From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001
From: Daniel Baumann <daniel.baumann@progress-linux.org>
Date: Sun, 7 Apr 2024 20:49:45 +0200
Subject: Adding upstream version 6.1.76.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
---
 drivers/pci/pci-bridge-emul.c | 621 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 621 insertions(+)
 create mode 100644 drivers/pci/pci-bridge-emul.c

(limited to 'drivers/pci/pci-bridge-emul.c')

diff --git a/drivers/pci/pci-bridge-emul.c b/drivers/pci/pci-bridge-emul.c
new file mode 100644
index 000000000..9334b2dd4
--- /dev/null
+++ b/drivers/pci/pci-bridge-emul.c
@@ -0,0 +1,621 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Marvell
+ *
+ * Author: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
+ *
+ * This file helps PCI controller drivers implement a fake root port
+ * PCI bridge when the HW doesn't provide such a root port PCI
+ * bridge.
+ *
+ * It emulates a PCI bridge by providing a fake PCI configuration
+ * space (and optionally a PCIe capability configuration space) in
+ * memory. By default the read/write operations simply read and update
+ * this fake configuration space in memory. However, PCI controller
+ * drivers can provide through the 'struct pci_sw_bridge_ops'
+ * structure a set of operations to override or complement this
+ * default behavior.
+ */
+
+#include <linux/pci.h>
+#include "pci-bridge-emul.h"
+
+#define PCI_BRIDGE_CONF_END	PCI_STD_HEADER_SIZEOF
+#define PCI_CAP_SSID_SIZEOF	(PCI_SSVID_DEVICE_ID + 2)
+#define PCI_CAP_PCIE_SIZEOF	(PCI_EXP_SLTSTA2 + 2)
+
+/**
+ * struct pci_bridge_reg_behavior - register bits behaviors
+ * @ro:		Read-Only bits
+ * @rw:		Read-Write bits
+ * @w1c:	Write-1-to-Clear bits
+ *
+ * Reads and Writes will be filtered by specified behavior. All other bits not
+ * declared are assumed 'Reserved' and will return 0 on reads, per PCIe 5.0:
+ * "Reserved register fields must be read only and must return 0 (all 0's for
+ * multi-bit fields) when read".
+ */
+struct pci_bridge_reg_behavior {
+	/* Read-only bits */
+	u32 ro;
+
+	/* Read-write bits */
+	u32 rw;
+
+	/* Write-1-to-clear bits */
+	u32 w1c;
+};
+
+static const
+struct pci_bridge_reg_behavior pci_regs_behavior[PCI_STD_HEADER_SIZEOF / 4] = {
+	[PCI_VENDOR_ID / 4] = { .ro = ~0 },
+	[PCI_COMMAND / 4] = {
+		.rw = (PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
+		       PCI_COMMAND_MASTER | PCI_COMMAND_PARITY |
+		       PCI_COMMAND_SERR),
+		.ro = ((PCI_COMMAND_SPECIAL | PCI_COMMAND_INVALIDATE |
+			PCI_COMMAND_VGA_PALETTE | PCI_COMMAND_WAIT |
+			PCI_COMMAND_FAST_BACK) |
+		       (PCI_STATUS_CAP_LIST | PCI_STATUS_66MHZ |
+			PCI_STATUS_FAST_BACK | PCI_STATUS_DEVSEL_MASK) << 16),
+		.w1c = PCI_STATUS_ERROR_BITS << 16,
+	},
+	[PCI_CLASS_REVISION / 4] = { .ro = ~0 },
+
+	/*
+	 * Cache Line Size register: implement as read-only, we do not
+	 * pretend implementing "Memory Write and Invalidate"
+	 * transactions"
+	 *
+	 * Latency Timer Register: implemented as read-only, as "A
+	 * bridge that is not capable of a burst transfer of more than
+	 * two data phases on its primary interface is permitted to
+	 * hardwire the Latency Timer to a value of 16 or less"
+	 *
+	 * Header Type: always read-only
+	 *
+	 * BIST register: implemented as read-only, as "A bridge that
+	 * does not support BIST must implement this register as a
+	 * read-only register that returns 0 when read"
+	 */
+	[PCI_CACHE_LINE_SIZE / 4] = { .ro = ~0 },
+
+	/*
+	 * Base Address registers not used must be implemented as
+	 * read-only registers that return 0 when read.
