAIN(3), { 0x00000000, 0x000000c0 } },
+ { AR5K_RF_GAIN(4), { 0x00000000, 0x000000e0 } },
+ { AR5K_RF_GAIN(5), { 0x00000000, 0x000000e0 } },
+ { AR5K_RF_GAIN(6), { 0x00000000, 0x00000128 } },
+ { AR5K_RF_GAIN(7), { 0x00000000, 0x00000128 } },
+ { AR5K_RF_GAIN(8), { 0x00000000, 0x00000128 } },
+ { AR5K_RF_GAIN(9), { 0x00000000, 0x00000168 } },
+ { AR5K_RF_GAIN(10), { 0x00000000, 0x000001a8 } },
+ { AR5K_RF_GAIN(11), { 0x00000000, 0x000001e8 } },
+ { AR5K_RF_GAIN(12), { 0x00000000, 0x00000028 } },
+ { AR5K_RF_GAIN(13), { 0x00000000, 0x00000068 } },
+ { AR5K_RF_GAIN(14), { 0x00000000, 0x000000a8 } },
+ { AR5K_RF_GAIN(15), { 0x00000000, 0x000000e8 } },
+ { AR5K_RF_GAIN(16), { 0x00000000, 0x000000e8 } },
+ { AR5K_RF_GAIN(17), { 0x00000000, 0x00000130 } },
+ { AR5K_RF_GAIN(18), { 0x00000000, 0x00000130 } },
+ { AR5K_RF_GAIN(19), { 0x00000000, 0x00000170 } },
+ { AR5K_RF_GAIN(20), { 0x00000000, 0x000001b0 } },
+ { AR5K_RF_GAIN(21), { 0x00000000, 0x000001f0 } },
+ { AR5K_RF_GAIN(22), { 0x00000000, 0x00000030 } },
+ { AR5K_RF_GAIN(23), { 0x00000000, 0x00000070 } },
+ { AR5K_RF_GAIN(24), { 0x00000000, 0x000000b0 } },
+ { AR5K_RF_GAIN(25), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(26), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(27), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(28), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(29), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(30), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(31), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(32), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(33), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(34), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(35), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(36), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(37), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(38), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(39), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(40), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(41), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(42), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(43), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(44), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(45), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(46), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(47), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(48), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(49), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(50), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(51), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(52), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(53), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(54), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(55), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(56), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(57), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(58), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(59), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(60), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(61), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(62), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(63), { 0x00000000, 0x000000f0 } },
