From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- .../devicetree/bindings/pci/83xx-512x-pci.txt | 39 + .../devicetree/bindings/pci/aardvark-pci.txt | 59 ++ .../devicetree/bindings/pci/altera-pcie-msi.txt | 27 + .../devicetree/bindings/pci/altera-pcie.txt | 50 ++ .../devicetree/bindings/pci/amlogic,meson-pcie.txt | 70 ++ .../devicetree/bindings/pci/apple,pcie.yaml | 174 +++++ .../devicetree/bindings/pci/axis,artpec6-pcie.txt | 50 ++ .../devicetree/bindings/pci/brcm,iproc-pcie.yaml | 184 +++++ .../devicetree/bindings/pci/brcm,stb-pcie.yaml | 185 +++++ .../devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml | 50 ++ .../bindings/pci/cdns,cdns-pcie-host.yaml | 75 ++ .../devicetree/bindings/pci/cdns-pcie-ep.yaml | 24 + .../devicetree/bindings/pci/cdns-pcie-host.yaml | 37 + .../devicetree/bindings/pci/cdns-pcie.yaml | 25 + .../devicetree/bindings/pci/faraday,ftpci100.yaml | 174 +++++ .../devicetree/bindings/pci/fsl,imx6q-pcie.yaml | 248 +++++++ Documentation/devicetree/bindings/pci/fsl,pci.txt | 27 + .../bindings/pci/hisilicon,kirin-pcie.yaml | 180 +++++ .../bindings/pci/hisilicon-histb-pcie.txt | 69 ++ .../devicetree/bindings/pci/host-generic-pci.yaml | 177 +++++ .../devicetree/bindings/pci/intel,ixp4xx-pci.yaml | 100 +++ .../bindings/pci/intel,keembay-pcie-ep.yaml | 69 ++ .../bindings/pci/intel,keembay-pcie.yaml | 97 +++ .../devicetree/bindings/pci/intel-gw-pcie.yaml | 117 +++ .../devicetree/bindings/pci/layerscape-pci.txt | 79 ++ .../bindings/pci/layerscape-pcie-gen4.txt | 52 ++ .../devicetree/bindings/pci/loongson.yaml | 63 ++ .../bindings/pci/mediatek,mt7621-pcie.yaml | 145 ++++ .../devicetree/bindings/pci/mediatek-pcie-cfg.yaml | 39 + .../bindings/pci/mediatek-pcie-gen3.yaml | 193 +++++ .../devicetree/bindings/pci/mediatek-pcie.txt | 289 ++++++++ .../bindings/pci/microchip,pcie-host.yaml | 140 ++++ .../devicetree/bindings/pci/mobiveil-pcie.txt | 72 ++ .../devicetree/bindings/pci/mvebu-pci.txt | 310 ++++++++ .../bindings/pci/nvidia,tegra194-pcie-ep.yaml | 319 ++++++++ .../bindings/pci/nvidia,tegra194-pcie.yaml | 350 +++++++++ .../bindings/pci/nvidia,tegra20-pcie.txt | 670 +++++++++++++++++ .../devicetree/bindings/pci/pci-armada8k.txt | 48 ++ Documentation/devicetree/bindings/pci/pci-ep.yaml | 47 ++ .../devicetree/bindings/pci/pci-iommu.txt | 171 +++++ Documentation/devicetree/bindings/pci/pci-msi.txt | 220 ++++++ Documentation/devicetree/bindings/pci/pci.txt | 84 +++ Documentation/devicetree/bindings/pci/pcie-al.txt | 46 ++ .../devicetree/bindings/pci/qcom,pcie-ep.yaml | 202 +++++ .../devicetree/bindings/pci/qcom,pcie.yaml | 825 +++++++++++++++++++++ .../devicetree/bindings/pci/ralink,rt3883-pci.txt | 187 +++++ .../devicetree/bindings/pci/rcar-pci-ep.yaml | 93 +++ .../devicetree/bindings/pci/rcar-pci-host.yaml | 125 ++++ .../bindings/pci/renesas,pci-rcar-gen2.yaml | 186 +++++ .../devicetree/bindings/pci/rockchip-dw-pcie.yaml | 131 ++++ .../devicetree/bindings/pci/rockchip-pcie-ep.txt | 62 ++ .../devicetree/bindings/pci/rockchip-pcie-host.txt | 135 ++++ .../bindings/pci/samsung,exynos-pcie.yaml | 119 +++ .../devicetree/bindings/pci/sifive,fu740-pcie.yaml | 120 +++ .../devicetree/bindings/pci/snps,dw-pcie-ep.yaml | 88 +++ .../devicetree/bindings/pci/snps,dw-pcie.yaml | 104 +++ .../bindings/pci/socionext,uniphier-pcie-ep.yaml | 108 +++ .../bindings/pci/socionext,uniphier-pcie.yaml | 117 +++ .../devicetree/bindings/pci/spear13xx-pcie.txt | 14 + .../devicetree/bindings/pci/ti,am65-pci-ep.yaml | 76 ++ .../devicetree/bindings/pci/ti,am65-pci-host.yaml | 106 +++ .../devicetree/bindings/pci/ti,j721e-pci-ep.yaml | 103 +++ .../devicetree/bindings/pci/ti,j721e-pci-host.yaml | 137 ++++ Documentation/devicetree/bindings/pci/ti-pci.txt | 102 +++ .../bindings/pci/toshiba,visconti-pcie.yaml | 111 +++ .../devicetree/bindings/pci/v3-v360epc-pci.txt | 76 ++ .../devicetree/bindings/pci/versatile.yaml | 94 +++ .../devicetree/bindings/pci/xgene-pci-msi.txt | 68 ++ .../devicetree/bindings/pci/xgene-pci.txt | 50 ++ .../devicetree/bindings/pci/xilinx-nwl-pcie.txt | 73 ++ .../devicetree/bindings/pci/xilinx-pcie.txt | 88 +++ .../devicetree/bindings/pci/xilinx-versal-cpm.yaml | 134 ++++ 72 files changed, 9478 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/83xx-512x-pci.txt create mode 100644 Documentation/devicetree/bindings/pci/aardvark-pci.txt create mode 100644 Documentation/devicetree/bindings/pci/altera-pcie-msi.txt create mode 100644 Documentation/devicetree/bindings/pci/altera-pcie.txt create mode 100644 Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt create mode 100644 Documentation/devicetree/bindings/pci/apple,pcie.yaml create mode 100644 Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt create mode 100644 Documentation/devicetree/bindings/pci/brcm,iproc-pcie.yaml create mode 100644 Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml create mode 100644 Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml create mode 100644 Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml create mode 100644 Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml create mode 100644 Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml create mode 100644 Documentation/devicetree/bindings/pci/cdns-pcie.yaml create mode 100644 Documentation/devicetree/bindings/pci/faraday,ftpci100.yaml create mode 100644 Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml create mode 100644 Documentation/devicetree/bindings/pci/fsl,pci.txt create mode 100644 Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml create mode 100644 Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt create mode 100644 Documentation/devicetree/bindings/pci/host-generic-pci.yaml create mode 100644 Documentation/devicetree/bindings/pci/intel,ixp4xx-pci.yaml create mode 100644 Documentation/devicetree/bindings/pci/intel,keembay-pcie-ep.yaml create mode 100644 Documentation/devicetree/bindings/pci/intel,keembay-pcie.yaml create mode 100644 Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml create mode 100644 Documentation/devicetree/bindings/pci/layerscape-pci.txt create mode 100644 Documentation/devicetree/bindings/pci/layerscape-pcie-gen4.txt create mode 100644 Documentation/devicetree/bindings/pci/loongson.yaml create mode 100644 Documentation/devicetree/bindings/pci/mediatek,mt7621-pcie.yaml create mode 100644 Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml create mode 100644 Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml create mode 100644 Documentation/devicetree/bindings/pci/mediatek-pcie.txt create mode 100644 Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml create mode 100644 Documentation/devicetree/bindings/pci/mobiveil-pcie.txt create mode 100644 Documentation/devicetree/bindings/pci/mvebu-pci.txt create mode 100644 Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie-ep.yaml create mode 100644 Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.yaml create mode 100644 Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt create mode 100644 Documentation/devicetree/bindings/pci/pci-armada8k.txt create mode 100644 Documentation/devicetree/bindings/pci/pci-ep.yaml create mode 100644 Documentation/devicetree/bindings/pci/pci-iommu.txt create mode 100644 Documentation/devicetree/bindings/pci/pci-msi.txt create mode 100644 Documentation/devicetree/bindings/pci/pci.txt create mode 100644 Documentation/devicetree/bindings/pci/pcie-al.txt create mode 100644 Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml create mode 100644 Documentation/devicetree/bindings/pci/qcom,pcie.yaml create mode 100644 Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt create mode 100644 Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml create mode 100644 Documentation/devicetree/bindings/pci/rcar-pci-host.yaml create mode 100644 Documentation/devicetree/bindings/pci/renesas,pci-rcar-gen2.yaml create mode 100644 Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml create mode 100644 Documentation/devicetree/bindings/pci/rockchip-pcie-ep.txt create mode 100644 Documentation/devicetree/bindings/pci/rockchip-pcie-host.txt create mode 100644 Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml create mode 100644 Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml create mode 100644 Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml create mode 100644 Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml create mode 100644 Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml create mode 100644 Documentation/devicetree/bindings/pci/socionext,uniphier-pcie.yaml create mode 100644 Documentation/devicetree/bindings/pci/spear13xx-pcie.txt create mode 100644 Documentation/devicetree/bindings/pci/ti,am65-pci-ep.yaml create mode 100644 Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml create mode 100644 Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml create mode 100644 Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml create mode 100644 Documentation/devicetree/bindings/pci/ti-pci.txt create mode 100644 Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml create mode 100644 Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt create mode 100644 Documentation/devicetree/bindings/pci/versatile.yaml create mode 100644 Documentation/devicetree/bindings/pci/xgene-pci-msi.txt create mode 100644 Documentation/devicetree/bindings/pci/xgene-pci.txt create mode 100644 Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt create mode 100644 Documentation/devicetree/bindings/pci/xilinx-pcie.txt create mode 100644 Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml (limited to 'Documentation/devicetree/bindings/pci') diff --git a/Documentation/devicetree/bindings/pci/83xx-512x-pci.txt b/Documentation/devicetree/bindings/pci/83xx-512x-pci.txt new file mode 100644 index 000000000..3abeecf49 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/83xx-512x-pci.txt @@ -0,0 +1,39 @@ +* Freescale 83xx and 512x PCI bridges + +Freescale 83xx and 512x SOCs include the same PCI bridge core. + +83xx/512x specific notes: +- reg: should contain two address length tuples + The first is for the internal PCI bridge registers + The second is for the PCI config space access registers + +Example (MPC8313ERDB) + pci0: pci@e0008500 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0E -mini PCI */ + 0x7000 0x0 0x0 0x1 &ipic 18 0x8 + 0x7000 0x0 0x0 0x2 &ipic 18 0x8 + 0x7000 0x0 0x0 0x3 &ipic 18 0x8 + 0x7000 0x0 0x0 0x4 &ipic 18 0x8 + + /* IDSEL 0x0F - PCI slot */ + 0x7800 0x0 0x0 0x1 &ipic 17 0x8 + 0x7800 0x0 0x0 0x2 &ipic 18 0x8 + 0x7800 0x0 0x0 0x3 &ipic 17 0x8 + 0x7800 0x0 0x0 0x4 &ipic 18 0x8>; + interrupt-parent = <&ipic>; + interrupts = <66 0x8>; + bus-range = <0x0 0x0>; + ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 + 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008500 0x100 /* internal registers */ + 0xe0008300 0x8>; /* config space access registers */ + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; diff --git a/Documentation/devicetree/bindings/pci/aardvark-pci.txt b/Documentation/devicetree/bindings/pci/aardvark-pci.txt new file mode 100644 index 000000000..2b8ca920a --- /dev/null +++ b/Documentation/devicetree/bindings/pci/aardvark-pci.txt @@ -0,0 +1,59 @@ +Aardvark PCIe controller + +This PCIe controller is used on the Marvell Armada 3700 ARM64 SoC. + +The Device Tree node describing an Aardvark PCIe controller must +contain the following properties: + + - compatible: Should be "marvell,armada-3700-pcie" + - reg: range of registers for the PCIe controller + - interrupts: the interrupt line of the PCIe controller + - #address-cells: set to <3> + - #size-cells: set to <2> + - device_type: set to "pci" + - ranges: ranges for the PCI memory and I/O regions + - #interrupt-cells: set to <1> + - msi-controller: indicates that the PCIe controller can itself + handle MSI interrupts + - msi-parent: pointer to the MSI controller to be used + - interrupt-map-mask and interrupt-map: standard PCI properties to + define the mapping of the PCIe interface to interrupt numbers. + - bus-range: PCI bus numbers covered + - phys: the PCIe PHY handle + - max-link-speed: see pci.txt + - reset-gpios: see pci.txt + +In addition, the Device Tree describing an Aardvark PCIe controller +must include a sub-node that describes the legacy interrupt controller +built into the PCIe controller. This sub-node must have the following +properties: + + - interrupt-controller + - #interrupt-cells: set to <1> + +Example: + + pcie0: pcie@d0070000 { + compatible = "marvell,armada-3700-pcie"; + device_type = "pci"; + reg = <0 0xd0070000 0 0x20000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + interrupts = ; + #interrupt-cells = <1>; + msi-controller; + msi-parent = <&pcie0>; + ranges = <0x82000000 0 0xe8000000 0 0xe8000000 0 0x1000000 /* Port 0 MEM */ + 0x81000000 0 0xe9000000 0 0xe9000000 0 0x10000>; /* Port 0 IO*/ + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc 0>, + <0 0 0 2 &pcie_intc 1>, + <0 0 0 3 &pcie_intc 2>, + <0 0 0 4 &pcie_intc 3>; + phys = <&comphy1 0>; + pcie_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/altera-pcie-msi.txt b/Documentation/devicetree/bindings/pci/altera-pcie-msi.txt new file mode 100644 index 000000000..9514c327d --- /dev/null +++ b/Documentation/devicetree/bindings/pci/altera-pcie-msi.txt @@ -0,0 +1,27 @@ +* Altera PCIe MSI controller + +Required properties: +- compatible: should contain "altr,msi-1.0" +- reg: specifies the physical base address of the controller and + the length of the memory mapped region. +- reg-names: must include the following entries: + "csr": CSR registers + "vector_slave": vectors slave port region +- interrupts: specifies the interrupt source of the parent interrupt + controller. The format of the interrupt specifier depends on the + parent interrupt controller. +- num-vectors: number of vectors, range 1 to 32. +- msi-controller: indicates that this is MSI controller node + + +Example +msi0: msi@0xFF200000 { + compatible = "altr,msi-1.0"; + reg = <0xFF200000 0x00000010 + 0xFF200010 0x00000080>; + reg-names = "csr", "vector_slave"; + interrupt-parent = <&hps_0_arm_gic_0>; + interrupts = <0 42 4>; + msi-controller; + num-vectors = <32>; +}; diff --git a/Documentation/devicetree/bindings/pci/altera-pcie.txt b/Documentation/devicetree/bindings/pci/altera-pcie.txt new file mode 100644 index 000000000..816b244a2 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/altera-pcie.txt @@ -0,0 +1,50 @@ +* Altera PCIe controller + +Required properties: +- compatible : should contain "altr,pcie-root-port-1.0" or "altr,pcie-root-port-2.0" +- reg: a list of physical base address and length for TXS and CRA. + For "altr,pcie-root-port-2.0", additional HIP base address and length. +- reg-names: must include the following entries: + "Txs": TX slave port region + "Cra": Control register access region + "Hip": Hard IP region (if "altr,pcie-root-port-2.0") +- interrupts: specifies the interrupt source of the parent interrupt + controller. The format of the interrupt specifier depends + on the parent interrupt controller. +- device_type: must be "pci" +- #address-cells: set to <3> +- #size-cells: set to <2> +- #interrupt-cells: set to <1> +- ranges: describes the translation of addresses for root ports and + standard PCI regions. +- interrupt-map-mask and interrupt-map: standard PCI properties to define the + mapping of the PCIe interface to interrupt numbers. + +Optional properties: +- msi-parent: Link to the hardware entity that serves as the MSI controller + for this PCIe controller. +- bus-range: PCI bus numbers covered + +Example + pcie_0: pcie@c00000000 { + compatible = "altr,pcie-root-port-1.0"; + reg = <0xc0000000 0x20000000>, + <0xff220000 0x00004000>; + reg-names = "Txs", "Cra"; + interrupt-parent = <&hps_0_arm_gic_0>; + interrupts = <0 40 4>; + interrupt-controller; + #interrupt-cells = <1>; + bus-range = <0x0 0xFF>; + device_type = "pci"; + msi-parent = <&msi_to_gic_gen_0>; + #address-cells = <3>; + #size-cells = <2>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_0 1>, + <0 0 0 2 &pcie_0 2>, + <0 0 0 3 &pcie_0 3>, + <0 0 0 4 &pcie_0 4>; + ranges = <0x82000000 0x00000000 0x00000000 0xc0000000 0x00000000 0x10000000 + 0x82000000 0x00000000 0x10000000 0xd0000000 0x00000000 0x10000000>; + }; diff --git a/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt b/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt new file mode 100644 index 000000000..c3a75ac6e --- /dev/null +++ b/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt @@ -0,0 +1,70 @@ +Amlogic Meson AXG DWC PCIE SoC controller + +Amlogic Meson PCIe host controller is based on the Synopsys DesignWare PCI core. +It shares common functions with the PCIe DesignWare core driver and +inherits common properties defined in +Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml. + +Additional properties are described here: + +Required properties: +- compatible: + should contain : + - "amlogic,axg-pcie" for AXG SoC Family + - "amlogic,g12a-pcie" for G12A SoC Family + to identify the core. +- reg: + should contain the configuration address space. +- reg-names: Must be + - "elbi" External local bus interface registers + - "cfg" Meson specific registers + - "config" PCIe configuration space +- reset-gpios: The GPIO to generate PCIe PERST# assert and deassert signal. +- clocks: Must contain an entry for each entry in clock-names. +- clock-names: Must include the following entries: + - "pclk" PCIe GEN 100M PLL clock + - "port" PCIe_x(A or B) RC clock gate + - "general" PCIe Phy clock +- resets: phandle to the reset lines. +- reset-names: must contain "port" and "apb" + - "port" Port A or B reset + - "apb" Share APB reset +- phys: should contain a phandle to the PCIE phy +- phy-names: must contain "pcie" + +- device_type: + should be "pci". As specified in snps,dw-pcie.yaml + + +Example configuration: + + pcie: pcie@f9800000 { + compatible = "amlogic,axg-pcie", "snps,dw-pcie"; + reg = <0x0 0xf9800000 0x0 0x400000 + 0x0 0xff646000 0x0 0x2000 + 0x0 0xf9f00000 0x0 0x100000>; + reg-names = "elbi", "cfg", "config"; + reset-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>; + interrupts = ; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 179 IRQ_TYPE_EDGE_RISING>; + bus-range = <0x0 0xff>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x82000000 0 0 0x0 0xf9c00000 0 0x00300000>; + + clocks = <&clkc CLKID_USB + &clkc CLKID_PCIE_A + &clkc CLKID_PCIE_CML_EN0>; + clock-names = "general", + "pclk", + "port"; + resets = <&reset RESET_PCIE_A>, + <&reset RESET_PCIE_APB>; + reset-names = "port", + "apb"; + phys = <&pcie_phy>; + phy-names = "pcie"; + }; diff --git a/Documentation/devicetree/bindings/pci/apple,pcie.yaml b/Documentation/devicetree/bindings/pci/apple,pcie.yaml new file mode 100644 index 000000000..aa38680aa --- /dev/null +++ b/Documentation/devicetree/bindings/pci/apple,pcie.yaml @@ -0,0 +1,174 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/apple,pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Apple PCIe host controller + +maintainers: + - Mark Kettenis + +description: | + The Apple PCIe host controller is a PCIe host controller with + multiple root ports present in Apple ARM SoC platforms, including + various iPhone and iPad devices and the "Apple Silicon" Macs. + The controller incorporates Synopsys DesigWare PCIe logic to + implements its root ports. But the ATU found on most DesignWare + PCIe host bridges is absent. + + All root ports share a single ECAM space, but separate GPIOs are + used to take the PCI devices on those ports out of reset. Therefore + the standard "reset-gpios" and "max-link-speed" properties appear on + the child nodes that represent the PCI bridges that correspond to + the individual root ports. + + MSIs are handled by the PCIe controller and translated into regular + interrupts. A range of 32 MSIs is provided. These 32 MSIs can be + distributed over the root ports as the OS sees fit by programming + the PCIe controller's port registers. + +properties: + compatible: + items: + - enum: + - apple,t8103-pcie + - apple,t6000-pcie + - const: apple,pcie + + reg: + minItems: 3 + maxItems: 6 + + reg-names: + minItems: 3 + items: + - const: config + - const: rc + - const: port0 + - const: port1 + - const: port2 + - const: port3 + + ranges: + minItems: 2 + maxItems: 2 + + interrupts: + description: + Interrupt specifiers, one for each root port. + minItems: 1 + maxItems: 4 + + msi-parent: true + + msi-ranges: + maxItems: 1 + + iommu-map: true + iommu-map-mask: true + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - reg-names + - bus-range + - interrupts + - msi-controller + - msi-parent + - msi-ranges + +unevaluatedProperties: false + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + - $ref: /schemas/interrupt-controller/msi-controller.yaml# + - if: + properties: + compatible: + contains: + const: apple,t8103-pcie + then: + properties: + reg: + maxItems: 5 + interrupts: + maxItems: 3 + +examples: + - | + #include + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie0: pcie@690000000 { + compatible = "apple,t8103-pcie", "apple,pcie"; + device_type = "pci"; + + reg = <0x6 0x90000000 0x0 0x1000000>, + <0x6 0x80000000 0x0 0x100000>, + <0x6 0x81000000 0x0 0x4000>, + <0x6 0x82000000 0x0 0x4000>, + <0x6 0x83000000 0x0 0x4000>; + reg-names = "config", "rc", "port0", "port1", "port2"; + + interrupt-parent = <&aic>; + interrupts = , + , + ; + + msi-controller; + msi-parent = <&pcie0>; + msi-ranges = <&aic AIC_IRQ 704 IRQ_TYPE_EDGE_RISING 32>; + + iommu-map = <0x100 &dart0 1 1>, + <0x200 &dart1 1 1>, + <0x300 &dart2 1 1>; + iommu-map-mask = <0xff00>; + + bus-range = <0 3>; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x43000000 0x6 0xa0000000 0x6 0xa0000000 0x0 0x20000000>, + <0x02000000 0x0 0xc0000000 0x6 0xc0000000 0x0 0x40000000>; + + power-domains = <&ps_apcie_gp>; + pinctrl-0 = <&pcie_pins>; + pinctrl-names = "default"; + + pci@0,0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + reset-gpios = <&pinctrl_ap 152 0>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; + + pci@1,0 { + device_type = "pci"; + reg = <0x800 0x0 0x0 0x0 0x0>; + reset-gpios = <&pinctrl_ap 153 0>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; + + pci@2,0 { + device_type = "pci"; + reg = <0x1000 0x0 0x0 0x0 0x0>; + reset-gpios = <&pinctrl_ap 33 0>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt b/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt new file mode 100644 index 000000000..cc6dcdb67 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt @@ -0,0 +1,50 @@ +* Axis ARTPEC-6 PCIe interface + +This PCIe host controller is based on the Synopsys DesignWare PCIe IP +and thus inherits all the common properties defined in snps,dw-pcie.yaml. + +Required properties: +- compatible: "axis,artpec6-pcie", "snps,dw-pcie" for ARTPEC-6 in RC mode; + "axis,artpec6-pcie-ep", "snps,dw-pcie" for ARTPEC-6 in EP mode; + "axis,artpec7-pcie", "snps,dw-pcie" for ARTPEC-7 in RC mode; + "axis,artpec7-pcie-ep", "snps,dw-pcie" for ARTPEC-7 in EP mode; +- reg: base addresses and lengths of the PCIe controller (DBI), + the PHY controller, and configuration address space. +- reg-names: Must include the following entries: + - "dbi" + - "phy" + - "config" +- interrupts: A list of interrupt outputs of the controller. Must contain an + entry for each entry in the interrupt-names property. +- interrupt-names: Must include the following entries: + - "msi": The interrupt that is asserted when an MSI is received +- axis,syscon-pcie: A phandle pointing to the ARTPEC-6 system controller, + used to enable and control the Synopsys IP. + +Example: + + pcie@f8050000 { + compatible = "axis,artpec6-pcie", "snps,dw-pcie"; + reg = <0xf8050000 0x2000 + 0xf8040000 0x1000 + 0xc0000000 0x2000>; + reg-names = "dbi", "phy", "config"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + /* downstream I/O */ + ranges = <0x81000000 0 0 0xc0002000 0 0x00010000 + /* non-prefetchable memory */ + 0x82000000 0 0xc0012000 0xc0012000 0 0x1ffee000>; + num-lanes = <2>; + bus-range = <0x00 0xff>; + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + axis,syscon-pcie = <&syscon>; + }; diff --git a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.yaml new file mode 100644 index 000000000..097286873 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.yaml @@ -0,0 +1,184 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/brcm,iproc-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom iProc PCIe controller with the platform bus interface + +maintainers: + - Ray Jui + - Scott Branden + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + - $ref: /schemas/interrupt-controller/msi-controller.yaml# + +properties: + compatible: + items: + - enum: + # for the first generation of PAXB based controller, used in SoCs + # including NSP, Cygnus, NS2, and Pegasus + - brcm,iproc-pcie + # for the second generation of PAXB-based controllers, used in + # Stingray + - brcm,iproc-pcie-paxb-v2 + # For the first generation of PAXC based controller, used in NS2 + - brcm,iproc-pcie-paxc + # For the second generation of PAXC based controller, used in Stingray + - brcm,iproc-pcie-paxc-v2 + + reg: + maxItems: 1 + description: > + Base address and length of the PCIe controller I/O register space + + interrupt-map: true + + interrupt-map-mask: true + + "#interrupt-cells": + const: 1 + + ranges: + minItems: 1 + maxItems: 2 + description: > + Ranges for the PCI memory and I/O regions + + phys: + maxItems: 1 + + phy-names: + items: + - const: pcie-phy + + bus-range: true + + dma-coherent: true + + "#address-cells": true + + "#size-cells": true + + device_type: true + + brcm,pcie-ob: + type: boolean + description: > + Some iProc SoCs do not have the outbound address mapping done by the + ASIC after power on reset. In this case, SW needs to configure it + + brcm,pcie-ob-axi-offset: + $ref: /schemas/types.yaml#/definitions/uint32 + description: > + The offset from the AXI address to the internal address used by the + iProc PCIe core (not the PCIe address) + + msi: + type: object + properties: + compatible: + items: + - const: brcm,iproc-msi + + msi-parent: true + + msi-controller: true + + brcm,pcie-msi-inten: + type: boolean + description: > + Needs to be present for some older iProc platforms that require the + interrupt enable registers to be set explicitly to enable MSI + +dependencies: + brcm,pcie-ob-axi-offset: ["brcm,pcie-ob"] + brcm,pcie-msi-inten: [msi-controller] + +required: + - compatible + - reg + - ranges + +if: + properties: + compatible: + contains: + enum: + - brcm,iproc-pcie +then: + required: + - interrupt-map + - interrupt-map-mask + +unevaluatedProperties: false + +examples: + - | + #include + + bus { + #address-cells = <1>; + #size-cells = <1>; + pcie0: pcie@18012000 { + compatible = "brcm,iproc-pcie"; + reg = <0x18012000 0x1000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>; + + linux,pci-domain = <0>; + + bus-range = <0x00 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x81000000 0 0 0x28000000 0 0x00010000>, + <0x82000000 0 0x20000000 0x20000000 0 0x04000000>; + + phys = <&phy 0 5>; + phy-names = "pcie-phy"; + + brcm,pcie-ob; + brcm,pcie-ob-axi-offset = <0x00000000>; + + msi-parent = <&msi0>; + + /* iProc event queue based MSI */ + msi0: msi { + compatible = "brcm,iproc-msi"; + msi-controller; + interrupt-parent = <&gic>; + interrupts = , + , + , + ; + }; + }; + + pcie1: pcie@18013000 { + compatible = "brcm,iproc-pcie"; + reg = <0x18013000 0x1000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>; + + linux,pci-domain = <1>; + + bus-range = <0x00 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x81000000 0 0 0x48000000 0 0x00010000>, + <0x82000000 0 0x40000000 0x40000000 0 0x04000000>; + + phys = <&phy 1 6>; + phy-names = "pcie-phy"; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml new file mode 100644 index 000000000..7e15aae7d --- /dev/null +++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml @@ -0,0 +1,185 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Brcmstb PCIe Host Controller + +maintainers: + - Nicolas Saenz Julienne + +properties: + compatible: + items: + - enum: + - brcm,bcm2711-pcie # The Raspberry Pi 4 + - brcm,bcm4908-pcie + - brcm,bcm7211-pcie # Broadcom STB version of RPi4 + - brcm,bcm7278-pcie # Broadcom 7278 Arm + - brcm,bcm7216-pcie # Broadcom 7216 Arm + - brcm,bcm7445-pcie # Broadcom 7445 Arm + - brcm,bcm7425-pcie # Broadcom 7425 MIPs + - brcm,bcm7435-pcie # Broadcom 7435 MIPs + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + items: + - description: PCIe host controller + - description: builtin MSI controller + + interrupt-names: + minItems: 1 + items: + - const: pcie + - const: msi + + ranges: + minItems: 1 + maxItems: 4 + + dma-ranges: + minItems: 1 + maxItems: 6 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: sw_pcie + + msi-controller: + description: Identifies the node as an MSI controller. + + msi-parent: + description: MSI controller the device is capable of using. + + brcm,enable-ssc: + description: Indicates usage of spread-spectrum clocking. + type: boolean + + aspm-no-l0s: true + + brcm,scb-sizes: + description: u64 giving the 64bit PCIe memory + viewport size of a memory controller. There may be up to + three controllers, and each size must be a power of two + with a size greater or equal to the amount of memory the + controller supports. Note that each memory controller + may have two component regions -- base and extended -- so + this information cannot be deduced from the dma-ranges. + $ref: /schemas/types.yaml#/definitions/uint64-array + items: + minItems: 1 + maxItems: 3 + +required: + - compatible + - reg + - ranges + - dma-ranges + - "#interrupt-cells" + - interrupts + - interrupt-names + - interrupt-map-mask + - interrupt-map + - msi-controller + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + - $ref: /schemas/interrupt-controller/msi-controller.yaml# + - if: + properties: + compatible: + contains: + const: brcm,bcm4908-pcie + then: + properties: + resets: + items: + - description: reset controller handling the PERST# signal + + reset-names: + items: + - const: perst + + required: + - resets + - reset-names + - if: + properties: + compatible: + contains: + const: brcm,bcm7216-pcie + then: + properties: + resets: + items: + - description: phandle pointing to the RESCAL reset controller + + reset-names: + items: + - const: rescal + + required: + - resets + - reset-names + +unevaluatedProperties: false + +examples: + - | + #include + #include + + scb { + #address-cells = <2>; + #size-cells = <1>; + pcie0: pcie@7d500000 { + compatible = "brcm,bcm2711-pcie"; + reg = <0x0 0x7d500000 0x9310>; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupts = , + ; + interrupt-names = "pcie", "msi"; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH + 0 0 0 2 &gicv2 GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH + 0 0 0 3 &gicv2 GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH + 0 0 0 4 &gicv2 GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + + msi-parent = <&pcie0>; + msi-controller; + ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>; + dma-ranges = <0x42000000 0x1 0x00000000 0x0 0x40000000 0x0 0x80000000>, + <0x42000000 0x1 0x80000000 0x3 0x00000000 0x0 0x80000000>; + brcm,enable-ssc; + brcm,scb-sizes = <0x0000000080000000 0x0000000080000000>; + + /* PCIe bridge, Root Port */ + pci@0,0 { + #address-cells = <3>; + #size-cells = <2>; + reg = <0x0 0x0 0x0 0x0 0x0>; + compatible = "pciclass,0604"; + device_type = "pci"; + vpcie3v3-supply = <&vreg7>; + ranges; + + /* PCIe endpoint */ + pci-ep@0,0 { + assigned-addresses = + <0x82010000 0x0 0xf8000000 0x6 0x00000000 0x0 0x2000>; + reg = <0x0 0x0 0x0 0x0 0x0>; + compatible = "pci14e4,1688"; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml new file mode 100644 index 000000000..e6ef1012a --- /dev/null +++ b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/cdns,cdns-pcie-ep.