diff options
Diffstat (limited to '')
| -rw-r--r-- | kernel/printk/printk_ringbuffer.h | 384 |
1 files changed, 384 insertions, 0 deletions
diff --git a/kernel/printk/printk_ringbuffer.h b/kernel/printk/printk_ringbuffer.h new file mode 100644 index 000000000..18cd25e48 --- /dev/null +++ b/kernel/printk/printk_ringbuffer.h @@ -0,0 +1,384 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef _KERNEL_PRINTK_RINGBUFFER_H +#define _KERNEL_PRINTK_RINGBUFFER_H + +#include <linux/atomic.h> +#include <linux/dev_printk.h> + +/* + * Meta information about each stored message. + * + * All fields are set by the printk code except for @seq, which is + * set by the ringbuffer code. + */ +struct printk_info { + u64 seq; /* sequence number */ + u64 ts_nsec; /* timestamp in nanoseconds */ + u16 text_len; /* length of text message */ + u8 facility; /* syslog facility */ + u8 flags:5; /* internal record flags */ + u8 level:3; /* syslog level */ + u32 caller_id; /* thread id or processor id */ + + struct dev_printk_info dev_info; +}; + +/* + * A structure providing the buffers, used by writers and readers. + * + * Writers: + * Using prb_rec_init_wr(), a writer sets @text_buf_size before calling + * prb_reserve(). On success, prb_reserve() sets @info and @text_buf to + * buffers reserved for that writer. + * + * Readers: + * Using prb_rec_init_rd(), a reader sets all fields before calling + * prb_read_valid(). Note that the reader provides the @info and @text_buf, + * buffers. On success, the struct pointed to by @info will be filled and + * the char array pointed to by @text_buf will be filled with text data. + */ +struct printk_record { + struct printk_info *info; + char *text_buf; + unsigned int text_buf_size; +}; + +/* Specifies the logical position and span of a data block. */ +struct prb_data_blk_lpos { + unsigned long begin; + unsigned long next; +}; + +/* + * A descriptor: the complete meta-data for a record. + * + * @state_var: A bitwise combination of descriptor ID and descriptor state. + */ +struct prb_desc { + atomic_long_t state_var; + struct prb_data_blk_lpos text_blk_lpos; +}; + +/* A ringbuffer of "ID + data" elements. */ +struct prb_data_ring { + unsigned int size_bits; + char *data; + atomic_long_t head_lpos; + atomic_long_t tail_lpos; +}; + +/* A ringbuffer of "struct prb_desc" elements. */ +struct prb_desc_ring { + unsigned int count_bits; + struct prb_desc *descs; + struct printk_info *infos; + atomic_long_t head_id; + atomic_long_t tail_id; + atomic_long_t last_finalized_id; +}; + +/* + * The high level structure representing the printk ringbuffer. + * + * @fail: Count of failed prb_reserve() calls where not even a data-less + * record was created. + */ +struct printk_ringbuffer { + struct prb_desc_ring desc_ring; + struct prb_data_ring text_data_ring; + atomic_long_t fail; +}; + +/* + * Used by writers as a reserve/commit handle. + * + * @rb: Ringbuffer where the entry is reserved. + * @irqflags: Saved irq flags to restore on entry commit. + * @id: ID of the reserved descriptor. + * @text_space: Total occupied buffer space in the text data ring, including + * ID, alignment padding, and wrapping data blocks. + * + * This structure is an opaque handle for writers. Its contents are only + * to be used by the ringbuffer implementation. + */ +struct prb_reserved_entry { + struct printk_ringbuffer *rb; + unsigned long irqflags; + unsigned long id; + unsigned int text_space; +}; + +/* The possible responses of a descriptor state-query. */ +enum desc_state { + desc_miss = -1, /* ID mismatch (pseudo state) */ + desc_reserved = 0x0, /* reserved, in use by writer */ + desc_committed = 0x1, /* committed by writer, could get reopened */ + desc_finalized = 0x2, /* committed, no further modification allowed */ + desc_reusable = 0x3, /* free, not yet used by any writer */ +}; + +#define _DATA_SIZE(sz_bits) (1UL << (sz_bits)) +#define _DESCS_COUNT(ct_bits) (1U << (ct_bits)) +#define DESC_SV_BITS (sizeof(unsigned long) * 8) +#define DESC_FLAGS_SHIFT (DESC_SV_BITS - 2) +#define DESC_FLAGS_MASK (3UL << DESC_FLAGS_SHIFT) +#define DESC_STATE(sv) (3UL & (sv >> DESC_FLAGS_SHIFT)) +#define DESC_SV(id, state) (((unsigned long)state << DESC_FLAGS_SHIFT) | id) +#define DESC_ID_MASK (~DESC_FLAGS_MASK) +#define DESC_ID(sv) ((sv) & DESC_ID_MASK) +#define FAILED_LPOS 0x1 +#define NO_LPOS 0x3 + +#define FAILED_BLK_LPOS \ +{ \ + .begin = FAILED_LPOS, \ + .next = FAILED_LPOS, \ +} + +/* + * Descriptor Bootstrap + * + * The descriptor array is minimally initialized to allow immediate usage + * by readers and writers. The requirements that the descriptor array + * initialization must satisfy: + * + * Req1 + * The tail must point to an existing (committed or reusable) descriptor. + * This is required by the implementation of