diff options
Diffstat (limited to 'drivers/scsi/lpfc/lpfc_vport.c')
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_vport.c | 811 |
1 files changed, 811 insertions, 0 deletions
diff --git a/drivers/scsi/lpfc/lpfc_vport.c b/drivers/scsi/lpfc/lpfc_vport.c new file mode 100644 index 000000000..4d171f5c2 --- /dev/null +++ b/drivers/scsi/lpfc/lpfc_vport.c @@ -0,0 +1,811 @@ +/******************************************************************* + * This file is part of the Emulex Linux Device Driver for * + * Fibre Channel Host Bus Adapters. * + * Copyright (C) 2017-2022 Broadcom. All Rights Reserved. The term * + * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries. * + * Copyright (C) 2004-2016 Emulex. All rights reserved. * + * EMULEX and SLI are trademarks of Emulex. * + * www.broadcom.com * + * Portions Copyright (C) 2004-2005 Christoph Hellwig * + * * + * This program is free software; you can redistribute it and/or * + * modify it under the terms of version 2 of the GNU General * + * Public License as published by the Free Software Foundation. * + * This program is distributed in the hope that it will be useful. * + * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND * + * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, * + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE * + * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD * + * TO BE LEGALLY INVALID. See the GNU General Public License for * + * more details, a copy of which can be found in the file COPYING * + * included with this package. * + *******************************************************************/ + +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/idr.h> +#include <linux/interrupt.h> +#include <linux/kthread.h> +#include <linux/pci.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/sched/signal.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_host.h> +#include <scsi/scsi_transport_fc.h> + +#include "lpfc_hw4.h" +#include "lpfc_hw.h" +#include "lpfc_sli.h" +#include "lpfc_sli4.h" +#include "lpfc_nl.h" +#include "lpfc_disc.h" +#include "lpfc_scsi.h" +#include "lpfc.h" +#include "lpfc_logmsg.h" +#include "lpfc_crtn.h" +#include "lpfc_version.h" +#include "lpfc_vport.h" + +inline void lpfc_vport_set_state(struct lpfc_vport *vport, + enum fc_vport_state new_state) +{ + struct fc_vport *fc_vport = vport->fc_vport; + + if (fc_vport) { + /* + * When the transport defines fc_vport_set state we will replace + * this code with the following line + */ + /* fc_vport_set_state(fc_vport, new_state); */ + if (new_state != FC_VPORT_INITIALIZING) + fc_vport->vport_last_state = fc_vport->vport_state; + fc_vport->vport_state = new_state; + } + + /* for all the error states we will set the invternal state to FAILED */ + switch (new_state) { + case FC_VPORT_NO_FABRIC_SUPP: + case FC_VPORT_NO_FABRIC_RSCS: + case FC_VPORT_FABRIC_LOGOUT: + case FC_VPORT_FABRIC_REJ_WWN: + case FC_VPORT_FAILED: + vport->port_state = LPFC_VPORT_FAILED; + break; + case FC_VPORT_LINKDOWN: + vport->port_state = LPFC_VPORT_UNKNOWN; + break; + default: + /* do nothing */ + break; + } +} + +int +lpfc_alloc_vpi(struct lpfc_hba *phba) +{ + unsigned long vpi; + + spin_lock_irq(&phba->hbalock); + /* Start at bit 1 because vpi zero is reserved for the physical port */ + vpi = find_next_zero_bit(phba->vpi_bmask, (phba->max_vpi + 1), 1); + if (vpi > phba->max_vpi) + vpi = 0; + else + set_bit(vpi, phba->vpi_bmask); + if (phba->sli_rev == LPFC_SLI_REV4) + phba->sli4_hba.max_cfg_param.vpi_used++; + spin_unlock_irq(&phba->hbalock); + return vpi; +} + +static void +lpfc_free_vpi(struct lpfc_hba *phba, int vpi) +{ + if (vpi == 0) + return; + spin_lock_irq(&phba->hbalock); + clear_bit(vpi, phba->vpi_bmask); + if (phba->sli_rev == LPFC_SLI_REV4) + phba->sli4_hba.max_cfg_param.vpi_used--; + spin_unlock_irq(&phba->hbalock); +} + +static int +lpfc_vport_sparm(struct lpfc_hba *phba, struct lpfc_vport *vport) +{ + LPFC_MBOXQ_t *pmb; + MAILBOX_t *mb; + struct lpfc_dmabuf *mp; + int rc; + + pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (!pmb) { + return -ENOMEM; + } + mb = &pmb->u.mb; + + rc = lpfc_read_sparam(phba, pmb, vport->vpi); + if (rc) { + mempool_free(pmb, phba->mbox_mem_pool); + return -ENOMEM; + } + + /* + * Wait for the read_sparams mailbox to complete. Driver needs + * this per vport to start the FDISC. If the mailbox fails, + * just cleanup and return an error unless the failure is a + * mailbox timeout. For MBX_TIMEOUT, allow the default + * mbox completion handler to take care of the cleanup. This + * is safe as the mailbox command isn't one that triggers + * another mailbox. + */ + pmb->vport = vport; + rc = lpfc_sli_issue_mbox_wait(phba, pmb, phba->fc_ratov * 2); + if (rc != MBX_SUCCESS) { + if (signal_pending(current)) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, + "1830 Signal aborted mbxCmd x%x\n", + mb->mbxCommand); + if (rc != MBX_TIMEOUT) + lpfc_mbox_rsrc_cleanup(phba, pmb, + MBOX_THD_UNLOCKED); + return -EINTR; + } else { + lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, + "1818 VPort failed init, mbxCmd x%x " + "READ_SPARM mbxStatus x%x, rc = x%x\n", + mb->mbxCommand, mb->mbxStatus, rc); + if (rc != MBX_TIMEOUT) + lpfc_mbox_rsrc_cleanup(phba, pmb, + MBOX_THD_UNLOCKED); + return -EIO; + } + } + + mp = (struct lpfc_dmabuf *)pmb->ctx_buf; + memcpy(&vport->fc_sparam, mp->virt, sizeof (struct serv_parm)); + memcpy(&vport->fc_nodename, &vport->fc_sparam.nodeName, + sizeof (struct lpfc_name)); + memcpy(&vport->fc_portname, &vport->fc_sparam.portName, + sizeof (struct lpfc_name)); + lpfc_mbox_rsrc_cleanup(phba, pmb, MBOX_THD_UNLOCKED); + return 0; +} + +static int +lpfc_valid_wwn_format(struct lpfc_hba *phba, struct lpfc_name *wwn, + const char *name_type) +{ + /* ensure that IEEE format 1 addresses + * contain zeros in bits 59-48 + */ + if (!((wwn->u.wwn[0] >> 4) == 1 && + ((wwn->u.wwn[0] & 0xf) != 0 || (wwn->u.wwn[1] & 0xf) != 0))) + return 1; + + lpfc_printf_log(phba, KERN_ERR, LOG_VPORT, + "1822 Invalid %s: %02x:%02x:%02x:%02x:" + "%02x:%02x:%02x:%02x\n", + name_type, + wwn->u.wwn[0], wwn->u.wwn[1], + wwn->u.wwn[2], wwn->u.wwn[3], + wwn->u.wwn[4], wwn->u.wwn[5], + wwn->u.wwn[6], wwn->u.wwn[7]); + return 0; +} + +static int +lpfc_unique_wwpn(struct lpfc_hba *phba, struct lpfc_vport *new_vport) +{ + struct lpfc_vport *vport; + unsigned long flags; + + spin_lock_irqsave(&phba->port_list_lock, flags); + list_for_each_entry(vport, &phba->port_list, listentry) { + if (vport == new_vport) + continue; + /* If they match, return not unique */ + if (memcmp(&vport->fc_sparam.portName, + &new_vport->fc_sparam.portName, + sizeof(struct lpfc_name)) == 0) { + spin_unlock_irqrestore(&phba->port_list_lock, flags); + return 0; + } + } + spin_unlock_irqrestore(&phba->port_list_lock, flags); + return 