summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/ralink/rt2x00/rt2x00dev.c')
-rw-r--r--drivers/net/wireless/ralink/rt2x00/rt2x00dev.c1633
1 files changed, 1633 insertions, 0 deletions
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
new file mode 100644
index 000000000..9a9cfd0ce
--- /dev/null
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
@@ -0,0 +1,1633 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ Copyright (C) 2010 Willow Garage <http://www.willowgarage.com>
+ Copyright (C) 2004 - 2010 Ivo van Doorn <IvDoorn@gmail.com>
+ <http://rt2x00.serialmonkey.com>
+
+ */
+
+/*
+ Module: rt2x00lib
+ Abstract: rt2x00 generic device routines.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/log2.h>
+#include <linux/of.h>
+#include <linux/of_net.h>
+
+#include "rt2x00.h"
+#include "rt2x00lib.h"
+
+/*
+ * Utility functions.
+ */
+u32 rt2x00lib_get_bssidx(struct rt2x00_dev *rt2x00dev,
+ struct ieee80211_vif *vif)
+{
+ /*
+ * When in STA mode, bssidx is always 0 otherwise local_address[5]
+ * contains the bss number, see BSS_ID_MASK comments for details.
+ */
+ if (rt2x00dev->intf_sta_count)
+ return 0;
+ return vif->addr[5] & (rt2x00dev->ops->max_ap_intf - 1);
+}
+EXPORT_SYMBOL_GPL(rt2x00lib_get_bssidx);
+
+/*
+ * Radio control handlers.
+ */
+int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev)
+{
+ int status;
+
+ /*
+ * Don't enable the radio twice.
+ * And check if the hardware button has been disabled.
+ */
+ if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
+ return 0;
+
+ /*
+ * Initialize all data queues.
+ */
+ rt2x00queue_init_queues(rt2x00dev);
+
+ /*
+ * Enable radio.
+ */
+ status =
+ rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_ON);
+ if (status)
+ return status;
+
+ rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_IRQ_ON);
+
+ rt2x00leds_led_radio(rt2x00dev, true);
+ rt2x00led_led_activity(rt2x00dev, true);
+
+ set_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags);
+
+ /*
+ * Enable queues.
+ */
+ rt2x00queue_start_queues(rt2x00dev);
+ rt2x00link_start_tuner(rt2x00dev);
+
+ /*
+ * Start watchdog monitoring.
+ */
+ rt2x00link_start_watchdog(rt2x00dev);
+
+ return 0;
+}
+
+void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev)
+{
+ if (!test_and_clear_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
+ return;
+
+ /*
+ * Stop watchdog monitoring.
+ */
+ rt2x00link_stop_watchdog(rt2x00dev);
+
+ /*
+ * Stop all queues
+ */
+ rt2x00link_stop_tuner(rt2x00dev);
+ rt2x00queue_stop_queues(rt2x00dev);
+ rt2x00queue_flush_queues(rt2x00dev, true);
+
+ /*
+ * Disable radio.
+ */
+ rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_OFF);
+ rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_IRQ_OFF);
+ rt2x00led_led_activity(rt2x00dev, false);
+ rt2x00leds_led_radio(rt2x00dev, false);
+}
+
+static void rt2x00lib_intf_scheduled_iter(void *data, u8 *mac,
+ struct ieee80211_vif *vif)
+{
+ struct rt2x00_dev *rt2x00dev = data;
+ struct rt2x00_intf *intf = vif_to_intf(vif);
+
+ /*
+ * It is possible the radio was disabled while the work had been
+ * scheduled. If that happens we should return here immediately,
+ * note that in the spinlock protected area above the delayed_flags
+ * have been cleared correctly.
+ */
+ if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
+ return;
+
+ if (test_and_clear_bit(DELAYED_UPDATE_BEACON, &intf->delayed_flags)) {
+ mutex_lock(&intf->beacon_skb_mutex);
+ rt2x00queue_update_beacon(rt2x00dev, vif);
+ mutex_unlock(&intf->beacon_skb_mutex);
+ }
+}
+
+static void rt2x00lib_intf_scheduled(struct work_struct *work)
+{
+ struct rt2x00_dev *rt2x00dev =
+ container_of(work, struct rt2x00_dev, intf_work);
+
+ /*
+ * Iterate over each interface and perform the
+ * requested configurations.
+ */
+ ieee80211_iterate_active_interfaces(rt2x00dev->hw,
+ IEEE80211_IFACE_ITER_RESUME_ALL,
+ rt2x00lib_intf_scheduled_iter,
+ rt2x00dev);
+}
+
+static void rt2x00lib_autowakeup(struct work_struct *work)
+{
+ struct rt2x00_dev *rt2x00dev =
+ container_of(work, struct rt2x00_dev, autowakeup_work.work);
+
+ if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
+ return;
+
+ if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE))
+ rt2x00_err(rt2x00dev, "Device failed to wakeup\n");
+ clear_bit(CONFIG_POWERSAVING, &rt2x00dev->flags);
+}
+
+/*
+ * Interrupt context handlers.
+ */
+static void rt2x00lib_bc_buffer_iter(void *data, u8 *mac,
+ struct ieee80211_vif *vif)
+{
+ struct ieee80211_tx_control control = {};
+ struct rt2x00_dev *rt2x00dev = data;
+ struct sk_buff *skb;
+
+ /*
+ * Only AP mode interfaces do broad- and multicast buffering
+ */
+ if (vif->type != NL80211_IFTYPE_AP)
+ return;
+
+ /*
+ * Send out buffered broad- and multicast frames
+ */
+ skb = ieee80211_get_buffered_bc(rt2x00dev->hw, vif);
+ while (skb) {
+ rt2x00mac_tx(rt2x00dev->hw, &control, skb);
+ skb = ieee80211_get_buffered_bc(rt2x00dev->hw, vif);
+ }
+}
+
+static void rt2x00lib_beaconupdate_iter(void *data, u8 *mac,
+ struct ieee80211_vif *vif)
+{
+ struct rt2x00_dev *rt2x00dev = data;
+
+ if (vif->type != NL80211_IFTYPE_AP &&
+ vif->type != NL80211_IFTYPE_ADHOC &&
+ vif->type != NL80211_IFTYPE_MESH_POINT)
+ return;
+
+ /*
+ * Update the beacon without locking. This is safe on PCI devices
+ * as they only update the beacon periodically here. This should
+ * never be called for USB devices.
+ */
+ WARN_ON(rt2x00_is_usb(rt2x00dev));
+ rt2x00queue_update_beacon(rt2x00dev, vif);
+}
+
+void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev)
+{
+ if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
+ return;
+
+ /* send buffered bc/mc frames out for every bssid */
+ ieee80211_iterate_active_interfaces_atomic(
+ rt2x00dev->hw, IEEE80211_IFACE_ITER_RESUME_ALL,
+ rt2x00lib_bc_buffer_iter, rt2x00dev);
+ /*
+ * Devices with pre tbtt interrupt don't need to update the beacon
+ * here as they will fetch the next beacon directly prior to
+ * transmission.
