diff options
Diffstat (limited to 'drivers/soc/bcm/brcmstb/pm/pm-mips.c')
| -rw-r--r-- | drivers/soc/bcm/brcmstb/pm/pm-mips.c | 456 |
1 files changed, 456 insertions, 0 deletions
diff --git a/drivers/soc/bcm/brcmstb/pm/pm-mips.c b/drivers/soc/bcm/brcmstb/pm/pm-mips.c new file mode 100644 index 000000000..4dfb5a850 --- /dev/null +++ b/drivers/soc/bcm/brcmstb/pm/pm-mips.c @@ -0,0 +1,456 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * MIPS-specific support for Broadcom STB S2/S3/S5 power management + * + * Copyright (C) 2016-2017 Broadcom + */ + +#include <linux/kernel.h> +#include <linux/printk.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/delay.h> +#include <linux/suspend.h> +#include <asm/bmips.h> +#include <asm/tlbflush.h> + +#include "pm.h" + +#define S2_NUM_PARAMS 6 +#define MAX_NUM_MEMC 3 + +/* S3 constants */ +#define MAX_GP_REGS 16 +#define MAX_CP0_REGS 32 +#define NUM_MEMC_CLIENTS 128 +#define AON_CTRL_RAM_SIZE 128 +#define BRCMSTB_S3_MAGIC 0x5AFEB007 + +#define CLEAR_RESET_MASK 0x01 + +/* Index each CP0 register that needs to be saved */ +#define CONTEXT 0 +#define USER_LOCAL 1 +#define PGMK 2 +#define HWRENA 3 +#define COMPARE 4 +#define STATUS 5 +#define CONFIG 6 +#define MODE 7 +#define EDSP 8 +#define BOOT_VEC 9 +#define EBASE 10 + +struct brcmstb_memc { + void __iomem *ddr_phy_base; + void __iomem *arb_base; +}; + +struct brcmstb_pm_control { + void __iomem *aon_ctrl_base; + void __iomem *aon_sram_base; + void __iomem *timers_base; + struct brcmstb_memc memcs[MAX_NUM_MEMC]; + int num_memc; +}; + +struct brcm_pm_s3_context { + u32 cp0_regs[MAX_CP0_REGS]; + u32 memc0_rts[NUM_MEMC_CLIENTS]; + u32 sc_boot_vec; +}; + +struct brcmstb_mem_transfer; + +struct brcmstb_mem_transfer { + struct brcmstb_mem_transfer *next; + void *src; + void *dst; + dma_addr_t pa_src; + dma_addr_t pa_dst; + u32 len; + u8 key; + u8 mode; + u8 src_remapped; + u8 dst_remapped; + u8 src_dst_remapped; +}; + +#define AON_SAVE_SRAM(base, idx, val) \ + __raw_writel(val, base + (idx << 2)) + +/* Used for saving registers in asm */ +u32 gp_regs[MAX_GP_REGS]; + +#define BSP_CLOCK_STOP 0x00 +#define PM_INITIATE 0x01 + +static struct brcmstb_pm_control ctrl; + +static void brcm_pm_save_cp0_context(struct brcm_pm_s3_context *ctx) +{ + /* Generic MIPS */ + ctx->cp0_regs[CONTEXT] = read_c0_context(); + ctx->cp0_regs[USER_LOCAL] = read_c0_userlocal(); + ctx->cp0_regs[PGMK] = read_c0_pagemask(); + ctx->cp0_regs[HWRENA] = read_c0_cache(); + ctx->cp0_regs[COMPARE] = read_c0_compare(); + ctx->cp0_regs[STATUS] = read_c0_status(); + + /* Broadcom specific */ + ctx->cp0_regs[CONFIG] = read_c0_brcm_config(); + ctx->cp0_regs[MODE] = read_c0_brcm_mode(); + ctx->cp0_regs[EDSP] = read_c0_brcm_edsp(); + ctx->cp0_regs[BOOT_VEC] = read_c0_brcm_bootvec(); + ctx->cp0_regs[EBASE] = read_c0_ebase(); + + ctx->sc_boot_vec = bmips_read_zscm_reg(0xa0); +} + +static void brcm_pm_restore_cp0_context(struct brcm_pm_s3_context *ctx) +{ + /* Restore cp0 state */ + bmips_write_zscm_reg(0xa0, ctx->sc_boot_vec); + + /* Generic MIPS */ + write_c0_context(ctx->cp0_regs[CONTEXT]); + write_c0_userlocal(ctx->cp0_regs[USER_LOCAL]); + write_c0_pagemask(ctx->cp0_regs[PGMK]); + write_c0_cache(ctx->cp0_regs[HWRENA]); + write_c0_compare(ctx->cp0_regs[COMPARE]); + write_c0_status(ctx->cp0_regs[STATUS]); + + /* Broadcom specific */ + write_c0_brcm_config(ctx->cp0_regs[CONFIG]); + write_c0_brcm_mode(ctx->cp0_regs[MODE]); + write_c0_brcm_edsp(ctx->cp0_regs[EDSP]); + write_c0_brcm_bootvec(ctx->cp0_regs[BOOT_VEC]); + write_c0_ebase(ctx->cp0_regs[EBASE]); +} + +static void brcmstb_pm_handshake(void) +{ + void __iomem *base = ctrl.aon_ctrl_base; + u32 tmp; + + /* BSP power handshake, v1 */ + tmp = __raw_readl(base + AON_CTRL_HOST_MISC_CMDS); + tmp &= ~1UL; + __raw_writel(tmp, base + AON_CTRL_HOST_MISC_CMDS); + (void)__raw_readl(base + AON_CTRL_HOST_MISC_CMDS); + + __raw_writel(0, base + AON_CTRL_PM_INITIATE); + (void)__raw_readl(base + AON_CTRL_PM_INITIATE); + __raw_writel(BSP_CLOCK_STOP | PM_INITIATE, + base + AON_CTRL_PM_INITIATE); + /* + * HACK: BSP may have internal race on the CLOCK_STOP command. + * Avoid touching the BSP for a few milliseconds. + */ + mdelay(3); +} + +static void brcmstb_pm_s5(void) +{ + void __iomem *base = ctrl.aon_ctrl_base; + + brcmstb_pm_handshake(); + + /* Clear magic s3 warm-boot value */ + AON_SAVE_SRAM(ctrl.aon_sram_base, 0, 0); + + /* Set the countdown */ + __raw_writel(0x10, base + AON_CTRL_PM_CPU_WAIT_COUNT); + (void)__raw_readl(base + AON_CTRL_PM_CPU_WAIT_COUNT); + + /* Prepare to S5 cold boot */ + __raw_writel(PM_COLD_CONFIG, base + AON_CTRL_PM_CTRL); + (void)__raw_readl(base + AON_CTRL_PM_CTRL); + + __raw_writel((PM_COLD_CONFIG | PM_PWR_DOWN), base + + AON_CTRL_PM_CTRL); + (void)__raw_readl(base + AON_CTRL_PM_CTRL); + + __asm__ __volatile__( + " wait\n" + : : : "memory"); +} + +static int brcmstb_pm_s3(void) +{ + struct brcm_pm_s3_context s3_context; + void __iomem *memc_arb_base; + unsigned long flags; + u32 tmp; + int i; + + /* Prepare for s3 */ + AON_SAVE_SRAM(ctrl.aon_sram_base, 0, BRCMSTB_S3_MAGIC); + AON_SAVE_SRAM(ctrl.aon_sram_base, 1, (u32)&s3_reentry); + AON_SAVE_SRAM(ctrl.aon_sram_base, 2, 0); + + /* Clear RESET_HISTORY */ + tmp = __raw_readl(ctrl.aon_ctrl_base + AON_CTRL_RESET_CTRL); + tmp &= ~CLEAR_RESET_MASK; + __raw_writel(tmp, ctrl.aon_ctrl_base + AON_CTRL_RESET_CTRL); + + local_irq_save(flags); + + /* Inhibit DDR_RSTb pulse for both MMCs*/ + for (i = 0; i < ctrl.num_memc; i++) { + tmp = __raw_readl(ctrl.memcs[i].ddr_phy_base + + DDR40_PHY_CONTROL_REGS_0_STANDBY_CTRL); + + tmp &= ~0x0f; + __raw_writel(tmp, ctrl.memcs[i].ddr_phy_base + + DDR40_PHY_CONTROL_REGS_0_STANDBY_CTRL); + tmp |= (0x05 | BIT(5)); + __raw_writel(tmp, ctrl.memcs[i].ddr_phy_base + + DDR40_PHY_CONTROL_REGS_0_STANDBY_CTRL); + } + + /* Save CP0 context */ + brcm_pm_save_cp0_context(&s3_context); + + /* Save RTS(skip debug register) */ + memc_arb_base = ctrl.memcs[0].arb_base + 4; + for (i = 0; i < NUM_MEMC_CLIENTS; i++) { + s3_context.memc0_rts[i] = __raw_readl(memc_arb_base); + memc_arb_base += 4; + } + + /* Save I/O context */ + local_flush_tlb_all(); + _dma_cache_wback_inv(0, ~0); + + brcm_pm_do_s3(ctrl.aon_ctrl_base, current_cpu_data.dcache.linesz); + + /* CPU reconfiguration */ + local_flush_tlb_all(); + bmips_cpu_setup(); + cpumask_clear(&bmips_booted_mask); + + /* Restore RTS (skip debug register) */ + memc_arb_base = ctrl.memcs[0].arb_base + 4; + for (i = 0; i < NUM_MEMC_CLIENTS; i++) { + __raw_writel(s3_context.memc0_rts[i], memc_arb_base); + memc_arb_base += 4; + } + + /* restore CP0 context */ + brcm_pm_restore_cp0_context(&s3_context); + + local_irq_restore(flags); + + return 0; +} + +static int brcmstb_pm_s2(void) +{ + /* + * We need to pass 6 arguments to an assembly function. Lets avoid the + * stack and pass arguments in a explicit 4 byte array. The assembly + * code assumes all arguments are 4 bytes and arguments are ordered + * like so: + * + * 0: AON_CTRl base register + * 1: DDR_PHY base register + * 2: TIMERS base resgister + * 3: I-Cache line size + * 4: Restart vector address + * 5: Restart vector size + */ + u32 s2_params[6]; + + /* Prepare s2 parameters */ + s2_params[0] = (u32)ctrl.aon_ctrl_base; + s2_params[1] = (u32)ctrl.memcs[0].ddr_phy_base; + s2_params[2] = (u32)ctrl.timers_base; + s2_params[3] = (u32)current_cpu_data.icache.linesz; + s2_params[4] = (u32)BMIPS_WARM_RESTART_VEC; + s2_params[5] = (u32)(bmips_smp_int_vec_end - + bmips_smp_int_vec); + + /* Drop to standby */ + brcm_pm_do_s2(s2_params); + + return 0; +} + +static int brcmstb_pm_standby(bool deep_standby) +{ + brcmstb_pm_handshake(); + + /* Send IRQs to BMIPS_WARM_RESTART_VEC */ + clear_c0_cause(CAUSEF_IV); + irq_disable_hazard(); + set_c0_status(ST0_BEV); + irq_disable_hazard(); + + if (deep_standby) + brcmstb_pm_s3(); + else + brcmstb_pm_s2(); + + /* Send IRQs to normal runtime vectors */ + clear_c0_status(ST0_BEV); + irq_disable_hazard(); + set_c0_cause(CAUSEF_IV); + irq_disable_hazard(); + + return 0; +} + +static int brcmstb_pm_enter(suspend_state_t state) +{ + int ret = -EINVAL; + + switch (state) { + case PM_SUSPEND_STANDBY: + ret = brcmstb_pm_standby(false); + break; + case PM_SUSPEND_MEM: + ret = brcmstb_pm_standby(true); + break; + } + + return ret; +} + +static int brcmstb_pm_valid(suspend_state_t state) +{ + switch (state) { + case PM_SUSPEND_STANDBY: + return true; + case PM_SUSPEND_MEM: + return true; + default: + return