From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- .../bindings/interrupt-controller/arm,gic-v3.yaml | 296 +++++++++++++++++++++ 1 file changed, 296 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml (limited to 'Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml') diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml new file mode 100644 index 000000000..9f7d3e11a --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml @@ -0,0 +1,296 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/arm,gic-v3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Generic Interrupt Controller, version 3 + +maintainers: + - Marc Zyngier + +description: | + AArch64 SMP cores are often associated with a GICv3, providing Private + Peripheral Interrupts (PPI), Shared Peripheral Interrupts (SPI), + Software Generated Interrupts (SGI), and Locality-specific Peripheral + Interrupts (LPI). + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - qcom,msm8996-gic-v3 + - const: arm,gic-v3 + - const: arm,gic-v3 + + interrupt-controller: true + + "#address-cells": + enum: [ 0, 1, 2 ] + "#size-cells": + enum: [ 1, 2 ] + + ranges: true + + "#interrupt-cells": + description: | + Specifies the number of cells needed to encode an interrupt source. + Must be a single cell with a value of at least 3. + If the system requires describing PPI affinity, then the value must + be at least 4. + + The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI + interrupts, 2 for interrupts in the Extended SPI range, 3 for the + Extended PPI range. Other values are reserved for future use. + + The 2nd cell contains the interrupt number for the interrupt type. + SPI interrupts are in the range [0-987]. PPI interrupts are in the + range [0-15]. Extented SPI interrupts are in the range [0-1023]. + Extended PPI interrupts are in the range [0-127]. + + The 3rd cell is the flags, encoded as follows: + bits[3:0] trigger type and level flags. + 1 = edge triggered + 4 = level triggered + + The 4th cell is a phandle to a node describing a set of CPUs this + interrupt is affine to. The interrupt must be a PPI, and the node + pointed must be a subnode of the "ppi-partitions" subnode. For + interrupt types other than PPI or PPIs that are not partitionned, + this cell must be zero. See the "ppi-partitions" node description + below. + + Cells 5 and beyond are reserved for future use and must have a value + of 0 if present. + enum: [ 3, 4 ] + + reg: + description: | + Specifies base physical address(s) and size of the GIC + registers, in the following order: + - GIC Distributor interface (GICD) + - GIC Redistributors (GICR), one range per redistributor region + - GIC CPU interface (GICC) + - GIC Hypervisor interface (GICH) + - GIC Virtual CPU interface (GICV) + + GICC, GICH and GICV are optional, but must be described if the CPUs + support them. Examples of such CPUs are ARM's implementations of the + ARMv8.0 architecture such as Cortex-A32, A34, A35, A53, A57, A72 and + A73 (this list is not exhaustive). + + minItems: 2 + maxItems: 4096 # Should be enough? + + interrupts: + description: + Interrupt source of the VGIC maintenance interrupt. + maxItems: 1 + + redistributor-stride: + description: + If using padding pages, specifies the stride of consecutive + redistributors. Must be a multiple of 64kB. + $ref: /schemas/types.yaml#/definitions/uint64 + multipleOf: 0x10000 + exclusiveMinimum: 0 + + "#redistributor-regions": + description: + The number of independent contiguous regions occupied by the + redistributors. Required if more than one such region is present. + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 4096 + + msi-controller: + description: + Only present if the Message Based Interrupt functionnality is + being exposed by the HW, and the mbi-ranges property present. + + mbi-ranges: + description: + A list of pairs , where "intid" is the first SPI of a range + that can be used an MBI, and "span" the size of that range. Multiple + ranges can be provided. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + minItems: 2 + maxItems: 2 + + mbi-alias: + description: + Address property. Base address of an alias of the GICD region containing + only the {SET,CLR}SPI registers to be used if isolation is required, + and if supported by the HW. + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + minItems: 1 + maxItems: 2 + + ppi-partitions: + type: object + description: + PPI affinity can be expressed as a single "ppi-partitions" node, + containing a set of sub-nodes. + patternProperties: + "^interrupt-partition-[0-9]+$": + type: object + properties: + affinity: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 + description: + Should be a list of phandles to CPU nodes (as described in + Documentation/devicetree/bindings/arm/cpus.yaml). + + required: + - affinity + + clocks: + maxItems: 1 + + clock-names: + items: + - const: aclk + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + +dependencies: + mbi-ranges: [ msi-controller ] + msi-controller: [ mbi-ranges ] + +required: + - compatible + - reg + +patternProperties: + "^gic-its@": false + "^interrupt-controller@[0-9a-f]+$": false + # msi-controller is preferred, but allow other names + "^(msi-controller|gic-its|interrupt-controller)@[0-9a-f]+$": + type: object + description: + GICv3 has one or more Interrupt Translation Services (ITS) that are + used to route Message Signalled Interrupts (MSI) to the CPUs. + properties: + compatible: + const: arm,gic-v3-its + + msi-controller: true + + "#msi-cells": + description: + The single msi-cell is the DeviceID of the device which will generate + the MSI. + const: 1 + + reg: + description: + Specifies the base physical address and size of the ITS registers. + maxItems: 1 + + socionext,synquacer-pre-its: + description: + (u32, u32) tuple describing the untranslated + address and size of the pre-ITS window. + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + minItems: 2 + maxItems: 2 + + required: + - compatible + - msi-controller + - "#msi-cells" + - reg + + additionalProperties: false + +additionalProperties: false + +examples: + - | + gic: interrupt-controller@2cf00000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + interrupt-controller; + reg = <0x2f000000 0x10000>, // GICD + <0x2f100000 0x200000>, // GICR + <0x2c000000 0x2000>, // GICC + <0x2c010000 0x2000>, // GICH + <0x2c020000 0x2000>; // GICV + interrupts = <1 9 4>; + + msi-controller; + mbi-ranges = <256 128>; + + msi-controller@2c200000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0x2c200000 0x20000>; + }; + }; + + - | + interrupt-controller@2c010000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <4>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + interrupt-controller; + redistributor-stride = <0x0 0x40000>; // 256kB stride + #redistributor-regions = <2>; + reg = <0x2c010000 0x10000>, // GICD + <0x2d000000 0x800000>, // GICR 1: CPUs 0-31 + <0x2e000000 0x800000>, // GICR 2: CPUs 32-63 + <0x2c040000 0x2000>, // GICC + <0x2c060000 0x2000>, // GICH + <0x2c080000 0x2000>; // GICV + interrupts = <1 9 4 0>; + + msi-controller@2c200000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0x2c200000 0x20000>; + }; + + msi-controller@2c400000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0x2c400000 0x20000>; + }; + + ppi-partitions { + part0: interrupt-partition-0 { + affinity = <&cpu0>, <&cpu2>; + }; + + part1: interrupt-partition-1 { + affinity = <&cpu1>, <&cpu3>; + }; + }; + }; + + + device@0 { + reg = <0 4>; + interrupts = <1 1 4 &part0>; + }; + +... -- cgit v1.2.3