+};
+
+
+/* Initial RF Gain settings for RF5413 */
+static const struct ath5k_ini_rfgain rfgain_5413[] = {
+ /* 5GHz 2GHz */
+ { AR5K_RF_GAIN(0), { 0x00000000, 0x00000000 } },
+ { AR5K_RF_GAIN(1), { 0x00000040, 0x00000040 } },
+ { AR5K_RF_GAIN(2), { 0x00000080, 0x00000080 } },
+ { AR5K_RF_GAIN(3), { 0x000001a1, 0x00000161 } },
+ { AR5K_RF_GAIN(4), { 0x000001e1, 0x000001a1 } },
+ { AR5K_RF_GAIN(5), { 0x00000021, 0x000001e1 } },
+ { AR5K_RF_GAIN(6), { 0x00000061, 0x00000021 } },
+ { AR5K_RF_GAIN(7), { 0x00000188, 0x00000061 } },
+ { AR5K_RF_GAIN(8), { 0x000001c8, 0x00000188 } },
+ { AR5K_RF_GAIN(9), { 0x00000008, 0x000001c8 } },
+ { AR5K_RF_GAIN(10), { 0x00000048, 0x00000008 } },
+ { AR5K_RF_GAIN(11), { 0x00000088, 0x00000048 } },
+ { AR5K_RF_GAIN(12), { 0x000001a9, 0x00000088 } },
+ { AR5K_RF_GAIN(13), { 0x000001e9, 0x00000169 } },
+ { AR5K_RF_GAIN(14), { 0x00000029, 0x000001a9 } },
+ { AR5K_RF_GAIN(15), { 0x00000069, 0x000001e9 } },
+ { AR5K_RF_GAIN(16), { 0x000001d0, 0x00000029 } },
+ { AR5K_RF_GAIN(17), { 0x00000010, 0x00000069 } },
+ { AR5K_RF_GAIN(18), { 0x00000050, 0x00000190 } },
+ { AR5K_RF_GAIN(19), { 0x00000090, 0x000001d0 } },
+ { AR5K_RF_GAIN(20), { 0x000001b1, 0x00000010 } },
+ { AR5K_RF_GAIN(21), { 0x000001f1, 0x00000050 } },
+ { AR5K_RF_GAIN(22), { 0x00000031, 0x00000090 } },
+ { AR5K_RF_GAIN(23), { 0x00000071, 0x00000171 } },
+ { AR5K_RF_GAIN(24), { 0x000001b8, 0x000001b1 } },
+ { AR5K_RF_GAIN(25), { 0x000001f8, 0x000001f1 } },
+ { AR5K_RF_GAIN(26), { 0x00000038, 0x00000031 } },
+ { AR5K_RF_GAIN(27), { 0x00000078, 0x00000071 } },
+ { AR5K_RF_GAIN(28), { 0x00000199, 0x00000198 } },
+ { AR5K_RF_GAIN(29), { 0x000001d9, 0x000001d8 } },
+ { AR5K_RF_GAIN(30), { 0x00000019, 0x00000018 } },
+ { AR5K_RF_GAIN(31), { 0x00000059, 0x00000058 } },
+ { AR5K_RF_GAIN(32), { 0x00000099, 0x00000098 } },
+ { AR5K_RF_GAIN(33), { 0x000000d9, 0x00000179 } },
+ { AR5K_RF_GAIN(34), { 0x000000f9, 0x000001b9 } },
+ { AR5K_RF_GAIN(35), { 0x000000f9, 0x000001f9 } },
+ { AR5K_RF_GAIN(36), { 0x000000f9, 0x00000039 } },
+ { AR5K_RF_GAIN(37), { 0x000000f9, 0x00000079 } },
+ { AR5K_RF_GAIN(38), { 0x000000f9, 0x000000b9 } },
+ { AR5K_RF_GAIN(39), { 0x000000f9, 0x000000f9 } },
+ { AR5K_RF_GAIN(40), { 0x000000f9, 0x000000f9 } },
+ { AR5K_RF_GAIN(41), { 0x000000f9, 0x000000f9 } },
+ { AR5K_RF_GAIN(42), { 0x000000f9, 0x000000f9 } },
+ { AR5K_RF_GAIN(43), { 0x000000f9, 0x000000f9 } },
+ { AR5K_RF_GAIN(44), { 0x000000f9, 0x000000f9 } },
+ { AR5K_RF_GAIN(45), { 0x000000f9, 0x000000f9 } },
+ { AR5K_RF_GAIN(46), { 0x000000f9, 0x000000f9 } },
+ { AR5K_RF_GAIN(47), { 0x000000f9, 0x000000f9 } },
+ { AR5K_RF_GAIN(48), { 0x000000f9, 0x000000f9 } },
+ { AR5K_RF_GAIN(49), { 0x000000f9, 0x000000f9 } },
+ { AR5K_RF_GAIN(50), { 0x000000f9, 0x000000f9 } },
+ { AR5K_RF_GAIN(51), { 0x000000f9, 0x000000f9 } },
+ { AR5K_RF_GAIN(52), { 0x000000f9, 0x000000f9 } },
+ { AR5K_RF_GAIN(53), { 0x000000f9, 0x000000f9 } },
