diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/phy/hisilicon/phy-hi3670-usb3.c | 661 |
1 files changed, 661 insertions, 0 deletions
diff --git a/drivers/phy/hisilicon/phy-hi3670-usb3.c b/drivers/phy/hisilicon/phy-hi3670-usb3.c new file mode 100644 index 000000000..b9ffe08ab --- /dev/null +++ b/drivers/phy/hisilicon/phy-hi3670-usb3.c @@ -0,0 +1,661 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Phy provider for USB 3.1 controller on HiSilicon Kirin970 platform + * + * Copyright (C) 2017-2020 Hilisicon Electronics Co., Ltd. + * http://www.huawei.com + * + * Authors: Yu Chen <chenyu56@huawei.com> + */ + +#include <linux/bitfield.h> +#include <linux/clk.h> +#include <linux/kernel.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +#define SCTRL_SCDEEPSLEEPED (0x0) +#define USB_CLK_SELECTED BIT(20) + +#define PERI_CRG_PEREN0 (0x00) +#define PERI_CRG_PERDIS0 (0x04) +#define PERI_CRG_PEREN4 (0x40) +#define PERI_CRG_PERDIS4 (0x44) +#define PERI_CRG_PERRSTEN4 (0x90) +#define PERI_CRG_PERRSTDIS4 (0x94) +#define PERI_CRG_ISODIS (0x148) +#define PERI_CRG_PEREN6 (0x410) +#define PERI_CRG_PERDIS6 (0x414) + +#define USB_REFCLK_ISO_EN BIT(25) + +#define GT_CLK_USB2PHY_REF BIT(19) + +#define PCTRL_PERI_CTRL3 (0x10) +#define PCTRL_PERI_CTRL3_MSK_START (16) +#define USB_TCXO_EN BIT(1) + +#define PCTRL_PERI_CTRL24 (0x64) +#define SC_CLK_USB3PHY_3MUX1_SEL BIT(25) + +#define USB3OTG_CTRL0 (0x00) +#define USB3OTG_CTRL3 (0x0c) +#define USB3OTG_CTRL4 (0x10) +#define USB3OTG_CTRL5 (0x14) +#define USB3OTG_CTRL7 (0x1c) +#define USB_MISC_CFG50 (0x50) +#define USB_MISC_CFG54 (0x54) +#define USB_MISC_CFG58 (0x58) +#define USB_MISC_CFG5C (0x5c) +#define USB_MISC_CFGA0 (0xa0) +#define TCA_CLK_RST (0x200) +#define TCA_INTR_EN (0x204) +#define TCA_INTR_STS (0x208) +#define TCA_GCFG (0x210) +#define TCA_TCPC (0x214) +#define TCA_SYSMODE_CFG (0x218) +#define TCA_VBUS_CTRL (0x240) + +#define CTRL0_USB3_VBUSVLD BIT(7) +#define CTRL0_USB3_VBUSVLD_SEL BIT(6) + +#define CTRL3_USB2_VBUSVLDEXT0 BIT(6) +#define CTRL3_USB2_VBUSVLDEXTSEL0 BIT(5) + +#define CTRL5_USB2_SIDDQ BIT(0) + +#define CTRL7_USB2_REFCLKSEL_MASK GENMASK(4, 3) +#define CTRL7_USB2_REFCLKSEL_ABB (BIT(4) | BIT(3)) +#define CTRL7_USB2_REFCLKSEL_PAD BIT(4) + +#define CFG50_USB3_PHY_TEST_POWERDOWN BIT(23) + +#define CFG54_USB31PHY_CR_ADDR_MASK GENMASK(31, 16) + +#define CFG54_USB3PHY_REF_USE_PAD BIT(12) +#define CFG54_PHY0_PMA_PWR_STABLE BIT(11) +#define CFG54_PHY0_PCS_PWR_STABLE BIT(9) +#define CFG54_USB31PHY_CR_ACK BIT(7) +#define CFG54_USB31PHY_CR_WR_EN BIT(5) +#define CFG54_USB31PHY_CR_SEL BIT(4) +#define CFG54_USB31PHY_CR_RD_EN BIT(3) +#define CFG54_USB31PHY_CR_CLK BIT(2) +#define