From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/i2c/busses/i2c-cht-wc.c | 515 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 515 insertions(+) create mode 100644 drivers/i2c/busses/i2c-cht-wc.c (limited to 'drivers/i2c/busses/i2c-cht-wc.c') diff --git a/drivers/i2c/busses/i2c-cht-wc.c b/drivers/i2c/busses/i2c-cht-wc.c new file mode 100644 index 000000000..190abdc46 --- /dev/null +++ b/drivers/i2c/busses/i2c-cht-wc.c @@ -0,0 +1,515 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Intel CHT Whiskey Cove PMIC I2C Master driver + * Copyright (C) 2017 Hans de Goede + * + * Based on various non upstream patches to support the CHT Whiskey Cove PMIC: + * Copyright (C) 2011 - 2014 Intel Corporation. All rights reserved. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define CHT_WC_I2C_CTRL 0x5e24 +#define CHT_WC_I2C_CTRL_WR BIT(0) +#define CHT_WC_I2C_CTRL_RD BIT(1) +#define CHT_WC_I2C_CLIENT_ADDR 0x5e25 +#define CHT_WC_I2C_REG_OFFSET 0x5e26 +#define CHT_WC_I2C_WRDATA 0x5e27 +#define CHT_WC_I2C_RDDATA 0x5e28 + +#define CHT_WC_EXTCHGRIRQ 0x6e0a +#define CHT_WC_EXTCHGRIRQ_CLIENT_IRQ BIT(0) +#define CHT_WC_EXTCHGRIRQ_WRITE_IRQ BIT(1) +#define CHT_WC_EXTCHGRIRQ_READ_IRQ BIT(2) +#define CHT_WC_EXTCHGRIRQ_NACK_IRQ BIT(3) +#define CHT_WC_EXTCHGRIRQ_ADAP_IRQMASK ((u8)GENMASK(3, 1)) +#define CHT_WC_EXTCHGRIRQ_MSK 0x6e17 + +struct cht_wc_i2c_adap { + struct i2c_adapter adapter; + wait_queue_head_t wait; + struct irq_chip irqchip; + struct mutex adap_lock; + struct mutex irqchip_lock; + struct regmap *regmap; + struct irq_domain *irq_domain; + struct i2c_client *client; + int client_irq; + u8 irq_mask; + u8 old_irq_mask; + int read_data; + bool io_error; + bool done; +}; + +static irqreturn_t cht_wc_i2c_adap_thread_handler(int id, void *data) +{ + struct cht_wc_i2c_adap *adap = data; + int ret, reg; + + mutex_lock(&adap->adap_lock); + + /* Read IRQs */ + ret = regmap_read(adap->regmap, CHT_WC_EXTCHGRIRQ, ®); + if (ret) { + dev_err(&adap->adapter.dev, "Error reading extchgrirq reg\n"); + mutex_unlock(&adap->adap_lock); + return IRQ_NONE; + } + + reg &= ~adap->irq_mask; + + /* Reads must be acked after reading the received data. */ + ret = regmap_read(adap->regmap, CHT_WC_I2C_RDDATA, &adap->read_data); + if (ret) + adap->io_error = true; + + /* + * Immediately ack IRQs, so that if new IRQs arrives while we're + * handling the previous ones our irq will re-trigger when we're done. + */ + ret = regmap_write(adap->regmap, CHT_WC_EXTCHGRIRQ, reg); + if (ret) + dev_err(&adap->adapter.dev, "Error writing extchgrirq reg\n"); + + if (reg & CHT_WC_EXTCHGRIRQ_ADAP_IRQMASK) { + adap->io_error |= !!