summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/ses.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/ses.c')
-rw-r--r--drivers/scsi/ses.c919
1 files changed, 919 insertions, 0 deletions
diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c
new file mode 100644
index 000000000..6a1428d45
--- /dev/null
+++ b/drivers/scsi/ses.c
@@ -0,0 +1,919 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * SCSI Enclosure Services
+ *
+ * Copyright (C) 2008 James Bottomley <James.Bottomley@HansenPartnership.com>
+ */
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/enclosure.h>
+#include <asm/unaligned.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_dbg.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_driver.h>
+#include <scsi/scsi_host.h>
+
+#include <scsi/scsi_transport_sas.h>
+
+struct ses_device {
+ unsigned char *page1;
+ unsigned char *page1_types;
+ unsigned char *page2;
+ unsigned char *page10;
+ short page1_len;
+ short page1_num_types;
+ short page2_len;
+ short page10_len;
+};
+
+struct ses_component {
+ u64 addr;
+};
+
+static bool ses_page2_supported(struct enclosure_device *edev)
+{
+ struct ses_device *ses_dev = edev->scratch;
+
+ return (ses_dev->page2 != NULL);
+}
+
+static int ses_probe(struct device *dev)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+ int err = -ENODEV;
+
+ if (sdev->type != TYPE_ENCLOSURE)
+ goto out;
+
+ err = 0;
+ sdev_printk(KERN_NOTICE, sdev, "Attached Enclosure device\n");
+
+ out:
+ return err;
+}
+
+#define SES_TIMEOUT (30 * HZ)
+#define SES_RETRIES 3
+
+static void init_device_slot_control(unsigned char *dest_desc,
+ struct enclosure_component *ecomp,
+ unsigned char *status)
+{
+ memcpy(dest_desc, status, 4);
+ dest_desc[0] = 0;
+ /* only clear byte 1 for ENCLOSURE_COMPONENT_DEVICE */
+ if (ecomp->type == ENCLOSURE_COMPONENT_DEVICE)
+ dest_desc[1] = 0;
+ dest_desc[2] &= 0xde;
+ dest_desc[3] &= 0x3c;
+}
+
+
+static int ses_recv_diag(struct scsi_device *sdev, int page_code,
+ void *buf, int bufflen)
+{
+ int ret;
+ unsigned char cmd[] = {
+ RECEIVE_DIAGNOSTIC,
+ 1, /* Set PCV bit */
+ page_code,
+ bufflen >> 8,
+ bufflen & 0xff,
+ 0
+ };
+ unsigned char recv_page_code;
+ unsigned int retries = SES_RETRIES;
+ struct scsi_sense_hdr sshdr;
+
+ do {
+ ret = scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buf, bufflen,
+ &sshdr, SES_TIMEOUT, 1, NULL);
+ } while (ret > 0 && --retries && scsi_sense_valid(&sshdr) &&
+ (sshdr.sense_key == NOT_READY ||
+ (sshdr.sense_key == UNIT_ATTENTION && sshdr.asc == 0x29)));
+
+ if (unlikely(ret))
+ return ret;
+
+ recv_page_code = ((unsigned char *)buf)[0];
+
+ if (likely(recv_page_code == page_code))
+ return ret;
+
+ /* successful diagnostic but wrong page code. This happens to some
+ * USB devices, just print a message and pretend there was an error */
+
+ sdev_printk(KERN_ERR, sdev,
+ "Wrong diagnostic page; asked for %d got %u\n",
+ page_code, recv_page_code);
+
+ return -EINVAL;
+}
+
+static int ses_send_diag(struct scsi_device *sdev, int page_code,
+ void *buf, int bufflen)
+{
+ int result;
+
+ unsigned char cmd[] = {
+ SEND_DIAGNOSTIC,
+ 0x10, /* Set PF bit */