+	 */
+	[PCI_BASE_ADDRESS_0 / 4] = { .ro = ~0 },
+	[PCI_BASE_ADDRESS_1 / 4] = { .ro = ~0 },
+
+	[PCI_PRIMARY_BUS / 4] = {
+		/* Primary, secondary and subordinate bus are RW */
+		.rw = GENMASK(24, 0),
+		/* Secondary latency is read-only */
+		.ro = GENMASK(31, 24),
+	},
+
+	[PCI_IO_BASE / 4] = {
+		/* The high four bits of I/O base/limit are RW */
+		.rw = (GENMASK(15, 12) | GENMASK(7, 4)),
+
+		/* The low four bits of I/O base/limit are RO */
+		.ro = (((PCI_STATUS_66MHZ | PCI_STATUS_FAST_BACK |
+			 PCI_STATUS_DEVSEL_MASK) << 16) |
+		       GENMASK(11, 8) | GENMASK(3, 0)),
+
+		.w1c = PCI_STATUS_ERROR_BITS << 16,
+	},
+
+	[PCI_MEMORY_BASE / 4] = {
+		/* The high 12-bits of mem base/limit are RW */
+		.rw = GENMASK(31, 20) | GENMASK(15, 4),
+
+		/* The low four bits of mem base/limit are RO */
+		.ro = GENMASK(19, 16) | GENMASK(3, 0),
+	},
+
+	[PCI_PREF_MEMORY_BASE / 4] = {
+		/* The high 12-bits of pref mem base/limit are RW */
+		.rw = GENMASK(31, 20) | GENMASK(15, 4),
+
+		/* The low four bits of pref mem base/limit are RO */
+		.ro = GENMASK(19, 16) | GENMASK(3, 0),
+	},
+
+	[PCI_PREF_BASE_UPPER32 / 4] = {
+		.rw = ~0,
+	},
+
+	[PCI_PREF_LIMIT_UPPER32 / 4] = {
+		.rw = ~0,
+	},
+
+	[PCI_IO_BASE_UPPER16 / 4] = {
+		.rw = ~0,
+	},
+
+	[PCI_CAPABILITY_LIST / 4] = {
+		.ro = GENMASK(7, 0),
+	},
+
+	/*
+	 * If expansion ROM is unsupported then ROM Base Address register must
+	 * be implemented as read-only register that return 0 when read, same
+	 * as for unused Base Address registers.
+	 */
+	[PCI_ROM_ADDRESS1 / 4] = {
+		.ro = ~0,
+	},
+
+	/*
+	 * Interrupt line (bits 7:0) are RW, interrupt pin (bits 15:8)
+	 * are RO, and bridge control (31:16) are a mix of RW, RO,
+	 * reserved and W1C bits
+	 */
+	[PCI_INTERRUPT_LINE / 4] = {
+		/* Interrupt line is RW */
+		.rw = (GENMASK(7, 0) |
+		       ((PCI_BRIDGE_CTL_PARITY |
+			 PCI_BRIDGE_CTL_SERR |
+			 PCI_BRIDGE_CTL_ISA |
+			 PCI_BRIDGE_CTL_VGA |
+			 PCI_BRIDGE_CTL_MASTER_ABORT |
+			 PCI_BRIDGE_CTL_BUS_RESET |
+			 BIT(8) | BIT(9) | BIT(11)) << 16)),
+
+		/* Interrupt pin is RO */
+		.ro = (GENMASK(15, 8) | ((PCI_BRIDGE_CTL_FAST_BACK) << 16)),
+
+		.w1c = BIT(10) << 16,
+	},
+};
+
+static const
+struct pci_bridge_reg_behavior pcie_cap_regs_behavior[PCI_CAP_PCIE_SIZEOF / 4] = {
+	[PCI_CAP_LIST_ID / 4] = {
+		/*
+		 * Capability ID, Next Capability Pointer and
+		 * bits [14:0] of Capabilities register are all read-only.
