From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi | 546 +++++++++++++++++++++++++++ 1 file changed, 546 insertions(+) create mode 100644 arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi (limited to 'arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi') diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi new file mode 100644 index 000000000..74a11ccc5 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi @@ -0,0 +1,546 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) 2019-2020 Marek Vasut + */ + +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxaa-pinctrl.dtsi" +#include +#include + +/ { + aliases { + ethernet0 = ðernet0; + ethernet1 = &ksz8851; + rtc0 = &hwrtc; + rtc1 = &rtc; + }; + + memory@c0000000 { + device_type = "memory"; + reg = <0xC0000000 0x40000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mcuram2: mcuram2@10000000 { + compatible = "shared-dma-pool"; + reg = <0x10000000 0x40000>; + no-map; + }; + + vdev0vring0: vdev0vring0@10040000 { + compatible = "shared-dma-pool"; + reg = <0x10040000 0x1000>; + no-map; + }; + + vdev0vring1: vdev0vring1@10041000 { + compatible = "shared-dma-pool"; + reg = <0x10041000 0x1000>; + no-map; + }; + + vdev0buffer: vdev0buffer@10042000 { + compatible = "shared-dma-pool"; + reg = <0x10042000 0x4000>; + no-map; + }; + + mcuram: mcuram@30000000 { + compatible = "shared-dma-pool"; + reg = <0x30000000 0x40000>; + no-map; + }; + + retram: retram@38000000 { + compatible = "shared-dma-pool"; + reg = <0x38000000 0x10000>; + no-map; + }; + }; + + ethernet_vio: vioregulator { + compatible = "regulator-fixed"; + regulator-name = "vio"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpiog 3 GPIO_ACTIVE_LOW>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd>; + }; +}; + +&adc { + vdd-supply = <&vdd>; + vdda-supply = <&vdda>; + vref-supply = <&vdda>; + status = "okay"; +}; + +&adc1 { + channel@0 { + reg = <0>; + st,min-sample-time-ns = <5000>; + }; +}; + +&adc2 { + channel@1 { + reg = <1>; + st,min-sample-time-ns = <5000>; + }; +}; + +&crc1 { + status = "okay"; +}; + +&dac { + pinctrl-names = "default"; + pinctrl-0 = <&dac_ch1_pins_a &dac_ch2_pins_a>; + vref-supply = <&vdda>; + status = "okay"; + + dac1: dac@1 { + status = "okay"; + }; + dac2: dac@2 { + status = "okay"; + }; +}; + +&dts { + status = "okay"; +}; + +ðernet0 { + status = "okay"; + pinctrl-0 = <ðernet0_rmii_pins_c &mco2_pins_a>; + pinctrl-1 = <ðernet0_rmii_sleep_pins_c &mco2_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + phy-mode = "rmii"; + max-speed = <100>; + phy-handle = <&phy0>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + phy0: ethernet-phy@1 { + reg = <1>; + /* LAN8710Ai */ + compatible = "ethernet-phy-id0007.c0f0", + "ethernet-phy-ieee802.3-c22"; + clocks = <&rcc CK_MCO2>; + reset-gpios = <&gpioh 3 GPIO_ACTIVE_LOW>; + reset-assert-us = <500>; + reset-deassert-us = <500>; + smsc,disable-energy-detect; + interrupt-parent = <&gpioi>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + }; + }; +}; + +&fmc { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&fmc_pins_b>; + pinctrl-1 = <&fmc_sleep_pins_b>; + status = "okay"; + + ksz8851: ethernet@1,0 { + compatible = "micrel,ks8851-mll"; + reg = <1 0x0 0x2>, <1 0x2 0x20000>; + interrupt-parent = <&gpioc>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + bank-width = <2>; + + /* Timing values are in nS */ + st,fmc2-ebi-cs-mux-enable; + st,fmc2-ebi-cs-transaction-type = <4>; + st,fmc2-ebi-cs-buswidth = <16>; + st,fmc2-ebi-cs-address-setup-ns = <5>; + st,fmc2-ebi-cs-address-hold-ns = <5>; + st,fmc2-ebi-cs-bus-turnaround-ns = <5>; + st,fmc2-ebi-cs-data-setup-ns = <45>; + st,fmc2-ebi-cs-data-hold-ns = <1>; + st,fmc2-ebi-cs-write-address-setup-ns = <5>; + st,fmc2-ebi-cs-write-address-hold-ns = <5>; + st,fmc2-ebi-cs-write-bus-turnaround-ns = <5>; + st,fmc2-ebi-cs-write-data-setup-ns = <45>; + st,fmc2-ebi-cs-write-data-hold-ns = <1>; + }; +}; + +&gpioa { + gpio-line-names = "", "", "", "", + "", "", "DHCOM-K", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpiob { + gpio-line-names = "", "", "", "", + "", "", "", "", + "DHCOM-Q", "", "", "", + "", "", "", ""; +}; + +&gpioc { + gpio-line-names = "", "", "", "", + "", "", "DHCOM-E", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpiod { + gpio-line-names = "", "", "", "", + "", "", "DHCOM-B", "", + "", "", "", "DHCOM-F", + "DHCOM-D", "", "", ""; +}; + +&gpioe { + gpio-line-names = "", "", "", "", + "", "", "DHCOM-P", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpiof { + gpio-line-names = "", "", "", "DHCOM-A", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpiog { + gpio-line-names = "DHCOM-C", "", "", "", + "", "", "", "", + "DHCOM-L", "", "", "", + "", "", "", ""; +}; + +&gpioh { + gpio-line-names = "", "", "", "", + "", "", "", "DHCOM-N", + "DHCOM-J", "DHCOM-W", "DHCOM-V", "DHCOM-U", + "DHCOM-T", "", "DHCOM-S", ""; +}; + +&gpioi { + gpio-line-names = "DHCOM-G", "DHCOM-O", "DHCOM-H", "DHCOM-I", + "DHCOM-R", "DHCOM-M", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + + hwrtc: rtc@32 { + compatible = "microcrystal,rv8803"; + reg = <0x32>; + }; + + pmic: stpmic@33 { + compatible = "st,stpmic1"; + reg = <0x33>; + interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + status = "okay"; + + regulators { + compatible = "st,stpmic1-regulators"; + ldo1-supply = <&v3v3>; + ldo2-supply = <&v3v3>; + ldo3-supply = <&vdd_ddr>; + ldo5-supply = <&v3v3>; + ldo6-supply = <&v3v3>; + pwr_sw1-supply = <&bst_out>; + pwr_sw2-supply = <&bst_out>; + + vddcore: buck1 { + regulator-name = "vddcore"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd_ddr: buck2 { + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd: buck3 { + regulator-name = "vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + st,mask-reset; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + v3v3: buck4 { + regulator-name = "v3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-over-current-protection; + regulator-initial-mode = <0>; + }; + + vdda: ldo1 { + regulator-name = "vdda"; + regulator-always-on; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + interrupts = ; + }; + + v2v8: ldo2 { + regulator-name = "v2v8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + interrupts = ; + }; + + vtt_ddr: ldo3 { + regulator-name = "vtt_ddr"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <750000>; + regulator-always-on; + regulator-over-current-protection; + }; + + vdd_usb: ldo4 { + regulator-name = "vdd_usb"; + interrupts = ; + }; + + vdd_sd: ldo5 { + regulator-name = "vdd_sd"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + interrupts = ; + regulator-boot-on; + }; + + v1v8: ldo6 { + regulator-name = "v1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + interrupts = ; + }; + + vref_ddr: vref_ddr { + regulator-name = "vref_ddr"; + regulator-always-on; + }; + + bst_out: boost { + regulator-name = "bst_out"; + interrupts = ; + }; + + vbus_otg: pwr_sw1 { + regulator-name = "vbus_otg"; + interrupts = ; + }; + + vbus_sw: pwr_sw2 { + regulator-name = "vbus_sw"; + interrupts = ; + regulator-active-discharge = <1>; + }; + }; + + onkey { + compatible = "st,stpmic1-onkey"; + interrupts = , ; + interrupt-names = "onkey-falling", "onkey-rising"; + power-off-time-sec = <10>; + status = "okay"; + }; + + watchdog { + compatible = "st,stpmic1-wdt"; + status = "disabled"; + }; + }; + + touchscreen@49 { + compatible = "ti,tsc2004"; + reg = <0x49>; + vio-supply = <&v3v3>; + interrupts-extended = <&gpioh 15 IRQ_TYPE_EDGE_FALLING>; + }; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; +}; + +&ipcc { + status = "okay"; +}; + +&iwdg2 { + timeout-sec = <32>; + status = "okay"; +}; + +&m4_rproc { + memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>, + <&vdev0vring1>, <&vdev0buffer>; + mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>; + mbox-names = "vq0", "vq1", "shutdown", "detach"; + interrupt-parent = <&exti>; + interrupts = <68 1>; + status = "okay"; +}; + +&pwr_regulators { + vdd-supply = <&vdd>; + vdd_3v3_usbfs-supply = <&vdd_usb>; +}; + +&qspi { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qspi_clk_pins_a + &qspi_bk1_pins_a + &qspi_cs1_pins_a>; + pinctrl-1 = <&qspi_clk_sleep_pins_a + &qspi_bk1_sleep_pins_a + &qspi_cs1_sleep_pins_a>; + reg = <0x58003000 0x1000>, <0x70000000 0x4000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + flash0: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-rx-bus-width = <4>; + spi-max-frequency = <108000000>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&rcc { + /* Connect MCO2 output to ETH_RX_CLK input via pad-pad connection */ + clocks = <&rcc CK_MCO2>; + clock-names = "ETH_RX_CLK/ETH_REF_CLK"; + + /* + * Set PLL4P output to 100 MHz to supply SDMMC with faster clock, + * set MCO2 output to 50 MHz to supply ETHRX clock with PLL4P/2, + * so that MCO2 behaves as a divider for the ETHRX clock here. + */ + assigned-clocks = <&rcc CK_MCO2>, <&rcc PLL4_P>; + assigned-clock-parents = <&rcc PLL4_P>; + assigned-clock-rates = <50000000>, <100000000>; +}; + +&rng1 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep", "init"; + pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>; + pinctrl-3 = <&sdmmc1_b4_init_pins_a &sdmmc1_dir_init_pins_a>; + cd-gpios = <&gpiog 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + disable-wp; + st,sig-dir; + st,neg-edge; + st,use-ckin; + st,cmd-gpios = <&gpiod 2 0>; + st,ck-gpios = <&gpioc 12 0>; + st,ckin-gpios = <&gpioe 4 0>; + bus-width = <4>; + vmmc-supply = <&vdd_sd>; + status = "okay"; +}; + +&sdmmc1_b4_pins_a { + /* + * SD bus pull-up resistors: + * - optional on SoMs with SD voltage translator + * - mandatory on SoMs without SD voltage translator + */ + pins1 { + bias-pull-up; + }; + pins2 { + bias-pull-up; + }; +}; + +&sdmmc2 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>; + pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a>; + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>; + non-removable; + no-sd; + no-sdio; + st,neg-edge; + bus-width = <8>; + vmmc-supply = <&v3v3>; + vqmmc-supply = <&v3v3>; + mmc-ddr-3_3v; + status = "okay"; +}; + +&sdmmc3 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc3_b4_pins_a>; + pinctrl-1 = <&sdmmc3_b4_od_pins_a>; + pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>; + broken-cd; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&v3v3>; + vqmmc-supply = <&v3v3>; + mmc-ddr-3_3v; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_a>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; +}; -- cgit v1.2.3