diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/pwm/pwm-pca9685.c | 678 |
1 files changed, 678 insertions, 0 deletions
diff --git a/drivers/pwm/pwm-pca9685.c b/drivers/pwm/pwm-pca9685.c new file mode 100644 index 000000000..41be244e7 --- /dev/null +++ b/drivers/pwm/pwm-pca9685.c @@ -0,0 +1,678 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Driver for PCA9685 16-channel 12-bit PWM LED controller + * + * Copyright (C) 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de> + * Copyright (C) 2015 Clemens Gruber <clemens.gruber@pqgruber.com> + * + * based on the pwm-twl-led.c driver + */ + +#include <linux/acpi.h> +#include <linux/gpio/driver.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/platform_device.h> +#include <linux/property.h> +#include <linux/pwm.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/pm_runtime.h> +#include <linux/bitmap.h> + +/* + * Because the PCA9685 has only one prescaler per chip, only the first channel + * that is enabled is allowed to change the prescale register. + * PWM channels requested afterwards must use a period that results in the same + * prescale setting as the one set by the first requested channel. + * GPIOs do not count as enabled PWMs as they are not using the prescaler. + */ + +#define PCA9685_MODE1 0x00 +#define PCA9685_MODE2 0x01 +#define PCA9685_SUBADDR1 0x02 +#define PCA9685_SUBADDR2 0x03 +#define PCA9685_SUBADDR3 0x04 +#define PCA9685_ALLCALLADDR 0x05 +#define PCA9685_LEDX_ON_L 0x06 +#define PCA9685_LEDX_ON_H 0x07 +#define PCA9685_LEDX_OFF_L 0x08 +#define PCA9685_LEDX_OFF_H 0x09 + +#define PCA9685_ALL_LED_ON_L 0xFA +#define PCA9685_ALL_LED_ON_H 0xFB +#define PCA9685_ALL_LED_OFF_L 0xFC +#define PCA9685_ALL_LED_OFF_H 0xFD +#define PCA9685_PRESCALE 0xFE + +#define PCA9685_PRESCALE_MIN 0x03 /* => max. frequency of 1526 Hz */ +#define PCA9685_PRESCALE_MAX 0xFF /* => min. frequency of 24 Hz */ + +#define PCA9685_COUNTER_RANGE 4096 +#define PCA9685_OSC_CLOCK_MHZ 25 /* Internal oscillator with 25 MHz */ + +#define PCA9685_NUMREGS 0xFF +#define PCA9685_MAXCHAN 0x10 + +#define LED_FULL BIT(4) +#define MODE1_ALLCALL BIT(0) +#define MODE1_SUB3 BIT(1) +#define MODE1_SUB2 BIT(2) +#define MODE1_SUB1 BIT(3) +#define MODE1_SLEEP BIT(4) +#define MODE2_INVRT BIT(4) +#define MODE2_OUTDRV BIT(2) + +#define LED_N_ON_H(N) (PCA9685_LEDX_ON_H + (4 * (N))) +#define LED_N_ON_L(N) (PCA9685_LEDX_ON_L + (4 * (N))) +#define LED_N_OFF_H(N) (PCA9685_LEDX_OFF_H + (4 * (N))) +#define LED_N_OFF_L(N) (PCA9685_LEDX_OFF_L + (4 * (N))) + +#define REG_ON_H(C) ((C) >= PCA9685_MAXCHAN ? PCA9685_ALL_LED_ON_H : LED_N_ON_H((C))) +#define REG_ON_L(C) ((C) >= PCA9685_MAXCHAN ? PCA9685_ALL_LED_ON_L : LED_N_ON_L((C))) +#define REG_OFF_H(C) ((C) >= PCA9685_MAXCHAN ? PCA9685_ALL_LED_OFF_H : LED_N_OFF_H((C))) +#define REG_OFF_L(C) ((C) >= PCA9685_MAXCHAN ? PCA9685_ALL_LED_OFF_L : LED_N_OFF_L((C))) + +struct pca9685 { + struct pwm_chip chip; + struct regmap *regmap; + struct mutex lock; + DECLARE_BITMAP(pwms_enabled, PCA9685_MAXCHAN + 1); +#if IS_ENABLED(CONFIG_GPIOLIB) + struct gpio_chip gpio; + DECLARE_BITMAP(pwms_inuse, PCA9685_MAXCHAN + 1); +#endif +}; + +static