+ 0,
+ bufflen >> 8,
+ bufflen & 0xff,
+ 0
+ };
+ struct scsi_sense_hdr sshdr;
+ unsigned int retries = SES_RETRIES;
+
+ do {
+ result = scsi_execute_req(sdev, cmd, DMA_TO_DEVICE, buf, bufflen,
+ &sshdr, SES_TIMEOUT, 1, NULL);
+ } while (result > 0 && --retries && scsi_sense_valid(&sshdr) &&
+ (sshdr.sense_key == NOT_READY ||
+ (sshdr.sense_key == UNIT_ATTENTION && sshdr.asc == 0x29)));
+
+ if (result)
+ sdev_printk(KERN_ERR, sdev, "SEND DIAGNOSTIC result: %8x\n",
+ result);
+ return result;
+}
+
+static int ses_set_page2_descriptor(struct enclosure_device *edev,
+ struct enclosure_component *ecomp,
+ unsigned char *desc)
+{
+ int i, j, count = 0, descriptor = ecomp->number;
+ struct scsi_device *sdev = to_scsi_device(edev->edev.parent);
+ struct ses_device *ses_dev = edev->scratch;
+ unsigned char *type_ptr = ses_dev->page1_types;
+ unsigned char *desc_ptr = ses_dev->page2 + 8;
+
+ /* Clear everything */
+ memset(desc_ptr, 0, ses_dev->page2_len - 8);
+ for (i = 0; i < ses_dev->page1_num_types; i++, type_ptr += 4) {
+ for (j = 0; j < type_ptr[1]; j++) {
+ desc_ptr += 4;
+ if (type_ptr[0] != ENCLOSURE_COMPONENT_DEVICE &&
+ type_ptr[0] != ENCLOSURE_COMPONENT_ARRAY_DEVICE)
+ continue;
+ if (count++ == descriptor) {
+ memcpy(desc_ptr, desc, 4);
+ /* set select */
+ desc_ptr[0] |= 0x80;
+ /* clear reserved, just in case */
+ desc_ptr[0] &= 0xf0;
+ }
+ }
+ }
+
+ return ses_send_diag(sdev, 2, ses_dev->page2, ses_dev->page2_len);
+}
+
+static unsigned char *ses_get_page2_descriptor(struct enclosure_device *edev,
+ struct enclosure_component *ecomp)
+{
+ int i, j, count = 0, descriptor = ecomp->number;
+ struct scsi_device *sdev = to_scsi_device(edev->edev.parent);
+ struct ses_device *ses_dev = edev->scratch;
+ unsigned char *type_ptr = ses_dev->page1_types;
+ unsigned char *desc_ptr = ses_dev->page2 + 8;
+
+ if (ses_recv_diag(sdev, 2, ses_dev->page2, ses_dev->page2_len) < 0)
+ return NULL;
+
+ for (i = 0; i < ses_dev->page1_num_types; i++, type_ptr += 4) {
+ for (j = 0; j < type_ptr[1]; j++) {
+ desc_ptr += 4;
+ if (type_ptr[0] != ENCLOSURE_COMPONENT_DEVICE &&
+ type_ptr[0] != ENCLOSURE_COMPONENT_ARRAY_DEVICE)
+ continue;
+ if (count++ == descriptor)
+ return desc_ptr;
+ }
+ }
+ return NULL;
+}
+
+/* For device slot and array device slot elements, byte 3 bit 6
+ * is "fault sensed" while byte 3 bit 5 is "fault reqstd". As this
+ * code stands these bits are shifted 4 positions right so in
+ * sysfs they will appear as bits 2 and 1 respectively. Strange. */
+static void ses_get_fault(struct enclosure_device *edev,
+ struct enclosure_component *ecomp)
+{
+ unsigned char *desc;
+
+ if (!ses_page2_supported(edev)) {
+ ecomp->fault = 0;
+ return;
+ }
+ desc = ses_get_page2_descriptor(edev, ecomp);
+ if (desc)
+ ecomp->fault = (desc[3] & 0x60) >> 4;
+}
+
+static int ses_set_fault(struct enclosure_device *edev,
+ struct enclosure_component *ecomp,
+ enum enclosure_component_setting val)
+{
+ unsigned char desc[4];
+ unsigned char *desc_ptr;
+
+ if (!ses_page2_supported(edev))
+ return -EINVAL;
+
+ desc_ptr = ses_get_page2_descriptor(edev, ecomp);
+
+ if (!desc_ptr)
