From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- .../devicetree/bindings/net/calxeda-xgmac.yaml | 49 ++++++++++++++++++++++ 1 file changed, 49 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/calxeda-xgmac.yaml (limited to 'Documentation/devicetree/bindings/net/calxeda-xgmac.yaml') diff --git a/Documentation/devicetree/bindings/net/calxeda-xgmac.yaml b/Documentation/devicetree/bindings/net/calxeda-xgmac.yaml new file mode 100644 index 000000000..c3ca26666 --- /dev/null +++ b/Documentation/devicetree/bindings/net/calxeda-xgmac.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/calxeda-xgmac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Calxeda Highbank 10Gb XGMAC Ethernet controller + +description: | + The Calxeda XGMAC Ethernet controllers are directly connected to the + internal machine "network fabric", which is set up, initialised and + managed by the firmware. So there are no PHY properties in this + binding. Switches in the fabric take care of routing and mapping the + traffic to external network ports. + +maintainers: + - Andre Przywara + +properties: + compatible: + const: calxeda,hb-xgmac + + reg: + maxItems: 1 + + interrupts: + description: | + Can point to at most 3 xgmac interrupts. The 1st one is the main + interrupt, the 2nd one is used for power management. The optional + 3rd one is the low power state interrupt. + minItems: 2 + maxItems: 3 + + dma-coherent: true + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + ethernet@fff50000 { + compatible = "calxeda,hb-xgmac"; + reg = <0xfff50000 0x1000>; + interrupts = <0 77 4>, <0 78 4>, <0 79 4>; + }; -- cgit v1.2.3