CFG54_USB3_PHY0_ANA_PWR_EN BIT(1) + +#define CFG58_USB31PHY_CR_DATA_MASK GENMASK(31, 16) + +#define CFG5C_USB3_PHY0_SS_MPLLA_SSC_EN BIT(1) + +#define CFGA0_VAUX_RESET BIT(9) +#define CFGA0_USB31C_RESET BIT(8) +#define CFGA0_USB2PHY_REFCLK_SELECT BIT(4) +#define CFGA0_USB3PHY_RESET BIT(1) +#define CFGA0_USB2PHY_POR BIT(0) + +#define INTR_EN_XA_TIMEOUT_EVT_EN BIT(1) +#define INTR_EN_XA_ACK_EVT_EN BIT(0) + +#define CLK_RST_TCA_REF_CLK_EN BIT(1) +#define CLK_RST_SUSPEND_CLK_EN BIT(0) + +#define GCFG_ROLE_HSTDEV BIT(4) +#define GCFG_OP_MODE GENMASK(1, 0) +#define GCFG_OP_MODE_CTRL_SYNC_MODE BIT(0) + +#define TCPC_VALID BIT(4) +#define TCPC_LOW_POWER_EN BIT(3) +#define TCPC_MUX_CONTROL_MASK GENMASK(1, 0) +#define TCPC_MUX_CONTROL_USB31 BIT(0) + +#define SYSMODE_CFG_TYPEC_DISABLE BIT(3) + +#define VBUS_CTRL_POWERPRESENT_OVERRD GENMASK(3, 2) +#define VBUS_CTRL_VBUSVALID_OVERRD GENMASK(1, 0) + +#define KIRIN970_USB_DEFAULT_PHY_PARAM (0xfdfee4) +#define KIRIN970_USB_DEFAULT_PHY_VBOOST (0x5) + +#define TX_VBOOST_LVL_REG (0xf) +#define TX_VBOOST_LVL_START (6) +#define TX_VBOOST_LVL_ENABLE BIT(9) + +struct hi3670_priv { + struct device *dev; + struct regmap *peri_crg; + struct regmap *pctrl; + struct regmap *sctrl; + struct regmap *usb31misc; + + u32 eye_diagram_param; + u32 tx_vboost_lvl; + + u32 peri_crg_offset; + u32 pctrl_offset; + u32 usb31misc_offset; +}; + +static int hi3670_phy_cr_clk(struct regmap *usb31misc) +{ + int ret; + + /* Clock up */ + ret = regmap_update_bits(usb31misc, USB_MISC_CFG54, + CFG54_USB31PHY_CR_CLK, CFG54_USB31PHY_CR_CLK); + if (ret) + return ret; + + /* Clock down */ + return regmap_update_bits(usb31misc, USB_MISC_CFG54, + CFG54_USB31PHY_CR_CLK, 0); +} + +static int hi3670_phy_cr_set_sel(struct regmap *usb31misc) +{ + return regmap_update_bits(usb31misc, USB_MISC_CFG54, + CFG54_USB31PHY_CR_SEL, CFG54_USB31PHY_CR_SEL); +} + +static int hi3670_phy_cr_start(struct regmap *usb31misc, int direction) +{ + int ret, reg; + + if (direction) + reg = CFG54_USB31PHY_CR_WR_EN; + else + reg = CFG54_USB31PHY_CR_RD_EN; + + ret = regmap_update_bits(usb31misc, USB_MISC_CFG54, reg, reg); + + if (ret) + return ret; + + ret = hi3670_phy_cr_clk(usb31misc); + if (ret) + return ret; + + return regmap_update_bits(usb31misc, USB_MISC_CFG54, + CFG54_USB31PHY_CR_RD_EN | CFG54_USB31PHY_CR_WR_EN, 0); +} + +static int hi3670_phy_cr_wait_ack(struct regmap *usb31misc) +{ + u32 reg; + int retry = 10; + int ret; + + while (retry-- > 0) { + ret = regmap_read(usb31misc, USB_MISC_CFG54, ®); + if (ret) + return ret; + if ((reg & CFG54_USB31PHY_CR_ACK) == CFG54_USB31PHY_CR_ACK) + return 0; + + ret = hi3670_phy_cr_clk(usb31misc); + if (ret) + return ret; + + usleep_range(10, 