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cadence PCIe EP Controller + +maintainers: + - Tom Joseph + +allOf: + - $ref: "cdns-pcie-ep.yaml#" + +properties: + compatible: + const: cdns,cdns-pcie-ep + + reg: + maxItems: 2 + + reg-names: + items: + - const: reg + - const: mem + +required: + - reg + - reg-names + +unevaluatedProperties: false + +examples: + - | + bus { + #address-cells = <2>; + #size-cells = <2>; + + pcie-ep@fc000000 { + compatible = "cdns,cdns-pcie-ep"; + reg = <0x0 0xfc000000 0x0 0x01000000>, + <0x0 0x80000000 0x0 0x40000000>; + reg-names = "reg", "mem"; + cdns,max-outbound-regions = <16>; + max-functions = /bits/ 8 <8>; + phys = <&pcie_phy0>; + phy-names = "pcie-phy"; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml new file mode 100644 index 000000000..293b8ec31 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/cdns,cdns-pcie-host.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cadence PCIe host controller + +maintainers: + - Tom Joseph + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + - $ref: "cdns-pcie-host.yaml#" + +properties: + compatible: + const: cdns,cdns-pcie-host + + reg: + maxItems: 2 + + reg-names: + items: + - const: reg + - const: cfg + + msi-parent: true + +required: + - reg + - reg-names + +unevaluatedProperties: false + +examples: + - | + bus { + #address-cells = <2>; + #size-cells = <2>; + + pcie@fb000000 { + compatible = "cdns,cdns-pcie-host"; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x0 0xff>; + linux,pci-domain = <0>; + vendor-id = <0x17cd>; + device-id = <0x0200>; + + reg = <0x0 0xfb000000 0x0 0x01000000>, + <0x0 0x41000000 0x0 0x00001000>; + reg-names = "reg", "cfg"; + + ranges = <0x02000000 0x0 0x42000000 0x0 0x42000000 0x0 0x1000000>, + <0x01000000 0x0 0x43000000 0x0 0x43000000 0x0 0x0010000>; + dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x1 0x00000000>; + + #interrupt-cells = <0x1>; + + interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0x0 0x0 14 0x1>, + <0x0 0x0 0x0 0x2 &gic 0x0 0x0 0x0 15 0x1>, + <0x0 0x0 0x0 0x3 &gic 0x0 0x0 0x0 16 0x1>, + <0x0 0x0 0x0 0x4 &gic 0x0 0x0 0x0 17 0x1>; + + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + + msi-parent = <&its_pci>; + + phys = <&pcie_phy0>; + phy-names = "pcie-phy"; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml new file mode 100644 index 000000000..baeafda36 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml @@ -0,0 +1,24 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/pci/cdns-pcie-ep.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Cadence PCIe Device + +maintainers: + - Tom Joseph + +allOf: + - $ref: "cdns-pcie.yaml#" + - $ref: "pci-ep.yaml#" + +properties: + cdns,max-outbound-regions: + description: maximum number of outbound regions + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 32 + default: 32 + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml new file mode 100644 index 000000000..a944f9bff --- /dev/null +++ b/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/pci/cdns-pcie-host.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Cadence PCIe Host + +maintainers: + - Tom Joseph + +allOf: + - $ref: "/schemas/pci/pci-bus.yaml#" + - $ref: "cdns-pcie.yaml#" + +properties: + cdns,max-outbound-regions: + description: maximum number of outbound regions + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 32 + default: 32 + deprecated: true + + cdns,no-bar-match-nbits: + description: + Set into the no BAR match register to configure the number of least + significant bits kept during inbound (PCIe -> AXI) address translations + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 64 + default: 32 + deprecated: true + + msi-parent: true + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie.yaml new file mode 100644 index 000000000..df4fe2822 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/cdns-pcie.yaml @@ -0,0 +1,25 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/pci/cdns-pcie.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Cadence PCIe Core + +maintainers: + - Tom Joseph + +properties: + phys: + description: + One per lane if more than one in the list. If only one PHY listed it must + manage all lanes. + minItems: 1 + maxItems: 16 + + phy-names: + items: + - const: pcie-phy + # FIXME: names when more than 1 + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/pci/faraday,ftpci100.yaml b/Documentation/devicetree/bindings/pci/faraday,ftpci100.yaml new file mode 100644 index 000000000..92efbf0f1 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/faraday,ftpci100.yaml @@ -0,0 +1,174 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/faraday,ftpci100.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Faraday Technology FTPCI100 PCI Host Bridge + +maintainers: + - Linus Walleij + +description: | + This PCI bridge is found inside that Cortina Systems Gemini SoC platform and + is a generic IP block from Faraday Technology. It exists in two variants: + plain and dual PCI. The plain version embeds a cascading interrupt controller + into the host bridge. The dual version routes the interrupts to the host + chips interrupt controller. + The host controller appear on the PCI bus with vendor ID 0x159b (Faraday + Technology) and product ID 0x4321. + I/O space considerations: + The plain variant has 128MiB of non-prefetchable memory space, whereas the + "dual" variant has 64MiB. Take this into account when describing the ranges. + + Interrupt map considerations: + + The "dual" variant will get INT A, B, C, D from the system interrupt controller + and should point to respective interrupt in that controller in its interrupt-map. + + The code which is the only documentation of how the Faraday PCI (the non-dual + variant) interrupts assigns the default interrupt mapping/swizzling has + typically been like this, doing the swizzling on the interrupt controller side + rather than in the interconnect: + + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = + <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */ + <0x4800 0 0 2 &pci_intc 1>, + <0x4800 0 0 3 &pci_intc 2>, + <0x4800 0 0 4 &pci_intc 3>, + <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */ + <0x5000 0 0 2 &pci_intc 2>, + <0x5000 0 0 3 &pci_intc 3>, + <0x5000 0 0 4 &pci_intc 0>, + <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */ + <0x5800 0 0 2 &pci_intc 3>, + <0x5800 0 0 3 &pci_intc 0>, + <0x5800 0 0 4 &pci_intc 1>, + <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */ + <0x6000 0 0 2 &pci_intc 0>, + <0x6000 0 0 3 &pci_intc 1>, + <0x6000 0 0 4 &pci_intc 2>; + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + +properties: + compatible: + oneOf: + - items: + - const: cortina,gemini-pci + - const: faraday,ftpci100 + - items: + - const: cortina,gemini-pci-dual + - const: faraday,ftpci100-dual + - const: faraday,ftpci100 + - const: faraday,ftpci100-dual + + reg: + maxItems: 1 + + "#address-cells": + const: 3 + + "#interrupt-cells": + const: 1 + + ranges: + minItems: 2 + + dma-ranges: + minItems: 3 + description: | + three ranges for the inbound memory region. The ranges must + be aligned to a 1MB boundary, and may be 1MB, 2MB, 4MB, 8MB, 16MB, 32MB, 64MB, + 128MB, 256MB, 512MB, 1GB or 2GB in size. The memory should be marked as + pre-fetchable. + + clocks: + items: + - description: peripheral clock (PCLK) + - description: PCI clock (PCICLK). + description: | + If these are not present, they are assumed to be + hard-wired enabled and always on. The PCI clock will be 33 or 66 MHz. + + clock-names: + items: + - const: PCLK + - const: PCICLK + + interrupt-controller: + type: object + +required: + - reg + - compatible + - "#interrupt-cells" + - interrupt-map-mask + - interrupt-map + - dma-ranges + +if: + properties: + compatible: + contains: + const: faraday,ftpci100 +then: + required: + - interrupt-controller + +unevaluatedProperties: false + +examples: + - | + #include + pci@50000000 { + compatible = "cortina,gemini-pci", "faraday,ftpci100"; + reg = <0x50000000 0x100>; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + + bus-range = <0x00 0xff>; + ranges = /* 1MiB I/O space 0x50000000-0x500fffff */ + <0x01000000 0 0 0x50000000 0 0x00100000>, + /* 128MiB non-prefetchable memory 0x58000000-0x5fffffff */ + <0x02000000 0 0x58000000 0x58000000 0 0x08000000>; + + /* DMA ranges */ + dma-ranges = + /* 128MiB at 0x00000000-0x07ffffff */ + <0x02000000 0 0x00000000 0x00000000 0 0x08000000>, + /* 64MiB at 0x00000000-0x03ffffff */ + <0x02000000 0 0x00000000 0x00000000 0 0x04000000>, + /* 64MiB at 0x00000000-0x03ffffff */ + <0x02000000 0 0x00000000 0x00000000 0 0x04000000>; + + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = + <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */ + <0x4800 0 0 2 &pci_intc 1>, + <0x4800 0 0 3 &pci_intc 2>, + <0x4800 0 0 4 &pci_intc 3>, + <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */ + <0x5000 0 0 2 &pci_intc 2>, + <0x5000 0 0 3 &pci_intc 3>, + <0x5000 0 0 4 &pci_intc 0>, + <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */ + <0x5800 0 0 2 &pci_intc 3>, + <0x5800 0 0 3 &pci_intc 0>, + <0x5800 0 0 4 &pci_intc 1>, + <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */ + <0x6000 0 0 2 &pci_intc 0>, + <0x6000 0 0 3 &pci_intc 0>, + <0x6000 0 0 4 &pci_intc 0>; + pci_intc: interrupt-controller { + interrupt-parent = <&intcon>; + interrupt-controller; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml new file mode 100644 index 000000000..49b4f7a32 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml @@ -0,0 +1,248 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/fsl,imx6q-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX6 PCIe host controller + +maintainers: + - Lucas Stach + - Richard Zhu + +description: |+ + This PCIe host controller is based on the Synopsys DesignWare PCIe IP + and thus inherits all the common properties defined in snps,dw-pcie.yaml. + +properties: + compatible: + enum: + - fsl,imx6q-pcie + - fsl,imx6sx-pcie + - fsl,imx6qp-pcie + - fsl,imx7d-pcie + - fsl,imx8mq-pcie + - fsl,imx8mm-pcie + - fsl,imx8mp-pcie + + reg: + items: + - description: Data Bus Interface (DBI) registers. + - description: PCIe configuration space region. + + reg-names: + items: + - const: dbi + - const: config + + interrupts: + items: + - description: builtin MSI controller. + + interrupt-names: + items: + - const: msi + + clocks: + minItems: 3 + items: + - description: PCIe bridge clock. + - description: PCIe bus clock. + - description: PCIe PHY clock. + - description: Additional required clock entry for imx6sx-pcie, + imx8mq-pcie. + + clock-names: + minItems: 3 + items: + - const: pcie + - const: pcie_bus + - const: pcie_phy + - enum: [ pcie_inbound_axi, pcie_aux ] + + num-lanes: + const: 1 + + fsl,imx7d-pcie-phy: + $ref: /schemas/types.yaml#/definitions/phandle + description: A phandle to an fsl,imx7d-pcie-phy node. Additional + required properties for imx7d-pcie and imx8mq-pcie. + + power-domains: + items: + - description: The phandle pointing to the DISPLAY domain for + imx6sx-pcie, to PCIE_PHY power domain for imx7d-pcie and + imx8mq-pcie. + - description: The phandle pointing to the PCIE_PHY power domains + for imx6sx-pcie. + + power-domain-names: + items: + - const: pcie + - const: pcie_phy + + resets: + maxItems: 3 + description: Phandles to PCIe-related reset lines exposed by SRC + IP block. Additional required by imx7d-pcie and imx8mq-pcie. + + reset-names: + items: + - const: pciephy + - const: apps + - const: turnoff + + fsl,tx-deemph-gen1: + description: Gen1 De-emphasis value (optional required). + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + + fsl,tx-deemph-gen2-3p5db: + description: Gen2 (3.5db) De-emphasis value (optional required). + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + + fsl,tx-deemph-gen2-6db: + description: Gen2 (6db) De-emphasis value (optional required). + $ref: /schemas/types.yaml#/definitions/uint32 + default: 20 + + fsl,tx-swing-full: + description: Gen2 TX SWING FULL value (optional required). + $ref: /schemas/types.yaml#/definitions/uint32 + default: 127 + + fsl,tx-swing-low: + description: TX launch amplitude swing_low value (optional required). + $ref: /schemas/types.yaml#/definitions/uint32 + default: 127 + + fsl,max-link-speed: + description: Specify PCI Gen for link capability (optional required). + Note that the IMX6 LVDS clock outputs do not meet gen2 jitter + requirements and thus for gen2 capability a gen2 compliant clock + generator should be used and configured. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 3, 4] + default: 1 + + phys: + maxItems: 1 + + phy-names: + const: pcie-phy + + reset-gpio: + description: Should specify the GPIO for controlling the PCI bus device + reset signal. It's not polarity aware and defaults to active-low reset + sequence (L=reset state, H=operation state) (optional required). + + reset-gpio-active-high: + description: If present then the reset sequence using the GPIO + specified in the "reset-gpio" property is reversed (H=reset state, + L=operation state) (optional required). + type: boolean + + vpcie-supply: + description: Should specify the regulator in charge of PCIe port power. + The regulator will be enabled when initializing the PCIe host and + disabled either as part of the init process or when shutting down + the host (optional required). + + vph-supply: + description: Should specify the regulator in charge of VPH one of + the three PCIe PHY powers. This regulator can be supplied by both + 1.8v and 3.3v voltage supplies (optional required). + +required: + - compatible + - reg + - reg-names + - "#address-cells" + - "#size-cells" + - device_type + - bus-range + - ranges + - num-lanes + - interrupts + - interrupt-names + - "#interrupt-cells" + - interrupt-map-mask + - interrupt-map + - clocks + - clock-names + +allOf: + - $ref: /schemas/pci/snps,dw-pcie.yaml# + - if: + properties: + compatible: + contains: + const: fsl,imx6sx-pcie + then: + properties: + clock-names: + items: + - {} + - {} + - {} + - const: pcie_inbound_axi + - if: + properties: + compatible: + contains: + const: fsl,imx8mq-pcie + then: + properties: + clock-names: + items: + - {} + - {} + - {} + - const: pcie_aux + - if: + properties: + compatible: + not: + contains: + enum: + - fsl,imx6sx-pcie + - fsl,imx8mq-pcie + then: + properties: + clock-names: + maxItems: 3 + +unevaluatedProperties: false + +examples: + - | + #include + #include + + pcie: pcie@1ffc000 { + compatible = "fsl,imx6q-pcie"; + reg = <0x01ffc000 0x04000>, + <0x01f00000 0x80000>; + reg-names = "dbi", "config"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + bus-range = <0x00 0xff>; + ranges = <0x81000000 0 0 0x01f80000 0 0x00010000>, + <0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; + num-lanes = <1>; + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &gpc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6QDL_CLK_PCIE_AXI>, + <&clks IMX6QDL_CLK_LVDS1_GATE>, + <&clks IMX6QDL_CLK_PCIE_REF_125M>; + clock-names = "pcie", "pcie_bus", "pcie_phy"; + }; +... diff --git a/Documentation/devicetree/bindings/pci/fsl,pci.txt b/Documentation/devicetree/bindings/pci/fsl,pci.txt new file mode 100644 index 000000000..d8ac4a768 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/fsl,pci.txt @@ -0,0 +1,27 @@ +* Bus Enumeration by Freescale PCI-X Agent + +Typically any Freescale PCI-X bridge hardware strapped into Agent mode +is prevented from enumerating the bus. The PrPMC form-factor requires +all mezzanines to be PCI-X Agents, but one per system may still +enumerate the bus. + +The property defined below will allow a PCI-X bridge to be used for bus +enumeration despite being strapped into Agent mode. + +Required properties: +- fsl,pci-agent-force-enum : There is no value associated with this + property. The property itself is treated as a boolean. + +Example: + + /* PCI-X bridge known to be PrPMC Monarch */ + pci0: pci@ef008000 { + fsl,pci-agent-force-enum; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; + device_type = "pci"; + ... + ... + }; diff --git a/Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml b/Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml new file mode 100644 index 000000000..c9f04999c --- /dev/null +++ b/Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml @@ -0,0 +1,180 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/hisilicon,kirin-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HiSilicon Kirin SoCs PCIe host DT description + +maintainers: + - Xiaowei Song + - Binghui Wang + +description: | + Kirin PCIe host controller is based on the Synopsys DesignWare PCI core. + It shares common functions with the PCIe DesignWare core driver and + inherits common properties defined in + Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml. + +allOf: + - $ref: /schemas/pci/snps,dw-pcie.yaml# + +properties: + compatible: + contains: + enum: + - hisilicon,kirin960-pcie + - hisilicon,kirin970-pcie + + reg: + description: | + Should contain dbi, apb, config registers location and length. + For hisilicon,kirin960-pcie, it should also contain phy. + minItems: 3 + maxItems: 4 + + reg-names: + minItems: 3 + maxItems: 4 + + clocks: true + + clock-names: + items: + - const: pcie_phy_ref + - const: pcie_aux + - const: pcie_apb_phy + - const: pcie_apb_sys + - const: pcie_aclk + + phys: + maxItems: 1 + + hisilicon,clken-gpios: + description: | + Clock input enablement GPIOs from PCI devices like Ethernet, M.2 and + mini-PCIe slots. + +required: + - compatible + - reg + - reg-names + +unevaluatedProperties: false + +examples: + - | + #include + #include + #include + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie@f4000000 { + compatible = "hisilicon,kirin960-pcie"; + reg = <0x0 0xf4000000 0x0 0x1000>, + <0x0 0xff3fe000 0x0 0x1000>, + <0x0 0xf3f20000 0x0 0x40000>, + <0x0 0xf5000000 0x0 0x2000>; + reg-names = "dbi", "apb", "phy", "config"; + bus-range = <0x0 0xff>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x02000000 0x0 0x00000000 + 0x0 0xf6000000 + 0x0 0x02000000>; + num-lanes = <1>; + #interrupt-cells = <1>; + interrupts = <0 283 4>; + interrupt-names = "msi"; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0x0 0 0 1 &gic GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + <0x0 0 0 2 &gic GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <0x0 0 0 3 &gic GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, + <0x0 0 0 4 &gic GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_PCIEPHY_REF>, + <&crg_ctrl HI3660_CLK_GATE_PCIEAUX>, + <&crg_ctrl HI3660_PCLK_GATE_PCIE_PHY>, + <&crg_ctrl HI3660_PCLK_GATE_PCIE_SYS>, + <&crg_ctrl HI3660_ACLK_GATE_PCIE>; + clock-names = "pcie_phy_ref", "pcie_aux", "pcie_apb_phy", + "pcie_apb_sys", "pcie_aclk"; + }; + + pcie@f5000000 { + compatible = "hisilicon,kirin970-pcie"; + reg = <0x0 0xf4000000 0x0 0x1000000>, + <0x0 0xfc180000 0x0 0x1000>, + <0x0 0xf5000000 0x0 0x2000>; + reg-names = "dbi", "apb", "config"; + bus-range = <0x0 0xff>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + phys = <&pcie_phy>; + ranges = <0x02000000 0x0 0x00000000 + 0x0 0xf6000000 + 0x0 0x02000000>; + num-lanes = <1>; + #interrupt-cells = <1>; + interrupts = ; + interrupt-names = "msi"; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0x0 0 0 1 &gic GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + <0x0 0 0 2 &gic GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <0x0 0 0 3 &gic GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, + <0x0 0 0 4 &gic GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>; + reset-gpios = <&gpio7 0 0>; + hisilicon,clken-gpios = <&gpio27 3 0>, <&gpio17 0 0>, <&gpio20 6 0>; + pcie@0,0 { // Lane 0: PCIe switch: Bus 1, Device 0 + reg = <0 0 0 0 0>; + compatible = "pciclass,0604"; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + ranges; + + pcie@0,0 { // Lane 0: upstream + reg = <0 0 0 0 0>; + compatible = "pciclass,0604"; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + ranges; + + pcie@1,0 { // Lane 4: M.2 + reg = <0x0800 0 0 0 0>; + compatible = "pciclass,0604"; + device_type = "pci"; + reset-gpios = <&gpio3 1 0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; + + pcie@5,0 { // Lane 5: Mini PCIe + reg = <0x2800 0 0 0 0>; + compatible = "pciclass,0604"; + device_type = "pci"; + reset-gpios = <&gpio27 4 0 >; + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; + + pcie@7,0 { // Lane 6: Ethernet + reg = <0x03800 0 0 0 0>; + compatible = "pciclass,0604"; + device_type = "pci"; + reset-gpios = <&gpio25 2 0 >; + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt new file mode 100644 index 000000000..5f0cf6c2f --- /dev/null +++ b/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt @@ -0,0 +1,69 @@ +HiSilicon STB PCIe host bridge DT description + +The HiSilicon STB PCIe host controller is based on the DesignWare PCIe core. +It shares common functions with the DesignWare PCIe core driver and inherits +common properties defined in +Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml. + +Additional properties are described here: + +Required properties +- compatible: Should be one of the following strings: + "hisilicon,hi3798cv200-pcie" +- reg: Should contain sysctl, rc_dbi, config registers location and length. +- reg-names: Must include the following entries: + "control": control registers of PCIe controller; + "rc-dbi": configuration space of PCIe controller; + "config": configuration transaction space of PCIe controller. +- bus-range: PCI bus numbers covered. +- interrupts: MSI interrupt. +- interrupt-names: Must include "msi" entries. +- clocks: List of phandle and clock specifier pairs as listed in clock-names + property. +- clock-name: Must include the following entries: + "aux": auxiliary gate clock; + "pipe": pipe gate clock; + "sys": sys gate clock; + "bus": bus gate clock. +- resets: List of phandle and reset specifier pairs as listed in reset-names + property. +- reset-names: Must include the following entries: + "soft": soft reset; + "sys": sys reset; + "bus": bus reset. + +Optional properties: +- reset-gpios: The gpio to generate PCIe PERST# assert and deassert signal. +- vpcie-supply: The regulator in charge of PCIe port power. +- phys: List of phandle and phy mode specifier, should be 0. +- phy-names: Must be "phy". + +Example: + pcie@f9860000 { + compatible = "hisilicon,hi3798cv200-pcie"; + reg = <0xf9860000 0x1000>, + <0xf0000000 0x2000>, + <0xf2000000 0x01000000>; + reg-names = "control", "rc-dbi", "config"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + bus-range = <0 15>; + num-lanes = <1>; + ranges=<0x81000000 0 0 0xf4000000 0 0x00010000 + 0x82000000 0 0xf3000000 0xf3000000 0 0x01000000>; + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg PCIE_AUX_CLK>, + <&crg PCIE_PIPE_CLK>, + <&crg PCIE_SYS_CLK>, + <&crg PCIE_BUS_CLK>; + clock-names = "aux", "pipe", "sys", "bus"; + resets = <&crg 0x18c 6>, <&crg 0x18c 5>, <&crg 0x18c 4>; + reset-names = "soft", "sys", "bus"; + phys = <&combphy1 PHY_TYPE_PCIE>; + phy-names = "phy"; + }; diff --git a/Documentation/devicetree/bindings/pci/host-generic-pci.yaml b/Documentation/devicetree/bindings/pci/host-generic-pci.yaml new file mode 100644 index 000000000..d25423aa7 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/host-generic-pci.yaml @@ -0,0 +1,177 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/host-generic-pci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic PCI host controller + +maintainers: + - Will Deacon + +description: | + Firmware-initialised PCI host controllers and PCI emulations, such as the + virtio-pci implementations found in kvmtool and other para-virtualised + systems, do not require driver support for complexities such as regulator + and clock management. In fact, the controller may not even require the + configuration of a control interface by the operating system, instead + presenting a set of fixed windows describing a subset of IO, Memory and + Configuration Spaces. + + Configuration Space is assumed to be memory-mapped (as opposed to being + accessed via an ioport) and laid out with a direct correspondence to the + geography of a PCI bus address by concatenating the various components to + form an offset. + + For CAM, this 24-bit offset is: + + cfg_offset(bus, device, function, register) = + bus << 16 | device << 11 | function << 8 | register + + While ECAM extends this by 4 bits to accommodate 4k of function space: + + cfg_offset(bus, device, function, register) = + bus << 20 | device << 15 | function << 12 | register + +properties: + compatible: + description: Depends on the layout of configuration space (CAM vs ECAM + respectively). May also have more specific compatibles. + oneOf: + - description: + PCIe host controller in Arm Juno based on PLDA XpressRICH3-AXI IP + items: + - const: arm,juno-r1-pcie + - const: plda,xpressrich3-axi + - const: pci-host-ecam-generic + - description: | + ThunderX PCI host controller for pass-1.x silicon + + Firmware-initialized PCI host controller to on-chip devices found on + some Cavium ThunderX processors. These devices have ECAM-based config + access, but the BARs are all at fixed addresses. We handle the fixed + addresses by synthesizing Enhanced Allocation (EA) capabilities for + these devices. + const: cavium,pci-host-thunder-ecam + - description: + Cavium ThunderX PEM firmware-initialized PCIe host controller + const: cavium,pci-host-thunder-pem + - description: + HiSilicon Hip06/Hip07 PCIe host bridge in almost-ECAM mode. Some + firmware places the host controller in a mode where it is ECAM + compliant for all devices other than the root complex. + enum: + - hisilicon,hip06-pcie-ecam + - hisilicon,hip07-pcie-ecam + - description: | + In some cases, firmware may already have configured the Synopsys + DesignWare PCIe controller in RC mode with static ATU window mappings + that cover all config, MMIO and I/O spaces in a [mostly] ECAM + compatible fashion. In this case, there is no need for the OS to + perform any low level setup of clocks, PHYs or device registers, nor + is there any reason for the driver to reconfigure ATU windows for + config and/or IO space accesses at runtime. + + In cases where the IP was synthesized with a minimum ATU window size + of 64 KB, it cannot be supported by the generic ECAM driver, because + it requires special config space accessors that filter accesses to + device #1 and beyond on the first bus. + items: + - enum: + - marvell,armada8k-pcie-ecam + - socionext,synquacer-pcie-ecam + - const: snps,dw-pcie-ecam + - description: + CAM or ECAM compliant PCI host controllers without any quirks + enum: + - pci-host-cam-generic + - pci-host-ecam-generic + + reg: + description: + The Configuration Space base address and size, as accessed from the parent + bus. The base address corresponds to the first bus in the "bus-range" + property. If no "bus-range" is specified, this will be bus 0 (the + default). Some host controllers have a 2nd non-compliant address range, + so 2 entries are allowed. + minItems: 1 + maxItems: 2 + + ranges: + description: + As described in IEEE Std 1275-1994, but must provide at least a + definition of non-prefetchable memory. One or both of prefetchable Memory + and IO Space may also be provided. + minItems: 1 + maxItems: 3 + + dma-coherent: true + iommu-map: true + iommu-map-mask: true + msi-parent: true + +required: + - compatible + - reg + - ranges + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + - if: + properties: + compatible: + contains: + const: arm,juno-r1-pcie + then: + required: + - dma-coherent + + - if: + properties: + compatible: + not: + contains: + enum: + - cavium,pci-host-thunder-pem + - hisilicon,hip06-pcie-ecam + - hisilicon,hip07-pcie-ecam + then: + properties: + reg: + maxItems: 1 + +unevaluatedProperties: false + +examples: + - | + + bus { + #address-cells = <2>; + #size-cells = <2>; + pcie@40000000 { + compatible = "pci-host-cam-generic"; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x0 0x1>; + + // CPU_PHYSICAL(2) SIZE(2) + reg = <0x0 0x40000000 0x0 0x1000000>; + + // BUS_ADDRESS(3) CPU_PHYSICAL(2) SIZE(2) + ranges = <0x01000000 0x0 0x01000000 0x0 0x01000000 0x0 0x00010000>, + <0x02000000 0x0 0x41000000 0x0 0x41000000 0x0 0x3f000000>; + + #interrupt-cells = <0x1>; + + // PCI_DEVICE(3) INT#(1) CONTROLLER(PHANDLE) CONTROLLER_DATA(3) + interrupt-map = < 0x0 0x0 0x0 0x1 &gic 0x0 0x4 0x1>, + < 0x800 0x0 0x0 0x1 &gic 0x0 0x5 0x1>, + <0x1000 0x0 0x0 0x1 &gic 0x0 0x6 0x1>, + <0x1800 0x0 0x0 0x1 &gic 0x0 0x7 0x1>; + + // PCI_DEVICE(3) INT#(1) + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pci/intel,ixp4xx-pci.yaml b/Documentation/devicetree/bindings/pci/intel,ixp4xx-pci.yaml new file mode 100644 index 000000000..debfb54a8 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/intel,ixp4xx-pci.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/intel,ixp4xx-pci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel IXP4xx PCI controller + +maintainers: + - Linus Walleij + +description: PCI host controller found in the Intel IXP4xx SoC series. + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + +properties: + compatible: + items: + - enum: + - intel,ixp42x-pci + - intel,ixp43x-pci + description: The two supported variants are ixp42x and ixp43x, + though more variants may exist. + + reg: + items: + - description: IXP4xx-specific registers + + interrupts: + items: + - description: Main PCI interrupt + - description: PCI DMA interrupt 1 + - description: PCI DMA interrupt 2 + + ranges: + maxItems: 2 + description: Typically one memory range of 64MB and one IO + space range of 64KB. + + dma-ranges: + maxItems: 1 + description: The DMA range tells the PCI host which addresses + the RAM is at. It can map only 64MB so if the RAM is bigger + than 64MB the DMA access has to be restricted to these + addresses. + + "#interrupt-cells": true + + interrupt-map: true + + interrupt-map-mask: + items: + - const: 0xf800 + - const: 0 + - const: 0 + - const: 7 + +required: + - compatible + - reg + - dma-ranges + - "#interrupt-cells" + - interrupt-map + - interrupt-map-mask + +unevaluatedProperties: false + +examples: + - | + pci@c0000000 { + compatible = "intel,ixp43x-pci"; + reg = <0xc0000000 0x1000>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + bus-range = <0x00 0xff>; + + ranges = + <0x02000000 0 0x48000000 0x48000000 0 0x04000000>, + <0x01000000 0 0x00000000 0x4c000000 0 0x00010000>; + dma-ranges = + <0x02000000 0 0x00000000 0x00000000 0 0x04000000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = + <0x0800 0 0 1 &gpio0 11 3>, /* INT A on slot 1 is irq 11 */ + <0x0800 0 0 2 &gpio0 10 3>, /* INT B on slot 1 is irq 10 */ + <0x0800 0 0 3 &gpio0 9 3>, /* INT C on slot 1 is irq 9 */ + <0x0800 0 0 4 &gpio0 8 3>, /* INT D on slot 1 is irq 8 */ + <0x1000 0 0 1 &gpio0 10 3>, /* INT A on slot 2 is irq 10 */ + <0x1000 0 0 2 &gpio0 9 3>, /* INT B on slot 2 is irq 9 */ + <0x1000 0 0 3 &gpio0 8 3>, /* INT C on slot 2 is irq 8 */ + <0x1000 0 0 4 &gpio0 11 3>, /* INT D on slot 2 is irq 11 */ + <0x1800 0 0 1 &gpio0 9 3>, /* INT A on slot 3 is irq 9 */ + <0x1800 0 0 2 &gpio0 8 3>, /* INT B on slot 3 is irq 8 */ + <0x1800 0 0 3 &gpio0 11 3>, /* INT C on slot 3 is irq 11 */ + <0x1800 0 0 4 &gpio0 10 3>; /* INT D on slot 3 is irq 10 */ + }; diff --git a/Documentation/devicetree/bindings/pci/intel,keembay-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/intel,keembay-pcie-ep.yaml new file mode 100644 index 000000000..e87ff2752 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/intel,keembay-pcie-ep.