summaryrefslogtreecommitdiffstats
path: root/net/ipv4/tcp_bbr.c
diff options
context:
space:
mode:
Diffstat (limited to 'net/ipv4/tcp_bbr.c')
-rw-r--r--net/ipv4/tcp_bbr.c1202
1 files changed, 1202 insertions, 0 deletions
diff --git a/net/ipv4/tcp_bbr.c b/net/ipv4/tcp_bbr.c
new file mode 100644
index 000000000..54eec33c6
--- /dev/null
+++ b/net/ipv4/tcp_bbr.c
@@ -0,0 +1,1202 @@
+/* Bottleneck Bandwidth and RTT (BBR) congestion control
+ *
+ * BBR congestion control computes the sending rate based on the delivery
+ * rate (throughput) estimated from ACKs. In a nutshell:
+ *
+ * On each ACK, update our model of the network path:
+ * bottleneck_bandwidth = windowed_max(delivered / elapsed, 10 round trips)
+ * min_rtt = windowed_min(rtt, 10 seconds)
+ * pacing_rate = pacing_gain * bottleneck_bandwidth
+ * cwnd = max(cwnd_gain * bottleneck_bandwidth * min_rtt, 4)
+ *
+ * The core algorithm does not react directly to packet losses or delays,
+ * although BBR may adjust the size of next send per ACK when loss is
+ * observed, or adjust the sending rate if it estimates there is a
+ * traffic policer, in order to keep the drop rate reasonable.
+ *
+ * Here is a state transition diagram for BBR:
+ *
+ * |
+ * V
+ * +---> STARTUP ----+
+ * | | |
+ * | V |
+ * | DRAIN ----+
+ * | | |
+ * | V |
+ * +---> PROBE_BW ----+
+ * | ^ | |
+ * | | | |
+ * | +----+ |
+ * | |
+ * +---- PROBE_RTT <--+
+ *
+ * A BBR flow starts in STARTUP, and ramps up its sending rate quickly.
+ * When it estimates the pipe is full, it enters DRAIN to drain the queue.
+ * In steady state a BBR flow only uses PROBE_BW and PROBE_RTT.
+ * A long-lived BBR flow spends the vast majority of its time remaining
+ * (repeatedly) in PROBE_BW, fully probing and utilizing the pipe's bandwidth
+ * in a fair manner, with a small, bounded queue. *If* a flow has been
+ * continuously sending for the entire min_rtt window, and hasn't seen an RTT
+ * sample that matches or decreases its min_rtt estimate for 10 seconds, then
+ * it briefly enters PROBE_RTT to cut inflight to a minimum value to re-probe
+ * the path's two-way propagation delay (min_rtt). When exiting PROBE_RTT, if
+ * we estimated that we reached the full bw of the pipe then we enter PROBE_BW;
+ * otherwise we enter STARTUP to try to fill the pipe.
+ *
+ * BBR is described in detail in:
+ * "BBR: Congestion-Based Congestion Control",
+ * Neal Cardwell, Yuchung Cheng, C. Stephen Gunn, Soheil Hassas Yeganeh,
+ * Van Jacobson. ACM Queue, Vol. 14 No. 5, September-October 2016.
+ *
+ * There is a public e-mail list for discussing BBR development and testing:
+ * https://groups.google.com/forum/#!forum/bbr-dev
+ *
+ * NOTE: BBR might be used with the fq qdisc ("man tc-fq") with pacing enabled,
+ * otherwise TCP stack falls back to an internal pacing using one high
+ * resolution timer per TCP socket and may use more resources.
+ */
+#include <linux/btf.h>
+#include <linux/btf_ids.h>
+#include <linux/module.h>
+#include <net/tcp.h>
+#include <linux/inet_diag.h>
+#include <linux/inet.h>
+#include <linux/random.h>
+#include <linux/win_minmax.h>
+
+/* Scale factor for rate in pkt/uSec unit to avoid truncation in bandwidth
+ * estimation. The rate unit ~= (1500 bytes / 1 usec / 2^24) ~= 715 bps.
+ * This handles bandwidths from 0.06pps (715bps) to 256Mpps (3Tbps) in a u32.
+ * Since the minimum window is >=4 packets, the lower bound isn't
+ * an issue. The upper bound isn't an issue with existing technologies.
+ */
+#define BW_SCALE 24
+#define BW_UNIT (1 << BW_SCALE)
+
+#define BBR_SCALE 8 /* scaling factor for fractions in BBR (e.g. gains) */
+#define BBR_UNIT (1 << BBR_SCALE)
+
+/* BBR has the following modes for deciding how fast to send: */
+enum bbr_mode {
+ BBR_STARTUP, /* ramp up sending rate rapidly to fill pipe */
+ BBR_DRAIN, /* drain any queue created during startup */
+ BBR_PROBE_BW, /* discover, share bw: pace around estimated bw */
+ BBR_PROBE_RTT, /* cut inflight to min to probe min_rtt */
+};
+
+/* BBR congestion control block */
+struct bbr {
+ u32 min_rtt_us; /* min RTT in min_rtt_win_sec window */
+ u32 min_rtt_stamp; /* timestamp of min_rtt_us */
+ u32 probe_rtt_done_stamp; /* end time for BBR_PROBE_RTT mode */
+ struct minmax bw; /* Max recent delivery rate in pkts/uS << 24 */
+ u32 rtt_cnt; /* count of packet-timed rounds elapsed */
+ u32 next_rtt_delivered; /* scb->tx.delivered at end of round */
+ u64 cycle_mstamp; /* time of this cycle phase start */
+ u32 mode:3, /* current bbr_mode in state machine */
+ prev_ca_state:3, /* CA state on previous ACK */
+ packet_conservation:1, /* use packet conservation? */
+ round_start:1, /* start of packet-timed tx->ack round? */
+ idle_restart:1, /* restarting after idle? */
+ probe_rtt_round_done:1, /* a BBR_PROBE_RTT round at 4 pkts? */
+ unused:13,
+ lt_is_sampling:1, /* taking long-term ("LT") samples now? */
+ lt_rtt_cnt:7, /* round trips in long-term interval */
+ lt_use_bw:1; /* use lt_bw as our bw estimate? */
+ u32 lt_bw; /* LT est delivery rate in pkts/uS << 24 */
+ u32 lt_last_delivered; /* LT intvl start: tp->delivered */
+ u32 lt_last_stamp; /* LT intvl start: tp->delivered_mstamp */
+ u32 lt_last_lost; /* LT intvl start: tp->lost */
+ u32 pacing_gain:10, /* current gain for setting pacing rate */
+ cwnd_gain:10, /* current gain for setting cwnd */
+ full_bw_reached:1, /* reached full bw in Startup? */
+ full_bw_cnt:2, /* number of rounds without large bw gains */
+ cycle_idx:3, /* current index in pacing_gain cycle array */
+ has_seen_rtt:1, /* have we seen an RTT sample yet? */
+ unused_b:5;
+ u32 prior_cwnd; /* prior cwnd upon entering loss recovery */
+ u32 full_bw; /* recent bw, to estimate if pipe is full */
+
+ /* For tracking ACK aggregation: */
+ u64 ack_epoch_mstamp; /* start of ACK sampling epoch */
+ u16 extra_acked[2]; /* max excess data ACKed in epoch */
+ u32 ack_epoch_acked:20, /* packets (S)ACKed in sampling epoch */
+ extra_acked_win_rtts:5, /* age of extra_acked, in round trips */
+ extra_acked_win_idx:1, /* current index in extra_acked array */
+ unused_c:6;
+};
+
+#define CYCLE_LEN 8 /* number of phases in a pacing gain cycle */
+
+/* Window length of bw filter (in rounds): */
+static const int bbr_bw_rtts = CYCLE_LEN + 2;
+/* Window length of min_rtt filter (in sec): */
+static const u32 bbr_min_rtt_win_sec = 10;
+/* Minimum time (in ms) spent at bbr_cwnd_min_target in BBR_PROBE_RTT mode: */
+static const u32 bbr_probe_rtt_mode_ms = 200;
+/* Skip TSO below the following bandwidth (bits/sec): */
+static const int bbr_min_tso_rate = 1200000;
+
+/* Pace at ~1% below estimated bw, on average, to reduce queue at bottleneck.