+ { AR5K_RF_GAIN(54), { 0x000000f9, 0x000000f9 } },
+ { AR5K_RF_GAIN(55), { 0x000000f9, 0x000000f9 } },
+ { AR5K_RF_GAIN(56), { 0x000000f9, 0x000000f9 } },
+ { AR5K_RF_GAIN(57), { 0x000000f9, 0x000000f9 } },
+ { AR5K_RF_GAIN(58), { 0x000000f9, 0x000000f9 } },
+ { AR5K_RF_GAIN(59), { 0x000000f9, 0x000000f9 } },
+ { AR5K_RF_GAIN(60), { 0x000000f9, 0x000000f9 } },
+ { AR5K_RF_GAIN(61), { 0x000000f9, 0x000000f9 } },
+ { AR5K_RF_GAIN(62), { 0x000000f9, 0x000000f9 } },
+ { AR5K_RF_GAIN(63), { 0x000000f9, 0x000000f9 } },
+};
+
+
+/* Initial RF Gain settings for RF2425 */
+static const struct ath5k_ini_rfgain rfgain_2425[] = {
+ { AR5K_RF_GAIN(0), { 0x00000000, 0x00000000 } },
+ { AR5K_RF_GAIN(1), { 0x00000000, 0x00000040 } },
+ { AR5K_RF_GAIN(2), { 0x00000000, 0x00000080 } },
+ { AR5K_RF_GAIN(3), { 0x00000000, 0x00000181 } },
+ { AR5K_RF_GAIN(4), { 0x00000000, 0x000001c1 } },
+ { AR5K_RF_GAIN(5), { 0x00000000, 0x00000001 } },
+ { AR5K_RF_GAIN(6), { 0x00000000, 0x00000041 } },
+ { AR5K_RF_GAIN(7), { 0x00000000, 0x00000081 } },
+ { AR5K_RF_GAIN(8), { 0x00000000, 0x00000188 } },
+ { AR5K_RF_GAIN(9), { 0x00000000, 0x000001c8 } },
+ { AR5K_RF_GAIN(10), { 0x00000000, 0x00000008 } },
+ { AR5K_RF_GAIN(11), { 0x00000000, 0x00000048 } },
+ { AR5K_RF_GAIN(12), { 0x00000000, 0x00000088 } },
+ { AR5K_RF_GAIN(13), { 0x00000000, 0x00000189 } },
+ { AR5K_RF_GAIN(14), { 0x00000000, 0x000001c9 } },
+ { AR5K_RF_GAIN(15), { 0x00000000, 0x00000009 } },
+ { AR5K_RF_GAIN(16), { 0x00000000, 0x00000049 } },
+ { AR5K_RF_GAIN(17), { 0x00000000, 0x00000089 } },
+ { AR5K_RF_GAIN(18), { 0x00000000, 0x000001b0 } },
+ { AR5K_RF_GAIN(19), { 0x00000000, 0x000001f0 } },
+ { AR5K_RF_GAIN(20), { 0x00000000, 0x00000030 } },
+ { AR5K_RF_GAIN(21), { 0x00000000, 0x00000070 } },
+ { AR5K_RF_GAIN(22), { 0x00000000, 0x00000171 } },
+ { AR5K_RF_GAIN(23), { 0x00000000, 0x000001b1 } },
+ { AR5K_RF_GAIN(24), { 0x00000000, 0x000001f1 } },
+ { AR5K_RF_GAIN(25), { 0x00000000, 0x00000031 } },
+ { AR5K_RF_GAIN(26), { 0x00000000, 0x00000071 } },
+ { AR5K_RF_GAIN(27), { 0x00000000, 0x000001b8 } },
+ { AR5K_RF_GAIN(28), { 0x00000000, 0x000001f8 } },
+ { AR5K_RF_GAIN(29), { 0x00000000, 0x00000038 } },
+ { AR5K_RF_GAIN(30), { 0x00000000, 0x00000078 } },
+ { AR5K_RF_GAIN(31), { 0x00000000, 0x000000b8 } },
+ { AR5K_RF_GAIN(32), { 0x00000000, 0x000001b9 } },
+ { AR5K_RF_GAIN(33), { 0x00000000, 0x000001f9 } },
+ { AR5K_RF_GAIN(34), { 0x00000000, 0x00000039 } },
+ { AR5K_RF_GAIN(35), { 0x00000000, 0x00000079 } },
+ { AR5K_RF_GAIN(36), { 0x00000000, 0x000000b9 } },
+ { AR5K_RF_GAIN(37), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(38), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(39), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(40), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(41), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(42), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(43), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(44), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(45), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(46), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