20); + } + + return -ETIMEDOUT; +} + +static int hi3670_phy_cr_set_addr(struct regmap *usb31misc, u32 addr) +{ + u32 reg; + int ret; + + ret = regmap_read(usb31misc, USB_MISC_CFG54, ®); + if (ret) + return ret; + + reg = FIELD_PREP(CFG54_USB31PHY_CR_ADDR_MASK, addr); + + return regmap_update_bits(usb31misc, USB_MISC_CFG54, + CFG54_USB31PHY_CR_ADDR_MASK, reg); +} + +static int hi3670_phy_cr_read(struct regmap *usb31misc, u32 addr, u32 *val) +{ + int reg, i, ret; + + for (i = 0; i < 100; i++) { + ret = hi3670_phy_cr_clk(usb31misc); + if (ret) + return ret; + } + + ret = hi3670_phy_cr_set_sel(usb31misc); + if (ret) + return ret; + + ret = hi3670_phy_cr_set_addr(usb31misc, addr); + if (ret) + return ret; + + ret = hi3670_phy_cr_start(usb31misc, 0); + if (ret) + return ret; + + ret = hi3670_phy_cr_wait_ack(usb31misc); + if (ret) + return ret; + + ret = regmap_read(usb31misc, USB_MISC_CFG58, ®); + if (ret) + return ret; + + *val = FIELD_GET(CFG58_USB31PHY_CR_DATA_MASK, reg); + + return 0; +} + +static int hi3670_phy_cr_write(struct regmap *usb31misc, u32 addr, u32 val) +{ + int i; + int ret; + + for (i = 0; i < 100; i++) { + ret = hi3670_phy_cr_clk(usb31misc); + if (ret) + return ret; + } + + ret = hi3670_phy_cr_set_sel(usb31misc); + if (ret) + return ret; + + ret = hi3670_phy_cr_set_addr(usb31misc, addr); + if (ret) + return ret; + + ret = regmap_write(usb31misc, USB_MISC_CFG58, + FIELD_PREP(CFG58_USB31PHY_CR_DATA_MASK, val)); + if (ret) + return ret; + + ret = hi3670_phy_cr_start(usb31misc, 1); + if (ret) + return ret; + + return hi3670_phy_cr_wait_ack(usb31misc); +} + +static int hi3670_phy_set_params(struct hi3670_priv *priv) +{ + u32 reg; + int ret; + int retry = 3; + + ret = regmap_write(priv->usb31misc, USB3OTG_CTRL4, + priv->eye_diagram_param); + if (ret) { + dev_err(priv->dev, "set USB3OTG_CTRL4 failed\n"); + return ret; + } + + while (retry-- > 0) { + ret = hi3670_phy_cr_read(priv->usb31misc, + TX_VBOOST_LVL_REG, ®); + if (!ret) + break; + + if (ret != -ETIMEDOUT) { + dev_err(priv->dev, "read TX_VBOOST_LVL_REG failed\n"); + return ret; + } + } + if (ret) + return ret; + + reg |= (TX_VBOOST_LVL_ENABLE | (priv->tx_vboost_lvl << TX_VBOOST_LVL_START)); + ret = hi3670_phy_cr_write(priv->usb31misc, TX_VBOOST_LVL_REG, reg); + if (ret) + dev_err(priv->dev, "write TX_VBOOST_LVL_REG failed\n"); + + return ret; +} + +static bool hi3670_is_abbclk_selected(struct hi3670_priv *priv) +{ + u32 reg; + + if (!priv->sctrl) { + dev_err(priv->dev, "priv->sctrl is null!\n"); + return false; + } + + if (regmap_read(priv->sctrl, SCTRL_SCDEEPSLEEPED, ®)) { + dev_err(priv->dev, "SCTRL_SCDEEPSLEEPED read failed!