From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- arch/arm/mm/cache-l2x0.c | 1825 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1825 insertions(+) create mode 100644 arch/arm/mm/cache-l2x0.c (limited to 'arch/arm/mm/cache-l2x0.c') diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c new file mode 100644 index 000000000..43d91bfd2 --- /dev/null +++ b/arch/arm/mm/cache-l2x0.c @@ -0,0 +1,1825 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * arch/arm/mm/cache-l2x0.c - L210/L220/L310 cache controller support + * + * Copyright (C) 2007 ARM Limited + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include "cache-tauros3.h" + +struct l2c_init_data { + const char *type; + unsigned way_size_0; + unsigned num_lock; + void (*of_parse)(const struct device_node *, u32 *, u32 *); + void (*enable)(void __iomem *, unsigned); + void (*fixup)(void __iomem *, u32, struct outer_cache_fns *); + void (*save)(void __iomem *); + void (*configure)(void __iomem *); + void (*unlock)(void __iomem *, unsigned); + struct outer_cache_fns outer_cache; +}; + +#define CACHE_LINE_SIZE 32 + +static void __iomem *l2x0_base; +static const struct l2c_init_data *l2x0_data; +static DEFINE_RAW_SPINLOCK(l2x0_lock); +static u32 l2x0_way_mask; /* Bitmask of active ways */ +static u32 l2x0_size; +static unsigned long sync_reg_offset = L2X0_CACHE_SYNC; + +struct l2x0_regs l2x0_saved_regs; + +static bool l2x0_bresp_disable; +static bool l2x0_flz_disable; + +/* + * Common code for all cache controllers. + */ +static inline void l2c_wait_mask(void __iomem *reg, unsigned long mask) +{ + /* wait for cache operation by line or way to complete */ + while (readl_relaxed(reg) & mask) + cpu_relax(); +} + +/* + * By default, we write directly to secure registers. Platforms must + * override this if they are running non-secure. + */ +static void l2c_write_sec(unsigned long val, void __iomem *base, unsigned reg) +{ + if (val == readl_relaxed(base + reg)) + return; + if (outer_cache.write_sec) + outer_cache.write_sec(val, reg); + else + writel_relaxed(val, base + reg); +} + +/* + * This should only be called when we have a requirement that the + * register be written due to a work-around, as platforms running + * in non-secure mode may not be able to access this register. + */ +static inline void l2c_set_debug(void __iomem *base, unsigned long val) +{ + l2c_write_sec(val, base, L2X0_DEBUG_CTRL); +} + +static void __l2c_op_way(void __iomem *reg) +{ + writel_relaxed(l2x0_way_mask, reg); + l2c_wait_mask(reg, l2x0_way_mask); +} + +static inline void l2c_unlock(void __iomem *base, unsigned num) +{ + unsigned i; + + for (i = 0; i < num; i++) { + writel_relaxed(0, base + L2X0_LOCKDOWN_WAY_D_BASE + + i * L2X0_LOCKDOWN_STRIDE); + writel_relaxed(0, base + L2X0_LOCKDOWN_WAY_I_BASE + + i * L2X0_LOCKDOWN_STRIDE); + } +} + +static void l2c_configure(void __iomem *base) +{ + l2c_write_sec(l2x0_saved_regs.aux_ctrl, base, L2X0_AUX_CTRL); +} + +/* + * Enable the L2 cache controller. This function must only be + * called when the cache controller is known to be disabled. + */ +static void l2c_enable(void __iomem *base, unsigned num_lock) +{ + unsigned long flags; + + if (outer_cache.configure) + outer_cache.configure(&l2x0_saved_regs); + else + l2x0_data->configure(base); + + l2x0_data->unlock(base, num_lock); + + local_irq_save(flags); + __l2c_op_way(base + L2X0_INV_WAY); + writel_relaxed(0, base + sync_reg_offset); + l2c_wait_mask(base + sync_reg_offset, 1); + local_irq_restore(flags); + + l2c_write_sec(L2X0_CTRL_EN, base, L2X0_CTRL); +} + +static void l2c_disable(void) +{ + void __iomem *base = l2x0_base; + + l2x0_pmu_suspend(); + + outer_cache.flush_all(); + l2c_write_sec(0, base, L2X0_CTRL); + dsb(st); +} + +static void l2c_save(void __iomem *base) +{ + l2x0_saved_regs.aux_ctrl = readl_relaxed(l2x0_base + L2X0_AUX_CTRL); +} + +static void l2c_resume(void) +{ + void __iomem *base = l2x0_base; + + /* Do not touch the controller if already enabled. */ + if (!(readl_relaxed(base + L2X0_CTRL) & L2X0_CTRL_EN)) + l2c_enable(base, l2x0_data->num_lock); + + l2x0_pmu_resume(); +} + +/* + * L2C-210 specific code. + * + * The L2C-2x0 PA, set/way and sync operations are atomic, but we must + * ensure that no background operation is running. The way operations + * are all background tasks. + * + * While a background operation is in progress, any new operation is + * ignored (unspecified whether this causes an error.) Thankfully, not + * used on SMP. + * + * Never has a different sync register other than L2X0_CACHE_SYNC, but + * we use sync_reg_offset here so we can share some of this with L2C-310. + */ +static void __l2c210_cache_sync(void __iomem *base) +{ + writel_relaxed(0, base + sync_reg_offset); +} + +static void __l2c210_op_pa_range(void __iomem *reg, unsigned long start, + unsigned long end) +{ + while (start < end) { + writel_relaxed(start, reg); + start += CACHE_LINE_SIZE; + } +} + +static void l2c210_inv_range(unsigned long start, unsigned long end) +{ + void __iomem *base = l2x0_base; + + if (start & (CACHE_LINE_SIZE - 1)) { + start &= ~(CACHE_LINE_SIZE - 1); + writel_relaxed(start, base + L2X0_CLEAN_INV_LINE_PA); + start += CACHE_LINE_SIZE; + } + + if (end & (CACHE_LINE_SIZE - 1)) { + end &= ~(CACHE_LINE_SIZE - 1); + writel_relaxed(end, base + L2X0_CLEAN_INV_LINE_PA); + } + + __l2c210_op_pa_range(base + L2X0_INV_LINE_PA, start, end); + __l2c210_cache_sync(base); +} + +static void l2c210_clean_range(unsigned long start, unsigned long end) +{ + void __iomem *base = l2x0_base; + + start &= ~(CACHE_LINE_SIZE - 1); + __l2c210_op_pa_range(base + L2X0_CLEAN_LINE_PA, start, end); + __l2c210_cache_sync(base); +} + +static void l2c210_flush_range(unsigned long start, unsigned long end) +{ + void __iomem *base = l2x0_base; + + start &= ~(CACHE_LINE_SIZE - 1); + __l2c210_op_pa_range(base + L2X0_CLEAN_INV_LINE_PA, start, end); + __l2c210_cache_sync(base); +} + +static void l2c210_flush_all(void) +{ + void __iomem *base = l2x0_base; + + BUG_ON(!irqs_disabled()); + + __l2c_op_way(base + L2X0_CLEAN_INV_WAY); + __l2c210_cache_sync(base); +} + +static void l2c210_sync(void) +{ + __l2c210_cache_sync(l2x0_base); +} + +static const struct l2c_init_data l2c210_data __initconst = { + .type = "L2C-210", + .way_size_0 = SZ_8K, + .num_lock = 1, + .enable = l2c_enable, + .save = l2c_save, + .configure = l2c_configure, + .unlock = l2c_unlock, + .outer_cache = { + .inv_range = l2c210_inv_range, + .clean_range = l2c210_clean_range, + .flush_range = l2c210_flush_range, + .flush_all = l2c210_flush_all, + .disable = l2c_disable, + .sync = l2c210_sync, + .resume = l2c_resume, + }, +}; + +/* + * L2C-220 specific code. + * + * All operations are background operations: they have to be waited for. + * Conflicting requests generate a slave error (which will cause an + * imprecise abort.) Never uses sync_reg_offset, so we hard-code the + * sync register here. + * + * However, we can re-use the l2c210_resume call. + */ +static inline void __l2c220_cache_sync(void __iomem *base) +{ + writel_relaxed(0, base + L2X0_CACHE_SYNC); + l2c_wait_mask(base + L2X0_CACHE_SYNC, 1); +} + +static void l2c220_op_way(void __iomem *base, unsigned reg) +{ + unsigned long flags; + + raw_spin_lock_irqsave(&l2x0_lock, flags); + __l2c_op_way(base + reg); + __l2c220_cache_sync(base); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); +} + +static unsigned long l2c220_op_pa_range(void __iomem *reg, unsigned long start, + unsigned long end, unsigned long flags) +{ + raw_spinlock_t *lock = &l2x0_lock; + + while (start < end) { + unsigned long blk_end = start + min(end - start, 4096UL); + + while (start < blk_end) { + l2c_wait_mask(reg, 1); + writel_relaxed(start, reg); + start += CACHE_LINE_SIZE; + } + + if (blk_end < end) { + raw_spin_unlock_irqrestore(lock, flags); + raw_spin_lock_irqsave(lock, flags); + } + } + + return flags; +} + +static void l2c220_inv_range(unsigned long start, unsigned long end) +{ + void __iomem *base = l2x0_base; + unsigned long flags; + + raw_spin_lock_irqsave(&l2x0_lock, flags); + if ((start | end) & (CACHE_LINE_SIZE - 1)) { + if (start & (CACHE_LINE_SIZE - 1)) { + start &= ~(CACHE_LINE_SIZE - 1); + writel_relaxed(start, base + L2X0_CLEAN_INV_LINE_PA); + start += CACHE_LINE_SIZE; + } + + if (end & (CACHE_LINE_SIZE - 1)) { + end &= ~(CACHE_LINE_SIZE - 1); + l2c_wait_mask(base + L2X0_CLEAN_INV_LINE_PA, 1); + writel_relaxed(end, base + L2X0_CLEAN_INV_LINE_PA); + } + } + + flags = l2c220_op_pa_range(base + L2X0_INV_LINE_PA, + start, end, flags); + l2c_wait_mask(base + L2X0_INV_LINE_PA, 1); + __l2c220_cache_sync(base); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); +} + +static void l2c220_clean_range(unsigned long start, unsigned long end) +{ + void __iomem *base = l2x0_base; + unsigned long flags; + + start &= ~(CACHE_LINE_SIZE - 1); + if ((end - start) >= l2x0_size) { + l2c220_op_way(base, L2X0_CLEAN_WAY); + return; + } + + raw_spin_lock_irqsave(&l2x0_lock, flags); + flags = l2c220_op_pa_range(base + L2X0_CLEAN_LINE_PA, + start, end, flags); + l2c_wait_mask(base + L2X0_CLEAN_INV_LINE_PA, 1); + __l2c220_cache_sync(base); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); +} + +static void l2c220_flush_range(unsigned long start, unsigned long end) +{ + void __iomem *base = l2x0_base; + unsigned long flags; + + start &= ~(CACHE_LINE_SIZE - 1); + if ((end - start) >= l2x0_size) { + l2c220_op_way(base, L2X0_CLEAN_INV_WAY); + return; + } + + raw_spin_lock_irqsave(&l2x0_lock, flags); + flags = l2c220_op_pa_range(base + L2X0_CLEAN_INV_LINE_PA, + start, end, flags); + l2c_wait_mask(base + L2X0_CLEAN_INV_LINE_PA, 1); + __l2c220_cache_sync(base); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); +} + +static void l2c220_flush_all(void) +{ + l2c220_op_way(l2x0_base, L2X0_CLEAN_INV_WAY); +} + +static void l2c220_sync(void) +{ + unsigned long flags; + + raw_spin_lock_irqsave(&l2x0_lock, flags); + __l2c220_cache_sync(l2x0_base); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); +} + +static void l2c220_enable(void __iomem *base, unsigned num_lock) +{ + /* + * Always enable non-secure access to the lockdown registers - + * we write to them as part of the L2C enable sequence so they + * need to be accessible. + */ + l2x0_saved_regs.aux_ctrl |= L220_AUX_CTRL_NS_LOCKDOWN; + + l2c_enable(base, num_lock); +} + +static void l2c220_unlock(void __iomem *base, unsigned num_lock) +{ + if (readl_relaxed(base + L2X0_AUX_CTRL) & L220_AUX_CTRL_NS_LOCKDOWN) + l2c_unlock(base, num_lock); +} + +static const struct l2c_init_data l2c220_data = { + .type = "L2C-220", + .way_size_0 = SZ_8K, + .num_lock = 1, + .enable = l2c220_enable, + .save = l2c_save, + .configure = l2c_configure, + .unlock = l2c220_unlock, + .outer_cache = { + .inv_range = l2c220_inv_range, + .clean_range = l2c220_clean_range, + .flush_range = l2c220_flush_range, + .flush_all = l2c220_flush_all, + .disable = l2c_disable, + .sync = l2c220_sync, + .resume = l2c_resume, + }, +}; + +/* + * L2C-310 specific code. + * + * Very similar to L2C-210, the PA, set/way and sync operations are atomic, + * and the way operations are all background tasks. However, issuing an + * operation while a background operation is in progress results in a + * SLVERR response. We can reuse: + * + * __l2c210_cache_sync (using sync_reg_offset) + * l2c210_sync + * l2c210_inv_range (if 588369 is not applicable) + * l2c210_clean_range + * l2c210_flush_range (if 588369 is not applicable) + * l2c210_flush_all (if 727915 is not applicable) + * + * Errata: + * 588369: PL310 R0P0->R1P0, fixed R2P0. + * Affects: all clean+invalidate operations + * clean and invalidate skips the invalidate step, so we need to issue + * separate operations. We also require the above debug workaround + * enclosing this code fragment on affected parts. On unaffected parts, + * we must not use this workaround without the debug register writes + * to avoid exposing a problem similar to 727915. + * + * 727915: PL310 R2P0->R3P0, fixed R3P1. + * Affects: clean+invalidate by way + * clean and invalidate by way runs in the background, and a store can + * hit the line between the clean operation and invalidate operation, + * resulting in the store being lost. + * + * 752271: PL310 R3P0->R3P1-50REL0, fixed R3P2. + * Affects: 8x64-bit (double fill) line fetches + * double fill line fetches can fail to cause dirty data to be evicted + * from the cache before the new data overwrites the second line. + * + * 753970: PL310 R3P0, fixed R3P1. + * Affects: sync + * prevents merging writes after the sync operation, until another L2C + * operation is performed (or a number of other conditions.) + * + * 769419: PL310 R0P0->R3P1, fixed R3P2. + * Affects: store buffer + * store buffer is not automatically drained. + */ +static void l2c310_inv_range_erratum(unsigned long start, unsigned long end) +{ + void __iomem *base = l2x0_base; + + if ((start | end) & (CACHE_LINE_SIZE - 1)) { + unsigned long flags; + + /* Erratum 588369 for both clean+invalidate operations */ + raw_spin_lock_irqsave(&l2x0_lock, flags); + l2c_set_debug(base, 0x03); + + if (start & (CACHE_LINE_SIZE - 1)) { + start &= ~(CACHE_LINE_SIZE - 1); + writel_relaxed(start, base + L2X0_CLEAN_LINE_PA); + writel_relaxed(start, base + L2X0_INV_LINE_PA); + start += CACHE_LINE_SIZE; + } + + if (end & (CACHE_LINE_SIZE - 1)) { + end &= ~(CACHE_LINE_SIZE - 1); + writel_relaxed(end, base + L2X0_CLEAN_LINE_PA); + writel_relaxed(end, base + L2X0_INV_LINE_PA); + } + + l2c_set_debug(base, 0x00); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); + } + + __l2c210_op_pa_range(base + L2X0_INV_LINE_PA, start, end); + __l2c210_cache_sync(base); +} + +static void l2c310_flush_range_erratum(unsigned long start, unsigned long end) +{ + raw_spinlock_t *lock = &l2x0_lock; + unsigned long flags; + void __iomem *base = l2x0_base; + + raw_spin_lock_irqsave(lock, flags); + while (start < end) { + unsigned long blk_end = start + min(end - start, 4096UL); + + l2c_set_debug(base, 0x03); + while (start < blk_end) { + writel_relaxed(start, base + L2X0_CLEAN_LINE_PA); + writel_relaxed(start, base + L2X0_INV_LINE_PA); + start += CACHE_LINE_SIZE; + } + l2c_set_debug(base, 0x00); + + if (blk_end < end) { + raw_spin_unlock_irqrestore(lock, flags); + raw_spin_lock_irqsave(lock, flags); + } + } + raw_spin_unlock_irqrestore(lock, flags); + __l2c210_cache_sync(base); +} + +static void l2c310_flush_all_erratum(void) +{ + void __iomem *base = l2x0_base; + unsigned long flags; + + raw_spin_lock_irqsave(&l2x0_lock, flags); + l2c_set_debug(base, 0x03); + __l2c_op_way(base + L2X0_CLEAN_INV_WAY); + l2c_set_debug(base, 0x00); + __l2c210_cache_sync(base); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); +} + +static void __init l2c310_save(void __iomem *base) +{ + unsigned revision; + + l2c_save(base); + + l2x0_saved_regs.tag_latency = readl_relaxed(base + + L310_TAG_LATENCY_CTRL); + l2x0_saved_regs.data_latency = readl_relaxed(base + + L310_DATA_LATENCY_CTRL); + l2x0_saved_regs.filter_end = readl_relaxed(base + + L310_ADDR_FILTER_END); + l2x0_saved_regs.filter_start = readl_relaxed(base + + L310_ADDR_FILTER_START); + + revision = readl_relaxed(base + L2X0_CACHE_ID) & + L2X0_CACHE_ID_RTL_MASK; + + /* From r2p0, there is Prefetch offset/control register */ + if (revision >= L310_CACHE_ID_RTL_R2P0) + l2x0_saved_regs.prefetch_ctrl = readl_relaxed(base + + L310_PREFETCH_CTRL); + + /* From r3p0, there is Power control register */ + if (revision >= L310_CACHE_ID_RTL_R3P0) + l2x0_saved_regs.pwr_ctrl = readl_relaxed(base + + L310_POWER_CTRL); +} + +static void l2c310_configure(void __iomem *base) +{ + unsigned revision; + + l2c_configure(base); + + /* restore pl310 setup */ + l2c_write_sec(l2x0_saved_regs.tag_latency, base, + L310_TAG_LATENCY_CTRL); + l2c_write_sec(l2x0_saved_regs.data_latency, base, + L310_DATA_LATENCY_CTRL); + l2c_write_sec(l2x0_saved_regs.filter_end, base, + L310_ADDR_FILTER_END); + l2c_write_sec(l2x0_saved_regs.filter_start, base, + L310_ADDR_FILTER_START); + + revision = readl_relaxed(base + L2X0_CACHE_ID) & + L2X0_CACHE_ID_RTL_MASK; + + if (revision >= L310_CACHE_ID_RTL_R2P0) + l2c_write_sec(l2x0_saved_regs.prefetch_ctrl, base, + L310_PREFETCH_CTRL); + if (revision >= L310_CACHE_ID_RTL_R3P0) + l2c_write_sec(l2x0_saved_regs.pwr_ctrl, base, + L310_POWER_CTRL); +} + +static int l2c310_starting_cpu(unsigned int cpu) +{ + set_auxcr(get_auxcr() | BIT(3) | BIT(2) | BIT(1)); + return 0; +} + +static int l2c310_dying_cpu(unsigned int cpu) +{ + set_auxcr(get_auxcr() & ~(BIT(3) | BIT(2) | BIT(1))); + return 0; +} + +static void __init l2c310_enable(void __iomem *base, unsigned num_lock) +{ + unsigned rev = readl_relaxed(base + L2X0_CACHE_ID) & L2X0_CACHE_ID_RTL_MASK; + bool cortex_a9 = read_cpuid_part() == ARM_CPU_PART_CORTEX_A9; + u32 aux = l2x0_saved_regs.aux_ctrl; + + if (rev >= L310_CACHE_ID_RTL_R2P0) { + if (cortex_a9 && !l2x0_bresp_disable) { + aux |= L310_AUX_CTRL_EARLY_BRESP; + pr_info("L2C-310 enabling early BRESP for Cortex-A9\n"); + } else if (aux & L310_AUX_CTRL_EARLY_BRESP) { + pr_warn("L2C-310 early BRESP only supported with Cortex-A9\n"); + aux &= ~L310_AUX_CTRL_EARLY_BRESP; + } + } + + if (cortex_a9 && !l2x0_flz_disable) { + u32 aux_cur = readl_relaxed(base + L2X0_AUX_CTRL); + u32 acr = get_auxcr(); + + pr_debug("Cortex-A9 ACR=0x%08x\n", acr); + + if (acr & BIT(3) && !(aux_cur & L310_AUX_CTRL_FULL_LINE_ZERO)) + pr_err("L2C-310: full line of zeros enabled in Cortex-A9 but not L2C-310 - invalid\n"); + + if (aux & L310_AUX_CTRL_FULL_LINE_ZERO && !(acr & BIT(3))) + pr_err("L2C-310: enabling full line of zeros but not enabled in Cortex-A9\n"); + + if (!(aux & L310_AUX_CTRL_FULL_LINE_ZERO) && !outer_cache.write_sec) { + aux |= L310_AUX_CTRL_FULL_LINE_ZERO; + pr_info("L2C-310 full line of zeros enabled for Cortex-A9\n"); + } + } else if (aux & (L310_AUX_CTRL_FULL_LINE_ZERO | L310_AUX_CTRL_EARLY_BRESP)) { + pr_err("L2C-310: disabling Cortex-A9 specific feature bits\n"); + aux &= ~(L310_AUX_CTRL_FULL_LINE_ZERO | L310_AUX_CTRL_EARLY_BRESP); + } + + /* + * Always enable non-secure access to the lockdown registers - + * we write to them as part of the L2C enable sequence so they + * need to be accessible. + */ + l2x0_saved_regs.aux_ctrl = aux | L310_AUX_CTRL_NS_LOCKDOWN; + + l2c_enable(base, num_lock); + + /* Read back resulting AUX_CTRL value as it could have been altered. */ + aux = readl_relaxed(base + L2X0_AUX_CTRL); + + if (aux & (L310_AUX_CTRL_DATA_PREFETCH | L310_AUX_CTRL_INSTR_PREFETCH)) { + u32 prefetch = readl_relaxed(base + L310_PREFETCH_CTRL); + + pr_info("L2C-310 %s%s prefetch enabled, offset %u lines\n", + aux & L310_AUX_CTRL_INSTR_PREFETCH ? "I" : "", + aux & L310_AUX_CTRL_DATA_PREFETCH ? "D" : "", + 1 + (prefetch & L310_PREFETCH_CTRL_OFFSET_MASK)); + } + + /* r3p0 or later has power control register */ + if (rev >= L310_CACHE_ID_RTL_R3P0) { + u32 power_ctrl; + + power_ctrl = readl_relaxed(base + L310_POWER_CTRL); + pr_info("L2C-310 dynamic clock gating %sabled, standby mode %sabled\n", + power_ctrl & L310_DYNAMIC_CLK_GATING_EN ? "en" : "dis", + power_ctrl & L310_STNDBY_MODE_EN ? "en" : "dis"); + } + + if (aux & L310_AUX_CTRL_FULL_LINE_ZERO) + cpuhp_setup_state(CPUHP_AP_ARM_L2X0_STARTING, + "arm/l2x0:starting", l2c310_starting_cpu, + l2c310_dying_cpu); +} + +static void __init l2c310_fixup(void __iomem *base, u32 cache_id, + struct outer_cache_fns *fns) +{ + unsigned revision = cache_id & L2X0_CACHE_ID_RTL_MASK; + const char *errata[8]; + unsigned n = 0; + + if (IS_ENABLED(CONFIG_PL310_ERRATA_588369) && + revision < L310_CACHE_ID_RTL_R2P0 && + /* For bcm compatibility */ + fns->inv_range == l2c210_inv_range) { + fns->inv_range = l2c310_inv_range_erratum; + fns->flush_range = l2c310_flush_range_erratum; + errata[n++] = "588369"; + } + + if (IS_ENABLED(CONFIG_PL310_ERRATA_727915) && + revision >= L310_CACHE_ID_RTL_R2P0 && + revision < L310_CACHE_ID_RTL_R3P1) { + fns->flush_all = l2c310_flush_all_erratum; + errata[n++] = "727915"; + } + + if (revision >= L310_CACHE_ID_RTL_R3P0 && + revision < L310_CACHE_ID_RTL_R3P2) { + u32 val = l2x0_saved_regs.prefetch_ctrl; + if (val & L310_PREFETCH_CTRL_DBL_LINEFILL) { + val &= ~L310_PREFETCH_CTRL_DBL_LINEFILL; + l2x0_saved_regs.prefetch_ctrl = val; + errata[n++] = "752271"; + } + } + + if (IS_ENABLED(CONFIG_PL310_ERRATA_753970) && + revision == L310_CACHE_ID_RTL_R3P0) { + sync_reg_offset = L2X0_DUMMY_REG; + errata[n++] = "753970"; + } + + if (IS_ENABLED(CONFIG_PL310_ERRATA_769419)) + errata[n++] = "769419"; + + if (n) { + unsigned i; + + pr_info("L2C-310 errat%s", n > 1 ? "a" : "um"); + for (i = 0; i < n; i++) + pr_cont(" %s", errata[i]); + pr_cont(" enabled\n"); + } +} + +static void l2c310_disable(void) +{ + /* + * If full-line-of-zeros is enabled, we must first disable it in the + * Cortex-A9 auxiliary control register before disabling the L2 cache. + */ + if (l2x0_saved_regs.aux_ctrl & L310_AUX_CTRL_FULL_LINE_ZERO) + set_auxcr(get_auxcr() & ~(BIT(3) | BIT(2) | BIT(1))); + + l2c_disable(); +} + +static void l2c310_resume(void) +{ + l2c_resume(); + + /* Re-enable full-line-of-zeros for Cortex-A9 */ + if (l2x0_saved_regs.aux_ctrl & L310_AUX_CTRL_FULL_LINE_ZERO) + set_auxcr(get_auxcr() | BIT(3) | BIT(2) | BIT(1)); +} + +static void l2c310_unlock(void __iomem *base, unsigned num_lock) +{ + if (readl_relaxed(base + L2X0_AUX_CTRL) & L310_AUX_CTRL_NS_LOCKDOWN) + l2c_unlock(base, num_lock); +} + +static const struct l2c_init_data l2c310_init_fns __initconst = { + .type = "L2C-310", + .way_size_0 = SZ_8K, + .num_lock = 8, + .enable = l2c310_enable, + .fixup = l2c310_fixup, + .save = l2c310_save, + .configure = l2c310_configure, + .unlock = l2c310_unlock, + .outer_cache = { + .inv_range = l2c210_inv_range, + .clean_range = l2c210_clean_range, + .flush_range = l2c210_flush_range, + .flush_all = l2c210_flush_all, + .disable = l2c310_disable, + .sync = l2c210_sync, + .resume = l2c310_resume, + }, +}; + +static int __init __l2c_init(const struct l2c_init_data *data, + u32 aux_val, u32 aux_mask, u32 cache_id, bool nosync) +{ + struct outer_cache_fns fns; + unsigned way_size_bits, ways; + u32 aux, old_aux; + + /* + * Save the pointer globally so that callbacks which do not receive + * context from callers can access the structure. + */ + l2x0_data = kmemdup(data, sizeof(*data), GFP_KERNEL); + if (!l2x0_data) + return -ENOMEM; + + /* + * Sanity check the aux values. aux_mask is the bits we preserve + * from reading the hardware register, and aux_val is the bits we + * set. + */ + if (aux_val & aux_mask) + pr_alert("L2C: platform provided aux values permit register corruption.\n"); + + old_aux = aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL); + aux &= aux_mask; + aux |= aux_val; + + if (old_aux != aux) + pr_warn("L2C: DT/platform modifies aux control register: 0x%08x -> 0x%08x\n", + old_aux, aux); + + /* Determine the number of ways */ + switch (cache_id & L2X0_CACHE_ID_PART_MASK) { + case L2X0_CACHE_ID_PART_L310: + if ((aux_val | ~aux_mask) & (L2C_AUX_CTRL_WAY_SIZE_MASK | L310_AUX_CTRL_ASSOCIATIVITY_16)) + pr_warn("L2C: DT/platform tries to modify or specify cache size\n"); + if (aux & (1 << 16)) + ways = 16; + else + ways = 8; + break; + + case L2X0_CACHE_ID_PART_L210: + case L2X0_CACHE_ID_PART_L220: + ways = (aux >> 13) & 0xf; + break; + + case AURORA_CACHE_ID: + ways = (aux >> 13) & 0xf; + ways = 2 << ((ways + 1) >> 2); + break; + + default: + /* Assume unknown chips have 8 ways */ + ways = 8; + break; + } + + l2x0_way_mask = (1 << ways) - 1; + + /* + * way_size_0 is the size that a way_size value of zero would be + * given the calculation: way_size = way_size_0 << way_size_bits. + * So, if way_size_bits=0 is reserved, but way_size_bits=1 is 16k, + * then way_size_0 would be 8k. + * + * L2 cache size = number of ways * way size. + */ + way_size_bits = (aux & L2C_AUX_CTRL_WAY_SIZE_MASK) >> + L2C_AUX_CTRL_WAY_SIZE_SHIFT; + l2x0_size = ways * (data->way_size_0 << way_size_bits); + + fns = data->outer_cache; + fns.write_sec = outer_cache.write_sec; + fns.configure = outer_cache.configure; + if (data->fixup) + data->fixup(l2x0_base, cache_id, &fns); + if (nosync) { + pr_info("L2C: disabling outer sync\n"); + fns.sync = NULL; + } + + /* + * Check if l2x0 controller is already enabled. If we are booting + * in non-secure mode accessing the below registers will fault. + */ + if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) { + l2x0_saved_regs.aux_ctrl = aux; + + data->enable(l2x0_base, data->num_lock); + } + + outer_cache = fns; + + /* + * It is strange to save the register state before initialisation, + * but hey, this is what the DT implementations decided to do. + */ + if (data->save) + data->save(l2x0_base); + + /* Re-read it in case some bits are reserved. */ + aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL); + + pr_info("%s cache controller enabled, %d ways, %d kB\n", + data->type, ways, l2x0_size >> 10); + pr_info("%s: CACHE_ID 0x%08x, AUX_CTRL 0x%08x\n", + data->type, cache_id, aux); + + l2x0_pmu_register(l2x0_base, cache_id); + + return 0; +} + +void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask) +{ + const struct l2c_init_data *data; + u32 cache_id; + + l2x0_base = base; + + cache_id = readl_relaxed(base + L2X0_CACHE_ID); + + switch (cache_id & L2X0_CACHE_ID_PART_MASK) { + default: + case L2X0_CACHE_ID_PART_L210: + data = &l2c210_data; + break; + + case L2X0_CACHE_ID_PART_L220: + data = &l2c220_data; + break; + + case L2X0_CACHE_ID_PART_L310: + data = &l2c310_init_fns; + break; + } + + /* Read back current (default) hardware configuration */ + if (data->save) + data->save(l2x0_base); + + __l2c_init(data, aux_val, aux_mask, cache_id, false); +} + +#ifdef CONFIG_OF +static int l2_wt_override; + +/* Aurora don't have the cache ID register available, so we have to + * pass it though the device tree */ +static u32 