diff options
Diffstat (limited to 'tools/testing/ktest/ktest.pl')
-rwxr-xr-x | tools/testing/ktest/ktest.pl | 4555 |
1 files changed, 4555 insertions, 0 deletions
diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl new file mode 100755 index 000000000..e6c381498 --- /dev/null +++ b/tools/testing/ktest/ktest.pl @@ -0,0 +1,4555 @@ +#!/usr/bin/perl -w +# SPDX-License-Identifier: GPL-2.0-only +# +# Copyright 2010 - Steven Rostedt <srostedt@redhat.com>, Red Hat Inc. +# + +use strict; +use IPC::Open2; +use Fcntl qw(F_GETFL F_SETFL O_NONBLOCK); +use File::Path qw(mkpath); +use File::Copy qw(cp); +use FileHandle; +use FindBin; +use IO::Handle; + +my $VERSION = "0.2"; + +$| = 1; + +my %opt; +my %repeat_tests; +my %repeats; +my %evals; + +#default opts +my %default = ( + "MAILER" => "sendmail", # default mailer + "EMAIL_ON_ERROR" => 1, + "EMAIL_WHEN_FINISHED" => 1, + "EMAIL_WHEN_CANCELED" => 0, + "EMAIL_WHEN_STARTED" => 0, + "NUM_TESTS" => 1, + "TEST_TYPE" => "build", + "BUILD_TYPE" => "oldconfig", + "MAKE_CMD" => "make", + "CLOSE_CONSOLE_SIGNAL" => "INT", + "TIMEOUT" => 120, + "TMP_DIR" => "/tmp/ktest/\${MACHINE}", + "SLEEP_TIME" => 60, # sleep time between tests + "BUILD_NOCLEAN" => 0, + "REBOOT_ON_ERROR" => 0, + "POWEROFF_ON_ERROR" => 0, + "REBOOT_ON_SUCCESS" => 1, + "POWEROFF_ON_SUCCESS" => 0, + "BUILD_OPTIONS" => "", + "BISECT_SLEEP_TIME" => 60, # sleep time between bisects + "PATCHCHECK_SLEEP_TIME" => 60, # sleep time between patch checks + "CLEAR_LOG" => 0, + "BISECT_MANUAL" => 0, + "BISECT_SKIP" => 1, + "BISECT_TRIES" => 1, + "MIN_CONFIG_TYPE" => "boot", + "SUCCESS_LINE" => "login:", + "DETECT_TRIPLE_FAULT" => 1, + "NO_INSTALL" => 0, + "BOOTED_TIMEOUT" => 1, + "DIE_ON_FAILURE" => 1, + "SSH_EXEC" => "ssh \$SSH_USER\@\$MACHINE \$SSH_COMMAND", + "SCP_TO_TARGET" => "scp \$SRC_FILE \$SSH_USER\@\$MACHINE:\$DST_FILE", + "SCP_TO_TARGET_INSTALL" => "\${SCP_TO_TARGET}", + "REBOOT" => "ssh \$SSH_USER\@\$MACHINE reboot", + "REBOOT_RETURN_CODE" => 255, + "STOP_AFTER_SUCCESS" => 10, + "STOP_AFTER_FAILURE" => 60, + "STOP_TEST_AFTER" => 600, + "MAX_MONITOR_WAIT" => 1800, + "GRUB_REBOOT" => "grub2-reboot", + "GRUB_BLS_GET" => "grubby --info=ALL", + "SYSLINUX" => "extlinux", + "SYSLINUX_PATH" => "/boot/extlinux", + "CONNECT_TIMEOUT" => 25, + +# required, and we will ask users if they don't have them but we keep the default +# value something that is common. + "REBOOT_TYPE" => "grub", + "LOCALVERSION" => "-test", + "SSH_USER" => "root", + "BUILD_TARGET" => "arch/x86/boot/bzImage", + "TARGET_IMAGE" => "/boot/vmlinuz-test", + + "LOG_FILE" => undef, + "IGNORE_UNUSED" => 0, +); + +my $test_log_start = 0; + +my $ktest_config = "ktest.conf"; +my $version; +my $have_version = 0; +my $machine; +my $last_machine; +my $ssh_user; +my $tmpdir; +my $builddir; +my $outputdir; +my $output_config; +my $test_type; +my $build_type; +my $build_options; +my $final_post_ktest; +my $pre_ktest; +my $post_ktest; +my $pre_test; +my $pre_test_die; +my $post_test; +my $pre_build; +my $post_build; +my $pre_build_die; +my $post_build_die; +my $reboot_type; +my $reboot_script; +my $power_cycle; +my $reboot; +my $reboot_return_code; +my $reboot_on_error; +my $switch_to_good; +my $switch_to_test; +my $poweroff_on_error; +my $reboot_on_success; +my $die_on_failure; +my $powercycle_after_reboot; +my $poweroff_after_halt; +my $max_monitor_wait; +my $ssh_exec; +my $scp_to_target; +my $scp_to_target_install; +my $power_off; +my $grub_menu; +my $last_grub_menu; +my $grub_file; +my $grub_number; +my $grub_reboot; +my $grub_bls_get; +my $syslinux; +my $syslinux_path; +my $syslinux_label; +my $target; +my $make; +my $pre_install; +my $post_install; +my $no_install; +my $noclean; +my $minconfig; +my $start_minconfig; +my $start_minconfig_defined; +my $output_minconfig; +my $minconfig_type; +my $use_output_minconfig; +my $warnings_file; +my $ignore_config; +my $ignore_errors; +my $addconfig; +my $in_bisect = 0; +my $bisect_bad_commit = ""; +my $reverse_bisect; +my $bisect_manual; +my $bisect_skip; +my $bisect_tries; +my $config_bisect_good; +my $bisect_ret_good; +my $bisect_ret_bad; +my $bisect_ret_skip; +my $bisect_ret_abort; +my $bisect_ret_default; +my $in_patchcheck = 0; +my $run_test; +my $buildlog; +my $testlog; +my $dmesg; +my $monitor_fp; +my $monitor_pid; +my $monitor_cnt = 0; +my $sleep_time; +my $bisect_sleep_time; +my $patchcheck_sleep_time; +my $ignore_warnings; +my $store_failures; +my $store_successes; +my $test_name; +my $timeout; +my $run_timeout; +my $connect_timeout; +my $config_bisect_exec; +my $booted_timeout; +my $detect_triplefault; +my $console; +my $close_console_signal; +my $reboot_success_line; +my $success_line; +my $stop_after_success; +my $stop_after_failure; +my $stop_test_after; +my $build_target; +my $target_image; +my $checkout; +my $localversion; +my $iteration = 0; +my $successes = 0; +my $stty_orig; +my $run_command_status = 0; + +my $bisect_good; +my $bisect_bad; +my $bisect_type; +my $bisect_start; +my $bisect_replay; +my $bisect_files; +my $bisect_reverse; +my $bisect_check; + +my $config_bisect; +my $config_bisect_type; +my $config_bisect_check; + +my $patchcheck_type; +my $patchcheck_start; +my $patchcheck_cherry; +my $patchcheck_end; + +my $build_time; +my $install_time; +my $reboot_time; +my $test_time; + +my $pwd; +my $dirname = $FindBin::Bin; + +my $mailto; +my $mailer; +my $mail_path; +my $mail_max_size; +my $mail_command; +my $email_on_error; +my $email_when_finished; +my $email_when_started; +my $email_when_canceled; + +my $script_start_time = localtime(); + +# set when a test is something other that just building or install +# which would require more options. +my $buildonly = 1; + +# tell build not to worry about warnings, even when WARNINGS_FILE is set +my $warnings_ok = 0; + +# set when creating a new config +my $newconfig = 0; + +my %entered_configs; +my %config_help; +my %variable; + +# force_config is the list of configs that we force enabled (or disabled) +# in a .config file. The MIN_CONFIG and ADD_CONFIG configs. +my %force_config; + +# do not force reboots on config problems +my $no_reboot = 1; + +# reboot on success +my $reboot_success = 0; + +my %option_map = ( + "MAILTO" => \$mailto, + "MAILER" => \$mailer, + "MAIL_PATH" => \$mail_path, + "MAIL_MAX_SIZE" => \$mail_max_size, + "MAIL_COMMAND" => \$mail_command, + "EMAIL_ON_ERROR" => \$email_on_error, + "EMAIL_WHEN_FINISHED" => \$email_when_finished, + "EMAIL_WHEN_STARTED" => \$email_when_started, + "EMAIL_WHEN_CANCELED" => \$email_when_canceled, + "MACHINE" => \$machine, + "SSH_USER" => \$ssh_user, + "TMP_DIR" => \$tmpdir, + "OUTPUT_DIR" => \$outputdir, + "BUILD_DIR" => \$builddir, + "TEST_TYPE" => \$test_type, + "PRE_KTEST" => \$pre_ktest, + "POST_KTEST" => \$post_ktest, + "PRE_TEST" => \$pre_test, + "PRE_TEST_DIE" => \$pre_test_die, + "POST_TEST" => \$post_test, + "BUILD_TYPE" => \$build_type, + "BUILD_OPTIONS" => \$build_options, + "PRE_BUILD" => \$pre_build, + "POST_BUILD" => \$post_build, + "PRE_BUILD_DIE" => \$pre_build_die, + "POST_BUILD_DIE" => \$post_build_die, + "POWER_CYCLE" => \$power_cycle, + "REBOOT" => \$reboot, + "REBOOT_RETURN_CODE" => \$reboot_return_code, + "BUILD_NOCLEAN" => \$noclean, + "MIN_CONFIG" => \$minconfig, + "OUTPUT_MIN_CONFIG" => \$output_minconfig, + "START_MIN_CONFIG" => \$start_minconfig, + "MIN_CONFIG_TYPE" => \$minconfig_type, + "USE_OUTPUT_MIN_CONFIG" => \$use_output_minconfig, + "WARNINGS_FILE" => \$warnings_file, + "IGNORE_CONFIG" => \$ignore_config, + "TEST" => \$run_test, + "ADD_CONFIG" => \$addconfig, + "REBOOT_TYPE" => \$reboot_type, + "GRUB_MENU" => \$grub_menu, + "GRUB_FILE" => \$grub_file, + "GRUB_REBOOT" => \$grub_reboot, + "GRUB_BLS_GET" => \$grub_bls_get, + "SYSLINUX" => \$syslinux, + "SYSLINUX_PATH" => \$syslinux_path, + "SYSLINUX_LABEL" => \$syslinux_label, + "PRE_INSTALL" => \$pre_install, + "POST_INSTALL" => \$post_install, + "NO_INSTALL" => \$no_install, + "REBOOT_SCRIPT" => \$reboot_script, + "REBOOT_ON_ERROR" => \$reboot_on_error, + "SWITCH_TO_GOOD" => \$switch_to_good, + "SWITCH_TO_TEST" => \$switch_to_test, + "POWEROFF_ON_ERROR" => \$poweroff_on_error, + "REBOOT_ON_SUCCESS" => \$reboot_on_success, + "DIE_ON_FAILURE" => \$die_on_failure, + "POWER_OFF" => \$power_off, + "POWERCYCLE_AFTER_REBOOT" => \$powercycle_after_reboot, + "POWEROFF_AFTER_HALT" => \$poweroff_after_halt, + "MAX_MONITOR_WAIT" => \$max_monitor_wait, + "SLEEP_TIME" => \$sleep_time, + "BISECT_SLEEP_TIME" => \$bisect_sleep_time, + "PATCHCHECK_SLEEP_TIME" => \$patchcheck_sleep_time, + "IGNORE_WARNINGS" => \$ignore_warnings, + "IGNORE_ERRORS" => \$ignore_errors, + "BISECT_MANUAL" => \$bisect_manual, + "BISECT_SKIP" => \$bisect_skip, + "BISECT_TRIES" => \$bisect_tries, + "CONFIG_BISECT_GOOD" => \$config_bisect_good, + "BISECT_RET_GOOD" => \$bisect_ret_good, + "BISECT_RET_BAD" => \$bisect_ret_bad, + "BISECT_RET_SKIP" => \$bisect_ret_skip, + "BISECT_RET_ABORT" => \$bisect_ret_abort, + "BISECT_RET_DEFAULT" => \$bisect_ret_default, + "STORE_FAILURES" => \$store_failures, + "STORE_SUCCESSES" => \$store_successes, + "TEST_NAME" => \$test_name, + "TIMEOUT" => \$timeout, + "RUN_TIMEOUT" => \$run_timeout, + "CONNECT_TIMEOUT" => \$connect_timeout, + "CONFIG_BISECT_EXEC" => \$config_bisect_exec, + "BOOTED_TIMEOUT" => \$booted_timeout, + "CONSOLE" => \$console, + "CLOSE_CONSOLE_SIGNAL" => \$close_console_signal, + "DETECT_TRIPLE_FAULT" => \$detect_triplefault, + "SUCCESS_LINE" => \$success_line, + "REBOOT_SUCCESS_LINE" => \$reboot_success_line, + "STOP_AFTER_SUCCESS" => \$stop_after_success, + "STOP_AFTER_FAILURE" => \$stop_after_failure, + "STOP_TEST_AFTER" => \$stop_test_after, + "BUILD_TARGET" => \$build_target, + "SSH_EXEC" => \$ssh_exec, + "SCP_TO_TARGET" => \$scp_to_target, + "SCP_TO_TARGET_INSTALL" => \$scp_to_target_install, + "CHECKOUT" => \$checkout, + "TARGET_IMAGE" => \$target_image, + "LOCALVERSION" => \$localversion, + + "BISECT_GOOD" => \$bisect_good, + "BISECT_BAD" => \$bisect_bad, + "BISECT_TYPE" => \$bisect_type, + "BISECT_START" => \$bisect_start, + "BISECT_REPLAY" => \$bisect_replay, + "BISECT_FILES" => \$bisect_files, + "BISECT_REVERSE" => \$bisect_reverse, + "BISECT_CHECK" => \$bisect_check, + + "CONFIG_BISECT" => \$config_bisect, + "CONFIG_BISECT_TYPE" => \$config_bisect_type, + "CONFIG_BISECT_CHECK" => \$config_bisect_check, + + "PATCHCHECK_TYPE" => \$patchcheck_type, + "PATCHCHECK_START" => \$patchcheck_start, + "PATCHCHECK_CHERRY" => \$patchcheck_cherry, + "PATCHCHECK_END" => \$patchcheck_end, +); + +# Options may be used by other options, record them. +my %used_options; + +# default variables that can be used +chomp ($variable{"PWD"} = `pwd`); +$pwd = $variable{"PWD"}; + +$config_help{"MACHINE"} = << "EOF" + The machine hostname that you will test. + For build only tests, it is still needed to differentiate log files. +EOF + ; +$config_help{"SSH_USER"} = << "EOF" + The box is expected to have ssh on normal bootup, provide the user + (most likely root, since you need privileged operations) +EOF + ; +$config_help{"BUILD_DIR"} = << "EOF" + The directory that contains the Linux source code (full path). + You can use \${PWD} that will be the path where ktest.pl is run, or use + \${THIS_DIR} which is assigned \${PWD} but may be changed later. +EOF + ; +$config_help{"OUTPUT_DIR"} = << "EOF" + The directory that the objects will be built (full path). + (can not be same as BUILD_DIR) + You can use \${PWD} that will be the path where ktest.pl is run, or use + \${THIS_DIR} which is assigned \${PWD} but may be changed later. +EOF + ; +$config_help{"BUILD_TARGET"} = << "EOF" + The location of the compiled file to copy to the target. + (relative to OUTPUT_DIR) +EOF + ; +$config_help{"BUILD_OPTIONS"} = << "EOF" + Options to add to \"make\" when building. + i.e. -j20 +EOF + ; +$config_help{"TARGET_IMAGE"} = << "EOF" + The place to put your image on the test machine. +EOF + ; +$config_help{"POWER_CYCLE"} = << "EOF" + A script or command to reboot the box. + + Here is a digital loggers power switch example + POWER_CYCLE = wget --no-proxy -O /dev/null -q --auth-no-challenge 'http://admin:admin\@power/outlet?5=CCL' + + Here is an example to reboot a virtual box on the current host + with the name "Guest". + POWER_CYCLE = virsh destroy Guest; sleep 5; virsh start Guest +EOF + ; +$config_help{"CONSOLE"} = << "EOF" + The script or command that reads the console + + If you use ttywatch server, something like the following would work. +CONSOLE = nc -d localhost 3001 + + For a virtual machine with guest name "Guest". +CONSOLE = virsh console Guest +EOF + ; +$config_help{"LOCALVERSION"} = << "EOF" + Required version ending to differentiate the test + from other linux builds on the system. +EOF + ; +$config_help{"REBOOT_TYPE"} = << "EOF" + Way to reboot the box to the test kernel. + Only valid options so far are "grub", "grub2", "grub2bls", "syslinux", and "script". + + If you specify grub, it will assume grub version 1 + and will search in /boot/grub/menu.lst for the title \$GRUB_MENU + and select that target to reboot to the kernel. If this is not + your setup, then specify "script" and have a command or script + specified in REBOOT_SCRIPT to boot to the target. + + The entry in /boot/grub/menu.lst must be entered in manually. + The test will not modify that file. + + If you specify grub2, then you also need to specify both \$GRUB_MENU + and \$GRUB_FILE. + + If you specify grub2bls, then you also need to specify \$GRUB_MENU. + + If you specify syslinux, then you may use SYSLINUX to define the syslinux + command (defaults to extlinux), and SYSLINUX_PATH to specify the path to + the syslinux install (defaults to /boot/extlinux). But you have to specify + SYSLINUX_LABEL to define the label to boot to for the test kernel. +EOF + ; +$config_help{"GRUB_MENU"} = << "EOF" + The grub title name for the test kernel to boot + (Only mandatory if REBOOT_TYPE = grub or grub2) + + Note, ktest.pl will not update the grub menu.lst, you need to + manually add an option for the test. ktest.pl will search + the grub menu.lst for this option to find what kernel to + reboot into. + + For example, if in the /boot/grub/menu.lst the test kernel title has: + title Test Kernel + kernel vmlinuz-test + GRUB_MENU = Test Kernel + + For grub2, a search of \$GRUB_FILE is performed for the lines + that begin with "menuentry". It will not detect submenus. The + menu must be a non-nested menu. Add the quotes used in the menu + to guarantee your selection, as the first menuentry with the content + of \$GRUB_MENU that is found will be used. + + For grub2bls, \$GRUB_MENU is searched on the result of \$GRUB_BLS_GET + command for the lines that begin with "title". +EOF + ; +$config_help{"GRUB_FILE"} = << "EOF" + If grub2 is used, the full path for the grub.cfg file is placed + here. Use something like /boot/grub2/grub.cfg to search. +EOF + ; +$config_help{"SYSLINUX_LABEL"} = << "EOF" + If syslinux is used, the label that boots the target kernel must + be specified with SYSLINUX_LABEL. +EOF + ; +$config_help{"REBOOT_SCRIPT"} = << "EOF" + A script to reboot the target into the test kernel + (Only mandatory if REBOOT_TYPE = script) +EOF + ; + +# used with process_expression() +my $d = 0; + +# defined before get_test_name() +my $in_die = 0; + +# defined before process_warning_line() +my $check_build_re = ".*:.*(warning|error|Error):.*"; +my $utf8_quote = "\\x{e2}\\x{80}(\\x{98}|\\x{99})"; + +# defined before child_finished() +my $child_done; + +# config_ignore holds the configs that were set (or unset) for +# a good config and we will ignore these configs for the rest +# of a config bisect. These configs stay as they were. +my %config_ignore; + +# config_set holds what all configs were set as. +my %config_set; + +# config_off holds the set of configs that the bad config had disabled. +# We need to record them and set them in the .config when running +# olddefconfig, because olddefconfig keeps the defaults. +my %config_off; + +# config_off_tmp holds a set of configs to turn off for now +my @config_off_tmp; + +# config_list is the set of configs that are being tested +my %config_list; +my %null_config; + +my %dependency; + +# found above run_config_bisect() +my $pass = 1; + +# found above add_dep() + +my %depends; +my %depcount; +my $iflevel = 0; +my @ifdeps; + +# prevent recursion +my %read_kconfigs; + +# found above test_this_config() +my %min_configs; +my %keep_configs; +my %save_configs; +my %processed_configs; +my %nochange_config; + +# +# These are first defined here, main function later on +# +sub run_command; +sub start_monitor; +sub end_monitor; +sub wait_for_monitor; + +sub _logit { + if (defined($opt{"LOG_FILE"})) { + print LOG @_; + } +} + +sub logit { + if (defined($opt{"LOG_FILE"})) { + _logit @_; + } else { + print @_; + } +} + +sub doprint { + print @_; + _logit @_; +} + +sub read_prompt { + my ($cancel, $prompt) = @_; + + my $ans; + + for (;;) { + if ($cancel) { + print "$prompt [y/n/C] "; + } else { + print "$prompt [Y/n] "; + } + $ans = <STDIN>; + chomp $ans; + if ($ans =~ /^\s*$/) { + if ($cancel) { + $ans = "c"; + } else { + $ans = "y"; + } + } + last if ($ans =~ /^y$/i || $ans =~ /^n$/i); + if ($cancel) { + last if ($ans =~ /^c$/i); + print "Please answer either 'y', 'n' or 'c'.\n"; + } else { + print "Please answer either 'y' or 'n'.\n"; + } + } + if ($ans =~ /^c/i) { + exit; + } + if ($ans !~ /^y$/i) { + return 0; + } + return 1; +} + +sub read_yn { + my ($prompt) = @_; + + return read_prompt 0, $prompt; +} + +sub read_ync { + my ($prompt) = @_; + + return read_prompt 1, $prompt; +} + +sub get_mandatory_config { + my ($config) = @_; + my $ans; + + return if (defined($opt{$config})); + + if (defined($config_help{$config})) { + print "\n"; + print $config_help{$config}; + } + + for (;;) { + print "$config = "; + if (defined($default{$config}) && length($default{$config})) { + print "\[$default{$config}\] "; + } + $ans = <STDIN>; + $ans =~ s/^\s*(.*\S)\s*$/$1/; + if ($ans =~ /^\s*$/) { + if ($default{$config}) { + $ans = $default{$config}; + } else { + print "Your answer can not be blank\n"; + next; + } + } + $entered_configs{$config} = ${ans}; + last; + } +} + +sub show_time { + my ($time) = @_; + + my $hours = 0; + my $minutes = 0; + + if ($time > 3600) { + $hours = int($time / 3600); + $time -= $hours * 3600; + } + if ($time > 60) { + $minutes = int($time / 60); + $time -= $minutes * 60; + } + + if ($hours > 0) { + doprint "$hours hour"; + doprint "s" if ($hours > 1); + doprint " "; + } + + if ($minutes > 0) { + doprint "$minutes minute"; + doprint "s" if ($minutes > 1); + doprint " "; + } + + doprint "$time second"; + doprint "s" if ($time != 1); +} + +sub print_times { + doprint "\n"; + if ($build_time) { + doprint "Build time: "; + show_time($build_time); + doprint "\n"; + } + if ($install_time) { + doprint "Install time: "; + show_time($install_time); + doprint "\n"; + } + if ($reboot_time) { + doprint "Reboot time: "; + show_time($reboot_time); + doprint "\n"; + } + if ($test_time) { + doprint "Test time: "; + show_time($test_time); + doprint "\n"; + } + # reset for iterations like bisect + $build_time = 0; + $install_time = 0; + $reboot_time = 0; + $test_time = 0; +} + +sub get_mandatory_configs { + get_mandatory_config("MACHINE"); + get_mandatory_config("BUILD_DIR"); + get_mandatory_config("OUTPUT_DIR"); + + if ($newconfig) { + get_mandatory_config("BUILD_OPTIONS"); + } + + # options required for other than just building a kernel + if (!$buildonly) { + get_mandatory_config("POWER_CYCLE"); + get_mandatory_config("CONSOLE"); + } + + # options required for install and more + if ($buildonly != 1) { + get_mandatory_config("SSH_USER"); + get_mandatory_config("BUILD_TARGET"); + get_mandatory_config("TARGET_IMAGE"); + } + + get_mandatory_config("LOCALVERSION"); + + return if ($buildonly); + + my $rtype = $opt{"REBOOT_TYPE"}; + + if (!defined($rtype)) { + if (!defined($opt{"GRUB_MENU"})) { + get_mandatory_config("REBOOT_TYPE"); + $rtype = $entered_configs{"REBOOT_TYPE"}; + } else { + $rtype = "grub"; + } + } + + if (($rtype eq "grub") or ($rtype eq "grub2bls")) { + get_mandatory_config("GRUB_MENU"); + } + + if ($rtype eq "grub2") { + get_mandatory_config("GRUB_MENU"); + get_mandatory_config("GRUB_FILE"); + } + + if ($rtype eq "syslinux") { + get_mandatory_config("SYSLINUX_LABEL"); + } +} + +sub process_variables { + my ($value, $remove_undef) = @_; + my $retval = ""; + + # We want to check for '\', and it is just easier + # to check the previous characet of '$' and not need + # to worry if '$' is the first character. By adding + # a space to $value, we can just check [^\\]\$ and + # it will still work. + $value = " $value"; + + while ($value =~ /(.*?[^\\])\$\{(.*?)\}(.*)/) { + my $begin = $1; + my $var = $2; + my $end = $3; + # append beginning of value to retval + $retval = "$retval$begin"; + if (defined($variable{$var})) { + $retval = "$retval$variable{$var}"; + } elsif (defined($remove_undef) && $remove_undef) { + # for if statements, any variable that is not defined, + # we simple convert to 0 + $retval = "${retval}0"; + } else { + # put back the origin piece. + $retval = "$retval\$\{$var\}"; + # This could be an option that is used later, save + # it so we don't warn if this option is not one of + # ktests options. + $used_options{$var} = 1; + } + $value = $end; + } + $retval = "$retval$value"; + + # remove the space added in the beginning + $retval =~ s/ //; + + return "$retval"; +} + +sub set_value { + my ($lvalue, $rvalue, $override, $overrides, $name) = @_; + + my $prvalue = process_variables($rvalue); + + if ($lvalue =~ /^(TEST|BISECT|CONFIG_BISECT)_TYPE(\[.*\])?$/ && + $prvalue !~ /^(config_|)bisect$/ && + $prvalue !~ /^build$/ && + $buildonly) { + + # Note if a test is something other than build, then we + # will need other mandatory options. + if ($prvalue ne "install") { + $buildonly = 0; + } else { + # install still limits some mandatory options. + $buildonly = 2; + } + } + + if (defined($opt{$lvalue})) { + if (!$override || defined(${$overrides}{$lvalue})) { + my $extra = ""; + if ($override) { + $extra = "In the same override section!\n"; + } + die "$name: $.: Option $lvalue defined more than once!\n$extra"; + } + ${$overrides}{$lvalue} = $prvalue; + } + + $opt{$lvalue} = $prvalue; +} + +sub set_eval { + my ($lvalue, $rvalue, $name) = @_; + + my $prvalue = process_variables($rvalue); + my $arr; + + if (defined($evals{$lvalue})) { + $arr = $evals{$lvalue}; + } else { + $arr = []; + $evals{$lvalue} = $arr; + } + + push @{$arr}, $rvalue; +} + +sub set_variable { + my ($lvalue, $rvalue) = @_; + + if ($rvalue =~ /^\s*$/) { + delete $variable{$lvalue}; + } else { + $rvalue = process_variables($rvalue); + $variable{$lvalue} = $rvalue; + } +} + +sub process_compare { + my ($lval, $cmp, $rval) = @_; + + # remove whitespace + + $lval =~ s/^\s*//; + $lval =~ s/\s*$//; + + $rval =~ s/^\s*//; + $rval =~ s/\s*$//; + + if ($cmp eq "==") { + return $lval eq $rval; + } elsif ($cmp eq "!=") { + return $lval ne $rval; + } elsif ($cmp eq "=~") { + return $lval =~ m/$rval/; + } elsif ($cmp eq "!~") { + return $lval !~ m/$rval/; + } + + my $statement = "$lval $cmp $rval"; + my $ret = eval $statement; + + # $@ stores error of eval + if ($@) { + return -1; + } + + return $ret; +} + +sub value_defined { + my ($val) = @_; + + return defined($variable{$2}) || + defined($opt{$2}); +} + +sub process_expression { + my ($name, $val) = @_; + + my $c = $d++; + + while ($val =~ s/\(([^\(]*?)\)/\&\&\&\&VAL\&\&\&\&/) { + my $express = $1; + + if (process_expression($name, $express)) { + $val =~ s/\&\&\&\&VAL\&\&\&\&/ 1 /; + } else { + $val =~ s/\&\&\&\&VAL\&\&\&\&/ 0 /; + } + } + + $d--; + my $OR = "\\|\\|"; + my $AND = "\\&\\&"; + + while ($val =~ s/^(.*?)($OR|$AND)//) { + my $express = $1; + my $op = $2; + + if (process_expression($name, $express)) { + if ($op eq "||") { + return 1; + } + } else { + if ($op eq "&&") { + return 0; + } + } + } + + if ($val =~ /(.*)(==|\!=|>=|<=|>|<|=~|\!~)(.*)/) { + my $ret = process_compare($1, $2, $3); + if ($ret < 0) { + die "$name: $.: Unable to process comparison\n"; + } + return $ret; + } + + if ($val =~ /^\s*(NOT\s*)?DEFINED\s+(\S+)\s*$/) { + if (defined $1) { + return !value_defined($2); + } else { + return value_defined($2); + } + } + + if ($val =~ s/^\s*NOT\s+(.*)//) { + my $express = $1; + my $ret = process_expression($name, $express); + return !$ret; + } + + if ($val =~ /^\s*0\s*$/) { + return 0; + } elsif ($val =~ /^\s*\d+\s*$/) { + return 1; + } + + die ("$name: $.: Undefined content $val in if statement\n"); +} + +sub process_if { + my ($name, $value) = @_; + + # Convert variables and replace undefined ones with 0 + my $val = process_variables($value, 1); + my $ret = process_expression $name, $val; + + return $ret; +} + +sub __read_config { + my ($config, $current_test_num) = @_; + + my $in; + open($in, $config) || die "can't read file $config"; + + my $name = $config; + $name =~ s,.*/(.*),$1,; + + my $test_num = $$current_test_num; + my $default = 1; + my $repeat = 1; + my $num_tests_set = 0; + my $skip = 0; + my $rest; + my $line; + my $test_case = 0; + my $if = 0; + my $if_set = 0; + my $override = 0; + + my %overrides; + + while (<$in>) { + + # ignore blank lines and comments + next if (/^\s*$/ || /\s*\#/); + + if (/^\s*(TEST_START|DEFAULTS)\b(.