From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001
From: Daniel Baumann <daniel.baumann@progress-linux.org>
Date: Sun, 7 Apr 2024 20:49:45 +0200
Subject: Adding upstream version 6.1.76.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
---
 .../bindings/bus/qcom,ssc-block-bus.yaml           | 144 +++++++++++++++++++++
 1 file changed, 144 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml

(limited to 'Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml')

diff --git a/Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml b/Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml
new file mode 100644
index 000000000..8e9e6ff35
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/qcom,ssc-block-bus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: The AHB Bus Providing a Global View of the SSC Block on (some) qcom SoCs
+
+maintainers:
+  - Michael Srba <Michael.Srba@seznam.cz>
+
+description: |
+  This binding describes the dependencies (clocks, resets, power domains) which
+  need to be turned on in a sequence before communication over the AHB bus
+  becomes possible.
+
+  Additionally, the reg property is used to pass to the driver the location of
+  two sadly undocumented registers which need to be poked as part of the sequence.
+
+  The SSC (Snapdragon Sensor Core) block contains a gpio controller, i2c/spi/uart
+  controllers, a hexagon core, and a clock controller which provides clocks for
+  the above.
+
+properties:
+  compatible:
+    items:
+      - const: qcom,msm8998-ssc-block-bus
+      - const: qcom,ssc-block-bus
+
+  reg:
+    items:
+      - description: SSCAON_CONFIG0 registers
+      - description: SSCAON_CONFIG1 registers
+
+  reg-names:
+    items:
+      - const: mpm_sscaon_config0
+      - const: mpm_sscaon_config1
+
+  '#address-cells':
+    enum: [ 1, 2 ]
+
+  '#size-cells':
+    enum: [ 1, 2 ]
+
+  ranges: true
+
+  clocks:
+    maxItems: 6
+
+  clock-names:
+    items:
+      - const: xo
+      - const: aggre2
+      - const: gcc_im_sleep
+      - const: aggre2_north
+      - const: ssc_xo
+      - const: ssc_ahbs
+
+  power-domains:
+    items:
+      - description: CX power domain
+      - description: MX power domain
+
+  power-domain-names:
+    items:
+      - const: ssc_cx
+      - const: ssc_mx
+
+  resets:
+    items:
+      - description: Main reset
+      - description:
+          SSC Branch Control Register reset (associated with the ssc_xo and
+          ssc_ahbs clocks)
+
+  reset-names:
+    items:
+      - const: ssc_reset
+      - const: ssc_bcr
+
+  qcom,halt-regs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: describes how to locate the ssc AXI halt register
+    items:
+      - items:
+          - description: Phandle reference to a syscon representing TCSR
+          - description: offset for the ssc AXI halt register
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - '#address-cells'
+  - '#size-cells'
+  - ranges
+  - clocks
+  - clock-names
+  - power-domains
+  - power-domain-names
+  - resets
+  - reset-names
+  - qcom,halt-regs
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8998.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        // devices under this node are physically located in the SSC block, connected to an ssc-internal bus;
+        ssc_ahb_slave: bus@10ac008 {
+            #address-cells = <1>;
+            #size-cells = <1>;
+            ranges;
+
+            compatible = "qcom,msm8998-ssc-block-bus", "qcom,ssc-block-bus";
+            reg = <0x10ac008 0x4>, <0x10ac010 0x4>;
+            reg-names = "mpm_sscaon_config0", "mpm_sscaon_config1";
+
+            clocks = <&xo>,
+                     <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
+                     <&gcc GCC_IM_SLEEP>,
+                     <&gcc AGGRE2_SNOC_NORTH_AXI>,
+                     <&gcc SSC_XO>,
+                     <&gcc SSC_CNOC_AHBS_CLK>;
+            clock-names = "xo", "aggre2", "gcc_im_sleep", "aggre2_north", "ssc_xo", "ssc_ahbs";
+
+            resets = <&gcc GCC_SSC_RESET>, <&gcc GCC_SSC_BCR>;
+            reset-names = "ssc_reset", "ssc_bcr";
+
+            power-domains = <&rpmpd MSM8998_SSCCX>, <&rpmpd MSM8998_SSCMX>;
+            power-domain-names = "ssc_cx", "ssc_mx";
+
+            qcom,halt-regs = <&tcsr_mutex_regs 0x26000>;
+        };
+    };
-- 
cgit v1.2.3