cache_id_part_number_from_dt; + +/** + * l2x0_cache_size_of_parse() - read cache size parameters from DT + * @np: the device tree node for the l2 cache + * @aux_val: pointer to machine-supplied auxilary register value, to + * be augmented by the call (bits to be set to 1) + * @aux_mask: pointer to machine-supplied auxilary register mask, to + * be augmented by the call (bits to be set to 0) + * @associativity: variable to return the calculated associativity in + * @max_way_size: the maximum size in bytes for the cache ways + */ +static int __init l2x0_cache_size_of_parse(const struct device_node *np, + u32 *aux_val, u32 *aux_mask, + u32 *associativity, + u32 max_way_size) +{ + u32 mask = 0, val = 0; + u32 cache_size = 0, sets = 0; + u32 way_size_bits = 1; + u32 way_size = 0; + u32 block_size = 0; + u32 line_size = 0; + + of_property_read_u32(np, "cache-size", &cache_size); + of_property_read_u32(np, "cache-sets", &sets); + of_property_read_u32(np, "cache-block-size", &block_size); + of_property_read_u32(np, "cache-line-size", &line_size); + + if (!cache_size || !sets) + return -ENODEV; + + /* All these l2 caches have the same line = block size actually */ + if (!line_size) { + if (block_size) { + /* If linesize is not given, it is equal to blocksize */ + line_size = block_size; + } else { + /* Fall back to known size */ + pr_warn("L2C OF: no cache block/line size given: " + "falling back to default size %d bytes\n", + CACHE_LINE_SIZE); + line_size = CACHE_LINE_SIZE; + } + } + + if (line_size != CACHE_LINE_SIZE) + pr_warn("L2C OF: DT supplied line size %d bytes does " + "not match hardware line size of %d bytes\n", + line_size, + CACHE_LINE_SIZE); + + /* + * Since: + * set size = cache size / sets + * ways = cache size / (sets * line size) + * way size = cache size / (cache size / (sets * line size)) + * way size = sets * line size + * associativity = ways = cache size / way size + */ + way_size = sets * line_size; + *associativity = cache_size / way_size; + + if (way_size > max_way_size) { + pr_err("L2C OF: set size %dKB is too large\n", way_size); + return -EINVAL; + } + + pr_info("L2C OF: override cache size: %d bytes (%dKB)\n", + cache_size, cache_size >> 10); + pr_info("L2C OF: override line size: %d bytes\n", line_size); + pr_info("L2C OF: override way size: %d bytes (%dKB)\n", + way_size, way_size >> 10); + pr_info("L2C OF: override associativity: %d\n", *associativity); + + /* + * Calculates the bits 17:19 to set for way size: + * 512KB -> 6, 256KB -> 5, ... 16KB -> 1 + */ + way_size_bits = ilog2(way_size >> 10) - 3; + if (way_size_bits < 1 || way_size_bits > 6) { + pr_err("L2C OF: cache way size illegal: %dKB is not mapped\n", + way_size); + return -EINVAL; + } + + mask |= L2C_AUX_CTRL_WAY_SIZE_MASK; + val |= (way_size_bits << L2C_AUX_CTRL_WAY_SIZE_SHIFT); + + *aux_val &= ~mask; + *aux_val |= val; + *aux_mask &= ~mask; + + return 0; +} + +static void __init l2x0_of_parse(const struct device_node *np, + u32 *aux_val, u32 *aux_mask) +{ + u32 data[2] = { 0, 0 }; + u32 tag = 0; + u32 dirty = 0; + u32 val = 0, mask = 0; + u32 assoc; + int ret; + + of_property_read_u32(np, "arm,tag-latency", &tag); + if (tag) { + mask |= L2X0_AUX_CTRL_TAG_LATENCY_MASK; + val |= (tag - 1) << L2X0_AUX_CTRL_TAG_LATENCY_SHIFT; + } + + of_property_read_u32_array(np, "arm,data-latency", + data, ARRAY_SIZE(data)); + if (data[0] && data[1]) { + mask |= L2X0_AUX_CTRL_DATA_RD_LATENCY_MASK | + L2X0_AUX_CTRL_DATA_WR_LATENCY_MASK; + val |= ((data[0] - 1) << L2X0_AUX_CTRL_DATA_RD_LATENCY_SHIFT) | + ((data[1] - 1) << L2X0_AUX_CTRL_DATA_WR_LATENCY_SHIFT); + } + + of_property_read_u32(np, "arm,dirty-latency", &dirty); + if (dirty) { + mask |= L2X0_AUX_CTRL_DIRTY_LATENCY_MASK; + val |= (dirty - 1) << L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT; + } + + if (of_property_read_bool(np, "arm,parity-enable")) { + mask &= ~L2C_AUX_CTRL_PARITY_ENABLE; + val |= L2C_AUX_CTRL_PARITY_ENABLE; + } else if (of_property_read_bool(np, "arm,parity-disable")) { + mask &= ~L2C_AUX_CTRL_PARITY_ENABLE; + } + + if (of_property_read_bool(np, "arm,shared-override")) { + mask &= ~L2C_AUX_CTRL_SHARED_OVERRIDE; + val |= L2C_AUX_CTRL_SHARED_OVERRIDE; + } + + ret = l2x0_cache_size_of_parse(np, aux_val, aux_mask, &assoc, SZ_256K); + if (ret) + return; + + if (assoc > 8) { + pr_err("l2x0 of: cache setting yield too high associativity\n"); + pr_err("l2x0 of: %d calculated, max 8\n", assoc); + } else { + mask |= L2X0_AUX_CTRL_ASSOC_MASK; + val |= (assoc << L2X0_AUX_CTRL_ASSOC_SHIFT); + } + + *aux_val &= ~mask; + *aux_val |= val; + *aux_mask &= ~mask; +} + +static const struct l2c_init_data of_l2c210_data __initconst = { + .type = "L2C-210", + .way_size_0 = SZ_8K, + .num_lock = 1, + .of_parse = l2x0_of_parse, + .enable = l2c_enable, + .save = l2c_save, + .configure = l2c_configure, + .unlock = l2c_unlock, + .outer_cache = { + .inv_range = l2c210_inv_range, + .clean_range = l2c210_clean_range, + .flush_range = l2c210_flush_range, + .flush_all = l2c210_flush_all, + .disable = l2c_disable, + .sync = l2c210_sync, + .resume = l2c_resume, + }, +}; + +static const struct l2c_init_data of_l2c220_data __initconst = { + .type = "L2C-220", + .way_size_0 = SZ_8K, + .num_lock = 1, + .of_parse = l2x0_of_parse, + .enable = l2c220_enable, + .save = l2c_save, + .configure = l2c_configure, + .unlock = l2c220_unlock, + .outer_cache = { + .inv_range = l2c220_inv_range, + .clean_range = l2c220_clean_range, + .flush_range = l2c220_flush_range, + .flush_all = l2c220_flush_all, + .disable = l2c_disable, + .sync = l2c220_sync, + .resume = l2c_resume, + }, +}; + +static void __init l2c310_of_parse(const struct device_node *np, + u32 *aux_val, u32 *aux_mask) +{ + u32 data[3] = { 0, 0, 0 }; + u32 tag[3] = { 0, 0, 0 }; + u32 filter[2] = { 0, 0 }; + u32 assoc; + u32 prefetch; + u32 power; + u32 val; + int ret; + + of_property_read_u32_array(np, "arm,tag-latency", tag, ARRAY_SIZE(tag)); + if (tag[0] && tag[1] && tag[2]) + l2x0_saved_regs.tag_latency = + L310_LATENCY_CTRL_RD(tag[0] - 1) | + L310_LATENCY_CTRL_WR(tag[1] - 1) | + L310_LATENCY_CTRL_SETUP(tag[2] - 1); + + of_property_read_u32_array(np, "arm,data-latency", + data, ARRAY_SIZE(data)); + if (data[0] && data[1] && data[2]) + l2x0_saved_regs.data_latency = + L310_LATENCY_CTRL_RD(data[0] - 1) | + L310_LATENCY_CTRL_WR(data[1] - 1) | + L310_LATENCY_CTRL_SETUP(data[2] - 1); + + of_property_read_u32_array(np, "arm,filter-ranges", + filter, ARRAY_SIZE(filter)); + if (filter[1]) { + l2x0_saved_regs.filter_end = + ALIGN(filter[0] + filter[1], SZ_1M); + l2x0_saved_regs.filter_start = (filter[0] & ~(SZ_1M - 1)) + | L310_ADDR_FILTER_EN; + } + + ret = l2x0_cache_size_of_parse(np, aux_val, aux_mask, &assoc, SZ_512K); + if (!ret) { + switch (assoc) { + case 16: + *aux_val &= ~L2X0_AUX_CTRL_ASSOC_MASK; + *aux_val |= L310_AUX_CTRL_ASSOCIATIVITY_16; + *aux_mask &= ~L2X0_AUX_CTRL_ASSOC_MASK; + break; + case 8: + *aux_val &= ~L2X0_AUX_CTRL_ASSOC_MASK; + *aux_mask &= ~L2X0_AUX_CTRL_ASSOC_MASK; + break; + default: + pr_err("L2C-310 OF cache associativity %d invalid, only 8 or 16 permitted\n", + assoc); + break; + } + } + + if (of_property_read_bool(np, "arm,shared-override")) { + *aux_val |= L2C_AUX_CTRL_SHARED_OVERRIDE; + *aux_mask &= ~L2C_AUX_CTRL_SHARED_OVERRIDE; + } + + if (of_property_read_bool(np, "arm,parity-enable")) { + *aux_val |= L2C_AUX_CTRL_PARITY_ENABLE; + *aux_mask &= ~L2C_AUX_CTRL_PARITY_ENABLE; + } else if (of_property_read_bool(np, "arm,parity-disable")) { + *aux_val &= ~L2C_AUX_CTRL_PARITY_ENABLE; + *aux_mask &= ~L2C_AUX_CTRL_PARITY_ENABLE; + } + + if (of_property_read_bool(np, "arm,early-bresp-disable")) + l2x0_bresp_disable = true; + + if (of_property_read_bool(np, "arm,full-line-zero-disable")) + l2x0_flz_disable = true; + + prefetch = l2x0_saved_regs.prefetch_ctrl; + + ret = of_property_read_u32(np, "arm,double-linefill", &val); + if (ret == 0) { + if (val) + prefetch |= L310_PREFETCH_CTRL_DBL_LINEFILL; + else + prefetch &= ~L310_PREFETCH_CTRL_DBL_LINEFILL; + } else if (ret != -EINVAL) { + pr_err("L2C-310 OF arm,double-linefill property value is missing\n"); + } + + ret = of_property_read_u32(np, "arm,double-linefill-incr", &val); + if (ret == 0) { + if (val) + prefetch |= L310_PREFETCH_CTRL_DBL_LINEFILL_INCR; + else + prefetch &= ~L310_PREFETCH_CTRL_DBL_LINEFILL_INCR; + } else if (ret != -EINVAL) { + pr_err("L2C-310 OF arm,double-linefill-incr property value is missing\n"); + } + + ret = of_property_read_u32(np, "arm,double-linefill-wrap", &val); + if (ret == 0) { + if (!val) + prefetch |= L310_PREFETCH_CTRL_DBL_LINEFILL_WRAP; + else + prefetch &= ~L310_PREFETCH_CTRL_DBL_LINEFILL_WRAP; + } else if (ret != -EINVAL) { + pr_err("L2C-310 OF arm,double-linefill-wrap property value is missing\n"); + } + + ret = of_property_read_u32(np, "arm,prefetch-drop", &val); + if (ret == 0) { + if (val) + prefetch |= L310_PREFETCH_CTRL_PREFETCH_DROP; + else + prefetch &= ~L310_PREFETCH_CTRL_PREFETCH_DROP; + } else if (ret != -EINVAL) { + pr_err("L2C-310 OF arm,prefetch-drop property value is missing\n"); + } + + ret = of_property_read_u32(np, "arm,prefetch-offset", &val); + if (ret == 0) { + prefetch &= ~L310_PREFETCH_CTRL_OFFSET_MASK; + prefetch |= val & L310_PREFETCH_CTRL_OFFSET_MASK; + } else if (ret != -EINVAL) { + pr_err("L2C-310 OF arm,prefetch-offset property value is missing\n"); + } + + ret = of_property_read_u32(np, "prefetch-data", &val); + if (ret == 0) { + if (val) { + prefetch |= L310_PREFETCH_CTRL_DATA_PREFETCH; + *aux_val |= L310_PREFETCH_CTRL_DATA_PREFETCH; + } else { + prefetch &= ~L310_PREFETCH_CTRL_DATA_PREFETCH; + *aux_val &= ~L310_PREFETCH_CTRL_DATA_PREFETCH; + } + *aux_mask &= ~L310_PREFETCH_CTRL_DATA_PREFETCH; + } else if (ret != -EINVAL) { + pr_err("L2C-310 OF prefetch-data property value is missing\n"); + } + + ret = of_property_read_u32(np, "prefetch-instr", &val); + if (ret == 0) { + if (val) { + prefetch |= L310_PREFETCH_CTRL_INSTR_PREFETCH; + *aux_val |= L310_PREFETCH_CTRL_INSTR_PREFETCH; + } else { + prefetch &= ~L310_PREFETCH_CTRL_INSTR_PREFETCH; + *aux_val &= ~L310_PREFETCH_CTRL_INSTR_PREFETCH; + } + *aux_mask &= ~L310_PREFETCH_CTRL_INSTR_PREFETCH; + } else if (ret != -EINVAL) { + pr_err("L2C-310 OF prefetch-instr property value is missing\n"); + } + + l2x0_saved_regs.prefetch_ctrl = prefetch; + + power = l2x0_saved_regs.pwr_ctrl | + L310_DYNAMIC_CLK_GATING_EN | L310_STNDBY_MODE_EN; + + ret = of_property_read_u32(np, "arm,dynamic-clock-gating", &val); + if (!ret) { + if (!val) + power &= ~L310_DYNAMIC_CLK_GATING_EN; + } else if (ret != -EINVAL) { + pr_err("L2C-310 OF dynamic-clock-gating property value is missing or invalid\n"); + } + ret = of_property_read_u32(np, "arm,standby-mode", &val); + if (!ret) { + if (!val) + power &= ~L310_STNDBY_MODE_EN; + } else if (ret != -EINVAL) { + pr_err("L2C-310 OF standby-mode property value is missing or invalid\n"); + } + + l2x0_saved_regs.pwr_ctrl = power; +} + +static const struct l2c_init_data of_l2c310_data __initconst = { + .type = "L2C-310", + .way_size_0 = SZ_8K, + .num_lock = 8, + .of_parse = l2c310_of_parse, + .enable = l2c310_enable, + .fixup = l2c310_fixup, + .save = l2c310_save, + .configure = l2c310_configure, + .unlock = l2c310_unlock, + .outer_cache = { + .inv_range = l2c210_inv_range, + .clean_range = l2c210_clean_range, + .flush_range = l2c210_flush_range, + .flush_all = l2c210_flush_all, + .disable = l2c310_disable, + .sync = l2c210_sync, + .resume = l2c310_resume, + }, +}; + +/* + * This is a variant of the of_l2c310_data with .sync set to + * NULL. Outer sync operations are not needed when the system is I/O + * coherent, and potentially harmful in certain situations (PCIe/PL310 + * deadlock on Armada 375/38x due to hardware I/O coherency). The + * other operations are kept because they are infrequent (therefore do + * not cause the deadlock in practice) and needed for secondary CPU + * boot and other power management activities. + */ +static const struct l2c_init_data of_l2c310_coherent_data __initconst = { + .type = "L2C-310 Coherent", + .way_size_0 = SZ_8K, + .num_lock = 8, + .of_parse = l2c310_of_parse, + .enable = l2c310_enable, + .fixup = l2c310_fixup, + .save = l2c310_save, + .configure = l2c310_configure, + .unlock = l2c310_unlock, + .outer_cache = { + .inv_range = l2c210_inv_range, + .clean_range = l2c210_clean_range, + .flush_range = l2c210_flush_range, + .flush_all = l2c210_flush_all, + .disable = l2c310_disable, + .resume = l2c310_resume, + }, +}; + +/* + * Note that the end addresses passed to Linux primitives are + * noninclusive, while the hardware cache range operations use + * inclusive start and end addresses. + */ +static unsigned long aurora_range_end(unsigned long start, unsigned long end) +{ + /* + * Limit the number of cache lines processed at once, + * since cache range operations stall the CPU pipeline + * until completion. + */ + if (end > start + AURORA_MAX_RANGE_SIZE) + end = start + AURORA_MAX_RANGE_SIZE; + + /* + * Cache