diff options
Diffstat (limited to 'include/uapi/sound/snd_sst_tokens.h')
| -rw-r--r-- | include/uapi/sound/snd_sst_tokens.h | 324 |
1 files changed, 324 insertions, 0 deletions
diff --git a/include/uapi/sound/snd_sst_tokens.h b/include/uapi/sound/snd_sst_tokens.h new file mode 100644 index 000000000..defeb0c6e --- /dev/null +++ b/include/uapi/sound/snd_sst_tokens.h @@ -0,0 +1,324 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * snd_sst_tokens.h - Intel SST tokens definition + * + * Copyright (C) 2016 Intel Corp + * Author: Shreyas NC <shreyas.nc@intel.com> + */ +#ifndef __SND_SST_TOKENS_H__ +#define __SND_SST_TOKENS_H__ + +/** + * %SKL_TKN_UUID: Module UUID + * + * %SKL_TKN_U8_BLOCK_TYPE: Type of the private data block.Can be: + * tuples, bytes, short and words + * + * %SKL_TKN_U8_IN_PIN_TYPE: Input pin type, + * homogenous=0, heterogenous=1 + * + * %SKL_TKN_U8_OUT_PIN_TYPE: Output pin type, + * homogenous=0, heterogenous=1 + * %SKL_TKN_U8_DYN_IN_PIN: Configure Input pin dynamically + * if true + * + * %SKL_TKN_U8_DYN_OUT_PIN: Configure Output pin dynamically + * if true + * + * %SKL_TKN_U8_IN_QUEUE_COUNT: Store the number of Input pins + * + * %SKL_TKN_U8_OUT_QUEUE_COUNT: Store the number of Output pins + * + * %SKL_TKN_U8_TIME_SLOT: TDM slot number + * + * %SKL_TKN_U8_CORE_ID: Stores module affinity value.Can take + * the values: + * SKL_AFFINITY_CORE_0 = 0, + * SKL_AFFINITY_CORE_1, + * SKL_AFFINITY_CORE_MAX + * + * %SKL_TKN_U8_MOD_TYPE: Module type value. + * + * %SKL_TKN_U8_CONN_TYPE: Module connection type can be a FE, + * BE or NONE as defined : + * SKL_PIPE_CONN_TYPE_NONE = 0, + * SKL_PIPE_CONN_TYPE_FE = 1 (HOST_DMA) + * SKL_PIPE_CONN_TYPE_BE = 2 (LINK_DMA) + * + * %SKL_TKN_U8_DEV_TYPE: Type of device to which the module is + * connected + * Can take the values: + * SKL_DEVICE_BT = 0x0, + * SKL_DEVICE_DMIC = 0x1, + * SKL_DEVICE_I2S = 0x2, + * SKL_DEVICE_SLIMBUS = 0x3, + * SKL_DEVICE_HDALINK = 0x4, + * SKL_DEVICE_HDAHOST = 0x5, + * SKL_DEVICE_NONE + * + * %SKL_TKN_U8_HW_CONN_TYPE: Connection type of the HW to which the + * module is connected + * SKL_CONN_NONE = 0, + * SKL_CONN_SOURCE = 1, + * SKL_CONN_SINK = 2 + * + * %SKL_TKN_U16_PIN_INST_ID: Stores the pin instance id + * + * %SKL_TKN_U16_MOD_INST_ID: Stores the mdule instance id + * + * %SKL_TKN_U32_MAX_MCPS: Module max mcps value + * + * %SKL_TKN_U32_MEM_PAGES: Module resource pages + * + * %SKL_TKN_U32_OBS: Stores Output Buffer size + * + * %SKL_TKN_U32_IBS: Stores input buffer size + * + * %SKL_TKN_U32_VBUS_ID: Module VBUS_ID. PDM=0, SSP0=0, + * SSP1=1,SSP2=2, + * SSP3=3, SSP4=4, + * SSP5=5, SSP6=6,INVALID + * + * %SKL_TKN_U32_PARAMS_FIXUP: Module Params fixup mask + * %SKL_TKN_U32_CONVERTER: Module params converter mask + * %SKL_TKN_U32_PIPE_ID: Stores the pipe id + * + * %SKL_TKN_U32_PIPE_CONN_TYPE: Type of the token to which the pipe is + * connected to. It can be + * SKL_PIPE_CONN_TYPE_NONE = 0, + * SKL_PIPE_CONN_TYPE_FE = 1 (HOST_DMA), + * SKL_PIPE_CONN_TYPE_BE = 2 (LINK_DMA), + * + * %SKL_TKN_U32_PIPE_PRIORITY: Pipe priority value + * %SKL_TKN_U32_PIPE_MEM_PGS: Pipe resource pages + * + * %SKL_TKN_U32_DIR_PIN_COUNT: Value for the direction to set input/output + * formats and the pin count. + * The first 4 bits have the direction + * value and the next 4 have + * the pin count value. + * SKL_DIR_IN = 0, SKL_DIR_OUT = 1. + * The input and output formats + * share the same set of tokens + * with the distinction between input + * and output made by reading direction + * token. + * + * %SKL_TKN_U32_FMT_CH: Supported channel count + * + * %SKL_TKN_U32_FMT_FREQ: Supported frequency/sample rate + * + * %SKL_TKN_U32_FMT_BIT_DEPTH: Supported container size + * + * %SKL_TKN_U32_FMT_SAMPLE_SIZE:Number of samples in the container + * + * %SKL_TKN_U32_FMT_CH_CONFIG: Supported channel configurations for the + * input/output. + * + * %SKL_TKN_U32_FMT_INTERLEAVE: Interleaving style which can be per + * channel or per sample. The values can be : + * SKL_INTERLEAVING_PER_CHANNEL = 0, + * SKL_INTERLEAVING_PER_SAMPLE = 1, + * + * %SKL_TKN_U32_FMT_SAMPLE_TYPE: + * Specifies the sample type. Can take the + * values: SKL_SAMPLE_TYPE_INT_MSB = 0, + * SKL_SAMPLE_TYPE_INT_LSB = 1, + * SKL_SAMPLE_TYPE_INT_SIGNED = 2, + * SKL_SAMPLE_TYPE_INT_UNSIGNED = 3, + * SKL_SAMPLE_TYPE_FLOAT = 4 + * + * %SKL_TKN_U32_CH_MAP: Channel map values + * %SKL_TKN_U32_MOD_SET_PARAMS: It can take these values: + * SKL_PARAM_DEFAULT, SKL_PARAM_INIT, + * SKL_PARAM_SET, SKL_PARAM_BIND + * + * %SKL_TKN_U32_MOD_PARAM_ID: ID of the module params + * + * %SKL_TKN_U32_CAPS_SET_PARAMS: + * Set params value + * + * %SKL_TKN_U32_CAPS_PARAMS_ID: Params ID + * + * %SKL_TKN_U32_CAPS_SIZE: Caps size + * + * %SKL_TKN_U32_PROC_DOMAIN: Specify processing domain + * + * %SKL_TKN_U32_LIB_COUNT: Specifies the number of libraries + * + * %SKL_TKN_STR_LIB_NAME: Specifies the library name + * + * %SKL_TKN_U32_PMODE: Specifies the power mode for pipe + * + * %SKL_TKL_U32_D0I3_CAPS: Specifies the D0i3 capability for