1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/mtd/ingenic,nand.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Ingenic SoCs NAND controller devicetree bindings
maintainers:
- Paul Cercueil <paul@crapouillou.net>
allOf:
- $ref: nand-controller.yaml#
- $ref: /schemas/memory-controllers/ingenic,nemc-peripherals.yaml#
properties:
compatible:
enum:
- ingenic,jz4740-nand
- ingenic,jz4725b-nand
- ingenic,jz4780-nand
reg:
items:
- description: Bank number, offset and size of first attached NAND chip
- description: Bank number, offset and size of second attached NAND chip
- description: Bank number, offset and size of third attached NAND chip
- description: Bank number, offset and size of fourth attached NAND chip
minItems: 1
ecc-engine: true
partitions:
type: object
description:
Node containing description of fixed partitions.
See Documentation/devicetree/bindings/mtd/partition.txt
patternProperties:
"^nand@[a-f0-9]$":
type: object
properties:
rb-gpios:
description: GPIO specifier for the busy pin.
maxItems: 1
wp-gpios:
description: GPIO specifier for the write-protect pin.
maxItems: 1
required:
- compatible
- reg
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/clock/ingenic,jz4780-cgu.h>
memory-controller@13410000 {
compatible = "ingenic,jz4780-nemc";
reg = <0x13410000 0x10000>;
#address-cells = <2>;
#size-cells = <1>;
ranges = <1 0 0x1b000000 0x1000000>,
<2 0 0x1a000000 0x1000000>,
<3 0 0x19000000 0x1000000>,
<4 0 0x18000000 0x1000000>,
<5 0 0x17000000 0x1000000>,
<6 0 0x16000000 0x1000000>;
clocks = <&cgu JZ4780_CLK_NEMC>;
nand-controller@1 {
compatible = "ingenic,jz4780-nand";
reg = <1 0 0x1000000>;
#address-cells = <1>;
#size-cells = <0>;
ecc-engine = <&bch>;
ingenic,nemc-tAS = <10>;
ingenic,nemc-tAH = <5>;
ingenic,nemc-tBP = <10>;
ingenic,nemc-tAW = <15>;
ingenic,nemc-tSTRV = <100>;
pinctrl-names = "default";
pinctrl-0 = <&pins_nemc>;
nand@1 {
reg = <1>;
nand-ecc-step-size = <1024>;
nand-ecc-strength = <24>;
nand-ecc-mode = "hw";
nand-on-flash-bbt;
pinctrl-names = "default";
pinctrl-0 = <&pins_nemc_cs1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <2>;
#size-cells = <2>;
partition@0 {
label = "u-boot-spl";
reg = <0x0 0x0 0x0 0x800000>;
};
partition@800000 {
label = "u-boot";
reg = <0x0 0x800000 0x0 0x200000>;
};
partition@a00000 {
label = "u-boot-env";
reg = <0x0 0xa00000 0x0 0x200000>;
};
partition@c00000 {
label = "boot";
reg = <0x0 0xc00000 0x0 0x4000000>;
};
partition@4c00000 {
label = "system";
reg = <0x0 0x4c00000 0x1 0xfb400000>;
};
};
};
};
};
|