*)/) { + + my $type = $1; + $rest = $2; + $line = $2; + + my $old_test_num; + my $old_repeat; + $override = 0; + + if ($type eq "TEST_START") { + if ($num_tests_set) { + die "$name: $.: Can not specify both NUM_TESTS and TEST_START\n"; + } + + $old_test_num = $test_num; + $old_repeat = $repeat; + + $test_num += $repeat; + $default = 0; + $repeat = 1; + } else { + $default = 1; + } + + # If SKIP is anywhere in the line, the command will be skipped + if ($rest =~ s/\s+SKIP\b//) { + $skip = 1; + } else { + $test_case = 1; + $skip = 0; + } + + if ($rest =~ s/\sELSE\b//) { + if (!$if) { + die "$name: $.: ELSE found with out matching IF section\n$_"; + } + $if = 0; + + if ($if_set) { + $skip = 1; + } else { + $skip = 0; + } + } + + if ($rest =~ s/\sIF\s+(.*)//) { + if (process_if($name, $1)) { + $if_set = 1; + } else { + $skip = 1; + } + $if = 1; + } else { + $if = 0; + $if_set = 0; + } + + if (!$skip) { + if ($type eq "TEST_START") { + if ($rest =~ s/\s+ITERATE\s+(\d+)//) { + $repeat = $1; + $repeat_tests{"$test_num"} = $repeat; + } + } elsif ($rest =~ s/\sOVERRIDE\b//) { + # DEFAULT only + $override = 1; + # Clear previous overrides + %overrides = (); + } + } + + if (!$skip && $rest !~ /^\s*$/) { + die "$name: $.: Garbage found after $type\n$_"; + } + + if ($skip && $type eq "TEST_START") { + $test_num = $old_test_num; + $repeat = $old_repeat; + } + } elsif (/^\s*ELSE\b(.*)$/) { + if (!$if) { + die "$name: $.: ELSE found with out matching IF section\n$_"; + } + $rest = $1; + if ($if_set) { + $skip = 1; + $rest = ""; + } else { + $skip = 0; + + if ($rest =~ /\sIF\s+(.*)/) { + # May be a ELSE IF section. + if (process_if($name, $1)) { + $if_set = 1; + } else { + $skip = 1; + } + $rest = ""; + } else { + $if = 0; + } + } + + if ($rest !~ /^\s*$/) { + die "$name: $.: Garbage found after DEFAULTS\n$_"; + } + + } elsif (/^\s*INCLUDE\s+(\S+)/) { + + next if ($skip); + + if (!$default) { + die "$name: $.: INCLUDE can only be done in default sections\n$_"; + } + + my $file = process_variables($1); + + if ($file !~ m,^/,) { + # check the path of the config file first + if ($config =~ m,(.*)/,) { + if (-f "$1/$file") { + $file = "$1/$file"; + } + } + } + + if ( ! -r $file ) { + die "$name: $.: Can't read file $file\n$_"; + } + + if (__read_config($file, \$test_num)) { + $test_case = 1; + } + + } elsif (/^\s*([A-Z_\[\]\d]+)\s*=~\s*(.*?)\s*$/) { + + next if ($skip); + + my $lvalue = $1; + my $rvalue = $2; + + if ($default || $lvalue =~ /\[\d+\]$/) { + set_eval($lvalue, $rvalue, $name); + } else { + my $val = "$lvalue\[$test_num\]"; + set_eval($val, $rvalue, $name); + } + + } elsif (/^\s*([A-Z_\[\]\d]+)\s*=\s*(.*?)\s*$/) { + + next if ($skip); + + my $lvalue = $1; + my $rvalue = $2; + + if (!$default && + ($lvalue eq "NUM_TESTS" || + $lvalue eq "LOG_FILE" || + $lvalue eq "CLEAR_LOG")) { + die "$name: $.: $lvalue must be set in DEFAULTS section\n"; + } + + if ($lvalue eq "NUM_TESTS") { + if ($test_num) { + die "$name: $.: Can not specify both NUM_TESTS and TEST_START\n"; + } + if (!$default) { + die "$name: $.: NUM_TESTS must be set in default section\n"; + } + $num_tests_set = 1; + } + + if ($default || $lvalue =~ /\[\d+\]$/) { + set_value($lvalue, $rvalue, $override, \%overrides, $name); + } else { + my $val = "$lvalue\[$test_num\]"; + set_value($val, $rvalue, $override, \%overrides, $name); + + if ($repeat > 1) { + $repeats{$val} = $repeat; + } + } + } elsif (/^\s*([A-Z_\[\]\d]+)\s*:=\s*(.*?)\s*$/) { + next if ($skip); + + my $lvalue = $1; + my $rvalue = $2; + + # process config variables. + # Config variables are only active while reading the + # config and can be defined anywhere. They also ignore + # TEST_START and DEFAULTS, but are skipped if they are in + # on of these sections that have SKIP defined. + # The save variable can be + # defined multiple times and the new one simply overrides + # the previous one. + set_variable($lvalue, $rvalue); + + } else { + die "$name: $.: Garbage found in config\n$_"; + } + } + + if ($test_num) { + $test_num += $repeat - 1; + $opt{"NUM_TESTS"} = $test_num; + } + + close($in); + + $$current_test_num = $test_num; + + return $test_case; +} + +sub get_test_case { + print "What test case would you like to run?\n"; + print " (build, install or boot)\n"; + print " Other tests are available but require editing ktest.conf\n"; + print " (see tools/testing/ktest/sample.conf)\n"; + my $ans = <STDIN>; + chomp $ans; + $default{"TEST_TYPE"} = $ans; +} + +sub read_config { + my ($config) = @_; + + my $test_case; + my $test_num = 0; + + $test_case = __read_config $config, \$test_num; + + # make sure we have all mandatory configs + get_mandatory_configs; + + # was a test specified? + if (!$test_case) { + print "No test case specified.\n"; + get_test_case; + } + + # set any defaults + + foreach my $default (keys %default) { + if (!defined($opt{$default})) { + $opt{$default} = $default{$default}; + } + } + + if ($opt{"IGNORE_UNUSED"} == 1) { + return; + } + + my %not_used; + + # check if there are any stragglers (typos?) + foreach my $option (keys %opt) { + my $op = $option; + # remove per test labels. + $op =~ s/\[.*\]//; + if (!exists($option_map{$op}) && + !exists($default{$op}) && + !exists($used_options{$op})) { + $not_used{$op} = 1; + } + } + + if (%not_used) { + my $s = "s are"; + $s = " is" if (keys %not_used == 1); + print "The following option$s not used; could be a typo:\n"; + foreach my $option (keys %not_used) { + print "$option\n"; + } + print "Set IGNORE_UNUSED = 1 to have ktest ignore unused variables\n"; + if (!read_yn "Do you want to continue?") { + exit -1; + } + } +} + +sub __eval_option { + my ($name, $option, $i) = @_; + + # Add space to evaluate the character before $ + $option = " $option"; + my $retval = ""; + my $repeated = 0; + my $parent = 0; + + foreach my $test (keys %repeat_tests) { + if ($i >= $test && + $i < $test + $repeat_tests{$test}) { + + $repeated = 1; + $parent = $test; + last; + } + } + + while ($option =~ /(.*?[^\\])\$\{(.*?)\}(.*)/) { + my $start = $1; + my $var = $2; + my $end = $3; + + # Append beginning of line + $retval = "$retval$start"; + + # If the iteration option OPT[$i] exists, then use that. + # otherwise see if the default OPT (without [$i]) exists. + + my $o = "$var\[$i\]"; + my $parento = "$var\[$parent\]"; + + # If a variable contains itself, use the default var + if (($var eq $name) && defined($opt{$var})) { + $o = $opt{$var}; + $retval = "$retval$o"; + } elsif (defined($opt{$o})) { + $o = $opt{$o}; + $retval = "$retval$o"; + } elsif ($repeated && defined($opt{$parento})) { + $o = $opt{$parento}; + $retval = "$retval$o"; + } elsif (defined($opt{$var})) { + $o = $opt{$var}; + $retval = "$retval$o"; + } elsif ($var eq "KERNEL_VERSION" && defined($make)) { + # special option KERNEL_VERSION uses kernel version + get_version(); + $retval = "$retval$version"; + } else { + $retval = "$retval\$\{$var\}"; + } + + $option = $end; + } + + $retval = "$retval$option"; + + $retval =~ s/^ //; + + return $retval; +} + +sub process_evals { + my ($name, $option, $i) = @_; + + my $option_name = "$name\[$i\]"; + my $ev; + + my $old_option = $option; + + if (defined($evals{$option_name})) { + $ev = $evals{$option_name}; + } elsif (defined($evals{$name})) { + $ev = $evals{$name}; + } else { + return $option; + } + + for my $e (@{$ev}) { + eval "\$option =~ $e"; + } + + if ($option ne $old_option) { + doprint("$name changed from '$old_option' to '$option'\n"); + } + + return $option; +} + +sub eval_option { + my ($name, $option, $i) = @_; + + my $prev = ""; + + # Since an option can evaluate to another option, + # keep iterating until we do not evaluate any more + # options. + my $r = 0; + while ($prev ne $option) { + # Check for recursive evaluations. + # 100 deep should be more than enough. + if ($r++ > 100) { + die "Over 100 evaluations occurred with $option\n" . + "Check for recursive variables\n"; + } + $prev = $option; + $option = __eval_option($name, $option, $i); + } + + $option = process_evals($name, $option, $i); + + return $option; +} + +sub reboot { + my ($time) = @_; + my $powercycle = 0; + + # test if the machine can be connected to within a few seconds + my $stat = run_ssh("echo check machine status", $connect_timeout); + if (!$stat) { + doprint("power cycle\n"); + $powercycle = 1; + } + + if ($powercycle) { + run_command "$power_cycle"; + + start_monitor; + # flush out current monitor + # May contain the reboot success line + wait_for_monitor 1; + + } else { + # Make sure everything has been written to disk + run_ssh("sync", 10); + + if (defined($time)) { + start_monitor; + # flush out current monitor + # May contain the reboot success line + wait_for_monitor 1; + } + + # try to reboot normally + if (run_command $reboot) { + if (defined($powercycle_after_reboot)) { + sleep $powercycle_after_reboot; + run_command "$power_cycle"; + } + } else { + # nope? power cycle it. + run_command "$power_cycle"; + } + } + + if (defined($time)) { + + # We only want to get to the new kernel, don't fail + # if we stumble over a call trace. + my $save_ignore_errors = $ignore_errors; + $ignore_errors = 1; + + # Look for the good kernel to boot + if (wait_for_monitor($time, "Linux version")) { + # reboot got stuck? + doprint "Reboot did not finish. Forcing power cycle\n"; + run_command "$power_cycle"; + } + + $ignore_errors = $save_ignore_errors; + + # Still need to wait for the reboot to finish + wait_for_monitor($time, $reboot_success_line); + } + if ($powercycle || $time) { + end_monitor; + } +} + +sub reboot_to_good { + my ($time) = @_; + + if (defined($switch_to_good)) { + run_command $switch_to_good; + } + + reboot $time; +} + +sub do_not_reboot { + my $i = $iteration; + + return $test_type eq "build" || $no_reboot || + ($test_type eq "patchcheck" && $opt{"PATCHCHECK_TYPE[$i]"} eq "build") || + ($test_type eq "bisect" && $opt{"BISECT_TYPE[$i]"} eq "build") || + ($test_type eq "config_bisect" && $opt{"CONFIG_BISECT_TYPE[$i]"} eq "build"); +} + +sub get_test_name() { + my $name; + + if (defined($test_name)) { + $name = "$test_name:$test_type"; + } else { + $name = $test_type; + } + return $name; +} + +sub dodie { + # avoid recursion + return if ($in_die); + $in_die = 1; + + my $i = $iteration; + + doprint "CRITICAL FAILURE... [TEST $i] ", @_, "\n"; + + if ($reboot_on_error && !do_not_reboot) { + doprint "REBOOTING\n"; + reboot_to_good; + } elsif ($poweroff_on_error && defined($power_off)) { + doprint "POWERING OFF\n"; + `$power_off`; + } + + if (defined($opt{"LOG_FILE"})) { + print " See $opt{LOG_FILE} for more info.\n"; + } + + if ($email_on_error) { + my $name = get_test_name; + my $log_file; + + if (defined($opt{"LOG_FILE"})) { + my $whence = 2; # End of file + my $log_size = tell LOG; + my $size = $log_size - $test_log_start; + + if (defined($mail_max_size)) { + if ($size > $mail_max_size) { + $size = $mail_max_size; + } + } + my $pos = - $size; + $log_file = "$tmpdir/log"; + open (L, "$opt{LOG_FILE}") or die "Can't open $opt{LOG_FILE} to read)"; + open (O, "> $tmpdir/log") or die "Can't open $tmpdir/log\n"; + seek(L, $pos, $whence); + while (<L>) { + print O; + } + close O; + close L; + } + + send_email("KTEST: critical failure for test $i [$name]", + "Your test started at $script_start_time has failed with:\n@_\n", $log_file); + } + + if ($monitor_cnt) { + # restore terminal settings + system("stty $stty_orig"); + } + + if (defined($post_test)) { + run_command $post_test; + } + + die @_, "\n"; +} + +sub create_pty { + my ($ptm, $pts) = @_; + my $tmp; + my $TIOCSPTLCK = 0x40045431; + my $TIOCGPTN = 0x80045430; + + sysopen($ptm, "/dev/ptmx", O_RDWR | O_NONBLOCK) or + dodie "Can't open /dev/ptmx"; + + # unlockpt() + $tmp = pack("i", 0); + ioctl($ptm, $TIOCSPTLCK, $tmp) or + dodie "ioctl TIOCSPTLCK for /dev/ptmx failed"; + + # ptsname() + ioctl($ptm, $TIOCGPTN, $tmp) or + dodie "ioctl TIOCGPTN for /dev/ptmx failed"; + $tmp = unpack("i", $tmp); + + sysopen($pts, "/dev/pts/$tmp", O_RDWR | O_NONBLOCK) or + dodie "Can't open /dev/pts/$tmp"; +} + +sub exec_console { + my ($ptm, $pts) = @_; + + close($ptm); + + close(\*STDIN); + close(\*STDOUT); + close(\*STDERR); + + open(\*STDIN, '<&', $pts); + open(\*STDOUT, '>&', $pts); + open(\*STDERR, '>&', $pts); + + close($pts); + + exec $console or + dodie "Can't open console $console"; +} + +sub open_console { + my ($ptm) = @_; + my $pts = \*PTSFD; + my $pid; + + # save terminal settings + $stty_orig = `stty -g`; + + # place terminal in cbreak mode so that stdin can be read one character at + # a time without having to wait for a newline + system("stty -icanon -echo -icrnl"); + + create_pty($ptm, $pts); + + $pid = fork; + + if (!