1; +} + +/** + * lpfc_discovery_wait - Wait for driver discovery to quiesce + * @vport: The virtual port for which this call is being executed. + * + * This driver calls this routine specifically from lpfc_vport_delete + * to enforce a synchronous execution of vport + * delete relative to discovery activities. The + * lpfc_vport_delete routine should not return until it + * can reasonably guarantee that discovery has quiesced. + * Post FDISC LOGO, the driver must wait until its SAN teardown is + * complete and all resources recovered before allowing + * cleanup. + * + * This routine does not require any locks held. + **/ +static void lpfc_discovery_wait(struct lpfc_vport *vport) +{ + struct lpfc_hba *phba = vport->phba; + uint32_t wait_flags = 0; + unsigned long wait_time_max; + unsigned long start_time; + + wait_flags = FC_RSCN_MODE | FC_RSCN_DISCOVERY | FC_NLP_MORE | + FC_RSCN_DEFERRED | FC_NDISC_ACTIVE | FC_DISC_TMO; + + /* + * The time constraint on this loop is a balance between the + * fabric RA_TOV value and dev_loss tmo. The driver's + * devloss_tmo is 10 giving this loop a 3x multiplier minimally. + */ + wait_time_max = msecs_to_jiffies(((phba->fc_ratov * 3) + 3) * 1000); + wait_time_max += jiffies; + start_time = jiffies; + while (time_before(jiffies, wait_time_max)) { + if ((vport->num_disc_nodes > 0) || + (vport->fc_flag & wait_flags) || + ((vport->port_state > LPFC_VPORT_FAILED) && + (vport->port_state < LPFC_VPORT_READY))) { + lpfc_printf_vlog(vport, KERN_INFO, LOG_VPORT, + "1833 Vport discovery quiesce Wait:" + " state x%x fc_flags x%x" + " num_nodes x%x, waiting 1000 msecs" + " total wait msecs x%x\n", + vport->port_state, vport->fc_flag, + vport->num_disc_nodes, + jiffies_to_msecs(jiffies - start_time)); + msleep(1000); + } else { + /* Base case. Wait variants satisfied. Break out */ + lpfc_printf_vlog(vport, KERN_INFO, LOG_VPORT, + "1834 Vport discovery quiesced:" + " state x%x fc_flags x%x" + " wait msecs x%x\n", + vport->port_state, vport->fc_flag, + jiffies_to_msecs(jiffies + - start_time)); + break; + } + } + + if (time_after(jiffies, wait_time_max)) + lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, + "1835 Vport discovery quiesce failed:" + " state x%x fc_flags x%x wait msecs x%x\n", + vport->port_state, vport->fc_flag, + jiffies_to_msecs(jiffies - start_time)); +} + +int +lpfc_vport_create(struct fc_vport *fc_vport, bool disable) +{ + struct lpfc_nodelist *ndlp; + struct Scsi_Host *shost = fc_vport->shost; + struct lpfc_vport *pport = (struct lpfc_vport *) shost->hostdata; + struct lpfc_hba *phba = pport->phba; + struct lpfc_vport *vport = NULL; + int instance; + int vpi; + int rc = VPORT_ERROR; + int status; + + if ((phba->sli_rev < 3) || !(phba->cfg_enable_npiv)) { + lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, + "1808 Create VPORT failed: " + "NPIV is not enabled: SLImode:%d\n", + phba->sli_rev); + rc = VPORT_INVAL; + goto error_out; + } + + /* NPIV is not supported if HBA has NVME Target enabled */ + if (phba->nvmet_support) { + lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, + "3189 Create VPORT failed: " + "NPIV is not supported on NVME Target\n"); + rc = VPORT_INVAL; + goto error_out; + } + + vpi = lpfc_alloc_vpi(phba); + if (vpi == 0) { + lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, + "1809 Create VPORT failed: " + "Max VPORTs (%d) exceeded\n", + phba->max_vpi); + rc = VPORT_NORESOURCES; + goto error_out; + } + + /* Assign an unused board number */ + if ((instance = lpfc_get_instance()) < 0) { + lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, + "1810 Create VPORT failed: Cannot get " + "instance number\n"); + lpfc_free_vpi(phba, vpi); + rc = VPORT_NORESOURCES; + goto error_out; + } + + vport = lpfc_create_port(phba, instance, &fc_vport->dev); + if (!vport) { + lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, + "1811 Create VPORT failed: vpi x%x\n", vpi); + lpfc_free_vpi(phba, vpi); + rc = VPORT_NORESOURCES; + goto error_out; + } + + vport->vpi = vpi; + lpfc_debugfs_initialize(vport); + + if ((status = lpfc_vport_sparm(phba, vport))) { + if (status == -EINTR) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, + "1831 Create VPORT Interrupted.\n"); + rc = VPORT_ERROR; + } else { + lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, + "1813 Create VPORT failed. " + "Cannot get sparam\n"); + rc = VPORT_NORESOURCES; + } + lpfc_free_vpi(phba, vpi); + destroy_port(vport); + goto error_out; + } + + u64_to_wwn(fc_vport->node_name, vport->fc_nodename.u.wwn); + u64_to_wwn(fc_vport->port_name, vport->fc_portname.u.wwn); + + memcpy(&vport->fc_sparam.portName, vport->fc_portname.u.wwn, 8); + memcpy(&vport->fc_sparam.nodeName, vport->fc_nodename.u.wwn, 8); + + if (!lpfc_valid_wwn_format(phba, &vport->fc_sparam.nodeName, "WWNN") || + !lpfc_valid_wwn_format(phba, &vport->fc_sparam.portName, "WWPN")) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, + "1821 Create VPORT failed. " + "Invalid WWN format\n"); + lpfc_free_vpi(phba, vpi); + destroy_port(vport); + rc = VPORT_INVAL; + goto error_out; + } + + if (!lpfc_unique_wwpn(phba, vport)) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, + "1823 Create VPORT failed. " + "Duplicate WWN on HBA\n"); + lpfc_free_vpi(phba, vpi); + destroy_port(vport); + rc = VPORT_INVAL; + goto error_out; + } + + /* Create binary sysfs attribute for vport */ + lpfc_alloc_sysfs_attr(vport); + + /* Set the DFT_LUN_Q_DEPTH accordingly */ + vport->cfg_lun_queue_depth = phba->pport->cfg_lun_queue_depth; + + /* Only the physical port can support NVME for now */ + vport->cfg_enable_fc4_type = LPFC_ENABLE_FCP; + + *(struct lpfc_vport **)fc_vport->dd_data = vport; + vport->fc_vport = fc_vport; + + /* At this point we are fully registered with SCSI Layer. */ + vport->load_flag |= FC_ALLOW_FDMI; + if (phba->cfg_enable_SmartSAN || + (phba->cfg_fdmi_on == LPFC_FDMI_SUPPORT)) { + /* Setup appropriate attribute masks */ + vport->fdmi_hba_mask = phba->pport->fdmi_hba_mask; + vport->fdmi_port_mask = phba->pport->fdmi_port_mask; + } + + /* + * In SLI4, the vpi must be activated before it can be used + * by the port. + */ + if ((phba->sli_rev == LPFC_SLI_REV4) && + (pport->fc_flag & FC_VFI_REGISTERED)) { + rc = lpfc_sli4_init_vpi(vport); + if (rc) { + lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, + "1838 Failed to INIT_VPI on vpi %d " + "status %d\n", vpi, rc); + rc = VPORT_NORESOURCES; + lpfc_free_vpi(phba, vpi); + goto error_out; + } + } else if (phba->sli_rev == LPFC_SLI_REV4) { + /* + * Driver cannot INIT_VPI now. Set the flags to + * init_vpi when reg_vfi complete. + */ + vport->fc_flag |= FC_VPORT_NEEDS_INIT_VPI; + lpfc_vport_set_state(vport, FC_VPORT_LINKDOWN); + rc = VPORT_OK; + goto