+		 * Bit 15 of Capabilities register is reserved.
+		 */
+		.ro = GENMASK(30, 0),
+	},
+
+	[PCI_EXP_DEVCAP / 4] = {
+		/*
+		 * Bits [31:29] and [17:16] are reserved.
+		 * Bits [27:18] are reserved for non-upstream ports.
+		 * Bits 28 and [14:6] are reserved for non-endpoint devices.
+		 * Other bits are read-only.
+		 */
+		.ro = BIT(15) | GENMASK(5, 0),
+	},
+
+	[PCI_EXP_DEVCTL / 4] = {
+		/*
+		 * Device control register is RW, except bit 15 which is
+		 * reserved for non-endpoints or non-PCIe-to-PCI/X bridges.
+		 */
+		.rw = GENMASK(14, 0),
+
+		/*
+		 * Device status register has bits 6 and [3:0] W1C, [5:4] RO,
+		 * the rest is reserved. Also bit 6 is reserved for non-upstream
+		 * ports.
+		 */
+		.w1c = GENMASK(3, 0) << 16,
+		.ro = GENMASK(5, 4) << 16,
+	},
+
+	[PCI_EXP_LNKCAP / 4] = {
+		/*
+		 * All bits are RO, except bit 23 which is reserved and
+		 * bit 18 which is reserved for non-upstream ports.
+		 */
+		.ro = lower_32_bits(~(BIT(23) | PCI_EXP_LNKCAP_CLKPM)),
+	},
+
+	[PCI_EXP_LNKCTL / 4] = {
+		/*
+		 * Link control has bits [15:14], [11:3] and [1:0] RW, the
+		 * rest is reserved. Bit 8 is reserved for non-upstream ports.
+		 *
+		 * Link status has bits [13:0] RO, and bits [15:14]
+		 * W1C.
+		 */
+		.rw = GENMASK(15, 14) | GENMASK(11, 9) | GENMASK(7, 3) | GENMASK(1, 0),
+		.ro = GENMASK(13, 0) << 16,
+		.w1c = GENMASK(15, 14) << 16,
+	},
+
+	[PCI_EXP_SLTCAP / 4] = {
+		.ro = ~0,
+	},
+
+	[PCI_EXP_SLTCTL / 4] = {
+		/*
+		 * Slot control has bits [14:0] RW, the rest is
+		 * reserved.
+		 *
+		 * Slot status has bits 8 and [4:0] W1C, bits [7:5] RO, the
+		 * rest is reserved.
+		 */
+		.rw = GENMASK(14, 0),
+		.w1c = (PCI_EXP_SLTSTA_ABP | PCI_EXP_SLTSTA_PFD |
+			PCI_EXP_SLTSTA_MRLSC | PCI_EXP_SLTSTA_PDC |
+			PCI_EXP_SLTSTA_CC | PCI_EXP_SLTSTA_DLLSC) << 16,
+		.ro = (PCI_EXP_SLTSTA_MRLSS | PCI_EXP_SLTSTA_PDS |
+		       PCI_EXP_SLTSTA_EIS) << 16,
+	},
+
+	[PCI_EXP_RTCTL / 4] = {
+		/*
+		 * Root control has bits [4:0] RW, the rest is
+		 * reserved.
+		 *
+		 * Root capabilities has bit 0 RO, the rest is reserved.
+		 */
+		.rw = (PCI_EXP_RTCTL_SECEE | PCI_EXP_RTCTL_SENFEE |
+		       PCI_EXP_RTCTL_SEFEE | PCI_EXP_RTCTL_PMEIE |
+		       PCI_EXP_RTCTL_CRSSVE),
+		.ro = PCI_EXP_RTCAP_CRSVIS << 16,
+	},
+
+	[PCI_EXP_RTSTA / 4] = {
+		/*
+		 * Root status has bits 17 and [15:0] RO, bit 16 W1C, the rest
+		 * is reserved.