+ return -EIO;
+
+ init_device_slot_control(desc, ecomp, desc_ptr);
+
+ switch (val) {
+ case ENCLOSURE_SETTING_DISABLED:
+ desc[3] &= 0xdf;
+ break;
+ case ENCLOSURE_SETTING_ENABLED:
+ desc[3] |= 0x20;
+ break;
+ default:
+ /* SES doesn't do the SGPIO blink settings */
+ return -EINVAL;
+ }
+
+ return ses_set_page2_descriptor(edev, ecomp, desc);
+}
+
+static void ses_get_status(struct enclosure_device *edev,
+ struct enclosure_component *ecomp)
+{
+ unsigned char *desc;
+
+ if (!ses_page2_supported(edev)) {
+ ecomp->status = 0;
+ return;
+ }
+ desc = ses_get_page2_descriptor(edev, ecomp);
+ if (desc)
+ ecomp->status = (desc[0] & 0x0f);
+}
+
+static void ses_get_locate(struct enclosure_device *edev,
+ struct enclosure_component *ecomp)
+{
+ unsigned char *desc;
+
+ if (!ses_page2_supported(edev)) {
+ ecomp->locate = 0;
+ return;
+ }
+ desc = ses_get_page2_descriptor(edev, ecomp);
+ if (desc)
+ ecomp->locate = (desc[2] & 0x02) ? 1 : 0;
+}
+
+static int ses_set_locate(struct enclosure_device *edev,
+ struct enclosure_component *ecomp,
+ enum enclosure_component_setting val)
+{
+ unsigned char desc[4];
+ unsigned char *desc_ptr;
+
+ if (!ses_page2_supported(edev))
+ return -EINVAL;
+
+ desc_ptr = ses_get_page2_descriptor(edev, ecomp);
+
+ if (!desc_ptr)
+ return -EIO;
+
+ init_device_slot_control(desc, ecomp, desc_ptr);
+
+ switch (val) {
+ case ENCLOSURE_SETTING_DISABLED:
+ desc[2] &= 0xfd;
+ break;
+ case ENCLOSURE_SETTING_ENABLED:
+ desc[2] |= 0x02;
+ break;
+ default:
+ /* SES doesn't do the SGPIO blink settings */
+ return -EINVAL;
+ }
+ return ses_set_page2_descriptor(edev, ecomp, desc);
+}
+
+static int ses_set_active(struct enclosure_device *edev,
+ struct enclosure_component *ecomp,
+ enum enclosure_component_setting val)
+{
+ unsigned char desc[4];
+ unsigned char *desc_ptr;
+
+ if (!ses_page2_supported(edev))
+ return -EINVAL;
+
+ desc_ptr = ses_get_page2_descriptor(edev, ecomp);
+
+ if (!desc_ptr)
+ return -EIO;
+
+ init_device_slot_control(desc, ecomp, desc_ptr);
+
+ switch (val) {
+ case ENCLOSURE_SETTING_DISABLED:
+ desc[2] &= 0x7f;
+ ecomp->active = 0;
+ break;
+ case ENCLOSURE_SETTING_ENABLED:
+ desc[2] |= 0x80;
+ ecomp->active = 1;
+ break;
+ default:
+ /* SES doesn't do the SGPIO blink settings */
+ return -EINVAL;
+ }
+ return ses_set_page2_descriptor(edev, ecomp, desc);
+}
+
+static int ses_show_id(struct enclosure_device *edev, char *buf)
+{
+ struct ses_device *ses_dev = edev->scratch;
+ unsigned long long id = get_unaligned_be64(ses_dev->page1+8+4);
+
+ return sprintf(buf, "%#llx\n", id);
+}
+
+static void ses_get_power_status(struct enclosure_device *edev,
+ struct enclosure_component *ecomp)
+{
+ unsigned char *desc;
+
+ if (!ses_page2_supported(edev)) {
+ ecomp->power_status = 0;
+ return;
+ }
+
+ desc = ses_get_page2_descriptor(edev, ecomp);
+ if (desc)
+ ecomp->power_status = (desc[3] & 0x10) ? 0 : 1;
+}
+
+static int ses_set_power_status(struct enclosure_device *edev,
+ struct enclosure_component *ecomp,
+ int val)
+{
+ unsigned char desc[4];
+ unsigned char *desc_ptr;
+
+ if (!ses_page2_supported(edev))
+ return -EINVAL;
+