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/pci/intel,keembay-pcie-ep.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Intel Keem Bay PCIe controller Endpoint mode + +maintainers: + - Wan Ahmad Zainie + - Srikanth Thokala + +properties: + compatible: + const: intel,keembay-pcie-ep + + reg: + maxItems: 5 + + reg-names: + items: + - const: dbi + - const: dbi2 + - const: atu + - const: addr_space + - const: apb + + interrupts: + maxItems: 4 + + interrupt-names: + items: + - const: pcie + - const: pcie_ev + - const: pcie_err + - const: pcie_mem_access + + num-lanes: + description: Number of lanes to use. + enum: [ 1, 2 ] + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-names + +additionalProperties: false + +examples: + - | + #include + #include + pcie-ep@37000000 { + compatible = "intel,keembay-pcie-ep"; + reg = <0x37000000 0x00001000>, + <0x37100000 0x00001000>, + <0x37300000 0x00001000>, + <0x36000000 0x01000000>, + <0x37800000 0x00000200>; + reg-names = "dbi", "dbi2", "atu", "addr_space", "apb"; + interrupts = , + , + , + ; + interrupt-names = "pcie", "pcie_ev", "pcie_err", "pcie_mem_access"; + num-lanes = <2>; + }; diff --git a/Documentation/devicetree/bindings/pci/intel,keembay-pcie.yaml b/Documentation/devicetree/bindings/pci/intel,keembay-pcie.yaml new file mode 100644 index 000000000..ed4400c9a --- /dev/null +++ b/Documentation/devicetree/bindings/pci/intel,keembay-pcie.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/pci/intel,keembay-pcie.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Intel Keem Bay PCIe controller Root Complex mode + +maintainers: + - Wan Ahmad Zainie + - Srikanth Thokala + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + +properties: + compatible: + const: intel,keembay-pcie + + ranges: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + reg: + maxItems: 4 + + reg-names: + items: + - const: dbi + - const: atu + - const: config + - const: apb + + clocks: + maxItems: 2 + + clock-names: + items: + - const: master + - const: aux + + interrupts: + maxItems: 3 + + interrupt-names: + items: + - const: pcie + - const: pcie_ev + - const: pcie_err + + num-lanes: + description: Number of lanes to use. + enum: [ 1, 2 ] + +required: + - compatible + - reg + - reg-names + - ranges + - clocks + - clock-names + - interrupts + - interrupt-names + - reset-gpios + +unevaluatedProperties: false + +examples: + - | + #include + #include + #include + #define KEEM_BAY_A53_PCIE + #define KEEM_BAY_A53_AUX_PCIE + pcie@37000000 { + compatible = "intel,keembay-pcie"; + reg = <0x37000000 0x00001000>, + <0x37300000 0x00001000>, + <0x36e00000 0x00200000>, + <0x37800000 0x00000200>; + reg-names = "dbi", "atu", "config", "apb"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x02000000 0 0x36000000 0x36000000 0 0x00e00000>; + interrupts = , + , + ; + interrupt-names = "pcie", "pcie_ev", "pcie_err"; + clocks = <&scmi_clk KEEM_BAY_A53_PCIE>, + <&scmi_clk KEEM_BAY_A53_AUX_PCIE>; + clock-names = "master", "aux"; + reset-gpios = <&pca2 9 GPIO_ACTIVE_LOW>; + num-lanes = <2>; + }; diff --git a/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml b/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml new file mode 100644 index 000000000..54e2890ae --- /dev/null +++ b/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml @@ -0,0 +1,117 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/intel-gw-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PCIe RC controller on Intel Gateway SoCs + +maintainers: + - Rahul Tanwar + +select: + properties: + compatible: + contains: + const: intel,lgm-pcie + required: + - compatible + +allOf: + - $ref: /schemas/pci/snps,dw-pcie.yaml# + +properties: + compatible: + items: + - const: intel,lgm-pcie + - const: snps,dw-pcie + + reg: + items: + - description: Controller control and status registers. + - description: PCIe configuration registers. + - description: Controller application registers. + + reg-names: + items: + - const: dbi + - const: config + - const: app + + ranges: + maxItems: 1 + + resets: + maxItems: 1 + + clocks: + maxItems: 1 + + phys: + maxItems: 1 + + phy-names: + const: pcie + + reset-gpios: + maxItems: 1 + + num-lanes: + maximum: 2 + + max-link-speed: + enum: [1, 2, 3, 4] + default: 1 + + reset-assert-ms: + description: | + Delay after asserting reset to the PCIe device. + maximum: 500 + default: 100 + +required: + - compatible + - reg + - reg-names + - ranges + - resets + - clocks + - phys + - phy-names + - reset-gpios + - '#interrupt-cells' + - interrupt-map + - interrupt-map-mask + +unevaluatedProperties: false + +examples: + - | + #include + pcie10: pcie@d0e00000 { + compatible = "intel,lgm-pcie", "snps,dw-pcie"; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + reg = <0xd0e00000 0x1000>, + <0xd2000000 0x800000>, + <0xd0a41000 0x1000>; + reg-names = "dbi", "config", "app"; + linux,pci-domain = <0>; + max-link-speed = <4>; + bus-range = <0x00 0x08>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &ioapic1 27 1>, + <0 0 0 2 &ioapic1 28 1>, + <0 0 0 3 &ioapic1 29 1>, + <0 0 0 4 &ioapic1 30 1>; + ranges = <0x02000000 0 0xd4000000 0xd4000000 0 0x04000000>; + resets = <&rcu0 0x50 0>; + clocks = <&cgu0 120>; + phys = <&cb0phy0>; + phy-names = "pcie"; + reset-assert-ms = <500>; + reset-gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; + num-lanes = <2>; + }; diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt new file mode 100644 index 000000000..ee8a4791a --- /dev/null +++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt @@ -0,0 +1,79 @@ +Freescale Layerscape PCIe controller + +This PCIe host controller is based on the Synopsys DesignWare PCIe IP +and thus inherits all the common properties defined in snps,dw-pcie.yaml. + +This controller derives its clocks from the Reset Configuration Word (RCW) +which is used to describe the PLL settings at the time of chip-reset. + +Also as per the available Reference Manuals, there is no specific 'version' +register available in the Freescale PCIe controller register set, +which can allow determining the underlying DesignWare PCIe controller version +information. + +Required properties: +- compatible: should contain the platform identifier such as: + RC mode: + "fsl,ls1021a-pcie" + "fsl,ls2080a-pcie", "fsl,ls2085a-pcie" + "fsl,ls2088a-pcie" + "fsl,ls1088a-pcie" + "fsl,ls1046a-pcie" + "fsl,ls1043a-pcie" + "fsl,ls1012a-pcie" + "fsl,ls1028a-pcie" + EP mode: + "fsl,ls1028a-pcie-ep", "fsl,ls-pcie-ep" + "fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep" + "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep" + "fsl,ls2088a-pcie-ep", "fsl,ls-pcie-ep" + "fsl,lx2160ar2-pcie-ep", "fsl,ls-pcie-ep" +- reg: base addresses and lengths of the PCIe controller register blocks. +- interrupts: A list of interrupt outputs of the controller. Must contain an + entry for each entry in the interrupt-names property. +- interrupt-names: It could include the following entries: + "aer": Used for interrupt line which reports AER events when + non MSI/MSI-X/INTx mode is used + "pme": Used for interrupt line which reports PME events when + non MSI/MSI-X/INTx mode is used + "intr": Used for SoCs(like ls2080a, lx2160a, ls2080a, ls2088a, ls1088a) + which has a single interrupt line for miscellaneous controller + events(could include AER and PME events). +- fsl,pcie-scfg: Must include two entries. + The first entry must be a link to the SCFG device node + The second entry is the physical PCIe controller index starting from '0'. + This is used to get SCFG PEXN registers +- dma-coherent: Indicates that the hardware IP block can ensure the coherency + of the data transferred from/to the IP block. This can avoid the software + cache flush/invalid actions, and improve the performance significantly. + +Optional properties: +- big-endian: If the PEX_LUT and PF register block is in big-endian, specify + this property. + +Example: + + pcie@3400000 { + compatible = "fsl,ls1088a-pcie"; + reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */ + <0x20 0x00000000 0x0 0x00002000>; /* configuration space */ + reg-names = "regs", "config"; + interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */ + interrupt-names = "aer"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + dma-coherent; + num-viewport = <256>; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + msi-parent = <&its>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 0 0 109 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 2 &gic 0 0 0 110 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 3 &gic 0 0 0 111 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 4 &gic 0 0 0 112 IRQ_TYPE_LEVEL_HIGH>; + iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */ + }; diff --git a/Documentation/devicetree/bindings/pci/layerscape-pcie-gen4.txt b/Documentation/devicetree/bindings/pci/layerscape-pcie-gen4.txt new file mode 100644 index 000000000..b40fb5d15 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/layerscape-pcie-gen4.txt @@ -0,0 +1,52 @@ +NXP Layerscape PCIe Gen4 controller + +This PCIe controller is based on the Mobiveil PCIe IP and thus inherits all +the common properties defined in mobiveil-pcie.txt. + +Required properties: +- compatible: should contain the platform identifier such as: + "fsl,lx2160a-pcie" +- reg: base addresses and lengths of the PCIe controller register blocks. + "csr_axi_slave": Bridge config registers + "config_axi_slave": PCIe controller registers +- interrupts: A list of interrupt outputs of the controller. Must contain an + entry for each entry in the interrupt-names property. +- interrupt-names: It could include the following entries: + "intr": The interrupt that is asserted for controller interrupts + "aer": Asserted for aer interrupt when chip support the aer interrupt with + none MSI/MSI-X/INTx mode,but there is interrupt line for aer. + "pme": Asserted for pme interrupt when chip support the pme interrupt with + none MSI/MSI-X/INTx mode,but there is interrupt line for pme. +- dma-coherent: Indicates that the hardware IP block can ensure the coherency + of the data transferred from/to the IP block. This can avoid the software + cache flush/invalid actions, and improve the performance significantly. +- msi-parent : See the generic MSI binding described in + Documentation/devicetree/bindings/interrupt-controller/msi.txt. + +Example: + + pcie@3400000 { + compatible = "fsl,lx2160a-pcie"; + reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ + 0x80 0x00000000 0x0 0x00001000>; /* configuration space */ + reg-names = "csr_axi_slave", "config_axi_slave"; + interrupts = , /* AER interrupt */ + , /* PME interrupt */ + ; /* controller interrupt */ + interrupt-names = "aer", "pme", "intr"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + apio-wins = <8>; + ppio-wins = <8>; + dma-coherent; + bus-range = <0x0 0xff>; + msi-parent = <&its>; + ranges = <0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 2 &gic 0 0 GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 3 &gic 0 0 GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 4 &gic 0 0 GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/pci/loongson.yaml b/Documentation/devicetree/bindings/pci/loongson.yaml new file mode 100644 index 000000000..a8324a9bd --- /dev/null +++ b/Documentation/devicetree/bindings/pci/loongson.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/loongson.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Loongson PCI Host Controller + +maintainers: + - Jiaxun Yang + +description: |+ + PCI host controller found on Loongson PCHs and SoCs. + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + +properties: + compatible: + enum: + - loongson,ls2k-pci + - loongson,ls7a-pci + - loongson,rs780e-pci + + reg: + minItems: 1 + items: + - description: CFG0 standard config space register + - description: CFG1 extended config space register + + ranges: + minItems: 1 + maxItems: 3 + + +required: + - compatible + - reg + - ranges + +unevaluatedProperties: false + +examples: + - | + + bus { + #address-cells = <2>; + #size-cells = <2>; + pcie@1a000000 { + compatible = "loongson,rs780e-pci"; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + + // CPU_PHYSICAL(2) SIZE(2) + reg = <0x0 0x1a000000 0x0 0x2000000>; + + // BUS_ADDRESS(3) CPU_PHYSICAL(2) SIZE(2) + ranges = <0x01000000 0x0 0x00004000 0x0 0x00004000 0x0 0x00004000>, + <0x02000000 0x0 0x40000000 0x0 0x40000000 0x0 0x40000000>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pci/mediatek,mt7621-pcie.yaml b/Documentation/devicetree/bindings/pci/mediatek,mt7621-pcie.yaml new file mode 100644 index 000000000..d60f43fd9 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/mediatek,mt7621-pcie.yaml @@ -0,0 +1,145 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/mediatek,mt7621-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT7621 PCIe controller + +maintainers: + - Sergio Paracuellos + +description: |+ + MediaTek MT7621 PCIe subsys supports a single Root Complex (RC) + with 3 Root Ports. Each Root Port supports a Gen1 1-lane Link + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + +properties: + compatible: + const: mediatek,mt7621-pci + + reg: + items: + - description: host-pci bridge registers + - description: pcie port 0 RC control registers + - description: pcie port 1 RC control registers + - description: pcie port 2 RC control registers + + ranges: + maxItems: 2 + +patternProperties: + 'pcie@[0-2],0': + type: object + $ref: /schemas/pci/pci-bus.yaml# + + properties: + resets: + maxItems: 1 + + clocks: + maxItems: 1 + + phys: + maxItems: 1 + + phy-names: + pattern: '^pcie-phy[0-2]$' + + required: + - "#interrupt-cells" + - interrupt-map-mask + - interrupt-map + - resets + - clocks + - phys + - phy-names + - ranges + + unevaluatedProperties: false + +required: + - compatible + - reg + - ranges + - "#interrupt-cells" + - interrupt-map-mask + - interrupt-map + - reset-gpios + +unevaluatedProperties: false + +examples: + - | + #include + #include + + pcie: pcie@1e140000 { + compatible = "mediatek,mt7621-pci"; + reg = <0x1e140000 0x100>, + <0x1e142000 0x100>, + <0x1e143000 0x100>, + <0x1e144000 0x100>; + + #address-cells = <3>; + #size-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_pins>; + device_type = "pci"; + ranges = <0x02000000 0 0x60000000 0x60000000 0 0x10000000>, /* pci memory */ + <0x01000000 0 0x1e160000 0x1e160000 0 0x00010000>; /* io space */ + #interrupt-cells = <1>; + interrupt-map-mask = <0xF800 0 0 0>; + interrupt-map = <0x0000 0 0 0 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>, + <0x0800 0 0 0 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>, + <0x1000 0 0 0 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>; + reset-gpios = <&gpio 19 GPIO_ACTIVE_LOW>; + + pcie@0,0 { + reg = <0x0000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rstctrl 24>; + clocks = <&clkctrl 24>; + phys = <&pcie0_phy 1>; + phy-names = "pcie-phy0"; + ranges; + }; + + pcie@1,0 { + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rstctrl 25>; + clocks = <&clkctrl 25>; + phys = <&pcie0_phy 1>; + phy-names = "pcie-phy1"; + ranges; + }; + + pcie@2,0 { + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rstctrl 26>; + clocks = <&clkctrl 26>; + phys = <&pcie2_phy 0>; + phy-names = "pcie-phy2"; + ranges; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml new file mode 100644 index 000000000..841a3d284 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/mediatek-pcie-cfg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek PCIECFG controller + +maintainers: + - Chuanjia Liu + - Jianjun Wang + +description: | + The MediaTek PCIECFG controller controls some feature about + LTSSM, ASPM and so on. + +properties: + compatible: + items: + - enum: + - mediatek,generic-pciecfg + - const: syscon + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + pciecfg: pciecfg@1a140000 { + compatible = "mediatek,generic-pciecfg", "syscon"; + reg = <0x1a140000 0x1000>; + }; +... diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml new file mode 100644 index 000000000..c00be39af --- /dev/null +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml @@ -0,0 +1,193 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/mediatek-pcie-gen3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Gen3 PCIe controller on MediaTek SoCs + +maintainers: + - Jianjun Wang + +description: |+ + PCIe Gen3 MAC controller for MediaTek SoCs, it supports Gen3 speed + and compatible with Gen2, Gen1 speed. + + This PCIe controller supports up to 256 MSI vectors, the MSI hardware + block diagram is as follows: + + +-----+ + | GIC | + +-----+ + ^ + | + port->irq + | + +-+-+-+-+-+-+-+-+ + |0|1|2|3|4|5|6|7| (PCIe intc) + +-+-+-+-+-+-+-+-+ + ^ ^ ^ + | | ... | + +-------+ +------+ +-----------+ + | | | + +-+-+---+--+--+ +-+-+---+--+--+ +-+-+---+--+--+ + |0|1|...|30|31| |0|1|...|30|31| |0|1|...|30|31| (MSI sets) + +-+-+---+--+--+ +-+-+---+--+--+ +-+-+---+--+--+ + ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ + | | | | | | | | | | | | (MSI vectors) + | | | | | | | | | | | | + + (MSI SET0) (MSI SET1) ... (MSI SET7) + + With 256 MSI vectors supported, the MSI vectors are composed of 8 sets, + each set has its own address for MSI message, and supports 32 MSI vectors + to generate interrupt. + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - mediatek,mt8188-pcie + - mediatek,mt8195-pcie + - const: mediatek,mt8192-pcie + - const: mediatek,mt8192-pcie + + reg: + maxItems: 1 + + reg-names: + items: + - const: pcie-mac + + interrupts: + maxItems: 1 + + ranges: + minItems: 1 + maxItems: 8 + + resets: + minItems: 1 + maxItems: 2 + + reset-names: + minItems: 1 + items: + - const: phy + - const: mac + + clocks: + maxItems: 6 + + clock-names: + items: + - const: pl_250m + - const: tl_26m + - const: tl_96m + - const: tl_32k + - const: peri_26m + - enum: + - top_133m # for MT8192 + - peri_mem # for MT8188/MT8195 + + assigned-clocks: + maxItems: 1 + + assigned-clock-parents: + maxItems: 1 + + phys: + maxItems: 1 + + phy-names: + items: + - const: pcie-phy + + '#interrupt-cells': + const: 1 + + interrupt-controller: + description: Interrupt controller node for handling legacy PCI interrupts. + type: object + properties: + '#address-cells': + const: 0 + '#interrupt-cells': + const: 1 + interrupt-controller: true + + required: + - '#address-cells' + - '#interrupt-cells' + - interrupt-controller + + additionalProperties: false + +required: + - compatible + - reg + - reg-names + - interrupts + - ranges + - clocks + - clock-names + - '#interrupt-cells' + - interrupt-controller + +unevaluatedProperties: false + +examples: + - | + #include + #include + + bus { + #address-cells = <2>; + #size-cells = <2>; + + pcie: pcie@11230000 { + compatible = "mediatek,mt8192-pcie"; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + reg = <0x00 0x11230000 0x00 0x4000>; + reg-names = "pcie-mac"; + interrupts = ; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0x00 0x12000000 0x00 + 0x12000000 0x00 0x1000000>; + clocks = <&infracfg 44>, + <&infracfg 40>, + <&infracfg 43>, + <&infracfg 97>, + <&infracfg 99>, + <&infracfg 111>; + clock-names = "pl_250m", "tl_26m", "tl_96m", + "tl_32k", "peri_26m", "top_133m"; + assigned-clocks = <&topckgen 50>; + assigned-clock-parents = <&topckgen 91>; + + phys = <&pciephy>; + phy-names = "pcie-phy"; + + resets = <&infracfg_rst 2>, + <&infracfg_rst 3>; + reset-names = "phy", "mac"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &pcie_intc 0>, + <0 0 0 2 &pcie_intc 1>, + <0 0 0 3 &pcie_intc 2>, + <0 0 0 4 &pcie_intc 3>; + pcie_intc: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt new file mode 100644 index 000000000..684227522 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt @@ -0,0 +1,289 @@ +MediaTek Gen2 PCIe controller + +Required properties: +- compatible: Should contain one of the following strings: + "mediatek,mt2701-pcie" + "mediatek,mt2712-pcie" + "mediatek,mt7622-pcie" + "mediatek,mt7623-pcie" + "mediatek,mt7629-pcie" + "airoha,en7523-pcie" +- device_type: Must be "pci" +- reg: Base addresses and lengths of the root ports. +- reg-names: Names of the above areas to use during resource lookup. +- #address-cells: Address representation for root ports (must be 3) +- #size-cells: Size representation for root ports (must be 2) +- clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names: + Mandatory entries: + - sys_ckN :transaction layer and data link layer clock + Required entries for MT2701/MT7623: + - free_ck :for reference clock of PCIe subsys + Required entries for MT2712/MT7622: + - ahb_ckN :AHB slave interface operating clock for CSR access and RC + initiated MMIO access + Required entries for MT7622: + - axi_ckN :application layer MMIO channel operating clock + - aux_ckN :pe2_mac_bridge and pe2_mac_core operating clock when + pcie_mac_ck/pcie_pipe_ck is turned off + - obff_ckN :OBFF functional block operating clock + - pipe_ckN :LTSSM and PHY/MAC layer operating clock + where N starting from 0 to one less than the number of root ports. +- phys: List of PHY specifiers (used by generic PHY framework). +- phy-names : Must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the + number of PHYs as specified in *phys* property. +- power-domains: A phandle and power domain specifier pair to the power domain + which is responsible for collapsing and restoring power to the peripheral. +- bus-range: Range of bus numbers associated with this controller. +- ranges: Ranges for the PCI memory and I/O regions. + +Required properties for MT7623/MT2701: +- #interrupt-cells: Size representation for interrupts (must be 1) +- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties + Please refer to the standard PCI bus binding document for a more detailed + explanation. +- resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names: Must be "pcie-rst0", "pcie-rst1", "pcie-rstN".. based on the + number of root ports. + +Required properties for MT2712/MT7622/MT7629: +-interrupts: A list of interrupt outputs of the controller, must have one + entry for each PCIe port +- interrupt-names: Must include the following entries: + - "pcie_irq": The interrupt that is asserted when an MSI/INTX is received +- linux,pci-domain: PCI domain ID. Should be unique for each host controller + +In addition, the device tree node must have sub-nodes describing each +PCIe port interface, having the following mandatory properties: + +Required properties: +- device_type: Must be "pci" +- reg: Only the first four bytes are used to refer to the correct bus number + and device number. +- #address-cells: Must be 3 +- #size-cells: Must be 2 +- #interrupt-cells: Must be 1 +- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties + Please refer to the standard PCI bus binding document for a more detailed + explanation. +- ranges: Sub-ranges distributed from the PCIe controller node. An empty + property is sufficient. + +Examples for MT7623: + + hifsys: syscon@1a000000 { + compatible = "mediatek,mt7623-hifsys", + "mediatek,mt2701-hifsys", + "syscon"; + reg = <0 0x1a000000 0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + pcie: pcie@1a140000 { + compatible = "mediatek,mt7623-pcie"; + device_type = "pci"; + reg = <0 0x1a140000 0 0x1000>, /* PCIe shared registers */ + <0 0x1a142000 0 0x1000>, /* Port0 registers */ + <0 0x1a143000 0 0x1000>, /* Port1 registers */ + <0 0x1a144000 0 0x1000>; /* Port2 registers */ + reg-names = "subsys", "port0", "port1", "port2"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 0>; + interrupt-map = <0x0000 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>, + <0x0800 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>, + <0x1000 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_ETHIF_SEL>, + <&hifsys CLK_HIFSYS_PCIE0>, + <&hifsys CLK_HIFSYS_PCIE1>, + <&hifsys CLK_HIFSYS_PCIE2>; + clock-names = "free_ck", "sys_ck0", "sys_ck1", "sys_ck2"; + resets = <&hifsys MT2701_HIFSYS_PCIE0_RST>, + <&hifsys MT2701_HIFSYS_PCIE1_RST>, + <&hifsys MT2701_HIFSYS_PCIE2_RST>; + reset-names = "pcie-rst0", "pcie-rst1", "pcie-rst2"; + phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>, + <&pcie2_phy PHY_TYPE_PCIE>; + phy-names = "pcie-phy0", "pcie-phy1", "pcie-phy2"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>; + bus-range = <0x00 0xff>; + ranges = <0x81000000 0 0x1a160000 0 0x1a160000 0 0x00010000 /* I/O space */ + 0x83000000 0 0x60000000 0 0x60000000 0 0x10000000>; /* memory space */ + + pcie@0,0 { + reg = <0x0000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>; + ranges; + }; + + pcie@1,0 { + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>; + ranges; + }; + + pcie@2,0 { + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>; + ranges; + }; + }; + +Examples for MT2712: + + pcie1: pcie@112ff000 { + compatible = "mediatek,mt2712-pcie"; + device_type = "pci"; + reg = <0 0x112ff000 0 0x1000>; + reg-names = "port1"; + linux,pci-domain = <1>; + #address-cells = <3>; + #size-cells = <2>; + interrupts = ; + interrupt-names = "pcie_irq"; + clocks = <&topckgen CLK_TOP_PE2_MAC_P1_SEL>, + <&pericfg CLK_PERI_PCIE1>; + clock-names = "sys_ck1", "ahb_ck1"; + phys = <&u3port1 PHY_TYPE_PCIE>; + phy-names = "pcie-phy1"; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x11400000 0x0 0x11400000 0 0x300000>; + status = "disabled"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc1 0>, + <0 0 0 2 &pcie_intc1 1>, + <0 0 0 3 &pcie_intc1 2>, + <0 0 0 4 &pcie_intc1 3>; + pcie_intc1: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + + pcie0: pcie@11700000 { + compatible = "mediatek,mt2712-pcie"; + device_type = "pci"; + reg = <0 0x11700000 0 0x1000>; + reg-names = "port0"; + linux,pci-domain = <0>; + #address-cells = <3>; + #size-cells = <2>; + interrupts = ; + interrupt-names = "pcie_irq"; + clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>, + <&pericfg CLK_PERI_PCIE0>; + clock-names = "sys_ck0", "ahb_ck0"; + phys = <&u3port0 PHY_TYPE_PCIE>; + phy-names = "pcie-phy0"; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; + status = "disabled"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc0 0>, + <0 0 0 2 &pcie_intc0 1>, + <0 0 0 3 &pcie_intc0 2>, + <0 0 0 4 &pcie_intc0 3>; + pcie_intc0: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + +Examples for MT7622: + + pcie0: pcie@1a143000 { + compatible = "mediatek,mt7622-pcie"; + device_type = "pci"; + reg = <0 0x1a143000 0 0x1000>; + reg-names = "port0"; + linux,pci-domain = <0>; + #address-cells = <3>; + #size-cells = <2>; + interrupts = ; + interrupt-names = "pcie_irq"; + clocks = <&pciesys CLK_PCIE_P0_MAC_EN>, + <&pciesys CLK_PCIE_P0_AHB_EN>, + <&pciesys CLK_PCIE_P0_AUX_EN>, + <&pciesys CLK_PCIE_P0_AXI_EN>, + <&pciesys CLK_PCIE_P0_OBFF_EN>, + <&pciesys CLK_PCIE_P0_PIPE_EN>; + clock-names = "sys_ck0", "ahb_ck0", "aux_ck0", + "axi_ck0", "obff_ck0", "pipe_ck0"; + + power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x8000000>; + status = "disabled"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc0 0>, + <0 0 0 2 &pcie_intc0 1>, + <0 0 0 3 &pcie_intc0 2>, + <0 0 0 4 &pcie_intc0 3>; + pcie_intc0: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + + pcie1: pcie@1a145000 { + compatible = "mediatek,mt7622-pcie"; + device_type = "pci"; + reg = <0 0x1a145000 0 0x1000>; + reg-names = "port1"; + linux,pci-domain = <1>; + #address-cells = <3>; + #size-cells = <2>; + interrupts = ; + interrupt-names = "pcie_irq"; + clocks = <&pciesys CLK_PCIE_P1_MAC_EN>, + /* designer has connect RC1 with p0_ahb clock */ + <&pciesys CLK_PCIE_P0_AHB_EN>, + <&pciesys CLK_PCIE_P1_AUX_EN>, + <&pciesys CLK_PCIE_P1_AXI_EN>, + <&pciesys CLK_PCIE_P1_OBFF_EN>, + <&pciesys CLK_PCIE_P1_PIPE_EN>; + clock-names = "sys_ck1", "ahb_ck1", "aux_ck1", + "axi_ck1", "obff_ck1", "pipe_ck1"; + + power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x28000000 0x0 0x28000000 0 0x8000000>; + status = "disabled"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc1 0>, + <0 0 0 2 &pcie_intc1 1>, + <0 0 0 3 &pcie_intc1 2>, + <0 0 0 4 &pcie_intc1 3>; + pcie_intc1: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml b/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml new file mode 100644 index 000000000..f7a3c2636 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml @@ -0,0 +1,140 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/microchip,pcie-host.