summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/FlashPoint.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/FlashPoint.c')
-rw-r--r--drivers/scsi/FlashPoint.c7560
1 files changed, 7560 insertions, 0 deletions
diff --git a/drivers/scsi/FlashPoint.c b/drivers/scsi/FlashPoint.c
new file mode 100644
index 000000000..3d9c56ac8
--- /dev/null
+++ b/drivers/scsi/FlashPoint.c
@@ -0,0 +1,7560 @@
+/*
+
+ FlashPoint.c -- FlashPoint SCCB Manager for Linux
+
+ This file contains the FlashPoint SCCB Manager from BusLogic's FlashPoint
+ Driver Developer's Kit, with minor modifications by Leonard N. Zubkoff for
+ Linux compatibility. It was provided by BusLogic in the form of 16 separate
+ source files, which would have unnecessarily cluttered the scsi directory, so
+ the individual files have been combined into this single file.
+
+ Copyright 1995-1996 by Mylex Corporation. All Rights Reserved
+
+ This file is available under both the GNU General Public License
+ and a BSD-style copyright; see LICENSE.FlashPoint for details.
+
+*/
+
+
+#ifdef CONFIG_SCSI_FLASHPOINT
+
+#define MAX_CARDS 8
+#undef BUSTYPE_PCI
+
+#define CRCMASK 0xA001
+
+#define FAILURE 0xFFFFFFFFL
+
+struct sccb;
+typedef void (*CALL_BK_FN) (struct sccb *);
+
+struct sccb_mgr_info {
+ u32 si_baseaddr;
+ unsigned char si_present;
+ unsigned char si_intvect;
+ unsigned char si_id;
+ unsigned char si_lun;
+ u16 si_fw_revision;
+ u16 si_per_targ_init_sync;
+ u16 si_per_targ_fast_nego;
+ u16 si_per_targ_ultra_nego;
+ u16 si_per_targ_no_disc;
+ u16 si_per_targ_wide_nego;
+ u16 si_mflags;
+ unsigned char si_card_family;
+ unsigned char si_bustype;
+ unsigned char si_card_model[3];
+ unsigned char si_relative_cardnum;
+ unsigned char si_reserved[4];
+ u32 si_OS_reserved;
+ unsigned char si_XlatInfo[4];
+ u32 si_reserved2[5];
+ u32 si_secondary_range;
+};
+
+#define SCSI_PARITY_ENA 0x0001
+#define LOW_BYTE_TERM 0x0010
+#define HIGH_BYTE_TERM 0x0020
+#define BUSTYPE_PCI 0x3
+
+#define SUPPORT_16TAR_32LUN 0x0002
+#define SOFT_RESET 0x0004
+#define EXTENDED_TRANSLATION 0x0008
+#define POST_ALL_UNDERRRUNS 0x0040
+#define FLAG_SCAM_ENABLED 0x0080
+#define FLAG_SCAM_LEVEL2 0x0100
+
+#define HARPOON_FAMILY 0x02
+
+/* SCCB struct used for both SCCB and UCB manager compiles!
+ * The UCB Manager treats the SCCB as it's 'native hardware structure'
+ */
+
+/*#pragma pack(1)*/
+struct sccb {
+ unsigned char OperationCode;
+ unsigned char ControlByte;
+ unsigned char CdbLength;
+ unsigned char RequestSenseLength;
+ u32 DataLength;
+ void *DataPointer;
+ unsigned char CcbRes[2];
+ unsigned char HostStatus;
+ unsigned char TargetStatus;
+ unsigned char TargID;
+ unsigned char Lun;
+ unsigned char Cdb[12];
+ unsigned char CcbRes1;
+ unsigned char Reserved1;
+ u32 Reserved2;
+ u32 SensePointer;
+
+ CALL_BK_FN SccbCallback; /* VOID (*SccbCallback)(); */
+ u32 SccbIOPort; /* Identifies board base port */
+ unsigned char SccbStatus;
+ unsigned char SCCBRes2;
+ u16 SccbOSFlags;
+
+ u32 Sccb_XferCnt; /* actual transfer count */
+ u32 Sccb_ATC;
+ u32 SccbVirtDataPtr; /* virtual addr for OS/2 */
+ u32 Sccb_res1;
+ u16 Sccb_MGRFlags;
+ u16 Sccb_sgseg;
+ unsigned char Sccb_scsimsg; /* identify msg for selection */
+ unsigned char Sccb_tag;
+ unsigned char Sccb_scsistat;
+ unsigned char Sccb_idmsg; /* image of last msg in */
+ struct sccb *Sccb_forwardlink;
+ struct sccb *Sccb_backlink;
+ u32 Sccb_savedATC;
+ unsigned char Save_Cdb[6];
+ unsigned char Save_CdbLen;
+ unsigned char Sccb_XferState;
+ u32 Sccb_SGoffset;
+};
+
+#pragma pack()
+
+#define SCATTER_GATHER_COMMAND 0x02
+#define RESIDUAL_COMMAND 0x03
+#define RESIDUAL_SG_COMMAND 0x04
+#define RESET_COMMAND 0x81
+
+#define F_USE_CMD_Q 0x20 /*Inidcates TAGGED command. */
+#define TAG_TYPE_MASK 0xC0 /*Type of tag msg to send. */
+#define SCCB_DATA_XFER_OUT 0x10 /* Write */
+#define SCCB_DATA_XFER_IN 0x08 /* Read */
+
+#define NO_AUTO_REQUEST_SENSE 0x01 /* No Request Sense Buffer */
+
+#define BUS_FREE_ST 0
+#define SELECT_ST 1
+#define SELECT_BDR_ST 2 /* Select w\ Bus Device Reset */
+#define SELECT_SN_ST 3 /* Select w\ Sync Nego */
+#define SELECT_WN_ST 4 /* Select w\ Wide Data Nego */
+#define SELECT_Q_ST 5 /* Select w\ Tagged Q'ing */
+#define COMMAND_ST 6
+#define DATA_OUT_ST 7
+#define DATA_IN_ST 8
+#define DISCONNECT_ST 9
+#define ABORT_ST 11
+
+#define F_HOST_XFER_DIR 0x01
+#define F_ALL_XFERRED 0x02
+#define F_SG_XFER 0x04
+#define F_AUTO_SENSE 0x08
+#define F_ODD_BALL_CNT 0x10
+#define F_NO_DATA_YET 0x80
+
+#define F_STATUSLOADED 0x01
+#define F_DEV_SELECTED 0x04
+
+#define SCCB_COMPLETE 0x00 /* SCCB completed without error */
+#define SCCB_DATA_UNDER_RUN 0x0C
+#define SCCB_SELECTION_TIMEOUT 0x11 /* Set SCSI selection timed out */
+#define SCCB_DATA_OVER_RUN 0x12
+#define SCCB_PHASE_SEQUENCE_FAIL 0x14 /* Target bus phase sequence failure */
+
+#define SCCB_GROSS_FW_ERR 0x27 /* Major problem! */
+#define SCCB_BM_ERR 0x30 /* BusMaster error. */
+#define SCCB_PARITY_ERR 0x34 /* SCSI parity error */
+
+#define SCCB_IN_PROCESS 0x00
+#define SCCB_SUCCESS 0x01
+#define SCCB_ABORT 0x02
+#define SCCB_ERROR 0x04
+
+#define ORION_FW_REV 3110
+
+#define QUEUE_DEPTH 254+1 /*1 for Normal disconnect 32 for Q'ing. */
+
+#define MAX_MB_CARDS 4 /* Max. no of cards suppoerted on Mother Board */
+
+#define MAX_SCSI_TAR 16
+#define MAX_LUN 32
+#define LUN_MASK 0x1f
+
+#define SG_BUF_CNT 16 /*Number of prefetched elements. */
+
+#define SG_ELEMENT_SIZE 8 /*Eight byte per element. */
+
+#define RD_HARPOON(ioport) inb((u32)ioport)
+#define RDW_HARPOON(ioport) inw((u32)ioport)
+#define RD_HARP32(ioport,offset,data) (data = inl((u32)(ioport + offset)))
+#define WR_HARPOON(ioport,val) outb((u8) val, (u32)ioport)
+#define WRW_HARPOON(ioport,val) outw((u16)val, (u32)ioport)
+#define WR_HARP32(ioport,offset,data) outl(data, (u32)(ioport + offset))
+
+#define TAR_SYNC_MASK (BIT(7)+BIT(6))
+#define SYNC_TRYING BIT(6)
+#define SYNC_SUPPORTED (BIT(7)+BIT(6))
+
+#define TAR_WIDE_MASK (BIT(5)+BIT(4))
+#define WIDE_ENABLED BIT(4)
+#define WIDE_NEGOCIATED BIT(5)
+
+#define TAR_TAG_Q_MASK (BIT(3)+BIT(2))
+#define TAG_Q_TRYING BIT(2)
+#define TAG_Q_REJECT BIT(3)
+
+#define TAR_ALLOW_DISC BIT(0)
+
+#define EE_SYNC_MASK (BIT(0)+BIT(1))
+#define EE_SYNC_5MB BIT(0)
+#define EE_SYNC_10MB BIT(1)
+#define EE_SYNC_20MB (BIT(0)+BIT(1))
+
+#define EE_WIDE_SCSI BIT(7)
+
+struct sccb_mgr_tar_info {
+
+ struct sccb *TarSelQ_Head;
+ struct sccb *TarSelQ_Tail;
+ unsigned char TarLUN_CA; /*Contingent Allgiance */
+ unsigned char TarTagQ_Cnt;
+ unsigned char TarSelQ_Cnt;
+ unsigned char TarStatus;
+ unsigned char TarEEValue;
+ unsigned char TarSyncCtrl;
+ unsigned char TarReserved[2]; /* for alignment */
+ unsigned char LunDiscQ_Idx[MAX_LUN];
+ unsigned char TarLUNBusy[MAX_LUN];
+};
+
+struct nvram_info {
+ unsigned char niModel; /* Model No. of card */
+ unsigned char niCardNo; /* Card no. */
+ u32 niBaseAddr; /* Port Address of card */
+ unsigned char niSysConf; /* Adapter Configuration byte -
+ Byte 16 of eeprom map */
+ unsigned char niScsiConf; /* SCSI Configuration byte -
+ Byte 17 of eeprom map */
+ unsigned char niScamConf; /* SCAM Configuration byte -
+ Byte 20 of eeprom map */
+ unsigned char niAdapId; /* Host Adapter ID -
+ Byte 24 of eerpom map */
+ unsigned char niSyncTbl[MAX_SCSI_TAR / 2]; /* Sync/Wide byte
+ of targets */
+ unsigned char niScamTbl[MAX_SCSI_TAR][4]; /* Compressed Scam name
+ string of Targets */
+};
+
+#define MODEL_LT 1
+#define MODEL_DL 2
+#define MODEL_LW 3
+#define MODEL_DW 4
+
+struct sccb_card {
+ struct sccb *currentSCCB;
+ struct sccb_mgr_info *cardInfo;
+
+ u32 ioPort;
+
+ unsigned short cmdCounter;
+ unsigned char discQCount;
+ unsigned char tagQ_Lst;
+ unsigned char cardIndex;
+ unsigned char scanIndex;
+ unsigned char globalFlags;
+ unsigned char ourId;
+ struct nvram_info *pNvRamInfo;
+ struct sccb *discQ_Tbl[QUEUE_DEPTH];
+
+};
+
+#define F_TAG_STARTED 0x01
+#define F_CONLUN_IO 0x02
+#define F_DO_RENEGO 0x04
+#define F_NO_FILTER 0x08
+#define F_GREEN_PC 0x10
+#define F_HOST_XFER_ACT 0x20
+#define F_NEW_SCCB_CMD 0x40
+#define F_UPDATE_EEPROM 0x80
+
+#define ID_STRING_LENGTH 32
+#define TYPE_CODE0 0x63 /*Level2 Mstr (bits 7-6), */
+
+#define SLV_TYPE_CODE0 0xA3 /*Priority Bit set (bits 7-6), */
+
+#define ASSIGN_ID 0x00
+#define SET_P_FLAG 0x01
+#define CFG_CMPLT 0x03
+#define DOM_MSTR 0x0F
+#define SYNC_PTRN 0x1F
+
+#define ID_0_7 0x18
+#define ID_8_F 0x11
+#define MISC_CODE 0x14
+#define CLR_P_FLAG 0x18
+
+#define INIT_SELTD 0x01
+#define LEVEL2_TAR 0x02
+
+enum scam_id_st { ID0, ID1, ID2, ID3, ID4, ID5, ID6, ID7, ID8, ID9, ID10, ID11,
+ ID12,
+ ID13, ID14, ID15, ID_UNUSED, ID_UNASSIGNED, ID_ASSIGNED, LEGACY,
+ CLR_PRIORITY, NO_ID_AVAIL
+};
+
+typedef struct SCCBscam_info {
+
+ unsigned char id_string[ID_STRING_LENGTH];
+ enum scam_id_st state;
+
+} SCCBSCAM_INFO;
+
+
+#define SMIDENT 0x80
+#define DISC_PRIV 0x40
+
+#define SM8BIT 0x00
+#define SM16BIT 0x01
+
+#define SIX_BYTE_CMD 0x06
+#define TWELVE_BYTE_CMD 0x0C
+
+#define ASYNC 0x00
+#define MAX_OFFSET 0x0F /* Maxbyteoffset for Sync Xfers */
+
+#define EEPROM_WD_CNT 256
+
+#define EEPROM_CHECK_SUM 0
+#define FW_SIGNATURE 2
+#define MODEL_NUMB_0 4
+#define MODEL_NUMB_2 6
+#define MODEL_NUMB_4 8
+#define SYSTEM_CONFIG 16
+#define SCSI_CONFIG 17
+#define BIOS_CONFIG 18
+#define SCAM_CONFIG 20
+#define ADAPTER_SCSI_ID 24
+
+#define IGNORE_B_SCAN 32
+#define SEND_START_ENA 34
+#define DEVICE_ENABLE 36
+
+#define SYNC_RATE_TBL 38
+#define SYNC_RATE_TBL01 38
+#define SYNC_RATE_TBL23 40
+#define SYNC_RATE_TBL45 42
+#define SYNC_RATE_TBL67 44
+#define SYNC_RATE_TBL89 46
+#define SYNC_RATE_TBLab 48
+#define SYNC_RATE_TBLcd 50
+#define SYNC_RATE_TBLef 52
+
+#define EE_SCAMBASE 256
+
+#define SCAM_ENABLED BIT(2)
+#define SCAM_LEVEL2 BIT(3)
+
+#define RENEGO_ENA BIT(10)
+#define CONNIO_ENA BIT(11)
+#define GREEN_PC_ENA BIT(12)
+
+#define AUTO_RATE_00 00
+#define AUTO_RATE_05 01
+#define AUTO_RATE_10 02
+#define AUTO_RATE_20 03
+
+#define WIDE_NEGO_BIT BIT(7)
+#define DISC_ENABLE_BIT BIT(6)
+
+#define hp_vendor_id_0 0x00 /* LSB */
+#define ORION_VEND_0 0x4B
+
+#define hp_vendor_id_1 0x01 /* MSB */
+#define ORION_VEND_1 0x10
+
+#define hp_device_id_0 0x02 /* LSB */
+#define ORION_DEV_0 0x30
+
+#define hp_device_id_1 0x03 /* MSB */
+#define ORION_DEV_1 0x81
+
+ /* Sub Vendor ID and Sub Device ID only available in
+ Harpoon Version 2 and higher */
+
+#define hp_sub_device_id_0 0x06 /* LSB */
+
+#define hp_semaphore 0x0C
+#define SCCB_MGR_ACTIVE BIT(0)
+#define TICKLE_ME BIT(1)
+#define SCCB_MGR_PRESENT BIT(3)
+#define BIOS_IN_USE BIT(4)
+
+#define hp_sys_ctrl 0x0F
+
+#define STOP_CLK BIT(0) /*Turn off BusMaster Clock */
+#define DRVR_RST BIT(1) /*Firmware Reset to 80C15 chip */
+#define HALT_MACH BIT(3) /*Halt State Machine */
+#define HARD_ABORT BIT(4) /*Hard Abort */
+
+#define hp_host_blk_cnt 0x13
+
+#define XFER_BLK64 0x06 /* 1 1 0 64 byte per block */
+
+#define BM_THRESHOLD 0x40 /* PCI mode can only xfer 16 bytes */
+
+#define hp_int_mask 0x17
+
+#define INT_CMD_COMPL BIT(0) /* DMA command complete */
+#define INT_EXT_STATUS BIT(1) /* Extended Status Set */
+
+#define hp_xfer_cnt_lo 0x18
+#define hp_xfer_cnt_hi 0x1A
+#define hp_xfer_cmd 0x1B
+
+#define XFER_HOST_DMA 0x00 /* 0 0 0 Transfer Host -> DMA */
+#define XFER_DMA_HOST 0x01 /* 0 0 1 Transfer DMA -> Host */
+
+#define XFER_HOST_AUTO 0x00 /* 0 0 Auto Transfer Size */
+
+#define XFER_DMA_8BIT 0x20 /* 0 1 8 BIT Transfer Size */
+
+#define DISABLE_INT BIT(7) /*Do not interrupt at end of cmd. */
+
+#define HOST_WRT_CMD ((DISABLE_INT + XFER_HOST_DMA + XFER_HOST_AUTO + XFER_DMA_8BIT))
+#define HOST_RD_CMD ((DISABLE_INT + XFER_DMA_HOST + XFER_HOST_AUTO + XFER_DMA_8BIT))
+
+#define hp_host_addr_lo 0x1C
+#define hp_host_addr_hmi 0x1E
+
+#define hp_ee_ctrl 0x22
+
+#define EXT_ARB_ACK BIT(7)
+#define SCSI_TERM_ENA_H BIT(6) /* SCSI high byte terminator */
+#define SEE_MS BIT(5)
+#define SEE_CS BIT(3)
+#define SEE_CLK BIT(2)
+#define SEE_DO BIT(1)
+#define SEE_DI BIT(0)
+
+#define EE_READ 0x06
+#define EE_WRITE 0x05
+#define EWEN 0x04
+#define EWEN_ADDR 0x03C0
+#define EWDS 0x04
+#define EWDS_ADDR 0x0000
+
+#define hp_bm_ctrl 0x26
+
+#define SCSI_TERM_ENA_L BIT(0) /*Enable/Disable external terminators */
+#define FLUSH_XFER_CNTR BIT(1) /*Flush transfer counter */
+#define FORCE1_XFER BIT(5) /*Always xfer one byte in byte mode */
+#define FAST_SINGLE BIT(6) /*?? */
+
+#define BMCTRL_DEFAULT (FORCE1_XFER|FAST_SINGLE|SCSI_TERM_ENA_L)
+
+#define hp_sg_addr 0x28
+#define hp_page_ctrl 0x29
+
+#define SCATTER_EN BIT(0)
+#define SGRAM_ARAM BIT(1)
+#define G_INT_DISABLE BIT(3) /* Enable/Disable all Interrupts */
+#define NARROW_SCSI_CARD BIT(4) /* NARROW/WIDE SCSI config pin */
+
+#define hp_pci_stat_cfg 0x2D
+
+#define REC_MASTER_ABORT BIT(5) /*received Master abort */
+
+#define hp_rev_num 0x33
+
+#define hp_stack_data 0x34
+#define hp_stack_addr 0x35
+
+#define hp_ext_status 0x36
+
+#define BM_FORCE_OFF BIT(0) /*Bus Master is forced to get off */
+#define PCI_TGT_ABORT BIT(0) /*PCI bus master transaction aborted */
+#define PCI_DEV_TMOUT BIT(1) /*PCI Device Time out */
+#define CMD_ABORTED BIT(4) /*Command aborted */
+#define BM_PARITY_ERR BIT(5) /*parity error on data received */
+#define PIO_OVERRUN BIT(6) /*Slave data overrun */
+#define BM_CMD_BUSY BIT(7) /*Bus master transfer command busy */
+#define BAD_EXT_STATUS (BM_FORCE_OFF | PCI_DEV_TMOUT | CMD_ABORTED | \
+ BM_PARITY_ERR | PIO_OVERRUN)
+
+#define hp_int_status 0x37
+
+#define EXT_STATUS_ON BIT(1) /*Extended status is valid */
+#define SCSI_INTERRUPT BIT(2) /*Global indication of a SCSI int. */
+#define INT_ASSERTED BIT(5) /* */
+
+#define hp_fifo_cnt 0x38
+
+#define hp_intena 0x40
+
+#define RESET BIT(7)
+#define PROG_HLT BIT(6)
+#define PARITY BIT(5)
+#define FIFO BIT(4)
+#define SEL BIT(3)
+#define SCAM_SEL BIT(2)
+#define RSEL BIT(1)
+#define TIMEOUT BIT(0)
+#define BUS_FREE BIT(15)
+#define XFER_CNT_0 BIT(14)
+#define PHASE BIT(13)
+#define IUNKWN BIT(12)
+#define ICMD_COMP BIT(11)
+#define ITICKLE BIT(10)
+#define IDO_STRT BIT(9)
+#define ITAR_DISC BIT(8)
+#define AUTO_INT (BIT(12)+BIT(11)+BIT(10)+BIT(9)+BIT(8))
+#define CLR_ALL_INT 0xFFFF
+#define CLR_ALL_INT_1 0xFF00
+
+#define hp_intstat 0x42
+
+#define hp_scsisig 0x44
+
+#define SCSI_SEL BIT(7)
+#define SCSI_BSY BIT(6)
+#define SCSI_REQ BIT(5)
+#define SCSI_ACK BIT(4)
+#define SCSI_ATN BIT(3)
+#define SCSI_CD BIT(2)
+#define SCSI_MSG BIT(1)
+#define SCSI_IOBIT BIT(0)
+
+#define S_SCSI_PHZ (BIT(2)+BIT(1)+BIT(0))
+#define S_MSGO_PH (BIT(2)+BIT(1) )
+#define S_MSGI_PH (BIT(2)+BIT(1)+BIT(0))
+#define S_DATAI_PH ( BIT(0))
+#define S_DATAO_PH 0x00
+#define S_ILL_PH ( BIT(1) )
+
+#define hp_scsictrl_0 0x45
+
+#define SEL_TAR BIT(6)
+#define ENA_ATN BIT(4)
+#define ENA_RESEL BIT(2)
+#define SCSI_RST BIT(1)
+#define ENA_SCAM_SEL BIT(0)
+
+#define hp_portctrl_0 0x46
+
+#define SCSI_PORT BIT(7)
+#define SCSI_INBIT BIT(6)
+#define DMA_PORT BIT(5)
+#define DMA_RD BIT(4)
+#define HOST_PORT BIT(3)
+#define HOST_WRT BIT(2)
+#define SCSI_BUS_EN BIT(1)
+#define START_TO BIT(0)
+
+#define hp_scsireset 0x47
+
+#define SCSI_INI BIT(6)
+#define SCAM_EN BIT(5)
+#define DMA_RESET BIT(3)
+#define HPSCSI_RESET BIT(2)
+#define PROG_RESET BIT(1)
+#define FIFO_CLR BIT(0)
+
+#define hp_xfercnt_0 0x48
+#define hp_xfercnt_2 0x4A
+
+#define hp_fifodata_0 0x4C
+#define hp_addstat 0x4E
+
+#define SCAM_TIMER BIT(7)
+#define SCSI_MODE8 BIT(3)
+#define SCSI_PAR_ERR BIT(0)
+
+#define hp_prgmcnt_0 0x4F
+
+#define hp_selfid_0 0x50
+#define hp_selfid_1 0x51
+#define hp_arb_id 0x52
+
+#define hp_select_id 0x53
+
+#define hp_synctarg_base 0x54
+#define hp_synctarg_12 0x54
+#define hp_synctarg_13 0x55
+#define hp_synctarg_14 0x56
+#define hp_synctarg_15 0x57
+
+#define hp_synctarg_8 0x58
+#define hp_synctarg_9 0x59
+#define hp_synctarg_10 0x5A
+#define hp_synctarg_11 0x5B
+
+#define hp_synctarg_4 0x5C
+#define hp_synctarg_5 0x5D
+#define hp_synctarg_6 0x5E
+#define hp_synctarg_7 0x5F
+
+#define hp_synctarg_0 0x60
+#define hp_synctarg_1 0x61
+#define hp_synctarg_2 0x62
+#define hp_synctarg_3 0x63
+
+#define NARROW_SCSI BIT(4)
+#define DEFAULT_OFFSET 0x0F
+
+#define hp_autostart_0 0x64
+#define hp_autostart_1 0x65
+#define hp_autostart_3 0x67
+
+#define AUTO_IMMED BIT(5)
+#define SELECT BIT(6)
+#define END_DATA (BIT(7)+BIT(6))
+
+#define hp_gp_reg_0 0x68
+#define hp_gp_reg_1 0x69
+#define hp_gp_reg_3 0x6B
+
+#define hp_seltimeout 0x6C
+
+#define TO_4ms 0x67 /* 3.9959ms */
+
+#define TO_5ms 0x03 /* 4.9152ms */
+#define TO_10ms 0x07 /* 11.xxxms */
+#define TO_250ms 0x99 /* 250.68ms */
+#define TO_290ms 0xB1 /* 289.99ms */
+
+#define hp_clkctrl_0 0x6D
+
+#define PWR_DWN BIT(6)
+#define ACTdeassert BIT(4)
+#define CLK_40MHZ (BIT(1) + BIT(0))
+
+#define CLKCTRL_DEFAULT (ACTdeassert | CLK_40MHZ)
+
+#define hp_fiforead 0x6E
+#define hp_fifowrite 0x6F
+
+#define hp_offsetctr 0x70
+#define hp_xferstat 0x71
+
+#define FIFO_EMPTY BIT(6)
+
+#define hp_portctrl_1 0x72
+
+#define CHK_SCSI_P BIT(3)
+#define HOST_MODE8 BIT(0)
+
+#define hp_xfer_pad 0x73
+
+#define ID_UNLOCK BIT(3)
+
+#define hp_scsidata_0 0x74
+#define hp_scsidata_1 0x75
+
+#define hp_aramBase 0x80
+#define BIOS_DATA_OFFSET 0x60
+#define BIOS_RELATIVE_CARD 0x64
+
+#define AR3 (BIT(9) + BIT(8))
+#define SDATA BIT(10)
+
+#define CRD_OP BIT(11) /* Cmp Reg. w/ Data */
+
+#define CRR_OP BIT(12) /* Cmp Reg. w. Reg. */
+
+#define CPE_OP (BIT(14)+BIT(11)) /* Cmp SCSI phs & Branch EQ */
+
+#define CPN_OP (BIT(14)+BIT(12)) /* Cmp SCSI phs & Branch NOT EQ */
+
+#define ADATA_OUT 0x00
+#define ADATA_IN BIT(8)
+#define ACOMMAND BIT(10)
+#define ASTATUS (BIT(10)+BIT(8))
+#define AMSG_OUT (BIT(10)+BIT(9))
+#define AMSG_IN (BIT(10)+BIT(9)+BIT(8))
+
+#define BRH_OP BIT(13) /* Branch */
+
+#define ALWAYS 0x00
+#define EQUAL BIT(8)
+#define NOT_EQ BIT(9)
+
+#define TCB_OP (BIT(13)+BIT(11)) /* Test condition & branch */
+
+#define FIFO_0 BIT(10)
+
+#define MPM_OP BIT(15) /* Match phase and move data */
+
+#define MRR_OP BIT(14) /* Move DReg. to Reg. */
+
+#define S_IDREG (BIT(2)+BIT(1)+BIT(0))
+
+#define D_AR0 0x00
+#define D_AR1 BIT(0)
+#define D_BUCKET (BIT(2) + BIT(1) + BIT(0))
+
+#define RAT_OP (BIT(14)+BIT(13)+BIT(11))
+
+#define SSI_OP (BIT(15)+BIT(11))
+
+#define SSI_ITAR_DISC (ITAR_DISC >> 8)
+#define SSI_IDO_STRT (IDO_STRT >> 8)
+
+#define SSI_ICMD_COMP (ICMD_COMP >> 8)
+#define SSI_ITICKLE (ITICKLE >> 8)
+
+#define SSI_IUNKWN (IUNKWN >> 8)
+#define SSI_INO_CC (IUNKWN >> 8)
+#define SSI_IRFAIL (IUNKWN >> 8)
+
+#define NP 0x10 /*Next Phase */
+#define NTCMD 0x02 /*Non- Tagged Command start */
+#define CMDPZ 0x04 /*Command phase */
+#define DINT 0x12 /*Data Out/In interrupt */
+#define DI 0x13 /*Data Out */
+#define DC 0x19 /*Disconnect Message */
+#define ST 0x1D /*Status Phase */
+#define UNKNWN 0x24 /*Unknown bus action */
+#define CC 0x25 /*Command Completion failure */
+#define TICK 0x26 /*New target reselected us. */
+#define SELCHK 0x28 /*Select & Check SCSI ID latch reg */
+
+#define ID_MSG_STRT hp_aramBase + 0x00
+#define NON_TAG_ID_MSG hp_aramBase + 0x06
+#define CMD_STRT hp_aramBase + 0x08
+#define SYNC_MSGS hp_aramBase + 0x08
+
+#define TAG_STRT 0x00
+#define DISCONNECT_START 0x10/2
+#define END_DATA_START 0x14/2
+#define CMD_ONLY_STRT CMDPZ/2
+#define SELCHK_STRT SELCHK/2
+
+#define GET_XFER_CNT(port, xfercnt) {RD_HARP32(port,hp_xfercnt_0,xfercnt); xfercnt &= 0xFFFFFF;}
+/* #define GET_XFER_CNT(port, xfercnt) (xfercnt = RD_HARPOON(port+hp_xfercnt_2), \
+ xfercnt <<= 16,\
+ xfercnt |= RDW_HARPOON((unsigned short)(port+hp_xfercnt_0)))
+ */
+#define HP_SETUP_ADDR_CNT(port,addr,count) (WRW_HARPOON((port+hp_host_addr_lo), (unsigned short)(addr & 0x0000FFFFL)),\
+ addr >>= 16,\
+ WRW_HARPOON((port+hp_host_addr_hmi), (unsigned short)(addr & 0x0000FFFFL)),\
+ WR_HARP32(port,hp_xfercnt_0,count),\
+ WRW_HARPOON((port+hp_xfer_cnt_lo), (unsigned short)(count & 0x0000FFFFL)),\
+ count >>= 16,\
+ WR_HARPOON(port+hp_xfer_cnt_hi, (count & 0xFF)))
+
+#define ACCEPT_MSG(port) {while(RD_HARPOON(port+hp_scsisig) & SCSI_REQ){}\
+ WR_HARPOON(port+hp_scsisig, S_ILL_PH);}
+
+#define ACCEPT_MSG_ATN(port) {while(RD_HARPOON(port+hp_scsisig) & SCSI_REQ){}\
+ WR_HARPOON(port+hp_scsisig, (S_ILL_PH|SCSI_ATN));}
+
+#define DISABLE_AUTO(port) (WR_HARPOON(port+hp_scsireset, PROG_RESET),\
+ WR_HARPOON(port+hp_scsireset, 0x00))
+
+#define ARAM_ACCESS(p_port) (WR_HARPOON(p_port+hp_page_ctrl, \
+ (RD_HARPOON(p_port+hp_page_ctrl) | SGRAM_ARAM)))
+
+#define SGRAM_ACCESS(p_port) (WR_HARPOON(p_port+hp_page_ctrl, \
+ (RD_HARPOON(p_port+hp_page_ctrl) & ~SGRAM_ARAM)))
+
+#define MDISABLE_INT(p_port) (WR_HARPOON(p_port+hp_page_ctrl, \
+ (RD_HARPOON(p_port+hp_page_ctrl) | G_INT_DISABLE)))
+
+#define MENABLE_INT(p_port) (WR_HARPOON(p_port+hp_page_ctrl, \
+ (RD_HARPOON(p_port+hp_page_ctrl) & ~G_INT_DISABLE)))
+
+static unsigned char FPT_sisyncn(u32 port, unsigned char p_card,
+ unsigned char syncFlag);
+static void FPT_ssel(u32 port, unsigned char p_card);
+static void FPT_sres(u32 port, unsigned char p_card,
+ struct sccb_card *pCurrCard);
+static void FPT_shandem(u32 port, unsigned char p_card,
+ struct sccb *pCurrSCCB);
+static void FPT_stsyncn(u32 port, unsigned char p_card);
+static void FPT_sisyncr(u32 port, unsigned char sync_pulse,
+ unsigned char offset);
+static void FPT_sssyncv(u32 p_port, unsigned char p_id,
+ unsigned char p_sync_value,
+ struct sccb_mgr_tar_info *currTar_Info);
+static void FPT_sresb(u32 port, unsigned char p_card);
+static void FPT_sxfrp(u32 p_port, unsigned char p_card);
+static void FPT_schkdd(u32 port, unsigned char p_card);
+static unsigned char FPT_RdStack(u32 port, unsigned char index);
+static void FPT_WrStack(u32 portBase, unsigned char index,
+ unsigned char data);
+static unsigned char FPT_ChkIfChipInitialized(u32 ioPort);
+
+static void FPT_SendMsg(u32 port, unsigned char message);
+static void FPT_queueFlushTargSccb(unsigned char p_card, unsigned char thisTarg,
+ unsigned char error_code);
+
+static void FPT_sinits(struct sccb *p_sccb, unsigned char p_card);
+static void FPT_RNVRamData(struct nvram_info *pNvRamInfo);
+
+static unsigned char FPT_siwidn(u32 port, unsigned char p_card);
+static void FPT_stwidn(u32 port, unsigned char p_card);
+static void FPT_siwidr(u32 port, unsigned char width);
+
+static void FPT_queueSelectFail(struct sccb_card *pCurrCard,
+ unsigned char p_card);
+static void FPT_queueDisconnect(struct sccb *p_SCCB, unsigned char p_card);
+static void FPT_queueCmdComplete(struct sccb_card *pCurrCard,
+ struct sccb *p_SCCB, unsigned char p_card);
+static void FPT_queueSearchSelect(struct sccb_card *pCurrCard,
+ unsigned char p_card);
+static void FPT_queueFlushSccb(unsigned char p_card, unsigned char error_code);
+static void FPT_queueAddSccb(struct sccb *p_SCCB, unsigned char card);
+static unsigned char FPT_queueFindSccb(struct sccb *p_SCCB,
+ unsigned char p_card);
+static void FPT_utilUpdateResidual(struct sccb *p_SCCB);
+static unsigned short FPT_CalcCrc16(unsigned char buffer[]);
+static unsigned char FPT_CalcLrc(unsigned char buffer[]);
+
+static void FPT_Wait1Second(u32 p_port);
+static void FPT_Wait(u32 p_port, unsigned char p_delay);
+static void FPT_utilEEWriteOnOff(u32 p_port, unsigned char p_mode);
+static void FPT_utilEEWrite(u32 p_port, unsigned short ee_data,
+ unsigned short ee_addr);
+static unsigned short FPT_utilEERead(u32 p_port,
+ unsigned short ee_addr);
+static unsigned short FPT_utilEEReadOrg(u32 p_port,
+ unsigned short ee_addr);
+static void FPT_utilEESendCmdAddr(u32 p_port, unsigned char ee_cmd,
+ unsigned short ee_addr);
+
+static void FPT_phaseDataOut(u32 port, unsigned char p_card);
+static void FPT_phaseDataIn(u32 port, unsigned char p_card);
+static void FPT_phaseCommand(u32 port, unsigned char p_card);
+static void FPT_phaseStatus(u32 port, unsigned char p_card);
+static void FPT_phaseMsgOut(u32 port, unsigned char p_card);
+static void FPT_phaseMsgIn(u32 port, unsigned char p_card);
+static void FPT_phaseIllegal(u32 port, unsigned char p_card);
+
+static void FPT_phaseDecode(u32 port, unsigned char p_card);
+static void FPT_phaseChkFifo(u32 port, unsigned char p_card);
+static void FPT_phaseBusFree(u32 p_port, unsigned char p_card);
+
+static void FPT_XbowInit(u32 port, unsigned char scamFlg);
+static void FPT_BusMasterInit(u32 p_port);
+static void FPT_DiagEEPROM(u32 p_port);
+
+static void FPT_dataXferProcessor(u32 port,
+ struct sccb_card *pCurrCard);
+static void FPT_busMstrSGDataXferStart(u32 port,
+ struct sccb *pCurrSCCB);
+static void FPT_busMstrDataXferStart(u32 port,
+ struct sccb *pCurrSCCB);
+static void FPT_hostDataXferAbort(u32 port, unsigned char p_card,
+ struct sccb *pCurrSCCB);
+static void FPT_hostDataXferRestart(struct sccb *currSCCB);
+
+static unsigned char FPT_SccbMgr_bad_isr(u32 p_port,
+ unsigned char p_card,
+ struct sccb_card *pCurrCard,
+ unsigned short p_int);
+
+static void FPT_SccbMgrTableInitAll(void);
+static void FPT_SccbMgrTableInitCard(struct sccb_card *pCurrCard,
+ unsigned char p_card);
+static void FPT_SccbMgrTableInitTarget(unsigned char p_card,
+ unsigned char target);
+
+static void FPT_scini(unsigned char p_card, unsigned char p_our_id,
+ unsigned char p_power_up);
+
+static int FPT_scarb(u32 p_port, unsigned char p_sel_type);
+static void FPT_scbusf(u32 p_port);
+static void FPT_scsel(u32 p_port);
+static void FPT_scasid(unsigned char p_card, u32 p_port);
+static unsigned char FPT_scxferc(u32 p_port, unsigned char p_data);
+static unsigned char FPT_scsendi(u32 p_port,
+ unsigned char p_id_string[]);
+static unsigned char FPT_sciso(u32 p_port,
+ unsigned char p_id_string[]);
+static void FPT_scwirod(u32 p_port, unsigned char p_data_bit);
+static void FPT_scwiros(u32 p_port, unsigned char p_data_bit);
+static unsigned char FPT_scvalq(unsigned char p_quintet);
+static unsigned char FPT_scsell(u32 p_port, unsigned char targ_id);
+static void FPT_scwtsel(u32 p_port);
+static void FPT_inisci(unsigned char p_card, u32 p_port,
+ unsigned char p_our_id);
+static void FPT_scsavdi(unsigned char p_card, u32 p_port);
+static unsigned char FPT_scmachid(unsigned char p_card,
+ unsigned char p_id_string[]);
+
+static void FPT_autoCmdCmplt(u32 p_port, unsigned char p_card);
+static void FPT_autoLoadDefaultMap(u32 p_port);
+
+static struct sccb_mgr_tar_info FPT_sccbMgrTbl[MAX_CARDS][MAX_SCSI_TAR] =
+ { {{0}} };
+static struct sccb_card FPT_BL_Card[MAX_CARDS] = { {0} };
+static SCCBSCAM_INFO FPT_scamInfo[MAX_SCSI_TAR] = { {{0}} };
+static struct nvram_info FPT_nvRamInfo[MAX_MB_CARDS] = { {0} };
+
+static unsigned char FPT_mbCards = 0;
+static unsigned char FPT_scamHAString[] =
+ { 0x63, 0x07, 'B', 'U', 'S', 'L', 'O', 'G', 'I', 'C',
+ ' ', 'B', 'T', '-', '9', '3', '0',
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20
+};
+
+static unsigned short FPT_default_intena = 0;
+
+static void (*FPT_s_PhaseTbl[8]) (u32, unsigned char) = {
+0};
+
+/*---------------------------------------------------------------------
+ *
+ * Function: FlashPoint_ProbeHostAdapter
+ *
+ * Description: Setup and/or Search for cards and return info to caller.
