1 files changed, 682 insertions, 0 deletions

diff --git a/drivers/phy/broadcom/phy-brcm-usb.c b/drivers/phy/broadcom/phy-brcm-usb.c
new file mode 100644
index 000000000..7a4c328ba
--- /dev/null
+++ b/drivers/phy/broadcom/phy-brcm-usb.c
@@ -0,0 +1,682 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * phy-brcm-usb.c - Broadcom USB Phy Driver
+ *
+ * Copyright (C) 2015-2017 Broadcom
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/soc/brcmstb/brcmstb.h>
+#include <dt-bindings/phy/phy.h>
+#include <linux/mfd/syscon.h>
+#include <linux/suspend.h>
+
+#include "phy-brcm-usb-init.h"
+
+static DEFINE_MUTEX(sysfs_lock);
+
+enum brcm_usb_phy_id {
+	BRCM_USB_PHY_2_0 = 0,
+	BRCM_USB_PHY_3_0,
+	BRCM_USB_PHY_ID_MAX
+};
+
+struct value_to_name_map {
+	int value;
+	const char *name;
+};
+
+struct match_chip_info {
+	void (*init_func)(struct brcm_usb_init_params *params);
+	u8 required_regs[BRCM_REGS_MAX + 1];
+	u8 optional_reg;
+};
+
+static const struct value_to_name_map brcm_dr_mode_to_name[] = {
+	{ USB_CTLR_MODE_HOST, "host" },
+	{ USB_CTLR_MODE_DEVICE, "peripheral" },
+	{ USB_CTLR_MODE_DRD, "drd" },
+	{ USB_CTLR_MODE_TYPEC_PD, "typec-pd" }
+};
+
+static const struct value_to_name_map brcm_dual_mode_to_name[] = {
+	{ 0, "host" },
+	{ 1, "device" },
+	{ 2, "auto" },
+};
+
+struct brcm_usb_phy {
+	struct phy *phy;
+	unsigned int id;
+	bool inited;
+};
+
+struct brcm_usb_phy_data {
+	struct  brcm_usb_init_params ini;
+	bool			has_eohci;
+	bool			has_xhci;
+	struct clk		*usb_20_clk;
+	struct clk		*usb_30_clk;
+	struct clk		*suspend_clk;
+	struct mutex		mutex;	/* serialize phy init */
+	int			init_count;
+	int			wake_irq;
+	struct brcm_usb_phy	phys[BRCM_USB_PHY_ID_MAX];
+	struct notifier_block	pm_notifier;
+	bool			pm_active;
+};
+
+static s8 *node_reg_names[BRCM_REGS_MAX] = {
+	"crtl", "xhci_ec", "xhci_gbl", "usb_phy", "usb_mdio", "bdc_ec"
+};
+
+static int brcm_pm_notifier(struct notifier_block *notifier,
+			    unsigned long pm_event,
+			    void *unused)
+{
+	struct brcm_usb_phy_data *priv =
+		container_of(notifier, struct brcm_usb_phy_data, pm_notifier);
+
+	switch (pm_event) {
+	case PM_HIBERNATION_PREPARE:
+	case PM_SUSPEND_PREPARE:
+		priv->pm_active = true;
+		break;
+	case PM_POST_RESTORE:
+	case PM_POST_HIBERNATION:
+	case PM_POST_SUSPEND:
+		priv->pm_active = false;
+		break;
+	}
+	return NOTIFY_DONE;
+}
+
+static irqreturn_t brcm_usb_phy_wake_isr(int irq, void *dev_id)
+{
+	struct device *dev = dev_id;
+
+	pm_wakeup_event(dev, 0);
+
+	return IRQ_HANDLED;
+}
+
+static int brcm_usb_phy_init(struct phy *gphy)
+{
+	struct brcm_usb_phy *phy = phy_get_drvdata(gphy);
+	struct brcm_usb_phy_data *priv =
+		container_of(phy, struct brcm_usb_phy_data, phys[phy->id]);
+
+	if (priv->pm_active)
+		return 0;
+
+	/*
+	 * Use a lock to make sure a second caller waits until
+	 * the base phy is inited before using it.
