From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/iio/adc/qcom-spmi-adc5.c | 942 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 942 insertions(+) create mode 100644 drivers/iio/adc/qcom-spmi-adc5.c (limited to 'drivers/iio/adc/qcom-spmi-adc5.c') diff --git a/drivers/iio/adc/qcom-spmi-adc5.c b/drivers/iio/adc/qcom-spmi-adc5.c new file mode 100644 index 000000000..d1b865707 --- /dev/null +++ b/drivers/iio/adc/qcom-spmi-adc5.c @@ -0,0 +1,942 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2018, 2020, The Linux Foundation. All rights reserved. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define ADC5_USR_REVISION1 0x0 +#define ADC5_USR_STATUS1 0x8 +#define ADC5_USR_STATUS1_CONV_FAULT BIT(7) +#define ADC5_USR_STATUS1_REQ_STS BIT(1) +#define ADC5_USR_STATUS1_EOC BIT(0) +#define ADC5_USR_STATUS1_REQ_STS_EOC_MASK 0x3 + +#define ADC5_USR_STATUS2 0x9 +#define ADC5_USR_STATUS2_CONV_SEQ_MASK 0x70 +#define ADC5_USR_STATUS2_CONV_SEQ_MASK_SHIFT 0x5 + +#define ADC5_USR_IBAT_MEAS 0xf +#define ADC5_USR_IBAT_MEAS_SUPPORTED BIT(0) + +#define ADC5_USR_DIG_PARAM 0x42 +#define ADC5_USR_DIG_PARAM_CAL_VAL BIT(6) +#define ADC5_USR_DIG_PARAM_CAL_VAL_SHIFT 6 +#define ADC5_USR_DIG_PARAM_CAL_SEL 0x30 +#define ADC5_USR_DIG_PARAM_CAL_SEL_SHIFT 4 +#define ADC5_USR_DIG_PARAM_DEC_RATIO_SEL 0xc +#define ADC5_USR_DIG_PARAM_DEC_RATIO_SEL_SHIFT 2 + +#define ADC5_USR_FAST_AVG_CTL 0x43 +#define ADC5_USR_FAST_AVG_CTL_EN BIT(7) +#define ADC5_USR_FAST_AVG_CTL_SAMPLES_MASK 0x7 + +#define ADC5_USR_CH_SEL_CTL 0x44 + +#define ADC5_USR_DELAY_CTL 0x45 +#define ADC5_USR_HW_SETTLE_DELAY_MASK 0xf + +#define ADC5_USR_EN_CTL1 0x46 +#define ADC5_USR_EN_CTL1_ADC_EN BIT(7) + +#define ADC5_USR_CONV_REQ 0x47 +#define ADC5_USR_CONV_REQ_REQ BIT(7) + +#define ADC5_USR_DATA0 0x50 + +#define ADC5_USR_DATA1 0x51 + +#define ADC5_USR_IBAT_DATA0 0x52 + +#define ADC5_USR_IBAT_DATA1 0x53 + +#define ADC_CHANNEL_OFFSET 0x8 +#define ADC_CHANNEL_MASK GENMASK(7, 0) + +/* + * Conversion time varies based on the decimation, clock rate, fast average + * samples and measurements queued across different VADC peripherals. + * Set the timeout to a max of 100ms. + */ +#define ADC5_CONV_TIME_MIN_US 263 +#define ADC5_CONV_TIME_MAX_US 264 +#define ADC5_CONV_TIME_RETRY 400 +#define ADC5_CONV_TIMEOUT msecs_to_jiffies(100) + +/* Digital version >= 5.3 supports hw_settle_2 */ +#define ADC5_HW_SETTLE_DIFF_MINOR 3 +#define ADC5_HW_SETTLE_DIFF_MAJOR 5 + +/* For PMIC7 */ +#define ADC_APP_SID 0x40 +#define ADC_APP_SID_MASK GENMASK(3, 0) +#define ADC7_CONV_TIMEOUT msecs_to_jiffies(10) + +enum adc5_cal_method { + ADC5_NO_CAL = 0, + ADC5_RATIOMETRIC_CAL, + ADC5_ABSOLUTE_CAL +}; + +enum adc5_cal_val { + ADC5_TIMER_CAL = 0, + ADC5_NEW_CAL +}; + +/** + * struct adc5_channel_prop - ADC channel property. + * @channel: channel number, refer to the channel list. + * @cal_method: calibration method. + * @cal_val: calibration value + * @decimation: sampling rate supported for the channel. + * @sid: slave id of PMIC owning the channel, for PMIC7. + * @prescale: channel scaling performed on the input signal. + * @hw_settle_time: the time between AMUX being configured and the + * start of conversion. + * @avg_samples: ability to provide single result from the ADC + * that is an average of multiple measurements. + * @scale_fn_type: Represents the scaling function to convert voltage + * physical units desired by the client for the channel. + * @datasheet_name: Channel name used in device tree. + */ +struct adc5_channel_prop { + unsigned int channel; + enum adc5_cal_method cal_method; + enum adc5_cal_val cal_val; + unsigned int decimation; + unsigned int sid; + unsigned int prescale; + unsigned int hw_settle_time; + unsigned int avg_samples; + enum vadc_scale_fn_type scale_fn_type; + const char *datasheet_name; +}; + +/** + * struct adc5_chip - ADC private structure. + * @regmap: SPMI ADC5 peripheral register map field. + * @dev: SPMI ADC5 device. + * @base: base address for the ADC peripheral. + * @nchannels: number of ADC channels. + * @chan_props: array of ADC channel properties. + * @iio_chans: array of IIO channels specification. + * @poll_eoc: use polling instead of interrupt. + * @complete: ADC result notification after interrupt is received. + * @lock: ADC lock for access to the peripheral. + * @data: software configuration data. + */ +struct adc5_chip { + struct regmap *regmap; + struct device *dev; + u16 base; + unsigned int nchannels; + struct adc5_channel_prop *chan_props; + struct iio_chan_spec *iio_chans; + bool poll_eoc; + struct completion complete; + struct mutex lock; + const struct adc5_data *data; +}; + +static int adc5_read(struct adc5_chip *adc, u16 offset, u8 *data, int len) +{ + return regmap_bulk_read(adc->regmap, adc->base + offset, data, len); +} + +static int adc5_write(struct adc5_chip *adc, u16 offset, u8 *data, int len) +{ + return regmap_bulk_write(adc->regmap, adc->base + offset, data, len); +} + +static int adc5_masked_write(struct adc5_chip *adc, u16 offset, u8 mask, u8 val) +{ + return regmap_update_bits(adc->regmap, adc->base + offset, mask, val); +} + +static int adc5_read_voltage_data(struct adc5_chip *adc, u16 *data) +{ + int ret; + u8 rslt_lsb, rslt_msb; + + ret = adc5_read(adc, ADC5_USR_DATA0, &rslt_lsb, sizeof(rslt_lsb)); + if (ret) + return ret; + + ret = adc5_read(adc, ADC5_USR_DATA1, &rslt_msb, sizeof(rslt_lsb)); + if (ret) + return ret; + + *data = (rslt_msb << 8) | rslt_lsb; + + if (*data == ADC5_USR_DATA_CHECK) { + dev_err(adc->dev, "Invalid data:0x%x\n", *data); + return -EINVAL; + } + + dev_dbg(adc->dev, "voltage raw code:0x%x\n", *data); + + return 0; +} + +static int adc5_poll_wait_eoc(struct adc5_chip *adc) +{ + unsigned int count, retry = ADC5_CONV_TIME_RETRY; + u8 status1; + int ret; + + for (count = 0; count < retry; count++) { + ret = adc5_read(adc, ADC5_USR_STATUS1, &status1, + sizeof(status1)); + if (ret) + return ret; + + status1 &= ADC5_USR_STATUS1_REQ_STS_EOC_MASK; + if (status1 == ADC5_USR_STATUS1_EOC) + return 0; + + usleep_range(ADC5_CONV_TIME_MIN_US, ADC5_CONV_TIME_MAX_US); + } + + return -ETIMEDOUT; +} + +static void adc5_update_dig_param(struct adc5_chip *adc, + struct adc5_channel_prop *prop, u8 *data) +{ + /* Update calibration value */ + *data &= ~ADC5_USR_DIG_PARAM_CAL_VAL; + *data |= (prop->cal_val << ADC5_USR_DIG_PARAM_CAL_VAL_SHIFT); + + /* Update calibration select */ + *data &= ~ADC5_USR_DIG_PARAM_CAL_SEL; + *data |= (prop->cal_method << ADC5_USR_DIG_PARAM_CAL_SEL_SHIFT); + + /* Update