+ desc_ptr = ses_get_page2_descriptor(edev, ecomp);
+
+ if (!desc_ptr)
+ return -EIO;
+
+ init_device_slot_control(desc, ecomp, desc_ptr);
+
+ switch (val) {
+ /* power = 1 is device_off = 0 and vice versa */
+ case 0:
+ desc[3] |= 0x10;
+ break;
+ case 1:
+ desc[3] &= 0xef;
+ break;
+ default:
+ return -EINVAL;
+ }
+ ecomp->power_status = val;
+ return ses_set_page2_descriptor(edev, ecomp, desc);
+}
+
+static struct enclosure_component_callbacks ses_enclosure_callbacks = {
+ .get_fault = ses_get_fault,
+ .set_fault = ses_set_fault,
+ .get_status = ses_get_status,
+ .get_locate = ses_get_locate,
+ .set_locate = ses_set_locate,
+ .get_power_status = ses_get_power_status,
+ .set_power_status = ses_set_power_status,
+ .set_active = ses_set_active,
+ .show_id = ses_show_id,
+};
+
+struct ses_host_edev {
+ struct Scsi_Host *shost;
+ struct enclosure_device *edev;
+};
+
+#if 0
+int ses_match_host(struct enclosure_device *edev, void *data)
+{
+ struct ses_host_edev *sed = data;
+ struct scsi_device *sdev;
+
+ if (!scsi_is_sdev_device(edev->edev.parent))
+ return 0;
+
+ sdev = to_scsi_device(edev->edev.parent);
+
+ if (sdev->host != sed->shost)
+ return 0;
+
+ sed->edev = edev;
+ return 1;
+}
+#endif /* 0 */
+
+static int ses_process_descriptor(struct enclosure_component *ecomp,
+ unsigned char *desc, int max_desc_len)
+{
+ int eip = desc[0] & 0x10;
+ int invalid = desc[0] & 0x80;
+ enum scsi_protocol proto = desc[0] & 0x0f;
+ u64 addr = 0;
+ int slot = -1;
+ struct ses_component *scomp = ecomp->scratch;
+ unsigned char *d;
+
+ if (invalid)
+ return 0;
+
+ switch (proto) {
+ case SCSI_PROTOCOL_FCP:
+ if (eip) {
+ if (max_desc_len <= 7)
+ return 1;
+ d = desc + 4;
+ slot = d[3];
+ }
+ break;
+ case SCSI_PROTOCOL_SAS:
+
+ if (eip) {
+ if (max_desc_len <= 27)
+ return 1;
+ d = desc + 4;
+ slot = d[3];
+ d = desc + 8;
+ } else {
+ if (max_desc_len <= 23)
+ return 1;
+ d = desc + 4;
+ }
+
+
+ /* only take the phy0 addr */
+ addr = (u64)d[12] << 56 |
+ (u64)d[13] << 48 |
+ (u64)d[14] << 40 |
+ (u64)d[15] << 32 |
+ (u64)d[16] << 24 |
+ (u64)d[17] << 16 |
+ (u64)d[18] << 8 |
+ (u64)d[19];
+ break;
+ default:
+ /* FIXME: Need to add more protocols than just SAS */
+ break;
+ }
+ ecomp->slot = slot;
+ scomp->addr = addr;
+
+ return 0;
+}
+
+struct efd {
+ u64 addr;
+ struct device *dev;
+};
+
+static int ses_enclosure_find_by_addr(struct enclosure_device *edev,
+ void *data)
+{
+ struct efd *efd = data;
+ int i;
+ struct ses_component *scomp;
+
+ for (i = 0; i < edev->components; i++) {
+ scomp = edev->component[i].scratch;
+ if (scomp->addr != efd->addr)
+ continue;
+
+ if (enclosure_add_device(edev, i, efd->dev) == 0)
+ kobject_uevent(&efd->dev->kobj, KOBJ_CHANGE);
+ return 1;
+ }
+ return 0;
+}
+
+#define INIT_ALLOC_SIZE 32
+
+static void ses_enclosure_data_process(struct enclosure_device *edev,
+ struct scsi_device *sdev,
+ int create)
+{
+ u32 result;
+ unsigned char *buf = NULL, *type_ptr, *desc_ptr, *addl_desc_ptr = NULL;
+ int i, j, page7_len, len, components;
+ struct ses_device *ses_dev = edev->scratch;
+ int types = ses_dev->page1_num_types;
+ unsigned char *hdr_buf = kzalloc(INIT_ALLOC_SIZE, GFP_KERNEL);