+	 */
+	mutex_lock(&priv->mutex);
+	if (priv->init_count++ == 0) {
+		clk_prepare_enable(priv->usb_20_clk);
+		clk_prepare_enable(priv->usb_30_clk);
+		clk_prepare_enable(priv->suspend_clk);
+		brcm_usb_init_common(&priv->ini);
+	}
+	mutex_unlock(&priv->mutex);
+	if (phy->id == BRCM_USB_PHY_2_0)
+		brcm_usb_init_eohci(&priv->ini);
+	else if (phy->id == BRCM_USB_PHY_3_0)
+		brcm_usb_init_xhci(&priv->ini);
+	phy->inited = true;
+	dev_dbg(&gphy->dev, "INIT, id: %d, total: %d\n", phy->id,
+		priv->init_count);
+
+	return 0;
+}
+
+static int brcm_usb_phy_exit(struct phy *gphy)
+{
+	struct brcm_usb_phy *phy = phy_get_drvdata(gphy);
+	struct brcm_usb_phy_data *priv =
+		container_of(phy, struct brcm_usb_phy_data, phys[phy->id]);
+
+	if (priv->pm_active)
+		return 0;
+
+	dev_dbg(&gphy->dev, "EXIT\n");
+	if (phy->id == BRCM_USB_PHY_2_0)
+		brcm_usb_uninit_eohci(&priv->ini);
+	if (phy->id == BRCM_USB_PHY_3_0)
+		brcm_usb_uninit_xhci(&priv->ini);
+
+	/* If both xhci and eohci are gone, reset everything else */
+	mutex_lock(&priv->mutex);
+	if (--priv->init_count == 0) {
+		brcm_usb_uninit_common(&priv->ini);
+		clk_disable_unprepare(priv->usb_20_clk);
+		clk_disable_unprepare(priv->usb_30_clk);
+		clk_disable_unprepare(priv->suspend_clk);
+	}
+	mutex_unlock(&priv->mutex);
+	phy->inited = false;
+	return 0;
+}
+
+static const struct phy_ops brcm_usb_phy_ops = {
+	.init		= brcm_usb_phy_init,
+	.exit		= brcm_usb_phy_exit,
+	.owner		= THIS_MODULE,
+};
+
+static struct phy *brcm_usb_phy_xlate(struct device *dev,
+				      struct of_phandle_args *args)
+{
+	struct brcm_usb_phy_data *data = dev_get_drvdata(dev);
+
+	/*
+	 * values 0 and 1 are for backward compatibility with
+	 * device tree nodes from older bootloaders.
+	 */
+	switch (args->args[0]) {
+	case 0:
+	case PHY_TYPE_USB2:
+		if (data->phys[BRCM_USB_PHY_2_0].phy)
+			return data->phys[BRCM_USB_PHY_2_0].phy;
+		dev_warn(dev, "Error, 2.0 Phy not found\n");
+		break;
+	case 1:
+	case PHY_TYPE_USB3:
+		if (data->phys[BRCM_USB_PHY_3_0].phy)
+			return data->phys[BRCM_USB_PHY_3_0].phy;
+		dev_warn(dev, "Error, 3.0 Phy not found\n");
+		break;
+	}
+	return ERR_PTR(-ENODEV);
+}
+
+static int name_to_value(const struct value_to_name_map *table, int count,
+			 const char *name, int *value)
+{
+	int x;
+
+	*value = 0;
+	for (x = 0; x < count; x++) {
+		if (sysfs_streq(name, table[x].name)) {
+			*value = x;
+			return 0;
+		}
+	}
+	return -EINVAL;
+}
+
+static const char *value_to_name(const struct value_to_name_map *table, int count,
+				 int value)
+{
+	if (value >= count)
+		return "unknown";
+	return table[value].name;
+}
+
+static ssize_t dr_mode_show(struct device *dev,
+			    struct device_attribute *attr,
+			    char *buf)
+{
+	struct brcm_usb_phy_data *priv = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%s\n",
+		value_to_name(&brcm_dr_mode_to_name[0],
+			      ARRAY_SIZE(brcm_dr_mode_to_name),
+			      priv->ini.mode));
+}
+static DEVICE_ATTR_RO(dr_mode);
+
+static ssize_t dual_select_store(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf, size_t len)
+{
+	struct brcm_usb_phy_data *priv = dev_get_drvdata(dev);