out; + } + + if ((phba->link_state < LPFC_LINK_UP) || + (pport->port_state < LPFC_FABRIC_CFG_LINK) || + (phba->fc_topology == LPFC_TOPOLOGY_LOOP)) { + lpfc_vport_set_state(vport, FC_VPORT_LINKDOWN); + rc = VPORT_OK; + goto out; + } + + if (disable) { + lpfc_vport_set_state(vport, FC_VPORT_DISABLED); + rc = VPORT_OK; + goto out; + } + + /* Use the Physical nodes Fabric NDLP to determine if the link is + * up and ready to FDISC. + */ + ndlp = lpfc_findnode_did(phba->pport, Fabric_DID); + if (ndlp && + ndlp->nlp_state == NLP_STE_UNMAPPED_NODE) { + if (phba->link_flag & LS_NPIV_FAB_SUPPORTED) { + lpfc_set_disctmo(vport); + lpfc_initial_fdisc(vport); + } else { + lpfc_vport_set_state(vport, FC_VPORT_NO_FABRIC_SUPP); + lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, + "0262 No NPIV Fabric support\n"); + } + } else { + lpfc_vport_set_state(vport, FC_VPORT_FAILED); + } + rc = VPORT_OK; + +out: + lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT, + "1825 Vport Created.\n"); + lpfc_host_attrib_init(lpfc_shost_from_vport(vport)); +error_out: + return rc; +} + +static int +lpfc_send_npiv_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) +{ + int rc; + struct lpfc_hba *phba = vport->phba; + + DECLARE_WAIT_QUEUE_HEAD_ONSTACK(waitq); + + spin_lock_irq(&ndlp->lock); + if (!(ndlp->save_flags & NLP_WAIT_FOR_LOGO) && + !ndlp->logo_waitq) { + ndlp->logo_waitq = &waitq; + ndlp->nlp_fcp_info &= ~NLP_FCP_2_DEVICE; + ndlp->nlp_flag |= NLP_ISSUE_LOGO; + ndlp->save_flags |= NLP_WAIT_FOR_LOGO; + } + spin_unlock_irq(&ndlp->lock); + rc = lpfc_issue_els_npiv_logo(vport, ndlp); + if (!rc) { + wait_event_timeout(waitq, + (!(ndlp->save_flags & NLP_WAIT_FOR_LOGO)), + msecs_to_jiffies(phba->fc_ratov * 2000)); + + if (!(ndlp->save_flags & NLP_WAIT_FOR_LOGO)) + goto logo_cmpl; + /* LOGO wait failed. Correct status. */ + rc = -EINTR; + } else { + rc = -EIO; + } + + /* Error - clean up node flags. */ + spin_lock_irq(&ndlp->lock); + ndlp->nlp_flag &= ~NLP_ISSUE_LOGO; + ndlp->save_flags &= ~NLP_WAIT_FOR_LOGO; + spin_unlock_irq(&ndlp->lock); + + logo_cmpl: + lpfc_printf_vlog(vport, KERN_INFO, LOG_VPORT, + "1824 Issue LOGO completes with status %d\n", + rc); + spin_lock_irq(&ndlp->lock); + ndlp->logo_waitq = NULL; + spin_unlock_irq(&ndlp->lock); + return rc; +} + +static int +disable_vport(struct fc_vport *fc_vport) +{ + struct lpfc_vport *vport = *(struct lpfc_vport **)fc_vport->dd_data; + struct lpfc_hba *phba = vport->phba; + struct lpfc_nodelist *ndlp = NULL, *next_ndlp = NULL; + struct Scsi_Host *shost = lpfc_shost_from_vport(vport); + + /* Can't disable during an outstanding delete. */ + if (vport->load_flag & FC_UNLOADING) + return 0; + + ndlp = lpfc_findnode_did(vport, Fabric_DID); + if (ndlp && phba->link_state >= LPFC_LINK_UP) + (void)lpfc_send_npiv_logo(vport, ndlp); + + lpfc_sli_host_down(vport); + + /* Mark all nodes for discovery so we can remove them by + * calling lpfc_cleanup_rpis(vport, 1) + */ + list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) { + if (ndlp->nlp_state == NLP_STE_UNUSED_NODE) + continue; + lpfc_disc_state_machine(vport, ndlp, NULL, + NLP_EVT_DEVICE_RECOVERY); + } + lpfc_cleanup_rpis(vport, 1); + + lpfc_stop_vport_timers(vport); + lpfc_unreg_all_rpis(vport); + lpfc_unreg_default_rpis(vport); + /* + * Completion of unreg_vpi (lpfc_mbx_cmpl_unreg_vpi) does the + * scsi_host_put() to release the vport. + */ + lpfc_mbx_unreg_vpi(vport); + if (phba->sli_rev == LPFC_SLI_REV4) { + spin_lock_irq(shost->host_lock); + vport->fc_flag |= FC_VPORT_NEEDS_INIT_VPI; + spin_unlock_irq(shost->host_lock); + } + + lpfc_vport_set_state(vport, FC_VPORT_DISABLED); + lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT, + "1826 Vport Disabled.