diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/regulator/helpers.c | 968 |
1 files changed, 968 insertions, 0 deletions
diff --git a/drivers/regulator/helpers.c b/drivers/regulator/helpers.c new file mode 100644 index 000000000..ad2237a95 --- /dev/null +++ b/drivers/regulator/helpers.c @@ -0,0 +1,968 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// +// helpers.c -- Voltage/Current Regulator framework helper functions. +// +// Copyright 2007, 2008 Wolfson Microelectronics PLC. +// Copyright 2008 SlimLogic Ltd. + +#include <linux/kernel.h> +#include <linux/err.h> +#include <linux/delay.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> +#include <linux/regulator/driver.h> +#include <linux/module.h> + +#include "internal.h" + +/** + * regulator_is_enabled_regmap - standard is_enabled() for regmap users + * + * @rdev: regulator to operate on + * + * Regulators that use regmap for their register I/O can set the + * enable_reg and enable_mask fields in their descriptor and then use + * this as their is_enabled operation, saving some code. + */ +int regulator_is_enabled_regmap(struct regulator_dev *rdev) +{ + unsigned int val; + int ret; + + ret = regmap_read(rdev->regmap, rdev->desc->enable_reg, &val); + if (ret != 0) + return ret; + + val &= rdev->desc->enable_mask; + + if (rdev->desc->enable_is_inverted) { + if (rdev->desc->enable_val) + return val != rdev->desc->enable_val; + return val == 0; + } else { + if (rdev->desc->enable_val) + return val == rdev->desc->enable_val; + return val != 0; + } +} +EXPORT_SYMBOL_GPL(regulator_is_enabled_regmap); + +/** + * regulator_enable_regmap - standard enable() for regmap users + * + * @rdev: regulator to operate on + * + * Regulators that use regmap for their register I/O can set the + * enable_reg and enable_mask fields in their descriptor and then use + * this as their enable() operation, saving some code. + */ +int regulator_enable_regmap(struct regulator_dev *rdev) +{ + unsigned int val; + + if (rdev->desc->enable_is_inverted) { + val = rdev->desc->disable_val; + } else { + val = rdev->desc->enable_val; + if (!val) + val = rdev->desc->enable_mask; + } + + return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, + rdev->desc->enable_mask, val); +} +EXPORT_SYMBOL_GPL(regulator_enable_regmap); + +/** + * regulator_disable_regmap - standard disable() for regmap users + * + * @rdev: regulator to operate on + * + * Regulators that use regmap for their register I/O can set the + * enable_reg and enable_mask fields in their descriptor and then use + * this as their disable() operation, saving some code. + */ +int regulator_disable_regmap(struct regulator_dev *rdev) +{ + unsigned int val; + + if (rdev->desc->enable_is_inverted) { + val = rdev->desc->enable_val; + if (!val) + val = rdev->desc->enable_mask; + } else { + val = rdev->desc->disable_val; + } + + return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, + rdev->desc->enable_mask, val); +} +EXPORT_SYMBOL_GPL(regulator_disable_regmap); + +static int regulator_range_selector_to_index(struct regulator_dev *rdev, + unsigned int rval) +{ + int i; + + if (!rdev->desc->linear_range_selectors) + return -EINVAL; + + rval &= rdev->desc->vsel_range_mask; + + for (i = 0; i < rdev->desc->n_linear_ranges; i++) { + if (rdev->desc->linear_range_selectors[i] == rval) + return i; + } + return -EINVAL; +} + +/** + * regulator_get_voltage_sel_pickable_regmap - pickable range get_voltage_sel + * + * @rdev: regulator to operate on + * + * Regulators that use regmap for their register I/O and use pickable + * ranges can set the vsel_reg, vsel_mask, vsel_range_reg and vsel_range_mask + * fields in their descriptor and then use this as their get_voltage_vsel + * operation, saving some code. + */ +int regulator_get_voltage_sel_pickable_regmap(struct regulator_dev *rdev) +{ + unsigned int r_val; + int range; + unsigned int val; + int ret; + unsigned int voltages = 0; + const struct linear_range *r = rdev->desc->linear_ranges; + + if (!r) + return -EINVAL; + + ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &val); + if (ret != 0) + return ret; + + ret = regmap_read(rdev->regmap, rdev->desc->vsel_range_reg, &r_val); + if (ret != 0) + return ret; + + val &= rdev->desc->vsel_mask; + val >>= ffs(rdev->desc->vsel_mask) - 1; + + range = regulator_range_selector_to_index(rdev, r_val); + if (range < 0) + return -EINVAL; + + voltages = linear_range_values_in_range_array(r, range); + + return val + voltages; +} +EXPORT_SYMBOL_GPL(regulator_get_voltage_sel_pickable_regmap); + +/** + * regulator_set_voltage_sel_pickable_regmap - pickable range set_voltage_sel + * + * @rdev: regulator to operate on + * @sel: Selector to set + * + * Regulators that use regmap for their register I/O and use pickable + * ranges can set the vsel_reg, vsel_mask, vsel_range_reg and vsel_range_mask + * fields in their descriptor and then use this as their set_voltage_vsel + * operation, saving some code. + */ +int regulator_set_voltage_sel_pickable_regmap(struct regulator_dev *rdev, + unsigned int sel) +{ + unsigned int range; + int ret, i; + unsigned int voltages_in_range = 0; + + for (i = 0; i < rdev->desc->n_linear_ranges; i++) { + const struct linear_range *r; + + r = &rdev->desc->linear_ranges[i]; + voltages_in_range = linear_range_values_in_range(r); + + if (sel < voltages_in_range) + break; + sel -= voltages_in_range; + } + + if (i == rdev->desc->n_linear_ranges) + return -EINVAL; + + sel <<= ffs(rdev->desc->vsel_mask) - 1; + sel += rdev->desc->linear_ranges[i].min_sel; + + range = rdev->desc->linear_range_selectors[i]; + + if (rdev->desc->vsel_reg == rdev->desc->vsel_range_reg) { + ret = regmap_update_bits(rdev->regmap, + rdev->desc->vsel_reg, + rdev->desc->vsel_range_mask | + rdev->desc->vsel_mask, sel | range); + } else { + ret = regmap_update_bits(rdev->regmap, + rdev->desc->vsel_range_reg, + rdev->desc->vsel_range_mask, range); + if (ret) + return ret; + + ret = regmap_update_bits(rdev->regmap, rdev->desc->vsel_reg, + rdev->desc->vsel_mask, sel); + } + + if (ret) + return ret; + + if (rdev->desc->apply_bit) + ret = regmap_update_bits(rdev->regmap, rdev->desc->apply_reg, + rdev->desc->apply_bit, + rdev->desc->apply_bit); + return ret; +} +EXPORT_SYMBOL_GPL(regulator_set_voltage_sel_pickable_regmap); + +/** + * regulator_get_voltage_sel_regmap - standard get_voltage_sel for regmap users + * + * @rdev: regulator to operate on + * + * Regulators that use regmap for their register I/O can set the + * vsel_reg and vsel_mask fields in their descriptor and then use this + * as their get_voltage_vsel operation, saving some code. + */ +int regulator_get_voltage_sel_regmap(struct regulator_dev *rdev) +{ + unsigned int val; + int ret; + + ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &val); + if (ret != 0) + return ret; + + val &= rdev->desc->vsel_mask; + val >>= ffs(rdev->desc->vsel_mask) - 1; + + return val; +} +EXPORT_SYMBOL_GPL(regulator_get_voltage_sel_regmap); + +/** + * regulator_set_voltage_sel_regmap - standard set_voltage_sel for regmap users + * + * @rdev: regulator to operate on + * @sel: Selector to set + * + * Regulators that use regmap for their register I/O can set the + * vsel_reg and vsel_mask fields in their descriptor and then use this + * as their set_voltage_vsel operation, saving some code. + */ +int regulator_set_voltage_sel_regmap(struct regulator_dev *rdev, unsigned sel) +{ + int ret; + + sel <<= ffs(rdev->desc->vsel_mask) - 