+ *
+ *---------------------------------------------------------------------*/
+
+static int FlashPoint_ProbeHostAdapter(struct sccb_mgr_info *pCardInfo)
+{
+ static unsigned char first_time = 1;
+
+ unsigned char i, j, id, ScamFlg;
+ unsigned short temp, temp2, temp3, temp4, temp5, temp6;
+ u32 ioport;
+ struct nvram_info *pCurrNvRam;
+
+ ioport = pCardInfo->si_baseaddr;
+
+ if (RD_HARPOON(ioport + hp_vendor_id_0) != ORION_VEND_0)
+ return (int)FAILURE;
+
+ if ((RD_HARPOON(ioport + hp_vendor_id_1) != ORION_VEND_1))
+ return (int)FAILURE;
+
+ if ((RD_HARPOON(ioport + hp_device_id_0) != ORION_DEV_0))
+ return (int)FAILURE;
+
+ if ((RD_HARPOON(ioport + hp_device_id_1) != ORION_DEV_1))
+ return (int)FAILURE;
+
+ if (RD_HARPOON(ioport + hp_rev_num) != 0x0f) {
+
+/* For new Harpoon then check for sub_device ID LSB
+ the bits(0-3) must be all ZERO for compatible with
+ current version of SCCBMgr, else skip this Harpoon
+ device. */
+
+ if (RD_HARPOON(ioport + hp_sub_device_id_0) & 0x0f)
+ return (int)FAILURE;
+ }
+
+ if (first_time) {
+ FPT_SccbMgrTableInitAll();
+ first_time = 0;
+ FPT_mbCards = 0;
+ }
+
+ if (FPT_RdStack(ioport, 0) != 0x00) {
+ if (FPT_ChkIfChipInitialized(ioport) == 0) {
+ pCurrNvRam = NULL;
+ WR_HARPOON(ioport + hp_semaphore, 0x00);
+ FPT_XbowInit(ioport, 0); /*Must Init the SCSI before attempting */
+ FPT_DiagEEPROM(ioport);
+ } else {
+ if (FPT_mbCards < MAX_MB_CARDS) {
+ pCurrNvRam = &FPT_nvRamInfo[FPT_mbCards];
+ FPT_mbCards++;
+ pCurrNvRam->niBaseAddr = ioport;
+ FPT_RNVRamData(pCurrNvRam);
+ } else
+ return (int)FAILURE;
+ }
+ } else
+ pCurrNvRam = NULL;
+
+ WR_HARPOON(ioport + hp_clkctrl_0, CLKCTRL_DEFAULT);
+ WR_HARPOON(ioport + hp_sys_ctrl, 0x00);
+
+ if (pCurrNvRam)
+ pCardInfo->si_id = pCurrNvRam->niAdapId;
+ else
+ pCardInfo->si_id =
+ (unsigned
+ char)(FPT_utilEERead(ioport,
+ (ADAPTER_SCSI_ID /
+ 2)) & (unsigned char)0x0FF);
+
+ pCardInfo->si_lun = 0x00;
+ pCardInfo->si_fw_revision = ORION_FW_REV;
+ temp2 = 0x0000;
+ temp3 = 0x0000;
+ temp4 = 0x0000;
+ temp5 = 0x0000;
+ temp6 = 0x0000;
+
+ for (id = 0; id < (16 / 2); id++) {
+
+ if (pCurrNvRam) {
+ temp = (unsigned short)pCurrNvRam->niSyncTbl[id];
+ temp = ((temp & 0x03) + ((temp << 4) & 0xc0)) +
+ (((temp << 4) & 0x0300) + ((temp << 8) & 0xc000));
+ } else
+ temp =
+ FPT_utilEERead(ioport,
+ (unsigned short)((SYNC_RATE_TBL / 2)
+ + id));
+
+ for (i = 0; i < 2; temp >>= 8, i++) {
+
+ temp2 >>= 1;
+ temp3 >>= 1;
+ temp4 >>= 1;
+ temp5 >>= 1;
+ temp6 >>= 1;
+ switch (temp & 0x3) {
+ case AUTO_RATE_20: /* Synchronous, 20 mega-transfers/second */
+ temp6 |= 0x8000;
+ fallthrough;
+ case AUTO_RATE_10: /* Synchronous, 10 mega-transfers/second */
+ temp5 |= 0x8000;
+ fallthrough;
+ case AUTO_RATE_05: /* Synchronous, 5 mega-transfers/second */
+ temp2 |= 0x8000;
+ fallthrough;
+ case AUTO_RATE_00: /* Asynchronous */
+ break;
+ }
+
+ if (temp & DISC_ENABLE_BIT)
+ temp3 |= 0x8000;
+
+ if (temp & WIDE_NEGO_BIT)
+ temp4 |= 0x8000;
+
+ }
+ }
+
+ pCardInfo->si_per_targ_init_sync = temp2;
+ pCardInfo->si_per_targ_no_disc = temp3;
+ pCardInfo->si_per_targ_wide_nego = temp4;
+ pCardInfo->si_per_targ_fast_nego = temp5;
+ pCardInfo->si_per_targ_ultra_nego = temp6;
+
+ if (pCurrNvRam)
+ i = pCurrNvRam->niSysConf;
+ else
+ i = (unsigned
+ char)(FPT_utilEERead(ioport, (SYSTEM_CONFIG / 2)));
+
+ if (pCurrNvRam)
+ ScamFlg = pCurrNvRam->niScamConf;
+ else
+ ScamFlg =
+ (unsigned char)FPT_utilEERead(ioport, SCAM_CONFIG / 2);
+
+ pCardInfo->si_mflags = 0x0000;
+
+ if (i & 0x01)
+ pCardInfo->si_mflags |= SCSI_PARITY_ENA;
+
+ if (!(i & 0x02))
+ pCardInfo->si_mflags |= SOFT_RESET;
+
+ if (i & 0x10)
+ pCardInfo->si_mflags |= EXTENDED_TRANSLATION;
+
+ if (ScamFlg & SCAM_ENABLED)
+ pCardInfo->si_mflags |= FLAG_SCAM_ENABLED;
+
+ if (ScamFlg & SCAM_LEVEL2)
+ pCardInfo->si_mflags |= FLAG_SCAM_LEVEL2;
+
+ j = (RD_HARPOON(ioport + hp_bm_ctrl) & ~SCSI_TERM_ENA_L);
+ if (i & 0x04) {
+ j |= SCSI_TERM_ENA_L;
+ }
+ WR_HARPOON(ioport + hp_bm_ctrl, j);
+
+ j = (RD_HARPOON(ioport + hp_ee_ctrl) & ~SCSI_TERM_ENA_H);
+ if (i & 0x08) {
+ j |= SCSI_TERM_ENA_H;
+ }
+ WR_HARPOON(ioport + hp_ee_ctrl, j);
+
+ if (!(RD_HARPOON(ioport + hp_page_ctrl) & NARROW_SCSI_CARD))
+
+ pCardInfo->si_mflags |= SUPPORT_16TAR_32LUN;
+
+ pCardInfo->si_card_family = HARPOON_FAMILY;
+ pCardInfo->si_bustype = BUSTYPE_PCI;
+
+ if (pCurrNvRam) {
+ pCardInfo->si_card_model[0] = '9';
+ switch (pCurrNvRam->niModel & 0x0f) {
+ case MODEL_LT:
+ pCardInfo->si_card_model[1] = '3';
+ pCardInfo->si_card_model[2] = '0';
+ break;
+ case MODEL_LW:
+ pCardInfo->si_card_model[1] = '5';
+ pCardInfo->si_card_model[2] = '0';
+ break;
+ case MODEL_DL:
+ pCardInfo->si_card_model[1] = '3';
+ pCardInfo->si_card_model[2] = '2';
+ break;
+ case MODEL_DW:
+ pCardInfo->si_card_model[1] = '5';
+ pCardInfo->si_card_model[2] = '2';
+ break;
+ }
+ } else {
+ temp = FPT_utilEERead(ioport, (MODEL_NUMB_0 / 2));
+ pCardInfo->si_card_model[0] = (unsigned char)(temp >> 8);
+ temp = FPT_utilEERead(ioport, (MODEL_NUMB_2 / 2));
+
+ pCardInfo->si_card_model[1] = (unsigned char)(temp & 0x00FF);
+ pCardInfo->si_card_model[2] = (unsigned char)(temp >> 8);
+ }
+
+ if (pCardInfo->si_card_model[1] == '3') {
+ if (RD_HARPOON(ioport + hp_ee_ctrl) & BIT(7))
+ pCardInfo->si_mflags |= LOW_BYTE_TERM;
+ } else if (pCardInfo->si_card_model[2] == '0') {
+ temp = RD_HARPOON(ioport + hp_xfer_pad);
+ WR_HARPOON(ioport + hp_xfer_pad, (temp & ~BIT(4)));
+ if (RD_HARPOON(ioport + hp_ee_ctrl) & BIT(7))
+ pCardInfo->si_mflags |= LOW_BYTE_TERM;
+ WR_HARPOON(ioport + hp_xfer_pad, (temp | BIT(4)));
+ if (RD_HARPOON(ioport + hp_ee_ctrl) & BIT(7))
+ pCardInfo->si_mflags |= HIGH_BYTE_TERM;
+ WR_HARPOON(ioport + hp_xfer_pad, temp);
+ } else {
+ temp = RD_HARPOON(ioport + hp_ee_ctrl);
+ temp2 = RD_HARPOON(ioport + hp_xfer_pad);
+ WR_HARPOON(ioport + hp_ee_ctrl, (temp | SEE_CS));
+ WR_HARPOON(ioport + hp_xfer_pad, (temp2 | BIT(4)));
+ temp3 = 0;
+ for (i = 0; i < 8; i++) {
+ temp3 <<= 1;
+ if (!(RD_HARPOON(ioport + hp_ee_ctrl) & BIT(7)))
+ temp3 |= 1;
+ WR_HARPOON(ioport + hp_xfer_pad, (temp2 & ~BIT(4)));
+ WR_HARPOON(ioport + hp_xfer_pad, (temp2 | BIT(4)));
+ }
+ WR_HARPOON(ioport + hp_ee_ctrl, temp);
+ WR_HARPOON(ioport + hp_xfer_pad, temp2);
+ if (!(temp3 & BIT(7)))
+ pCardInfo->si_mflags |= LOW_BYTE_TERM;
+ if (!(temp3 & BIT(6)))
+ pCardInfo->si_mflags |= HIGH_BYTE_TERM;
+ }
+
+ ARAM_ACCESS(ioport);
+
+ for (i = 0; i < 4; i++) {
+
+ pCardInfo->si_XlatInfo[i] =
+ RD_HARPOON(ioport + hp_aramBase + BIOS_DATA_OFFSET + i);
+ }
+
+ /* return with -1 if no sort, else return with
+ logical card number sorted by BIOS (zero-based) */
+
+ pCardInfo->si_relative_cardnum =
+ (unsigned
+ char)(RD_HARPOON(ioport + hp_aramBase + BIOS_RELATIVE_CARD) - 1);
+
+ SGRAM_ACCESS(ioport);
+
+ FPT_s_PhaseTbl[0] = FPT_phaseDataOut;
+ FPT_s_PhaseTbl[1] = FPT_phaseDataIn;
+ FPT_s_PhaseTbl[2] = FPT_phaseIllegal;
+ FPT_s_PhaseTbl[3] = FPT_phaseIllegal;
+ FPT_s_PhaseTbl[4] = FPT_phaseCommand;
+ FPT_s_PhaseTbl[5] = FPT_phaseStatus;
+ FPT_s_PhaseTbl[6] = FPT_phaseMsgOut;
+ FPT_s_PhaseTbl[7] = FPT_phaseMsgIn;
+
+ pCardInfo->si_present = 0x01;
+
+ return 0;
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: FlashPoint_HardwareResetHostAdapter
+ *
+ * Description: Setup adapter for normal operation (hard reset).
+ *
+ *---------------------------------------------------------------------*/
+
+static void *FlashPoint_HardwareResetHostAdapter(struct sccb_mgr_info
+ *pCardInfo)
+{
+ struct sccb_card *CurrCard = NULL;
+ struct nvram_info *pCurrNvRam;
+ unsigned char i, j, thisCard, ScamFlg;
+ unsigned short temp, sync_bit_map, id;
+ u32 ioport;
+
+ ioport = pCardInfo->si_baseaddr;
+
+ for (thisCard = 0; thisCard <= MAX_CARDS; thisCard++) {
+
+ if (thisCard == MAX_CARDS)
+ return (void *)FAILURE;
+
+ if (FPT_BL_Card[thisCard].ioPort == ioport) {
+
+ CurrCard = &FPT_BL_Card[thisCard];
+ FPT_SccbMgrTableInitCard(CurrCard, thisCard);
+ break;
+ }
+
+ else if (FPT_BL_Card[thisCard].ioPort == 0x00) {
+
+ FPT_BL_Card[thisCard].ioPort = ioport;
+ CurrCard = &FPT_BL_Card[thisCard];
+
+ if (FPT_mbCards)
+ for (i = 0; i < FPT_mbCards; i++) {
+ if (CurrCard->ioPort ==
+ FPT_nvRamInfo[i].niBaseAddr)
+ CurrCard->pNvRamInfo =
+ &FPT_nvRamInfo[i];
+ }
+ FPT_SccbMgrTableInitCard(CurrCard, thisCard);
+ CurrCard->cardIndex = thisCard;
+ CurrCard->cardInfo = pCardInfo;
+
+ break;
+ }
+ }
+
+ pCurrNvRam = CurrCard->pNvRamInfo;
+
+ if (pCurrNvRam) {
+ ScamFlg = pCurrNvRam->niScamConf;
+ } else {
+ ScamFlg =
+ (unsigned char)FPT_utilEERead(ioport, SCAM_CONFIG / 2);
+ }
+
+ FPT_BusMasterInit(ioport);
+ FPT_XbowInit(ioport, ScamFlg);
+
+ FPT_autoLoadDefaultMap(ioport);
+
+ for (i = 0, id = 0x01; i != pCardInfo->si_id; i++, id <<= 1) {
+ }
+
+ WR_HARPOON(ioport + hp_selfid_0, id);
+ WR_HARPOON(ioport + hp_selfid_1, 0x00);
+ WR_HARPOON(ioport + hp_arb_id, pCardInfo->si_id);
+ CurrCard->ourId = pCardInfo->si_id;
+
+ i = (unsigned char)pCardInfo->si_mflags;
+ if (i & SCSI_PARITY_ENA)
+ WR_HARPOON(ioport + hp_portctrl_1, (HOST_MODE8 | CHK_SCSI_P));
+
+ j = (RD_HARPOON(ioport + hp_bm_ctrl) & ~SCSI_TERM_ENA_L);
+ if (i & LOW_BYTE_TERM)
+ j |= SCSI_TERM_ENA_L;
+ WR_HARPOON(ioport + hp_bm_ctrl, j);
+
+ j = (RD_HARPOON(ioport + hp_ee_ctrl) & ~SCSI_TERM_ENA_H);
+ if (i & HIGH_BYTE_TERM)
+ j |= SCSI_TERM_ENA_H;
+ WR_HARPOON(ioport + hp_ee_ctrl, j);
+
+ if (!(pCardInfo->si_mflags & SOFT_RESET)) {
+
+ FPT_sresb(ioport, thisCard);
+
+ FPT_scini(thisCard, pCardInfo->si_id, 0);
+ }
+
+ if (pCardInfo->si_mflags & POST_ALL_UNDERRRUNS)
+ CurrCard->globalFlags |= F_NO_FILTER;
+
+ if (pCurrNvRam) {
+ if (pCurrNvRam->niSysConf & 0x10)
+ CurrCard->globalFlags |= F_GREEN_PC;
+ } else {
+ if (FPT_utilEERead(ioport, (SYSTEM_CONFIG / 2)) & GREEN_PC_ENA)
+ CurrCard->globalFlags |= F_GREEN_PC;
+ }
+
+ /* Set global flag to indicate Re-Negotiation to be done on all
+ ckeck condition */
+ if (pCurrNvRam) {
+ if (pCurrNvRam->niScsiConf & 0x04)
+ CurrCard->globalFlags |= F_DO_RENEGO;
+ } else {
+ if (FPT_utilEERead(ioport, (SCSI_CONFIG / 2)) & RENEGO_ENA)
+ CurrCard->globalFlags |= F_DO_RENEGO;
+ }
+
+ if (pCurrNvRam) {
+ if (pCurrNvRam->niScsiConf & 0x08)
+ CurrCard->globalFlags |= F_CONLUN_IO;
+ } else {
+ if (FPT_utilEERead(ioport, (SCSI_CONFIG / 2)) & CONNIO_ENA)
+ CurrCard->globalFlags |= F_CONLUN_IO;
+ }
+
+ temp = pCardInfo->si_per_targ_no_disc;
+
+ for (i = 0, id = 1; i < MAX_SCSI_TAR; i++, id <<= 1) {
+
+ if (temp & id)
+ FPT_sccbMgrTbl[thisCard][i].TarStatus |= TAR_ALLOW_DISC;
+ }
+
+ sync_bit_map = 0x0001;
+
+ for (id = 0; id < (MAX_SCSI_TAR / 2); id++) {
+
+ if (pCurrNvRam) {
+ temp = (unsigned short)pCurrNvRam->niSyncTbl[id];
+ temp = ((temp & 0x03) + ((temp << 4) & 0xc0)) +
+ (((temp << 4) & 0x0300) + ((temp << 8) & 0xc000));
+ } else
+ temp =
+ FPT_utilEERead(ioport,
+ (unsigned short)((SYNC_RATE_TBL / 2)
+ + id));
+
+ for (i = 0; i < 2; temp >>= 8, i++) {
+
+ if (pCardInfo->si_per_targ_init_sync & sync_bit_map) {
+
+ FPT_sccbMgrTbl[thisCard][id * 2 +
+ i].TarEEValue =
+ (unsigned char)temp;
+ }
+
+ else {
+ FPT_sccbMgrTbl[thisCard][id * 2 +
+ i].TarStatus |=
+ SYNC_SUPPORTED;
+ FPT_sccbMgrTbl[thisCard][id * 2 +
+ i].TarEEValue =
+ (unsigned char)(temp & ~EE_SYNC_MASK);
+ }
+
+/* if ((pCardInfo->si_per_targ_wide_nego & sync_bit_map) ||
+ (id*2+i >= 8)){
+*/
+ if (pCardInfo->si_per_targ_wide_nego & sync_bit_map) {
+
+ FPT_sccbMgrTbl[thisCard][id * 2 +
+ i].TarEEValue |=
+ EE_WIDE_SCSI;
+
+ }
+
+ else { /* NARROW SCSI */
+ FPT_sccbMgrTbl[thisCard][id * 2 +
+ i].TarStatus |=
+ WIDE_NEGOCIATED;
+ }
+
+ sync_bit_map <<= 1;
+
+ }
+ }
+
+ WR_HARPOON((ioport + hp_semaphore),
+ (unsigned char)(RD_HARPOON((ioport + hp_semaphore)) |
+ SCCB_MGR_PRESENT));
+
+ return (void *)CurrCard;
+}
+
+static void FlashPoint_ReleaseHostAdapter(void *pCurrCard)
+{
+ unsigned char i;
+ u32 portBase;
+ u32 regOffset;
+ u32 scamData;
+ u32 *pScamTbl;
+ struct nvram_info *pCurrNvRam;
+
+ pCurrNvRam = ((struct sccb_card *)pCurrCard)->pNvRamInfo;
+
+ if (pCurrNvRam) {
+ FPT_WrStack(pCurrNvRam->niBaseAddr, 0, pCurrNvRam->niModel);
+ FPT_WrStack(pCurrNvRam->niBaseAddr, 1, pCurrNvRam->niSysConf);
+ FPT_WrStack(pCurrNvRam->niBaseAddr, 2, pCurrNvRam->niScsiConf);
+ FPT_WrStack(pCurrNvRam->niBaseAddr, 3, pCurrNvRam->niScamConf);
+ FPT_WrStack(pCurrNvRam->niBaseAddr, 4, pCurrNvRam->niAdapId);
+
+ for (i = 0; i < MAX_SCSI_TAR / 2; i++)
+ FPT_WrStack(pCurrNvRam->niBaseAddr,
+ (unsigned char)(i + 5),
+ pCurrNvRam->niSyncTbl[i]);
+
+ portBase = pCurrNvRam->niBaseAddr;
+
+ for (i = 0; i < MAX_SCSI_TAR; i++) {
+ regOffset = hp_aramBase + 64 + i * 4;
+ pScamTbl = (u32 *)&pCurrNvRam->niScamTbl[i];
+ scamData = *pScamTbl;
+ WR_HARP32(portBase, regOffset, scamData);
+ }
+
+ } else {
+ FPT_WrStack(((struct sccb_card *)pCurrCard)->ioPort, 0, 0);
+ }
+}
+
+static void FPT_RNVRamData(struct nvram_info *pNvRamInfo)
+{
+ unsigned char i;
+ u32 portBase;
+ u32 regOffset;
+ u32 scamData;
+ u32 *pScamTbl;
+
+ pNvRamInfo->niModel = FPT_RdStack(pNvRamInfo->niBaseAddr, 0);
+ pNvRamInfo->niSysConf = FPT_RdStack(pNvRamInfo->niBaseAddr, 1);
+ pNvRamInfo->niScsiConf = FPT_RdStack(pNvRamInfo->niBaseAddr, 2);
+ pNvRamInfo->niScamConf = FPT_RdStack(pNvRamInfo->niBaseAddr, 3);
+ pNvRamInfo->niAdapId = FPT_RdStack(pNvRamInfo->niBaseAddr, 4);
+
+ for (i = 0; i < MAX_SCSI_TAR / 2; i++)
+ pNvRamInfo->niSyncTbl[i] =
+ FPT_RdStack(pNvRamInfo->niBaseAddr, (unsigned char)(i + 5));
+
+ portBase = pNvRamInfo->niBaseAddr;
+
+ for (i = 0; i < MAX_SCSI_TAR; i++) {
+ regOffset = hp_aramBase + 64 + i * 4;
+ RD_HARP32(portBase, regOffset, scamData);
+ pScamTbl = (u32 *)&pNvRamInfo->niScamTbl[i];
+ *pScamTbl = scamData;
+ }
+
+}
+
+static unsigned char FPT_RdStack(u32 portBase, unsigned char index)
+{
+ WR_HARPOON(portBase + hp_stack_addr, index);
+ return RD_HARPOON(portBase + hp_stack_data);
+}
+
+static void FPT_WrStack(u32 portBase, unsigned char index, unsigned char data)
+{
+ WR_HARPOON(portBase + hp_stack_addr, index);
+ WR_HARPOON(portBase + hp_stack_data, data);
+}
+
+static unsigned char FPT_ChkIfChipInitialized(u32 ioPort)
+{
+ if ((RD_HARPOON(ioPort + hp_arb_id) & 0x0f) != FPT_RdStack(ioPort, 4))
+ return 0;
+ if ((RD_HARPOON(ioPort + hp_clkctrl_0) & CLKCTRL_DEFAULT)
+ != CLKCTRL_DEFAULT)
+ return 0;
+ if ((RD_HARPOON(ioPort + hp_seltimeout) == TO_250ms) ||
+ (RD_HARPOON(ioPort + hp_seltimeout) == TO_290ms))
+ return 1;
+ return 0;
+
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: FlashPoint_StartCCB
+ *
+ * Description: Start a command pointed to by p_Sccb. When the
+ * command is completed it will be returned via the
+ * callback function.
+ *
+ *---------------------------------------------------------------------*/
+static void FlashPoint_StartCCB(void *curr_card, struct sccb *p_Sccb)
+{
+ u32 ioport;
+ unsigned char thisCard, lun;
+ struct sccb *pSaveSccb;
+ CALL_BK_FN callback;
+ struct sccb_card *pCurrCard = curr_card;
+
+ thisCard = pCurrCard->cardIndex;
+ ioport = pCurrCard->ioPort;
+
+ if ((p_Sccb->TargID >= MAX_SCSI_TAR) || (p_Sccb->Lun >= MAX_LUN)) {
+
+ p_Sccb->HostStatus = SCCB_COMPLETE;
+ p_Sccb->SccbStatus = SCCB_ERROR;
+ callback = (CALL_BK_FN) p_Sccb->SccbCallback;
+ if (callback)
+ callback(p_Sccb);
+
+ return;
+ }
+
+ FPT_sinits(p_Sccb, thisCard);
+
+ if (!pCurrCard->cmdCounter) {
+ WR_HARPOON(ioport + hp_semaphore,
+ (RD_HARPOON(ioport + hp_semaphore)
+ | SCCB_MGR_ACTIVE));
+
+ if (pCurrCard->globalFlags & F_GREEN_PC) {
+ WR_HARPOON(ioport + hp_clkctrl_0, CLKCTRL_DEFAULT);
+ WR_HARPOON(ioport + hp_sys_ctrl, 0x00);
+ }
+ }
+
+ pCurrCard->cmdCounter++;
+
+ if (RD_HARPOON(ioport + hp_semaphore) & BIOS_IN_USE) {
+
+ WR_HARPOON(ioport + hp_semaphore,
+ (RD_HARPOON(ioport + hp_semaphore)
+ | TICKLE_ME));
+ if (p_Sccb->OperationCode == RESET_COMMAND) {
+ pSaveSccb =
+ pCurrCard->currentSCCB;
+ pCurrCard->currentSCCB = p_Sccb;
+ FPT_queueSelectFail(&FPT_BL_Card[thisCard], thisCard);
+ pCurrCard->currentSCCB =
+ pSaveSccb;
+ } else {
+ FPT_queueAddSccb(p_Sccb, thisCard);
+ }
+ }
+
+ else if ((RD_HARPOON(ioport + hp_page_ctrl) & G_INT_DISABLE)) {
+
+ if (p_Sccb->OperationCode == RESET_COMMAND) {
+ pSaveSccb =
+ pCurrCard->currentSCCB;
+ pCurrCard->currentSCCB = p_Sccb;
+ FPT_queueSelectFail(&FPT_BL_Card[thisCard], thisCard);
+ pCurrCard->currentSCCB =
+ pSaveSccb;
+ } else {
+ FPT_queueAddSccb(p_Sccb, thisCard);
+ }
+ }
+
+ else {
+
+ MDISABLE_INT(ioport);
+
+ if ((pCurrCard->globalFlags & F_CONLUN_IO) &&
+ ((FPT_sccbMgrTbl[thisCard][p_Sccb->TargID].
+ TarStatus & TAR_TAG_Q_MASK) != TAG_Q_TRYING))
+ lun = p_Sccb->Lun;
+ else
+ lun = 0;
+ if ((pCurrCard->currentSCCB == NULL) &&
+ (FPT_sccbMgrTbl[thisCard][p_Sccb->TargID].TarSelQ_Cnt == 0)
+ && (FPT_sccbMgrTbl[thisCard][p_Sccb->TargID].TarLUNBusy[lun]
+ == 0)) {
+
+ pCurrCard->currentSCCB = p_Sccb;
+ FPT_ssel(p_Sccb->SccbIOPort, thisCard);
+ }
+
+ else {
+
+ if (p_Sccb->OperationCode == RESET_COMMAND) {
+ pSaveSccb = pCurrCard->currentSCCB;
+ pCurrCard->currentSCCB = p_Sccb;
+ FPT_queueSelectFail(&FPT_BL_Card[thisCard],
+ thisCard);
+ pCurrCard->currentSCCB = pSaveSccb;
+ } else {
+ FPT_queueAddSccb(p_Sccb, thisCard);
+ }
+ }
+
+ MENABLE_INT(ioport);
+ }
+
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: FlashPoint_AbortCCB
+ *
+ * Description: Abort the command pointed to by p_Sccb. When the
+ * command is completed it will be returned via the
+ * callback function.
+ *
+ *---------------------------------------------------------------------*/
+static int FlashPoint_AbortCCB(void *pCurrCard, struct sccb *p_Sccb)
+{
+ u32 ioport;
+
+ unsigned char thisCard;
+ CALL_BK_FN callback;
+ struct sccb *pSaveSCCB;
+ struct sccb_mgr_tar_info *currTar_Info;
+
+ ioport = ((struct sccb_card *)pCurrCard)->ioPort;
+
+ thisCard = ((struct sccb_card *)pCurrCard)->cardIndex;
+
+ if (!(RD_HARPOON(ioport + hp_page_ctrl) & G_INT_DISABLE)) {
+
+ if (FPT_queueFindSccb(p_Sccb, thisCard)) {
+
+ ((struct sccb_card *)pCurrCard)->cmdCounter--;
+
+ if (!((struct sccb_card *)pCurrCard)->cmdCounter)
+ WR_HARPOON(ioport + hp_semaphore,
+ (RD_HARPOON(ioport + hp_semaphore)
+ & (unsigned
+ char)(~(SCCB_MGR_ACTIVE |
+ TICKLE_ME))));
+
+ p_Sccb->SccbStatus = SCCB_ABORT;
+ callback = p_Sccb->SccbCallback;
+ callback(p_Sccb);
+
+ return 0;
+ }
+
+ else {
+ if (((struct sccb_card *)pCurrCard)->currentSCCB ==
+ p_Sccb) {
+ p_Sccb->SccbStatus = SCCB_ABORT;
+ return 0;
+
+ }
+
+ else {
+ if (p_Sccb->Sccb_tag) {
+ MDISABLE_INT(ioport);
+ if (((struct sccb_card *)pCurrCard)->
+ discQ_Tbl[p_Sccb->Sccb_tag] ==
+ p_Sccb) {
+ p_Sccb->SccbStatus = SCCB_ABORT;
+ p_Sccb->Sccb_scsistat =
+ ABORT_ST;
+ p_Sccb->Sccb_scsimsg =
+ ABORT_TASK;
+
+ if (((struct sccb_card *)
+ pCurrCard)->currentSCCB ==
+ NULL) {
+ ((struct sccb_card *)
+ pCurrCard)->
+ currentSCCB = p_Sccb;
+ FPT_ssel(ioport,
+ thisCard);
+ } else {
+ pSaveSCCB =
+ ((struct sccb_card
+ *)pCurrCard)->
+ currentSCCB;
+ ((struct sccb_card *)
+ pCurrCard)->
+ currentSCCB = p_Sccb;
+ FPT_queueSelectFail((struct sccb_card *)pCurrCard, thisCard);
+ ((struct sccb_card *)
+ pCurrCard)->
+ currentSCCB = pSaveSCCB;
+ }
+ }
+ MENABLE_INT(ioport);
+ return 0;
+ } else {
+ currTar_Info =
+ &FPT_sccbMgrTbl[thisCard][p_Sccb->
+ TargID];
+
+ if (FPT_BL_Card[thisCard].
+ discQ_Tbl[currTar_Info->
+ LunDiscQ_Idx[p_Sccb->Lun]]
+ == p_Sccb) {
+ p_Sccb->SccbStatus = SCCB_ABORT;
+ return 0;
+ }
+ }
+ }
+ }
+ }
+ return -1;
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: FlashPoint_InterruptPending
+ *
+ * Description: Do a quick check to determine if there is a pending
+ * interrupt for this card and disable the IRQ Pin if so.