+
+ if (!hdr_buf)
+ goto simple_populate;
+
+ /* re-read page 10 */
+ if (ses_dev->page10)
+ ses_recv_diag(sdev, 10, ses_dev->page10, ses_dev->page10_len);
+ /* Page 7 for the descriptors is optional */
+ result = ses_recv_diag(sdev, 7, hdr_buf, INIT_ALLOC_SIZE);
+ if (result)
+ goto simple_populate;
+
+ page7_len = len = (hdr_buf[2] << 8) + hdr_buf[3] + 4;
+ /* add 1 for trailing '\0' we'll use */
+ buf = kzalloc(len + 1, GFP_KERNEL);
+ if (!buf)
+ goto simple_populate;
+ result = ses_recv_diag(sdev, 7, buf, len);
+ if (result) {
+ simple_populate:
+ kfree(buf);
+ buf = NULL;
+ desc_ptr = NULL;
+ len = 0;
+ page7_len = 0;
+ } else {
+ desc_ptr = buf + 8;
+ len = (desc_ptr[2] << 8) + desc_ptr[3];
+ /* skip past overall descriptor */
+ desc_ptr += len + 4;
+ }
+ if (ses_dev->page10 && ses_dev->page10_len > 9)
+ addl_desc_ptr = ses_dev->page10 + 8;
+ type_ptr = ses_dev->page1_types;
+ components = 0;
+ for (i = 0; i < types; i++, type_ptr += 4) {
+ for (j = 0; j < type_ptr[1]; j++) {
+ char *name = NULL;
+ struct enclosure_component *ecomp;
+ int max_desc_len;
+
+ if (desc_ptr) {
+ if (desc_ptr + 3 >= buf + page7_len) {
+ desc_ptr = NULL;
+ } else {
+ len = (desc_ptr[2] << 8) + desc_ptr[3];
+ desc_ptr += 4;
+ if (desc_ptr + len > buf + page7_len)
+ desc_ptr = NULL;
+ else {
+ /* Add trailing zero - pushes into
+ * reserved space */
+ desc_ptr[len] = '\0';
+ name = desc_ptr;
+ }
+ }
+ }
+ if (type_ptr[0] == ENCLOSURE_COMPONENT_DEVICE ||
+ type_ptr[0] == ENCLOSURE_COMPONENT_ARRAY_DEVICE) {
+
+ if (create)
+ ecomp = enclosure_component_alloc(
+ edev,
+ components++,
+ type_ptr[0],
+ name);
+ else if (components < edev->components)
+ ecomp = &edev->component[components++];
+ else
+ ecomp = ERR_PTR(-EINVAL);
+
+ if (!IS_ERR(ecomp)) {
+ if (addl_desc_ptr) {
+ max_desc_len = ses_dev->page10_len -
+ (addl_desc_ptr - ses_dev->page10);
+ if (ses_process_descriptor(ecomp,
+ addl_desc_ptr,
+ max_desc_len))
+ addl_desc_ptr = NULL;
+ }
+ if (create)
+ enclosure_component_register(
+ ecomp);
+ }
+ }
+ if (desc_ptr)
+ desc_ptr += len;
+
+ if (addl_desc_ptr &&
+ /* only find additional descriptions for specific devices */
+ (type_ptr[0] == ENCLOSURE_COMPONENT_DEVICE ||
+ type_ptr[0] == ENCLOSURE_COMPONENT_ARRAY_DEVICE ||
+ type_ptr[0] == ENCLOSURE_COMPONENT_SAS_EXPANDER ||
+ /* these elements are optional */
+ type_ptr[0] == ENCLOSURE_COMPONENT_SCSI_TARGET_PORT ||
+ type_ptr[0] == ENCLOSURE_COMPONENT_SCSI_INITIATOR_PORT ||
+ type_ptr[0] == ENCLOSURE_COMPONENT_CONTROLLER_ELECTRONICS)) {
+ addl_desc_ptr += addl_desc_ptr[1] + 2;
+ if (addl_desc_ptr + 1 >= ses_dev->page10 + ses_dev->page10_len)
+ addl_desc_ptr = NULL;
+ }
+ }
+ }
+ kfree(buf);
+ kfree(hdr_buf);
+}
+
+static void ses_match_to_enclosure(struct enclosure_device *edev,
+ struct scsi_device *sdev,
+ int refresh)
+{
+ struct scsi_device *edev_sdev = to_scsi_device(edev->edev.parent);
+ struct efd efd = {
+ .addr = 0,
+ };
+
+ if (refresh)
+ ses_enclosure_data_process(edev, edev_sdev, 0);
+
+ if (scsi_is_sas_rphy(sdev->sdev_target->dev.parent))
+ efd.addr = sas_get_address(sdev);
+
+ if (efd.addr) {
+ efd.dev = &sdev->sdev_gendev;