+		 */
+		.ro = GENMASK(15, 0) | PCI_EXP_RTSTA_PENDING,
+		.w1c = PCI_EXP_RTSTA_PME,
+	},
+
+	[PCI_EXP_DEVCAP2 / 4] = {
+		/*
+		 * Device capabilities 2 register has reserved bits [30:27].
+		 * Also bits [26:24] are reserved for non-upstream ports.
+		 */
+		.ro = BIT(31) | GENMASK(23, 0),
+	},
+
+	[PCI_EXP_DEVCTL2 / 4] = {
+		/*
+		 * Device control 2 register is RW. Bit 11 is reserved for
+		 * non-upstream ports.
+		 *
+		 * Device status 2 register is reserved.
+		 */
+		.rw = GENMASK(15, 12) | GENMASK(10, 0),
+	},
+
+	[PCI_EXP_LNKCAP2 / 4] = {
+		/* Link capabilities 2 register has reserved bits [30:25] and 0. */
+		.ro = BIT(31) | GENMASK(24, 1),
+	},
+
+	[PCI_EXP_LNKCTL2 / 4] = {
+		/*
+		 * Link control 2 register is RW.
+		 *
+		 * Link status 2 register has bits 5, 15 W1C;
+		 * bits 10, 11 reserved and others are RO.
+		 */
+		.rw = GENMASK(15, 0),
+		.w1c = (BIT(15) | BIT(5)) << 16,
+		.ro = (GENMASK(14, 12) | GENMASK(9, 6) | GENMASK(4, 0)) << 16,
+	},
+
+	[PCI_EXP_SLTCAP2 / 4] = {
+		/* Slot capabilities 2 register is reserved. */
+	},
+
+	[PCI_EXP_SLTCTL2 / 4] = {
+		/* Both Slot control 2 and Slot status 2 registers are reserved. */
+	},
+};
+
+static pci_bridge_emul_read_status_t
+pci_bridge_emul_read_ssid(struct pci_bridge_emul *bridge, int reg, u32 *value)
+{
+	switch (reg) {
+	case PCI_CAP_LIST_ID:
+		*value = PCI_CAP_ID_SSVID |
+			((bridge->pcie_start > bridge->ssid_start) ? (bridge->pcie_start << 8) : 0);
+		return PCI_BRIDGE_EMUL_HANDLED;
+
+	case PCI_SSVID_VENDOR_ID:
+		*value = bridge->subsystem_vendor_id |
+			(bridge->subsystem_id << 16);
+		return PCI_BRIDGE_EMUL_HANDLED;
+
+	default:
+		return PCI_BRIDGE_EMUL_NOT_HANDLED;
+	}
+}
+
+/*
+ * Initialize a pci_bridge_emul structure to represent a fake PCI
+ * bridge configuration space. The caller needs to have initialized
+ * the PCI configuration space with whatever values make sense
+ * (typically at least vendor, device, revision), the ->ops pointer,
+ * and optionally ->data and ->has_pcie.