+	int value;
+	int res;
+
+	mutex_lock(&sysfs_lock);
+	res = name_to_value(&brcm_dual_mode_to_name[0],
+			    ARRAY_SIZE(brcm_dual_mode_to_name), buf, &value);
+	if (!res) {
+		brcm_usb_set_dual_select(&priv->ini, value);
+		res = len;
+	}
+	mutex_unlock(&sysfs_lock);
+	return res;
+}
+
+static ssize_t dual_select_show(struct device *dev,
+				struct device_attribute *attr,
+				char *buf)
+{
+	struct brcm_usb_phy_data *priv = dev_get_drvdata(dev);
+	int value;
+
+	mutex_lock(&sysfs_lock);
+	value = brcm_usb_get_dual_select(&priv->ini);
+	mutex_unlock(&sysfs_lock);
+	return sprintf(buf, "%s\n",
+		value_to_name(&brcm_dual_mode_to_name[0],
+			      ARRAY_SIZE(brcm_dual_mode_to_name),
+			      value));
+}
+static DEVICE_ATTR_RW(dual_select);
+
+static struct attribute *brcm_usb_phy_attrs[] = {
+	&dev_attr_dr_mode.attr,
+	&dev_attr_dual_select.attr,
+	NULL
+};
+
+static const struct attribute_group brcm_usb_phy_group = {
+	.attrs = brcm_usb_phy_attrs,
+};
+
+static const struct match_chip_info chip_info_4908 = {
+	.init_func = &brcm_usb_dvr_init_4908,
+	.required_regs = {
+		BRCM_REGS_CTRL,
+		BRCM_REGS_XHCI_EC,
+		-1,
+	},
+};
+
+static const struct match_chip_info chip_info_7216 = {
+	.init_func = &brcm_usb_dvr_init_7216,
+	.required_regs = {
+		BRCM_REGS_CTRL,
+		BRCM_REGS_XHCI_EC,
+		BRCM_REGS_XHCI_GBL,
+		-1,
+	},
+};
+
+static const struct match_chip_info chip_info_7211b0 = {
+	.init_func = &brcm_usb_dvr_init_7211b0,
+	.required_regs = {
+		BRCM_REGS_CTRL,
+		BRCM_REGS_XHCI_EC,
+		BRCM_REGS_XHCI_GBL,
+		BRCM_REGS_USB_PHY,
+		BRCM_REGS_USB_MDIO,
+		-1,
+	},
+	.optional_reg = BRCM_REGS_BDC_EC,
+};
+
+static const struct match_chip_info chip_info_7445 = {
+	.init_func = &brcm_usb_dvr_init_7445,
+	.required_regs = {
+		BRCM_REGS_CTRL,
+		BRCM_REGS_XHCI_EC,
+		-1,
+	},
+};
+
+static const struct of_device_id brcm_usb_dt_ids[] = {
+	{
+		.compatible = "brcm,bcm4908-usb-phy",
+		.data = &chip_info_4908,
+	},
+	{
+		.compatible = "brcm,bcm7216-usb-phy",
+		.data = &chip_info_7216,
+	},
+	{
+		.compatible = "brcm,bcm7211-usb-phy",
+		.data = &chip_info_7211b0,
+	},
+	{
+		.compatible = "brcm,brcmstb-usb-phy",
+		.data = &chip_info_7445,
+	},
+	{ /* sentinel */ }
+};
+
+static int brcm_usb_get_regs(struct platform_device *pdev,
+			     enum brcmusb_reg_sel regs,
+			     struct  brcm_usb_init_params *ini,
+			     bool optional)
+{
+	struct resource *res;
+
+	/* Older DT nodes have ctrl and optional xhci_ec by index only */
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+						node_reg_names[regs]);
+	if (res == NULL) {
+		if (regs == BRCM_REGS_CTRL) {
+			res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+		} else if (regs == BRCM_REGS_XHCI_EC) {
+			res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+			/* XHCI_EC registers are optional */
+			if (res == NULL)
+				return 0;
+		}
+		if (res == NULL) {
+			if (optional) {
+				dev_dbg(&pdev->dev,
+					"Optional reg %s not found\n",
+					node_reg_names[regs]);
+				return 0;
+			}
+			dev_err(&pdev->dev, "can't get %s base addr\n",
+				node_reg_names[regs]);
+			return 1;
+		}
+	}
