From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- .../devicetree/bindings/gnss/brcm,bcm4751.yaml | 69 ++++++++++++++++++++ .../devicetree/bindings/gnss/gnss-common.yaml | 55 ++++++++++++++++ .../devicetree/bindings/gnss/mediatek.yaml | 59 +++++++++++++++++ .../devicetree/bindings/gnss/sirfstar.yaml | 76 ++++++++++++++++++++++ .../devicetree/bindings/gnss/u-blox,neo-6m.yaml | 58 +++++++++++++++++ 5 files changed, 317 insertions(+) create mode 100644 Documentation/devicetree/bindings/gnss/brcm,bcm4751.yaml create mode 100644 Documentation/devicetree/bindings/gnss/gnss-common.yaml create mode 100644 Documentation/devicetree/bindings/gnss/mediatek.yaml create mode 100644 Documentation/devicetree/bindings/gnss/sirfstar.yaml create mode 100644 Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml (limited to 'Documentation/devicetree/bindings/gnss') diff --git a/Documentation/devicetree/bindings/gnss/brcm,bcm4751.yaml b/Documentation/devicetree/bindings/gnss/brcm,bcm4751.yaml new file mode 100644 index 000000000..c21549e0f --- /dev/null +++ b/Documentation/devicetree/bindings/gnss/brcm,bcm4751.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gnss/brcm,bcm4751.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM4751 family GNSS Receiver + +maintainers: + - Johan Hovold + - Linus Walleij + +description: + Broadcom GPS chips can be used over the UART or I2C bus. The UART + bus requires CTS/RTS support. The number of the capsule is more + elaborate than the compatibles BCM4751 may be printed + BCM4751IFBG for example. + +allOf: + - $ref: gnss-common.yaml# + +properties: + compatible: + enum: + - brcm,bcm4751 + - brcm,bcm4752 + - brcm,bcm4753 + + reg: + description: + The I2C Address, not required on UART buses. + + vdd-auxin-supply: + description: + Main voltage supply, pin name VDD_AUXIN, typically connected + directly to a battery such as LiIon 3.8V battery or a 2.6V supply. + + vddio-supply: + description: + IO voltage supply, pin name VDDIO, typically 1.8V + + reset-gpios: + maxItems: 1 + description: An optional active low reset line, should be flagged with + GPIO_ACTIVE_LOW. + + enable-gpios: + description: Enable GPIO line, connected to pins named REGPU or NSTANDBY. + If the line is active low such as NSTANDBY, it should be tagged + GPIO_ACTIVE_LOW. + +required: + - compatible + - enable-gpios + +unevaluatedProperties: false + +examples: + - | + #include + serial { + gnss { + compatible = "brcm,bcm4751"; + vdd-auxin-supply = <&vbat>; + reset-gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; + enable-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; + current-speed = <38400>; + }; + }; diff --git a/Documentation/devicetree/bindings/gnss/gnss-common.yaml b/Documentation/devicetree/bindings/gnss/gnss-common.yaml new file mode 100644 index 000000000..963b926e3 --- /dev/null +++ b/Documentation/devicetree/bindings/gnss/gnss-common.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gnss/gnss-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common Properties for Global Navigation Satellite Systems (GNSS) + receiver devices + +maintainers: + - Johan Hovold + +description: | + This document defines device tree properties common to Global Navigation + Satellite System receivers. + +properties: + $nodename: + pattern: "^gnss(@.*)?$" + + lna-supply: + description: A separate regulator supplying power for the Low Noise + Amplifier (LNA). This is an amplifier connected between the GNSS + device and the receiver antenna. + + enable-gpios: + description: A GPIO line that will enable the GNSS receiver when + asserted. If this line is active low, the GPIO phandle should + consequently be tagged with the GPIO_ACTIVE_LOW flag so the operating + system can rely on asserting the line to enable the GNSS device. + maxItems: 1 + + timepulse-gpios: + description: When a timepulse is provided to the GNSS device using a + GPIO line, this is used. + maxItems: 1 + + current-speed: + description: The baudrate in bits per second of the device as it comes + online, current active speed. + $ref: /schemas/types.yaml#/definitions/uint32 + +additionalProperties: true + +examples: + - | + #include + serial { + gnss { + compatible = "u-blox,neo-8"; + vcc-supply = <&gnss_reg>; + timepulse-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; + current-speed = <4800>; + }; + }; diff --git a/Documentation/devicetree/bindings/gnss/mediatek.yaml b/Documentation/devicetree/bindings/gnss/mediatek.yaml new file mode 100644 index 000000000..c0eb35beb --- /dev/null +++ b/Documentation/devicetree/bindings/gnss/mediatek.