diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/platform/x86/asus-laptop.c | 1971 |
1 files changed, 1971 insertions, 0 deletions
diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c new file mode 100644 index 000000000..47b2f8bb6 --- /dev/null +++ b/drivers/platform/x86/asus-laptop.c @@ -0,0 +1,1971 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * asus-laptop.c - Asus Laptop Support + * + * Copyright (C) 2002-2005 Julien Lerouge, 2003-2006 Karol Kozimor + * Copyright (C) 2006-2007 Corentin Chary + * Copyright (C) 2011 Wind River Systems + * + * The development page for this driver is located at + * http://sourceforge.net/projects/acpi4asus/ + * + * Credits: + * Pontus Fuchs - Helper functions, cleanup + * Johann Wiesner - Small compile fixes + * John Belmonte - ACPI code for Toshiba laptop was a good starting point. + * Eric Burghard - LED display support for W1N + * Josh Green - Light Sens support + * Thomas Tuttle - His first patch for led support was very helpful + * Sam Lin - GPS support + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/err.h> +#include <linux/proc_fs.h> +#include <linux/backlight.h> +#include <linux/fb.h> +#include <linux/leds.h> +#include <linux/platform_device.h> +#include <linux/uaccess.h> +#include <linux/input.h> +#include <linux/input/sparse-keymap.h> +#include <linux/rfkill.h> +#include <linux/slab.h> +#include <linux/dmi.h> +#include <linux/acpi.h> +#include <acpi/video.h> + +#define ASUS_LAPTOP_VERSION "0.42" + +#define ASUS_LAPTOP_NAME "Asus Laptop Support" +#define ASUS_LAPTOP_CLASS "hotkey" +#define ASUS_LAPTOP_DEVICE_NAME "Hotkey" +#define ASUS_LAPTOP_FILE KBUILD_MODNAME +#define ASUS_LAPTOP_PREFIX "\\_SB.ATKD." + +MODULE_AUTHOR("Julien Lerouge, Karol Kozimor, Corentin Chary"); +MODULE_DESCRIPTION(ASUS_LAPTOP_NAME); +MODULE_LICENSE("GPL"); + +/* + * WAPF defines the behavior of the Fn+Fx wlan key + * The significance of values is yet to be found, but + * most of the time: + * Bit | Bluetooth | WLAN + * 0 | Hardware | Hardware + * 1 | Hardware | Software + * 4 | Software | Software + */ +static uint wapf = 1; +module_param(wapf, uint, 0444); +MODULE_PARM_DESC(wapf, "WAPF value"); + +static char *wled_type = "unknown"; +static char *bled_type = "unknown"; + +module_param(wled_type, charp, 0444); +MODULE_PARM_DESC(wled_type, "Set the wled type on boot " + "(unknown, led or rfkill). " + "default is unknown"); + +module_param(bled_type, charp, 0444); +MODULE_PARM_DESC(bled_type, "Set the bled type on boot " + "(unknown, led or rfkill). " + "default is unknown"); + +static int wlan_status = 1; +static int bluetooth_status = 1; +static int wimax_status = -1; +static int wwan_status = -1; +static int als_status; + +module_param(wlan_status, int, 0444); +MODULE_PARM_DESC(wlan_status, "Set the wireless status on boot " + "(0 = disabled, 1 = enabled, -1 = don't do anything). " + "default is -1"); + +module_param(bluetooth_status, int, 0444); +MODULE_PARM_DESC(bluetooth_status, "Set the wireless status on boot " + "(0 = disabled, 1 = enabled, -1 = don't do anything). " + "default is -1"); + +module_param(wimax_status, int, 0444); +MODULE_PARM_DESC(wimax_status, "Set the wireless status on boot " + "(0 = disabled, 1 = enabled, -1 = don't do anything). " + "default is -1"); + +module_param(wwan_status, int, 0444); +MODULE_PARM_DESC(wwan_status, "Set the wireless status on boot " + "(0 = disabled, 1 = enabled, -1 = don't do anything). " + "default is -1"); + +module_param(als_status, int, 0444); +MODULE_PARM_DESC(als_status, "Set the ALS status on boot " + "(0 = disabled, 1 = enabled). " + "default is 0"); + +/* + * Some events we use, same for all Asus + */ +#define ATKD_BRNUP_MIN 0x10 +#define ATKD_BRNUP_MAX 0x1f +#define ATKD_BRNDOWN_MIN 0x20 +#define ATKD_BRNDOWN_MAX 0x2f +#define ATKD_BRNDOWN 0x20 +#define ATKD_BRNUP 0x2f +#define ATKD_LCD_ON 0x33 +#define ATKD_LCD_OFF 0x34 + +/* + * Known bits returned by \_SB.ATKD.HWRS + */ +#define WL_HWRS 0x80 +#define BT_HWRS 0x100 + +/* + * Flags for hotk status + * WL_ON and BT_ON are also used for wireless_status() + */ +#define WL_RSTS 0x01 /* internal Wifi */ +#define BT_RSTS 0x02 /* internal Bluetooth */ +#define WM_RSTS 0x08 /* internal wimax */ +#define WW_RSTS 0x20 /* internal wwan */ + +/* WLED and BLED type */ +#define TYPE_UNKNOWN 0 +#define TYPE_LED 1 +#define TYPE_RFKILL 2 + +/* LED */ +#define METHOD_MLED "MLED" +#define METHOD_TLED "TLED" +#define METHOD_RLED "RLED" /* W1JC */ +#define METHOD_PLED "PLED" /* A7J */ +#define METHOD_GLED "GLED" /* G1, G2 (probably) */ + +/* LEDD */ +#define METHOD_LEDD "SLCM" + +/* + * Bluetooth and WLAN + * WLED and BLED are not handled like other XLED, because in some dsdt + * they also control the WLAN/Bluetooth device. + */ +#define METHOD_WLAN "WLED" +#define METHOD_BLUETOOTH "BLED" + +/* WWAN and WIMAX */ +#define METHOD_WWAN "GSMC" +#define METHOD_WIMAX "WMXC" + +#define METHOD_WL_STATUS "RSTS" + +/* Brightness */ +#define METHOD_BRIGHTNESS_SET "SPLV" +#define METHOD_BRIGHTNESS_GET "GPLV" + +/* Display */ +#define METHOD_SWITCH_DISPLAY "SDSP" + +#define METHOD_ALS_CONTROL "ALSC" /* Z71A Z71V */ +#define METHOD_ALS_LEVEL "ALSL" /* Z71A Z71V */ + +/* GPS */ +/* R2H use different handle for GPS on/off */ +#define METHOD_GPS_ON "SDON" +#define METHOD_GPS_OFF "SDOF" +#define METHOD_GPS_STATUS "GPST" + +/* Keyboard light */ +#define METHOD_KBD_LIGHT_SET "SLKB" +#define METHOD_KBD_LIGHT_GET "GLKB" + +/* For Pegatron Lucid tablet */ +#define DEVICE_NAME_PEGA "Lucid" + +#define METHOD_PEGA_ENABLE "ENPR" +#define METHOD_PEGA_DISABLE "DAPR" +#define PEGA_WLAN 0x00 +#define PEGA_BLUETOOTH 0x01 +#define PEGA_WWAN 0x02 +#define PEGA_ALS 0x04 +#define PEGA_ALS_POWER 0x05 + +#define METHOD_PEGA_READ "RDLN" +#define PEGA_READ_ALS_H 0x02 +#define PEGA_READ_ALS_L 0x03 + +#define PEGA_ACCEL_NAME "pega_accel" +#define PEGA_ACCEL_DESC "Pegatron Lucid Tablet Accelerometer" +#define METHOD_XLRX "XLRX" +#define METHOD_XLRY "XLRY" +#define METHOD_XLRZ "XLRZ" +#define PEGA_ACC_CLAMP 512 /* 1G accel is reported as ~256, so clamp to 2G */ +#define PEGA_ACC_RETRIES 3 + +/* + * Define a specific led structure to keep the main structure clean + */ +struct asus_led { + int wk; + struct work_struct work; + struct led_classdev led; + struct asus_laptop *asus; + const char *method; +}; + +/* + * Same thing for rfkill + */ +struct asus_rfkill { + /* type of control. Maps to PEGA_* values or *_RSTS */ + int control_id; + struct rfkill *rfkill; + struct asus_laptop *asus; +}; + +/* + * This is the main structure, we can use it to store anything interesting + * about the hotk device + */ +struct asus_laptop { + char *name; /* laptop name */ + + struct acpi_table_header *dsdt_info; + struct platform_device *platform_device; + struct acpi_device *device; /* the device we are in */ + struct backlight_device *backlight_device; + + struct input_dev *inputdev; + struct key_entry *keymap; + struct input_dev *pega_accel_poll; + + struct asus_led wled; + struct asus_led bled; + struct asus_led mled; + struct asus_led tled; + struct asus_led rled; + struct asus_led pled; + struct asus_led gled; + struct asus_led kled; + struct workqueue_struct *led_workqueue; + + int wled_type; + int bled_type; + int wireless_status; + bool have_rsts; + bool is_pega_lucid; + bool pega_acc_live; + int pega_acc_x; + int pega_acc_y; + int pega_acc_z; + + struct asus_rfkill wlan; + struct asus_rfkill bluetooth; + struct asus_rfkill wwan; + struct asus_rfkill wimax; + struct asus_rfkill gps; + + acpi_handle handle; /* the handle of the hotk device */ + u32 ledd_status; /* status of the LED display */ + u8 light_level; /* light sensor level */ + u8 light_switch; /* light sensor switch value */ + u16 event_count[128]; /* count for each event TODO make this better */ +}; + +static const struct key_entry asus_keymap[] = { + /* Lenovo SL Specific keycodes */ + {KE_KEY, 0x02, { KEY_SCREENLOCK } }, + {KE_KEY, 0x05, { KEY_WLAN } }, + {KE_KEY, 0x08, { KEY_F13 } }, + {KE_KEY, 0x09, { KEY_PROG2 } }, /* Dock */ + {KE_KEY, 0x17, { KEY_ZOOM } }, + {KE_KEY, 0x1f, { KEY_BATTERY } }, + /* End of Lenovo SL Specific keycodes */ + {KE_KEY, ATKD_BRNDOWN, { KEY_BRIGHTNESSDOWN } }, + {KE_KEY, ATKD_BRNUP, { KEY_BRIGHTNESSUP } }, + {KE_KEY, 0x30, { KEY_VOLUMEUP } }, + {KE_KEY, 0x31, { KEY_VOLUMEDOWN } }, + {KE_KEY, 0x32, { KEY_MUTE } }, + {KE_KEY, 0x33, { KEY_DISPLAYTOGGLE } }, /* LCD on */ + {KE_KEY, 0x34, { KEY_DISPLAY_OFF } }, /* LCD off */ + {KE_KEY, 0x40, { KEY_PREVIOUSSONG } }, + {KE_KEY, 0x41, { KEY_NEXTSONG } }, + {KE_KEY, 0x43, { KEY_STOPCD } }, /* Stop/Eject */ + {KE_KEY, 0x45, { KEY_PLAYPAUSE } }, + {KE_KEY, 0x4c, { KEY_MEDIA } }, /* WMP Key */ + {KE_KEY, 0x50, { KEY_EMAIL } }, + {KE_KEY, 0x51, { KEY_WWW } }, + {KE_KEY, 0x55, { KEY_CALC } }, + {KE_IGNORE, 0x57, }, /* Battery mode */ + {KE_IGNORE, 0x58, }, /* AC mode */ + {KE_KEY, 0x5C, { KEY_SCREENLOCK } }, /* Screenlock */ + {KE_KEY, 0x5D, { KEY_WLAN } }, /* WLAN Toggle */ + {KE_KEY, 0x5E, { KEY_WLAN } }, /* WLAN Enable */ + {KE_KEY, 0x5F, { KEY_WLAN } }, /* WLAN Disable */ + {KE_KEY, 0x60, { KEY_TOUCHPAD_ON } }, + {KE_KEY, 0x61, { KEY_SWITCHVIDEOMODE } }, /* SDSP LCD only */ + {KE_KEY, 0x62, { KEY_SWITCHVIDEOMODE } }, /* SDSP CRT only */ + {KE_KEY, 0x63, { KEY_SWITCHVIDEOMODE } }, /* SDSP LCD + CRT */ + {KE_KEY, 0x64, { KEY_SWITCHVIDEOMODE } }, /* SDSP TV */ + {KE_KEY, 0x65, { KEY_SWITCHVIDEOMODE } }, /* SDSP LCD + TV */ + {KE_KEY, 0x66, { KEY_SWITCHVIDEOMODE } }, /* SDSP CRT + TV */ + {KE_KEY, 0x67, { KEY_SWITCHVIDEOMODE } }, /* SDSP LCD + CRT + TV */ + {KE_KEY, 0x6A, { KEY_TOUCHPAD_TOGGLE } }, /* Lock Touchpad Fn + F9 */ + {KE_KEY, 0x6B, { KEY_TOUCHPAD_TOGGLE } }, /* Lock Touchpad */ + {KE_KEY, 0x6C, { KEY_SLEEP } }, /* Suspend */ + {KE_KEY, 0x6D, { KEY_SLEEP } }, /* Hibernate */ + {KE_IGNORE, 0x6E, }, /* Low Battery notification */ + {KE_KEY, 0x7D, { KEY_BLUETOOTH } }, /* Bluetooth Enable */ + {KE_KEY, 0x7E, { KEY_BLUETOOTH } }, /* Bluetooth Disable */ + {KE_KEY, 0x82, { KEY_CAMERA } }, + {KE_KEY, 0x88, { KEY_RFKILL } }, /* Radio Toggle Key */ + {KE_KEY, 0x8A, { KEY_PROG1 } }, /* Color enhancement mode */ + {KE_KEY, 0x8C, { KEY_SWITCHVIDEOMODE } }, /* SDSP DVI only */ + {KE_KEY, 0x8D, { KEY_SWITCHVIDEOMODE } }, /* SDSP LCD + DVI */ + {KE_KEY, 0x8E, { KEY_SWITCHVIDEOMODE } }, /* SDSP CRT + DVI */ + {KE_KEY, 0x8F, { KEY_SWITCHVIDEOMODE } }, /* SDSP TV + DVI */ + {KE_KEY, 0x90, { KEY_SWITCHVIDEOMODE } }, /* SDSP LCD + CRT + DVI */ + {KE_KEY, 0x91, { KEY_SWITCHVIDEOMODE } }, /* SDSP LCD + TV + DVI */ + {KE_KEY, 0x92, { KEY_SWITCHVIDEOMODE } }, /* SDSP CRT + TV + DVI */ + {KE_KEY, 0x93, { KEY_SWITCHVIDEOMODE } }, /* SDSP LCD + CRT + TV + DVI */ + {KE_KEY, 0x95, { KEY_MEDIA } }, + {KE_KEY, 0x99, { KEY_PHONE } }, + {KE_KEY, 0xA0, { KEY_SWITCHVIDEOMODE } }, /* SDSP HDMI only */ + {KE_KEY, 0xA1, { KEY_SWITCHVIDEOMODE } }, /* SDSP LCD + HDMI */ + {KE_KEY, 0xA2, { KEY_SWITCHVIDEOMODE } }, /* SDSP CRT + HDMI */ + {KE_KEY, 0xA3, { KEY_SWITCHVIDEOMODE } }, /* SDSP TV + HDMI */ + {KE_KEY, 0xA4, { KEY_SWITCHVIDEOMODE } }, /* SDSP LCD + CRT + HDMI */ + {KE_KEY, 0xA5, { KEY_SWITCHVIDEOMODE } }, /* SDSP LCD + TV + HDMI */ + {KE_KEY, 0xA6, { KEY_SWITCHVIDEOMODE } }, /* SDSP CRT + TV + HDMI */ + {KE_KEY, 0xA7, { KEY_SWITCHVIDEOMODE } }, /* SDSP LCD + CRT + TV + HDMI */ + {KE_KEY, 0xB5, { KEY_CALC } }, + {KE_KEY, 0xC4, { KEY_KBDILLUMUP } }, + {KE_KEY, 0xC5, { KEY_KBDILLUMDOWN } }, + {KE_END, 0}, +}; + + +/* + * This function evaluates an ACPI method, given an int as parameter, the + * method is searched within the scope of the handle, can be NULL. The output + * of the method is written is output, which can also be NULL + * + * returns 0 if write is successful, -1 else. + */ +static int write_acpi_int_ret(acpi_handle handle, const char *method, int val, + struct acpi_buffer *output) +{ + struct acpi_object_list params; /* list of input parameters (an int) */ + union acpi_object in_obj; /* the only param we use */ + acpi_status status; + + if (!handle) + return -1; + + params.count = 1; + params.pointer = &in_obj; + in_obj.type = ACPI_TYPE_INTEGER; + in_obj.integer.value = val; + + status = acpi_evaluate_object(handle, (char *)method, ¶ms, output); + if (status == AE_OK) + return 0; + else + return -1; +} + +static int write_acpi_int(acpi_handle handle, const char *method, int val) +{ + return write_acpi_int_ret(handle, method, val, NULL); +} + +static int acpi_check_handle(acpi_handle handle, const char *method, + acpi_handle *ret) +{ + acpi_status status; + + if (method == NULL) + return -ENODEV; + + if (ret) + status = acpi_get_handle(handle, (char *)method, + ret); + else { + acpi_handle dummy; + + status = acpi_get_handle(handle, (char *)method, + &dummy); + } + + if (status != AE_OK) { + if (ret) + pr_warn("Error finding %s\n", method); + return -ENODEV; + } + return 0; +} + +static bool asus_check_pega_lucid(struct asus_laptop *asus) +{ + return !strcmp(asus->name, DEVICE_NAME_PEGA) && + !acpi_check_handle(asus->handle, METHOD_PEGA_ENABLE, NULL) && + !acpi_check_handle(asus->handle, METHOD_PEGA_DISABLE, NULL) && + !acpi_check_handle(asus->handle, METHOD_PEGA_READ, NULL); +} + +static int asus_pega_lucid_set(struct asus_laptop *asus, int unit, bool enable) +{ + char *method = enable ? METHOD_PEGA_ENABLE : METHOD_PEGA_DISABLE; + return write_acpi_int(asus->handle, method, unit); +} + +static int pega_acc_axis(struct asus_laptop *asus, int curr, char *method) +{ + int i, delta; + unsigned long long val; + for (i = 0; i < PEGA_ACC_RETRIES; i++) { + acpi_evaluate_integer(asus->handle, method, NULL, &val); + + /* The output is noisy. From reading the ASL + * dissassembly, timeout errors are returned with 1's + * in the high word, and the lack of locking around + * thei hi/lo byte reads means that a transition + * between (for example) -1 and 0 could be read as + * 0xff00 or 0x00ff. */ + delta = abs(curr - (short)val); + if (delta < 128 && !