+ */
+int pci_bridge_emul_init(struct pci_bridge_emul *bridge,
+			 unsigned int flags)
+{
+	BUILD_BUG_ON(sizeof(bridge->conf) != PCI_BRIDGE_CONF_END);
+
+	/*
+	 * class_revision: Class is high 24 bits and revision is low 8 bit
+	 * of this member, while class for PCI Bridge Normal Decode has the
+	 * 24-bit value: PCI_CLASS_BRIDGE_PCI_NORMAL
+	 */
+	bridge->conf.class_revision |=
+		cpu_to_le32(PCI_CLASS_BRIDGE_PCI_NORMAL << 8);
+	bridge->conf.header_type = PCI_HEADER_TYPE_BRIDGE;
+	bridge->conf.cache_line_size = 0x10;
+	bridge->conf.status = cpu_to_le16(PCI_STATUS_CAP_LIST);
+	bridge->pci_regs_behavior = kmemdup(pci_regs_behavior,
+					    sizeof(pci_regs_behavior),
+					    GFP_KERNEL);
+	if (!bridge->pci_regs_behavior)
+		return -ENOMEM;
+
+	/* If ssid_start and pcie_start were not specified then choose the lowest possible value. */
+	if (!bridge->ssid_start && !bridge->pcie_start) {
+		if (bridge->subsystem_vendor_id)
+			bridge->ssid_start = PCI_BRIDGE_CONF_END;
+		if (bridge->has_pcie)
+			bridge->pcie_start = bridge->ssid_start + PCI_CAP_SSID_SIZEOF;
+	} else if (!bridge->ssid_start && bridge->subsystem_vendor_id) {
+		if (bridge->pcie_start - PCI_BRIDGE_CONF_END >= PCI_CAP_SSID_SIZEOF)
+			bridge->ssid_start = PCI_BRIDGE_CONF_END;
+		else
+			bridge->ssid_start = bridge->pcie_start + PCI_CAP_PCIE_SIZEOF;
+	} else if (!bridge->pcie_start && bridge->has_pcie) {
+		if (bridge->ssid_start - PCI_BRIDGE_CONF_END >= PCI_CAP_PCIE_SIZEOF)
+			bridge->pcie_start = PCI_BRIDGE_CONF_END;
+		else
+			bridge->pcie_start = bridge->ssid_start + PCI_CAP_SSID_SIZEOF;
+	}
+
+	bridge->conf.capabilities_pointer = min(bridge->ssid_start, bridge->pcie_start);
+
+	if (bridge->conf.capabilities_pointer)
+		bridge->conf.status |= cpu_to_le16(PCI_STATUS_CAP_LIST);
+
+	if (bridge->has_pcie) {
+		bridge->pcie_conf.cap_id = PCI_CAP_ID_EXP;
+		bridge->pcie_conf.next = (bridge->ssid_start > bridge->pcie_start) ?
+					 bridge->ssid_start : 0;
+		bridge->pcie_conf.cap |= cpu_to_le16(PCI_EXP_TYPE_ROOT_PORT << 4);
+		bridge->pcie_cap_regs_behavior =
+			kmemdup(pcie_cap_regs_behavior,
+				sizeof(pcie_cap_regs_behavior),
+				GFP_KERNEL);
+		if (!bridge->pcie_cap_regs_behavior) {
+			kfree(bridge->pci_regs_behavior);
+			return -ENOMEM;
+		}
+		/* These bits are applicable only for PCI and reserved on PCIe */
+		bridge->pci_regs_behavior[PCI_CACHE_LINE_SIZE / 4].ro &=
+			~GENMASK(15, 8);
+		bridge->pci_regs_behavior[PCI_COMMAND / 4].ro &=
+			~((PCI_COMMAND_SPECIAL | PCI_COMMAND_INVALIDATE |
+			   PCI_COMMAND_VGA_PALETTE | PCI_COMMAND_WAIT |
+			   PCI_COMMAND_FAST_BACK) |
+			  (PCI_STATUS_66MHZ | PCI_STATUS_FAST_BACK |
+			   PCI_STATUS_DEVSEL_MASK) << 16);
+		bridge->pci_regs_behavior[PCI_PRIMARY_BUS / 4].ro &=
+			~GENMASK(31, 24);
+		bridge->pci_regs_behavior[PCI_IO_BASE / 4].ro &=
+			~((PCI_STATUS_66MHZ | PCI_STATUS_FAST_BACK |
+			   PCI_STATUS_DEVSEL_MASK) << 16);
+		bridge->pci_regs_behavior[PCI_INTERRUPT_LINE / 4].rw &=
+			~((PCI_BRIDGE_CTL_MASTER_ABORT |
+			   BIT(8) | BIT(9) | BIT(11)) << 16);
+		bridge->pci_regs_behavior[PCI_INTERRUPT_LINE / 4].ro &=
+			~((PCI_BRIDGE_CTL_FAST_BACK) << 16);
+		bridge->pci_regs_behavior[PCI_INTERRUPT_LINE / 4].w1c &=
+			~(BIT(10) << 16);
+	}
+
+	if (flags & PCI_BRIDGE_EMUL_NO_PREFMEM_FORWARD) {
+		bridge->pci_regs_behavior[PCI_PREF_MEMORY_BASE / 4].ro = ~0;
+		bridge->pci_regs_behavior[PCI_PREF_MEMORY_BASE / 4].rw = 0;
+	}
+
+	if (flags & PCI_BRIDGE_EMUL_NO_IO_FORWARD) {
+		bridge->pci_regs_behavior[PCI_COMMAND / 4].ro |= PCI_COMMAND_IO;
+		bridge->pci_regs_behavior[PCI_COMMAND / 4].rw &= ~PCI_COMMAND_IO;
+		bridge->pci_regs_behavior[PCI_IO_BASE / 4].ro |= GENMASK(15, 0);
+		bridge->pci_regs_behavior[PCI_IO_BASE / 4].rw &= ~GENMASK(15, 0);
+		bridge->pci_regs_behavior[PCI_IO_BASE_UPPER16 / 4].ro = ~0;
+		bridge->pci_regs_behavior[PCI_IO_BASE_UPPER16 / 4].rw = 0;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(pci_bridge_emul_init);
+
+/*
+ * Cleanup a pci_bridge_emul structure that was previously initialized
+ * using pci_bridge_emul_init().