\n"); + return false; + } + + if ((reg & USB_CLK_SELECTED) == 0) + return false; + + return true; +} + +static int hi3670_config_phy_clock(struct hi3670_priv *priv) +{ + u32 val, mask; + int ret; + + if (!hi3670_is_abbclk_selected(priv)) { + /* usb refclk iso disable */ + ret = regmap_write(priv->peri_crg, PERI_CRG_ISODIS, + USB_REFCLK_ISO_EN); + if (ret) + goto out; + + /* enable usb_tcxo_en */ + ret = regmap_write(priv->pctrl, PCTRL_PERI_CTRL3, + USB_TCXO_EN | + (USB_TCXO_EN << PCTRL_PERI_CTRL3_MSK_START)); + + /* select usbphy clk from abb */ + mask = SC_CLK_USB3PHY_3MUX1_SEL; + ret = regmap_update_bits(priv->pctrl, + PCTRL_PERI_CTRL24, mask, 0); + if (ret) + goto out; + + ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFGA0, + CFGA0_USB2PHY_REFCLK_SELECT, 0); + if (ret) + goto out; + + ret = regmap_read(priv->usb31misc, USB3OTG_CTRL7, &val); + if (ret) + goto out; + val &= ~CTRL7_USB2_REFCLKSEL_MASK; + val |= CTRL7_USB2_REFCLKSEL_ABB; + ret = regmap_write(priv->usb31misc, USB3OTG_CTRL7, val); + if (ret) + goto out; + + return 0; + } + + ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFG54, + CFG54_USB3PHY_REF_USE_PAD, + CFG54_USB3PHY_REF_USE_PAD); + if (ret) + goto out; + + ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFGA0, + CFGA0_USB2PHY_REFCLK_SELECT, + CFGA0_USB2PHY_REFCLK_SELECT); + if (ret) + goto out; + + ret = regmap_read(priv->usb31misc, USB3OTG_CTRL7, &val); + if (ret) + goto out; + val &= ~CTRL7_USB2_REFCLKSEL_MASK; + val |= CTRL7_USB2_REFCLKSEL_PAD; + ret = regmap_write(priv->usb31misc, USB3OTG_CTRL7, val); + if (ret) + goto out; + + ret = regmap_write(priv->peri_crg, + PERI_CRG_PEREN6, GT_CLK_USB2PHY_REF); + if (ret) + goto out; + + return 0; +out: + dev_err(priv->dev, "failed to config phy clock ret: %d\n", ret); + return ret; +} + +static int hi3670_config_tca(struct hi3670_priv *priv) +{ + u32 val, mask; + int ret; + + ret = regmap_write(priv->usb31misc, TCA_INTR_STS, 0xffff); + if (ret) + goto out; + + ret = regmap_write(priv->usb31misc, TCA_INTR_EN, + INTR_EN_XA_TIMEOUT_EVT_EN | INTR_EN_XA_ACK_EVT_EN); + if (ret) + goto out; + + mask = CLK_RST_TCA_REF_CLK_EN | CLK_RST_SUSPEND_CLK_EN; + ret = regmap_update_bits(priv->usb31misc, TCA_CLK_RST, mask, 0); + if (ret) + goto out; + + ret = regmap_update_bits(priv->usb31misc, TCA_GCFG, + GCFG_ROLE_HSTDEV | GCFG_OP_MODE, + GCFG_ROLE_HSTDEV | GCFG_OP_MODE_CTRL_SYNC_MODE); + if (ret) + goto out; + + ret = regmap_update_bits(priv->usb31misc, TCA_SYSMODE_CFG, + SYSMODE_CFG_TYPEC_DISABLE, 0); + if (ret) + goto out; + + ret = regmap_read(priv->usb31misc, TCA_TCPC, &val); + if (ret) + goto out; + val &= ~(TCPC_VALID | TCPC_LOW_POWER_EN | TCPC_MUX_CONTROL_MASK); + val |= (TCPC_VALID | TCPC_MUX_CONTROL_USB31); + ret = regmap_write(priv->usb31misc, TCA_TCPC, val); + if (ret) + goto out; + + ret = regmap_write(priv->usb31misc, TCA_VBUS_CTRL, + VBUS_CTRL_POWERPRESENT_OVERRD | VBUS_CTRL_VBUSVALID_OVERRD); + if (ret) + goto out; + + return 0; +out: + dev_err(priv->dev, "failed to config phy clock ret: %d\n", ret); + return ret; +} + +static int hi3670_phy_init(struct phy *phy) +{ + struct hi3670_priv *priv = phy_get_drvdata(phy); + u32 val; + int ret; + + /* assert controller */ + val = CFGA0_VAUX_RESET | CFGA0_USB31C_RESET | + CFGA0_USB3PHY_RESET | CFGA0_USB2PHY_POR; + ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFGA0, val, 0); + if (ret) + goto out; + + ret = hi3670_config_phy_clock(priv); + if (ret) + goto out; + + /* Exit from IDDQ mode */ + ret = regmap_update_bits(priv->usb31misc, USB3OTG_CTRL5, + CTRL5_USB2_SIDDQ, 0); + if (ret) + goto out; + + /* Release USB31 PHY out of TestPowerDown mode */ + ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFG50, + CFG50_USB3_PHY_TEST_POWERDOWN, 0); + if (ret) + goto out; + + /* Deassert phy */ + val = CFGA0_USB3PHY_RESET | CFGA0_USB2PHY_POR; + ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFGA0, val, val); + if (ret) + goto out; + + usleep_range(100, 120); + + /* Tell the PHY power is stable */ + val = CFG54_USB3_PHY0_ANA_PWR_EN | CFG54_PHY0_PCS_PWR_STABLE | + CFG54_PHY0_PMA_PWR_STABLE; + ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFG54, + val, val); + if (ret) + goto out; + + ret = hi3670_config_tca(priv); + if (ret) + goto out; + + /* Enable SSC */ + ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFG5C, + CFG5C_USB3_PHY0_SS_MPLLA_SSC_EN, + CFG5C_USB3_PHY0_SS_MPLLA_SSC_EN); + if (ret) + goto out; + + /* Deassert controller */ + val = CFGA0_VAUX_RESET | CFGA0_USB31C_RESET; + ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFGA0, val, val); + if (ret) + goto out; + + usleep_range(100, 120); + + /* Set fake vbus valid signal */ + val = CTRL0_USB3_VBUSVLD | CTRL0_USB3_VBUSVLD_SEL; + ret = regmap_update_bits(priv->usb31misc, USB3OTG_CTRL0, val, val); + if (ret) + goto out; + + val = CTRL3_USB2_VBUSVLDEXT0 | CTRL3_USB2_VBUSVLDEXTSEL0; + ret = regmap_update_bits(priv->usb31misc, USB3OTG_CTRL3, val, val); + if (ret) + goto out; + + usleep_range(100, 120); + + ret = hi3670_phy_set_params(priv); + if (ret) + goto out; + + return 0; +out: + dev_err(priv->dev, "failed to init phy ret: %d\n", ret); + return ret; +} + +static int hi3670_phy_exit(struct phy *phy) +{ + struct hi3670_priv *priv = phy_get_drvdata(phy); + u32 mask; + int ret; + + /* Assert phy */ + mask = CFGA0_USB3PHY_RESET | CFGA0_USB2PHY_POR; + ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFGA0, mask, 