systemd homectl 1 homectl Create, remove, change or inspect home directories homectl OPTIONS COMMAND NAME homectl may be used to create, remove, change or inspect a user's home directory. It's primarily a command interfacing with systemd-homed.service8 which manages home directories of users. Home directories managed by systemd-homed.service are self-contained, and thus include the user's full metadata record in the home's data storage itself, making them easy to migrate between machines. In particular, a home directory describes a matching user record, and every user record managed by systemd-homed.service also implies existence and encapsulation of a home directory. The user account and home directory become the same concept. The following backing storage mechanisms are supported: An individual LUKS2 encrypted loopback file for a user, stored in /home/*.home. At login the file system contained in this files is mounted, after the LUKS2 encrypted volume has been attached. The user's password is identical to the encryption passphrase of the LUKS2 volume. Access to data without preceding user authentication is thus not possible, even for the system administrator. This storage mechanism provides the strongest data security and is thus recommended. Similar, but the LUKS2 encrypted file system is located on regular block device, such as an USB storage stick. In this mode home directories and all data they include are nicely migratable between machines, simply by plugging the USB stick into different systems at different times. An encrypted directory using fscrypt on file systems that support it (at the moment this is primarily ext4), located in /home/*.homedir. This mechanism also provides encryption, but substantially weaker than LUKS2, as most file system metadata is unprotected. Moreover it currently does not support changing user passwords once the home directory has been created. A btrfs subvolume for each user, also located in /home/*.homedir. This provides no encryption, but good quota support. A regular directory for each user, also located in /home/*.homedir. This provides no encryption, but is a suitable fallback available on all machines, even where LUKS2, fscrypt or btrfs support is not available. An individual Windows file share (CIFS) for each user. Note that systemd-homed.service and homectl will not manage "classic" UNIX user accounts as created with useradd8 or similar tools. In particular, this functionality is not suitable for managing system users (i.e. users with a UID below 1000) but is exclusive to regular ("human") users. Note that users/home directories managed via systemd-homed.service do not show up in /etc/passwd and similar files, they are synthesized via glibc NSS during runtime. They are thus resolvable and may be enumerated via the getent1 tool. This tool interfaces directly with systemd-homed.service, and may execute specific commands on the home directories it manages. Since every home directory managed that way also defines a JSON user and group record these home directories may also be inspected and enumerated via userdbctl1. Home directories managed by systemd-homed.service are usually in one of two states, or in a transition state between them: when active they are unlocked and mounted, and thus accessible to the system and its programs; when inactive they are not mounted and thus not accessible. Activation happens automatically at login of the user and usually can only complete after a password (or other authentication token) has been supplied. Deactivation happens after the user fully logged out. A home directory remains active as long as the user is logged in at least once, i.e. has at least one login session. When the user logs in a second time simultaneously the home directory remains active. It is deactivated only after the last of the user's sessions ends. The following general options are understood (further options that control the various properties of user records managed by systemd-homed.service are documented further down): --identity=FILE Read the user's JSON record from the specified file. If passed as - read the user record from standard input. The supplied JSON object must follow the structure documented in JSON User Records. This option may be used in conjunction with the create and update commands (see below), where it allows configuring the user record in JSON as-is, instead of setting the individual user record properties (see below). --json=FORMAT -j Controls whether to output the user record in JSON format, if the inspect command (see below) is used. Takes one of pretty, short or off. If pretty human-friendly whitespace and newlines are inserted in the output to make the JSON data more readable. If short all superfluous whitespace is suppressed. If off (the default) the user information is not shown in JSON format but in a friendly human readable formatting instead. The -j option picks pretty when run interactively and short otherwise. --export-format=FORMAT -E -EE When used with the inspect verb in JSON mode (see above) may be used to suppress certain aspects of the JSON user record on output. Specifically, if stripped format is used the binding and runtime fields of the record are removed. If minimal format is used the cryptographic signature is removed too. If full format is used the full JSON record is shown (this is the default). This option is useful for copying an existing user record to a different system in order to create a similar user there with the same settings. Specifically: homectl inspect -EE | ssh root@othersystem homectl create -i- may be used as simple command line for replicating a user on another host. -E is equivalent to -j --export-format=stripped, -EE to -j --export-format=minimal. Note that when replicating user accounts user records acquired in stripped mode will retain the original cryptographic signatures and thus may only be modified when the private key to update them is available on the destination machine. When replicating users in minimal mode, the signature is removed during the replication and thus the record will be implicitly signed with the key of the destination machine and may be updated there without any private key replication. The following options control various properties of the user records/home directories that systemd-homed.service manages. These switches may be used in conjunction with the create and update commands for configuring various aspects of the home directory and the user account: --real-name=NAME -c NAME The real name for the user. This corresponds with the GECOS field on classic UNIX NSS records. --realm=REALM The realm for the user. The realm associates a user with a specific organization or installation, and allows distinguishing users of the same name defined in different contexts. The realm can be any string that also qualifies as valid DNS domain name, and it is recommended to use the organization's or installation's domain name for this purpose, but this is not enforced nor required. On each system only a single user of the same name may exist, and if a user with the same name and realm is seen it is assumed to refer to the same user while a user with the same name but different realm is considered a different user. Note that this means that two users sharing the same name but with distinct realms are not allowed on the same system. Assigning a realm to a user is optional. --email-address=EMAIL Takes an electronic mail address to associate with the user. On log-in the $EMAIL environment variable is initialized from this value. --location=TEXT Takes location specification for this user. This is free-form text, which might or might not be usable by geo-location applications. Example: --location="Berlin, Germany" or --location="Basement, Room 3a" --icon-name=ICON Takes an icon name to associate with the user, following the scheme defined by the Icon Naming Specification. --home-dir=PATH -dPATH Takes a path to use as home directory for the user. Note that this is the directory the user's home directory is mounted to while the user is logged in. This is not where the user's data is actually stored, see --image-path= for that. If not specified defaults to /home/$USER. --uid=UID Takes a preferred numeric UNIX UID to assign this user. If a user is to be created with the specified UID and it is already taken by a different user on the local system then creation of the home directory is refused. Note though, if after creating the home directory it is used on a different system and the configured UID is taken by another user there, then systemd-homed may assign the user a different UID on that system. The specified UID must be outside of the system user range. It is recommended to use the 60001…60513 UID range for this purpose. If not specified, the UID is automatically picked. If the home directory is found to be owned by a different UID when logging in, the home directory and everything underneath it will have its ownership changed automatically before login completes. Note that changing this option for existing home directories generally has no effect on home directories that already have been registered locally (have a local binding), as the UID used for an account on the local system is determined when the home directory is first activated on it, and then remains in effect until the home directory is removed. Note that users managed by systemd-homed always have a matching group associated with the same name as well as a GID matching the UID of the user. Thus, configuring the GID separately is not permitted. --member-of=GROUP -G GROUP Takes a comma-separated list of auxiliary UNIX groups this user shall belong to. Example: --member-of=wheel to provide the user with administrator privileges. Note that systemd-homed does not manage any groups besides a group matching the user in name and numeric UID/GID. Thus any groups listed here must be registered independently, for example with groupadd8. Any non-existent groups are ignored. This option may be used more than once, in which case all specified group lists are combined. If the user is currently a member of a group which is not listed, the user will be removed from the group. --skel=PATH Takes a file system path to a directory. Specifies the skeleton directory to initialize the home directory with. All files and directories in the specified path are copied into any newly create home directory. If not specified defaults to /etc/skel/. --shell=SHELL Takes a file system path. Specifies the shell binary to execute on terminal logins. If not specified defaults to /bin/bash. --setenv=VARIABLE[=VALUE] Takes an environment variable assignment to set for all user processes. May be used multiple times to set multiple environment variables. When = and VALUE are omitted, the value of the variable with the same name in the program environment will be used. Note that a number of other settings also result in environment variables to be set for the user, including --email=, --timezone= and --language=. --timezone=TIMEZONE Takes a time zone location name that sets the timezone for the specified user. When the user logs in the $TZ environment variable is