decimation ratio select */ + *data &= ~ADC5_USR_DIG_PARAM_DEC_RATIO_SEL; + *data |= (prop->decimation << ADC5_USR_DIG_PARAM_DEC_RATIO_SEL_SHIFT); +} + +static int adc5_configure(struct adc5_chip *adc, + struct adc5_channel_prop *prop) +{ + int ret; + u8 buf[6]; + + /* Read registers 0x42 through 0x46 */ + ret = adc5_read(adc, ADC5_USR_DIG_PARAM, buf, sizeof(buf)); + if (ret) + return ret; + + /* Digital param selection */ + adc5_update_dig_param(adc, prop, &buf[0]); + + /* Update fast average sample value */ + buf[1] &= (u8) ~ADC5_USR_FAST_AVG_CTL_SAMPLES_MASK; + buf[1] |= prop->avg_samples; + + /* Select ADC channel */ + buf[2] = prop->channel; + + /* Select HW settle delay for channel */ + buf[3] &= (u8) ~ADC5_USR_HW_SETTLE_DELAY_MASK; + buf[3] |= prop->hw_settle_time; + + /* Select ADC enable */ + buf[4] |= ADC5_USR_EN_CTL1_ADC_EN; + + /* Select CONV request */ + buf[5] |= ADC5_USR_CONV_REQ_REQ; + + if (!adc->poll_eoc) + reinit_completion(&adc->complete); + + return adc5_write(adc, ADC5_USR_DIG_PARAM, buf, sizeof(buf)); +} + +static int adc7_configure(struct adc5_chip *adc, + struct adc5_channel_prop *prop) +{ + int ret; + u8 conv_req = 0, buf[4]; + + ret = adc5_masked_write(adc, ADC_APP_SID, ADC_APP_SID_MASK, prop->sid); + if (ret) + return ret; + + ret = adc5_read(adc, ADC5_USR_DIG_PARAM, buf, sizeof(buf)); + if (ret) + return ret; + + /* Digital param selection */ + adc5_update_dig_param(adc, prop, &buf[0]); + + /* Update fast average sample value */ + buf[1] &= ~ADC5_USR_FAST_AVG_CTL_SAMPLES_MASK; + buf[1] |= prop->avg_samples; + + /* Select ADC channel */ + buf[2] = prop->channel; + + /* Select HW settle delay for channel */ + buf[3] &= ~ADC5_USR_HW_SETTLE_DELAY_MASK; + buf[3] |= prop->hw_settle_time; + + /* Select CONV request */ + conv_req = ADC5_USR_CONV_REQ_REQ; + + if (!adc->poll_eoc) + reinit_completion(&adc->complete); + + ret = adc5_write(adc, ADC5_USR_DIG_PARAM, buf, sizeof(buf)); + if (ret) + return ret; + + return adc5_write(adc, ADC5_USR_CONV_REQ, &conv_req, 1); +} + +static int adc5_do_conversion(struct adc5_chip *adc, + struct adc5_channel_prop *prop, + struct iio_chan_spec const *chan, + u16 *data_volt, u16 *data_cur) +{ + int ret; + + mutex_lock(&adc->lock); + + ret = adc5_configure(adc, prop); + if (ret) { + dev_err(adc->dev, "ADC configure failed with %d\n", ret); + goto unlock; + } + + if (adc->poll_eoc) { + ret = adc5_poll_wait_eoc(adc); + if (ret) { + dev_err(adc->dev, "EOC bit not set\n"); + goto unlock; + } + } else { + ret = wait_for_completion_timeout(&adc->complete, + ADC5_CONV_TIMEOUT); + if (!ret) { + dev_dbg(adc->dev, "Did not get completion timeout.\n"); + ret = adc5_poll_wait_eoc(adc); + if (ret) { + dev_err(adc->dev, "EOC bit not set\n"); + goto unlock; + } + } + } + + ret = adc5_read_voltage_data(adc, data_volt); +unlock: + mutex_unlock(&adc->lock); + + return ret; +} + +static int adc7_do_conversion(struct adc5_chip *adc, + struct adc5_channel_prop *prop, + struct iio_chan_spec const *chan, + u16 *data_volt, u16 *data_cur) +{ + int ret; + u8 status; + + mutex_lock(&adc->lock); + + ret = adc7_configure(adc, prop); + if (ret) { + dev_err(adc->dev, "ADC configure failed with %d\n", ret); + goto unlock; + } + + /* No