prb_first_seq(). + * + * Req2 + * Readers must see that the ringbuffer is initially empty. + * + * Req3 + * The first record reserved by a writer is assigned sequence number 0. + * + * To satisfy Req1, the tail initially points to a descriptor that is + * minimally initialized (having no data block, i.e. data-less with the + * data block's lpos @begin and @next values set to FAILED_LPOS). + * + * To satisfy Req2, the initial tail descriptor is initialized to the + * reusable state. Readers recognize reusable descriptors as existing + * records, but skip over them. + * + * To satisfy Req3, the last descriptor in the array is used as the initial + * head (and tail) descriptor. This allows the first record reserved by a + * writer (head + 1) to be the first descriptor in the array. (Only the first + * descriptor in the array could have a valid sequence number of 0.) + * + * The first time a descriptor is reserved, it is assigned a sequence number + * with the value of the array index. A "first time reserved" descriptor can + * be recognized because it has a sequence number of 0 but does not have an + * index of 0. (Only the first descriptor in the array could have a valid + * sequence number of 0.) After the first reservation, all future reservations + * (recycling) simply involve incrementing the sequence number by the array + * count. + * + * Hack #1 + * Only the first descriptor in the array is allowed to have the sequence + * number 0. In this case it is not possible to recognize if it is being + * reserved the first time (set to index value) or has been reserved + * previously (increment by the array count). This is handled by _always_ + * incrementing the sequence number by the array count when reserving the + * first descriptor in the array. In order to satisfy Req3, the sequence + * number of the first descriptor in the array is initialized to minus + * the array count. Then, upon the first reservation, it is incremented + * to 0, thus satisfying Req3. + * + * Hack #2 + * prb_first_seq() can be called at any time by readers to retrieve the + * sequence number of the tail descriptor. However, due to Req2 and Req3, + * initially there are no records to report the sequence number of + * (sequence numbers are u64 and there is nothing less than 0). To handle + * this, the sequence number of the initial tail descriptor is initialized + * to 0. Technically this is incorrect, because there is no record with + * sequence number 0 (yet) and the tail descriptor is not the first + * descriptor in the array. But it allows prb_read_valid() to correctly + * report the existence of a record for _any_ given sequence number at all + * times. Bootstrapping is complete when the tail is pushed the first + * time, thus finally pointing to the first descriptor reserved by a + * writer, which has the assigned sequence number 0. + */ + +/* + * Initiating Logical Value Overflows + * + * Both logical position (lpos) and ID values can be mapped to array indexes + * but may experience overflows during the lifetime of the system. To ensure + * that printk_ringbuffer can handle the overflows for these types, initial + * values are chosen that map to the correct initial array indexes, but will + * result in overflows soon. + * + * BLK0_LPOS + * The initial @head_lpos and @tail_lpos for data rings. It is at index + * 0 and the lpos value is such that it will overflow on the first wrap. + * + * DESC0_ID + * The initial @head_id and @tail_id for the desc ring. It is at the last + * index of the descriptor array (see Req3 above) and the ID value is such + * that it will overflow on the second wrap. + */ +#define BLK0_LPOS(sz_bits) (-(_DATA_SIZE(sz_bits))) +#define DESC0_ID(ct_bits) DESC_ID(-(_DESCS_COUNT(ct_bits) + 1)) +#define DESC0_SV(ct_bits) DESC_SV(DESC0_ID(ct_bits), desc_reusable) + +/* + * Define a ringbuffer with an external text data buffer. The same as + * DEFINE_PRINTKRB() but requires specifying an external buffer for the + * text data. + * + * Note: The specified external buffer must be of the size: + * 2 ^ (descbits + avgtextbits) + */ +#define _DEFINE_PRINTKRB(name, descbits, avgtextbits, text_buf) \ +static struct prb_desc _##name##_descs[_DESCS_COUNT(descbits)] = { \ + /* the initial head and tail */ \ + [_DESCS_COUNT(descbits) - 1] = { \ + /* reusable */ \ + .state_var = ATOMIC_INIT(DESC0_SV(descbits)), \ + /* no associated data block */ \ + .text_blk_lpos = FAILED_BLK_LPOS, \ + }, \ +}; \ +static struct printk_info _##name##_infos[_DESCS_COUNT(descbits)] = { \ + /* this will be the first record reserved by a writer */ \ + [0] = { \ + /* will be incremented to 0 on the first reservation */ \ + .seq = -(u64)_DESCS_COUNT(descbits), \ + }, \ + /* the initial head and tail */ \ + [_DESCS_COUNT(descbits) - 1] = { \ + /* reports the first