+ *
+ *---------------------------------------------------------------------*/
+static unsigned char FlashPoint_InterruptPending(void *pCurrCard)
+{
+ u32 ioport;
+
+ ioport = ((struct sccb_card *)pCurrCard)->ioPort;
+
+ if (RD_HARPOON(ioport + hp_int_status) & INT_ASSERTED) {
+ return 1;
+ }
+
+ else
+
+ return 0;
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: FlashPoint_HandleInterrupt
+ *
+ * Description: This is our entry point when an interrupt is generated
+ * by the card and the upper level driver passes it on to
+ * us.
+ *
+ *---------------------------------------------------------------------*/
+static int FlashPoint_HandleInterrupt(void *pcard)
+{
+ struct sccb *currSCCB;
+ unsigned char thisCard, result, bm_status;
+ unsigned short hp_int;
+ unsigned char i, target;
+ struct sccb_card *pCurrCard = pcard;
+ u32 ioport;
+
+ thisCard = pCurrCard->cardIndex;
+ ioport = pCurrCard->ioPort;
+
+ MDISABLE_INT(ioport);
+
+ if (RD_HARPOON(ioport + hp_int_status) & EXT_STATUS_ON)
+ bm_status = RD_HARPOON(ioport + hp_ext_status) &
+ (unsigned char)BAD_EXT_STATUS;
+ else
+ bm_status = 0;
+
+ WR_HARPOON(ioport + hp_int_mask, (INT_CMD_COMPL | SCSI_INTERRUPT));
+
+ while ((hp_int = RDW_HARPOON((ioport + hp_intstat)) &
+ FPT_default_intena) | bm_status) {
+
+ currSCCB = pCurrCard->currentSCCB;
+
+ if (hp_int & (FIFO | TIMEOUT | RESET | SCAM_SEL) || bm_status) {
+ result =
+ FPT_SccbMgr_bad_isr(ioport, thisCard, pCurrCard,
+ hp_int);
+ WRW_HARPOON((ioport + hp_intstat),
+ (FIFO | TIMEOUT | RESET | SCAM_SEL));
+ bm_status = 0;
+
+ if (result) {
+
+ MENABLE_INT(ioport);
+ return result;
+ }
+ }
+
+ else if (hp_int & ICMD_COMP) {
+
+ if (!(hp_int & BUS_FREE)) {
+ /* Wait for the BusFree before starting a new command. We
+ must also check for being reselected since the BusFree
+ may not show up if another device reselects us in 1.5us or
+ less. SRR Wednesday, 3/8/1995.
+ */
+ while (!
+ (RDW_HARPOON((ioport + hp_intstat)) &
+ (BUS_FREE | RSEL))) ;
+ }
+
+ if (pCurrCard->globalFlags & F_HOST_XFER_ACT)
+
+ FPT_phaseChkFifo(ioport, thisCard);
+
+/* WRW_HARPOON((ioport+hp_intstat),
+ (BUS_FREE | ICMD_COMP | ITAR_DISC | XFER_CNT_0));
+ */
+
+ WRW_HARPOON((ioport + hp_intstat), CLR_ALL_INT_1);
+
+ FPT_autoCmdCmplt(ioport, thisCard);
+
+ }
+
+ else if (hp_int & ITAR_DISC) {
+
+ if (pCurrCard->globalFlags & F_HOST_XFER_ACT)
+ FPT_phaseChkFifo(ioport, thisCard);
+
+ if (RD_HARPOON(ioport + hp_gp_reg_1) ==
+ SAVE_POINTERS) {
+
+ WR_HARPOON(ioport + hp_gp_reg_1, 0x00);
+ currSCCB->Sccb_XferState |= F_NO_DATA_YET;
+
+ currSCCB->Sccb_savedATC = currSCCB->Sccb_ATC;
+ }
+
+ currSCCB->Sccb_scsistat = DISCONNECT_ST;
+ FPT_queueDisconnect(currSCCB, thisCard);
+
+ /* Wait for the BusFree before starting a new command. We
+ must also check for being reselected since the BusFree
+ may not show up if another device reselects us in 1.5us or
+ less. SRR Wednesday, 3/8/1995.
+ */
+ while (!
+ (RDW_HARPOON((ioport + hp_intstat)) &
+ (BUS_FREE | RSEL))
+ && !((RDW_HARPOON((ioport + hp_intstat)) & PHASE)
+ && RD_HARPOON((ioport + hp_scsisig)) ==
+ (SCSI_BSY | SCSI_REQ | SCSI_CD | SCSI_MSG |
+ SCSI_IOBIT))) ;
+
+ /*
+ The additional loop exit condition above detects a timing problem
+ with the revision D/E harpoon chips. The caller should reset the
+ host adapter to recover when 0xFE is returned.
+ */
+ if (!
+ (RDW_HARPOON((ioport + hp_intstat)) &
+ (BUS_FREE | RSEL))) {
+ MENABLE_INT(ioport);
+ return 0xFE;
+ }
+
+ WRW_HARPOON((ioport + hp_intstat),
+ (BUS_FREE | ITAR_DISC));
+
+ pCurrCard->globalFlags |= F_NEW_SCCB_CMD;
+
+ }
+
+ else if (hp_int & RSEL) {
+
+ WRW_HARPOON((ioport + hp_intstat),
+ (PROG_HLT | RSEL | PHASE | BUS_FREE));
+
+ if (RDW_HARPOON((ioport + hp_intstat)) & ITAR_DISC) {
+ if (pCurrCard->globalFlags & F_HOST_XFER_ACT)
+ FPT_phaseChkFifo(ioport, thisCard);
+
+ if (RD_HARPOON(ioport + hp_gp_reg_1) ==
+ SAVE_POINTERS) {
+ WR_HARPOON(ioport + hp_gp_reg_1, 0x00);
+ currSCCB->Sccb_XferState |=
+ F_NO_DATA_YET;
+ currSCCB->Sccb_savedATC =
+ currSCCB->Sccb_ATC;
+ }
+
+ WRW_HARPOON((ioport + hp_intstat),
+ (BUS_FREE | ITAR_DISC));
+ currSCCB->Sccb_scsistat = DISCONNECT_ST;
+ FPT_queueDisconnect(currSCCB, thisCard);
+ }
+
+ FPT_sres(ioport, thisCard, pCurrCard);
+ FPT_phaseDecode(ioport, thisCard);
+
+ }
+
+ else if ((hp_int & IDO_STRT) && (!(hp_int & BUS_FREE))) {
+
+ WRW_HARPOON((ioport + hp_intstat),
+ (IDO_STRT | XFER_CNT_0));
+ FPT_phaseDecode(ioport, thisCard);
+
+ }
+
+ else if ((hp_int & IUNKWN) || (hp_int & PROG_HLT)) {
+ WRW_HARPOON((ioport + hp_intstat),
+ (PHASE | IUNKWN | PROG_HLT));
+ if ((RD_HARPOON(ioport + hp_prgmcnt_0) & (unsigned char)
+ 0x3f) < (unsigned char)SELCHK) {
+ FPT_phaseDecode(ioport, thisCard);
+ } else {
+ /* Harpoon problem some SCSI target device respond to selection
+ with short BUSY pulse (<400ns) this will make the Harpoon is not able
+ to latch the correct Target ID into reg. x53.
+ The work around require to correct this reg. But when write to this
+ reg. (0x53) also increment the FIFO write addr reg (0x6f), thus we
+ need to read this reg first then restore it later. After update to 0x53 */
+
+ i = (unsigned
+ char)(RD_HARPOON(ioport + hp_fifowrite));
+ target =
+ (unsigned
+ char)(RD_HARPOON(ioport + hp_gp_reg_3));
+ WR_HARPOON(ioport + hp_xfer_pad,
+ (unsigned char)ID_UNLOCK);
+ WR_HARPOON(ioport + hp_select_id,
+ (unsigned char)(target | target <<
+ 4));
+ WR_HARPOON(ioport + hp_xfer_pad,
+ (unsigned char)0x00);
+ WR_HARPOON(ioport + hp_fifowrite, i);
+ WR_HARPOON(ioport + hp_autostart_3,
+ (AUTO_IMMED + TAG_STRT));
+ }
+ }
+
+ else if (hp_int & XFER_CNT_0) {
+
+ WRW_HARPOON((ioport + hp_intstat), XFER_CNT_0);
+
+ FPT_schkdd(ioport, thisCard);
+
+ }
+
+ else if (hp_int & BUS_FREE) {
+
+ WRW_HARPOON((ioport + hp_intstat), BUS_FREE);
+
+ if (pCurrCard->globalFlags & F_HOST_XFER_ACT) {
+
+ FPT_hostDataXferAbort(ioport, thisCard,
+ currSCCB);
+ }
+
+ FPT_phaseBusFree(ioport, thisCard);
+ }
+
+ else if (hp_int & ITICKLE) {
+
+ WRW_HARPOON((ioport + hp_intstat), ITICKLE);
+ pCurrCard->globalFlags |= F_NEW_SCCB_CMD;
+ }
+
+ if (((struct sccb_card *)pCurrCard)->
+ globalFlags & F_NEW_SCCB_CMD) {
+
+ pCurrCard->globalFlags &= ~F_NEW_SCCB_CMD;
+
+ if (pCurrCard->currentSCCB == NULL)
+ FPT_queueSearchSelect(pCurrCard, thisCard);
+
+ if (pCurrCard->currentSCCB != NULL) {
+ pCurrCard->globalFlags &= ~F_NEW_SCCB_CMD;
+ FPT_ssel(ioport, thisCard);
+ }
+
+ break;
+
+ }
+
+ } /*end while */
+
+ MENABLE_INT(ioport);
+
+ return 0;
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: Sccb_bad_isr
+ *
+ * Description: Some type of interrupt has occurred which is slightly
+ * out of the ordinary. We will now decode it fully, in
+ * this routine. This is broken up in an attempt to save
+ * processing time.
+ *
+ *---------------------------------------------------------------------*/
+static unsigned char FPT_SccbMgr_bad_isr(u32 p_port, unsigned char p_card,
+ struct sccb_card *pCurrCard,
+ unsigned short p_int)
+{
+ unsigned char temp, ScamFlg;
+ struct sccb_mgr_tar_info *currTar_Info;
+ struct nvram_info *pCurrNvRam;
+
+ if (RD_HARPOON(p_port + hp_ext_status) &
+ (BM_FORCE_OFF | PCI_DEV_TMOUT | BM_PARITY_ERR | PIO_OVERRUN)) {
+
+ if (pCurrCard->globalFlags & F_HOST_XFER_ACT) {
+
+ FPT_hostDataXferAbort(p_port, p_card,
+ pCurrCard->currentSCCB);
+ }
+
+ if (RD_HARPOON(p_port + hp_pci_stat_cfg) & REC_MASTER_ABORT)
+ {
+ WR_HARPOON(p_port + hp_pci_stat_cfg,
+ (RD_HARPOON(p_port + hp_pci_stat_cfg) &
+ ~REC_MASTER_ABORT));
+
+ WR_HARPOON(p_port + hp_host_blk_cnt, 0x00);
+
+ }
+
+ if (pCurrCard->currentSCCB != NULL) {
+
+ if (!pCurrCard->currentSCCB->HostStatus)
+ pCurrCard->currentSCCB->HostStatus =
+ SCCB_BM_ERR;
+
+ FPT_sxfrp(p_port, p_card);
+
+ temp = (unsigned char)(RD_HARPOON(p_port + hp_ee_ctrl) &
+ (EXT_ARB_ACK | SCSI_TERM_ENA_H));
+ WR_HARPOON(p_port + hp_ee_ctrl,
+ ((unsigned char)temp | SEE_MS | SEE_CS));
+ WR_HARPOON(p_port + hp_ee_ctrl, temp);
+
+ if (!
+ (RDW_HARPOON((p_port + hp_intstat)) &
+ (BUS_FREE | RESET))) {
+ FPT_phaseDecode(p_port, p_card);
+ }
+ }
+ }
+
+ else if (p_int & RESET) {
+
+ WR_HARPOON(p_port + hp_clkctrl_0, CLKCTRL_DEFAULT);
+ WR_HARPOON(p_port + hp_sys_ctrl, 0x00);
+ if (pCurrCard->currentSCCB != NULL) {
+
+ if (pCurrCard->globalFlags & F_HOST_XFER_ACT)
+
+ FPT_hostDataXferAbort(p_port, p_card,
+ pCurrCard->currentSCCB);
+ }
+
+ DISABLE_AUTO(p_port);
+
+ FPT_sresb(p_port, p_card);
+
+ while (RD_HARPOON(p_port + hp_scsictrl_0) & SCSI_RST) {
+ }
+
+ pCurrNvRam = pCurrCard->pNvRamInfo;
+ if (pCurrNvRam) {
+ ScamFlg = pCurrNvRam->niScamConf;
+ } else {
+ ScamFlg =
+ (unsigned char)FPT_utilEERead(p_port,
+ SCAM_CONFIG / 2);
+ }
+
+ FPT_XbowInit(p_port, ScamFlg);
+
+ FPT_scini(p_card, pCurrCard->ourId, 0);
+
+ return 0xFF;
+ }
+
+ else if (p_int & FIFO) {
+
+ WRW_HARPOON((p_port + hp_intstat), FIFO);
+
+ if (pCurrCard->currentSCCB != NULL)
+ FPT_sxfrp(p_port, p_card);
+ }
+
+ else if (p_int & TIMEOUT) {
+
+ DISABLE_AUTO(p_port);
+
+ WRW_HARPOON((p_port + hp_intstat),
+ (PROG_HLT | TIMEOUT | SEL | BUS_FREE | PHASE |
+ IUNKWN));
+
+ pCurrCard->currentSCCB->HostStatus = SCCB_SELECTION_TIMEOUT;
+
+ currTar_Info =
+ &FPT_sccbMgrTbl[p_card][pCurrCard->currentSCCB->TargID];
+ if ((pCurrCard->globalFlags & F_CONLUN_IO)
+ && ((currTar_Info->TarStatus & TAR_TAG_Q_MASK) !=
+ TAG_Q_TRYING))
+ currTar_Info->TarLUNBusy[pCurrCard->currentSCCB->Lun] =
+ 0;
+ else
+ currTar_Info->TarLUNBusy[0] = 0;
+
+ if (currTar_Info->TarEEValue & EE_SYNC_MASK) {
+ currTar_Info->TarSyncCtrl = 0;
+ currTar_Info->TarStatus &= ~TAR_SYNC_MASK;
+ }
+
+ if (currTar_Info->TarEEValue & EE_WIDE_SCSI) {
+ currTar_Info->TarStatus &= ~TAR_WIDE_MASK;
+ }
+
+ FPT_sssyncv(p_port, pCurrCard->currentSCCB->TargID, NARROW_SCSI,
+ currTar_Info);
+
+ FPT_queueCmdComplete(pCurrCard, pCurrCard->currentSCCB, p_card);
+
+ }
+
+ else if (p_int & SCAM_SEL) {
+
+ FPT_scarb(p_port, LEVEL2_TAR);
+ FPT_scsel(p_port);
+ FPT_scasid(p_card, p_port);
+
+ FPT_scbusf(p_port);
+
+ WRW_HARPOON((p_port + hp_intstat), SCAM_SEL);
+ }
+
+ return 0x00;
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: SccbMgrTableInit
+ *
+ * Description: Initialize all Sccb manager data structures.
+ *
+ *---------------------------------------------------------------------*/
+
+static void FPT_SccbMgrTableInitAll(void)
+{
+ unsigned char thisCard;
+
+ for (thisCard = 0; thisCard < MAX_CARDS; thisCard++) {
+ FPT_SccbMgrTableInitCard(&FPT_BL_Card[thisCard], thisCard);
+
+ FPT_BL_Card[thisCard].ioPort = 0x00;
+ FPT_BL_Card[thisCard].cardInfo = NULL;
+ FPT_BL_Card[thisCard].cardIndex = 0xFF;
+ FPT_BL_Card[thisCard].ourId = 0x00;
+ FPT_BL_Card[thisCard].pNvRamInfo = NULL;
+ }
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: SccbMgrTableInit
+ *
+ * Description: Initialize all Sccb manager data structures.
+ *
+ *---------------------------------------------------------------------*/
+
+static void FPT_SccbMgrTableInitCard(struct sccb_card *pCurrCard,
+ unsigned char p_card)
+{
+ unsigned char scsiID, qtag;
+
+ for (qtag = 0; qtag < QUEUE_DEPTH; qtag++) {
+ FPT_BL_Card[p_card].discQ_Tbl[qtag] = NULL;
+ }
+
+ for (scsiID = 0; scsiID < MAX_SCSI_TAR; scsiID++) {
+ FPT_sccbMgrTbl[p_card][scsiID].TarStatus = 0;
+ FPT_sccbMgrTbl[p_card][scsiID].TarEEValue = 0;
+ FPT_SccbMgrTableInitTarget(p_card, scsiID);
+ }
+
+ pCurrCard->scanIndex = 0x00;
+ pCurrCard->currentSCCB = NULL;
+ pCurrCard->globalFlags = 0x00;
+ pCurrCard->cmdCounter = 0x00;
+ pCurrCard->tagQ_Lst = 0x01;
+ pCurrCard->discQCount = 0;
+
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: SccbMgrTableInit
+ *
+ * Description: Initialize all Sccb manager data structures.
+ *
+ *---------------------------------------------------------------------*/
+
+static void FPT_SccbMgrTableInitTarget(unsigned char p_card,
+ unsigned char target)
+{
+
+ unsigned char lun, qtag;
+ struct sccb_mgr_tar_info *currTar_Info;
+
+ currTar_Info = &FPT_sccbMgrTbl[p_card][target];
+
+ currTar_Info->TarSelQ_Cnt = 0;
+ currTar_Info->TarSyncCtrl = 0;
+
+ currTar_Info->TarSelQ_Head = NULL;
+ currTar_Info->TarSelQ_Tail = NULL;
+ currTar_Info->TarTagQ_Cnt = 0;
+ currTar_Info->TarLUN_CA = 0;
+
+ for (lun = 0; lun < MAX_LUN; lun++) {
+ currTar_Info->TarLUNBusy[lun] = 0;
+ currTar_Info->LunDiscQ_Idx[lun] = 0;
+ }
+
+ for (qtag = 0; qtag < QUEUE_DEPTH; qtag++) {
+ if (FPT_BL_Card[p_card].discQ_Tbl[qtag] != NULL) {
+ if (FPT_BL_Card[p_card].discQ_Tbl[qtag]->TargID ==
+ target) {
+ FPT_BL_Card[p_card].discQ_Tbl[qtag] = NULL;
+ FPT_BL_Card[p_card].discQCount--;
+ }
+ }
+ }
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: sfetm
+ *
+ * Description: Read in a message byte from the SCSI bus, and check
+ * for a parity error.
+ *
+ *---------------------------------------------------------------------*/
+
+static unsigned char FPT_sfm(u32 port, struct sccb *pCurrSCCB)
+{
+ unsigned char message;
+ unsigned short TimeOutLoop;
+
+ TimeOutLoop = 0;
+ while ((!(RD_HARPOON(port + hp_scsisig) & SCSI_REQ)) &&
+ (TimeOutLoop++ < 20000)) {
+ }
+
+ WR_HARPOON(port + hp_portctrl_0, SCSI_PORT);
+
+ message = RD_HARPOON(port + hp_scsidata_0);
+
+ WR_HARPOON(port + hp_scsisig, SCSI_ACK + S_MSGI_PH);
+
+ if (TimeOutLoop > 20000)
+ message = 0x00; /* force message byte = 0 if Time Out on Req */
+
+ if ((RDW_HARPOON((port + hp_intstat)) & PARITY) &&
+ (RD_HARPOON(port + hp_addstat) & SCSI_PAR_ERR)) {
+ WR_HARPOON(port + hp_scsisig, (SCSI_ACK + S_ILL_PH));
+ WR_HARPOON(port + hp_xferstat, 0);
+ WR_HARPOON(port + hp_fiforead, 0);
+ WR_HARPOON(port + hp_fifowrite, 0);
+ if (pCurrSCCB != NULL) {
+ pCurrSCCB->Sccb_scsimsg = MSG_PARITY_ERROR;
+ }
+ message = 0x00;
+ do {
+ ACCEPT_MSG_ATN(port);
+ TimeOutLoop = 0;
+ while ((!(RD_HARPOON(port + hp_scsisig) & SCSI_REQ)) &&
+ (TimeOutLoop++ < 20000)) {
+ }
+ if (TimeOutLoop > 20000) {
+ WRW_HARPOON((port + hp_intstat), PARITY);
+ return message;
+ }
+ if ((RD_HARPOON(port + hp_scsisig) & S_SCSI_PHZ) !=
+ S_MSGI_PH) {
+ WRW_HARPOON((port + hp_intstat), PARITY);
+ return message;
+ }
+ WR_HARPOON(port + hp_portctrl_0, SCSI_PORT);
+
+ RD_HARPOON(port + hp_scsidata_0);
+
+ WR_HARPOON(port + hp_scsisig, (SCSI_ACK + S_ILL_PH));
+
+ } while (1);
+
+ }
+ WR_HARPOON(port + hp_scsisig, (SCSI_ACK + S_ILL_PH));
+ WR_HARPOON(port + hp_xferstat, 0);
+ WR_HARPOON(port + hp_fiforead, 0);
+ WR_HARPOON(port + hp_fifowrite, 0);
+ return message;
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: FPT_ssel
+ *
+ * Description: Load up automation and select target device.
+ *
+ *---------------------------------------------------------------------*/
+
+static void FPT_ssel(u32 port, unsigned char p_card)
+{
+
+ unsigned char auto_loaded, i, target, *theCCB;
+
+ u32 cdb_reg;
+ struct sccb_card *CurrCard;
+ struct sccb *currSCCB;
+ struct sccb_mgr_tar_info *currTar_Info;
+ unsigned char lastTag, lun;
+
+ CurrCard = &FPT_BL_Card[p_card];
+ currSCCB = CurrCard->currentSCCB;
+ target = currSCCB->TargID;
+ currTar_Info = &FPT_sccbMgrTbl[p_card][target];
+ lastTag = CurrCard->tagQ_Lst;
+
+ ARAM_ACCESS(port);
+
+ if ((currTar_Info->TarStatus & TAR_TAG_Q_MASK) == TAG_Q_REJECT)
+ currSCCB->ControlByte &= ~F_USE_CMD_Q;
+
+ if (((CurrCard->globalFlags & F_CONLUN_IO) &&
+ ((currTar_Info->TarStatus & TAR_TAG_Q_MASK) != TAG_Q_TRYING)))
+
+ lun = currSCCB->Lun;
+ else
+ lun = 0;
+
+ if (CurrCard->globalFlags & F_TAG_STARTED) {
+ if (!(currSCCB->ControlByte & F_USE_CMD_Q)) {
+ if ((currTar_Info->TarLUN_CA == 0)
+ && ((currTar_Info->TarStatus & TAR_TAG_Q_MASK)
+ == TAG_Q_TRYING)) {
+
+ if (currTar_Info->TarTagQ_Cnt != 0) {
+ currTar_Info->TarLUNBusy[lun] = 1;
+ FPT_queueSelectFail(CurrCard, p_card);
+ SGRAM_ACCESS(port);
+ return;
+ }
+
+ else {
+ currTar_Info->TarLUNBusy[lun] = 1;
+ }
+
+ }
+ /*End non-tagged */
+ else {
+ currTar_Info->TarLUNBusy[lun] = 1;
+ }
+
+ }
+ /*!Use cmd Q Tagged */
+ else {
+ if (currTar_Info->TarLUN_CA == 1) {
+ FPT_queueSelectFail(CurrCard, p_card);
+ SGRAM_ACCESS(port);
+ return;
+ }
+
+ currTar_Info->TarLUNBusy[lun] = 1;
+
+ } /*else use cmd Q tagged */
+
+ }
+ /*if glob tagged started */
+ else {
+ currTar_Info->TarLUNBusy[lun] = 1;
+ }
+
+ if ((((CurrCard->globalFlags & F_CONLUN_IO) &&
+ ((currTar_Info->TarStatus & TAR_TAG_Q_MASK) != TAG_Q_TRYING))
+ || (!(currSCCB->ControlByte & F_USE_CMD_Q)))) {
+ if (CurrCard->discQCount >= QUEUE_DEPTH) {
+ currTar_Info->TarLUNBusy[lun] = 1;
+ FPT_queueSelectFail(CurrCard, p_card);
+ SGRAM_ACCESS(port);
+ return;
+ }
+ for (i = 1; i < QUEUE_DEPTH; i++) {
+ if (++lastTag >= QUEUE_DEPTH)
+ lastTag = 1;
+ if (CurrCard->discQ_Tbl[lastTag] == NULL) {
+ CurrCard->tagQ_Lst = lastTag;
+ currTar_Info->LunDiscQ_Idx[lun] = lastTag;
+ CurrCard->discQ_Tbl[lastTag] = currSCCB;
+ CurrCard->discQCount++;
+ break;
+ }
+ }
+ if (i == QUEUE_DEPTH) {
+ currTar_Info->TarLUNBusy[lun] = 1;
+ FPT_queueSelectFail(CurrCard, p_card);
+ SGRAM_ACCESS(port);
+ return;
+ }
+ }
+
+ auto_loaded = 0;
+
+ WR_HARPOON(port + hp_select_id, target);
+ WR_HARPOON(port + hp_gp_reg_3, target); /* Use by new automation logic */
+
+ if (currSCCB->OperationCode == RESET_COMMAND) {
+ WRW_HARPOON((port + ID_MSG_STRT), (MPM_OP + AMSG_OUT +
+ (currSCCB->
+ Sccb_idmsg & ~DISC_PRIV)));
+
+ WRW_HARPOON((port + ID_MSG_STRT + 2), BRH_OP + ALWAYS + NP);
+
+ currSCCB->Sccb_scsimsg = TARGET_RESET;
+
+ WR_HARPOON(port + hp_autostart_3, (SELECT + SELCHK_STRT));
+ auto_loaded = 1;
+ currSCCB->Sccb_scsistat = SELECT_BDR_ST;
+
+ if (currTar_Info->TarEEValue & EE_SYNC_MASK) {
+ currTar_Info->TarSyncCtrl = 0;
+ currTar_Info->TarStatus &= ~TAR_SYNC_MASK;
+ }
+
+ if (currTar_Info->TarEEValue & EE_WIDE_SCSI) {
+ currTar_Info->TarStatus &= ~TAR_WIDE_MASK;
+ }
+
+ FPT_sssyncv(port, target, NARROW_SCSI, currTar_Info);
+ FPT_SccbMgrTableInitTarget(p_card, target);
+
+ }
+
+ else if (currSCCB->Sccb_scsistat == ABORT_ST) {
+ WRW_HARPOON((port + ID_MSG_STRT), (MPM_OP + AMSG_OUT +
+ (currSCCB->
+ Sccb_idmsg & ~DISC_PRIV)));
+
+ WRW_HARPOON((port + ID_MSG_STRT + 2), BRH_OP + ALWAYS + CMDPZ);
+
+ WRW_HARPOON((port + SYNC_MSGS + 0), (MPM_OP + AMSG_OUT +
+ (((unsigned
+ char)(currSCCB->
+ ControlByte &
+ TAG_TYPE_MASK)
+ >> 6) | (unsigned char)
+ 0x20)));
+ WRW_HARPOON((port + SYNC_MSGS + 2),
+ (MPM_OP + AMSG_OUT + currSCCB->Sccb_tag));
+ WRW_HARPOON((port + SYNC_MSGS + 4), (BRH_OP + ALWAYS + NP));
+
+ WR_HARPOON(port + hp_autostart_3, (SELECT + SELCHK_STRT));
+ auto_loaded = 1;
+
+ }
+
+ else if (!(currTar_Info->TarStatus & WIDE_NEGOCIATED)) {
+ auto_loaded = FPT_siwidn(port, p_card);
+ currSCCB->Sccb_scsistat = SELECT_WN_ST;
+ }
+
+ else if (!((currTar_Info->TarStatus & TAR_SYNC_MASK)
+ == SYNC_SUPPORTED)) {
+ auto_loaded = FPT_sisyncn(port, p_card, 0);
+ currSCCB->Sccb_scsistat = SELECT_SN_ST;
+ }
+
+ if (!auto_loaded) {
+
+ if (currSCCB->ControlByte & F_USE_CMD_Q) {
+
+ CurrCard->globalFlags |= F_TAG_STARTED;
+
+ if ((currTar_Info->TarStatus & TAR_TAG_Q_MASK)
+ == TAG_Q_REJECT) {
+ currSCCB->ControlByte &= ~F_USE_CMD_Q;
+
+ /* Fix up the start instruction with a jump to
+ Non-Tag-CMD handling */
+ WRW_HARPOON((port + ID_MSG_STRT),
+ BRH_OP + ALWAYS + NTCMD);
+
+ WRW_HARPOON((port + NON_TAG_ID_MSG),
+ (MPM_OP + AMSG_OUT +
+ currSCCB->Sccb_idmsg));
+
+ WR_HARPOON(port + hp_autostart_3,
+ (SELECT + SELCHK_STRT));
+
+ /* Setup our STATE so we know what happened when
+ the wheels fall off. */
+ currSCCB->Sccb_scsistat = SELECT_ST;
+
+ currTar_Info->TarLUNBusy[lun] = 1;
+ }
+
+ else {
+ WRW_HARPOON((port + ID_MSG_STRT),
+ (MPM_OP + AMSG_OUT +
+ currSCCB->Sccb_idmsg));
+
+ WRW_HARPOON((port + ID_MSG_STRT + 2),
+ (MPM_OP + AMSG_OUT +
+ (((unsigned char)(currSCCB->
+ ControlByte &
+ TAG_TYPE_MASK)
+ >> 6) | (unsigned char)0x20)));
+
+ for (i = 1; i < QUEUE_DEPTH; i++) {
+ if (++lastTag >= QUEUE_DEPTH)
+ lastTag = 1;
+ if (CurrCard->discQ_Tbl[lastTag] ==
+ NULL) {
+ WRW_HARPOON((port +
+ ID_MSG_STRT + 6),
+ (MPM_OP + AMSG_OUT +
+ lastTag));
+ CurrCard->tagQ_Lst = lastTag;
+ currSCCB->Sccb_tag = lastTag;
+ CurrCard->discQ_Tbl[lastTag] =
+ currSCCB;
+ CurrCard->discQCount++;
+ break;
+ }
+ }
+
+ if (i == QUEUE_DEPTH) {
+ currTar_Info->TarLUNBusy[lun] = 1;
+ FPT_queueSelectFail(CurrCard, p_card);
+ SGRAM_ACCESS(port);
+ return;
+ }
+
+ currSCCB->Sccb_scsistat = SELECT_Q_ST;
+
+ WR_HARPOON(port + hp_autostart_3,
+ (SELECT + SELCHK_STRT));
+ }
+ }
+
+ else {
+
+ WRW_HARPOON((port + ID_MSG_STRT),
+ BRH_OP + ALWAYS + NTCMD);
+
+ WRW_HARPOON((port + NON_TAG_ID_MSG),
+ (MPM_OP + AMSG_OUT + currSCCB->Sccb_idmsg));
+
+ currSCCB->Sccb_scsistat = SELECT_ST;
+
+ WR_HARPOON(port + hp_autostart_3,
+ (SELECT + SELCHK_STRT));
+ }
+
+ theCCB = (unsigned char *)&currSCCB->Cdb[0];
+
+ cdb_reg = port + CMD_STRT;
+
+ for (i = 0; i < currSCCB->CdbLength; i++) {
+ WRW_HARPOON(cdb_reg, (MPM_OP + ACOMMAND + *theCCB));
+ cdb_reg += 2;
+ theCCB++;
+ }
+
+ if (currSCCB->CdbLength != TWELVE_BYTE_CMD)
+ WRW_HARPOON(cdb_reg, (BRH_OP + ALWAYS + NP));
+
+ }
+ /* auto_loaded */
+ WRW_HARPOON((port + hp_fiforead), (unsigned short)0x00);
+ WR_HARPOON(port + hp_xferstat, 0x00);
+
+ WRW_HARPOON((port + hp_intstat), (PROG_HLT | TIMEOUT | SEL | BUS_FREE));
+
+ WR_HARPOON(port + hp_portctrl_0, (SCSI_PORT));
+
+ if (!(currSCCB->Sccb_MGRFlags & F_DEV_SELECTED)) {
+ WR_HARPOON(port + hp_scsictrl_0,
+ (SEL_TAR | ENA_ATN | ENA_RESEL | ENA_SCAM_SEL));
+ } else {
+
+/* auto_loaded = (RD_HARPOON(port+hp_autostart_3) & (unsigned char)0x1F);
+ auto_loaded |= AUTO_IMMED; */
+ auto_loaded = AUTO_IMMED;
+
+ DISABLE_AUTO(port);
+
+ WR_HARPOON(port + hp_autostart_3, auto_loaded);
+ }
+
+ SGRAM_ACCESS(port);
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: FPT_sres
+ *
+ * Description: Hookup the correct CCB and handle the incoming messages.
+ *
+ *---------------------------------------------------------------------*/
+
+static void FPT_sres(u32 port, unsigned char p_card,
+ struct sccb_card *pCurrCard)
+{
+
+ unsigned char our_target, message, lun = 0, tag, msgRetryCount;
+
+ struct sccb_mgr_tar_info *currTar_Info;
+ struct sccb *currSCCB;
+
+ if (pCurrCard->currentSCCB != NULL) {
+ currTar_Info =
+ &FPT_sccbMgrTbl[p_card][pCurrCard->currentSCCB->TargID];
+ DISABLE_AUTO(port);
+
+ WR_HARPOON((port + hp_scsictrl_0), (ENA_RESEL | ENA_SCAM_SEL));
+
+ currSCCB = pCurrCard->currentSCCB;
+ if (currSCCB->Sccb_scsistat == SELECT_WN_ST) {
+ currTar_Info->TarStatus &= ~TAR_WIDE_MASK;
+ currSCCB->Sccb_scsistat = BUS_FREE_ST;
+ }
+ if (currSCCB->Sccb_scsistat == SELECT_SN_ST) {
+ currTar_Info->TarStatus &= ~TAR_SYNC_MASK;
+ currSCCB->Sccb_scsistat = BUS_FREE_ST;
+ }
+ if (((pCurrCard->globalFlags & F_CONLUN_IO) &&
+ ((currTar_Info->TarStatus & TAR_TAG_Q_MASK) !=
+ TAG_Q_TRYING))) {
+ currTar_Info->TarLUNBusy[currSCCB->Lun] = 0;
+ if (currSCCB->Sccb_scsistat != ABORT_ST) {
+ pCurrCard->discQCount--;
+ pCurrCard->discQ_Tbl[currTar_Info->
+ LunDiscQ_Idx[currSCCB->
+ Lun]]
+ = NULL;
+ }
+ } else {
+ currTar_Info->TarLUNBusy[0] = 0;
+ if (currSCCB->Sccb_tag) {
+ if (currSCCB->Sccb_scsistat != ABORT_ST) {
+ pCurrCard->discQCount--;
+ pCurrCard->discQ_Tbl[currSCCB->
+ Sccb_tag] = NULL;
+ }
+ } else {
+ if (currSCCB->Sccb_scsistat != ABORT_ST) {
+ pCurrCard->discQCount--;
+ pCurrCard->discQ_Tbl[currTar_Info->
+ LunDiscQ_Idx[0]] =
+ NULL;
+ }
+ }
+ }
+
+ FPT_queueSelectFail(&FPT_BL_Card[p_card], p_card);
+ }
+
+ WRW_HARPOON((port + hp_fiforead), (unsigned short)0x00);
+
+ our_target = (unsigned char)(RD_HARPOON(port + hp_select_id) >> 4);
+ currTar_Info = &FPT_sccbMgrTbl[p_card][our_target];
+
+ msgRetryCount = 0;
+ do {
+
+ currTar_Info = &FPT_sccbMgrTbl[p_card][our_target];
+ tag = 0;
+
+ while (!(RD_HARPOON(port + hp_scsisig) & SCSI_REQ)) {
+ if (!(RD_HARPOON(port + hp_scsisig) & SCSI_BSY)) {
+
+ WRW_HARPOON((port + hp_intstat), PHASE);
+ return;
+ }
+ }
+
+ WRW_HARPOON((port + hp_intstat), PHASE);
+ if ((RD_HARPOON(port + hp_scsisig) & S_SCSI_PHZ) == S_MSGI_PH) {
+
+ message = FPT_sfm(port, pCurrCard->currentSCCB);
+ if (message) {
+
+ if (message <= (0x80 | LUN_MASK)) {
+ lun = message & (unsigned char)LUN_MASK;
+
+ if ((currTar_Info->
+ TarStatus & TAR_TAG_Q_MASK) ==
+ TAG_Q_TRYING) {
+ if (currTar_Info->TarTagQ_Cnt !=
+ 0) {
+
+ if (!