1; + + ret = regmap_update_bits(rdev->regmap, rdev->desc->vsel_reg, + rdev->desc->vsel_mask, sel); + if (ret) + return ret; + + if (rdev->desc->apply_bit) + ret = regmap_update_bits(rdev->regmap, rdev->desc->apply_reg, + rdev->desc->apply_bit, + rdev->desc->apply_bit); + return ret; +} +EXPORT_SYMBOL_GPL(regulator_set_voltage_sel_regmap); + +/** + * regulator_map_voltage_iterate - map_voltage() based on list_voltage() + * + * @rdev: Regulator to operate on + * @min_uV: Lower bound for voltage + * @max_uV: Upper bound for voltage + * + * Drivers implementing set_voltage_sel() and list_voltage() can use + * this as their map_voltage() operation. It will find a suitable + * voltage by calling list_voltage() until it gets something in bounds + * for the requested voltages. + */ +int regulator_map_voltage_iterate(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + int best_val = INT_MAX; + int selector = 0; + int i, ret; + + /* Find the smallest voltage that falls within the specified + * range. + */ + for (i = 0; i < rdev->desc->n_voltages; i++) { + ret = rdev->desc->ops->list_voltage(rdev, i); + if (ret < 0) + continue; + + if (ret < best_val && ret >= min_uV && ret <= max_uV) { + best_val = ret; + selector = i; + } + } + + if (best_val != INT_MAX) + return selector; + else + return -EINVAL; +} +EXPORT_SYMBOL_GPL(regulator_map_voltage_iterate); + +/** + * regulator_map_voltage_ascend - map_voltage() for ascendant voltage list + * + * @rdev: Regulator to operate on + * @min_uV: Lower bound for voltage + * @max_uV: Upper bound for voltage + * + * Drivers that have ascendant voltage list can use this as their + * map_voltage() operation. + */ +int regulator_map_voltage_ascend(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + int i, ret; + + for (i = 0; i < rdev->desc->n_voltages; i++) { + ret = rdev->desc->ops->list_voltage(rdev, i); + if (ret < 0) + continue; + + if (ret > max_uV) + break; + + if (ret >= min_uV && ret <= max_uV) + return i; + } + + return -EINVAL; +} +EXPORT_SYMBOL_GPL(regulator_map_voltage_ascend); + +/** + * regulator_map_voltage_linear - map_voltage() for simple linear mappings + * + * @rdev: Regulator to operate on + * @min_uV: Lower bound for voltage + * @max_uV: Upper bound for voltage + * + * Drivers providing min_uV and uV_step in their regulator_desc can + * use this as their map_voltage() operation. + */ +int regulator_map_voltage_linear(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + int ret, voltage; + + /* Allow uV_step to be 0 for fixed voltage */ + if (rdev->desc->n_voltages == 1 && rdev->desc->uV_step == 0) { + if (min_uV <= rdev->desc->min_uV && rdev->desc->min_uV <= max_uV) + return 0; + else + return -EINVAL; + } + + if (!rdev->desc->uV_step) { + BUG_ON(!rdev->desc->uV_step); + return -EINVAL; + } + + if (min_uV < rdev->desc->min_uV) + min_uV = rdev->desc->min_uV; + + ret = DIV_ROUND_UP(min_uV - rdev->desc->min_uV, rdev->desc->uV_step); + if (ret < 0) + return ret; + + ret += rdev->desc->linear_min_sel; + + /* Map back into a voltage to verify we're still in bounds */ + voltage = rdev->desc->ops->list_voltage(rdev, ret); + if (voltage < min_uV || voltage > max_uV) + return -EINVAL; + + return ret; +} +EXPORT_SYMBOL_GPL(regulator_map_voltage_linear); + +/** + * regulator_map_voltage_linear_range - map_voltage() for multiple linear ranges + * + * @rdev: Regulator to operate on + * @min_uV: Lower bound for voltage + * @max_uV: Upper bound for voltage + * + * Drivers providing linear_ranges in their descriptor can use this as + * their map_voltage() callback. + */ +int regulator_map_voltage_linear_range(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + const struct linear_range *range; + int ret = -EINVAL; + unsigned int sel; + bool found; + int voltage, i; + + if (!rdev->desc->n_linear_ranges) { + BUG_ON(!rdev->desc->n_linear_ranges); + return -EINVAL; + } + + for (i = 0; i < rdev->desc->n_linear_ranges; i++) { + range = &rdev->desc->linear_ranges[i]; + + ret = linear_range_get_selector_high(range, min_uV, &sel, + &found); + if (ret) + continue; + ret = sel; + + /* + * Map back into a voltage to verify we're still in bounds. + * If we are not, then continue checking rest of the ranges. + */ + voltage = rdev->desc->ops->list_voltage(rdev, sel); + if (voltage >= min_uV && voltage <= max_uV) + break; + } + + if (i == rdev->desc->n_linear_ranges) + return -EINVAL; + + return ret; +} +EXPORT_SYMBOL_GPL(regulator_map_voltage_linear_range); + +/** + * regulator_map_voltage_pickable_linear_range - map_voltage, pickable ranges + * + * @rdev: Regulator to operate on + * @min_uV: Lower bound for voltage + * @max_uV: Upper bound for voltage + * + * Drivers providing pickable linear_ranges in their descriptor can use + * this as their map_voltage() callback. + */ +int regulator_map_voltage_pickable_linear_range(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + const struct linear_range *range; + int ret = -EINVAL; + int voltage, i; + unsigned int selector = 0; + + if (!rdev->desc->n_linear_ranges) { + BUG_ON(!rdev->desc->n_linear_ranges); + return -EINVAL; + } + + for (i = 0; i < rdev->desc->n_linear_ranges; i++) { + int linear_max_uV; + bool found; + unsigned int sel; + + range = &rdev->desc->linear_ranges[i]; + linear_max_uV = linear_range_get_max_value(range); + + if (!(min_uV <= linear_max_uV && max_uV >= range->min)) { + selector += linear_range_values_in_range(range); + continue; + } + + ret = linear_range_get_selector_high(range, min_uV, &sel, + &found); + if (ret) { + selector += linear_range_values_in_range(range); + continue; + } + + ret = selector + sel - range->min_sel; + + voltage = rdev->desc->ops->list_voltage(rdev, ret); + + /* + * Map back into a voltage to verify we're still in bounds. + * We may have overlapping voltage ranges. Hence we don't + * exit but retry until we have checked all ranges. + */ + if (voltage < min_uV || voltage > max_uV) + selector += linear_range_values_in_range(range); + else + break; + } + + if (i == rdev->desc->n_linear_ranges) + return -EINVAL; + + return ret; +} +EXPORT_SYMBOL_GPL(regulator_map_voltage_pickable_linear_range); + +/** + * regulator_desc_list_voltage_linear - List voltages with simple calculation + * + * @desc: Regulator desc for regulator which volatges are to be listed + * @selector: Selector to convert into a voltage + * + * Regulators with a simple linear mapping between voltages and + * selectors can set min_uV and uV_step in the regulator descriptor + * and then use this function prior regulator registration to list + * the voltages. This is useful when voltages need to be listed during + * device-tree parsing. + */ +int regulator_desc_list_voltage_linear(const struct regulator_desc *desc, + unsigned int selector) +{ + if (selector >= desc->n_voltages) + return -EINVAL; + + if (selector < desc->linear_min_sel) + return 0; + + selector -= desc->linear_min_sel; + + return desc->min_uV + (desc->uV_step * selector); +} +EXPORT_SYMBOL_GPL(regulator_desc_list_voltage_linear); + +/** + * regulator_list_voltage_linear - List voltages with simple calculation + * + * @rdev: Regulator device + * @selector: Selector to convert into a voltage + * + * Regulators with a simple linear mapping between voltages and + * selectors can set min_uV and uV_step in the regulator descriptor + * and then use this function as their list_voltage() operation, + */ +int regulator_list_voltage_linear(struct regulator_dev *rdev, + unsigned int selector) +{ + return regulator_desc_list_voltage_linear(rdev->desc, selector); +} +EXPORT_SYMBOL_GPL(regulator_list_voltage_linear); + +/** + * regulator_list_voltage_pickable_linear_range - pickable range list voltages + * + * @rdev: Regulator device + * @selector: Selector to convert into a voltage + * + * list_voltage() operation, intended to be used by drivers utilizing pickable + * ranges helpers. + */ +int regulator_list_voltage_pickable_linear_range(struct regulator_dev *rdev, + unsigned int selector) +{ + const struct linear_range *range; + int i; + unsigned int all_sels = 0; + + if (!rdev->desc->n_linear_ranges) { + BUG_ON(!rdev->desc->n_linear_ranges); + return -EINVAL; + } + + for (i = 0; i < rdev->desc->n_linear_ranges; i++) { + unsigned int sel_indexes; + + range = &rdev->desc->linear_ranges[i]; + + sel_indexes = linear_range_values_in_range(range) - 1; + + if (all_sels + sel_indexes >= selector) { + selector -= all_sels; + /* + * As we see here, pickable ranges work only as + * long as the first selector for each pickable + * range is 0, and the each subsequent range for + * this 'pick' follow immediately at next unused + * selector (Eg. there is no gaps between ranges). + * I think this is fine but it probably should be + * documented. OTOH, whole pickable range stuff + * might benefit from some documentation + */ + return range->min + (range->step * selector); + } + + all_sels += (sel_indexes + 1); + } + + return -EINVAL; +} +EXPORT_SYMBOL_GPL(regulator_list_voltage_pickable_linear_range); + +/** + * regulator_desc_list_voltage_linear_range - List voltages for linear ranges + * + * @desc: Regulator desc for regulator which volatges are to be listed + * @selector: Selector to convert into a voltage + * + * Regulators with a series of simple linear mappings between voltages + * and selectors who have set linear_ranges in the regulator descriptor + * can use this function prior regulator registration to list voltages. + * This is useful when voltages need to be listed during device-tree + * parsing. + */ +int regulator_desc_list_voltage_linear_range(const struct regulator_desc *desc, + unsigned int selector) +{ + unsigned int val; + int ret; + + BUG_ON(!desc->n_linear_ranges); + + ret = linear_range_get_value_array(desc->linear_ranges, + desc->n_linear_ranges, selector, + &val); + if (ret) + return ret; + + return val; +} +EXPORT_SYMBOL_GPL(regulator_desc_list_voltage_linear_range); + +/** + * regulator_list_voltage_linear_range - List voltages for linear ranges + * + * @rdev: Regulator device + * @selector: Selector to convert into a voltage + * + * Regulators with a series of simple linear mappings between voltages + * and selectors can set linear_ranges in the regulator descriptor and + * then use this function as their list_voltage() operation, + */ +int regulator_list_voltage_linear_range(struct regulator_dev *rdev, + unsigned int selector) +{ + return regulator_desc_list_voltage_linear_range(rdev->desc, selector); +} +EXPORT_SYMBOL_GPL(regulator_list_voltage_linear_range); + +/** + * regulator_list_voltage_table - List voltages with table based mapping + * + * @rdev: Regulator device + * @selector: Selector to convert into a voltage + * + * Regulators with table based mapping between voltages and + * selectors can set volt_table in the regulator descriptor + * and then use this function as their list_voltage() operation. + */ +int regulator_list_voltage_table(struct regulator_dev *rdev, + unsigned int selector) +{ + if (!rdev->desc->volt_table) { + BUG_ON(!rdev->desc->volt_table); + return -EINVAL; + } + + if (selector >= rdev->desc->n_voltages) + return -EINVAL; + if (selector < rdev->desc->linear_min_sel) + return 