+ */
+ if (rt2x00_has_cap_pre_tbtt_interrupt(rt2x00dev))
+ return;
+
+ /* fetch next beacon */
+ ieee80211_iterate_active_interfaces_atomic(
+ rt2x00dev->hw, IEEE80211_IFACE_ITER_RESUME_ALL,
+ rt2x00lib_beaconupdate_iter, rt2x00dev);
+}
+EXPORT_SYMBOL_GPL(rt2x00lib_beacondone);
+
+void rt2x00lib_pretbtt(struct rt2x00_dev *rt2x00dev)
+{
+ if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
+ return;
+
+ /* fetch next beacon */
+ ieee80211_iterate_active_interfaces_atomic(
+ rt2x00dev->hw, IEEE80211_IFACE_ITER_RESUME_ALL,
+ rt2x00lib_beaconupdate_iter, rt2x00dev);
+}
+EXPORT_SYMBOL_GPL(rt2x00lib_pretbtt);
+
+void rt2x00lib_dmastart(struct queue_entry *entry)
+{
+ set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
+ rt2x00queue_index_inc(entry, Q_INDEX);
+}
+EXPORT_SYMBOL_GPL(rt2x00lib_dmastart);
+
+void rt2x00lib_dmadone(struct queue_entry *entry)
+{
+ set_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags);
+ clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
+ rt2x00queue_index_inc(entry, Q_INDEX_DMA_DONE);
+}
+EXPORT_SYMBOL_GPL(rt2x00lib_dmadone);
+
+static inline int rt2x00lib_txdone_bar_status(struct queue_entry *entry)
+{
+ struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
+ struct ieee80211_bar *bar = (void *) entry->skb->data;
+ struct rt2x00_bar_list_entry *bar_entry;
+ int ret;
+
+ if (likely(!ieee80211_is_back_req(bar->frame_control)))
+ return 0;
+
+ /*
+ * Unlike all other frames, the status report for BARs does
+ * not directly come from the hardware as it is incapable of
+ * matching a BA to a previously send BAR. The hardware will
+ * report all BARs as if they weren't acked at all.
+ *
+ * Instead the RX-path will scan for incoming BAs and set the
+ * block_acked flag if it sees one that was likely caused by
+ * a BAR from us.
+ *
+ * Remove remaining BARs here and return their status for
+ * TX done processing.
+ */
+ ret = 0;
+ rcu_read_lock();
+ list_for_each_entry_rcu(bar_entry, &rt2x00dev->bar_list, list) {
+ if (bar_entry->entry != entry)
+ continue;
+
+ spin_lock_bh(&rt2x00dev->bar_list_lock);
+ /* Return whether this BAR was blockacked or not */
+ ret = bar_entry->block_acked;
+ /* Remove the BAR from our checklist */
+ list_del_rcu(&bar_entry->list);
+ spin_unlock_bh(&rt2x00dev->bar_list_lock);
+ kfree_rcu(bar_entry, head);
+
+ break;
+ }
+ rcu_read_unlock();
+
+ return ret;
+}
+
+static void rt2x00lib_fill_tx_status(struct rt2x00_dev *rt2x00dev,
+ struct ieee80211_tx_info *tx_info,
+ struct skb_frame_desc *skbdesc,
+ struct txdone_entry_desc *txdesc,
+ bool success)
+{
+ u8 rate_idx, rate_flags, retry_rates;
+ int i;
+
+ rate_idx = skbdesc->tx_rate_idx;
+ rate_flags = skbdesc->tx_rate_flags;
+ retry_rates = test_bit(TXDONE_FALLBACK, &txdesc->flags) ?
+ (txdesc->retry + 1) : 1;
+
+ /*
+ * Initialize TX status
+ */
+ memset(&tx_info->status, 0, sizeof(tx_info->status));
+ tx_info->status.ack_signal = 0;
+
+ /*
+ * Frame was send with retries, hardware tried
+ * different rates to send out the frame, at each
+ * retry it lowered the rate 1 step except when the
+ * lowest rate was used.
+ */
+ for (i = 0; i < retry_rates && i < IEEE80211_TX_MAX_RATES; i++) {
+ tx_info->status.rates[i].idx = rate_idx - i;
+ tx_info->status.rates[i].flags = rate_flags;
+
+ if (rate_idx - i == 0) {
+ /*
+ * The lowest rate (index 0) was used until the
+ * number of max retries was reached.
+ */
+ tx_info->status.rates[i].count = retry_rates - i;
+ i++;
+ break;
+ }
+ tx_info->status.rates[i].count = 1;
+ }
+ if (i < (IEEE80211_TX_MAX_RATES - 1))
+ tx_info->status.rates[i].idx = -1; /* terminate */
+
+ if (test_bit(TXDONE_NO_ACK_REQ, &txdesc->flags))
+ tx_info->flags |= IEEE80211_TX_CTL_NO_ACK;
+
+ if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) {
+ if (success)
+ tx_info->flags |= IEEE80211_TX_STAT_ACK;
+ else
+ rt2x00dev->low_level_stats.dot11ACKFailureCount++;
+ }
+
+ /*
+ * Every single frame has it's own tx status, hence report
+ * every frame as ampdu of size 1.
+ *
+ * TODO: if we can find out how many frames were aggregated
+ * by the hw we could provide the real ampdu_len to mac80211
+ * which would allow the rc algorithm to better decide on
+ * which rates are suitable.
+ */
+ if (test_bit(TXDONE_AMPDU, &txdesc->flags) ||
+ tx_info->flags & IEEE80211_TX_CTL_AMPDU) {
+ tx_info->flags |= IEEE80211_TX_STAT_AMPDU |
+ IEEE80211_TX_CTL_AMPDU;
+ tx_info->status.ampdu_len = 1;
+ tx_info->status.ampdu_ack_len = success ? 1 : 0;
+ }
+
+ if (rate_flags & IEEE80211_TX_RC_USE_RTS_CTS) {
+ if (success)
+ rt2x00dev->low_level_stats.dot11RTSSuccessCount++;
+ else
+ rt2x00dev->low_level_stats.dot11RTSFailureCount++;
+ }
+}
+
+static void rt2x00lib_clear_entry(struct rt2x00_dev *rt2x00dev,
+ struct queue_entry *entry)
+{
+ /*
+ * Make this entry available for reuse.
+ */
+ entry->skb = NULL;
+ entry->flags = 0;
+
+ rt2x00dev->ops->lib->clear_entry(entry);
+
+ rt2x00queue_index_inc(entry, Q_INDEX_DONE);
+
+ /*
+ * If the data queue was below the threshold before the txdone
+ * handler we must make sure the packet queue in the mac80211 stack
+ * is reenabled when the txdone handler has finished. This has to be
+ * serialized with rt2x00mac_tx(), otherwise we can wake up queue
+ * before it was stopped.
+ */
+ spin_lock_bh(&entry->queue->tx_lock);
+ if (!rt2x00queue_threshold(entry->queue))
+ rt2x00queue_unpause_queue(entry->queue);
+ spin_unlock_bh(&entry->queue->tx_lock);
+}
+
+void rt2x00lib_txdone_nomatch(struct queue_entry *entry,
+ struct txdone_entry_desc *txdesc)
+{
+ struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
+ struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
+ struct ieee80211_tx_info txinfo = {};
+ bool success;
+
+ /*
+ * Unmap the skb.