+	ini->regs[regs] = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(ini->regs[regs])) {
+		dev_err(&pdev->dev, "can't map %s register space\n",
+			node_reg_names[regs]);
+		return 1;
+	}
+	return 0;
+}
+
+static int brcm_usb_phy_dvr_init(struct platform_device *pdev,
+				 struct brcm_usb_phy_data *priv,
+				 struct device_node *dn)
+{
+	struct device *dev = &pdev->dev;
+	struct phy *gphy = NULL;
+	int err;
+
+	priv->usb_20_clk = of_clk_get_by_name(dn, "sw_usb");
+	if (IS_ERR(priv->usb_20_clk)) {
+		if (PTR_ERR(priv->usb_20_clk) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+		dev_info(dev, "Clock not found in Device Tree\n");
+		priv->usb_20_clk = NULL;
+	}
+	err = clk_prepare_enable(priv->usb_20_clk);
+	if (err)
+		return err;
+
+	if (priv->has_eohci) {
+		gphy = devm_phy_create(dev, NULL, &brcm_usb_phy_ops);
+		if (IS_ERR(gphy)) {
+			dev_err(dev, "failed to create EHCI/OHCI PHY\n");
+			return PTR_ERR(gphy);
+		}
+		priv->phys[BRCM_USB_PHY_2_0].phy = gphy;
+		priv->phys[BRCM_USB_PHY_2_0].id = BRCM_USB_PHY_2_0;
+		phy_set_drvdata(gphy, &priv->phys[BRCM_USB_PHY_2_0]);
+	}
+
+	if (priv->has_xhci) {
+		gphy = devm_phy_create(dev, NULL, &brcm_usb_phy_ops);
+		if (IS_ERR(gphy)) {
+			dev_err(dev, "failed to create XHCI PHY\n");
+			return PTR_ERR(gphy);
+		}
+		priv->phys[BRCM_USB_PHY_3_0].phy = gphy;
+		priv->phys[BRCM_USB_PHY_3_0].id = BRCM_USB_PHY_3_0;
+		phy_set_drvdata(gphy, &priv->phys[BRCM_USB_PHY_3_0]);
+
+		priv->usb_30_clk = of_clk_get_by_name(dn, "sw_usb3");
+		if (IS_ERR(priv->usb_30_clk)) {
+			if (PTR_ERR(priv->usb_30_clk) == -EPROBE_DEFER)
+				return -EPROBE_DEFER;
+			dev_info(dev,
+				 "USB3.0 clock not found in Device Tree\n");
+			priv->usb_30_clk = NULL;
+		}
+		err = clk_prepare_enable(priv->usb_30_clk);
+		if (err)
+			return err;
+	}
+
+	priv->suspend_clk = clk_get(dev, "usb0_freerun");
+	if (IS_ERR(priv->suspend_clk)) {
+		if (PTR_ERR(priv->suspend_clk) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+		dev_err(dev, "Suspend Clock not found in Device Tree\n");
+		priv->suspend_clk = NULL;
+	}
+
+	priv->wake_irq = platform_get_irq_byname_optional(pdev, "wake");
+	if (priv->wake_irq < 0)
+		priv->wake_irq = platform_get_irq_byname_optional(pdev, "wakeup");
+	if (priv->wake_irq >= 0) {
+		err = devm_request_irq(dev, priv->wake_irq,
+				       brcm_usb_phy_wake_isr, 0,
+				       dev_name(dev), dev);
+		if (err < 0)
+			return err;
+		device_set_wakeup_capable(dev, 1);
+	} else {
+		dev_info(dev,
+			 "Wake interrupt missing, system wake not supported\n");
+	}
+
+	return 0;
+}
+
+static int brcm_usb_phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct brcm_usb_phy_data *priv;
+	struct phy_provider *phy_provider;
+	struct device_node *dn = pdev->dev.of_node;
+	int err;
+	const char *mode;
+	const struct match_chip_info *info;
+	struct regmap *rmap;
+	int x;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+	platform_set_drvdata(pdev, priv);
+
+	priv->ini.family_id = brcmstb_get_family_id();
+	priv->ini.product_id = brcmstb_get_product_id();
+
+	info = of_device_get_match_data(&pdev->dev);
+	if (!info)
+		return -ENOENT;
+
+	info->init_func(&priv->ini);