inline struct pca9685 *to_pca(struct pwm_chip *chip) +{ + return container_of(chip, struct pca9685, chip); +} + +/* This function is supposed to be called with the lock mutex held */ +static bool pca9685_prescaler_can_change(struct pca9685 *pca, int channel) +{ + /* No PWM enabled: Change allowed */ + if (bitmap_empty(pca->pwms_enabled, PCA9685_MAXCHAN + 1)) + return true; + /* More than one PWM enabled: Change not allowed */ + if (bitmap_weight(pca->pwms_enabled, PCA9685_MAXCHAN + 1) > 1) + return false; + /* + * Only one PWM enabled: Change allowed if the PWM about to + * be changed is the one that is already enabled + */ + return test_bit(channel, pca->pwms_enabled); +} + +static int pca9685_read_reg(struct pca9685 *pca, unsigned int reg, unsigned int *val) +{ + struct device *dev = pca->chip.dev; + int err; + + err = regmap_read(pca->regmap, reg, val); + if (err) + dev_err(dev, "regmap_read of register 0x%x failed: %pe\n", reg, ERR_PTR(err)); + + return err; +} + +static int pca9685_write_reg(struct pca9685 *pca, unsigned int reg, unsigned int val) +{ + struct device *dev = pca->chip.dev; + int err; + + err = regmap_write(pca->regmap, reg, val); + if (err) + dev_err(dev, "regmap_write to register 0x%x failed: %pe\n", reg, ERR_PTR(err)); + + return err; +} + +/* Helper function to set the duty cycle ratio to duty/4096 (e.g. duty=2048 -> 50%) */ +static void pca9685_pwm_set_duty(struct pca9685 *pca, int channel, unsigned int duty) +{ + struct pwm_device *pwm = &pca->chip.pwms[channel]; + unsigned int on, off; + + if (duty == 0) { + /* Set the full OFF bit, which has the highest precedence */ + pca9685_write_reg(pca, REG_OFF_H(channel), LED_FULL); + return; + } else if (duty >= PCA9685_COUNTER_RANGE) { + /* Set the full ON bit and clear the full OFF bit */ + pca9685_write_reg(pca, REG_ON_H(channel), LED_FULL); + pca9685_write_reg(pca, REG_OFF_H(channel), 0); + return; + } + + + if (pwm->state.usage_power && channel < PCA9685_MAXCHAN) { + /* + * If usage_power is set, the pca9685 driver will phase shift + * the individual channels relative to their channel number. + * This improves EMI because the enabled channels no longer + * turn on at the same time, while still maintaining the + * configured duty cycle / power output. + */ + on = channel * PCA9685_COUNTER_RANGE / PCA9685_MAXCHAN; + } else + on = 0; + + off = (on + duty) % PCA9685_COUNTER_RANGE; + + /* Set ON time (clears full ON bit) */ + pca9685_write_reg(pca, REG_ON_L(channel), on & 0xff); + pca9685_write_reg(pca, REG_ON_H(channel), (on >> 8) & 0xf); + /* Set OFF time (clears full OFF bit) */ + pca9685_write_reg(pca, REG_OFF_L(channel), off & 0xff); + pca9685_write_reg(pca, REG_OFF_H(channel), (off >> 8) & 0xf); +} + +static unsigned int pca9685_pwm_get_duty(struct pca9685 *pca, int channel) +{ + struct pwm_device *pwm = &pca->chip.pwms[channel]; + unsigned int off = 0, on = 0, val = 0; + + if (WARN_ON(channel >= PCA9685_MAXCHAN)) { + /* HW does not support reading state of "all LEDs" channel */ + return 0; + } + + pca9685_read_reg(pca, LED_N_OFF_H(channel), &off); + if (off & LED_FULL) { + /* Full OFF bit is set */ + return 