module + * + * %SKL_TKN_U32_DMA_BUF_SIZE: DMA buffer size in millisec + * + * %SKL_TKN_U32_PIPE_DIR: Specifies pipe direction. Can be + * playback/capture. + * + * %SKL_TKN_U32_NUM_CONFIGS: Number of pipe configs + * + * %SKL_TKN_U32_PATH_MEM_PGS: Size of memory (in pages) required for pipeline + * and its data + * + * %SKL_TKN_U32_PIPE_CONFIG_ID: Config id for the modules in the pipe + * and PCM params supported by that pipe + * config. This is used as index to fill + * up the pipe config and module config + * structure. + * + * %SKL_TKN_U32_CFG_FREQ: + * %SKL_TKN_U8_CFG_CHAN: + * %SKL_TKN_U8_CFG_BPS: PCM params (freq, channels, bits per sample) + * supported for each of the pipe configs. + * + * %SKL_TKN_CFG_MOD_RES_ID: Module's resource index for each of the + * pipe config + * + * %SKL_TKN_CFG_MOD_FMT_ID: Module's interface index for each of the + * pipe config + * + * %SKL_TKN_U8_NUM_MOD: Number of modules in the manifest + * + * %SKL_TKN_MM_U8_MOD_IDX: Current index of the module in the manifest + * + * %SKL_TKN_MM_U8_NUM_RES: Number of resources for the module + * + * %SKL_TKN_MM_U8_NUM_INTF: Number of interfaces for the module + * + * %SKL_TKN_MM_U32_RES_ID: Resource index for the resource info to + * be filled into. + * A module can support multiple resource + * configuration and is represnted as a + * resource table. This index is used to + * fill information into appropriate index. + * + * %SKL_TKN_MM_U32_CPS: DSP cycles per second + * + * %SKL_TKN_MM_U32_DMA_SIZE: Allocated buffer size for gateway DMA + * + * %SKL_TKN_MM_U32_CPC: DSP cycles allocated per frame + * + * %SKL_TKN_MM_U32_RES_PIN_ID: Resource pin index in the module + * + * %SKL_TKN_MM_U32_INTF_PIN_ID: Interface index in the module + * + * %SKL_TKN_MM_U32_PIN_BUF: Buffer size of the module pin + * + * %SKL_TKN_MM_U32_FMT_ID: Format index for each of the interface/ + * format information to be filled into. + * + * %SKL_TKN_MM_U32_NUM_IN_FMT: Number of input formats + * %SKL_TKN_MM_U32_NUM_OUT_FMT: Number of output formats + * + * %SKL_TKN_U32_ASTATE_IDX: Table Index for the A-State entry to be filled + * with kcps and clock source + * + * %SKL_TKN_U32_ASTATE_COUNT: Number of valid entries in A-State table + * + * %SKL_TKN_U32_ASTATE_KCPS: Specifies the core load threshold (in kilo + * cycles per second) below which DSP is clocked + * from source specified by clock source. + * + * %SKL_TKN_U32_ASTATE_CLK_SRC: Clock source for A-State entry + * + * %SKL_TKN_U32_FMT_CFG_IDX: Format config