$pid) { + # child + exec_console($ptm, $pts) + } + + # parent + close($pts); + + return $pid; + + open(PTSFD, "Stop perl from warning about single use of PTSFD"); +} + +sub close_console { + my ($fp, $pid) = @_; + + doprint "kill child process $pid\n"; + kill $close_console_signal, $pid; + + doprint "wait for child process $pid to exit\n"; + waitpid($pid, 0); + + print "closing!\n"; + close($fp); + + # restore terminal settings + system("stty $stty_orig"); +} + +sub start_monitor { + if ($monitor_cnt++) { + return; + } + $monitor_fp = \*MONFD; + $monitor_pid = open_console $monitor_fp; + + return; + + open(MONFD, "Stop perl from warning about single use of MONFD"); +} + +sub end_monitor { + return if (!defined $console); + if (--$monitor_cnt) { + return; + } + close_console($monitor_fp, $monitor_pid); +} + +sub wait_for_monitor { + my ($time, $stop) = @_; + my $full_line = ""; + my $line; + my $booted = 0; + my $start_time = time; + my $skip_call_trace = 0; + my $bug = 0; + my $bug_ignored = 0; + my $now; + + doprint "** Wait for monitor to settle down **\n"; + + # read the monitor and wait for the system to calm down + while (!$booted) { + $line = wait_for_input($monitor_fp, $time); + last if (!defined($line)); + print "$line"; + $full_line .= $line; + + if (defined($stop) && $full_line =~ /$stop/) { + doprint "wait for monitor detected $stop\n"; + $booted = 1; + } + + if ($full_line =~ /\[ backtrace testing \]/) { + $skip_call_trace = 1; + } + + if ($full_line =~ /call trace:/i) { + if (!$bug && !$skip_call_trace) { + if ($ignore_errors) { + $bug_ignored = 1; + } else { + $bug = 1; + } + } + } + + if ($full_line =~ /\[ end of backtrace testing \]/) { + $skip_call_trace = 0; + } + + if ($full_line =~ /Kernel panic -/) { + $bug = 1; + } + + if ($line =~ /\n/) { + $full_line = ""; + } + $now = time; + if ($now - $start_time >= $max_monitor_wait) { + doprint "Exiting monitor flush due to hitting MAX_MONITOR_WAIT\n"; + return 1; + } + } + print "** Monitor flushed **\n"; + + # if stop is defined but wasn't hit, return error + # used by reboot (which wants to see a reboot) + if (defined($stop) && !$booted) { + $bug = 1; + } + return $bug; +} + +sub save_logs { + my ($result, $basedir) = @_; + my @t = localtime; + my $date = sprintf "%04d%02d%02d%02d%02d%02d", + 1900+$t[5],$t[4],$t[3],$t[2],$t[1],$t[0]; + + my $type = $build_type; + if ($type =~ /useconfig/) { + $type = "useconfig"; + } + + my $dir = "$machine-$test_type-$type-$result-$date"; + + $dir = "$basedir/$dir"; + + if (!-d $dir) { + mkpath($dir) or + dodie "can't create $dir"; + } + + my %files = ( + "config" => $output_config, + "buildlog" => $buildlog, + "dmesg" => $dmesg, + "testlog" => $testlog, + ); + + while (my ($name, $source) = each(%files)) { + if (-f "$source") { + cp "$source", "$dir/$name" or + dodie "failed to copy $source"; + } + } + + doprint "*** Saved info to $dir ***\n"; +} + +sub fail { + + if ($die_on_failure) { + dodie @_; + } + + doprint "FAILED\n"; + + my $i = $iteration; + + # no need to reboot for just building. + if (!do_not_reboot) { + doprint "REBOOTING\n"; + reboot_to_good $sleep_time; + } + + my $name = ""; + + if (defined($test_name)) { + $name = " ($test_name)"; + } + + print_times; + + doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n"; + doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n"; + doprint "KTEST RESULT: TEST $i$name Failed: ", @_, "\n"; + doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n"; + doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n"; + + if (defined($store_failures)) { + save_logs "fail", $store_failures; + } + + if (defined($post_test)) { + run_command $post_test; + } + + return 1; +} + +sub run_command { + my ($command, $redirect, $timeout) = @_; + my $start_time; + my $end_time; + my $dolog = 0; + my $dord = 0; + my $dostdout = 0; + my $pid; + my $command_orig = $command; + + $command =~ s/\$SSH_USER/$ssh_user/g; + $command =~ s/\$MACHINE/$machine/g; + + if (!defined($timeout)) { + $timeout = $run_timeout; + } + + if (!defined($timeout)) { + $timeout = -1; # tell wait_for_input to wait indefinitely + } + + doprint("$command ... "); + $start_time = time; + + $pid = open(CMD, "$command 2>&1 |") or + (fail "unable to exec $command" and return 0); + + if (defined($opt{"LOG_FILE"})) { + $dolog = 1; + } + + if (defined($redirect)) { + if ($redirect eq 1) { + $dostdout = 1; + # Have the output of the command on its own line + doprint "\n"; + } else { + open (RD, ">$redirect") or + dodie "failed to write to redirect $redirect"; + $dord = 1; + } + } + + my $hit_timeout = 0; + + while (1) { + my $fp = \*CMD; + my $line = wait_for_input($fp, $timeout); + if (!defined($line)) { + my $now = time; + if ($timeout >= 0 && (($now - $start_time) >= $timeout)) { + doprint "Hit timeout of $timeout, killing process\n"; + $hit_timeout = 1; + kill 9, $pid; + } + last; + } + print LOG $line if ($dolog); + print RD $line if ($dord); + print $line if ($dostdout); + } + + waitpid($pid, 0); + # shift 8 for real exit status + $run_command_status = $? >> 8; + + if ($command_orig eq $default{REBOOT} && + $run_command_status == $reboot_return_code) { + $run_command_status = 0; + } + + close(CMD); + close(RD) if ($dord); + + $end_time = time; + my $delta = $end_time - $start_time; + + if ($delta == 1) { + doprint "[1 second] "; + } else { + doprint "[$delta seconds] "; + } + + if ($hit_timeout) { + $run_command_status = 1; + } + + if ($run_command_status) { + doprint "FAILED!\n"; + } else { + doprint "SUCCESS\n"; + } + + return !$run_command_status; +} + +sub run_ssh { + my ($cmd, $timeout) = @_; + my $cp_exec = $ssh_exec; + + $cp_exec =~ s/\$SSH_COMMAND/$cmd/g; + return run_command "$cp_exec", undef , $timeout; +} + +sub run_scp { + my ($src, $dst, $cp_scp) = @_; + + $cp_scp =~ s/\$SRC_FILE/$src/g; + $cp_scp =~ s/\$DST_FILE/$dst/g; + + return run_command "$cp_scp"; +} + +sub run_scp_install { + my ($src, $dst) = @_; + + my $cp_scp = $scp_to_target_install; + + return run_scp($src, $dst, $cp_scp); +} + +sub run_scp_mod { + my ($src, $dst) = @_; + + my $cp_scp = $scp_to_target; + + return run_scp($src, $dst, $cp_scp); +} + +sub _get_grub_index { + + my ($command, $target, $skip, $submenu) = @_; + + return if (defined($grub_number) && defined($last_grub_menu) && + $last_grub_menu eq $grub_menu && defined($last_machine) && + $last_machine eq $machine); + + doprint "Find $reboot_type menu ... "; + $grub_number = -1; + + my $ssh_grub = $ssh_exec; + $ssh_grub =~ s,\$SSH_COMMAND,$command,g; + + open(IN, "$ssh_grub |") or + dodie "unable to execute $command"; + + my $found = 0; + + my $submenu_number = 0; + + while (<IN>) { + if (/$target/) { + $grub_number++; + $found = 1; + last; + } elsif (defined($submenu) && /$submenu/) { + $submenu_number++; + $grub_number = -1; + } elsif (/$skip/) { + $grub_number++; + } + } + close(IN); + + dodie "Could not find '$grub_menu' through $command on $machine" + if (!$found); + if ($submenu_number > 0) { + $grub_number = "$submenu_number>$grub_number"; + } + doprint "$grub_number\n"; + $last_grub_menu = $grub_menu; + $last_machine = $machine; +} + +sub get_grub_index { + + my $command; + my $target; + my $skip; + my $submenu; + my $grub_menu_qt; + + if ($reboot_type !~ /^grub/) { + return; + } + + $grub_menu_qt = quotemeta($grub_menu); + + if ($reboot_type eq "grub") { + $command = "cat /boot/grub/menu.lst"; + $target = '^\s*title\s+' . $grub_menu_qt . '\s*$'; + $skip = '^\s*title\s'; + } elsif ($reboot_type eq "grub2") { + $command = "cat $grub_file"; + $target = '^\s*menuentry.*' . $grub_menu_qt; + $skip = '^\s*menuentry'; + $submenu = '^\s*submenu\s'; + } elsif ($reboot_type eq "grub2bls") { + $command = $grub_bls_get; + $target = '^title=.*' . $grub_menu_qt; + $skip = '^title='; + } else { + return; + } + + _get_grub_index($command, $target, $skip, $submenu); +} + +sub wait_for_input { + my ($fp, $time) = @_; + my $start_time; + my $rin; + my $rout; + my $nr; + my $buf; + my $line; + my $ch; + + if (!defined($time)) { + $time = $timeout; + } + + if ($time < 0) { + # Negative number means wait indefinitely + undef $time; + } + + $rin = ''; + vec($rin, fileno($fp), 1) = 1; + vec($rin, fileno(\*STDIN), 1) = 1; + + $start_time = time; + + while (1) { + $nr = select($rout=$rin, undef, undef, $time); + + last if ($nr <= 0); + + # copy data from stdin to the console + if (vec($rout, fileno(\*STDIN), 1) == 1) { + $nr = sysread(\*STDIN, $buf, 1000); + syswrite($fp, $buf, $nr) if ($nr > 0); + } + + # The timeout is based on time waiting for the fp data + if (vec($rout, fileno($fp), 1) != 1) { + last if (defined($time) && (time - $start_time > $time)); + next; + } + + $line = ""; + + # try to read one char at a time + while (sysread $fp, $ch, 1) { + $line .= $ch; + last if ($ch eq "\n"); + } + + last if (!length($line)); + + return $line; + } + return undef; +} + +sub reboot_to { + if (defined($switch_to_test)) { + run_command $switch_to_test; + } + + if ($reboot_type eq "grub") { + run_ssh "'(echo \"savedefault --default=$grub_number --once\" | grub --batch)'"; + } elsif (($reboot_type eq "grub2") or ($reboot_type eq "grub2bls")) { + run_ssh "$grub_reboot \"'$grub_number'\""; + } elsif ($reboot_type eq "syslinux") { + run_ssh "$syslinux --once \\\"$syslinux_label\\\" $syslinux_path"; + } elsif (defined $reboot_script) { + run_command "$reboot_script"; + } + reboot; +} + +sub get_sha1 { + my ($commit) = @_; + + doprint "git rev-list --max-count=1 $commit ... "; + my $sha1 = `git rev-list --max-count=1 $commit`; + my $ret = $?; + + logit $sha1; + + if ($ret) { + doprint "FAILED\n"; + dodie "Failed to get git $commit"; + } + + print "SUCCESS\n"; + + chomp $sha1; + + return $sha1; +} + +sub monitor { + my $booted = 0; + my $bug = 0; + my $bug_ignored = 0; + my $skip_call_trace = 0; + my $loops; + + my $start_time = time; + + wait_for_monitor 5; + + my $line; + my $full_line = ""; + + open(DMESG, "> $dmesg") or + dodie "unable to write to $dmesg"; + + reboot_to; + + my $success_start; + my $failure_start; + my $monitor_start = time; + my $done = 0; + my $version_found = 0; + + while (!$done) { + if ($bug && defined($stop_after_failure) && + $stop_after_failure >= 0) { + my $time = $stop_after_failure - (time - $failure_start); + $line = wait_for_input($monitor_fp, $time); + if (!defined($line)) { + doprint "bug timed out after $booted_timeout seconds\n"; + doprint "Test forced to stop after $stop_after_failure seconds after failure\n"; + last; + } + } elsif ($booted) { + $line = wait_for_input($monitor_fp, $booted_timeout); + if (!defined($line)) { + my $s = $booted_timeout == 1 ? "" : "s"; + doprint "Successful boot found: break after $booted_timeout second$s\n"; + last; + } + } else { + $line = wait_for_input($monitor_fp); + if (!defined($line)) { + my $s = $timeout == 1 ? "" : "s"; + doprint "Timed out after $timeout second$s\n"; + last; + } + } + + doprint $line; + print DMESG $line; + + # we are not guaranteed to get a full line + $full_line .= $line; + + if ($full_line =~ /$success_line/) { + $booted = 1; + $success_start = time; + } + + if ($booted && defined($stop_after_success) && + $stop_after_success >= 0) { + my $now = time; + if ($now - $success_start >= $stop_after_success) { + doprint "Test forced to stop after $stop_after_success seconds after success\n"; + last; + } + } + + if ($full_line =~ /\[ backtrace testing \]/) { + $skip_call_trace = 1; + } + + if ($full_line =~ /call trace:/i) { + if (!$bug && !$skip_call_trace) { + if ($ignore_errors) { + $bug_ignored = 1; + } else { + $bug = 1; + $failure_start = time; + } + } + } + + if ($bug && defined($stop_after_failure) && + $stop_after_failure >= 0) { + my $now = time; + if ($now - $failure_start >= $stop_after_failure) { + doprint "Test forced to stop after $stop_after_failure seconds after failure\n"; + last; + } + } + + if ($full_line =~ /\[ end of backtrace testing \]/) { + $skip_call_trace = 0; + } + + if ($full_line =~ /Kernel panic -/) { + $failure_start = time; + $bug = 1; + } + + # Detect triple faults by testing the banner + if ($full_line =~ /\bLinux version (\S+).*\n/) { + if ($1 eq $version) { + $version_found = 1; + } elsif ($version_found && $detect_triplefault) { + # We already booted into the kernel we are testing, + # but now we booted into another kernel? + # Consider this a triple fault. + doprint "Already booted in Linux kernel $version, but now\n"; + doprint "we booted into Linux kernel $1.\n"; + doprint "Assuming that this is a triple fault.\n"; + doprint "To disable this: set DETECT_TRIPLE_FAULT to 0\n"; + last; + } + } + + if ($line =~ /\n/) { + $full_line = ""; + } + + if ($stop_test_after > 0 && !