From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- .../virt/kvm/x86/amd-memory-encryption.rst | 446 +++++++++++++++++++++ 1 file changed, 446 insertions(+) create mode 100644 Documentation/virt/kvm/x86/amd-memory-encryption.rst (limited to 'Documentation/virt/kvm/x86/amd-memory-encryption.rst') diff --git a/Documentation/virt/kvm/x86/amd-memory-encryption.rst b/Documentation/virt/kvm/x86/amd-memory-encryption.rst new file mode 100644 index 000000000..935aaeb97 --- /dev/null +++ b/Documentation/virt/kvm/x86/amd-memory-encryption.rst @@ -0,0 +1,446 @@ +.. SPDX-License-Identifier: GPL-2.0 + +====================================== +Secure Encrypted Virtualization (SEV) +====================================== + +Overview +======== + +Secure Encrypted Virtualization (SEV) is a feature found on AMD processors. + +SEV is an extension to the AMD-V architecture which supports running +virtual machines (VMs) under the control of a hypervisor. When enabled, +the memory contents of a VM will be transparently encrypted with a key +unique to that VM. + +The hypervisor can determine the SEV support through the CPUID +instruction. The CPUID function 0x8000001f reports information related +to SEV:: + + 0x8000001f[eax]: + Bit[1] indicates support for SEV + ... + [ecx]: + Bits[31:0] Number of encrypted guests supported simultaneously + +If support for SEV is present, MSR 0xc001_0010 (MSR_AMD64_SYSCFG) and MSR 0xc001_0015 +(MSR_K7_HWCR) can be used to determine if it can be enabled:: + + 0xc001_0010: + Bit[23] 1 = memory encryption can be enabled + 0 = memory encryption can not be enabled + + 0xc001_0015: + Bit[0] 1 = memory encryption can be enabled + 0 = memory encryption can not be enabled + +When SEV support is available, it can be enabled in a specific VM by +setting the SEV bit before executing VMRUN.:: + + VMCB[0x90]: + Bit[1] 1 = SEV is enabled + 0 = SEV is disabled + +SEV hardware uses ASIDs to associate a memory encryption key with a VM. +Hence, the ASID for the SEV-enabled guests must be from 1 to a maximum value +defined in the CPUID 0x8000001f[ecx] field. + +SEV Key Management +================== + +The SEV guest key management is handled by a separate processor called the AMD +Secure Processor (AMD-SP). Firmware running inside the AMD-SP provides a secure +key management interface to perform common hypervisor activities such as +encrypting bootstrap code, snapshot, migrating and debugging the guest. For more +information, see the SEV Key Management spec [api-spec]_ + +The main ioctl to access SEV is KVM_MEMORY_ENCRYPT_OP. If the argument +to KVM_MEMORY_ENCRYPT_OP is NULL, the ioctl returns 0 if SEV is enabled +and ``ENOTTY` if it is disabled (on some older versions of Linux, +the ioctl runs normally even with a NULL argument, and therefore will +likely return ``EFAULT``). If non-NULL, the argument to KVM_MEMORY_ENCRYPT_OP +must be a struct kvm_sev_cmd:: + + struct kvm_sev_cmd { + __u32 id; + __u64 data; + __u32 error; + __u32 sev_fd; + }; + + +The ``id`` field contains the subcommand, and the ``data`` field points to +another struct containing arguments specific to command. The ``sev_fd`` +should point to a file descriptor that is opened on the ``/dev/sev`` +device, if needed (see individual commands). + +On output, ``error`` is zero on success, or an error code. Error codes +are defined in ````. + +KVM implements the following commands to support common lifecycle events of SEV +guests, such as launching, running, snapshotting, migrating and decommissioning. + +1. KVM_SEV_INIT +--------------- + +The KVM_SEV_INIT command is used by the hypervisor to initialize the SEV platform +context. In a typical workflow, this command should be the first command