+ * In order to help drive the network toward lower queues and low latency while
+ * maintaining high utilization, the average pacing rate aims to be slightly
+ * lower than the estimated bandwidth. This is an important aspect of the
+ * design.
+ */
+static const int bbr_pacing_margin_percent = 1;
+
+/* We use a high_gain value of 2/ln(2) because it's the smallest pacing gain
+ * that will allow a smoothly increasing pacing rate that will double each RTT
+ * and send the same number of packets per RTT that an un-paced, slow-starting
+ * Reno or CUBIC flow would:
+ */
+static const int bbr_high_gain = BBR_UNIT * 2885 / 1000 + 1;
+/* The pacing gain of 1/high_gain in BBR_DRAIN is calculated to typically drain
+ * the queue created in BBR_STARTUP in a single round:
+ */
+static const int bbr_drain_gain = BBR_UNIT * 1000 / 2885;
+/* The gain for deriving steady-state cwnd tolerates delayed/stretched ACKs: */
+static const int bbr_cwnd_gain = BBR_UNIT * 2;
+/* The pacing_gain values for the PROBE_BW gain cycle, to discover/share bw: */
+static const int bbr_pacing_gain[] = {
+ BBR_UNIT * 5 / 4, /* probe for more available bw */
+ BBR_UNIT * 3 / 4, /* drain queue and/or yield bw to other flows */
+ BBR_UNIT, BBR_UNIT, BBR_UNIT, /* cruise at 1.0*bw to utilize pipe, */
+ BBR_UNIT, BBR_UNIT, BBR_UNIT /* without creating excess queue... */
+};
+/* Randomize the starting gain cycling phase over N phases: */
+static const u32 bbr_cycle_rand = 7;
+
+/* Try to keep at least this many packets in flight, if things go smoothly. For
+ * smooth functioning, a sliding window protocol ACKing every other packet
+ * needs at least 4 packets in flight:
+ */
+static const u32 bbr_cwnd_min_target = 4;
+
+/* To estimate if BBR_STARTUP mode (i.e. high_gain) has filled pipe... */
+/* If bw has increased significantly (1.25x), there may be more bw available: */
+static const u32 bbr_full_bw_thresh = BBR_UNIT * 5 / 4;
+/* But after 3 rounds w/o significant bw growth, estimate pipe is full: */
+static const u32 bbr_full_bw_cnt = 3;
+
+/* "long-term" ("LT") bandwidth estimator parameters... */
+/* The minimum number of rounds in an LT bw sampling interval: */
+static const u32 bbr_lt_intvl_min_rtts = 4;
+/* If lost/delivered ratio > 20%, interval is "lossy" and we may be policed: */
+static const u32 bbr_lt_loss_thresh = 50;
+/* If 2 intervals have a bw ratio <= 1/8, their bw is "consistent": */
+static const u32 bbr_lt_bw_ratio = BBR_UNIT / 8;
+/* If 2 intervals have a bw diff <= 4 Kbit/sec their bw is "consistent": */
+static const u32 bbr_lt_bw_diff = 4000 / 8;
+/* If we estimate we're policed, use lt_bw for this many round trips: */
+static const u32 bbr_lt_bw_max_rtts = 48;
+
+/* Gain factor for adding extra_acked to target cwnd: */
+static const int bbr_extra_acked_gain = BBR_UNIT;
+/* Window length of extra_acked window. */
+static const u32 bbr_extra_acked_win_rtts = 5;
+/* Max allowed val for ack_epoch_acked, after which sampling epoch is reset */
+static const u32 bbr_ack_epoch_acked_reset_thresh = 1U << 20;
+/* Time period for clamping cwnd increment due to ack aggregation */
+static const u32 bbr_extra_acked_max_us = 100 * 1000;
+
+static void bbr_check_probe_rtt_done(struct sock *sk);
+
+/* Do we estimate that STARTUP filled the pipe? */
+static bool bbr_full_bw_reached(const struct sock *sk)
+{
+ const struct bbr *bbr = inet_csk_ca(sk);
+
+ return bbr->full_bw_reached;
+}
+
+/* Return the windowed max recent bandwidth sample, in pkts/uS << BW_SCALE. */
+static u32 bbr_max_bw(const struct sock *sk)
+{
+ struct bbr *bbr = inet_csk_ca(sk);
+
+ return minmax_get(&bbr->bw);
+}
+
+/* Return the estimated bandwidth of the path, in pkts/uS << BW_SCALE. */
+static u32 bbr_bw(const struct sock *sk)
+{
+ struct bbr *bbr = inet_csk_ca(sk);
+
+ return bbr->lt_use_bw ? bbr->lt_bw : bbr_max_bw(sk);
+}
+
+/* Return maximum extra acked in past k-2k round trips,
+ * where k = bbr_extra_acked_win_rtts.
+ */
+static u16 bbr_extra_acked(const struct sock *sk)
+{
+ struct bbr *bbr = inet_csk_ca(sk);
+
+ return max(bbr->extra_acked[0], bbr->extra_acked[1]);
+}
+
+/* Return rate in bytes per second, optionally with a gain.
+ * The order here is chosen carefully to avoid overflow of u64. This should
+ * work for input rates of up to 2.9Tbit/sec and gain of 2.89x.