initialized from this setting. Example: --timezone=Europe/Amsterdam will result in the environment variable TZ=:Europe/Amsterdam. (: is used intentionally as part of the timezone specification, see tzset3.) --language=LANG Takes a specifier indicating the preferred language of the user. The $LANG environment variable is initialized from this value on login, and thus a value suitable for this environment variable is accepted here, for example --language=de_DE.UTF8. --ssh-authorized-keys=KEYS Either takes a SSH authorized key line to associate with the user record or a @ character followed by a path to a file to read one or more such lines from. SSH keys configured this way are made available to SSH to permit access to this home directory and user record. This option may be used more than once to configure multiple SSH keys. --pkcs11-token-uri=URI Takes an RFC 7512 PKCS#11 URI referencing a security token (e.g. YubiKey or PIV smartcard) that shall be able to unlock the user account. The security token URI should reference a security token with exactly one pair of X.509 certificate and private key. A random secret key is then generated, encrypted with the public key of the X.509 certificate, and stored as part of the user record. At login time it is decrypted with the PKCS#11 module and then used to unlock the account and associated resources. See below for an example how to set up authentication with a security token. Instead of a valid PKCS#11 URI, the special strings list and auto may be specified. If list is passed, a brief table of suitable, currently plugged in PKCS#11 hardware tokens is shown, along with their URIs. If auto is passed, a suitable PKCS#11 hardware token is automatically selected (this operation will fail if there isn't exactly one suitable token discovered). The latter is a useful shortcut for the most common case where a single PKCS#11 hardware token is plugged in. Note that many hardware security tokens implement both PKCS#11/PIV and FIDO2 with the hmac-secret extension (for example: the YubiKey 5 series), as supported with the --fido2-device= option below. Both mechanisms are similarly powerful, though FIDO2 is the more modern technology. PKCS#11/PIV tokens have the benefit of being recognizable before authentication and hence can be used for implying the user identity to use for logging in, which FIDO2 does not allow. PKCS#11/PIV devices generally require initialization (i.e. storing a private/public key pair on them, see example below) before they can be used; FIDO2 security tokens generally do not required that, and work out of the box. --fido2-credential-algorithm=STRING Specify COSE algorithm used in credential generation. The default value is es256. Supported values are es256, rs256 and eddsa. es256 denotes ECDSA over NIST P-256 with SHA-256. rs256 denotes 2048-bit RSA with PKCS#1.5 padding and SHA-256. eddsa denotes EDDSA over Curve25519 with SHA-512. Note that your authenticator may not support some algorithms. --fido2-device=PATH Takes a path to a Linux hidraw device (e.g. /dev/hidraw1), referring to a FIDO2 security token implementing the hmac-secret extension that shall be able to unlock the user account. A random salt value is generated on the host and passed to the FIDO2 device, which calculates a HMAC hash of the salt using an internal secret key. The result is then used as the key to unlock the user account. The random salt is included in the user record, so that whenever authentication is needed it can be passed to the FIDO2 token again. Instead of a valid path to a FIDO2 hidraw device the special strings list and auto may be specified. If list is passed, a brief table of suitable discovered FIDO2 devices is shown. If auto is passed, a suitable FIDO2 token is automatically selected, if exactly one is discovered. The latter is a useful shortcut for the most common case where a single FIDO2 hardware token is plugged in. Note that FIDO2 devices suitable for this option must implement the hmac-secret extension. Most current devices (such as the YubiKey 5 series) do. If the extension is not implemented the device cannot be used for unlocking home directories. The FIDO2 device may be subsequently removed by setting the device path to an empty string (e.g. homectl update $USER --fido2-device=""). Note that many hardware security tokens implement both FIDO2 and PKCS#11/PIV (and thus may be used with either --fido2-device= or --pkcs11-token-uri=), for a discussion see above. --fido2-with-client-pin=BOOL When enrolling a FIDO2 security token, controls whether to require the user to enter a PIN when unlocking the account (the FIDO2 clientPin feature). Defaults to yes. (Note: this setting is without effect if the security token does not support the clientPin feature at all, or does not allow enabling or disabling it.) --fido2-with-user-presence=BOOL When enrolling a FIDO2 security token, controls whether to require the user to verify presence (tap the token, the FIDO2 up feature) when unlocking the account. Defaults to yes. (Note: this setting is without effect if the security token does not support the up feature at all, or does not allow enabling or disabling it.) --fido2-with-user-verification=BOOL When enrolling a FIDO2 security token, controls whether to require user verification when unlocking the account (the FIDO2 uv feature). Defaults to no. (Note: this setting is without effect if the security token does not support the uv feature at all, or does not allow enabling or disabling it.) --recovery-key=BOOL Accepts a boolean argument. If enabled a recovery key is configured