diff options
Diffstat (limited to 'src/shared/loop-util.c')
| -rw-r--r-- | src/shared/loop-util.c | 1027 |
1 files changed, 1027 insertions, 0 deletions
diff --git a/src/shared/loop-util.c b/src/shared/loop-util.c new file mode 100644 index 0000000..3396cf5 --- /dev/null +++ b/src/shared/loop-util.c @@ -0,0 +1,1027 @@ +/* SPDX-License-Identifier: LGPL-2.1-or-later */ + +#if HAVE_VALGRIND_MEMCHECK_H +#include <valgrind/memcheck.h> +#endif + +#include <errno.h> +#include <fcntl.h> +#include <linux/blkpg.h> +#include <linux/fs.h> +#include <linux/loop.h> +#include <sys/file.h> +#include <sys/ioctl.h> +#include <unistd.h> + +#include "sd-device.h" + +#include "alloc-util.h" +#include "blockdev-util.h" +#include "device-util.h" +#include "devnum-util.h" +#include "env-util.h" +#include "errno-util.h" +#include "fd-util.h" +#include "fileio.h" +#include "loop-util.h" +#include "missing_loop.h" +#include "parse-util.h" +#include "path-util.h" +#include "random-util.h" +#include "stat-util.h" +#include "stdio-util.h" +#include "string-util.h" +#include "tmpfile-util.h" + +static void cleanup_clear_loop_close(int *fd) { + if (*fd < 0) + return; + + (void) ioctl(*fd, LOOP_CLR_FD); + (void) safe_close(*fd); +} + +static int loop_is_bound(int fd) { + struct loop_info64 info; + + assert(fd >= 0); + + if (ioctl(fd, LOOP_GET_STATUS64, &info) < 0) { + if (errno == ENXIO) + return false; /* not bound! */ + + return -errno; + } + + return true; /* bound! */ +} + +static int get_current_uevent_seqnum(uint64_t *ret) { + _cleanup_free_ char *p = NULL; + int r; + + r = read_full_virtual_file("/sys/kernel/uevent_seqnum", &p, NULL); + if (r < 0) + return log_debug_errno(r, "Failed to read current uevent sequence number: %m"); + + r = safe_atou64(strstrip(p), ret); + if (r < 0) + return log_debug_errno(r, "Failed to parse current uevent sequence number: %s", p); + + return 0; +} + +static int open_lock_fd(int primary_fd, int operation) { + _cleanup_close_ int lock_fd = -1; + + assert(primary_fd >= 0); + assert(IN_SET(operation & ~LOCK_NB, LOCK_SH, LOCK_EX)); + + lock_fd = fd_reopen(primary_fd, O_RDONLY|O_CLOEXEC|O_NONBLOCK|O_NOCTTY); + if (lock_fd < 0) + return lock_fd; + + if (flock(lock_fd, operation) < 0) + return -errno; + + return TAKE_FD(lock_fd); +} + +static int loop_configure_verify_direct_io(int fd, const struct loop_config *c) { + assert(fd); + assert(c); + + if (FLAGS_SET(c->info.lo_flags, LO_FLAGS_DIRECT_IO)) { + struct loop_info64 info; + + if (ioctl(fd, LOOP_GET_STATUS64, &info) < 0) + return log_debug_errno(errno, "Failed to issue LOOP_GET_STATUS64: %m"); + +#if HAVE_VALGRIND_MEMCHECK_H + VALGRIND_MAKE_MEM_DEFINED(&info, sizeof(info)); +#endif + + /* On older kernels (<= 5.3) it was necessary to set the block size of the loopback block + * device to the logical block size of the underlying file system. Since there was no nice + * way to query the value, we are not bothering to do this however. On newer kernels the + * block size is propagated automatically and does not require intervention from us. We'll + * check here if enabling direct IO worked, to make this easily debuggable however. + * + * (Should anyone really care and actually wants direct IO on old kernels: it might be worth + * enabling direct IO with iteratively larger block sizes until it eventually works.) + * + * On older kernels (e.g.: 5.10) when this is attempted on a file stored on a dm-crypt + * backed partition the kernel will start returning I/O errors when accessing the mounted + * loop device, so return a recognizable error that causes the operation to be started + * from scratch without the LO_FLAGS_DIRECT_IO flag. */ + if (!FLAGS_SET(info.lo_flags, LO_FLAGS_DIRECT_IO)) + return log_debug_errno( + SYNTHETIC_ERRNO(ENOANO), + "Could not enable direct IO mode, retrying in buffered IO mode."); + } + + return 0; +} + +static int loop_configure_verify(int fd, const struct loop_config *c) { + bool broken = false; + int r; + + assert(fd >= 0); + assert(c); + + if (c->block_size != 0) { + int z; + + if (ioctl(fd, BLKSSZGET, &z) < 0) + return -errno; + + assert(z >= 0); + if ((uint32_t) z != c->block_size) + log_debug("LOOP_CONFIGURE didn't honour requested block size %u, got %i instead. Ignoring.", c->block_size, z); + } + + if (c->info.lo_sizelimit != 0) { + /* Kernel 5.8 vanilla doesn't properly propagate the size limit into the + * block device. If it's used, let's immediately check if it had the desired + * effect hence. And if not use classic LOOP_SET_STATUS64. */ + uint64_t z; + + if (ioctl(fd, BLKGETSIZE64, &z) < 0) + return -errno; + + if (z != c->info.lo_sizelimit) { + log_debug("LOOP_CONFIGURE is broken, doesn't honour .info.lo_sizelimit. Falling back to LOOP_SET_STATUS64."); + broken = true; + } + } + + if (FLAGS_SET(c->info.lo_flags, LO_FLAGS_PARTSCAN)) { + /* Kernel 5.8 vanilla doesn't properly propagate the partition scanning flag + * into the block device. Let's hence verify if things work correctly here + * before returning. */ + + r = blockdev_partscan_enabled(fd); + if (r < 0) + return r; + if (r == 0) { + log_debug("LOOP_CONFIGURE is broken, doesn't honour LO_FLAGS_PARTSCAN. Falling back to LOOP_SET_STATUS64."); + broken = true; + } + } + + r = loop_configure_verify_direct_io(fd, c); + if (r < 0) + return r; + + return !broken; +} + +static int loop_configure_fallback(int fd, const struct loop_config *c) { + struct loop_info64 info_copy; + + assert(fd >= 0); + assert(c); + + /* Only some of the flags LOOP_CONFIGURE can set are also settable via LOOP_SET_STATUS64, hence mask + * them out. */ + info_copy = c->info; + info_copy.lo_flags &= LOOP_SET_STATUS_SETTABLE_FLAGS; + + /* Since kernel commit 5db470e229e22b7eda6e23b5566e532c96fb5bc3 (kernel v5.0) the LOOP_SET_STATUS64 + * ioctl can return EAGAIN in case we change the info.lo_offset field, if someone else is accessing the + * block device while we try to reconfigure it. This is a pretty common case, since udev might + * instantly start probing the device as soon as we attach an fd to it. Hence handle it in two ways: + * first, let's take the BSD lock to ensure that udev will not step in between the point in + * time where we attach the fd and where we reconfigure the device. Secondly, let's wait 50ms on + * EAGAIN and retry. The former should be an efficient mechanism to avoid we have to wait 50ms + * needlessly if we are just racing against udev. The latter is protection against all other cases, + * i.e. peers that do not take the BSD lock. */ + + for (unsigned n_attempts = 0;;) { + if (ioctl(fd, LOOP_SET_STATUS64, &info_copy) >= 0) + break; + + if (errno != EAGAIN || ++n_attempts >= 64) + return log_debug_errno(errno, "Failed to configure loopback block device: %m"); + + /* Sleep some random time, but at least 10ms, at most 250ms. Increase the delay the more + * failed attempts we see */ + (void) usleep(UINT64_C(10) * USEC_PER_MSEC + + random_u64_range(UINT64_C(240) * USEC_PER_MSEC * n_attempts/64)); + } + + /* Work around a kernel bug, where changing offset/size of the loopback device doesn't correctly + * invalidate the buffer cache. For details see: + * + * https://android.googlesource.com/platform/system/apex/+/bef74542fbbb4cd629793f4efee8e0053b360570 + * + * This was fixed in kernel 5.0, see: + * + * https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=5db470e229e22b7eda6e23b5566e532c96fb5bc3 + * + * We'll run the work-around here in the legacy LOOP_SET_STATUS64 codepath. In the LOOP_CONFIGURE + * codepath above it should not be necessary. */ + if (c->info.lo_offset != 0 || c->info.lo_sizelimit != 0) + if (ioctl(fd, BLKFLSBUF, 0) < 0) + log_debug_errno(errno, "Failed to issue BLKFLSBUF ioctl, ignoring: %m"); + + /* LO_FLAGS_DIRECT_IO is a flags we need to configure via explicit ioctls. */ + if (FLAGS_SET(c->info.lo_flags, LO_FLAGS_DIRECT_IO)) + if (ioctl(fd, LOOP_SET_DIRECT_IO, 1UL) < 0) + log_debug_errno(errno, "Failed to enable direct IO mode, ignoring: %m"); + + return loop_configure_verify_direct_io(fd, c); +} + +static int loop_configure( + int nr, + int open_flags, + int lock_op, + const struct loop_config *c, + LoopDevice **ret) { + + static bool loop_configure_broken = false; + + _cleanup_(sd_device_unrefp) sd_device *dev = NULL; + _cleanup_(cleanup_clear_loop_close) int loop_with_fd = -1; /* This must be declared before lock_fd. */ + _cleanup_close_ int fd = -1, lock_fd = -1; + _cleanup_free_ char *node = NULL; + uint64_t diskseq = 0, seqnum = UINT64_MAX; + usec_t timestamp = USEC_INFINITY; + dev_t devno; + int r; + + assert(nr >= 0); + assert(c); + assert(ret); + + if (asprintf(&node, "/dev/loop%i", nr) < 0) + return -ENOMEM; + + r = sd_device_new_from_devname(&dev, node); + if (r < 0) + return r; + + r = sd_device_get_devnum(dev, &devno); + if (r < 0) + return r; + + fd = sd_device_open(dev, O_CLOEXEC|O_NONBLOCK|O_NOCTTY|open_flags); + if (fd < 0) + return fd; + + /* Let's lock the device before we do anything. We take the BSD lock on a second, separately opened + * fd for the device. udev after all watches for close() events (specifically IN_CLOSE_WRITE) on + * block devices to reprobe them, hence by having a separate fd we will later close() we can ensure + * we trigger udev after everything is done. If we'd lock our own fd instead and keep it open for a + * long time udev would possibly never run on it again, even though the fd is unlocked, simply + * because we never close() it. It also has the nice benefit we can use the _cleanup_close_ logic to + * automatically release the lock, after we are done. */ + lock_fd = open_lock_fd(fd, LOCK_EX); + if (lock_fd < 0) + return lock_fd; + + /* Let's see if backing file is really unattached. Someone may already attach a backing file without + * taking BSD lock. */ + r = loop_is_bound(fd); + if (r < 0) + return r; + if (r > 0) + return -EBUSY; + + /* Let's see if the device is really detached, i.e. currently has no associated partition block + * devices. On various kernels (such as 5.8) it is possible to have a loopback block device that + * superficially is detached but still has partition block devices associated for it. Let's then + * manually remove the partitions via BLKPG, and tell the caller we did that via EUCLEAN, so they try + * again. */ + r = block_device_remove_all_partitions(dev, fd); + if (r < 0) + return r; + if (r > 0) + /* Removed all partitions. Let's report this to the caller, to try again, and count this as + * an attempt. */ + return -EUCLEAN; + + if (!loop_configure_broken) { + /* Acquire uevent seqnum immediately before attaching the loopback device. This allows + * callers to ignore all uevents with a seqnum before this one, if they need to associate + * uevent with this attachment. Doing so isn't race-free though, as uevents that happen in + * the window between this reading of the seqnum, and the LOOP_CONFIGURE call might still be + * mistaken as originating from our attachment, even though might be caused by an earlier + * use. But doing this at least shortens the race window a bit. */ + r = get_current_uevent_seqnum(&seqnum); + if (r < 0) + return r; + + timestamp = now(CLOCK_MONOTONIC); + + if (ioctl(fd, LOOP_CONFIGURE, c) < 0) { + /* Do fallback only if LOOP_CONFIGURE is not supported, propagate all other + * errors. Note that the kernel is weird: non-existing ioctls currently return EINVAL + * rather than ENOTTY on loopback block devices. They should fix that in the kernel, + * but in the meantime we accept both here. */ + if (!ERRNO_IS_NOT_SUPPORTED(errno) && errno != EINVAL) + return -errno; + + loop_configure_broken = true; + } else { + loop_with_fd = TAKE_FD(fd); + + r = loop_configure_verify(loop_with_fd, c); + if (r < 0) + return r; + if (r == 0) { + /* LOOP_CONFIGURE doesn't work. Remember that. */ + loop_configure_broken = true; + + /* We return EBUSY here instead of retrying immediately with LOOP_SET_FD, + * because LOOP_CLR_FD is async: if the operation cannot be executed right + * away it just sets the autoclear flag on the device. This means there's a + * good chance we cannot actually reuse the loopback device right-away. Hence + * let's assume it's busy, avoid the trouble and let the calling loop call us + * again with a new, likely unused device. */ + return -EBUSY; + } + } + } + + if (loop_configure_broken) { + /* Let's read the seqnum again, to shorten the