\n"); + return VPORT_OK; +} + +static int +enable_vport(struct fc_vport *fc_vport) +{ + struct lpfc_vport *vport = *(struct lpfc_vport **)fc_vport->dd_data; + struct lpfc_hba *phba = vport->phba; + struct lpfc_nodelist *ndlp = NULL; + struct Scsi_Host *shost = lpfc_shost_from_vport(vport); + + if ((phba->link_state < LPFC_LINK_UP) || + (phba->fc_topology == LPFC_TOPOLOGY_LOOP)) { + lpfc_vport_set_state(vport, FC_VPORT_LINKDOWN); + return VPORT_OK; + } + + spin_lock_irq(shost->host_lock); + vport->load_flag |= FC_LOADING; + if (vport->fc_flag & FC_VPORT_NEEDS_INIT_VPI) { + spin_unlock_irq(shost->host_lock); + lpfc_issue_init_vpi(vport); + goto out; + } + + vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI; + spin_unlock_irq(shost->host_lock); + + /* Use the Physical nodes Fabric NDLP to determine if the link is + * up and ready to FDISC. + */ + ndlp = lpfc_findnode_did(phba->pport, Fabric_DID); + if (ndlp && ndlp->nlp_state == NLP_STE_UNMAPPED_NODE) { + if (phba->link_flag & LS_NPIV_FAB_SUPPORTED) { + lpfc_set_disctmo(vport); + lpfc_initial_fdisc(vport); + } else { + lpfc_vport_set_state(vport, FC_VPORT_NO_FABRIC_SUPP); + lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, + "0264 No NPIV Fabric support\n"); + } + } else { + lpfc_vport_set_state(vport, FC_VPORT_FAILED); + } + +out: + lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT, + "1827 Vport Enabled.\n"); + return VPORT_OK; +} + +int +lpfc_vport_disable(struct fc_vport *fc_vport, bool disable) +{ + if (disable) + return disable_vport(fc_vport); + else + return enable_vport(fc_vport); +} + +int +lpfc_vport_delete(struct fc_vport *fc_vport) +{ + struct lpfc_nodelist *ndlp = NULL; + struct lpfc_vport *vport = *(struct lpfc_vport **)fc_vport->dd_data; + struct Scsi_Host *shost = lpfc_shost_from_vport(vport); + struct lpfc_hba *phba = vport->phba; + int rc; + + if (vport->port_type == LPFC_PHYSICAL_PORT) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, + "1812 vport_delete failed: Cannot delete " + "physical host\n"); + return VPORT_ERROR; + } + + /* If the vport is a static vport fail the deletion. */ + if ((vport->vport_flag & STATIC_VPORT) && + !(phba->pport->load_flag & FC_UNLOADING)) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, + "1837 vport_delete failed: Cannot delete " + "static vport.\n"); + return VPORT_ERROR; + } + + spin_lock_irq(&phba->hbalock); + vport->load_flag |= FC_UNLOADING; + spin_unlock_irq(&phba->hbalock); + + /* + * If we are not unloading the driver then prevent the vport_delete + * from happening until after this vport's discovery is finished. + */ + if (!