+ */
+void pci_bridge_emul_cleanup(struct pci_bridge_emul *bridge)
+{
+	if (bridge->has_pcie)
+		kfree(bridge->pcie_cap_regs_behavior);
+	kfree(bridge->pci_regs_behavior);
+}
+EXPORT_SYMBOL_GPL(pci_bridge_emul_cleanup);
+
+/*
+ * Should be called by the PCI controller driver when reading the PCI
+ * configuration space of the fake bridge. It will call back the
+ * ->ops->read_base or ->ops->read_pcie operations.
+ */
+int pci_bridge_emul_conf_read(struct pci_bridge_emul *bridge, int where,
+			      int size, u32 *value)
+{
+	int ret;
+	int reg = where & ~3;
+	pci_bridge_emul_read_status_t (*read_op)(struct pci_bridge_emul *bridge,
+						 int reg, u32 *value);
+	__le32 *cfgspace;
+	const struct pci_bridge_reg_behavior *behavior;
+
+	if (reg < PCI_BRIDGE_CONF_END) {
+		/* Emulated PCI space */
+		read_op = bridge->ops->read_base;
+		cfgspace = (__le32 *) &bridge->conf;
+		behavior = bridge->pci_regs_behavior;
+	} else if (reg >= bridge->ssid_start && reg < bridge->ssid_start + PCI_CAP_SSID_SIZEOF &&
+		   bridge->subsystem_vendor_id) {
+		/* Emulated PCI Bridge Subsystem Vendor ID capability */
+		reg -= bridge->ssid_start;
+		read_op = pci_bridge_emul_read_ssid;
+		cfgspace = NULL;
+		behavior = NULL;
+	} else if (reg >= bridge->pcie_start && reg < bridge->pcie_start + PCI_CAP_PCIE_SIZEOF &&
+		   bridge->has_pcie) {
+		/* Our emulated PCIe capability */
+		reg -= bridge->pcie_start;
+		read_op = bridge->ops->read_pcie;
+		cfgspace = (__le32 *) &bridge->pcie_conf;
+		behavior = bridge->pcie_cap_regs_behavior;
+	} else if (reg >= PCI_CFG_SPACE_SIZE && bridge->has_pcie) {
+		/* PCIe extended capability space */
+		reg -= PCI_CFG_SPACE_SIZE;
+		read_op = bridge->ops->read_ext;
+		cfgspace = NULL;
+		behavior = NULL;
+	} else {
+		/* Not implemented */
+		*value = 0;
+		return PCIBIOS_SUCCESSFUL;
+	}
+
+	if (read_op)
+		ret = read_op(bridge, reg, value);
+	else
+		ret = PCI_BRIDGE_EMUL_NOT_HANDLED;
+
+	if (ret == PCI_BRIDGE_EMUL_NOT_HANDLED) {
+		if (cfgspace)
+			*value = le32_to_cpu(cfgspace[reg / 4]);
+		else
+			*value = 0;
+	}
+
+	/*
+	 * Make sure we never return any reserved bit with a value
+	 * different from 0.