+ */
+ rt2x00queue_unmap_skb(entry);
+
+ /*
+ * Signal that the TX descriptor is no longer in the skb.
+ */
+ skbdesc->flags &= ~SKBDESC_DESC_IN_SKB;
+
+ /*
+ * Send frame to debugfs immediately, after this call is completed
+ * we are going to overwrite the skb->cb array.
+ */
+ rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_TXDONE, entry);
+
+ /*
+ * Determine if the frame has been successfully transmitted and
+ * remove BARs from our check list while checking for their
+ * TX status.
+ */
+ success =
+ rt2x00lib_txdone_bar_status(entry) ||
+ test_bit(TXDONE_SUCCESS, &txdesc->flags);
+
+ if (!test_bit(TXDONE_UNKNOWN, &txdesc->flags)) {
+ /*
+ * Update TX statistics.
+ */
+ rt2x00dev->link.qual.tx_success += success;
+ rt2x00dev->link.qual.tx_failed += !success;
+
+ rt2x00lib_fill_tx_status(rt2x00dev, &txinfo, skbdesc, txdesc,
+ success);
+ ieee80211_tx_status_noskb(rt2x00dev->hw, skbdesc->sta, &txinfo);
+ }
+
+ dev_kfree_skb_any(entry->skb);
+ rt2x00lib_clear_entry(rt2x00dev, entry);
+}
+EXPORT_SYMBOL_GPL(rt2x00lib_txdone_nomatch);
+
+void rt2x00lib_txdone(struct queue_entry *entry,
+ struct txdone_entry_desc *txdesc)
+{
+ struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
+ struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
+ struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
+ u8 skbdesc_flags = skbdesc->flags;
+ unsigned int header_length;
+ bool success;
+
+ /*
+ * Unmap the skb.
+ */
+ rt2x00queue_unmap_skb(entry);
+
+ /*
+ * Remove the extra tx headroom from the skb.
+ */
+ skb_pull(entry->skb, rt2x00dev->extra_tx_headroom);
+
+ /*
+ * Signal that the TX descriptor is no longer in the skb.
+ */
+ skbdesc->flags &= ~SKBDESC_DESC_IN_SKB;
+
+ /*
+ * Determine the length of 802.11 header.
+ */
+ header_length = ieee80211_get_hdrlen_from_skb(entry->skb);
+
+ /*
+ * Remove L2 padding which was added during
+ */
+ if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_L2PAD))
+ rt2x00queue_remove_l2pad(entry->skb, header_length);
+
+ /*
+ * If the IV/EIV data was stripped from the frame before it was
+ * passed to the hardware, we should now reinsert it again because
+ * mac80211 will expect the same data to be present it the
+ * frame as it was passed to us.
+ */
+ if (rt2x00_has_cap_hw_crypto(rt2x00dev))
+ rt2x00crypto_tx_insert_iv(entry->skb, header_length);
+
+ /*
+ * Send frame to debugfs immediately, after this call is completed
+ * we are going to overwrite the skb->cb array.
+ */
+ rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_TXDONE, entry);
+
+ /*
+ * Determine if the frame has been successfully transmitted and
+ * remove BARs from our check list while checking for their
+ * TX status.
+ */
+ success =
+ rt2x00lib_txdone_bar_status(entry) ||
+ test_bit(TXDONE_SUCCESS, &txdesc->flags) ||
+ test_bit(TXDONE_UNKNOWN, &txdesc->flags);
+
+ /*
+ * Update TX statistics.
+ */
+ rt2x00dev->link.qual.tx_success += success;
+ rt2x00dev->link.qual.tx_failed += !success;
+
+ rt2x00lib_fill_tx_status(rt2x00dev, tx_info, skbdesc, txdesc, success);
+
+ /*
+ * Only send the status report to mac80211 when it's a frame
+ * that originated in mac80211. If this was a extra frame coming
+ * through a mac80211 library call (RTS/CTS) then we should not
+ * send the status report back.
+ */
+ if (!(skbdesc_flags & SKBDESC_NOT_MAC80211)) {
+ if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_TASKLET_CONTEXT))
+ ieee80211_tx_status(rt2x00dev->hw, entry->skb);
+ else
+ ieee80211_tx_status_ni(rt2x00dev->hw, entry->skb);
+ } else {
+ dev_kfree_skb_any(entry->skb);
+ }
+
+ rt2x00lib_clear_entry(rt2x00dev, entry);
+}
+EXPORT_SYMBOL_GPL(rt2x00lib_txdone);
+
+void rt2x00lib_txdone_noinfo(struct queue_entry *entry, u32 status)
+{
+ struct txdone_entry_desc txdesc;
+
+ txdesc.flags = 0;
+ __set_bit(status, &txdesc.flags);
+ txdesc.retry = 0;
+
+ rt2x00lib_txdone(entry, &txdesc);
+}
+EXPORT_SYMBOL_GPL(rt2x00lib_txdone_noinfo);
+
+static u8 *rt2x00lib_find_ie(u8 *data, unsigned int len, u8 ie)
+{
+ struct ieee80211_mgmt *mgmt = (void *)data;
+ u8 *pos, *end;
+
+ pos = (u8 *)mgmt->u.beacon.variable;
+ end = data + len;
+ while (pos < end) {
+ if (pos + 2 + pos[1] > end)
+ return NULL;
+
+ if (pos[0] == ie)
+ return pos;
+
+ pos += 2 + pos[1];
+ }
+
+ return NULL;
+}
+
+static void rt2x00lib_sleep(struct work_struct *work)
+{
+ struct rt2x00_dev *rt2x00dev =
+ container_of(work, struct rt2x00_dev, sleep_work);
+
+ if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
+ return;
+
+ /*
+ * Check again is powersaving is enabled, to prevent races from delayed
+ * work execution.