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip PCIe Root Port Bridge Controller + +maintainers: + - Daire McNamara + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + - $ref: /schemas/interrupt-controller/msi-controller.yaml# + +properties: + compatible: + const: microchip,pcie-host-1.0 # PolarFire + + reg: + maxItems: 2 + + reg-names: + items: + - const: cfg + - const: apb + + clocks: + description: + Fabric Interface Controllers, FICs, are the interface between the FPGA + fabric and the core complex on PolarFire SoC. The FICs require two clocks, + one from each side of the interface. The "FIC clocks" described by this + property are on the core complex side & communication through a FIC is not + possible unless it's corresponding clock is enabled. A clock must be + enabled for each of the interfaces the root port is connected through. + This could in theory be all 4 interfaces, one interface or any combination + in between. + minItems: 1 + items: + - description: FIC0's clock + - description: FIC1's clock + - description: FIC2's clock + - description: FIC3's clock + + clock-names: + description: + As any FIC connection combination is possible, the names should match the + order in the clocks property and take the form "ficN" where N is a number + 0-3 + minItems: 1 + maxItems: 4 + items: + pattern: '^fic[0-3]$' + + interrupts: + minItems: 1 + items: + - description: PCIe host controller + - description: builtin MSI controller + + interrupt-names: + minItems: 1 + items: + - const: pcie + - const: msi + + ranges: + maxItems: 1 + + dma-ranges: + minItems: 1 + maxItems: 6 + + msi-controller: + description: Identifies the node as an MSI controller. + + msi-parent: + description: MSI controller the device is capable of using. + + interrupt-controller: + type: object + properties: + '#address-cells': + const: 0 + + '#interrupt-cells': + const: 1 + + interrupt-controller: true + + required: + - '#address-cells' + - '#interrupt-cells' + - interrupt-controller + + additionalProperties: false + +required: + - reg + - reg-names + - "#interrupt-cells" + - interrupts + - interrupt-map-mask + - interrupt-map + - msi-controller + +unevaluatedProperties: false + +examples: + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + pcie0: pcie@2030000000 { + compatible = "microchip,pcie-host-1.0"; + reg = <0x0 0x70000000 0x0 0x08000000>, + <0x0 0x43000000 0x0 0x00010000>; + reg-names = "cfg", "apb"; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupts = <119>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0 0 0 1 &pcie_intc0 0>, + <0 0 0 2 &pcie_intc0 1>, + <0 0 0 3 &pcie_intc0 2>, + <0 0 0 4 &pcie_intc0 3>; + interrupt-parent = <&plic0>; + msi-parent = <&pcie0>; + msi-controller; + bus-range = <0x00 0x7f>; + ranges = <0x03000000 0x0 0x78000000 0x0 0x78000000 0x0 0x04000000>; + pcie_intc0: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/mobiveil-pcie.txt b/Documentation/devicetree/bindings/pci/mobiveil-pcie.txt new file mode 100644 index 000000000..64156993e --- /dev/null +++ b/Documentation/devicetree/bindings/pci/mobiveil-pcie.txt @@ -0,0 +1,72 @@ +* Mobiveil AXI PCIe Root Port Bridge DT description + +Mobiveil's GPEX 4.0 is a PCIe Gen4 root port bridge IP. This configurable IP +has up to 8 outbound and inbound windows for the address translation. + +Required properties: +- #address-cells: Address representation for root ports, set to <3> +- #size-cells: Size representation for root ports, set to <2> +- #interrupt-cells: specifies the number of cells needed to encode an + interrupt source. The value must be 1. +- compatible: Should contain "mbvl,gpex40-pcie" +- reg: Should contain PCIe registers location and length + Mandatory: + "config_axi_slave": PCIe controller registers + "csr_axi_slave" : Bridge config registers + Optional: + "gpio_slave" : GPIO registers to control slot power + "apb_csr" : MSI registers + +- device_type: must be "pci" +- apio-wins : number of requested apio outbound windows + default 2 outbound windows are configured - + 1. Config window + 2. Memory window +- ppio-wins : number of requested ppio inbound windows + default 1 inbound memory window is configured. +- bus-range: PCI bus numbers covered +- interrupt-controller: identifies the node as an interrupt controller +- #interrupt-cells: specifies the number of cells needed to encode an + interrupt source. The value must be 1. +- interrupts: The interrupt line of the PCIe controller + last cell of this field is set to 4 to + denote it as IRQ_TYPE_LEVEL_HIGH type interrupt. +- interrupt-map-mask, + interrupt-map: standard PCI properties to define the mapping of the + PCI interface to interrupt numbers. +- ranges: ranges for the PCI memory regions (I/O space region is not + supported by hardware) + Please refer to the standard PCI bus binding document for a more + detailed explanation + + +Example: +++++++++ + pcie0: pcie@a0000000 { + #address-cells = <3>; + #size-cells = <2>; + compatible = "mbvl,gpex40-pcie"; + reg = <0xa0000000 0x00001000>, + <0xb0000000 0x00010000>, + <0xff000000 0x00200000>, + <0xb0010000 0x00001000>; + reg-names = "config_axi_slave", + "csr_axi_slave", + "gpio_slave", + "apb_csr"; + device_type = "pci"; + apio-wins = <2>; + ppio-wins = <1>; + bus-range = <0x00000000 0x000000ff>; + interrupt-controller; + interrupt-parent = <&gic>; + #interrupt-cells = <1>; + interrupts = < 0 89 4 >; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 0 &pci_express 0>, + <0 0 0 1 &pci_express 1>, + <0 0 0 2 &pci_express 2>, + <0 0 0 3 &pci_express 3>; + ranges = < 0x83000000 0 0x00000000 0xa8000000 0 0x8000000>; + + }; diff --git a/Documentation/devicetree/bindings/pci/mvebu-pci.txt b/Documentation/devicetree/bindings/pci/mvebu-pci.txt new file mode 100644 index 000000000..6d022a9d3 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/mvebu-pci.txt @@ -0,0 +1,310 @@ +* Marvell EBU PCIe interfaces + +Mandatory properties: + +- compatible: one of the following values: + marvell,armada-370-pcie + marvell,armada-xp-pcie + marvell,dove-pcie + marvell,kirkwood-pcie +- #address-cells, set to <3> +- #size-cells, set to <2> +- #interrupt-cells, set to <1> +- bus-range: PCI bus numbers covered +- device_type, set to "pci" +- ranges: ranges describing the MMIO registers to control the PCIe + interfaces, and ranges describing the MBus windows needed to access + the memory and I/O regions of each PCIe interface. +- msi-parent: Link to the hardware entity that serves as the Message + Signaled Interrupt controller for this PCI controller. + +The ranges describing the MMIO registers have the following layout: + + 0x82000000 0 r MBUS_ID(0xf0, 0x01) r 0 s + +where: + + * r is a 32-bits value that gives the offset of the MMIO + registers of this PCIe interface, from the base of the internal + registers. + + * s is a 32-bits value that give the size of this MMIO + registers area. This range entry translates the '0x82000000 0 r' PCI + address into the 'MBUS_ID(0xf0, 0x01) r' CPU address, which is part + of the internal register window (as identified by MBUS_ID(0xf0, + 0x01)). + +The ranges describing the MBus windows have the following layout: + + 0x8t000000 s 0 MBUS_ID(w, a) 0 1 0 + +where: + + * t is the type of the MBus window (as defined by the standard PCI DT + bindings), 1 for I/O and 2 for memory. + + * s is the PCI slot that corresponds to this PCIe interface + + * w is the 'target ID' value for the MBus window + + * a the 'attribute' value for the MBus window. + +Since the location and size of the different MBus windows is not fixed in +hardware, and only determined in runtime, those ranges cover the full first +4 GB of the physical address space, and do not translate into a valid CPU +address. + +In addition, the device tree node must have sub-nodes describing each +PCIe interface, having the following mandatory properties: + +- reg: used only for interrupt mapping, so only the first four bytes + are used to refer to the correct bus number and device number. +- assigned-addresses: reference to the MMIO registers used to control + this PCIe interface. +- clocks: the clock associated to this PCIe interface +- marvell,pcie-port: the physical PCIe port number +- status: either "disabled" or "okay" +- device_type, set to "pci" +- #address-cells, set to <3> +- #size-cells, set to <2> +- #interrupt-cells, set to <1> +- ranges, translating the MBus windows ranges of the parent node into + standard PCI addresses. +- interrupt-map-mask and interrupt-map, standard PCI properties to + define the mapping of the PCIe interface to interrupt numbers. + +and the following optional properties: +- marvell,pcie-lane: the physical PCIe lane number, for ports having + multiple lanes. If this property is not found, we assume that the + value is 0. +- num-lanes: number of SerDes PCIe lanes for this link (1 or 4) +- reset-gpios: optional GPIO to PERST# +- reset-delay-us: delay in us to wait after reset de-assertion, if not + specified will default to 100ms, as required by the PCIe specification. +- interrupt-names: list of interrupt names, supported are: + - "intx" - interrupt line triggered by one of the legacy interrupt +- interrupts or interrupts-extended: List of the interrupt sources which + corresponding to the "interrupt-names". If non-empty then also additional + 'interrupt-controller' subnode must be defined. + +Example: + +pcie-controller { + compatible = "marvell,armada-xp-pcie"; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + + bus-range = <0x00 0xff>; + msi-parent = <&mpic>; + + ranges = + <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */ + 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */ + 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */ + 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */ + 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */ + 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */ + 0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000 /* Port 3.0 registers */ + 0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000 /* Port 1.1 registers */ + 0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000 /* Port 1.2 registers */ + 0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000 /* Port 1.3 registers */ + 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ + 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ + 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */ + 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO */ + 0x82000000 0x3 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */ + 0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */ + 0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */ + 0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */ + + 0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ + 0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */ + 0x82000000 0x6 0 MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */ + 0x81000000 0x6 0 MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO */ + 0x82000000 0x7 0 MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */ + 0x81000000 0x7 0 MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO */ + 0x82000000 0x8 0 MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */ + 0x81000000 0x8 0 MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO */ + + 0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */ + 0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */ + + 0x82000000 0xa 0 MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */ + 0x81000000 0xa 0 MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO */>; + + pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 + 0x81000000 0 0 0x81000000 0x1 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 58>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + num-lanes = <1>; + /* low-active PERST# reset on GPIO 25 */ + reset-gpios = <&gpio0 25 1>; + /* wait 20ms for device settle after reset deassertion */ + reset-delay-us = <20000>; + clocks = <&gateclk 5>; + }; + + pcie@2,0 { + device_type = "pci"; + assigned-addresses = <0x82001000 0 0x44000 0 0x2000>; + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 + 0x81000000 0 0 0x81000000 0x2 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 59>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <1>; + num-lanes = <1>; + clocks = <&gateclk 6>; + }; + + pcie@3,0 { + device_type = "pci"; + assigned-addresses = <0x82001800 0 0x48000 0 0x2000>; + reg = <0x1800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 + 0x81000000 0 0 0x81000000 0x3 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 60>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <2>; + num-lanes = <1>; + clocks = <&gateclk 7>; + }; + + pcie@4,0 { + device_type = "pci"; + assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>; + reg = <0x2000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 + 0x81000000 0 0 0x81000000 0x4 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 61>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <3>; + num-lanes = <1>; + clocks = <&gateclk 8>; + }; + + pcie@5,0 { + device_type = "pci"; + assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; + reg = <0x2800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0 + 0x81000000 0 0 0x81000000 0x5 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 62>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <0>; + num-lanes = <1>; + clocks = <&gateclk 9>; + }; + + pcie@6,0 { + device_type = "pci"; + assigned-addresses = <0x82003000 0 0x84000 0 0x2000>; + reg = <0x3000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0 + 0x81000000 0 0 0x81000000 0x6 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 63>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <1>; + num-lanes = <1>; + clocks = <&gateclk 10>; + }; + + pcie@7,0 { + device_type = "pci"; + assigned-addresses = <0x82003800 0 0x88000 0 0x2000>; + reg = <0x3800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0 + 0x81000000 0 0 0x81000000 0x7 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 64>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <2>; + num-lanes = <1>; + clocks = <&gateclk 11>; + }; + + pcie@8,0 { + device_type = "pci"; + assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>; + reg = <0x4000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0 + 0x81000000 0 0 0x81000000 0x8 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 65>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <3>; + num-lanes = <1>; + clocks = <&gateclk 12>; + }; + + pcie@9,0 { + device_type = "pci"; + assigned-addresses = <0x82004800 0 0x42000 0 0x2000>; + reg = <0x4800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0 + 0x81000000 0 0 0x81000000 0x9 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 99>; + marvell,pcie-port = <2>; + marvell,pcie-lane = <0>; + num-lanes = <1>; + clocks = <&gateclk 26>; + }; + + pcie@a,0 { + device_type = "pci"; + assigned-addresses = <0x82005000 0 0x82000 0 0x2000>; + reg = <0x5000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0 + 0x81000000 0 0 0x81000000 0xa 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 103>; + marvell,pcie-port = <3>; + marvell,pcie-lane = <0>; + num-lanes = <1>; + clocks = <&gateclk 27>; + }; +}; diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie-ep.yaml new file mode 100644 index 000000000..a24fb8307 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie-ep.yaml @@ -0,0 +1,319 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/nvidia,tegra194-pcie-ep.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra194 (and later) PCIe Endpoint controller (Synopsys DesignWare Core based) + +maintainers: + - Thierry Reding + - Jon Hunter + - Vidya Sagar + +description: | + This PCIe controller is based on the Synopsys DesignWare PCIe IP and thus + inherits all the common properties defined in snps,dw-pcie-ep.yaml. Some + of the controller instances are dual mode; they can work either in Root + Port mode or Endpoint mode but one at a time. + + On Tegra194, controllers C0, C4 and C5 support Endpoint mode. + On Tegra234, controllers C5, C6, C7 and C10 support Endpoint mode. + + Note: On Tegra194's P2972-0000 platform, only C5 controller can be enabled to + operate in the Endpoint mode because of the way the platform is designed. + +properties: + compatible: + enum: + - nvidia,tegra194-pcie-ep + - nvidia,tegra234-pcie-ep + + reg: + items: + - description: controller's application logic registers + - description: iATU and DMA registers. This is where the iATU (internal + Address Translation Unit) registers of the PCIe core are made + available for software access. + - description: aperture where the Root Port's own configuration + registers are available. + - description: aperture used to map the remote Root Complex address space + + reg-names: + items: + - const: appl + - const: atu_dma + - const: dbi + - const: addr_space + + interrupts: + items: + - description: controller interrupt + + interrupt-names: + items: + - const: intr + + clocks: + items: + - description: module clock + + clock-names: + items: + - const: core + + resets: + items: + - description: APB bus interface reset + - description: module reset + + reset-names: + items: + - const: apb + - const: core + + reset-gpios: + description: Must contain a phandle to a GPIO controller followed by GPIO + that is being used as PERST input signal. Please refer to pci.txt. + + phys: + minItems: 1 + maxItems: 8 + + phy-names: + minItems: 1 + items: + - const: p2u-0 + - const: p2u-1 + - const: p2u-2 + - const: p2u-3 + - const: p2u-4 + - const: p2u-5 + - const: p2u-6 + - const: p2u-7 + + power-domains: + maxItems: 1 + description: | + A phandle to the node that controls power to the respective PCIe + controller and a specifier name for the PCIe controller. + + Tegra194 specifiers are defined in "include/dt-bindings/power/tegra194-powergate.h" + Tegra234 specifiers are defined in "include/dt-bindings/power/tegra234-powergate.h" + + interconnects: + items: + - description: memory read client + - description: memory write client + + interconnect-names: + items: + - const: dma-mem # read + - const: write + + dma-coherent: true + + nvidia,bpmp: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: | + Must contain a pair of phandles to BPMP controller node followed by + controller ID. Following are the controller IDs for each controller: + + Tegra194 + + 0: C0 + 1: C1 + 2: C2 + 3: C3 + 4: C4 + 5: C5 + + Tegra234 + + 0 : C0 + 1 : C1 + 2 : C2 + 3 : C3 + 4 : C4 + 5 : C5 + 6 : C6 + 7 : C7 + 8 : C8 + 9 : C9 + 10: C10 + + items: + - items: + - description: phandle to BPMP controller node + - description: PCIe controller ID + maximum: 10 + + nvidia,aspm-cmrt-us: + description: Common Mode Restore Time for proper operation of ASPM to be + specified in microseconds + + nvidia,aspm-pwr-on-t-us: + description: Power On time for proper operation of ASPM to be specified in + microseconds + + nvidia,aspm-l0s-entrance-latency-us: + description: ASPM L0s entrance latency to be specified in microseconds + + vddio-pex-ctl-supply: + description: A phandle to the regulator supply for PCIe side band signals + + nvidia,refclk-select-gpios: + maxItems: 1 + description: GPIO used to enable REFCLK to controller from the host + + nvidia,enable-ext-refclk: + description: | + This boolean property needs to be present if the controller is configured + to receive Reference Clock from the host. + NOTE: This is applicable only for Tegra234. + + $ref: /schemas/types.yaml#/definitions/flag + + nvidia,enable-srns: + description: | + This boolean property needs to be present if the controller is + configured to operate in SRNS (Separate Reference Clocks with No + Spread-Spectrum Clocking). NOTE: This is applicable only for + Tegra234. + + $ref: /schemas/types.yaml#/definitions/flag + +allOf: + - $ref: /schemas/pci/snps,dw-pcie-ep.yaml# + +unevaluatedProperties: false + +required: + - interrupts + - interrupt-names + - clocks + - clock-names + - resets + - reset-names + - power-domains + - reset-gpios + - vddio-pex-ctl-supply + - num-lanes + - phys + - phy-names + - nvidia,bpmp + +examples: + - | + #include + #include + #include + #include + #include + + bus@0 { + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x8 0x0>; + + pcie-ep@141a0000 { + compatible = "nvidia,tegra194-pcie-ep"; + reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x3a080000 0x0 0x00040000>, /* DBI reg space (256K) */ + <0x1c 0x00000000 0x4 0x00000000>; /* Address Space (16G) */ + reg-names = "appl", "atu_dma", "dbi", "addr_space"; + interrupts = ; /* controller interrupt */ + interrupt-names = "intr"; + + clocks = <&bpmp TEGRA194_CLK_PEX1_CORE_5>; + clock-names = "core"; + + resets = <&bpmp TEGRA194_RESET_PEX1_CORE_5_APB>, + <&bpmp TEGRA194_RESET_PEX1_CORE_5>; + reset-names = "apb", "core"; + + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>; + pinctrl-names = "default"; + pinctrl-0 = <&clkreq_c5_bi_dir_state>; + + nvidia,bpmp = <&bpmp 5>; + + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + vddio-pex-ctl-supply = <&vdd_1v8ao>; + + reset-gpios = <&gpio TEGRA194_MAIN_GPIO(GG, 1) GPIO_ACTIVE_LOW>; + + nvidia,refclk-select-gpios = <&gpio_aon TEGRA194_AON_GPIO(AA, 5) + GPIO_ACTIVE_HIGH>; + + num-lanes = <8>; + + phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>, + <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>, + <&p2u_nvhs_6>, <&p2u_nvhs_7>; + + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4", + "p2u-5", "p2u-6", "p2u-7"; + }; + }; + + - | + #include + #include + #include + #include + #include + + bus@0 { + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x8 0x0>; + + pcie-ep@141a0000 { + compatible = "nvidia,tegra234-pcie-ep"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX8A>; + reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x3a080000 0x0 0x00040000>, /* DBI reg space (256K) */ + <0x27 0x40000000 0x4 0x00000000>; /* Address Space (16G) */ + reg-names = "appl", "atu_dma", "dbi", "addr_space"; + + interrupts = ; /* controller interrupt */ + interrupt-names = "intr"; + + clocks = <&bpmp TEGRA234_CLK_PEX1_C5_CORE>; + clock-names = "core"; + + resets = <&bpmp TEGRA234_RESET_PEX1_CORE_5_APB>, + <&bpmp TEGRA234_RESET_PEX1_CORE_5>; + reset-names = "apb", "core"; + + nvidia,bpmp = <&bpmp 5>; + + nvidia,enable-ext-refclk; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + vddio-pex-ctl-supply = <&p3701_vdd_1v8_ls>; + + reset-gpios = <&gpio TEGRA234_MAIN_GPIO(AF, 1) GPIO_ACTIVE_LOW>; + + nvidia,refclk-select-gpios = <&gpio_aon + TEGRA234_AON_GPIO(AA, 4) + GPIO_ACTIVE_HIGH>; + + num-lanes = <8>; + + phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>, + <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>, + <&p2u_nvhs_6>, <&p2u_nvhs_7>; + + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4", + "p2u-5", "p2u-6", "p2u-7"; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.yaml b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.yaml new file mode 100644 index 000000000..75da3e8ee --- /dev/null +++ b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.yaml @@ -0,0 +1,350 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/nvidia,tegra194-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra194 (and later) PCIe controller (Synopsys DesignWare Core based) + +maintainers: + - Thierry Reding + - Jon Hunter + - Vidya Sagar + +description: | + This PCIe controller is based on the Synopsys DesignWare PCIe IP and thus + inherits all the common properties defined in snps,dw-pcie.yaml. Some of + the controller instances are dual mode where in they can work either in + Root Port mode or Endpoint mode but one at a time. + + See nvidia,tegra194-pcie-ep.yaml for details on the Endpoint mode device + tree bindings. + +properties: + compatible: + enum: + - nvidia,tegra194-pcie + - nvidia,tegra234-pcie + + reg: + items: + - description: controller's application logic registers + - description: configuration registers + - description: iATU and DMA registers. This is where the iATU (internal + Address Translation Unit) registers of the PCIe core are made + available for software access. + - description: aperture where the Root Port's own configuration + registers are available. + + reg-names: + items: + - const: appl + - const: config + - const: atu_dma + - const: dbi + + interrupts: + items: + - description: controller interrupt + - description: MSI interrupt + + interrupt-names: + items: + - const: intr + - const: msi + + clocks: + items: + - description: module clock + + clock-names: + items: + - const: core + + resets: + items: + - description: APB bus interface reset + - description: module reset + + reset-names: + items: + - const: apb + - const: core + + phys: + minItems: 1 + maxItems: 8 + + phy-names: + minItems: 1 + items: + - const: p2u-0 + - const: p2u-1 + - const: p2u-2 + - const: p2u-3 + - const: p2u-4 + - const: p2u-5 + - const: p2u-6 + - const: p2u-7 + + power-domains: + maxItems: 1 + description: | + A phandle to the node that controls power to the respective PCIe + controller and a specifier name for the PCIe controller. + + Tegra194 specifiers defined in "include/dt-bindings/power/tegra194-powergate.h" + Tegra234 specifiers defined in "include/dt-bindings/power/tegra234-powergate.h" + + interconnects: + items: + - description: memory read client + - description: memory write client + + interconnect-names: + items: + - const: dma-mem # read + - const: write + + dma-coherent: true + + nvidia,bpmp: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: | + Must contain a pair of phandles to BPMP controller node followed by + controller ID. Following are the controller IDs for each controller: + + Tegra194 + + 0: C0 + 1: C1 + 2: C2 + 3: C3 + 4: C4 + 5: C5 + + Tegra234 + + 0 : C0 + 1 : C1 + 2 : C2 + 3 : C3 + 4 : C4 + 5 : C5 + 6 : C6 + 7 : C7 + 8 : C8 + 9 : C9 + 10: C10 + + items: + - items: + - description: phandle to BPMP controller node + - description: PCIe controller ID + maximum: 10 + + nvidia,update-fc-fixup: + description: | + This is a boolean property and needs to be present to improve performance + when a platform is designed in such a way that it satisfies at least one + of the following conditions thereby enabling Root Port to exchange + optimum number of FC (Flow Control) credits with downstream devices: + + NOTE: This is applicable only for Tegra194. + + 1. If C0/C4/C5 run at x1/x2 link widths (irrespective of speed and MPS) + 2. If C0/C1/C2/C3/C4/C5 operate at their respective max link widths and + a) speed is Gen-2 and MPS is 256B + b) speed is >= Gen-3 with any MPS + + $ref: /schemas/types.yaml#/definitions/flag + + nvidia,aspm-cmrt-us: + description: Common Mode Restore Time for proper operation of ASPM to be + specified in microseconds + + nvidia,aspm-pwr-on-t-us: + description: Power On time for proper operation of ASPM to be specified in + microseconds + + nvidia,aspm-l0s-entrance-latency-us: + description: ASPM L0s entrance latency to be specified in microseconds + + vddio-pex-ctl-supply: + description: A phandle to the regulator supply for PCIe side band signals. + + vpcie3v3-supply: + description: A phandle to the regulator node that supplies 3.3V to the slot + if the platform has one such slot, e.g., x16 slot owned by C5 controller + in p2972-0000 platform. + + vpcie12v-supply: + description: A phandle to the regulator node that supplies 12V to the slot + if the platform has one such slot, e.g., x16 slot owned by C5 controller + in p2972-0000 platform. + + nvidia,enable-srns: + description: | + This boolean property needs to be present if the controller is + configured to operate in SRNS (Separate Reference Clocks with No + Spread-Spectrum Clocking). NOTE: This is applicable only for + Tegra234. + + $ref: /schemas/types.yaml#/definitions/flag + + nvidia,enable-ext-refclk: + description: | + This boolean property needs to be present if the controller is + configured to use the reference clocking coming in from an external + clock source instead of using the internal clock source. + + $ref: /schemas/types.yaml#/definitions/flag + +allOf: + - $ref: /schemas/pci/snps,dw-pcie.yaml# + +unevaluatedProperties: false + +required: + - interrupts + - interrupt-names + - interrupt-map + - interrupt-map-mask + - clocks + - clock-names + - resets + - reset-names + - power-domains + - vddio-pex-ctl-supply + - num-lanes + - phys + - phy-names + - nvidia,bpmp + +examples: + - | + #include + #include + #include + #include + + bus@0 { + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x8 0x0>; + + pcie@14180000 { + compatible = "nvidia,tegra194-pcie"; + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>; + reg = <0x0 0x14180000 0x0 0x00020000>, /* appl registers (128K) */ + <0x0 0x38000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x0 0x38040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x0 0x38080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg-names = "appl", "config", "atu_dma", "dbi"; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <8>; + linux,pci-domain = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&pex_rst_c5_out_state>, <&clkreq_c5_bi_dir_state>; + + clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_0>; + clock-names = "core"; + + resets = <&bpmp TEGRA194_RESET_PEX0_CORE_0_APB>, + <&bpmp TEGRA194_RESET_PEX0_CORE_0>; + reset-names = "apb", "core"; + + interrupts = , /* controller interrupt */ + ; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + + nvidia,bpmp = <&bpmp 0>; + + supports-clkreq; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x38100000 0x0 0x38100000 0x0 0x00100000>, /* downstream I/O */ + <0x82000000 0x0 0x38200000 0x0 0x38200000 0x0 0x01e00000>, /* non-prefetch memory */ + <0xc2000000 0x18 0x00000000 0x18 0x00000000 0x4 0x00000000>; /* prefetchable memory */ + + vddio-pex-ctl-supply = <&vdd_1v8ao>; + vpcie3v3-supply = <&vdd_3v3_pcie>; + vpcie12v-supply = <&vdd_12v_pcie>; + + phys = <&p2u_hsio_2>, <&p2u_hsio_3>, <&p2u_hsio_4>, + <&p2u_hsio_5>; + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3"; + }; + }; + + - | + #include + #include + #include + #include + + bus@0 { + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x8 0x0>; + + pcie@14160000 { + compatible = "nvidia,tegra234-pcie"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4BB>; + reg = <0x00 0x14160000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x36000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x36040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x36080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg-names = "appl", "config", "atu_dma", "dbi"; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <4>; + num-viewport = <8>; + linux,pci-domain = <4>; + + clocks = <&bpmp TEGRA234_CLK_PEX0_C4_CORE>; + clock-names = "core"; + + resets = <&bpmp TEGRA234_RESET_PEX0_CORE_4_APB>, + <&bpmp TEGRA234_RESET_PEX0_CORE_4>; + reset-names = "apb", "core"; + + interrupts = , /* controller interrupt */ + ; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + + nvidia,bpmp = <&bpmp 4>; + + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + bus-range = <0x0 0xff>; + ranges = <0x43000000 0x21 0x40000000 0x21 0x40000000 0x2 0xe8000000>, /* prefetchable */ + <0x02000000 0x0 0x40000000 0x24 0x28000000 0x0 0x08000000>, /* non-prefetchable */ + <0x01000000 0x0 0x36100000 0x00 0x36100000 0x0 0x00100000>; /* downstream I/O */ + + vddio-pex-ctl-supply = <&p3701_vdd_AO_1v8>; + + phys = <&p2u_hsio_4>, <&p2u_hsio_5>, <&p2u_hsio_6>, + <&p2u_hsio_7>; + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3"; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt new file mode 100644 index 000000000..d099f3476 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt @@ -0,0 +1,670 @@ +NVIDIA Tegra PCIe controller + +Required properties: +- compatible: Must be: + - "nvidia,tegra20-pcie": for Tegra20 + - "nvidia,tegra30-pcie": for Tegra30 + - "nvidia,tegra124-pcie": for Tegra124 and Tegra132 + - "nvidia,tegra210-pcie": for Tegra210 + - "nvidia,tegra186-pcie": for Tegra186 +- power-domains: To ungate power partition by BPMP powergate driver. Must + contain BPMP phandle and PCIe power partition ID. This is required only + for Tegra186. +- device_type: Must be "pci" +- reg: A list of physical base address and length for each set of controller + registers. Must contain an entry for each entry in the reg-names property. +- reg-names: Must include the following entries: + "pads": PADS registers + "afi": AFI registers + "cs": configuration space region +- interrupts: A list of interrupt outputs of the controller. Must contain an + entry for each entry in the interrupt-names property. +- interrupt-names: Must include the following entries: + "intr": The Tegra interrupt that is asserted for controller interrupts + "msi": The Tegra interrupt that is asserted when an MSI is received +- bus-range: Range of bus numbers associated with this controller +- #address-cells: Address representation for root ports (must be 3) + - cell 0 specifies the bus and device numbers of the root port: + [23:16]: bus number + [15:11]: device number + - cell 1 denotes the upper 32 address bits and should be 0 + - cell 2 contains the lower 32 address bits and is used to translate to the + CPU address space +- #size-cells: Size representation for root ports (must be 2) +- ranges: Describes the translation of addresses for root ports and standard + PCI regions. The entries must be 6 cells each, where the first three cells + correspond to the address as described for the #address-cells property + above, the fourth cell is the physical CPU address to translate to and the + fifth and six cells are as described for the #size-cells property above. + - The first two entries are expected to translate the addresses for the root + port registers, which are referenced by the assigned-addresses property of + the root port nodes (see below). + - The remaining entries setup the mapping for the standard I/O, memory and + prefetchable PCI regions. The first cell determines the type of region + that is setup: + - 0x81000000: I/O memory region + - 0x82000000: non-prefetchable memory region + - 0xc2000000: prefetchable memory region + Please refer to the standard PCI bus binding document for a more detailed + explanation. +- #interrupt-cells: Size representation for