window. */ + r = get_current_uevent_seqnum(&seqnum); + if (r < 0) + return r; + + timestamp = now(CLOCK_MONOTONIC); + + if (ioctl(fd, LOOP_SET_FD, c->fd) < 0) + return -errno; + + loop_with_fd = TAKE_FD(fd); + + r = loop_configure_fallback(loop_with_fd, c); + if (r < 0) + return r; + } + + r = fd_get_diskseq(loop_with_fd, &diskseq); + if (r < 0 && r != -EOPNOTSUPP) + return r; + + switch (lock_op & ~LOCK_NB) { + case LOCK_EX: /* Already in effect */ + break; + case LOCK_SH: /* Downgrade */ + if (flock(lock_fd, lock_op) < 0) + return -errno; + break; + case LOCK_UN: /* Release */ + lock_fd = safe_close(lock_fd); + break; + default: + assert_not_reached(); + } + + LoopDevice *d = new(LoopDevice, 1); + if (!d) + return -ENOMEM; + + *d = (LoopDevice) { + .n_ref = 1, + .fd = TAKE_FD(loop_with_fd), + .lock_fd = TAKE_FD(lock_fd), + .node = TAKE_PTR(node), + .nr = nr, + .devno = devno, + .dev = TAKE_PTR(dev), + .diskseq = diskseq, + .uevent_seqnum_not_before = seqnum, + .timestamp_not_before = timestamp, + }; + + *ret = TAKE_PTR(d); + return 0; +} + +static int loop_device_make_internal( + const char *path, + int fd, + int open_flags, + uint64_t offset, + uint64_t size, + uint32_t block_size, + uint32_t loop_flags, + int lock_op, + LoopDevice **ret) { + + _cleanup_(loop_device_unrefp) LoopDevice *d = NULL; + _cleanup_close_ int reopened_fd = -1, control = -1; + _cleanup_free_ char *backing_file = NULL; + struct loop_config config; + int r, f_flags; + struct stat st; + + assert(fd >= 0); + assert(ret); + assert(IN_SET(open_flags, O_RDWR, O_RDONLY)); + + if (fstat(fd, &st) < 0) + return -errno; + + if (S_ISBLK(st.st_mode)) { + if (offset == 0 && IN_SET(size, 0, UINT64_MAX)) + /* If this is already a block device and we are supposed to cover the whole of it + * then store an fd to the original open device node — and do not actually create an + * unnecessary loopback device for it. */ + return loop_device_open_from_fd(fd, open_flags, lock_op, ret); + } else { + r = stat_verify_regular(&st); + if (r < 0) + return r; + } + + if (path) { + r = path_make_absolute_cwd(path, &backing_file); + if (r < 0) + return r; + + path_simplify(backing_file); + } else { + r = fd_get_path(fd, &backing_file); + if (r < 0) + return r; + } + + f_flags = fcntl(fd, F_GETFL); + if (f_flags < 0) + return -errno; + + if (FLAGS_SET(loop_flags, LO_FLAGS_DIRECT_IO) != FLAGS_SET(f_flags, O_DIRECT)) { + /* If LO_FLAGS_DIRECT_IO is requested, then make sure we have the fd open with O_DIRECT, as + * that's required. Conversely, if it's off require that O_DIRECT is off too (that's because + * new kernels will implicitly enable LO_FLAGS_DIRECT_IO if O_DIRECT is set). + * + * Our intention here is that LO_FLAGS_DIRECT_IO is the primary knob, and O_DIRECT derived + * from that automatically. */ + + reopened_fd = fd_reopen(fd, (FLAGS_SET(loop_flags, LO_FLAGS_DIRECT_IO) ? O_DIRECT : 0)|O_CLOEXEC|O_NONBLOCK|open_flags); + if (reopened_fd < 0) { + if (!FLAGS_SET(loop_flags, LO_FLAGS_DIRECT_IO)) + return log_debug_errno(reopened_fd, "Failed to reopen file descriptor without O_DIRECT: %m"); + + /* Some file systems might not support O_DIRECT, let's gracefully continue without it then. */ + log_debug_errno(reopened_fd, "Failed to enable O_DIRECT for backing file descriptor for loopback device. Continuing without."); + loop_flags &= ~LO_FLAGS_DIRECT_IO; + } else + fd = reopened_fd; /* From now on, operate on our new O_DIRECT fd */ + } + + control = open("/dev/loop-control", O_RDWR|O_CLOEXEC|O_NOCTTY|O_NONBLOCK); + if (control < 0) + return -errno; + + config = (struct loop_config) { + .fd = fd, + .block_size = block_size, + .info = { + /* Use the specified flags, but configure the read-only flag from the open flags, and force autoclear */ + .lo_flags = (loop_flags & ~LO_FLAGS_READ_ONLY) | ((open_flags & O_ACCMODE) == O_RDONLY ? LO_FLAGS_READ_ONLY : 0) | LO_FLAGS_AUTOCLEAR, + .lo_offset = offset, + .lo_sizelimit = size == UINT64_MAX ? 