+ (currTar_Info->
+ TarLUN_CA)) {
+ ACCEPT_MSG(port); /*Release the ACK for ID msg. */
+
+ message =
+ FPT_sfm
+ (port,
+ pCurrCard->
+ currentSCCB);
+ if (message) {
+ ACCEPT_MSG
+ (port);
+ }
+
+ else
+ message
+ = 0;
+
+ if (message !=
+ 0) {
+ tag =
+ FPT_sfm
+ (port,
+ pCurrCard->
+ currentSCCB);
+
+ if (!
+ (tag))
+ message
+ =
+ 0;
+ }
+
+ }
+ /*C.A. exists! */
+ }
+ /*End Q cnt != 0 */
+ }
+ /*End Tag cmds supported! */
+ }
+ /*End valid ID message. */
+ else {
+
+ ACCEPT_MSG_ATN(port);
+ }
+
+ }
+ /* End good id message. */
+ else {
+
+ message = 0;
+ }
+ } else {
+ ACCEPT_MSG_ATN(port);
+
+ while (!
+ (RDW_HARPOON((port + hp_intstat)) &
+ (PHASE | RESET))
+ && !(RD_HARPOON(port + hp_scsisig) & SCSI_REQ)
+ && (RD_HARPOON(port + hp_scsisig) & SCSI_BSY)) ;
+
+ return;
+ }
+
+ if (message == 0) {
+ msgRetryCount++;
+ if (msgRetryCount == 1) {
+ FPT_SendMsg(port, MSG_PARITY_ERROR);
+ } else {
+ FPT_SendMsg(port, TARGET_RESET);
+
+ FPT_sssyncv(port, our_target, NARROW_SCSI,
+ currTar_Info);
+
+ if (FPT_sccbMgrTbl[p_card][our_target].
+ TarEEValue & EE_SYNC_MASK) {
+
+ FPT_sccbMgrTbl[p_card][our_target].
+ TarStatus &= ~TAR_SYNC_MASK;
+
+ }
+
+ if (FPT_sccbMgrTbl[p_card][our_target].
+ TarEEValue & EE_WIDE_SCSI) {
+
+ FPT_sccbMgrTbl[p_card][our_target].
+ TarStatus &= ~TAR_WIDE_MASK;
+ }
+
+ FPT_queueFlushTargSccb(p_card, our_target,
+ SCCB_COMPLETE);
+ FPT_SccbMgrTableInitTarget(p_card, our_target);
+ return;
+ }
+ }
+ } while (message == 0);
+
+ if (((pCurrCard->globalFlags & F_CONLUN_IO) &&
+ ((currTar_Info->TarStatus & TAR_TAG_Q_MASK) != TAG_Q_TRYING))) {
+ currTar_Info->TarLUNBusy[lun] = 1;
+ pCurrCard->currentSCCB =
+ pCurrCard->discQ_Tbl[currTar_Info->LunDiscQ_Idx[lun]];
+ if (pCurrCard->currentSCCB != NULL) {
+ ACCEPT_MSG(port);
+ } else {
+ ACCEPT_MSG_ATN(port);
+ }
+ } else {
+ currTar_Info->TarLUNBusy[0] = 1;
+
+ if (tag) {
+ if (pCurrCard->discQ_Tbl[tag] != NULL) {
+ pCurrCard->currentSCCB =
+ pCurrCard->discQ_Tbl[tag];
+ currTar_Info->TarTagQ_Cnt--;
+ ACCEPT_MSG(port);
+ } else {
+ ACCEPT_MSG_ATN(port);
+ }
+ } else {
+ pCurrCard->currentSCCB =
+ pCurrCard->discQ_Tbl[currTar_Info->LunDiscQ_Idx[0]];
+ if (pCurrCard->currentSCCB != NULL) {
+ ACCEPT_MSG(port);
+ } else {
+ ACCEPT_MSG_ATN(port);
+ }
+ }
+ }
+
+ if (pCurrCard->currentSCCB != NULL) {
+ if (pCurrCard->currentSCCB->Sccb_scsistat == ABORT_ST) {
+ /* During Abort Tag command, the target could have got re-selected
+ and completed the command. Check the select Q and remove the CCB
+ if it is in the Select Q */
+ FPT_queueFindSccb(pCurrCard->currentSCCB, p_card);
+ }
+ }
+
+ while (!(RDW_HARPOON((port + hp_intstat)) & (PHASE | RESET)) &&
+ !(RD_HARPOON(port + hp_scsisig) & SCSI_REQ) &&
+ (RD_HARPOON(port + hp_scsisig) & SCSI_BSY)) ;
+}
+
+static void FPT_SendMsg(u32 port, unsigned char message)
+{
+ while (!(RD_HARPOON(port + hp_scsisig) & SCSI_REQ)) {
+ if (!(RD_HARPOON(port + hp_scsisig) & SCSI_BSY)) {
+
+ WRW_HARPOON((port + hp_intstat), PHASE);
+ return;
+ }
+ }
+
+ WRW_HARPOON((port + hp_intstat), PHASE);
+ if ((RD_HARPOON(port + hp_scsisig) & S_SCSI_PHZ) == S_MSGO_PH) {
+ WRW_HARPOON((port + hp_intstat),
+ (BUS_FREE | PHASE | XFER_CNT_0));
+
+ WR_HARPOON(port + hp_portctrl_0, SCSI_BUS_EN);
+
+ WR_HARPOON(port + hp_scsidata_0, message);
+
+ WR_HARPOON(port + hp_scsisig, (SCSI_ACK + S_ILL_PH));
+
+ ACCEPT_MSG(port);
+
+ WR_HARPOON(port + hp_portctrl_0, 0x00);
+
+ if ((message == ABORT_TASK_SET) || (message == TARGET_RESET) ||
+ (message == ABORT_TASK)) {
+ while (!
+ (RDW_HARPOON((port + hp_intstat)) &
+ (BUS_FREE | PHASE))) {
+ }
+
+ if (RDW_HARPOON((port + hp_intstat)) & BUS_FREE) {
+ WRW_HARPOON((port + hp_intstat), BUS_FREE);
+ }
+ }
+ }
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: FPT_sdecm
+ *
+ * Description: Determine the proper response to the message from the
+ * target device.
+ *
+ *---------------------------------------------------------------------*/
+static void FPT_sdecm(unsigned char message, u32 port, unsigned char p_card)
+{
+ struct sccb *currSCCB;
+ struct sccb_card *CurrCard;
+ struct sccb_mgr_tar_info *currTar_Info;
+
+ CurrCard = &FPT_BL_Card[p_card];
+ currSCCB = CurrCard->currentSCCB;
+
+ currTar_Info = &FPT_sccbMgrTbl[p_card][currSCCB->TargID];
+
+ if (message == RESTORE_POINTERS) {
+ if (!(currSCCB->Sccb_XferState & F_NO_DATA_YET)) {
+ currSCCB->Sccb_ATC = currSCCB->Sccb_savedATC;
+
+ FPT_hostDataXferRestart(currSCCB);
+ }
+
+ ACCEPT_MSG(port);
+ WR_HARPOON(port + hp_autostart_1,
+ (AUTO_IMMED + DISCONNECT_START));
+ }
+
+ else if (message == COMMAND_COMPLETE) {
+
+ if (currSCCB->Sccb_scsistat == SELECT_Q_ST) {
+ currTar_Info->TarStatus &=
+ ~(unsigned char)TAR_TAG_Q_MASK;
+ currTar_Info->TarStatus |= (unsigned char)TAG_Q_REJECT;
+ }
+
+ ACCEPT_MSG(port);
+
+ }
+
+ else if ((message == NOP) || (message >= IDENTIFY_BASE) ||
+ (message == INITIATE_RECOVERY) ||
+ (message == RELEASE_RECOVERY)) {
+
+ ACCEPT_MSG(port);
+ WR_HARPOON(port + hp_autostart_1,
+ (AUTO_IMMED + DISCONNECT_START));
+ }
+
+ else if (message == MESSAGE_REJECT) {
+
+ if ((currSCCB->Sccb_scsistat == SELECT_SN_ST) ||
+ (currSCCB->Sccb_scsistat == SELECT_WN_ST) ||
+ ((currTar_Info->TarStatus & TAR_SYNC_MASK) == SYNC_TRYING)
+ || ((currTar_Info->TarStatus & TAR_TAG_Q_MASK) ==
+ TAG_Q_TRYING))
+ {
+ WRW_HARPOON((port + hp_intstat), BUS_FREE);
+
+ ACCEPT_MSG(port);
+
+ while ((!(RD_HARPOON(port + hp_scsisig) & SCSI_REQ)) &&
+ (!(RDW_HARPOON((port + hp_intstat)) & BUS_FREE)))
+ {
+ }
+
+ if (currSCCB->Lun == 0x00) {
+ if (currSCCB->Sccb_scsistat == SELECT_SN_ST) {
+
+ currTar_Info->TarStatus |=
+ (unsigned char)SYNC_SUPPORTED;
+
+ currTar_Info->TarEEValue &=
+ ~EE_SYNC_MASK;
+ }
+
+ else if (currSCCB->Sccb_scsistat ==
+ SELECT_WN_ST) {
+
+ currTar_Info->TarStatus =
+ (currTar_Info->
+ TarStatus & ~WIDE_ENABLED) |
+ WIDE_NEGOCIATED;
+
+ currTar_Info->TarEEValue &=
+ ~EE_WIDE_SCSI;
+
+ }
+
+ else if ((currTar_Info->
+ TarStatus & TAR_TAG_Q_MASK) ==
+ TAG_Q_TRYING) {
+ currTar_Info->TarStatus =
+ (currTar_Info->
+ TarStatus & ~(unsigned char)
+ TAR_TAG_Q_MASK) | TAG_Q_REJECT;
+
+ currSCCB->ControlByte &= ~F_USE_CMD_Q;
+ CurrCard->discQCount--;
+ CurrCard->discQ_Tbl[currSCCB->
+ Sccb_tag] = NULL;
+ currSCCB->Sccb_tag = 0x00;
+
+ }
+ }
+
+ if (RDW_HARPOON((port + hp_intstat)) & BUS_FREE) {
+
+ if (currSCCB->Lun == 0x00) {
+ WRW_HARPOON((port + hp_intstat),
+ BUS_FREE);
+ CurrCard->globalFlags |= F_NEW_SCCB_CMD;
+ }
+ }
+
+ else {
+
+ if ((CurrCard->globalFlags & F_CONLUN_IO) &&
+ ((currTar_Info->
+ TarStatus & TAR_TAG_Q_MASK) !=
+ TAG_Q_TRYING))
+ currTar_Info->TarLUNBusy[currSCCB->
+ Lun] = 1;
+ else
+ currTar_Info->TarLUNBusy[0] = 1;
+
+ currSCCB->ControlByte &=
+ ~(unsigned char)F_USE_CMD_Q;
+
+ WR_HARPOON(port + hp_autostart_1,
+ (AUTO_IMMED + DISCONNECT_START));
+
+ }
+ }
+
+ else {
+ ACCEPT_MSG(port);
+
+ while ((!(RD_HARPOON(port + hp_scsisig) & SCSI_REQ)) &&
+ (!(RDW_HARPOON((port + hp_intstat)) & BUS_FREE)))
+ {
+ }
+
+ if (!(RDW_HARPOON((port + hp_intstat)) & BUS_FREE)) {
+ WR_HARPOON(port + hp_autostart_1,
+ (AUTO_IMMED + DISCONNECT_START));
+ }
+ }
+ }
+
+ else if (message == EXTENDED_MESSAGE) {
+
+ ACCEPT_MSG(port);
+ FPT_shandem(port, p_card, currSCCB);
+ }
+
+ else if (message == IGNORE_WIDE_RESIDUE) {
+
+ ACCEPT_MSG(port); /* ACK the RESIDUE MSG */
+
+ message = FPT_sfm(port, currSCCB);
+
+ if (currSCCB->Sccb_scsimsg != MSG_PARITY_ERROR)
+ ACCEPT_MSG(port);
+ WR_HARPOON(port + hp_autostart_1,
+ (AUTO_IMMED + DISCONNECT_START));
+ }
+
+ else {
+
+ currSCCB->HostStatus = SCCB_PHASE_SEQUENCE_FAIL;
+ currSCCB->Sccb_scsimsg = MESSAGE_REJECT;
+
+ ACCEPT_MSG_ATN(port);
+ WR_HARPOON(port + hp_autostart_1,
+ (AUTO_IMMED + DISCONNECT_START));
+ }
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: FPT_shandem
+ *
+ * Description: Decide what to do with the extended message.
+ *
+ *---------------------------------------------------------------------*/
+static void FPT_shandem(u32 port, unsigned char p_card, struct sccb *pCurrSCCB)
+{
+ unsigned char length, message;
+
+ length = FPT_sfm(port, pCurrSCCB);
+ if (length) {
+
+ ACCEPT_MSG(port);
+ message = FPT_sfm(port, pCurrSCCB);
+ if (message) {
+
+ if (message == EXTENDED_SDTR) {
+
+ if (length == 0x03) {
+
+ ACCEPT_MSG(port);
+ FPT_stsyncn(port, p_card);
+ } else {
+
+ pCurrSCCB->Sccb_scsimsg = MESSAGE_REJECT;
+ ACCEPT_MSG_ATN(port);
+ }
+ } else if (message == EXTENDED_WDTR) {
+
+ if (length == 0x02) {
+
+ ACCEPT_MSG(port);
+ FPT_stwidn(port, p_card);
+ } else {
+
+ pCurrSCCB->Sccb_scsimsg = MESSAGE_REJECT;
+ ACCEPT_MSG_ATN(port);
+
+ WR_HARPOON(port + hp_autostart_1,
+ (AUTO_IMMED +
+ DISCONNECT_START));
+ }
+ } else {
+
+ pCurrSCCB->Sccb_scsimsg = MESSAGE_REJECT;
+ ACCEPT_MSG_ATN(port);
+
+ WR_HARPOON(port + hp_autostart_1,
+ (AUTO_IMMED + DISCONNECT_START));
+ }
+ } else {
+ if (pCurrSCCB->Sccb_scsimsg != MSG_PARITY_ERROR)
+ ACCEPT_MSG(port);
+ WR_HARPOON(port + hp_autostart_1,
+ (AUTO_IMMED + DISCONNECT_START));
+ }
+ } else {
+ if (pCurrSCCB->Sccb_scsimsg == MSG_PARITY_ERROR)
+ WR_HARPOON(port + hp_autostart_1,
+ (AUTO_IMMED + DISCONNECT_START));
+ }
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: FPT_sisyncn
+ *
+ * Description: Read in a message byte from the SCSI bus, and check
+ * for a parity error.
+ *
+ *---------------------------------------------------------------------*/
+
+static unsigned char FPT_sisyncn(u32 port, unsigned char p_card,
+ unsigned char syncFlag)
+{
+ struct sccb *currSCCB;
+ struct sccb_mgr_tar_info *currTar_Info;
+
+ currSCCB = FPT_BL_Card[p_card].currentSCCB;
+ currTar_Info = &FPT_sccbMgrTbl[p_card][currSCCB->TargID];
+
+ if (!((currTar_Info->TarStatus & TAR_SYNC_MASK) == SYNC_TRYING)) {
+
+ WRW_HARPOON((port + ID_MSG_STRT),
+ (MPM_OP + AMSG_OUT +
+ (currSCCB->
+ Sccb_idmsg & ~(unsigned char)DISC_PRIV)));
+
+ WRW_HARPOON((port + ID_MSG_STRT + 2), BRH_OP + ALWAYS + CMDPZ);
+
+ WRW_HARPOON((port + SYNC_MSGS + 0),
+ (MPM_OP + AMSG_OUT + EXTENDED_MESSAGE));
+ WRW_HARPOON((port + SYNC_MSGS + 2), (MPM_OP + AMSG_OUT + 0x03));
+ WRW_HARPOON((port + SYNC_MSGS + 4),
+ (MPM_OP + AMSG_OUT + EXTENDED_SDTR));
+
+ if ((currTar_Info->TarEEValue & EE_SYNC_MASK) == EE_SYNC_20MB)
+
+ WRW_HARPOON((port + SYNC_MSGS + 6),
+ (MPM_OP + AMSG_OUT + 12));
+
+ else if ((currTar_Info->TarEEValue & EE_SYNC_MASK) ==
+ EE_SYNC_10MB)
+
+ WRW_HARPOON((port + SYNC_MSGS + 6),
+ (MPM_OP + AMSG_OUT + 25));
+
+ else if ((currTar_Info->TarEEValue & EE_SYNC_MASK) ==
+ EE_SYNC_5MB)
+
+ WRW_HARPOON((port + SYNC_MSGS + 6),
+ (MPM_OP + AMSG_OUT + 50));
+
+ else
+ WRW_HARPOON((port + SYNC_MSGS + 6),
+ (MPM_OP + AMSG_OUT + 00));
+
+ WRW_HARPOON((port + SYNC_MSGS + 8), (RAT_OP));
+ WRW_HARPOON((port + SYNC_MSGS + 10),
+ (MPM_OP + AMSG_OUT + DEFAULT_OFFSET));
+ WRW_HARPOON((port + SYNC_MSGS + 12), (BRH_OP + ALWAYS + NP));
+
+ if (syncFlag == 0) {
+ WR_HARPOON(port + hp_autostart_3,
+ (SELECT + SELCHK_STRT));
+ currTar_Info->TarStatus =
+ ((currTar_Info->
+ TarStatus & ~(unsigned char)TAR_SYNC_MASK) |
+ (unsigned char)SYNC_TRYING);
+ } else {
+ WR_HARPOON(port + hp_autostart_3,
+ (AUTO_IMMED + CMD_ONLY_STRT));
+ }
+
+ return 1;
+ }
+
+ else {
+
+ currTar_Info->TarStatus |= (unsigned char)SYNC_SUPPORTED;
+ currTar_Info->TarEEValue &= ~EE_SYNC_MASK;
+ return 0;
+ }
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: FPT_stsyncn
+ *
+ * Description: The has sent us a Sync Nego message so handle it as
+ * necessary.
+ *
+ *---------------------------------------------------------------------*/
+static void FPT_stsyncn(u32 port, unsigned char p_card)
+{
+ unsigned char sync_msg, offset, sync_reg, our_sync_msg;
+ struct sccb *currSCCB;
+ struct sccb_mgr_tar_info *currTar_Info;
+
+ currSCCB = FPT_BL_Card[p_card].currentSCCB;
+ currTar_Info = &FPT_sccbMgrTbl[p_card][currSCCB->TargID];
+
+ sync_msg = FPT_sfm(port, currSCCB);
+
+ if ((sync_msg == 0x00) && (currSCCB->Sccb_scsimsg == MSG_PARITY_ERROR)) {
+ WR_HARPOON(port + hp_autostart_1,
+ (AUTO_IMMED + DISCONNECT_START));
+ return;
+ }
+
+ ACCEPT_MSG(port);
+
+ offset = FPT_sfm(port, currSCCB);
+
+ if ((offset == 0x00) && (currSCCB->Sccb_scsimsg == MSG_PARITY_ERROR)) {
+ WR_HARPOON(port + hp_autostart_1,
+ (AUTO_IMMED + DISCONNECT_START));
+ return;
+ }
+
+ if ((currTar_Info->TarEEValue & EE_SYNC_MASK) == EE_SYNC_20MB)
+
+ our_sync_msg = 12; /* Setup our Message to 20mb/s */
+
+ else if ((currTar_Info->TarEEValue & EE_SYNC_MASK) == EE_SYNC_10MB)
+
+ our_sync_msg = 25; /* Setup our Message to 10mb/s */
+
+ else if ((currTar_Info->TarEEValue & EE_SYNC_MASK) == EE_SYNC_5MB)
+
+ our_sync_msg = 50; /* Setup our Message to 5mb/s */
+ else
+
+ our_sync_msg = 0; /* Message = Async */
+
+ if (sync_msg < our_sync_msg) {
+ sync_msg = our_sync_msg; /*if faster, then set to max. */
+ }
+
+ if (offset == ASYNC)
+ sync_msg = ASYNC;
+
+ if (offset > MAX_OFFSET)
+ offset = MAX_OFFSET;
+
+ sync_reg = 0x00;
+
+ if (sync_msg > 12)
+
+ sync_reg = 0x20; /* Use 10MB/s */
+
+ if (sync_msg > 25)
+
+ sync_reg = 0x40; /* Use 6.6MB/s */
+
+ if (sync_msg > 38)
+
+ sync_reg = 0x60; /* Use 5MB/s */
+
+ if (sync_msg > 50)
+
+ sync_reg = 0x80; /* Use 4MB/s */
+
+ if (sync_msg > 62)
+
+ sync_reg = 0xA0; /* Use 3.33MB/s */
+
+ if (sync_msg > 75)
+
+ sync_reg = 0xC0; /* Use 2.85MB/s */
+
+ if (sync_msg > 87)
+
+ sync_reg = 0xE0; /* Use 2.5MB/s */
+
+ if (sync_msg > 100) {
+
+ sync_reg = 0x00; /* Use ASYNC */
+ offset = 0x00;
+ }
+
+ if (currTar_Info->TarStatus & WIDE_ENABLED)
+
+ sync_reg |= offset;
+
+ else
+
+ sync_reg |= (offset | NARROW_SCSI);
+
+ FPT_sssyncv(port, currSCCB->TargID, sync_reg, currTar_Info);
+
+ if (currSCCB->Sccb_scsistat == SELECT_SN_ST) {
+
+ ACCEPT_MSG(port);
+
+ currTar_Info->TarStatus = ((currTar_Info->TarStatus &
+ ~(unsigned char)TAR_SYNC_MASK) |
+ (unsigned char)SYNC_SUPPORTED);
+
+ WR_HARPOON(port + hp_autostart_1,
+ (AUTO_IMMED + DISCONNECT_START));
+ }
+
+ else {
+
+ ACCEPT_MSG_ATN(port);
+
+ FPT_sisyncr(port, sync_msg, offset);
+
+ currTar_Info->TarStatus = ((currTar_Info->TarStatus &
+ ~(unsigned char)TAR_SYNC_MASK) |
+ (unsigned char)SYNC_SUPPORTED);
+ }
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: FPT_sisyncr
+ *
+ * Description: Answer the targets sync message.
+ *
+ *---------------------------------------------------------------------*/
+static void FPT_sisyncr(u32 port, unsigned char sync_pulse,
+ unsigned char offset)
+{
+ ARAM_ACCESS(port);
+ WRW_HARPOON((port + SYNC_MSGS + 0),
+ (MPM_OP + AMSG_OUT + EXTENDED_MESSAGE));
+ WRW_HARPOON((port + SYNC_MSGS + 2), (MPM_OP + AMSG_OUT + 0x03));
+ WRW_HARPOON((port + SYNC_MSGS + 4),
+ (MPM_OP + AMSG_OUT + EXTENDED_SDTR));
+ WRW_HARPOON((port + SYNC_MSGS + 6), (MPM_OP + AMSG_OUT + sync_pulse));
+ WRW_HARPOON((port + SYNC_MSGS + 8), (RAT_OP));
+ WRW_HARPOON((port + SYNC_MSGS + 10), (MPM_OP + AMSG_OUT + offset));
+ WRW_HARPOON((port + SYNC_MSGS + 12), (BRH_OP + ALWAYS + NP));
+ SGRAM_ACCESS(port);
+
+ WR_HARPOON(port + hp_portctrl_0, SCSI_PORT);
+ WRW_HARPOON((port + hp_intstat), CLR_ALL_INT_1);
+
+ WR_HARPOON(port + hp_autostart_3, (AUTO_IMMED + CMD_ONLY_STRT));
+
+ while (!(RDW_HARPOON((port + hp_intstat)) & (BUS_FREE | AUTO_INT))) {
+ }
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: FPT_siwidn
+ *
+ * Description: Read in a message byte from the SCSI bus, and check
+ * for a parity error.
+ *
+ *---------------------------------------------------------------------*/
+
+static unsigned char FPT_siwidn(u32 port, unsigned char p_card)
+{
+ struct sccb *currSCCB;
+ struct sccb_mgr_tar_info *currTar_Info;
+
+ currSCCB = FPT_BL_Card[p_card].currentSCCB;
+ currTar_Info = &FPT_sccbMgrTbl[p_card][currSCCB->TargID];
+
+ if (!((currTar_Info->TarStatus & TAR_WIDE_MASK) == WIDE_NEGOCIATED)) {
+
+ WRW_HARPOON((port + ID_MSG_STRT),
+ (MPM_OP + AMSG_OUT +
+ (currSCCB->
+ Sccb_idmsg & ~(unsigned char)DISC_PRIV)));
+
+ WRW_HARPOON((port + ID_MSG_STRT + 2), BRH_OP + ALWAYS + CMDPZ);
+
+ WRW_HARPOON((port + SYNC_MSGS + 0),
+ (MPM_OP + AMSG_OUT + EXTENDED_MESSAGE));
+ WRW_HARPOON((port + SYNC_MSGS + 2), (MPM_OP + AMSG_OUT + 0x02));
+ WRW_HARPOON((port + SYNC_MSGS + 4),
+ (MPM_OP + AMSG_OUT + EXTENDED_WDTR));
+ WRW_HARPOON((port + SYNC_MSGS + 6), (RAT_OP));
+ WRW_HARPOON((port + SYNC_MSGS + 8),
+ (MPM_OP + AMSG_OUT + SM16BIT));
+ WRW_HARPOON((port + SYNC_MSGS + 10), (BRH_OP + ALWAYS + NP));
+
+ WR_HARPOON(port + hp_autostart_3, (SELECT + SELCHK_STRT));
+
+ currTar_Info->TarStatus = ((currTar_Info->TarStatus &
+ ~(unsigned char)TAR_WIDE_MASK) |
+ (unsigned char)WIDE_ENABLED);
+
+ return 1;
+ }
+
+ else {
+
+ currTar_Info->TarStatus = ((currTar_Info->TarStatus &
+ ~(unsigned char)TAR_WIDE_MASK) |
+ WIDE_NEGOCIATED);
+
+ currTar_Info->TarEEValue &= ~EE_WIDE_SCSI;
+ return 0;
+ }
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: FPT_stwidn
+ *
+ * Description: The has sent us a Wide Nego message so handle it as
+ * necessary.
+ *
+ *---------------------------------------------------------------------*/
+static void FPT_stwidn(u32 port, unsigned char p_card)
+{
+ unsigned char width;
+ struct sccb *currSCCB;
+ struct sccb_mgr_tar_info *currTar_Info;
+
+ currSCCB = FPT_BL_Card[p_card].currentSCCB;
+ currTar_Info = &FPT_sccbMgrTbl[p_card][currSCCB->TargID];
+
+ width = FPT_sfm(port, currSCCB);
+
+ if ((width == 0x00) && (currSCCB->Sccb_scsimsg == MSG_PARITY_ERROR)) {
+ WR_HARPOON(port + hp_autostart_1,
+ (AUTO_IMMED + DISCONNECT_START));
+ return;
+ }
+
+ if (!(currTar_Info->TarEEValue & EE_WIDE_SCSI))
+ width = 0;
+
+ if (width) {
+ currTar_Info->TarStatus |= WIDE_ENABLED;
+ width = 0;
+ } else {
+ width = NARROW_SCSI;
+ currTar_Info->TarStatus &= ~WIDE_ENABLED;
+ }
+
+ FPT_sssyncv(port, currSCCB->TargID, width, currTar_Info);
+
+ if (currSCCB->Sccb_scsistat == SELECT_WN_ST) {
+
+ currTar_Info->TarStatus |= WIDE_NEGOCIATED;
+
+ if (!
+ ((currTar_Info->TarStatus & TAR_SYNC_MASK) ==
+ SYNC_SUPPORTED)) {
+ ACCEPT_MSG_ATN(port);
+ ARAM_ACCESS(port);
+ FPT_sisyncn(port, p_card, 1);
+ currSCCB->Sccb_scsistat = SELECT_SN_ST;
+ SGRAM_ACCESS(port);
+ } else {
+ ACCEPT_MSG(port);
+ WR_HARPOON(port + hp_autostart_1,
+ (AUTO_IMMED + DISCONNECT_START));
+ }
+ }
+
+ else {
+
+ ACCEPT_MSG_ATN(port);
+
+ if (currTar_Info->TarEEValue & EE_WIDE_SCSI)
+ width = SM16BIT;
+ else
+ width = SM8BIT;
+
+ FPT_siwidr(port, width);
+
+ currTar_Info->TarStatus |= (WIDE_NEGOCIATED | WIDE_ENABLED);
+ }
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: FPT_siwidr
+ *
+ * Description: Answer the targets Wide nego message.
+ *
+ *---------------------------------------------------------------------*/
+static void FPT_siwidr(u32 port, unsigned char width)
+{
+ ARAM_ACCESS(port);
+ WRW_HARPOON((port + SYNC_MSGS + 0),
+ (MPM_OP + AMSG_OUT + EXTENDED_MESSAGE));
+ WRW_HARPOON((port + SYNC_MSGS + 2), (MPM_OP + AMSG_OUT + 0x02));
+ WRW_HARPOON((port + SYNC_MSGS + 4),
+ (MPM_OP + AMSG_OUT + EXTENDED_WDTR));
+ WRW_HARPOON((port + SYNC_MSGS + 6), (RAT_OP));
+ WRW_HARPOON((port + SYNC_MSGS + 8), (MPM_OP + AMSG_OUT + width));
+ WRW_HARPOON((port + SYNC_MSGS + 10), (BRH_OP + ALWAYS + NP));
+ SGRAM_ACCESS(port);
+
+ WR_HARPOON(port + hp_portctrl_0, SCSI_PORT);
+ WRW_HARPOON((port + hp_intstat), CLR_ALL_INT_1);
+
+ WR_HARPOON(port + hp_autostart_3, (AUTO_IMMED + CMD_ONLY_STRT));
+
+ while (!(RDW_HARPOON((port + hp_intstat)) & (BUS_FREE | AUTO_INT))) {
+ }
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: FPT_sssyncv
+ *
+ * Description: Write the desired value to the Sync Register for the
+ * ID specified.
+ *
+ *---------------------------------------------------------------------*/
+static void FPT_sssyncv(u32 p_port, unsigned char p_id,
+ unsigned char p_sync_value,
+ struct sccb_mgr_tar_info *currTar_Info)
+{
+ unsigned char index;
+
+ index = p_id;
+
+ switch (index) {
+
+ case 0:
+ index = 12; /* hp_synctarg_0 */
+ break;
+ case 1:
+ index = 13; /* hp_synctarg_1 */
+ break;
+ case 2:
+ index = 14; /* hp_synctarg_2 */
+ break;
+ case 3:
+ index = 15; /* hp_synctarg_3 */
+ break;
+ case 4:
+ index = 8; /* hp_synctarg_4 */
+ break;
+ case 5:
+ index = 9; /* hp_synctarg_5 */
+ break;
+ case 6:
+ index = 10; /* hp_synctarg_6 */
+ break;
+ case 7:
+ index = 11; /* hp_synctarg_7 */
+ break;
+ case 8:
+ index = 4; /* hp_synctarg_8 */
+ break;
+ case 9:
+ index = 5; /* hp_synctarg_9 */
+ break;
+ case 10:
+ index = 6; /* hp_synctarg_10 */
+ break;
+ case 11:
+ index = 7; /* hp_synctarg_11 */
+ break;
+ case 12:
+ index = 0; /* hp_synctarg_12 */
+ break;
+ case 13:
+ index = 1; /* hp_synctarg_13 */
+ break;
+ case 14:
+ index = 2; /* hp_synctarg_14 */
+ break;
+ case 15:
+ index = 3; /* hp_synctarg_15 */
+
+ }
+
+ WR_HARPOON(p_port + hp_synctarg_base + index, p_sync_value);
+
+ currTar_Info->TarSyncCtrl = p_sync_value;
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: FPT_sresb
+ *
+ * Description: Reset the desired card's SCSI bus.
+ *
+ *---------------------------------------------------------------------*/
+static void FPT_sresb(u32 port, unsigned char p_card)
+{
+ unsigned char scsiID, i;
+
+ struct sccb_mgr_tar_info *currTar_Info;
+
+ WR_HARPOON(port + hp_page_ctrl,
+ (RD_HARPOON(port + hp_page_ctrl) | G_INT_DISABLE));
+ WRW_HARPOON((port + hp_intstat), CLR_ALL_INT);
+
+ WR_HARPOON(port + hp_scsictrl_0, SCSI_RST);
+
+ scsiID = RD_HARPOON(port + hp_seltimeout);
+ WR_HARPOON(port + hp_seltimeout, TO_5ms);
+ WRW_HARPOON((port + hp_intstat), TIMEOUT);
+
+ WR_HARPOON(port + hp_portctrl_0, (SCSI_PORT | START_TO));
+
+ while (!(RDW_HARPOON((port + hp_intstat)) & TIMEOUT)) {
+ }
+
+ WR_HARPOON(port + hp_seltimeout, scsiID);
+
+ WR_HARPOON(port + hp_scsictrl_0, ENA_SCAM_SEL);
+
+ FPT_Wait(port, TO_5ms);
+
+ WRW_HARPOON((port + hp_intstat), CLR_ALL_INT);
+
+ WR_HARPOON(port + hp_int_mask, (RD_HARPOON(port + hp_int_mask) | 0x00));
+
+ for (scsiID = 0; scsiID < MAX_SCSI_TAR; scsiID++) {
+ currTar_Info = &FPT_sccbMgrTbl[p_card][scsiID];
+
+ if (currTar_Info->TarEEValue & EE_SYNC_MASK) {
+ currTar_Info->TarSyncCtrl = 0;
+ currTar_Info->TarStatus &= ~TAR_SYNC_MASK;
+ }
+
+ if (currTar_Info->TarEEValue & EE_WIDE_SCSI) {
+ currTar_Info->TarStatus &= ~TAR_WIDE_MASK;
+ }
+
+ FPT_sssyncv(port, scsiID, NARROW_SCSI, currTar_Info);
+
+ FPT_SccbMgrTableInitTarget(p_card, scsiID);
+ }
+
+ FPT_BL_Card[p_card].scanIndex = 0x00;
+ FPT_BL_Card[p_card].currentSCCB = NULL;
+ FPT_BL_Card[p_card].globalFlags &= ~(F_TAG_STARTED | F_HOST_XFER_ACT
+ | F_NEW_SCCB_CMD);
+ FPT_BL_Card[p_card].cmdCounter = 0x00;
+ FPT_BL_Card[p_card].discQCount = 0x00;
+ FPT_BL_Card[p_card].tagQ_Lst = 0x01;
+
+ for (i = 0; i < QUEUE_DEPTH; i++)
+ FPT_BL_Card[p_card].discQ_Tbl[i] = NULL;
+
+ WR_HARPOON(port + hp_page_ctrl,
+ (RD_HARPOON(port + hp_page_ctrl) & ~G_INT_DISABLE));
+
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: FPT_ssenss
+ *
+ * Description: Setup for the Auto Sense command.