+ */
+ if (!test_bit(CONFIG_POWERSAVING, &rt2x00dev->flags))
+ rt2x00lib_config(rt2x00dev, &rt2x00dev->hw->conf,
+ IEEE80211_CONF_CHANGE_PS);
+}
+
+static void rt2x00lib_rxdone_check_ba(struct rt2x00_dev *rt2x00dev,
+ struct sk_buff *skb,
+ struct rxdone_entry_desc *rxdesc)
+{
+ struct rt2x00_bar_list_entry *entry;
+ struct ieee80211_bar *ba = (void *)skb->data;
+
+ if (likely(!ieee80211_is_back(ba->frame_control)))
+ return;
+
+ if (rxdesc->size < sizeof(*ba) + FCS_LEN)
+ return;
+
+ rcu_read_lock();
+ list_for_each_entry_rcu(entry, &rt2x00dev->bar_list, list) {
+
+ if (ba->start_seq_num != entry->start_seq_num)
+ continue;
+
+#define TID_CHECK(a, b) ( \
+ ((a) & cpu_to_le16(IEEE80211_BAR_CTRL_TID_INFO_MASK)) == \
+ ((b) & cpu_to_le16(IEEE80211_BAR_CTRL_TID_INFO_MASK))) \
+
+ if (!TID_CHECK(ba->control, entry->control))
+ continue;
+
+#undef TID_CHECK
+
+ if (!ether_addr_equal_64bits(ba->ra, entry->ta))
+ continue;
+
+ if (!ether_addr_equal_64bits(ba->ta, entry->ra))
+ continue;
+
+ /* Mark BAR since we received the according BA */
+ spin_lock_bh(&rt2x00dev->bar_list_lock);
+ entry->block_acked = 1;
+ spin_unlock_bh(&rt2x00dev->bar_list_lock);
+ break;
+ }
+ rcu_read_unlock();
+
+}
+
+static void rt2x00lib_rxdone_check_ps(struct rt2x00_dev *rt2x00dev,
+ struct sk_buff *skb,
+ struct rxdone_entry_desc *rxdesc)
+{
+ struct ieee80211_hdr *hdr = (void *) skb->data;
+ struct ieee80211_tim_ie *tim_ie;
+ u8 *tim;
+ u8 tim_len;
+ bool cam;
+
+ /* If this is not a beacon, or if mac80211 has no powersaving
+ * configured, or if the device is already in powersaving mode
+ * we can exit now. */
+ if (likely(!ieee80211_is_beacon(hdr->frame_control) ||
+ !(rt2x00dev->hw->conf.flags & IEEE80211_CONF_PS)))
+ return;
+
+ /* min. beacon length + FCS_LEN */
+ if (skb->len <= 40 + FCS_LEN)
+ return;
+
+ /* and only beacons from the associated BSSID, please */
+ if (!(rxdesc->dev_flags & RXDONE_MY_BSS) ||
+ !rt2x00dev->aid)
+ return;
+
+ rt2x00dev->last_beacon = jiffies;
+
+ tim = rt2x00lib_find_ie(skb->data, skb->len - FCS_LEN, WLAN_EID_TIM);
+ if (!tim)
+ return;
+
+ if (tim[1] < sizeof(*tim_ie))
+ return;
+
+ tim_len = tim[1];
+ tim_ie = (struct ieee80211_tim_ie *) &tim[2];
+
+ /* Check whenever the PHY can be turned off again. */
+
+ /* 1. What about buffered unicast traffic for our AID? */
+ cam = ieee80211_check_tim(tim_ie, tim_len, rt2x00dev->aid);
+
+ /* 2. Maybe the AP wants to send multicast/broadcast data? */
+ cam |= (tim_ie->bitmap_ctrl & 0x01);
+
+ if (!cam && !test_bit(CONFIG_POWERSAVING, &rt2x00dev->flags))
+ queue_work(rt2x00dev->workqueue, &rt2x00dev->sleep_work);
+}
+
+static int rt2x00lib_rxdone_read_signal(struct rt2x00_dev *rt2x00dev,
+ struct rxdone_entry_desc *rxdesc)
+{
+ struct ieee80211_supported_band *sband;
+ const struct rt2x00_rate *rate;
+ unsigned int i;
+ int signal = rxdesc->signal;
+ int type = (rxdesc->dev_flags & RXDONE_SIGNAL_MASK);
+
+ switch (rxdesc->rate_mode) {
+ case RATE_MODE_CCK:
+ case RATE_MODE_OFDM:
+ /*
+ * For non-HT rates the MCS value needs to contain the
+ * actually used rate modulation (CCK or OFDM).
+ */
+ if (rxdesc->dev_flags & RXDONE_SIGNAL_MCS)
+ signal = RATE_MCS(rxdesc->rate_mode, signal);
+
+ sband = &rt2x00dev->bands[rt2x00dev->curr_band];
+ for (i = 0; i < sband->n_bitrates; i++) {
+ rate = rt2x00_get_rate(sband->bitrates[i].hw_value);
+ if (((type == RXDONE_SIGNAL_PLCP) &&
+ (rate->plcp == signal)) ||
+ ((type == RXDONE_SIGNAL_BITRATE) &&
+ (rate->bitrate == signal)) ||
+ ((type == RXDONE_SIGNAL_MCS) &&
+ (rate->mcs == signal))) {
+ return i;
+ }
+ }
+ break;
+ case RATE_MODE_HT_MIX:
+ case RATE_MODE_HT_GREENFIELD:
+ if (signal >= 0 && signal <= 76)
+ return signal;
+ break;
+ default:
+ break;
+ }
+
+ rt2x00_warn(rt2x00dev, "Frame received with unrecognized signal, mode=0x%.4x, signal=0x%.4x, type=%d\n",
+ rxdesc->rate_mode, signal, type);
+ return 0;
+}
+
+void rt2x00lib_rxdone(struct queue_entry *entry, gfp_t gfp)
+{
+ struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
+ struct rxdone_entry_desc rxdesc;
+ struct sk_buff *skb;
+ struct ieee80211_rx_status *rx_status;
+ unsigned int header_length;
+ int rate_idx;
+
+ if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) ||
+ !test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
+ goto submit_entry;
+
+ if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags))
+ goto submit_entry;
+
+ /*
+ * Allocate a new sk_buffer. If no new buffer available, drop the
+ * received frame and reuse the existing buffer.
+ */
+ skb = rt2x00queue_alloc_rxskb(entry, gfp);
+ if (!skb)
+ goto submit_entry;
+
+ /*
+ * Unmap the skb.
+ */
+ rt2x00queue_unmap_skb(entry);
+
+ /*
+ * Extract the RXD details.
+ */
+ memset(&rxdesc, 0, sizeof(rxdesc));
+ rt2x00dev->ops->lib->fill_rxdone(entry, &rxdesc);
+
+ /*
+ * Check for valid size in case we get corrupted descriptor from
+ * hardware.
+ */
+ if (unlikely(rxdesc.size == 0 ||
+ rxdesc.size > entry->queue->data_size)) {
+ rt2x00_err(rt2x00dev, "Wrong frame size %d max %d\n",
+ rxdesc.size, entry->queue->data_size);
+ dev_kfree_skb(entry->skb);
+ goto renew_skb;
+ }
+
+ /*
+ * The data behind the ieee80211 header must be
+ * aligned on a 4 byte boundary.
+ */
+ header_length = ieee80211_get_hdrlen_from_skb(entry->skb);
+
+ /*
+ * Hardware might have stripped the IV/EIV/ICV data,
+ * in that case it is possible that the data was
+ * provided separately (through hardware descriptor)
+ * in which case we should reinsert the data into the frame.
+ */
+ if ((rxdesc.dev_flags & RXDONE_CRYPTO_IV) &&
+ (rxdesc.flags & RX_FLAG_IV_STRIPPED))
+ rt2x00crypto_rx_insert_iv(entry->skb, header_length,
+ &rxdesc);
+ else if (header_length &&
+ (rxdesc.size > header_length) &&
+ (rxdesc.dev_flags & RXDONE_L2PAD))
+ rt2x00queue_remove_l2pad(entry->skb, header_length);
+
+ /* Trim buffer to correct size */
+ skb_trim(entry->skb, rxdesc.size);
+
+ /*
+ * Translate the signal to the correct bitrate index.
+ */
+ rate_idx = rt2x00lib_rxdone_read_signal(rt2x00dev, &rxdesc);
+ if (rxdesc.rate_mode == RATE_MODE_HT_MIX ||
+ rxdesc.rate_mode == RATE_MODE_HT_GREENFIELD)
+ rxdesc.encoding = RX_ENC_HT;
+
+ /*
+ * Check if this is a beacon, and more frames have been
+ * buffered while we were in powersaving mode.