(47), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(48), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(49), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(50), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(51), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(52), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(53), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(54), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(55), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(56), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(57), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(58), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(59), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(60), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(61), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(62), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(63), { 0x00000000, 0x000000f9 } },
+};
+
+#define AR5K_GAIN_CRN_FIX_BITS_5111 4
+#define AR5K_GAIN_CRN_FIX_BITS_5112 7
+#define AR5K_GAIN_CRN_MAX_FIX_BITS AR5K_GAIN_CRN_FIX_BITS_5112
+#define AR5K_GAIN_DYN_ADJUST_HI_MARGIN 15
+#define AR5K_GAIN_DYN_ADJUST_LO_MARGIN 20
+#define AR5K_GAIN_CCK_PROBE_CORR 5
+#define AR5K_GAIN_CCK_OFDM_GAIN_DELTA 15
+#define AR5K_GAIN_STEP_COUNT 10
+
+/* Check if our current measurement is inside our
+ * current variable attenuation window */
+#define AR5K_GAIN_CHECK_ADJUST(_g) \
+ ((_g)->g_current <= (_g)->g_low || (_g)->g_current >= (_g)->g_high)
+
+/**
+ * struct ath5k_gain_opt_step - An RF gain optimization step
+ * @gos_param: Set of parameters
+ * @gos_gain: Gain
+ */
+struct ath5k_gain_opt_step {
+ s8 gos_param[AR5K_GAIN_CRN_MAX_FIX_BITS];
+ s8 gos_gain;
+};
+
+/**
+ * struct ath5k_gain_opt - RF Gain optimization ladder
+ * @go_default: The default step
+ * @go_steps_count: How many optimization steps
+ * @go_step: Array of &struct ath5k_gain_opt_step
+ */
+struct ath5k_gain_opt {
+ u8 go_default;
+ u8 go_steps_count;
+ const struct ath5k_gain_opt_step go_step[AR5K_GAIN_STEP_COUNT];
+};
+
+
+/*
+ * RF5111
+ * Parameters on gos_param:
+ * 1) Tx clip PHY register
+ * 2) PWD 90 RF register
+ * 3) PWD 84 RF register
+ * 4) RFGainSel RF register
+ */
+static const struct ath5k_gain_opt rfgain_opt_5111 = {
+ 4,
+ 9,
+ {
+ { { 4, 1, 1, 1 }, 6 },
+ { { 4, 0, 1, 1 }, 4 },
+ { { 3, 1, 1, 1 }, 3 },
+ { { 4, 0, 0, 1 }, 1 },
+ { { 4, 1, 1, 0 }, 0 },
+ { { 4, 0, 1, 0 }, -2 },
+ { { 3, 1, 1, 0 }, -3 },
+ { { 4, 0, 0, 0 }, -4 },
+ { { 2, 1, 1, 0 }, -6 }
+ }
+};
+
+/*
+ * RF5112
+ * Parameters on gos_param:
+ * 1) Mixgain ovr RF register
+ * 2) PWD 138 RF register
+ * 3) PWD 137 RF register
+ * 4) PWD 136 RF register
+ * 5) PWD 132 RF register
+ * 6) PWD 131 RF register
+ * 7) PWD 130 RF register
+ */
+static const struct ath5k_gain_opt rfgain_opt_5112 = {
+ 1,
+ 8,
+ {
+ { { 3, 0, 0, 0, 0, 0, 0 }, 6 },
+ { { 2, 0, 0, 0, 0, 0, 0 }, 0 },
+ { { 1, 0, 0, 0, 0, 0, 0 }, -3 },
+ { { 0, 0, 0, 0, 0, 0, 0 }, -6 },
+ { { 0, 1, 1, 0, 0, 0, 0 }, -8 },
+ { { 0, 1, 1, 0, 1, 1, 0 }, -10 },
+ { { 0, 1, 0, 1, 1, 1, 0 }, -13 },
+ { { 0, 1, 0, 1, 1, 0, 1 }, -16 },
+ }
+};
