From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- .../bindings/pinctrl/pinctrl-mt8192.yaml | 183 +++++++++++++++++++++ 1 file changed, 183 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml (limited to 'Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml') diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml new file mode 100644 index 000000000..e0e943e5b --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml @@ -0,0 +1,183 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/pinctrl-mt8192.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek MT8192 Pin Controller + +maintainers: + - Sean Wang + +description: | + The Mediatek's Pin controller is used to control SoC pins. + +properties: + compatible: + const: mediatek,mt8192-pinctrl + + gpio-controller: true + + '#gpio-cells': + description: | + Number of cells in GPIO specifier. Since the generic GPIO binding is used, + the amount of cells must be specified as 2. See the below + mentioned gpio binding representation for description of particular cells. + const: 2 + + gpio-ranges: + description: gpio valid number range. + maxItems: 1 + + gpio-line-names: true + + reg: + description: | + Physical address base for gpio base registers. There are 11 GPIO + physical address base in mt8192. + maxItems: 11 + + reg-names: + description: | + Gpio base register names. + maxItems: 11 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + + interrupts: + description: The interrupt outputs to sysirq. + maxItems: 1 + +#PIN CONFIGURATION NODES +patternProperties: + '-pins$': + type: object + additionalProperties: false + patternProperties: + '^pins': + type: object + description: | + A pinctrl node should contain at least one subnodes representing the + pinctrl groups available on the machine. Each subnode will list the + pins it needs, and how they should be configured, with regard to muxer + configuration, pullups, drive strength, input enable/disable and + input schmitt. + $ref: "pinmux-node.yaml" + + properties: + pinmux: + description: | + Integer array, represents gpio pin number and mux setting. + Supported pin number and mux varies for different SoCs, and are defined + as macros in dt-bindings/pinctrl/-pinfunc.h directly. + + drive-strength: + description: | + It can support some arguments, such as MTK_DRIVE_4mA, MTK_DRIVE_6mA, etc. See + dt-bindings/pinctrl/mt65xx.h. It can only support 2/4/6/8/10/12/14/16mA in mt8192. + enum: [2, 4, 6, 8, 10, 12, 14, 16] + + drive-strength-microamp: + enum: [125, 250, 500, 1000] + + bias-pull-down: + oneOf: + - type: boolean + description: normal pull down. + - enum: [100, 101, 102, 103] + description: PUPD/R1/R0 pull down type. See MTK_PUPD_SET_R1R0_ + defines in dt-bindings/pinctrl/mt65xx.h. + - enum: [200, 201, 202, 203] + description: RSEL pull down type. See MTK_PULL_SET_RSEL_ + defines in dt-bindings/pinctrl/mt65xx.h. + + bias-pull-up: + oneOf: + - type: boolean + description: normal pull up. + - enum: [100, 101, 102, 103] + description: PUPD/R1/R0 pull up type. See MTK_PUPD_SET_R1R0_ + defines in dt-bindings/pinctrl/mt65xx.h. + - enum: [200, 201, 202, 203] + description: RSEL pull up type. See MTK_PULL_SET_RSEL_ + defines in dt-bindings/pinctrl/mt65xx.h. + + bias-disable: true + + output-high: true + + output-low: true + + input-enable: true + + input-disable: true + + input-schmitt-enable: true + + input-schmitt-disable: true + + required: + - pinmux + + additionalProperties: false + +allOf: + - $ref: "pinctrl.yaml#" + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - '#interrupt-cells' + - gpio-controller + - '#gpio-cells' + - gpio-ranges + +additionalProperties: false + +examples: + - | + #include + #include + pio: pinctrl@10005000 { + compatible = "mediatek,mt8192-pinctrl"; + reg = <0x10005000 0x1000>, + <0x11c20000 0x1000>, + <0x11d10000 0x1000>, + <0x11d30000 0x1000>, + <0x11d40000 0x1000>, + <0x11e20000 0x1000>, + <0x11e70000 0x1000>, + <0x11ea0000 0x1000>, + <0x11f20000 0x1000>, + <0x11f30000 0x1000>, + <0x1000b000 0x1000>; + reg-names = "iocfg0", "iocfg_rm", "iocfg_bm", + "iocfg_bl", "iocfg_br", "iocfg_lm", + "iocfg_lb", "iocfg_rt", "iocfg_lt", + "iocfg_tl", "eint"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pio 0 0 220>; + interrupt-controller; + interrupts = ; + #interrupt-cells = <2>; + + spi1-default-pins { + pins-cs-mosi-clk { + pinmux = , + , + ; + bias-disable; + }; + + pins-miso { + pinmux = ; + bias-pull-down; + }; + }; + }; -- cgit v1.2.3