summaryrefslogtreecommitdiffstats
path: root/debian/config-dir/sites-available/default-ssl.conf
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--debian/config-dir/sites-available/default-ssl.conf130
1 files changed, 130 insertions, 0 deletions
diff --git a/debian/config-dir/sites-available/default-ssl.conf b/debian/config-dir/sites-available/default-ssl.conf
new file mode 100644
index 0000000..330280d
--- /dev/null
+++ b/debian/config-dir/sites-available/default-ssl.conf
@@ -0,0 +1,130 @@
+<VirtualHost *:443>
+ ServerAdmin webmaster@localhost
+
+ DocumentRoot /var/www/html
+
+ # Available loglevels: trace8, ..., trace1, debug, info, notice, warn,
+ # error, crit, alert, emerg.
+ # It is also possible to configure the loglevel for particular
+ # modules, e.g.
+ #LogLevel info ssl:warn
+
+ ErrorLog ${APACHE_LOG_DIR}/error.log
+ CustomLog ${APACHE_LOG_DIR}/access.log combined
+
+ # For most configuration files from conf-available/, which are
+ # enabled or disabled at a global level, it is possible to
+ # include a line for only one particular virtual host. For example the
+ # following line enables the CGI configuration for this host only
+ # after it has been globally disabled with "a2disconf".
+ #Include conf-available/serve-cgi-bin.conf
+
+ # SSL Engine Switch:
+ # Enable/Disable SSL for this virtual host.
+ SSLEngine on
+
+ # A self-signed (snakeoil) certificate can be created by installing
+ # the ssl-cert package. See
+ # /usr/share/doc/apache2/README.Debian.gz for more info.
+ # If both key and certificate are stored in the same file, only the
+ # SSLCertificateFile directive is needed.
+ SSLCertificateFile /etc/ssl/certs/ssl-cert-snakeoil.pem
+ SSLCertificateKeyFile /etc/ssl/private/ssl-cert-snakeoil.key
+
+ # Server Certificate Chain:
+ # Point SSLCertificateChainFile at a file containing the
+ # concatenation of PEM encoded CA certificates which form the
+ # certificate chain for the server certificate. Alternatively
+ # the referenced file can be the same as SSLCertificateFile
+ # when the CA certificates are directly appended to the server
+ # certificate for convinience.
+ #SSLCertificateChainFile /etc/apache2/ssl.crt/server-ca.crt
+
+ # Certificate Authority (CA):
+ # Set the CA certificate verification path where to find CA
+ # certificates for client authentication or alternatively one
+ # huge file containing all of them (file must be PEM encoded)
+ # Note: Inside SSLCACertificatePath you need hash symlinks
+ # to point to the certificate files. Use the provided
+ # Makefile to update the hash symlinks after changes.
+ #SSLCACertificatePath /etc/ssl/certs/
+ #SSLCACertificateFile /etc/apache2/ssl.crt/ca-bundle.crt
+
+ # Certificate Revocation Lists (CRL):
+ # Set the CA revocation path where to find CA CRLs for client
+ # authentication or alternatively one huge file containing all
+ # of them (file must be PEM encoded)
+ # Note: Inside SSLCARevocationPath you need hash symlinks
+ # to point to the certificate files. Use the provided
+ # Makefile to update the hash symlinks after changes.
+ #SSLCARevocationPath /etc/apache2/ssl.crl/
+ #SSLCARevocationFile /etc/apache2/ssl.crl/ca-bundle.crl
+
+ # Client Authentication (Type):
+ # Client certificate verification type and depth. Types are
+ # none, optional, require and optional_no_ca. Depth is a
+ # number which specifies how deeply to verify the certificate
+ # issuer chain before deciding the certificate is not valid.
+ #SSLVerifyClient require
+ #SSLVerifyDepth 10
+
+ # SSL Engine Options:
+ # Set various options for the SSL engine.
+ # o FakeBasicAuth:
+ # Translate the client X.509 into a Basic Authorisation. This means that
+ # the standard Auth/DBMAuth methods can be used for access control. The
+ # user name is the `one line' version of the client's X.509 certificate.
+ # Note that no password is obtained from the user. Every entry in the user
+ # file needs this password: `xxj31ZMTZzkVA'.
+ # o ExportCertData:
+ # This exports two additional environment variables: SSL_CLIENT_CERT and
+ # SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
+ # server (always existing) and the client (only existing when client
+ # authentication is used). This can be used to import the certificates
+ # into CGI scripts.
+ # o StdEnvVars:
+ # This exports the standard SSL/TLS related `SSL_*' environment variables.
+ # Per default this exportation is switched off for performance reasons,
+ # because the extraction step is an expensive operation and is usually
+ # useless for serving static content. So one usually enables the
+ # exportation for CGI and SSI requests only.
+ # o OptRenegotiate:
+ # This enables optimized SSL connection renegotiation handling when SSL
+ # directives are used in per-directory context.
+ #SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
+ <FilesMatch "\.(?:cgi|shtml|phtml|php)$">
+ SSLOptions +StdEnvVars
+ </FilesMatch>
+ <Directory /usr/lib/cgi-bin>
+ SSLOptions +StdEnvVars
+ </Directory>
+
+ # SSL Protocol Adjustments:
+ # The safe and default but still SSL/TLS standard compliant shutdown
+ # approach is that mod_ssl sends the close notify alert but doesn't wait for
+ # the close notify alert from client. When you need a different shutdown
+ # approach you can use one of the following variables:
+ # o ssl-unclean-shutdown:
+ # This forces an unclean shutdown when the connection is closed, i.e. no
+ # SSL close notify alert is send or allowed to received. This violates
+ # the SSL/TLS standard but is needed for some brain-dead browsers. Use
+ # this when you receive I/O errors because of the standard approach where
+ # mod_ssl sends the close notify alert.
+ # o ssl-accurate-shutdown:
+ # This forces an accurate shutdown when the connection is closed, i.e. a
+ # SSL close notify alert is send and mod_ssl waits for the close notify
+ # alert of the client. This is 100% SSL/TLS standard compliant, but in
+ # practice often causes hanging connections with brain-dead browsers. Use
+ # this only for browsers where you know that their SSL implementation
+ # works correctly.
+ # Notice: Most problems of broken clients are also related to the HTTP
+ # keep-alive facility, so you usually additionally want to disable
+ # keep-alive for those clients, too. Use variable "nokeepalive" for this.
+ # Similarly, one has to force some clients to use HTTP/1.0 to workaround
+ # their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
+ # "force-response-1.0" for this.
+ # BrowserMatch "MSIE [2-6]" \
+ # nokeepalive ssl-unclean-shutdown \
+ # downgrade-1.0 force-response-1.0
+
+</VirtualHost>