+
diff --git a/drivers/net/wireless/ath/ath5k/rfkill.c b/drivers/net/wireless/ath/ath5k/rfkill.c
new file mode 100644
index 000000000..855ed7fc7
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/rfkill.c
@@ -0,0 +1,115 @@
+/*
+ * RFKILL support for ath5k
+ *
+ * Copyright (c) 2009 Tobias Doerffel <tobias.doerffel@gmail.com>
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
+ * redistribution must be conditioned upon including a substantially
+ * similar Disclaimer requirement for further binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
+ * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
+ * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
+ * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ * THE POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include "ath5k.h"
+
+
+static inline void ath5k_rfkill_disable(struct ath5k_hw *ah)
+{
+ ATH5K_DBG(ah, ATH5K_DEBUG_ANY, "rfkill disable (gpio:%d polarity:%d)\n",
+ ah->rf_kill.gpio, ah->rf_kill.polarity);
+ ath5k_hw_set_gpio_output(ah, ah->rf_kill.gpio);
+ ath5k_hw_set_gpio(ah, ah->rf_kill.gpio, !ah->rf_kill.polarity);
+}
+
+
+static inline void ath5k_rfkill_enable(struct ath5k_hw *ah)
+{
+ ATH5K_DBG(ah, ATH5K_DEBUG_ANY, "rfkill enable (gpio:%d polarity:%d)\n",
+ ah->rf_kill.gpio, ah->rf_kill.polarity);
+ ath5k_hw_set_gpio_output(ah, ah->rf_kill.gpio);
+ ath5k_hw_set_gpio(ah, ah->rf_kill.gpio, ah->rf_kill.polarity);
+}
+
+static inline void ath5k_rfkill_set_intr(struct ath5k_hw *ah, bool enable)
+{
+ u32 curval;
+
+ ath5k_hw_set_gpio_input(ah, ah->rf_kill.gpio);
+ curval = ath5k_hw_get_gpio(ah, ah->rf_kill.gpio);
+ ath5k_hw_set_gpio_intr(ah, ah->rf_kill.gpio, enable ?
+ !!curval : !curval);
+}
+
+static bool
+ath5k_is_rfkill_set(struct ath5k_hw *ah)
+{
+ /* configuring GPIO for input for some reason disables rfkill */
+ /*ath5k_hw_set_gpio_input(ah, ah->rf_kill.gpio);*/
+ return ath5k_hw_get_gpio(ah, ah->rf_kill.gpio) ==
+ ah->rf_kill.polarity;
+}
+
+static void
+ath5k_tasklet_rfkill_toggle(struct tasklet_struct *t)
+{
+ struct ath5k_hw *ah = from_tasklet(ah, t, rf_kill.toggleq);
+ bool blocked;
+
+ blocked = ath5k_is_rfkill_set(ah);
+ wiphy_rfkill_set_hw_state(ah->hw->wiphy, blocked);
+}
+
+
+void
+ath5k_rfkill_hw_start(struct ath5k_hw *ah)
+{
+ /* read rfkill GPIO configuration from EEPROM header */
+ ah->rf_kill.gpio = ah->ah_capabilities.cap_eeprom.ee_rfkill_pin;
+ ah->rf_kill.polarity = ah->ah_capabilities.cap_eeprom.ee_rfkill_pol;
+
+ tasklet_setup(&ah->rf_kill.toggleq, ath5k_tasklet_rfkill_toggle);
+
+ ath5k_rfkill_disable(ah);
+
+ /* enable interrupt for rfkill switch */
+ if (AR5K_EEPROM_HDR_RFKILL(ah->ah_capabilities.cap_eeprom.ee_header))
+ ath5k_rfkill_set_intr(ah, true);
+}
+
+
+void
+ath5k_rfkill_hw_stop(struct ath5k_hw *ah)
+{
+ /* disable interrupt for rfkill switch */
+ if (AR5K_EEPROM_HDR_RFKILL(ah->ah_capabilities.cap_eeprom.ee_header))
+ ath5k_rfkill_set_intr(ah, false);
+
+ tasklet_kill(&ah->rf_kill.toggleq);
+
+ /* enable RFKILL when stopping HW so Wifi LED is turned off */
+ ath5k_rfkill_enable(ah);
+}
+
diff --git a/drivers/net/wireless/ath/ath5k/sysfs.c b/drivers/net/wireless/ath/ath5k/sysfs.c