+ *
+ *---------------------------------------------------------------------*/
+static void FPT_ssenss(struct sccb_card *pCurrCard)
+{
+ unsigned char i;
+ struct sccb *currSCCB;
+
+ currSCCB = pCurrCard->currentSCCB;
+
+ currSCCB->Save_CdbLen = currSCCB->CdbLength;
+
+ for (i = 0; i < 6; i++) {
+
+ currSCCB->Save_Cdb[i] = currSCCB->Cdb[i];
+ }
+
+ currSCCB->CdbLength = SIX_BYTE_CMD;
+ currSCCB->Cdb[0] = REQUEST_SENSE;
+ currSCCB->Cdb[1] = currSCCB->Cdb[1] & (unsigned char)0xE0; /*Keep LUN. */
+ currSCCB->Cdb[2] = 0x00;
+ currSCCB->Cdb[3] = 0x00;
+ currSCCB->Cdb[4] = currSCCB->RequestSenseLength;
+ currSCCB->Cdb[5] = 0x00;
+
+ currSCCB->Sccb_XferCnt = (u32)currSCCB->RequestSenseLength;
+
+ currSCCB->Sccb_ATC = 0x00;
+
+ currSCCB->Sccb_XferState |= F_AUTO_SENSE;
+
+ currSCCB->Sccb_XferState &= ~F_SG_XFER;
+
+ currSCCB->Sccb_idmsg = currSCCB->Sccb_idmsg & ~(unsigned char)DISC_PRIV;
+
+ currSCCB->ControlByte = 0x00;
+
+ currSCCB->Sccb_MGRFlags &= F_STATUSLOADED;
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: FPT_sxfrp
+ *
+ * Description: Transfer data into the bit bucket until the device
+ * decides to switch phase.
+ *
+ *---------------------------------------------------------------------*/
+
+static void FPT_sxfrp(u32 p_port, unsigned char p_card)
+{
+ unsigned char curr_phz;
+
+ DISABLE_AUTO(p_port);
+
+ if (FPT_BL_Card[p_card].globalFlags & F_HOST_XFER_ACT) {
+
+ FPT_hostDataXferAbort(p_port, p_card,
+ FPT_BL_Card[p_card].currentSCCB);
+
+ }
+
+ /* If the Automation handled the end of the transfer then do not
+ match the phase or we will get out of sync with the ISR. */
+
+ if (RDW_HARPOON((p_port + hp_intstat)) &
+ (BUS_FREE | XFER_CNT_0 | AUTO_INT))
+ return;
+
+ WR_HARPOON(p_port + hp_xfercnt_0, 0x00);
+
+ curr_phz = RD_HARPOON(p_port + hp_scsisig) & (unsigned char)S_SCSI_PHZ;
+
+ WRW_HARPOON((p_port + hp_intstat), XFER_CNT_0);
+
+ WR_HARPOON(p_port + hp_scsisig, curr_phz);
+
+ while (!(RDW_HARPOON((p_port + hp_intstat)) & (BUS_FREE | RESET)) &&
+ (curr_phz ==
+ (RD_HARPOON(p_port + hp_scsisig) & (unsigned char)S_SCSI_PHZ)))
+ {
+ if (curr_phz & (unsigned char)SCSI_IOBIT) {
+ WR_HARPOON(p_port + hp_portctrl_0,
+ (SCSI_PORT | HOST_PORT | SCSI_INBIT));
+
+ if (!(RD_HARPOON(p_port + hp_xferstat) & FIFO_EMPTY)) {
+ RD_HARPOON(p_port + hp_fifodata_0);
+ }
+ } else {
+ WR_HARPOON(p_port + hp_portctrl_0,
+ (SCSI_PORT | HOST_PORT | HOST_WRT));
+ if (RD_HARPOON(p_port + hp_xferstat) & FIFO_EMPTY) {
+ WR_HARPOON(p_port + hp_fifodata_0, 0xFA);
+ }
+ }
+ } /* End of While loop for padding data I/O phase */
+
+ while (!(RDW_HARPOON((p_port + hp_intstat)) & (BUS_FREE | RESET))) {
+ if (RD_HARPOON(p_port + hp_scsisig) & SCSI_REQ)
+ break;
+ }
+
+ WR_HARPOON(p_port + hp_portctrl_0,
+ (SCSI_PORT | HOST_PORT | SCSI_INBIT));
+ while (!(RD_HARPOON(p_port + hp_xferstat) & FIFO_EMPTY)) {
+ RD_HARPOON(p_port + hp_fifodata_0);
+ }
+
+ if (!(RDW_HARPOON((p_port + hp_intstat)) & (BUS_FREE | RESET))) {
+ WR_HARPOON(p_port + hp_autostart_0,
+ (AUTO_IMMED + DISCONNECT_START));
+ while (!(RDW_HARPOON((p_port + hp_intstat)) & AUTO_INT)) {
+ }
+
+ if (RDW_HARPOON((p_port + hp_intstat)) &
+ (ICMD_COMP | ITAR_DISC))
+ while (!
+ (RDW_HARPOON((p_port + hp_intstat)) &
+ (BUS_FREE | RSEL))) ;
+ }
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: FPT_schkdd
+ *
+ * Description: Make sure data has been flushed from both FIFOs and abort
+ * the operations if necessary.
+ *
+ *---------------------------------------------------------------------*/
+
+static void FPT_schkdd(u32 port, unsigned char p_card)
+{
+ unsigned short TimeOutLoop;
+ unsigned char sPhase;
+
+ struct sccb *currSCCB;
+
+ currSCCB = FPT_BL_Card[p_card].currentSCCB;
+
+ if ((currSCCB->Sccb_scsistat != DATA_OUT_ST) &&
+ (currSCCB->Sccb_scsistat != DATA_IN_ST)) {
+ return;
+ }
+
+ if (currSCCB->Sccb_XferState & F_ODD_BALL_CNT) {
+
+ currSCCB->Sccb_ATC += (currSCCB->Sccb_XferCnt - 1);
+
+ currSCCB->Sccb_XferCnt = 1;
+
+ currSCCB->Sccb_XferState &= ~F_ODD_BALL_CNT;
+ WRW_HARPOON((port + hp_fiforead), (unsigned short)0x00);
+ WR_HARPOON(port + hp_xferstat, 0x00);
+ }
+
+ else {
+
+ currSCCB->Sccb_ATC += currSCCB->Sccb_XferCnt;
+
+ currSCCB->Sccb_XferCnt = 0;
+ }
+
+ if ((RDW_HARPOON((port + hp_intstat)) & PARITY) &&
+ (currSCCB->HostStatus == SCCB_COMPLETE)) {
+
+ currSCCB->HostStatus = SCCB_PARITY_ERR;
+ WRW_HARPOON((port + hp_intstat), PARITY);
+ }
+
+ FPT_hostDataXferAbort(port, p_card, currSCCB);
+
+ while (RD_HARPOON(port + hp_scsisig) & SCSI_ACK) {
+ }
+
+ TimeOutLoop = 0;
+
+ while (RD_HARPOON(port + hp_xferstat) & FIFO_EMPTY) {
+ if (RDW_HARPOON((port + hp_intstat)) & BUS_FREE) {
+ return;
+ }
+ if (RD_HARPOON(port + hp_offsetctr) & (unsigned char)0x1F) {
+ break;
+ }
+ if (RDW_HARPOON((port + hp_intstat)) & RESET) {
+ return;
+ }
+ if ((RD_HARPOON(port + hp_scsisig) & SCSI_REQ)
+ || (TimeOutLoop++ > 0x3000))
+ break;
+ }
+
+ sPhase = RD_HARPOON(port + hp_scsisig) & (SCSI_BSY | S_SCSI_PHZ);
+ if ((!(RD_HARPOON(port + hp_xferstat) & FIFO_EMPTY)) ||
+ (RD_HARPOON(port + hp_offsetctr) & (unsigned char)0x1F) ||
+ (sPhase == (SCSI_BSY | S_DATAO_PH)) ||
+ (sPhase == (SCSI_BSY | S_DATAI_PH))) {
+
+ WR_HARPOON(port + hp_portctrl_0, SCSI_PORT);
+
+ if (!(currSCCB->Sccb_XferState & F_ALL_XFERRED)) {
+ if (currSCCB->Sccb_XferState & F_HOST_XFER_DIR) {
+ FPT_phaseDataIn(port, p_card);
+ }
+
+ else {
+ FPT_phaseDataOut(port, p_card);
+ }
+ } else {
+ FPT_sxfrp(port, p_card);
+ if (!(RDW_HARPOON((port + hp_intstat)) &
+ (BUS_FREE | ICMD_COMP | ITAR_DISC | RESET))) {
+ WRW_HARPOON((port + hp_intstat), AUTO_INT);
+ FPT_phaseDecode(port, p_card);
+ }
+ }
+
+ }
+
+ else {
+ WR_HARPOON(port + hp_portctrl_0, 0x00);
+ }
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: FPT_sinits
+ *
+ * Description: Setup SCCB manager fields in this SCCB.
+ *
+ *---------------------------------------------------------------------*/
+
+static void FPT_sinits(struct sccb *p_sccb, unsigned char p_card)
+{
+ struct sccb_mgr_tar_info *currTar_Info;
+
+ if ((p_sccb->TargID >= MAX_SCSI_TAR) || (p_sccb->Lun >= MAX_LUN)) {
+ return;
+ }
+ currTar_Info = &FPT_sccbMgrTbl[p_card][p_sccb->TargID];
+
+ p_sccb->Sccb_XferState = 0x00;
+ p_sccb->Sccb_XferCnt = p_sccb->DataLength;
+
+ if ((p_sccb->OperationCode == SCATTER_GATHER_COMMAND) ||
+ (p_sccb->OperationCode == RESIDUAL_SG_COMMAND)) {
+
+ p_sccb->Sccb_SGoffset = 0;
+ p_sccb->Sccb_XferState = F_SG_XFER;
+ p_sccb->Sccb_XferCnt = 0x00;
+ }
+
+ if (p_sccb->DataLength == 0x00)
+
+ p_sccb->Sccb_XferState |= F_ALL_XFERRED;
+
+ if (p_sccb->ControlByte & F_USE_CMD_Q) {
+ if ((currTar_Info->TarStatus & TAR_TAG_Q_MASK) == TAG_Q_REJECT)
+ p_sccb->ControlByte &= ~F_USE_CMD_Q;
+
+ else
+ currTar_Info->TarStatus |= TAG_Q_TRYING;
+ }
+
+/* For !single SCSI device in system & device allow Disconnect
+ or command is tag_q type then send Cmd with Disconnect Enable
+ else send Cmd with Disconnect Disable */
+
+/*
+ if (((!(FPT_BL_Card[p_card].globalFlags & F_SINGLE_DEVICE)) &&
+ (currTar_Info->TarStatus & TAR_ALLOW_DISC)) ||
+ (currTar_Info->TarStatus & TAG_Q_TRYING)) {
+*/
+ if ((currTar_Info->TarStatus & TAR_ALLOW_DISC) ||
+ (currTar_Info->TarStatus & TAG_Q_TRYING)) {
+ p_sccb->Sccb_idmsg = IDENTIFY(true, p_sccb->Lun);
+ } else {
+ p_sccb->Sccb_idmsg = IDENTIFY(false, p_sccb->Lun);
+ }
+
+ p_sccb->HostStatus = 0x00;
+ p_sccb->TargetStatus = 0x00;
+ p_sccb->Sccb_tag = 0x00;
+ p_sccb->Sccb_MGRFlags = 0x00;
+ p_sccb->Sccb_sgseg = 0x00;
+ p_sccb->Sccb_ATC = 0x00;
+ p_sccb->Sccb_savedATC = 0x00;
+/*
+ p_sccb->SccbVirtDataPtr = 0x00;
+ p_sccb->Sccb_forwardlink = NULL;
+ p_sccb->Sccb_backlink = NULL;
+ */
+ p_sccb->Sccb_scsistat = BUS_FREE_ST;
+ p_sccb->SccbStatus = SCCB_IN_PROCESS;
+ p_sccb->Sccb_scsimsg = NOP;
+
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: Phase Decode
+ *
+ * Description: Determine the phase and call the appropriate function.
+ *
+ *---------------------------------------------------------------------*/
+
+static void FPT_phaseDecode(u32 p_port, unsigned char p_card)
+{
+ unsigned char phase_ref;
+ void (*phase) (u32, unsigned char);
+
+ DISABLE_AUTO(p_port);
+
+ phase_ref =
+ (unsigned char)(RD_HARPOON(p_port + hp_scsisig) & S_SCSI_PHZ);
+
+ phase = FPT_s_PhaseTbl[phase_ref];
+
+ (*phase) (p_port, p_card); /* Call the correct phase func */
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: Data Out Phase
+ *
+ * Description: Start up both the BusMaster and Xbow.
+ *
+ *---------------------------------------------------------------------*/
+
+static void FPT_phaseDataOut(u32 port, unsigned char p_card)
+{
+
+ struct sccb *currSCCB;
+
+ currSCCB = FPT_BL_Card[p_card].currentSCCB;
+ if (currSCCB == NULL) {
+ return; /* Exit if No SCCB record */
+ }
+
+ currSCCB->Sccb_scsistat = DATA_OUT_ST;
+ currSCCB->Sccb_XferState &= ~(F_HOST_XFER_DIR | F_NO_DATA_YET);
+
+ WR_HARPOON(port + hp_portctrl_0, SCSI_PORT);
+
+ WRW_HARPOON((port + hp_intstat), XFER_CNT_0);
+
+ WR_HARPOON(port + hp_autostart_0, (END_DATA + END_DATA_START));
+
+ FPT_dataXferProcessor(port, &FPT_BL_Card[p_card]);
+
+ if (currSCCB->Sccb_XferCnt == 0) {
+
+ if ((currSCCB->ControlByte & SCCB_DATA_XFER_OUT) &&
+ (currSCCB->HostStatus == SCCB_COMPLETE))
+ currSCCB->HostStatus = SCCB_DATA_OVER_RUN;
+
+ FPT_sxfrp(port, p_card);
+ if (!(RDW_HARPOON((port + hp_intstat)) & (BUS_FREE | RESET)))
+ FPT_phaseDecode(port, p_card);
+ }
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: Data In Phase
+ *
+ * Description: Startup the BusMaster and the XBOW.
+ *
+ *---------------------------------------------------------------------*/
+
+static void FPT_phaseDataIn(u32 port, unsigned char p_card)
+{
+
+ struct sccb *currSCCB;
+
+ currSCCB = FPT_BL_Card[p_card].currentSCCB;
+
+ if (currSCCB == NULL) {
+ return; /* Exit if No SCCB record */
+ }
+
+ currSCCB->Sccb_scsistat = DATA_IN_ST;
+ currSCCB->Sccb_XferState |= F_HOST_XFER_DIR;
+ currSCCB->Sccb_XferState &= ~F_NO_DATA_YET;
+
+ WR_HARPOON(port + hp_portctrl_0, SCSI_PORT);
+
+ WRW_HARPOON((port + hp_intstat), XFER_CNT_0);
+
+ WR_HARPOON(port + hp_autostart_0, (END_DATA + END_DATA_START));
+
+ FPT_dataXferProcessor(port, &FPT_BL_Card[p_card]);
+
+ if (currSCCB->Sccb_XferCnt == 0) {
+
+ if ((currSCCB->ControlByte & SCCB_DATA_XFER_IN) &&
+ (currSCCB->HostStatus == SCCB_COMPLETE))
+ currSCCB->HostStatus = SCCB_DATA_OVER_RUN;
+
+ FPT_sxfrp(port, p_card);
+ if (!(RDW_HARPOON((port + hp_intstat)) & (BUS_FREE | RESET)))
+ FPT_phaseDecode(port, p_card);
+
+ }
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: Command Phase
+ *
+ * Description: Load the CDB into the automation and start it up.
+ *
+ *---------------------------------------------------------------------*/
+
+static void FPT_phaseCommand(u32 p_port, unsigned char p_card)
+{
+ struct sccb *currSCCB;
+ u32 cdb_reg;
+ unsigned char i;
+
+ currSCCB = FPT_BL_Card[p_card].currentSCCB;
+
+ if (currSCCB->OperationCode == RESET_COMMAND) {
+
+ currSCCB->HostStatus = SCCB_PHASE_SEQUENCE_FAIL;
+ currSCCB->CdbLength = SIX_BYTE_CMD;
+ }
+
+ WR_HARPOON(p_port + hp_scsisig, 0x00);
+
+ ARAM_ACCESS(p_port);
+
+ cdb_reg = p_port + CMD_STRT;
+
+ for (i = 0; i < currSCCB->CdbLength; i++) {
+
+ if (currSCCB->OperationCode == RESET_COMMAND)
+
+ WRW_HARPOON(cdb_reg, (MPM_OP + ACOMMAND + 0x00));
+
+ else
+ WRW_HARPOON(cdb_reg,
+ (MPM_OP + ACOMMAND + currSCCB->Cdb[i]));
+ cdb_reg += 2;
+ }
+
+ if (currSCCB->CdbLength != TWELVE_BYTE_CMD)
+ WRW_HARPOON(cdb_reg, (BRH_OP + ALWAYS + NP));
+
+ WR_HARPOON(p_port + hp_portctrl_0, (SCSI_PORT));
+
+ currSCCB->Sccb_scsistat = COMMAND_ST;
+
+ WR_HARPOON(p_port + hp_autostart_3, (AUTO_IMMED | CMD_ONLY_STRT));
+ SGRAM_ACCESS(p_port);
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: Status phase
+ *
+ * Description: Bring in the status and command complete message bytes
+ *
+ *---------------------------------------------------------------------*/
+
+static void FPT_phaseStatus(u32 port, unsigned char p_card)
+{
+ /* Start-up the automation to finish off this command and let the
+ isr handle the interrupt for command complete when it comes in.
+ We could wait here for the interrupt to be generated?
+ */
+
+ WR_HARPOON(port + hp_scsisig, 0x00);
+
+ WR_HARPOON(port + hp_autostart_0, (AUTO_IMMED + END_DATA_START));
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: Phase Message Out
+ *
+ * Description: Send out our message (if we have one) and handle whatever
+ * else is involed.
+ *
+ *---------------------------------------------------------------------*/
+
+static void FPT_phaseMsgOut(u32 port, unsigned char p_card)
+{
+ unsigned char message, scsiID;
+ struct sccb *currSCCB;
+ struct sccb_mgr_tar_info *currTar_Info;
+
+ currSCCB = FPT_BL_Card[p_card].currentSCCB;
+
+ if (currSCCB != NULL) {
+
+ message = currSCCB->Sccb_scsimsg;
+ scsiID = currSCCB->TargID;
+
+ if (message == TARGET_RESET) {
+
+ currTar_Info = &FPT_sccbMgrTbl[p_card][scsiID];
+ currTar_Info->TarSyncCtrl = 0;
+ FPT_sssyncv(port, scsiID, NARROW_SCSI, currTar_Info);
+
+ if (FPT_sccbMgrTbl[p_card][scsiID].
+ TarEEValue & EE_SYNC_MASK) {
+
+ FPT_sccbMgrTbl[p_card][scsiID].TarStatus &=
+ ~TAR_SYNC_MASK;
+
+ }
+
+ if (FPT_sccbMgrTbl[p_card][scsiID].
+ TarEEValue & EE_WIDE_SCSI) {
+
+ FPT_sccbMgrTbl[p_card][scsiID].TarStatus &=
+ ~TAR_WIDE_MASK;
+ }
+
+ FPT_queueFlushSccb(p_card, SCCB_COMPLETE);
+ FPT_SccbMgrTableInitTarget(p_card, scsiID);
+ } else if (currSCCB->Sccb_scsistat == ABORT_ST) {
+ currSCCB->HostStatus = SCCB_COMPLETE;
+ if (FPT_BL_Card[p_card].discQ_Tbl[currSCCB->Sccb_tag] !=
+ NULL) {
+ FPT_BL_Card[p_card].discQ_Tbl[currSCCB->
+ Sccb_tag] = NULL;
+ FPT_sccbMgrTbl[p_card][scsiID].TarTagQ_Cnt--;
+ }
+
+ }
+
+ else if (currSCCB->Sccb_scsistat < COMMAND_ST) {
+
+ if (message == NOP) {
+ currSCCB->Sccb_MGRFlags |= F_DEV_SELECTED;
+
+ FPT_ssel(port, p_card);
+ return;
+ }
+ } else {
+
+ if (message == ABORT_TASK_SET)
+
+ FPT_queueFlushSccb(p_card, SCCB_COMPLETE);
+ }
+
+ } else {
+ message = ABORT_TASK_SET;
+ }
+
+ WRW_HARPOON((port + hp_intstat), (BUS_FREE | PHASE | XFER_CNT_0));
+
+ WR_HARPOON(port + hp_portctrl_0, SCSI_BUS_EN);
+
+ WR_HARPOON(port + hp_scsidata_0, message);
+
+ WR_HARPOON(port + hp_scsisig, (SCSI_ACK + S_ILL_PH));
+
+ ACCEPT_MSG(port);
+
+ WR_HARPOON(port + hp_portctrl_0, 0x00);
+
+ if ((message == ABORT_TASK_SET) || (message == TARGET_RESET) ||
+ (message == ABORT_TASK)) {
+
+ while (!(RDW_HARPOON((port + hp_intstat)) & (BUS_FREE | PHASE))) {
+ }
+
+ if (RDW_HARPOON((port + hp_intstat)) & BUS_FREE) {
+ WRW_HARPOON((port + hp_intstat), BUS_FREE);
+
+ if (currSCCB != NULL) {
+
+ if ((FPT_BL_Card[p_card].
+ globalFlags & F_CONLUN_IO)
+ &&
+ ((FPT_sccbMgrTbl[p_card][currSCCB->TargID].
+ TarStatus & TAR_TAG_Q_MASK) !=
+ TAG_Q_TRYING))
+ FPT_sccbMgrTbl[p_card][currSCCB->
+ TargID].
+ TarLUNBusy[currSCCB->Lun] = 0;
+ else
+ FPT_sccbMgrTbl[p_card][currSCCB->
+ TargID].
+ TarLUNBusy[0] = 0;
+
+ FPT_queueCmdComplete(&FPT_BL_Card[p_card],
+ currSCCB, p_card);
+ }
+
+ else {
+ FPT_BL_Card[p_card].globalFlags |=
+ F_NEW_SCCB_CMD;
+ }
+ }
+
+ else {
+
+ FPT_sxfrp(port, p_card);
+ }
+ }
+
+ else {
+
+ if (message == MSG_PARITY_ERROR) {
+ currSCCB->Sccb_scsimsg = NOP;
+ WR_HARPOON(port + hp_autostart_1,
+ (AUTO_IMMED + DISCONNECT_START));
+ } else {
+ FPT_sxfrp(port, p_card);
+ }
+ }
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: Message In phase
+ *
+ * Description: Bring in the message and determine what to do with it.
+ *
+ *---------------------------------------------------------------------*/
+
+static void FPT_phaseMsgIn(u32 port, unsigned char p_card)
+{
+ unsigned char message;
+ struct sccb *currSCCB;
+
+ currSCCB = FPT_BL_Card[p_card].currentSCCB;
+
+ if (FPT_BL_Card[p_card].globalFlags & F_HOST_XFER_ACT) {
+
+ FPT_phaseChkFifo(port, p_card);
+ }
+
+ message = RD_HARPOON(port + hp_scsidata_0);
+ if ((message == DISCONNECT) || (message == SAVE_POINTERS)) {
+
+ WR_HARPOON(port + hp_autostart_1,
+ (AUTO_IMMED + END_DATA_START));
+
+ }
+
+ else {
+
+ message = FPT_sfm(port, currSCCB);
+ if (message) {
+
+ FPT_sdecm(message, port, p_card);
+
+ } else {
+ if (currSCCB->Sccb_scsimsg != MSG_PARITY_ERROR)
+ ACCEPT_MSG(port);
+ WR_HARPOON(port + hp_autostart_1,
+ (AUTO_IMMED + DISCONNECT_START));
+ }
+ }
+
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: Illegal phase
+ *
+ * Description: Target switched to some illegal phase, so all we can do
+ * is report an error back to the host (if that is possible)
+ * and send an ABORT message to the misbehaving target.
+ *
+ *---------------------------------------------------------------------*/
+
+static void FPT_phaseIllegal(u32 port, unsigned char p_card)
+{
+ struct sccb *currSCCB;
+
+ currSCCB = FPT_BL_Card[p_card].currentSCCB;
+
+ WR_HARPOON(port + hp_scsisig, RD_HARPOON(port + hp_scsisig));
+ if (currSCCB != NULL) {
+
+ currSCCB->HostStatus = SCCB_PHASE_SEQUENCE_FAIL;
+ currSCCB->Sccb_scsistat = ABORT_ST;
+ currSCCB->Sccb_scsimsg = ABORT_TASK_SET;
+ }
+
+ ACCEPT_MSG_ATN(port);
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: Phase Check FIFO
+ *
+ * Description: Make sure data has been flushed from both FIFOs and abort
+ * the operations if necessary.
+ *
+ *---------------------------------------------------------------------*/
+
+static void FPT_phaseChkFifo(u32 port, unsigned char p_card)
+{
+ u32 xfercnt;
+ struct sccb *currSCCB;
+
+ currSCCB = FPT_BL_Card[p_card].currentSCCB;
+
+ if (currSCCB->Sccb_scsistat == DATA_IN_ST) {
+
+ while ((!(RD_HARPOON(port + hp_xferstat) & FIFO_EMPTY)) &&
+ (RD_HARPOON(port + hp_ext_status) & BM_CMD_BUSY)) {
+ }
+
+ if (!(RD_HARPOON(port + hp_xferstat) & FIFO_EMPTY)) {
+ currSCCB->Sccb_ATC += currSCCB->Sccb_XferCnt;
+
+ currSCCB->Sccb_XferCnt = 0;
+
+ if ((RDW_HARPOON((port + hp_intstat)) & PARITY) &&
+ (currSCCB->HostStatus == SCCB_COMPLETE)) {
+ currSCCB->HostStatus = SCCB_PARITY_ERR;
+ WRW_HARPOON((port + hp_intstat), PARITY);
+ }
+
+ FPT_hostDataXferAbort(port, p_card, currSCCB);
+
+ FPT_dataXferProcessor(port, &FPT_BL_Card[p_card]);
+
+ while ((!(RD_HARPOON(port + hp_xferstat) & FIFO_EMPTY))
+ && (RD_HARPOON(port + hp_ext_status) &
+ BM_CMD_BUSY)) {
+ }
+
+ }
+ }
+
+ /*End Data In specific code. */
+ GET_XFER_CNT(port, xfercnt);
+
+ WR_HARPOON(port + hp_xfercnt_0, 0x00);
+
+ WR_HARPOON(port + hp_portctrl_0, 0x00);
+
+ currSCCB->Sccb_ATC += (currSCCB->Sccb_XferCnt - xfercnt);
+
+ currSCCB->Sccb_XferCnt = xfercnt;
+
+ if ((RDW_HARPOON((port + hp_intstat)) & PARITY) &&
+ (currSCCB->HostStatus == SCCB_COMPLETE)) {
+
+ currSCCB->HostStatus = SCCB_PARITY_ERR;
+ WRW_HARPOON((port + hp_intstat), PARITY);
+ }
+
+ FPT_hostDataXferAbort(port, p_card, currSCCB);
+
+ WR_HARPOON(port + hp_fifowrite, 0x00);
+ WR_HARPOON(port + hp_fiforead, 0x00);
+ WR_HARPOON(port + hp_xferstat, 0x00);
+
+ WRW_HARPOON((port + hp_intstat), XFER_CNT_0);
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: Phase Bus Free
+ *
+ * Description: We just went bus free so figure out if it was
+ * because of command complete or from a disconnect.
+ *
+ *---------------------------------------------------------------------*/
+static void FPT_phaseBusFree(u32 port, unsigned char p_card)
+{
+ struct sccb *currSCCB;
+
+ currSCCB = FPT_BL_Card[p_card].currentSCCB;
+
+ if (currSCCB != NULL) {
+
+ DISABLE_AUTO(port);
+
+ if (currSCCB->OperationCode == RESET_COMMAND) {
+
+ if ((FPT_BL_Card[p_card].globalFlags & F_CONLUN_IO) &&
+ ((FPT_sccbMgrTbl[p_card][currSCCB->TargID].
+ TarStatus & TAR_TAG_Q_MASK) != TAG_Q_TRYING))
+ FPT_sccbMgrTbl[p_card][currSCCB->TargID].
+ TarLUNBusy[currSCCB->Lun] = 0;
+ else
+ FPT_sccbMgrTbl[p_card][currSCCB->TargID].
+ TarLUNBusy[0] = 0;
+
+ FPT_queueCmdComplete(&FPT_BL_Card[p_card], currSCCB,
+ p_card);
+
+ FPT_queueSearchSelect(&FPT_BL_Card[p_card], p_card);
+
+ }
+
+ else if (currSCCB->Sccb_scsistat == SELECT_SN_ST) {
+ FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarStatus |=
+ (unsigned char)SYNC_SUPPORTED;
+ FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarEEValue &=
+ ~EE_SYNC_MASK;
+ }
+
+ else if (currSCCB->Sccb_scsistat == SELECT_WN_ST) {
+ FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarStatus =
+ (FPT_sccbMgrTbl[p_card][currSCCB->TargID].
+ TarStatus & ~WIDE_ENABLED) | WIDE_NEGOCIATED;
+
+ FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarEEValue &=
+ ~EE_WIDE_SCSI;
+ }
+
+ else if (currSCCB->Sccb_scsistat == SELECT_Q_ST) {
+ /* Make sure this is not a phony BUS_FREE. If we were
+ reselected or if BUSY is NOT on then this is a
+ valid BUS FREE. SRR Wednesday, 5/10/1995. */
+
+ if ((!(RD_HARPOON(port + hp_scsisig) & SCSI_BSY)) ||
+ (RDW_HARPOON((port + hp_intstat)) & RSEL)) {
+ FPT_sccbMgrTbl[p_card][currSCCB->TargID].
+ TarStatus &= ~TAR_TAG_Q_MASK;
+ FPT_sccbMgrTbl[p_card][currSCCB->TargID].
+ TarStatus |= TAG_Q_REJECT;
+ }
+
+ else {
+ return;
+ }
+ }
+
+ else {
+
+ currSCCB->Sccb_scsistat = BUS_FREE_ST;
+
+ if (!currSCCB->HostStatus) {
+ currSCCB->HostStatus = SCCB_PHASE_SEQUENCE_FAIL;
+ }
+
+ if ((FPT_BL_Card[p_card].globalFlags & F_CONLUN_IO) &&
+ ((FPT_sccbMgrTbl[p_card][currSCCB->TargID].
+ TarStatus & TAR_TAG_Q_MASK) != TAG_Q_TRYING))
+ FPT_sccbMgrTbl[p_card][currSCCB->TargID].
+ TarLUNBusy[currSCCB->Lun] = 0;
+ else
+ FPT_sccbMgrTbl[p_card][currSCCB->TargID].
+ TarLUNBusy[0] = 0;
+
+ FPT_queueCmdComplete(&FPT_BL_Card[p_card], currSCCB,
+ p_card);
+ return;
+ }
+
+ FPT_BL_Card[p_card].globalFlags |= F_NEW_SCCB_CMD;
+
+ } /*end if !=null */
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: Auto Load Default Map
+ *
+ * Description: Load the Automation RAM with the default map values.