(val & ~0xffff)) + break; + } + return clamp_val((short)val, -PEGA_ACC_CLAMP, PEGA_ACC_CLAMP); +} + +static void pega_accel_poll(struct input_dev *input) +{ + struct device *parent = input->dev.parent; + struct asus_laptop *asus = dev_get_drvdata(parent); + + /* In some cases, the very first call to poll causes a + * recursive fault under the polldev worker. This is + * apparently related to very early userspace access to the + * device, and perhaps a firmware bug. Fake the first report. */ + if (!asus->pega_acc_live) { + asus->pega_acc_live = true; + input_report_abs(input, ABS_X, 0); + input_report_abs(input, ABS_Y, 0); + input_report_abs(input, ABS_Z, 0); + input_sync(input); + return; + } + + asus->pega_acc_x = pega_acc_axis(asus, asus->pega_acc_x, METHOD_XLRX); + asus->pega_acc_y = pega_acc_axis(asus, asus->pega_acc_y, METHOD_XLRY); + asus->pega_acc_z = pega_acc_axis(asus, asus->pega_acc_z, METHOD_XLRZ); + + /* Note transform, convert to "right/up/out" in the native + * landscape orientation (i.e. the vector is the direction of + * "real up" in the device's cartiesian coordinates). */ + input_report_abs(input, ABS_X, -asus->pega_acc_x); + input_report_abs(input, ABS_Y, -asus->pega_acc_y); + input_report_abs(input, ABS_Z, asus->pega_acc_z); + input_sync(input); +} + +static void pega_accel_exit(struct asus_laptop *asus) +{ + if (asus->pega_accel_poll) { + input_unregister_device(asus->pega_accel_poll); + asus->pega_accel_poll = NULL; + } +} + +static int pega_accel_init(struct asus_laptop *asus) +{ + int err; + struct input_dev *input; + + if (!asus->is_pega_lucid) + return -ENODEV; + + if (acpi_check_handle(asus->handle, METHOD_XLRX, NULL) || + acpi_check_handle(asus->handle, METHOD_XLRY, NULL) || + acpi_check_handle(asus->handle, METHOD_XLRZ, NULL)) + return -ENODEV; + + input = input_allocate_device(); + if (!input) + return -ENOMEM; + + input->name = PEGA_ACCEL_DESC; + input->phys = PEGA_ACCEL_NAME "/input0"; + input->dev.parent = &asus->platform_device->dev; + input->id.bustype = BUS_HOST; + + input_set_abs_params(input, ABS_X, + -PEGA_ACC_CLAMP, PEGA_ACC_CLAMP, 0, 0); + input_set_abs_params(input, ABS_Y, + -PEGA_ACC_CLAMP, PEGA_ACC_CLAMP, 0, 0); + input_set_abs_params(input, ABS_Z, + -PEGA_ACC_CLAMP, PEGA_ACC_CLAMP, 0, 0); + + err = input_setup_polling(input, pega_accel_poll); + if (err) + goto exit; + + input_set_poll_interval(input, 125); + input_set_min_poll_interval(input, 50); + input_set_max_poll_interval(input, 2000); + + err = input_register_device(input); + if (err) + goto exit; + + asus->pega_accel_poll = input; + return 0; + +exit: + input_free_device(input); + return err; +} + +/* Generic LED function */ +static int asus_led_set(struct asus_laptop *asus, const char *method, + int value) +{ + if (!strcmp(method, METHOD_MLED)) + value = !value; + else if (!strcmp(method, METHOD_GLED)) + value = !value + 1; + else + value = !!value; + + return write_acpi_int(asus->handle, method, value); +} + +/* + * LEDs + */ +/* /sys/class/led handlers */ +static void asus_led_cdev_set(struct led_classdev *led_cdev, + enum led_brightness value) +{ + struct asus_led *led = container_of(led_cdev, struct asus_led, led); + struct asus_laptop *asus = led->asus; + + led->wk = !!value; + queue_work(asus->led_workqueue, &led->work); +} + +static void asus_led_cdev_update(struct work_struct *work) +{ + struct asus_led *led = container_of(work, struct asus_led, work); + struct asus_laptop *asus = led->asus; + + asus_led_set(asus, led->method, led->wk); +} + +static enum led_brightness asus_led_cdev_get(struct led_classdev *led_cdev) +{ + return led_cdev->brightness; +} + +/* + * Keyboard backlight (also a LED) + */ +static int asus_kled_lvl(struct asus_laptop *asus) +{ + unsigned long long kblv; + struct acpi_object_list params; + union acpi_object in_obj; + acpi_status rv; + + params.count = 1; + params.pointer = &in_obj; + in_obj.type = ACPI_TYPE_INTEGER; + in_obj.integer.value = 2; + + rv = acpi_evaluate_integer(asus->handle, METHOD_KBD_LIGHT_GET, + ¶ms, &kblv); + if (ACPI_FAILURE(rv)) { + pr_warn("Error reading kled level\n"); + return -ENODEV; + } + return kblv; +} + +static int asus_kled_set(struct asus_laptop *asus, int kblv) +{ + if (kblv > 0) + kblv = (1 << 7) | (kblv & 0x7F); + else + kblv = 0; + + if (write_acpi_int(asus->handle, METHOD_KBD_LIGHT_SET, kblv)) { + pr_warn("Keyboard LED display write failed\n"); + return -EINVAL; + } + return 0; +} + +static void asus_kled_cdev_set(struct led_classdev *led_cdev, + enum led_brightness value) +{ + struct asus_led *led = container_of(led_cdev, struct asus_led, led); + struct asus_laptop *asus = led->asus; + + led->wk = value; + queue_work(asus->led_workqueue, &led->work); +} + +static void asus_kled_cdev_update(struct work_struct *work) +{ + struct asus_led *led = container_of(work, struct asus_led, work); + struct asus_laptop *asus = led->asus; + + asus_kled_set(asus, led->wk); +} + +static enum led_brightness asus_kled_cdev_get(struct led_classdev *led_cdev) +{ + struct asus_led *led = container_of(led_cdev, struct asus_led, led); + struct asus_laptop *asus = led->asus; + + return asus_kled_lvl(asus); +} + +static void asus_led_exit(struct asus_laptop *asus) +{ + led_classdev_unregister(&asus->wled.led); + led_classdev_unregister(&asus->bled.led); + led_classdev_unregister(&asus->mled.led); + led_classdev_unregister(&asus->tled.led); + led_classdev_unregister(&asus->pled.led); + led_classdev_unregister(&asus->rled.led); + led_classdev_unregister(&asus->gled.led); + led_classdev_unregister(&asus->kled.led); + + if (asus->led_workqueue) { + destroy_workqueue(asus->led_workqueue); + asus->led_workqueue = NULL; + } +} + +/* Ugly macro, need to fix that later */ +static int asus_led_register(struct asus_laptop *asus, + struct asus_led *led, + const char *name, const char *method) +{ + struct led_classdev *led_cdev = &led->led; + + if (!method || acpi_check_handle(asus->handle, method, NULL)) + return 0; /* Led not present */ + + led->asus = asus; + led->method = method; + + INIT_WORK(&led->work, asus_led_cdev_update); + led_cdev->name = name; + led_cdev->brightness_set = asus_led_cdev_set; + led_cdev->brightness_get = asus_led_cdev_get; + led_cdev->max_brightness = 1; + return led_classdev_register(&asus->platform_device->dev, led_cdev); +} + +static int asus_led_init(struct asus_laptop *asus) +{ + int r = 0; + + /* + * The Pegatron Lucid has no physical leds, but all methods are + * available in the DSDT... + */ + if (asus->is_pega_lucid) + return 0; + + /* + * Functions that actually update the LED's are called from a + * workqueue. By doing this as separate work rather than when the LED + * subsystem asks, we avoid messing with the Asus ACPI stuff during a + * potentially bad time, such as a timer interrupt. + */ + asus->led_workqueue = create_singlethread_workqueue("led_workqueue"); + if (!asus->led_workqueue) + return -ENOMEM; + + if (asus->wled_type == TYPE_LED) + r = asus_led_register(asus, &asus->wled, "asus::wlan", + METHOD_WLAN); + if (r) + goto error; + if (asus->bled_type == TYPE_LED) + r = asus_led_register(asus, &asus->bled, "asus::bluetooth", + METHOD_BLUETOOTH); + if (r) + goto error; + r = asus_led_register(asus, &asus->mled, "asus::mail", METHOD_MLED); + if (r) + goto error; + r = asus_led_register(asus, &asus->tled, "asus::touchpad", METHOD_TLED); + if (r) + goto error; + r = asus_led_register(asus, &asus->rled, "asus::record", METHOD_RLED); + if (r) + goto error; + r = asus_led_register(asus, &asus->pled, "asus::phone", METHOD_PLED); + if (r) + goto error; + r = asus_led_register(asus, &asus->gled, "asus::gaming", METHOD_GLED); + if (r) + goto error; + if (!acpi_check_handle(asus->handle, METHOD_KBD_LIGHT_SET, NULL) && + !acpi_check_handle(asus->handle, METHOD_KBD_LIGHT_GET, NULL)) { + struct asus_led *led = &asus->kled; + struct led_classdev *cdev = &led->led; + + led->asus = asus; + + INIT_WORK(&led->work, asus_kled_cdev_update); + cdev->name = "asus::kbd_backlight"; + cdev->brightness_set = asus_kled_cdev_set; + cdev->brightness_get = asus_kled_cdev_get; + cdev->max_brightness = 3; + r = led_classdev_register(&asus->platform_device->dev, cdev); + } +error: + if (r) + asus_led_exit(asus); + return r; +} + +/* + * Backlight device + */ +static int asus_read_brightness(struct backlight_device *bd) +{ + struct asus_laptop *asus = bl_get_data(bd); + unsigned long long value; + acpi_status rv; + + rv = acpi_evaluate_integer(asus->handle, METHOD_BRIGHTNESS_GET, + NULL, &value); + if (ACPI_FAILURE(rv)) { + pr_warn("Error reading brightness\n"); + return 0; + } + + return value; +} + +static int asus_set_brightness(struct backlight_device *bd, int value) +{ + struct asus_laptop *asus = bl_get_data(bd); + + if (write_acpi_int(asus->handle, METHOD_BRIGHTNESS_SET, value)) { + pr_warn("Error changing brightness\n"); + return -EIO; + } + return 0; +} + +static int update_bl_status(struct backlight_device *bd) +{ + int value = bd->props.brightness; + + return asus_set_brightness(bd, value); +} + +static const struct backlight_ops asusbl_ops = { + .get_brightness = asus_read_brightness, + .update_status = update_bl_status, +}; + +static int asus_backlight_notify(struct asus_laptop *asus) +{ + struct backlight_device *bd = asus->backlight_device; + int old = bd->props.brightness; + + backlight_force_update(bd, BACKLIGHT_UPDATE_HOTKEY); + + return old; +} + +static int asus_backlight_init(struct asus_laptop *asus) +{ + struct backlight_device *bd; + struct backlight_properties props; + + if (acpi_check_handle(asus->handle, METHOD_BRIGHTNESS_GET, NULL) || + acpi_check_handle(asus->handle, METHOD_BRIGHTNESS_SET, NULL)) + return 0; + + memset(&props, 0, sizeof(struct backlight_properties)); + props.max_brightness = 15; + props.type = BACKLIGHT_PLATFORM; + + bd = backlight_device_register(ASUS_LAPTOP_FILE, + &asus->platform_device->dev, asus, + &asusbl_ops, &props); + if (IS_ERR(bd)) { + pr_err("Could not register asus backlight device\n"); + asus->backlight_device = NULL; + return PTR_ERR(bd); + } + + asus->backlight_device = bd; + bd->props.brightness = asus_read_brightness(bd); + bd->props.power = FB_BLANK_UNBLANK; + backlight_update_status(bd); + return 0; +} + +static void asus_backlight_exit(struct asus_laptop *asus) +{ + backlight_device_unregister(asus->backlight_device); + asus->backlight_device = NULL; +} + +/* + * Platform device handlers + */ + +/* + * We write our info in page, we begin at offset off and cannot write more + * than count bytes. We set eof to 1 if we handle those 2 values. We return the + * number of bytes written in page + */ +static ssize_t infos_show(struct device *dev, struct device_attribute *attr, + char *page) +{ + struct asus_laptop *asus = dev_get_drvdata(dev); + int len = 0; + unsigned long long temp; + char buf[16]; /* enough for all info */ + acpi_status rv; + + /* + * We use the easy way, we don't care of off and count, + * so we don't set eof to 1 + */ + + len += sprintf(page, ASUS_LAPTOP_NAME " " ASUS_LAPTOP_VERSION "\n"); + len += sprintf(page + len, "Model reference : %s\n", asus->name); + /* + * The SFUN method probably allows the original driver to get the list + * of features supported by a given model. For now, 0x0100 or 0x0800 + * bit signifies that the laptop is equipped with a Wi-Fi MiniPCI card. + * The significance of others is yet to be found. + */ + rv = acpi_evaluate_integer(asus->handle, "SFUN", NULL, &temp); + if (ACPI_SUCCESS(rv)) + len += sprintf(page + len, "SFUN value : %#x\n", + (uint) temp); + /* + * The HWRS method return informations about the hardware. + * 0x80 bit is for WLAN, 0x100 for Bluetooth. + * 0x40 for WWAN, 0x10 for WIMAX. + * The significance of others is yet to be found. + * We don't currently use this for device detection, and it + * takes several seconds to run on some systems. + */ + rv = acpi_evaluate_integer(asus->handle, "HWRS", NULL, &temp); + if (ACPI_SUCCESS(rv)) + len += sprintf(page + len, "HWRS value : %#x\n", + (uint) temp); + /* + * Another value for userspace: the ASYM method returns 0x02 for + * battery low and 0x04 for battery critical, its readings tend to be + * more accurate than those provided by _BST. + * Note: since not all the laptops provide this method, errors are + * silently ignored. + */ + rv = acpi_evaluate_integer(asus->handle, "ASYM", NULL, &temp); + if (ACPI_SUCCESS(rv)) + len += sprintf(page + len, "ASYM value : %#x\n", + (uint) temp); + if (asus->dsdt_info) { + snprintf(buf, 16, "%d", asus->dsdt_info->length); + len += sprintf(page + len, "DSDT length : %s\n", buf); + snprintf(buf, 16, "%d", asus->dsdt_info->checksum); + len += sprintf(page + len, "DSDT checksum : %s\n", buf); + snprintf(buf, 16, "%d", asus->dsdt_info->revision); + len += sprintf(page + len, "DSDT revision : %s\n", buf); + snprintf(buf, 7, "%s", asus->dsdt_info->oem_id); + len += sprintf(page + len, "OEM id : %s\n", buf); + snprintf(buf, 9, "%s", asus->dsdt_info->oem_table_id); + len += sprintf(page + len, "OEM table id : %s\n", buf); + snprintf(buf, 16, "%x", asus->dsdt_info->oem_revision); + len += sprintf(page + len, "OEM revision : 0x%s\n", buf); + snprintf(buf, 5, "%s", asus->dsdt_info->asl_compiler_id); + len += sprintf(page + len, "ASL comp vendor id : %s\n", buf); + snprintf(buf, 16, "%x", asus->dsdt_info->asl_compiler_revision); + len += sprintf(page + len, "ASL comp revision : 0x%s\n", buf); + } + + return len; +} +static DEVICE_ATTR_RO(infos); + +static ssize_t sysfs_acpi_set(struct asus_laptop *asus, + const char *buf, size_t count, + const char *method) +{ + int rv, value; + + rv = kstrtoint(buf, 0, &value); + if (rv < 0) + return rv; + + if (write_acpi_int(asus->handle, method, value)) + return -ENODEV; + return count; +} + +/* + * LEDD display + */ +static ssize_t ledd_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct asus_laptop *asus = dev_get_drvdata(dev); + + return sprintf(buf, "0x%08x\n", asus->ledd_status); +} + +static ssize_t ledd_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct asus_laptop *asus = dev_get_drvdata(dev); + int rv, value; + + rv = kstrtoint(buf, 0, &value); + if (rv < 0) + return rv; + + if (write_acpi_int(asus->handle, METHOD_LEDD, value)) { + pr_warn("LED display write failed\n"); + return -ENODEV; + } + + asus->ledd_status = (u32) value; + return count; +} +static DEVICE_ATTR_RW(ledd); + +/* + * Wireless + */ +static int asus_wireless_status(struct asus_laptop *asus, int mask) +{ + unsigned long long status; + acpi_status rv = AE_OK; + + if (!asus->have_rsts) + return (asus->wireless_status & mask) ? 1 : 0; + + rv = acpi_evaluate_integer(asus->handle, METHOD_WL_STATUS, + NULL, &status); + if (ACPI_FAILURE(rv)) { + pr_warn("Error reading Wireless status\n"); + return -EINVAL; + } + return !!(status & mask); +} + +/* + * WLAN + */ +static int asus_wlan_set(struct asus_laptop *asus, int status) +{ + if (write_acpi_int(asus->handle, METHOD_WLAN, !!status)) { + pr_warn("Error setting wlan status to %d\n", status); + return -EIO; + } + return 0; +} + +static ssize_t wlan_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct asus_laptop *asus = dev_get_drvdata(dev); + + return sprintf(buf, "%d\n", asus_wireless_status(asus, WL_RSTS)); +} + +static ssize_t wlan_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct asus_laptop *asus = dev_get_drvdata(dev); + + return sysfs_acpi_set(asus, buf, count, METHOD_WLAN); +} +static DEVICE_ATTR_RW(wlan); + +/*e + * Bluetooth + */ +static int asus_bluetooth_set(struct asus_laptop *asus, int status) +{ + if (write_acpi_int(asus->handle, METHOD_BLUETOOTH, !!status)) { + pr_warn("Error setting bluetooth status to %d\n", status); + return -EIO; + } + return 0; +} + +static ssize_t bluetooth_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct asus_laptop *asus = dev_get_drvdata(dev); + + return sprintf(buf, "%d\n", asus_wireless_status(asus, BT_RSTS)); +} + +static ssize_t bluetooth_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) +{ + struct asus_laptop *asus = dev_get_drvdata(dev); + + return sysfs_acpi_set(asus, buf, count, METHOD_BLUETOOTH); +} +static DEVICE_ATTR_RW(bluetooth); + +/* + * Wimax + */ +static int asus_wimax_set(struct asus_laptop *asus, int status) +{ + if (write_acpi_int(asus->handle, METHOD_WIMAX, !!status)) { + pr_warn("Error setting wimax status to %d\n", status); + return -EIO; + } + return 0; +} + +static ssize_t wimax_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct asus_laptop *asus = dev_get_drvdata(dev); + + return sprintf(buf, "%d\n", asus_wireless_status(asus, WM_RSTS)); +} + +static ssize_t wimax_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct asus_laptop *asus = dev_get_drvdata(dev); + + return sysfs_acpi_set(asus, buf, count, METHOD_WIMAX); +} +static DEVICE_ATTR_RW(wimax); + +/* + * Wwan + */ +static int asus_wwan_set(struct asus_laptop *asus, int status) +{ + if (write_acpi_int(asus->handle, METHOD_WWAN, !!status)) { + pr_warn("Error setting wwan status to %d\n", status); + return -EIO; + } + return 0; +} + +static ssize_t wwan_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct asus_laptop *asus = dev_get_drvdata(dev); + + return sprintf(buf, "%d\n", asus_wireless_status(asus, WW_RSTS)); +} + +static ssize_t wwan_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct asus_laptop *asus = dev_get_drvdata(dev); + + return sysfs_acpi_set(asus, buf, count, METHOD_WWAN); +} +static DEVICE_ATTR_RW(wwan); + +/* + * Display + */ +static void asus_set_display(struct asus_laptop *asus, int value) +{ + /* no sanity check needed for now */ + if (write_acpi_int(asus->handle, METHOD_SWITCH_DISPLAY, value)) + pr_warn("Error setting display\n"); + return; +} + +/* + * Experimental support for display switching. As of now: 1 should activate + * the LCD output, 2 should do for CRT, 4 for TV-Out and 8 for DVI. + * Any combination (bitwise) of these will suffice. I never actually tested 4 + * displays hooked up simultaneously, so be warned. See the acpi4asus README + * for more info. + */ +static ssize_t display_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct asus_laptop *asus = dev_get_drvdata(dev); + int rv, value; + + rv = kstrtoint(buf, 0, &value); + if (rv < 0) + return rv; + + asus_set_display(asus, value); + return count; +} +static DEVICE_ATTR_WO(display); + +/* + * Light Sens + */ +static void asus_als_switch(struct asus_laptop *asus, int value) +{ + int ret; + + if (asus->is_pega_lucid) { + ret = asus_pega_lucid_set(asus, PEGA_ALS, value); + if (!ret) + ret = asus_pega_lucid_set(asus, PEGA_ALS_POWER, value); + } else { + ret = write_acpi_int(asus->handle, METHOD_ALS_CONTROL, value); + } + if (ret) + pr_warn("Error setting light sensor switch\n"); + + asus->light_switch = value; +} + +static ssize_t ls_switch_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct asus_laptop *asus = dev_get_drvdata(dev); + + return sprintf(buf, "%d\n", asus->light_switch); +} + +static ssize_t ls_switch_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) +{ + struct asus_laptop *asus = dev_get_drvdata(dev); + int rv, value; + + rv = kstrtoint(buf, 0, &value); + if (rv < 0) + return rv; + + asus_als_switch(asus, value ? 