seq value during the bootstrap phase */ \ + .seq = 0, \ + }, \ +}; \ +static struct printk_ringbuffer name = { \ + .desc_ring = { \ + .count_bits = descbits, \ + .descs = &_##name##_descs[0], \ + .infos = &_##name##_infos[0], \ + .head_id = ATOMIC_INIT(DESC0_ID(descbits)), \ + .tail_id = ATOMIC_INIT(DESC0_ID(descbits)), \ + .last_finalized_id = ATOMIC_INIT(DESC0_ID(descbits)), \ + }, \ + .text_data_ring = { \ + .size_bits = (avgtextbits) + (descbits), \ + .data = text_buf, \ + .head_lpos = ATOMIC_LONG_INIT(BLK0_LPOS((avgtextbits) + (descbits))), \ + .tail_lpos = ATOMIC_LONG_INIT(BLK0_LPOS((avgtextbits) + (descbits))), \ + }, \ + .fail = ATOMIC_LONG_INIT(0), \ +} + +/** + * DEFINE_PRINTKRB() - Define a ringbuffer. + * + * @name: The name of the ringbuffer variable. + * @descbits: The number of descriptors as a power-of-2 value. + * @avgtextbits: The average text data size per record as a power-of-2 value. + * + * This is a macro for defining a ringbuffer and all internal structures + * such that it is ready for immediate use. See _DEFINE_PRINTKRB() for a + * variant where the text data buffer can be specified externally. + */ +#define DEFINE_PRINTKRB(name, descbits, avgtextbits) \ +static char _##name##_text[1U << ((avgtextbits) + (descbits))] \ + __aligned(__alignof__(unsigned long)); \ +_DEFINE_PRINTKRB(name, descbits, avgtextbits, &_##name##_text[0]) + +/* Writer Interface */ + +/** + * prb_rec_init_wr() - Initialize a buffer for writing records. + * + * @r: The record to initialize. + * @text_buf_size: The needed text buffer size. + */ +static inline void prb_rec_init_wr(struct printk_record *r, + unsigned int text_buf_size) +{ + r->info = NULL; + r->text_buf = NULL; + r->text_buf_size = text_buf_size; +} + +bool prb_reserve(struct prb_reserved_entry *e, struct printk_ringbuffer *rb, + struct printk_record *r); +bool prb_reserve_in_last(struct prb_reserved_entry *e, struct printk_ringbuffer *rb, + struct printk_record *r, u32 caller_id, unsigned int max_size); +void prb_commit(struct prb_reserved_entry *e); +void prb_final_commit(struct prb_reserved_entry *e); + +void prb_init(struct printk_ringbuffer *rb, + char *text_buf, unsigned int text_buf_size, + struct prb_desc *descs, unsigned int descs_count_bits, + struct printk_info *infos); +unsigned int prb_record_text_space(struct prb_reserved_entry *e); + +/* Reader Interface */ + +/** + * prb_rec_init_rd() - Initialize a buffer for reading records. + * + * @r: The record to initialize. + * @info: A buffer to store record meta-data. + * @text_buf: A buffer to store text data. + * @text_buf_size: The size of @text_buf. + * + * Initialize all the fields that a reader is interested in. All arguments + * (except @r) are optional. Only record data for arguments that are + * non-NULL or non-zero will be read. + */ +static inline void prb_rec_init_rd(struct printk_record *r, + struct printk_info *info, + char *text_buf, unsigned int text_buf_size) +{ + r->info = info; + r->text_buf = text_buf; + r->text_buf_size = text_buf_size; +} + +/** + * prb_for_each_record() - Iterate over the records of a ringbuffer. + * + * @from: The sequence number to begin with. + * @rb: The ringbuffer to iterate over. + * @s: A u64 to store the sequence number on each iteration. + * @r: A printk_record to store the record on each iteration. + * + * This is a macro for conveniently iterating over a ringbuffer. + * Note that @s may not be the sequence number of the record on each + * iteration. For the sequence number, @r->info->seq should be checked. + * + * Context: Any context. + */ +#define prb_for_each_record(from, rb, s, r) \ +for ((s) = from; prb_read_valid(rb, s, r); (s) = (r)->info->seq + 1) + +/** + * prb_for_each_info() - Iterate over the meta data of a ringbuffer. + * + * @from: The sequence number to begin with. + * @rb: The ringbuffer to iterate over. + * @s: A u64 to store the sequence number on each iteration. + * @i: A printk_info to store the record meta data on each iteration. + * @lc: An unsigned int to store the text line count of each record. + * + * This is a macro for conveniently iterating over a ringbuffer. + * Note that @s may not be the sequence number of the record on each + * iteration. For the sequence number, @r->info->seq should be checked. + * + * Context: Any context. + */ +#define prb_for_each_info(from, rb, s, i, lc) \ +for ((s) = from; prb_read_valid_info(rb, s, i, lc); (s) = (i)->seq + 1) + +bool prb_read_valid(struct printk_ringbuffer *rb, u64 seq, + struct printk_record *r); +bool prb_read_valid_info(struct printk_ringbuffer *rb, u64 seq, + struct printk_info *info, unsigned int *line_count); + +u64 prb_first_valid_seq(struct printk_ringbuffer *rb); +u64 prb_next_seq(struct printk_ringbuffer *rb); + +#endif /* _KERNEL_PRINTK_RINGBUFFER_H */ |