+ */
+static u64 bbr_rate_bytes_per_sec(struct sock *sk, u64 rate, int gain)
+{
+ unsigned int mss = tcp_sk(sk)->mss_cache;
+
+ rate *= mss;
+ rate *= gain;
+ rate >>= BBR_SCALE;
+ rate *= USEC_PER_SEC / 100 * (100 - bbr_pacing_margin_percent);
+ return rate >> BW_SCALE;
+}
+
+/* Convert a BBR bw and gain factor to a pacing rate in bytes per second. */
+static unsigned long bbr_bw_to_pacing_rate(struct sock *sk, u32 bw, int gain)
+{
+ u64 rate = bw;
+
+ rate = bbr_rate_bytes_per_sec(sk, rate, gain);
+ rate = min_t(u64, rate, sk->sk_max_pacing_rate);
+ return rate;
+}
+
+/* Initialize pacing rate to: high_gain * init_cwnd / RTT. */
+static void bbr_init_pacing_rate_from_rtt(struct sock *sk)
+{
+ struct tcp_sock *tp = tcp_sk(sk);
+ struct bbr *bbr = inet_csk_ca(sk);
+ u64 bw;
+ u32 rtt_us;
+
+ if (tp->srtt_us) { /* any RTT sample yet? */
+ rtt_us = max(tp->srtt_us >> 3, 1U);
+ bbr->has_seen_rtt = 1;
+ } else { /* no RTT sample yet */
+ rtt_us = USEC_PER_MSEC; /* use nominal default RTT */
+ }
+ bw = (u64)tcp_snd_cwnd(tp) * BW_UNIT;
+ do_div(bw, rtt_us);
+ sk->sk_pacing_rate = bbr_bw_to_pacing_rate(sk, bw, bbr_high_gain);
+}
+
+/* Pace using current bw estimate and a gain factor. */
+static void bbr_set_pacing_rate(struct sock *sk, u32 bw, int gain)
+{
+ struct tcp_sock *tp = tcp_sk(sk);
+ struct bbr *bbr = inet_csk_ca(sk);
+ unsigned long rate = bbr_bw_to_pacing_rate(sk, bw, gain);
+
+ if (unlikely(!bbr->has_seen_rtt && tp->srtt_us))
+ bbr_init_pacing_rate_from_rtt(sk);
+ if (bbr_full_bw_reached(sk) || rate > sk->sk_pacing_rate)
+ sk->sk_pacing_rate = rate;
+}
+
+/* override sysctl_tcp_min_tso_segs */
+static u32 bbr_min_tso_segs(struct sock *sk)
+{
+ return sk->sk_pacing_rate < (bbr_min_tso_rate >> 3) ? 1 : 2;
+}
+
+static u32 bbr_tso_segs_goal(struct sock *sk)
+{
+ struct tcp_sock *tp = tcp_sk(sk);
+ u32 segs, bytes;
+
+ /* Sort of tcp_tso_autosize() but ignoring
+ * driver provided sk_gso_max_size.
+ */
+ bytes = min_t(unsigned long,
+ sk->sk_pacing_rate >> READ_ONCE(sk->sk_pacing_shift),
+ GSO_LEGACY_MAX_SIZE - 1 - MAX_TCP_HEADER);
+ segs = max_t(u32, bytes / tp->mss_cache, bbr_min_tso_segs(sk));
+
+ return min(segs, 0x7FU);
+}
+
+/* Save "last known good" cwnd so we can restore it after losses or PROBE_RTT */
+static void bbr_save_cwnd(struct sock *sk)
+{
+ struct tcp_sock *tp = tcp_sk(sk);
+ struct bbr *bbr = inet_csk_ca(sk);
+
+ if (bbr->prev_ca_state < TCP_CA_Recovery && bbr->mode != BBR_PROBE_RTT)
+ bbr->prior_cwnd = tcp_snd_cwnd(tp); /* this cwnd is good enough */
+ else /* loss recovery or BBR_PROBE_RTT have temporarily cut cwnd */
+ bbr->prior_cwnd = max(bbr->prior_cwnd, tcp_snd_cwnd(tp));
+}
+
+static void bbr_cwnd_event(struct sock *sk, enum tcp_ca_event event)
+{
+ struct tcp_sock *tp = tcp_sk(sk);
+ struct bbr *bbr = inet_csk_ca(sk);
+
+ if (event == CA_EVENT_TX_START && tp->app_limited) {
+ bbr->idle_restart = 1;
+ bbr->ack_epoch_mstamp = tp->tcp_mstamp;
+ bbr->ack_epoch_acked = 0;
+ /* Avoid pointless buffer overflows: pace at est. bw if we don't
+ * need more speed (we're restarting from idle and app-limited).
+ */
+ if (bbr->mode == BBR_PROBE_BW)
+ bbr_set_pacing_rate(sk, bbr_bw(sk), BBR_UNIT);
+ else if (bbr->mode == BBR_PROBE_RTT)
+ bbr_check_probe_rtt_done(sk);
+ }
+}
+
+/* Calculate bdp based on min RTT and the estimated bottleneck bandwidth:
+ *
+ * bdp = ceil(bw * min_rtt * gain)
+ *
+ * The key factor, gain, controls the amount of queue. While a small gain
+ * builds a smaller queue, it becomes more vulnerable to noise in RTT
+ * measurements (e.g., delayed ACKs or other ACK compression effects). This
+ * noise may cause BBR to under-estimate the rate.
+ */
+static u32 bbr_bdp(struct sock *sk, u32 bw, int gain)
+{
+ struct bbr *bbr = inet_csk_ca(sk);
+ u32 bdp;
+ u64 w;
+
+ /* If we've never had a valid RTT sample, cap cwnd at the initial
+ * default. This should only happen when the connection is not using TCP
+ * timestamps and has retransmitted all of the SYN/SYNACK/data packets
+ * ACKed so far. In this case, an RTO can cut cwnd to 1, in which
+ * case we need to slow-start up toward something safe: TCP_INIT_CWND.
+ */
+ if (unlikely(bbr->min_rtt_us == ~0U)) /* no valid RTT samples yet? */
+ return TCP_INIT_CWND; /* be safe: cap at default initial cwnd*/
+
+ w = (u64)bw * bbr->min_rtt_us;
+
+ /* Apply a gain to the given value, remove the BW_SCALE shift, and
+ * round the value up to avoid a negative feedback loop.
+ */
+ bdp = (((w * gain) >> BBR_SCALE) + BW_UNIT - 1) / BW_UNIT;
+
+ return bdp;
+}
+
+/* To achieve full performance in high-speed paths, we budget enough cwnd to
+ * fit full-sized skbs in-flight on both end hosts to fully utilize the path:
+ * - one skb in sending host Qdisc,
+ * - one skb in sending host TSO/GSO engine
+ * - one skb being received by receiver host LRO/GRO/delayed-ACK engine
+ * Don't worry, at low rates (bbr_min_tso_rate) this won't bloat cwnd because
+ * in such cases tso_segs_goal is 1. The minimum cwnd is 4 packets,
+ * which allows 2 outstanding 2-packet sequences, to try to keep pipe
+ * full even with ACK-every-other-packet delayed ACKs.
+ */
+static u32 bbr_quantization_budget(struct sock *sk, u32 cwnd)
+{
+ struct bbr *bbr = inet_csk_ca(sk);
+
+ /* Allow enough full-sized skbs in flight to utilize end systems. */
+ cwnd += 3 * bbr_tso_segs_goal(sk);
+
+ /* Reduce delayed ACKs by rounding up cwnd to the next even number. */
+ cwnd = (cwnd + 1) & ~1U;
+
+ /* Ensure gain cycling gets inflight above BDP even for small BDPs. */
+ if (bbr->mode == BBR_PROBE_BW && bbr->cycle_idx == 0)
+ cwnd += 2;
+
+ return cwnd;
+}
+
+/* Find inflight based on min RTT and the estimated bottleneck bandwidth. */
+static u32 bbr_inflight(struct sock *sk, u32 bw, int gain)
+{
+ u32 inflight;
+
+ inflight = bbr_bdp(sk, bw, gain);
+ inflight = bbr_quantization_budget(sk, inflight);
+
+ return inflight;
+}
+
+/* With pacing at lower layers, there's often less data "in the network" than
+ * "in flight". With TSQ and departure time pacing at lower layers (e.g. fq),
+ * we often have several skbs queued in the pacing layer with a pre-scheduled
+ * earliest departure time (EDT). BBR adapts its pacing rate based on the
+ * inflight level that it estimates has already been "baked in" by previous
+ * departure time decisions. We calculate a rough estimate of the number of our
+ * packets that might be in the network at the earliest departure time for the
+ * next skb scheduled:
+ * in_network_at_edt = inflight_at_edt - (EDT - now) * bw
+ * If we're increasing inflight, then we want to know if the transmit of the
+ * EDT skb will push inflight above the target, so inflight_at_edt includes
+ * bbr_tso_segs_goal() from the skb departing at EDT. If decreasing inflight,
+ * then estimate if inflight will sink too low just before the EDT transmit.