for the account. A recovery key is a computer generated access key that may be used to regain access to an account if the password has been forgotten or the authentication token lost. The key is generated and shown on screen, and should be printed or otherwise transferred to a secure location. A recovery key may be entered instead of a regular password to unlock the account. --locked=BOOLEAN Takes a boolean argument. Specifies whether this user account shall be locked. If true logins into this account are prohibited, if false (the default) they are permitted (of course, only if authorization otherwise succeeds). --not-before=TIMESTAMP --not-after=TIMESTAMP These options take a timestamp string, in the format documented in systemd.time7 and configures points in time before and after logins into this account are not permitted. --rate-limit-interval=SECS --rate-limit-burst=NUMBER Configures a rate limit on authentication attempts for this user. If the user attempts to authenticate more often than the specified number, on a specific system, within the specified time interval authentication is refused until the time interval passes. Defaults to 10 times per 1min. --password-hint=TEXT Takes a password hint to store alongside the user record. This string is stored accessible only to privileged users and the user itself and may not be queried by other users. Example: --password-hint="My first pet's name". --enforce-password-policy=BOOL -P Takes a boolean argument. Configures whether to enforce the system's password policy for this user, regarding quality and strength of selected passwords. Defaults to on. -P is short for ---enforce-password-policy=no. --password-change-now=BOOL Takes a boolean argument. If true the user is asked to change their password on next login. --password-change-min=TIME --password-change-max=TIME --password-change-warn=TIME --password-change-inactive=TIME Each of these options takes a time span specification as argument (in the syntax documented in systemd.time7) and configures various aspects of the user's password expiration policy. Specifically, --password-change-min= configures how much time has to pass after changing the password of the user until the password may be changed again. If the user tries to change their password before this time passes the attempt is refused. --password-change-max= configures how soon after it has been changed the password expires and needs to be changed again. After this time passes logging in may only proceed after the password is changed. --password-change-warn= specifies how much earlier than then the time configured with --password-change-max= the user is warned at login to change their password as it will expire soon. Finally --password-change-inactive= configures the time which has to pass after the password as expired until the user is not permitted to log in or change the password anymore. Note that these options only apply to password authentication, and do not apply to other forms of authentication, for example PKCS#11-based security token authentication. --disk-size=BYTES Either takes a size in bytes as argument (possibly using the usual K, M, G, … suffixes for 1024 base values), a percentage value, or the special strings min or max, and configures the disk space to assign to the user. If a percentage value is specified (i.e. the argument suffixed with %) it is taken relative to the available disk space of the backing file system. If specified as min assigns the minimal disk space permitted by the constraints of the backing file system and other limits, when specified as max assigns the maximum disk space available. If the LUKS2 backend is used this configures the size of the loopback file and file system contained therein. For the other storage backends configures disk quota using the filesystem's native quota logic, if available. If not specified, defaults to 85% of the available disk space for the LUKS2 backend and to no quota for the others. --access-mode=MODE Takes a UNIX file access mode written in octal. Configures the access mode of the home directory itself. Note that this is only used when the directory is first created, and the user may change this any time afterwards. Example: --access-mode=0700 --umask=MASK Takes the access mode mask (in octal syntax) to apply to newly created files and directories of the user ("umask"). If set this controls the initial umask set for all login sessions of the user, possibly overriding the system's defaults. --nice=NICE Takes the numeric scheduling priority ("nice level") to apply to the processes of the user at login time. Takes a numeric value in the range -20 (highest priority) to 19 (lowest priority). --rlimit=LIMIT=VALUE:VALUE Allows configuration of resource limits for processes of this user, see getrlimit2 for details. Takes a resource limit name (e.g. LIMIT_NOFILE) followed by an equal sign, followed by a numeric limit. Optionally, separated by colon a second numeric limit may be specified. If two are specified this refers to the soft and hard limits, respectively. If only one limit is specified the setting sets both limits in one. --tasks-max=TASKS Takes a non-zero unsigned integer as argument. Configures the maximum number of tasks (i.e. threads, where each process is at least one thread) the user may have at any given time. This limit applies to all tasks forked off the user's sessions, even if they change user identity via su1 or a similar tool. Use --rlimit=LIMIT_NPROC= to place a limit on the tasks actually running under the UID of the user, thus excluding any child processes that