interrupts (must be 1) +- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties + Please refer to the standard PCI bus binding document for a more detailed + explanation. +- clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names: Must include the following entries: + - pex + - afi + - pll_e + - cml (not required for Tegra20) +- resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names: Must include the following entries: + - pex + - afi + - pcie_x + +Optional properties: +- pinctrl-names: A list of pinctrl state names. Must contain the following + entries: + - "default": active state, puts PCIe I/O out of deep power down state + - "idle": puts PCIe I/O into deep power down state +- pinctrl-0: phandle for the default/active state of pin configurations. +- pinctrl-1: phandle for the idle state of pin configurations. + +Required properties on Tegra124 and later (deprecated): +- phys: Must contain an entry for each entry in phy-names. +- phy-names: Must include the following entries: + - pcie + +These properties are deprecated in favour of per-lane PHYs define in each of +the root ports (see below). + +Power supplies for Tegra20: +- avdd-pex-supply: Power supply for analog PCIe logic. Must supply 1.05 V. +- vdd-pex-supply: Power supply for digital PCIe I/O. Must supply 1.05 V. +- avdd-pex-pll-supply: Power supply for dedicated (internal) PCIe PLL. Must + supply 1.05 V. +- avdd-plle-supply: Power supply for PLLE, which is shared with SATA. Must + supply 1.05 V. +- vddio-pex-clk-supply: Power supply for PCIe clock. Must supply 3.3 V. + +Power supplies for Tegra30: +- Required: + - avdd-pex-pll-supply: Power supply for dedicated (internal) PCIe PLL. Must + supply 1.05 V. + - avdd-plle-supply: Power supply for PLLE, which is shared with SATA. Must + supply 1.05 V. + - vddio-pex-ctl-supply: Power supply for PCIe control I/O partition. Must + supply 1.8 V. + - hvdd-pex-supply: High-voltage supply for PCIe I/O and PCIe output clocks. + Must supply 3.3 V. +- Optional: + - If lanes 0 to 3 are used: + - avdd-pexa-supply: Power supply for analog PCIe logic. Must supply 1.05 V. + - vdd-pexa-supply: Power supply for digital PCIe I/O. Must supply 1.05 V. + - If lanes 4 or 5 are used: + - avdd-pexb-supply: Power supply for analog PCIe logic. Must supply 1.05 V. + - vdd-pexb-supply: Power supply for digital PCIe I/O. Must supply 1.05 V. + +Power supplies for Tegra124: +- Required: + - avddio-pex-supply: Power supply for analog PCIe logic. Must supply 1.05 V. + - dvddio-pex-supply: Power supply for digital PCIe I/O. Must supply 1.05 V. + - hvdd-pex-supply: High-voltage supply for PCIe I/O and PCIe output clocks. + Must supply 3.3 V. + - vddio-pex-ctl-supply: Power supply for PCIe control I/O partition. Must + supply 2.8-3.3 V. + +Power supplies for Tegra210: +- Required: + - hvddio-pex-supply: High-voltage supply for PCIe I/O and PCIe output + clocks. Must supply 1.8 V. + - dvddio-pex-supply: Power supply for digital PCIe I/O. Must supply 1.05 V. + - vddio-pex-ctl-supply: Power supply for PCIe control I/O partition. Must + supply 1.8 V. + +Power supplies for Tegra186: +- Required: + - dvdd-pex-supply: Power supply for digital PCIe I/O. Must supply 1.05 V. + - hvdd-pex-pll-supply: High-voltage supply for PLLE (shared with USB3). Must + supply 1.8 V. + - hvdd-pex-supply: High-voltage supply for PCIe I/O and PCIe output clocks. + Must supply 1.8 V. + - vddio-pexctl-aud-supply: Power supply for PCIe side band signals. Must + supply 1.8 V. + +Root ports are defined as subnodes of the PCIe controller node. + +Required properties: +- device_type: Must be "pci" +- assigned-addresses: Address and size of the port configuration registers +- reg: PCI bus address of the root port +- #address-cells: Must be 3 +- #size-cells: Must be 2 +- ranges: Sub-ranges distributed from the PCIe controller node. An empty + property is sufficient. +- nvidia,num-lanes: Number of lanes to use for this port. Valid combinations + are: + - Root port 0 uses 4 lanes, root port 1 is unused. + - Both root ports use 2 lanes. + +Required properties for Tegra124 and later: +- phys: Must contain an phandle to a PHY for each entry in phy-names. +- phy-names: Must include an entry for each active lane. Note that the number + of entries does not have to (though usually will) be equal to the specified + number of lanes in the nvidia,num-lanes property. Entries are of the form + "pcie-N": where N ranges from 0 to the value specified in nvidia,num-lanes. + +Examples: +========= + +Tegra20: +-------- + +SoC DTSI: + + pcie-controller@80003000 { + compatible = "nvidia,tegra20-pcie"; + device_type = "pci"; + reg = <0x80003000 0x00000800 /* PADS registers */ + 0x80003800 0x00000200 /* AFI registers */ + 0x90000000 0x10000000>; /* configuration space */ + reg-names = "pads", "afi", "cs"; + interrupts = <0 98 0x04 /* controller interrupt */ + 0 99 0x04>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &intc GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + + bus-range = <0x00 0xff>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x82000000 0 0x80000000 0x80000000 0 0x00001000 /* port 0 registers */ + 0x82000000 0 0x80001000 0x80001000 0 0x00001000 /* port 1 registers */ + 0x81000000 0 0 0x82000000 0 0x00010000 /* downstream I/O */ + 0x82000000 0 0xa0000000 0xa0000000 0 0x10000000 /* non-prefetchable memory */ + 0xc2000000 0 0xb0000000 0xb0000000 0 0x10000000>; /* prefetchable memory */ + + clocks = <&tegra_car 70>, <&tegra_car 72>, <&tegra_car 118>; + clock-names = "pex", "afi", "pll_e"; + resets = <&tegra_car 70>, <&tegra_car 72>, <&tegra_car 74>; + reset-names = "pex", "afi", "pcie_x"; + status = "disabled"; + + pci@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x80000000 0 0x1000>; + reg = <0x000800 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + + ranges; + + nvidia,num-lanes = <2>; + }; + + pci@2,0 { + device_type = "pci"; + assigned-addresses = <0x82001000 0 0x80001000 0 0x1000>; + reg = <0x001000 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + + ranges; + + nvidia,num-lanes = <2>; + }; + }; + +Board DTS: + + pcie-controller@80003000 { + status = "okay"; + + vdd-supply = <&pci_vdd_reg>; + pex-clk-supply = <&pci_clk_reg>; + + /* root port 00:01.0 */ + pci@1,0 { + status = "okay"; + + /* bridge 01:00.0 (optional) */ + pci@0,0 { + reg = <0x010000 0 0 0 0>; + + #address-cells = <3>; + #size-cells = <2>; + + device_type = "pci"; + + /* endpoint 02:00.0 */ + pci@0,0 { + reg = <0x020000 0 0 0 0>; + }; + }; + }; + }; + +Note that devices on the PCI bus are dynamically discovered using PCI's bus +enumeration and therefore don't need corresponding device nodes in DT. However +if a device on the PCI bus provides a non-probeable bus such as I2C or SPI, +device nodes need to be added in order to allow the bus' children to be +instantiated at the proper location in the operating system's device tree (as +illustrated by the optional nodes in the example above). + +Tegra30: +-------- + +SoC DTSI: + + pcie-controller@3000 { + compatible = "nvidia,tegra30-pcie"; + device_type = "pci"; + reg = <0x00003000 0x00000800 /* PADS registers */ + 0x00003800 0x00000200 /* AFI registers */ + 0x10000000 0x10000000>; /* configuration space */ + reg-names = "pads", "afi", "cs"; + interrupts = ; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &intc GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + + bus-range = <0x00 0xff>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x82000000 0 0x00000000 0x00000000 0 0x00001000 /* port 0 configuration space */ + 0x82000000 0 0x00001000 0x00001000 0 0x00001000 /* port 1 configuration space */ + 0x82000000 0 0x00004000 0x00004000 0 0x00001000 /* port 2 configuration space */ + 0x81000000 0 0 0x02000000 0 0x00010000 /* downstream I/O */ + 0x82000000 0 0x20000000 0x20000000 0 0x08000000 /* non-prefetchable memory */ + 0xc2000000 0 0x28000000 0x28000000 0 0x18000000>; /* prefetchable memory */ + + clocks = <&tegra_car TEGRA30_CLK_PCIE>, + <&tegra_car TEGRA30_CLK_AFI>, + <&tegra_car TEGRA30_CLK_PLL_E>, + <&tegra_car TEGRA30_CLK_CML0>; + clock-names = "pex", "afi", "pll_e", "cml"; + resets = <&tegra_car 70>, + <&tegra_car 72>, + <&tegra_car 74>; + reset-names = "pex", "afi", "pcie_x"; + status = "disabled"; + + pci@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x00000000 0 0x1000>; + reg = <0x000800 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <2>; + }; + + pci@2,0 { + device_type = "pci"; + assigned-addresses = <0x82001000 0 0x00001000 0 0x1000>; + reg = <0x001000 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <2>; + }; + + pci@3,0 { + device_type = "pci"; + assigned-addresses = <0x82001800 0 0x00004000 0 0x1000>; + reg = <0x001800 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <2>; + }; + }; + +Board DTS: + + pcie-controller@3000 { + status = "okay"; + + avdd-pexa-supply = <&ldo1_reg>; + vdd-pexa-supply = <&ldo1_reg>; + avdd-pexb-supply = <&ldo1_reg>; + vdd-pexb-supply = <&ldo1_reg>; + avdd-pex-pll-supply = <&ldo1_reg>; + avdd-plle-supply = <&ldo1_reg>; + vddio-pex-ctl-supply = <&sys_3v3_reg>; + hvdd-pex-supply = <&sys_3v3_pexs_reg>; + + pci@1,0 { + status = "okay"; + }; + + pci@3,0 { + status = "okay"; + }; + }; + +Tegra124: +--------- + +SoC DTSI: + + pcie-controller@1003000 { + compatible = "nvidia,tegra124-pcie"; + device_type = "pci"; + reg = <0x0 0x01003000 0x0 0x00000800 /* PADS registers */ + 0x0 0x01003800 0x0 0x00000800 /* AFI registers */ + 0x0 0x02000000 0x0 0x10000000>; /* configuration space */ + reg-names = "pads", "afi", "cs"; + interrupts = , /* controller interrupt */ + ; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + + bus-range = <0x00 0xff>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x82000000 0 0x01000000 0x0 0x01000000 0 0x00001000 /* port 0 configuration space */ + 0x82000000 0 0x01001000 0x0 0x01001000 0 0x00001000 /* port 1 configuration space */ + 0x81000000 0 0x0 0x0 0x12000000 0 0x00010000 /* downstream I/O (64 KiB) */ + 0x82000000 0 0x13000000 0x0 0x13000000 0 0x0d000000 /* non-prefetchable memory (208 MiB) */ + 0xc2000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */ + + clocks = <&tegra_car TEGRA124_CLK_PCIE>, + <&tegra_car TEGRA124_CLK_AFI>, + <&tegra_car TEGRA124_CLK_PLL_E>, + <&tegra_car TEGRA124_CLK_CML0>; + clock-names = "pex", "afi", "pll_e", "cml"; + resets = <&tegra_car 70>, + <&tegra_car 72>, + <&tegra_car 74>; + reset-names = "pex", "afi", "pcie_x"; + status = "disabled"; + + pci@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>; + reg = <0x000800 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <2>; + }; + + pci@2,0 { + device_type = "pci"; + assigned-addresses = <0x82001000 0 0x01001000 0 0x1000>; + reg = <0x001000 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <1>; + }; + }; + +Board DTS: + + pcie-controller@1003000 { + status = "okay"; + + avddio-pex-supply = <&vdd_1v05_run>; + dvddio-pex-supply = <&vdd_1v05_run>; + avdd-pex-pll-supply = <&vdd_1v05_run>; + hvdd-pex-supply = <&vdd_3v3_lp0>; + hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>; + vddio-pex-ctl-supply = <&vdd_3v3_lp0>; + avdd-pll-erefe-supply = <&avdd_1v05_run>; + + /* Mini PCIe */ + pci@1,0 { + phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-4}>; + phy-names = "pcie-0"; + status = "okay"; + }; + + /* Gigabit Ethernet */ + pci@2,0 { + phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>; + phy-names = "pcie-0"; + status = "okay"; + }; + }; + +Tegra210: +--------- + +SoC DTSI: + + pcie-controller@1003000 { + compatible = "nvidia,tegra210-pcie"; + device_type = "pci"; + reg = <0x0 0x01003000 0x0 0x00000800 /* PADS registers */ + 0x0 0x01003800 0x0 0x00000800 /* AFI registers */ + 0x0 0x02000000 0x0 0x10000000>; /* configuration space */ + reg-names = "pads", "afi", "cs"; + interrupts = , /* controller interrupt */ + ; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + + bus-range = <0x00 0xff>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x82000000 0 0x01000000 0x0 0x01000000 0 0x00001000 /* port 0 configuration space */ + 0x82000000 0 0x01001000 0x0 0x01001000 0 0x00001000 /* port 1 configuration space */ + 0x81000000 0 0x0 0x0 0x12000000 0 0x00010000 /* downstream I/O (64 KiB) */ + 0x82000000 0 0x13000000 0x0 0x13000000 0 0x0d000000 /* non-prefetchable memory (208 MiB) */ + 0xc2000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */ + + clocks = <&tegra_car TEGRA210_CLK_PCIE>, + <&tegra_car TEGRA210_CLK_AFI>, + <&tegra_car TEGRA210_CLK_PLL_E>, + <&tegra_car TEGRA210_CLK_CML0>; + clock-names = "pex", "afi", "pll_e", "cml"; + resets = <&tegra_car 70>, + <&tegra_car 72>, + <&tegra_car 74>; + reset-names = "pex", "afi", "pcie_x"; + status = "disabled"; + + pci@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>; + reg = <0x000800 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <4>; + }; + + pci@2,0 { + device_type = "pci"; + assigned-addresses = <0x82001000 0 0x01001000 0 0x1000>; + reg = <0x001000 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <1>; + }; + }; + +Board DTS: + + pcie-controller@1003000 { + status = "okay"; + + avdd-pll-uerefe-supply = <&avdd_1v05_pll>; + hvddio-pex-supply = <&vdd_1v8>; + dvddio-pex-supply = <&vdd_pex_1v05>; + dvdd-pex-pll-supply = <&vdd_pex_1v05>; + hvdd-pex-pll-e-supply = <&vdd_1v8>; + vddio-pex-ctl-supply = <&vdd_1v8>; + + pci@1,0 { + phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>, + <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>, + <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>, + <&{/padctl@7009f000/pads/pcie/lanes/pcie-3}>; + phy-names = "pcie-0", "pcie-1", "pcie-2", "pcie-3"; + status = "okay"; + }; + + pci@2,0 { + phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-4}>; + phy-names = "pcie-0"; + status = "okay"; + }; + }; + +Tegra186: +--------- + +SoC DTSI: + + pcie@10003000 { + compatible = "nvidia,tegra186-pcie"; + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_PCX>; + device_type = "pci"; + reg = <0x0 0x10003000 0x0 0x00000800 /* PADS registers */ + 0x0 0x10003800 0x0 0x00000800 /* AFI registers */ + 0x0 0x40000000 0x0 0x10000000>; /* configuration space */ + reg-names = "pads", "afi", "cs"; + + interrupts = , /* controller interrupt */ + ; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + + bus-range = <0x00 0xff>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x82000000 0 0x10000000 0x0 0x10000000 0 0x00001000 /* port 0 configuration space */ + 0x82000000 0 0x10001000 0x0 0x10001000 0 0x00001000 /* port 1 configuration space */ + 0x82000000 0 0x10004000 0x0 0x10004000 0 0x00001000 /* port 2 configuration space */ + 0x81000000 0 0x0 0x0 0x50000000 0 0x00010000 /* downstream I/O (64 KiB) */ + 0x82000000 0 0x50100000 0x0 0x50100000 0 0x07F00000 /* non-prefetchable memory (127 MiB) */ + 0xc2000000 0 0x58000000 0x0 0x58000000 0 0x28000000>; /* prefetchable memory (640 MiB) */ + + clocks = <&bpmp TEGRA186_CLK_AFI>, + <&bpmp TEGRA186_CLK_PCIE>, + <&bpmp TEGRA186_CLK_PLLE>; + clock-names = "afi", "pex", "pll_e"; + + resets = <&bpmp TEGRA186_RESET_AFI>, + <&bpmp TEGRA186_RESET_PCIE>, + <&bpmp TEGRA186_RESET_PCIEXCLK>; + reset-names = "afi", "pex", "pcie_x"; + + status = "disabled"; + + pci@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x10000000 0 0x1000>; + reg = <0x000800 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <2>; + }; + + pci@2,0 { + device_type = "pci"; + assigned-addresses = <0x82001000 0 0x10001000 0 0x1000>; + reg = <0x001000 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <1>; + }; + + pci@3,0 { + device_type = "pci"; + assigned-addresses = <0x82001800 0 0x10004000 0 0x1000>; + reg = <0x001800 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <1>; + }; + }; + +Board DTS: + + pcie@10003000 { + status = "okay"; + + dvdd-pex-supply = <&vdd_pex>; + hvdd-pex-pll-supply = <&vdd_1v8>; + hvdd-pex-supply = <&vdd_1v8>; + vddio-pexctl-aud-supply = <&vdd_1v8>; + + pci@1,0 { + nvidia,num-lanes = <4>; + status = "okay"; + }; + + pci@2,0 { + nvidia,num-lanes = <0>; + status = "disabled"; + }; + + pci@3,0 { + nvidia,num-lanes = <1>; + status = "disabled"; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/pci-armada8k.txt b/Documentation/devicetree/bindings/pci/pci-armada8k.txt new file mode 100644 index 000000000..ff25a134b --- /dev/null +++ b/Documentation/devicetree/bindings/pci/pci-armada8k.txt @@ -0,0 +1,48 @@ +* Marvell Armada 7K/8K PCIe interface + +This PCIe host controller is based on the Synopsys DesignWare PCIe IP +and thus inherits all the common properties defined in snps,dw-pcie.yaml. + +Required properties: +- compatible: "marvell,armada8k-pcie" +- reg: must contain two register regions + - the control register region + - the config space region +- reg-names: + - "ctrl" for the control register region + - "config" for the config space region +- interrupts: Interrupt specifier for the PCIe controller +- clocks: reference to the PCIe controller clocks +- clock-names: mandatory if there is a second clock, in this case the + name must be "core" for the first clock and "reg" for the second + one + +Optional properties: +- phys: phandle(s) to PHY node(s) following the generic PHY bindings. + Either 1, 2 or 4 PHYs might be needed depending on the number of + PCIe lanes. +- phy-names: names of the PHYs corresponding to the number of lanes. + Must be "cp0-pcie0-x4-lane0-phy", "cp0-pcie0-x4-lane1-phy" for + 2 PHYs. + +Example: + + pcie@f2600000 { + compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; + reg = <0 0xf2600000 0 0x10000>, <0 0xf6f00000 0 0x80000>; + reg-names = "ctrl", "config"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + dma-coherent; + + bus-range = <0 0xff>; + ranges = <0x81000000 0 0xf9000000 0 0xf9000000 0 0x10000 /* downstream I/O */ + 0x82000000 0 0xf6000000 0 0xf6000000 0 0xf00000>; /* non-prefetchable memory */ + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + interrupts = ; + num-lanes = <1>; + clocks = <&cpm_syscon0 1 13>; + }; diff --git a/Documentation/devicetree/bindings/pci/pci-ep.yaml b/Documentation/devicetree/bindings/pci/pci-ep.yaml new file mode 100644 index 000000000..ccec51ab5 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/pci-ep.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/pci-ep.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PCI Endpoint Controller Schema + +description: | + Common properties for PCI Endpoint Controller Nodes. + +maintainers: + - Kishon Vijay Abraham I + +properties: + $nodename: + pattern: "^pcie-ep@" + + max-functions: + description: Maximum number of functions that can be configured + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 1 + default: 1 + maximum: 255 + + max-virtual-functions: + description: Array representing the number of virtual functions corresponding to each physical + function + $ref: /schemas/types.yaml#/definitions/uint8-array + minItems: 1 + maxItems: 255 + + max-link-speed: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 1, 2, 3, 4 ] + + num-lanes: + description: maximum number of lanes + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + default: 1 + maximum: 16 + +required: + - compatible + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/pci/pci-iommu.txt b/Documentation/devicetree/bindings/pci/pci-iommu.txt new file mode 100644 index 000000000..0def586fd --- /dev/null +++ b/Documentation/devicetree/bindings/pci/pci-iommu.txt @@ -0,0 +1,171 @@ +This document describes the generic device tree binding for describing the +relationship between PCI(e) devices and IOMMU(s). + +Each PCI(e) device under a root complex is uniquely identified by its Requester +ID (AKA RID). A Requester ID is a triplet of a Bus number, Device number, and +Function number. + +For the purpose of this document, when treated as a numeric value, a RID is +formatted such that: + +* Bits [15:8] are the Bus number. +* Bits [7:3] are the Device number. +* Bits [2:0] are the Function number. +* Any other bits required for padding must be zero. + +IOMMUs may distinguish PCI devices through sideband data derived from the +Requester ID. While a given PCI device can only master through one IOMMU, a +root complex may split masters across a set of IOMMUs (e.g. with one IOMMU per +bus). + +The generic 'iommus' property is insufficient to describe this relationship, +and a mechanism is required to map from a PCI device to its IOMMU and sideband +data. + +For generic IOMMU bindings, see +Documentation/devicetree/bindings/iommu/iommu.txt. + + +PCI root complex +================ + +Optional properties +------------------- + +- iommu-map: Maps a Requester ID to an IOMMU and associated IOMMU specifier + data. + + The property is an arbitrary number of tuples of + (rid-base,iommu,iommu-base,length). + + Any RID r in the interval [rid-base, rid-base + length) is associated with + the listed IOMMU, with the IOMMU specifier (r - rid-base + iommu-base). + +- iommu-map-mask: A mask to be applied to each Requester ID prior to being + mapped to an IOMMU specifier per the iommu-map property. + + +Example (1) +=========== + +/ { + #address-cells = <1>; + #size-cells = <1>; + + iommu: iommu@a { + reg = <0xa 0x1>; + compatible = "vendor,some-iommu"; + #iommu-cells = <1>; + }; + + pci: pci@f { + reg = <0xf 0x1>; + compatible = "vendor,pcie-root-complex"; + device_type = "pci"; + + /* + * The sideband data provided to the IOMMU is the RID, + * identity-mapped. + */ + iommu-map = <0x0 &iommu 0x0 0x10000>; + }; +}; + + +Example (2) +=========== + +/ { + #address-cells = <1>; + #size-cells = <1>; + + iommu: iommu@a { + reg = <0xa 0x1>; + compatible = "vendor,some-iommu"; + #iommu-cells = <1>; + }; + + pci: pci@f { + reg = <0xf 0x1>; + compatible = "vendor,pcie-root-complex"; + device_type = "pci"; + + /* + * The sideband data provided to the IOMMU is the RID with the + * function bits masked out. + */ + iommu-map = <0x0 &iommu 0x0 0x10000>; + iommu-map-mask = <0xfff8>; + }; +}; + + +Example (3) +=========== + +/ { + #address-cells = <1>; + #size-cells = <1>; + + iommu: iommu@a { + reg = <0xa 0x1>; + compatible = "vendor,some-iommu"; + #iommu-cells = <1>; + }; + + pci: pci@f { + reg = <0xf 0x1>; + compatible = "vendor,pcie-root-complex"; + device_type = "pci"; + + /* + * The sideband data provided to the IOMMU is the RID, + * but the high bits of the bus number are flipped. + */ + iommu-map = <0x0000 &iommu 0x8000 0x8000>, + <0x8000 &iommu 0x0000 0x8000>; + }; +}; + + +Example (4) +=========== + +/ { + #address-cells = <1>; + #size-cells = <1>; + + iommu_a: iommu@a { + reg = <0xa 0x1>; + compatible = "vendor,some-iommu"; + #iommu-cells = <1>; + }; + + iommu_b: iommu@b { + reg = <0xb 0x1>; + compatible = "vendor,some-iommu"; + #iommu-cells = <1>; + }; + + iommu_c: iommu@c { + reg = <0xc 0x1>; + compatible = "vendor,some-iommu"; + #iommu-cells = <1>; + }; + + pci: pci@f { + reg = <0xf 0x1>; + compatible = "vendor,pcie-root-complex"; + device_type = "pci"; + + /* + * Devices with bus number 0-127 are mastered via IOMMU + * a, with sideband data being RID[14:0]. + * Devices with bus number 128-255 are mastered via + * IOMMU b, with sideband data being RID[14:0]. + * No devices master via IOMMU c. + */ + iommu-map = <0x0000 &iommu_a 0x0000 0x8000>, + <0x8000 &iommu_b 0x0000 0x8000>; + }; +}; diff --git a/Documentation/devicetree/bindings/pci/pci-msi.txt b/Documentation/devicetree/bindings/pci/pci-msi.txt new file mode 100644 index 000000000..b73d83965 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/pci-msi.txt @@ -0,0 +1,220 @@ +This document describes the generic device tree binding for describing the +relationship between PCI devices and MSI controllers. + +Each PCI device under a root complex is uniquely identified by its Requester ID +(AKA RID). A Requester ID is a triplet of a Bus number, Device number, and +Function number. + +For the purpose of this document, when treated as a numeric value, a RID is +formatted such that: + +* Bits [15:8] are the Bus number. +* Bits [7:3] are the Device number. +* Bits [2:0] are the Function number. +* Any other bits required for padding must be zero. + +MSIs may be distinguished in part through the use of sideband data accompanying +writes. In the case of PCI devices, this sideband data may be derived from the +Requester ID. A mechanism is required to associate a device with both the MSI +controllers it can address, and the sideband data that will be associated with +its writes to those controllers. + +For generic MSI bindings, see +Documentation/devicetree/bindings/interrupt-controller/msi.txt. + + +PCI root complex +================ + +Optional properties +------------------- + +- msi-map: Maps a Requester ID to an MSI controller and associated + msi-specifier data. The property is an arbitrary number of tuples of + (rid-base,msi-controller,msi-base,length), where: + + * rid-base is a single cell describing the first RID matched by the entry. + + * msi-controller is a single phandle to an MSI controller + + * msi-base is an msi-specifier describing the msi-specifier produced for the + first RID matched by the entry. + + * length is a single cell describing how many consecutive RIDs are matched + following the rid-base. + + Any RID r in the interval [rid-base, rid-base + length) is associated with + the listed msi-controller, with the msi-specifier (r - rid-base + msi-base). + +- msi-map-mask: A mask to be applied to each Requester ID prior to being mapped + to an msi-specifier per the msi-map property. + +- msi-parent: Describes the MSI parent of the root complex itself. Where + the root complex and MSI controller do not pass sideband data with MSI + writes, this property may be used to describe the MSI controller(s) + used by PCI devices under the root complex, if defined as such in the + binding for the root complex. + + +Example (1) +=========== + +/ { + #address-cells = <1>; + #size-cells = <1>; + + msi: msi-controller@a { + reg = <0xa 0x1>; + compatible = "vendor,some-controller"; + msi-controller; + #msi-cells = <1>; + }; + + pci: pci@f { + reg = <0xf 0x1>; + compatible = "vendor,pcie-root-complex"; + device_type = "pci"; + + /* + * The sideband data provided to the MSI controller is + * the RID, identity-mapped. + */ + msi-map = <0x0 &msi_a 0x0 0x10000>, + }; +}; + + +Example (2) +=========== + +/ { + #address-cells = <1>; + #size-cells = <1>; + + msi: msi-controller@a { + reg = <0xa 0x1>; + compatible = "vendor,some-controller"; + msi-controller; + #msi-cells = <1>; + }; + + pci: pci@f { + reg = <0xf 0x1>; + compatible = "vendor,pcie-root-complex"; + device_type = "pci"; + + /* + * The sideband data provided to the MSI controller is + * the RID, masked to only the device and function bits. + */ + msi-map = <0x0 &msi_a 0x0 0x100>, + msi-map-mask = <0xff> + }; +}; + + +Example (3) +=========== + +/ { + #address-cells = <1>; + #size-cells = <1>; + + msi: msi-controller@a { + reg = <0xa 0x1>; + compatible = "vendor,some-controller"; + msi-controller; + #msi-cells = <1>; + }; + + pci: pci@f { + reg = <0xf 0x1>; + compatible = "vendor,pcie-root-complex"; + device_type = "pci"; + + /* + * The sideband data provided to the MSI controller is + * the RID, but the high bit of the bus number is + * ignored. + */ + msi-map = <0x0000 &msi 0x0000 0x8000>, + <0x8000 &msi 0x0000 0x8000>; + }; +}; + + +Example (4) +=========== + +/ { + #address-cells = <1>; + #size-cells = <1>; + + msi: msi-controller@a { + reg = <0xa 0x1>; + compatible = "vendor,some-controller"; + msi-controller; + #msi-cells = <1>; + }; + + pci: pci@f { + reg = <0xf 0x1>; + compatible = "vendor,pcie-root-complex"; + device_type = "pci"; + + /* + * The sideband data provided to the MSI controller is + * the RID, but the high bit of the bus number is + * negated. + */ + msi-map = <0x0000 &msi 0x8000 0x8000>, + <0x8000 &msi 0x0000 0x8000>; + }; +}; + + +Example (5) +=========== + +/ { + #address-cells = <1>; + #size-cells = <1>; + + msi_a: msi-controller@a { + reg = <0xa 0x1>; + compatible = "vendor,some-controller"; + msi-controller; + #msi-cells = <1>; + }; + + msi_b: msi-controller@b { + reg = <0xb 0x1>; + compatible = "vendor,some-controller"; + msi-controller; + #msi-cells = <1>; + }; + + msi_c: msi-controller@c { + reg = <0xc 0x1>; + compatible = "vendor,some-controller"; + msi-controller; + #msi-cells = <1>; + }; + + pci: pci@f { + reg = <0xf 0x1>; + compatible = "vendor,pcie-root-complex"; + device_type = "pci"; + + /* + * The sideband data provided to MSI controller a is the + * RID, but the high bit of the bus number is negated. + * The sideband data provided to MSI controller b is the + * RID, identity-mapped. + * MSI controller c is not addressable. + */ + msi-map = <0x0000 &msi_a 0x8000 0x08000>, + <0x8000 &msi_a 0x0000 0x08000>, + <0x0000 &msi_b 0x0000 0x10000>; + }; +}; diff --git a/Documentation/devicetree/bindings/pci/pci.txt b/Documentation/devicetree/bindings/pci/pci.txt new file mode 100644 index 000000000..6a8f2874a --- /dev/null +++ b/Documentation/devicetree/bindings/pci/pci.txt @@ -0,0 +1,84 @@ +PCI bus bridges have standardized Device Tree bindings: + +PCI Bus Binding to: IEEE Std 1275-1994 +https://www.devicetree.org/open-firmware/bindings/pci/pci2_1.pdf + +And for the interrupt mapping part: + +Open Firmware Recommended Practice: Interrupt Mapping +https://www.devicetree.org/open-firmware/practice/imap/imap0_9d.pdf + +Additionally to the properties specified in the above standards a host bridge +driver implementation may support the following properties: + +- linux,pci-domain: + If present this property assigns a fixed PCI domain number to a host bridge, + otherwise an unstable (across boots) unique number will be assigned. + It is required to either not set this property at all or set it for all + host bridges in the system, otherwise potentially conflicting domain numbers + may be assigned to root buses behind different host bridges. The domain + number for each host bridge in the system must be unique. +- max-link-speed: + If present this property specifies PCI gen for link capability. Host + drivers could add this as a strategy to avoid unnecessary operation for + unsupported link speed, for instance, trying to do training for + unsupported link speed, etc. Must be '4' for gen4, '3' for gen3, '2' + for gen2, and '1' for gen1. Any other values are invalid. +- reset-gpios: + If present this property specifies PERST# GPIO. Host drivers can parse the + GPIO and apply fundamental reset to endpoints. +- supports-clkreq: + If present this property specifies that CLKREQ signal routing exists from + root port to downstream device and host bridge drivers can do programming + which depends on CLKREQ signal existence. For example, programming root port + not to advertise ASPM L1 Sub-States support if there is no CLKREQ signal. + +PCI-PCI Bridge properties +------------------------- + +PCIe root ports and switch ports may be described explicitly in the device +tree, as children of the host bridge node. Even though those devices are +discoverable by probing, it might be necessary to describe properties that +aren't provided by standard PCIe capabilities. + +Required properties: + +- reg: + Identifies the PCI-PCI bridge. As defined in the IEEE Std 1275-1994 + document, it is a five-cell address encoded as (phys.hi phys.mid + phys.lo size.hi size.lo). phys.hi should contain the device's BDF as + 0b00000000 bbbbbbbb dddddfff 00000000. The other cells should be zero. + + The bus number is defined by firmware, through the standard bridge + configuration mechanism. If this port is a switch port, then firmware + allocates the bus number and writes it into the Secondary Bus Number + register of the bridge directly above this port. Otherwise, the bus + number of a root port is the first number in the bus-range property, + defaulting to zero. + + If firmware leaves the ARI Forwarding Enable bit set in the bridge + above this port, then phys.hi contains the 8-bit function number as + 0b00000000 bbbbbbbb ffffffff 00000000. Note that the PCIe specification + recommends that firmware only leaves ARI enabled when it knows that the + OS is ARI-aware. + +Optional properties: + +- external-facing: + When present, the port is external-facing. All bridges and endpoints + downstream of this port are external to the machine. The OS can, for + example, use this information to identify devices that cannot be + trusted with relaxed DMA protection, as users could easily attach + malicious devices to this port. + +Example: + +pcie@10000000 { + compatible = "pci-host-ecam-generic"; + ... + pcie@0008 { + /* Root port 00:01.0 is external-facing */ + reg = <0x00000800 0 0 0 0>; + external-facing; + }; +}; diff --git a/Documentation/devicetree/bindings/pci/pcie-al.txt b/Documentation/devicetree/bindings/pci/pcie-al.txt new file mode 100644 index 000000000..2ad1fe466 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/pcie-al.txt @@ -0,0 +1,46 @@ +* Amazon Annapurna Labs PCIe host bridge + +Amazon's Annapurna Labs PCIe Host Controller is based on the Synopsys DesignWare +PCI core. It inherits common properties defined in +Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml. + +Properties of the host controller node that differ from it are: + +- compatible: + Usage: required + Value type: + Definition: Value should contain + - "amazon,al-alpine-v2-pcie" for alpine_v2 + - "amazon,al-alpine-v3-pcie" for alpine_v3 + +- reg: + Usage: required + Value type: + Definition: Register ranges as listed in the reg-names property + +- reg-names: + Usage: required + Value type: + Definition: Must include the following entries + - "config" PCIe ECAM space + - "controller" AL proprietary registers + - "dbi" Designware PCIe registers + +Example: + + pcie-external0: pcie@fb600000 { + compatible = "amazon,al-alpine-v3-pcie"; + reg = <0x0 0xfb600000 0x0 0x00100000 + 0x0 0xfd800000 0x0 0x00010000 + 0x0 0xfd810000 0x0 0x00001000>; + reg-names = "config", "controller", "dbi"; + bus-range = <0 255>; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupts = ; + interrupt-map-mask = <0x00 0 0 7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; /* INTa */ + ranges = <0x02000000 0x0 0xc0010000 0x0 0xc0010000 0x0 0x07ff0000>; + }; diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml new file mode 100644 index 000000000..977c976ea --- /dev/null +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml @@ -0,0 +1,202 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/qcom,pcie-ep.