+ */
+static u32 bbr_packets_in_net_at_edt(struct sock *sk, u32 inflight_now)
+{
+ struct tcp_sock *tp = tcp_sk(sk);
+ struct bbr *bbr = inet_csk_ca(sk);
+ u64 now_ns, edt_ns, interval_us;
+ u32 interval_delivered, inflight_at_edt;
+
+ now_ns = tp->tcp_clock_cache;
+ edt_ns = max(tp->tcp_wstamp_ns, now_ns);
+ interval_us = div_u64(edt_ns - now_ns, NSEC_PER_USEC);
+ interval_delivered = (u64)bbr_bw(sk) * interval_us >> BW_SCALE;
+ inflight_at_edt = inflight_now;
+ if (bbr->pacing_gain > BBR_UNIT) /* increasing inflight */
+ inflight_at_edt += bbr_tso_segs_goal(sk); /* include EDT skb */
+ if (interval_delivered >= inflight_at_edt)
+ return 0;
+ return inflight_at_edt - interval_delivered;
+}
+
+/* Find the cwnd increment based on estimate of ack aggregation */
+static u32 bbr_ack_aggregation_cwnd(struct sock *sk)
+{
+ u32 max_aggr_cwnd, aggr_cwnd = 0;
+
+ if (bbr_extra_acked_gain && bbr_full_bw_reached(sk)) {
+ max_aggr_cwnd = ((u64)bbr_bw(sk) * bbr_extra_acked_max_us)
+ / BW_UNIT;
+ aggr_cwnd = (bbr_extra_acked_gain * bbr_extra_acked(sk))
+ >> BBR_SCALE;
+ aggr_cwnd = min(aggr_cwnd, max_aggr_cwnd);
+ }
+
+ return aggr_cwnd;
+}
+
+/* An optimization in BBR to reduce losses: On the first round of recovery, we
+ * follow the packet conservation principle: send P packets per P packets acked.
+ * After that, we slow-start and send at most 2*P packets per P packets acked.
+ * After recovery finishes, or upon undo, we restore the cwnd we had when
+ * recovery started (capped by the target cwnd based on estimated BDP).
+ *
+ * TODO(ycheng/ncardwell): implement a rate-based approach.
+ */
+static bool bbr_set_cwnd_to_recover_or_restore(
+ struct sock *sk, const struct rate_sample *rs, u32 acked, u32 *new_cwnd)
+{
+ struct tcp_sock *tp = tcp_sk(sk);
+ struct bbr *bbr = inet_csk_ca(sk);
+ u8 prev_state = bbr->prev_ca_state, state = inet_csk(sk)->icsk_ca_state;
+ u32 cwnd = tcp_snd_cwnd(tp);
+
+ /* An ACK for P pkts should release at most 2*P packets. We do this
+ * in two steps. First, here we deduct the number of lost packets.
+ * Then, in bbr_set_cwnd() we slow start up toward the target cwnd.
+ */
+ if (rs->losses > 0)
+ cwnd = max_t(s32, cwnd - rs->losses, 1);
+
+ if (state == TCP_CA_Recovery && prev_state != TCP_CA_Recovery) {
+ /* Starting 1st round of Recovery, so do packet conservation. */
+ bbr->packet_conservation = 1;
+ bbr->next_rtt_delivered = tp->delivered; /* start round now */
+ /* Cut unused cwnd from app behavior, TSQ, or TSO deferral: */
+ cwnd = tcp_packets_in_flight(tp) + acked;
+ } else if (prev_state >= TCP_CA_Recovery && state < TCP_CA_Recovery) {
+ /* Exiting loss recovery; restore cwnd saved before recovery. */
+ cwnd = max(cwnd, bbr->prior_cwnd);
+ bbr->packet_conservation = 0;
+ }
+ bbr->prev_ca_state = state;
+
+ if (bbr->packet_conservation) {
+ *new_cwnd = max(cwnd, tcp_packets_in_flight(tp) + acked);
+ return true; /* yes, using packet conservation */
+ }
+ *new_cwnd = cwnd;
+ return false;
+}
+
+/* Slow-start up toward target cwnd (if bw estimate is growing, or packet loss
+ * has drawn us down below target), or snap down to target if we're above it.
+ */
+static void bbr_set_cwnd(struct sock *sk, const struct rate_sample *rs,
+ u32 acked, u32 bw, int gain)
+{
+ struct tcp_sock *tp = tcp_sk(sk);
+ struct bbr *bbr = inet_csk_ca(sk);
+ u32 cwnd = tcp_snd_cwnd(tp), target_cwnd = 0;
+
+ if (!acked)
+ goto done; /* no packet fully ACKed; just apply caps */
+
+ if (bbr_set_cwnd_to_recover_or_restore(sk, rs, acked, &cwnd))
+ goto done;
+
+ target_cwnd = bbr_bdp(sk, bw, gain);
+
+ /* Increment the cwnd to account for excess ACKed data that seems
+ * due to aggregation (of data and/or ACKs) visible in the ACK stream.
+ */
+ target_cwnd += bbr_ack_aggregation_cwnd(sk);
+ target_cwnd = bbr_quantization_budget(sk, target_cwnd);
+
+ /* If we're below target cwnd, slow start cwnd toward target cwnd. */
+ if (bbr_full_bw_reached(sk)) /* only cut cwnd if we filled the pipe */
+ cwnd = min(cwnd + acked, target_cwnd);
+ else if (cwnd < target_cwnd || tp->delivered < TCP_INIT_CWND)
+ cwnd = cwnd + acked;
+ cwnd = max(cwnd, bbr_cwnd_min_target);
+
+done:
+ tcp_snd_cwnd_set(tp, min(cwnd, tp->snd_cwnd_clamp)); /* apply global cap */
+ if (bbr->mode == BBR_PROBE_RTT) /* drain queue, refresh min_rtt */
+ tcp_snd_cwnd_set(tp, min(tcp_snd_cwnd(tp), bbr_cwnd_min_target));
+}
+
+/* End cycle phase if it's time and/or we hit the phase's in-flight target. */
+static bool bbr_is_next_cycle_phase(struct sock *sk,
+ const struct rate_sample *rs)
+{
+ struct tcp_sock *tp = tcp_sk(sk);
+ struct bbr *bbr = inet_csk_ca(sk);
+ bool is_full_length =
+ tcp_stamp_us_delta(tp->delivered_mstamp, bbr->cycle_mstamp) >
+ bbr->min_rtt_us;
+ u32 inflight, bw;
+
+ /* The pacing_gain of 1.0 paces at the estimated bw to try to fully
+ * use the pipe without increasing the queue.