might have changed user identity. This controls the TasksMax= setting of the per-user systemd slice unit user-$UID.slice. See systemd.resource-control5 for further details. --memory-high=BYTES --memory-max=BYTES Set a limit on the memory a user may take up on a system at any given time in bytes (the usual K, M, G, … suffixes are supported, to the base of 1024). This includes all memory used by the user itself and all processes they forked off that changed user credentials. This controls the MemoryHigh= and MemoryMax= settings of the per-user systemd slice unit user-$UID.slice. See systemd.resource-control5 for further details. --cpu-weight=WEIGHT --io-weight=WEIGHT Set CPU and IO scheduling weights of the processes of the user, including those of processes forked off by the user that changed user credentials. Takes a numeric value in the range 1…10000. This controls the CPUWeight= and IOWeight= settings of the per-user systemd slice unit user-$UID.slice. See systemd.resource-control5 for further details. --storage=STORAGE Selects the storage mechanism to use for this home directory. Takes one of luks, fscrypt, directory, subvolume, cifs. For details about these mechanisms, see above. If a new home directory is created and the storage type is not specifically specified, homed.conf5 defines which default storage to use. --image-path=PATH Takes a file system path. Configures where to place the user's home directory. When LUKS2 storage is used refers to the path to the loopback file, otherwise to the path to the home directory (which may be in /home/ or any other accessible filesystem). When unspecified defaults to /home/$USER.home when LUKS storage is used and /home/$USER.homedir for the other storage mechanisms. Not defined for the cifs storage mechanism. To use LUKS2 storage on a regular block device (for example a USB stick) pass the path to the block device here. Specifying the path to a directory here when using LUKS2 storage is not allowed. Similar, specifying the path to a regular file or device node is not allowed if any of the other storage backends are used. --drop-caches=BOOL Automatically flush OS file system caches on logout. This is useful in combination with the fscrypt storage backend to ensure the OS does not keep decrypted versions of the files and directories in memory (and accessible) after logout. This option is also supported on other backends, but should not bring any benefit there. Defaults to off, except if the selected storage backend is fscrypt, where it defaults to on. Note that flushing OS caches will negatively influence performance of the OS shortly after logout. --fs-type=TYPE When LUKS2 storage is used configures the file system type to use inside the home directory LUKS2 container. One of btrfs, ext4, xfs. If not specified homed.conf5 defines which default file system type to use. Note that xfs is not recommended as its support for file system resizing is too limited. --luks-discard=BOOL When LUKS2 storage is used configures whether to enable the discard feature of the file system. If enabled the file system on top of the LUKS2 volume will report empty block information to LUKS2 and the loopback file below, ensuring that empty space in the home directory is returned to the backing file system below the LUKS2 volume, resulting in a "sparse" loopback file. This option mostly defaults to off, since this permits over-committing home directories which results in I/O errors if the underlying file system runs full while the upper file system wants to allocate a block. Such I/O errors are generally not handled well by file systems nor applications. When LUKS2 storage is used on top of regular block devices (instead of on top a loopback file) the discard logic defaults to on. --luks-offline-discard=BOOL Similar to --luks-discard=, controls the trimming of the file system. However, while --luks-discard= controls what happens when the home directory is active, --luks-offline-discard= controls what happens when it becomes inactive, i.e. whether to trim/allocate the storage when deactivating the home directory. This option defaults to on, to ensure disk space is minimized while a user is not logged in. --luks-extra-mount-options=OPTIONS Takes a string containing additional mount options to use when mounting the LUKS volume. If specified, this string will be appended to the default, built-in mount options. --luks-cipher=CIPHER --luks-cipher-mode=MODE --luks-volume-key-size=BYTES --luks-pbkdf-type=TYPE --luks-pbkdf-hash-algorithm=ALGORITHM --luks-pbkdf-time-cost=SECONDS --luks-pbkdf-memory-cost=BYTES --luks-pbkdf-parallel-threads=THREADS --luks-sector-size=BYTES Configures various cryptographic parameters for the LUKS2 storage mechanism. See cryptsetup8 for details on the specific attributes. Note that homectl uses bytes for key size, like /proc/crypto, but cryptsetup8 uses bits. --auto-resize-mode= Configures whether to automatically grow and/or shrink the backing file system on login and logout. Takes one of the strings off, grow, shrink-and-grow. Only applies to the LUKS2 backend currently, and if the btrfs file system is used inside it (since only then online growing/shrinking of the file system is supported). Defaults to shrink-and-grow, if LUKS2/btrfs is used, otherwise is off. If set to off no automatic shrinking/growing during login or logout is done. If set to grow the home area is grown to the size configured via --disk-size= should it currently be smaller. If it already matches the configured size or is larger no operation is executed. If set to shrink-and-grow the home area is