index + * + * module_id and loadable flags dont have tokens as these values will be + * read from the DSP FW manifest + * + * Tokens defined can be used either in the manifest or widget private data. + * + * SKL_TKN_MM is used as a suffix for all tokens that represent + * module data in the manifest. + */ +enum SKL_TKNS { + SKL_TKN_UUID = 1, + SKL_TKN_U8_NUM_BLOCKS, + SKL_TKN_U8_BLOCK_TYPE, + SKL_TKN_U8_IN_PIN_TYPE, + SKL_TKN_U8_OUT_PIN_TYPE, + SKL_TKN_U8_DYN_IN_PIN, + SKL_TKN_U8_DYN_OUT_PIN, + SKL_TKN_U8_IN_QUEUE_COUNT, + SKL_TKN_U8_OUT_QUEUE_COUNT, + SKL_TKN_U8_TIME_SLOT, + SKL_TKN_U8_CORE_ID, + SKL_TKN_U8_MOD_TYPE, + SKL_TKN_U8_CONN_TYPE, + SKL_TKN_U8_DEV_TYPE, + SKL_TKN_U8_HW_CONN_TYPE, + SKL_TKN_U16_MOD_INST_ID, + SKL_TKN_U16_BLOCK_SIZE, + SKL_TKN_U32_MAX_MCPS, + SKL_TKN_U32_MEM_PAGES, + SKL_TKN_U32_OBS, + SKL_TKN_U32_IBS, + SKL_TKN_U32_VBUS_ID, + SKL_TKN_U32_PARAMS_FIXUP, + SKL_TKN_U32_CONVERTER, + SKL_TKN_U32_PIPE_ID, + SKL_TKN_U32_PIPE_CONN_TYPE, + SKL_TKN_U32_PIPE_PRIORITY, + SKL_TKN_U32_PIPE_MEM_PGS, + SKL_TKN_U32_DIR_PIN_COUNT, + SKL_TKN_U32_FMT_CH, + SKL_TKN_U32_FMT_FREQ, + SKL_TKN_U32_FMT_BIT_DEPTH, + SKL_TKN_U32_FMT_SAMPLE_SIZE, + SKL_TKN_U32_FMT_CH_CONFIG, + SKL_TKN_U32_FMT_INTERLEAVE, + SKL_TKN_U32_FMT_SAMPLE_TYPE, + SKL_TKN_U32_FMT_CH_MAP, + SKL_TKN_U32_PIN_MOD_ID, + SKL_TKN_U32_PIN_INST_ID, + SKL_TKN_U32_MOD_SET_PARAMS, + SKL_TKN_U32_MOD_PARAM_ID, + SKL_TKN_U32_CAPS_SET_PARAMS, + SKL_TKN_U32_CAPS_PARAMS_ID, + SKL_TKN_U32_CAPS_SIZE, + SKL_TKN_U32_PROC_DOMAIN, + SKL_TKN_U32_LIB_COUNT, + SKL_TKN_STR_LIB_NAME, + SKL_TKN_U32_PMODE, + SKL_TKL_U32_D0I3_CAPS, /* Typo added at v4.10 */ + SKL_TKN_U32_D0I3_CAPS = SKL_TKL_U32_D0I3_CAPS, + SKL_TKN_U32_DMA_BUF_SIZE, + + SKL_TKN_U32_PIPE_DIRECTION, + SKL_TKN_U32_PIPE_CONFIG_ID, + SKL_TKN_U32_NUM_CONFIGS, + SKL_TKN_U32_PATH_MEM_PGS, + + SKL_TKN_U32_CFG_FREQ, + SKL_TKN_U8_CFG_CHAN, + SKL_TKN_U8_CFG_BPS, + SKL_TKN_CFG_MOD_RES_ID, + SKL_TKN_CFG_MOD_FMT_ID, + SKL_TKN_U8_NUM_MOD, + + SKL_TKN_MM_U8_MOD_IDX, + SKL_TKN_MM_U8_NUM_RES, + SKL_TKN_MM_U8_NUM_INTF, + SKL_TKN_MM_U32_RES_ID, + SKL_TKN_MM_U32_CPS, + SKL_TKN_MM_U32_DMA_SIZE, + SKL_TKN_MM_U32_CPC, + SKL_TKN_MM_U32_RES_PIN_ID, + SKL_TKN_MM_U32_INTF_PIN_ID, + SKL_TKN_MM_U32_PIN_BUF, + SKL_TKN_MM_U32_FMT_ID, + SKL_TKN_MM_U32_NUM_IN_FMT, + SKL_TKN_MM_U32_NUM_OUT_FMT, + + SKL_TKN_U32_ASTATE_IDX, + SKL_TKN_U32_ASTATE_COUNT, + SKL_TKN_U32_ASTATE_KCPS, + SKL_TKN_U32_ASTATE_CLK_SRC, + + SKL_TKN_U32_FMT_CFG_IDX = 96, + SKL_TKN_MAX = SKL_TKN_U32_FMT_CFG_IDX, +}; + +#endif |