new file mode 100644
index 000000000..37bf64106
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/sysfs.c
@@ -0,0 +1,123 @@
+// SPDX-License-Identifier: GPL-2.0
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/device.h>
+#include <linux/pci.h>
+
+#include "ath5k.h"
+#include "reg.h"
+
+#define SIMPLE_SHOW_STORE(name, get, set) \
+static ssize_t ath5k_attr_show_##name(struct device *dev, \
+ struct device_attribute *attr, \
+ char *buf) \
+{ \
+ struct ieee80211_hw *hw = dev_get_drvdata(dev); \
+ struct ath5k_hw *ah = hw->priv; \
+ return sysfs_emit(buf, "%d\n", get); \
+} \
+ \
+static ssize_t ath5k_attr_store_##name(struct device *dev, \
+ struct device_attribute *attr, \
+ const char *buf, size_t count) \
+{ \
+ struct ieee80211_hw *hw = dev_get_drvdata(dev); \
+ struct ath5k_hw *ah = hw->priv; \
+ int val, ret; \
+ \
+ ret = kstrtoint(buf, 10, &val); \
+ if (ret < 0) \
+ return ret; \
+ set(ah, val); \
+ return count; \
+} \
+static DEVICE_ATTR(name, 0644, \
+ ath5k_attr_show_##name, ath5k_attr_store_##name)
+
+#define SIMPLE_SHOW(name, get) \
+static ssize_t ath5k_attr_show_##name(struct device *dev, \
+ struct device_attribute *attr, \
+ char *buf) \
+{ \
+ struct ieee80211_hw *hw = dev_get_drvdata(dev); \
+ struct ath5k_hw *ah = hw->priv; \
+ return sysfs_emit(buf, "%d\n", get); \
+} \
+static DEVICE_ATTR(name, 0444, ath5k_attr_show_##name, NULL)
+
+/*** ANI ***/
+
+SIMPLE_SHOW_STORE(ani_mode, ah->ani_state.ani_mode, ath5k_ani_init);
+SIMPLE_SHOW_STORE(noise_immunity_level, ah->ani_state.noise_imm_level,
+ ath5k_ani_set_noise_immunity_level);
+SIMPLE_SHOW_STORE(spur_level, ah->ani_state.spur_level,
+ ath5k_ani_set_spur_immunity_level);
+SIMPLE_SHOW_STORE(firstep_level, ah->ani_state.firstep_level,
+ ath5k_ani_set_firstep_level);
+SIMPLE_SHOW_STORE(ofdm_weak_signal_detection, ah->ani_state.ofdm_weak_sig,
+ ath5k_ani_set_ofdm_weak_signal_detection);
+SIMPLE_SHOW_STORE(cck_weak_signal_detection, ah->ani_state.cck_weak_sig,
+ ath5k_ani_set_cck_weak_signal_detection);
+SIMPLE_SHOW(spur_level_max, ah->ani_state.max_spur_level);
+
+static ssize_t ath5k_attr_show_noise_immunity_level_max(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return sysfs_emit(buf, "%d\n", ATH5K_ANI_MAX_NOISE_IMM_LVL);
+}
+static DEVICE_ATTR(noise_immunity_level_max, 0444,
+ ath5k_attr_show_noise_immunity_level_max, NULL);
+
+static ssize_t ath5k_attr_show_firstep_level_max(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return sysfs_emit(buf, "%d\n", ATH5K_ANI_MAX_FIRSTEP_LVL);
+}
+static DEVICE_ATTR(firstep_level_max, 0444,
+ ath5k_attr_show_firstep_level_max, NULL);
+
+static struct attribute *ath5k_sysfs_entries_ani[] = {
+ &dev_attr_ani_mode.attr,
+ &dev_attr_noise_immunity_level.attr,
+ &dev_attr_spur_level.attr,
+ &dev_attr_firstep_level.attr,
+ &dev_attr_ofdm_weak_signal_detection.attr,
+ &dev_attr_cck_weak_signal_detection.attr,
+ &dev_attr_noise_immunity_level_max.attr,
+ &dev_attr_spur_level_max.attr,
+ &dev_attr_firstep_level_max.attr,
+ NULL
+};
+
+static struct attribute_group ath5k_attribute_group_ani = {
+ .name = "ani",
+ .attrs = ath5k_sysfs_entries_ani,
+};
+
+
