From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/gpu/drm/panel/panel-tpo-td043mtea1.c | 506 +++++++++++++++++++++++++++ 1 file changed, 506 insertions(+) create mode 100644 drivers/gpu/drm/panel/panel-tpo-td043mtea1.c (limited to 'drivers/gpu/drm/panel/panel-tpo-td043mtea1.c') diff --git a/drivers/gpu/drm/panel/panel-tpo-td043mtea1.c b/drivers/gpu/drm/panel/panel-tpo-td043mtea1.c new file mode 100644 index 000000000..cf4609bb9 --- /dev/null +++ b/drivers/gpu/drm/panel/panel-tpo-td043mtea1.c @@ -0,0 +1,506 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Toppoly TD043MTEA1 Panel Driver + * + * Copyright (C) 2019 Texas Instruments Incorporated + * + * Based on the omapdrm-specific panel-tpo-td043mtea1 driver + * + * Author: Gražvydas Ignotas + */ + +#include +#include +#include +#include + +#include +#include +#include + +#define TPO_R02_MODE(x) ((x) & 7) +#define TPO_R02_MODE_800x480 7 +#define TPO_R02_NCLK_RISING BIT(3) +#define TPO_R02_HSYNC_HIGH BIT(4) +#define TPO_R02_VSYNC_HIGH BIT(5) + +#define TPO_R03_NSTANDBY BIT(0) +#define TPO_R03_EN_CP_CLK BIT(1) +#define TPO_R03_EN_VGL_PUMP BIT(2) +#define TPO_R03_EN_PWM BIT(3) +#define TPO_R03_DRIVING_CAP_100 BIT(4) +#define TPO_R03_EN_PRE_CHARGE BIT(6) +#define TPO_R03_SOFTWARE_CTL BIT(7) + +#define TPO_R04_NFLIP_H BIT(0) +#define TPO_R04_NFLIP_V BIT(1) +#define TPO_R04_CP_CLK_FREQ_1H BIT(2) +#define TPO_R04_VGL_FREQ_1H BIT(4) + +#define TPO_R03_VAL_NORMAL \ + (TPO_R03_NSTANDBY | TPO_R03_EN_CP_CLK | TPO_R03_EN_VGL_PUMP | \ + TPO_R03_EN_PWM | TPO_R03_DRIVING_CAP_100 | TPO_R03_EN_PRE_CHARGE | \ + TPO_R03_SOFTWARE_CTL) + +#define TPO_R03_VAL_STANDBY \ + (TPO_R03_DRIVING_CAP_100 | TPO_R03_EN_PRE_CHARGE | \ + TPO_R03_SOFTWARE_CTL) + +static const u16 td043mtea1_def_gamma[12] = { + 105, 315, 381, 431, 490, 537, 579, 686, 780, 837, 880, 1023 +}; + +struct td043mtea1_panel { + struct drm_panel panel; + + struct spi_device *spi; + struct regulator *vcc_reg; + struct gpio_desc *reset_gpio; + + unsigned int mode; + u16 gamma[12]; + bool vmirror; + bool powered_on; + bool spi_suspended; + bool power_on_resume; +}; + +#define to_td043mtea1_device(p) container_of(p, struct td043mtea1_panel, panel) + +/* ----------------------------------------------------------------------------- + * Hardware Access + */ + +static int td043mtea1_write(struct td043mtea1_panel *lcd, u8 addr, u8 value) +{ + struct spi_message msg; + struct spi_transfer xfer; + u16 data; + int ret; + + spi_message_init(&msg); + + memset(&xfer, 0, sizeof(xfer)); + + data = ((u16)addr << 10) | (1 << 8) | value; + xfer.tx_buf = &data; + xfer.bits_per_word = 16; + xfer.len = 2; + spi_message_add_tail(&xfer, &msg); + + ret = spi_sync(lcd->spi, &msg); + if (ret < 0) + dev_warn(&lcd->spi->dev, "failed to write to LCD reg (%d)\n", + ret); + + return ret; +} + +static void td043mtea1_write_gamma(struct td043mtea1_panel *lcd) +{ + const u16 *gamma = lcd->gamma; + unsigned int i; + u8 val; + + /* gamma bits [9:8] */ + for (val = i = 0; i < 4; i++) + val |= (gamma[i] & 0x300) >> ((i + 1) * 2); + td043mtea1_write(lcd, 