+ */
+ rt2x00lib_rxdone_check_ps(rt2x00dev, entry->skb, &rxdesc);
+
+ /*
+ * Check for incoming BlockAcks to match to the BlockAckReqs
+ * we've send out.
+ */
+ rt2x00lib_rxdone_check_ba(rt2x00dev, entry->skb, &rxdesc);
+
+ /*
+ * Update extra components
+ */
+ rt2x00link_update_stats(rt2x00dev, entry->skb, &rxdesc);
+ rt2x00debug_update_crypto(rt2x00dev, &rxdesc);
+ rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_RXDONE, entry);
+
+ /*
+ * Initialize RX status information, and send frame
+ * to mac80211.
+ */
+ rx_status = IEEE80211_SKB_RXCB(entry->skb);
+
+ /* Ensure that all fields of rx_status are initialized
+ * properly. The skb->cb array was used for driver
+ * specific informations, so rx_status might contain
+ * garbage.
+ */
+ memset(rx_status, 0, sizeof(*rx_status));
+
+ rx_status->mactime = rxdesc.timestamp;
+ rx_status->band = rt2x00dev->curr_band;
+ rx_status->freq = rt2x00dev->curr_freq;
+ rx_status->rate_idx = rate_idx;
+ rx_status->signal = rxdesc.rssi;
+ rx_status->flag = rxdesc.flags;
+ rx_status->enc_flags = rxdesc.enc_flags;
+ rx_status->encoding = rxdesc.encoding;
+ rx_status->bw = rxdesc.bw;
+ rx_status->antenna = rt2x00dev->link.ant.active.rx;
+
+ ieee80211_rx_ni(rt2x00dev->hw, entry->skb);
+
+renew_skb:
+ /*
+ * Replace the skb with the freshly allocated one.
+ */
+ entry->skb = skb;
+
+submit_entry:
+ entry->flags = 0;
+ rt2x00queue_index_inc(entry, Q_INDEX_DONE);
+ if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) &&
+ test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
+ rt2x00dev->ops->lib->clear_entry(entry);
+}
+EXPORT_SYMBOL_GPL(rt2x00lib_rxdone);
+
+/*
+ * Driver initialization handlers.
+ */
+const struct rt2x00_rate rt2x00_supported_rates[12] = {
+ {
+ .flags = DEV_RATE_CCK,
+ .bitrate = 10,
+ .ratemask = BIT(0),
+ .plcp = 0x00,
+ .mcs = RATE_MCS(RATE_MODE_CCK, 0),
+ },
+ {
+ .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE,
+ .bitrate = 20,
+ .ratemask = BIT(1),
+ .plcp = 0x01,
+ .mcs = RATE_MCS(RATE_MODE_CCK, 1),
+ },
+ {
+ .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE,
+ .bitrate = 55,
+ .ratemask = BIT(2),
+ .plcp = 0x02,
+ .mcs = RATE_MCS(RATE_MODE_CCK, 2),
+ },
+ {
+ .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE,
+ .bitrate = 110,
+ .ratemask = BIT(3),
+ .plcp = 0x03,
+ .mcs = RATE_MCS(RATE_MODE_CCK, 3),
+ },
+ {
+ .flags = DEV_RATE_OFDM,
+ .bitrate = 60,
+ .ratemask = BIT(4),
+ .plcp = 0x0b,
+ .mcs = RATE_MCS(RATE_MODE_OFDM, 0),
+ },
+ {
+ .flags = DEV_RATE_OFDM,
+ .bitrate = 90,
+ .ratemask = BIT(5),
+ .plcp = 0x0f,
+ .mcs = RATE_MCS(RATE_MODE_OFDM, 1),
+ },
+ {
+ .flags = DEV_RATE_OFDM,
+ .bitrate = 120,
+ .ratemask = BIT(6),
+ .plcp = 0x0a,
+ .mcs = RATE_MCS(RATE_MODE_OFDM, 2),
+ },
+ {
+ .flags = DEV_RATE_OFDM,
+ .bitrate = 180,
+ .ratemask = BIT(7),
+ .plcp = 0x0e,
+ .mcs = RATE_MCS(RATE_MODE_OFDM, 3),
+ },
+ {
+ .flags = DEV_RATE_OFDM,
+ .bitrate = 240,
+ .ratemask = BIT(8),
+ .plcp = 0x09,
+ .mcs = RATE_MCS(RATE_MODE_OFDM, 4),
+ },
+ {
+ .flags = DEV_RATE_OFDM,
+ .bitrate = 360,
+ .ratemask = BIT(9),
+ .plcp = 0x0d,
+ .mcs = RATE_MCS(RATE_MODE_OFDM, 5),
+ },
+ {
+ .flags = DEV_RATE_OFDM,
+ .bitrate = 480,
+ .ratemask = BIT(10),
+ .plcp = 0x08,
+ .mcs = RATE_MCS(RATE_MODE_OFDM, 6),
+ },
+ {
+ .flags = DEV_RATE_OFDM,
+ .bitrate = 540,
+ .ratemask = BIT(11),
+ .plcp = 0x0c,
+ .mcs = RATE_MCS(RATE_MODE_OFDM, 7),
+ },
+};
+
+static void rt2x00lib_channel(struct ieee80211_channel *entry,
+ const int channel, const int tx_power,
+ const int value)
+{
+ /* XXX: this assumption about the band is wrong for 802.11j */
+ entry->band = channel <= 14 ? NL80211_BAND_2GHZ : NL80211_BAND_5GHZ;
+ entry->center_freq = ieee80211_channel_to_frequency(channel,
+ entry->band);
+ entry->hw_value = value;
+ entry->max_power = tx_power;
+ entry->max_antenna_gain = 0xff;
+}
+
+static void rt2x00lib_rate(struct ieee80211_rate *entry,
+ const u16 index, const struct rt2x00_rate *rate)
+{
+ entry->flags = 0;
+ entry->bitrate = rate->bitrate;
+ entry->hw_value = index;
+ entry->hw_value_short = index;
+
+ if (rate->flags & DEV_RATE_SHORT_PREAMBLE)
+ entry->flags |= IEEE80211_RATE_SHORT_PREAMBLE;
+}
+
+void rt2x00lib_set_mac_address(struct rt2x00_dev *rt2x00dev, u8 *eeprom_mac_addr)
+{
+ of_get_mac_address(rt2x00dev->dev->of_node, eeprom_mac_addr);
+
+ if (!is_valid_ether_addr(eeprom_mac_addr)) {
+ eth_random_addr(eeprom_mac_addr);
+ rt2x00_eeprom_dbg(rt2x00dev, "MAC: %pM\n", eeprom_mac_addr);
+ }
+}
+EXPORT_SYMBOL_GPL(rt2x00lib_set_mac_address);
+
+static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev,
+ struct hw_mode_spec *spec)
+{
+ struct ieee80211_hw *hw = rt2x00dev->hw;
+ struct ieee80211_channel *channels;
+ struct ieee80211_rate *rates;
+ unsigned int num_rates;
+ unsigned int i;
+
+ num_rates = 0;
+ if (spec->supported_rates & SUPPORT_RATE_CCK)
+ num_rates += 4;
+ if (spec->supported_rates & SUPPORT_RATE_OFDM)
+ num_rates += 8;
+
+ channels = kcalloc(spec->num_channels, sizeof(*channels), GFP_KERNEL);
+ if (!channels)
+ return -ENOMEM;
+
+ rates = kcalloc(num_rates, sizeof(*rates), GFP_KERNEL);
+ if (!rates)
+ goto exit_free_channels;
+
+ /*
+ * Initialize Rate list.