(reg & CHT_WC_EXTCHGRIRQ_NACK_IRQ); + adap->done = true; + } + + mutex_unlock(&adap->adap_lock); + + if (reg & CHT_WC_EXTCHGRIRQ_ADAP_IRQMASK) + wake_up(&adap->wait); + + /* + * Do NOT use handle_nested_irq here, the client irq handler will + * likely want to do i2c transfers and the i2c controller uses this + * interrupt handler as well, so running the client irq handler from + * this thread will cause things to lock up. + */ + if (reg & CHT_WC_EXTCHGRIRQ_CLIENT_IRQ) + generic_handle_irq_safe(adap->client_irq); + + return IRQ_HANDLED; +} + +static u32 cht_wc_i2c_adap_master_func(struct i2c_adapter *adap) +{ + /* This i2c adapter only supports SMBUS byte transfers */ + return I2C_FUNC_SMBUS_BYTE_DATA; +} + +static int cht_wc_i2c_adap_smbus_xfer(struct i2c_adapter *_adap, u16 addr, + unsigned short flags, char read_write, + u8 command, int size, + union i2c_smbus_data *data) +{ + struct cht_wc_i2c_adap *adap = i2c_get_adapdata(_adap); + int ret; + + mutex_lock(&adap->adap_lock); + adap->io_error = false; + adap->done = false; + mutex_unlock(&adap->adap_lock); + + ret = regmap_write(adap->regmap, CHT_WC_I2C_CLIENT_ADDR, addr); + if (ret) + return ret; + + if (read_write == I2C_SMBUS_WRITE) { + ret = regmap_write(adap->regmap, CHT_WC_I2C_WRDATA, data->byte); + if (ret) + return ret; + } + + ret = regmap_write(adap->regmap, CHT_WC_I2C_REG_OFFSET, command); + if (ret) + return ret; + + ret = regmap_write(adap->regmap, CHT_WC_I2C_CTRL, + (read_write == I2C_SMBUS_WRITE) ? + CHT_WC_I2C_CTRL_WR : CHT_WC_I2C_CTRL_RD); + if (ret) + return ret; + + ret = wait_event_timeout(adap->wait, adap->done, msecs_to_jiffies(30)); + if (ret == 0) { + /* + * The CHT GPIO controller serializes all IRQs, sometimes + * causing significant delays, check status manually. + */ + cht_wc_i2c_adap_thread_handler(0, adap); + if (!adap->done) + return -ETIMEDOUT; + } + + ret = 0; + mutex_lock(&adap->adap_lock); + if (adap->io_error) + ret = -EIO; + else if (read_write == I2C_SMBUS_READ) + data->byte = adap->read_data; + mutex_unlock(&adap->adap_lock); + + return ret; +} + +static const struct i2c_algorithm cht_wc_i2c_adap_algo = { + .functionality = cht_wc_i2c_adap_master_func, + .smbus_xfer = cht_wc_i2c_adap_smbus_xfer, +}; + +/* + * We are an i2c-adapter which itself is part of an i2c-client. This means that + * transfers done through us take adapter->bus_lock twice, once for our parent + * i2c-adapter and once to take our own bus_lock. Lockdep does not like this + * nested locking, to make lockdep happy in the case of busses with muxes, the + * i2c-core's i2c_adapter_lock_bus function calls: + * rt_mutex_lock_nested(&adapter->bus_lock, i2c_adapter_depth(adapter)); + * + * But i2c_adapter_depth only works when the direct parent of the adapter is + * another adapter, as it is only meant for muxes. In our case there is an + * i2c-client and MFD instantiated platform_device in the parent->child chain + * between the 2 devices. + * + * So we override the default i2c_lock_operations and pass a hardcoded + * depth of 1 to rt_mutex_lock_nested, to make lockdep happy. + * + * Note that if there were to be a mux attached to our adapter, this would + * break things again since the i2c-mux code expects the root-adapter to have + * a locking depth of 0. But we always have only 1 client directly attached + * in the form of the Charger IC paired with the CHT Whiskey Cove PMIC. + */ +static void cht_wc_i2c_adap_lock_bus(struct i2c_adapter *adapter, + unsigned int flags) +{ + rt_mutex_lock_nested(&adapter->bus_lock, 1); +} + +static int cht_wc_i2c_adap_trylock_bus(struct i2c_adapter *adapter, + unsigned int flags) +{ + return rt_mutex_trylock(&adapter->bus_lock); +} + +static void cht_wc_i2c_adap_unlock_bus(struct i2c_adapter *adapter, + unsigned int flags) +{ + rt_mutex_unlock(&adapter->bus_lock); +} + +static const struct i2c_lock_operations cht_wc_i2c_adap_lock_ops = { + .lock_bus = cht_wc_i2c_adap_lock_bus, + .trylock_bus = cht_wc_i2c_adap_trylock_bus, + .unlock_bus = cht_wc_i2c_adap_unlock_bus, +}; + +/**** irqchip for the client connected to the extchgr i2c adapter ****/ +static void cht_wc_i2c_irq_lock(struct irq_data *data) +{ + struct cht_wc_i2c_adap *adap = irq_data_get_irq_chip_data(data); + + mutex_lock(&adap->irqchip_lock); +} + +static void cht_wc_i2c_irq_sync_unlock(struct irq_data *data) +{ + struct cht_wc_i2c_adap *adap = irq_data_get_irq_chip_data(data); + int ret; + + if (adap->irq_mask != adap->old_irq_mask) { + ret = regmap_write(adap->regmap, CHT_WC_EXTCHGRIRQ_MSK, + adap->irq_mask); + if (ret == 0) + adap->old_irq_mask = adap->irq_mask; + else + dev_err(&adap->adapter.dev, "Error writing EXTCHGRIRQ_MSK\n"); + } + + mutex_unlock(&adap->irqchip_lock); +} + +static void cht_wc_i2c_irq_enable(struct irq_data *data) +{ + struct cht_wc_i2c_adap *adap = irq_data_get_irq_chip_data(data); + + adap->irq_mask &= ~CHT_WC_EXTCHGRIRQ_CLIENT_IRQ; +} + +static void cht_wc_i2c_irq_disable(struct irq_data *data) +{ + struct cht_wc_i2c_adap *adap = irq_data_get_irq_chip_data(data); + + adap->irq_mask |= CHT_WC_EXTCHGRIRQ_CLIENT_IRQ; +} + +static const struct irq_chip cht_wc_i2c_irq_chip = { + .irq_bus_lock = cht_wc_i2c_irq_lock, + .irq_bus_sync_unlock = cht_wc_i2c_irq_sync_unlock, + .irq_disable = cht_wc_i2c_irq_disable, + .irq_enable = cht_wc_i2c_irq_enable, + .name = "cht_wc_ext_chrg_irq_chip", +}; + +/********** GPD Win / Pocket charger IC settings **********/ +static const char * const bq24190_suppliers[] = { + "tcpm-source-psy-i2c-fusb302" }; + +static const struct property_entry bq24190_props[] = { + PROPERTY_ENTRY_STRING_ARRAY("supplied-from", bq24190_suppliers), + PROPERTY_ENTRY_BOOL("omit-battery-class"), + PROPERTY_ENTRY_BOOL("disable-reset"), + { } +}; + +static const struct software_node bq24190_node = { + .properties = bq24190_props, +}; + +static struct regulator_consumer_supply fusb302_consumer = { + .supply = "vbus", + /* Must match fusb302 dev_name in intel_cht_int33fe.c */ + .dev_name = "i2c-fusb302", +}; + +static const struct regulator_init_data bq24190_vbus_init_data = { + .constraints = { + /* The name is used in intel_cht_int33fe.c do not change. */ + .name = "cht_wc_usb_typec_vbus", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .consumer_supplies = &fusb302_consumer, + .num_consumer_supplies = 1, +}; + +static struct bq24190_platform_data bq24190_pdata = { + .regulator_init_data = &bq24190_vbus_init_data, +}; + +static struct i2c_board_info gpd_win_board_info = { + .type = "bq24190", + .addr = 0x6b, + .dev_name = "bq24190", + .swnode = &bq24190_node, + .platform_data = &bq24190_pdata, +}; + +/********** Xiaomi Mi Pad 2 charger IC settings **********/ +static struct regulator_consumer_supply bq2589x_vbus_consumer = { + .supply = "vbus", + .dev_name = "cht_wcove_pwrsrc", +}; + +static const struct regulator_init_data bq2589x_vbus_init_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .consumer_supplies = &bq2589x_vbus_consumer, + .num_consumer_supplies = 1, +}; + +static struct bq25890_platform_data bq2589x_pdata = { + .regulator_init_data = &bq2589x_vbus_init_data, +}; + +static const struct property_entry xiaomi_mipad2_props[] = { + PROPERTY_ENTRY_BOOL("linux,skip-reset"), + PROPERTY_ENTRY_BOOL("linux,read-back-settings"), + { } +}; + +static const struct software_node xiaomi_mipad2_node = { + .properties = xiaomi_mipad2_props, +}; + +static struct i2c_board_info xiaomi_mipad2_board_info = { + .type = "bq25890", + .addr = 0x6a, + .dev_name = "bq25890", + .swnode = &xiaomi_mipad2_node, + .platform_data = &bq2589x_pdata, +}; + +/********** Lenovo Yogabook YB1-X90F/-X91F/-X91L charger settings **********/ +static const char * const lenovo_yb1_bq25892_suppliers[] = { "cht_wcove_pwrsrc" }; + +static const struct property_entry lenovo_yb1_bq25892_props[] = { + PROPERTY_ENTRY_STRING_ARRAY("supplied-from", + lenovo_yb1_bq25892_suppliers), + PROPERTY_ENTRY_U32("linux,pump-express-vbus-max", 12000000), + PROPERTY_ENTRY_BOOL("linux,skip-reset"), + /* + * The firmware sets everything to the defaults, which leads to a + * somewhat low charge-current of 2048mA and worse to a battery-voltage + * of 4.2V instead of 4.35V (when booted without a charger connected). + * Use our own values instead of "linux,read-back-settings" to fix this. + */ + PROPERTY_ENTRY_U32("ti,charge-current", 4224000), + PROPERTY_ENTRY_U32("ti,battery-regulation-voltage", 4352000), + PROPERTY_ENTRY_U32("ti,termination-current", 256000), + PROPERTY_ENTRY_U32("ti,precharge-current", 128000), + PROPERTY_ENTRY_U32("ti,minimum-sys-voltage", 3500000), + PROPERTY_ENTRY_U32("ti,boost-voltage", 4998000), + PROPERTY_ENTRY_U32("ti,boost-max-current", 1400000), + PROPERTY_ENTRY_BOOL("ti,use-ilim-pin"), + { } +}; + +static const struct software_node lenovo_yb1_bq25892_node = { + .properties = lenovo_yb1_bq25892_props, +}; + +static struct i2c_board_info lenovo_yogabook1_board_info = { + .type = "bq25892", + .addr = 0x6b, + .dev_name = "bq25892", + .swnode = &lenovo_yb1_bq25892_node, + .platform_data = &bq2589x_pdata, +}; + +static int cht_wc_i2c_adap_i2c_probe(struct platform_device *pdev) +{ + struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent); + struct i2c_board_info *board_info = NULL; + struct cht_wc_i2c_adap *adap; + int ret, reg, irq; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + adap = devm_kzalloc(&pdev->dev, sizeof(*adap), GFP_KERNEL); + if (!adap) + return -ENOMEM; + + init_waitqueue_head(&adap->wait); + mutex_init(&adap->adap_lock); + mutex_init(&adap->irqchip_lock); + adap->irqchip = cht_wc_i2c_irq_chip; + adap->regmap = pmic->regmap; + adap->adapter.owner = THIS_MODULE; + adap->adapter.class = I2C_CLASS_HWMON; + adap->adapter.algo = &cht_wc_i2c_adap_algo; + adap->adapter.lock_ops = &cht_wc_i2c_adap_lock_ops; + strscpy(adap->adapter.name, "PMIC I2C Adapter", + sizeof(adap->adapter.name)); + adap->adapter.dev.parent = &pdev->dev; + + /* Clear and activate i2c-adapter interrupts, disable client IRQ */ + adap->old_irq_mask = adap->irq_mask = ~CHT_WC_EXTCHGRIRQ_ADAP_IRQMASK; + + ret = regmap_read(adap->regmap, CHT_WC_I2C_RDDATA, ®); + if (ret) + return ret; + + ret = regmap_write(adap->regmap, CHT_WC_EXTCHGRIRQ, ~adap->irq_mask); + if (ret) + return ret; + + ret = regmap_write(adap->regmap, CHT_WC_EXTCHGRIRQ_MSK, adap->irq_mask); + if (ret) + return ret; + + /* Alloc and register client IRQ */ + adap->irq_domain = irq_domain_add_linear(NULL, 1, &irq_domain_simple_ops, NULL); + if (!adap->irq_domain) + return -ENOMEM; + + adap->client_irq = irq_create_mapping(adap->irq_domain, 0); + if (!adap->client_irq) { + ret = -ENOMEM; + goto remove_irq_domain; + } + + irq_set_chip_data(adap->client_irq, adap); + irq_set_chip_and_handler(adap->client_irq, &adap->irqchip, + handle_simple_irq); + + ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, + cht_wc_i2c_adap_thread_handler, + IRQF_ONESHOT, "PMIC I2C Adapter", adap); + if (ret) + goto remove_irq_domain; + + i2c_set_adapdata(&adap->adapter, adap); + ret = i2c_add_adapter(&adap->adapter); + if (ret) + goto remove_irq_domain; + + switch (pmic->cht_wc_model) { + case INTEL_CHT_WC_GPD_WIN_POCKET: + board_info = &gpd_win_board_info; + break; + case INTEL_CHT_WC_XIAOMI_MIPAD2: + board_info = &xiaomi_mipad2_board_info; + break; + case INTEL_CHT_WC_LENOVO_YOGABOOK1: + board_info = &lenovo_yogabook1_board_info; + break; + default: + dev_warn(&pdev->dev, "Unknown model, not instantiating charger device\n"); + break; + } + + if (board_info) { + board_info->irq = adap->client_irq; + adap->client = i2c_new_client_device(&adap->adapter, board_info); + if (IS_ERR(adap->client)) { + ret = PTR_ERR(adap->client); + goto del_adapter; + } + } + + platform_set_drvdata(pdev, adap); + return 0; + +del_adapter: + i2c_del_adapter(&adap->adapter); +remove_irq_domain: + irq_domain_remove(adap->irq_domain); + return ret; +} + +static int cht_wc_i2c_adap_i2c_remove(struct platform_device *pdev) +{ + struct cht_wc_i2c_adap *adap = platform_get_drvdata(pdev); + + i2c_unregister_device(adap->client); + i2c_del_adapter(&adap->adapter); + irq_domain_remove(adap->irq_domain); + + return 0; +} + +static const struct platform_device_id cht_wc_i2c_adap_id_table[] = { + { .name = "cht_wcove_ext_chgr" }, + {}, +}; +MODULE_DEVICE_TABLE(platform, cht_wc_i2c_adap_id_table); + +static struct platform_driver cht_wc_i2c_adap_driver = { + .probe = cht_wc_i2c_adap_i2c_probe, + .remove = cht_wc_i2c_adap_i2c_remove, + .driver = { + .name = "cht_wcove_ext_chgr", + }, + .id_table = cht_wc_i2c_adap_id_table, +}; +module_platform_driver(cht_wc_i2c_adap_driver); + +MODULE_DESCRIPTION("Intel CHT Whiskey Cove PMIC I2C Master driver"); +MODULE_AUTHOR("Hans de Goede "); +MODULE_LICENSE("GPL"); -- cgit v1.2.3