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gnss/mediatek.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek GNSS Receiver + +maintainers: + - Johan Hovold + +description: + Mediatek chipsets are used in GNSS-receiver modules produced by several + vendors and can use a UART interface. + +allOf: + - $ref: gnss-common.yaml# + +properties: + compatible: + const: globaltop,pa6h + + vcc-supply: + description: + Main voltage regulator, pin name VCC. + + reset-gpios: + maxItems: 1 + description: An optional reset line, with names such as RESET or NRESET. + If the line is active low it should be flagged with GPIO_ACTIVE_LOW. + + timepulse-gpios: + description: Comes with pin names such as PPS1 or 1PPS. + + gnss-fix-gpios: + maxItems: 1 + description: GPIO used to determine device position fix state, pin names + FIX or 3D_FIX. + + vbackup-supply: + description: + Regulator providing backup voltage, pin names such as VBAT or VBACKUP. + +required: + - compatible + - vcc-supply + +unevaluatedProperties: false + +examples: + - | + #include + serial { + gnss { + compatible = "globaltop,pa6h"; + vcc-supply = <&vcc_3v3>; + reset-gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + }; + }; diff --git a/Documentation/devicetree/bindings/gnss/sirfstar.yaml b/Documentation/devicetree/bindings/gnss/sirfstar.yaml new file mode 100644 index 000000000..0bbe684d8 --- /dev/null +++ b/Documentation/devicetree/bindings/gnss/sirfstar.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gnss/sirfstar.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SiRFstar GNSS Receiver + +maintainers: + - Johan Hovold + +description: + The SiRFstar GNSS receivers have incarnated over the years in different + chips, starting from the SiRFstarIII which was a chip that was introduced in + 2004 and used in a lot of dedicated GPS devices. In 2009 SiRF was acquired + by CSR (Cambridge Silicon Radio) and in 2012 the CSR GPS business was + acquired by Samsung, while some products remained with CSR. In 2014 CSR + was acquired by Qualcomm who still sell some of the SiRF products. + + SiRF chips can be used over UART, I2C or SPI buses. + +allOf: + - $ref: gnss-common.yaml# + +properties: + compatible: + enum: + - csr,gsd4t + - csr,csrg05ta03-icje-r + - fastrax,uc430 + - linx,r4 + - wi2wi,w2sg0004 + - wi2wi,w2sg0008i + - wi2wi,w2sg0084i + + reg: + description: + The I2C Address, SPI chip select address. Not required on UART buses. + + vcc-supply: + description: + Main voltage regulator, pin names such as 3V3_IN, VCC, VDD. + + reset-gpios: + maxItems: 1 + description: An optional active low reset line, should be flagged with + GPIO_ACTIVE_LOW. + + sirf,onoff-gpios: + maxItems: 1 + description: GPIO used to power on and off device, pin name ON_OFF. + + sirf,wakeup-gpios: + maxItems: 1 + description: GPIO used to determine device power state, pin names such + as RFPWRUP, WAKEUP. + +required: + - compatible + - vcc-supply + +unevaluatedProperties: false + +examples: + - | + #include + serial { + gnss { + compatible = "wi2wi,w2sg0084i"; + vcc-supply = <&gnss_vcc_reg>; + reset-gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; + sirf,onoff-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; + sirf,wakeup-gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>; + current-speed = <38400>; + }; + }; diff --git a/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml b/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml new file mode 100644 index 000000000..4835a280b --- /dev/null +++ b/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gnss/u-blox,neo-6m.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: U-blox GNSS Receiver + +allOf: + - $ref: gnss-common.yaml# + +maintainers: + - Johan Hovold + +description: > + The U-blox GNSS receivers can use UART, DDC (I2C), SPI and USB interfaces. + +properties: + compatible: + enum: + - u-blox,neo-6m + - u-blox,neo-8 + - u-blox,neo-m8 + + reg: + description: > + The DDC Slave Address, SPI chip select address, the number of the USB hub + port or the USB host-controller port to which this device is attached, + depending on the bus used. Required for the DDC, SPI or USB busses. + + vcc-supply: + description: > + Main voltage regulator + + u-blox,extint-gpios: + maxItems: 1 + description: > + GPIO connected to the "external interrupt" input pin + + v-bckp-supply: + description: > + Backup voltage regulator + +required: + - compatible + - vcc-supply + +unevaluatedProperties: false + +examples: + - | + serial { + gnss { + compatible = "u-blox,neo-8"; + v-bckp-supply = <&gnss_v_bckp_reg>; + vcc-supply = <&gnss_vcc_reg>; + }; + }; -- cgit v1.2.3