$booted && !$bug) { + if (time - $monitor_start > $stop_test_after) { + doprint "STOP_TEST_AFTER ($stop_test_after seconds) timed out\n"; + $done = 1; + } + } + } + + my $end_time = time; + $reboot_time = $end_time - $start_time; + + close(DMESG); + + if ($bug) { + return 0 if ($in_bisect); + fail "failed - got a bug report" and return 0; + } + + if (!$booted) { + return 0 if ($in_bisect); + fail "failed - never got a boot prompt." and return 0; + } + + if ($bug_ignored) { + doprint "WARNING: Call Trace detected but ignored due to IGNORE_ERRORS=1\n"; + } + + return 1; +} + +sub eval_kernel_version { + my ($option) = @_; + + $option =~ s/\$KERNEL_VERSION/$version/g; + + return $option; +} + +sub do_post_install { + + return if (!defined($post_install)); + + my $cp_post_install = eval_kernel_version $post_install; + run_command "$cp_post_install" or + dodie "Failed to run post install"; +} + +# Sometimes the reboot fails, and will hang. We try to ssh to the box +# and if we fail, we force another reboot, that should powercycle it. +sub test_booted { + if (!run_ssh "echo testing connection") { + reboot $sleep_time; + } +} + +sub install { + + return if ($no_install); + + my $start_time = time; + + if (defined($pre_install)) { + my $cp_pre_install = eval_kernel_version $pre_install; + run_command "$cp_pre_install" or + dodie "Failed to run pre install"; + } + + my $cp_target = eval_kernel_version $target_image; + + test_booted; + + run_scp_install "$outputdir/$build_target", "$cp_target" or + dodie "failed to copy image"; + + my $install_mods = 0; + + # should we process modules? + $install_mods = 0; + open(IN, "$output_config") or dodie("Can't read config file"); + while (<IN>) { + if (/CONFIG_MODULES(=y)?/) { + if (defined($1)) { + $install_mods = 1; + last; + } + } + } + close(IN); + + if (!$install_mods) { + do_post_install; + doprint "No modules needed\n"; + my $end_time = time; + $install_time = $end_time - $start_time; + return; + } + + run_command "$make INSTALL_MOD_STRIP=1 INSTALL_MOD_PATH=$tmpdir modules_install" or + dodie "Failed to install modules"; + + my $modlib = "/lib/modules/$version"; + my $modtar = "ktest-mods.tar.bz2"; + + run_ssh "rm -rf $modlib" or + dodie "failed to remove old mods: $modlib"; + + # would be nice if scp -r did not follow symbolic links + run_command "cd $tmpdir && tar -cjf $modtar lib/modules/$version" or + dodie "making tarball"; + + run_scp_mod "$tmpdir/$modtar", "/tmp" or + dodie "failed to copy modules"; + + unlink "$tmpdir/$modtar"; + + run_ssh "'(cd / && tar xjf /tmp/$modtar)'" or + dodie "failed to tar modules"; + + run_ssh "rm -f /tmp/$modtar"; + + do_post_install; + + my $end_time = time; + $install_time = $end_time - $start_time; +} + +sub get_version { + # get the release name + return if ($have_version); + doprint "$make kernelrelease ... "; + $version = `$make -s kernelrelease | tail -1`; + chomp($version); + doprint "$version\n"; + $have_version = 1; +} + +sub start_monitor_and_install { + # Make sure the stable kernel has finished booting + + # Install bisects, don't need console + if (defined $console) { + start_monitor; + wait_for_monitor 5; + end_monitor; + } + + get_grub_index; + get_version; + install; + + start_monitor if (defined $console); + return monitor; +} + +sub process_warning_line { + my ($line) = @_; + + chomp $line; + + # for distcc heterogeneous systems, some compilers + # do things differently causing warning lines + # to be slightly different. This makes an attempt + # to fixe those issues. + + # chop off the index into the line + # using distcc, some compilers give different indexes + # depending on white space + $line =~ s/^(\s*\S+:\d+:)\d+/$1/; + + # Some compilers use UTF-8 extended for quotes and some don't. + $line =~ s/$utf8_quote/'/g; + + return $line; +} + +# Read buildlog and check against warnings file for any +# new warnings. +# +# Returns 1 if OK +# 0 otherwise +sub check_buildlog { + return 1 if (!defined $warnings_file); + + my %warnings_list; + + # Failed builds should not reboot the target + my $save_no_reboot = $no_reboot; + $no_reboot = 1; + + if (-f $warnings_file) { + open(IN, $warnings_file) or + dodie "Error opening $warnings_file"; + + while (<IN>) { + if (/$check_build_re/) { + my $warning = process_warning_line $_; + + $warnings_list{$warning} = 1; + } + } + close(IN); + } + + # If warnings file didn't exist, and WARNINGS_FILE exist, + # then we fail on any warning! + + open(IN, $buildlog) or dodie "Can't open $buildlog"; + while (<IN>) { + if (/$check_build_re/) { + my $warning = process_warning_line $_; + + if (!defined $warnings_list{$warning}) { + fail "New warning found (not in $warnings_file)\n$_\n"; + $no_reboot = $save_no_reboot; + return 0; + } + } + } + $no_reboot = $save_no_reboot; + close(IN); +} + +sub check_patch_buildlog { + my ($patch) = @_; + + my @files = `git show $patch | diffstat -l`; + + foreach my $file (@files) { + chomp $file; + } + + open(IN, "git show $patch |") or + dodie "failed to show $patch"; + while (<IN>) { + if (m,^--- a/(.*),) { + chomp $1; + $files[$#files] = $1; + } + } + close(IN); + + open(IN, $buildlog) or dodie "Can't open $buildlog"; + while (<IN>) { + if (/^\s*(.*?):.*(warning|error)/) { + my $err = $1; + foreach my $file (@files) { + my $fullpath = "$builddir/$file"; + if ($file eq $err || $fullpath eq $err) { + fail "$file built with warnings" and return 0; + } + } + } + } + close(IN); + + return 1; +} + +sub apply_min_config { + my $outconfig = "$output_config.new"; + + # Read the config file and remove anything that + # is in the force_config hash (from minconfig and others) + # then add the force config back. + + doprint "Applying minimum configurations into $output_config.new\n"; + + open (OUT, ">$outconfig") or + dodie "Can't create $outconfig"; + + if (-f $output_config) { + open (IN, $output_config) or + dodie "Failed to open $output_config"; + while (<IN>) { + if (/^(# )?(CONFIG_[^\s=]*)/) { + next if (defined($force_config{$2})); + } + print OUT; + } + close IN; + } + foreach my $config (keys %force_config) { + print OUT "$force_config{$config}\n"; + } + close OUT; + + run_command "mv $outconfig $output_config"; +} + +sub make_oldconfig { + + my @force_list = keys %force_config; + + if ($#force_list >= 0) { + apply_min_config; + } + + if (!run_command "$make olddefconfig") { + # Perhaps olddefconfig doesn't exist in this version of the kernel + # try oldnoconfig + doprint "olddefconfig failed, trying make oldnoconfig\n"; + if (!run_command "$make oldnoconfig") { + doprint "oldnoconfig failed, trying yes '' | make oldconfig\n"; + # try a yes '' | oldconfig + run_command "yes '' | $make oldconfig" or + dodie "failed make config oldconfig"; + } + } +} + +# read a config file and use this to force new configs. +sub load_force_config { + my ($config) = @_; + + doprint "Loading force configs from $config\n"; + open(IN, $config) or + dodie "failed to read $config"; + while (<IN>) { + chomp; + if (/^(CONFIG[^\s=]*)(\s*=.*)/) { + $force_config{$1} = $_; + } elsif (/^# (CONFIG_\S*) is not set/) { + $force_config{$1} = $_; + } + } + close IN; +} + +sub build { + my ($type) = @_; + + unlink $buildlog; + + my $start_time = time; + + # Failed builds should not reboot the target + my $save_no_reboot = $no_reboot; + $no_reboot = 1; + + # Calculate a new version from here. + $have_version = 0; + + if (defined($pre_build)) { + my $ret = run_command $pre_build; + if (!$ret && defined($pre_build_die) && + $pre_build_die) { + dodie "failed to pre_build\n"; + } + } + + if ($type =~ /^useconfig:(.*)/) { + run_command "cp $1 $output_config" or + dodie "could not copy $1 to .config"; + + $type = "oldconfig"; + } + + # old config can ask questions + if ($type eq "oldconfig") { + $type = "olddefconfig"; + + # allow for empty configs + run_command "touch $output_config"; + + if (!$noclean) { + run_command "mv $output_config $outputdir/config_temp" or + dodie "moving .config"; + + run_command "$make mrproper" or dodie "make mrproper"; + + run_command "mv $outputdir/config_temp $output_config" or + dodie "moving config_temp"; + } + } elsif (!$noclean) { + unlink "$output_config"; + run_command "$make mrproper" or + dodie "make mrproper"; + } + + # add something to distinguish this build + open(OUT, "> $outputdir/localversion") or dodie("Can't make localversion file"); + print OUT "$localversion\n"; + close(OUT); + + if (defined($minconfig)) { + load_force_config($minconfig); + } + + if ($type ne "olddefconfig") { + run_command "$make $type" or + dodie "failed make config"; + } + # Run old config regardless, to enforce min configurations + make_oldconfig; + + if (not defined($build_options)){ + $build_options = ""; + } + my $build_ret = run_command "$make $build_options", $buildlog; + + if (defined($post_build)) { + # Because a post build may change the kernel version + # do it now. + get_version; + my $ret = run_command $post_build; + if (!$ret && defined($post_build_die) && + $post_build_die) { + dodie "failed to post_build\n"; + } + } + + if (!$build_ret) { + # bisect may need this to pass + if ($in_bisect) { + $no_reboot = $save_no_reboot; + return 0; + } + fail "failed build" and return 0; + } + + $no_reboot = $save_no_reboot; + + my $end_time = time; + $build_time = $end_time - $start_time; + + return 1; +} + +sub halt { + if (!run_ssh "halt" or defined($power_off)) { + if (defined($poweroff_after_halt)) { + sleep $poweroff_after_halt; + run_command "$power_off"; + } + } else { + # nope? the zap it! + run_command "$power_off"; + } +} + +sub success { + my ($i) = @_; + + $successes++; + + my $name = ""; + + if (defined($test_name)) { + $name = " ($test_name)"; + } + + print_times; + + doprint "\n\n"; + doprint "*******************************************\n"; + doprint "*******************************************\n"; + doprint "KTEST RESULT: TEST $i$name SUCCESS!!!! **\n"; + doprint "*******************************************\n"; + doprint "*******************************************\n"; + + if (defined($store_successes)) { + save_logs "success", $store_successes; + } + + if ($i != $opt{"NUM_TESTS"} && !do_not_reboot) { + doprint "Reboot and wait $sleep_time seconds\n"; + reboot_to_good $sleep_time; + } + + if (defined($post_test)) { + run_command $post_test; + } +} + +sub answer_bisect { + for (;;) { + doprint "Pass, fail, or skip? [p/f/s]"; + my $ans = <STDIN>; + chomp $ans; + if ($ans eq "p" || $ans eq "P") { + return 1; + } elsif ($ans eq "f" || $ans eq "F") { + return 0; + } elsif ($ans eq "s" || $ans eq "S") { + return -1; + } else { + print "Please answer 'p', 'f', or 's'\n"; + } + } +} + +sub child_run_test { + + # child should have no power + $reboot_on_error = 0; + $poweroff_on_error = 0; + $die_on_failure = 1; + + run_command $run_test, $testlog; + + exit $run_command_status; +} + +sub child_finished { + $child_done = 1; +} + +sub do_run_test { + my $child_pid; + my $child_exit; + my $line; + my $full_line; + my $bug = 0; + my $bug_ignored = 0; + + my $start_time = time; + + wait_for_monitor 1; + + doprint "run test $run_test\n"; + + $child_done = 0; + + $SIG{CHLD} = qw(child_finished); + + $child_pid = fork; + + child_run_test if (!$child_pid); + + $full_line = ""; + + do { + $line = wait_for_input($monitor_fp, 1); + if (defined($line)) { + + # we are not guaranteed to get a full line + $full_line .= $line; + doprint $line; + + if ($full_line =~ /call trace:/i) { + if ($ignore_errors) { + $bug_ignored = 1; + } else { + $bug = 1; + } + } + + if ($full_line =~ /Kernel panic -/) { + $bug = 1; + } + + if ($line =~ /\n/) { + $full_line = ""; + } + } + } while (!$child_done && !$bug); + + if (!$bug && $bug_ignored) { + doprint "WARNING: Call Trace detected but ignored due to IGNORE_ERRORS=1\n"; + } + + if ($bug) { + my $failure_start = time; + my $now; + do { + $line = wait_for_input($monitor_fp, 1); + if (defined($line)) { + doprint $line; + } + $now = time; + if ($now - $failure_start >= $stop_after_failure) { + last; + } + } while (defined($line)); + + doprint "Detected kernel crash!\n"; + # kill the child with extreme prejudice + kill 9, $child_pid; + } + + waitpid $child_pid, 0; + $child_exit = $? >> 8; + + my $end_time = time; + $test_time = $end_time - $start_time; + + if (!