(phba->pport->load_flag & FC_UNLOADING)) { + int check_count = 0; + while (check_count < ((phba->fc_ratov * 3) + 3) && + vport->port_state > LPFC_VPORT_FAILED && + vport->port_state < LPFC_VPORT_READY) { + check_count++; + msleep(1000); + } + if (vport->port_state > LPFC_VPORT_FAILED && + vport->port_state < LPFC_VPORT_READY) + return -EAGAIN; + } + + /* + * Take early refcount for outstanding I/O requests we schedule during + * delete processing for unreg_vpi. Always keep this before + * scsi_remove_host() as we can no longer obtain a reference through + * scsi_host_get() after scsi_host_remove as shost is set to SHOST_DEL. + */ + if (!scsi_host_get(shost)) + return VPORT_INVAL; + + lpfc_free_sysfs_attr(vport); + lpfc_debugfs_terminate(vport); + + /* Remove FC host to break driver binding. */ + fc_remove_host(shost); + scsi_remove_host(shost); + + /* Send the DA_ID and Fabric LOGO to cleanup Nameserver entries. */ + ndlp = lpfc_findnode_did(vport, Fabric_DID); + if (!ndlp) + goto skip_logo; + + if (ndlp && ndlp->nlp_state == NLP_STE_UNMAPPED_NODE && + phba->link_state >= LPFC_LINK_UP && + phba->fc_topology != LPFC_TOPOLOGY_LOOP) { + if (vport->cfg_enable_da_id) { + /* Send DA_ID and wait for a completion. */ + rc = lpfc_ns_cmd(vport, SLI_CTNS_DA_ID, 0, 0); + if (rc) { + lpfc_printf_log(vport->phba, KERN_WARNING, + LOG_VPORT, + "1829 CT command failed to " + "delete objects on fabric, " + "rc %d\n", rc); + } + } + + /* + * If the vpi is not registered, then a valid FDISC doesn't + * exist and there is no need for a ELS LOGO. Just cleanup + * the ndlp. + */ + if (!(vport->vpi_state & LPFC_VPI_REGISTERED)) + goto skip_logo; + + /* Issue a Fabric LOGO to cleanup fabric resources. */ + ndlp = lpfc_findnode_did(vport, Fabric_DID); + if (!ndlp) + goto skip_logo; + + rc = lpfc_send_npiv_logo(vport, ndlp); + if (rc) + goto skip_logo; + } + + if (!(phba->pport->load_flag & FC_UNLOADING)) + lpfc_discovery_wait(vport); + +skip_logo: + + lpfc_cleanup(vport); + + /* Remove scsi host now. The nodes are cleaned up. */ + lpfc_sli_host_down(vport); + lpfc_stop_vport_timers(vport); + + if (!(phba->pport->load_flag & FC_UNLOADING)) { + lpfc_unreg_all_rpis(vport); + lpfc_unreg_default_rpis(vport); + /* + * Completion of unreg_vpi (lpfc_mbx_cmpl_unreg_vpi) + * does the scsi_host_put() to release the vport. + */ + if (!(vport->vpi_state & LPFC_VPI_REGISTERED) || + lpfc_mbx_unreg_vpi(vport)) + scsi_host_put(shost); + } else { + scsi_host_put(shost); + } + + lpfc_free_vpi(phba, vport->vpi); + vport->work_port_events = 0; + spin_lock_irq(&phba->port_list_lock); + list_del_init(&vport->listentry); + spin_unlock_irq(&phba->port_list_lock); + lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT, + "1828 Vport Deleted.\n"); + scsi_host_put(shost); + return VPORT_OK; +} + +struct lpfc_vport ** +lpfc_create_vport_work_array(struct lpfc_hba *phba) +{ + struct lpfc_vport *port_iterator; + struct lpfc_vport **vports; + int index = 0; + vports = kcalloc(phba->max_vports + 1, sizeof(struct lpfc_vport *), + GFP_KERNEL); + if (vports == NULL) + return NULL; + spin_lock_irq(&phba->port_list_lock); + list_for_each_entry(port_iterator, &phba->port_list, listentry) { + if (port_iterator->load_flag & FC_UNLOADING) + continue; + if (!scsi_host_get(lpfc_shost_from_vport(port_iterator))) { + lpfc_printf_vlog(port_iterator, KERN_ERR, + LOG_TRACE_EVENT, + "1801 Create vport work array FAILED: " + "cannot do scsi_host_get\n"); + continue; + } + vports[index++] = port_iterator; + } + spin_unlock_irq(&phba->port_list_lock); + return vports; +} + +void +lpfc_destroy_vport_work_array(struct lpfc_hba *phba, struct lpfc_vport **vports) +{ + int i; + if (vports == NULL) + return; + for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) + scsi_host_put(lpfc_shost_from_vport(vports[i])); + kfree(vports); +} + |