+
+	dev_dbg(dev, "Best mapping table is for %s\n",
+		priv->ini.family_name);
+
+	of_property_read_u32(dn, "brcm,ipp", &priv->ini.ipp);
+	of_property_read_u32(dn, "brcm,ioc", &priv->ini.ioc);
+
+	priv->ini.mode = USB_CTLR_MODE_HOST;
+	err = of_property_read_string(dn, "dr_mode", &mode);
+	if (err == 0) {
+		name_to_value(&brcm_dr_mode_to_name[0],
+			      ARRAY_SIZE(brcm_dr_mode_to_name),
+			mode, &priv->ini.mode);
+	}
+	if (of_property_read_bool(dn, "brcm,has-xhci"))
+		priv->has_xhci = true;
+	if (of_property_read_bool(dn, "brcm,has-eohci"))
+		priv->has_eohci = true;
+
+	for (x = 0; x < BRCM_REGS_MAX; x++) {
+		if (info->required_regs[x] >= BRCM_REGS_MAX)
+			break;
+
+		err = brcm_usb_get_regs(pdev, info->required_regs[x],
+					&priv->ini, false);
+		if (err)
+			return -EINVAL;
+	}
+	if (info->optional_reg) {
+		err = brcm_usb_get_regs(pdev, info->optional_reg,
+					&priv->ini, true);
+		if (err)
+			return -EINVAL;
+	}
+
+	err = brcm_usb_phy_dvr_init(pdev, priv, dn);
+	if (err)
+		return err;
+
+	priv->pm_notifier.notifier_call = brcm_pm_notifier;
+	register_pm_notifier(&priv->pm_notifier);
+
+	mutex_init(&priv->mutex);
+
+	/* make sure invert settings are correct */
+	brcm_usb_init_ipp(&priv->ini);
+
+	/*
+	 * Create sysfs entries for mode.
+	 * Remove "dual_select" attribute if not in dual mode
+	 */
+	if (priv->ini.mode != USB_CTLR_MODE_DRD)
+		brcm_usb_phy_attrs[1] = NULL;
+	err = sysfs_create_group(&dev->kobj, &brcm_usb_phy_group);
+	if (err)
+		dev_warn(dev, "Error creating sysfs attributes\n");
+
+	/* Get piarbctl syscon if it exists */
+	rmap = syscon_regmap_lookup_by_phandle(dev->of_node,
+						 "syscon-piarbctl");
+	if (IS_ERR(rmap))
+		rmap = syscon_regmap_lookup_by_phandle(dev->of_node,
+						       "brcm,syscon-piarbctl");
+	if (!IS_ERR(rmap))
+		priv->ini.syscon_piarbctl = rmap;
+
+	/* start with everything off */
+	if (priv->has_xhci)
+		brcm_usb_uninit_xhci(&priv->ini);
+	if (priv->has_eohci)
+		brcm_usb_uninit_eohci(&priv->ini);
+	brcm_usb_uninit_common(&priv->ini);
+	clk_disable_unprepare(priv->usb_20_clk);
+	clk_disable_unprepare(priv->usb_30_clk);
+
+	phy_provider = devm_of_phy_provider_register(dev, brcm_usb_phy_xlate);
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static int brcm_usb_phy_remove(struct platform_device *pdev)
+{
+	struct brcm_usb_phy_data *priv = dev_get_drvdata(&pdev->dev);
+
+	sysfs_remove_group(&pdev->dev.kobj, &brcm_usb_phy_group);
+	unregister_pm_notifier(&priv->pm_notifier);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int brcm_usb_phy_suspend(struct device *dev)
+{
+	struct brcm_usb_phy_data *priv = dev_get_drvdata(dev);
+
+	if (priv->init_count) {
+		dev_dbg(dev, "SUSPEND\n");
+		priv->ini.wake_enabled = device_may_wakeup(dev);
+		if (priv->phys[BRCM_USB_PHY_3_0].inited)
+			brcm_usb_uninit_xhci(&priv->ini);
+		if (priv->phys[BRCM_USB_PHY_2_0].inited)
+			brcm_usb_uninit_eohci(&priv->ini);
+		brcm_usb_uninit_common(&priv->ini);
+
+		/*
+		 * Handle the clocks unless needed for wake. This has
+		 * to work for both older XHCI->3.0-clks, EOHCI->2.0-clks
+		 * and newer XHCI->2.0-clks/3.0-clks.