0); + if (ret) + goto out; + + if (!hi3670_is_abbclk_selected(priv)) { + /* disable usb_tcxo_en */ + ret = regmap_write(priv->pctrl, PCTRL_PERI_CTRL3, + USB_TCXO_EN << PCTRL_PERI_CTRL3_MSK_START); + } else { + ret = regmap_write(priv->peri_crg, PERI_CRG_PERDIS6, + GT_CLK_USB2PHY_REF); + if (ret) + goto out; + } + + return 0; +out: + dev_err(priv->dev, "failed to exit phy ret: %d\n", ret); + return ret; +} + +static const struct phy_ops hi3670_phy_ops = { + .init = hi3670_phy_init, + .exit = hi3670_phy_exit, + .owner = THIS_MODULE, +}; + +static int hi3670_phy_probe(struct platform_device *pdev) +{ + struct phy_provider *phy_provider; + struct device *dev = &pdev->dev; + struct phy *phy; + struct hi3670_priv *priv; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->dev = dev; + priv->peri_crg = syscon_regmap_lookup_by_phandle(dev->of_node, + "hisilicon,pericrg-syscon"); + if (IS_ERR(priv->peri_crg)) { + dev_err(dev, "no hisilicon,pericrg-syscon\n"); + return PTR_ERR(priv->peri_crg); + } + + priv->pctrl = syscon_regmap_lookup_by_phandle(dev->of_node, + "hisilicon,pctrl-syscon"); + if (IS_ERR(priv->pctrl)) { + dev_err(dev, "no hisilicon,pctrl-syscon\n"); + return PTR_ERR(priv->pctrl); + } + + priv->sctrl = syscon_regmap_lookup_by_phandle(dev->of_node, + "hisilicon,sctrl-syscon"); + if (IS_ERR(priv->sctrl)) { + dev_err(dev, "no hisilicon,sctrl-syscon\n"); + return PTR_ERR(priv->sctrl); + } + + /* node of hi3670 phy is a sub-node of usb3_otg_bc */ + priv->usb31misc = syscon_node_to_regmap(dev->parent->of_node); + if (IS_ERR(priv->usb31misc)) { + dev_err(dev, "no hisilicon,usb3-otg-bc-syscon\n"); + return PTR_ERR(priv->usb31misc); + } + + if (of_property_read_u32(dev->of_node, "hisilicon,eye-diagram-param", + &priv->eye_diagram_param)) + priv->eye_diagram_param = KIRIN970_USB_DEFAULT_PHY_PARAM; + + if (of_property_read_u32(dev->of_node, "hisilicon,tx-vboost-lvl", + &priv->tx_vboost_lvl)) + priv->tx_vboost_lvl = KIRIN970_USB_DEFAULT_PHY_VBOOST; + + phy = devm_phy_create(dev, NULL, &hi3670_phy_ops); + if (IS_ERR(phy)) + return PTR_ERR(phy); + + phy_set_drvdata(phy, priv); + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct of_device_id hi3670_phy_of_match[] = { + { .compatible = "hisilicon,hi3670-usb-phy" }, + { }, +}; +MODULE_DEVICE_TABLE(of, hi3670_phy_of_match); + +static struct platform_driver hi3670_phy_driver = { + .probe = hi3670_phy_probe, + .driver = { + .name = "hi3670-usb-phy", + .of_match_table = hi3670_phy_of_match, + } +}; +module_platform_driver(hi3670_phy_driver); + +MODULE_AUTHOR("Yu Chen <chenyu56@huawei.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Hilisicon Kirin970 USB31 PHY Driver"); |