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm PCIe Endpoint Controller binding + +maintainers: + - Manivannan Sadhasivam + +properties: + compatible: + enum: + - qcom,sdx55-pcie-ep + - qcom,sm8450-pcie-ep + + reg: + items: + - description: Qualcomm-specific PARF configuration registers + - description: DesignWare PCIe registers + - description: External local bus interface registers + - description: Address Translation Unit (ATU) registers + - description: Memory region used to map remote RC address space + - description: BAR memory region + + reg-names: + items: + - const: parf + - const: dbi + - const: elbi + - const: atu + - const: addr_space + - const: mmio + + clocks: + minItems: 7 + maxItems: 8 + + clock-names: + minItems: 7 + maxItems: 8 + + qcom,perst-regs: + description: Reference to a syscon representing TCSR followed by the two + offsets within syscon for Perst enable and Perst separation + enable registers + $ref: "/schemas/types.yaml#/definitions/phandle-array" + items: + minItems: 3 + maxItems: 3 + + interrupts: + items: + - description: PCIe Global interrupt + - description: PCIe Doorbell interrupt + + interrupt-names: + items: + - const: global + - const: doorbell + + reset-gpios: + description: GPIO used as PERST# input signal + maxItems: 1 + + wake-gpios: + description: GPIO used as WAKE# output signal + maxItems: 1 + + resets: + maxItems: 1 + + reset-names: + const: core + + power-domains: + maxItems: 1 + + phys: + maxItems: 1 + + phy-names: + const: pciephy + + num-lanes: + default: 2 + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - interrupts + - interrupt-names + - reset-gpios + - resets + - reset-names + - power-domains + +allOf: + - $ref: pci-ep.yaml# + - if: + properties: + compatible: + contains: + enum: + - qcom,sdx55-pcie-ep + then: + properties: + clocks: + items: + - description: PCIe Auxiliary clock + - description: PCIe CFG AHB clock + - description: PCIe Master AXI clock + - description: PCIe Slave AXI clock + - description: PCIe Slave Q2A AXI clock + - description: PCIe Sleep clock + - description: PCIe Reference clock + clock-names: + items: + - const: aux + - const: cfg + - const: bus_master + - const: bus_slave + - const: slave_q2a + - const: sleep + - const: ref + + - if: + properties: + compatible: + contains: + enum: + - qcom,sm8450-pcie-ep + then: + properties: + clocks: + items: + - description: PCIe Auxiliary clock + - description: PCIe CFG AHB clock + - description: PCIe Master AXI clock + - description: PCIe Slave AXI clock + - description: PCIe Slave Q2A AXI clock + - description: PCIe Reference clock + - description: PCIe DDRSS SF TBU clock + - description: PCIe AGGRE NOC AXI clock + clock-names: + items: + - const: aux + - const: cfg + - const: bus_master + - const: bus_slave + - const: slave_q2a + - const: ref + - const: ddrss_sf_tbu + - const: aggre_noc_axi + +unevaluatedProperties: false + +examples: + - | + #include + #include + #include + pcie_ep: pcie-ep@40000000 { + compatible = "qcom,sdx55-pcie-ep"; + reg = <0x01c00000 0x3000>, + <0x40000000 0xf1d>, + <0x40000f20 0xc8>, + <0x40001000 0x1000>, + <0x40002000 0x1000>, + <0x01c03000 0x3000>; + reg-names = "parf", "dbi", "elbi", "atu", "addr_space", + "mmio"; + + clocks = <&gcc GCC_PCIE_AUX_CLK>, + <&gcc GCC_PCIE_CFG_AHB_CLK>, + <&gcc GCC_PCIE_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_SLV_AXI_CLK>, + <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>, + <&gcc GCC_PCIE_SLEEP_CLK>, + <&gcc GCC_PCIE_0_CLKREF_CLK>; + clock-names = "aux", "cfg", "bus_master", "bus_slave", + "slave_q2a", "sleep", "ref"; + + qcom,perst-regs = <&tcsr 0xb258 0xb270>; + + interrupts = , + ; + interrupt-names = "global", "doorbell"; + reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>; + resets = <&gcc GCC_PCIE_BCR>; + reset-names = "core"; + power-domains = <&gcc PCIE_GDSC>; + phys = <&pcie0_lane>; + phy-names = "pciephy"; + max-link-speed = <3>; + num-lanes = <2>; + }; diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml new file mode 100644 index 000000000..54f07852d --- /dev/null +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml @@ -0,0 +1,825 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/qcom,pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm PCI express root complex + +maintainers: + - Bjorn Andersson + - Stanimir Varbanov + +description: | + Qualcomm PCIe root complex controller is based on the Synopsys DesignWare + PCIe IP. + +properties: + compatible: + enum: + - qcom,pcie-ipq8064 + - qcom,pcie-ipq8064-v2 + - qcom,pcie-apq8064 + - qcom,pcie-apq8084 + - qcom,pcie-msm8996 + - qcom,pcie-ipq4019 + - qcom,pcie-ipq8074 + - qcom,pcie-qcs404 + - qcom,pcie-sa8540p + - qcom,pcie-sc7280 + - qcom,pcie-sc8180x + - qcom,pcie-sc8280xp + - qcom,pcie-sdm845 + - qcom,pcie-sm8150 + - qcom,pcie-sm8250 + - qcom,pcie-sm8450-pcie0 + - qcom,pcie-sm8450-pcie1 + - qcom,pcie-ipq6018 + + reg: + minItems: 4 + maxItems: 5 + + reg-names: + minItems: 4 + maxItems: 5 + + interrupts: + minItems: 1 + maxItems: 8 + + interrupt-names: + minItems: 1 + maxItems: 8 + + # Common definitions for clocks, clock-names and reset. + # Platform constraints are described later. + clocks: + minItems: 3 + maxItems: 13 + + clock-names: + minItems: 3 + maxItems: 13 + + resets: + minItems: 1 + maxItems: 12 + + resets-names: + minItems: 1 + maxItems: 12 + + vdda-supply: + description: A phandle to the core analog power supply + + vdda_phy-supply: + description: A phandle to the core analog power supply for PHY + + vdda_refclk-supply: + description: A phandle to the core analog power supply for IC which generates reference clock + + vddpe-3v3-supply: + description: A phandle to the PCIe endpoint power supply + + phys: + maxItems: 1 + + phy-names: + items: + - const: pciephy + + power-domains: + maxItems: 1 + + perst-gpios: + description: GPIO controlled connection to PERST# signal + maxItems: 1 + + wake-gpios: + description: GPIO controlled connection to WAKE# signal + maxItems: 1 + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-names + - "#interrupt-cells" + - interrupt-map-mask + - interrupt-map + - clocks + - clock-names + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-apq8064 + - qcom,pcie-ipq4019 + - qcom,pcie-ipq8064 + - qcom,pcie-ipq8064v2 + - qcom,pcie-ipq8074 + - qcom,pcie-qcs404 + then: + properties: + reg: + minItems: 4 + maxItems: 4 + reg-names: + items: + - const: dbi # DesignWare PCIe registers + - const: elbi # External local bus interface registers + - const: parf # Qualcomm specific registers + - const: config # PCIe configuration space + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-ipq6018 + then: + properties: + reg: + minItems: 5 + maxItems: 5 + reg-names: + items: + - const: dbi # DesignWare PCIe registers + - const: elbi # External local bus interface registers + - const: atu # ATU address space + - const: parf # Qualcomm specific registers + - const: config # PCIe configuration space + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-apq8084 + - qcom,pcie-msm8996 + - qcom,pcie-sdm845 + then: + properties: + reg: + minItems: 4 + maxItems: 4 + reg-names: + items: + - const: parf # Qualcomm specific registers + - const: dbi # DesignWare PCIe registers + - const: elbi # External local bus interface registers + - const: config # PCIe configuration space + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-sc7280 + - qcom,pcie-sc8180x + - qcom,pcie-sc8280xp + - qcom,pcie-sm8250 + - qcom,pcie-sm8450-pcie0 + - qcom,pcie-sm8450-pcie1 + then: + properties: + reg: + minItems: 5 + maxItems: 5 + reg-names: + items: + - const: parf # Qualcomm specific registers + - const: dbi # DesignWare PCIe registers + - const: elbi # External local bus interface registers + - const: atu # ATU address space + - const: config # PCIe configuration space + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-apq8064 + - qcom,pcie-ipq8064 + - qcom,pcie-ipq8064v2 + then: + properties: + clocks: + minItems: 3 + maxItems: 5 + clock-names: + minItems: 3 + items: + - const: core # Clocks the pcie hw block + - const: iface # Configuration AHB clock + - const: phy # Clocks the pcie PHY block + - const: aux # Clocks the pcie AUX block, not on apq8064 + - const: ref # Clocks the pcie ref block, not on apq8064 + resets: + minItems: 5 + maxItems: 6 + reset-names: + minItems: 5 + items: + - const: axi # AXI reset + - const: ahb # AHB reset + - const: por # POR reset + - const: pci # PCI reset + - const: phy # PHY reset + - const: ext # EXT reset, not on apq8064 + required: + - vdda-supply + - vdda_phy-supply + - vdda_refclk-supply + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-apq8084 + then: + properties: + clocks: + minItems: 4 + maxItems: 4 + clock-names: + items: + - const: iface # Configuration AHB clock + - const: master_bus # Master AXI clock + - const: slave_bus # Slave AXI clock + - const: aux # Auxiliary (AUX) clock + resets: + maxItems: 1 + reset-names: + items: + - const: core # Core reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-ipq4019 + then: + properties: + clocks: + minItems: 3 + maxItems: 3 + clock-names: + items: + - const: aux # Auxiliary (AUX) clock + - const: master_bus # Master AXI clock + - const: slave_bus # Slave AXI clock + resets: + minItems: 12 + maxItems: 12 + reset-names: + items: + - const: axi_m # AXI master reset + - const: axi_s # AXI slave reset + - const: pipe # PIPE reset + - const: axi_m_vmid # VMID reset + - const: axi_s_xpu # XPU reset + - const: parf # PARF reset + - const: phy # PHY reset + - const: axi_m_sticky # AXI sticky reset + - const: pipe_sticky # PIPE sticky reset + - const: pwr # PWR reset + - const: ahb # AHB reset + - const: phy_ahb # PHY AHB reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-msm8996 + then: + oneOf: + - properties: + clock-names: + items: + - const: pipe # Pipe Clock driving internal logic + - const: aux # Auxiliary (AUX) clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - properties: + clock-names: + items: + - const: pipe # Pipe Clock driving internal logic + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: cfg # Configuration clock + - const: aux # Auxiliary (AUX) clock + properties: + clocks: + minItems: 5 + maxItems: 5 + resets: false + reset-names: false + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-ipq8074 + then: + properties: + clocks: + minItems: 5 + maxItems: 5 + clock-names: + items: + - const: iface # PCIe to SysNOC BIU clock + - const: axi_m # AXI Master clock + - const: axi_s # AXI Slave clock + - const: ahb # AHB clock + - const: aux # Auxiliary clock + resets: + minItems: 7 + maxItems: 7 + reset-names: + items: + - const: pipe # PIPE reset + - const: sleep # Sleep reset + - const: sticky # Core Sticky reset + - const: axi_m # AXI Master reset + - const: axi_s # AXI Slave reset + - const: ahb # AHB Reset + - const: axi_m_sticky # AXI Master Sticky reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-ipq6018 + then: + properties: + clocks: + minItems: 5 + maxItems: 5 + clock-names: + items: + - const: iface # PCIe to SysNOC BIU clock + - const: axi_m # AXI Master clock + - const: axi_s # AXI Slave clock + - const: axi_bridge # AXI bridge clock + - const: rchng + resets: + minItems: 8 + maxItems: 8 + reset-names: + items: + - const: pipe # PIPE reset + - const: sleep # Sleep reset + - const: sticky # Core Sticky reset + - const: axi_m # AXI Master reset + - const: axi_s # AXI Slave reset + - const: ahb # AHB Reset + - const: axi_m_sticky # AXI Master Sticky reset + - const: axi_s_sticky # AXI Slave Sticky reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-qcs404 + then: + properties: + clocks: + minItems: 4 + maxItems: 4 + clock-names: + items: + - const: iface # AHB clock + - const: aux # Auxiliary clock + - const: master_bus # AXI Master clock + - const: slave_bus # AXI Slave clock + resets: + minItems: 6 + maxItems: 6 + reset-names: + items: + - const: axi_m # AXI Master reset + - const: axi_s # AXI Slave reset + - const: axi_m_sticky # AXI Master Sticky reset + - const: pipe_sticky # PIPE sticky reset + - const: pwr # PWR reset + - const: ahb # AHB reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-sc7280 + then: + properties: + clocks: + minItems: 13 + maxItems: 13 + clock-names: + items: + - const: pipe # PIPE clock + - const: pipe_mux # PIPE MUX + - const: phy_pipe # PIPE output clock + - const: ref # REFERENCE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: tbu # PCIe TBU clock + - const: ddrss_sf_tbu # PCIe SF TBU clock + - const: aggre0 # Aggre NoC PCIe CENTER SF AXI clock + - const: aggre1 # Aggre NoC PCIe1 AXI clock + resets: + maxItems: 1 + reset-names: + items: + - const: pci # PCIe core reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-sdm845 + then: + oneOf: + # Unfortunately the "optional" ref clock is used in the middle of the list + - properties: + clocks: + minItems: 8 + maxItems: 8 + clock-names: + items: + - const: pipe # PIPE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: ref # REFERENCE clock + - const: tbu # PCIe TBU clock + - properties: + clocks: + minItems: 7 + maxItems: 7 + clock-names: + items: + - const: pipe # PIPE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: tbu # PCIe TBU clock + properties: + resets: + maxItems: 1 + reset-names: + items: + - const: pci # PCIe core reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-sc8180x + - qcom,pcie-sm8150 + - qcom,pcie-sm8250 + then: + oneOf: + # Unfortunately the "optional" ref clock is used in the middle of the list + - properties: + clocks: + minItems: 9 + maxItems: 9 + clock-names: + items: + - const: pipe # PIPE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: ref # REFERENCE clock + - const: tbu # PCIe TBU clock + - const: ddrss_sf_tbu # PCIe SF TBU clock + - properties: + clocks: + minItems: 8 + maxItems: 8 + clock-names: + items: + - const: pipe # PIPE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: tbu # PCIe TBU clock + - const: ddrss_sf_tbu # PCIe SF TBU clock + properties: + resets: + maxItems: 1 + reset-names: + items: + - const: pci # PCIe core reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-sm8450-pcie0 + then: + properties: + clocks: + minItems: 12 + maxItems: 12 + clock-names: + items: + - const: pipe # PIPE clock + - const: pipe_mux # PIPE MUX + - const: phy_pipe # PIPE output clock + - const: ref # REFERENCE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: ddrss_sf_tbu # PCIe SF TBU clock + - const: aggre0 # Aggre NoC PCIe0 AXI clock + - const: aggre1 # Aggre NoC PCIe1 AXI clock + resets: + maxItems: 1 + reset-names: + items: + - const: pci # PCIe core reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-sm8450-pcie1 + then: + properties: + clocks: + minItems: 11 + maxItems: 11 + clock-names: + items: + - const: pipe # PIPE clock + - const: pipe_mux # PIPE MUX + - const: phy_pipe # PIPE output clock + - const: ref # REFERENCE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: ddrss_sf_tbu # PCIe SF TBU clock + - const: aggre1 # Aggre NoC PCIe1 AXI clock + resets: + maxItems: 1 + reset-names: + items: + - const: pci # PCIe core reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-sa8540p + - qcom,pcie-sc8280xp + then: + properties: + clocks: + minItems: 8 + maxItems: 9 + clock-names: + minItems: 8 + items: + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: ddrss_sf_tbu # PCIe SF TBU clock + - const: noc_aggr_4 # NoC aggregate 4 clock + - const: noc_aggr_south_sf # NoC aggregate South SF clock + - const: cnoc_qx # Configuration NoC QX clock + resets: + maxItems: 1 + reset-names: + items: + - const: pci # PCIe core reset + + - if: + not: + properties: + compatible: + contains: + enum: + - qcom,pcie-apq8064 + - qcom,pcie-ipq4019 + - qcom,pcie-ipq8064 + - qcom,pcie-ipq8064v2 + - qcom,pcie-ipq8074 + - qcom,pcie-qcs404 + then: + required: + - power-domains + + - if: + not: + properties: + compatible: + contains: + enum: + - qcom,pcie-msm8996 + then: + required: + - resets + - reset-names + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-msm8996 + - qcom,pcie-sc7280 + - qcom,pcie-sc8180x + - qcom,pcie-sdm845 + - qcom,pcie-sm8150 + - qcom,pcie-sm8250 + - qcom,pcie-sm8450-pcie0 + - qcom,pcie-sm8450-pcie1 + then: + oneOf: + - properties: + interrupts: + maxItems: 1 + interrupt-names: + items: + - const: msi + - properties: + interrupts: + minItems: 8 + interrupt-names: + items: + - const: msi0 + - const: msi1 + - const: msi2 + - const: msi3 + - const: msi4 + - const: msi5 + - const: msi6 + - const: msi7 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-sc8280xp + then: + properties: + interrupts: + minItems: 4 + maxItems: 4 + interrupt-names: + items: + - const: msi0 + - const: msi1 + - const: msi2 + - const: msi3 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-apq8064 + - qcom,pcie-apq8084 + - qcom,pcie-ipq4019 + - qcom,pcie-ipq6018 + - qcom,pcie-ipq8064 + - qcom,pcie-ipq8064-v2 + - qcom,pcie-ipq8074 + - qcom,pcie-qcs404 + - qcom,pcie-sa8540p + then: + properties: + interrupts: + maxItems: 1 + interrupt-names: + items: + - const: msi + +unevaluatedProperties: false + +examples: + - | + #include + pcie@1b500000 { + compatible = "qcom,pcie-ipq8064"; + reg = <0x1b500000 0x1000>, + <0x1b502000 0x80>, + <0x1b600000 0x100>, + <0x0ff00000 0x100000>; + reg-names = "dbi", "elbi", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000>, + <0x82000000 0 0 0x08000000 0 0x07e00000>; + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc 41>, + <&gcc 43>, + <&gcc 44>, + <&gcc 42>, + <&gcc 248>; + clock-names = "core", "iface", "phy", "aux", "ref"; + resets = <&gcc 27>, + <&gcc 26>, + <&gcc 25>, + <&gcc 24>, + <&gcc 23>, + <&gcc 22>; + reset-names = "axi", "ahb", "por", "pci", "phy", "ext"; + pinctrl-0 = <&pcie_pins_default>; + pinctrl-names = "default"; + vdda-supply = <&pm8921_s3>; + vdda_phy-supply = <&pm8921_lvs6>; + vdda_refclk-supply = <&ext_3p3v>; + }; + - | + #include + #include + pcie@fc520000 { + compatible = "qcom,pcie-apq8084"; + reg = <0xfc520000 0x2000>, + <0xff000000 0x1000>, + <0xff001000 0x1000>, + <0xff002000 0x2000>; + reg-names = "parf", "dbi", "elbi", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x81000000 0 0 0xff200000 0 0x00100000>, + <0x82000000 0 0x00300000 0xff300000 0 0x00d00000>; + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc 324>, + <&gcc 325>, + <&gcc 327>, + <&gcc 323>; + clock-names = "iface", "master_bus", "slave_bus", "aux"; + resets = <&gcc 81>; + reset-names = "core"; + power-domains = <&gcc 1>; + vdda-supply = <&pma8084_l3>; + phys = <&pciephy0>; + phy-names = "pciephy"; + perst-gpios = <&tlmm 70 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&pcie0_pins_default>; + pinctrl-names = "default"; + }; +... diff --git a/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt b/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt new file mode 100644 index 000000000..ffba4f63d --- /dev/null +++ b/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt @@ -0,0 +1,187 @@ +* Mediatek/Ralink RT3883 PCI controller + +1) Main node + + Required properties: + + - compatible: must be "ralink,rt3883-pci" + + - reg: specifies the physical base address of the controller and + the length of the memory mapped region. + + - #address-cells: specifies the number of cells needed to encode an + address. The value must be 1. + + - #size-cells: specifies the number of cells used to represent the size + of an address. The value must be 1. + + - ranges: specifies the translation between child address space and parent + address space + + Optional properties: + + - status: indicates the operational status of the device. + Value must be either "disabled" or "okay". + +2) Child nodes + + The main node must have two child nodes which describes the built-in + interrupt controller and the PCI host bridge. + + a) Interrupt controller: + + Required properties: + + - interrupt-controller: identifies the node as an interrupt controller + + - #address-cells: specifies the number of cells needed to encode an + address. The value must be 0. As such, 'interrupt-map' nodes do not + have to specify a parent unit address. + + - #interrupt-cells: specifies the number of cells needed to encode an + interrupt source. The value must be 1. + + - interrupts: specifies the interrupt source of the parent interrupt + controller. The format of the interrupt specifier depends on the + parent interrupt controller. + + b) PCI host bridge: + + Required properties: + + - #address-cells: specifies the number of cells needed to encode an + address. The value must be 0. + + - #size-cells: specifies the number of cells used to represent the size + of an address. The value must be 2. + + - #interrupt-cells: specifies the number of cells needed to encode an + interrupt source. The value must be 1. + + - device_type: must be "pci" + + - bus-range: PCI bus numbers covered + + - ranges: specifies the ranges for the PCI memory and I/O regions + + - interrupt-map-mask, + - interrupt-map: standard PCI properties to define the mapping of the + PCI interface to interrupt numbers. + + The PCI host bridge node might have additional sub-nodes representing + the onboard PCI devices/PCI slots. Each such sub-node must have the + following mandatory properties: + + - reg: used only for interrupt mapping, so only the first four bytes + are used to refer to the correct bus number and device number. + + - device_type: must be "pci" + + If a given sub-node represents a PCI bridge it must have following + mandatory properties as well: + + - #address-cells: must be set to <3> + + - #size-cells: must set to <2> + + - #interrupt-cells: must be set to <1> + + - interrupt-map-mask, + - interrupt-map: standard PCI properties to define the mapping of the + PCI interface to interrupt numbers. + + Besides the required properties the sub-nodes may have these optional + properties: + + - status: indicates the operational status of the sub-node. + Value must be either "disabled" or "okay". + +3) Example: + + a) SoC specific dtsi file: + + pci@10140000 { + compatible = "ralink,rt3883-pci"; + reg = <0x10140000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; /* direct mapping */ + + status = "disabled"; + + pciintc: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + + interrupt-parent = <&cpuintc>; + interrupts = <4>; + }; + + host-bridge { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + + device_type = "pci"; + + bus-range = <0 255>; + ranges = < + 0x02000000 0 0x00000000 0x20000000 0 0x10000000 /* pci memory */ + 0x01000000 0 0x00000000 0x10160000 0 0x00010000 /* io space */ + >; + + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 17 */ + 0x8800 0 0 1 &pciintc 18 + 0x8800 0 0 2 &pciintc 18 + 0x8800 0 0 3 &pciintc 18 + 0x8800 0 0 4 &pciintc 18 + /* IDSEL 18 */ + 0x9000 0 0 1 &pciintc 19 + 0x9000 0 0 2 &pciintc 19 + 0x9000 0 0 3 &pciintc 19 + 0x9000 0 0 4 &pciintc 19 + >; + + pci-bridge@1 { + reg = <0x0800 0 0 0 0>; + device_type = "pci"; + #interrupt-cells = <1>; + #address-cells = <3>; + #size-cells = <2>; + + interrupt-map-mask = <0x0 0 0 0>; + interrupt-map = <0x0 0 0 0 &pciintc 20>; + + status = "disabled"; + }; + + pci-slot@17 { + reg = <0x8800 0 0 0 0>; + device_type = "pci"; + + status = "disabled"; + }; + + pci-slot@18 { + reg = <0x9000 0 0 0 0>; + device_type = "pci"; + + status = "disabled"; + }; + }; + }; + + b) Board specific dts file: + + pci@10140000 { + status = "okay"; + + host-bridge { + pci-bridge@1 { + status = "okay"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml b/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml new file mode 100644 index 000000000..32a3b7665 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml @@ -0,0 +1,93 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2020 Renesas Electronics Europe GmbH - https://www.renesas.com/eu/en/ +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/rcar-pci-ep.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car PCIe Endpoint + +maintainers: + - Lad Prabhakar + - Yoshihiro Shimoda + +properties: + compatible: + items: + - enum: + - renesas,r8a774a1-pcie-ep # RZ/G2M + - renesas,r8a774b1-pcie-ep # RZ/G2N + - renesas,r8a774c0-pcie-ep # RZ/G2E + - renesas,r8a774e1-pcie-ep # RZ/G2H + - renesas,r8a7795-pcie-ep # R-Car H3 + - const: renesas,rcar-gen3-pcie-ep # R-Car Gen3 and RZ/G2 + + reg: + maxItems: 5 + + reg-names: + items: + - const: apb-base + - const: memory0 + - const: memory1 + - const: memory2 + - const: memory3 + + interrupts: + minItems: 3 + maxItems: 3 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: pcie + + max-functions: + minimum: 1 + maximum: 1 + +required: + - compatible + - reg + - reg-names + - interrupts + - resets + - power-domains + - clocks + - clock-names + - max-functions + +additionalProperties: false + +examples: + - | + #include + #include + #include + + pcie0_ep: pcie-ep@fe000000 { + compatible = "renesas,r8a774c0-pcie-ep", + "renesas,rcar-gen3-pcie-ep"; + reg = <0xfe000000 0x80000>, + <0xfe100000 0x100000>, + <0xfe200000 0x200000>, + <0x30000000 0x8000000>, + <0x38000000 0x8000000>; + reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3"; + interrupts = , + , + ; + resets = <&cpg 319>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 319>; + clock-names = "pcie"; + max-functions = /bits/ 8 <1>; + }; diff --git a/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml b/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml new file mode 100644 index 000000000..8fdfbc763 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml @@ -0,0 +1,125 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2020 Renesas Electronics Corp. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/rcar-pci-host.