+ *
+ *---------------------------------------------------------------------*/
+static void FPT_autoLoadDefaultMap(u32 p_port)
+{
+ u32 map_addr;
+
+ ARAM_ACCESS(p_port);
+ map_addr = p_port + hp_aramBase;
+
+ WRW_HARPOON(map_addr, (MPM_OP + AMSG_OUT + 0xC0)); /*ID MESSAGE */
+ map_addr += 2;
+ WRW_HARPOON(map_addr, (MPM_OP + AMSG_OUT + 0x20)); /*SIMPLE TAG QUEUEING MSG */
+ map_addr += 2;
+ WRW_HARPOON(map_addr, RAT_OP); /*RESET ATTENTION */
+ map_addr += 2;
+ WRW_HARPOON(map_addr, (MPM_OP + AMSG_OUT + 0x00)); /*TAG ID MSG */
+ map_addr += 2;
+ WRW_HARPOON(map_addr, (MPM_OP + ACOMMAND + 0x00)); /*CDB BYTE 0 */
+ map_addr += 2;
+ WRW_HARPOON(map_addr, (MPM_OP + ACOMMAND + 0x00)); /*CDB BYTE 1 */
+ map_addr += 2;
+ WRW_HARPOON(map_addr, (MPM_OP + ACOMMAND + 0x00)); /*CDB BYTE 2 */
+ map_addr += 2;
+ WRW_HARPOON(map_addr, (MPM_OP + ACOMMAND + 0x00)); /*CDB BYTE 3 */
+ map_addr += 2;
+ WRW_HARPOON(map_addr, (MPM_OP + ACOMMAND + 0x00)); /*CDB BYTE 4 */
+ map_addr += 2;
+ WRW_HARPOON(map_addr, (MPM_OP + ACOMMAND + 0x00)); /*CDB BYTE 5 */
+ map_addr += 2;
+ WRW_HARPOON(map_addr, (MPM_OP + ACOMMAND + 0x00)); /*CDB BYTE 6 */
+ map_addr += 2;
+ WRW_HARPOON(map_addr, (MPM_OP + ACOMMAND + 0x00)); /*CDB BYTE 7 */
+ map_addr += 2;
+ WRW_HARPOON(map_addr, (MPM_OP + ACOMMAND + 0x00)); /*CDB BYTE 8 */
+ map_addr += 2;
+ WRW_HARPOON(map_addr, (MPM_OP + ACOMMAND + 0x00)); /*CDB BYTE 9 */
+ map_addr += 2;
+ WRW_HARPOON(map_addr, (MPM_OP + ACOMMAND + 0x00)); /*CDB BYTE 10 */
+ map_addr += 2;
+ WRW_HARPOON(map_addr, (MPM_OP + ACOMMAND + 0x00)); /*CDB BYTE 11 */
+ map_addr += 2;
+ WRW_HARPOON(map_addr, (CPE_OP + ADATA_OUT + DINT)); /*JUMP IF DATA OUT */
+ map_addr += 2;
+ WRW_HARPOON(map_addr, (TCB_OP + FIFO_0 + DI)); /*JUMP IF NO DATA IN FIFO */
+ map_addr += 2; /*This means AYNC DATA IN */
+ WRW_HARPOON(map_addr, (SSI_OP + SSI_IDO_STRT)); /*STOP AND INTERRUPT */
+ map_addr += 2;
+ WRW_HARPOON(map_addr, (CPE_OP + ADATA_IN + DINT)); /*JUMP IF NOT DATA IN PHZ */
+ map_addr += 2;
+ WRW_HARPOON(map_addr, (CPN_OP + AMSG_IN + ST)); /*IF NOT MSG IN CHECK 4 DATA IN */
+ map_addr += 2;
+ WRW_HARPOON(map_addr, (CRD_OP + SDATA + 0x02)); /*SAVE DATA PTR MSG? */
+ map_addr += 2;
+ WRW_HARPOON(map_addr, (BRH_OP + NOT_EQ + DC)); /*GO CHECK FOR DISCONNECT MSG */
+ map_addr += 2;
+ WRW_HARPOON(map_addr, (MRR_OP + SDATA + D_AR1)); /*SAVE DATA PTRS MSG */
+ map_addr += 2;
+ WRW_HARPOON(map_addr, (CPN_OP + AMSG_IN + ST)); /*IF NOT MSG IN CHECK DATA IN */
+ map_addr += 2;
+ WRW_HARPOON(map_addr, (CRD_OP + SDATA + 0x04)); /*DISCONNECT MSG? */
+ map_addr += 2;
+ WRW_HARPOON(map_addr, (BRH_OP + NOT_EQ + UNKNWN)); /*UKNKNOWN MSG */
+ map_addr += 2;
+ WRW_HARPOON(map_addr, (MRR_OP + SDATA + D_BUCKET)); /*XFER DISCONNECT MSG */
+ map_addr += 2;
+ WRW_HARPOON(map_addr, (SSI_OP + SSI_ITAR_DISC)); /*STOP AND INTERRUPT */
+ map_addr += 2;
+ WRW_HARPOON(map_addr, (CPN_OP + ASTATUS + UNKNWN)); /*JUMP IF NOT STATUS PHZ. */
+ map_addr += 2;
+ WRW_HARPOON(map_addr, (MRR_OP + SDATA + D_AR0)); /*GET STATUS BYTE */
+ map_addr += 2;
+ WRW_HARPOON(map_addr, (CPN_OP + AMSG_IN + CC)); /*ERROR IF NOT MSG IN PHZ */
+ map_addr += 2;
+ WRW_HARPOON(map_addr, (CRD_OP + SDATA + 0x00)); /*CHECK FOR CMD COMPLETE MSG. */
+ map_addr += 2;
+ WRW_HARPOON(map_addr, (BRH_OP + NOT_EQ + CC)); /*ERROR IF NOT CMD COMPLETE MSG. */
+ map_addr += 2;
+ WRW_HARPOON(map_addr, (MRR_OP + SDATA + D_BUCKET)); /*GET CMD COMPLETE MSG */
+ map_addr += 2;
+ WRW_HARPOON(map_addr, (SSI_OP + SSI_ICMD_COMP)); /*END OF COMMAND */
+ map_addr += 2;
+
+ WRW_HARPOON(map_addr, (SSI_OP + SSI_IUNKWN)); /*RECEIVED UNKNOWN MSG BYTE */
+ map_addr += 2;
+ WRW_HARPOON(map_addr, (SSI_OP + SSI_INO_CC)); /*NO COMMAND COMPLETE AFTER STATUS */
+ map_addr += 2;
+ WRW_HARPOON(map_addr, (SSI_OP + SSI_ITICKLE)); /*BIOS Tickled the Mgr */
+ map_addr += 2;
+ WRW_HARPOON(map_addr, (SSI_OP + SSI_IRFAIL)); /*EXPECTED ID/TAG MESSAGES AND */
+ map_addr += 2; /* DIDN'T GET ONE */
+ WRW_HARPOON(map_addr, (CRR_OP + AR3 + S_IDREG)); /* comp SCSI SEL ID & AR3 */
+ map_addr += 2;
+ WRW_HARPOON(map_addr, (BRH_OP + EQUAL + 0x00)); /*SEL ID OK then Conti. */
+ map_addr += 2;
+ WRW_HARPOON(map_addr, (SSI_OP + SSI_INO_CC)); /*NO COMMAND COMPLETE AFTER STATUS */
+
+ SGRAM_ACCESS(p_port);
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: Auto Command Complete
+ *
+ * Description: Post command back to host and find another command
+ * to execute.
+ *
+ *---------------------------------------------------------------------*/
+
+static void FPT_autoCmdCmplt(u32 p_port, unsigned char p_card)
+{
+ struct sccb *currSCCB;
+ unsigned char status_byte;
+
+ currSCCB = FPT_BL_Card[p_card].currentSCCB;
+
+ status_byte = RD_HARPOON(p_port + hp_gp_reg_0);
+
+ FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarLUN_CA = 0;
+
+ if (status_byte != SAM_STAT_GOOD) {
+
+ if (status_byte == SAM_STAT_TASK_SET_FULL) {
+
+ if (((FPT_BL_Card[p_card].globalFlags & F_CONLUN_IO) &&
+ ((FPT_sccbMgrTbl[p_card][currSCCB->TargID].
+ TarStatus & TAR_TAG_Q_MASK) != TAG_Q_TRYING))) {
+ FPT_sccbMgrTbl[p_card][currSCCB->TargID].
+ TarLUNBusy[currSCCB->Lun] = 1;
+ if (FPT_BL_Card[p_card].discQCount != 0)
+ FPT_BL_Card[p_card].discQCount--;
+ FPT_BL_Card[p_card].
+ discQ_Tbl[FPT_sccbMgrTbl[p_card]
+ [currSCCB->TargID].
+ LunDiscQ_Idx[currSCCB->Lun]] =
+ NULL;
+ } else {
+ FPT_sccbMgrTbl[p_card][currSCCB->TargID].
+ TarLUNBusy[0] = 1;
+ if (currSCCB->Sccb_tag) {
+ if (FPT_BL_Card[p_card].discQCount != 0)
+ FPT_BL_Card[p_card].
+ discQCount--;
+ FPT_BL_Card[p_card].discQ_Tbl[currSCCB->
+ Sccb_tag]
+ = NULL;
+ } else {
+ if (FPT_BL_Card[p_card].discQCount != 0)
+ FPT_BL_Card[p_card].
+ discQCount--;
+ FPT_BL_Card[p_card].
+ discQ_Tbl[FPT_sccbMgrTbl[p_card]
+ [currSCCB->TargID].
+ LunDiscQ_Idx[0]] = NULL;
+ }
+ }
+
+ currSCCB->Sccb_MGRFlags |= F_STATUSLOADED;
+
+ FPT_queueSelectFail(&FPT_BL_Card[p_card], p_card);
+
+ return;
+ }
+
+ if (currSCCB->Sccb_scsistat == SELECT_SN_ST) {
+ FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarStatus |=
+ (unsigned char)SYNC_SUPPORTED;
+
+ FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarEEValue &=
+ ~EE_SYNC_MASK;
+ FPT_BL_Card[p_card].globalFlags |= F_NEW_SCCB_CMD;
+
+ if (((FPT_BL_Card[p_card].globalFlags & F_CONLUN_IO) &&
+ ((FPT_sccbMgrTbl[p_card][currSCCB->TargID].
+ TarStatus & TAR_TAG_Q_MASK) != TAG_Q_TRYING))) {
+ FPT_sccbMgrTbl[p_card][currSCCB->TargID].
+ TarLUNBusy[currSCCB->Lun] = 1;
+ if (FPT_BL_Card[p_card].discQCount != 0)
+ FPT_BL_Card[p_card].discQCount--;
+ FPT_BL_Card[p_card].
+ discQ_Tbl[FPT_sccbMgrTbl[p_card]
+ [currSCCB->TargID].
+ LunDiscQ_Idx[currSCCB->Lun]] =
+ NULL;
+ } else {
+ FPT_sccbMgrTbl[p_card][currSCCB->TargID].
+ TarLUNBusy[0] = 1;
+ if (currSCCB->Sccb_tag) {
+ if (FPT_BL_Card[p_card].discQCount != 0)
+ FPT_BL_Card[p_card].
+ discQCount--;
+ FPT_BL_Card[p_card].discQ_Tbl[currSCCB->
+ Sccb_tag]
+ = NULL;
+ } else {
+ if (FPT_BL_Card[p_card].discQCount != 0)
+ FPT_BL_Card[p_card].
+ discQCount--;
+ FPT_BL_Card[p_card].
+ discQ_Tbl[FPT_sccbMgrTbl[p_card]
+ [currSCCB->TargID].
+ LunDiscQ_Idx[0]] = NULL;
+ }
+ }
+ return;
+
+ }
+
+ if (currSCCB->Sccb_scsistat == SELECT_WN_ST) {
+
+ FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarStatus =
+ (FPT_sccbMgrTbl[p_card][currSCCB->TargID].
+ TarStatus & ~WIDE_ENABLED) | WIDE_NEGOCIATED;
+
+ FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarEEValue &=
+ ~EE_WIDE_SCSI;
+ FPT_BL_Card[p_card].globalFlags |= F_NEW_SCCB_CMD;
+
+ if (((FPT_BL_Card[p_card].globalFlags & F_CONLUN_IO) &&
+ ((FPT_sccbMgrTbl[p_card][currSCCB->TargID].
+ TarStatus & TAR_TAG_Q_MASK) != TAG_Q_TRYING))) {
+ FPT_sccbMgrTbl[p_card][currSCCB->TargID].
+ TarLUNBusy[currSCCB->Lun] = 1;
+ if (FPT_BL_Card[p_card].discQCount != 0)
+ FPT_BL_Card[p_card].discQCount--;
+ FPT_BL_Card[p_card].
+ discQ_Tbl[FPT_sccbMgrTbl[p_card]
+ [currSCCB->TargID].
+ LunDiscQ_Idx[currSCCB->Lun]] =
+ NULL;
+ } else {
+ FPT_sccbMgrTbl[p_card][currSCCB->TargID].
+ TarLUNBusy[0] = 1;
+ if (currSCCB->Sccb_tag) {
+ if (FPT_BL_Card[p_card].discQCount != 0)
+ FPT_BL_Card[p_card].
+ discQCount--;
+ FPT_BL_Card[p_card].discQ_Tbl[currSCCB->
+ Sccb_tag]
+ = NULL;
+ } else {
+ if (FPT_BL_Card[p_card].discQCount != 0)
+ FPT_BL_Card[p_card].
+ discQCount--;
+ FPT_BL_Card[p_card].
+ discQ_Tbl[FPT_sccbMgrTbl[p_card]
+ [currSCCB->TargID].
+ LunDiscQ_Idx[0]] = NULL;
+ }
+ }
+ return;
+
+ }
+
+ if (status_byte == SAM_STAT_CHECK_CONDITION) {
+ if (FPT_BL_Card[p_card].globalFlags & F_DO_RENEGO) {
+ if (FPT_sccbMgrTbl[p_card][currSCCB->TargID].
+ TarEEValue & EE_SYNC_MASK) {
+ FPT_sccbMgrTbl[p_card][currSCCB->
+ TargID].
+ TarStatus &= ~TAR_SYNC_MASK;
+ }
+ if (FPT_sccbMgrTbl[p_card][currSCCB->TargID].
+ TarEEValue & EE_WIDE_SCSI) {
+ FPT_sccbMgrTbl[p_card][currSCCB->
+ TargID].
+ TarStatus &= ~TAR_WIDE_MASK;
+ }
+ }
+ }
+
+ if (!(currSCCB->Sccb_XferState & F_AUTO_SENSE)) {
+
+ currSCCB->SccbStatus = SCCB_ERROR;
+ currSCCB->TargetStatus = status_byte;
+
+ if (status_byte == SAM_STAT_CHECK_CONDITION) {
+
+ FPT_sccbMgrTbl[p_card][currSCCB->TargID].
+ TarLUN_CA = 1;
+
+ if (currSCCB->RequestSenseLength !=
+ NO_AUTO_REQUEST_SENSE) {
+
+ if (currSCCB->RequestSenseLength == 0)
+ currSCCB->RequestSenseLength =
+ 14;
+
+ FPT_ssenss(&FPT_BL_Card[p_card]);
+ FPT_BL_Card[p_card].globalFlags |=
+ F_NEW_SCCB_CMD;
+
+ if (((FPT_BL_Card[p_card].
+ globalFlags & F_CONLUN_IO)
+ &&
+ ((FPT_sccbMgrTbl[p_card]
+ [currSCCB->TargID].
+ TarStatus & TAR_TAG_Q_MASK) !=
+ TAG_Q_TRYING))) {
+ FPT_sccbMgrTbl[p_card]
+ [currSCCB->TargID].
+ TarLUNBusy[currSCCB->Lun] =
+ 1;
+ if (FPT_BL_Card[p_card].
+ discQCount != 0)
+ FPT_BL_Card[p_card].
+ discQCount--;
+ FPT_BL_Card[p_card].
+ discQ_Tbl[FPT_sccbMgrTbl
+ [p_card]
+ [currSCCB->
+ TargID].
+ LunDiscQ_Idx
+ [currSCCB->Lun]] =
+ NULL;
+ } else {
+ FPT_sccbMgrTbl[p_card]
+ [currSCCB->TargID].
+ TarLUNBusy[0] = 1;
+ if (currSCCB->Sccb_tag) {
+ if (FPT_BL_Card[p_card].
+ discQCount != 0)
+ FPT_BL_Card
+ [p_card].
+ discQCount--;
+ FPT_BL_Card[p_card].
+ discQ_Tbl[currSCCB->
+ Sccb_tag]
+ = NULL;
+ } else {
+ if (FPT_BL_Card[p_card].
+ discQCount != 0)
+ FPT_BL_Card
+ [p_card].
+ discQCount--;
+ FPT_BL_Card[p_card].
+ discQ_Tbl
+ [FPT_sccbMgrTbl
+ [p_card][currSCCB->
+ TargID].
+ LunDiscQ_Idx[0]] =
+ NULL;
+ }
+ }
+ return;
+ }
+ }
+ }
+ }
+
+ if ((FPT_BL_Card[p_card].globalFlags & F_CONLUN_IO) &&
+ ((FPT_sccbMgrTbl[p_card][currSCCB->TargID].
+ TarStatus & TAR_TAG_Q_MASK) != TAG_Q_TRYING))
+ FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarLUNBusy[currSCCB->
+ Lun] = 0;
+ else
+ FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarLUNBusy[0] = 0;
+
+ FPT_queueCmdComplete(&FPT_BL_Card[p_card], currSCCB, p_card);
+}
+
+#define SHORT_WAIT 0x0000000F
+#define LONG_WAIT 0x0000FFFFL
+
+/*---------------------------------------------------------------------
+ *
+ * Function: Data Transfer Processor
+ *
+ * Description: This routine performs two tasks.
+ * (1) Start data transfer by calling HOST_DATA_XFER_START
+ * function. Once data transfer is started, (2) Depends
+ * on the type of data transfer mode Scatter/Gather mode
+ * or NON Scatter/Gather mode. In NON Scatter/Gather mode,
+ * this routine checks Sccb_MGRFlag (F_HOST_XFER_ACT bit) for
+ * data transfer done. In Scatter/Gather mode, this routine
+ * checks bus master command complete and dual rank busy
+ * bit to keep chaining SC transfer command. Similarly,
+ * in Scatter/Gather mode, it checks Sccb_MGRFlag
+ * (F_HOST_XFER_ACT bit) for data transfer done.
+ *
+ *---------------------------------------------------------------------*/
+
+static void FPT_dataXferProcessor(u32 port, struct sccb_card *pCurrCard)
+{
+ struct sccb *currSCCB;
+
+ currSCCB = pCurrCard->currentSCCB;
+
+ if (currSCCB->Sccb_XferState & F_SG_XFER) {
+ if (pCurrCard->globalFlags & F_HOST_XFER_ACT)
+ {
+ currSCCB->Sccb_sgseg += (unsigned char)SG_BUF_CNT;
+ currSCCB->Sccb_SGoffset = 0x00;
+ }
+ pCurrCard->globalFlags |= F_HOST_XFER_ACT;
+
+ FPT_busMstrSGDataXferStart(port, currSCCB);
+ }
+
+ else {
+ if (!(pCurrCard->globalFlags & F_HOST_XFER_ACT)) {
+ pCurrCard->globalFlags |= F_HOST_XFER_ACT;
+
+ FPT_busMstrDataXferStart(port, currSCCB);
+ }
+ }
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: BusMaster Scatter Gather Data Transfer Start
+ *
+ * Description:
+ *
+ *---------------------------------------------------------------------*/
+static void FPT_busMstrSGDataXferStart(u32 p_port, struct sccb *pcurrSCCB)
+{
+ u32 count, addr, tmpSGCnt;
+ unsigned int sg_index;
+ unsigned char sg_count, i;
+ u32 reg_offset;
+ struct blogic_sg_seg *segp;
+
+ if (pcurrSCCB->Sccb_XferState & F_HOST_XFER_DIR)
+ count = ((u32)HOST_RD_CMD) << 24;
+ else
+ count = ((u32)HOST_WRT_CMD) << 24;
+
+ sg_count = 0;
+ tmpSGCnt = 0;
+ sg_index = pcurrSCCB->Sccb_sgseg;
+ reg_offset = hp_aramBase;
+
+ i = (unsigned char)(RD_HARPOON(p_port + hp_page_ctrl) &
+ ~(SGRAM_ARAM | SCATTER_EN));
+
+ WR_HARPOON(p_port + hp_page_ctrl, i);
+
+ while ((sg_count < (unsigned char)SG_BUF_CNT) &&
+ ((sg_index * (unsigned int)SG_ELEMENT_SIZE) <
+ pcurrSCCB->DataLength)) {
+
+ segp = (struct blogic_sg_seg *)(pcurrSCCB->DataPointer) +
+ sg_index;
+ tmpSGCnt += segp->segbytes;
+ count |= segp->segbytes;
+ addr = segp->segdata;
+
+ if ((!sg_count) && (pcurrSCCB->Sccb_SGoffset)) {
+ addr +=
+ ((count & 0x00FFFFFFL) - pcurrSCCB->Sccb_SGoffset);
+ count =
+ (count & 0xFF000000L) | pcurrSCCB->Sccb_SGoffset;
+ tmpSGCnt = count & 0x00FFFFFFL;
+ }
+
+ WR_HARP32(p_port, reg_offset, addr);
+ reg_offset += 4;
+
+ WR_HARP32(p_port, reg_offset, count);
+ reg_offset += 4;
+
+ count &= 0xFF000000L;
+ sg_index++;
+ sg_count++;
+
+ } /*End While */
+
+ pcurrSCCB->Sccb_XferCnt = tmpSGCnt;
+
+ WR_HARPOON(p_port + hp_sg_addr, (sg_count << 4));
+
+ if (pcurrSCCB->Sccb_XferState & F_HOST_XFER_DIR) {
+
+ WR_HARP32(p_port, hp_xfercnt_0, tmpSGCnt);
+
+ WR_HARPOON(p_port + hp_portctrl_0,
+ (DMA_PORT | SCSI_PORT | SCSI_INBIT));
+ WR_HARPOON(p_port + hp_scsisig, S_DATAI_PH);
+ }
+
+ else {
+
+ if ((!(RD_HARPOON(p_port + hp_synctarg_0) & NARROW_SCSI)) &&
+ (tmpSGCnt & 0x000000001)) {
+
+ pcurrSCCB->Sccb_XferState |= F_ODD_BALL_CNT;
+ tmpSGCnt--;
+ }
+
+ WR_HARP32(p_port, hp_xfercnt_0, tmpSGCnt);
+
+ WR_HARPOON(p_port + hp_portctrl_0,
+ (SCSI_PORT | DMA_PORT | DMA_RD));
+ WR_HARPOON(p_port + hp_scsisig, S_DATAO_PH);
+ }
+
+ WR_HARPOON(p_port + hp_page_ctrl, (unsigned char)(i | SCATTER_EN));
+
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: BusMaster Data Transfer Start
+ *
+ * Description:
+ *
+ *---------------------------------------------------------------------*/
+static void FPT_busMstrDataXferStart(u32 p_port, struct sccb *pcurrSCCB)
+{
+ u32 addr, count;
+
+ if (!(pcurrSCCB->Sccb_XferState & F_AUTO_SENSE)) {
+
+ count = pcurrSCCB->Sccb_XferCnt;
+
+ addr = (u32)(unsigned long)pcurrSCCB->DataPointer + pcurrSCCB->Sccb_ATC;
+ }
+
+ else {
+ addr = pcurrSCCB->SensePointer;
+ count = pcurrSCCB->RequestSenseLength;
+
+ }
+
+ HP_SETUP_ADDR_CNT(p_port, addr, count);
+
+ if (pcurrSCCB->Sccb_XferState & F_HOST_XFER_DIR) {
+
+ WR_HARPOON(p_port + hp_portctrl_0,
+ (DMA_PORT | SCSI_PORT | SCSI_INBIT));
+ WR_HARPOON(p_port + hp_scsisig, S_DATAI_PH);
+
+ WR_HARPOON(p_port + hp_xfer_cmd,
+ (XFER_DMA_HOST | XFER_HOST_AUTO | XFER_DMA_8BIT));
+ }
+
+ else {
+
+ WR_HARPOON(p_port + hp_portctrl_0,
+ (SCSI_PORT | DMA_PORT | DMA_RD));
+ WR_HARPOON(p_port + hp_scsisig, S_DATAO_PH);
+
+ WR_HARPOON(p_port + hp_xfer_cmd,
+ (XFER_HOST_DMA | XFER_HOST_AUTO | XFER_DMA_8BIT));
+
+ }
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: BusMaster Timeout Handler
+ *
+ * Description: This function is called after a bus master command busy time
+ * out is detected. This routines issue halt state machine
+ * with a software time out for command busy. If command busy
+ * is still asserted at the end of the time out, it issues
+ * hard abort with another software time out. It hard abort
+ * command busy is also time out, it'll just give up.
+ *
+ *---------------------------------------------------------------------*/
+static unsigned char FPT_busMstrTimeOut(u32 p_port)
+{
+ unsigned long timeout;
+
+ timeout = LONG_WAIT;
+
+ WR_HARPOON(p_port + hp_sys_ctrl, HALT_MACH);
+
+ while ((!(RD_HARPOON(p_port + hp_ext_status) & CMD_ABORTED))
+ && timeout--) {
+ }
+
+ if (RD_HARPOON(p_port + hp_ext_status) & BM_CMD_BUSY) {
+ WR_HARPOON(p_port + hp_sys_ctrl, HARD_ABORT);
+
+ timeout = LONG_WAIT;
+ while ((RD_HARPOON(p_port + hp_ext_status) & BM_CMD_BUSY)
+ && timeout--) {
+ }
+ }
+
+ RD_HARPOON(p_port + hp_int_status); /*Clear command complete */
+
+ if (RD_HARPOON(p_port + hp_ext_status) & BM_CMD_BUSY) {
+ return 1;
+ }
+
+ else {
+ return 0;
+ }
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: Host Data Transfer Abort
+ *
+ * Description: Abort any in progress transfer.
+ *
+ *---------------------------------------------------------------------*/
+static void FPT_hostDataXferAbort(u32 port, unsigned char p_card,
+ struct sccb *pCurrSCCB)
+{
+
+ unsigned long timeout;
+ unsigned long remain_cnt;
+ u32 sg_ptr;
+ struct blogic_sg_seg *segp;
+
+ FPT_BL_Card[p_card].globalFlags &= ~F_HOST_XFER_ACT;
+
+ if (pCurrSCCB->Sccb_XferState & F_AUTO_SENSE) {
+
+ if (!(RD_HARPOON(port + hp_int_status) & INT_CMD_COMPL)) {
+
+ WR_HARPOON(port + hp_bm_ctrl,
+ (RD_HARPOON(port + hp_bm_ctrl) |
+ FLUSH_XFER_CNTR));
+ timeout = LONG_WAIT;
+
+ while ((RD_HARPOON(port + hp_ext_status) & BM_CMD_BUSY)
+ && timeout--) {
+ }
+
+ WR_HARPOON(port + hp_bm_ctrl,
+ (RD_HARPOON(port + hp_bm_ctrl) &
+ ~FLUSH_XFER_CNTR));
+
+ if (RD_HARPOON(port + hp_ext_status) & BM_CMD_BUSY) {
+
+ if (FPT_busMstrTimeOut(port)) {
+
+ if (pCurrSCCB->HostStatus == 0x00)
+
+ pCurrSCCB->HostStatus =
+ SCCB_BM_ERR;
+
+ }
+
+ if (RD_HARPOON(port + hp_int_status) &
+ INT_EXT_STATUS)
+
+ if (RD_HARPOON(port + hp_ext_status) &
+ BAD_EXT_STATUS)
+
+ if (pCurrSCCB->HostStatus ==
+ 0x00)
+ {
+ pCurrSCCB->HostStatus =
+ SCCB_BM_ERR;
+ }
+ }
+ }
+ }
+
+ else if (pCurrSCCB->Sccb_XferCnt) {
+
+ if (pCurrSCCB->Sccb_XferState & F_SG_XFER) {
+
+ WR_HARPOON(port + hp_page_ctrl,
+ (RD_HARPOON(port + hp_page_ctrl) &
+ ~SCATTER_EN));
+
+ WR_HARPOON(port + hp_sg_addr, 0x00);
+
+ sg_ptr = pCurrSCCB->Sccb_sgseg + SG_BUF_CNT;
+
+ if (sg_ptr >
+ (unsigned int)(pCurrSCCB->DataLength /
+ SG_ELEMENT_SIZE)) {
+
+ sg_ptr = (u32)(pCurrSCCB->DataLength /
+ SG_ELEMENT_SIZE);
+ }
+
+ remain_cnt = pCurrSCCB->Sccb_XferCnt;
+
+ while (remain_cnt < 0x01000000L) {
+
+ sg_ptr--;
+ segp = (struct blogic_sg_seg *)(pCurrSCCB->
+ DataPointer) + (sg_ptr * 2);
+ if (remain_cnt > (unsigned long)segp->segbytes)
+ remain_cnt -=
+ (unsigned long)segp->segbytes;
+ else
+ break;
+ }
+
+ if (remain_cnt < 0x01000000L) {
+
+ pCurrSCCB->Sccb_SGoffset = remain_cnt;
+
+ pCurrSCCB->Sccb_sgseg = (unsigned short)sg_ptr;
+
+ if ((unsigned long)(sg_ptr * SG_ELEMENT_SIZE) ==
+ pCurrSCCB->DataLength && (remain_cnt == 0))
+
+ pCurrSCCB->Sccb_XferState |=
+ F_ALL_XFERRED;
+ }
+
+ else {
+
+ if (pCurrSCCB->HostStatus == 0x00) {
+
+ pCurrSCCB->HostStatus =
+ SCCB_GROSS_FW_ERR;
+ }
+ }
+ }
+
+ if (!(pCurrSCCB->Sccb_XferState & F_HOST_XFER_DIR)) {
+
+ if (RD_HARPOON(port + hp_ext_status) & BM_CMD_BUSY) {
+
+ FPT_busMstrTimeOut(port);
+ }
+
+ else {
+
+ if (RD_HARPOON(port + hp_int_status) &
+ INT_EXT_STATUS) {
+
+ if (RD_HARPOON(port + hp_ext_status) &
+ BAD_EXT_STATUS) {
+
+ if (pCurrSCCB->HostStatus ==
+ 0x00) {
+
+ pCurrSCCB->HostStatus =
+ SCCB_BM_ERR;
+ }
+ }
+ }
+
+ }
+ }
+
+ else {
+
+ if ((RD_HARPOON(port + hp_fifo_cnt)) >= BM_THRESHOLD) {
+
+ timeout = SHORT_WAIT;
+
+ while ((RD_HARPOON(port + hp_ext_status) &
+ BM_CMD_BUSY)
+ && ((RD_HARPOON(port + hp_fifo_cnt)) >=
+ BM_THRESHOLD) && timeout--) {
+ }
+ }
+
+ if (RD_HARPOON(port + hp_ext_status) & BM_CMD_BUSY) {
+
+ WR_HARPOON(port + hp_bm_ctrl,
+ (RD_HARPOON(port + hp_bm_ctrl) |
+ FLUSH_XFER_CNTR));
+
+ timeout = LONG_WAIT;
+
+ while ((RD_HARPOON(port + hp_ext_status) &
+ BM_CMD_BUSY) && timeout--) {
+ }
+
+ WR_HARPOON(port + hp_bm_ctrl,
+ (RD_HARPOON(port + hp_bm_ctrl) &
+ ~FLUSH_XFER_CNTR));
+
+ if (RD_HARPOON(port + hp_ext_status) &
+ BM_CMD_BUSY) {
+
+ if (pCurrSCCB->HostStatus == 0x00) {
+
+ pCurrSCCB->HostStatus =
+ SCCB_BM_ERR;
+ }
+
+ FPT_busMstrTimeOut(port);
+ }
+ }
+
+ if (RD_HARPOON(port + hp_int_status) & INT_EXT_STATUS) {
+
+ if (RD_HARPOON(port + hp_ext_status) &
+ BAD_EXT_STATUS) {
+
+ if (pCurrSCCB->HostStatus == 0x00) {
+
+ pCurrSCCB->HostStatus =
+ SCCB_BM_ERR;
+ }
+ }
+ }
+ }
+
+ }
+
+ else {
+
+ if (RD_HARPOON(port + hp_ext_status) & BM_CMD_BUSY) {
+
+ timeout = LONG_WAIT;
+
+ while ((RD_HARPOON(port + hp_ext_status) & BM_CMD_BUSY)
+ && timeout--) {
+ }
+
+ if (RD_HARPOON(port + hp_ext_status) & BM_CMD_BUSY) {
+
+ if (pCurrSCCB->HostStatus == 0x00) {
+
+ pCurrSCCB->HostStatus = SCCB_BM_ERR;
+ }
+
+ FPT_busMstrTimeOut(port);
+ }
+ }
+
+ if (RD_HARPOON(port + hp_int_status) & INT_EXT_STATUS) {
+
+ if (RD_HARPOON(port + hp_ext_status) & BAD_EXT_STATUS) {
+
+ if (pCurrSCCB->HostStatus == 0x00) {
+
+ pCurrSCCB->HostStatus = SCCB_BM_ERR;
+ }
+ }
+
+ }
+
+ if (pCurrSCCB->Sccb_XferState & F_SG_XFER) {
+
+ WR_HARPOON(port + hp_page_ctrl,
+ (RD_HARPOON(port + hp_page_ctrl) &
+ ~SCATTER_EN));
+
+ WR_HARPOON(port + hp_sg_addr, 0x00);
+
+ pCurrSCCB->Sccb_sgseg += SG_BUF_CNT;
+
+ pCurrSCCB->Sccb_SGoffset = 0x00;
+
+ if ((u32)(pCurrSCCB->Sccb_sgseg * SG_ELEMENT_SIZE) >=
+ pCurrSCCB->DataLength) {
+
+ pCurrSCCB->Sccb_XferState |= F_ALL_XFERRED;
+ pCurrSCCB->Sccb_sgseg =
+ (unsigned short)(pCurrSCCB->DataLength /
+ SG_ELEMENT_SIZE);
+ }
+ }
+
+ else {
+ if (!(pCurrSCCB->Sccb_XferState & F_AUTO_SENSE))
+ pCurrSCCB->Sccb_XferState |= F_ALL_XFERRED;
+ }
+ }
+
+ WR_HARPOON(port + hp_int_mask, (INT_CMD_COMPL | SCSI_INTERRUPT));
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: Host Data Transfer Restart
+ *
+ * Description: Reset the available count due to a restore data
+ * pointers message.
+ *
+ *---------------------------------------------------------------------*/
+static void FPT_hostDataXferRestart(struct sccb *currSCCB)
+{
+ unsigned long data_count;
+ unsigned int sg_index;
+ struct blogic_sg_seg *segp;
+
+ if (currSCCB->Sccb_XferState & F_SG_XFER) {
+
+ currSCCB->Sccb_XferCnt = 0;
+
+ sg_index = 0xffff; /*Index by long words into sg list. */
+ data_count = 0; /*Running count of SG xfer counts. */
+
+
+ while (data_count < currSCCB->Sccb_ATC) {
+
+ sg_index++;
+ segp = (struct blogic_sg_seg *)(currSCCB->DataPointer) +
+ (sg_index * 2);
+ data_count += segp->segbytes;
+ }
+
+ if (data_count == currSCCB->Sccb_ATC) {
+
+ currSCCB->Sccb_SGoffset = 0;
+ sg_index++;
+ }
+
+ else {
+ currSCCB->Sccb_SGoffset =
+ data_count - currSCCB->Sccb_ATC;
+ }
+
+ currSCCB->Sccb_sgseg = (unsigned short)sg_index;
+ }
+
+ else {
+ currSCCB->Sccb_XferCnt =
+ currSCCB->DataLength - currSCCB->Sccb_ATC;
+ }
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: FPT_scini
+ *
+ * Description: Setup all data structures necessary for SCAM selection.
+ *
+ *---------------------------------------------------------------------*/
+
+static void FPT_scini(unsigned char p_card, unsigned char p_our_id,
+ unsigned char p_power_up)
+{
+
+ unsigned char loser, assigned_id;
+ u32 p_port;
+
+ unsigned char i, k, ScamFlg;
+ struct sccb_card *currCard;
+ struct nvram_info *pCurrNvRam;
+
+ currCard = &FPT_BL_Card[p_card];
+ p_port = currCard->ioPort;
+ pCurrNvRam = currCard->pNvRamInfo;
+
+ if (pCurrNvRam) {
+ ScamFlg = pCurrNvRam->niScamConf;
+ i = pCurrNvRam->niSysConf;
+ } else {
+ ScamFlg =
+ (unsigned char)FPT_utilEERead(p_port, SCAM_CONFIG / 2);
+ i = (unsigned
+ char)(FPT_utilEERead(p_port, (SYSTEM_CONFIG / 2)));
+ }
+ if (!(i & 0x02)) /* check if reset bus in AutoSCSI parameter set */
+ return;
+
+ FPT_inisci(p_card, p_port, p_our_id);
+
+ /* Force to wait 1 sec after SCSI bus reset. Some SCAM device FW
+ too slow to return to SCAM selection */
+
+ /* if (p_power_up)
+ FPT_Wait1Second(p_port);
+ else
+ FPT_Wait(p_port, TO_250ms); */
+
+ FPT_Wait1Second(p_port);
+
+ if ((ScamFlg & SCAM_ENABLED) && (ScamFlg & SCAM_LEVEL2)) {
+ while (!(FPT_scarb(p_port, INIT_SELTD))) {
+ }
+
+ FPT_scsel(p_port);
+
+ do {
+ FPT_scxferc(p_port, SYNC_PTRN);
+ FPT_scxferc(p_port, DOM_MSTR);
+ loser =
+ FPT_scsendi(p_port,
+ &FPT_scamInfo[p_our_id].id_string[0]);
+ } while (loser == 0xFF);
+
+ FPT_scbusf(p_port);
+
+ if ((p_power_up) && (!loser)) {
+ FPT_sresb(p_port, p_card);
+ FPT_Wait(p_port, TO_250ms);
+
+ while (!(FPT_scarb(p_port, INIT_SELTD))) {
+ }
+
+ FPT_scsel(p_port);
+
+ do {
+ FPT_scxferc(p_port, SYNC_PTRN);
+ FPT_scxferc(p_port, DOM_MSTR);
+ loser =
+ FPT_scsendi(p_port,
+ &FPT_scamInfo[p_our_id].