+ */
+ for (i = 0; i < num_rates; i++)
+ rt2x00lib_rate(&rates[i], i, rt2x00_get_rate(i));
+
+ /*
+ * Initialize Channel list.
+ */
+ for (i = 0; i < spec->num_channels; i++) {
+ rt2x00lib_channel(&channels[i],
+ spec->channels[i].channel,
+ spec->channels_info[i].max_power, i);
+ }
+
+ /*
+ * Intitialize 802.11b, 802.11g
+ * Rates: CCK, OFDM.
+ * Channels: 2.4 GHz
+ */
+ if (spec->supported_bands & SUPPORT_BAND_2GHZ) {
+ rt2x00dev->bands[NL80211_BAND_2GHZ].n_channels = 14;
+ rt2x00dev->bands[NL80211_BAND_2GHZ].n_bitrates = num_rates;
+ rt2x00dev->bands[NL80211_BAND_2GHZ].channels = channels;
+ rt2x00dev->bands[NL80211_BAND_2GHZ].bitrates = rates;
+ hw->wiphy->bands[NL80211_BAND_2GHZ] =
+ &rt2x00dev->bands[NL80211_BAND_2GHZ];
+ memcpy(&rt2x00dev->bands[NL80211_BAND_2GHZ].ht_cap,
+ &spec->ht, sizeof(spec->ht));
+ }
+
+ /*
+ * Intitialize 802.11a
+ * Rates: OFDM.
+ * Channels: OFDM, UNII, HiperLAN2.
+ */
+ if (spec->supported_bands & SUPPORT_BAND_5GHZ) {
+ rt2x00dev->bands[NL80211_BAND_5GHZ].n_channels =
+ spec->num_channels - 14;
+ rt2x00dev->bands[NL80211_BAND_5GHZ].n_bitrates =
+ num_rates - 4;
+ rt2x00dev->bands[NL80211_BAND_5GHZ].channels = &channels[14];
+ rt2x00dev->bands[NL80211_BAND_5GHZ].bitrates = &rates[4];
+ hw->wiphy->bands[NL80211_BAND_5GHZ] =
+ &rt2x00dev->bands[NL80211_BAND_5GHZ];
+ memcpy(&rt2x00dev->bands[NL80211_BAND_5GHZ].ht_cap,
+ &spec->ht, sizeof(spec->ht));
+ }
+
+ return 0;
+
+ exit_free_channels:
+ kfree(channels);
+ rt2x00_err(rt2x00dev, "Allocation ieee80211 modes failed\n");
+ return -ENOMEM;
+}
+
+static void rt2x00lib_remove_hw(struct rt2x00_dev *rt2x00dev)
+{
+ if (test_bit(DEVICE_STATE_REGISTERED_HW, &rt2x00dev->flags))
+ ieee80211_unregister_hw(rt2x00dev->hw);
+
+ if (likely(rt2x00dev->hw->wiphy->bands[NL80211_BAND_2GHZ])) {
+ kfree(rt2x00dev->hw->wiphy->bands[NL80211_BAND_2GHZ]->channels);
+ kfree(rt2x00dev->hw->wiphy->bands[NL80211_BAND_2GHZ]->bitrates);
+ rt2x00dev->hw->wiphy->bands[NL80211_BAND_2GHZ] = NULL;
+ rt2x00dev->hw->wiphy->bands[NL80211_BAND_5GHZ] = NULL;
+ }
+
+ kfree(rt2x00dev->spec.channels_info);
+ kfree(rt2x00dev->chan_survey);
+}
+
+static const struct ieee80211_tpt_blink rt2x00_tpt_blink[] = {
+ { .throughput = 0 * 1024, .blink_time = 334 },
+ { .throughput = 1 * 1024, .blink_time = 260 },
+ { .throughput = 2 * 1024, .blink_time = 220 },
+ { .throughput = 5 * 1024, .blink_time = 190 },
+ { .throughput = 10 * 1024, .blink_time = 170 },
+ { .throughput = 25 * 1024, .blink_time = 150 },
+ { .throughput = 54 * 1024, .blink_time = 130 },
+ { .throughput = 120 * 1024, .blink_time = 110 },
+ { .throughput = 265 * 1024, .blink_time = 80 },
+ { .throughput = 586 * 1024, .blink_time = 50 },
+};
+
+static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev)
+{
+ struct hw_mode_spec *spec = &rt2x00dev->spec;
+ int status;
+
+ if (test_bit(DEVICE_STATE_REGISTERED_HW, &rt2x00dev->flags))
+ return 0;
+
+ /*
+ * Initialize HW modes.
+ */
+ status = rt2x00lib_probe_hw_modes(rt2x00dev, spec);
+ if (status)
+ return status;
+
+ /*
+ * Initialize HW fields.
+ */
+ rt2x00dev->hw->queues = rt2x00dev->ops->tx_queues;
+
+ /*
+ * Initialize extra TX headroom required.
+ */
+ rt2x00dev->hw->extra_tx_headroom =
+ max_t(unsigned int, IEEE80211_TX_STATUS_HEADROOM,
+ rt2x00dev->extra_tx_headroom);
+
+ /*
+ * Take TX headroom required for alignment into account.
+ */
+ if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_L2PAD))
+ rt2x00dev->hw->extra_tx_headroom += RT2X00_L2PAD_SIZE;
+ else if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_DMA))
+ rt2x00dev->hw->extra_tx_headroom += RT2X00_ALIGN_SIZE;
+
+ /*
+ * Tell mac80211 about the size of our private STA structure.
+ */
+ rt2x00dev->hw->sta_data_size = sizeof(struct rt2x00_sta);
+
+ /*
+ * Allocate tx status FIFO for driver use.
+ */
+ if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_TXSTATUS_FIFO)) {
+ /*
+ * Allocate the txstatus fifo. In the worst case the tx
+ * status fifo has to hold the tx status of all entries
+ * in all tx queues. Hence, calculate the kfifo size as
+ * tx_queues * entry_num and round up to the nearest
+ * power of 2.
+ */
+ int kfifo_size =
+ roundup_pow_of_two(rt2x00dev->ops->tx_queues *
+ rt2x00dev->tx->limit *
+ sizeof(u32));
+
+ status = kfifo_alloc(&rt2x00dev->txstatus_fifo, kfifo_size,
+ GFP_KERNEL);
+ if (status)
+ return status;
+ }
+
+ /*
+ * Initialize tasklets if used by the driver. Tasklets are
+ * disabled until the interrupts are turned on. The driver
+ * has to handle that.