also resized during logout to the minimal size the used disk space and file system constraints permit. This mode thus ensures that while a home area is activated it is sized to the configured size, but while deactivated it is compacted taking up only the minimal space possible. Note that if the system is powered off abnormally or if the user otherwise not logged out cleanly the shrinking operation will not take place, and the user has to re-login/logout again before it is executed again. --rebalance-weight= Configures the weight parameter for the free disk space rebalancing logic. Only applies to the LUKS2 backend (since for the LUKS2 backend disk space is allocated from a per-user loopback file system instead of immediately from a common pool like the other backends do it). In regular intervals free disk space in the active home areas and their backing storage is redistributed among them, taking the weight value configured here into account. Expects an integer in the range 1…10000, or the special string off. If not specified defaults to 100. The weight is used to scale free space made available to the home areas: a home area with a weight of 200 will get twice the free space as one with a weight of 100; a home area with a weight of 50 will get half of that. The backing file system will be assigned space for a weight of 20. If set to off no automatic free space distribution is done for this home area. Note that resizing the home area explicitly (with homectl resize see below) will implicitly turn off the automatic rebalancing. To reenable the automatic rebalancing use --rebalance-weight= with an empty parameter. --nosuid=BOOL --nodev=BOOL --noexec=BOOL Configures the nosuid, nodev and noexec mount options for the home directories. By default nodev and nosuid are on, while noexec is off. For details about these mount options see mount8. --cifs-domain=DOMAIN --cifs-user-name=USER --cifs-service=SERVICE --cifs-extra-mount-options=OPTIONS Configures the Windows File Sharing (CIFS) domain and user to associate with the home directory/user account, as well as the file share ("service") to mount as directory. The latter is used when cifs storage is selected. The file share should be specified in format //host/share/directory/…. The directory part is optional — if not specified the home directory will be placed in the top-level directory of the share. The --cifs-extra-mount-options= setting allows specifying additional mount options when mounting the share, see mount.cifs8 for details. --stop-delay=SECS Configures the time the per-user service manager shall continue to run after the all sessions of the user ended. The default is configured in logind.conf5 (for home directories of LUKS2 storage located on removable media this defaults to 0 though). A longer time makes sure quick, repetitive logins are more efficient as the user's service manager doesn't have to be started every time. --kill-processes=BOOL Configures whether to kill all processes of the user on logout. The default is configured in logind.conf5. --auto-login=BOOL Takes a boolean argument. Configures whether the graphical UI of the system should automatically log this user in if possible. Defaults to off. If less or more than one user is marked this way automatic login is disabled. The following commands are understood: list List all home directories (along with brief details) currently managed by systemd-homed.service. This command is also executed if none is specified on the command line. (Note that the list of users shown by this command does not include users managed by other subsystems, such as system users or any traditional users listed in /etc/passwd.) activate USER [USER…] Activate one or more home directories. The home directories of each listed user will be activated and made available under their mount points (typically in /home/$USER). Note that any home activated this way stays active indefinitely, until it is explicitly deactivated again (with deactivate, see below), or the user logs in and out again and it thus is deactivated due to the automatic deactivation-on-logout logic. Activation of a home directory involves various operations that depend on the selected storage mechanism. If the LUKS2 mechanism is used, this generally involves: inquiring the user for a password, setting up a loopback device, validating and activating the LUKS2 volume, checking the file system, mounting the file system, and potentially changing the ownership of all included files to the correct UID/GID. deactivate USER [USER…] Deactivate one or more home directories. This undoes the effect of activate. inspect USER [USER…] Show various details about the specified home directories. This shows various information about the home directory and its user account, including runtime data such as current state, disk use and similar. Combine with --json= to show the detailed JSON user record instead, possibly combined with --export-format= to suppress certain aspects of the output. authenticate USER [USER…] Validate authentication credentials of a home directory. This queries the caller for a password (or similar) and checks that it correctly unlocks the home directory. This leaves the home directory in the state it is in, i.e. it leaves the home directory in inactive state if it was inactive before, and in active state if it was active before. create USER create --identity=PATH USER Create a new home directory/user account of the specified name. Use the various user record property options (as documented above) to control various aspects of the home directory and its