+ id_string[0]);
+ } while (loser == 0xFF);
+
+ FPT_scbusf(p_port);
+ }
+ }
+
+ else {
+ loser = 0;
+ }
+
+ if (!loser) {
+
+ FPT_scamInfo[p_our_id].state = ID_ASSIGNED;
+
+ if (ScamFlg & SCAM_ENABLED) {
+
+ for (i = 0; i < MAX_SCSI_TAR; i++) {
+ if ((FPT_scamInfo[i].state == ID_UNASSIGNED) ||
+ (FPT_scamInfo[i].state == ID_UNUSED)) {
+ if (FPT_scsell(p_port, i)) {
+ FPT_scamInfo[i].state = LEGACY;
+ if ((FPT_scamInfo[i].
+ id_string[0] != 0xFF)
+ || (FPT_scamInfo[i].
+ id_string[1] != 0xFA)) {
+
+ FPT_scamInfo[i].
+ id_string[0] = 0xFF;
+ FPT_scamInfo[i].
+ id_string[1] = 0xFA;
+ if (pCurrNvRam == NULL)
+ currCard->
+ globalFlags
+ |=
+ F_UPDATE_EEPROM;
+ }
+ }
+ }
+ }
+
+ FPT_sresb(p_port, p_card);
+ FPT_Wait1Second(p_port);
+ while (!(FPT_scarb(p_port, INIT_SELTD))) {
+ }
+ FPT_scsel(p_port);
+ FPT_scasid(p_card, p_port);
+ }
+
+ }
+
+ else if ((loser) && (ScamFlg & SCAM_ENABLED)) {
+ FPT_scamInfo[p_our_id].id_string[0] = SLV_TYPE_CODE0;
+ assigned_id = 0;
+ FPT_scwtsel(p_port);
+
+ do {
+ while (FPT_scxferc(p_port, 0x00) != SYNC_PTRN) {
+ }
+
+ i = FPT_scxferc(p_port, 0x00);
+ if (i == ASSIGN_ID) {
+ if (!
+ (FPT_scsendi
+ (p_port,
+ &FPT_scamInfo[p_our_id].id_string[0]))) {
+ i = FPT_scxferc(p_port, 0x00);
+ if (FPT_scvalq(i)) {
+ k = FPT_scxferc(p_port, 0x00);
+
+ if (FPT_scvalq(k)) {
+ currCard->ourId =
+ ((unsigned char)(i
+ <<
+ 3)
+ +
+ (k &
+ (unsigned char)7))
+ & (unsigned char)
+ 0x3F;
+ FPT_inisci(p_card,
+ p_port,
+ p_our_id);
+ FPT_scamInfo[currCard->
+ ourId].
+ state = ID_ASSIGNED;
+ FPT_scamInfo[currCard->
+ ourId].
+ id_string[0]
+ = SLV_TYPE_CODE0;
+ assigned_id = 1;
+ }
+ }
+ }
+ }
+
+ else if (i == SET_P_FLAG) {
+ if (!(FPT_scsendi(p_port,
+ &FPT_scamInfo[p_our_id].
+ id_string[0])))
+ FPT_scamInfo[p_our_id].id_string[0] |=
+ 0x80;
+ }
+ } while (!assigned_id);
+
+ while (FPT_scxferc(p_port, 0x00) != CFG_CMPLT) {
+ }
+ }
+
+ if (ScamFlg & SCAM_ENABLED) {
+ FPT_scbusf(p_port);
+ if (currCard->globalFlags & F_UPDATE_EEPROM) {
+ FPT_scsavdi(p_card, p_port);
+ currCard->globalFlags &= ~F_UPDATE_EEPROM;
+ }
+ }
+
+/*
+ for (i=0,k=0; i < MAX_SCSI_TAR; i++)
+ {
+ if ((FPT_scamInfo[i].state == ID_ASSIGNED) ||
+ (FPT_scamInfo[i].state == LEGACY))
+ k++;
+ }
+
+ if (k==2)
+ currCard->globalFlags |= F_SINGLE_DEVICE;
+ else
+ currCard->globalFlags &= ~F_SINGLE_DEVICE;
+*/
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: FPT_scarb
+ *
+ * Description: Gain control of the bus and wait SCAM select time (250ms)
+ *
+ *---------------------------------------------------------------------*/
+
+static int FPT_scarb(u32 p_port, unsigned char p_sel_type)
+{
+ if (p_sel_type == INIT_SELTD) {
+
+ while (RD_HARPOON(p_port + hp_scsisig) & (SCSI_SEL | SCSI_BSY)) {
+ }
+
+ if (RD_HARPOON(p_port + hp_scsisig) & SCSI_SEL)
+ return 0;
+
+ if (RD_HARPOON(p_port + hp_scsidata_0) != 00)
+ return 0;
+
+ WR_HARPOON(p_port + hp_scsisig,
+ (RD_HARPOON(p_port + hp_scsisig) | SCSI_BSY));
+
+ if (RD_HARPOON(p_port + hp_scsisig) & SCSI_SEL) {
+
+ WR_HARPOON(p_port + hp_scsisig,
+ (RD_HARPOON(p_port + hp_scsisig) &
+ ~SCSI_BSY));
+ return 0;
+ }
+
+ WR_HARPOON(p_port + hp_scsisig,
+ (RD_HARPOON(p_port + hp_scsisig) | SCSI_SEL));
+
+ if (RD_HARPOON(p_port + hp_scsidata_0) != 00) {
+
+ WR_HARPOON(p_port + hp_scsisig,
+ (RD_HARPOON(p_port + hp_scsisig) &
+ ~(SCSI_BSY | SCSI_SEL)));
+ return 0;
+ }
+ }
+
+ WR_HARPOON(p_port + hp_clkctrl_0, (RD_HARPOON(p_port + hp_clkctrl_0)
+ & ~ACTdeassert));
+ WR_HARPOON(p_port + hp_scsireset, SCAM_EN);
+ WR_HARPOON(p_port + hp_scsidata_0, 0x00);
+ WR_HARPOON(p_port + hp_scsidata_1, 0x00);
+ WR_HARPOON(p_port + hp_portctrl_0, SCSI_BUS_EN);
+
+ WR_HARPOON(p_port + hp_scsisig,
+ (RD_HARPOON(p_port + hp_scsisig) | SCSI_MSG));
+
+ WR_HARPOON(p_port + hp_scsisig, (RD_HARPOON(p_port + hp_scsisig)
+ & ~SCSI_BSY));
+
+ FPT_Wait(p_port, TO_250ms);
+
+ return 1;
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: FPT_scbusf
+ *
+ * Description: Release the SCSI bus and disable SCAM selection.
+ *
+ *---------------------------------------------------------------------*/
+
+static void FPT_scbusf(u32 p_port)
+{
+ WR_HARPOON(p_port + hp_page_ctrl,
+ (RD_HARPOON(p_port + hp_page_ctrl) | G_INT_DISABLE));
+
+ WR_HARPOON(p_port + hp_scsidata_0, 0x00);
+
+ WR_HARPOON(p_port + hp_portctrl_0, (RD_HARPOON(p_port + hp_portctrl_0)
+ & ~SCSI_BUS_EN));
+
+ WR_HARPOON(p_port + hp_scsisig, 0x00);
+
+ WR_HARPOON(p_port + hp_scsireset, (RD_HARPOON(p_port + hp_scsireset)
+ & ~SCAM_EN));
+
+ WR_HARPOON(p_port + hp_clkctrl_0, (RD_HARPOON(p_port + hp_clkctrl_0)
+ | ACTdeassert));
+
+ WRW_HARPOON((p_port + hp_intstat), (BUS_FREE | AUTO_INT | SCAM_SEL));
+
+ WR_HARPOON(p_port + hp_page_ctrl,
+ (RD_HARPOON(p_port + hp_page_ctrl) & ~G_INT_DISABLE));
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: FPT_scasid
+ *
+ * Description: Assign an ID to all the SCAM devices.
+ *
+ *---------------------------------------------------------------------*/
+
+static void FPT_scasid(unsigned char p_card, u32 p_port)
+{
+ unsigned char temp_id_string[ID_STRING_LENGTH];
+
+ unsigned char i, k, scam_id;
+ unsigned char crcBytes[3];
+ struct nvram_info *pCurrNvRam;
+ unsigned short *pCrcBytes;
+
+ pCurrNvRam = FPT_BL_Card[p_card].pNvRamInfo;
+
+ i = 0;
+
+ while (!i) {
+
+ for (k = 0; k < ID_STRING_LENGTH; k++) {
+ temp_id_string[k] = (unsigned char)0x00;
+ }
+
+ FPT_scxferc(p_port, SYNC_PTRN);
+ FPT_scxferc(p_port, ASSIGN_ID);
+
+ if (!(FPT_sciso(p_port, &temp_id_string[0]))) {
+ if (pCurrNvRam) {
+ pCrcBytes = (unsigned short *)&crcBytes[0];
+ *pCrcBytes = FPT_CalcCrc16(&temp_id_string[0]);
+ crcBytes[2] = FPT_CalcLrc(&temp_id_string[0]);
+ temp_id_string[1] = crcBytes[2];
+ temp_id_string[2] = crcBytes[0];
+ temp_id_string[3] = crcBytes[1];
+ for (k = 4; k < ID_STRING_LENGTH; k++)
+ temp_id_string[k] = (unsigned char)0x00;
+ }
+ i = FPT_scmachid(p_card, temp_id_string);
+
+ if (i == CLR_PRIORITY) {
+ FPT_scxferc(p_port, MISC_CODE);
+ FPT_scxferc(p_port, CLR_P_FLAG);
+ i = 0; /*Not the last ID yet. */
+ }
+
+ else if (i != NO_ID_AVAIL) {
+ if (i < 8)
+ FPT_scxferc(p_port, ID_0_7);
+ else
+ FPT_scxferc(p_port, ID_8_F);
+
+ scam_id = (i & (unsigned char)0x07);
+
+ for (k = 1; k < 0x08; k <<= 1)
+ if (!(k & i))
+ scam_id += 0x08; /*Count number of zeros in DB0-3. */
+
+ FPT_scxferc(p_port, scam_id);
+
+ i = 0; /*Not the last ID yet. */
+ }
+ }
+
+ else {
+ i = 1;
+ }
+
+ } /*End while */
+
+ FPT_scxferc(p_port, SYNC_PTRN);
+ FPT_scxferc(p_port, CFG_CMPLT);
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: FPT_scsel
+ *
+ * Description: Select all the SCAM devices.
+ *
+ *---------------------------------------------------------------------*/
+
+static void FPT_scsel(u32 p_port)
+{
+
+ WR_HARPOON(p_port + hp_scsisig, SCSI_SEL);
+ FPT_scwiros(p_port, SCSI_MSG);
+
+ WR_HARPOON(p_port + hp_scsisig, (SCSI_SEL | SCSI_BSY));
+
+ WR_HARPOON(p_port + hp_scsisig,
+ (SCSI_SEL | SCSI_BSY | SCSI_IOBIT | SCSI_CD));
+ WR_HARPOON(p_port + hp_scsidata_0,
+ (unsigned char)(RD_HARPOON(p_port + hp_scsidata_0) |
+ (unsigned char)(BIT(7) + BIT(6))));
+
+ WR_HARPOON(p_port + hp_scsisig, (SCSI_BSY | SCSI_IOBIT | SCSI_CD));
+ FPT_scwiros(p_port, SCSI_SEL);
+
+ WR_HARPOON(p_port + hp_scsidata_0,
+ (unsigned char)(RD_HARPOON(p_port + hp_scsidata_0) &
+ ~(unsigned char)BIT(6)));
+ FPT_scwirod(p_port, BIT(6));
+
+ WR_HARPOON(p_port + hp_scsisig,
+ (SCSI_SEL | SCSI_BSY | SCSI_IOBIT | SCSI_CD));
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: FPT_scxferc
+ *
+ * Description: Handshake the p_data (DB4-0) across the bus.
+ *
+ *---------------------------------------------------------------------*/
+
+static unsigned char FPT_scxferc(u32 p_port, unsigned char p_data)
+{
+ unsigned char curr_data, ret_data;
+
+ curr_data = p_data | BIT(7) | BIT(5); /*Start with DB7 & DB5 asserted. */
+
+ WR_HARPOON(p_port + hp_scsidata_0, curr_data);
+
+ curr_data &= ~BIT(7);
+
+ WR_HARPOON(p_port + hp_scsidata_0, curr_data);
+
+ FPT_scwirod(p_port, BIT(7)); /*Wait for DB7 to be released. */
+ while (!(RD_HARPOON(p_port + hp_scsidata_0) & BIT(5))) ;
+
+ ret_data = (RD_HARPOON(p_port + hp_scsidata_0) & (unsigned char)0x1F);
+
+ curr_data |= BIT(6);
+
+ WR_HARPOON(p_port + hp_scsidata_0, curr_data);
+
+ curr_data &= ~BIT(5);
+
+ WR_HARPOON(p_port + hp_scsidata_0, curr_data);
+
+ FPT_scwirod(p_port, BIT(5)); /*Wait for DB5 to be released. */
+
+ curr_data &= ~(BIT(4) | BIT(3) | BIT(2) | BIT(1) | BIT(0)); /*Release data bits */
+ curr_data |= BIT(7);
+
+ WR_HARPOON(p_port + hp_scsidata_0, curr_data);
+
+ curr_data &= ~BIT(6);
+
+ WR_HARPOON(p_port + hp_scsidata_0, curr_data);
+
+ FPT_scwirod(p_port, BIT(6)); /*Wait for DB6 to be released. */
+
+ return ret_data;
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: FPT_scsendi
+ *
+ * Description: Transfer our Identification string to determine if we
+ * will be the dominant master.
+ *
+ *---------------------------------------------------------------------*/
+
+static unsigned char FPT_scsendi(u32 p_port, unsigned char p_id_string[])
+{
+ unsigned char ret_data, byte_cnt, bit_cnt, defer;
+
+ defer = 0;
+
+ for (byte_cnt = 0; byte_cnt < ID_STRING_LENGTH; byte_cnt++) {
+
+ for (bit_cnt = 0x80; bit_cnt != 0; bit_cnt >>= 1) {
+
+ if (defer)
+ ret_data = FPT_scxferc(p_port, 00);
+
+ else if (p_id_string[byte_cnt] & bit_cnt)
+
+ ret_data = FPT_scxferc(p_port, 02);
+
+ else {
+
+ ret_data = FPT_scxferc(p_port, 01);
+ if (ret_data & 02)
+ defer = 1;
+ }
+
+ if ((ret_data & 0x1C) == 0x10)
+ return 0x00; /*End of isolation stage, we won! */
+
+ if (ret_data & 0x1C)
+ return 0xFF;
+
+ if ((defer) && (!(ret_data & 0x1F)))
+ return 0x01; /*End of isolation stage, we lost. */
+
+ } /*bit loop */
+
+ } /*byte loop */
+
+ if (defer)
+ return 0x01; /*We lost */
+ else
+ return 0; /*We WON! Yeeessss! */
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: FPT_sciso
+ *
+ * Description: Transfer the Identification string.
+ *
+ *---------------------------------------------------------------------*/
+
+static unsigned char FPT_sciso(u32 p_port, unsigned char p_id_string[])
+{
+ unsigned char ret_data, the_data, byte_cnt, bit_cnt;
+
+ the_data = 0;
+
+ for (byte_cnt = 0; byte_cnt < ID_STRING_LENGTH; byte_cnt++) {
+
+ for (bit_cnt = 0; bit_cnt < 8; bit_cnt++) {
+
+ ret_data = FPT_scxferc(p_port, 0);
+
+ if (ret_data & 0xFC)
+ return 0xFF;
+
+ else {
+
+ the_data <<= 1;
+ if (ret_data & BIT(1)) {
+ the_data |= 1;
+ }
+ }
+
+ if ((ret_data & 0x1F) == 0) {
+/*
+ if(bit_cnt != 0 || bit_cnt != 8)
+ {
+ byte_cnt = 0;
+ bit_cnt = 0;
+ FPT_scxferc(p_port, SYNC_PTRN);
+ FPT_scxferc(p_port, ASSIGN_ID);
+ continue;
+ }
+*/
+ if (byte_cnt)
+ return 0x00;
+ else
+ return 0xFF;
+ }
+
+ } /*bit loop */
+
+ p_id_string[byte_cnt] = the_data;
+
+ } /*byte loop */
+
+ return 0;
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: FPT_scwirod
+ *
+ * Description: Sample the SCSI data bus making sure the signal has been
+ * deasserted for the correct number of consecutive samples.
+ *
+ *---------------------------------------------------------------------*/
+
+static void FPT_scwirod(u32 p_port, unsigned char p_data_bit)
+{
+ unsigned char i;
+
+ i = 0;
+ while (i < MAX_SCSI_TAR) {
+
+ if (RD_HARPOON(p_port + hp_scsidata_0) & p_data_bit)
+
+ i = 0;
+
+ else
+
+ i++;
+
+ }
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: FPT_scwiros
+ *
+ * Description: Sample the SCSI Signal lines making sure the signal has been
+ * deasserted for the correct number of consecutive samples.
+ *
+ *---------------------------------------------------------------------*/
+
+static void FPT_scwiros(u32 p_port, unsigned char p_data_bit)
+{
+ unsigned char i;
+
+ i = 0;
+ while (i < MAX_SCSI_TAR) {
+
+ if (RD_HARPOON(p_port + hp_scsisig) & p_data_bit)
+
+ i = 0;
+
+ else
+
+ i++;
+
+ }
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: FPT_scvalq
+ *
+ * Description: Make sure we received a valid data byte.
+ *
+ *---------------------------------------------------------------------*/
+
+static unsigned char FPT_scvalq(unsigned char p_quintet)
+{
+ unsigned char count;
+
+ for (count = 1; count < 0x08; count <<= 1) {
+ if (!(p_quintet & count))
+ p_quintet -= 0x80;
+ }
+
+ if (p_quintet & 0x18)
+ return 0;
+
+ else
+ return 1;
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: FPT_scsell
+ *
+ * Description: Select the specified device ID using a selection timeout
+ * less than 4ms. If somebody responds then it is a legacy
+ * drive and this ID must be marked as such.
+ *
+ *---------------------------------------------------------------------*/
+
+static unsigned char FPT_scsell(u32 p_port, unsigned char targ_id)
+{
+ unsigned long i;
+
+ WR_HARPOON(p_port + hp_page_ctrl,
+ (RD_HARPOON(p_port + hp_page_ctrl) | G_INT_DISABLE));
+
+ ARAM_ACCESS(p_port);
+
+ WR_HARPOON(p_port + hp_addstat,
+ (RD_HARPOON(p_port + hp_addstat) | SCAM_TIMER));
+ WR_HARPOON(p_port + hp_seltimeout, TO_4ms);
+
+ for (i = p_port + CMD_STRT; i < p_port + CMD_STRT + 12; i += 2) {
+ WRW_HARPOON(i, (MPM_OP + ACOMMAND));
+ }
+ WRW_HARPOON(i, (BRH_OP + ALWAYS + NP));
+
+ WRW_HARPOON((p_port + hp_intstat),
+ (RESET | TIMEOUT | SEL | BUS_FREE | AUTO_INT));
+
+ WR_HARPOON(p_port + hp_select_id, targ_id);
+
+ WR_HARPOON(p_port + hp_portctrl_0, SCSI_PORT);
+ WR_HARPOON(p_port + hp_autostart_3, (SELECT | CMD_ONLY_STRT));
+ WR_HARPOON(p_port + hp_scsictrl_0, (SEL_TAR | ENA_RESEL));
+
+ while (!(RDW_HARPOON((p_port + hp_intstat)) &
+ (RESET | PROG_HLT | TIMEOUT | AUTO_INT))) {
+ }
+
+ if (RDW_HARPOON((p_port + hp_intstat)) & RESET)
+ FPT_Wait(p_port, TO_250ms);
+
+ DISABLE_AUTO(p_port);
+
+ WR_HARPOON(p_port + hp_addstat,
+ (RD_HARPOON(p_port + hp_addstat) & ~SCAM_TIMER));
+ WR_HARPOON(p_port + hp_seltimeout, TO_290ms);
+
+ SGRAM_ACCESS(p_port);
+
+ if (RDW_HARPOON((p_port + hp_intstat)) & (RESET | TIMEOUT)) {
+
+ WRW_HARPOON((p_port + hp_intstat),
+ (RESET | TIMEOUT | SEL | BUS_FREE | PHASE));
+
+ WR_HARPOON(p_port + hp_page_ctrl,
+ (RD_HARPOON(p_port + hp_page_ctrl) &
+ ~G_INT_DISABLE));
+
+ return 0; /*No legacy device */
+ }
+
+ else {
+
+ while (!(RDW_HARPOON((p_port + hp_intstat)) & BUS_FREE)) {
+ if (RD_HARPOON(p_port + hp_scsisig) & SCSI_REQ) {
+ WR_HARPOON(p_port + hp_scsisig,
+ (SCSI_ACK + S_ILL_PH));
+ ACCEPT_MSG(p_port);
+ }
+ }
+
+ WRW_HARPOON((p_port + hp_intstat), CLR_ALL_INT_1);
+
+ WR_HARPOON(p_port + hp_page_ctrl,
+ (RD_HARPOON(p_port + hp_page_ctrl) &
+ ~G_INT_DISABLE));
+
+ return 1; /*Found one of them oldies! */
+ }
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: FPT_scwtsel
+ *
+ * Description: Wait to be selected by another SCAM initiator.
+ *
+ *---------------------------------------------------------------------*/
+
+static void FPT_scwtsel(u32 p_port)
+{
+ while (!(RDW_HARPOON((p_port + hp_intstat)) & SCAM_SEL)) {
+ }
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: FPT_inisci
+ *
+ * Description: Setup the data Structure with the info from the EEPROM.
+ *
+ *---------------------------------------------------------------------*/
+
+static void FPT_inisci(unsigned char p_card, u32 p_port, unsigned char p_our_id)
+{
+ unsigned char i, k, max_id;
+ unsigned short ee_data;
+ struct nvram_info *pCurrNvRam;
+
+ pCurrNvRam = FPT_BL_Card[p_card].pNvRamInfo;
+
+ if (RD_HARPOON(p_port + hp_page_ctrl) & NARROW_SCSI_CARD)
+ max_id = 0x08;
+
+ else
+ max_id = 0x10;
+
+ if (pCurrNvRam) {
+ for (i = 0; i < max_id; i++) {
+
+ for (k = 0; k < 4; k++)
+ FPT_scamInfo[i].id_string[k] =
+ pCurrNvRam->niScamTbl[i][k];
+ for (k = 4; k < ID_STRING_LENGTH; k++)
+ FPT_scamInfo[i].id_string[k] =
+ (unsigned char)0x00;
+
+ if (FPT_scamInfo[i].id_string[0] == 0x00)
+ FPT_scamInfo[i].state = ID_UNUSED; /*Default to unused ID. */
+ else
+ FPT_scamInfo[i].state = ID_UNASSIGNED; /*Default to unassigned ID. */
+
+ }
+ } else {
+ for (i = 0; i < max_id; i++) {
+ for (k = 0; k < ID_STRING_LENGTH; k += 2) {
+ ee_data =
+ FPT_utilEERead(p_port,
+ (unsigned
+ short)((EE_SCAMBASE / 2) +
+ (unsigned short)(i *
+ ((unsigned short)ID_STRING_LENGTH / 2)) + (unsigned short)(k / 2)));
+ FPT_scamInfo[i].id_string[k] =
+ (unsigned char)ee_data;
+ ee_data >>= 8;
+ FPT_scamInfo[i].id_string[k + 1] =
+ (unsigned char)ee_data;
+ }
+
+ if ((FPT_scamInfo[i].id_string[0] == 0x00) ||
+ (FPT_scamInfo[i].id_string[0] == 0xFF))
+
+ FPT_scamInfo[i].state = ID_UNUSED; /*Default to unused ID. */
+
+ else
+ FPT_scamInfo[i].state = ID_UNASSIGNED; /*Default to unassigned ID. */
+
+ }
+ }
+ for (k = 0; k < ID_STRING_LENGTH; k++)
+ FPT_scamInfo[p_our_id].id_string[k] = FPT_scamHAString[k];
+
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: FPT_scmachid
+ *
+ * Description: Match the Device ID string with our values stored in
+ * the EEPROM.
+ *
+ *---------------------------------------------------------------------*/
+
+static unsigned char FPT_scmachid(unsigned char p_card,
+ unsigned char p_id_string[])
+{
+
+ unsigned char i, k, match;
+
+ for (i = 0; i < MAX_SCSI_TAR; i++) {
+
+ match = 1;
+
+ for (k = 0; k < ID_STRING_LENGTH; k++) {
+ if (p_id_string[k] != FPT_scamInfo[i].id_string[k])
+ match = 0;
+ }
+
+ if (match) {
+ FPT_scamInfo[i].state = ID_ASSIGNED;
+ return i;
+ }
+
+ }
+
+ if (p_id_string[0] & BIT(5))
+ i = 8;
+ else
+ i = MAX_SCSI_TAR;
+
+ if (((p_id_string[0] & 0x06) == 0x02)
+ || ((p_id_string[0] & 0x06) == 0x04))
+ match = p_id_string[1] & (unsigned char)0x1F;
+ else
+ match = 7;
+
+ while (i > 0) {
+ i--;
+
+ if (FPT_scamInfo[match].state == ID_UNUSED) {
+ for (k = 0; k < ID_STRING_LENGTH; k++) {
+ FPT_scamInfo[match].id_string[k] =
+ p_id_string[k];
+ }
+
+ FPT_scamInfo[match].state = ID_ASSIGNED;
+
+ if (FPT_BL_Card[p_card].pNvRamInfo == NULL)
+ FPT_BL_Card[p_card].globalFlags |=
+ F_UPDATE_EEPROM;
+ return match;
+
+ }
+
+ match--;
+
+ if (match == 0xFF) {
+ if (p_id_string[0] & BIT(5))
+ match = 7;
+ else
+ match = MAX_SCSI_TAR - 1;
+ }
+ }
+
+ if (p_id_string[0] & BIT(7)) {
+ return CLR_PRIORITY;
+ }
+
+ if (p_id_string[0] & BIT(5))
+ i = 8;
+ else
+ i = MAX_SCSI_TAR;
+
+ if (((p_id_string[0] & 0x06) == 0x02)
+ || ((p_id_string[0] & 0x06) == 0x04))
+ match = p_id_string[1] & (unsigned char)0x1F;
+ else
+ match = 7;
+
+ while (i > 0) {
+
+ i--;
+
+ if (FPT_scamInfo[match].state == ID_UNASSIGNED) {
+ for (k = 0; k < ID_STRING_LENGTH; k++) {
+ FPT_scamInfo[match].id_string[k] =
+ p_id_string[k];
+ }
+
+ FPT_scamInfo[match].id_string[0] |= BIT(7);
+ FPT_scamInfo[match].state = ID_ASSIGNED;
+ if (FPT_BL_Card[p_card].pNvRamInfo == NULL)
+ FPT_BL_Card[p_card].globalFlags |=
+ F_UPDATE_EEPROM;
+ return match;
+
+ }
+
+ match--;
+
+ if (match == 0xFF) {
+ if (p_id_string[0] & BIT(5))
+ match = 7;
+ else
+ match = MAX_SCSI_TAR - 1;
+ }
+ }
+
+ return NO_ID_AVAIL;
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: FPT_scsavdi
+ *
+ * Description: Save off the device SCAM ID strings.
+ *
+ *---------------------------------------------------------------------*/
+
+static void FPT_scsavdi(unsigned char p_card, u32 p_port)
+{
+ unsigned char i, k, max_id;
+ unsigned short ee_data, sum_data;
+
+ sum_data = 0x0000;
+
+ for (i = 1; i < EE_SCAMBASE / 2; i++) {
+ sum_data += FPT_utilEERead(p_port, i);
+ }
+
+ FPT_utilEEWriteOnOff(p_port, 1); /* Enable write access to the EEPROM */
+
+ if (RD_HARPOON(p_port + hp_page_ctrl) & NARROW_SCSI_CARD)
+ max_id = 0x08;
+
+ else
+ max_id = 0x10;
+
+ for (i = 0; i < max_id; i++) {
+
+ for (k = 0; k < ID_STRING_LENGTH; k += 2) {
+ ee_data = FPT_scamInfo[i].id_string[k + 1];
+ ee_data <<= 8;
+ ee_data |= FPT_scamInfo[i].id_string[k];
+ sum_data += ee_data;
+ FPT_utilEEWrite(p_port, ee_data,
+ (unsigned short)((EE_SCAMBASE / 2) +
+ (unsigned short)(i *
+ ((unsigned short)ID_STRING_LENGTH / 2)) + (unsigned short)(k / 2)));
+ }
+ }
+
+ FPT_utilEEWrite(p_port, sum_data, EEPROM_CHECK_SUM / 2);
+ FPT_utilEEWriteOnOff(p_port, 0); /* Turn off write access */
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: FPT_XbowInit
+ *
+ * Description: Setup the Xbow for normal operation.
+ *
+ *---------------------------------------------------------------------*/
+
+static void FPT_XbowInit(u32 port, unsigned char ScamFlg)
+{
+ unsigned char i;
+
+ i = RD_HARPOON(port + hp_page_ctrl);
+ WR_HARPOON(port + hp_page_ctrl, (unsigned char)(i | G_INT_DISABLE));
+
+ WR_HARPOON(port + hp_scsireset, 0x00);
+ WR_HARPOON(port + hp_portctrl_1, HOST_MODE8);
+
+ WR_HARPOON(port + hp_scsireset, (DMA_RESET | HPSCSI_RESET | PROG_RESET |
+ FIFO_CLR));
+
+ WR_HARPOON(port + hp_scsireset, SCSI_INI);
+
+ WR_HARPOON(port + hp_clkctrl_0, CLKCTRL_DEFAULT);
+
+ WR_HARPOON(port + hp_scsisig, 0x00); /* Clear any signals we might */
+ WR_HARPOON(port + hp_scsictrl_0, ENA_SCAM_SEL);
+
+ WRW_HARPOON((port + hp_intstat), CLR_ALL_INT);
+
+ FPT_default_intena = RESET | RSEL | PROG_HLT | TIMEOUT |
+ BUS_FREE | XFER_CNT_0 | AUTO_INT;
+
+ if ((ScamFlg & SCAM_ENABLED) && (ScamFlg & SCAM_LEVEL2))
+ FPT_default_intena |= SCAM_SEL;
+
+ WRW_HARPOON((port + hp_intena), FPT_default_intena);
+
+ WR_HARPOON(port + hp_seltimeout, TO_290ms);
+
+ /* Turn on SCSI_MODE8 for narrow cards to fix the
+ strapping issue with the DUAL CHANNEL card */
+ if (RD_HARPOON(port + hp_page_ctrl) & NARROW_SCSI_CARD)
+ WR_HARPOON(port + hp_addstat, SCSI_MODE8);
+
+ WR_HARPOON(port + hp_page_ctrl, i);
+
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: FPT_BusMasterInit
+ *
+ * Description: Initialize the BusMaster for normal operations.
+ *
+ *---------------------------------------------------------------------*/
+
+static void FPT_BusMasterInit(u32 p_port)
+{
+
+ WR_HARPOON(p_port + hp_sys_ctrl, DRVR_RST);
+ WR_HARPOON(p_port + hp_sys_ctrl, 0x00);
+
+ WR_HARPOON(p_port + hp_host_blk_cnt, XFER_BLK64);
+
+ WR_HARPOON(p_port + hp_bm_ctrl, (BMCTRL_DEFAULT));
+
+ WR_HARPOON(p_port + hp_ee_ctrl, (SCSI_TERM_ENA_H));
+
+ RD_HARPOON(p_port + hp_int_status); /*Clear interrupts. */
+ WR_HARPOON(p_port + hp_int_mask, (INT_CMD_COMPL | SCSI_INTERRUPT));
+ WR_HARPOON(p_port + hp_page_ctrl, (RD_HARPOON(p_port + hp_page_ctrl) &
+ ~SCATTER_EN));
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: FPT_DiagEEPROM
+ *
+ * Description: Verfiy checksum and 'Key' and initialize the EEPROM if
+ * necessary.
