From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001
From: Daniel Baumann <daniel.baumann@progress-linux.org>
Date: Sun, 7 Apr 2024 20:49:45 +0200
Subject: Adding upstream version 6.1.76.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
---
 arch/arm/mach-mmp/jasper.c | 185 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 185 insertions(+)
 create mode 100644 arch/arm/mach-mmp/jasper.c

(limited to 'arch/arm/mach-mmp/jasper.c')

diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c
new file mode 100644
index 000000000..2578e176f
--- /dev/null
+++ b/arch/arm/mach-mmp/jasper.c
@@ -0,0 +1,185 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  linux/arch/arm/mach-mmp/jasper.c
+ *
+ *  Support for the Marvell Jasper Development Platform.
+ *
+ *  Copyright (C) 2009-2010 Marvell International Ltd.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/gpio-pxa.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/max8649.h>
+#include <linux/mfd/max8925.h>
+#include <linux/interrupt.h>
+
+#include "irqs.h"
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include "addr-map.h"
+#include "mfp-mmp2.h"
+#include "mmp2.h"
+
+#include "common.h"
+
+#define JASPER_NR_IRQS		(MMP_NR_IRQS + 48)
+
+static unsigned long jasper_pin_config[] __initdata = {
+	/* UART1 */
+	GPIO29_UART1_RXD,
+	GPIO30_UART1_TXD,
+
+	/* UART3 */
+	GPIO51_UART3_RXD,
+	GPIO52_UART3_TXD,
+
+	/* DFI */
+	GPIO168_DFI_D0,
+	GPIO167_DFI_D1,
+	GPIO166_DFI_D2,
+	GPIO165_DFI_D3,
+	GPIO107_DFI_D4,
+	GPIO106_DFI_D5,
+	GPIO105_DFI_D6,
+	GPIO104_DFI_D7,
+	GPIO111_DFI_D8,
+	GPIO164_DFI_D9,
+	GPIO163_DFI_D10,
+	GPIO162_DFI_D11,
+	GPIO161_DFI_D12,
+	GPIO110_DFI_D13,
+	GPIO109_DFI_D14,
+	GPIO108_DFI_D15,
+	GPIO143_ND_nCS0,
+	GPIO144_ND_nCS1,
+	GPIO147_ND_nWE,
+	GPIO148_ND_nRE,
+	GPIO150_ND_ALE,
+	GPIO149_ND_CLE,
+	GPIO112_ND_RDY0,
+	GPIO160_ND_RDY1,
+
+	/* PMIC */
+	PMIC_PMIC_INT | MFP_LPM_EDGE_FALL,
+
+	/* MMC1 */
+	GPIO131_MMC1_DAT3,
+	GPIO132_MMC1_DAT2,
+	GPIO133_MMC1_DAT1,
+	GPIO134_MMC1_DAT0,
+	GPIO136_MMC1_CMD,
+	GPIO139_MMC1_CLK,
+	GPIO140_MMC1_CD,
+	GPIO141_MMC1_WP,
+
+	/* MMC2 */
+	GPIO37_MMC2_DAT3,
+	GPIO38_MMC2_DAT2,
+	GPIO39_MMC2_DAT1,
+	GPIO40_MMC2_DAT0,
+	GPIO41_MMC2_CMD,
+	GPIO42_MMC2_CLK,
+
+	/* MMC3 */
+	GPIO165_MMC3_DAT7,
+	GPIO162_MMC3_DAT6,
+	GPIO166_MMC3_DAT5,
+	GPIO163_MMC3_DAT4,
+	GPIO167_MMC3_DAT3,
+	GPIO164_MMC3_DAT2,
+	GPIO168_MMC3_DAT1,
+	GPIO111_MMC3_DAT0,
+	GPIO112_MMC3_CMD,
+	GPIO151_MMC3_CLK,
+};
+
+static struct pxa_gpio_platform_data mmp2_gpio_pdata = {
+	.irq_base	= MMP_GPIO_TO_IRQ(0),
+};
+
+static struct regulator_consumer_supply max8649_supply[] = {
+	REGULATOR_SUPPLY("vcc_core", NULL),
+};
+
+static struct regulator_init_data max8649_init_data = {
+	.constraints	= {
+		.name		= "vcc_core range",
+		.min_uV		= 1150000,
+		.max_uV		= 1280000,
+		.always_on	= 1,
+		.boot_on	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &max8649_supply[0],
+};
+
+static struct max8649_platform_data jasper_max8649_info = {
+	.mode		= 2,	/* VID1 = 1, VID0 = 0 */
+	.extclk		= 0,
+	.ramp_timing	= MAX8649_RAMP_32MV,
+	.regulator	= &max8649_init_data,
+};
+
+static struct max8925_backlight_pdata jasper_backlight_data = {
+	.dual_string	= 0,
+};
+
+static struct max8925_power_pdata jasper_power_data = {
+	.batt_detect		= 0,	/* can't detect battery by ID pin */
+	.topoff_threshold	= MAX8925_TOPOFF_THR_10PER,
+	.fast_charge		= MAX8925_FCHG_1000MA,
+};
+
+static struct max8925_platform_data jasper_max8925_info = {
+	.backlight		= &jasper_backlight_data,
+	.power			= &jasper_power_data,
+	.irq_base		= MMP_NR_IRQS,
+};
+
+static struct i2c_board_info jasper_twsi1_info[] = {
+	[0] = {
+		.type		= "max8649",
+		.addr		= 0x60,
+		.platform_data	= &jasper_max8649_info,
+	},
+	[1] = {
+		.type		= "max8925",
+		.addr		= 0x3c,
+		.irq		= IRQ_MMP2_PMIC,
+		.platform_data	= &jasper_max8925_info,
+	},
+};
+
+static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc0 = {
+	.clk_delay_cycles = 0x1f,
+};
+
+static void __init jasper_init(void)
+{
+	mfp_config(ARRAY_AND_SIZE(jasper_pin_config));
+
+	/* on-chip devices */
+	mmp2_add_uart(1);
+	mmp2_add_uart(3);
+	mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(jasper_twsi1_info));
+	platform_device_add_data(&mmp2_device_gpio, &mmp2_gpio_pdata,
+				 sizeof(struct pxa_gpio_platform_data));
+	platform_device_register(&mmp2_device_gpio);
+	mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */
+
+	regulator_has_full_constraints();
+}
+
+MACHINE_START(MARVELL_JASPER, "Jasper Development Platform")
+	.map_io		= mmp_map_io,
+	.nr_irqs	= JASPER_NR_IRQS,
+	.init_irq       = mmp2_init_irq,
+	.init_time	= mmp2_timer_init,
+	.init_machine   = jasper_init,
+	.restart	= mmp_restart,
+MACHINE_END
-- 
cgit v1.2.3