issued. + +The firmware can be initialized either by using its own non-volatile storage or +the OS can manage the NV storage for the firmware using the module parameter +``init_ex_path``. If the file specified by ``init_ex_path`` does not exist or +is invalid, the OS will create or override the file with output from PSP. + +Returns: 0 on success, -negative on error + +2. KVM_SEV_LAUNCH_START +----------------------- + +The KVM_SEV_LAUNCH_START command is used for creating the memory encryption +context. To create the encryption context, user must provide a guest policy, +the owner's public Diffie-Hellman (PDH) key and session information. + +Parameters: struct kvm_sev_launch_start (in/out) + +Returns: 0 on success, -negative on error + +:: + + struct kvm_sev_launch_start { + __u32 handle; /* if zero then firmware creates a new handle */ + __u32 policy; /* guest's policy */ + + __u64 dh_uaddr; /* userspace address pointing to the guest owner's PDH key */ + __u32 dh_len; + + __u64 session_addr; /* userspace address which points to the guest session information */ + __u32 session_len; + }; + +On success, the 'handle' field contains a new handle and on error, a negative value. + +KVM_SEV_LAUNCH_START requires the ``sev_fd`` field to be valid. + +For more details, see SEV spec Section 6.2. + +3. KVM_SEV_LAUNCH_UPDATE_DATA +----------------------------- + +The KVM_SEV_LAUNCH_UPDATE_DATA is used for encrypting a memory region. It also +calculates a measurement of the memory contents. The measurement is a signature +of the memory contents that can be sent to the guest owner as an attestation +that the memory was encrypted correctly by the firmware. + +Parameters (in): struct kvm_sev_launch_update_data + +Returns: 0 on success, -negative on error + +:: + + struct kvm_sev_launch_update { + __u64 uaddr; /* userspace address to be encrypted (must be 16-byte aligned) */ + __u32 len; /* length of the data to be encrypted (must be 16-byte aligned) */ + }; + +For more details, see SEV spec Section 6.3. + +4. KVM_SEV_LAUNCH_MEASURE +------------------------- + +The KVM_SEV_LAUNCH_MEASURE command is used to retrieve the measurement of the +data encrypted by the KVM_SEV_LAUNCH_UPDATE_DATA command. The guest owner may +wait to provide the guest with confidential information until it can verify the +measurement. Since the guest owner knows the initial contents of the guest at +boot, the measurement can be verified by comparing it to what the guest owner +expects. + +If len is zero on entry, the measurement blob length is written to len and +uaddr is unused. + +Parameters (in): struct kvm_sev_launch_measure + +Returns: 0 on success, -negative on error + +:: + + struct kvm_sev_launch_measure { + __u64 uaddr; /* where to copy the measurement */ + __u32 len; /* length of measurement blob */ + }; + +For more details on the measurement verification flow, see SEV spec Section 6.4. + +5. KVM_SEV_LAUNCH_FINISH +------------------------ + +After completion of the launch flow, the KVM_SEV_LAUNCH_FINISH command can be +issued to make the guest ready for the execution. + +Returns: 0 on success, -negative on error + +6. KVM_SEV_GUEST_STATUS +----------------------- + +The KVM_SEV_GUEST_STATUS command is used to retrieve status information about a +SEV-enabled guest. + +Parameters (out): struct kvm_sev_guest_status + +Returns: 0 on success, -negative on error + +:: + + struct kvm_sev_guest_status { + __u32 handle; /* guest handle */ + __u32 policy; /* guest policy */ + __u8 state; /* guest state (see enum below) */ + }; + +SEV guest state: + +:: + + enum { + SEV_STATE_INVALID = 0; + SEV_STATE_LAUNCHING, /* guest is currently being launched */ + SEV_STATE_SECRET, /* guest is being