0x11, val); + + for (val = i = 0; i < 4; i++) + val |= (gamma[i + 4] & 0x300) >> ((i + 1) * 2); + td043mtea1_write(lcd, 0x12, val); + + for (val = i = 0; i < 4; i++) + val |= (gamma[i + 8] & 0x300) >> ((i + 1) * 2); + td043mtea1_write(lcd, 0x13, val); + + /* gamma bits [7:0] */ + for (i = 0; i < 12; i++) + td043mtea1_write(lcd, 0x14 + i, gamma[i] & 0xff); +} + +static int td043mtea1_write_mirror(struct td043mtea1_panel *lcd) +{ + u8 reg4 = TPO_R04_NFLIP_H | TPO_R04_NFLIP_V | + TPO_R04_CP_CLK_FREQ_1H | TPO_R04_VGL_FREQ_1H; + if (lcd->vmirror) + reg4 &= ~TPO_R04_NFLIP_V; + + return td043mtea1_write(lcd, 4, reg4); +} + +static int td043mtea1_power_on(struct td043mtea1_panel *lcd) +{ + int ret; + + if (lcd->powered_on) + return 0; + + ret = regulator_enable(lcd->vcc_reg); + if (ret < 0) + return ret; + + /* Wait for the panel to stabilize. */ + msleep(160); + + gpiod_set_value(lcd->reset_gpio, 0); + + td043mtea1_write(lcd, 2, TPO_R02_MODE(lcd->mode) | TPO_R02_NCLK_RISING); + td043mtea1_write(lcd, 3, TPO_R03_VAL_NORMAL); + td043mtea1_write(lcd, 0x20, 0xf0); + td043mtea1_write(lcd, 0x21, 0xf0); + td043mtea1_write_mirror(lcd); + td043mtea1_write_gamma(lcd); + + lcd->powered_on = true; + + return 0; +} + +static void td043mtea1_power_off(struct td043mtea1_panel *lcd) +{ + if (!lcd->powered_on) + return; + + td043mtea1_write(lcd, 3, TPO_R03_VAL_STANDBY | TPO_R03_EN_PWM); + + gpiod_set_value(lcd->reset_gpio, 1); + + /* wait for at least 2 vsyncs before cutting off power */ + msleep(50); + + td043mtea1_write(lcd, 3, TPO_R03_VAL_STANDBY); + + regulator_disable(lcd->vcc_reg); + + lcd->powered_on = false; +} + +/* ----------------------------------------------------------------------------- + * sysfs + */ + +static ssize_t vmirror_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct td043mtea1_panel *lcd = dev_get_drvdata(dev); + + return sysfs_emit(buf, "%d\n", lcd->vmirror); +} + +static ssize_t vmirror_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct td043mtea1_panel *lcd = dev_get_drvdata(dev); + int val; + int ret; + + ret = kstrtoint(buf, 0, &val); + if (ret < 0) + return ret; + + lcd->vmirror = !!val; + + ret = td043mtea1_write_mirror(lcd); + if (ret < 0) + return ret; + + return count; +} + +static ssize_t mode_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct td043mtea1_panel *lcd = dev_get_drvdata(dev); + + return sysfs_emit(buf, "%d\n", lcd->mode); +} + +static ssize_t mode_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct td043mtea1_panel *lcd = dev_get_drvdata(dev); + long val; + int ret; + + ret = kstrtol(buf, 0, &val); + if (ret != 0 || val & ~7) + return -EINVAL; + + lcd->mode = val; + + val |= TPO_R02_NCLK_RISING; + td043mtea1_write(lcd, 2, val); + + return count; +} + +static ssize_t gamma_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct td043mtea1_panel *lcd = dev_get_drvdata(dev); + ssize_t len = 0; + unsigned int i; + int ret; + + for (i = 0; i < ARRAY_SIZE(lcd->gamma); i++) { + ret = snprintf(buf + len, PAGE_SIZE - len, "%u ", + lcd->gamma[i]); + if (ret < 0) + return ret; + len += ret; + } + buf[len - 1] = '\n'; + + return len; +} + +static ssize_t gamma_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct td043mtea1_panel *lcd = dev_get_drvdata(dev); + unsigned int g[12]; + unsigned int i; + int ret; + + ret = sscanf(buf, "%u %u %u %u %u %u %u %u %u %u %u %u", + &g[0], &g[1], &g[2], &g[3], &g[4], &g[5], + &g[6], &g[7], &g[8], &g[9], &g[10], &g[11]); + if (ret != 12) + return -EINVAL; + + for (i = 0; i < 12; i++) + lcd->gamma[i] = g[i]; + + td043mtea1_write_gamma(lcd); + + return count; +} + +static DEVICE_ATTR_RW(vmirror); +static DEVICE_ATTR_RW(mode); +static DEVICE_ATTR_RW(gamma); + +static struct attribute *td043mtea1_attrs[] = { + &dev_attr_vmirror.attr, + &dev_attr_mode.attr, + &dev_attr_gamma.attr, + NULL, +}; + +static const struct attribute_group td043mtea1_attr_group = { + .attrs = td043mtea1_attrs, +}; + +/* ----------------------------------------------------------------------------- + * Panel Operations + */ + +static int td043mtea1_unprepare(struct drm_panel *panel) +{ + struct td043mtea1_panel *lcd = to_td043mtea1_device(panel); + + if (!lcd->spi_suspended) + td043mtea1_power_off(lcd); + + return 0; +} + +static int td043mtea1_prepare(struct drm_panel *panel) +{ + struct td043mtea1_panel *lcd = to_td043mtea1_device(panel); + int ret; + + /* + * If we are resuming from system suspend, SPI might not be enabled + * yet, so we'll program the LCD from SPI PM resume callback. + */ + if (lcd->spi_suspended) + return 0; + + ret = td043mtea1_power_on(lcd); + if (ret) { + dev_err(&lcd->spi->dev, "%s: power on failed (%d)\n", + __func__, ret); + return ret; + } + + return 0; +} + +static const struct drm_display_mode td043mtea1_mode = { + .clock = 36000, + .hdisplay = 800, + .hsync_start = 800 + 68, + .hsync_end = 800 + 68 + 1, + .htotal = 800 + 68 + 1 + 214, + .vdisplay = 480, + .vsync_start = 480 + 39, + .vsync_end = 480 + 39 + 1, + .vtotal = 480 + 39 + 1 + 34, + .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED, + .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, + .width_mm = 94, + .height_mm = 56, +}; + +static int td043mtea1_get_modes(struct drm_panel *panel, + struct drm_connector *connector) +{ + struct drm_display_mode *mode; + + mode = drm_mode_duplicate(connector->dev, &td043mtea1_mode); + if (!mode) + return -ENOMEM; + + drm_mode_set_name(mode); + drm_mode_probed_add(connector, mode); + + connector->display_info.width_mm = td043mtea1_mode.width_mm; + connector->display_info.height_mm = td043mtea1_mode.height_mm; + /* + * FIXME: According to the datasheet sync signals are sampled on the + * rising edge of the clock, but the code running on the OMAP3 Pandora + * indicates sampling on the falling edge. This should be tested on a + * real device. + */ + connector->display_info.bus_flags = DRM_BUS_FLAG_DE_HIGH + | DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE + | DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE; + + return 1; +} + +static const struct drm_panel_funcs td043mtea1_funcs = { + .unprepare = td043mtea1_unprepare, + .prepare = td043mtea1_prepare, + .get_modes = td043mtea1_get_modes, +}; + +/* ----------------------------------------------------------------------------- + * Power Management, Probe and Remove + */ + +static int __maybe_unused td043mtea1_suspend(struct device *dev) +{ + struct td043mtea1_panel *lcd = dev_get_drvdata(dev); + + if (lcd->powered_on) { + td043mtea1_power_off(lcd); + lcd->powered_on = true; + } + + lcd->spi_suspended = true; + + return 0; +} + +static int __maybe_unused td043mtea1_resume(struct device *dev) +{ + struct td043mtea1_panel *lcd = dev_get_drvdata(dev); + int ret; + + lcd->spi_suspended = false; + + if (lcd->powered_on) { + lcd->powered_on = false; + ret = td043mtea1_power_on(lcd); + if (ret) + return ret; + } + + return 0; +} + +static SIMPLE_DEV_PM_OPS(td043mtea1_pm_ops, td043mtea1_suspend, + td043mtea1_resume); + +static int td043mtea1_probe(struct spi_device *spi) +{ + struct td043mtea1_panel *lcd; + int ret; + + lcd = devm_kzalloc(&spi->dev, sizeof(*lcd), GFP_KERNEL); + if (lcd == NULL) + return -ENOMEM; + + spi_set_drvdata(spi, lcd); + lcd->spi = spi; + lcd->mode = TPO_R02_MODE_800x480; + memcpy(lcd->gamma, td043mtea1_def_gamma, sizeof(lcd->gamma)); + + lcd->vcc_reg = devm_regulator_get(&spi->dev, "vcc"); + if (IS_ERR(lcd->vcc_reg)) + return dev_err_probe(&spi->dev, PTR_ERR(lcd->vcc_reg), + "failed to get VCC regulator\n"); + + lcd->reset_gpio = devm_gpiod_get(&spi->dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(lcd->reset_gpio)) + return dev_err_probe(&spi->dev, PTR_ERR(lcd->reset_gpio), + "failed to get reset GPIO\n"); + + spi->bits_per_word = 16; + spi->mode = SPI_MODE_0; + + ret = spi_setup(spi); + if (ret < 0) { + dev_err(&spi->dev, "failed to setup SPI: %d\n", ret); + return ret; + } + + ret = sysfs_create_group(&spi->dev.kobj, &td043mtea1_attr_group); + if (ret < 0) { + dev_err(&spi->dev, "failed to create sysfs files\n"); + return ret; + } + + drm_panel_init(&lcd->panel, &lcd->spi->dev, &td043mtea1_funcs, + DRM_MODE_CONNECTOR_DPI); + + drm_panel_add(&lcd->panel); + + return 0; +} + +static void td043mtea1_remove(struct spi_device *spi) +{ + struct td043mtea1_panel *lcd = spi_get_drvdata(spi); + + drm_panel_remove(&lcd->panel); + drm_panel_disable(&lcd->panel); + drm_panel_unprepare(&lcd->panel); + + sysfs_remove_group(&spi->dev.kobj, &td043mtea1_attr_group); +} + +static const struct of_device_id td043mtea1_of_match[] = { + { .compatible = "tpo,td043mtea1", }, + { /* sentinel */ }, +}; + +MODULE_DEVICE_TABLE(of, td043mtea1_of_match); + +static const struct spi_device_id td043mtea1_ids[] = { + { "td043mtea1", 0 }, + { /* sentinel */ } +}; + +MODULE_DEVICE_TABLE(spi, td043mtea1_ids); + +static struct spi_driver td043mtea1_driver = { + .probe = td043mtea1_probe, + .remove = td043mtea1_remove, + .id_table = td043mtea1_ids, + .driver = { + .name = "panel-tpo-td043mtea1", + .pm = &td043mtea1_pm_ops, + .of_match_table = td043mtea1_of_match, + }, +}; + +module_spi_driver(td043mtea1_driver); + +MODULE_AUTHOR("Gražvydas Ignotas "); +MODULE_DESCRIPTION("TPO TD043MTEA1 Panel Driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3