From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/message/fusion/Kconfig | 124 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 124 insertions(+) create mode 100644 drivers/message/fusion/Kconfig (limited to 'drivers/message/fusion/Kconfig') diff --git a/drivers/message/fusion/Kconfig b/drivers/message/fusion/Kconfig new file mode 100644 index 000000000..a3d0288fd --- /dev/null +++ b/drivers/message/fusion/Kconfig @@ -0,0 +1,124 @@ +# SPDX-License-Identifier: GPL-2.0-only + +menuconfig FUSION + bool "Fusion MPT device support" + depends on PCI + help + Say Y here to get to see options for Fusion Message + Passing Technology (MPT) drivers. + This option alone does not add any kernel code. + + If you say N, all options in this submenu will be skipped and disabled. + +if FUSION + +config FUSION_SPI + tristate "Fusion MPT ScsiHost drivers for SPI" + depends on PCI && SCSI + select SCSI_SPI_ATTRS + help + SCSI HOST support for a parallel SCSI host adapters. + + List of supported controllers: + + LSI53C1020 + LSI53C1020A + LSI53C1030 + LSI53C1035 + ATTO UL4D + +config FUSION_FC + tristate "Fusion MPT ScsiHost drivers for FC" + depends on PCI && SCSI + depends on SCSI_FC_ATTRS + help + SCSI HOST support for a Fiber Channel host adapters. + + List of supported controllers: + + LSIFC909 + LSIFC919 + LSIFC919X + LSIFC929 + LSIFC929X + LSIFC929XL + LSIFC949X + LSIFC949E + Brocade FC 410/420 + +config FUSION_SAS + tristate "Fusion MPT ScsiHost drivers for SAS" + depends on PCI && SCSI + select SCSI_SAS_ATTRS + help + SCSI HOST support for a SAS host adapters. + + List of supported controllers: + + LSISAS1064 + LSISAS1068 + LSISAS1064E + LSISAS1068E + LSISAS1078 + +config FUSION_MAX_SGE + int "Maximum number of scatter gather entries (16 - 128)" + default "128" + range 16 128 + help + This option allows you to specify the maximum number of scatter- + gather entries per I/O. The driver default is 128, which matches + SCSI_MAX_PHYS_SEGMENTS. However, it may decreased down to 16. + Decreasing this parameter will reduce memory requirements + on a per controller instance. + +config FUSION_CTL + tristate "Fusion MPT misc device (ioctl) driver" + depends on FUSION_SPI || FUSION_FC || FUSION_SAS + help + The Fusion MPT misc device driver provides specialized control + of MPT adapters via system ioctl calls. Use of ioctl calls to + the MPT driver requires that you create and use a misc device + node ala: + mknod /dev/mptctl c 10 240 + + One use of this ioctl interface is to perform an upgrade (reflash) + of the MPT adapter firmware. Refer to readme file(s) distributed + with the Fusion MPT linux driver for additional details. + + If enabled by saying M to this, a driver named: mptctl + will be compiled. + + If unsure whether you really want or need this, say N. + +config FUSION_LAN + tristate "Fusion MPT LAN driver" + depends on FUSION_FC && NET_FC + help + This module supports LAN IP traffic over Fibre Channel port(s) + on Fusion MPT compatible hardware (LSIFC9xx chips). + The physical interface used is defined in RFC 2625. + Please refer to that document for details. + + Installing this driver requires the knowledge to configure and + activate a new network interface, "fc0", using standard Linux tools. + + If enabled by saying M to this, a driver named: mptlan + will be compiled. + + If unsure whether you really want or need this, say N. + +config FUSION_LOGGING + bool "Fusion MPT logging facility" + help + This turns on a logging facility that can be used to debug a number + of Fusion MPT related problems. + + The debug level can be programmed on the fly via SysFS (hex values) + + echo [level] > /sys/class/scsi_host/host#/debug_level + + There are various debug levels that can be found in the source: + file:drivers/message/fusion/mptdebug.h + +endif # FUSION -- cgit v1.2.3