+	 */
+	if (behavior)
+		*value &= behavior[reg / 4].ro | behavior[reg / 4].rw |
+			  behavior[reg / 4].w1c;
+
+	if (size == 1)
+		*value = (*value >> (8 * (where & 3))) & 0xff;
+	else if (size == 2)
+		*value = (*value >> (8 * (where & 3))) & 0xffff;
+	else if (size != 4)
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+EXPORT_SYMBOL_GPL(pci_bridge_emul_conf_read);
+
+/*
+ * Should be called by the PCI controller driver when writing the PCI
+ * configuration space of the fake bridge. It will call back the
+ * ->ops->write_base or ->ops->write_pcie operations.
+ */
+int pci_bridge_emul_conf_write(struct pci_bridge_emul *bridge, int where,
+			       int size, u32 value)
+{
+	int reg = where & ~3;
+	int mask, ret, old, new, shift;
+	void (*write_op)(struct pci_bridge_emul *bridge, int reg,
+			 u32 old, u32 new, u32 mask);
+	__le32 *cfgspace;
+	const struct pci_bridge_reg_behavior *behavior;
+
+	ret = pci_bridge_emul_conf_read(bridge, reg, 4, &old);
+	if (ret != PCIBIOS_SUCCESSFUL)
+		return ret;
+
+	if (reg < PCI_BRIDGE_CONF_END) {
+		/* Emulated PCI space */
+		write_op = bridge->ops->write_base;
+		cfgspace = (__le32 *) &bridge->conf;
+		behavior = bridge->pci_regs_behavior;
+	} else if (reg >= bridge->pcie_start && reg < bridge->pcie_start + PCI_CAP_PCIE_SIZEOF &&
+		   bridge->has_pcie) {
+		/* Our emulated PCIe capability */
+		reg -= bridge->pcie_start;
+		write_op = bridge->ops->write_pcie;
+		cfgspace = (__le32 *) &bridge->pcie_conf;
+		behavior = bridge->pcie_cap_regs_behavior;
+	} else if (reg >= PCI_CFG_SPACE_SIZE && bridge->has_pcie) {
+		/* PCIe extended capability space */
+		reg -= PCI_CFG_SPACE_SIZE;
+		write_op = bridge->ops->write_ext;
+		cfgspace = NULL;
+		behavior = NULL;
+	} else {
+		/* Not implemented */
+		return PCIBIOS_SUCCESSFUL;
+	}
+
+	shift = (where & 0x3) * 8;
+
+	if (size == 4)
+		mask = 0xffffffff;
+	else if (size == 2)
+		mask = 0xffff << shift;
+	else if (size == 1)
+		mask = 0xff << shift;
+	else
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	if (behavior) {
+		/* Keep all bits, except the RW bits */
+		new = old & (~mask | ~behavior[reg / 4].rw);
+
+		/* Update the value of the RW bits */
+		new |= (value << shift) & (behavior[reg / 4].rw & mask);
+
+		/* Clear the W1C bits */
+		new &= ~((value << shift) & (behavior[reg / 4].w1c & mask));
+	} else {
+		new = old & ~mask;
+		new |= (value << shift) & mask;
+	}
+
+	if (cfgspace) {
+		/* Save the new value with the cleared W1C bits into the cfgspace */
+		cfgspace[reg / 4] = cpu_to_le32(new);
+	}
+
+	if (behavior) {
+		/*
+		 * Clear the W1C bits not specified by the write mask, so that the
+		 * write_op() does not clear them.
+		 */
+		new &= ~(behavior[reg / 4].w1c & ~mask);
+
+		/*
+		 * Set the W1C bits specified by the write mask, so that write_op()
+		 * knows about that they are to be cleared.
+		 */
+		new |= (value << shift) & (behavior[reg / 4].w1c & mask);
+	}
+
+	if (write_op)
+		write_op(bridge, reg, old, new, mask);
+
+	return PCIBIOS_SUCCESSFUL;
+}
+EXPORT_SYMBOL_GPL(pci_bridge_emul_conf_write);
-- 
cgit v1.2.3