1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
|
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/pci/snps,dw-pcie.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Synopsys DesignWare PCIe interface
maintainers:
- Jingoo Han <jingoohan1@gmail.com>
- Gustavo Pimentel <gustavo.pimentel@synopsys.com>
description: |
Synopsys DesignWare PCIe host controller
allOf:
- $ref: /schemas/pci/pci-bus.yaml#
properties:
compatible:
anyOf:
- {}
- const: snps,dw-pcie
reg:
description: |
It should contain Data Bus Interface (dbi) and config registers for all
versions.
For designware core version >= 4.80, it may contain ATU address space.
minItems: 2
maxItems: 5
reg-names:
minItems: 2
maxItems: 5
items:
enum: [ dbi, dbi2, config, atu, atu_dma, app, appl, elbi, mgmt, ctrl,
parf, cfg, link, ulreg, smu, mpu, apb, phy ]
num-lanes:
description: |
number of lanes to use (this property should be specified unless
the link is brought already up in firmware)
maximum: 16
reset-gpio:
description: GPIO pin number of PERST# signal
maxItems: 1
deprecated: true
reset-gpios:
description: GPIO controlled connection to PERST# signal
maxItems: 1
interrupts: true
interrupt-names: true
clocks: true
snps,enable-cdm-check:
type: boolean
description: |
This is a boolean property and if present enables
automatic checking of CDM (Configuration Dependent Module) registers
for data corruption. CDM registers include standard PCIe configuration
space registers, Port Logic registers, DMA and iATU (internal Address
Translation Unit) registers.
num-viewport:
$ref: /schemas/types.yaml#/definitions/uint32
maximum: 256
description: |
number of view ports configured in hardware. If a platform
does not specify it, the driver autodetects it.
deprecated: true
additionalProperties: true
required:
- reg
- reg-names
- compatible
examples:
- |
bus {
#address-cells = <1>;
#size-cells = <1>;
pcie@dfc00000 {
device_type = "pci";
compatible = "snps,dw-pcie";
reg = <0xdfc00000 0x0001000>, /* IP registers */
<0xd0000000 0x0002000>; /* Configuration space */
reg-names = "dbi", "config";
#address-cells = <3>;
#size-cells = <2>;
ranges = <0x81000000 0 0x00000000 0xde000000 0 0x00010000>,
<0x82000000 0 0xd0400000 0xd0400000 0 0x0d000000>;
interrupts = <25>, <24>;
#interrupt-cells = <1>;
num-lanes = <1>;
};
};
|
