From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- .../devicetree/bindings/fsi/fsi-master-aspeed.txt | 36 ++++++++++++++++++++++ 1 file changed, 36 insertions(+) create mode 100644 Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt (limited to 'Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt') diff --git a/Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt b/Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt new file mode 100644 index 000000000..9853fefff --- /dev/null +++ b/Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt @@ -0,0 +1,36 @@ +Device-tree bindings for AST2600 FSI master +------------------------------------------- + +The AST2600 contains two identical FSI masters. They share a clock and have a +separate interrupt line and output pins. + +Required properties: + - compatible: "aspeed,ast2600-fsi-master" + - reg: base address and length + - clocks: phandle and clock number + - interrupts: platform dependent interrupt description + - pinctrl-0: phandle to pinctrl node + - pinctrl-names: pinctrl state + +Optional properties: + - cfam-reset-gpios: GPIO for CFAM reset + + - fsi-routing-gpios: GPIO for setting the FSI mux (internal or cabled) + - fsi-mux-gpios: GPIO for detecting the desired FSI mux state + + +Examples: + + fsi-master { + compatible = "aspeed,ast2600-fsi-master", "fsi-master"; + reg = <0x1e79b000 0x94>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fsi1_default>; + clocks = <&syscon ASPEED_CLK_GATE_FSICLK>; + + fsi-routing-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>; + fsi-mux-gpios = <&gpio0 ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>; + + cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_LOW>; + }; -- cgit v1.2.3