From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/net/mdio/mdio-bcm-unimac.c | 361 +++++++++++++++++++++++++++++++++++++ 1 file changed, 361 insertions(+) create mode 100644 drivers/net/mdio/mdio-bcm-unimac.c (limited to 'drivers/net/mdio/mdio-bcm-unimac.c') diff --git a/drivers/net/mdio/mdio-bcm-unimac.c b/drivers/net/mdio/mdio-bcm-unimac.c new file mode 100644 index 000000000..bfc9be23c --- /dev/null +++ b/drivers/net/mdio/mdio-bcm-unimac.c @@ -0,0 +1,361 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Broadcom UniMAC MDIO bus controller driver + * + * Copyright (C) 2014-2017 Broadcom + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MDIO_CMD 0x00 +#define MDIO_START_BUSY (1 << 29) +#define MDIO_READ_FAIL (1 << 28) +#define MDIO_RD (2 << 26) +#define MDIO_WR (1 << 26) +#define MDIO_PMD_SHIFT 21 +#define MDIO_PMD_MASK 0x1F +#define MDIO_REG_SHIFT 16 +#define MDIO_REG_MASK 0x1F + +#define MDIO_CFG 0x04 +#define MDIO_C22 (1 << 0) +#define MDIO_C45 0 +#define MDIO_CLK_DIV_SHIFT 4 +#define MDIO_CLK_DIV_MASK 0x3F +#define MDIO_SUPP_PREAMBLE (1 << 12) + +struct unimac_mdio_priv { + struct mii_bus *mii_bus; + void __iomem *base; + int (*wait_func) (void *wait_func_data); + void *wait_func_data; + struct clk *clk; + u32 clk_freq; +}; + +static inline u32 unimac_mdio_readl(struct unimac_mdio_priv *priv, u32 offset) +{ + /* MIPS chips strapped for BE will automagically configure the + * peripheral registers for CPU-native byte order. + */ + if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN)) + return __raw_readl(priv->base + offset); + else + return readl_relaxed(priv->base + offset); +} + +static inline void unimac_mdio_writel(struct unimac_mdio_priv *priv, u32 val, + u32 offset) +{ + if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN)) + __raw_writel(val, priv->base + offset); + else + writel_relaxed(val, priv->base + offset); +} + +static inline void unimac_mdio_start(struct unimac_mdio_priv *priv) +{ + u32 reg; + + reg = unimac_mdio_readl(priv, MDIO_CMD); + reg |= MDIO_START_BUSY; + unimac_mdio_writel(priv, reg, MDIO_CMD); +} + +static inline unsigned int unimac_mdio_busy(struct unimac_mdio_priv *priv) +{ + return unimac_mdio_readl(priv, MDIO_CMD) & MDIO_START_BUSY; +} + +static int unimac_mdio_poll(void *wait_func_data) +{ + struct unimac_mdio_priv *priv = wait_func_data; + unsigned int timeout = 1000; + + do { + if (!unimac_mdio_busy(priv)) + return 0; + + usleep_range(1000, 2000); + } while (--timeout); + + return -ETIMEDOUT; +} + +static int unimac_mdio_read(struct mii_bus *bus, int phy_id, int reg) +{ + struct unimac_mdio_priv *priv = bus->priv; + int ret; + u32 cmd; + + /* Prepare the read operation */ + cmd = MDIO_RD | (phy_id << MDIO_PMD_SHIFT) | (reg << MDIO_REG_SHIFT); + unimac_mdio_writel(priv, cmd, MDIO_CMD); + + /* Start MDIO transaction */ + unimac_mdio_start(priv); + + ret = priv->wait_func(priv->wait_func_data); + if (ret) + return ret; + + cmd = unimac_mdio_readl(priv, MDIO_CMD); + + /* Some broken devices are known not to release the line during + * turn-around, e.g: Broadcom BCM53125 external switches, so check for + * that condition here and ignore the MDIO controller read failure + * indication. + */ + if (!(bus->phy_ignore_ta_mask & 1 << phy_id) && (cmd & MDIO_READ_FAIL)) + return -EIO; + + return cmd & 0xffff; +} + +static int unimac_mdio_write(struct mii_bus *bus, int phy_id, + int reg, u16 val) +{ + struct unimac_mdio_priv *priv = bus->priv; + u32 cmd; + + /* Prepare the write operation */ + cmd = MDIO_WR | (phy_id << MDIO_PMD_SHIFT) | + (reg << MDIO_REG_SHIFT) | (0xffff & val); + unimac_mdio_writel(priv, cmd, MDIO_CMD); + + unimac_mdio_start(priv); + + return priv->wait_func(priv->wait_func_data); +} + +/* Workaround for integrated BCM7xxx Gigabit PHYs which have a problem with + * their internal MDIO management controller making them fail to successfully + * be read from or written to for the first transaction. We insert a dummy + * BMSR read here to make sure that phy_get_device() and get_phy_id() can + * correctly read the PHY MII_PHYSID1/2 registers and successfully register a + * PHY device for this peripheral. + * + * Once the PHY driver is registered, we can workaround subsequent reads from + * there (e.g: during system-wide power management). + * + * bus->reset is invoked before mdiobus_scan during mdiobus_register and is + * therefore the right location to stick that workaround. Since we do not want + * to read from non-existing PHYs, we either use bus->phy_mask or do a manual + * Device Tree scan to limit the search area. + */ +static int unimac_mdio_reset(struct mii_bus *bus) +{ + struct device_node *np = bus->dev.of_node; + struct device_node *child; + u32 read_mask = 0; + int addr; + + if (!np) { + read_mask = ~bus->phy_mask; + } else { + for_each_available_child_of_node(np, child) { + addr = of_mdio_parse_addr(&bus->dev, child); + if (addr < 0) + continue; + + read_mask |= 1 << addr; + } + } + + for (addr = 0; addr < PHY_MAX_ADDR; addr++) { + if (read_mask & 1 << addr) { + dev_dbg(&bus->dev, "Workaround for PHY @ %d\n", addr); + mdiobus_read(bus, addr, MII_BMSR); + } + } + + return 0; +} + +static void unimac_mdio_clk_set(struct unimac_mdio_priv *priv) +{ + unsigned long rate; + u32 reg, div; + + /* Keep the hardware default values */ + if (!priv->clk_freq) + return; + + if (!priv->clk) + rate = 250000000; + else + rate = clk_get_rate(priv->clk); + + div = (rate / (2 * priv->clk_freq)) - 1; + if (div & ~MDIO_CLK_DIV_MASK) { + pr_warn("Incorrect MDIO clock frequency, ignoring\n"); + return; + } + + /* The MDIO clock is the reference clock (typically 250Mhz) divided by + * 2 x (MDIO_CLK_DIV + 1) + */ + reg = unimac_mdio_readl(priv, MDIO_CFG); + reg &= ~(MDIO_CLK_DIV_MASK << MDIO_CLK_DIV_SHIFT); + reg |= div << MDIO_CLK_DIV_SHIFT; + unimac_mdio_writel(priv, reg, MDIO_CFG); +} + +static int unimac_mdio_probe(struct platform_device *pdev) +{ + struct unimac_mdio_pdata *pdata = pdev->dev.platform_data; + struct unimac_mdio_priv *priv; + struct device_node *np; + struct mii_bus *bus; + struct resource *r; + int ret; + + np = pdev->dev.of_node; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!r) + return -EINVAL; + + /* Just ioremap, as this MDIO block is usually integrated into an + * Ethernet MAC controller register range + */ + priv->base = devm_ioremap(&pdev->dev, r->start, resource_size(r)); + if (!priv->base) { + dev_err(&pdev->dev, "failed to remap register\n"); + return -ENOMEM; + } + + priv->clk = devm_clk_get_optional(&pdev->dev, NULL); + if (IS_ERR(priv->clk)) + return PTR_ERR(priv->clk); + + ret = clk_prepare_enable(priv->clk); + if (ret) + return ret; + + if (of_property_read_u32(np, "clock-frequency", &priv->clk_freq)) + priv->clk_freq = 0; + + unimac_mdio_clk_set(priv); + + priv->mii_bus = mdiobus_alloc(); + if (!priv->mii_bus) { + ret = -ENOMEM; + goto out_clk_disable; + } + + bus = priv->mii_bus; + bus->priv = priv; + if (pdata) { + bus->name = pdata->bus_name; + priv->wait_func = pdata->wait_func; + priv->wait_func_data = pdata->wait_func_data; + bus->phy_mask = ~pdata->phy_mask; + } else { + bus->name = "unimac MII bus"; + priv->wait_func_data = priv; + priv->wait_func = unimac_mdio_poll; + } + bus->parent = &pdev->dev; + bus->read = unimac_mdio_read; + bus->write = unimac_mdio_write; + bus->reset = unimac_mdio_reset; + snprintf(bus->id, MII_BUS_ID_SIZE, "%s-%d", pdev->name, pdev->id); + + ret = of_mdiobus_register(bus, np); + if (ret) { + dev_err(&pdev->dev, "MDIO bus registration failed\n"); + goto out_mdio_free; + } + + platform_set_drvdata(pdev, priv); + + dev_info(&pdev->dev, "Broadcom UniMAC MDIO bus\n"); + + return 0; + +out_mdio_free: + mdiobus_free(bus); +out_clk_disable: + clk_disable_unprepare(priv->clk); + return ret; +} + +static int unimac_mdio_remove(struct platform_device *pdev) +{ + struct unimac_mdio_priv *priv = platform_get_drvdata(pdev); + + mdiobus_unregister(priv->mii_bus); + mdiobus_free(priv->mii_bus); + clk_disable_unprepare(priv->clk); + + return 0; +} + +static int __maybe_unused unimac_mdio_suspend(struct device *d) +{ + struct unimac_mdio_priv *priv = dev_get_drvdata(d); + + clk_disable_unprepare(priv->clk); + + return 0; +} + +static int __maybe_unused unimac_mdio_resume(struct device *d) +{ + struct unimac_mdio_priv *priv = dev_get_drvdata(d); + int ret; + + ret = clk_prepare_enable(priv->clk); + if (ret) + return ret; + + unimac_mdio_clk_set(priv); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(unimac_mdio_pm_ops, + unimac_mdio_suspend, unimac_mdio_resume); + +static const struct of_device_id unimac_mdio_ids[] = { + { .compatible = "brcm,genet-mdio-v5", }, + { .compatible = "brcm,genet-mdio-v4", }, + { .compatible = "brcm,genet-mdio-v3", }, + { .compatible = "brcm,genet-mdio-v2", }, + { .compatible = "brcm,genet-mdio-v1", }, + { .compatible = "brcm,unimac-mdio", }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, unimac_mdio_ids); + +static struct platform_driver unimac_mdio_driver = { + .driver = { + .name = UNIMAC_MDIO_DRV_NAME, + .of_match_table = unimac_mdio_ids, + .pm = &unimac_mdio_pm_ops, + }, + .probe = unimac_mdio_probe, + .remove = unimac_mdio_remove, +}; +module_platform_driver(unimac_mdio_driver); + +MODULE_AUTHOR("Broadcom Corporation"); +MODULE_DESCRIPTION("Broadcom UniMAC MDIO bus controller"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" UNIMAC_MDIO_DRV_NAME); -- cgit v1.2.3