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car PCIe Host + +maintainers: + - Marek Vasut + - Yoshihiro Shimoda + +allOf: + - $ref: pci-bus.yaml# + +properties: + compatible: + oneOf: + - const: renesas,pcie-r8a7779 # R-Car H1 + - items: + - enum: + - renesas,pcie-r8a7742 # RZ/G1H + - renesas,pcie-r8a7743 # RZ/G1M + - renesas,pcie-r8a7744 # RZ/G1N + - renesas,pcie-r8a7790 # R-Car H2 + - renesas,pcie-r8a7791 # R-Car M2-W + - renesas,pcie-r8a7793 # R-Car M2-N + - const: renesas,pcie-rcar-gen2 # R-Car Gen2 and RZ/G1 + - items: + - enum: + - renesas,pcie-r8a774a1 # RZ/G2M + - renesas,pcie-r8a774b1 # RZ/G2N + - renesas,pcie-r8a774c0 # RZ/G2E + - renesas,pcie-r8a774e1 # RZ/G2H + - renesas,pcie-r8a7795 # R-Car H3 + - renesas,pcie-r8a7796 # R-Car M3-W + - renesas,pcie-r8a77961 # R-Car M3-W+ + - renesas,pcie-r8a77965 # R-Car M3-N + - renesas,pcie-r8a77980 # R-Car V3H + - renesas,pcie-r8a77990 # R-Car E3 + - const: renesas,pcie-rcar-gen3 # R-Car Gen3 and RZ/G2 + + reg: + maxItems: 1 + + interrupts: + minItems: 3 + maxItems: 3 + + clocks: + maxItems: 2 + + clock-names: + items: + - const: pcie + - const: pcie_bus + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + phys: + maxItems: 1 + + phy-names: + const: pcie + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - power-domains + +if: + not: + properties: + compatible: + contains: + const: renesas,pcie-r8a7779 +then: + required: + - resets + +unevaluatedProperties: false + +examples: + - | + #include + #include + #include + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie: pcie@fe000000 { + compatible = "renesas,pcie-r8a7791", "renesas,pcie-rcar-gen2"; + reg = <0 0xfe000000 0 0x80000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>, + <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>, + <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>, + <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>, + <0x42000000 2 0x00000000 2 0x00000000 0 0x40000000>; + interrupts = , + , + ; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 319>; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/renesas,pci-rcar-gen2.yaml b/Documentation/devicetree/bindings/pci/renesas,pci-rcar-gen2.yaml new file mode 100644 index 000000000..0f18cceba --- /dev/null +++ b/Documentation/devicetree/bindings/pci/renesas,pci-rcar-gen2.yaml @@ -0,0 +1,186 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/renesas,pci-rcar-gen2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas AHB to PCI bridge + +maintainers: + - Marek Vasut + - Yoshihiro Shimoda + +description: | + This is the bridge used internally to connect the USB controllers to the + AHB. There is one bridge instance per USB port connected to the internal + OHCI and EHCI controllers. + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,pci-r8a7742 # RZ/G1H + - renesas,pci-r8a7743 # RZ/G1M + - renesas,pci-r8a7744 # RZ/G1N + - renesas,pci-r8a7745 # RZ/G1E + - renesas,pci-r8a7790 # R-Car H2 + - renesas,pci-r8a7791 # R-Car M2-W + - renesas,pci-r8a7793 # R-Car M2-N + - renesas,pci-r8a7794 # R-Car E2 + - const: renesas,pci-rcar-gen2 # R-Car Gen2 and RZ/G1 + - items: + - enum: + - renesas,pci-r9a06g032 # RZ/N1D + - const: renesas,pci-rzn1 # RZ/N1 + + reg: + items: + - description: Operational registers for the OHCI/EHCI controllers. + - description: Bridge configuration and control registers. + + interrupts: + maxItems: 1 + + clocks: true + + clock-names: true + + resets: + maxItems: 1 + + power-domains: + maxItems: 1 + + bus-range: + description: | + The PCI bus number range; as this is a single bus, the range + should be specified as the same value twice. + + dma-ranges: + description: | + A single range for the inbound memory region. If not supplied, + defaults to 1GiB at 0x40000000. Note there are hardware restrictions on + the allowed combinations of address and size. + maxItems: 1 + +patternProperties: + 'usb@[0-1],0': + type: object + + description: + This a USB controller PCI device + + properties: + reg: + description: + Identify the correct bus, device and function number in the + form . + + items: + minItems: 5 + maxItems: 5 + + phys: + description: + Reference to the USB phy + maxItems: 1 + + phy-names: + maxItems: 1 + + required: + - reg + - phys + - phy-names + + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - interrupt-map + - interrupt-map-mask + - clocks + - power-domains + - bus-range + - "#address-cells" + - "#size-cells" + - "#interrupt-cells" + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + + - if: + properties: + compatible: + contains: + enum: + - renesas,pci-rzn1 + then: + properties: + clocks: + items: + - description: Internal bus clock (AHB) for HOST + - description: Internal bus clock (AHB) Power Management + - description: PCI clock for USB subsystem + clock-names: + items: + - const: hclkh + - const: hclkpm + - const: pciclk + required: + - clock-names + else: + properties: + clocks: + items: + - description: Device clock + clock-names: + items: + - const: pclk + required: + - resets + +unevaluatedProperties: false + +examples: + - | + #include + #include + #include + + pci@ee090000 { + compatible = "renesas,pci-r8a7790", "renesas,pci-rcar-gen2"; + device_type = "pci"; + reg = <0xee090000 0xc00>, + <0xee080000 0x1100>; + clocks = <&cpg CPG_MOD 703>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 703>; + interrupts = ; + + bus-range = <0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0xee080000 0xee080000 0 0x00010000>; + dma-ranges = <0x42000000 0 0x40000000 0x40000000 0 0x40000000>; + interrupt-map-mask = <0xf800 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + + usb@1,0 { + reg = <0x800 0 0 0 0>; + phys = <&usb0 0>; + phy-names = "usb"; + }; + + usb@2,0 { + reg = <0x1000 0 0 0 0>; + phys = <&usb0 0>; + phy-names = "usb"; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml new file mode 100644 index 000000000..bc0a9d1db --- /dev/null +++ b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml @@ -0,0 +1,131 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/rockchip-dw-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: DesignWare based PCIe controller on Rockchip SoCs + +maintainers: + - Shawn Lin + - Simon Xue + - Heiko Stuebner + +description: |+ + RK3568 SoC PCIe host controller is based on the Synopsys DesignWare + PCIe IP and thus inherits all the common properties defined in + designware-pcie.txt. + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + +properties: + compatible: + items: + - const: rockchip,rk3568-pcie + + reg: + items: + - description: Data Bus Interface (DBI) registers + - description: Rockchip designed configuration registers + - description: Config registers + + reg-names: + items: + - const: dbi + - const: apb + - const: config + + clocks: + items: + - description: AHB clock for PCIe master + - description: AHB clock for PCIe slave + - description: AHB clock for PCIe dbi + - description: APB clock for PCIe + - description: Auxiliary clock for PCIe + + clock-names: + items: + - const: aclk_mst + - const: aclk_slv + - const: aclk_dbi + - const: pclk + - const: aux + + msi-map: true + + num-lanes: true + + phys: + maxItems: 1 + + phy-names: + const: pcie-phy + + power-domains: + maxItems: 1 + + ranges: + maxItems: 2 + + resets: + maxItems: 1 + + reset-names: + const: pipe + + vpcie3v3-supply: true + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - msi-map + - num-lanes + - phys + - phy-names + - power-domains + - resets + - reset-names + +unevaluatedProperties: false + +examples: + - | + + bus { + #address-cells = <2>; + #size-cells = <2>; + + pcie3x2: pcie@fe280000 { + compatible = "rockchip,rk3568-pcie"; + reg = <0x3 0xc0800000 0x0 0x390000>, + <0x0 0xfe280000 0x0 0x10000>, + <0x3 0x80000000 0x0 0x100000>; + reg-names = "dbi", "apb", "config"; + bus-range = <0x20 0x2f>; + clocks = <&cru 143>, <&cru 144>, + <&cru 145>, <&cru 146>, + <&cru 147>; + clock-names = "aclk_mst", "aclk_slv", + "aclk_dbi", "pclk", + "aux"; + device_type = "pci"; + linux,pci-domain = <2>; + max-link-speed = <2>; + msi-map = <0x2000 &its 0x2000 0x1000>; + num-lanes = <2>; + phys = <&pcie30phy>; + phy-names = "pcie-phy"; + power-domains = <&power 15>; + ranges = <0x81000000 0x0 0x80800000 0x3 0x80800000 0x0 0x100000>, + <0x83000000 0x0 0x80900000 0x3 0x80900000 0x0 0x3f700000>; + resets = <&cru 193>; + reset-names = "pipe"; + #address-cells = <3>; + #size-cells = <2>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pci/rockchip-pcie-ep.txt b/Documentation/devicetree/bindings/pci/rockchip-pcie-ep.txt new file mode 100644 index 000000000..778467307 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/rockchip-pcie-ep.txt @@ -0,0 +1,62 @@ +* Rockchip AXI PCIe Endpoint Controller DT description + +Required properties: +- compatible: Should contain "rockchip,rk3399-pcie-ep" +- reg: Two register ranges as listed in the reg-names property +- reg-names: Must include the following names + - "apb-base" + - "mem-base" +- clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names: Must include the following entries: + - "aclk" + - "aclk-perf" + - "hclk" + - "pm" +- resets: Must contain seven entries for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names: Must include the following names + - "core" + - "mgmt" + - "mgmt-sticky" + - "pipe" + - "pm" + - "aclk" + - "pclk" +- pinctrl-names : The pin control state names +- pinctrl-0: The "default" pinctrl state +- phys: Must contain an phandle to a PHY for each entry in phy-names. +- phy-names: Must include 4 entries for all 4 lanes even if some of + them won't be used for your cases. Entries are of the form "pcie-phy-N": + where N ranges from 0 to 3. + (see example below and you MUST also refer to ../phy/rockchip-pcie-phy.txt + for changing the #phy-cells of phy node to support it) +- rockchip,max-outbound-regions: Maximum number of outbound regions + +Optional Property: +- num-lanes: number of lanes to use +- max-functions: Maximum number of functions that can be configured (default 1). + +pcie0-ep: pcie@f8000000 { + compatible = "rockchip,rk3399-pcie-ep"; + #address-cells = <3>; + #size-cells = <2>; + rockchip,max-outbound-regions = <16>; + clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>, + <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>; + clock-names = "aclk", "aclk-perf", + "hclk", "pm"; + max-functions = /bits/ 8 <8>; + num-lanes = <4>; + reg = <0x0 0xfd000000 0x0 0x1000000>, <0x0 0x80000000 0x0 0x20000>; + reg-names = "apb-base", "mem-base"; + resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>, + <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE> , + <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, <&cru SRST_A_PCIE>; + reset-names = "core", "mgmt", "mgmt-sticky", "pipe", + "pm", "pclk", "aclk"; + phys = <&pcie_phy 0>, <&pcie_phy 1>, <&pcie_phy 2>, <&pcie_phy 3>; + phy-names = "pcie-phy-0", "pcie-phy-1", "pcie-phy-2", "pcie-phy-3"; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_clkreq>; +}; diff --git a/Documentation/devicetree/bindings/pci/rockchip-pcie-host.txt b/Documentation/devicetree/bindings/pci/rockchip-pcie-host.txt new file mode 100644 index 000000000..af34c6577 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/rockchip-pcie-host.txt @@ -0,0 +1,135 @@ +* Rockchip AXI PCIe Root Port Bridge DT description + +Required properties: +- #address-cells: Address representation for root ports, set to <3> +- #size-cells: Size representation for root ports, set to <2> +- #interrupt-cells: specifies the number of cells needed to encode an + interrupt source. The value must be 1. +- compatible: Should contain "rockchip,rk3399-pcie" +- reg: Two register ranges as listed in the reg-names property +- reg-names: Must include the following names + - "axi-base" + - "apb-base" +- clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names: Must include the following entries: + - "aclk" + - "aclk-perf" + - "hclk" + - "pm" +- msi-map: Maps a Requester ID to an MSI controller and associated + msi-specifier data. See ./pci-msi.txt +- interrupts: Three interrupt entries must be specified. +- interrupt-names: Must include the following names + - "sys" + - "legacy" + - "client" +- resets: Must contain seven entries for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names: Must include the following names + - "core" + - "mgmt" + - "mgmt-sticky" + - "pipe" + - "pm" + - "aclk" + - "pclk" +- pinctrl-names : The pin control state names +- pinctrl-0: The "default" pinctrl state +- #interrupt-cells: specifies the number of cells needed to encode an + interrupt source. The value must be 1. +- interrupt-map-mask and interrupt-map: standard PCI properties + +Required properties for legacy PHY model (deprecated): +- phys: From PHY bindings: Phandle for the Generic PHY for PCIe. +- phy-names: MUST be "pcie-phy". + +Required properties for per-lane PHY model (preferred): +- phys: Must contain an phandle to a PHY for each entry in phy-names. +- phy-names: Must include 4 entries for all 4 lanes even if some of + them won't be used for your cases. Entries are of the form "pcie-phy-N": + where N ranges from 0 to 3. + (see example below and you MUST also refer to ../phy/rockchip-pcie-phy.txt + for changing the #phy-cells of phy node to support it) + +Optional Property: +- aspm-no-l0s: RC won't support ASPM L0s. This property is needed if + using 24MHz OSC for RC's PHY. +- ep-gpios: contain the entry for pre-reset GPIO +- num-lanes: number of lanes to use +- vpcie12v-supply: The phandle to the 12v regulator to use for PCIe. +- vpcie3v3-supply: The phandle to the 3.3v regulator to use for PCIe. +- vpcie1v8-supply: The phandle to the 1.8v regulator to use for PCIe. +- vpcie0v9-supply: The phandle to the 0.9v regulator to use for PCIe. + +*Interrupt controller child node* +The core controller provides a single interrupt for legacy INTx. The PCIe node +should contain an interrupt controller node as a target for the PCI +'interrupt-map' property. This node represents the domain at which the four +INTx interrupts are decoded and routed. + + +Required properties for Interrupt controller child node: +- interrupt-controller: identifies the node as an interrupt controller +- #address-cells: specifies the number of cells needed to encode an + address. The value must be 0. +- #interrupt-cells: specifies the number of cells needed to encode an + interrupt source. The value must be 1. + +Example: + +pcie0: pcie@f8000000 { + compatible = "rockchip,rk3399-pcie"; + #address-cells = <3>; + #size-cells = <2>; + clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>, + <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>; + clock-names = "aclk", "aclk-perf", + "hclk", "pm"; + bus-range = <0x0 0x1>; + interrupts = , + , + ; + interrupt-names = "sys", "legacy", "client"; + assigned-clocks = <&cru SCLK_PCIEPHY_REF>; + assigned-clock-parents = <&cru SCLK_PCIEPHY_REF100M>; + assigned-clock-rates = <100000000>; + ep-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; + ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x600000 + 0x81000000 0x0 0xfa600000 0x0 0xfa600000 0x0 0x100000>; + num-lanes = <4>; + msi-map = <0x0 &its 0x0 0x1000>; + reg = <0x0 0xf8000000 0x0 0x2000000>, <0x0 0xfd000000 0x0 0x1000000>; + reg-names = "axi-base", "apb-base"; + resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>, + <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE> , + <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, <&cru SRST_A_PCIE>; + reset-names = "core", "mgmt", "mgmt-sticky", "pipe", + "pm", "pclk", "aclk"; + /* deprecated legacy PHY model */ + phys = <&pcie_phy>; + phy-names = "pcie-phy"; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_clkreq>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie0_intc 0>, + <0 0 0 2 &pcie0_intc 1>, + <0 0 0 3 &pcie0_intc 2>, + <0 0 0 4 &pcie0_intc 3>; + pcie0_intc: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; +}; + +pcie0: pcie@f8000000 { + ... + + /* preferred per-lane PHY model */ + phys = <&pcie_phy 0>, <&pcie_phy 1>, <&pcie_phy 2>, <&pcie_phy 3>; + phy-names = "pcie-phy-0", "pcie-phy-1", "pcie-phy-2", "pcie-phy-3"; + + ... +}; diff --git a/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml b/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml new file mode 100644 index 000000000..f20ed7e70 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml @@ -0,0 +1,119 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/samsung,exynos-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung SoC series PCIe Host Controller + +maintainers: + - Marek Szyprowski + - Jaehoon Chung + +description: |+ + Exynos5433 SoC PCIe host controller is based on the Synopsys DesignWare + PCIe IP and thus inherits all the common properties defined in + snps,dw-pcie.yaml. + +allOf: + - $ref: /schemas/pci/snps,dw-pcie.yaml# + +properties: + compatible: + const: samsung,exynos5433-pcie + + reg: + items: + - description: Data Bus Interface (DBI) registers. + - description: External Local Bus interface (ELBI) registers. + - description: PCIe configuration space region. + + reg-names: + items: + - const: dbi + - const: elbi + - const: config + + interrupts: + maxItems: 1 + + clocks: + items: + - description: PCIe bridge clock + - description: PCIe bus clock + + clock-names: + items: + - const: pcie + - const: pcie_bus + + phys: + maxItems: 1 + + vdd10-supply: + description: + Phandle to a regulator that provides 1.0V power to the PCIe block. + + vdd18-supply: + description: + Phandle to a regulator that provides 1.8V power to the PCIe block. + + num-lanes: + const: 1 + + num-viewport: + const: 3 + +required: + - reg + - reg-names + - interrupts + - "#address-cells" + - "#size-cells" + - "#interrupt-cells" + - interrupt-map + - interrupt-map-mask + - ranges + - bus-range + - device_type + - num-lanes + - num-viewport + - clocks + - clock-names + - phys + - vdd10-supply + - vdd18-supply + +unevaluatedProperties: false + +examples: + - | + #include + #include + #include + + pcie: pcie@15700000 { + compatible = "samsung,exynos5433-pcie"; + reg = <0x15700000 0x1000>, <0x156b0000 0x1000>, <0x0c000000 0x1000>; + reg-names = "dbi", "elbi", "config"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + interrupts = ; + clocks = <&cmu_fsys CLK_PCIE>, <&cmu_fsys CLK_PCLK_PCIE_PHY>; + clock-names = "pcie", "pcie_bus"; + phys = <&pcie_phy>; + pinctrl-0 = <&pcie_bus &pcie_wlanen>; + pinctrl-names = "default"; + num-lanes = <1>; + num-viewport = <3>; + bus-range = <0x00 0xff>; + ranges = <0x81000000 0 0 0x0c001000 0 0x00010000>, + <0x82000000 0 0x0c011000 0x0c011000 0 0x03feefff>; + vdd10-supply = <&ldo6_reg>; + vdd18-supply = <&ldo7_reg>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>; + }; +... diff --git a/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml b/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml new file mode 100644 index 000000000..844fc7142 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml @@ -0,0 +1,120 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/sifive,fu740-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SiFive FU740 PCIe host controller + +description: |+ + SiFive FU740 PCIe host controller is based on the Synopsys DesignWare + PCI core. It shares common features with the PCIe DesignWare core and + inherits common properties defined in + Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml. + +maintainers: + - Paul Walmsley + - Greentime Hu + +allOf: + - $ref: /schemas/pci/snps,dw-pcie.yaml# + +properties: + compatible: + const: sifive,fu740-pcie + + reg: + maxItems: 3 + + reg-names: + items: + - const: dbi + - const: config + - const: mgmt + + dma-coherent: true + + num-lanes: + const: 8 + + msi-parent: true + + interrupt-names: + items: + - const: msi + - const: inta + - const: intb + - const: intc + - const: intd + + resets: + description: A phandle to the PCIe power up reset line. + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: pcie_aux + + pwren-gpios: + description: Should specify the GPIO for controlling the PCI bus device power on. + maxItems: 1 + + reset-gpios: + maxItems: 1 + +required: + - dma-coherent + - num-lanes + - interrupts + - interrupt-names + - interrupt-map-mask + - interrupt-map + - clocks + - clock-names + - resets + - pwren-gpios + - reset-gpios + +unevaluatedProperties: false + +examples: + - | + bus { + #address-cells = <2>; + #size-cells = <2>; + #include + + pcie@e00000000 { + compatible = "sifive,fu740-pcie"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + reg = <0xe 0x00000000 0x0 0x80000000>, + <0xd 0xf0000000 0x0 0x10000000>, + <0x0 0x100d0000 0x0 0x1000>; + reg-names = "dbi", "config", "mgmt"; + device_type = "pci"; + dma-coherent; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x60080000 0x0 0x60080000 0x0 0x10000>, /* I/O */ + <0x82000000 0x0 0x60090000 0x0 0x60090000 0x0 0xff70000>, /* mem */ + <0x82000000 0x0 0x70000000 0x0 0x70000000 0x0 0x1000000>, /* mem */ + <0xc3000000 0x20 0x00000000 0x20 0x00000000 0x20 0x00000000>; /* mem prefetchable */ + num-lanes = <0x8>; + interrupts = <56>, <57>, <58>, <59>, <60>, <61>, <62>, <63>, <64>; + interrupt-names = "msi", "inta", "intb", "intc", "intd"; + interrupt-parent = <&plic0>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &plic0 57>, + <0x0 0x0 0x0 0x2 &plic0 58>, + <0x0 0x0 0x0 0x3 &plic0 59>, + <0x0 0x0 0x0 0x4 &plic0 60>; + clock-names = "pcie_aux"; + clocks = <&prci FU740_PRCI_CLK_PCIE_AUX>; + resets = <&prci 4>; + pwren-gpios = <&gpio 5 0>; + reset-gpios = <&gpio 8 0>; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml new file mode 100644 index 000000000..b78535040 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/snps,dw-pcie-ep.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synopsys DesignWare PCIe endpoint interface + +maintainers: + - Jingoo Han + - Gustavo Pimentel + +description: | + Synopsys DesignWare PCIe host controller endpoint + +allOf: + - $ref: /schemas/pci/pci-ep.yaml# + +properties: + compatible: + anyOf: + - {} + - const: snps,dw-pcie-ep + + reg: + description: | + It should contain Data Bus Interface (dbi) and config registers for all + versions. + For designware core version >= 4.80, it may contain ATU address space. + minItems: 2 + maxItems: 4 + + reg-names: + minItems: 2 + maxItems: 4 + items: + enum: [dbi, dbi2, config, atu, addr_space, link, atu_dma, appl] + + reset-gpio: + description: GPIO pin number of PERST# signal + maxItems: 1 + deprecated: true + + reset-gpios: + description: GPIO controlled connection to PERST# signal + maxItems: 1 + + snps,enable-cdm-check: + type: boolean + description: | + This is a boolean property and if present enables + automatic checking of CDM (Configuration Dependent Module) registers + for data corruption. CDM registers include standard PCIe configuration + space registers, Port Logic registers, DMA and iATU (internal Address + Translation Unit) registers. + + num-ib-windows: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 256 + description: number of inbound address translation windows + deprecated: true + + num-ob-windows: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 256 + description: number of outbound address translation windows + deprecated: true + +required: + - reg + - reg-names + - compatible + +additionalProperties: true + +examples: + - | + bus { + #address-cells = <1>; + #size-cells = <1>; + pcie-ep@dfd00000 { + compatible = "snps,dw-pcie-ep"; + reg = <0xdfc00000 0x0001000>, /* IP registers 1 */ + <0xdfc01000 0x0001000>, /* IP registers 2 */ + <0xd0000000 0x2000000>; /* Configuration space */ + reg-names = "dbi", "dbi2", "addr_space"; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml new file mode 100644 index 000000000..7287d395e --- /dev/null +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml @@ -0,0 +1,104 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/snps,dw-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synopsys DesignWare PCIe interface + +maintainers: + - Jingoo Han + - Gustavo Pimentel + +description: | + Synopsys DesignWare PCIe host controller + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + +properties: + compatible: + anyOf: + - {} + - const: snps,dw-pcie + + reg: + description: | + It should contain Data Bus Interface (dbi) and config registers for all + versions. + For designware core version >= 4.80, it may contain ATU address space. + minItems: 2 + maxItems: 5 + + reg-names: + minItems: 2 + maxItems: 5 + items: + enum: [ dbi, dbi2, config, atu, atu_dma, app, appl, elbi, mgmt, ctrl, + parf, cfg, link, ulreg, smu, mpu, apb, phy ] + + num-lanes: + description: | + number of lanes to use (this property should be specified unless + the link is brought already up in firmware) + maximum: 16 + + reset-gpio: + description: GPIO pin number of PERST# signal + maxItems: 1 + deprecated: true + + reset-gpios: + description: GPIO controlled connection to PERST# signal + maxItems: 1 + + interrupts: true + + interrupt-names: true + + clocks: true + + snps,enable-cdm-check: + type: boolean + description: | + This is a boolean property and if present enables + automatic checking of CDM (Configuration Dependent Module) registers + for data corruption. CDM registers include standard PCIe configuration + space registers, Port Logic registers, DMA and iATU (internal Address + Translation Unit) registers. + + num-viewport: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 256 + description: | + number of view ports configured in hardware. If a platform + does not specify it, the driver autodetects it. + deprecated: true + +additionalProperties: true + +required: + - reg + - reg-names + - compatible + +examples: + - | + bus { + #address-cells = <1>; + #size-cells = <1>; + pcie@dfc00000 { + device_type = "pci"; + compatible = "snps,dw-pcie"; + reg = <0xdfc00000 0x0001000>, /* IP registers */ + <0xd0000000 0x0002000>; /* Configuration space */ + reg-names = "dbi", "config"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x81000000 0 0x00000000 0xde000000 0 0x00010000>, + <0x82000000 0 0xd0400000 0xd0400000 0 0x0d000000>; + interrupts = <25>, <24>; + #interrupt-cells = <1>; + num-lanes = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml new file mode 100644 index 000000000..437e61618 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml @@ -0,0 +1,108 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/socionext,uniphier-pcie-ep.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier PCIe endpoint controller + +description: | + UniPhier PCIe endpoint controller is based on the Synopsys DesignWare + PCI core. It shares common features with the PCIe DesignWare core and + inherits common properties defined in + Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml. + +maintainers: + - Kunihiko Hayashi + +allOf: + - $ref: /schemas/pci/snps,dw-pcie-ep.yaml# + +properties: + compatible: + enum: + - socionext,uniphier-pro5-pcie-ep + - socionext,uniphier-nx1-pcie-ep + + reg: + minItems: 4 + maxItems: 5 + + reg-names: + oneOf: + - items: + - const: dbi + - const: dbi2 + - const: link + - const: addr_space + - items: + - const: dbi + - const: dbi2 + - const: link + - const: addr_space + - const: atu + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + oneOf: + - items: # for Pro5 + - const: gio + - const: link + - const: link # for NX1 + + resets: + minItems: 1 + maxItems: 2 + + reset-names: + oneOf: + - items: # for Pro5 + - const: gio + - const: link + - const: link # for NX1 + + num-ib-windows: + const: 16 + + num-ob-windows: + const: 16 + + num-lanes: true + + phys: + maxItems: 1 + + phy-names: + const: pcie-phy + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - resets + - reset-names + +unevaluatedProperties: false + +examples: + - | + pcie_ep: pcie-ep@66000000 { + compatible = "socionext,uniphier-pro5-pcie-ep"; + reg-names = "dbi", "dbi2", "link", "addr_space"; + reg = <0x66000000 0x1000>, <0x66001000 0x1000>, + <0x66010000 0x10000>, <0x67000000 0x400000>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 24>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 24>; + num-ib-windows = <16>; + num-ob-windows = <16>; + num-lanes = <4>; + phy-names = "pcie-phy"; + phys = <&pcie_phy>; + }; diff --git a/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie.yaml b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie.yaml new file mode 100644 index 000000000..638b99db0 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie.yaml @@ -0,0 +1,117 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/socionext,uniphier-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier PCIe host controller + +description: | + UniPhier PCIe host controller is based on the Synopsys DesignWare + PCI core. It shares common features with the PCIe DesignWare core and + inherits common properties defined in + Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml. + +maintainers: + - Kunihiko Hayashi + +allOf: + - $ref: /schemas/pci/snps,dw-pcie.yaml# + +properties: + compatible: + enum: + - socionext,uniphier-pcie + + reg: + minItems: 3 + maxItems: 4 + + reg-names: + minItems: 3 + items: + - const: dbi + - const: link + - const: config + - const: atu + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + num-viewport: true + + num-lanes: true + + phys: + maxItems: 1 + + phy-names: + const: pcie-phy + + interrupt-controller: + type: object + additionalProperties: false + + properties: + interrupt-controller: true + + '#interrupt-cells': + const: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - reg-names + - clocks + - resets + +unevaluatedProperties: false + +examples: + - | + bus { + gic: interrupt-controller { + interrupt-controller; + #interrupt-cells = <3>; + }; + }; + + pcie: pcie@66000000 { + compatible = "socionext,uniphier-pcie"; + reg-names = "dbi", "link", "config"; + reg = <0x66000000 0x1000>, <0x66010000 0x10000>, <0x2fff0000 0x10000>; + #address-cells = <3>; + #size-cells = <2>; + clocks = <&sys_clk 24>; + resets = <&sys_rst 24>; + num-lanes = <1>; + num-viewport = <1>; + bus-range = <0x0 0xff>; + device_type = "pci"; + ranges = <0x81000000 0 0x00000000 0x2ffe0000 0 0x00010000>, + <0x82000000 0 0x00000000 0x20000000 0 0x0ffe0000>; + phy-names = "pcie-phy"; + phys = <&pcie_phy>; + #interrupt-cells = <1>; + interrupt-names = "dma", "msi"; + interrupt-parent = <&gic>; + interrupts = <0 224 4>, <0 225 4>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc 0>, + <0 0 0 2 &pcie_intc 1>, + <0 0 0 3 &pcie_intc 2>, + <0 0 0 4 &pcie_intc 3>; + + pcie_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <0 226 4>; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/spear13xx-pcie.txt b/Documentation/devicetree/bindings/pci/spear13xx-pcie.txt new file mode 100644 index 000000000..d5a14f5da --- /dev/null +++ b/Documentation/devicetree/bindings/pci/spear13xx-pcie.txt @@ -0,0 +1,14 @@ +SPEAr13XX PCIe DT detail: +================================ + +SPEAr13XX uses the Synopsys DesignWare PCIe controller and ST MiPHY as PHY +controller. + +Required properties: +- compatible : should be "st,spear1340-pcie", "snps,dw-pcie". +- phys : phandle to PHY node associated with PCIe controller +- phy-names : must be "pcie-phy" +- All other definitions as per generic PCI bindings + + Optional properties: +- st,pcie-is-gen1 indicates that forced gen1 initialization is needed. diff --git a/Documentation/devicetree/bindings/pci/ti,am65-pci-ep.yaml b/Documentation/devicetree/bindings/pci/ti,am65-pci-ep.yaml new file mode 100644 index 000000000..74195c1f5 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/ti,am65-pci-ep.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2021 Texas Instruments Incorporated - http://www.ti.com/ +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/ti,am65-pci-ep.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI AM65 PCI Endpoint + +maintainers: + - Kishon Vijay Abraham I + +allOf: + - $ref: pci-ep.yaml# + +properties: + compatible: + enum: + - ti,am654-pcie-ep + + reg: + maxItems: 4 + + reg-names: + items: + - const: app + - const: dbics + - const: addr_space + - const: atu + + power-domains: + maxItems: 1 + + ti,syscon-pcie-mode: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: Phandle to the SYSCON entry + - description: pcie_ctrl register offset within SYSCON + description: Phandle to the SYSCON entry required for configuring PCIe in RC or EP mode. + + interrupts: + minItems: 1 + + dma-coherent: true + +required: + - compatible + - reg + - reg-names + - max-link-speed + - power-domains + - ti,syscon-pcie-mode + - dma-coherent + +unevaluatedProperties: false + +examples: + - | + #include + #include + #include + + pcie0_ep: pcie-ep@5500000 { + compatible = "ti,am654-pcie-ep"; + reg = <0x5500000 0x1000>, + <0x5501000 0x1000>, + <0x10000000 0x8000000>, + <0x5506000 0x1000>; + reg-names = "app", "dbics", "addr_space", "atu"; + power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>; + ti,syscon-pcie-mode = <&scm_conf 0x4060>; + max-link-speed = <2>; + dma-coherent; + interrupts = ; + }; diff --git a/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml b/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml new file mode 100644 index 000000000..a20dccbaf --- /dev/null +++ b/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2021 Texas Instruments Incorporated - http://www.ti.com/ +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/ti,am65-pci-host.