+ */
+ if (bbr->pacing_gain == BBR_UNIT)
+ return is_full_length; /* just use wall clock time */
+
+ inflight = bbr_packets_in_net_at_edt(sk, rs->prior_in_flight);
+ bw = bbr_max_bw(sk);
+
+ /* A pacing_gain > 1.0 probes for bw by trying to raise inflight to at
+ * least pacing_gain*BDP; this may take more than min_rtt if min_rtt is
+ * small (e.g. on a LAN). We do not persist if packets are lost, since
+ * a path with small buffers may not hold that much.
+ */
+ if (bbr->pacing_gain > BBR_UNIT)
+ return is_full_length &&
+ (rs->losses || /* perhaps pacing_gain*BDP won't fit */
+ inflight >= bbr_inflight(sk, bw, bbr->pacing_gain));
+
+ /* A pacing_gain < 1.0 tries to drain extra queue we added if bw
+ * probing didn't find more bw. If inflight falls to match BDP then we
+ * estimate queue is drained; persisting would underutilize the pipe.
+ */
+ return is_full_length ||
+ inflight <= bbr_inflight(sk, bw, BBR_UNIT);
+}
+
+static void bbr_advance_cycle_phase(struct sock *sk)
+{
+ struct tcp_sock *tp = tcp_sk(sk);
+ struct bbr *bbr = inet_csk_ca(sk);
+
+ bbr->cycle_idx = (bbr->cycle_idx + 1) & (CYCLE_LEN - 1);
+ bbr->cycle_mstamp = tp->delivered_mstamp;
+}
+
+/* Gain cycling: cycle pacing gain to converge to fair share of available bw. */
+static void bbr_update_cycle_phase(struct sock *sk,
+ const struct rate_sample *rs)
+{
+ struct bbr *bbr = inet_csk_ca(sk);
+
+ if (bbr->mode == BBR_PROBE_BW && bbr_is_next_cycle_phase(sk, rs))
+ bbr_advance_cycle_phase(sk);
+}
+
+static void bbr_reset_startup_mode(struct sock *sk)
+{
+ struct bbr *bbr = inet_csk_ca(sk);
+
+ bbr->mode = BBR_STARTUP;
+}
+
+static void bbr_reset_probe_bw_mode(struct sock *sk)
+{
+ struct bbr *bbr = inet_csk_ca(sk);
+
+ bbr->mode = BBR_PROBE_BW;
+ bbr->cycle_idx = CYCLE_LEN - 1 - prandom_u32_max(bbr_cycle_rand);
+ bbr_advance_cycle_phase(sk); /* flip to next phase of gain cycle */
+}
+
+static void bbr_reset_mode(struct sock *sk)
+{
+ if (!bbr_full_bw_reached(sk))
+ bbr_reset_startup_mode(sk);
+ else
+ bbr_reset_probe_bw_mode(sk);
+}
+
+/* Start a new long-term sampling interval. */
+static void bbr_reset_lt_bw_sampling_interval(struct sock *sk)
+{
+ struct tcp_sock *tp = tcp_sk(sk);
+ struct bbr *bbr = inet_csk_ca(sk);
+
+ bbr->lt_last_stamp = div_u64(tp->delivered_mstamp, USEC_PER_MSEC);
+ bbr->lt_last_delivered = tp->delivered;
+ bbr->lt_last_lost = tp->lost;
+ bbr->lt_rtt_cnt = 0;
+}
+
+/* Completely reset long-term bandwidth sampling. */
+static void bbr_reset_lt_bw_sampling(struct sock *sk)
+{
+ struct bbr *bbr = inet_csk_ca(sk);
+
+ bbr->lt_bw = 0;
+ bbr->lt_use_bw = 0;
+ bbr->lt_is_sampling = false;
+ bbr_reset_lt_bw_sampling_interval(sk);
+}
+
+/* Long-term bw sampling interval is done. Estimate whether we're policed. */
+static void bbr_lt_bw_interval_done(struct sock *sk, u32 bw)
+{
+ struct bbr *bbr = inet_csk_ca(sk);
+ u32 diff;
+
+ if (bbr->lt_bw) { /* do we have bw from a previous interval? */
+ /* Is new bw close to the lt_bw from the previous interval? */
+ diff = abs(bw - bbr->lt_bw);
+ if ((diff * BBR_UNIT <= bbr_lt_bw_ratio * bbr->lt_bw) ||
+ (bbr_rate_bytes_per_sec(sk, diff, BBR_UNIT) <=
+ bbr_lt_bw_diff)) {
+ /* All criteria are met; estimate we're policed. */
+ bbr->lt_bw = (bw + bbr->lt_bw) >> 1; /* avg 2 intvls */
+ bbr->lt_use_bw = 1;
+ bbr->pacing_gain = BBR_UNIT; /* try to avoid drops */
+ bbr->lt_rtt_cnt = 0;
+ return;
+ }
+ }
+ bbr->lt_bw = bw;
+ bbr_reset_lt_bw_sampling_interval(sk);
+}
+
+/* Token-bucket traffic policers are common (see "An Internet-Wide Analysis of
+ * Traffic Policing", SIGCOMM 2016). BBR detects token-bucket policers and
+ * explicitly models their policed rate, to reduce unnecessary losses. We
+ * estimate that we're policed if we see 2 consecutive sampling intervals with
+ * consistent throughput and high packet loss. If we think we're being policed,
+ * set lt_bw to the "long-term" average delivery rate from those 2 intervals.
+ */
+static void bbr_lt_bw_sampling(struct sock *sk, const struct rate_sample *rs)
+{
+ struct tcp_sock *tp = tcp_sk(sk);
+ struct bbr *bbr = inet_csk_ca(sk);
+ u32 lost, delivered;
+ u64 bw;
+ u32 t;
+
+ if (bbr->lt_use_bw) { /* already using long-term rate, lt_bw? */
+ if (bbr->mode == BBR_PROBE_BW && bbr->round_start &&
+ ++bbr->lt_rtt_cnt >= bbr_lt_bw_max_rtts) {
+ bbr_reset_lt_bw_sampling(sk); /* stop using lt_bw */
+ bbr_reset_probe_bw_mode(sk); /* restart gain cycling */
+ }
+ return;
+ }
+
+ /* Wait for the first loss before sampling, to let the policer exhaust
+ * its tokens and estimate the steady-state rate allowed by the policer.
+ * Starting samples earlier includes bursts that over-estimate the bw.
+ */
+ if (!bbr->lt_is_sampling) {
+ if (!rs->losses)
+ return;
+ bbr_reset_lt_bw_sampling_interval(sk);
+ bbr->lt_is_sampling = true;
+ }
+
+ /* To avoid underestimates, reset sampling if we run out of data. */
+ if (rs->is_app_limited) {
+ bbr_reset_lt_bw_sampling(sk);
+ return;
+ }
+
+ if (bbr->round_start)
+ bbr->lt_rtt_cnt++; /* count round trips in this interval */
+ if (bbr->lt_rtt_cnt < bbr_lt_intvl_min_rtts)
+ return; /* sampling interval needs to be longer */
+ if (bbr->lt_rtt_cnt > 4 * bbr_lt_intvl_min_rtts) {
+ bbr_reset_lt_bw_sampling(sk); /* interval is too long */
+ return;
+ }
+
+ /* End sampling interval when a packet is lost, so we estimate the
+ * policer tokens were exhausted. Stopping the sampling before the
+ * tokens are exhausted under-estimates the policed rate.