1 : 0); + return count; +} +static DEVICE_ATTR_RW(ls_switch); + +static void asus_als_level(struct asus_laptop *asus, int value) +{ + if (write_acpi_int(asus->handle, METHOD_ALS_LEVEL, value)) + pr_warn("Error setting light sensor level\n"); + asus->light_level = value; +} + +static ssize_t ls_level_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct asus_laptop *asus = dev_get_drvdata(dev); + + return sprintf(buf, "%d\n", asus->light_level); +} + +static ssize_t ls_level_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct asus_laptop *asus = dev_get_drvdata(dev); + int rv, value; + + rv = kstrtoint(buf, 0, &value); + if (rv < 0) + return rv; + + value = (0 < value) ? ((15 < value) ? 15 : value) : 0; + /* 0 <= value <= 15 */ + asus_als_level(asus, value); + + return count; +} +static DEVICE_ATTR_RW(ls_level); + +static int pega_int_read(struct asus_laptop *asus, int arg, int *result) +{ + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + int err = write_acpi_int_ret(asus->handle, METHOD_PEGA_READ, arg, + &buffer); + if (!err) { + union acpi_object *obj = buffer.pointer; + if (obj && obj->type == ACPI_TYPE_INTEGER) + *result = obj->integer.value; + else + err = -EIO; + } + return err; +} + +static ssize_t ls_value_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct asus_laptop *asus = dev_get_drvdata(dev); + int err, hi, lo; + + err = pega_int_read(asus, PEGA_READ_ALS_H, &hi); + if (!err) + err = pega_int_read(asus, PEGA_READ_ALS_L, &lo); + if (!err) + return sprintf(buf, "%d\n", 10 * hi + lo); + return err; +} +static DEVICE_ATTR_RO(ls_value); + +/* + * GPS + */ +static int asus_gps_status(struct asus_laptop *asus) +{ + unsigned long long status; + acpi_status rv; + + rv = acpi_evaluate_integer(asus->handle, METHOD_GPS_STATUS, + NULL, &status); + if (ACPI_FAILURE(rv)) { + pr_warn("Error reading GPS status\n"); + return -ENODEV; + } + return !!status; +} + +static int asus_gps_switch(struct asus_laptop *asus, int status) +{ + const char *meth = status ? METHOD_GPS_ON : METHOD_GPS_OFF; + + if (write_acpi_int(asus->handle, meth, 0x02)) + return -ENODEV; + return 0; +} + +static ssize_t gps_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct asus_laptop *asus = dev_get_drvdata(dev); + + return sprintf(buf, "%d\n", asus_gps_status(asus)); +} + +static ssize_t gps_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct asus_laptop *asus = dev_get_drvdata(dev); + int rv, value; + int ret; + + rv = kstrtoint(buf, 0, &value); + if (rv < 0) + return rv; + ret = asus_gps_switch(asus, !!value); + if (ret) + return ret; + rfkill_set_sw_state(asus->gps.rfkill, !value); + return count; +} +static DEVICE_ATTR_RW(gps); + +/* + * rfkill + */ +static int asus_gps_rfkill_set(void *data, bool blocked) +{ + struct asus_laptop *asus = data; + + return asus_gps_switch(asus, !blocked); +} + +static const struct rfkill_ops asus_gps_rfkill_ops = { + .set_block = asus_gps_rfkill_set, +}; + +static int asus_rfkill_set(void *data, bool blocked) +{ + struct asus_rfkill *rfk = data; + struct asus_laptop *asus = rfk->asus; + + if (rfk->control_id == WL_RSTS) + return asus_wlan_set(asus, !blocked); + else if (rfk->control_id == BT_RSTS) + return asus_bluetooth_set(asus, !blocked); + else if (rfk->control_id == WM_RSTS) + return asus_wimax_set(asus, !blocked); + else if (rfk->control_id == WW_RSTS) + return asus_wwan_set(asus, !blocked); + + return -EINVAL; +} + +static const struct rfkill_ops asus_rfkill_ops = { + .set_block = asus_rfkill_set, +}; + +static void asus_rfkill_terminate(struct asus_rfkill *rfk) +{ + if (!rfk->rfkill) + return ; + + rfkill_unregister(rfk->rfkill); + rfkill_destroy(rfk->rfkill); + rfk->rfkill = NULL; +} + +static void asus_rfkill_exit(struct asus_laptop *asus) +{ + asus_rfkill_terminate(&asus->wwan); + asus_rfkill_terminate(&asus->bluetooth); + asus_rfkill_terminate(&asus->wlan); + asus_rfkill_terminate(&asus->gps); +} + +static int asus_rfkill_setup(struct asus_laptop *asus, struct asus_rfkill *rfk, + const char *name, int control_id, int type, + const struct rfkill_ops *ops) +{ + int result; + + rfk->control_id = control_id; + rfk->asus = asus; + rfk->rfkill = rfkill_alloc(name, &asus->platform_device->dev, + type, ops, rfk); + if (!rfk->rfkill) + return -EINVAL; + + result = rfkill_register(rfk->rfkill); + if (result) { + rfkill_destroy(rfk->rfkill); + rfk->rfkill = NULL; + } + + return result; +} + +static int asus_rfkill_init(struct asus_laptop *asus) +{ + int result = 0; + + if (asus->is_pega_lucid) + return -ENODEV; + + if (!acpi_check_handle(asus->handle, METHOD_GPS_ON, NULL) && + !acpi_check_handle(asus->handle, METHOD_GPS_OFF, NULL) && + !acpi_check_handle(asus->handle, METHOD_GPS_STATUS, NULL)) + result = asus_rfkill_setup(asus, &asus->gps, "asus-gps", + -1, RFKILL_TYPE_GPS, + &asus_gps_rfkill_ops); + if (result) + goto exit; + + + if (!acpi_check_handle(asus->handle, METHOD_WLAN, NULL) && + asus->wled_type == TYPE_RFKILL) + result = asus_rfkill_setup(asus, &asus->wlan, "asus-wlan", + WL_RSTS, RFKILL_TYPE_WLAN, + &asus_rfkill_ops); + if (result) + goto exit; + + if (!acpi_check_handle(asus->handle, METHOD_BLUETOOTH, NULL) && + asus->bled_type == TYPE_RFKILL) + result = asus_rfkill_setup(asus, &asus->bluetooth, + "asus-bluetooth", BT_RSTS, + RFKILL_TYPE_BLUETOOTH, + &asus_rfkill_ops); + if (result) + goto exit; + + if (!acpi_check_handle(asus->handle, METHOD_WWAN, NULL)) + result = asus_rfkill_setup(asus, &asus->wwan, "asus-wwan", + WW_RSTS, RFKILL_TYPE_WWAN, + &asus_rfkill_ops); + if (result) + goto exit; + + if (!acpi_check_handle(asus->handle, METHOD_WIMAX, NULL)) + result = asus_rfkill_setup(asus, &asus->wimax, "asus-wimax", + WM_RSTS, RFKILL_TYPE_WIMAX, + &asus_rfkill_ops); + if (result) + goto exit; + +exit: + if (result) + asus_rfkill_exit(asus); + + return result; +} + +static int pega_rfkill_set(void *data, bool blocked) +{ + struct asus_rfkill *rfk = data; + + int ret = asus_pega_lucid_set(rfk->asus, rfk->control_id, !blocked); + return ret; +} + +static const struct rfkill_ops pega_rfkill_ops = { + .set_block = pega_rfkill_set, +}; + +static int pega_rfkill_setup(struct asus_laptop *asus, struct asus_rfkill *rfk, + const char *name, int controlid, int rfkill_type) +{ + return asus_rfkill_setup(asus, rfk, name, controlid, rfkill_type, + &pega_rfkill_ops); +} + +static int pega_rfkill_init(struct asus_laptop *asus) +{ + int ret = 0; + + if(!asus->is_pega_lucid) + return -ENODEV; + + ret = pega_rfkill_setup(asus, &asus->wlan, "pega-wlan", + PEGA_WLAN, RFKILL_TYPE_WLAN); + if(ret) + goto exit; + + ret = pega_rfkill_setup(asus, &asus->bluetooth, "pega-bt", + PEGA_BLUETOOTH, RFKILL_TYPE_BLUETOOTH); + if(ret) + goto exit; + + ret = pega_rfkill_setup(asus, &asus->wwan, "pega-wwan", + PEGA_WWAN, RFKILL_TYPE_WWAN); + +exit: + if (ret) + asus_rfkill_exit(asus); + + return ret; +} + +/* + * Input device (i.e. hotkeys) + */ +static void asus_input_notify(struct asus_laptop *asus, int event) +{ + if (!asus->inputdev) + return ; + if (!sparse_keymap_report_event(asus->inputdev, event, 1, true)) + pr_info("Unknown key %x pressed\n", event); +} + +static int asus_input_init(struct asus_laptop *asus) +{ + struct input_dev *input; + int error; + + input = input_allocate_device(); + if (!input) + return -ENOMEM; + + input->name = "Asus Laptop extra buttons"; + input->phys = ASUS_LAPTOP_FILE "/input0"; + input->id.bustype = BUS_HOST; + input->dev.parent = &asus->platform_device->dev; + + error = sparse_keymap_setup(input, asus_keymap, NULL); + if (error) { + pr_err("Unable to setup input device keymap\n"); + goto err_free_dev; + } + error = input_register_device(input); + if (error) { + pr_warn("Unable to register input device\n"); + goto err_free_dev; + } + + asus->inputdev = input; + return 0; + +err_free_dev: + input_free_device(input); + return error; +} + +static void asus_input_exit(struct asus_laptop *asus) +{ + if (asus->inputdev) + input_unregister_device(asus->inputdev); + asus->inputdev = NULL; +} + +/* + * ACPI driver + */ +static void asus_acpi_notify(struct acpi_device *device, u32 event) +{ + struct asus_laptop *asus = acpi_driver_data(device); + u16 count; + + /* TODO Find a better way to handle events count. */ + count = asus->event_count[event % 128]++; + acpi_bus_generate_netlink_event(asus->device->pnp.device_class, + dev_name(&asus->device->dev), event, + count); + + if (event >= ATKD_BRNUP_MIN && event <= ATKD_BRNUP_MAX) + event = ATKD_BRNUP; + else if (event >= ATKD_BRNDOWN_MIN && + event <= ATKD_BRNDOWN_MAX) + event = ATKD_BRNDOWN; + + /* Brightness events are special */ + if (event == ATKD_BRNDOWN || event == ATKD_BRNUP) { + if (asus->backlight_device != NULL) { + /* Update the backlight device. */ + asus_backlight_notify(asus); + return ; + } + } + + /* Accelerometer "coarse orientation change" event */ + if (asus->pega_accel_poll && event == 0xEA) { + kobject_uevent(&asus->pega_accel_poll->dev.kobj, KOBJ_CHANGE); + return ; + } + + asus_input_notify(asus, event); +} + +static struct attribute *asus_attributes[] = { + &dev_attr_infos.attr, + &dev_attr_wlan.attr, + &dev_attr_bluetooth.attr, + &dev_attr_wimax.attr, + &dev_attr_wwan.attr, + &dev_attr_display.attr, + &dev_attr_ledd.attr, + &dev_attr_ls_value.attr, + &dev_attr_ls_level.attr, + &dev_attr_ls_switch.attr, + &dev_attr_gps.attr, + NULL +}; + +static umode_t asus_sysfs_is_visible(struct kobject *kobj, + struct attribute *attr, + int idx) +{ + struct device *dev = kobj_to_dev(kobj); + struct asus_laptop *asus = dev_get_drvdata(dev); + acpi_handle handle = asus->handle; + bool supported; + + if (asus->is_pega_lucid) { + /* no ls_level interface on the Lucid */ + if (attr == &dev_attr_ls_switch.attr) + supported = true; + else if (attr == &dev_attr_ls_level.attr) + supported = false; + else + goto normal; + + return supported ? attr->mode : 0; + } + +normal: + if (attr == &dev_attr_wlan.attr) { + supported = !acpi_check_handle(handle, METHOD_WLAN, NULL); + + } else if (attr == &dev_attr_bluetooth.attr) { + supported = !acpi_check_handle(handle, METHOD_BLUETOOTH, NULL); + + } else if (attr == &dev_attr_display.attr) { + supported = !acpi_check_handle(handle, METHOD_SWITCH_DISPLAY, NULL); + + } else if (attr == &dev_attr_wimax.attr) { + supported = + !acpi_check_handle(asus->handle, METHOD_WIMAX, NULL); + + } else if (attr == &dev_attr_wwan.attr) { + supported = !acpi_check_handle(asus->handle, METHOD_WWAN, NULL); + + } else if (attr == &dev_attr_ledd.attr) { + supported = !acpi_check_handle(handle, METHOD_LEDD, NULL); + + } else if (attr == &dev_attr_ls_switch.attr || + attr == &dev_attr_ls_level.attr) { + supported = !acpi_check_handle(handle, METHOD_ALS_CONTROL, NULL) && + !acpi_check_handle(handle, METHOD_ALS_LEVEL, NULL); + } else if (attr == &dev_attr_ls_value.attr) { + supported = asus->is_pega_lucid; + } else if (attr == &dev_attr_gps.attr) { + supported = !acpi_check_handle(handle, METHOD_GPS_ON, NULL) && + !acpi_check_handle(handle, METHOD_GPS_OFF, NULL) && + !acpi_check_handle(handle, METHOD_GPS_STATUS, NULL); + } else { + supported = true; + } + + return supported ? attr->mode : 0; +} + + +static const struct attribute_group asus_attr_group = { + .is_visible = asus_sysfs_is_visible, + .attrs = asus_attributes, +}; + +static int asus_platform_init(struct asus_laptop *asus) +{ + int result; + + asus->platform_device = platform_device_alloc(ASUS_LAPTOP_FILE, PLATFORM_DEVID_NONE); + if (!asus->platform_device) + return -ENOMEM; + platform_set_drvdata(asus->platform_device, asus); + + result = platform_device_add(asus->platform_device); + if (result) + goto fail_platform_device; + + result = sysfs_create_group(&asus->platform_device->dev.kobj, + &asus_attr_group); + if (result) + goto fail_sysfs; + + return 0; + +fail_sysfs: + platform_device_del(asus->platform_device); +fail_platform_device: + platform_device_put(asus->platform_device); + return result; +} + +static void asus_platform_exit(struct asus_laptop *asus) +{ + sysfs_remove_group(&asus->platform_device->dev.kobj, &asus_attr_group); + platform_device_unregister(asus->platform_device); +} + +static struct platform_driver platform_driver = { + .driver = { + .name = ASUS_LAPTOP_FILE, + }, +}; + +/* + * This function is used to initialize the context with right values. In this + * method, we can make all the detection we want, and modify the asus_laptop + * struct + */ +static int asus_laptop_get_info(struct asus_laptop *asus) +{ + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + union acpi_object *model = NULL; + unsigned long long bsts_result; + char *string = NULL; + acpi_status status; + + /* + * Get DSDT headers early enough to allow for differentiating between + * models, but late enough to allow acpi_bus_register_driver() to fail + * before doing anything ACPI-specific. Should we encounter a machine, + * which needs special handling (i.e. its hotkey device has a different + * HID), this bit will be moved. + */ + status = acpi_get_table(ACPI_SIG_DSDT, 1, &asus->dsdt_info); + if (ACPI_FAILURE(status)) + pr_warn("Couldn't get the DSDT