$bug && $in_bisect) { + if (defined($bisect_ret_good)) { + if ($child_exit == $bisect_ret_good) { + return 1; + } + } + if (defined($bisect_ret_skip)) { + if ($child_exit == $bisect_ret_skip) { + return -1; + } + } + if (defined($bisect_ret_abort)) { + if ($child_exit == $bisect_ret_abort) { + fail "test abort" and return -2; + } + } + if (defined($bisect_ret_bad)) { + if ($child_exit == $bisect_ret_skip) { + return 0; + } + } + if (defined($bisect_ret_default)) { + if ($bisect_ret_default eq "good") { + return 1; + } elsif ($bisect_ret_default eq "bad") { + return 0; + } elsif ($bisect_ret_default eq "skip") { + return -1; + } elsif ($bisect_ret_default eq "abort") { + return -2; + } else { + fail "unknown default action: $bisect_ret_default" + and return -2; + } + } + } + + if ($bug || $child_exit) { + return 0 if $in_bisect; + fail "test failed" and return 0; + } + return 1; +} + +sub run_git_bisect { + my ($command) = @_; + + doprint "$command ... "; + + my $output = `$command 2>&1`; + my $ret = $?; + + logit $output; + + if ($ret) { + doprint "FAILED\n"; + dodie "Failed to git bisect"; + } + + doprint "SUCCESS\n"; + if ($output =~ m/^(Bisecting: .*\(roughly \d+ steps?\))\s+\[([[:xdigit:]]+)\]/) { + doprint "$1 [$2]\n"; + } elsif ($output =~ m/^([[:xdigit:]]+) is the first bad commit/) { + $bisect_bad_commit = $1; + doprint "Found bad commit... $1\n"; + return 0; + } else { + # we already logged it, just print it now. + print $output; + } + + return 1; +} + +sub bisect_reboot { + doprint "Reboot and sleep $bisect_sleep_time seconds\n"; + reboot_to_good $bisect_sleep_time; +} + +# returns 1 on success, 0 on failure, -1 on skip +sub run_bisect_test { + my ($type, $buildtype) = @_; + + my $failed = 0; + my $result; + my $output; + my $ret; + + $in_bisect = 1; + + build $buildtype or $failed = 1; + + if ($type ne "build") { + if ($failed && $bisect_skip) { + $in_bisect = 0; + return -1; + } + dodie "Failed on build" if $failed; + + # Now boot the box + start_monitor_and_install or $failed = 1; + + if ($type ne "boot") { + if ($failed && $bisect_skip) { + end_monitor; + bisect_reboot; + $in_bisect = 0; + return -1; + } + dodie "Failed on boot" if $failed; + + do_run_test or $failed = 1; + } + end_monitor; + } + + if ($failed) { + $result = 0; + } else { + $result = 1; + } + + # reboot the box to a kernel we can ssh to + if ($type ne "build") { + bisect_reboot; + } + $in_bisect = 0; + + return $result; +} + +sub run_bisect { + my ($type) = @_; + my $buildtype = "oldconfig"; + + # We should have a minconfig to use? + if (defined($minconfig)) { + $buildtype = "useconfig:$minconfig"; + } + + # If the user sets bisect_tries to less than 1, then no tries + # is a success. + my $ret = 1; + + # Still let the user manually decide that though. + if ($bisect_tries < 1 && $bisect_manual) { + $ret = answer_bisect; + } + + for (my $i = 0; $i < $bisect_tries; $i++) { + if ($bisect_tries > 1) { + my $t = $i + 1; + doprint("Running bisect trial $t of $bisect_tries:\n"); + } + $ret = run_bisect_test $type, $buildtype; + + if ($bisect_manual) { + $ret = answer_bisect; + } + + last if (!$ret); + } + + # Are we looking for where it worked, not failed? + if ($reverse_bisect && $ret >= 0) { + $ret = !$ret; + } + + if ($ret > 0) { + return "good"; + } elsif ($ret == 0) { + return "bad"; + } elsif ($bisect_skip) { + doprint "HIT A BAD COMMIT ... SKIPPING\n"; + return "skip"; + } +} + +sub update_bisect_replay { + my $tmp_log = "$tmpdir/ktest_bisect_log"; + run_command "git bisect log > $tmp_log" or + dodie "can't create bisect log"; + return $tmp_log; +} + +sub bisect { + my ($i) = @_; + + my $result; + + dodie "BISECT_GOOD[$i] not defined\n" if (!defined($bisect_good)); + dodie "BISECT_BAD[$i] not defined\n" if (!defined($bisect_bad)); + dodie "BISECT_TYPE[$i] not defined\n" if (!defined($bisect_type)); + + my $good = $bisect_good; + my $bad = $bisect_bad; + my $type = $bisect_type; + my $start = $bisect_start; + my $replay = $bisect_replay; + my $start_files = $bisect_files; + + if (defined($start_files)) { + $start_files = " -- " . $start_files; + } else { + $start_files = ""; + } + + # convert to true sha1's + $good = get_sha1($good); + $bad = get_sha1($bad); + + if (defined($bisect_reverse) && $bisect_reverse == 1) { + doprint "Performing a reverse bisect (bad is good, good is bad!)\n"; + $reverse_bisect = 1; + } else { + $reverse_bisect = 0; + } + + # Can't have a test without having a test to run + if ($type eq "test" && !defined($run_test)) { + $type = "boot"; + } + + # Check if a bisect was running + my $bisect_start_file = "$builddir/.git/BISECT_START"; + + my $check = $bisect_check; + my $do_check = defined($check) && $check ne "0"; + + if ( -f $bisect_start_file ) { + print "Bisect in progress found\n"; + if ($do_check) { + print " If you say yes, then no checks of good or bad will be done\n"; + } + if (defined($replay)) { + print "** BISECT_REPLAY is defined in config file **"; + print " Ignore config option and perform new git bisect log?\n"; + if (read_ync " (yes, no, or cancel) ") { + $replay = update_bisect_replay; + $do_check = 0; + } + } elsif (read_yn "read git log and continue?") { + $replay = update_bisect_replay; + $do_check = 0; + } + } + + if ($do_check) { + # get current HEAD + my $head = get_sha1("HEAD"); + + if ($check ne "good") { + doprint "TESTING BISECT BAD [$bad]\n"; + run_command "git checkout $bad" or + dodie "Failed to checkout $bad"; + + $result = run_bisect $type; + + if ($result ne "bad") { + fail "Tested BISECT_BAD [$bad] and it succeeded" and return 0; + } + } + + if ($check ne "bad") { + doprint "TESTING BISECT GOOD [$good]\n"; + run_command "git checkout $good" or + dodie "Failed to checkout $good"; + + $result = run_bisect $type; + + if ($result ne "good") { + fail "Tested BISECT_GOOD [$good] and it failed" and return 0; + } + } + + # checkout where we started + run_command "git checkout $head" or + dodie "Failed to checkout $head"; + } + + run_command "git bisect start$start_files" or + dodie "could not start bisect"; + + if (defined($replay)) { + run_command "git bisect replay $replay" or + dodie "failed to run replay"; + } else { + run_command "git bisect good $good" or + dodie "could not set bisect good to $good"; + + run_git_bisect "git bisect bad $bad" or + dodie "could not set bisect bad to $bad"; + } + + if (defined($start)) { + run_command "git checkout $start" or + dodie "failed to checkout $start"; + } + + my $test; + do { + $result = run_bisect $type; + $test = run_git_bisect "git bisect $result"; + print_times; + } while ($test); + + run_command "git bisect log" or + dodie "could not capture git bisect log"; + + run_command "git bisect reset" or + dodie "could not reset git bisect"; + + doprint "Bad commit was [$bisect_bad_commit]\n"; + + success $i; +} + +sub assign_configs { + my ($hash, $config) = @_; + + doprint "Reading configs from $config\n"; + + open (IN, $config) or + dodie "Failed to read $config"; + + while (<IN>) { + chomp; + if (/^((CONFIG\S*)=.*)/) { + ${$hash}{$2} = $1; + } elsif (/^(# (CONFIG\S*) is not set)/) { + ${$hash}{$2} = $1; + } + } + + close(IN); +} + +sub process_config_ignore { + my ($config) = @_; + + assign_configs \%config_ignore, $config; +} + +sub get_dependencies { + my ($config) = @_; + + my $arr = $dependency{$config}; + if (!defined($arr)) { + return (); + } + + my @deps = @{$arr}; + + foreach my $dep (@{$arr}) { + print "ADD DEP $dep\n"; + @deps = (@deps, get_dependencies $dep); + } + + return @deps; +} + +sub save_config { + my ($pc, $file) = @_; + + my %configs = %{$pc}; + + doprint "Saving configs into $file\n"; + + open(OUT, ">$file") or dodie "Can not write to $file"; + + foreach my $config (keys %configs) { + print OUT "$configs{$config}\n"; + } + close(OUT); +} + +sub create_config { + my ($name, $pc) = @_; + + doprint "Creating old config from $name configs\n"; + + save_config $pc, $output_config; + + make_oldconfig; +} + +sub run_config_bisect_test { + my ($type) = @_; + + my $ret = run_bisect_test $type, "oldconfig"; + + if ($bisect_manual) { + $ret = answer_bisect; + } + + return $ret; +} + +sub config_bisect_end { + my ($good, $bad) = @_; + my $diffexec = "diff -u"; + + if (-f "$builddir/scripts/diffconfig") { + $diffexec = "$builddir/scripts/diffconfig"; + } + doprint "\n\n***************************************\n"; + doprint "No more config bisecting possible.\n"; + run_command "$diffexec $good $bad", 1; + doprint "***************************************\n\n"; +} + +sub run_config_bisect { + my ($good, $bad, $last_result) = @_; + my $reset = ""; + my $cmd; + my $ret; + + if (!length($last_result)) { + $reset = "-r"; + } + run_command "$config_bisect_exec $reset -b $outputdir $good $bad $last_result", 1; + + # config-bisect returns: + # 0 if there is more to bisect + # 1 for finding a good config + # 2 if it can not find any more configs + # -1 (255) on error + if ($run_command_status) { + return $run_command_status; + } + + $ret = run_config_bisect_test $config_bisect_type; + if ($ret) { + doprint "NEW GOOD CONFIG ($pass)\n"; + system("cp $output_config $tmpdir/good_config.tmp.$pass"); + $pass++; + # Return 3 for good config + return 3; + } else { + doprint "NEW BAD CONFIG ($pass)\n"; + system("cp $output_config $tmpdir/bad_config.tmp.$pass"); + $pass++; + # Return 4 for bad config + return 4; + } +} + +sub config_bisect { + my ($i) = @_; + + my $good_config; + my $bad_config; + + my $type = $config_bisect_type; + my $ret; + + $bad_config = $config_bisect; + + if (defined($config_bisect_good)) { + $good_config = $config_bisect_good; + } elsif (defined($minconfig)) { + $good_config = $minconfig; + } else { + doprint "No config specified, checking if defconfig works"; + $ret = run_bisect_test $type, "defconfig"; + if (!$ret) { + fail "Have no good config to compare with, please set CONFIG_BISECT_GOOD"; + return 1; + } + $good_config = $output_config; + } + + if (!defined($config_bisect_exec)) { + # First check the location that ktest.pl ran + my @locations = ( + "$pwd/config-bisect.pl", + "$dirname/config-bisect.pl", + "$builddir/tools/testing/ktest/config-bisect.pl", + undef ); + foreach my $loc (@locations) { + doprint "loc = $loc\n"; + $config_bisect_exec = $loc; + last if (defined($config_bisect_exec && -x $config_bisect_exec)); + } + if (!defined($config_bisect_exec)) { + fail "Could not find an executable config-bisect.pl\n", + " Set CONFIG_BISECT_EXEC to point to config-bisect.pl"; + return 1; + } + } + + # we don't want min configs to cause issues here. + doprint "Disabling 'MIN_CONFIG' for this test\n"; + undef $minconfig; + + my %good_configs; + my %bad_configs; + my %tmp_configs; + + if (-f "$tmpdir/good_config.tmp" || -f "$tmpdir/bad_config.tmp") { + if (read_yn "Interrupted config-bisect. Continue (n - will start new)?") { + if (-f "$tmpdir/good_config.tmp") { + $good_config = "$tmpdir/good_config.tmp"; + } else { + $good_config = "$tmpdir/good_config"; + } + if (-f "$tmpdir/bad_config.tmp") { + $bad_config = "$tmpdir/bad_config.tmp"; + } else { + $bad_config = "$tmpdir/bad_config"; + } + } + } + doprint "Run good configs through make oldconfig\n"; + assign_configs \%tmp_configs, $good_config; + create_config "$good_config", \%tmp_configs; + $good_config = "$tmpdir/good_config"; + system("cp $output_config $good_config") == 0 or dodie "cp good config"; + + doprint "Run bad configs through make oldconfig\n"; + assign_configs \%tmp_configs, $bad_config; + create_config "$bad_config", \%tmp_configs; + $bad_config = "$tmpdir/bad_config"; + system("cp $output_config $bad_config") == 0 or dodie "cp bad config"; + + if (defined($config_bisect_check) && $config_bisect_check ne "0") { + if ($config_bisect_check ne "good") { + doprint "Testing bad config\n"; + + $ret = run_bisect_test $type, "useconfig:$bad_config"; + if ($ret) { + fail "Bad config succeeded when expected to fail!"; + return 0; + } + } + if ($config_bisect_check ne "bad") { + doprint "Testing good config\n"; + + $ret = run_bisect_test $type, "useconfig:$good_config"; + if (!$ret) { + fail "Good config failed when expected to succeed!"; + return 0; + } + } + } + + my $last_run = ""; + + do { + $ret = run_config_bisect $good_config, $bad_config, $last_run; + if ($ret == 3) { + $last_run = "good"; + } elsif ($ret == 4) { + $last_run = "bad"; + } + print_times; + } while ($ret == 3 || $ret == 4); + + if ($ret == 2) { + config_bisect_end "$good_config.tmp", "$bad_config.tmp"; + } + + return $ret if ($ret < 0); + + success $i; +} + +sub patchcheck_reboot { + doprint "Reboot and sleep $patchcheck_sleep_time seconds\n"; + reboot_to_good $patchcheck_sleep_time; +} + +sub patchcheck { + my ($i) = @_; + + dodie "PATCHCHECK_START[$i] not defined\n" + if (!defined($patchcheck_start)); + dodie "PATCHCHECK_TYPE[$i] not defined\n" + if (!defined($patchcheck_type)); + + my $start = $patchcheck_start; + + my $cherry = $patchcheck_cherry; + if (!defined($cherry)) { + $cherry = 0; + } + + my $end = "HEAD"; + if (defined($patchcheck_end)) { + $end = $patchcheck_end; + } elsif ($cherry) { + dodie "PATCHCHECK_END must be defined with PATCHCHECK_CHERRY\n"; + } + + # Get the true sha1's since we can use things like HEAD~3 + $start = get_sha1($start); + $end = get_sha1($end); + + my $type = $patchcheck_type; + + # Can't have a test without having a test to run + if ($type eq "test" && !defined($run_test)) { + $type = "boot"; + } + + if ($cherry) { + open (IN, "git cherry -v $start $end|") or + dodie "could not get git list"; + } else { + open (IN, "git log --pretty=oneline $end|") or + dodie "could not get git list"; + } + + my @list; + + while (<IN>) { + chomp; + # git cherry adds a '+' we want to remove + s/^\+ //; + $list[$#list+1] = $_; + last if (/^$start/); + } + close(IN); + + if (!