+ */
+ if (!rs->losses)
+ return;
+
+ /* Calculate packets lost and delivered in sampling interval. */
+ lost = tp->lost - bbr->lt_last_lost;
+ delivered = tp->delivered - bbr->lt_last_delivered;
+ /* Is loss rate (lost/delivered) >= lt_loss_thresh? If not, wait. */
+ if (!delivered || (lost << BBR_SCALE) < bbr_lt_loss_thresh * delivered)
+ return;
+
+ /* Find average delivery rate in this sampling interval. */
+ t = div_u64(tp->delivered_mstamp, USEC_PER_MSEC) - bbr->lt_last_stamp;
+ if ((s32)t < 1)
+ return; /* interval is less than one ms, so wait */
+ /* Check if can multiply without overflow */
+ if (t >= ~0U / USEC_PER_MSEC) {
+ bbr_reset_lt_bw_sampling(sk); /* interval too long; reset */
+ return;
+ }
+ t *= USEC_PER_MSEC;
+ bw = (u64)delivered * BW_UNIT;
+ do_div(bw, t);
+ bbr_lt_bw_interval_done(sk, bw);
+}
+
+/* Estimate the bandwidth based on how fast packets are delivered */
+static void bbr_update_bw(struct sock *sk, const struct rate_sample *rs)
+{
+ struct tcp_sock *tp = tcp_sk(sk);
+ struct bbr *bbr = inet_csk_ca(sk);
+ u64 bw;
+
+ bbr->round_start = 0;
+ if (rs->delivered < 0 || rs->interval_us <= 0)
+ return; /* Not a valid observation */
+
+ /* See if we've reached the next RTT */
+ if (!before(rs->prior_delivered, bbr->next_rtt_delivered)) {
+ bbr->next_rtt_delivered = tp->delivered;
+ bbr->rtt_cnt++;
+ bbr->round_start = 1;
+ bbr->packet_conservation = 0;
+ }
+
+ bbr_lt_bw_sampling(sk, rs);
+
+ /* Divide delivered by the interval to find a (lower bound) bottleneck
+ * bandwidth sample. Delivered is in packets and interval_us in uS and
+ * ratio will be <<1 for most connections. So delivered is first scaled.
+ */
+ bw = div64_long((u64)rs->delivered * BW_UNIT, rs->interval_us);
+
+ /* If this sample is application-limited, it is likely to have a very
+ * low delivered count that represents application behavior rather than
+ * the available network rate. Such a sample could drag down estimated
+ * bw, causing needless slow-down. Thus, to continue to send at the
+ * last measured network rate, we filter out app-limited samples unless
+ * they describe the path bw at least as well as our bw model.
+ *
+ * So the goal during app-limited phase is to proceed with the best
+ * network rate no matter how long. We automatically leave this
+ * phase when app writes faster than the network can deliver :)
+ */
+ if (!rs->is_app_limited || bw >= bbr_max_bw(sk)) {
+ /* Incorporate new sample into our max bw filter. */
+ minmax_running_max(&bbr->bw, bbr_bw_rtts, bbr->rtt_cnt, bw);
+ }
+}
+
+/* Estimates the windowed max degree of ack aggregation.
+ * This is used to provision extra in-flight data to keep sending during
+ * inter-ACK silences.
+ *
+ * Degree of ack aggregation is estimated as extra data acked beyond expected.
+ *
+ * max_extra_acked = "maximum recent excess data ACKed beyond max_bw * interval"
+ * cwnd += max_extra_acked
+ *
+ * Max extra_acked is clamped by cwnd and bw * bbr_extra_acked_max_us (100 ms).
+ * Max filter is an approximate sliding window of 5-10 (packet timed) round
+ * trips.
+ */
+static void bbr_update_ack_aggregation(struct sock *sk,
+ const struct rate_sample *rs)
+{
+ u32 epoch_us, expected_acked, extra_acked;
+ struct bbr *bbr = inet_csk_ca(sk);
+ struct tcp_sock *tp = tcp_sk(sk);
+
+ if (!bbr_extra_acked_gain || rs->acked_sacked <= 0 ||
+ rs->delivered < 0 || rs->interval_us <= 0)
+ return;
+
+ if (bbr->round_start) {
+ bbr->extra_acked_win_rtts = min(0x1F,
+ bbr->extra_acked_win_rtts + 1);
+ if (bbr->extra_acked_win_rtts >= bbr_extra_acked_win_rtts) {
+ bbr->extra_acked_win_rtts = 0;
+ bbr->extra_acked_win_idx = bbr->extra_acked_win_idx ?
+ 0 : 1;
+ bbr->extra_acked[bbr->extra_acked_win_idx] = 0;
+ }
+ }
+
+ /* Compute how many packets we expected to be delivered over epoch. */
+ epoch_us = tcp_stamp_us_delta(tp->delivered_mstamp,
+ bbr->ack_epoch_mstamp);
+ expected_acked = ((u64)bbr_bw(sk) * epoch_us) / BW_UNIT;
+
+ /* Reset the aggregation epoch if ACK rate is below expected rate or
+ * significantly large no. of ack received since epoch (potentially
+ * quite old epoch).
+ */
+ if (bbr->ack_epoch_acked <= expected_acked ||
+ (bbr->ack_epoch_acked + rs->acked_sacked >=
+ bbr_ack_epoch_acked_reset_thresh)) {
+ bbr->ack_epoch_acked = 0;
+ bbr->ack_epoch_mstamp = tp->delivered_mstamp;
+ expected_acked = 0;
+ }
+
+ /* Compute excess data delivered, beyond what was expected. */
+ bbr->ack_epoch_acked = min_t(u32, 0xFFFFF,
+ bbr->ack_epoch_acked + rs->acked_sacked);
+ extra_acked = bbr->ack_epoch_acked - expected_acked;
+ extra_acked = min(extra_acked, tcp_snd_cwnd(tp));
+ if (extra_acked > bbr->extra_acked[bbr->extra_acked_win_idx])
+ bbr->extra_acked[bbr->extra_acked_win_idx] = extra_acked;
+}
+
+/* Estimate when the pipe is full, using the change in delivery rate: BBR
+ * estimates that STARTUP filled the pipe if the estimated bw hasn't changed by
+ * at least bbr_full_bw_thresh (25%) after bbr_full_bw_cnt (3) non-app-limited
+ * rounds. Why 3 rounds: 1: rwin autotuning grows the rwin, 2: we fill the
+ * higher rwin, 3: we get higher delivery rate samples. Or transient
+ * cross-traffic or radio noise can go away. CUBIC Hystart shares a similar
+ * design goal, but uses delay and inter-ACK spacing instead of bandwidth.