+
+ enclosure_for_each_device(ses_enclosure_find_by_addr, &efd);
+ }
+}
+
+static int ses_intf_add(struct device *cdev,
+ struct class_interface *intf)
+{
+ struct scsi_device *sdev = to_scsi_device(cdev->parent);
+ struct scsi_device *tmp_sdev;
+ unsigned char *buf = NULL, *hdr_buf, *type_ptr, page;
+ struct ses_device *ses_dev;
+ u32 result;
+ int i, types, len, components = 0;
+ int err = -ENOMEM;
+ int num_enclosures;
+ struct enclosure_device *edev;
+ struct ses_component *scomp = NULL;
+
+ if (!scsi_device_enclosure(sdev)) {
+ /* not an enclosure, but might be in one */
+ struct enclosure_device *prev = NULL;
+
+ while ((edev = enclosure_find(&sdev->host->shost_gendev, prev)) != NULL) {
+ ses_match_to_enclosure(edev, sdev, 1);
+ prev = edev;
+ }
+ return -ENODEV;
+ }
+
+ /* TYPE_ENCLOSURE prints a message in probe */
+ if (sdev->type != TYPE_ENCLOSURE)
+ sdev_printk(KERN_NOTICE, sdev, "Embedded Enclosure Device\n");
+
+ ses_dev = kzalloc(sizeof(*ses_dev), GFP_KERNEL);
+ hdr_buf = kzalloc(INIT_ALLOC_SIZE, GFP_KERNEL);
+ if (!hdr_buf || !ses_dev)
+ goto err_init_free;
+
+ page = 1;
+ result = ses_recv_diag(sdev, page, hdr_buf, INIT_ALLOC_SIZE);
+ if (result)
+ goto recv_failed;
+
+ len = (hdr_buf[2] << 8) + hdr_buf[3] + 4;
+ buf = kzalloc(len, GFP_KERNEL);
+ if (!buf)
+ goto err_free;
+
+ result = ses_recv_diag(sdev, page, buf, len);
+ if (result)
+ goto recv_failed;
+
+ types = 0;
+
+ /* we always have one main enclosure and the rest are referred
+ * to as secondary subenclosures */
+ num_enclosures = buf[1] + 1;
+
+ /* begin at the enclosure descriptor */
+ type_ptr = buf + 8;
+ /* skip all the enclosure descriptors */
+ for (i = 0; i < num_enclosures && type_ptr < buf + len; i++) {
+ types += type_ptr[2];
+ type_ptr += type_ptr[3] + 4;
+ }
+
+ ses_dev->page1_types = type_ptr;
+ ses_dev->page1_num_types = types;
+
+ for (i = 0; i < types && type_ptr < buf + len; i++, type_ptr += 4) {
+ if (type_ptr[0] == ENCLOSURE_COMPONENT_DEVICE ||
+ type_ptr[0] == ENCLOSURE_COMPONENT_ARRAY_DEVICE)
+ components += type_ptr[1];
+ }
+
+ ses_dev->page1 = buf;
+ ses_dev->page1_len = len;
+ buf = NULL;
+
+ page = 2;
+ result = ses_recv_diag(sdev, page, hdr_buf, INIT_ALLOC_SIZE);
+ if (result)
+ goto page2_not_supported;
+
+ len = (hdr_buf[2] << 8) + hdr_buf[3] + 4;
+ buf = kzalloc(len, GFP_KERNEL);
+ if (!buf)
+ goto err_free;
+
+ /* make sure getting page 2 actually works */
+ result = ses_recv_diag(sdev, 2, buf, len);
+ if (result)
+ goto recv_failed;
+ ses_dev->page2 = buf;
+ ses_dev->page2_len = len;
+ buf = NULL;
+
+ /* The additional information page --- allows us
+ * to match up the devices */
+ page = 10;
+ result = ses_recv_diag(sdev, page, hdr_buf, INIT_ALLOC_SIZE);
+ if (!result) {
+
+ len = (hdr_buf[2] << 8) + hdr_buf[3] + 4;
+ buf = kzalloc(len, GFP_KERNEL);
+ if (!buf)
+ goto err_free;
+
+ result = ses_recv_diag(sdev, page, buf, len);
+ if (result)
+ goto recv_failed;
+ ses_dev->page10 = buf;
+ ses_dev->page10_len = len;
+ buf = NULL;
+ }
+page2_not_supported:
+ if (components > 0) {
+ scomp = kcalloc(components, sizeof(struct ses_component), GFP_KERNEL);