+ *
+ *---------------------------------------------------------------------*/
+
+static void FPT_DiagEEPROM(u32 p_port)
+{
+ unsigned short index, temp, max_wd_cnt;
+
+ if (RD_HARPOON(p_port + hp_page_ctrl) & NARROW_SCSI_CARD)
+ max_wd_cnt = EEPROM_WD_CNT;
+ else
+ max_wd_cnt = EEPROM_WD_CNT * 2;
+
+ temp = FPT_utilEERead(p_port, FW_SIGNATURE / 2);
+
+ if (temp == 0x4641) {
+
+ for (index = 2; index < max_wd_cnt; index++) {
+
+ temp += FPT_utilEERead(p_port, index);
+
+ }
+
+ if (temp == FPT_utilEERead(p_port, EEPROM_CHECK_SUM / 2)) {
+
+ return; /*EEPROM is Okay so return now! */
+ }
+ }
+
+ FPT_utilEEWriteOnOff(p_port, (unsigned char)1);
+
+ for (index = 0; index < max_wd_cnt; index++) {
+
+ FPT_utilEEWrite(p_port, 0x0000, index);
+ }
+
+ temp = 0;
+
+ FPT_utilEEWrite(p_port, 0x4641, FW_SIGNATURE / 2);
+ temp += 0x4641;
+ FPT_utilEEWrite(p_port, 0x3920, MODEL_NUMB_0 / 2);
+ temp += 0x3920;
+ FPT_utilEEWrite(p_port, 0x3033, MODEL_NUMB_2 / 2);
+ temp += 0x3033;
+ FPT_utilEEWrite(p_port, 0x2020, MODEL_NUMB_4 / 2);
+ temp += 0x2020;
+ FPT_utilEEWrite(p_port, 0x70D3, SYSTEM_CONFIG / 2);
+ temp += 0x70D3;
+ FPT_utilEEWrite(p_port, 0x0010, BIOS_CONFIG / 2);
+ temp += 0x0010;
+ FPT_utilEEWrite(p_port, 0x0003, SCAM_CONFIG / 2);
+ temp += 0x0003;
+ FPT_utilEEWrite(p_port, 0x0007, ADAPTER_SCSI_ID / 2);
+ temp += 0x0007;
+
+ FPT_utilEEWrite(p_port, 0x0000, IGNORE_B_SCAN / 2);
+ temp += 0x0000;
+ FPT_utilEEWrite(p_port, 0x0000, SEND_START_ENA / 2);
+ temp += 0x0000;
+ FPT_utilEEWrite(p_port, 0x0000, DEVICE_ENABLE / 2);
+ temp += 0x0000;
+
+ FPT_utilEEWrite(p_port, 0x4242, SYNC_RATE_TBL01 / 2);
+ temp += 0x4242;
+ FPT_utilEEWrite(p_port, 0x4242, SYNC_RATE_TBL23 / 2);
+ temp += 0x4242;
+ FPT_utilEEWrite(p_port, 0x4242, SYNC_RATE_TBL45 / 2);
+ temp += 0x4242;
+ FPT_utilEEWrite(p_port, 0x4242, SYNC_RATE_TBL67 / 2);
+ temp += 0x4242;
+ FPT_utilEEWrite(p_port, 0x4242, SYNC_RATE_TBL89 / 2);
+ temp += 0x4242;
+ FPT_utilEEWrite(p_port, 0x4242, SYNC_RATE_TBLab / 2);
+ temp += 0x4242;
+ FPT_utilEEWrite(p_port, 0x4242, SYNC_RATE_TBLcd / 2);
+ temp += 0x4242;
+ FPT_utilEEWrite(p_port, 0x4242, SYNC_RATE_TBLef / 2);
+ temp += 0x4242;
+
+ FPT_utilEEWrite(p_port, 0x6C46, 64 / 2); /*PRODUCT ID */
+ temp += 0x6C46;
+ FPT_utilEEWrite(p_port, 0x7361, 66 / 2); /* FlashPoint LT */
+ temp += 0x7361;
+ FPT_utilEEWrite(p_port, 0x5068, 68 / 2);
+ temp += 0x5068;
+ FPT_utilEEWrite(p_port, 0x696F, 70 / 2);
+ temp += 0x696F;
+ FPT_utilEEWrite(p_port, 0x746E, 72 / 2);
+ temp += 0x746E;
+ FPT_utilEEWrite(p_port, 0x4C20, 74 / 2);
+ temp += 0x4C20;
+ FPT_utilEEWrite(p_port, 0x2054, 76 / 2);
+ temp += 0x2054;
+ FPT_utilEEWrite(p_port, 0x2020, 78 / 2);
+ temp += 0x2020;
+
+ index = ((EE_SCAMBASE / 2) + (7 * 16));
+ FPT_utilEEWrite(p_port, (0x0700 + TYPE_CODE0), index);
+ temp += (0x0700 + TYPE_CODE0);
+ index++;
+ FPT_utilEEWrite(p_port, 0x5542, index); /*Vendor ID code */
+ temp += 0x5542; /* BUSLOGIC */
+ index++;
+ FPT_utilEEWrite(p_port, 0x4C53, index);
+ temp += 0x4C53;
+ index++;
+ FPT_utilEEWrite(p_port, 0x474F, index);
+ temp += 0x474F;
+ index++;
+ FPT_utilEEWrite(p_port, 0x4349, index);
+ temp += 0x4349;
+ index++;
+ FPT_utilEEWrite(p_port, 0x5442, index); /*Vendor unique code */
+ temp += 0x5442; /* BT- 930 */
+ index++;
+ FPT_utilEEWrite(p_port, 0x202D, index);
+ temp += 0x202D;
+ index++;
+ FPT_utilEEWrite(p_port, 0x3339, index);
+ temp += 0x3339;
+ index++; /*Serial # */
+ FPT_utilEEWrite(p_port, 0x2030, index); /* 01234567 */
+ temp += 0x2030;
+ index++;
+ FPT_utilEEWrite(p_port, 0x5453, index);
+ temp += 0x5453;
+ index++;
+ FPT_utilEEWrite(p_port, 0x5645, index);
+ temp += 0x5645;
+ index++;
+ FPT_utilEEWrite(p_port, 0x2045, index);
+ temp += 0x2045;
+ index++;
+ FPT_utilEEWrite(p_port, 0x202F, index);
+ temp += 0x202F;
+ index++;
+ FPT_utilEEWrite(p_port, 0x4F4A, index);
+ temp += 0x4F4A;
+ index++;
+ FPT_utilEEWrite(p_port, 0x204E, index);
+ temp += 0x204E;
+ index++;
+ FPT_utilEEWrite(p_port, 0x3539, index);
+ temp += 0x3539;
+
+ FPT_utilEEWrite(p_port, temp, EEPROM_CHECK_SUM / 2);
+
+ FPT_utilEEWriteOnOff(p_port, (unsigned char)0);
+
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: Queue Search Select
+ *
+ * Description: Try to find a new command to execute.
+ *
+ *---------------------------------------------------------------------*/
+
+static void FPT_queueSearchSelect(struct sccb_card *pCurrCard,
+ unsigned char p_card)
+{
+ unsigned char scan_ptr, lun;
+ struct sccb_mgr_tar_info *currTar_Info;
+ struct sccb *pOldSccb;
+
+ scan_ptr = pCurrCard->scanIndex;
+ do {
+ currTar_Info = &FPT_sccbMgrTbl[p_card][scan_ptr];
+ if ((pCurrCard->globalFlags & F_CONLUN_IO) &&
+ ((currTar_Info->TarStatus & TAR_TAG_Q_MASK) !=
+ TAG_Q_TRYING)) {
+ if (currTar_Info->TarSelQ_Cnt != 0) {
+
+ scan_ptr++;
+ if (scan_ptr == MAX_SCSI_TAR)
+ scan_ptr = 0;
+
+ for (lun = 0; lun < MAX_LUN; lun++) {
+ if (currTar_Info->TarLUNBusy[lun] == 0) {
+
+ pCurrCard->currentSCCB =
+ currTar_Info->TarSelQ_Head;
+ pOldSccb = NULL;
+
+ while ((pCurrCard->
+ currentSCCB != NULL)
+ && (lun !=
+ pCurrCard->
+ currentSCCB->Lun)) {
+ pOldSccb =
+ pCurrCard->
+ currentSCCB;
+ pCurrCard->currentSCCB =
+ (struct sccb
+ *)(pCurrCard->
+ currentSCCB)->
+ Sccb_forwardlink;
+ }
+ if (pCurrCard->currentSCCB ==
+ NULL)
+ continue;
+ if (pOldSccb != NULL) {
+ pOldSccb->
+ Sccb_forwardlink =
+ (struct sccb
+ *)(pCurrCard->
+ currentSCCB)->
+ Sccb_forwardlink;
+ pOldSccb->
+ Sccb_backlink =
+ (struct sccb
+ *)(pCurrCard->
+ currentSCCB)->
+ Sccb_backlink;
+ currTar_Info->
+ TarSelQ_Cnt--;
+ } else {
+ currTar_Info->
+ TarSelQ_Head =
+ (struct sccb
+ *)(pCurrCard->
+ currentSCCB)->
+ Sccb_forwardlink;
+
+ if (currTar_Info->
+ TarSelQ_Head ==
+ NULL) {
+ currTar_Info->
+ TarSelQ_Tail
+ = NULL;
+ currTar_Info->
+ TarSelQ_Cnt
+ = 0;
+ } else {
+ currTar_Info->
+ TarSelQ_Cnt--;
+ currTar_Info->
+ TarSelQ_Head->
+ Sccb_backlink
+ =
+ (struct sccb
+ *)NULL;
+ }
+ }
+ pCurrCard->scanIndex = scan_ptr;
+
+ pCurrCard->globalFlags |=
+ F_NEW_SCCB_CMD;
+
+ break;
+ }
+ }
+ }
+
+ else {
+ scan_ptr++;
+ if (scan_ptr == MAX_SCSI_TAR) {
+ scan_ptr = 0;
+ }
+ }
+
+ } else {
+ if ((currTar_Info->TarSelQ_Cnt != 0) &&
+ (currTar_Info->TarLUNBusy[0] == 0)) {
+
+ pCurrCard->currentSCCB =
+ currTar_Info->TarSelQ_Head;
+
+ currTar_Info->TarSelQ_Head =
+ (struct sccb *)(pCurrCard->currentSCCB)->
+ Sccb_forwardlink;
+
+ if (currTar_Info->TarSelQ_Head == NULL) {
+ currTar_Info->TarSelQ_Tail = NULL;
+ currTar_Info->TarSelQ_Cnt = 0;
+ } else {
+ currTar_Info->TarSelQ_Cnt--;
+ currTar_Info->TarSelQ_Head->
+ Sccb_backlink = (struct sccb *)NULL;
+ }
+
+ scan_ptr++;
+ if (scan_ptr == MAX_SCSI_TAR)
+ scan_ptr = 0;
+
+ pCurrCard->scanIndex = scan_ptr;
+
+ pCurrCard->globalFlags |= F_NEW_SCCB_CMD;
+
+ break;
+ }
+
+ else {
+ scan_ptr++;
+ if (scan_ptr == MAX_SCSI_TAR) {
+ scan_ptr = 0;
+ }
+ }
+ }
+ } while (scan_ptr != pCurrCard->scanIndex);
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: Queue Select Fail
+ *
+ * Description: Add the current SCCB to the head of the Queue.
+ *
+ *---------------------------------------------------------------------*/
+
+static void FPT_queueSelectFail(struct sccb_card *pCurrCard,
+ unsigned char p_card)
+{
+ unsigned char thisTarg;
+ struct sccb_mgr_tar_info *currTar_Info;
+
+ if (pCurrCard->currentSCCB != NULL) {
+ thisTarg =
+ (unsigned char)(((struct sccb *)(pCurrCard->currentSCCB))->
+ TargID);
+ currTar_Info = &FPT_sccbMgrTbl[p_card][thisTarg];
+
+ pCurrCard->currentSCCB->Sccb_backlink = (struct sccb *)NULL;
+
+ pCurrCard->currentSCCB->Sccb_forwardlink =
+ currTar_Info->TarSelQ_Head;
+
+ if (currTar_Info->TarSelQ_Cnt == 0) {
+ currTar_Info->TarSelQ_Tail = pCurrCard->currentSCCB;
+ }
+
+ else {
+ currTar_Info->TarSelQ_Head->Sccb_backlink =
+ pCurrCard->currentSCCB;
+ }
+
+ currTar_Info->TarSelQ_Head = pCurrCard->currentSCCB;
+
+ pCurrCard->currentSCCB = NULL;
+ currTar_Info->TarSelQ_Cnt++;
+ }
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: Queue Command Complete
+ *
+ * Description: Call the callback function with the current SCCB.
+ *
+ *---------------------------------------------------------------------*/
+
+static void FPT_queueCmdComplete(struct sccb_card *pCurrCard,
+ struct sccb *p_sccb, unsigned char p_card)
+{
+
+ unsigned char i, SCSIcmd;
+ CALL_BK_FN callback;
+ struct sccb_mgr_tar_info *currTar_Info;
+
+ SCSIcmd = p_sccb->Cdb[0];
+
+ if (!(p_sccb->Sccb_XferState & F_ALL_XFERRED)) {
+
+ if ((p_sccb->
+ ControlByte & (SCCB_DATA_XFER_OUT | SCCB_DATA_XFER_IN))
+ && (p_sccb->HostStatus == SCCB_COMPLETE)
+ && (p_sccb->TargetStatus != SAM_STAT_CHECK_CONDITION))
+
+ if ((SCSIcmd == READ_6) ||
+ (SCSIcmd == WRITE_6) ||
+ (SCSIcmd == READ_10) ||
+ (SCSIcmd == WRITE_10) ||
+ (SCSIcmd == WRITE_VERIFY) ||
+ (SCSIcmd == START_STOP) ||
+ (pCurrCard->globalFlags & F_NO_FILTER)
+ )
+ p_sccb->HostStatus = SCCB_DATA_UNDER_RUN;
+ }
+
+ if (p_sccb->SccbStatus == SCCB_IN_PROCESS) {
+ if (p_sccb->HostStatus || p_sccb->TargetStatus)
+ p_sccb->SccbStatus = SCCB_ERROR;
+ else
+ p_sccb->SccbStatus = SCCB_SUCCESS;
+ }
+
+ if (p_sccb->Sccb_XferState & F_AUTO_SENSE) {
+
+ p_sccb->CdbLength = p_sccb->Save_CdbLen;
+ for (i = 0; i < 6; i++) {
+ p_sccb->Cdb[i] = p_sccb->Save_Cdb[i];
+ }
+ }
+
+ if ((p_sccb->OperationCode == RESIDUAL_SG_COMMAND) ||
+ (p_sccb->OperationCode == RESIDUAL_COMMAND)) {
+
+ FPT_utilUpdateResidual(p_sccb);
+ }
+
+ pCurrCard->cmdCounter--;
+ if (!pCurrCard->cmdCounter) {
+
+ if (pCurrCard->globalFlags & F_GREEN_PC) {
+ WR_HARPOON(pCurrCard->ioPort + hp_clkctrl_0,
+ (PWR_DWN | CLKCTRL_DEFAULT));
+ WR_HARPOON(pCurrCard->ioPort + hp_sys_ctrl, STOP_CLK);
+ }
+
+ WR_HARPOON(pCurrCard->ioPort + hp_semaphore,
+ (RD_HARPOON(pCurrCard->ioPort + hp_semaphore) &
+ ~SCCB_MGR_ACTIVE));
+
+ }
+
+ if (pCurrCard->discQCount != 0) {
+ currTar_Info = &FPT_sccbMgrTbl[p_card][p_sccb->TargID];
+ if (((pCurrCard->globalFlags & F_CONLUN_IO) &&
+ ((currTar_Info->TarStatus & TAR_TAG_Q_MASK) !=
+ TAG_Q_TRYING))) {
+ pCurrCard->discQCount--;
+ pCurrCard->discQ_Tbl[currTar_Info->
+ LunDiscQ_Idx[p_sccb->Lun]] = NULL;
+ } else {
+ if (p_sccb->Sccb_tag) {
+ pCurrCard->discQCount--;
+ pCurrCard->discQ_Tbl[p_sccb->Sccb_tag] = NULL;
+ } else {
+ pCurrCard->discQCount--;
+ pCurrCard->discQ_Tbl[currTar_Info->
+ LunDiscQ_Idx[0]] = NULL;
+ }
+ }
+
+ }
+
+ callback = (CALL_BK_FN) p_sccb->SccbCallback;
+ callback(p_sccb);
+ pCurrCard->globalFlags |= F_NEW_SCCB_CMD;
+ pCurrCard->currentSCCB = NULL;
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: Queue Disconnect
+ *
+ * Description: Add SCCB to our disconnect array.
+ *
+ *---------------------------------------------------------------------*/
+static void FPT_queueDisconnect(struct sccb *p_sccb, unsigned char p_card)
+{
+ struct sccb_mgr_tar_info *currTar_Info;
+
+ currTar_Info = &FPT_sccbMgrTbl[p_card][p_sccb->TargID];
+
+ if (((FPT_BL_Card[p_card].globalFlags & F_CONLUN_IO) &&
+ ((currTar_Info->TarStatus & TAR_TAG_Q_MASK) != TAG_Q_TRYING))) {
+ FPT_BL_Card[p_card].discQ_Tbl[currTar_Info->
+ LunDiscQ_Idx[p_sccb->Lun]] =
+ p_sccb;
+ } else {
+ if (p_sccb->Sccb_tag) {
+ FPT_BL_Card[p_card].discQ_Tbl[p_sccb->Sccb_tag] =
+ p_sccb;
+ FPT_sccbMgrTbl[p_card][p_sccb->TargID].TarLUNBusy[0] =
+ 0;
+ FPT_sccbMgrTbl[p_card][p_sccb->TargID].TarTagQ_Cnt++;
+ } else {
+ FPT_BL_Card[p_card].discQ_Tbl[currTar_Info->
+ LunDiscQ_Idx[0]] = p_sccb;
+ }
+ }
+ FPT_BL_Card[p_card].currentSCCB = NULL;
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: Queue Flush SCCB
+ *
+ * Description: Flush all SCCB's back to the host driver for this target.
+ *
+ *---------------------------------------------------------------------*/
+
+static void FPT_queueFlushSccb(unsigned char p_card, unsigned char error_code)
+{
+ unsigned char qtag, thisTarg;
+ struct sccb *currSCCB;
+ struct sccb_mgr_tar_info *currTar_Info;
+
+ currSCCB = FPT_BL_Card[p_card].currentSCCB;
+ if (currSCCB != NULL) {
+ thisTarg = (unsigned char)currSCCB->TargID;
+ currTar_Info = &FPT_sccbMgrTbl[p_card][thisTarg];
+
+ for (qtag = 0; qtag < QUEUE_DEPTH; qtag++) {
+
+ if (FPT_BL_Card[p_card].discQ_Tbl[qtag] &&
+ (FPT_BL_Card[p_card].discQ_Tbl[qtag]->TargID ==
+ thisTarg)) {
+
+ FPT_BL_Card[p_card].discQ_Tbl[qtag]->
+ HostStatus = (unsigned char)error_code;
+
+ FPT_queueCmdComplete(&FPT_BL_Card[p_card],
+ FPT_BL_Card[p_card].
+ discQ_Tbl[qtag], p_card);
+
+ FPT_BL_Card[p_card].discQ_Tbl[qtag] = NULL;
+ currTar_Info->TarTagQ_Cnt--;
+
+ }
+ }
+ }
+
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: Queue Flush Target SCCB
+ *
+ * Description: Flush all SCCB's back to the host driver for this target.
+ *
+ *---------------------------------------------------------------------*/
+
+static void FPT_queueFlushTargSccb(unsigned char p_card, unsigned char thisTarg,
+ unsigned char error_code)
+{
+ unsigned char qtag;
+ struct sccb_mgr_tar_info *currTar_Info;
+
+ currTar_Info = &FPT_sccbMgrTbl[p_card][thisTarg];
+
+ for (qtag = 0; qtag < QUEUE_DEPTH; qtag++) {
+
+ if (FPT_BL_Card[p_card].discQ_Tbl[qtag] &&
+ (FPT_BL_Card[p_card].discQ_Tbl[qtag]->TargID == thisTarg)) {
+
+ FPT_BL_Card[p_card].discQ_Tbl[qtag]->HostStatus =
+ (unsigned char)error_code;
+
+ FPT_queueCmdComplete(&FPT_BL_Card[p_card],
+ FPT_BL_Card[p_card].
+ discQ_Tbl[qtag], p_card);
+
+ FPT_BL_Card[p_card].discQ_Tbl[qtag] = NULL;
+ currTar_Info->TarTagQ_Cnt--;
+
+ }
+ }
+
+}
+
+static void FPT_queueAddSccb(struct sccb *p_SCCB, unsigned char p_card)
+{
+ struct sccb_mgr_tar_info *currTar_Info;
+ currTar_Info = &FPT_sccbMgrTbl[p_card][p_SCCB->TargID];
+
+ p_SCCB->Sccb_forwardlink = NULL;
+
+ p_SCCB->Sccb_backlink = currTar_Info->TarSelQ_Tail;
+
+ if (currTar_Info->TarSelQ_Cnt == 0) {
+
+ currTar_Info->TarSelQ_Head = p_SCCB;
+ }
+
+ else {
+
+ currTar_Info->TarSelQ_Tail->Sccb_forwardlink = p_SCCB;
+ }
+
+ currTar_Info->TarSelQ_Tail = p_SCCB;
+ currTar_Info->TarSelQ_Cnt++;
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: Queue Find SCCB
+ *
+ * Description: Search the target select Queue for this SCCB, and
+ * remove it if found.
+ *
+ *---------------------------------------------------------------------*/
+
+static unsigned char FPT_queueFindSccb(struct sccb *p_SCCB,
+ unsigned char p_card)
+{
+ struct sccb *q_ptr;
+ struct sccb_mgr_tar_info *currTar_Info;
+
+ currTar_Info = &FPT_sccbMgrTbl[p_card][p_SCCB->TargID];
+
+ q_ptr = currTar_Info->TarSelQ_Head;
+
+ while (q_ptr != NULL) {
+
+ if (q_ptr == p_SCCB) {
+
+ if (currTar_Info->TarSelQ_Head == q_ptr) {
+
+ currTar_Info->TarSelQ_Head =
+ q_ptr->Sccb_forwardlink;
+ }
+
+ if (currTar_Info->TarSelQ_Tail == q_ptr) {
+
+ currTar_Info->TarSelQ_Tail =
+ q_ptr->Sccb_backlink;
+ }
+
+ if (q_ptr->Sccb_forwardlink != NULL) {
+ q_ptr->Sccb_forwardlink->Sccb_backlink =
+ q_ptr->Sccb_backlink;
+ }
+
+ if (q_ptr->Sccb_backlink != NULL) {
+ q_ptr->Sccb_backlink->Sccb_forwardlink =
+ q_ptr->Sccb_forwardlink;
+ }
+
+ currTar_Info->TarSelQ_Cnt--;
+
+ return 1;
+ }
+
+ else {
+ q_ptr = q_ptr->Sccb_forwardlink;
+ }
+ }
+
+ return 0;
+
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: Utility Update Residual Count
+ *
+ * Description: Update the XferCnt to the remaining byte count.
+ * If we transferred all the data then just write zero.
+ * If Non-SG transfer then report Total Cnt - Actual Transfer
+ * Cnt. For SG transfers add the count fields of all
+ * remaining SG elements, as well as any partial remaining
+ * element.
+ *
+ *---------------------------------------------------------------------*/
+
+static void FPT_utilUpdateResidual(struct sccb *p_SCCB)
+{
+ unsigned long partial_cnt;
+ unsigned int sg_index;
+ struct blogic_sg_seg *segp;
+
+ if (p_SCCB->Sccb_XferState & F_ALL_XFERRED) {
+
+ p_SCCB->DataLength = 0x0000;
+ }
+
+ else if (p_SCCB->Sccb_XferState & F_SG_XFER) {
+
+ partial_cnt = 0x0000;
+
+ sg_index = p_SCCB->Sccb_sgseg;
+
+
+ if (p_SCCB->Sccb_SGoffset) {
+
+ partial_cnt = p_SCCB->Sccb_SGoffset;
+ sg_index++;
+ }
+
+ while (((unsigned long)sg_index *
+ (unsigned long)SG_ELEMENT_SIZE) < p_SCCB->DataLength) {
+ segp = (struct blogic_sg_seg *)(p_SCCB->DataPointer) +
+ (sg_index * 2);
+ partial_cnt += segp->segbytes;
+ sg_index++;
+ }
+
+ p_SCCB->DataLength = partial_cnt;
+ }
+
+ else {
+
+ p_SCCB->DataLength -= p_SCCB->Sccb_ATC;
+ }
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: Wait 1 Second
+ *
+ * Description: Wait for 1 second.
+ *
+ *---------------------------------------------------------------------*/
+
+static void FPT_Wait1Second(u32 p_port)
+{
+ unsigned char i;
+
+ for (i = 0; i < 4; i++) {
+
+ FPT_Wait(p_port, TO_250ms);
+
+ if ((RD_HARPOON(p_port + hp_scsictrl_0) & SCSI_RST))
+ break;
+
+ if ((RDW_HARPOON((p_port + hp_intstat)) & SCAM_SEL))
+ break;
+ }
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: FPT_Wait
+ *
+ * Description: Wait the desired delay.
+ *
+ *---------------------------------------------------------------------*/
+
+static void FPT_Wait(u32 p_port, unsigned char p_delay)
+{
+ unsigned char old_timer;
+ unsigned char green_flag;
+
+ old_timer = RD_HARPOON(p_port + hp_seltimeout);
+
+ green_flag = RD_HARPOON(p_port + hp_clkctrl_0);
+ WR_HARPOON(p_port + hp_clkctrl_0, CLKCTRL_DEFAULT);
+
+ WR_HARPOON(p_port + hp_seltimeout, p_delay);
+ WRW_HARPOON((p_port + hp_intstat), TIMEOUT);
+ WRW_HARPOON((p_port + hp_intena), (FPT_default_intena & ~TIMEOUT));
+
+ WR_HARPOON(p_port + hp_portctrl_0,
+ (RD_HARPOON(p_port + hp_portctrl_0) | START_TO));
+
+ while (!(RDW_HARPOON((p_port + hp_intstat)) & TIMEOUT)) {
+
+ if ((RD_HARPOON(p_port + hp_scsictrl_0) & SCSI_RST))
+ break;
+
+ if ((RDW_HARPOON((p_port + hp_intstat)) & SCAM_SEL))
+ break;
+ }
+
+ WR_HARPOON(p_port + hp_portctrl_0,
+ (RD_HARPOON(p_port + hp_portctrl_0) & ~START_TO));
+
+ WRW_HARPOON((p_port + hp_intstat), TIMEOUT);
+ WRW_HARPOON((p_port + hp_intena), FPT_default_intena);
+
+ WR_HARPOON(p_port + hp_clkctrl_0, green_flag);
+
+ WR_HARPOON(p_port + hp_seltimeout, old_timer);
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: Enable/Disable Write to EEPROM
+ *
+ * Description: The EEPROM must first be enabled for writes
+ * A total of 9 clocks are needed.
+ *
+ *---------------------------------------------------------------------*/
+
+static void FPT_utilEEWriteOnOff(u32 p_port, unsigned char p_mode)
+{
+ unsigned char ee_value;
+
+ ee_value =
+ (unsigned char)(RD_HARPOON(p_port + hp_ee_ctrl) &
+ (EXT_ARB_ACK | SCSI_TERM_ENA_H));
+
+ if (p_mode)
+
+ FPT_utilEESendCmdAddr(p_port, EWEN, EWEN_ADDR);
+
+ else
+
+ FPT_utilEESendCmdAddr(p_port, EWDS, EWDS_ADDR);
+
+ WR_HARPOON(p_port + hp_ee_ctrl, (ee_value | SEE_MS)); /*Turn off CS */
+ WR_HARPOON(p_port + hp_ee_ctrl, ee_value); /*Turn off Master Select */
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: Write EEPROM
+ *
+ * Description: Write a word to the EEPROM at the specified
+ * address.
+ *
+ *---------------------------------------------------------------------*/
+
+static void FPT_utilEEWrite(u32 p_port, unsigned short ee_data,
+ unsigned short ee_addr)
+{
+
+ unsigned char ee_value;
+ unsigned short i;
+
+ ee_value =
+ (unsigned
+ char)((RD_HARPOON(p_port + hp_ee_ctrl) &
+ (EXT_ARB_ACK | SCSI_TERM_ENA_H)) | (SEE_MS | SEE_CS));
+
+ FPT_utilEESendCmdAddr(p_port, EE_WRITE, ee_addr);
+
+ ee_value |= (SEE_MS + SEE_CS);
+
+ for (i = 0x8000; i != 0; i >>= 1) {
+
+ if (i & ee_data)
+ ee_value |= SEE_DO;
+ else
+ ee_value &= ~SEE_DO;
+
+ WR_HARPOON(p_port + hp_ee_ctrl, ee_value);
+ WR_HARPOON(p_port + hp_ee_ctrl, ee_value);
+ ee_value |= SEE_CLK; /* Clock data! */
+ WR_HARPOON(p_port + hp_ee_ctrl, ee_value);
+ WR_HARPOON(p_port + hp_ee_ctrl, ee_value);
+ ee_value &= ~SEE_CLK;
+ WR_HARPOON(p_port + hp_ee_ctrl, ee_value);
+ WR_HARPOON(p_port + hp_ee_ctrl, ee_value);
+ }
+ ee_value &= (EXT_ARB_ACK | SCSI_TERM_ENA_H);
+ WR_HARPOON(p_port + hp_ee_ctrl, (ee_value | SEE_MS));
+
+ FPT_Wait(p_port, TO_10ms);
+
+ WR_HARPOON(p_port + hp_ee_ctrl, (ee_value | SEE_MS | SEE_CS)); /* Set CS to EEPROM */
+ WR_HARPOON(p_port + hp_ee_ctrl, (ee_value | SEE_MS)); /* Turn off CS */
+ WR_HARPOON(p_port + hp_ee_ctrl, ee_value); /* Turn off Master Select */
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: Read EEPROM
+ *
+ * Description: Read a word from the EEPROM at the desired
+ * address.
+ *
+ *---------------------------------------------------------------------*/
+
+static unsigned short FPT_utilEERead(u32 p_port,
+ unsigned short ee_addr)
+{
+ unsigned short i, ee_data1, ee_data2;
+
+ i = 0;
+ ee_data1 = FPT_utilEEReadOrg(p_port, ee_addr);
+ do {
+ ee_data2 = FPT_utilEEReadOrg(p_port, ee_addr);
+
+ if (ee_data1 == ee_data2)
+ return ee_data1;
+
+ ee_data1 = ee_data2;
+ i++;
+
+ } while (i < 4);
+
+ return ee_data1;
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: Read EEPROM Original
+ *
+ * Description: Read a word from the EEPROM at the desired
+ * address.
+ *
+ *---------------------------------------------------------------------*/
+
+static unsigned short FPT_utilEEReadOrg(u32 p_port, unsigned short ee_addr)
+{
+
+ unsigned char ee_value;
+ unsigned short i, ee_data;
+
+ ee_value =
+ (unsigned
+ char)((RD_HARPOON(p_port + hp_ee_ctrl) &
+ (EXT_ARB_ACK | SCSI_TERM_ENA_H)) | (SEE_MS | SEE_CS));
+
+ FPT_utilEESendCmdAddr(p_port, EE_READ, ee_addr);
+
+ ee_value |= (SEE_MS + SEE_CS);
+ ee_data = 0;
+
+ for (i = 1; i <= 16; i++) {
+
+ ee_value |= SEE_CLK; /* Clock data! */
+ WR_HARPOON(p_port + hp_ee_ctrl, ee_value);
+ WR_HARPOON(p_port + hp_ee_ctrl, ee_value);
+ ee_value &= ~SEE_CLK;
+ WR_HARPOON(p_port + hp_ee_ctrl, ee_value);
+ WR_HARPOON(p_port + hp_ee_ctrl, ee_value);
+
+ ee_data <<= 1;
+
+ if (RD_HARPOON(p_port + hp_ee_ctrl) & SEE_DI)
+ ee_data |= 1;
+ }
+
+ ee_value &= ~(SEE_MS + SEE_CS);
+ WR_HARPOON(p_port + hp_ee_ctrl, (ee_value | SEE_MS)); /*Turn off CS */
+ WR_HARPOON(p_port + hp_ee_ctrl, ee_value); /*Turn off Master Select */
+
+ return ee_data;
+}
+
+/*---------------------------------------------------------------------
+ *
+ * Function: Send EE command and Address to the EEPROM
+ *
+ * Description: Transfers the correct command and sends the address
+ * to the eeprom.
+ *
+ *---------------------------------------------------------------------*/
+
+static void FPT_utilEESendCmdAddr(u32 p_port, unsigned char ee_cmd,
+ unsigned short ee_addr)
+{
+ unsigned char ee_value;
+ unsigned char narrow_flg;
+
+ unsigned short i;
+
+ narrow_flg =
+ (unsigned char)(RD_HARPOON(p_port + hp_page_ctrl) &
+ NARROW_SCSI_CARD);
+
+ ee_value = SEE_MS;
+ WR_HARPOON(p_port + hp_ee_ctrl, ee_value);
+
+ ee_value |= SEE_CS; /* Set CS to EEPROM */
+ WR_HARPOON(p_port + hp_ee_ctrl, ee_value);
+
+ for (i = 0x04; i != 0; i >>= 1) {
+
+ if (i & ee_cmd)
+ ee_value |= SEE_DO;
+ else
+ ee_value &= ~SEE_DO;
+
+ WR_HARPOON(p_port + hp_ee_ctrl, ee_value);
+ WR_HARPOON(p_port + hp_ee_ctrl, ee_value);
+ ee_value |= SEE_CLK; /* Clock data! */
+ WR_HARPOON(p_port + hp_ee_ctrl, ee_value);
+ WR_HARPOON(p_port + hp_ee_ctrl, ee_value);
+ ee_value &= ~SEE_CLK;
+ WR_HARPOON(p_port + hp_ee_ctrl, ee_value);
+ WR_HARPOON(p_port + hp_ee_ctrl, ee_value);
+ }
+
+ if (narrow_flg)
+ i = 0x0080;
+
+ else
+ i = 0x0200;
+
+ while (i != 0) {
+
+ if (i & ee_addr)
+ ee_value |= SEE_DO;
+ else
+ ee_value &= ~SEE_DO;
+
+ WR_HARPOON(p_port + hp_ee_ctrl, ee_value);
+ WR_HARPOON(p_port + hp_ee_ctrl, ee_value);
+ ee_value |= SEE_CLK; /* Clock data! */
+ WR_HARPOON(p_port + hp_ee_ctrl, ee_value);
+ WR_HARPOON(p_port + hp_ee_ctrl, ee_value);
+ ee_value &= ~SEE_CLK;
+ WR_HARPOON(p_port + hp_ee_ctrl, ee_value);
+ WR_HARPOON(p_port + hp_ee_ctrl, ee_value);
+
+ i >>= 1;
+ }
+}
+
+static unsigned short FPT_CalcCrc16(unsigned char buffer[])
+{
+ unsigned short crc = 0;
+ int i, j;
+ unsigned short ch;
+ for (i = 0; i < ID_STRING_LENGTH; i++) {
+ ch = (unsigned short)buffer[i];
+ for (j = 0; j < 8; j++) {
+ if ((crc ^ ch) & 1)
+ crc = (crc >> 1) ^ CRCMASK;
+ else
+ crc >>= 1;
+ ch >>= 1;
+ }
+ }
+ return crc;
+}
+
+static unsigned char FPT_CalcLrc(unsigned char buffer[])
+{
+ int i;
+ unsigned char lrc;
+ lrc = 0;
+ for (i = 0; i < ID_STRING_LENGTH; i++)
+ lrc ^= buffer[i];
+ return lrc;
+}
+
+/*
+ The following inline definitions avoid type conflicts.
+*/
+
+static inline unsigned char
+FlashPoint__ProbeHostAdapter(struct fpoint_info *FlashPointInfo)
+{
+ return FlashPoint_ProbeHostAdapter((struct sccb_mgr_info *)
+ FlashPointInfo);
+}
+
+static inline void *
+FlashPoint__HardwareResetHostAdapter(struct fpoint_info *FlashPointInfo)
+{
+ return FlashPoint_HardwareResetHostAdapter((struct sccb_mgr_info *)
+ FlashPointInfo);
+}
+
+static inline void
+FlashPoint__ReleaseHostAdapter(void *CardHandle)
+{
+ FlashPoint_ReleaseHostAdapter(CardHandle);
+}
+
+static inline void
+FlashPoint__StartCCB(void *CardHandle, struct blogic_ccb *CCB)
+{
+ FlashPoint_StartCCB(CardHandle, (struct sccb *)CCB);
+}
+
+static inline void
+FlashPoint__AbortCCB(void *CardHandle, struct blogic_ccb *CCB)
+{
+ FlashPoint_AbortCCB(CardHandle, (struct sccb *)CCB);
+}
+
+static inline bool
+FlashPoint__InterruptPending(void *CardHandle)
+{
+ return FlashPoint_InterruptPending(CardHandle);
+}
+
+static inline int
+FlashPoint__HandleInterrupt(void *CardHandle)
+{
+ return FlashPoint_HandleInterrupt(CardHandle);
+}
+
+#define FlashPoint_ProbeHostAdapter FlashPoint__ProbeHostAdapter
+#define FlashPoint_HardwareResetHostAdapter FlashPoint__HardwareResetHostAdapter
+#define FlashPoint_ReleaseHostAdapter FlashPoint__ReleaseHostAdapter
+#define FlashPoint_StartCCB FlashPoint__StartCCB
+#define FlashPoint_AbortCCB FlashPoint__AbortCCB
+#define FlashPoint_InterruptPending FlashPoint__InterruptPending
+#define FlashPoint_HandleInterrupt FlashPoint__HandleInterrupt
+
+#else /* !CONFIG_SCSI_FLASHPOINT */
+
+/*
+ Define prototypes for the FlashPoint SCCB Manager Functions.
+*/
+
+extern unsigned char FlashPoint_ProbeHostAdapter(struct fpoint_info *);
+extern void *FlashPoint_HardwareResetHostAdapter(struct fpoint_info *);
+extern void FlashPoint_StartCCB(void *, struct blogic_ccb *);
+extern int FlashPoint_AbortCCB(void *, struct blogic_ccb *);
+extern bool FlashPoint_InterruptPending(void *);
+extern int FlashPoint_HandleInterrupt(void *);
+extern void FlashPoint_ReleaseHostAdapter(void *);
+
+#endif /* CONFIG_SCSI_FLASHPOINT */