+ */
+static void bbr_check_full_bw_reached(struct sock *sk,
+ const struct rate_sample *rs)
+{
+ struct bbr *bbr = inet_csk_ca(sk);
+ u32 bw_thresh;
+
+ if (bbr_full_bw_reached(sk) || !bbr->round_start || rs->is_app_limited)
+ return;
+
+ bw_thresh = (u64)bbr->full_bw * bbr_full_bw_thresh >> BBR_SCALE;
+ if (bbr_max_bw(sk) >= bw_thresh) {
+ bbr->full_bw = bbr_max_bw(sk);
+ bbr->full_bw_cnt = 0;
+ return;
+ }
+ ++bbr->full_bw_cnt;
+ bbr->full_bw_reached = bbr->full_bw_cnt >= bbr_full_bw_cnt;
+}
+
+/* If pipe is probably full, drain the queue and then enter steady-state. */
+static void bbr_check_drain(struct sock *sk, const struct rate_sample *rs)
+{
+ struct bbr *bbr = inet_csk_ca(sk);
+
+ if (bbr->mode == BBR_STARTUP && bbr_full_bw_reached(sk)) {
+ bbr->mode = BBR_DRAIN; /* drain queue we created */
+ tcp_sk(sk)->snd_ssthresh =
+ bbr_inflight(sk, bbr_max_bw(sk), BBR_UNIT);
+ } /* fall through to check if in-flight is already small: */
+ if (bbr->mode == BBR_DRAIN &&
+ bbr_packets_in_net_at_edt(sk, tcp_packets_in_flight(tcp_sk(sk))) <=
+ bbr_inflight(sk, bbr_max_bw(sk), BBR_UNIT))
+ bbr_reset_probe_bw_mode(sk); /* we estimate queue is drained */
+}
+
+static void bbr_check_probe_rtt_done(struct sock *sk)
+{
+ struct tcp_sock *tp = tcp_sk(sk);
+ struct bbr *bbr = inet_csk_ca(sk);
+
+ if (!(bbr->probe_rtt_done_stamp &&
+ after(tcp_jiffies32, bbr->probe_rtt_done_stamp)))
+ return;
+
+ bbr->min_rtt_stamp = tcp_jiffies32; /* wait a while until PROBE_RTT */
+ tcp_snd_cwnd_set(tp, max(tcp_snd_cwnd(tp), bbr->prior_cwnd));
+ bbr_reset_mode(sk);
+}
+
+/* The goal of PROBE_RTT mode is to have BBR flows cooperatively and
+ * periodically drain the bottleneck queue, to converge to measure the true
+ * min_rtt (unloaded propagation delay). This allows the flows to keep queues
+ * small (reducing queuing delay and packet loss) and achieve fairness among
+ * BBR flows.
+ *
+ * The min_rtt filter window is 10 seconds. When the min_rtt estimate expires,
+ * we enter PROBE_RTT mode and cap the cwnd at bbr_cwnd_min_target=4 packets.
+ * After at least bbr_probe_rtt_mode_ms=200ms and at least one packet-timed
+ * round trip elapsed with that flight size <= 4, we leave PROBE_RTT mode and
+ * re-enter the previous mode. BBR uses 200ms to approximately bound the
+ * performance penalty of PROBE_RTT's cwnd capping to roughly 2% (200ms/10s).
+ *
+ * Note that flows need only pay 2% if they are busy sending over the last 10
+ * seconds. Interactive applications (e.g., Web, RPCs, video chunks) often have
+ * natural silences or low-rate periods within 10 seconds where the rate is low
+ * enough for long enough to drain its queue in the bottleneck. We pick up
+ * these min RTT measurements opportunistically with our min_rtt filter. :-)
+ */
+static void bbr_update_min_rtt(struct sock *sk, const struct rate_sample *rs)
+{
+ struct tcp_sock *tp = tcp_sk(sk);
+ struct bbr *bbr = inet_csk_ca(sk);
+ bool filter_expired;
+
+ /* Track min RTT seen in the min_rtt_win_sec filter window: */
+ filter_expired = after(tcp_jiffies32,
+ bbr->min_rtt_stamp + bbr_min_rtt_win_sec * HZ);
+ if (rs->rtt_us >= 0 &&
+ (rs->rtt_us < bbr->min_rtt_us ||
+ (filter_expired && !rs->is_ack_delayed))) {
+ bbr->min_rtt_us = rs->rtt_us;
+ bbr->min_rtt_stamp = tcp_jiffies32;
+ }
+
+ if (bbr_probe_rtt_mode_ms > 0 && filter_expired &&
+ !bbr->idle_restart && bbr->mode != BBR_PROBE_RTT) {
+ bbr->mode = BBR_PROBE_RTT; /* dip, drain queue */
+ bbr_save_cwnd(sk); /* note cwnd so we can restore it */
+ bbr->probe_rtt_done_stamp = 0;
+ }
+
+ if (bbr->mode == BBR_PROBE_RTT) {
+ /* Ignore low rate samples during this mode. */
+ tp->app_limited =
+ (tp->delivered + tcp_packets_in_flight(tp)) ? : 1;
+ /* Maintain min packets in flight for max(200 ms, 1 round). */
+ if (!bbr->probe_rtt_done_stamp &&
+ tcp_packets_in_flight(tp) <= bbr_cwnd_min_target) {
+ bbr->probe_rtt_done_stamp = tcp_jiffies32 +
+ msecs_to_jiffies(bbr_probe_rtt_mode_ms);
+ bbr->probe_rtt_round_done = 0;
+ bbr->next_rtt_delivered = tp->delivered;
+ } else if (bbr->probe_rtt_done_stamp) {
+ if (bbr->round_start)
+ bbr->probe_rtt_round_done = 1;
+ if (bbr->probe_rtt_round_done)
+ bbr_check_probe_rtt_done(sk);
+ }
+ }
+ /* Restart after idle ends only once we process a new S/ACK for data */
+ if (rs->delivered > 0)
+ bbr->idle_restart = 0;
+}
+
+static void bbr_update_gains(struct sock *sk)
+{
+ struct bbr *bbr = inet_csk_ca(sk);
+
+ switch (bbr->mode) {
+ case BBR_STARTUP:
+ bbr->pacing_gain = bbr_high_gain;
+ bbr->cwnd_gain = bbr_high_gain;
+ break;
+ case BBR_DRAIN:
+ bbr->pacing_gain = bbr_drain_gain; /* slow, to drain */
+ bbr->cwnd_gain = bbr_high_gain; /* keep cwnd */
+ break;
+ case BBR_PROBE_BW:
+ bbr->pacing_gain = (bbr->lt_use_bw ?