table header\n"); + + /* We have to write 0 on init this far for all ASUS models */ + if (write_acpi_int_ret(asus->handle, "INIT", 0, &buffer)) { + pr_err("Hotkey initialization failed\n"); + return -ENODEV; + } + + /* This needs to be called for some laptops to init properly */ + status = + acpi_evaluate_integer(asus->handle, "BSTS", NULL, &bsts_result); + if (ACPI_FAILURE(status)) + pr_warn("Error calling BSTS\n"); + else if (bsts_result) + pr_notice("BSTS called, 0x%02x returned\n", + (uint) bsts_result); + + /* This too ... */ + if (write_acpi_int(asus->handle, "CWAP", wapf)) + pr_err("Error calling CWAP(%d)\n", wapf); + /* + * Try to match the object returned by INIT to the specific model. + * Handle every possible object (or the lack of thereof) the DSDT + * writers might throw at us. When in trouble, we pass NULL to + * asus_model_match() and try something completely different. + */ + if (buffer.pointer) { + model = buffer.pointer; + switch (model->type) { + case ACPI_TYPE_STRING: + string = model->string.pointer; + break; + case ACPI_TYPE_BUFFER: + string = model->buffer.pointer; + break; + default: + string = ""; + break; + } + } + asus->name = kstrdup(string, GFP_KERNEL); + if (!asus->name) { + kfree(buffer.pointer); + return -ENOMEM; + } + + if (string) + pr_notice(" %s model detected\n", string); + + if (!acpi_check_handle(asus->handle, METHOD_WL_STATUS, NULL)) + asus->have_rsts = true; + + kfree(model); + + return AE_OK; +} + +static int asus_acpi_init(struct asus_laptop *asus) +{ + int result = 0; + + result = acpi_bus_get_status(asus->device); + if (result) + return result; + if (!asus->device->status.present) { + pr_err("Hotkey device not present, aborting\n"); + return -ENODEV; + } + + result = asus_laptop_get_info(asus); + if (result) + return result; + + if (!strcmp(bled_type, "led")) + asus->bled_type = TYPE_LED; + else if (!strcmp(bled_type, "rfkill")) + asus->bled_type = TYPE_RFKILL; + + if (!strcmp(wled_type, "led")) + asus->wled_type = TYPE_LED; + else if (!strcmp(wled_type, "rfkill")) + asus->wled_type = TYPE_RFKILL; + + if (bluetooth_status >= 0) + asus_bluetooth_set(asus, !!bluetooth_status); + + if (wlan_status >= 0) + asus_wlan_set(asus, !!wlan_status); + + if (wimax_status >= 0) + asus_wimax_set(asus, !!wimax_status); + + if (wwan_status >= 0) + asus_wwan_set(asus, !!wwan_status); + + /* Keyboard Backlight is on by default */ + if (!acpi_check_handle(asus->handle, METHOD_KBD_LIGHT_SET, NULL)) + asus_kled_set(asus, 1); + + /* LED display is off by default */ + asus->ledd_status = 0xFFF; + + /* Set initial values of light sensor and level */ + asus->light_switch = !!als_status; + asus->light_level = 5; /* level 5 for sensor sensitivity */ + + if (asus->is_pega_lucid) { + asus_als_switch(asus, asus->light_switch); + } else if (!acpi_check_handle(asus->handle, METHOD_ALS_CONTROL, NULL) && + !acpi_check_handle(asus->handle, METHOD_ALS_LEVEL, NULL)) { + asus_als_switch(asus, asus->light_switch); + asus_als_level(asus, asus->light_level); + } + + return result; +} + +static void asus_dmi_check(void) +{ + const char *model; + + model = dmi_get_system_info(DMI_PRODUCT_NAME); + if (!model) + return; + + /* On L1400B WLED control the sound card, don't mess with it ... */ + if (strncmp(model, "L1400B", 6) == 0) { + wlan_status = -1; + } +} + +static bool asus_device_present; + +static int asus_acpi_add(struct acpi_device *device) +{ + struct asus_laptop *asus; + int result; + + pr_notice("Asus Laptop Support version %s\n", + ASUS_LAPTOP_VERSION); + asus = kzalloc(sizeof(struct asus_laptop), GFP_KERNEL); + if (!asus) + return -ENOMEM; + asus->handle = device->handle; + strcpy(acpi_device_name(device), ASUS_LAPTOP_DEVICE_NAME); + strcpy(acpi_device_class(device), ASUS_LAPTOP_CLASS); + device->driver_data = asus; + asus->device = device; + + asus_dmi_check(); + + result = asus_acpi_init(asus); + if (result) + goto fail_platform; + + /* + * Need platform type detection first, then the platform + * device. It is used as a parent for the sub-devices below. + */ + asus->is_pega_lucid = asus_check_pega_lucid(asus); + result = asus_platform_init(asus); + if (result) + goto fail_platform; + + if (acpi_video_get_backlight_type() == acpi_backlight_vendor) { + result = asus_backlight_init(asus); + if (result) + goto fail_backlight; + } + + result = asus_input_init(asus); + if (result) + goto fail_input; + + result = asus_led_init(asus); + if (result) + goto fail_led; + + result = asus_rfkill_init(asus); + if (result && result != -ENODEV) + goto fail_rfkill; + + result = pega_accel_init(asus); + if (result && result != -ENODEV) + goto fail_pega_accel; + + result = pega_rfkill_init(asus); + if (result && result != -ENODEV) + goto fail_pega_rfkill; + + asus_device_present = true; + return 0; + +fail_pega_rfkill: + pega_accel_exit(asus); +fail_pega_accel: + asus_rfkill_exit(asus); +fail_rfkill: + asus_led_exit(asus); +fail_led: + asus_input_exit(asus); +fail_input: + asus_backlight_exit(asus); +fail_backlight: + asus_platform_exit(asus); +fail_platform: + kfree(asus); + + return result; +} + +static int asus_acpi_remove(struct acpi_device *device) +{ + struct asus_laptop *asus = acpi_driver_data(device); + + asus_backlight_exit(asus); + asus_rfkill_exit(asus); + asus_led_exit(asus); + asus_input_exit(asus); + pega_accel_exit(asus); + asus_platform_exit(asus); + + kfree(asus->name); + kfree(asus); + return 0; +} + +static const struct acpi_device_id asus_device_ids[] = { + {"ATK0100", 0}, + {"ATK0101", 0}, + {"", 0}, +}; +MODULE_DEVICE_TABLE(acpi, asus_device_ids); + +static struct acpi_driver asus_acpi_driver = { + .name = ASUS_LAPTOP_NAME, + .class = ASUS_LAPTOP_CLASS, + .owner = THIS_MODULE, + .ids = asus_device_ids, + .flags = ACPI_DRIVER_ALL_NOTIFY_EVENTS, + .ops = { + .add = asus_acpi_add, + .remove = asus_acpi_remove, + .notify = asus_acpi_notify, + }, +}; + +static int __init asus_laptop_init(void) +{ + int result; + + result = platform_driver_register(&platform_driver); + if (result < 0) + return result; + + result = acpi_bus_register_driver(&asus_acpi_driver); + if (result < 0) + goto fail_acpi_driver; + if (!asus_device_present) { + result = -ENODEV; + goto fail_no_device; + } + return 0; + +fail_no_device: + acpi_bus_unregister_driver(&asus_acpi_driver); +fail_acpi_driver: + platform_driver_unregister(&platform_driver); + return result; +} + +static void __exit asus_laptop_exit(void) +{ + acpi_bus_unregister_driver(&asus_acpi_driver); + platform_driver_unregister(&platform_driver); +} + +module_init(asus_laptop_init); +module_exit(asus_laptop_exit); |