0; + + return rdev->desc->volt_table[selector]; +} +EXPORT_SYMBOL_GPL(regulator_list_voltage_table); + +/** + * regulator_set_bypass_regmap - Default set_bypass() using regmap + * + * @rdev: device to operate on. + * @enable: state to set. + */ +int regulator_set_bypass_regmap(struct regulator_dev *rdev, bool enable) +{ + unsigned int val; + + if (enable) { + val = rdev->desc->bypass_val_on; + if (!val) + val = rdev->desc->bypass_mask; + } else { + val = rdev->desc->bypass_val_off; + } + + return regmap_update_bits(rdev->regmap, rdev->desc->bypass_reg, + rdev->desc->bypass_mask, val); +} +EXPORT_SYMBOL_GPL(regulator_set_bypass_regmap); + +/** + * regulator_set_soft_start_regmap - Default set_soft_start() using regmap + * + * @rdev: device to operate on. + */ +int regulator_set_soft_start_regmap(struct regulator_dev *rdev) +{ + unsigned int val; + + val = rdev->desc->soft_start_val_on; + if (!val) + val = rdev->desc->soft_start_mask; + + return regmap_update_bits(rdev->regmap, rdev->desc->soft_start_reg, + rdev->desc->soft_start_mask, val); +} +EXPORT_SYMBOL_GPL(regulator_set_soft_start_regmap); + +/** + * regulator_set_pull_down_regmap - Default set_pull_down() using regmap + * + * @rdev: device to operate on. + */ +int regulator_set_pull_down_regmap(struct regulator_dev *rdev) +{ + unsigned int val; + + val = rdev->desc->pull_down_val_on; + if (!val) + val = rdev->desc->pull_down_mask; + + return regmap_update_bits(rdev->regmap, rdev->desc->pull_down_reg, + rdev->desc->pull_down_mask, val); +} +EXPORT_SYMBOL_GPL(regulator_set_pull_down_regmap); + +/** + * regulator_get_bypass_regmap - Default get_bypass() using regmap + * + * @rdev: device to operate on. + * @enable: current state. + */ +int regulator_get_bypass_regmap(struct regulator_dev *rdev, bool *enable) +{ + unsigned int val; + unsigned int val_on = rdev->desc->bypass_val_on; + int ret; + + ret = regmap_read(rdev->regmap, rdev->desc->bypass_reg, &val); + if (ret != 0) + return ret; + + if (!val_on) + val_on = rdev->desc->bypass_mask; + + *enable = (val & rdev->desc->bypass_mask) == val_on; + + return 0; +} +EXPORT_SYMBOL_GPL(regulator_get_bypass_regmap); + +/** + * regulator_set_active_discharge_regmap - Default set_active_discharge() + * using regmap + * + * @rdev: device to operate on. + * @enable: state to set, 0 to disable and 1 to enable. + */ +int regulator_set_active_discharge_regmap(struct regulator_dev *rdev, + bool enable) +{ + unsigned int val; + + if (enable) + val = rdev->desc->active_discharge_on; + else + val = rdev->desc->active_discharge_off; + + return regmap_update_bits(rdev->regmap, + rdev->desc->active_discharge_reg, + rdev->desc->active_discharge_mask, val); +} +EXPORT_SYMBOL_GPL(regulator_set_active_discharge_regmap); + +/** + * regulator_set_current_limit_regmap - set_current_limit for regmap users + * + * @rdev: regulator to operate on + * @min_uA: Lower bound for current limit + * @max_uA: Upper bound for current limit + * + * Regulators that use regmap for their register I/O can set curr_table, + * csel_reg and csel_mask fields in their descriptor and then use this + * as their set_current_limit operation, saving some code. + */ +int regulator_set_current_limit_regmap(struct regulator_dev *rdev, + int min_uA, int max_uA) +{ + unsigned int n_currents = rdev->desc->n_current_limits; + int i, sel = -1; + + if (n_currents == 0) + return -EINVAL; + + if (rdev->desc->curr_table) { + const unsigned int *curr_table = rdev->desc->curr_table; + bool ascend = curr_table[n_currents - 1] > curr_table[0]; + + /* search for closest to maximum */ + if (ascend) { + for (i = n_currents - 1; i >= 0; i--) { + if (min_uA <= curr_table[i] && + curr_table[i] <= max_uA) { + sel = i; + break; + } + } + } else { + for (i = 0; i < n_currents; i++) { + if (min_uA <= curr_table[i] && + curr_table[i] <= max_uA) { + sel = i; + break; + } + } + } + } + + if (sel < 0) + return -EINVAL; + + sel <<= ffs(rdev->desc->csel_mask) - 1; + + return regmap_update_bits(rdev->regmap, rdev->desc->csel_reg, + rdev->desc->csel_mask, sel); +} +EXPORT_SYMBOL_GPL(regulator_set_current_limit_regmap); + +/** + * regulator_get_current_limit_regmap - get_current_limit for regmap users + * + * @rdev: regulator to operate on + * + * Regulators that use regmap for their register I/O can set the + * csel_reg and csel_mask fields in their descriptor and then use this + * as their get_current_limit operation, saving some code. + */ +int regulator_get_current_limit_regmap(struct regulator_dev *rdev) +{ + unsigned int val; + int ret; + + ret = regmap_read(rdev->regmap, rdev->desc->csel_reg, &val); + if (ret != 0) + return ret; + + val &= rdev->desc->csel_mask; + val >>= ffs(rdev->desc->csel_mask) - 1; + + if (rdev->desc->curr_table) { + if (val >= rdev->desc->n_current_limits) + return -EINVAL; + + return rdev->desc->curr_table[val]; + } + + return -EINVAL; +} +EXPORT_SYMBOL_GPL(regulator_get_current_limit_regmap); + +/** + * regulator_bulk_set_supply_names - initialize the 'supply' fields in an array + * of regulator_bulk_data structs + * + * @consumers: array of regulator_bulk_data entries to initialize + * @supply_names: array of supply name strings + * @num_supplies: number of supply names to initialize + * + * Note: the 'consumers' array must be the size of 'num_supplies'. + */ +void regulator_bulk_set_supply_names(struct regulator_bulk_data *consumers, + const char *const *supply_names, + unsigned int num_supplies) +{ + unsigned int i; + + for (i = 0; i < num_supplies; i++) + consumers[i].supply = supply_names[i]; +} +EXPORT_SYMBOL_GPL(regulator_bulk_set_supply_names); + +/** + * regulator_is_equal - test whether two regulators are the same + * + * @reg1: first regulator to operate on + * @reg2: second regulator to operate on + */ +bool regulator_is_equal(struct regulator *reg1, struct regulator *reg2) +{ + return reg1->rdev == reg2->rdev; +} +EXPORT_SYMBOL_GPL(regulator_is_equal); + +static int find_closest_bigger(unsigned int target, const unsigned int *table, + unsigned int num_sel, unsigned int *sel) +{ + unsigned int s, tmp, max, maxsel = 0; + bool found = false; + + max = table[0]; + + for (s = 0; s < num_sel; s++) { + if (table[s] > max) { + max = table[s]; + maxsel = s; + } + if (table[s] >= target) { + if (!found || table[s] - target < tmp - target) { + tmp = table[s]; + *sel = s; + found = true; + if (tmp == target) + break; + } + } + } + + if (!found) { + *sel = maxsel; + return -EINVAL; + } + + return 0; +} + +/** + * regulator_set_ramp_delay_regmap - set_ramp_delay() helper + * + * @rdev: regulator to operate on + * + * Regulators that use regmap for their register I/O can set the ramp_reg + * and ramp_mask fields in their descriptor and then use this as their + * set_ramp_delay operation, saving some code. + */ +int regulator_set_ramp_delay_regmap(struct regulator_dev *rdev, int ramp_delay) +{ + int ret; + unsigned int sel; + + if (WARN_ON(!rdev->desc->n_ramp_values || !rdev->desc->ramp_delay_table)) + return -EINVAL; + + ret = find_closest_bigger(ramp_delay, rdev->desc->ramp_delay_table, + rdev->desc->n_ramp_values, &sel); + + if (ret) { + dev_warn(rdev_get_dev(rdev), + "Can't set ramp-delay %u, setting %u\n", ramp_delay, + rdev->desc->ramp_delay_table[sel]); + } + + sel <<= ffs(rdev->desc->ramp_mask) - 1; + + return regmap_update_bits(rdev->regmap, rdev->desc->ramp_reg, + rdev->desc->ramp_mask, sel); +} +EXPORT_SYMBOL_GPL(regulator_set_ramp_delay_regmap); |