+ */
+#define RT2X00_TASKLET_INIT(taskletname) \
+ if (rt2x00dev->ops->lib->taskletname) { \
+ tasklet_setup(&rt2x00dev->taskletname, \
+ rt2x00dev->ops->lib->taskletname); \
+ }
+
+ RT2X00_TASKLET_INIT(txstatus_tasklet);
+ RT2X00_TASKLET_INIT(pretbtt_tasklet);
+ RT2X00_TASKLET_INIT(tbtt_tasklet);
+ RT2X00_TASKLET_INIT(rxdone_tasklet);
+ RT2X00_TASKLET_INIT(autowake_tasklet);
+
+#undef RT2X00_TASKLET_INIT
+
+ ieee80211_create_tpt_led_trigger(rt2x00dev->hw,
+ IEEE80211_TPT_LEDTRIG_FL_RADIO,
+ rt2x00_tpt_blink,
+ ARRAY_SIZE(rt2x00_tpt_blink));
+
+ /*
+ * Register HW.
+ */
+ status = ieee80211_register_hw(rt2x00dev->hw);
+ if (status)
+ return status;
+
+ set_bit(DEVICE_STATE_REGISTERED_HW, &rt2x00dev->flags);
+
+ return 0;
+}
+
+/*
+ * Initialization/uninitialization handlers.
+ */
+static void rt2x00lib_uninitialize(struct rt2x00_dev *rt2x00dev)
+{
+ if (!test_and_clear_bit(DEVICE_STATE_INITIALIZED, &rt2x00dev->flags))
+ return;
+
+ /*
+ * Stop rfkill polling.
+ */
+ if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_DELAYED_RFKILL))
+ rt2x00rfkill_unregister(rt2x00dev);
+
+ /*
+ * Allow the HW to uninitialize.
+ */
+ rt2x00dev->ops->lib->uninitialize(rt2x00dev);
+
+ /*
+ * Free allocated queue entries.
+ */
+ rt2x00queue_uninitialize(rt2x00dev);
+}
+
+static int rt2x00lib_initialize(struct rt2x00_dev *rt2x00dev)
+{
+ int status;
+
+ if (test_bit(DEVICE_STATE_INITIALIZED, &rt2x00dev->flags))
+ return 0;
+
+ /*
+ * Allocate all queue entries.
+ */
+ status = rt2x00queue_initialize(rt2x00dev);
+ if (status)
+ return status;
+
+ /*
+ * Initialize the device.
+ */
+ status = rt2x00dev->ops->lib->initialize(rt2x00dev);
+ if (status) {
+ rt2x00queue_uninitialize(rt2x00dev);
+ return status;
+ }
+
+ set_bit(DEVICE_STATE_INITIALIZED, &rt2x00dev->flags);
+
+ /*
+ * Start rfkill polling.
+ */
+ if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_DELAYED_RFKILL))
+ rt2x00rfkill_register(rt2x00dev);
+
+ return 0;
+}
+
+int rt2x00lib_start(struct rt2x00_dev *rt2x00dev)
+{
+ int retval = 0;
+
+ /*
+ * If this is the first interface which is added,
+ * we should load the firmware now.
+ */
+ retval = rt2x00lib_load_firmware(rt2x00dev);
+ if (retval)
+ goto out;
+
+ /*
+ * Initialize the device.
+ */
+ retval = rt2x00lib_initialize(rt2x00dev);
+ if (retval)
+ goto out;
+
+ rt2x00dev->intf_ap_count = 0;
+ rt2x00dev->intf_sta_count = 0;
+ rt2x00dev->intf_associated = 0;
+
+ /* Enable the radio */
+ retval = rt2x00lib_enable_radio(rt2x00dev);
+ if (retval)
+ goto out;
+
+ set_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags);
+
+out:
+ return retval;
+}
+
+void rt2x00lib_stop(struct rt2x00_dev *rt2x00dev)
+{
+ if (!test_and_clear_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags))
+ return;
+
+ /*
+ * Perhaps we can add something smarter here,
+ * but for now just disabling the radio should do.
+ */
+ rt2x00lib_disable_radio(rt2x00dev);
+
+ rt2x00dev->intf_ap_count = 0;
+ rt2x00dev->intf_sta_count = 0;
+ rt2x00dev->intf_associated = 0;
+}
+
+static inline void rt2x00lib_set_if_combinations(struct rt2x00_dev *rt2x00dev)
+{
+ struct ieee80211_iface_limit *if_limit;
+ struct ieee80211_iface_combination *if_combination;
+
+ if (rt2x00dev->ops->max_ap_intf < 2)
+ return;
+
+ /*
+ * Build up AP interface limits structure.
+ */
+ if_limit = &rt2x00dev->if_limits_ap;
+ if_limit->max = rt2x00dev->ops->max_ap_intf;
+ if_limit->types = BIT(NL80211_IFTYPE_AP);
+#ifdef CONFIG_MAC80211_MESH
+ if_limit->types |= BIT(NL80211_IFTYPE_MESH_POINT);
+#endif
+
+ /*
+ * Build up AP interface combinations structure.
+ */
+ if_combination = &rt2x00dev->if_combinations[IF_COMB_AP];
+ if_combination->limits = if_limit;
+ if_combination->n_limits = 1;
+ if_combination->max_interfaces = if_limit->max;
+ if_combination->num_different_channels = 1;
+
+ /*
+ * Finally, specify the possible combinations to mac80211.
+ */
+ rt2x00dev->hw->wiphy->iface_combinations = rt2x00dev->if_combinations;
+ rt2x00dev->hw->wiphy->n_iface_combinations = 1;
+}
+
+static unsigned int rt2x00dev_extra_tx_headroom(struct rt2x00_dev *rt2x00dev)
+{
+ if (WARN_ON(!rt2x00dev->tx))
+ return 0;
+
+ if (rt2x00_is_usb(rt2x00dev))
+ return rt2x00dev->tx[0].winfo_size + rt2x00dev->tx[0].desc_size;
+
+ return rt2x00dev->tx[0].winfo_size;
+}
+
+/*
+ * driver allocation handlers.
+ */
+int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev)
+{
+ int retval = -ENOMEM;
+
+ /*
+ * Set possible interface combinations.
+ */
+ rt2x00lib_set_if_combinations(rt2x00dev);
+
+ /*
+ * Allocate the driver data memory, if necessary.
+ */
+ if (rt2x00dev->ops->drv_data_size > 0) {
+ rt2x00dev->drv_data = kzalloc(rt2x00dev->ops->drv_data_size,
+ GFP_KERNEL);
+ if (!rt2x00dev->drv_data) {
+ retval = -ENOMEM;
+ goto exit;
+ }
+ }
+
+ spin_lock_init(&rt2x00dev->irqmask_lock);
+ mutex_init(&rt2x00dev->csr_mutex);
+ mutex_init(&rt2x00dev->conf_mutex);
+ INIT_LIST_HEAD(&rt2x00dev->bar_list);
+ spin_lock_init(&rt2x00dev->bar_list_lock);
+ hrtimer_init(&rt2x00dev->txstatus_timer, CLOCK_MONOTONIC,
+ HRTIMER_MODE_REL);
+
+ set_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
+
+ /*
+ * Make room for rt2x00_intf inside the per-interface
+ * structure ieee80211_vif.
+ */
+ rt2x00dev->hw->vif_data_size = sizeof(struct rt2x00_intf);
+
+ /*
+ * rt2x00 devices can only use the last n bits of the MAC address
+ * for virtual interfaces.