0; + } + + pca9685_read_reg(pca, LED_N_ON_H(channel), &on); + if (on & LED_FULL) { + /* Full ON bit is set */ + return PCA9685_COUNTER_RANGE; + } + + pca9685_read_reg(pca, LED_N_OFF_L(channel), &val); + off = ((off & 0xf) << 8) | (val & 0xff); + if (!pwm->state.usage_power) + return off; + + /* Read ON register to calculate duty cycle of staggered output */ + if (pca9685_read_reg(pca, LED_N_ON_L(channel), &val)) { + /* Reset val to 0 in case reading LED_N_ON_L failed */ + val = 0; + } + on = ((on & 0xf) << 8) | (val & 0xff); + return (off - on) & (PCA9685_COUNTER_RANGE - 1); +} + +#if IS_ENABLED(CONFIG_GPIOLIB) +static bool pca9685_pwm_test_and_set_inuse(struct pca9685 *pca, int pwm_idx) +{ + bool is_inuse; + + mutex_lock(&pca->lock); + if (pwm_idx >= PCA9685_MAXCHAN) { + /* + * "All LEDs" channel: + * pretend already in use if any of the PWMs are requested + */ + if (!bitmap_empty(pca->pwms_inuse, PCA9685_MAXCHAN)) { + is_inuse = true; + goto out; + } + } else { + /* + * Regular channel: + * pretend already in use if the "all LEDs" channel is requested + */ + if (test_bit(PCA9685_MAXCHAN, pca->pwms_inuse)) { + is_inuse = true; + goto out; + } + } + is_inuse = test_and_set_bit(pwm_idx, pca->pwms_inuse); +out: + mutex_unlock(&pca->lock); + return is_inuse; +} + +static void pca9685_pwm_clear_inuse(struct pca9685 *pca, int pwm_idx) +{ + mutex_lock(&pca->lock); + clear_bit(pwm_idx, pca->pwms_inuse); + mutex_unlock(&pca->lock); +} + +static int pca9685_pwm_gpio_request(struct gpio_chip *gpio, unsigned int offset) +{ + struct pca9685 *pca = gpiochip_get_data(gpio); + + if (pca9685_pwm_test_and_set_inuse(pca, offset)) + return -EBUSY; + pm_runtime_get_sync(pca->chip.dev); + return 0; +} + +static int pca9685_pwm_gpio_get(struct gpio_chip *gpio, unsigned int offset) +{ + struct pca9685 *pca = gpiochip_get_data(gpio); + + return pca9685_pwm_get_duty(pca, offset) != 0; +} + +static void pca9685_pwm_gpio_set(struct gpio_chip *gpio, unsigned int offset, + int value) +{ + struct pca9685 *pca = gpiochip_get_data(gpio); + + pca9685_pwm_set_duty(pca, offset, value ? PCA9685_COUNTER_RANGE : 0); +} + +static void pca9685_pwm_gpio_free(struct gpio_chip *gpio, unsigned int offset) +{ + struct pca9685 *pca = gpiochip_get_data(gpio); + + pca9685_pwm_set_duty(pca, offset, 0); + pm_runtime_put(pca->chip.dev); + pca9685_pwm_clear_inuse(pca, offset); +} + +static int pca9685_pwm_gpio_get_direction(struct gpio_chip *chip, + unsigned int offset) +{ + /* Always out */ + return GPIO_LINE_DIRECTION_OUT; +} + +static int pca9685_pwm_gpio_direction_input(struct gpio_chip *gpio, + unsigned int offset) +{ + return -EINVAL; +} + +static int pca9685_pwm_gpio_direction_output(struct gpio_chip *gpio, + unsigned int offset, int value) +{ + pca9685_pwm_gpio_set(gpio, offset, value); + + return 0; +} + +/* + * The PCA9685 has a bit for turning the PWM output full off or on. Some + * boards like Intel Galileo actually uses these as normal GPIOs so we + * expose a GPIO chip here which can exclusively take over the underlying + * PWM channel. + */ +static int pca9685_pwm_gpio_probe(struct pca9685 *pca) +{ + struct device *dev = pca->chip.dev; + + pca->gpio.label = dev_name(dev); + pca->gpio.parent = dev; + pca->gpio.request = pca9685_pwm_gpio_request; + pca->gpio.free = pca9685_pwm_gpio_free; + pca->gpio.get_direction = pca9685_pwm_gpio_get_direction; + pca->gpio.direction_input = pca9685_pwm_gpio_direction_input; + pca->gpio.direction_output = pca9685_pwm_gpio_direction_output; + pca->gpio.get = pca9685_pwm_gpio_get; + pca->gpio.set = pca9685_pwm_gpio_set; + pca->gpio.base = -1; + pca->gpio.ngpio = PCA9685_MAXCHAN; + pca->gpio.can_sleep = true; + + return devm_gpiochip_add_data(dev, &pca->gpio, pca); +} +#else +static inline bool pca9685_pwm_test_and_set_inuse(struct pca9685 *pca, + int pwm_idx) +{ + return false; +} + +static inline void +pca9685_pwm_clear_inuse(struct pca9685 *pca, int pwm_idx) +{ +} + +static inline int pca9685_pwm_gpio_probe(struct pca9685 *pca) +{ + return 0; +} +#endif + +static void pca9685_set_sleep_mode(struct pca9685 *pca, bool enable) +{ + struct device *dev = pca->chip.dev; + int err = regmap_update_bits(pca->regmap, PCA9685_MODE1, + MODE1_SLEEP, enable ? MODE1_SLEEP : 0); + if (err) { + dev_err(dev, "regmap_update_bits of register 0x%x failed: %pe\n", + PCA9685_MODE1, ERR_PTR(err)); + return; + } + + if (!enable) { + /* Wait 500us for the oscillator to be back up */ + udelay(500); + } +} + +static int __pca9685_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, + const struct pwm_state *state) +{ + struct pca9685 *pca = to_pca(chip); + unsigned long long duty, prescale; + unsigned int val = 0; + + if (state->polarity != PWM_POLARITY_NORMAL) + return -EINVAL; + + prescale = DIV_ROUND_CLOSEST_ULL(PCA9685_OSC_CLOCK_MHZ * state->period, + PCA9685_COUNTER_RANGE * 1000) - 1; + if (prescale < PCA9685_PRESCALE_MIN || prescale > PCA9685_PRESCALE_MAX) { + dev_err(chip->dev, "pwm not changed: period out of bounds!\n"); + return -EINVAL; + } + + if (!state->enabled) { + pca9685_pwm_set_duty(pca, pwm->hwpwm, 0); + return 0; + } + + pca9685_read_reg(pca, PCA9685_PRESCALE, &val); + if (prescale != val) { + if (!pca9685_prescaler_can_change(pca, pwm->hwpwm)) { + dev_err(chip->dev, + "pwm not changed: periods of enabled pwms must match!\n"); + return -EBUSY; + } + + /* + * Putting the chip briefly into SLEEP mode + * at this point won't interfere with the + * pm_runtime framework, because the pm_runtime + * state is guaranteed active here. + */ + /* Put chip into sleep mode */ + pca9685_set_sleep_mode(pca, true); + + /* Change the chip-wide output frequency */ + pca9685_write_reg(pca, PCA9685_PRESCALE, prescale); + + /* Wake the chip up */ + pca9685_set_sleep_mode(pca, false); + } + + duty = PCA9685_COUNTER_RANGE * state->duty_cycle; + duty = DIV_ROUND_UP_ULL(duty, state->period); + pca9685_pwm_set_duty(pca, pwm->hwpwm, duty); + return 0; +} + +static int pca9685_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, + const struct pwm_state *state) +{ + struct pca9685 *pca = to_pca(chip); + int ret; + + mutex_lock(&pca->lock); + ret = __pca9685_pwm_apply(chip, pwm, state); + if (ret == 0) { + if (state->enabled) + set_bit(pwm->hwpwm, pca->pwms_enabled); + else + clear_bit(pwm->hwpwm, pca->pwms_enabled); + } + mutex_unlock(&pca->lock); + + return ret; +} + +static int pca9685_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm, + struct pwm_state *state) +{ + struct pca9685 *pca = to_pca(chip); + unsigned long long duty; + unsigned int val = 0; + + /* Calculate (chip-wide) period from prescale value */ + pca9685_read_reg(pca, PCA9685_PRESCALE, &val); + /* + * PCA9685_OSC_CLOCK_MHZ is 25, i.e. an integer divider of 1000. + * The following calculation is therefore only a multiplication + * and we are not losing precision. + */ + state->period = (PCA9685_COUNTER_RANGE * 1000 / PCA9685_OSC_CLOCK_MHZ) * + (val + 1); + + /* The (per-channel) polarity is fixed */ + state->polarity = PWM_POLARITY_NORMAL; + + if (pwm->hwpwm >= PCA9685_MAXCHAN) { + /* + * The "all LEDs" channel does not support HW readout + * Return 0 and disabled for backwards compatibility + */ + state->duty_cycle = 0; + state->enabled = false; + return 0; + } + + state->enabled = true; + duty = pca9685_pwm_get_duty(pca, pwm->hwpwm); + state->duty_cycle = DIV_ROUND_DOWN_ULL(duty * state->period, PCA9685_COUNTER_RANGE); + + return 0; +} + +static int pca9685_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct pca9685 *pca = to_pca(chip); + + if (pca9685_pwm_test_and_set_inuse(pca, pwm->hwpwm)) + return -EBUSY; + + if (pwm->hwpwm < PCA9685_MAXCHAN) { + /* PWMs - except the "all LEDs" channel - default to enabled */ + mutex_lock(&pca->lock); + set_bit(pwm->hwpwm, pca->pwms_enabled); + mutex_unlock(&pca->lock); + } + + pm_runtime_get_sync(chip->dev); + + return 0; +} + +static void pca9685_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct pca9685 *pca = to_pca(chip); + + mutex_lock(&pca->lock); + pca9685_pwm_set_duty(pca, pwm->hwpwm, 0); + clear_bit(pwm->hwpwm, pca->pwms_enabled); + mutex_unlock(&pca->lock); + + pm_runtime_put(chip->dev); + pca9685_pwm_clear_inuse(pca, pwm->hwpwm); +} + +static const struct pwm_ops pca9685_pwm_ops = { + .apply = pca9685_pwm_apply, + .get_state = pca9685_pwm_get_state, + .request = pca9685_pwm_request, + .free = pca9685_pwm_free, + .owner = THIS_MODULE, +}; + +static const struct regmap_config pca9685_regmap_i2c_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = PCA9685_NUMREGS, + .cache_type = REGCACHE_NONE, +}; + +static int pca9685_pwm_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct pca9685 *pca; + unsigned int reg; + int ret; + + pca = devm_kzalloc(&client->dev, sizeof(*pca), GFP_KERNEL); + if (!pca) + return -ENOMEM; + + pca->regmap = devm_regmap_init_i2c(client, &pca9685_regmap_i2c_config); + if (IS_ERR(pca->regmap)) { + ret = PTR_ERR(pca->regmap); + dev_err(&client->dev, "Failed to initialize register map: %d\n", + ret); + return ret; + } + + i2c_set_clientdata(client, pca); + + mutex_init(&pca->lock); + + ret = pca9685_read_reg(pca, PCA9685_MODE2, ®); + if (ret) + return ret; + + if (device_property_read_bool(&client->dev, "invert")) + reg |= MODE2_INVRT; + else + reg &= ~MODE2_INVRT; + + if (device_property_read_bool(&client->dev, "open-drain")) + reg &= ~MODE2_OUTDRV; + else + reg |= MODE2_OUTDRV; + + ret = pca9685_write_reg(pca, PCA9685_MODE2, reg); + if (ret) + return ret; + + /* Disable all LED ALLCALL and SUBx addresses to avoid bus collisions */ + pca9685_read_reg(pca, PCA9685_MODE1, ®); + reg &= ~(MODE1_ALLCALL | MODE1_SUB1 | MODE1_SUB2 | MODE1_SUB3); + pca9685_write_reg(pca, PCA9685_MODE1, reg); + + /* Reset OFF/ON registers to POR default */ + pca9685_write_reg(pca, PCA9685_ALL_LED_OFF_L, 0); + pca9685_write_reg(pca, PCA9685_ALL_LED_OFF_H, LED_FULL); + pca9685_write_reg(pca, PCA9685_ALL_LED_ON_L, 0); + pca9685_write_reg(pca, PCA9685_ALL_LED_ON_H, LED_FULL); + + pca->chip.ops = &pca9685_pwm_ops; + /* Add an extra channel for ALL_LED */ + pca->chip.npwm = PCA9685_MAXCHAN + 1; + + pca->chip.dev = &client->dev; + + ret = pwmchip_add(&pca->chip); + if (ret < 0) + return ret; + + ret = pca9685_pwm_gpio_probe(pca); + if (ret < 0) { + pwmchip_remove(&pca->chip); + return ret; + } + + pm_runtime_enable(&client->dev); + + if (pm_runtime_enabled(&client->dev)) { + /* + * Although the chip comes out of power-up in the sleep state, + * we force it to sleep in case it was woken up before + */ + pca9685_set_sleep_mode(pca, true); + pm_runtime_set_suspended(&client->dev); + } else { + /* Wake the chip up if runtime PM is disabled */ + pca9685_set_sleep_mode(pca, false); + } + + return 0; +} + +static void pca9685_pwm_remove(struct i2c_client *client) +{ + struct pca9685 *pca = i2c_get_clientdata(client); + + pwmchip_remove(&pca->chip); + + if (!pm_runtime_enabled(&client->dev)) { + /* Put chip in sleep state if runtime PM is disabled */ + pca9685_set_sleep_mode(pca, true); + } + + pm_runtime_disable(&client->dev); +} + +static int __maybe_unused pca9685_pwm_runtime_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct pca9685 *pca = i2c_get_clientdata(client); + + pca9685_set_sleep_mode(pca, true); + return 0; +} + +static int __maybe_unused pca9685_pwm_runtime_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct pca9685 *pca = i2c_get_clientdata(client); + + pca9685_set_sleep_mode(pca, false); + return 0; +} + +static const struct i2c_device_id pca9685_id[] = { + { "pca9685", 0 }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(i2c, pca9685_id); + +#ifdef CONFIG_ACPI +static const struct acpi_device_id pca9685_acpi_ids[] = { + { "INT3492", 0 }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(acpi, pca9685_acpi_ids); +#endif + +#ifdef CONFIG_OF +static const struct of_device_id pca9685_dt_ids[] = { + { .compatible = "nxp,pca9685-pwm", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, pca9685_dt_ids); +#endif + +static const struct dev_pm_ops pca9685_pwm_pm = { + SET_RUNTIME_PM_OPS(pca9685_pwm_runtime_suspend, + pca9685_pwm_runtime_resume, NULL) +}; + +static struct i2c_driver pca9685_i2c_driver = { + .driver = { + .name = "pca9685-pwm", + .acpi_match_table = ACPI_PTR(pca9685_acpi_ids), + .of_match_table = of_match_ptr(pca9685_dt_ids), + .pm = &pca9685_pwm_pm, + }, + .probe = pca9685_pwm_probe, + .remove = pca9685_pwm_remove, + .id_table = pca9685_id, +}; + +module_i2c_driver(pca9685_i2c_driver); + +MODULE_AUTHOR("Steffen Trumtrar <s.trumtrar@pengutronix.de>"); +MODULE_DESCRIPTION("PWM driver for PCA9685"); +MODULE_LICENSE("GPL"); |