0 : size, + }, + }; + + /* Loop around LOOP_CTL_GET_FREE, since at the moment we attempt to open the returned device it might + * be gone already, taken by somebody else racing against us. */ + for (unsigned n_attempts = 0;;) { + int nr; + + /* Let's take a lock on the control device first. On a busy system, where many programs + * attempt to allocate a loopback device at the same time, we might otherwise keep looping + * around relatively heavy operations: asking for a free loopback device, then opening it, + * validating it, attaching something to it. Let's serialize this whole operation, to make + * unnecessary busywork less likely. Note that this is just something we do to optimize our + * own code (and whoever else decides to use LOCK_EX locks for this), taking this lock is not + * necessary, it just means it's less likely we have to iterate through this loop again and + * again if our own code races against our own code. + * + * Note: our lock protocol is to take the /dev/loop-control lock first, and the block device + * lock second, if both are taken, and always in this order, to avoid ABBA locking issues. */ + if (flock(control, LOCK_EX) < 0) + return -errno; + + nr = ioctl(control, LOOP_CTL_GET_FREE); + if (nr < 0) + return -errno; + + r = loop_configure(nr, open_flags, lock_op, &config, &d); + if (r >= 0) + break; + + /* -ENODEV or friends: Somebody might've gotten the same number from the kernel, used the + * device, and called LOOP_CTL_REMOVE on it. Let's retry with a new number. + * -EBUSY: a file descriptor is already bound to the loopback block device. + * -EUCLEAN: some left-over partition devices that were cleaned up. + * -ENOANO: we tried to use LO_FLAGS_DIRECT_IO but the kernel rejected it. */ + if (!ERRNO_IS_DEVICE_ABSENT(r) && !IN_SET(r, -EBUSY, -EUCLEAN, -ENOANO)) + return r; + + /* OK, this didn't work, let's try again a bit later, but first release the lock on the + * control device */ + if (flock(control, LOCK_UN) < 0) + return -errno; + + if (++n_attempts >= 64) /* Give up eventually */ + return -EBUSY; + + /* If we failed to enable direct IO mode, let's retry without it. We restart the process as + * on some combination of kernel version and storage filesystem, the kernel is very unhappy + * about a failed DIRECT_IO enablement and throws I/O errors. */ + if (r == -ENOANO && FLAGS_SET(config.info.lo_flags, LO_FLAGS_DIRECT_IO)) { + config.info.lo_flags &= ~LO_FLAGS_DIRECT_IO; + open_flags &= ~O_DIRECT; + + int non_direct_io_fd = fd_reopen(config.fd, O_CLOEXEC|O_NONBLOCK|open_flags); + if (non_direct_io_fd < 0) + return log_debug_errno( + non_direct_io_fd, + "Failed to reopen file descriptor without O_DIRECT: %m"); + + safe_close(reopened_fd); + fd = config.fd = /* For cleanups */ reopened_fd = non_direct_io_fd; + } + + /* Wait some random time, to make collision less likely. Let's pick a random time in the + * range 0ms…250ms, linearly scaled by the number of failed attempts. */ + (void) usleep(random_u64_range(UINT64_C(10) * USEC_PER_MSEC + + UINT64_C(240) * USEC_PER_MSEC * n_attempts/64)); + } + + d->backing_file = TAKE_PTR(backing_file); + + log_debug("Successfully acquired %s, devno=%u:%u, nr=%i, diskseq=%" PRIu64, + d->node, + major(d->devno), minor(d->devno), + d->nr, + d->diskseq); + + *ret = TAKE_PTR(d); + return 0; +} + +static uint32_t loop_flags_mangle(uint32_t loop_flags) { + int r; + + r = getenv_bool("SYSTEMD_LOOP_DIRECT_IO"); + if (r < 0 && r != -ENXIO) + log_debug_errno(r, "Failed to parse $SYSTEMD_LOOP_DIRECT_IO, ignoring: %m"); + + return UPDATE_FLAG(loop_flags, LO_FLAGS_DIRECT_IO, r != 0); /* Turn on LO_FLAGS_DIRECT_IO by default, unless explicitly configured to off. */ +} + +int loop_device_make( + int fd, + int open_flags, + uint64_t offset, + uint64_t size, + uint32_t block_size, + uint32_t loop_flags, + int lock_op, + LoopDevice **ret) { + + assert(fd >= 0); + assert(ret); + + return loop_device_make_internal( + NULL, + fd, + open_flags, + offset, + size, + block_size, + loop_flags_mangle(loop_flags), + lock_op, + ret); +} + +int loop_device_make_by_path( + const char *path, + int open_flags, + uint32_t loop_flags, + int lock_op, + LoopDevice **ret) { + + int r, basic_flags, direct_flags, rdwr_flags; + _cleanup_close_ int fd = -1; + bool direct = false; + + assert(path); + assert(ret); + assert(open_flags < 0 || IN_SET(open_flags, O_RDWR, O_RDONLY)); + + /* Passing < 0 as open_flags here means we'll try to open the device writable if we can, retrying + * read-only if we cannot. */ + + loop_flags = loop_flags_mangle(loop_flags); + + /* Let's open with O_DIRECT if we can. But not all file systems support that, hence fall back to + * non-O_DIRECT mode automatically, if it fails. */ + + basic_flags = O_CLOEXEC|O_NONBLOCK|O_NOCTTY; + direct_flags = FLAGS_SET(loop_flags, LO_FLAGS_DIRECT_IO) ? O_DIRECT : 0; + rdwr_flags = open_flags >= 0 ? open_flags : O_RDWR; + + fd = open(path, basic_flags|direct_flags|rdwr_flags); + if (fd < 0 && direct_flags != 0) /* If we had O_DIRECT on, and things failed with that, let's immediately try again without */ + fd = open(path, basic_flags|rdwr_flags); + else + direct = direct_flags != 0; + if (fd < 0) { + r = -errno; + + /* Retry read-only? */ + if (open_flags >= 0 || !(ERRNO_IS_PRIVILEGE(r) || r == -EROFS)) + return r; + + fd = open(path, basic_flags|direct_flags|O_RDONLY); + if (fd < 0 && direct_flags != 0) /* as above */ + fd = open(path, basic_flags|O_RDONLY); + else + direct = direct_flags != 0; + if (fd < 0) + return r; /* Propagate original error */ + + open_flags = O_RDONLY; + } else if (open_flags < 0) + open_flags = O_RDWR; + + log_debug("Opened '%s' in %s access mode%s, with O_DIRECT %s%s.", + path, + open_flags == O_RDWR ? "O_RDWR" : "O_RDONLY", + open_flags != rdwr_flags ? " (O_RDWR was requested but not allowed)" : "", + direct ? "enabled" : "disabled", + direct != (direct_flags != 0) ? " (O_DIRECT was requested but not supported)" : ""); + + return loop_device_make_internal(path, fd, open_flags, 0, 0, 0, loop_flags, lock_op, ret); +} + +static LoopDevice* loop_device_free(LoopDevice *d) { + _cleanup_close_ int control = -1; + int r; + + if (!d) + return NULL; + + /* Release any lock we might have on the device first. We want to open+lock the /dev/loop-control + * device below, but our lock protocol says that if both control and block device locks are taken, + * the control lock needs to be taken first, the block device lock second — in order to avoid ABBA + * locking issues. Moreover, we want to issue LOOP_CLR_FD on the block device further down, and that + * would fail if we had another fd open to the device. */ + d->lock_fd = safe_close(d->lock_fd); + + /* Let's open the control device early, and lock it, so that we can release our block device and + * delete it in a synchronized fashion, and allocators won't needlessly see the block device as free + * while we are about to delete it. */ + if (!LOOP_DEVICE_IS_FOREIGN(d) && !d->relinquished) { + control = open("/dev/loop-control", O_RDWR|O_CLOEXEC|O_NOCTTY|O_NONBLOCK); + if (control < 0) + log_debug_errno(errno, "Failed to open loop control device, cannot remove loop device '%s', ignoring: %m", strna(d->node)); + else if (flock(control, LOCK_EX) < 0) + log_debug_errno(errno, "Failed to lock loop control device, ignoring: %m"); + } + + /* Then let's release the loopback block device */ + if (d->fd >= 0) { + /* Implicitly sync the device, since otherwise in-flight blocks might not get written */ + if (fsync(d->fd) < 0) + log_debug_errno(errno, "Failed to sync loop block device, ignoring: %m"); + + if (!LOOP_DEVICE_IS_FOREIGN(d) && !d->relinquished) { + /* We are supposed to clear the loopback device. Let's do this synchronously: lock + * the device, manually remove all partitions and then clear it. This should ensure + * udev doesn't concurrently access the devices, and we can be reasonably sure that + * once we are done here the device is cleared and all its partition children + * removed. Note that we lock our primary device fd here (and not a separate locking + * fd, as we do during allocation, since we want to keep the lock all the way through + * the LOOP_CLR_FD, but that call would fail if we had more than one fd open.) */ + + if (flock(d->fd, LOCK_EX) < 0) + log_debug_errno(errno, "Failed to lock loop block device, ignoring: %m"); + + r = block_device_remove_all_partitions(d->dev, d->fd); + if (r < 0) + log_debug_errno(r, "Failed to remove partitions of loopback block device, ignoring: %m"); + + if (ioctl(d->fd, LOOP_CLR_FD) < 0) + log_debug_errno(errno, "Failed to clear loop device, ignoring: %m"); + } + + safe_close(d->fd); + } + + /* Now that the block device is released, let's also try to remove it */ + if (control >= 0) { + useconds_t delay = 5 * USEC_PER_MSEC; + + for (unsigned attempt = 1;; attempt++) { + if (ioctl(control, LOOP_CTL_REMOVE, d->nr) >= 0) + break; + if (errno != EBUSY || attempt > 38) { + log_debug_errno(errno, "Failed to remove device %s: %m", strna(d->node)); + break; + } + if (attempt % 5 == 0) { + log_debug("Device is still busy after %u attempts…", attempt); + delay *= 2; + } + + (void) usleep(delay); + } + } + + free(d->node); + sd_device_unref(d->dev); + free(d->backing_file); + return mfree(d); +} + +DEFINE_TRIVIAL_REF_UNREF_FUNC(LoopDevice, loop_device, loop_device_free); + +void loop_device_relinquish(LoopDevice *d) { + assert(d); + + /* Don't attempt to clean up the loop device anymore from this point on. Leave the clean-ing up to the kernel + * itself, using the loop device "auto-clear" logic we already turned on when creating the device. */ + + d->relinquished = true; +} + +void loop_device_unrelinquish(LoopDevice *d) { + assert(d); + d->relinquished = false; +} + +int loop_device_open( + sd_device *dev, + int open_flags, + int lock_op, + LoopDevice **ret) { + + _cleanup_close_ int fd = -1, lock_fd = -1; + _cleanup_free_ char *node = NULL, *backing_file = NULL; + struct loop_info64 info; + uint64_t diskseq = 0; + LoopDevice *d; + const char *s; + dev_t devnum; + int r, nr = -1; + + assert(dev); + assert(IN_SET(open_flags, O_RDWR, O_RDONLY)); + assert(ret); + + /* Even if fd is provided through the argument in loop_device_open_from_fd(), we reopen the inode + * here, instead of keeping just a dup() clone of it around, since we want to ensure that the + * O_DIRECT flag of the handle we keep is off, we have our own file index, and have the right + * read/write mode in effect. */ + fd = sd_device_open(dev, O_CLOEXEC|O_NONBLOCK|O_NOCTTY|open_flags); + if (fd < 0) + return fd; + + if ((lock_op & ~LOCK_NB) != LOCK_UN) { + lock_fd = open_lock_fd(fd, lock_op); + if (lock_fd < 0) + return lock_fd; + } + + if (ioctl(fd, LOOP_GET_STATUS64, &info) >= 0) { +#if HAVE_VALGRIND_MEMCHECK_H + /* Valgrind currently doesn't know LOOP_GET_STATUS64. Remove this once it does */ + VALGRIND_MAKE_MEM_DEFINED(&info, sizeof(info)); +#endif + nr = info.lo_number; + + if (sd_device_get_sysattr_value(dev, "loop/backing_file", &s) >= 0) { + backing_file = strdup(s); + if (!backing_file) + return -ENOMEM; + } + } + + r = fd_get_diskseq(fd, &diskseq); + if (r < 0 && r != -EOPNOTSUPP) + return r; + + r = sd_device_get_devnum(dev, &devnum); + if (r < 0) + return r; + + r = sd_device_get_devname(dev, &s); + if (r < 0) + return r; + + node = strdup(s); + if (!node) + return -ENOMEM; + + d = new(LoopDevice, 1); + if (!d) + return -ENOMEM; + + *d = (LoopDevice) { + .n_ref = 1, + .fd = TAKE_FD(fd), + .lock_fd = TAKE_FD(lock_fd), + .nr = nr, + .node = TAKE_PTR(node), + .dev = sd_device_ref(dev), + .backing_file = TAKE_PTR(backing_file), + .relinquished = true, /* It's not ours, don't try to destroy it when this object is freed */ + .devno = devnum, + .diskseq = diskseq, + .uevent_seqnum_not_before = UINT64_MAX, + .timestamp_not_before = USEC_INFINITY, + }; + + *ret = d; + return 0; +} + +int loop_device_open_from_fd( + int fd, + int open_flags, + int lock_op, + LoopDevice **ret) { + + _cleanup_(sd_device_unrefp) sd_device *dev = NULL; + int r; + + assert(fd >= 0); + + r = block_device_new_from_fd(fd, 0, &dev); + if (r < 0) + return r; + + return loop_device_open(dev, open_flags, lock_op, ret); +} + +int loop_device_open_from_path( + const char *path, + int open_flags, + int lock_op, + LoopDevice **ret) { + + _cleanup_(sd_device_unrefp) sd_device *dev = NULL; + int r; + + assert(path); + + r = block_device_new_from_path(path, 0, &dev); + if (r < 0) + return r; + + return loop_device_open(dev, open_flags, lock_op, ret); +} + +static