$cherry) { + if ($list[$#list] !~ /^$start/) { + fail "SHA1 $start not found"; + } + + # go backwards in the list + @list = reverse @list; + } + + doprint("Going to test the following commits:\n"); + foreach my $l (@list) { + doprint "$l\n"; + } + + my $save_clean = $noclean; + my %ignored_warnings; + + if (defined($ignore_warnings)) { + foreach my $sha1 (split /\s+/, $ignore_warnings) { + $ignored_warnings{$sha1} = 1; + } + } + + $in_patchcheck = 1; + foreach my $item (@list) { + my $sha1 = $item; + $sha1 =~ s/^([[:xdigit:]]+).*/$1/; + + doprint "\nProcessing commit \"$item\"\n\n"; + + run_command "git checkout $sha1" or + dodie "Failed to checkout $sha1"; + + # only clean on the first and last patch + if ($item eq $list[0] || + $item eq $list[$#list]) { + $noclean = $save_clean; + } else { + $noclean = 1; + } + + if (defined($minconfig)) { + build "useconfig:$minconfig" or return 0; + } else { + # ?? no config to use? + build "oldconfig" or return 0; + } + + # No need to do per patch checking if warnings file exists + if (!defined($warnings_file) && !defined($ignored_warnings{$sha1})) { + check_patch_buildlog $sha1 or return 0; + } + + check_buildlog or return 0; + + next if ($type eq "build"); + + my $failed = 0; + + start_monitor_and_install or $failed = 1; + + if (!$failed && $type ne "boot"){ + do_run_test or $failed = 1; + } + end_monitor; + if ($failed) { + print_times; + return 0; + } + patchcheck_reboot; + print_times; + } + $in_patchcheck = 0; + success $i; + + return 1; +} + +sub add_dep { + # $config depends on $dep + my ($config, $dep) = @_; + + if (defined($depends{$config})) { + $depends{$config} .= " " . $dep; + } else { + $depends{$config} = $dep; + } + + # record the number of configs depending on $dep + if (defined $depcount{$dep}) { + $depcount{$dep}++; + } else { + $depcount{$dep} = 1; + } +} + +# taken from streamline_config.pl +sub read_kconfig { + my ($kconfig) = @_; + + my $state = "NONE"; + my $config; + my @kconfigs; + + my $cont = 0; + my $line; + + if (! -f $kconfig) { + doprint "file $kconfig does not exist, skipping\n"; + return; + } + + open(KIN, "$kconfig") + or dodie "Can't open $kconfig"; + while (<KIN>) { + chomp; + + # Make sure that lines ending with \ continue + if ($cont) { + $_ = $line . " " . $_; + } + + if (s/\\$//) { + $cont = 1; + $line = $_; + next; + } + + $cont = 0; + + # collect any Kconfig sources + if (/^source\s*"(.*)"/) { + $kconfigs[$#kconfigs+1] = $1; + } + + # configs found + if (/^\s*(menu)?config\s+(\S+)\s*$/) { + $state = "NEW"; + $config = $2; + + for (my $i = 0; $i < $iflevel; $i++) { + add_dep $config, $ifdeps[$i]; + } + + # collect the depends for the config + } elsif ($state eq "NEW" && /^\s*depends\s+on\s+(.*)$/) { + + add_dep $config, $1; + + # Get the configs that select this config + } elsif ($state eq "NEW" && /^\s*select\s+(\S+)/) { + + # selected by depends on config + add_dep $1, $config; + + # Check for if statements + } elsif (/^if\s+(.*\S)\s*$/) { + my $deps = $1; + # remove beginning and ending non text + $deps =~ s/^[^a-zA-Z0-9_]*//; + $deps =~ s/[^a-zA-Z0-9_]*$//; + + my @deps = split /[^a-zA-Z0-9_]+/, $deps; + + $ifdeps[$iflevel++] = join ':', @deps; + + } elsif (/^endif/) { + + $iflevel-- if ($iflevel); + + # stop on "help" + } elsif (/^\s*help\s*$/) { + $state = "NONE"; + } + } + close(KIN); + + # read in any configs that were found. + foreach $kconfig (@kconfigs) { + if (!defined($read_kconfigs{$kconfig})) { + $read_kconfigs{$kconfig} = 1; + read_kconfig("$builddir/$kconfig"); + } + } +} + +sub read_depends { + # find out which arch this is by the kconfig file + open (IN, $output_config) or + dodie "Failed to read $output_config"; + my $arch; + while (<IN>) { + if (m,Linux/(\S+)\s+\S+\s+Kernel Configuration,) { + $arch = $1; + last; + } + } + close IN; + + if (!defined($arch)) { + doprint "Could not find arch from config file\n"; + doprint "no dependencies used\n"; + return; + } + + # arch is really the subarch, we need to know + # what directory to look at. + if ($arch eq "i386" || $arch eq "x86_64") { + $arch = "x86"; + } + + my $kconfig = "$builddir/arch/$arch/Kconfig"; + + if (! -f $kconfig && $arch =~ /\d$/) { + my $orig = $arch; + # some subarchs have numbers, truncate them + $arch =~ s/\d*$//; + $kconfig = "$builddir/arch/$arch/Kconfig"; + if (! -f $kconfig) { + doprint "No idea what arch dir $orig is for\n"; + doprint "no dependencies used\n"; + return; + } + } + + read_kconfig($kconfig); +} + +sub make_new_config { + my @configs = @_; + + open (OUT, ">$output_config") + or dodie "Failed to write $output_config"; + + foreach my $config (@configs) { + print OUT "$config\n"; + } + close OUT; +} + +sub chomp_config { + my ($config) = @_; + + $config =~ s/CONFIG_//; + + return $config; +} + +sub get_depends { + my ($dep) = @_; + + my $kconfig = chomp_config $dep; + + $dep = $depends{"$kconfig"}; + + # the dep string we have saves the dependencies as they + # were found, including expressions like ! && ||. We + # want to split this out into just an array of configs. + + my $valid = "A-Za-z_0-9"; + + my @configs; + + while ($dep =~ /[$valid]/) { + if ($dep =~ /^[^$valid]*([$valid]+)/) { + my $conf = "CONFIG_" . $1; + + $configs[$#configs + 1] = $conf; + + $dep =~ s/^[^$valid]*[$valid]+//; + } else { + dodie "this should never happen"; + } + } + + return @configs; +} + +sub test_this_config { + my ($config) = @_; + + my $found; + + # if we already processed this config, skip it + if (defined($processed_configs{$config})) { + return undef; + } + $processed_configs{$config} = 1; + + # if this config failed during this round, skip it + if (defined($nochange_config{$config})) { + return undef; + } + + my $kconfig = chomp_config $config; + + # Test dependencies first + if (defined($depends{"$kconfig"})) { + my @parents = get_depends $config; + foreach my $parent (@parents) { + # if the parent is in the min config, check it first + next if (!defined($min_configs{$parent})); + $found = test_this_config($parent); + if (defined($found)) { + return $found; + } + } + } + + # Remove this config from the list of configs + # do a make olddefconfig and then read the resulting + # .config to make sure it is missing the config that + # we had before + my %configs = %min_configs; + $configs{$config} = "# $config is not set"; + make_new_config ((values %configs), (values %keep_configs)); + make_oldconfig; + delete $configs{$config}; + undef %configs; + assign_configs \%configs, $output_config; + + if (!defined($configs{$config}) || $configs{$config} =~ /^#/) { + return $config; + } + + doprint "disabling config $config did not change .config\n"; + + $nochange_config{$config} = 1; + + return undef; +} + +sub make_min_config { + my ($i) = @_; + + my $type = $minconfig_type; + if ($type ne "boot" && $type ne "test") { + fail "Invalid MIN_CONFIG_TYPE '$minconfig_type'\n" . + " make_min_config works only with 'boot' and 'test'\n" and return; + } + + if (!defined($output_minconfig)) { + fail "OUTPUT_MIN_CONFIG not defined" and return; + } + + # If output_minconfig exists, and the start_minconfig + # came from min_config, than ask if we should use + # that instead. + if (-f $output_minconfig && !$start_minconfig_defined) { + print "$output_minconfig exists\n"; + if (!defined($use_output_minconfig)) { + if (read_yn " Use it as minconfig?") { + $start_minconfig = $output_minconfig; + } + } elsif ($use_output_minconfig > 0) { + doprint "Using $output_minconfig as MIN_CONFIG\n"; + $start_minconfig = $output_minconfig; + } else { + doprint "Set to still use MIN_CONFIG as starting point\n"; + } + } + + if (!defined($start_minconfig)) { + fail "START_MIN_CONFIG or MIN_CONFIG not defined" and return; + } + + my $temp_config = "$tmpdir/temp_config"; + + # First things first. We build an allnoconfig to find + # out what the defaults are that we can't touch. + # Some are selections, but we really can't handle selections. + + my $save_minconfig = $minconfig; + undef $minconfig; + + run_command "$make allnoconfig" or return 0; + + read_depends; + + process_config_ignore $output_config; + + undef %save_configs; + undef %min_configs; + + if (defined($ignore_config)) { + # make sure the file exists + `touch $ignore_config`; + assign_configs \%save_configs, $ignore_config; + } + + %keep_configs = %save_configs; + + doprint "Load initial configs from $start_minconfig\n"; + + # Look at the current min configs, and save off all the + # ones that were set via the allnoconfig + assign_configs \%min_configs, $start_minconfig; + + my @config_keys = keys %min_configs; + + # All configs need a depcount + foreach my $config (@config_keys) { + my $kconfig = chomp_config $config; + if (!defined $depcount{$kconfig}) { + $depcount{$kconfig} = 0; + } + } + + # Remove anything that was set by the make allnoconfig + # we shouldn't need them as they get set for us anyway. + foreach my $config (@config_keys) { + # Remove anything in the ignore_config + if (defined($keep_configs{$config})) { + my $file = $ignore_config; + $file =~ s,.*/(.*?)$,$1,; + doprint "$config set by $file ... ignored\n"; + delete $min_configs{$config}; + next; + } + # But make sure the settings are the same. If a min config + # sets a selection, we do not want to get rid of it if + # it is not the same as what we have. Just move it into + # the keep configs. + if (defined($config_ignore{$config})) { + if ($config_ignore{$config} ne $min_configs{$config}) { + doprint "$config is in allnoconfig as '$config_ignore{$config}'"; + doprint " but it is '$min_configs{$config}' in minconfig .. keeping\n"; + $keep_configs{$config} = $min_configs{$config}; + } else { + doprint "$config set by allnoconfig ... ignored\n"; + } + delete $min_configs{$config}; + } + } + + my $done = 0; + my $take_two = 0; + + while (!$done) { + my $config; + my $found; + + # Now disable each config one by one and do a make oldconfig + # till we find a config that changes our list. + + my @test_configs = keys %min_configs; + + # Sort keys by who is most dependent on + @test_configs = sort { $depcount{chomp_config($b)} <=> $depcount{chomp_config($a)} } + @test_configs ; + + # Put configs that did not modify the config at the end. + my $reset = 1; + for (my $i = 0; $i < $#test_configs; $i++) { + if (!defined($nochange_config{$test_configs[0]})) { + $reset = 0; + last; + } + # This config didn't change the .config last time. + # Place it at the end + my $config = shift @test_configs; + push @test_configs, $config; + } + + # if every test config has failed to modify the .config file + # in the past, then reset and start over. + if ($reset) { + undef %nochange_config; + } + + undef %processed_configs; + + foreach my $config (@test_configs) { + + $found = test_this_config $config; + + last if (defined($found)); + + # oh well, try another config + } + + if (!defined($found)) { + # we could have failed due to the nochange_config hash + # reset and try again + if (!$take_two) { + undef %nochange_config; + $take_two = 1; + next; + } + doprint "No more configs found that we can disable\n"; + $done = 1; + last; + } + $take_two = 0; + + $config = $found; + + doprint "Test with $config disabled\n"; + + # set in_bisect to keep build and monitor from dieing + $in_bisect = 1; + + my $failed = 0; + build "oldconfig" or $failed = 1; + if (!$failed) { + start_monitor_and_install or $failed = 1; + + if ($type eq "test" && !