range operations can't straddle a page boundary. + */ + if (end > PAGE_ALIGN(start+1)) + end = PAGE_ALIGN(start+1); + + return end; +} + +static void aurora_pa_range(unsigned long start, unsigned long end, + unsigned long offset) +{ + void __iomem *base = l2x0_base; + unsigned long range_end; + unsigned long flags; + + /* + * round start and end adresses up to cache line size + */ + start &= ~(CACHE_LINE_SIZE - 1); + end = ALIGN(end, CACHE_LINE_SIZE); + + /* + * perform operation on all full cache lines between 'start' and 'end' + */ + while (start < end) { + range_end = aurora_range_end(start, end); + + raw_spin_lock_irqsave(&l2x0_lock, flags); + writel_relaxed(start, base + AURORA_RANGE_BASE_ADDR_REG); + writel_relaxed(range_end - CACHE_LINE_SIZE, base + offset); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); + + writel_relaxed(0, base + AURORA_SYNC_REG); + start = range_end; + } +} +static void aurora_inv_range(unsigned long start, unsigned long end) +{ + aurora_pa_range(start, end, AURORA_INVAL_RANGE_REG); +} + +static void aurora_clean_range(unsigned long start, unsigned long end) +{ + /* + * If L2 is forced to WT, the L2 will always be clean and we + * don't need to do anything here. + */ + if (!l2_wt_override) + aurora_pa_range(start, end, AURORA_CLEAN_RANGE_REG); +} + +static void aurora_flush_range(unsigned long start, unsigned long end) +{ + if (l2_wt_override) + aurora_pa_range(start, end, AURORA_INVAL_RANGE_REG); + else + aurora_pa_range(start, end, AURORA_FLUSH_RANGE_REG); +} + +static void aurora_flush_all(void) +{ + void __iomem *base = l2x0_base; + unsigned long flags; + + /* clean all ways */ + raw_spin_lock_irqsave(&l2x0_lock, flags); + __l2c_op_way(base + L2X0_CLEAN_INV_WAY); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); + + writel_relaxed(0, base + AURORA_SYNC_REG); +} + +static void aurora_cache_sync(void) +{ + writel_relaxed(0, l2x0_base + AURORA_SYNC_REG); +} + +static void aurora_disable(void) +{ + void __iomem *base = l2x0_base; + unsigned long flags; + + raw_spin_lock_irqsave(&l2x0_lock, flags); + __l2c_op_way(base + L2X0_CLEAN_INV_WAY); + writel_relaxed(0, base + AURORA_SYNC_REG); + l2c_write_sec(0, base, L2X0_CTRL); + dsb(st); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); +} + +static void aurora_save(void __iomem *base) +{ + l2x0_saved_regs.ctrl = readl_relaxed(base + L2X0_CTRL); + l2x0_saved_regs.aux_ctrl = readl_relaxed(base + L2X0_AUX_CTRL); +} + +/* + * For Aurora cache in no outer mode, enable via the CP15 coprocessor + * broadcasting of cache commands to L2. + */ +static void __init aurora_enable_no_outer(void __iomem *base, + unsigned num_lock) +{ + u32 u; + + asm volatile("mrc p15, 1, %0, c15, c2, 0" : "=r" (u)); + u |= AURORA_CTRL_FW; /* Set the FW bit */ + asm volatile("mcr p15, 1, %0, c15, c2, 0" : : "r" (u)); + + isb(); + + l2c_enable(base, num_lock); +} + +static void __init aurora_fixup(void __iomem *base, u32 cache_id, + struct outer_cache_fns *fns) +{ + sync_reg_offset = AURORA_SYNC_REG; +} + +static void __init aurora_of_parse(const struct device_node *np, + u32 *aux_val, u32 *aux_mask) +{ + u32 val = AURORA_ACR_REPLACEMENT_TYPE_SEMIPLRU; + u32 mask = AURORA_ACR_REPLACEMENT_MASK; + + of_property_read_u32(np, "cache-id-part", + &cache_id_part_number_from_dt); + + /* Determine and save the write policy */ + l2_wt_override = of_property_read_bool(np, "wt-override"); + + if (l2_wt_override) { + val |= AURORA_ACR_FORCE_WRITE_THRO_POLICY; + mask |= AURORA_ACR_FORCE_WRITE_POLICY_MASK; + } + + if (of_property_read_bool(np, "marvell,ecc-enable")) { + mask |= AURORA_ACR_ECC_EN; + val |= AURORA_ACR_ECC_EN; + } + + if (of_property_read_bool(np, "arm,parity-enable")) { + mask |= AURORA_ACR_PARITY_EN; + val |= AURORA_ACR_PARITY_EN; + } else if (of_property_read_bool(np, "arm,parity-disable")) { + mask |= AURORA_ACR_PARITY_EN; + } + + *aux_val &= ~mask; + *aux_val |= val; + *aux_mask &= ~mask; +} + +static const struct l2c_init_data of_aurora_with_outer_data __initconst = { + .type = "Aurora", + .way_size_0 = SZ_4K, + .num_lock = 4, + .of_parse = aurora_of_parse, + .enable = l2c_enable, + .fixup = aurora_fixup, + .save = aurora_save, + .configure = l2c_configure, + .unlock = l2c_unlock, + .outer_cache = { + .inv_range = aurora_inv_range, + .clean_range = aurora_clean_range, + .flush_range = aurora_flush_range, + .flush_all = aurora_flush_all, + .disable = aurora_disable, + .sync = aurora_cache_sync, + .resume = l2c_resume, + }, +}; + +static const struct l2c_init_data of_aurora_no_outer_data __initconst = { + .type = "Aurora", + .way_size_0 = SZ_4K, + .num_lock = 4, + .of_parse = aurora_of_parse, + .enable = aurora_enable_no_outer, + .fixup = aurora_fixup, + .save = aurora_save, + .configure = l2c_configure, + .unlock = l2c_unlock, + .outer_cache = { + .resume = l2c_resume, + }, +}; + +/* + * For certain Broadcom SoCs, depending on the address range, different offsets + * need to be added to the address before passing it to L2 for + * invalidation/clean/flush + * + * Section Address Range Offset EMI + * 1 0x00000000 - 0x3FFFFFFF 0x80000000 VC + * 2 0x40000000 - 0xBFFFFFFF 0x40000000 SYS + * 3 0xC0000000 - 0xFFFFFFFF 0x80000000 VC + * + * When the start and end addresses have crossed two different sections, we + * need to break the L2 operation into two, each within its own section. + * For example, if we need to invalidate addresses starts at 0xBFFF0000 and + * ends at 0xC0001000, we need do invalidate 1) 0xBFFF0000 - 0xBFFFFFFF and 2) + * 0xC0000000 - 0xC0001000 + * + * Note 1: + * By breaking a single L2 operation into two, we may potentially suffer some + * performance hit, but keep in mind the cross section case is very rare + * + * Note 2: + * We do not need to handle the case when the start address is in + * Section 1 and the end address is in Section 3, since it is not a valid use + * case + * + * Note 3: + * Section 1 in practical terms can no longer be used on rev A2. Because of + * that the code does not need to handle section 1 at all. + * + */ +#define BCM_SYS_EMI_START_ADDR 0x40000000UL +#define BCM_VC_EMI_SEC3_START_ADDR 0xC0000000UL + +#define BCM_SYS_EMI_OFFSET 0x40000000UL +#define BCM_VC_EMI_OFFSET 0x80000000UL + +static inline int bcm_addr_is_sys_emi(unsigned long addr) +{ + return (addr >= BCM_SYS_EMI_START_ADDR) && + (addr < BCM_VC_EMI_SEC3_START_ADDR); +} + +static inline unsigned long bcm_l2_phys_addr(unsigned long addr) +{ + if (bcm_addr_is_sys_emi(addr)) + return addr + BCM_SYS_EMI_OFFSET; + else + return addr + BCM_VC_EMI_OFFSET; +} + +static void bcm_inv_range(unsigned long start, unsigned long end) +{ + unsigned long new_start, new_end; + + BUG_ON(start < BCM_SYS_EMI_START_ADDR); + + if (unlikely(end <= start)) + return; + + new_start = bcm_l2_phys_addr(start); + new_end = bcm_l2_phys_addr(end); + + /* normal case, no cross section between start and end */ + if (likely(bcm_addr_is_sys_emi(end) || !bcm_addr_is_sys_emi(start))) { + l2c210_inv_range(new_start, new_end); + return; + } + + /* They cross sections, so it can only be a cross from section + * 2 to section 3 + */ + l2c210_inv_range(new_start, + bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR-1)); + l2c210_inv_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR), + new_end); +} + +static void bcm_clean_range(unsigned long start, unsigned long end) +{ + unsigned long new_start, new_end; + + BUG_ON(start < BCM_SYS_EMI_START_ADDR); + + if (unlikely(end <= start)) + return; + + new_start = bcm_l2_phys_addr(start); + new_end = bcm_l2_phys_addr(end); + + /* normal case, no cross section between start and end */ + if (likely(bcm_addr_is_sys_emi(end) || !bcm_addr_is_sys_emi(start))) { + l2c210_clean_range(new_start, new_end); + return; + } + + /* They cross sections, so it can only be a cross from section + * 2 to section 3 + */ + l2c210_clean_range(new_start, + bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR-1)); + l2c210_clean_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR), + new_end); +} + +static void bcm_flush_range(unsigned long start, unsigned long end) +{ + unsigned long new_start, new_end; + + BUG_ON(start < BCM_SYS_EMI_START_ADDR); + + if (unlikely(end <= start)) + return; + + if ((end - start) >= l2x0_size) { + outer_cache.flush_all(); + return; + } + + new_start = bcm_l2_phys_addr(start); + new_end = bcm_l2_phys_addr(end); + + /* normal case, no cross section between start and end */ + if (likely(bcm_addr_is_sys_emi(end) || !bcm_addr_is_sys_emi(start))) { + l2c210_flush_range(new_start, new_end); + return; + } + + /* They cross sections, so it can only be a cross from section + * 2 to section 3 + */ + l2c210_flush_range(new_start, + bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR-1)); + l2c210_flush_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR), + new_end); +} + +/* Broadcom L2C-310 start from ARMs R3P2 or later, and require no fixups */ +static const struct l2c_init_data of_bcm_l2x0_data __initconst = { + .type = "BCM-L2C-310", + .way_size_0 = SZ_8K, + .num_lock = 8, + .of_parse = l2c310_of_parse, + .enable = l2c310_enable, + .save = l2c310_save, + .configure = l2c310_configure, + .unlock = l2c310_unlock, + .outer_cache = { + .inv_range = bcm_inv_range, + .clean_range = bcm_clean_range, + .flush_range = bcm_flush_range, + .flush_all = l2c210_flush_all, + .disable = l2c310_disable, + .sync = l2c210_sync, + .resume = l2c310_resume, + }, +}; + +static void __init tauros3_save(void __iomem *base) +{ + l2c_save(base); + + l2x0_saved_regs.aux2_ctrl = + readl_relaxed(base + TAUROS3_AUX2_CTRL); + l2x0_saved_regs.prefetch_ctrl = + readl_relaxed(base + L310_PREFETCH_CTRL); +} + +static void tauros3_configure(void __iomem *base) +{ + l2c_configure(base); + writel_relaxed(l2x0_saved_regs.aux2_ctrl, + base + TAUROS3_AUX2_CTRL); + writel_relaxed(l2x0_saved_regs.prefetch_ctrl, + base + L310_PREFETCH_CTRL); +} + +static const struct l2c_init_data of_tauros3_data __initconst = { + .type = "Tauros3", + .way_size_0 = SZ_8K, + .num_lock = 8, + .enable = l2c_enable, + .save = tauros3_save, + .configure = tauros3_configure, + .unlock = l2c_unlock, + /* Tauros3 broadcasts L1 cache operations to L2 */ + .outer_cache = { + .resume = l2c_resume, + }, +}; + +#define L2C_ID(name, fns) { .compatible = name, .data = (void *)&fns } +static const struct of_device_id l2x0_ids[] __initconst = { + L2C_ID("arm,l210-cache", of_l2c210_data), + L2C_ID("arm,l220-cache", of_l2c220_data), + L2C_ID("arm,pl310-cache", of_l2c310_data), + L2C_ID("brcm,bcm11351-a2-pl310-cache", of_bcm_l2x0_data), + L2C_ID("marvell,aurora-outer-cache", of_aurora_with_outer_data), + L2C_ID("marvell,aurora-system-cache", of_aurora_no_outer_data), + L2C_ID("marvell,tauros3-cache", of_tauros3_data), + /* Deprecated IDs */ + L2C_ID("bcm,bcm11351-a2-pl310-cache", of_bcm_l2x0_data), + {} +}; + +int __init l2x0_of_init(u32 aux_val, u32 aux_mask) +{ + const struct l2c_init_data *data; + struct device_node *np; + struct resource res; + u32 cache_id, old_aux; + u32 cache_level = 2; + bool nosync = false; + + np = of_find_matching_node(NULL, l2x0_ids); + if (!np) + return -ENODEV; + + if (of_address_to_resource(np, 0, &res)) + return -ENODEV; + + l2x0_base = ioremap(res.start, resource_size(&res)); + if (!l2x0_base) + return -ENOMEM; + + l2x0_saved_regs.phy_base = res.start; + + data = of_match_node(l2x0_ids, np)->data; + + if (of_device_is_compatible(np, "arm,pl310-cache") && + of_property_read_bool(np, "arm,io-coherent")) + data = &of_l2c310_coherent_data; + + old_aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL); + if (old_aux != ((old_aux & aux_mask) | aux_val)) { + pr_warn("L2C: platform modifies aux control register: 0x%08x -> 0x%08x\n", + old_aux, (old_aux & aux_mask) | aux_val); + } else if (aux_mask != ~0U && aux_val != 0) { + pr_alert("L2C: platform provided aux values match the hardware, so have no effect. Please remove them.\n"); + } + + /* All L2 caches are unified, so this property should be specified */ + if (!of_property_read_bool(np, "cache-unified")) + pr_err("L2C: device tree omits to specify unified cache\n"); + + if (of_property_read_u32(np, "cache-level", &cache_level)) + pr_err("L2C: device tree omits to specify cache-level\n"); + + if (cache_level != 2) + pr_err("L2C: device tree specifies invalid cache level\n"); + + nosync = of_property_read_bool(np, "arm,outer-sync-disable"); + + /* Read back current (default) hardware configuration */ + if (data->save) + data->save(l2x0_base); + + /* L2 configuration can only be changed if the cache is disabled */ + if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) + if (data->of_parse) + data->of_parse(np, &aux_val, &aux_mask); + + if (cache_id_part_number_from_dt) + cache_id = cache_id_part_number_from_dt; + else + cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID); + + return __l2c_init(data, aux_val, aux_mask, cache_id, nosync); +} +#endif -- cgit v1.2.3