int resize_partition(int partition_fd, uint64_t offset, uint64_t size) { + char sysfs[STRLEN("/sys/dev/block/:/partition") + 2*DECIMAL_STR_MAX(dev_t) + 1]; + _cleanup_free_ char *buffer = NULL; + uint64_t current_offset, current_size, partno; + _cleanup_close_ int whole_fd = -1; + struct stat st; + dev_t devno; + int r; + + assert(partition_fd >= 0); + + /* Resizes the partition the loopback device refer to (assuming it refers to one instead of an actual + * loopback device), and changes the offset, if needed. This is a fancy wrapper around + * BLKPG_RESIZE_PARTITION. */ + + if (fstat(partition_fd, &st) < 0) + return -errno; + + assert(S_ISBLK(st.st_mode)); + + xsprintf(sysfs, "/sys/dev/block/" DEVNUM_FORMAT_STR "/partition", DEVNUM_FORMAT_VAL(st.st_rdev)); + r = read_one_line_file(sysfs, &buffer); + if (r == -ENOENT) /* not a partition, cannot resize */ + return -ENOTTY; + if (r < 0) + return r; + r = safe_atou64(buffer, &partno); + if (r < 0) + return r; + + xsprintf(sysfs, "/sys/dev/block/" DEVNUM_FORMAT_STR "/start", DEVNUM_FORMAT_VAL(st.st_rdev)); + + buffer = mfree(buffer); + r = read_one_line_file(sysfs, &buffer); + if (r < 0) + return r; + r = safe_atou64(buffer, ¤t_offset); + if (r < 0) + return r; + if (current_offset > UINT64_MAX/512U) + return -EINVAL; + current_offset *= 512U; + + if (ioctl(partition_fd, BLKGETSIZE64, ¤t_size) < 0) + return -EINVAL; + + if (size == UINT64_MAX && offset == UINT64_MAX) + return 0; + if (current_size == size && current_offset == offset) + return 0; + + xsprintf(sysfs, "/sys/dev/block/" DEVNUM_FORMAT_STR "/../dev", DEVNUM_FORMAT_VAL(st.st_rdev)); + + buffer = mfree(buffer); + r = read_one_line_file(sysfs, &buffer); + if (r < 0) + return r; + r = parse_devnum(buffer, &devno); + if (r < 0) + return r; + + whole_fd = r = device_open_from_devnum(S_IFBLK, devno, O_RDWR|O_CLOEXEC|O_NONBLOCK|O_NOCTTY, NULL); + if (r < 0) + return r; + + return block_device_resize_partition( + whole_fd, + partno, + offset == UINT64_MAX ? current_offset : offset, + size == UINT64_MAX ? current_size : size); +} + +int loop_device_refresh_size(LoopDevice *d, uint64_t offset, uint64_t size) { + struct loop_info64 info; + + assert(d); + assert(d->fd >= 0); + + /* Changes the offset/start of the loop device relative to the beginning of the underlying file or + * block device. If this loop device actually refers to a partition and not a loopback device, we'll + * try to adjust the partition offsets instead. + * + * If either offset or size is UINT64_MAX we won't change that parameter. */ + + if (d->nr < 0) /* not a loopback device */ + return resize_partition(d->fd, offset, size); + + if (ioctl(d->fd, LOOP_GET_STATUS64, &info) < 0) + return -errno; + +#if HAVE_VALGRIND_MEMCHECK_H + /* Valgrind currently doesn't know LOOP_GET_STATUS64. Remove this once it does */ + VALGRIND_MAKE_MEM_DEFINED(&info, sizeof(info)); +#endif + + if (size == UINT64_MAX && offset == UINT64_MAX) + return 0; + if (info.lo_sizelimit == size && info.lo_offset == offset) + return 0; + + if (size != UINT64_MAX) + info.lo_sizelimit = size; + if (offset != UINT64_MAX) + info.lo_offset = offset; + + return RET_NERRNO(ioctl(d->fd, LOOP_SET_STATUS64, &info)); +} + +int loop_device_flock(LoopDevice *d, int operation) { + assert(IN_SET(operation & ~LOCK_NB, LOCK_UN, LOCK_SH, LOCK_EX)); + assert(d); + + /* When unlocking just close the lock fd */ + if ((operation & ~LOCK_NB) == LOCK_UN) { + d->lock_fd = safe_close(d->lock_fd); + return 0; + } + + /* If we had no lock fd so far, create one and lock it right-away */ + if (d->lock_fd < 0) { + assert(d->fd >= 0); + + d->lock_fd = open_lock_fd(d->fd, operation); + if (d->lock_fd < 0) + return d->lock_fd; + + return 0; + } + + /* Otherwise change the current lock mode on the existing fd */ + return RET_NERRNO(flock(d->lock_fd, operation)); +} + +int loop_device_sync(LoopDevice *d) { + assert(d); + assert(d->fd >= 0); + + /* We also do this implicitly in loop_device_unref(). Doing this explicitly here has the benefit that + * we can check the return value though. */ + + return RET_NERRNO(fsync(d->fd)); +} |