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI AM65 PCI Host + +maintainers: + - Kishon Vijay Abraham I + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + +properties: + compatible: + enum: + - ti,am654-pcie-rc + - ti,keystone-pcie + + reg: + maxItems: 4 + + reg-names: + items: + - const: app + - const: dbics + - const: config + - const: atu + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + + ti,syscon-pcie-id: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: Phandle to the SYSCON entry + - description: pcie_device_id register offset within SYSCON + description: Phandle to the SYSCON entry required for getting PCIe device/vendor ID + + ti,syscon-pcie-mode: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: Phandle to the SYSCON entry + - description: pcie_ctrl register offset within SYSCON + description: Phandle to the SYSCON entry required for configuring PCIe in RC or EP mode. + + msi-map: true + + dma-coherent: true + +required: + - compatible + - reg + - reg-names + - max-link-speed + - ti,syscon-pcie-id + - ti,syscon-pcie-mode + - ranges + +if: + properties: + compatible: + enum: + - ti,am654-pcie-rc +then: + required: + - dma-coherent + - power-domains + - msi-map + +unevaluatedProperties: false + +examples: + - | + #include + #include + #include + + pcie0_rc: pcie@5500000 { + compatible = "ti,am654-pcie-rc"; + reg = <0x5500000 0x1000>, + <0x5501000 0x1000>, + <0x10000000 0x2000>, + <0x5506000 0x1000>; + reg-names = "app", "dbics", "config", "atu"; + power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x81000000 0 0 0x10020000 0 0x00010000>, + <0x82000000 0 0x10030000 0x10030000 0 0x07FD0000>; + ti,syscon-pcie-id = <&scm_conf 0x0210>; + ti,syscon-pcie-mode = <&scm_conf 0x4060>; + bus-range = <0x0 0xff>; + max-link-speed = <2>; + dma-coherent; + interrupts = ; + msi-map = <0x0 &gic_its 0x0 0x10000>; + device_type = "pci"; + }; diff --git a/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml b/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml new file mode 100644 index 000000000..aed437dac --- /dev/null +++ b/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml @@ -0,0 +1,103 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/ +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/pci/ti,j721e-pci-ep.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: TI J721E PCI EP (PCIe Wrapper) + +maintainers: + - Kishon Vijay Abraham I + +allOf: + - $ref: "cdns-pcie-ep.yaml#" + +properties: + compatible: + oneOf: + - const: ti,j721e-pcie-ep + - description: PCIe EP controller in AM64 + items: + - const: ti,am64-pcie-ep + - const: ti,j721e-pcie-ep + - description: PCIe EP controller in J7200 + items: + - const: ti,j7200-pcie-ep + - const: ti,j721e-pcie-ep + + reg: + maxItems: 4 + + reg-names: + items: + - const: intd_cfg + - const: user_cfg + - const: reg + - const: mem + + ti,syscon-pcie-ctrl: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: Phandle to the SYSCON entry + - description: pcie_ctrl register offset within SYSCON + description: Specifier for configuring PCIe mode and link speed. + + power-domains: + maxItems: 1 + + clocks: + maxItems: 1 + description: clock-specifier to represent input to the PCIe + + clock-names: + items: + - const: fck + + dma-coherent: + description: Indicates that the PCIe IP block can ensure the coherency + +required: + - compatible + - reg + - reg-names + - ti,syscon-pcie-ctrl + - max-link-speed + - num-lanes + - power-domains + - clocks + - clock-names + - max-functions + - phys + - phy-names + +unevaluatedProperties: false + +examples: + - | + #include + + bus { + #address-cells = <2>; + #size-cells = <2>; + + pcie0_ep: pcie-ep@d000000 { + compatible = "ti,j721e-pcie-ep"; + reg = <0x00 0x02900000 0x00 0x1000>, + <0x00 0x02907000 0x00 0x400>, + <0x00 0x0d000000 0x00 0x00800000>, + <0x00 0x10000000 0x00 0x08000000>; + reg-names = "intd_cfg", "user_cfg", "reg", "mem"; + ti,syscon-pcie-ctrl = <&pcie0_ctrl 0x4070>; + max-link-speed = <3>; + num-lanes = <2>; + power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 239 1>; + clock-names = "fck"; + max-functions = /bits/ 8 <6>; + dma-coherent; + phys = <&serdes0_pcie_link>; + phy-names = "pcie-phy"; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml new file mode 100644 index 000000000..2115d5a3f --- /dev/null +++ b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml @@ -0,0 +1,137 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/pci/ti,j721e-pci-host.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: TI J721E PCI Host (PCIe Wrapper) + +maintainers: + - Kishon Vijay Abraham I + +allOf: + - $ref: "cdns-pcie-host.yaml#" + +properties: + compatible: + oneOf: + - const: ti,j721e-pcie-host + - description: PCIe controller in AM64 + items: + - const: ti,am64-pcie-host + - const: ti,j721e-pcie-host + - description: PCIe controller in J7200 + items: + - const: ti,j7200-pcie-host + - const: ti,j721e-pcie-host + + reg: + maxItems: 4 + + reg-names: + items: + - const: intd_cfg + - const: user_cfg + - const: reg + - const: cfg + + ti,syscon-pcie-ctrl: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: Phandle to the SYSCON entry + - description: pcie_ctrl register offset within SYSCON + description: Specifier for configuring PCIe mode and link speed. + + power-domains: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + description: |+ + clock-specifier to represent input to the PCIe for 1 item. + 2nd item if present represents reference clock to the connector. + + clock-names: + minItems: 1 + items: + - const: fck + - const: pcie_refclk + + dma-coherent: true + + vendor-id: + const: 0x104c + + device-id: + oneOf: + - items: + - const: 0xb00d + - items: + - const: 0xb00f + - items: + - const: 0xb010 + + msi-map: true + +required: + - compatible + - reg + - reg-names + - ti,syscon-pcie-ctrl + - max-link-speed + - num-lanes + - power-domains + - clocks + - clock-names + - vendor-id + - device-id + - msi-map + - dma-ranges + - ranges + - reset-gpios + - phys + - phy-names + +unevaluatedProperties: false + +examples: + - | + #include + #include + + bus { + #address-cells = <2>; + #size-cells = <2>; + + pcie0_rc: pcie@2900000 { + compatible = "ti,j721e-pcie-host"; + reg = <0x00 0x02900000 0x00 0x1000>, + <0x00 0x02907000 0x00 0x400>, + <0x00 0x0d000000 0x00 0x00800000>, + <0x00 0x10000000 0x00 0x00001000>; + reg-names = "intd_cfg", "user_cfg", "reg", "cfg"; + ti,syscon-pcie-ctrl = <&pcie0_ctrl 0x4070>; + max-link-speed = <3>; + num-lanes = <2>; + power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 239 1>; + clock-names = "fck"; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x0 0xf>; + vendor-id = <0x104c>; + device-id = <0xb00d>; + msi-map = <0x0 &gic_its 0x0 0x10000>; + dma-coherent; + reset-gpios = <&exp1 6 GPIO_ACTIVE_HIGH>; + phys = <&serdes0_pcie_link>; + phy-names = "pcie-phy"; + ranges = <0x01000000 0x0 0x10001000 0x00 0x10001000 0x0 0x0010000>, + <0x02000000 0x0 0x10011000 0x00 0x10011000 0x0 0x7fef000>; + dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/ti-pci.txt b/Documentation/devicetree/bindings/pci/ti-pci.txt new file mode 100644 index 000000000..8147e3e3e --- /dev/null +++ b/Documentation/devicetree/bindings/pci/ti-pci.txt @@ -0,0 +1,102 @@ +TI PCI Controllers + +PCIe DesignWare Controller + - compatible: Should be "ti,dra7-pcie" for RC (deprecated) + Should be "ti,dra7-pcie-ep" for EP (deprecated) + Should be "ti,dra746-pcie-rc" for dra74x/dra76 in RC mode + Should be "ti,dra746-pcie-ep" for dra74x/dra76 in EP mode + Should be "ti,dra726-pcie-rc" for dra72x in RC mode + Should be "ti,dra726-pcie-ep" for dra72x in EP mode + - phys : list of PHY specifiers (used by generic PHY framework) + - phy-names : must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the + number of PHYs as specified in *phys* property. + - ti,hwmods : Name of the hwmod associated to the pcie, "pcie", + where is the instance number of the pcie from the HW spec. + - num-lanes as specified in ../snps,dw-pcie.yaml + - ti,syscon-lane-sel : phandle/offset pair. Phandle to the system control + module and the register offset to specify lane + selection. + +HOST MODE +========= + - reg : Two register ranges as listed in the reg-names property + - reg-names : The first entry must be "ti-conf" for the TI-specific registers + The second entry must be "rc-dbics" for the DesignWare PCIe + registers + The third entry must be "config" for the PCIe configuration space + - interrupts : Two interrupt entries must be specified. The first one is for + main interrupt line and the second for MSI interrupt line. + - #address-cells, + #size-cells, + #interrupt-cells, + device_type, + ranges, + interrupt-map-mask, + interrupt-map : as specified in ../snps,dw-pcie.yaml + - ti,syscon-unaligned-access: phandle to the syscon DT node. The 1st argument + should contain the register offset within syscon + and the 2nd argument should contain the bit field + for setting the bit to enable unaligned + access. + +DEVICE MODE +=========== + - reg : Four register ranges as listed in the reg-names property + - reg-names : "ti-conf" for the TI-specific registers + "ep_dbics" for the standard configuration registers as + they are locally accessed within the DIF CS space + "ep_dbics2" for the standard configuration registers as + they are locally accessed within the DIF CS2 space + "addr_space" used to map remote RC address space + - interrupts : one interrupt entries must be specified for main interrupt. + - num-ib-windows : number of inbound address translation windows + - num-ob-windows : number of outbound address translation windows + - ti,syscon-unaligned-access: phandle to the syscon DT node. The 1st argument + should contain the register offset within syscon + and the 2nd argument should contain the bit field + for setting the bit to enable unaligned + access. + +Optional Property: + - gpios : Should be added if a GPIO line is required to drive PERST# line + +NOTE: Two DT nodes may be added for each PCI controller; one for host +mode and another for device mode. So in order for PCI to +work in host mode, EP mode DT node should be disabled and in order to PCI to +work in EP mode, host mode DT node should be disabled. Host mode and EP +mode are mutually exclusive. + +Example: +axi { + compatible = "simple-bus"; + #size-cells = <1>; + #address-cells = <1>; + ranges = <0x51000000 0x51000000 0x3000 + 0x0 0x20000000 0x10000000>; + pcie@51000000 { + compatible = "ti,dra7-pcie"; + reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>; + reg-names = "rc_dbics", "ti_conf", "config"; + interrupts = <0 232 0x4>, <0 233 0x4>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x81000000 0 0 0x03000 0 0x00010000 + 0x82000000 0 0x20013000 0x13000 0 0xffed000>; + #interrupt-cells = <1>; + num-lanes = <1>; + ti,hwmods = "pcie1"; + phys = <&pcie1_phy>; + phy-names = "pcie-phy0"; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc 1>, + <0 0 0 2 &pcie_intc 2>, + <0 0 0 3 &pcie_intc 3>, + <0 0 0 4 &pcie_intc 4>; + pcie_intc: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml b/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml new file mode 100644 index 000000000..53da2edd7 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml @@ -0,0 +1,111 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/toshiba,visconti-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Toshiba Visconti5 SoC PCIe Host Controller + +maintainers: + - Nobuhiro Iwamatsu + +description: + Toshiba Visconti5 SoC PCIe host controller is based on the Synopsys DesignWare PCIe IP. + +allOf: + - $ref: /schemas/pci/snps,dw-pcie.yaml# + +properties: + compatible: + const: toshiba,visconti-pcie + + reg: + items: + - description: Data Bus Interface (DBI) registers. + - description: PCIe configuration space region. + - description: Visconti specific additional registers. + - description: Visconti specific SMU registers + - description: Visconti specific memory protection unit registers (MPU) + + reg-names: + items: + - const: dbi + - const: config + - const: ulreg + - const: smu + - const: mpu + + interrupts: + maxItems: 2 + + clocks: + items: + - description: PCIe reference clock + - description: PCIe system clock + - description: Auxiliary clock + + clock-names: + items: + - const: ref + - const: core + - const: aux + + num-lanes: + const: 2 + +required: + - reg + - reg-names + - interrupts + - "#interrupt-cells" + - interrupt-map + - interrupt-map-mask + - num-lanes + - clocks + - clock-names + - max-link-speed + +unevaluatedProperties: false + +examples: + - | + #include + #include + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie: pcie@28400000 { + compatible = "toshiba,visconti-pcie"; + reg = <0x0 0x28400000 0x0 0x00400000>, + <0x0 0x70000000 0x0 0x10000000>, + <0x0 0x28050000 0x0 0x00010000>, + <0x0 0x24200000 0x0 0x00002000>, + <0x0 0x24162000 0x0 0x00001000>; + reg-names = "dbi", "config", "ulreg", "smu", "mpu"; + device_type = "pci"; + bus-range = <0x00 0xff>; + num-lanes = <2>; + num-viewport = <8>; + + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x81000000 0 0x40000000 0 0x40000000 0 0x00010000>, + <0x82000000 0 0x50000000 0 0x50000000 0 0x20000000>; + interrupts = , + ; + interrupt-names = "msi", "intr"; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = + <0 0 0 1 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH + 0 0 0 2 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH + 0 0 0 3 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH + 0 0 0 4 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&extclk100mhz>, <&clk600mhz>, <&clk25mhz>; + clock-names = "ref", "core", "aux"; + max-link-speed = <2>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt b/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt new file mode 100644 index 000000000..11063293f --- /dev/null +++ b/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt @@ -0,0 +1,76 @@ +V3 Semiconductor V360 EPC PCI bridge + +This bridge is found in the ARM Integrator/AP (Application Platform) + +Required properties: +- compatible: should be one of: + "v3,v360epc-pci" + "arm,integrator-ap-pci", "v3,v360epc-pci" +- reg: should contain two register areas: + first the base address of the V3 host bridge controller, 64KB + second the configuration area register space, 16MB +- interrupts: should contain a reference to the V3 error interrupt + as routed on the system. +- bus-range: see pci.txt +- ranges: this follows the standard PCI bindings in the IEEE Std + 1275-1994 (see pci.txt) with the following restriction: + - The non-prefetchable and prefetchable memory windows must + each be exactly 256MB (0x10000000) in size. + - The prefetchable memory window must be immediately adjacent + to the non-prefetcable memory window +- dma-ranges: three ranges for the inbound memory region. The ranges must + be aligned to a 1MB boundary, and may be 1MB, 2MB, 4MB, 8MB, 16MB, 32MB, + 64MB, 128MB, 256MB, 512MB, 1GB or 2GB in size. The memory should be marked + as pre-fetchable. Two ranges are supported by the hardware. + +Integrator-specific required properties: +- syscon: should contain a link to the syscon device node, since + on the Integrator, some registers in the syscon are required to + operate the V3 host bridge. + +Example: + +pci: pciv3@62000000 { + compatible = "arm,integrator-ap-pci", "v3,v360epc-pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0x62000000 0x10000>, <0x61000000 0x01000000>; + interrupt-parent = <&pic>; + interrupts = <17>; /* Bus error IRQ */ + clocks = <&pciclk>; + bus-range = <0x00 0xff>; + ranges = 0x01000000 0 0x00000000 /* I/O space @00000000 */ + 0x60000000 0 0x01000000 /* 16 MiB @ LB 60000000 */ + 0x02000000 0 0x40000000 /* non-prefectable memory @40000000 */ + 0x40000000 0 0x10000000 /* 256 MiB @ LB 40000000 1:1 */ + 0x42000000 0 0x50000000 /* prefetchable memory @50000000 */ + 0x50000000 0 0x10000000>; /* 256 MiB @ LB 50000000 1:1 */ + dma-ranges = <0x02000000 0 0x20000000 /* EBI memory space */ + 0x20000000 0 0x20000000 /* 512 MB @ LB 20000000 1:1 */ + 0x02000000 0 0x80000000 /* Core module alias memory */ + 0x80000000 0 0x40000000>; /* 1GB @ LB 80000000 */ + interrupt-map-mask = <0xf800 0 0 0x7>; + interrupt-map = < + /* IDSEL 9 */ + 0x4800 0 0 1 &pic 13 /* INT A on slot 9 is irq 13 */ + 0x4800 0 0 2 &pic 14 /* INT B on slot 9 is irq 14 */ + 0x4800 0 0 3 &pic 15 /* INT C on slot 9 is irq 15 */ + 0x4800 0 0 4 &pic 16 /* INT D on slot 9 is irq 16 */ + /* IDSEL 10 */ + 0x5000 0 0 1 &pic 14 /* INT A on slot 10 is irq 14 */ + 0x5000 0 0 2 &pic 15 /* INT B on slot 10 is irq 15 */ + 0x5000 0 0 3 &pic 16 /* INT C on slot 10 is irq 16 */ + 0x5000 0 0 4 &pic 13 /* INT D on slot 10 is irq 13 */ + /* IDSEL 11 */ + 0x5800 0 0 1 &pic 15 /* INT A on slot 11 is irq 15 */ + 0x5800 0 0 2 &pic 16 /* INT B on slot 11 is irq 16 */ + 0x5800 0 0 3 &pic 13 /* INT C on slot 11 is irq 13 */ + 0x5800 0 0 4 &pic 14 /* INT D on slot 11 is irq 14 */ + /* IDSEL 12 */ + 0x6000 0 0 1 &pic 16 /* INT A on slot 12 is irq 16 */ + 0x6000 0 0 2 &pic 13 /* INT B on slot 12 is irq 13 */ + 0x6000 0 0 3 &pic 14 /* INT C on slot 12 is irq 14 */ + 0x6000 0 0 4 &pic 15 /* INT D on slot 12 is irq 15 */ + >; +}; diff --git a/Documentation/devicetree/bindings/pci/versatile.yaml b/Documentation/devicetree/bindings/pci/versatile.yaml new file mode 100644 index 000000000..09748ef6b --- /dev/null +++ b/Documentation/devicetree/bindings/pci/versatile.yaml @@ -0,0 +1,94 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/versatile.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Versatile Platform Baseboard PCI interface + +maintainers: + - Rob Herring + +description: |+ + PCI host controller found on the ARM Versatile PB board's FPGA. + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + +properties: + compatible: + const: arm,versatile-pci + + reg: + items: + - description: Versatile-specific registers + - description: Self Config space + - description: Config space + + ranges: + maxItems: 3 + + "#interrupt-cells": true + + interrupt-map: + maxItems: 16 + + interrupt-map-mask: + items: + - const: 0x1800 + - const: 0 + - const: 0 + - const: 7 + +required: + - compatible + - reg + - ranges + - "#interrupt-cells" + - interrupt-map + - interrupt-map-mask + +unevaluatedProperties: false + +examples: + - | + pci@10001000 { + compatible = "arm,versatile-pci"; + device_type = "pci"; + reg = <0x10001000 0x1000>, + <0x41000000 0x10000>, + <0x42000000 0x100000>; + bus-range = <0 0xff>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + + ranges = + <0x01000000 0 0x00000000 0x43000000 0 0x00010000>, /* downstream I/O */ + <0x02000000 0 0x50000000 0x50000000 0 0x10000000>, /* non-prefetchable memory */ + <0x42000000 0 0x60000000 0x60000000 0 0x10000000>; /* prefetchable memory */ + + interrupt-map-mask = <0x1800 0 0 7>; + interrupt-map = <0x1800 0 0 1 &sic 28>, + <0x1800 0 0 2 &sic 29>, + <0x1800 0 0 3 &sic 30>, + <0x1800 0 0 4 &sic 27>, + + <0x1000 0 0 1 &sic 27>, + <0x1000 0 0 2 &sic 28>, + <0x1000 0 0 3 &sic 29>, + <0x1000 0 0 4 &sic 30>, + + <0x0800 0 0 1 &sic 30>, + <0x0800 0 0 2 &sic 27>, + <0x0800 0 0 3 &sic 28>, + <0x0800 0 0 4 &sic 29>, + + <0x0000 0 0 1 &sic 29>, + <0x0000 0 0 2 &sic 30>, + <0x0000 0 0 3 &sic 27>, + <0x0000 0 0 4 &sic 28>; + }; + + +... diff --git a/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt b/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt new file mode 100644 index 000000000..85d9b9523 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt @@ -0,0 +1,68 @@ +* AppliedMicro X-Gene v1 PCIe MSI controller + +Required properties: + +- compatible: should be "apm,xgene1-msi" to identify + X-Gene v1 PCIe MSI controller block. +- msi-controller: indicates that this is an X-Gene v1 PCIe MSI controller node +- reg: physical base address (0x79000000) and length (0x900000) for controller + registers. These registers include the MSI termination address and data + registers as well as the MSI interrupt status registers. +- reg-names: not required +- interrupts: A list of 16 interrupt outputs of the controller, starting from + interrupt number 0x10 to 0x1f. +- interrupt-names: not required + +Each PCIe node needs to have property msi-parent that points to an MSI +controller node + +Examples: + +SoC DTSI: + + + MSI node: + msi@79000000 { + compatible = "apm,xgene1-msi"; + msi-controller; + reg = <0x00 0x79000000 0x0 0x900000>; + interrupts = <0x0 0x10 0x4> + <0x0 0x11 0x4> + <0x0 0x12 0x4> + <0x0 0x13 0x4> + <0x0 0x14 0x4> + <0x0 0x15 0x4> + <0x0 0x16 0x4> + <0x0 0x17 0x4> + <0x0 0x18 0x4> + <0x0 0x19 0x4> + <0x0 0x1a 0x4> + <0x0 0x1b 0x4> + <0x0 0x1c 0x4> + <0x0 0x1d 0x4> + <0x0 0x1e 0x4> + <0x0 0x1f 0x4>; + }; + + + PCIe controller node with msi-parent property pointing to MSI node: + pcie0: pcie@1f2b0000 { + device_type = "pci"; + compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = < 0x00 0x1f2b0000 0x0 0x00010000 /* Controller registers */ + 0xe0 0xd0000000 0x0 0x00040000>; /* PCI config space */ + reg-names = "csr", "cfg"; + ranges = <0x01000000 0x00 0x00000000 0xe0 0x10000000 0x00 0x00010000 /* io */ + 0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000>; /* mem */ + dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 + 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1 + 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1 + 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1 + 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>; + dma-coherent; + clocks = <&pcie0clk 0>; + msi-parent= <&msi>; + }; diff --git a/Documentation/devicetree/bindings/pci/xgene-pci.txt b/Documentation/devicetree/bindings/pci/xgene-pci.txt new file mode 100644 index 000000000..92490330d --- /dev/null +++ b/Documentation/devicetree/bindings/pci/xgene-pci.txt @@ -0,0 +1,50 @@ +* AppliedMicro X-Gene PCIe interface + +Required properties: +- device_type: set to "pci" +- compatible: should contain "apm,xgene-pcie" to identify the core. +- reg: A list of physical base address and length for each set of controller + registers. Must contain an entry for each entry in the reg-names + property. +- reg-names: Must include the following entries: + "csr": controller configuration registers. + "cfg": PCIe configuration space registers. +- #address-cells: set to <3> +- #size-cells: set to <2> +- ranges: ranges for the outbound memory, I/O regions. +- dma-ranges: ranges for the inbound memory regions. +- #interrupt-cells: set to <1> +- interrupt-map-mask and interrupt-map: standard PCI properties + to define the mapping of the PCIe interface to interrupt + numbers. +- clocks: from common clock binding: handle to pci clock. + +Optional properties: +- status: Either "ok" or "disabled". +- dma-coherent: Present if DMA operations are coherent + +Example: + + pcie0: pcie@1f2b0000 { + status = "disabled"; + device_type = "pci"; + compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = < 0x00 0x1f2b0000 0x0 0x00010000 /* Controller registers */ + 0xe0 0xd0000000 0x0 0x00040000>; /* PCI config space */ + reg-names = "csr", "cfg"; + ranges = <0x01000000 0x00 0x00000000 0xe0 0x10000000 0x00 0x00010000 /* io */ + 0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000>; /* mem */ + dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 + 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1 + 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1 + 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1 + 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>; + dma-coherent; + clocks = <&pcie0clk 0>; + }; + diff --git a/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt b/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt new file mode 100644 index 000000000..f56f8c58c --- /dev/null +++ b/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt @@ -0,0 +1,73 @@ +* Xilinx NWL PCIe Root Port Bridge DT description + +Required properties: +- compatible: Should contain "xlnx,nwl-pcie-2.11" +- #address-cells: Address representation for root ports, set to <3> +- #size-cells: Size representation for root ports, set to <2> +- #interrupt-cells: specifies the number of cells needed to encode an + interrupt source. The value must be 1. +- reg: Should contain Bridge, PCIe Controller registers location, + configuration space, and length +- reg-names: Must include the following entries: + "breg": bridge registers + "pcireg": PCIe controller registers + "cfg": configuration space region +- device_type: must be "pci" +- interrupts: Should contain NWL PCIe interrupt +- interrupt-names: Must include the following entries: + "msi1, msi0": interrupt asserted when an MSI is received + "intx": interrupt asserted when a legacy interrupt is received + "misc": interrupt asserted when miscellaneous interrupt is received +- interrupt-map-mask and interrupt-map: standard PCI properties to define the + mapping of the PCI interface to interrupt numbers. +- ranges: ranges for the PCI memory regions (I/O space region is not + supported by hardware) + Please refer to the standard PCI bus binding document for a more + detailed explanation +- msi-controller: indicates that this is MSI controller node +- msi-parent: MSI parent of the root complex itself +- legacy-interrupt-controller: Interrupt controller device node for Legacy + interrupts + - interrupt-controller: identifies the node as an interrupt controller + - #interrupt-cells: should be set to 1 + - #address-cells: specifies the number of cells needed to encode an + address. The value must be 0. + +Optional properties: +- dma-coherent: present if DMA operations are coherent +- clocks: Input clock specifier. Refer to common clock bindings + +Example: +++++++++ + +nwl_pcie: pcie@fd0e0000 { + #address-cells = <3>; + #size-cells = <2>; + compatible = "xlnx,nwl-pcie-2.11"; + #interrupt-cells = <1>; + msi-controller; + device_type = "pci"; + interrupt-parent = <&gic>; + interrupts = <0 114 4>, <0 115 4>, <0 116 4>, <0 117 4>, <0 118 4>; + interrupt-names = "msi0", "msi1", "intx", "dummy", "misc"; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc 0x1>, + <0x0 0x0 0x0 0x2 &pcie_intc 0x2>, + <0x0 0x0 0x0 0x3 &pcie_intc 0x3>, + <0x0 0x0 0x0 0x4 &pcie_intc 0x4>; + + msi-parent = <&nwl_pcie>; + reg = <0x0 0xfd0e0000 0x0 0x1000>, + <0x0 0xfd480000 0x0 0x1000>, + <0x80 0x00000000 0x0 0x1000000>; + reg-names = "breg", "pcireg", "cfg"; + ranges = <0x02000000 0x00000000 0xe0000000 0x00000000 0xe0000000 0x00000000 0x10000000 /* non-prefetchable memory */ + 0x43000000 0x00000006 0x00000000 0x00000006 0x00000000 0x00000002 0x00000000>;/* prefetchable memory */ + + pcie_intc: legacy-interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + +}; diff --git a/Documentation/devicetree/bindings/pci/xilinx-pcie.txt b/Documentation/devicetree/bindings/pci/xilinx-pcie.txt new file mode 100644 index 000000000..fd57a8118 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/xilinx-pcie.txt @@ -0,0 +1,88 @@ +* Xilinx AXI PCIe Root Port Bridge DT description + +Required properties: +- #address-cells: Address representation for root ports, set to <3> +- #size-cells: Size representation for root ports, set to <2> +- #interrupt-cells: specifies the number of cells needed to encode an + interrupt source. The value must be 1. +- compatible: Should contain "xlnx,axi-pcie-host-1.00.a" +- reg: Should contain AXI PCIe registers location and length +- device_type: must be "pci" +- interrupts: Should contain AXI PCIe interrupt +- interrupt-map-mask, + interrupt-map: standard PCI properties to define the mapping of the + PCI interface to interrupt numbers. +- ranges: ranges for the PCI memory regions (I/O space region is not + supported by hardware) + Please refer to the standard PCI bus binding document for a more + detailed explanation + +Optional properties for Zynq/Microblaze: +- bus-range: PCI bus numbers covered + +Interrupt controller child node ++++++++++++++++++++++++++++++++ +Required properties: +- interrupt-controller: identifies the node as an interrupt controller +- #address-cells: specifies the number of cells needed to encode an + address. The value must be 0. +- #interrupt-cells: specifies the number of cells needed to encode an + interrupt source. The value must be 1. + +NOTE: +The core provides a single interrupt for both INTx/MSI messages. So, +created a interrupt controller node to support 'interrupt-map' DT +functionality. The driver will create an IRQ domain for this map, decode +the four INTx interrupts in ISR and route them to this domain. + + +Example: +++++++++ +Zynq: + pci_express: axi-pcie@50000000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + compatible = "xlnx,axi-pcie-host-1.00.a"; + reg = < 0x50000000 0x1000000 >; + device_type = "pci"; + interrupts = < 0 52 4 >; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc 1>, + <0 0 0 2 &pcie_intc 2>, + <0 0 0 3 &pcie_intc 3>, + <0 0 0 4 &pcie_intc 4>; + ranges = < 0x02000000 0 0x60000000 0x60000000 0 0x10000000 >; + + pcie_intc: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + + +Microblaze: + pci_express: axi-pcie@10000000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + compatible = "xlnx,axi-pcie-host-1.00.a"; + reg = <0x10000000 0x4000000>; + device_type = "pci"; + interrupt-parent = <µblaze_0_intc>; + interrupts = <1 2>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc 1>, + <0 0 0 2 &pcie_intc 2>, + <0 0 0 3 &pcie_intc 3>, + <0 0 0 4 &pcie_intc 4>; + ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x10000000>; + + pcie_intc: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + + }; diff --git a/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml new file mode 100644 index 000000000..24ddc2855 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml @@ -0,0 +1,134 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/xilinx-versal-cpm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: CPM Host Controller device tree for Xilinx Versal SoCs + +maintainers: + - Bharat Kumar Gogada + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + +properties: + compatible: + enum: + - xlnx,versal-cpm-host-1.00 + - xlnx,versal-cpm5-host + + reg: + items: + - description: CPM system level control and status registers. + - description: Configuration space region and bridge registers. + - description: CPM5 control and status registers. + minItems: 2 + + reg-names: + items: + - const: cpm_slcr + - const: cfg + - const: cpm_csr + minItems: 2 + + interrupts: + maxItems: 1 + + msi-map: + description: + Maps a Requester ID to an MSI controller and associated MSI sideband data. + + ranges: + maxItems: 2 + + "#interrupt-cells": + const: 1 + + interrupt-controller: + description: Interrupt controller node for handling legacy PCI interrupts. + type: object + properties: + "#address-cells": + const: 0 + "#interrupt-cells": + const: 1 + "interrupt-controller": true + additionalProperties: false + +required: + - reg + - reg-names + - "#interrupt-cells" + - interrupts + - interrupt-map + - interrupt-map-mask + - bus-range + - msi-map + - interrupt-controller + +unevaluatedProperties: false + +examples: + - | + + versal { + #address-cells = <2>; + #size-cells = <2>; + cpm_pcie: pcie@fca10000 { + compatible = "xlnx,versal-cpm-host-1.00"; + device_type = "pci"; + #address-cells = <3>; + #interrupt-cells = <1>; + #size-cells = <2>; + interrupts = <0 72 4>; + interrupt-parent = <&gic>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc_0 0>, + <0 0 0 2 &pcie_intc_0 1>, + <0 0 0 3 &pcie_intc_0 2>, + <0 0 0 4 &pcie_intc_0 3>; + bus-range = <0x00 0xff>; + ranges = <0x02000000 0x0 0xe0000000 0x0 0xe0000000 0x0 0x10000000>, + <0x43000000 0x80 0x00000000 0x80 0x00000000 0x0 0x80000000>; + msi-map = <0x0 &its_gic 0x0 0x10000>; + reg = <0x0 0xfca10000 0x0 0x1000>, + <0x6 0x00000000 0x0 0x10000000>; + reg-names = "cpm_slcr", "cfg"; + pcie_intc_0: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + }; + + cpm5_pcie: pcie@fcdd0000 { + compatible = "xlnx,versal-cpm5-host"; + device_type = "pci"; + #address-cells = <3>; + #interrupt-cells = <1>; + #size-cells = <2>; + interrupts = <0 72 4>; + interrupt-parent = <&gic>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc_1 0>, + <0 0 0 2 &pcie_intc_1 1>, + <0 0 0 3 &pcie_intc_1 2>, + <0 0 0 4 &pcie_intc_1 3>; + bus-range = <0x00 0xff>; + ranges = <0x02000000 0x0 0xe0000000 0x0 0xe0000000 0x0 0x10000000>, + <0x43000000 0x80 0x00000000 0x80 0x00000000 0x0 0x80000000>; + msi-map = <0x0 &its_gic 0x0 0x10000>; + reg = <0x00 0xfcdd0000 0x00 0x1000>, + <0x06 0x00000000 0x00 0x1000000>, + <0x00 0xfce20000 0x00 0x1000000>; + reg-names = "cpm_slcr", "cfg", "cpm_csr"; + + pcie_intc_1: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + }; + + }; -- cgit v1.2.3