$failed) { + do_run_test or $failed = 1; + } + + end_monitor; + } + + $in_bisect = 0; + + if ($failed) { + doprint "$min_configs{$config} is needed to boot the box... keeping\n"; + # this config is needed, add it to the ignore list. + $keep_configs{$config} = $min_configs{$config}; + $save_configs{$config} = $min_configs{$config}; + delete $min_configs{$config}; + + # update new ignore configs + if (defined($ignore_config)) { + open (OUT, ">$temp_config") or + dodie "Can't write to $temp_config"; + foreach my $config (keys %save_configs) { + print OUT "$save_configs{$config}\n"; + } + close OUT; + run_command "mv $temp_config $ignore_config" or + dodie "failed to copy update to $ignore_config"; + } + + } else { + # We booted without this config, remove it from the minconfigs. + doprint "$config is not needed, disabling\n"; + + delete $min_configs{$config}; + + # Also disable anything that is not enabled in this config + my %configs; + assign_configs \%configs, $output_config; + my @config_keys = keys %min_configs; + foreach my $config (@config_keys) { + if (!defined($configs{$config})) { + doprint "$config is not set, disabling\n"; + delete $min_configs{$config}; + } + } + + # Save off all the current mandatory configs + open (OUT, ">$temp_config") or + dodie "Can't write to $temp_config"; + foreach my $config (keys %keep_configs) { + print OUT "$keep_configs{$config}\n"; + } + foreach my $config (keys %min_configs) { + print OUT "$min_configs{$config}\n"; + } + close OUT; + + run_command "mv $temp_config $output_minconfig" or + dodie "failed to copy update to $output_minconfig"; + } + + doprint "Reboot and wait $sleep_time seconds\n"; + reboot_to_good $sleep_time; + } + + success $i; + return 1; +} + +sub make_warnings_file { + my ($i) = @_; + + if (!defined($warnings_file)) { + dodie "Must define WARNINGS_FILE for make_warnings_file test"; + } + + if ($build_type eq "nobuild") { + dodie "BUILD_TYPE can not be 'nobuild' for make_warnings_file test"; + } + + build $build_type or dodie "Failed to build"; + + open(OUT, ">$warnings_file") or dodie "Can't create $warnings_file"; + + open(IN, $buildlog) or dodie "Can't open $buildlog"; + while (<IN>) { + # Some compilers use UTF-8 extended for quotes + # for distcc heterogeneous systems, this causes issues + s/$utf8_quote/'/g; + + if (/$check_build_re/) { + print OUT; + } + } + close(IN); + + close(OUT); + + success $i; +} + +sub option_defined { + my ($option) = @_; + + if (defined($opt{$option}) && $opt{$option} !~ /^\s*$/) { + return 1; + } + + return 0; +} + +sub __set_test_option { + my ($name, $i) = @_; + + my $option = "$name\[$i\]"; + + if (option_defined($option)) { + return $opt{$option}; + } + + foreach my $test (keys %repeat_tests) { + if ($i >= $test && + $i < $test + $repeat_tests{$test}) { + $option = "$name\[$test\]"; + if (option_defined($option)) { + return $opt{$option}; + } + } + } + + if (option_defined($name)) { + return $opt{$name}; + } + + return undef; +} + +sub set_test_option { + my ($name, $i) = @_; + + my $option = __set_test_option($name, $i); + return $option if (!defined($option)); + + return eval_option($name, $option, $i); +} + +sub find_mailer { + my ($mailer) = @_; + + my @paths = split /:/, $ENV{PATH}; + + # sendmail is usually in /usr/sbin + $paths[$#paths + 1] = "/usr/sbin"; + + foreach my $path (@paths) { + if (-x "$path/$mailer") { + return $path; + } + } + + return undef; +} + +sub do_send_mail { + my ($subject, $message, $file) = @_; + + if (!defined($mail_path)) { + # find the mailer + $mail_path = find_mailer $mailer; + if (!defined($mail_path)) { + die "\nCan not find $mailer in PATH\n"; + } + } + + my $header_file = "$tmpdir/header"; + open (HEAD, ">$header_file") or die "Can not create $header_file\n"; + print HEAD "To: $mailto\n"; + print HEAD "Subject: $subject\n\n"; + print HEAD "$message\n"; + close HEAD; + + if (!defined($mail_command)) { + if ($mailer eq "mail" || $mailer eq "mailx") { + $mail_command = "cat \$HEADER_FILE \$BODY_FILE | \$MAIL_PATH/\$MAILER -s \'\$SUBJECT\' \$MAILTO"; + } elsif ($mailer eq "sendmail" ) { + $mail_command = "cat \$HEADER_FILE \$BODY_FILE | \$MAIL_PATH/\$MAILER -t \$MAILTO"; + } else { + die "\nYour mailer: $mailer is not supported.\n"; + } + } + + if (defined($file)) { + $mail_command =~ s/\$BODY_FILE/$file/g; + } else { + $mail_command =~ s/\$BODY_FILE//g; + } + + $mail_command =~ s/\$HEADER_FILE/$header_file/g; + $mail_command =~ s/\$MAILER/$mailer/g; + $mail_command =~ s/\$MAIL_PATH/$mail_path/g; + $mail_command =~ s/\$MAILTO/$mailto/g; + $mail_command =~ s/\$SUBJECT/$subject/g; + $mail_command =~ s/\$MESSAGE/$message/g; + + my $ret = run_command $mail_command; + if (!$ret && defined($file)) { + # try again without the file + $message .= "\n\n*** FAILED TO SEND LOG ***\n\n"; + do_send_email($subject, $message); + } +} + +sub send_email { + if (defined($mailto)) { + if (!defined($mailer)) { + doprint "No email sent: email or mailer not specified in config.\n"; + return; + } + do_send_mail @_; + } +} + +sub cancel_test { + if ($monitor_cnt) { + end_monitor; + } + if ($email_when_canceled) { + my $name = get_test_name; + send_email("KTEST: Your [$name] test was cancelled", + "Your test started at $script_start_time was cancelled: sig int"); + } + die "\nCaught Sig Int, test interrupted: $!\n" +} + +$#ARGV < 1 or die "ktest.pl version: $VERSION\n usage: ktest.pl [config-file]\n"; + +if ($#ARGV == 0) { + $ktest_config = $ARGV[0]; + if (! -f $ktest_config) { + print "$ktest_config does not exist.\n"; + if (!read_yn "Create it?") { + exit 0; + } + } +} + +if (! -f $ktest_config) { + $newconfig = 1; + get_test_case; + open(OUT, ">$ktest_config") or die "Can not create $ktest_config"; + print OUT << "EOF" +# Generated by ktest.pl +# + +# PWD is a ktest.pl variable that will result in the process working +# directory that ktest.pl is executed in. + +# THIS_DIR is automatically assigned the PWD of the path that generated +# the config file. It is best to use this variable when assigning other +# directory paths within this directory. This allows you to easily +# move the test cases to other locations or to other machines. +# +THIS_DIR := $variable{"PWD"} + +# Define each test with TEST_START +# The config options below it will override the defaults +TEST_START +TEST_TYPE = $default{"TEST_TYPE"} + +DEFAULTS +EOF +; + close(OUT); +} +read_config $ktest_config; + +if (defined($opt{"LOG_FILE"})) { + $opt{"LOG_FILE"} = eval_option("LOG_FILE", $opt{"LOG_FILE"}, -1); +} + +# Append any configs entered in manually to the config file. +my @new_configs = keys %entered_configs; +if ($#new_configs >= 0) { + print "\nAppending entered in configs to $ktest_config\n"; + open(OUT, ">>$ktest_config") or die "Can not append to $ktest_config"; + foreach my $config (@new_configs) { + print OUT "$config = $entered_configs{$config}\n"; + $opt{$config} = process_variables($entered_configs{$config}); + } +} + +if (defined($opt{"LOG_FILE"})) { + if ($opt{"CLEAR_LOG"}) { + unlink $opt{"LOG_FILE"}; + } + open(LOG, ">> $opt{LOG_FILE}") or die "Can't write to $opt{LOG_FILE}"; + LOG->autoflush(1); +} + +doprint "\n\nSTARTING AUTOMATED TESTS\n\n"; + +for (my $i = 0, my $repeat = 1; $i <= $opt{"NUM_TESTS"}; $i += $repeat) { + + if (!$i) { + doprint "DEFAULT OPTIONS:\n"; + } else { + doprint "\nTEST $i OPTIONS"; + if (defined($repeat_tests{$i})) { + $repeat = $repeat_tests{$i}; + doprint " ITERATE $repeat"; + } + doprint "\n"; + } + + foreach my $option (sort keys %opt) { + if ($option =~ /\[(\d+)\]$/) { + next if ($i != $1); + } else { + next if ($i); + } + + doprint "$option = $opt{$option}\n"; + } +} + +$SIG{INT} = qw(cancel_test); + +# First we need to do is the builds +for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { + + # Do not reboot on failing test options + $no_reboot = 1; + $reboot_success = 0; + + $have_version = 0; + + $iteration = $i; + + $build_time = 0; + $install_time = 0; + $reboot_time = 0; + $test_time = 0; + + undef %force_config; + + my $makecmd = set_test_option("MAKE_CMD", $i); + + $outputdir = set_test_option("OUTPUT_DIR", $i); + $builddir = set_test_option("BUILD_DIR", $i); + + chdir $builddir || dodie "can't change directory to $builddir"; + + if (!-d $outputdir) { + mkpath($outputdir) or + dodie "can't create $outputdir"; + } + + $make = "$makecmd O=$outputdir"; + + # Load all the options into their mapped variable names + foreach my $opt (keys %option_map) { + ${$option_map{$opt}} = set_test_option($opt, $i); + } + + $start_minconfig_defined = 1; + + # The first test may override the PRE_KTEST option + if ($i == 1) { + if (defined($pre_ktest)) { + doprint "\n"; + run_command $pre_ktest; + } + if ($email_when_started) { + my $name = get_test_name; + send_email("KTEST: Your [$name] test was started", + "Your test was started on $script_start_time"); + } + } + + # Any test can override the POST_KTEST option + # The last test takes precedence. + if (defined($post_ktest)) { + $final_post_ktest = $post_ktest; + } + + if (!defined($start_minconfig)) { + $start_minconfig_defined = 0; + $start_minconfig = $minconfig; + } + + if (!-d $tmpdir) { + mkpath($tmpdir) or + dodie "can't create $tmpdir"; + } + + $ENV{"SSH_USER"} = $ssh_user; + $ENV{"MACHINE"} = $machine; + + $buildlog = "$tmpdir/buildlog-$machine"; + $testlog = "$tmpdir/testlog-$machine"; + $dmesg = "$tmpdir/dmesg-$machine"; + $output_config = "$outputdir/.config"; + + if (!$buildonly) { + $target = "$ssh_user\@$machine"; + if (($reboot_type eq "grub") or ($reboot_type eq "grub2bls")) { + dodie "GRUB_MENU not defined" if (!defined($grub_menu)); + } elsif ($reboot_type eq "grub2") { + dodie "GRUB_MENU not defined" if (!defined($grub_menu)); + dodie "GRUB_FILE not defined" if (!defined($grub_file)); + } elsif ($reboot_type eq "syslinux") { + dodie "SYSLINUX_LABEL not defined" if (!defined($syslinux_label)); + } + } + + my $run_type = $build_type; + if ($test_type eq "patchcheck") { + $run_type = $patchcheck_type; + } elsif ($test_type eq "bisect") { + $run_type = $bisect_type; + } elsif ($test_type eq "config_bisect") { + $run_type = $config_bisect_type; + } elsif ($test_type eq "make_min_config") { + $run_type = ""; + } elsif ($test_type eq "make_warnings_file") { + $run_type = ""; + } + + # mistake in config file? + if (!defined($run_type)) { + $run_type = "ERROR"; + } + + my $installme = ""; + $installme = " no_install" if ($no_install); + + my $name = ""; + + if (defined($test_name)) { + $name = " ($test_name)"; + } + + doprint "\n\n"; + + if (defined($opt{"LOG_FILE"})) { + $test_log_start = tell(LOG); + } + + doprint "RUNNING TEST $i of $opt{NUM_TESTS}$name with option $test_type $run_type$installme\n\n"; + + if (defined($pre_test)) { + my $ret = run_command $pre_test; + if (!$ret && defined($pre_test_die) && + $pre_test_die) { + dodie "failed to pre_test\n"; + } + } + + unlink $dmesg; + unlink $buildlog; + unlink $testlog; + + if (defined($addconfig)) { + my $min = $minconfig; + if (!defined($minconfig)) { + $min = ""; + } + run_command "cat $addconfig $min > $tmpdir/add_config" or + dodie "Failed to create temp config"; + $minconfig = "$tmpdir/add_config"; + } + + if (defined($checkout)) { + run_command "git checkout $checkout" or + dodie "failed to checkout $checkout"; + } + + $no_reboot = 0; + + # A test may opt to not reboot the box + if ($reboot_on_success) { + $reboot_success = 1; + } + + if ($test_type eq "bisect") { + bisect $i; + next; + } elsif ($test_type eq "config_bisect") { + config_bisect $i; + next; + } elsif ($test_type eq "patchcheck") { + patchcheck $i; + next; + } elsif ($test_type eq "make_min_config") { + make_min_config $i; + next; + } elsif ($test_type eq "make_warnings_file") { + $no_reboot = 1; + make_warnings_file $i; + next; + } + + if ($build_type ne "nobuild") { + build $build_type or next; + check_buildlog or next; + } + + if ($test_type eq "install") { + get_version; + install; + success $i; + next; + } + + if ($test_type ne "build") { + my $failed = 0; + start_monitor_and_install or $failed = 1; + + if (!$failed && $test_type ne "boot" && defined($run_test)) { + do_run_test or $failed = 1; + } + end_monitor; + if ($failed) { + print_times; + next; + } + } + + print_times; + + success $i; +} + +if (defined($final_post_ktest)) { + + my $cp_final_post_ktest = eval_kernel_version $final_post_ktest; + run_command $cp_final_post_ktest; +} + +if ($opt{"POWEROFF_ON_SUCCESS"}) { + halt; +} elsif ($opt{"REBOOT_ON_SUCCESS"} && !do_not_reboot && $reboot_success) { + reboot_to_good; +} elsif (defined($switch_to_good)) { + # still need to get to the good kernel + run_command $switch_to_good; +} + +doprint "\n $successes of $opt{NUM_TESTS} tests were successful\n\n"; + +if ($email_when_finished) { + send_email("KTEST: Your test has finished!", + "$successes of $opt{NUM_TESTS} tests started at $script_start_time were successful!"); +} + +if (defined($opt{"LOG_FILE"})) { + print "\n See $opt{LOG_FILE} for the record of results.\n\n"; + close LOG; +} + +exit 0; + +## +# The following are here to standardize tabs/spaces/etc across the most likely editors +### + +# Local Variables: +# mode: perl +# End: +# vim: softtabstop=4 |