+ */
+ rt2x00dev->hw->wiphy->addr_mask[ETH_ALEN - 1] =
+ (rt2x00dev->ops->max_ap_intf - 1);
+
+ /*
+ * Initialize work.
+ */
+ rt2x00dev->workqueue =
+ alloc_ordered_workqueue("%s", 0, wiphy_name(rt2x00dev->hw->wiphy));
+ if (!rt2x00dev->workqueue) {
+ retval = -ENOMEM;
+ goto exit;
+ }
+
+ INIT_WORK(&rt2x00dev->intf_work, rt2x00lib_intf_scheduled);
+ INIT_DELAYED_WORK(&rt2x00dev->autowakeup_work, rt2x00lib_autowakeup);
+ INIT_WORK(&rt2x00dev->sleep_work, rt2x00lib_sleep);
+
+ /*
+ * Let the driver probe the device to detect the capabilities.
+ */
+ retval = rt2x00dev->ops->lib->probe_hw(rt2x00dev);
+ if (retval) {
+ rt2x00_err(rt2x00dev, "Failed to allocate device\n");
+ goto exit;
+ }
+
+ /*
+ * Allocate queue array.
+ */
+ retval = rt2x00queue_allocate(rt2x00dev);
+ if (retval)
+ goto exit;
+
+ /* Cache TX headroom value */
+ rt2x00dev->extra_tx_headroom = rt2x00dev_extra_tx_headroom(rt2x00dev);
+
+ /*
+ * Determine which operating modes are supported, all modes
+ * which require beaconing, depend on the availability of
+ * beacon entries.
+ */
+ rt2x00dev->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
+ if (rt2x00dev->bcn->limit > 0)
+ rt2x00dev->hw->wiphy->interface_modes |=
+ BIT(NL80211_IFTYPE_ADHOC) |
+#ifdef CONFIG_MAC80211_MESH
+ BIT(NL80211_IFTYPE_MESH_POINT) |
+#endif
+ BIT(NL80211_IFTYPE_AP);
+
+ rt2x00dev->hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
+
+ wiphy_ext_feature_set(rt2x00dev->hw->wiphy,
+ NL80211_EXT_FEATURE_CQM_RSSI_LIST);
+
+ /*
+ * Initialize ieee80211 structure.
+ */
+ retval = rt2x00lib_probe_hw(rt2x00dev);
+ if (retval) {
+ rt2x00_err(rt2x00dev, "Failed to initialize hw\n");
+ goto exit;
+ }
+
+ /*
+ * Register extra components.
+ */
+ rt2x00link_register(rt2x00dev);
+ rt2x00leds_register(rt2x00dev);
+ rt2x00debug_register(rt2x00dev);
+
+ /*
+ * Start rfkill polling.
+ */
+ if (!rt2x00_has_cap_flag(rt2x00dev, REQUIRE_DELAYED_RFKILL))
+ rt2x00rfkill_register(rt2x00dev);
+
+ return 0;
+
+exit:
+ rt2x00lib_remove_dev(rt2x00dev);
+
+ return retval;
+}
+EXPORT_SYMBOL_GPL(rt2x00lib_probe_dev);
+
+void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev)
+{
+ clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
+
+ /*
+ * Stop rfkill polling.
+ */
+ if (!rt2x00_has_cap_flag(rt2x00dev, REQUIRE_DELAYED_RFKILL))
+ rt2x00rfkill_unregister(rt2x00dev);
+
+ /*
+ * Disable radio.
+ */
+ rt2x00lib_disable_radio(rt2x00dev);
+
+ /*
+ * Stop all work.
+ */
+ cancel_work_sync(&rt2x00dev->intf_work);
+ cancel_delayed_work_sync(&rt2x00dev->autowakeup_work);
+ cancel_work_sync(&rt2x00dev->sleep_work);
+
+ hrtimer_cancel(&rt2x00dev->txstatus_timer);
+
+ /*
+ * Kill the tx status tasklet.
+ */
+ tasklet_kill(&rt2x00dev->txstatus_tasklet);
+ tasklet_kill(&rt2x00dev->pretbtt_tasklet);
+ tasklet_kill(&rt2x00dev->tbtt_tasklet);
+ tasklet_kill(&rt2x00dev->rxdone_tasklet);
+ tasklet_kill(&rt2x00dev->autowake_tasklet);
+
+ /*
+ * Uninitialize device.
+ */
+ rt2x00lib_uninitialize(rt2x00dev);
+
+ if (rt2x00dev->workqueue)
+ destroy_workqueue(rt2x00dev->workqueue);
+
+ /*
+ * Free the tx status fifo.
+ */
+ kfifo_free(&rt2x00dev->txstatus_fifo);
+
+ /*
+ * Free extra components
+ */
+ rt2x00debug_deregister(rt2x00dev);
+ rt2x00leds_unregister(rt2x00dev);
+
+ /*
+ * Free ieee80211_hw memory.
+ */
+ rt2x00lib_remove_hw(rt2x00dev);
+
+ /*
+ * Free firmware image.
+ */
+ rt2x00lib_free_firmware(rt2x00dev);
+
+ /*
+ * Free queue structures.
+ */
+ rt2x00queue_free(rt2x00dev);
+
+ /*
+ * Free the driver data.
+ */
+ kfree(rt2x00dev->drv_data);
+}
+EXPORT_SYMBOL_GPL(rt2x00lib_remove_dev);
+
+/*
+ * Device state handlers
+ */
+int rt2x00lib_suspend(struct rt2x00_dev *rt2x00dev)
+{
+ rt2x00_dbg(rt2x00dev, "Going to sleep\n");
+
+ /*
+ * Prevent mac80211 from accessing driver while suspended.
+ */
+ if (!test_and_clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
+ return 0;
+
+ /*
+ * Cleanup as much as possible.
+ */
+ rt2x00lib_uninitialize(rt2x00dev);
+
+ /*
+ * Suspend/disable extra components.
+ */
+ rt2x00leds_suspend(rt2x00dev);
+ rt2x00debug_deregister(rt2x00dev);
+
+ /*
+ * Set device mode to sleep for power management,
+ * on some hardware this call seems to consistently fail.
+ * From the specifications it is hard to tell why it fails,
+ * and if this is a "bad thing".
+ * Overall it is safe to just ignore the failure and
+ * continue suspending. The only downside is that the
+ * device will not be in optimal power save mode, but with
+ * the radio and the other components already disabled the
+ * device is as good as disabled.
+ */
+ if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_SLEEP))
+ rt2x00_warn(rt2x00dev, "Device failed to enter sleep state, continue suspending\n");
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rt2x00lib_suspend);
+
+int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev)
+{
+ rt2x00_dbg(rt2x00dev, "Waking up\n");
+
+ /*
+ * Restore/enable extra components.
+ */
+ rt2x00debug_register(rt2x00dev);
+ rt2x00leds_resume(rt2x00dev);
+
+ /*
+ * We are ready again to receive requests from mac80211.
+ */
+ set_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rt2x00lib_resume);
+
+/*
+ * rt2x00lib module information.
+ */
+MODULE_AUTHOR(DRV_PROJECT);
+MODULE_VERSION(DRV_VERSION);
+MODULE_DESCRIPTION("rt2x00 library");
+MODULE_LICENSE("GPL");