support for polling mode at present */ + wait_for_completion_timeout(&adc->complete, ADC7_CONV_TIMEOUT); + + ret = adc5_read(adc, ADC5_USR_STATUS1, &status, 1); + if (ret) + goto unlock; + + if (status & ADC5_USR_STATUS1_CONV_FAULT) { + dev_err(adc->dev, "Unexpected conversion fault\n"); + ret = -EIO; + goto unlock; + } + + ret = adc5_read_voltage_data(adc, data_volt); + +unlock: + mutex_unlock(&adc->lock); + + return ret; +} + +typedef int (*adc_do_conversion)(struct adc5_chip *adc, + struct adc5_channel_prop *prop, + struct iio_chan_spec const *chan, + u16 *data_volt, u16 *data_cur); + +static irqreturn_t adc5_isr(int irq, void *dev_id) +{ + struct adc5_chip *adc = dev_id; + + complete(&adc->complete); + + return IRQ_HANDLED; +} + +static int adc5_fwnode_xlate(struct iio_dev *indio_dev, + const struct fwnode_reference_args *iiospec) +{ + struct adc5_chip *adc = iio_priv(indio_dev); + int i; + + for (i = 0; i < adc->nchannels; i++) + if (adc->chan_props[i].channel == iiospec->args[0]) + return i; + + return -EINVAL; +} + +static int adc7_fwnode_xlate(struct iio_dev *indio_dev, + const struct fwnode_reference_args *iiospec) +{ + struct adc5_chip *adc = iio_priv(indio_dev); + int i, v_channel; + + for (i = 0; i < adc->nchannels; i++) { + v_channel = (adc->chan_props[i].sid << ADC_CHANNEL_OFFSET) | + adc->chan_props[i].channel; + if (v_channel == iiospec->args[0]) + return i; + } + + return -EINVAL; +} + +static int adc_read_raw_common(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, int *val2, + long mask, adc_do_conversion do_conv) +{ + struct adc5_chip *adc = iio_priv(indio_dev); + struct adc5_channel_prop *prop; + u16 adc_code_volt, adc_code_cur; + int ret; + + prop = &adc->chan_props[chan->address]; + + switch (mask) { + case IIO_CHAN_INFO_PROCESSED: + ret = do_conv(adc, prop, chan, + &adc_code_volt, &adc_code_cur); + if (ret) + return ret; + + ret = qcom_adc5_hw_scale(prop->scale_fn_type, + prop->prescale, + adc->data, + adc_code_volt, val); + if (ret) + return ret; + + return IIO_VAL_INT; + default: + return -EINVAL; + } +} + +static int adc5_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, int *val2, + long mask) +{ + return adc_read_raw_common(indio_dev, chan, val, val2, + mask, adc5_do_conversion); +} + +static int adc7_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, int *val2, + long mask) +{ + return adc_read_raw_common(indio_dev, chan, val, val2, + mask, adc7_do_conversion); +} + +static const struct iio_info adc5_info = { + .read_raw = adc5_read_raw, + .fwnode_xlate = adc5_fwnode_xlate, +}; + +static const struct iio_info adc7_info = { + .read_raw = adc7_read_raw, + .fwnode_xlate = adc7_fwnode_xlate, +}; + +struct adc5_channels { + const char *datasheet_name; + unsigned int prescale_index; + enum iio_chan_type type; + long info_mask; + enum vadc_scale_fn_type scale_fn_type; +}; + +/* In these definitions, _pre refers to an index into adc5_prescale_ratios. */ +#define ADC5_CHAN(_dname, _type, _mask, _pre, _scale) \ + { \ + .datasheet_name = _dname, \ + .prescale_index = _pre, \ + .type = _type, \ + .info_mask = _mask, \ + .scale_fn_type = _scale, \ + }, \ + +#define ADC5_CHAN_TEMP(_dname, _pre, _scale) \ + ADC5_CHAN(_dname, IIO_TEMP, \ + BIT(IIO_CHAN_INFO_PROCESSED), \ + _pre, _scale) \ + +#define ADC5_CHAN_VOLT(_dname, _pre, _scale) \ + ADC5_CHAN(_dname, IIO_VOLTAGE, \ + BIT(IIO_CHAN_INFO_PROCESSED), \ + _pre, _scale) \ + +static const struct adc5_channels adc5_chans_pmic[ADC5_MAX_CHANNEL] = { + [ADC5_REF_GND] = ADC5_CHAN_VOLT("ref_gnd", 0, + SCALE_HW_CALIB_DEFAULT) + [ADC5_1P25VREF] = ADC5_CHAN_VOLT("vref_1p25", 0, + SCALE_HW_CALIB_DEFAULT) + [ADC5_VPH_PWR] = ADC5_CHAN_VOLT("vph_pwr", 1, + SCALE_HW_CALIB_DEFAULT) + [ADC5_VBAT_SNS] = ADC5_CHAN_VOLT("vbat_sns", 1, + SCALE_HW_CALIB_DEFAULT) + [ADC5_VCOIN] = ADC5_CHAN_VOLT("vcoin", 1, + SCALE_HW_CALIB_DEFAULT) + [ADC5_DIE_TEMP] = ADC5_CHAN_TEMP("die_temp", 0, + SCALE_HW_CALIB_PMIC_THERM) + [ADC5_USB_IN_I] = ADC5_CHAN_VOLT("usb_in_i_uv", 0, + SCALE_HW_CALIB_DEFAULT) + [ADC5_USB_IN_V_16] = ADC5_CHAN_VOLT("usb_in_v_div_16", 8, + SCALE_HW_CALIB_DEFAULT) + [ADC5_CHG_TEMP] = ADC5_CHAN_TEMP("chg_temp", 0, + SCALE_HW_CALIB_PM5_CHG_TEMP) + /* Charger prescales SBUx and MID_CHG to fit within 1.8V upper unit */ + [ADC5_SBUx] = ADC5_CHAN_VOLT("chg_sbux", 1, + SCALE_HW_CALIB_DEFAULT) + [ADC5_MID_CHG_DIV6] = ADC5_CHAN_VOLT("chg_mid_chg", 3, + SCALE_HW_CALIB_DEFAULT) + [ADC5_XO_THERM_100K_PU] = ADC5_CHAN_TEMP("xo_therm", 0, + SCALE_HW_CALIB_XOTHERM) + [ADC5_AMUX_THM1_100K_PU] = ADC5_CHAN_TEMP("amux_thm1_100k_pu", 0, + SCALE_HW_CALIB_THERM_100K_PULLUP) + [ADC5_AMUX_THM2_100K_PU] = ADC5_CHAN_TEMP("amux_thm2_100k_pu", 0, + SCALE_HW_CALIB_THERM_100K_PULLUP) + [ADC5_AMUX_THM3_100K_PU] = ADC5_CHAN_TEMP("amux_thm3_100k_pu", 0, + SCALE_HW_CALIB_THERM_100K_PULLUP) + [ADC5_AMUX_THM2] = ADC5_CHAN_TEMP("amux_thm2", 0, + SCALE_HW_CALIB_PM5_SMB_TEMP) + [ADC5_GPIO1_100K_PU] = ADC5_CHAN_TEMP("gpio1_100k_pu", 0, + SCALE_HW_CALIB_THERM_100K_PULLUP) + [ADC5_GPIO3_100K_PU] = ADC5_CHAN_TEMP("gpio3_100k_pu", 0, + SCALE_HW_CALIB_THERM_100K_PULLUP) + [ADC5_GPIO4_100K_PU] = ADC5_CHAN_TEMP("gpio4_100k_pu", 0, + SCALE_HW_CALIB_THERM_100K_PULLUP) +}; + +static const struct adc5_channels adc7_chans_pmic[ADC5_MAX_CHANNEL] = { + [ADC7_REF_GND] = ADC5_CHAN_VOLT("ref_gnd", 0, + SCALE_HW_CALIB_DEFAULT) + [ADC7_1P25VREF] = ADC5_CHAN_VOLT("vref_1p25", 0, + SCALE_HW_CALIB_DEFAULT) + [ADC7_VPH_PWR] = ADC5_CHAN_VOLT("vph_pwr", 1, + SCALE_HW_CALIB_DEFAULT) + [ADC7_VBAT_SNS] = ADC5_CHAN_VOLT("vbat_sns", 3, + SCALE_HW_CALIB_DEFAULT) + [ADC7_DIE_TEMP] = ADC5_CHAN_TEMP("die_temp", 0, + SCALE_HW_CALIB_PMIC_THERM_PM7) + [ADC7_AMUX_THM1_100K_PU] = ADC5_CHAN_TEMP("amux_thm1_pu2", 0, + SCALE_HW_CALIB_THERM_100K_PU_PM7) + [ADC7_AMUX_THM2_100K_PU] = ADC5_CHAN_TEMP("amux_thm2_pu2", 0, + SCALE_HW_CALIB_THERM_100K_PU_PM7) + [ADC7_AMUX_THM3_100K_PU] = ADC5_CHAN_TEMP("amux_thm3_pu2", 0, + SCALE_HW_CALIB_THERM_100K_PU_PM7) + [ADC7_AMUX_THM4_100K_PU] = ADC5_CHAN_TEMP("amux_thm4_pu2", 0, + SCALE_HW_CALIB_THERM_100K_PU_PM7) + [ADC7_AMUX_THM5_100K_PU] = ADC5_CHAN_TEMP("amux_thm5_pu2", 0, + SCALE_HW_CALIB_THERM_100K_PU_PM7) + [ADC7_AMUX_THM6_100K_PU] = ADC5_CHAN_TEMP("amux_thm6_pu2", 0, + SCALE_HW_CALIB_THERM_100K_PU_PM7) + [ADC7_GPIO1_100K_PU] = ADC5_CHAN_TEMP("gpio1_pu2", 0, + SCALE_HW_CALIB_THERM_100K_PU_PM7) + [ADC7_GPIO2_100K_PU] = ADC5_CHAN_TEMP("gpio2_pu2", 0, + SCALE_HW_CALIB_THERM_100K_PU_PM7) + [ADC7_GPIO3_100K_PU] = ADC5_CHAN_TEMP("gpio3_pu2", 