+ if (!scomp)
+ goto err_free;
+ }
+
+ edev = enclosure_register(cdev->parent, dev_name(&sdev->sdev_gendev),
+ components, &ses_enclosure_callbacks);
+ if (IS_ERR(edev)) {
+ err = PTR_ERR(edev);
+ goto err_free;
+ }
+
+ kfree(hdr_buf);
+
+ edev->scratch = ses_dev;
+ for (i = 0; i < components; i++)
+ edev->component[i].scratch = scomp + i;
+
+ ses_enclosure_data_process(edev, sdev, 1);
+
+ /* see if there are any devices matching before
+ * we found the enclosure */
+ shost_for_each_device(tmp_sdev, sdev->host) {
+ if (tmp_sdev->lun != 0 || scsi_device_enclosure(tmp_sdev))
+ continue;
+ ses_match_to_enclosure(edev, tmp_sdev, 0);
+ }
+
+ return 0;
+
+ recv_failed:
+ sdev_printk(KERN_ERR, sdev, "Failed to get diagnostic page 0x%x\n",
+ page);
+ err = -ENODEV;
+ err_free:
+ kfree(buf);
+ kfree(scomp);
+ kfree(ses_dev->page10);
+ kfree(ses_dev->page2);
+ kfree(ses_dev->page1);
+ err_init_free:
+ kfree(ses_dev);
+ kfree(hdr_buf);
+ sdev_printk(KERN_ERR, sdev, "Failed to bind enclosure %d\n", err);
+ return err;
+}
+
+static int ses_remove(struct device *dev)
+{
+ return 0;
+}
+
+static void ses_intf_remove_component(struct scsi_device *sdev)
+{
+ struct enclosure_device *edev, *prev = NULL;
+
+ while ((edev = enclosure_find(&sdev->host->shost_gendev, prev)) != NULL) {
+ prev = edev;
+ if (!enclosure_remove_device(edev, &sdev->sdev_gendev))
+ break;
+ }
+ if (edev)
+ put_device(&edev->edev);
+}
+
+static void ses_intf_remove_enclosure(struct scsi_device *sdev)
+{
+ struct enclosure_device *edev;
+ struct ses_device *ses_dev;
+
+ /* exact match to this enclosure */
+ edev = enclosure_find(&sdev->sdev_gendev, NULL);
+ if (!edev)
+ return;
+
+ ses_dev = edev->scratch;
+ edev->scratch = NULL;
+
+ kfree(ses_dev->page10);
+ kfree(ses_dev->page1);
+ kfree(ses_dev->page2);
+ kfree(ses_dev);
+
+ if (edev->components)
+ kfree(edev->component[0].scratch);
+
+ put_device(&edev->edev);
+ enclosure_unregister(edev);
+}
+
+static void ses_intf_remove(struct device *cdev,
+ struct class_interface *intf)
+{
+ struct scsi_device *sdev = to_scsi_device(cdev->parent);
+
+ if (!scsi_device_enclosure(sdev))
+ ses_intf_remove_component(sdev);
+ else
+ ses_intf_remove_enclosure(sdev);
+}
+
+static struct class_interface ses_interface = {
+ .add_dev = ses_intf_add,
+ .remove_dev = ses_intf_remove,
+};
+
+static struct scsi_driver ses_template = {
+ .gendrv = {
+ .name = "ses",
+ .owner = THIS_MODULE,
+ .probe = ses_probe,
+ .remove = ses_remove,
+ },
+};
+
+static int __init ses_init(void)
+{
+ int err;
+
+ err = scsi_register_interface(&ses_interface);
+ if (err)
+ return err;
+
+ err = scsi_register_driver(&ses_template.gendrv);
+ if (err)
+ goto out_unreg;
+
+ return 0;
+
+ out_unreg:
+ scsi_unregister_interface(&ses_interface);
+ return err;
+}
+
+static void __exit ses_exit(void)
+{
+ scsi_unregister_driver(&ses_template.gendrv);
+ scsi_unregister_interface(&ses_interface);
+}
+
+module_init(ses_init);
+module_exit(ses_exit);
+
+MODULE_ALIAS_SCSI_DEVICE(TYPE_ENCLOSURE);
+
+MODULE_AUTHOR("James Bottomley");
+MODULE_DESCRIPTION("SCSI Enclosure Services (ses) driver");
+MODULE_LICENSE("GPL v2");