From: Aurelien Jarno Date: Fri, 30 Sep 2022 07:12:45 +0200 Subject: [12/13] arm64: dts: rockchip: Add PCIEe v3 nodes to ODROID-M1 Origin: https://git.kernel.org/linus/35b28582aa3dfd7b6861b7ebc72798b0ff50ed41 Add nodes to ODROID-M1 to support PCIe v3 on the M2 slot. Signed-off-by: Aurelien Jarno Tested-by: Dan Johansen Link: https://lore.kernel.org/r/20220930051246.391614-13-aurelien@aurel32.net Signed-off-by: Heiko Stuebner --- .../boot/dts/rockchip/rk3568-odroid-m1.dts | 34 +++++++++++++++++++ 1 file changed, 34 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts index bd24ccf94e76..2f685c606bb9 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts @@ -96,6 +96,19 @@ simple-audio-card,codec { }; }; + vcc3v3_pcie: vcc3v3-pcie-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_pcie"; + enable-active-high; + gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc3v3_pcie_en_pin>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <5000>; + vin-supply = <&vcc3v3_sys>; + }; + vcc3v3_sys: vcc3v3-sys-regulator { compatible = "regulator-fixed"; regulator-name = "vcc3v3_sys"; @@ -479,6 +492,18 @@ rgmii_phy0: ethernet-phy@0 { }; }; +&pcie30phy { + status = "okay"; +}; + +&pcie3x2 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_reset_pin>; + reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + &pinctrl { fspi { fspi_dual_io_pins: fspi-dual-io-pins { @@ -503,6 +528,15 @@ led_work_pin: led-work-pin { }; }; + pcie { + pcie_reset_pin: pcie-reset-pin { + rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + vcc3v3_pcie_en_pin: vcc3v3-pcie-en-pin { + rockchip,pins = <4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pmic { pmic_int_l: pmic-int-l { rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; -- 2.35.1