launched and ready to accept the ciphertext data */ + SEV_STATE_RUNNING, /* guest is fully launched and running */ + SEV_STATE_RECEIVING, /* guest is being migrated in from another SEV machine */ + SEV_STATE_SENDING /* guest is getting migrated out to another SEV machine */ + }; + +7. KVM_SEV_DBG_DECRYPT +---------------------- + +The KVM_SEV_DEBUG_DECRYPT command can be used by the hypervisor to request the +firmware to decrypt the data at the given memory region. + +Parameters (in): struct kvm_sev_dbg + +Returns: 0 on success, -negative on error + +:: + + struct kvm_sev_dbg { + __u64 src_uaddr; /* userspace address of data to decrypt */ + __u64 dst_uaddr; /* userspace address of destination */ + __u32 len; /* length of memory region to decrypt */ + }; + +The command returns an error if the guest policy does not allow debugging. + +8. KVM_SEV_DBG_ENCRYPT +---------------------- + +The KVM_SEV_DEBUG_ENCRYPT command can be used by the hypervisor to request the +firmware to encrypt the data at the given memory region. + +Parameters (in): struct kvm_sev_dbg + +Returns: 0 on success, -negative on error + +:: + + struct kvm_sev_dbg { + __u64 src_uaddr; /* userspace address of data to encrypt */ + __u64 dst_uaddr; /* userspace address of destination */ + __u32 len; /* length of memory region to encrypt */ + }; + +The command returns an error if the guest policy does not allow debugging. + +9. KVM_SEV_LAUNCH_SECRET +------------------------ + +The KVM_SEV_LAUNCH_SECRET command can be used by the hypervisor to inject secret +data after the measurement has been validated by the guest owner. + +Parameters (in): struct kvm_sev_launch_secret + +Returns: 0 on success, -negative on error + +:: + + struct kvm_sev_launch_secret { + __u64 hdr_uaddr; /* userspace address containing the packet header */ + __u32 hdr_len; + + __u64 guest_uaddr; /* the guest memory region where the secret should be injected */ + __u32 guest_len; + + __u64 trans_uaddr; /* the hypervisor memory region which contains the secret */ + __u32 trans_len; + }; + +10. KVM_SEV_GET_ATTESTATION_REPORT +---------------------------------- + +The KVM_SEV_GET_ATTESTATION_REPORT command can be used by the hypervisor to query the attestation +report containing the SHA-256 digest of the guest memory and VMSA passed through the KVM_SEV_LAUNCH +commands and signed with the PEK. The digest returned by the command should match the digest +used by the guest owner with the KVM_SEV_LAUNCH_MEASURE. + +If len is zero on entry, the measurement blob length is written to len and +uaddr is unused. + +Parameters (in): struct kvm_sev_attestation + +Returns: 0 on success, -negative on error + +:: + + struct kvm_sev_attestation_report { + __u8 mnonce[16]; /* A random mnonce that will be placed in the report */ + + __u64 uaddr; /* userspace address where the report should be copied */ + __u32 len; + }; + +11. KVM_SEV_SEND_START +---------------------- + +The KVM_SEV_SEND_START command can be used by the hypervisor to create an +outgoing guest encryption context. + +If session_len is zero on entry, the length of the guest session information is +written to session_len and all other fields are not used. + +Parameters (in): struct kvm_sev_send_start + +Returns: 0 on success, -negative on error + +:: + + struct kvm_sev_send_start { + __u32 policy; /* guest policy */ + + __u64 pdh_cert_uaddr; /* platform Diffie-Hellman certificate */ + __u32 pdh_cert_len; + + __u64 plat_certs_uaddr; /* platform certificate chain */ + __u32 plat_certs_len; + + __u64 amd_certs_uaddr; /* AMD certificate */ + __u32 amd_certs_len; + + __u64 session_uaddr; /* Guest session information */ + __u32 session_len; + }; + +12. KVM_SEV_SEND_UPDATE_DATA +---------------------------- + +The KVM_SEV_SEND_UPDATE_DATA command can be used by the hypervisor to encrypt the +outgoing guest memory region with the encryption context creating using +KVM_SEV_SEND_START. + +If hdr_len or trans_len are zero on entry, the length of the packet header and +transport region are written to hdr_len and trans_len respectively, and all +other fields are not used. + +Parameters (in): struct kvm_sev_send_update_data + +Returns: 0 on success, -negative on error + +:: + + struct kvm_sev_launch_send_update_data { + __u64 hdr_uaddr; /* userspace address containing the packet header */ + __u32 hdr_len; + + __u64 guest_uaddr; /* the source memory region to be encrypted */ + __u32 guest_len; + + __u64 trans_uaddr; /* the destination memory region */ + __u32 trans_len; + }; + +13. KVM_SEV_SEND_FINISH +------------------------ + +After completion of the migration flow, the KVM_SEV_SEND_FINISH command can be +issued by the hypervisor to delete the encryption context. + +Returns: 0 on success, -negative on error + +14. KVM_SEV_SEND_CANCEL +------------------------ + +After completion of SEND_START, but before SEND_FINISH, the source VMM can issue the +SEND_CANCEL command to stop a migration. This is necessary so that a cancelled +migration can restart with a new target later. + +Returns: 0 on success, -negative on error + +15. KVM_SEV_RECEIVE_START +------------------------- + +The KVM_SEV_RECEIVE_START command is used for creating the memory encryption +context for an incoming SEV guest. To create the encryption context, the user must +provide a guest policy, the platform public Diffie-Hellman (PDH) key and session +information. + +Parameters: struct kvm_sev_receive_start (in/out) + +Returns: 0 on success, -negative on error + +:: + + struct kvm_sev_receive_start { + __u32 handle; /* if zero then firmware creates a new handle */ + __u32 policy; /* guest's policy */ + + __u64 pdh_uaddr; /* userspace address pointing to the PDH key */ + __u32 pdh_len; + + __u64 session_uaddr; /* userspace address which points to the guest session information */ + __u32 session_len; + }; + +On success, the 'handle' field contains a new handle and on error, a negative value. + +For more details, see SEV spec Section 6.12. + +16. KVM_SEV_RECEIVE_UPDATE_DATA +------------------------------- + +The KVM_SEV_RECEIVE_UPDATE_DATA command can be used by the hypervisor to copy +the incoming buffers into the guest memory region with encryption context +created during the KVM_SEV_RECEIVE_START. + +Parameters (in): struct kvm_sev_receive_update_data + +Returns: 0 on success, -negative on error + +:: + + struct kvm_sev_launch_receive_update_data { + __u64 hdr_uaddr; /* userspace address containing the packet header */ + __u32 hdr_len; + + __u64 guest_uaddr; /* the destination guest memory region */ + __u32 guest_len; + + __u64 trans_uaddr; /* the incoming buffer memory region */ + __u32 trans_len; + }; + +17. KVM_SEV_RECEIVE_FINISH +-------------------------- + +After completion of the migration flow, the KVM_SEV_RECEIVE_FINISH command can be +issued by the hypervisor to make the guest ready for execution. + +Returns: 0 on success, -negative on error + +References +========== + + +See [white-paper]_, [api-spec]_, [amd-apm]_ and [kvm-forum]_ for more info. + +.. [white-paper] http://amd-dev.wpengine.netdna-cdn.com/wordpress/media/2013/12/AMD_Memory_Encryption_Whitepaper_v7-Public.pdf +.. [api-spec] https://support.amd.com/TechDocs/55766_SEV-KM_API_Specification.pdf +.. [amd-apm] https://support.amd.com/TechDocs/24593.pdf (section 15.34) +.. [kvm-forum] https://www.linux-kvm.org/images/7/74/02x08A-Thomas_Lendacky-AMDs_Virtualizatoin_Memory_Encryption_Technology.pdf -- cgit v1.2.3