user accounts. The specified user name should follow the strict syntax described on User/Group Name Syntax. remove USER Remove a home directory/user account. This will remove both the home directory's user record and the home directory itself, and thus delete all files and directories owned by the user. update USER update --identity=PATH USER Update a home directory/user account. Use the various user record property options (as documented above) to make changes to the account, or alternatively provide a full, updated JSON user record via the --identity= option. Note that changes to user records not signed by a cryptographic private key available locally are not permitted, unless --identity= is used with a user record that is already correctly signed by a recognized private key. passwd USER Change the password of the specified home directory/user account. resize USER BYTES Change the disk space assigned to the specified home directory. If the LUKS2 storage mechanism is used this will automatically resize the loopback file and the file system contained within. Note that if ext4 is used inside of the LUKS2 volume, it is necessary to deactivate the home directory before shrinking it (i.e the user has to log out). Growing can be done while the home directory is active. If xfs is used inside of the LUKS2 volume the home directory may not be shrunk whatsoever. On all three of ext4, xfs and btrfs the home directory may be grown while the user is logged in, and on the latter also shrunk while the user is logged in. If the subvolume, directory, fscrypt storage mechanisms are used, resizing will change file system quota. The size parameter may make use of the usual suffixes B, K, M, G, T (to the base of 1024). The special strings min and max may be specified in place of a numeric size value, for minimizing or maximizing disk space assigned to the home area, taking constraints of the file system, disk usage inside the home area and on the backing storage into account. lock USER Temporarily suspend access to the user's home directory and remove any associated cryptographic keys from memory. Any attempts to access the user's home directory will stall until the home directory is unlocked again (i.e. re-authenticated). This functionality is primarily intended to be used during system suspend to make sure the user's data cannot be accessed until the user re-authenticates on resume. This operation is only defined for home directories that use the LUKS2 storage mechanism. unlock USER Resume access to the user's home directory again, undoing the effect of lock above. This requires authentication of the user, as the cryptographic keys required for access to the home directory need to be reacquired. lock-all Execute the lock command on all suitable home directories at once. This operation is generally executed on system suspend (i.e. by systemctl suspend and related commands), to ensure all active user's cryptographic keys for accessing their home directories are removed from memory. deactivate-all Execute the deactivate command on all active home directories at once. This operation is generally executed on system shut down (i.e. by systemctl poweroff and related commands), to ensure all active user's home directories are fully deactivated before /home/ and related file systems are unmounted. with USER COMMAND… Activate the specified user's home directory, run the specified command (under the caller's identity, not the specified user's) and deactivate the home directory afterwards again (unless the user is logged in otherwise). This command is useful for running privileged backup scripts and such, but requires authentication with the user's credentials in order to be able to unlock the user's home directory. rebalance Rebalance free disk space between active home areas and the backing storage. See --rebalance-weight= above. This executes no operation unless there's at least one active LUKS2 home area that has disk space rebalancing enabled. This operation is synchronous: it will only complete once disk space is rebalanced according to the rebalancing weights. Note that rebalancing also takes place automatically in the background in regular intervals. Use this command to synchronously ensure disk space is properly redistributed before initiating an operation requiring large amounts of disk space. On success, 0 is returned, a non-zero failure code otherwise. When a command is invoked with with, the exit status of the child is propagated. Effectively, homectl will exit without error if the command is successfully invoked and finishes successfully. homectl create waldo --real-name="Waldo McWaldo" -G wheel --disk-size=500M homectl create wally --real-name="Wally McWally" --image-path=/dev/disk/by-id/usb-SanDisk_Ultra_Fit_476fff954b2b5c44-0:0 --tasks-max=500 homectl update odlaw --nice=5 --setenv=SOME=THING # Clear the Yubikey from any old keys (careful!) ykman piv reset # Generate a new private/public key pair on the device, store the public key in 'pubkey.pem'. ykman piv generate-key -a RSA2048 9d pubkey.pem # Create a self-signed certificate from this public key, and store it on the device. ykman piv generate-certificate --subject "Knobelei" 9d pubkey.pem # We don't need the public key on disk anymore rm pubkey.pem # Allow the security token to unlock the account of user 'lafcadio'. homectl update lafcadio --pkcs11-token-uri=auto # Allow a FIDO2 security token to unlock the account of user 'nihilbaxter'. homectl update nihilbaxter --fido2-device=auto systemd1, systemd-homed.service8, homed.conf5, userdbctl1, useradd8, cryptsetup8