+ BBR_UNIT :
+ bbr_pacing_gain[bbr->cycle_idx]);
+ bbr->cwnd_gain = bbr_cwnd_gain;
+ break;
+ case BBR_PROBE_RTT:
+ bbr->pacing_gain = BBR_UNIT;
+ bbr->cwnd_gain = BBR_UNIT;
+ break;
+ default:
+ WARN_ONCE(1, "BBR bad mode: %u\n", bbr->mode);
+ break;
+ }
+}
+
+static void bbr_update_model(struct sock *sk, const struct rate_sample *rs)
+{
+ bbr_update_bw(sk, rs);
+ bbr_update_ack_aggregation(sk, rs);
+ bbr_update_cycle_phase(sk, rs);
+ bbr_check_full_bw_reached(sk, rs);
+ bbr_check_drain(sk, rs);
+ bbr_update_min_rtt(sk, rs);
+ bbr_update_gains(sk);
+}
+
+static void bbr_main(struct sock *sk, const struct rate_sample *rs)
+{
+ struct bbr *bbr = inet_csk_ca(sk);
+ u32 bw;
+
+ bbr_update_model(sk, rs);
+
+ bw = bbr_bw(sk);
+ bbr_set_pacing_rate(sk, bw, bbr->pacing_gain);
+ bbr_set_cwnd(sk, rs, rs->acked_sacked, bw, bbr->cwnd_gain);
+}
+
+static void bbr_init(struct sock *sk)
+{
+ struct tcp_sock *tp = tcp_sk(sk);
+ struct bbr *bbr = inet_csk_ca(sk);
+
+ bbr->prior_cwnd = 0;
+ tp->snd_ssthresh = TCP_INFINITE_SSTHRESH;
+ bbr->rtt_cnt = 0;
+ bbr->next_rtt_delivered = tp->delivered;
+ bbr->prev_ca_state = TCP_CA_Open;
+ bbr->packet_conservation = 0;
+
+ bbr->probe_rtt_done_stamp = 0;
+ bbr->probe_rtt_round_done = 0;
+ bbr->min_rtt_us = tcp_min_rtt(tp);
+ bbr->min_rtt_stamp = tcp_jiffies32;
+
+ minmax_reset(&bbr->bw, bbr->rtt_cnt, 0); /* init max bw to 0 */
+
+ bbr->has_seen_rtt = 0;
+ bbr_init_pacing_rate_from_rtt(sk);
+
+ bbr->round_start = 0;
+ bbr->idle_restart = 0;
+ bbr->full_bw_reached = 0;
+ bbr->full_bw = 0;
+ bbr->full_bw_cnt = 0;
+ bbr->cycle_mstamp = 0;
+ bbr->cycle_idx = 0;
+ bbr_reset_lt_bw_sampling(sk);
+ bbr_reset_startup_mode(sk);
+
+ bbr->ack_epoch_mstamp = tp->tcp_mstamp;
+ bbr->ack_epoch_acked = 0;
+ bbr->extra_acked_win_rtts = 0;
+ bbr->extra_acked_win_idx = 0;
+ bbr->extra_acked[0] = 0;
+ bbr->extra_acked[1] = 0;
+
+ cmpxchg(&sk->sk_pacing_status, SK_PACING_NONE, SK_PACING_NEEDED);
+}
+
+static u32 bbr_sndbuf_expand(struct sock *sk)
+{
+ /* Provision 3 * cwnd since BBR may slow-start even during recovery. */
+ return 3;
+}
+
+/* In theory BBR does not need to undo the cwnd since it does not
+ * always reduce cwnd on losses (see bbr_main()). Keep it for now.
+ */
+static u32 bbr_undo_cwnd(struct sock *sk)
+{
+ struct bbr *bbr = inet_csk_ca(sk);
+
+ bbr->full_bw = 0; /* spurious slow-down; reset full pipe detection */
+ bbr->full_bw_cnt = 0;
+ bbr_reset_lt_bw_sampling(sk);
+ return tcp_snd_cwnd(tcp_sk(sk));
+}
+
+/* Entering loss recovery, so save cwnd for when we exit or undo recovery. */
+static u32 bbr_ssthresh(struct sock *sk)
+{
+ bbr_save_cwnd(sk);
+ return tcp_sk(sk)->snd_ssthresh;
+}
+
+static size_t bbr_get_info(struct sock *sk, u32 ext, int *attr,
+ union tcp_cc_info *info)
+{
+ if (ext & (1 << (INET_DIAG_BBRINFO - 1)) ||
+ ext & (1 << (INET_DIAG_VEGASINFO - 1))) {
+ struct tcp_sock *tp = tcp_sk(sk);
+ struct bbr *bbr = inet_csk_ca(sk);
+ u64 bw = bbr_bw(sk);
+
+ bw = bw * tp->mss_cache * USEC_PER_SEC >> BW_SCALE;
+ memset(&info->bbr, 0, sizeof(info->bbr));
+ info->bbr.bbr_bw_lo = (u32)bw;
+ info->bbr.bbr_bw_hi = (u32)(bw >> 32);
+ info->bbr.bbr_min_rtt = bbr->min_rtt_us;
+ info->bbr.bbr_pacing_gain = bbr->pacing_gain;
+ info->bbr.bbr_cwnd_gain = bbr->cwnd_gain;
+ *attr = INET_DIAG_BBRINFO;
+ return sizeof(info->bbr);
+ }
+ return 0;
+}
+
+static void bbr_set_state(struct sock *sk, u8 new_state)
+{
+ struct bbr *bbr = inet_csk_ca(sk);
+
+ if (new_state == TCP_CA_Loss) {
+ struct rate_sample rs = { .losses = 1 };
+
+ bbr->prev_ca_state = TCP_CA_Loss;
+ bbr->full_bw = 0;
+ bbr->round_start = 1; /* treat RTO like end of a round */
+ bbr_lt_bw_sampling(sk, &rs);
+ }
+}
+
+static struct tcp_congestion_ops tcp_bbr_cong_ops __read_mostly = {
+ .flags = TCP_CONG_NON_RESTRICTED,
+ .name = "bbr",
+ .owner = THIS_MODULE,
+ .init = bbr_init,
+ .cong_control = bbr_main,
+ .sndbuf_expand = bbr_sndbuf_expand,
+ .undo_cwnd = bbr_undo_cwnd,
+ .cwnd_event = bbr_cwnd_event,
+ .ssthresh = bbr_ssthresh,
+ .min_tso_segs = bbr_min_tso_segs,
+ .get_info = bbr_get_info,
+ .set_state = bbr_set_state,
+};
+
+BTF_SET8_START(tcp_bbr_check_kfunc_ids)
+#ifdef CONFIG_X86
+#ifdef CONFIG_DYNAMIC_FTRACE
+BTF_ID_FLAGS(func, bbr_init)
+BTF_ID_FLAGS(func, bbr_main)
+BTF_ID_FLAGS(func, bbr_sndbuf_expand)
+BTF_ID_FLAGS(func, bbr_undo_cwnd)
+BTF_ID_FLAGS(func, bbr_cwnd_event)
+BTF_ID_FLAGS(func, bbr_ssthresh)
+BTF_ID_FLAGS(func, bbr_min_tso_segs)
+BTF_ID_FLAGS(func, bbr_set_state)
+#endif
+#endif
+BTF_SET8_END(tcp_bbr_check_kfunc_ids)
+
+static const struct btf_kfunc_id_set tcp_bbr_kfunc_set = {
+ .owner = THIS_MODULE,
+ .set = &tcp_bbr_check_kfunc_ids,
+};
+
+static int __init bbr_register(void)
+{
+ int ret;
+
+ BUILD_BUG_ON(sizeof(struct bbr) > ICSK_CA_PRIV_SIZE);
+
+ ret = register_btf_kfunc_id_set(BPF_PROG_TYPE_STRUCT_OPS, &tcp_bbr_kfunc_set);
+ if (ret < 0)
+ return ret;
+ return tcp_register_congestion_control(&tcp_bbr_cong_ops);
+}
+
+static void __exit bbr_unregister(void)
+{
+ tcp_unregister_congestion_control(&tcp_bbr_cong_ops);
+}
+
+module_init(bbr_register);
+module_exit(bbr_unregister);
+
+MODULE_AUTHOR("Van Jacobson <vanj@google.com>");
+MODULE_AUTHOR("Neal Cardwell <ncardwell@google.com>");
+MODULE_AUTHOR("Yuchung Cheng <ycheng@google.com>");
+MODULE_AUTHOR("Soheil Hassas Yeganeh <soheil@google.com>");
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_DESCRIPTION("TCP BBR (Bottleneck Bandwidth and RTT)");