0, + SCALE_HW_CALIB_THERM_100K_PU_PM7) + [ADC7_GPIO4_100K_PU] = ADC5_CHAN_TEMP("gpio4_pu2", 0, + SCALE_HW_CALIB_THERM_100K_PU_PM7) +}; + +static const struct adc5_channels adc5_chans_rev2[ADC5_MAX_CHANNEL] = { + [ADC5_REF_GND] = ADC5_CHAN_VOLT("ref_gnd", 0, + SCALE_HW_CALIB_DEFAULT) + [ADC5_1P25VREF] = ADC5_CHAN_VOLT("vref_1p25", 0, + SCALE_HW_CALIB_DEFAULT) + [ADC5_VREF_VADC] = ADC5_CHAN_VOLT("vref_vadc", 0, + SCALE_HW_CALIB_DEFAULT) + [ADC5_VPH_PWR] = ADC5_CHAN_VOLT("vph_pwr", 1, + SCALE_HW_CALIB_DEFAULT) + [ADC5_VBAT_SNS] = ADC5_CHAN_VOLT("vbat_sns", 1, + SCALE_HW_CALIB_DEFAULT) + [ADC5_VCOIN] = ADC5_CHAN_VOLT("vcoin", 1, + SCALE_HW_CALIB_DEFAULT) + [ADC5_DIE_TEMP] = ADC5_CHAN_TEMP("die_temp", 0, + SCALE_HW_CALIB_PMIC_THERM) + [ADC5_AMUX_THM1_100K_PU] = ADC5_CHAN_TEMP("amux_thm1_100k_pu", 0, + SCALE_HW_CALIB_THERM_100K_PULLUP) + [ADC5_AMUX_THM2_100K_PU] = ADC5_CHAN_TEMP("amux_thm2_100k_pu", 0, + SCALE_HW_CALIB_THERM_100K_PULLUP) + [ADC5_AMUX_THM3_100K_PU] = ADC5_CHAN_TEMP("amux_thm3_100k_pu", 0, + SCALE_HW_CALIB_THERM_100K_PULLUP) + [ADC5_AMUX_THM4_100K_PU] = ADC5_CHAN_TEMP("amux_thm4_100k_pu", 0, + SCALE_HW_CALIB_THERM_100K_PULLUP) + [ADC5_AMUX_THM5_100K_PU] = ADC5_CHAN_TEMP("amux_thm5_100k_pu", 0, + SCALE_HW_CALIB_THERM_100K_PULLUP) + [ADC5_XO_THERM_100K_PU] = ADC5_CHAN_TEMP("xo_therm_100k_pu", 0, + SCALE_HW_CALIB_THERM_100K_PULLUP) +}; + +static int adc5_get_fw_channel_data(struct adc5_chip *adc, + struct adc5_channel_prop *prop, + struct fwnode_handle *fwnode, + const struct adc5_data *data) +{ + const char *channel_name; + char *name; + u32 chan, value, varr[2]; + u32 sid = 0; + int ret; + struct device *dev = adc->dev; + + name = devm_kasprintf(dev, GFP_KERNEL, "%pfwP", fwnode); + if (!name) + return -ENOMEM; + + /* Cut the address part */ + name[strchrnul(name, '@') - name] = '\0'; + + ret = fwnode_property_read_u32(fwnode, "reg", &chan); + if (ret) { + dev_err(dev, "invalid channel number %s\n", name); + return ret; + } + + /* Value read from "reg" is virtual channel number */ + + /* virtual channel number = sid << 8 | channel number */ + + if (adc->data->info == &adc7_info) { + sid = chan >> ADC_CHANNEL_OFFSET; + chan = chan & ADC_CHANNEL_MASK; + } + + if (chan > ADC5_PARALLEL_ISENSE_VBAT_IDATA || + !data->adc_chans[chan].datasheet_name) { + dev_err(dev, "%s invalid channel number %d\n", name, chan); + return -EINVAL; + } + + /* the channel has DT description */ + prop->channel = chan; + prop->sid = sid; + + ret = fwnode_property_read_string(fwnode, "label", &channel_name); + if (ret) + channel_name = name; + + prop->datasheet_name = channel_name; + + ret = fwnode_property_read_u32(fwnode, "qcom,decimation", &value); + if (!ret) { + ret = qcom_adc5_decimation_from_dt(value, data->decimation); + if (ret < 0) { + dev_err(dev, "%02x invalid decimation %d\n", + chan, value); + return ret; + } + prop->decimation = ret; + } else { + prop->decimation = ADC5_DECIMATION_DEFAULT; + } + + ret = fwnode_property_read_u32_array(fwnode, "qcom,pre-scaling", varr, 2); + if (!ret) { + ret = qcom_adc5_prescaling_from_dt(varr[0], varr[1]); + if (ret < 0) { + dev_err(dev, "%02x invalid pre-scaling <%d %d>\n", + chan, varr[0], varr[1]); + return ret; + } + prop->prescale = ret; + } else { + prop->prescale = + adc->data->adc_chans[prop->channel].prescale_index; + } + + ret = fwnode_property_read_u32(fwnode, "qcom,hw-settle-time", &value); + if (!ret) { + u8 dig_version[2]; + + ret = adc5_read(adc, ADC5_USR_REVISION1, dig_version, + sizeof(dig_version)); + if (ret) { + dev_err(dev, "Invalid dig version read %d\n", ret); + return ret; + } + + dev_dbg(dev, "dig_ver:minor:%d, major:%d\n", dig_version[0], + dig_version[1]); + /* Digital controller >= 5.3 have hw_settle_2 option */ + if ((dig_version[0] >= ADC5_HW_SETTLE_DIFF_MINOR && + dig_version[1] >= ADC5_HW_SETTLE_DIFF_MAJOR) || + adc->data->info == &adc7_info) + ret = qcom_adc5_hw_settle_time_from_dt(value, data->hw_settle_2); + else + ret = qcom_adc5_hw_settle_time_from_dt(value, data->hw_settle_1); + + if (ret < 0) { + dev_err(dev, "%02x invalid hw-settle-time %d us\n", + chan, value); + return ret; + } + prop->hw_settle_time = ret; + } else { + prop->hw_settle_time = VADC_DEF_HW_SETTLE_TIME; + } + + ret = fwnode_property_read_u32(fwnode, "qcom,avg-samples", &value); + if (!ret) { + ret = qcom_adc5_avg_samples_from_dt(value); + if (ret < 0) { + dev_err(dev, "%02x invalid avg-samples %d\n", + chan, value); + return ret; + } + prop->avg_samples = ret; + } else { + prop->avg_samples = VADC_DEF_AVG_SAMPLES; + } + + if (fwnode_property_read_bool(fwnode, "qcom,ratiometric")) + prop->cal_method = ADC5_RATIOMETRIC_CAL; + else + prop->cal_method = ADC5_ABSOLUTE_CAL; + + /* + * Default to using timer calibration. Using a fresh calibration value + * for every conversion will increase the overall time for a request. + */ + prop->cal_val = ADC5_TIMER_CAL; + + dev_dbg(dev, "%02x name %s\n", chan, name); + + return 0; +} + +static const struct adc5_data adc5_data_pmic = { + .full_scale_code_volt = 0x70e4, + .full_scale_code_cur = 0x2710, + .adc_chans = adc5_chans_pmic, + .info = &adc5_info, + .decimation = (unsigned int [ADC5_DECIMATION_SAMPLES_MAX]) + {250, 420, 840}, + .hw_settle_1 = (unsigned int [VADC_HW_SETTLE_SAMPLES_MAX]) + {15, 100, 200, 300, 400, 500, 600, 700, + 800, 900, 1, 2, 4, 6, 8, 10}, + .hw_settle_2 = (unsigned int [VADC_HW_SETTLE_SAMPLES_MAX]) + {15, 100, 200, 300, 400, 500, 600, 700, + 1, 2, 4, 8, 16, 32, 64, 128}, +}; + +static const struct adc5_data adc7_data_pmic = { + .full_scale_code_volt = 0x70e4, + .adc_chans = adc7_chans_pmic, + .info = &adc7_info, + .decimation = (unsigned int [ADC5_DECIMATION_SAMPLES_MAX]) + {85, 340, 1360}, + .hw_settle_2 = (unsigned int [VADC_HW_SETTLE_SAMPLES_MAX]) + {15, 100, 200, 300, 400, 500, 600, 700, + 1000, 2000, 4000, 8000, 16000, 32000, + 64000, 128000}, +}; + +static const struct adc5_data adc5_data_pmic_rev2 = { + .full_scale_code_volt = 0x4000, + .full_scale_code_cur = 0x1800, + .adc_chans = adc5_chans_rev2, + .info = &adc5_info, + .decimation = (unsigned int [ADC5_DECIMATION_SAMPLES_MAX]) + {256, 512, 1024}, + .hw_settle_1 = (unsigned int [VADC_HW_SETTLE_SAMPLES_MAX]) + {0, 100, 200, 300, 400, 500, 600, 700, + 800, 900, 1, 2, 4, 6, 8, 10}, + .hw_settle_2 = (unsigned int [VADC_HW_SETTLE_SAMPLES_MAX]) + {15, 100, 200, 300, 400, 500, 600, 700, + 1, 2, 4, 8, 16, 32, 64, 128}, +}; + +static const struct of_device_id adc5_match_table[] = { + { + .compatible = "qcom,spmi-adc5", + .data = &adc5_data_pmic, + }, + { + .compatible = "qcom,spmi-adc7", + .data = &adc7_data_pmic, + }, + { + .compatible = "qcom,spmi-adc-rev2", + .data = &adc5_data_pmic_rev2, + }, + { } +}; +MODULE_DEVICE_TABLE(of, adc5_match_table); + +static int adc5_get_fw_data(struct adc5_chip *adc) +{ + const struct adc5_channels *adc_chan; + struct iio_chan_spec *iio_chan; + struct adc5_channel_prop prop, *chan_props; + struct fwnode_handle *child; + unsigned int index = 0; + int ret; + + adc->nchannels = device_get_child_node_count(adc->dev); + if (!adc->nchannels) + return -EINVAL; + + adc->iio_chans = devm_kcalloc(adc->dev, adc->nchannels, + sizeof(*adc->iio_chans), GFP_KERNEL); + if (!adc->iio_chans) + return -ENOMEM; + + adc->chan_props = devm_kcalloc(adc->dev, adc->nchannels, + sizeof(*adc->chan_props), GFP_KERNEL); + if (!adc->chan_props) + return -ENOMEM; + + chan_props = adc->chan_props; + iio_chan = adc->iio_chans; + adc->data = device_get_match_data(adc->dev); + if (!adc->data) + adc->data = &adc5_data_pmic; + + device_for_each_child_node(adc->dev, child) { + ret = adc5_get_fw_channel_data(adc, &prop, child, adc->data); + if (ret) { + fwnode_handle_put(child); + return ret; + } + + prop.scale_fn_type = + adc->data->adc_chans[prop.channel].scale_fn_type; + *chan_props = prop; + adc_chan = &adc->data->adc_chans[prop.channel]; + + iio_chan->channel = prop.channel; + iio_chan->datasheet_name = prop.datasheet_name; + iio_chan->extend_name = prop.datasheet_name; + iio_chan->info_mask_separate = adc_chan->info_mask; + iio_chan->type = adc_chan->type; + iio_chan->address = index; + iio_chan++; + chan_props++; + index++; + } + + return 0; +} + +static int adc5_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct iio_dev *indio_dev; + struct adc5_chip *adc; + struct regmap *regmap; + int ret, irq_eoc; + u32 reg; + + regmap = dev_get_regmap(dev->parent, NULL); + if (!regmap) + return -ENODEV; + + ret = device_property_read_u32(dev, "reg", ®); + if (ret < 0) + return ret; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*adc)); + if (!indio_dev) + return -ENOMEM; + + adc = iio_priv(indio_dev); + adc->regmap = regmap; + adc->dev = dev; + adc->base = reg; + + init_completion(&adc->complete); + mutex_init(&adc->lock); + + ret = adc5_get_fw_data(adc); + if (ret) { + dev_err(dev, "adc get dt data failed\n"); + return ret; + } + + irq_eoc = platform_get_irq(pdev, 0); + if (irq_eoc < 0) { + if (irq_eoc == -EPROBE_DEFER || irq_eoc == -EINVAL) + return irq_eoc; + adc->poll_eoc = true; + } else { + ret = devm_request_irq(dev, irq_eoc, adc5_isr, 0, + "pm-adc5", adc); + if (ret) + return ret; + } + + indio_dev->name = pdev->name; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->info = adc->data->info; + indio_dev->channels = adc->iio_chans; + indio_dev->num_channels = adc->nchannels; + + return devm_iio_device_register(dev, indio_dev); +} + +static struct platform_driver adc5_driver = { + .driver = { + .name = "qcom-spmi-adc5", + .of_match_table = adc5_match_table, + }, + .probe = adc5_probe, +}; +module_platform_driver(adc5_driver); + +MODULE_ALIAS("platform:qcom-spmi-adc5"); +MODULE_DESCRIPTION("Qualcomm Technologies Inc. PMIC5 ADC driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3