+/*** register / unregister ***/
+
+int
+ath5k_sysfs_register(struct ath5k_hw *ah)
+{
+ struct device *dev = ah->dev;
+ int err;
+
+ err = sysfs_create_group(&dev->kobj, &ath5k_attribute_group_ani);
+ if (err) {
+ ATH5K_ERR(ah, "failed to create sysfs group\n");
+ return err;
+ }
+
+ return 0;
+}
+
+void
+ath5k_sysfs_unregister(struct ath5k_hw *ah)
+{
+ struct device *dev = ah->dev;
+
+ sysfs_remove_group(&dev->kobj, &ath5k_attribute_group_ani);
+}
diff --git a/drivers/net/wireless/ath/ath5k/trace.h b/drivers/net/wireless/ath/ath5k/trace.h
new file mode 100644
index 000000000..a41e3bf42
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/trace.h
@@ -0,0 +1,107 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#if !defined(__TRACE_ATH5K_H) || defined(TRACE_HEADER_MULTI_READ)
+#define __TRACE_ATH5K_H
+
+#include <linux/tracepoint.h>
+
+
+#if !defined(CONFIG_ATH5K_TRACER) || defined(__CHECKER__)
+#undef TRACE_EVENT
+#define TRACE_EVENT(name, proto, ...) \
+static inline void trace_ ## name(proto) {}
+#endif
+
+struct sk_buff;
+struct ath5k_txq;
+struct ath5k_tx_status;
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM ath5k
+
+TRACE_EVENT(ath5k_rx,
+ TP_PROTO(struct ath5k_hw *priv, struct sk_buff *skb),
+ TP_ARGS(priv, skb),
+ TP_STRUCT__entry(
+ __field(struct ath5k_hw *, priv)
+ __field(unsigned long, skbaddr)
+ __dynamic_array(u8, frame, skb->len)
+ ),
+ TP_fast_assign(
+ __entry->priv = priv;
+ __entry->skbaddr = (unsigned long) skb;
+ memcpy(__get_dynamic_array(frame), skb->data, skb->len);
+ ),
+ TP_printk(
+ "[%p] RX skb=%lx", __entry->priv, __entry->skbaddr
+ )
+);
+
+TRACE_EVENT(ath5k_tx,
+ TP_PROTO(struct ath5k_hw *priv, struct sk_buff *skb,
+ struct ath5k_txq *q),
+
+ TP_ARGS(priv, skb, q),
+
+ TP_STRUCT__entry(
+ __field(struct ath5k_hw *, priv)
+ __field(unsigned long, skbaddr)
+ __field(u8, qnum)
+ __dynamic_array(u8, frame, skb->len)
+ ),
+
+ TP_fast_assign(
+ __entry->priv = priv;
+ __entry->skbaddr = (unsigned long) skb;
+ __entry->qnum = (u8) q->qnum;
+ memcpy(__get_dynamic_array(frame), skb->data, skb->len);
+ ),
+
+ TP_printk(
+ "[%p] TX skb=%lx q=%d", __entry->priv, __entry->skbaddr,
+ __entry->qnum
+ )
+);
+
+TRACE_EVENT(ath5k_tx_complete,
+ TP_PROTO(struct ath5k_hw *priv, struct sk_buff *skb,
+ struct ath5k_txq *q, struct ath5k_tx_status *ts),
+
+ TP_ARGS(priv, skb, q, ts),
+
+ TP_STRUCT__entry(
+ __field(struct ath5k_hw *, priv)
+ __field(unsigned long, skbaddr)
+ __field(u8, qnum)
+ __field(u8, ts_status)
+ __field(s8, ts_rssi)
+ __field(u8, ts_antenna)
+ ),
+
+ TP_fast_assign(
+ __entry->priv = priv;
+ __entry->skbaddr = (unsigned long) skb;
+ __entry->qnum = (u8) q->qnum;
+ __entry->ts_status = ts->ts_status;
+ __entry->ts_rssi = ts->ts_rssi;
+ __entry->ts_antenna = ts->ts_antenna;
+ ),
+
+ TP_printk(
+ "[%p] TX end skb=%lx q=%d stat=%x rssi=%d ant=%x",
+ __entry->priv, __entry->skbaddr, __entry->qnum,
+ __entry->ts_status, __entry->ts_rssi, __entry->ts_antenna
+ )
+);
+
+#endif /* __TRACE_ATH5K_H */
+
+#if defined(CONFIG_ATH5K_TRACER) && !defined(__CHECKER__)
+
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE trace
+
+#include <trace/define_trace.h>
+
+#endif