false; + } +} + +static const struct platform_suspend_ops brcmstb_pm_ops = { + .enter = brcmstb_pm_enter, + .valid = brcmstb_pm_valid, +}; + +static const struct of_device_id aon_ctrl_dt_ids[] = { + { .compatible = "brcm,brcmstb-aon-ctrl" }, + { /* sentinel */ } +}; + +static const struct of_device_id ddr_phy_dt_ids[] = { + { .compatible = "brcm,brcmstb-ddr-phy" }, + { /* sentinel */ } +}; + +static const struct of_device_id arb_dt_ids[] = { + { .compatible = "brcm,brcmstb-memc-arb" }, + { /* sentinel */ } +}; + +static const struct of_device_id timers_ids[] = { + { .compatible = "brcm,brcmstb-timers" }, + { /* sentinel */ } +}; + +static inline void __iomem *brcmstb_ioremap_node(struct device_node *dn, + int index) +{ + return of_io_request_and_map(dn, index, dn->full_name); +} + +static void __iomem *brcmstb_ioremap_match(const struct of_device_id *matches, + int index, const void **ofdata) +{ + struct device_node *dn; + const struct of_device_id *match; + + dn = of_find_matching_node_and_match(NULL, matches, &match); + if (!dn) + return ERR_PTR(-EINVAL); + + if (ofdata) + *ofdata = match->data; + + return brcmstb_ioremap_node(dn, index); +} + +static int brcmstb_pm_init(void) +{ + struct device_node *dn; + void __iomem *base; + int i; + + /* AON ctrl registers */ + base = brcmstb_ioremap_match(aon_ctrl_dt_ids, 0, NULL); + if (IS_ERR(base)) { + pr_err("error mapping AON_CTRL\n"); + goto aon_err; + } + ctrl.aon_ctrl_base = base; + + /* AON SRAM registers */ + base = brcmstb_ioremap_match(aon_ctrl_dt_ids, 1, NULL); + if (IS_ERR(base)) { + pr_err("error mapping AON_SRAM\n"); + goto sram_err; + } + ctrl.aon_sram_base = base; + + ctrl.num_memc = 0; + /* Map MEMC DDR PHY registers */ + for_each_matching_node(dn, ddr_phy_dt_ids) { + i = ctrl.num_memc; + if (i >= MAX_NUM_MEMC) { + pr_warn("Too many MEMCs (max %d)\n", MAX_NUM_MEMC); + of_node_put(dn); + break; + } + base = brcmstb_ioremap_node(dn, 0); + if (IS_ERR(base)) { + of_node_put(dn); + goto ddr_err; + } + + ctrl.memcs[i].ddr_phy_base = base; + ctrl.num_memc++; + } + + /* MEMC ARB registers */ + base = brcmstb_ioremap_match(arb_dt_ids, 0, NULL); + if (IS_ERR(base)) { + pr_err("error mapping MEMC ARB\n"); + goto ddr_err; + } + ctrl.memcs[0].arb_base = base; + + /* Timer registers */ + base = brcmstb_ioremap_match(timers_ids, 0, NULL); + if (IS_ERR(base)) { + pr_err("error mapping timers\n"); + goto tmr_err; + } + ctrl.timers_base = base; + + /* s3 cold boot aka s5 */ + pm_power_off = brcmstb_pm_s5; + + suspend_set_ops(&brcmstb_pm_ops); + + return 0; + +tmr_err: + iounmap(ctrl.memcs[0].arb_base); +ddr_err: + for (i = 0; i < ctrl.num_memc; i++) + iounmap(ctrl.memcs[i].ddr_phy_base); + + iounmap(ctrl.aon_sram_base); +sram_err: + iounmap(ctrl.aon_ctrl_base); +aon_err: + return PTR_ERR(base); +} +arch_initcall(brcmstb_pm_init); |