+		 */
+
+		if (!priv->ini.wake_enabled) {
+			if (priv->phys[BRCM_USB_PHY_3_0].inited)
+				clk_disable_unprepare(priv->usb_30_clk);
+			if (priv->phys[BRCM_USB_PHY_2_0].inited ||
+			    !priv->has_eohci)
+				clk_disable_unprepare(priv->usb_20_clk);
+		}
+		if (priv->wake_irq >= 0)
+			enable_irq_wake(priv->wake_irq);
+	}
+	return 0;
+}
+
+static int brcm_usb_phy_resume(struct device *dev)
+{
+	struct brcm_usb_phy_data *priv = dev_get_drvdata(dev);
+
+	if (!priv->ini.wake_enabled) {
+		clk_prepare_enable(priv->usb_20_clk);
+		clk_prepare_enable(priv->usb_30_clk);
+	}
+	brcm_usb_init_ipp(&priv->ini);
+
+	/*
+	 * Initialize anything that was previously initialized.
+	 * Uninitialize anything that wasn't previously initialized.
+	 */
+	if (priv->init_count) {
+		dev_dbg(dev, "RESUME\n");
+		if (priv->wake_irq >= 0)
+			disable_irq_wake(priv->wake_irq);
+		brcm_usb_init_common(&priv->ini);
+		if (priv->phys[BRCM_USB_PHY_2_0].inited) {
+			brcm_usb_init_eohci(&priv->ini);
+		} else if (priv->has_eohci) {
+			brcm_usb_uninit_eohci(&priv->ini);
+			clk_disable_unprepare(priv->usb_20_clk);
+		}
+		if (priv->phys[BRCM_USB_PHY_3_0].inited) {
+			brcm_usb_init_xhci(&priv->ini);
+		} else if (priv->has_xhci) {
+			brcm_usb_uninit_xhci(&priv->ini);
+			clk_disable_unprepare(priv->usb_30_clk);
+			if (!priv->has_eohci)
+				clk_disable_unprepare(priv->usb_20_clk);
+		}
+	} else {
+		if (priv->has_xhci)
+			brcm_usb_uninit_xhci(&priv->ini);
+		if (priv->has_eohci)
+			brcm_usb_uninit_eohci(&priv->ini);
+		brcm_usb_uninit_common(&priv->ini);
+		clk_disable_unprepare(priv->usb_20_clk);
+		clk_disable_unprepare(priv->usb_30_clk);
+	}
+	priv->ini.wake_enabled = false;
+	return 0;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static const struct dev_pm_ops brcm_usb_phy_pm_ops = {
+	SET_LATE_SYSTEM_SLEEP_PM_OPS(brcm_usb_phy_suspend, brcm_usb_phy_resume)
+};
+
+MODULE_DEVICE_TABLE(of, brcm_usb_dt_ids);
+
+static struct platform_driver brcm_usb_driver = {
+	.probe		= brcm_usb_phy_probe,
+	.remove		= brcm_usb_phy_remove,
+	.driver		= {
+		.name	= "brcmstb-usb-phy",
+		.pm = &brcm_usb_phy_pm_ops,
+		.of_match_table = brcm_usb_dt_ids,
+	},
+};
+
+module_platform_driver(brcm_usb_driver);
+
+MODULE_ALIAS("platform:brcmstb-usb-phy");
+MODULE_AUTHOR("Al Cooper <acooper@broadcom.com>");
+MODULE_DESCRIPTION("BRCM USB PHY driver");
+MODULE_LICENSE("GPL v2");